diff options
Diffstat (limited to 'Documentation/devicetree')
15 files changed, 614 insertions, 43 deletions
diff --git a/Documentation/devicetree/bindings/arm/arm,scmi.txt b/Documentation/devicetree/bindings/arm/arm,scmi.txt index dc102c4e4a78..1f293ea24cd8 100644 --- a/Documentation/devicetree/bindings/arm/arm,scmi.txt +++ b/Documentation/devicetree/bindings/arm/arm,scmi.txt @@ -14,7 +14,7 @@ Required properties: The scmi node with the following properties shall be under the /firmware/ node. -- compatible : shall be "arm,scmi" +- compatible : shall be "arm,scmi" or "arm,scmi-smc" for smc/hvc transports - mboxes: List of phandle and mailbox channel specifiers. It should contain exactly one or two mailboxes, one for transmitting messages("tx") and another optional for receiving the notifications("rx") if @@ -25,6 +25,7 @@ The scmi node with the following properties shall be under the /firmware/ node. protocol identifier for a given sub-node. - #size-cells : should be '0' as 'reg' property doesn't have any size associated with it. +- arm,smc-id : SMC id required when using smc or hvc transports Optional properties: diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt index 301eefbe1618..8d6a9d98e7a6 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt @@ -1,7 +1,8 @@ Mediatek mmsys controller ============================ -The Mediatek mmsys controller provides various clocks to the system. +The Mediatek mmsys system controller provides clock control, routing control, +and miscellaneous control in mmsys partition. Required Properties: @@ -15,13 +16,13 @@ Required Properties: - "mediatek,mt8183-mmsys", "syscon" - #clock-cells: Must be 1 -The mmsys controller uses the common clk binding from +For the clock control, the mmsys controller uses the common clk binding from Documentation/devicetree/bindings/clock/clock-bindings.txt The available clocks are defined in dt-bindings/clock/mt*-clk.h. Example: -mmsys: clock-controller@14000000 { +mmsys: syscon@14000000 { compatible = "mediatek,mt8173-mmsys", "syscon"; reg = <0 0x14000000 0 0x1000>; #clock-cells = <1>; diff --git a/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml b/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml new file mode 100644 index 000000000000..d6a3b71ea835 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/baikal,bt1-apb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Baikal-T1 APB-bus + +maintainers: + - Serge Semin <fancer.lancer@gmail.com> + +description: | + Baikal-T1 CPU or DMAC MMIO requests are handled by the AMBA 3 AXI Interconnect + which routes them to the AXI-APB bridge. This interface is a single master + multiple slaves bus in turn serializing IO accesses and routing them to the + addressed APB slave devices. In case of any APB protocol collisions, slave + device not responding on timeout an IRQ is raised with an erroneous address + reported to the APB terminator (APB Errors Handler Block). + +allOf: + - $ref: /schemas/simple-bus.yaml# + +properties: + compatible: + contains: + const: baikal,bt1-apb + + reg: + items: + - description: APB EHB MMIO registers + - description: APB MMIO region with no any device mapped + + reg-names: + items: + - const: ehb + - const: nodev + + interrupts: + maxItems: 1 + + clocks: + items: + - description: APB reference clock + + clock-names: + items: + - const: pclk + + resets: + items: + - description: APB domain reset line + + reset-names: + items: + - const: prst + +unevaluatedProperties: false + +required: + - compatible + - reg + - reg-names + - interrupts + - clocks + - clock-names + +examples: + - | + #include <dt-bindings/interrupt-controller/mips-gic.h> + + bus@1f059000 { + compatible = "baikal,bt1-apb", "simple-bus"; + reg = <0 0x1f059000 0 0x1000>, + <0 0x1d000000 0 0x2040000>; + reg-names = "ehb", "nodev"; + #address-cells = <1>; + #size-cells = <1>; + + ranges; + + interrupts = <GIC_SHARED 16 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&ccu_sys 1>; + clock-names = "pclk"; + + resets = <&ccu_sys 1>; + reset-names = "prst"; + }; +... diff --git a/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml b/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml new file mode 100644 index 000000000000..203bc0e5346b --- /dev/null +++ b/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml @@ -0,0 +1,107 