diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl')
35 files changed, 927 insertions, 983 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml index 99080c9eaac3..4e7a456ea4cc 100644 --- a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml +++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml @@ -15,6 +15,7 @@ allOf: properties: compatible: enum: + - amlogic,c3-periphs-pinctrl - amlogic,meson-a1-periphs-pinctrl - amlogic,meson-s4-periphs-pinctrl @@ -36,6 +37,10 @@ patternProperties: - const: mux - const: gpio + gpio-line-names: + minItems: 62 # A1 + maxItems: 82 # S4 + unevaluatedProperties: type: object $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-common.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-common.yaml index a7b29ef0bab6..e707c222a07f 100644 --- a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-common.yaml +++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-common.yaml @@ -41,6 +41,13 @@ $defs: gpio-ranges: maxItems: 1 + patternProperties: + "^.+-hog(-[0-9]+)?$": + type: object + + required: + - gpio-hog + required: - reg - reg-names diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml index 7c9c94ec5b7b..0942ea60c6cd 100644 --- a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml +++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml @@ -36,6 +36,9 @@ patternProperties: - const: ds - const: gpio + gpio-line-names: + maxItems: 15 + unevaluatedProperties: type: object $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml index 4bcb8b60420f..e3c8bde30559 100644 --- a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml +++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml @@ -38,6 +38,9 @@ patternProperties: - const: mux - const: ds + gpio-line-names: + maxItems: 85 + unevaluatedProperties: type: object $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml index 32d99c9b6afc..c1b03147e8ec 100644 --- a/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml +++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml @@ -44,6 +44,10 @@ patternProperties: - const: pull - const: gpio + gpio-line-names: + minItems: 11 # GXL + maxItems: 16 # Meson8 + unevaluatedProperties: type: object $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml index d0441051f34a..4ec85b8248fa 100644 --- a/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml +++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml @@ -45,6 +45,10 @@ patternProperties: - const: pull-enable - const: gpio + gpio-line-names: + minItems: 86 # AXG + maxItems: 120 # Meson8 + unevaluatedProperties: type: object $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml index bef85c25cdef..37c0a74c7c01 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml @@ -25,30 +25,32 @@ properties: reg: maxItems: 2 -patternProperties: - '^.*$': - if: - type: object - then: - patternProperties: - "^function|groups$": - $ref: /schemas/types.yaml#/definitions/string - enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, - ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, - EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0, - GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, - I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK, - MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, - NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, - NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0, - PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, - RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3, - RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD, - SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO, - SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU, - SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, - TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM, - VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2] +additionalProperties: + $ref: pinmux-node.yaml# + additionalProperties: false + + properties: + pins: true + bias-disable: true + + patternProperties: + "^function|groups$": + enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, + ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, + EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0, + GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, + I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK, + MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, + NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, + NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0, + PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, + RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3, + RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD, + SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO, + SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU, + SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, + TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM, + VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2] allOf: - $ref: pinctrl.yaml# @@ -56,8 +58,6 @@ allOf: required: - compatible -additionalProperties: false - examples: - | syscon: scu@1e6e2000 { diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml index 14c391f16899..863da5d80826 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml @@ -37,32 +37,34 @@ properties: 0: compatible with "aspeed,ast2500-gfx", "syscon" 1: compatible with "aspeed,ast2500-lhc", "syscon" -patternProperties: - '^.