diff options
Diffstat (limited to 'Documentation/devicetree/bindings/usb/usb251xb.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/usb/usb251xb.txt | 89 |
1 files changed, 0 insertions, 89 deletions
diff --git a/Documentation/devicetree/bindings/usb/usb251xb.txt b/Documentation/devicetree/bindings/usb/usb251xb.txt deleted file mode 100644 index 1a934eab175e..000000000000 --- a/Documentation/devicetree/bindings/usb/usb251xb.txt +++ /dev/null @@ -1,89 +0,0 @@ -Microchip USB 2.0 Hi-Speed Hub Controller - -The device node for the configuration of a Microchip USB251x/xBi USB 2.0 -Hi-Speed Controller. - -Required properties : - - compatible : Should be "microchip,usb251xb" or one of the specific types: - "microchip,usb2512b", "microchip,usb2512bi", "microchip,usb2513b", - "microchip,usb2513bi", "microchip,usb2514b", "microchip,usb2514bi", - "microchip,usb2517", "microchip,usb2517i", "microchip,usb2422" - - reg : I2C address on the selected bus (default is <0x2C>) - -Optional properties : - - reset-gpios : Should specify the gpio for hub reset - - vdd-supply : Should specify the phandle to the regulator supplying vdd - - skip-config : Skip Hub configuration, but only send the USB-Attach command - - vendor-id : Set USB Vendor ID of the hub (16 bit, default is 0x0424) - - product-id : Set USB Product ID of the hub (16 bit, default depends on type) - - device-id : Set USB Device ID of the hub (16 bit, default is 0x0bb3) - - language-id : Set USB Language ID (16 bit, default is 0x0000) - - manufacturer : Set USB Manufacturer string (max 31 characters long) - - product : Set USB Product string (max 31 characters long) - - serial : Set USB Serial string (max 31 characters long) - - {bus,self}-powered : selects between self- and bus-powered operation - (boolean, default is self-powered) - - disable-hi-speed : disable USB Hi-Speed support (boolean) - - {multi,single}-tt : selects between multi- and single-transaction-translator - (boolean, default is multi-tt) - - disable-eop : disable End of Packet generation in full-speed mode (boolean) - - {ganged,individual}-sensing : select over-current sense type in self-powered - mode (boolean, default is individual) - - {ganged,individual}-port-switching : select port power switching mode - (boolean, default is individual) - - dynamic-power-switching : enable auto-switching from self- to bus-powered - operation if the local power source is removed or unavailable (boolean) - - oc-delay-us : Delay time (in microseconds) for filtering the over-current - sense inputs. Valid values are 100, 4000, 8000 (default) and 16000. If - an invalid value is given, the default is used instead. - - compound-device : indicate the hub is part of a compound device (boolean) - - port-mapping-mode : enable port mapping mode (boolean) - - led-{usb,speed}-mode : led usb/speed indication mode selection - (boolean, default is speed mode) - - string-support : enable string descriptor support (required for manufacturer, - product and serial string configuration) - - non-removable-ports : Should specify the ports which have a non-removable - device connected. - - sp-disabled-ports : Specifies the ports which will be self-power disabled - - bp-disabled-ports : Specifies the ports which will be bus-power disabled - - sp-max-total-current-microamp: Specifies max current consumed by the hub - from VBUS when operating in self-powered hub. It includes the hub - silicon along with all associated circuitry including a permanently - attached peripheral (range: 0 - 100000 uA, default 1000 uA) - - bp-max-total-current-microamp: Specifies max current consumed by the hub - from VBUS when operating in self-powered hub. It includes the hub - silicon along with all associated circuitry including a permanently - attached peripheral (range: 0 - 510000 uA, default 100000 uA) - - sp-max-removable-current-microamp: Specifies max current consumed by the hub - from VBUS when operating in self-powered hub. It includes the hub - silicon along with all associated circuitry excluding a permanently - attached peripheral (range: 0 - 100000 uA, default 1000 uA) - - bp-max-removable-current-microamp: Specifies max current consumed by the hub - from VBUS when operating in self-powered hub. It includes the hub - silicon along with all associated circuitry excluding a permanently - attached peripheral (range: 0 - 510000 uA, default 100000 uA) - - power-on-time-ms : Specifies the time it takes from the time the host - initiates the power-on sequence to a port until the port has adequate - power. The value is given in ms in a 0 - 510 range (default is 100ms). - - swap-dx-lanes : Specifies the ports which will swap the differential-pair - (D+/D-), default is not-swapped. - -Examples: - usb2512b@2c { - compatible = "microchip,usb2512b"; - reg = <0x2c>; - reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - }; - - usb2514b@2c { - compatible = "microchip,usb2514b"; - reg = <0x2c>; - vendor-id = /bits/ 16 <0x0000>; - product-id = /bits/ 16 <0x0000>; - string-support; - manufacturer = "Foo"; - product = "Foo-Bar"; - serial = "1234567890A"; - /* correct misplaced usb connectors on port 1,2 */ - swap-dx-lanes = <1 2>; - }; |