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/baikal,bt1-axi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Baikal-T1 AXI-bus + +maintainers: + - Serge Semin <fancer.lancer@gmail.com> + +description: | + AXI3-bus is the main communication bus of Baikal-T1 SoC connecting all + high-speed peripheral IP-cores with RAM controller and with MIPS P5600 + cores. Traffic arbitration is done by means of DW AXI Interconnect (so + called AXI Main Interconnect) routing IO requests from one block to + another: from CPU to SoC peripherals and between some SoC peripherals + (mostly between peripheral devices and RAM, but also between DMA and + some peripherals). In case of any protocol error, device not responding + an IRQ is raised and a faulty situation is reported to the AXI EHB + (Errors Handler Block) embedded on top of the DW AXI Interconnect and + accessible by means of the Baikal-T1 System Controller. + +allOf: + - $ref: /schemas/simple-bus.yaml# + +properties: + compatible: + contains: + const: baikal,bt1-axi + + reg: + minItems: 1 + items: + - description: Synopsys DesignWare AXI Interconnect QoS registers + - description: AXI EHB MMIO system controller registers + + reg-names: + minItems: 1 + items: + - const: qos + - const: ehb + + '#interconnect-cells': + const: 1 + + syscon: + $ref: /schemas/types.yaml#definitions/phandle + description: Phandle to the Baikal-T1 System Controller DT node + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Main Interconnect uplink reference clock + + clock-names: + items: + - const: aclk + + resets: + items: + - description: Main Interconnect reset line + + reset-names: + items: + - const: arst + +unevaluatedProperties: false + +required: + - compatible + - reg + - reg-names + - syscon + - interrupts + - clocks + - clock-names + +examples: + - | + #include <dt-bindings/interrupt-controller/mips-gic.h> + + bus@1f05a000 { + compatible = "baikal,bt1-axi", "simple-bus"; + reg = <0 0x1f05a000 0 0x1000>, + <0 0x1f04d110 0 0x8>; + reg-names = "qos", "ehb"; + #address-cells = <1>; + #size-cells = <1>; + #interconnect-cells = <1>; + + syscon = <&syscon>; + + ranges; + + interrupts = <GIC_SHARED 127 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&ccu_axi 0>; + clock-names = "aclk"; + + resets = <&ccu_axi 0>; + reset-names = "arst"; + }; +... diff --git a/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt new file mode 100644 index 000000000000..daeca6ae6b76 --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt @@ -0,0 +1,56 @@ +Binding for NVIDIA Tegra20 CPUFreq +================================== + +Required properties: +- clocks: Must contain an entry for the CPU clock. + See ../clocks/clock-bindings.txt for details. +- operating-points-v2: See ../bindings/opp/opp.txt for details. +- #cooling-cells: Should be 2. See ../thermal/thermal.txt for details. + +For each opp entry in 'operating-points-v2' table: +- opp-supported-hw: Two bitfields indicating: + On Tegra20: + 1. CPU process ID mask + 2. SoC speedo ID mask + + On Tegra30: + 1. CPU process ID mask + 2. CPU speedo ID mask + + A bitwise AND is performed against these values and if any bit + matches, the OPP gets enabled. + +- opp-microvolt: CPU voltage triplet. + +Optional properties: +- cpu-supply: Phandle to the CPU power supply. + +Example: + regulators { + cpu_reg: regulator0 { + regulator-name = "vdd_cpu"; + }; + }; + + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + + opp@456000000 { + clock-latency-ns = <125000>; + opp-microvolt = <825000 825000 1125000>; + opp-supported-hw = <0x03 0x0001>; + opp-hz = /bits/ 64 <456000000>; + }; + + ... + }; + + cpus { + cpu@0 { + compatible = "arm,cortex-a9"; + clocks = <&tegra_car TEGRA20_CLK_CCLK>; + operating-points-v2 = <&cpu0_opp_table>; + cpu-supply = <&cpu_reg>; + #cooling-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt index 9999255ac5b6..47319214b5f6 100644 --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt @@ -40,14 +40,30 @@ of the following host1x client modules: Required properties: - compatible: "nvidia,tegra<chip>-vi" - - reg: Physical base address and length of the controller's registers. + - reg: Physical base address and length of the controller registers. - interrupts: The interrupt outputs from the controller. - - clocks: Must contain one entry, for the module clock. + - clocks: clocks: Must contain one entry, for the module clock. See ../clocks/clock-bindings.txt for details. - - resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. - - reset-names: Must include the following entries: - - vi + - Tegra20/Tegra30/Tegra114/Tegra124: + - resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names: Must include the following entries: + - vi + - Tegra210: + - power-domains: Must include venc powergate node as vi is in VE partition. + - Tegra210 has CSI part of VI sharing same host interface and register space. + So, VI device node should have CSI child node. + + - csi: mipi csi interface to vi + + Required properties: + - compatible: "nvidia,tegra210-csi" + - reg: Physical base address offset to parent and length of the controller + registers. + - clocks: Must contain entries csi, cilab, cilcd, cile, csi_tpg clocks. + See ../clocks/clock-bindings.txt for details. + - power-domains: Must include sor powergate node as csicil is in + SOR partition. - epp: encoder pre-processor @@ -309,13 +325,44 @@ Example: reset-names = "mpe"; }; - vi { - compatible = "nvidia,tegra20-vi"; - reg = <0x54080000 0x00040000>; - interrupts = <0 69 0x04>; - clocks = <&tegra_car TEGRA20_CLK_VI>; - resets = <&tegra_car 100>; - reset-names = "vi"; + vi@54080000 { + compatible = "nvidia,tegra210-vi"; + reg = <0x0 0x54080000 0x0 0x700>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + assigned-clocks = <&tegra_car TEGRA210_CLK_VI>; + assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>; + + clocks = <&tegra_car TEGRA210_CLK_VI>; + power-domains = <&pd_venc>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x0 0x0 0x54080000 0x2000>; + + csi@838 { + compatible = "nvidia,tegra210-csi"; + reg = <0x838 0x1300>; + assigned-clocks = <&tegra_car TEGRA210_CLK_CILAB>, + <&tegra_car TEGRA210_CLK_CILCD>, + <&tegra_car TEGRA210_CLK_CILE>, + <&tegra_car TEGRA210_CLK_CSI_TPG>; + assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_P>, + <&tegra_car TEGRA210_CLK_PLL_P>, + <&tegra_car TEGRA210_CLK_PLL_P>; + assigned-clock-rates = <102000000>, + <102000000>, + <102000000>, + <972000000>; + + clocks = <&tegra_car TEGRA210_CLK_CSI>, + <&tegra_car TEGRA210_CLK_CILAB>, + <&tegra_car TEGRA210_CLK_CILCD>, + <&tegra_car TEGRA210_CLK_CILE>, + <&tegra_car TEGRA210_CLK_CSI_TPG>; + clock-names = "csi", "cilab", "cilcd", "cile", "csi_tpg"; + power-domains = <&pd_sor>; + }; }; epp { diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt index f64064f8bdc2..18c0de362451 100644 --- a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt +++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt @@ -35,6 +35,12 @@ Required properties: Due to above changes, Tegra114 I2C driver makes incompatible with previous hardware driver. Hence, tegra114 I2C controller is compatible with "nvidia,tegra114-i2c". + nvidia,tegra210-i2c-vi: Tegra210 has one I2C controller that is part of the + host1x domain and typically used for camera use-cases. This VI I2C + controller is mostly compatible with the programming model of the + regular I2C controllers with a few exceptions. The I2C registers start + at an offset of 0xc00 (instead of 0), registers are 16 bytes apart + (rather than 4) and the controller does not support slave mode. - reg: Should contain I2C controller registers physical address and length. - interrupts: Should contain I2C controller interrupts. - address-cells: Address cells for I2C device address. diff --git a/Documentation/devicetree/bindings/memory-controllers/baikal,bt1-l2-ctl.yaml b/Documentation/devicetree/bindings/memory-controllers/baikal,bt1-l2-ctl.yaml new file mode 100644 index 000000000000..1fca282f64a2 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/baikal,bt1-l2-ctl.