*$': - if: - type: object - then: - patternProperties: - "^function|groups$": - $ref: /schemas/types.yaml#/definitions/string - enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, - ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, - ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2, - GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5, - I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC, - LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK, - MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, - NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, - NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0, - PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, - RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, - SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1, - SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO, - SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG, - SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3, - TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6, - USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS, - VGAVS, VPI24, VPO, WDTRST1, WDTRST2] +additionalProperties: + $ref: pinmux-node.yaml# + additionalProperties: false + + properties: + pins: true + bias-disable: true + + patternProperties: + "^function|groups$": + enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, + ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, + ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2, + GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5, + I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC, + LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK, + MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, + NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, + NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0, + PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, + RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, + SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1, + SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO, + SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG, + SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3, + TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6, + USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS, + VGAVS, VPI24, VPO, WDTRST1, WDTRST2] allOf: - $ref: pinctrl.yaml# @@ -71,8 +73,6 @@ required: - compatible - aspeed,external-nodes -additionalProperties: false - examples: - | #include <dt-bindings/clock/aspeed-clock.h> diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml index 859a1889dc1e..612464aef98b 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml @@ -23,65 +23,65 @@ properties: compatible: const: aspeed,ast2600-pinctrl -patternProperties: - '^.*$': - if: - type: object - then: - properties: - function: - $ref: /schemas/types.yaml#/definitions/string - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, - ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT, - FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, - GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, - GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, - I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, - I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, - MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, - NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, - NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, - NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11, - PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8, - PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, - RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14, - SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, - SALT9, SD1, SD2, SGPM1, SGPM2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO, - SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2, - SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14, - TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, - THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, - UART13, UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP, - USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4 ] - - groups: - $ref: /schemas/types.yaml#/definitions/string - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, - ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4, - EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, - GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, - GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, - I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, - I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, - LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3, - MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, - NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, - NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, - OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0, - PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2, - PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1, - QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, - RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1, - SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, - SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, - SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPM2, SGPS1, SGPS2, - SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, - SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, - TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, - TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, - TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6, - UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, - WDTRST3, WDTRST4] +additionalProperties: + $ref: pinmux-node.yaml# + additionalProperties: false + + properties: + function: + enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, + ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT, + FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, + GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, + GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, + I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, + I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, + MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, + NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, + NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, + NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11, + PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8, + PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, + RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14, + SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, + SALT9, SD1, SD2, SGPM1, SGPM2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO, + SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2, + SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14, + TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, + THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, + UART13, UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP, + USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4 ] + + groups: + enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, + ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4, + EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, + GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, + GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, + I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, + I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, + LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3, + MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, + NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, + NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, + OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0, + PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2, + PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1, + QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, + RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1, + SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, + SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, + SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPM2, SGPS1, SGPS2, + SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, + SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, + TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, + TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, + TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6, + UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, + WDTRST3, WDTRST4] + + pins: true + bias-disable: true allOf: - $ref: pinctrl.yaml# @@ -89,8 +89,6 @@ allOf: required: - compatible -additionalProperties: false - examples: - | syscon: scu@1e6e2000 { diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt deleted file mode 100644 index e047a198db38..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt +++ /dev/null @@ -1,461 +0,0 @@ -Broadcom BCM281xx Pin Controller - -This is a pin controller for the Broadcom BCM281xx SoC family, which includes -BCM11130, BCM11140, BCM11351, BCM28145, and BCM28155 SoCs. - -=== Pin Controller Node === - -Required Properties: - -- compatible: Must be "brcm,bcm11351-pinctrl" -- reg: Base address of the PAD Controller register block and the size - of the block. - -For example, the following is the bare minimum node: - - pinctrl@35004800 { - compatible = "brcm,bcm11351-pinctrl"; - reg = <0x35004800 0x430>; - }; - -As a pin controller device, in addition to the required properties, this node -should also contain the pin configuration nodes that client devices reference, -if any. - -=== Pin Configuration Node === - -Each pin configuration node is a sub-node of the pin controller node and is a -container of an arbitrary number of subnodes, called pin group nodes in this -document. - -Please refer to the pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the definition of a -"pin configuration node". - -=== Pin Group Node === - -A pin group node specifies the desired pin mux and/or pin configuration for an -arbitrary number of pins. The name of the pin group node is optional and not -used. - -A pin group node only affects the properties specified in the node, and has no -effect on any properties that are omitted. - -The pin group node accepts a subset of the generic pin config properties. For -details generic pin config properties, please refer to pinctrl-bindings.txt -and <include/linux/pinctrl/pinconfig-generic.h>. - -Each pin controlled by this pin controller belong to one of three types: -Standard, I2C, and HDMI. Each type accepts a different set of pin config -properties. A list of pins and their types is provided below. - -Required Properties (applicable to all pins): - -- pins: Multiple strings. Specifies the name(s) of one or more pins to - be configured by this node. - -Optional Properties (for standard pins): - -- function: String. Specifies the pin mux selection. Values - must be one of: "alt1", "alt2", "alt3", "alt4" -- input-schmitt-enable: No arguments. Enable schmitt-trigger mode. -- input-schmitt-disable: No arguments. Disable schmitt-trigger mode. -- bias-pull-up: No arguments. Pull up on pin. -- bias-pull-down: No arguments. Pull down on pin. -- bias-disable: No arguments. Disable pin