diff options
Diffstat (limited to 'Documentation/devicetree')
| -rw-r--r-- | Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt | 212 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/memory-controllers/rockchip,rk3399-dmc.yaml | 384 |
2 files changed, 384 insertions, 212 deletions
diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt deleted file mode 100644 index 58fc8a6cebc7..000000000000 --- a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt +++ /dev/null @@ -1,212 +0,0 @@ -* Rockchip rk3399 DMC (Dynamic Memory Controller) device - -Required properties: -- compatible: Must be "rockchip,rk3399-dmc". -- devfreq-events: Node to get DDR loading, Refer to - Documentation/devicetree/bindings/devfreq/event/ - rockchip-dfi.txt -- clocks: Phandles for clock specified in "clock-names" property -- clock-names : The name of clock used by the DFI, must be - "pclk_ddr_mon"; -- operating-points-v2: Refer to Documentation/devicetree/bindings/opp/opp-v2.yaml - for details. -- center-supply: DMC supply node. -- status: Marks the node enabled/disabled. -- rockchip,pmu: Phandle to the syscon managing the "PMU general register - files". - -Optional properties: -- interrupts: The CPU interrupt number. The interrupt specifier - format depends on the interrupt controller. - It should be a DCF interrupt. When DDR DVFS finishes - a DCF interrupt is triggered. -- rockchip,pmu: Phandle to the syscon managing the "PMU general register - files". - -Following properties relate to DDR timing: - -- rockchip,dram_speed_bin : Value reference include/dt-bindings/clock/rk3399-ddr.h, - it selects the DDR3 cl-trp-trcd type. It must be - set according to "Speed Bin" in DDR3 datasheet, - DO NOT use a smaller "Speed Bin" than specified - for the DDR3 being used. - -- rockchip,pd_idle : Configure the PD_IDLE value. Defines the - power-down idle period in which memories are - placed into power-down mode if bus is idle - for PD_IDLE DFI clock cycles. - -- rockchip,sr_idle : Configure the SR_IDLE value. Defines the - self-refresh idle period in which memories are - placed into self-refresh mode if bus is idle - for SR_IDLE * 1024 DFI clock cycles (DFI - clocks freq is half of DRAM clock), default - value is "0". - -- rockchip,sr_mc_gate_idle : Defines the memory self-refresh and controller - clock gating idle period. Memories are placed - into self-refresh mode and memory controller - clock arg gating started if bus is idle for - sr_mc_gate_idle*1024 DFI clock cycles. - -- rockchip,srpd_lite_idle : Defines the self-refresh power down idle - period in which memories are placed into - self-refresh power down mode if bus is idle - for srpd_lite_idle * 1024 DFI clock cycles. - This parameter is for LPDDR4 only. - -- rockchip,standby_idle : Defines the standby idle period in which - memories are placed into self-refresh mode. - The controller, pi, PHY and DRAM clock will - be gated if bus is idle for standby_idle * DFI - clock cycles. - -- rockchip,dram_dll_dis_freq : Defines the DDR3 DLL bypass frequency in MHz. - When DDR frequency is less than DRAM_DLL_DISB_FREQ, - DDR3 DLL will be bypassed. Note: if DLL was bypassed, - the odt will also stop working. - -- rockchip,phy_dll_dis_freq : Defines the PHY dll bypass frequency in - MHz (Mega Hz). When DDR frequency is less than - DRAM_DLL_DISB_FREQ, PHY DLL will be bypassed. - Note: PHY DLL and PHY ODT are independent. - -- rockchip,ddr3_odt_dis_freq : When the DRAM type is DDR3, this parameter defines - the ODT disable frequency in MHz (Mega Hz). - when the DDR frequency is less then ddr3_odt_dis_freq, - the ODT on the DRAM side and controller side are - both disabled. - -- rockchip,ddr3_drv : When the DRAM type is DDR3, this parameter defines - the DRAM side driver strength in ohms. Default - value is 40. - -- rockchip,ddr3_odt : When the DRAM type is DDR3, this parameter defines - the DRAM side ODT strength in ohms. Default value - is 120. - -- rockchip,phy_ddr3_ca_drv : When the DRAM type is DDR3, this parameter