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/baikal,bt1-l2-ctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Baikal-T1 L2-cache Control Block + +maintainers: + - Serge Semin <fancer.lancer@gmail.com> + +description: | + By means of the System Controller Baikal-T1 SoC exposes a few settings to + tune the MIPS P5600 CM2 L2 cache performance up. In particular it's possible + to change the Tag, Data and Way-select RAM access latencies. Baikal-T1 + L2-cache controller block is responsible for the tuning. Its DT node is + supposed to be a child of the system controller. + +properties: + compatible: + const: baikal,bt1-l2-ctl + + reg: + maxItems: 1 + + baikal,l2-ws-latency: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Cycles of latency for Way-select RAM accesses + default: 0 + minimum: 0 + maximum: 3 + + baikal,l2-tag-latency: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Cycles of latency for Tag RAM accesses + default: 0 + minimum: 0 + maximum: 3 + + baikal,l2-data-latency: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Cycles of latency for Data RAM accesses + default: 1 + minimum: 0 + maximum: 3 + +additionalProperties: false + +required: + - compatible + +examples: + - | + l2@1f04d028 { + compatible = "baikal,bt1-l2-ctl"; + reg = <0x1f04d028 0x004>; + + baikal,l2-ws-latency = <1>; + baikal,l2-tag-latency = <1>; + baikal,l2-data-latency = <2>; + }; +... diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml new file mode 100644 index 000000000000..49ab09252e52 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/nvidia,tegra210-emc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra210 SoC External Memory Controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +description: | + The EMC interfaces with the off-chip SDRAM to service the request stream + sent from the memory controller. + +properties: + compatible: + const: nvidia,tegra210-emc + + reg: + maxItems: 3 + + clocks: + items: + - description: external memory clock + + clock-names: + items: + - const: emc + + interrupts: + items: + - description: EMC general interrupt + + memory-region: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to a reserved memory region describing the table of EMC + frequencies trained by the firmware + + nvidia,memory-controller: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle of the memory controller node + +required: + - compatible + - reg + - clocks + - clock-names + - nvidia,memory-controller + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/tegra210-car.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + emc_table: emc-table@83400000 { + compatible = "nvidia,tegra210-emc-table"; + reg = <0x83400000 0x10000>; + }; + }; + + external-memory-controller@7001b000 { + compatible = "nvidia,tegra210-emc"; + reg = <0x7001b000 0x1000>, + <0x7001e000 0x1000>, + <0x7001f000 0x1000>; + clocks = <&tegra_car TEGRA210_CLK_EMC>; + clock-names = "emc"; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + memory-region = <&emc_table>; + nvidia,memory-controller = <&mc>; + }; diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml index 6c6079fe1351..51a6fac892e3 100644 --- a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml +++ b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml @@ -23,33 +23,31 @@ description: |+ properties: compatible: enum: + - amlogic,meson8-pwrc + - amlogic,meson8b-pwrc + - amlogic,meson8m2-pwrc + - amlogic,meson-gxbb-pwrc - amlogic,meson-g12a-pwrc - amlogic,meson-sm1-pwrc clocks: - minItems: 2 + minItems: 1 + maxItems: 2 clock-names: + minItems: 1 + maxItems: 2 items: - const: vpu - const: vapb resets: minItems: 11 + maxItems: 12 reset-names: - items: - - const: viu - - const: venc - - const: vcbus - - const: bt656 - - const: rdma - - const: venci - - const: vencp - - const: vdac - - const: vdi6 - - const: vencl - - const: vid_lock + minItems: 11 + maxItems: 12 "#power-domain-cells": const: 1 @@ -59,12 +57,86 @@ properties: allOf: - $ref: /schemas/types.yaml#/definitions/phandle +allOf: + - if: + properties: + compatible: + enum: + - amlogic,meson8b-pwrc + - amlogic,meson8m2-pwrc + then: + properties: + reset-names: + items: + - const: dblk + - const: pic_dc + - const: hdmi_apb + - const: hdmi_system + - const: venci + - const: vencp + - const: vdac + - const: vencl + - const: viu + - const: venc + - const: rdma + required: + - resets + - reset-names + + - if: + properties: + compatible: + enum: + - amlogic,meson-gxbb-pwrc + then: + properties: + reset-names: + items: + - const: viu + - const: venc + - const: vcbus + - const: bt656 + - const: dvin + - const: rdma + - const: venci + - const: vencp + - const: vdac + - const: vdi6 + - const: vencl + - const: vid_lock + required: + - resets + - reset-names + + - if: + properties: + compatible: + enum: + - amlogic,meson-g12a-pwrc + - amlogic,meson-sm1-pwrc + then: + properties: + reset-names: + items: + - const: viu + - const: venc + - const: vcbus + - const: bt656 + - const: rdma + - const: venci + - const: vencp + - const: vdac + - const: vdi6 + - const: vencl + - const: vid_lock + required: + - resets + - reset-names + required: - compatible - clocks - clock-names - - resets - - reset-names - "#power-domain-cells" - amlogic,ao-sysctrl diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml index ba605310abeb..8058955fb3b9 100644 --- a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml +++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml @@ -23,6 +23,7 @@ properties: - qcom,sc7180-rpmhpd - qcom,sdm845-rpmhpd - qcom,sm8150-rpmhpd + - qcom,sm8250-rpmhpd '#power-domain-cells': const: 1 diff --git a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt index c2489e41a801..e10502d9153e 100644 --- a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt +++ b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt @@ -9,6 +9,8 @@ Required properties: - For i.MX7 SoCs should be "fsl,imx7d-src", "syscon" - For i.MX8MQ SoCs should be "fsl,imx8mq-src", "syscon" - For i.MX8MM SoCs should be "fsl,imx8mm-src", "fsl,imx8mq-src", "syscon" + - For i.MX8MN SoCs should be "fsl,imx8mn-src", "fsl,imx8mq-src", "syscon" + - For i.MX8MP SoCs should be "fsl,imx8mp-src", "syscon" - reg: should be register base and length as documented in the datasheet - interrupts: Should contain SRC interrupt @@ -49,4 +51,6 @@ Example: For list of all valid reset indices see <dt-bindings/reset/imx7-reset.h> for i.MX7, <dt-bindings/reset/imx8mq-reset.h> for i.MX8MQ and -<dt-bindings/reset/imx8mq-reset.h> for i.MX8MM +<dt-bindings/reset/imx8mq-reset.h> for i.MX8MM and +<dt-bindings/reset/imx8mq-reset.h> for i.MX8MN and +<dt-bindings/reset/imx8mp-reset.h> for i.MX8MP diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt index 4fc571e78f01..953add19e937 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt @@ -19,6 +19,7 @@ power-domains. "qcom,sc7180-aoss-qmp" "qcom,sdm845-aoss-qmp" "qcom,sm8150-aoss-qmp" + "qcom,sm8250-aoss-qmp" - reg: Usage: required diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt index f8fa71f5d84b..2e2f6dc351c0 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt @@ -65,30 +65,30 @@ which uses apr as communication between Apps and QDSP. compatible = "qcom,apr-v2"; qcom,apr-domain = <APR_DOMAIN_ADSP>; - q6core@3 { + apr-service@3 { compatible = "qcom,q6core"; reg = <APR_SVC_ADSP_CORE>; }; - q6afe@4 { + apr-service@4 { compatible = "qcom,q6afe"; reg = <APR_SVC_AFE>; dais { #sound-dai-cells = <1>; - hdmi@1 { - reg = <1>; + dai@1 { + reg = <HDMI_RX>; }; }; }; - q6asm@7 { + apr-service@7 { compatible = "qcom,q6asm"; reg = <APR_SVC_ASM>; ... }; - q6adm@8 { + apr-service@8 { compatible = "qcom,q6adm"; reg = <APR_SVC_ADM>; ... @@ -106,26 +106,26 @@ have no such dependency. qcom,glink-channels = "apr_audio_svc"; qcom,apr-domain = <APR_DOMAIN_ADSP>; - q6core { + apr-service@3 { compatible = "qcom,q6core"; reg = <APR_SVC_ADSP_CORE>; }; - q6afe: q6afe { + q6afe: apr-service@4 { compatible = "qcom,q6afe"; reg = <APR_SVC_AFE>; qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; ... }; - q6asm: q6asm { + q6asm: apr-service@7 { compatible = "qcom,q6asm"; reg = <APR_SVC_ASM>; qcom,protection-domain = "tms/servreg", "msm/slpi/sensor_pd"; ... }; - q6adm: q6adm { + q6adm: apr-service@8 { compatible = "qcom,q6adm"; reg = <APR_SVC_ADM>; qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; diff --git a/Documentation/devicetree/bindings/soc/ti/k3-socinfo.yaml b/Documentation/devicetree/bindings/soc/ti/k3-socinfo.yaml new file mode 100644 index 000000000000..a1a8423b2e2e --- /dev/null +++ b/Documentation/devicetree/bindings/soc/ti/k3-socinfo.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/ti/k3-socinfo.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments K3 Multicore SoC platforms chipid module + +maintainers: + - Tero Kristo <t-kristo@ti.com> + - Nishanth Menon <nm@ti.com> + +description: | + Texas Instruments (ARM64) K3 Multicore SoC platforms chipid module is + represented by CTRLMMR_xxx_JTAGID register which contains information about + SoC id and revision. + +properties: + $nodename: + pattern: "^chipid@[0-9a-f]+$" + + compatible: + items: + - const: ti,am654-chipid + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + chipid@43000014 { + compatible = "ti,am654-chipid"; + reg = <0x43000014 0x4>; + }; |