bias. -- slew-rate: Integer. Meaning depends on configured pin mux: - *_SCL or *_SDA: - 0: Standard(100kbps)& Fast(400kbps) mode - 1: Highspeed (3.4Mbps) mode - IC_DM or IC_DP: - 0: normal slew rate - 1: fast slew rate - Otherwise: - 0: fast slew rate - 1: normal slew rate -- input-enable: No arguments. Enable input (does not affect - output.) -- input-disable: No arguments. Disable input (does not affect - output.) -- drive-strength: Integer. Drive strength in mA. Valid values are - 2, 4, 6, 8, 10, 12, 14, 16 mA. - -Optional Properties (for I2C pins): - -- function: String. Specifies the pin mux selection. Values - must be one of: "alt1", "alt2", "alt3", "alt4" -- bias-pull-up: Integer. Pull up strength in Ohm. There are 3 - pull-up resistors (1.2k, 1.8k, 2.7k) available - in parallel for I2C pins, so the valid values - are: 568, 720, 831, 1080, 1200, 1800, 2700 Ohm. -- bias-disable: No arguments. Disable pin bias. -- slew-rate: Integer. Meaning depends on configured pin mux: - *_SCL or *_SDA: - 0: Standard(100kbps)& Fast(400kbps) mode - 1: Highspeed (3.4Mbps) mode - IC_DM or IC_DP: - 0: normal slew rate - 1: fast slew rate - Otherwise: - 0: fast slew rate - 1: normal slew rate -- input-enable: No arguments. Enable input (does not affect - output.) -- input-disable: No arguments. Disable input (does not affect - output.) - -Optional Properties (for HDMI pins): - -- function: String. Specifies the pin mux selection. Values - must be one of: "alt1", "alt2", "alt3", "alt4" -- slew-rate: Integer. Controls slew rate. - 0: Standard(100kbps)& Fast(400kbps) mode - 1: Highspeed (3.4Mbps) mode -- input-enable: No arguments. Enable input (does not affect - output.) -- input-disable: No arguments. Disable input (does not affect - output.) - -Example: -// pin controller node -pinctrl@35004800 { - compatible = "brcm,bcm11351-pinctrl"; - reg = <0x35004800 0x430>; - - // pin configuration node - dev_a_default: dev_a_active { - //group node defining 1 standard pin - grp_1 { - pins = "std_pin1"; - function = "alt1"; - input-schmitt-enable; - bias-disable; - slew-rate = <1>; - drive-strength = <4>; - }; - - // group node defining 2 I2C pins - grp_2 { - pins = "i2c_pin1", "i2c_pin2"; - function = "alt2"; - bias-pull-up = <720>; - input-enable; - }; - - // group node defining 2 HDMI pins - grp_3 { - pins = "hdmi_pin1", "hdmi_pin2"; - function = "alt3"; - slew-rate = <1>; - }; - - // other pin group nodes - ... - }; - - // other pin configuration nodes - ... -}; - -In the example above, "dev_a_active" is a pin configuration node with a number -of sub-nodes. In the pin group node "grp_1", one pin, "std_pin1", is defined in -the "pins" property. Thus, the remaining properties in the "grp_1" node applies -only to this pin, including the following settings: - - setting pinmux to "alt1" - - enabling schmitt-trigger (hystersis) mode - - disabling pin bias - - setting the slew-rate to 1 - - setting the drive strength to 4 mA -Note that neither "input-enable" nor "input-disable" was specified - the pinctrl -subsystem will therefore leave this property unchanged from whatever state it -was in before applying these changes. - -The "pins" property in the pin group node "grp_2" specifies two pins - -"i2c_pin1" and "i2c_pin2"; the remaining properties in this pin group node, -therefore, applies to both of these pins. The properties include: - - setting pinmux to "alt2" - - setting pull-up resistance to 720 Ohm (ie. enabling 1.2k and 1.8k resistors - in parallel) - - enabling both pins' input -"slew-rate" is not specified in this pin group node, so the slew-rate for these -pins are left as-is. - -Finally, "grp_3" defines two HDMI pins. The following properties are applied to -both pins: - - setting pinmux to "alt3" - - setting slew-rate to 1; for HDMI pins, this corresponds to the 3.4 Mbps - Highspeed mode -The input is neither enabled or disabled, and is left untouched. - -=== Pin Names and Type === - -The following are valid pin names and their pin types: - - "adcsync", Standard - "bat_rm", Standard - "bsc1_scl", I2C - "bsc1_sda", I2C - "bsc2_scl", I2C - "bsc2_sda", I2C - "classgpwr", Standard - "clk_cx8", Standard - "clkout_0", Standard - "clkout_1", Standard - "clkout_2", Standard - "clkout_3", Standard - "clkreq_in_0", Standard - "clkreq_in_1", Standard - "cws_sys_req1", Standard - "cws_sys_req2", Standard - "cws_sys_req3", Standard - "digmic1_clk", Standard - "digmic1_dq", Standard - "digmic2_clk", Standard - "digmic2_dq", Standard - "gpen13", Standard - "gpen14", Standard - "gpen15", Standard - "gpio00", Standard - "gpio01", Standard - "gpio02", Standard - "gpio03", Standard - "gpio04", Standard - "gpio05", Standard - "gpio06", Standard - "gpio07", Standard - "gpio08", Standard - "gpio09", Standard - "gpio10", Standard - "gpio11", Standard - "gpio12", Standard - "gpio13", Standard - "gpio14", Standard - "gps_pablank", Standard - "gps_tmark", Standard - "hdmi_scl", HDMI - "hdmi_sda", HDMI - "ic_dm", Standard - "ic_dp", Standard - "kp_col_ip_0", Standard - "kp_col_ip_1", Standard - "kp_col_ip_2", Standard - "kp_col_ip_3", Standard - "kp_row_op_0", Standard - "kp_row_op_1", Standard - "kp_row_op_2", Standard - "kp_row_op_3", Standard - "lcd_b_0", Standard - "lcd_b_1", Standard - "lcd_b_2", Standard - "lcd_b_3", Standard - "lcd_b_4", Standard - "lcd_b_5", Standard - "lcd_b_6", Standard - "lcd_b_7", Standard - "lcd_g_0", Standard - "lcd_g_1", Standard - "lcd_g_2", Standard - "lcd_g_3", Standard - "lcd_g_4", Standard - "lcd_g_5", Standard - "lcd_g_6", Standard - "lcd_g_7", Standard - "lcd_hsync", Standard - "lcd_oe", Standard - "lcd_pclk", Standard - "lcd_r_0", Standard - "lcd_r_1", Standard - "lcd_r_2", Standard - "lcd_r_3", Standard - "lcd_r_4", Standard - "lcd_r_5", Standard - "lcd_r_6", Standard - "lcd_r_7", Standard - "lcd_vsync", Standard - "mdmgpio0", Standard - "mdmgpio1", Standard - "mdmgpio2", Standard - "mdmgpio3", Standard - "mdmgpio4", Standard - "mdmgpio5", Standard - "mdmgpio6", Standard - "mdmgpio7", Standard - "mdmgpio8", Standard - "mphi_data_0", Standard - "mphi_data_1", Standard - "mphi_data_2", Standard - "mphi_data_3", Standard - "mphi_data_4", Standard - "mphi_data_5", Standard - "mphi_data_6", Standard - "mphi_data_7", Standard - "mphi_data_8", Standard - "mphi_data_9", Standard - "mphi_data_10", Standard - "mphi_data_11", Standard - "mphi_data_12", Standard - "mphi_data_13", Standard - "mphi_data_14", Standard - "mphi_data_15", Standard - "mphi_ha0", Standard - "mphi_hat0", Standard - "mphi_hat1", Standard - "mphi_hce0_n", Standard - "mphi_hce1_n", Standard - "mphi_hrd_n", Standard - "mphi_hwr_n", Standard - "mphi_run0", Standard - "mphi_run1", Standard - "mtx_scan_clk", Standard - "mtx_scan_data", Standard - "nand_ad_0", Standard - "nand_ad_1", Standard - "nand_ad_2", Standard - "nand_ad_3", Standard - "nand_ad_4", Standard - "nand_ad_5", Standard - "nand_ad_6", Standard - "nand_ad_7", Standard - "nand_ale", Standard - "nand_cen_0", Standard - "nand_cen_1", Standard - "nand_cle", Standard - "nand_oen", Standard - "nand_rdy_0", Standard - "nand_rdy_1", Standard - "nand_wen", Standard - "nand_wp", Standard - "pc1", Standard - "pc2", Standard - "pmu_int", Standard - "pmu_scl", I2C - "pmu_sda", I2C - "rfst2g_mtsloten3g", Standard - "rgmii_0_rx_ctl", Standard - "rgmii_0_rxc", Standard - "rgmii_0_rxd_0", Standard - "rgmii_0_rxd_1", Standard - "rgmii_0_rxd_2", Standard - "rgmii_0_rxd_3", Standard - "rgmii_0_tx_ctl", Standard - "rgmii_0_txc", Standard - "rgmii_0_txd_0", Standard - "rgmii_0_txd_1", Standard - "rgmii_0_txd_2", Standard - "rgmii_0_txd_3", Standard - "rgmii_1_rx_ctl", Standard - "rgmii_1_rxc", Standard - "rgmii_1_rxd_0", Standard - "rgmii_1_rxd_1", Standard - "rgmii_1_rxd_2", Standard - "rgmii_1_rxd_3", Standard - "rgmii_1_tx_ctl", Standard - "rgmii_1_txc", Standard - "rgmii_1_txd_0", Standard - "rgmii_1_txd_1", Standard - "rgmii_1_txd_2", Standard - "rgmii_1_txd_3", Standard - "rgmii_gpio_0", Standard - "rgmii_gpio_1", Standard - "rgmii_gpio_2", Standard - "rgmii_gpio_3", Standard - "rtxdata2g_txdata3g1", Standard - "rtxen2g_txdata3g2", Standard - "rxdata3g0", Standard - "rxdata3g1", Standard - "rxdata3g2", Standard - "sdio1_clk", Standard - "sdio1_cmd", Standard - "sdio1_data_0", Standard - "sdio1_data_1", Standard - "sdio1_data_2", Standard - "sdio1_data_3", Standard - "sdio4_clk", Standard - "sdio4_cmd", Standard - "sdio4_data_0", Standard - "sdio4_data_1", Standard - "sdio4_data_2", Standard - "sdio4_data_3", Standard - "sim_clk", Standard - "sim_data", Standard - "sim_det", Standard - "sim_resetn", Standard - "sim2_clk", Standard - "sim2_data", Standard - "sim2_det", Standard - "sim2_resetn", Standard - "sri_c", Standard - "sri_d", Standard - "sri_e", Standard - "ssp_extclk", Standard - "ssp0_clk", Standard - "ssp0_fs", Standard - "ssp0_rxd", Standard - "ssp0_txd", Standard - "ssp2_clk", Standard - "ssp2_fs_0", Standard - "ssp2_fs_1", Standard - "ssp2_fs_2", Standard - "ssp2_fs_3", Standard - "ssp2_rxd_0", Standard - "ssp2_rxd_1", Standard - "ssp2_txd_0", Standard - "ssp2_txd_1", Standard - "ssp3_clk", Standard - "ssp3_fs", Standard - "ssp3_rxd", Standard - "ssp3_txd", Standard - "ssp4_clk", Standard - "ssp4_fs", Standard - "ssp4_rxd", Standard - "ssp4_txd", Standard - "ssp5_clk", Standard - "ssp5_fs", Standard - "ssp5_rxd", Standard - "ssp5_txd", Standard - "ssp6_clk", Standard - "ssp6_fs", Standard - "ssp6_rxd", Standard - "ssp6_txd", Standard - "stat_1", Standard - "stat_2", Standard - "sysclken", Standard - "traceclk", Standard - "tracedt00", Standard - "tracedt01", Standard - "tracedt02", Standard - "tracedt03", Standard - "tracedt04", Standard - "tracedt05", Standard - "tracedt06", Standard - "tracedt07", Standard - "tracedt08", Standard - "tracedt09", Standard - "tracedt10", Standard - "tracedt11", Standard - "tracedt12", Standard - "tracedt13", Standard - "tracedt14", Standard - "tracedt15", Standard - "txdata3g0", Standard - "txpwrind", Standard - "uartb1_ucts", Standard - "uartb1_urts", Standard - "uartb1_urxd", Standard - "uartb1_utxd", Standard - "uartb2_urxd", Standard - "uartb2_utxd", Standard - "uartb3_ucts", Standard - "uartb3_urts", Standard - "uartb3_urxd", Standard - "uartb3_utxd", Standard - "uartb4_ucts", Standard - "uartb4_urts", Standard - "uartb4_urxd", Standard - "uartb4_utxd", Standard - "vc_cam1_scl", I2C - "vc_cam1_sda", I2C - "vc_cam2_scl", I2C - "vc_cam2_sda", I2C - "vc_cam3_scl", I2C - "vc_cam3_sda", I2C diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.yaml new file mode 100644 index 000000000000..90c275295199 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.yaml @@ -0,0 +1,259 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/brcm,bcm11351-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM281xx pin controller + +maintainers: + - Florian Fainelli <florian.fainelli@broadcom.com> + - Ray Jui <rjui@broadcom.com> + - Scott Branden <sbranden@broadcom.com> + +allOf: + - $ref: pinctrl.yaml# + +properties: + compatible: + const: brcm,bcm11351-pinctrl + + reg: + maxItems: 1 + +patternProperties: + '-pins$': + type: object + additionalProperties: false + + patternProperties: + '-grp[0-9]$': + type: object + unevaluatedProperties: false + + properties: + pins: + description: + Specifies the name(s) of