defines - the phy side CA line (incluing command line, - address line and clock line) driver strength. - Default value is 40. - -- rockchip,phy_ddr3_dq_drv : When the DRAM type is DDR3, this parameter defines - the PHY side DQ line (including DQS/DQ/DM line) - driver strength. Default value is 40. - -- rockchip,phy_ddr3_odt : When the DRAM type is DDR3, this parameter defines - the PHY side ODT strength. Default value is 240. - -- rockchip,lpddr3_odt_dis_freq : When the DRAM type is LPDDR3, this parameter defines - then ODT disable frequency in MHz (Mega Hz). - When DDR frequency is less then ddr3_odt_dis_freq, - the ODT on the DRAM side and controller side are - both disabled. - -- rockchip,lpddr3_drv : When the DRAM type is LPDDR3, this parameter defines - the DRAM side driver strength in ohms. Default - value is 34. - -- rockchip,lpddr3_odt : When the DRAM type is LPDDR3, this parameter defines - the DRAM side ODT strength in ohms. Default value - is 240. - -- rockchip,phy_lpddr3_ca_drv : When the DRAM type is LPDDR3, this parameter defines - the PHY side CA line (including command line, - address line and clock line) driver strength. - Default value is 40. - -- rockchip,phy_lpddr3_dq_drv : When the DRAM type is LPDDR3, this parameter defines - the PHY side DQ line (including DQS/DQ/DM line) - driver strength. Default value is 40. - -- rockchip,phy_lpddr3_odt : When dram type is LPDDR3, this parameter define - the phy side odt strength, default value is 240. - -- rockchip,lpddr4_odt_dis_freq : When the DRAM type is LPDDR4, this parameter - defines the ODT disable frequency in - MHz (Mega Hz). When the DDR frequency is less then - ddr3_odt_dis_freq, the ODT on the DRAM side and - controller side are both disabled. - -- rockchip,lpddr4_drv : When the DRAM type is LPDDR4, this parameter defines - the DRAM side driver strength in ohms. Default - value is 60. - -- rockchip,lpddr4_dq_odt : When the DRAM type is LPDDR4, this parameter defines - the DRAM side ODT on DQS/DQ line strength in ohms. - Default value is 40. - -- rockchip,lpddr4_ca_odt : When the DRAM type is LPDDR4, this parameter defines - the DRAM side ODT on CA line strength in ohms. - Default value is 40. - -- rockchip,phy_lpddr4_ca_drv : When the DRAM type is LPDDR4, this parameter defines - the PHY side CA line (including command address - line) driver strength. Default value is 40. - -- rockchip,phy_lpddr4_ck_cs_drv : When the DRAM type is LPDDR4, this parameter defines - the PHY side clock line and CS line driver - strength. Default value is 80. - -- rockchip,phy_lpddr4_dq_drv : When the DRAM type is LPDDR4, this parameter defines - the PHY side DQ line (including DQS/DQ/DM line) - driver strength. Default value is 80. - -- rockchip,phy_lpddr4_odt : When the DRAM type is LPDDR4, this parameter defines - the PHY side ODT strength. Default value is 60. - -Example: - dmc_opp_table: dmc_opp_table { - compatible = "operating-points-v2"; - - opp00 { - opp-hz = /bits/ 64 <300000000>; - opp-microvolt = <900000>; - }; - opp01 { - opp-hz = /bits/ 64 <666000000>; - opp-microvolt = <900000>; - }; - }; - - dmc: dmc { - compatible = "rockchip,rk3399-dmc"; - devfreq-events = <&dfi>; - interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_DDRC>; - clock-names = "dmc_clk"; - operating-points-v2 = <&dmc_opp_table>; - center-supply = <&ppvar_centerlogic>; - upthreshold = <15>; - downdifferential = <10>; - rockchip,ddr3_speed_bin = <21>; - rockchip,pd_idle = <0x40>; - rockchip,sr_idle = <0x2>; - rockchip,sr_mc_gate_idle = <0x3>; - rockchip,srpd_lite_idle = <0x4>; - rockchip,standby_idle = <0x2000>; - rockchip,dram_dll_dis_freq = <300>; - rockchip,phy_dll_dis_freq = <125>; - rockchip,auto_pd_dis_freq = <666>; - rockchip,ddr3_odt_dis_freq = <333>; - rockchip,ddr3_drv = <40>; - rockchip,ddr3_odt = <120>; - rockchip,phy_ddr3_ca_drv = <40>; - rockchip,phy_ddr3_dq_drv = <40>; - rockchip,phy_ddr3_odt = <240>; - rockchip,lpddr3_odt_dis_freq = <333>; - rockchip,lpddr3_drv = <34>; - rockchip,lpddr3_odt = <240>; - rockchip,phy_lpddr3_ca_drv = <40>; - rockchip,phy_lpddr3_dq_drv = <40>; - rockchip,phy_lpddr3_odt = <240>; - rockchip,lpddr4_odt_dis_freq = <333>; - rockchip,lpddr4_drv = <60>; - rockchip,lpddr4_dq_odt = <40>; - rockchip,lpddr4_ca_odt = <40>; - rockchip,phy_lpddr4_ca_drv = <40>; - rockchip,phy_lpddr4_ck_cs_drv = <80>; - rockchip,phy_lpddr4_dq_drv = <80>; - rockchip,phy_lpddr4_odt = <60>; - }; diff --git a/Documentation/devicetree/bindings/memory-controllers/rockchip,rk3399-dmc.yaml b/Documentation/devicetree/bindings/memory-controllers/rockchip,rk3399-dmc.yaml new file mode 100644 index 000000000000..fb4920397d08 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/rockchip,rk3399-dmc.yaml @@ -0,0 +1,384 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# %YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/rockchip,rk3399-dmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip rk3399 DMC (Dynamic Memory Controller) device + +maintainers: + - Brian Norris <briannorris@chromium.org> + +properties: + compatible: + enum: + - rockchip,rk3399-dmc + + devfreq-events: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Node to get DDR loading. Refer to + Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt. + + clocks: + maxItems: 1 + + clock-names: + items: + - const: dmc_clk + + operating-points-v2: true + + center-supply: + description: + DMC regulator supply. + + rockchip,pmu: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon managing the "PMU general register files". + + interrupts: + maxItems: 1 + description: + The CPU interrupt number. It should be a DCF interrupt. When DDR DVFS + finishes, a DCF interrupt is triggered. + + rockchip,ddr3_speed_bin: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + For values, reference include/dt-bindings/clock/rk3399-ddr.h. Selects the + DDR3 cl-trp-trcd type. It must be set according to "Speed Bin" in DDR3 + datasheet; DO NOT use a smaller "Speed Bin" than specified for the DDR3 + being used. + + rockchip,pd_idle: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Configure the PD_IDLE value. Defines the power-down idle period in which + memories are placed into power-down mode if bus is idle for PD_IDLE DFI + clock cycles. + See also rockchip,pd-idle-ns. + + rockchip,sr_idle: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Configure the SR_IDLE value. Defines the self-refresh idle period in + which memories are placed into self-refresh mode if bus is idle for + SR_IDLE * 1024 DFI clock cycles (DFI clocks freq is half of DRAM clock). + See also rockchip,sr-idle-ns. + default: 0 + + rockchip,sr_mc_gate_idle: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Defines the memory self-refresh and controller clock gating idle period. + Memories are placed into self-refresh mode and memory controller clock + arg gating started if bus is idle for sr_mc_gate_idle*1024 DFI clock + cycles. + See also rockchip,sr-mc-gate-idle-ns. + + rockchip,srpd_lite_idle: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Defines the self-refresh power down idle period in which memories are + placed into self-refresh power down mode if bus is idle for + srpd_lite_idle * 1024 DFI clock cycles. This parameter is for LPDDR4 + only. + See also rockchip,srpd-lite-idle-ns. + + rockchip,standby_idle: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Defines the standby idle period in which memories are placed into + self-refresh mode. The controller, pi, PHY and DRAM clock will be gated + if bus is idle for standby_idle * DFI clock cycles. + See also rockchip,standby-idle-ns. + + rockchip,dram_dll_dis_freq: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Defines the DDR3 DLL bypass frequency in MHz. When DDR frequency is less + than DRAM_DLL_DISB_FREQ, DDR3 DLL will be bypassed. + Note: if DLL was bypassed, the odt will also stop working. + + rockchip,phy_dll_dis_freq: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Defines the PHY dll bypass frequency in MHz (Mega Hz). When DDR