diff options
Diffstat (limited to 'Documentation/networking/device_drivers/ethernet/ti')
| -rw-r--r-- | Documentation/networking/device_drivers/ethernet/ti/cpsw.rst | 6 | ||||
| -rw-r--r-- | Documentation/networking/device_drivers/ethernet/ti/icssg_prueth.rst | 56 |
2 files changed, 59 insertions, 3 deletions
diff --git a/Documentation/networking/device_drivers/ethernet/ti/cpsw.rst b/Documentation/networking/device_drivers/ethernet/ti/cpsw.rst index a88946bd188b..d3e130455043 100644 --- a/Documentation/networking/device_drivers/ethernet/ti/cpsw.rst +++ b/Documentation/networking/device_drivers/ethernet/ti/cpsw.rst @@ -268,14 +268,14 @@ Example 1: One port tx AVB configuration scheme for target board // Run your appropriate tools with socket option "SO_PRIORITY" // to 3 for class A and/or to 2 for class B - // (I took at https://www.spinics.net/lists/netdev/msg460869.html) + // (I took at https://lore.kernel.org/r/20171017010128.22141-1-vinicius.gomes@intel.com/) ./tsn_talker -d 18:03:73:66:87:42 -i eth0.100 -p3 -s 1500& ./tsn_talker -d 18:03:73:66:87:42 -i eth0.100 -p2 -s 1500& 13) :: // run your listener on workstation (should be in same vlan) - // (I took at https://www.spinics.net/lists/netdev/msg460869.html) + // (I took at https://lore.kernel.org/r/20171017010128.22141-1-vinicius.gomes@intel.com/) ./tsn_listener -d 18:03:73:66:87:42 -i enp5s0 -s 1500 Receiving data rate: 39012 kbps Receiving data rate: 39012 kbps @@ -555,7 +555,7 @@ Example 2: Two port tx AVB configuration scheme for target board 20) :: // run your listener on workstation (should be in same vlan) - // (I took at https://www.spinics.net/lists/netdev/msg460869.html) + // (I took at https://lore.kernel.org/r/20171017010128.22141-1-vinicius.gomes@intel.com/) ./tsn_listener -d 18:03:73:66:87:42 -i enp5s0 -s 1500 Receiving data rate: 39012 kbps Receiving data rate: 39012 kbps diff --git a/Documentation/networking/device_drivers/ethernet/ti/icssg_prueth.rst b/Documentation/networking/device_drivers/ethernet/ti/icssg_prueth.rst new file mode 100644 index 000000000000..da21ddf431bb --- /dev/null +++ b/Documentation/networking/device_drivers/ethernet/ti/icssg_prueth.rst @@ -0,0 +1,56 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============================================== +Texas Instruments ICSSG PRUETH ethernet driver +============================================== + +:Version: 1.0 + +ICSSG Firmware +============== + +Every ICSSG core has two Programmable Real-Time Unit(PRUs), two auxiliary +Real-Time Transfer Unit (RTUs), and two Transmit Real-Time Transfer Units +(TX_PRUs). Each one of these runs its own firmware. The firmwares combnined are +referred as ICSSG Firmware. + +Firmware Statistics +=================== + +The ICSSG firmware maintains certain statistics which are dumped by the driver +via ``ethtool -S <interface>`` + +These statistics are as follows, + + - ``FW_RTU_PKT_DROP``: Diagnostic error counter which increments when RTU drops a locally injected packet due to port being disabled or rule violation. + - ``FW_Q0_OVERFLOW``: TX overflow counter for queue0 + - ``FW_Q1_OVERFLOW``: TX overflow counter for queue1 + - ``FW_Q2_OVERFLOW``: TX overflow counter for queue2 + - ``FW_Q3_OVERFLOW``: TX overflow counter for queue3 + - ``FW_Q4_OVERFLOW``: TX overflow counter for queue4 + - ``FW_Q5_OVERFLOW``: TX overflow counter for queue5 + - ``FW_Q6_OVERFLOW``: TX overflow counter for queue6 + - ``FW_Q7_OVERFLOW``: TX overflow counter for queue7 + - ``FW_DROPPED_PKT``: This counter is incremented when a packet is dropped at PRU because of rule violation. + - ``FW_RX_ERROR``: Incremented if there was a CRC error or Min/Max frame error at PRU + - ``FW_RX_DS_INVALID``: Incremented when RTU detects Data Status invalid condition + - ``FW_TX_DROPPED_PACKET``: Counter for packets dropped via TX Port + - ``FW_TX_TS_DROPPED_PACKET``: Counter for packets with TS flag dropped via TX Port + - ``FW_INF_PORT_DISABLED``: Incremented when RX frame is dropped due to port being disabled + - ``FW_INF_SAV``: Incremented when RX frame is dropped due to Source Address violation + - ``FW_INF_SA_DL``: Incremented when RX frame is dropped due to Source Address being in the denylist + - ``FW_INF_PORT_BLOCKED``: Incremented when RX frame is dropped due to port being blocked and frame being a special frame + - ``FW_INF_DROP_TAGGED`` : Incremented when RX frame is dropped for being tagged + - ``FW_INF_DROP_PRIOTAGGED``: Incremented when RX frame is dropped for being priority tagged + - ``FW_INF_DROP_NOTAG``: Incremented when RX frame is dropped for being untagged + - ``FW_INF_DROP_NOTMEMBER``: Incremented when RX frame is dropped for port not being member of VLAN + - ``FW_RX_EOF_SHORT_FRMERR``: Incremented if End Of Frame (EOF) task is scheduled without seeing RX_B1 + - ``FW_RX_B0_DROP_EARLY_EOF``: Incremented when frame is dropped due to Early EOF + - ``FW_TX_JUMBO_FRM_CUTOFF``: Incremented when frame is cut off to prevent packet size > 2000 Bytes + - ``FW_RX_EXP_FRAG_Q_DROP``: Incremented when express frame is received in the same queue as the previous fragment + - ``FW_RX_FIFO_OVERRUN``: RX fifo overrun counter + - ``FW_CUT_THR_PKT``: Incremented when a packet is forwarded using Cut-Through forwarding method + - ``FW_HOST_RX_PKT_CNT``: Number of valid packets sent by Rx PRU to Host on PSI + - ``FW_HOST_TX_PKT_CNT``: Number of valid packets copied by RTU0 to Tx queues + - ``FW_HOST_EGRESS_Q_PRE_OVERFLOW``: Host Egress Q (Pre-emptible) Overflow Counter + - ``FW_HOST_EGRESS_Q_EXP_OVERFLOW``: Host Egress Q (Pre-emptible) Overflow Counter |