one or more pins to be configured by + this node. + items: + enum: [ adcsync, bat_rm, bsc1_scl, bsc1_sda, bsc2_scl, bsc2_sda, + classgpwr, clk_cx8, clkout_0, clkout_1, clkout_2, + clkout_3, clkreq_in_0, clkreq_in_1, cws_sys_req1, + cws_sys_req2, cws_sys_req3, digmic1_clk, digmic1_dq, + digmic2_clk, digmic2_dq, gpen13, gpen14, gpen15, gpio00, + gpio01, gpio02, gpio03, gpio04, gpio05, gpio06, gpio07, + gpio08, gpio09, gpio10, gpio11, gpio12, gpio13, gpio14, + gps_pablank, gps_tmark, hdmi_scl, hdmi_sda, ic_dm, ic_dp, + kp_col_ip_0, kp_col_ip_1, kp_col_ip_2, kp_col_ip_3, + kp_row_op_0, kp_row_op_1, kp_row_op_2, kp_row_op_3, + lcd_b_0, lcd_b_1, lcd_b_2, lcd_b_3, lcd_b_4, lcd_b_5, + lcd_b_6, lcd_b_7, lcd_g_0, lcd_g_1, lcd_g_2, lcd_g_3, + lcd_g_4, lcd_g_5, lcd_g_6, lcd_g_7, lcd_hsync, lcd_oe, + lcd_pclk, lcd_r_0, lcd_r_1, lcd_r_2, lcd_r_3, lcd_r_4, + lcd_r_5, lcd_r_6, lcd_r_7, lcd_vsync, mdmgpio0, mdmgpio1, + mdmgpio2, mdmgpio3, mdmgpio4, mdmgpio5, mdmgpio6, + mdmgpio7, mdmgpio8, mphi_data_0, mphi_data_1, mphi_data_2, + mphi_data_3, mphi_data_4, mphi_data_5, mphi_data_6, + mphi_data_7, mphi_data_8, mphi_data_9, mphi_data_10, + mphi_data_11, mphi_data_12, mphi_data_13, mphi_data_14, + mphi_data_15, mphi_ha0, mphi_hat0, mphi_hat1, mphi_hce0_n, + mphi_hce1_n, mphi_hrd_n, mphi_hwr_n, mphi_run0, mphi_run1, + mtx_scan_clk, mtx_scan_data, nand_ad_0, nand_ad_1, + nand_ad_2, nand_ad_3, nand_ad_4, nand_ad_5, nand_ad_6, + nand_ad_7, nand_ale, nand_cen_0, nand_cen_1, nand_cle, + nand_oen, nand_rdy_0, nand_rdy_1, nand_wen, nand_wp, pc1, + pc2, pmu_int, pmu_scl, pmu_sda, rfst2g_mtsloten3g, + rgmii_0_rx_ctl, rgmii_0_rxc, rgmii_0_rxd_0, rgmii_0_rxd_1, + rgmii_0_rxd_2, rgmii_0_rxd_3, rgmii_0_tx_ctl, rgmii_0_txc, + rgmii_0_txd_0, rgmii_0_txd_1, rgmii_0_txd_2, + rgmii_0_txd_3, rgmii_1_rx_ctl, rgmii_1_rxc, rgmii_1_rxd_0, + rgmii_1_rxd_1, rgmii_1_rxd_2, rgmii_1_rxd_3, + rgmii_1_tx_ctl, rgmii_1_txc, rgmii_1_txd_0, rgmii_1_txd_1, + rgmii_1_txd_2, rgmii_1_txd_3, rgmii_gpio_0, rgmii_gpio_1, + rgmii_gpio_2, rgmii_gpio_3, rtxdata2g_txdata3g1, + rtxen2g_txdata3g2, rxdata3g0, rxdata3g1, rxdata3g2, + sdio1_clk, sdio1_cmd, sdio1_data_0, sdio1_data_1, + sdio1_data_2, sdio1_data_3, sdio4_clk, sdio4_cmd, + sdio4_data_0, sdio4_data_1, sdio4_data_2, sdio4_data_3, + sim_clk, sim_data, sim_det, sim_resetn, sim2_clk, + sim2_data, sim2_det, sim2_resetn, sri_c, sri_d, sri_e, + ssp_extclk, ssp0_clk, ssp0_fs, ssp0_rxd, ssp0_txd, + ssp2_clk, ssp2_fs_0, ssp2_fs_1, ssp2_fs_2, ssp2_fs_3, + ssp2_rxd_0, ssp2_rxd_1, ssp2_txd_0, ssp2_txd_1, ssp3_clk, + ssp3_fs, ssp3_rxd, ssp3_txd, ssp4_clk, ssp4_fs, ssp4_rxd, + ssp4_txd, ssp5_clk, ssp5_fs, ssp5_rxd, ssp5_txd, ssp6_clk, + ssp6_fs, ssp6_rxd, ssp6_txd, stat_1, stat_2, sysclken, + traceclk, tracedt00, tracedt01, tracedt02, tracedt03, + tracedt04, tracedt05, tracedt06, tracedt07, tracedt08 + tracedt09, tracedt10, tracedt11, tracedt12, tracedt13 + tracedt14, tracedt15, txdata3g0, txpwrind, uartb1_ucts, + uartb1_urts, uartb1_urxd, uartb1_utxd, uartb2_urxd, + uartb2_utxd, uartb3_ucts, uartb3_urts, uartb3_urxd, + uartb3_utxd, uartb4_ucts, uartb4_urts, uartb4_urxd, + uartb4_utxd, vc_cam1_scl, vc_cam1_sda, vc_cam2_scl, + vc_cam2_sda, vc_cam3_scl, vc_cam3_sda ] + + function: + description: + Specifies the pin mux selection. + enum: [ alt1, alt2, alt3, alt4 ] + + slew-rate: + description: | + Meaning depends on configured pin mux: + *_scl or *_sda: + 0: Standard (100 kbps) & Fast (400 kbps) mode + 1: Highspeed (3.4 Mbps) mode + ic_dm or ic_dp: + 0: normal slew rate + 1: fast slew rate + Otherwise: + 0: fast slew rate + 1: normal slew rate + + bias-disable: true + input-disable: true + input-enable: true + + required: + - pins + + allOf: + - $ref: pincfg-node.yaml# + + # Optional properties for standard pins + - if: + properties: + pins: + contains: + enum: [ adcsync, bat_rm, classgpwr, clk_cx8, clkout_0, + clkout_1, clkout_2, clkout_3, clkreq_in_0, + clkreq_in_1, cws_sys_req1, cws_sys_req2, + cws_sys_req3, digmic1_clk, digmic1_dq, digmic2_clk, + digmic2_dq, gpen13, gpen14, gpen15, gpio00, gpio01, + gpio02, gpio03, gpio04, gpio05, gpio06, gpio07, + gpio08, gpio09, gpio10, gpio11, gpio12, gpio13, + gpio14, gps_pablank, gps_tmark, ic_dm, ic_dp, + kp_col_ip_0, kp_col_ip_1, kp_col_ip_2, kp_col_ip_3, + kp_row_op_0, kp_row_op_1, kp_row_op_2, kp_row_op_3, + lcd_b_0, lcd_b_1, lcd_b_2, lcd_b_3, lcd_b_4, lcd_b_5, + lcd_b_6, lcd_b_7, lcd_g_0, lcd_g_1, lcd_g_2, lcd_g_3, + lcd_g_4, lcd_g_5, lcd_g_6, lcd_g_7, lcd_hsync, + lcd_oe, lcd_pclk, lcd_r_0, lcd_r_1, lcd_r_2, + lcd_r_3, lcd_r_4, lcd_r_5, lcd_r_6, lcd_r_7, + lcd_vsync, mdmgpio0, mdmgpio1, mdmgpio2, mdmgpio3, + mdmgpio4, mdmgpio5, mdmgpio6, mdmgpio7, mdmgpio8, + mphi_data_0, mphi_data_1, mphi_data_2, mphi_data_3, + mphi_data_4, mphi_data_5, mphi_data_6, mphi_data_7, + mphi_data_8, mphi_data_9, mphi_data_10, + mphi_data_11, mphi_data_12, mphi_data_13, + mphi_data_14, mphi_data_15, mphi_ha0, mphi_hat0, + mphi_hat1, mphi_hce0_n, mphi_hce1_n, mphi_hrd_n, + mphi_hwr_n, mphi_run0, mphi_run1, mtx_scan_clk, + mtx_scan_data, nand_ad_0, nand_ad_1, nand_ad_2, + nand_ad_3, nand_ad_4, nand_ad_5, nand_ad_6, + nand_ad_7, nand_ale, nand_cen_0, nand_cen_1, + nand_cle, nand_oen, nand_rdy_0, nand_rdy_1, + nand_wen, nand_wp, pc1, pc2, pmu_int, + rfst2g_mtsloten3g, rgmii_0_rx_ctl, rgmii_0_rxc, + rgmii_0_rxd_0, rgmii_0_rxd_1, rgmii_0_rxd_2, + rgmii_0_rxd_3, rgmii_0_tx_ctl, rgmii_0_txc, + rgmii_0_txd_0, rgmii_0_txd_1, rgmii_0_txd_2, + rgmii_0_txd_3, rgmii_1_rx_ctl, rgmii_1_rxc, + rgmii_1_rxd_0, rgmii_1_rxd_1, rgmii_1_rxd_2, + rgmii_1_rxd_3, rgmii_1_tx_ctl, rgmii_1_txc, + rgmii_1_txd_0, rgmii_1_txd_1, rgmii_1_txd_2, + rgmii_1_