frequency + is less than DRAM_DLL_DISB_FREQ, PHY DLL will be bypassed. + Note: PHY DLL and PHY ODT are independent. + + rockchip,auto_pd_dis_freq: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Defines the auto PD disable frequency in MHz. + + rockchip,ddr3_odt_dis_freq: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1000000 # In case anyone thought this was MHz. + description: + When the DRAM type is DDR3, this parameter defines the ODT disable + frequency in Hz. When the DDR frequency is less then ddr3_odt_dis_freq, + the ODT on the DRAM side and controller side are both disabled. + + rockchip,ddr3_drv: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is DDR3, this parameter defines the DRAM side drive + strength in ohms. + default: 40 + + rockchip,ddr3_odt: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is DDR3, this parameter defines the DRAM side ODT + strength in ohms. + default: 120 + + rockchip,phy_ddr3_ca_drv: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is DDR3, this parameter defines the phy side CA line + (incluing command line, address line and clock line) drive strength. + default: 40 + + rockchip,phy_ddr3_dq_drv: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is DDR3, this parameter defines the PHY side DQ line + (including DQS/DQ/DM line) drive strength. + default: 40 + + rockchip,phy_ddr3_odt: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is DDR3, this parameter defines the PHY side ODT + strength. + default: 240 + + rockchip,lpddr3_odt_dis_freq: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1000000 # In case anyone thought this was MHz. + description: + When the DRAM type is LPDDR3, this parameter defines then ODT disable + frequency in Hz. When DDR frequency is less then ddr3_odt_dis_freq, the + ODT on the DRAM side and controller side are both disabled. + + rockchip,lpddr3_drv: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is LPDDR3, this parameter defines the DRAM side drive + strength in ohms. + default: 34 + + rockchip,lpddr3_odt: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is LPDDR3, this parameter defines the DRAM side ODT + strength in ohms. + default: 240 + + rockchip,phy_lpddr3_ca_drv: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is LPDDR3, this parameter defines the PHY side CA line + (including command line, address line and clock line) drive strength. + default: 40 + + rockchip,phy_lpddr3_dq_drv: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is LPDDR3, this parameter defines the PHY side DQ line + (including DQS/DQ/DM line) drive strength. + default: 40 + + rockchip,phy_lpddr3_odt: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When dram type is LPDDR3, this parameter define the phy side odt + strength, default value is 240. + + rockchip,lpddr4_odt_dis_freq: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1000000 # In case anyone thought this was MHz. + description: + When the DRAM type is LPDDR4, this parameter defines the ODT disable + frequency in Hz. When the DDR frequency is less then ddr3_odt_dis_freq, + the ODT on the DRAM side and controller side are both disabled. + + rockchip,lpddr4_drv: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is LPDDR4, this parameter defines the DRAM side drive + strength in ohms. + default: 60 + + rockchip,lpddr4_dq_odt: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is LPDDR4, this parameter defines the DRAM side ODT on + DQS/DQ line strength in ohms. + default: 40 + + rockchip,lpddr4_ca_odt: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is LPDDR4, this parameter defines the DRAM side ODT on + CA line strength in ohms. + default: 40 + + rockchip,phy_lpddr4_ca_drv: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is LPDDR4, this parameter defines the PHY side CA line + (including command address line) drive strength. + default: 40 + + rockchip,phy_lpddr4_ck_cs_drv: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is LPDDR4, this parameter defines the PHY side clock + line and CS line drive strength. + default: 80 + + rockchip,phy_lpddr4_dq_drv: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is LPDDR4, this parameter defines the PHY side DQ line + (including DQS/DQ/DM line) drive strength. + default: 80 + + rockchip,phy_lpddr4_odt: + deprecated: true + $ref: /schemas/types.yaml#/definitions/uint32 + description: + When the DRAM type is LPDDR4, this parameter defines the PHY side ODT + strength. + default: 60 + + rockchip,pd-idle-ns: + description: + Configure the PD_IDLE value in nanoseconds. Defines the power-down idle + period in which memories are placed into power-down mode if bus is idle + for PD_IDLE nanoseconds. + + rockchip,sr-idle-ns: + description: + Configure the SR_IDLE value in nanoseconds. Defines the self-refresh idle + period in which memories are placed into self-refresh mode if bus is idle + for SR_IDLE nanoseconds. + default: 0 + + rockchip,sr-mc-gate-idle-ns: + description: + Defines the memory self-refresh and controller clock gating idle period in nanoseconds. + Memories are placed into self-refresh mode and memory controller clock + arg gating started if bus is idle for sr_mc_gate_idle nanoseconds. + + rockchip,srpd-lite-idle-ns: + description: + Defines the self-refresh power down idle period in which memories are + placed into self-refresh power down mode if bus is idle for + srpd_lite_idle nanoseonds. This parameter is for LPDDR4 only. + + rockchip,standby-idle-ns: + description: + Defines the standby idle period in which memories are placed into + self-refresh mode. The controller, pi, PHY and DRAM clock will be gated + if bus is idle for standby_idle nanoseconds. + + rockchip,pd-idle-dis-freq-hz: + description: + Defines the power-down idle disable frequency in Hz. When the DDR + frequency is greater than pd-idle-dis-freq, power-down idle is disabled. + See also rockchip,pd-idle-ns. + + rockchip,sr-idle-dis-freq-hz: + description: + Defines the self-refresh idle disable frequency in Hz. When the DDR + frequency is greater than sr-idle-dis-freq, self-refresh idle is + disabled. See also rockchip,sr-idle-ns. + + rockchip,sr-mc-gate-idle-dis-freq-hz: + description: + Defines the self-refresh and memory-controller clock gating disable + frequency in Hz. When the DDR frequency is greater than + sr-mc-gate-idle-dis-freq, the clock will not be gated when idle. See also + rockchip,sr-mc-gate-idle-ns. + + rockchip,srpd-lite-idle-dis-freq-hz: + description: + Defines the self-refresh power down idle disable frequency in Hz. When + the DDR frequency is greater than srpd-lite-idle-dis-freq, memory will + not be placed into self-refresh power down mode when idle. See also + rockchip,srpd-lite-idle-ns. + + rockchip,standby-idle-dis-freq-hz: + description: + Defines the standby idle disable frequency in Hz. When the DDR frequency + is greater than standby-idle-dis-freq, standby idle is disabled. See also + rockchip,standby-idle-ns. + +required: + - compatible + - devfreq-events + - clocks + - clock-names + - operating-points-v2 + - center-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3399-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + memory-controller { + compatible = "rockchip,rk3399-dmc"; + devfreq-events = <&dfi>; + rockchip,pmu = <&pmu>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_DDRC>; + clock-names = "dmc_clk"; + operating-points-v2 = <&dmc_opp_table>; + center-supply = <&ppvar_centerlogic>; + rockchip,pd-idle-ns = <160>; + rockchip,sr-idle-ns = <10240>; + rockchip,sr-mc-gate-idle-ns = <40960>; + rockchip,srpd-lite-idle-ns = <61440>; + rockchip,standby-idle-ns = <81920>; + rockchip,ddr3_odt_dis_freq = <333000000>; + rockchip,lpddr3_odt_dis_freq = <333000000>; + rockchip,lpddr4_odt_dis_freq = <333000000>; + rockchip,pd-idle-dis-freq-hz = <1000000000>; + rockchip,sr-idle-dis-freq-hz = <1000000000>; + rockchip,sr-mc-gate-idle-dis-freq-hz = <1000000000>; + rockchip,srpd-lite-idle-dis-freq-hz = <0>; + rockchip,standby-idle-dis-freq-hz = <928000000>; + }; |