diff options
Diffstat (limited to 'Documentation/devicetree')
10 files changed, 147 insertions, 44 deletions
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt index c149fadc6f47..70c1a624486d 100644 --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt @@ -157,6 +157,15 @@ Required properties: Optional properties: - timeout-sec: contains the watchdog timeout in seconds. +SCU key bindings based on SCU Message Protocol +------------------------------------------------------------ + +Required properties: +- compatible: should be: + "fsl,imx8qxp-sc-key" + followed by "fsl,imx-sc-key"; +- linux,keycodes: See Documentation/devicetree/bindings/input/keys.txt + Example (imx8qxp): ------------- aliases { @@ -220,6 +229,11 @@ firmware { compatible = "fsl,imx8qxp-sc-rtc"; }; + scu_key: scu-key { + compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key"; + linux,keycodes = <KEY_POWER>; + }; + watchdog { compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt"; timeout-sec = <60>; diff --git a/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml b/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml new file mode 100644 index 000000000000..5b37be0be4e9 --- /dev/null +++ b/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/fsl,mpr121-touchkey.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale MPR121 capacitive touch sensor controller + +maintainers: + - Dmitry Torokhov <dmitry.torokhov@gmail.com> + +description: | + The MPR121 supports up to 12 completely independent electrodes/capacitance + sensing inputs in which 8 are multifunctional for LED driving and GPIO. + https://www.nxp.com/docs/en/data-sheet/MPR121.pdf + +allOf: + - $ref: input.yaml# + +anyOf: + - required: [ interrupts ] + - required: [ poll-interval ] + +properties: + compatible: + const: fsl,mpr121-touchkey + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: + maxItems: 1 + + linux,keycodes: + minItems: 1 + maxItems: 12 + + wakeup-source: + description: Use any event on keypad as wakeup event. + type: boolean + +required: + - compatible + - reg + - vdd-supply + - linux,keycodes + +examples: + - | + // Example with interrupts + #include "dt-bindings/input/input.h" + i2c { + #address-cells = <1>; + #size-cells = <0>; + + mpr121@5a { + compatible = "fsl,mpr121-touchkey"; + reg = <0x5a>; + interrupt-parent = <&gpio1>; + interrupts = <28 2>; + autorepeat; + vdd-supply = <&ldo4_reg>; + linux,keycodes = <KEY_0>, <KEY_1>, <KEY_2>, <KEY_3>, + <KEY_4>, <KEY_5>, <KEY_6>, <KEY_7>, + <KEY_8>, <KEY_9>, <KEY_A>, <KEY_B>; + }; + }; + + - | + // Example with polling + #include "dt-bindings/input/input.h" + i2c { + #address-cells = <1>; + #size-cells = <0>; + + mpr121@5a { + compatible = "fsl,mpr121-touchkey"; + reg = <0x5a>; + poll-interval = <20>; + autorepeat; + vdd-supply = <&ldo4_reg>; + linux,keycodes = <KEY_0>, <KEY_1>, <KEY_2>, <KEY_3>, + <KEY_4>, <KEY_5>, <KEY_6>, <KEY_7>, + <KEY_8>, <KEY_9>, <KEY_A>, <KEY_B>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt b/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt index b2a76301e632..dc194b2c151a 100644 --- a/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt +++ b/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt @@ -1,8 +1,9 @@ -Ilitek ILI210x/ILI251x touchscreen controller +Ilitek ILI210x/ILI2117/ILI251x touchscreen controller Required properties: - compatible: ilitek,ili210x for ILI210x + ilitek,ili2117 for ILI2117 ilitek,ili251x for ILI251x - reg: The I2C address of the device diff --git a/Documentation/devicetree/bindings/input/input.yaml b/Documentation/devicetree/bindings/input/input.yaml new file mode 100644 index 000000000000..6d519046b3af --- /dev/null +++ b/Documentation/devicetree/bindings/input/input.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/input.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common input schema binding + +maintainers: + - Dmitry Torokhov <dmitry.torokhov@gmail.com> + +properties: + autorepeat: + description: Enable autorepeat when key is pressed and held down. + type: boolean + + linux,keycodes: + description: + Specifies an array of numeric keycode values to be used for reporting + button presses. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - items: + minimum: 0 + maximum: 0xff + + poll-interval: + description: Poll interval time in milliseconds. + $ref: /schemas/types.yaml#/definitions/uint32 + + power-off-time-sec: + description: + Duration in seconds which the key should be kept pressed for device to + power off automatically. Device with key pressed shutdown feature can + specify this property. + $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/input/keys.txt b/Documentation/devicetree/bindings/input/keys.txt deleted file mode 100644 index f5a5ddde53f1..000000000000 --- a/Documentation/devicetree/bindings/input/keys.txt +++ /dev/null @@ -1,8 +0,0 @@ -General Keys Properties: - -Optional properties for Keys: -- power-off-time-sec: Duration in seconds which the key should be kept - pressed for device to power off automatically. Device with key pressed - shutdown feature can specify this property. -- linux,keycodes: Specifies the numeric keycode values to be used for - reporting key presses. diff --git a/Documentation/devicetree/bindings/input/mpr121-touchkey.txt b/Documentation/devicetree/bindings/input/mpr121-touchkey.txt deleted file mode 100644 index b7c61ee5841b..000000000000 --- a/Documentation/devicetree/bindings/input/mpr121-touchkey.txt +++ /dev/null @@ -1,30 +0,0 @@ -* Freescale MPR121 Controllor - -Required Properties: -- compatible: Should be "fsl,mpr121-touchkey" -- reg: The I2C slave address of the device. -- interrupts: The interrupt number to the cpu. -- vdd-supply: Phandle to the Vdd power supply. -- linux,keycodes: Specifies an array of numeric keycode values to - be used for reporting button presses. The array can - contain up to 12 entries. - -Optional Properties: -- wakeup-source: Use any event on keypad as wakeup event. -- autorepeat: Enable autorepeat feature. - -Example: - -#include "dt-bindings/input/input.h" - - touchkey: mpr121@5a { - compatible = "fsl,mpr121-touchkey"; - reg = <0x5a>; - interrupt-parent = <&gpio1>; - interrupts = <28 2>; - autorepeat; - vdd-supply = <&ldo4_reg>; - linux,keycodes = <KEY_0>, <KEY_1>, <KEY_2>, <KEY_3>, - <KEY_4> <KEY_5>, <KEY_6>, <KEY_7>, - <KEY_8>, <KEY_9>, <KEY_A>, <KEY_B>; - }; diff --git a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt index 2888d07c2ef0..535d92885372 100644 --- a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt +++ b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt @@ -10,13 +10,13 @@ Documentation/devicetree/bindings/mfd/mt6397.txt Required properties: - compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys" -- linux,keycodes: See Documentation/devicetree/bindings/input/keys.txt +- linux,keycodes: See Documentation/devicetree/bindings/input/input.yaml Optional Properties: - wakeup-source: See Documentation/devicetree/bindings/power/wakeup-source.txt - mediatek,long-press-mode: Long press key shutdown setting, 1 for pwrkey only, 2 for pwrkey/homekey together, others for disabled. -- power-off-time-sec: See Documentation/devicetree/bindings/input/keys.txt +- power-off-time-sec: See Documentation/devicetree/bindings/input/input.yaml Example: diff --git a/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt b/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt index 4494613ae7ad..eb8e83736c02 100644 --- a/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt +++ b/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt @@ -15,7 +15,7 @@ Optional properties: - st,onkey-pu-inactive: onkey pull up is not active - power-off-time-sec: Duration in seconds which the key should be kept pressed for device to power off automatically (from 1 to 16 seconds). - see See Documentation/devicetree/bindings/input/keys.txt + see See Documentation/devicetree/bindings/input/input.yaml Example: diff --git a/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt b/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt index cdd743a1f2d5..afa38dc069f0 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt @@ -38,7 +38,7 @@ Optional properties: Example: - ad7879@2c { + touchscreen0@2c { compatible = "adi,ad7879-1"; reg = <0x2c>; interrupt-parent = <&gpio1>; @@ -52,7 +52,7 @@ Example: adi,conversion-interval = /bits/ 8 <255>; }; - ad7879@1 { + touchscreen1@1 { compatible = "adi,ad7879"; spi-max-frequency = <5000000>; reg = <1>; diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt index 870b8c5cce9b..0f6950073d6f 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt @@ -30,6 +30,7 @@ Required properties: Optional properties: - reset-gpios: GPIO specification for the RESET input - wake-gpios: GPIO specification for the WAKE input + - vcc-supply: Regulator that supplies the touchscreen - pinctrl-names: should be "default" - pinctrl-0: a phandle pointing to the pin settings for the |