txd_3, rgmii_gpio_0, rgmii_gpio_1, + rgmii_gpio_2, rgmii_gpio_3, rtxdata2g_txdata3g1, + rtxen2g_txdata3g2, rxdata3g0, rxdata3g1, rxdata3g2, + sdio1_clk, sdio1_cmd, sdio1_data_0, sdio1_data_1, + sdio1_data_2, sdio1_data_3, sdio4_clk, sdio4_cmd, + sdio4_data_0, sdio4_data_1, sdio4_data_2, + sdio4_data_3, sim_clk, sim_data, sim_det, + sim_resetn, sim2_clk, sim2_data, sim2_det, + sim2_resetn, sri_c, sri_d, sri_e, ssp_extclk, + ssp0_clk, ssp0_fs, ssp0_rxd, ssp0_txd, ssp2_clk, + ssp2_fs_0, ssp2_fs_1, ssp2_fs_2, ssp2_fs_3, + ssp2_rxd_0, ssp2_rxd_1, ssp2_txd_0, ssp2_txd_1, + ssp3_clk, ssp3_fs, ssp3_rxd, ssp3_txd, ssp4_clk, + ssp4_fs, ssp4_rxd, ssp4_txd, ssp5_clk, ssp5_fs, + ssp5_rxd, ssp5_txd, ssp6_clk, ssp6_fs, ssp6_rxd, + ssp6_txd, stat_1, stat_2, sysclken, traceclk, + tracedt00, tracedt01, tracedt02, tracedt03, + tracedt04, tracedt05, tracedt06, tracedt07, + tracedt08, tracedt09, tracedt10, tracedt11, + tracedt12, tracedt13, tracedt14, tracedt15, + txdata3g0, txpwrind, uartb1_ucts, uartb1_urts, + uartb1_urxd, uartb1_utxd, uartb2_urxd, uartb2_utxd, + uartb3_ucts, uartb3_urts, uartb3_urxd, uartb3_utxd, + uartb4_ucts, uartb4_urts, uartb4_urxd, uartb4_utxd ] + then: + properties: + drive-strength: + enum: [ 2, 4, 6, 8, 10, 12, 14, 16 ] + + bias-disable: true + bias-pull-up: true + bias-pull-down: true + input-schmitt-enable: true + input-schmitt-disable: true + + # Optional properties for I2C pins + - if: + properties: + pins: + contains: + enum: [ bsc1_scl, bsc1_sda, bsc2_scl, bsc2_sda, pmu_scl, + pmu_sda, vc_cam1_scl, vc_cam1_sda, vc_cam2_scl, + vc_cam2_sda, vc_cam3_scl, vc_cam3_sda ] + then: + properties: + bias-pull-up: + description: + There are 3 pull-up resistors (1.2k, 1.8k, 2.7k) available + in parallel for I2C pins. + enum: [ 568, 720, 831, 1080, 1200, 1800, 2700 ] + + bias-disable: true + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + pinctrl@35004800 { + compatible = "brcm,bcm11351-pinctrl"; + reg = <0x35004800 0x430>; + + dev-a-active-pins { + /* group node defining 1 standard pin */ + std-grp0 { + pins = "gpio00"; + function = "alt1"; + input-schmitt-enable; + bias-disable; + slew-rate = <1>; + drive-strength = <4>; + }; + + /* group node defining 2 I2C pins */ + i2c-grp0 { + pins = "bsc1_scl", "bsc1_sda"; + function = "alt2"; + bias-pull-up = <720>; + input-enable; + }; + + /* group node defining 2 HDMI pins */ + hdmi-grp0 { + pins = "hdmi_scl", "hdmi_sda"; + function = "alt3"; + slew-rate = <1>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml b/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml index 222d57541b65..7f30ec2f1e54 100644 --- a/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml +++ b/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml @@ -51,6 +51,10 @@ properties: description: Optional power supply. + reset-gpios: + description: GPIO connected to the XRES pin + maxItems: 1 + patternProperties: '-pins$': type: object diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml index 35723966b70a..890961826c6f 100644 --- a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml @@ -135,7 +135,6 @@ additionalProperties: - $ref: pinmux-node.yaml# properties: - phandle: true function: true groups: true pins: true @@ -147,8 +146,6 @@ additionalProperties: additionalProperties: false - type: object - properties: - phandle: true additionalProperties: type: object allOf: @@ -156,7 +153,6 @@ additionalProperties: - $ref: pinmux-node.yaml# properties: - phandle: true function: true groups: true pins: true diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.yaml index 065dedb3573a..1690c0ef553a 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.yaml +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.yaml @@ -22,8 +22,6 @@ properties: patternProperties: "^pinmux(-[a-z0-9-_]+)?$": type: object - properties: - phandle: true # pin groups additionalProperties: diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.yaml index f924652bef0d..9b7368bd3862 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.yaml +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.yaml @@ -32,8 +32,6 @@ properties: patternProperties: "^pinmux(-[a-z0-9-_]+)?$": type: object - properties: - phandle: true # pin groups additionalProperties: diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.yaml index 60a4bdf01bf2..87b6f4f42f25 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.yaml +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.yaml @@ -23,8 +23,6 @@ properties: patternProperties: "^pinmux(-[a-z0-9-_]+)?$": type: object - properties: - phandle: true # pin groups additionalProperties: diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.yaml index 432ea40209a8..63cd743a30e0 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.yaml +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.yaml @@ -24,8 +24,6 @@ properties: patternProperties: "^pinmux(-[a-z0-9-_]+)?$": type: object - properties: - phandle: true # pin groups additionalProperties: diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.yaml index 28ae2e6d0cbc..e99387a6da5e 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.yaml +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.yaml @@ -22,8 +22,6 @@ properties: patternProperties: "^pinmux(-[a-z0-9-_]+)?$": type: object - properties: - phandle: true # pin groups additionalProperties: diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.yaml index c0eda7848767..36c8f3301a8f 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.yaml +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.yaml @@ -22,8 +22,6 @@ properties: patternProperties: "^pinmux(-[a-z0-9-_]+)?$": type: object - properties: - phandle: true # pin groups additionalProperties: diff --git a/Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt deleted file mode 100644 index b1159434f593..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/oxnas,pinctrl.txt +++ /dev/null @@ -1,56 +0,0 @@ -* Oxford Semiconductor OXNAS SoC Family Pin Controller - -Please refer to pinctrl-bindings.txt, ../gpio/gpio.txt, and -../interrupt-controller/interrupts.txt for generic information regarding -pin controller, GPIO, and interrupt bindings. - -OXNAS 'pin configuration node' is a node of a group of pins which can be -used for a specific device or function. This node represents configurations of -pins, optional function, and optional mux related configuration. - -Required properties for pin controller node: - - compatible: "oxsemi,ox810se-pinctrl" or "oxsemi,ox820-pinctrl" - - oxsemi,sys-ctrl: a phandle to the system controller syscon node - -Required properties for pin configuration sub-nodes: - - pins: List of pins to which the configuration applies. - -Optional properties for pin configuration sub-nodes: ----------------------------------------------------- - - function: Mux function for the specified pins. - - bias-pull-up: Enable weak pull-up. - -Example: - -pinctrl: pinctrl { - compatible = "oxsemi,ox810se-pinctrl"; - - /* Regmap for sys registers */ - oxsemi,sys-ctrl = <&sys>; - - pinctrl_uart2: pinctrl_uart2 { - uart2a { - pins = "gpio31"; - function = "fct3"; - }; - uart2b { - pins = "gpio32"; - function = "fct3"; - }; - }; -}; - -uart2: serial@900000 { - compatible = "ns16550a"; - reg = <0x900000 0x100000>; - clocks = <&sysclk>; - interrupts = <29>; - reg-shift = <0>; - fifo-size = <16>; - reg-io-width = <1>; - current-speed = <115200>; - no-loopback-test; - resets = <&reset 22>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; -}; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt deleted file mode 100644 index bfd222b05495..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt +++ /dev/null @@ -1,262 +0,0 @@ -One-register-per-pin type device tree based pinctrl driver - -Required properties: -- compatible : "pinctrl-single" or "pinconf-single". - "pinctrl-single" means that pinconf isn't supported. - "pinconf-single" means that generic pinconf is supported. - -- reg : offset and length of the register set for the mux registers - -- #pinctrl-cells : number of cells in addition to the index, set to 1 - or 2 for pinctrl-single,pins and set to 2 for pinctrl-single,bits - -- pinctrl-single,register-width : pinmux register access width in bits - -- pinctrl-single,function-mask : mask of allowed pinmux function bits - in the pinmux register - -Optional properties: -- pinctrl-single,function-off : function off mode for disabled state if - available and same for all registers; if not specified, disabling of - pin functions is ignored - -- pinctrl-single,bit-per-mux : boolean to indicate that one register controls - more than one pin, for which "pinctrl-single,function-mask" property specifies - position mask of pin. - -- pinctrl-single,drive-strength : array of value that are used to configure - drive strength in the pinmux register. They're value of drive strength - current and drive strength mask. - - /* drive strength current, mask */ - pinctrl-single,power-source = <0x30 0xf0>; - -- pinctrl-single,bias-pullup : array of value that are used to configure the - input bias pullup in the pinmux register. - - /* input, enabled pullup bits, disabled pullup bits, mask */ - pinctrl-single,bias-pullup = <0 1 0 1>; - -- pinctrl-single,bias-pulldown : array of value that are used to configure the - input bias pulldown in the pinmux register. - - /* input, enabled pulldown bits, disabled pulldown bits, mask */ - pinctrl-single,bias-pulldown = <2 2 0 2>; - - * Two bits to control input bias pullup and pulldown: User should use - pinctrl-single,bias-pullup & pinctrl-single,bias-pulldown. One bit means - pullup, and the other one bit means pulldown. - * Three bits to control input bias enable, pullup and pulldown. User should - use pinctrl-single,bias-pullup & pinctrl-single,bias-pulldown. Input bias - enable bit should be included in pullup or pulldown bits. - * Although driver could set PIN_CONFIG_BIAS_DISABLE, there's no property as - pinctrl-single,bias-disable. Because pinctrl single driver could implement - it by calling pulldown, pullup disabled. - -- pinctrl-single,input-schmitt : array of value that are used to configure - input schmitt in the pinmux register. In some silicons, there're two input - schmitt value (rising-edge & falling-edge) in the pinmux register. - - /* input schmitt value, mask */ - pinctrl-single,input-schmitt = <0x30 0x70>; - -- pinctrl-single,input-schmitt-enable : array of value that are used to - configure input schmitt enable or disable in the pinmux register. - - /* input, enable bits, disable bits, mask */ - pinctrl-single,input-schmitt-enable = <0x30 0x40 0 0x70>; - -- pinctrl-single,low-power-mode : array of value that are used to configure - low power mode of this pin. For some silicons, the low power mode will - control the output of the pin when the pad including the pin enter low - power mode. - /* low power mode value, mask */ - pinctrl-single,low-power-mode = <0x288 0x388>; - -- pinctrl-single,gpio-range : list of value that are used to configure a GPIO - range. They're value of subnode phandle, pin base in pinctrl device, pin - number in this range, GPIO function value of this GPIO range. - The number of parameters is depend on #pinctrl-single,gpio-range-cells - property. - - /* pin base, nr pins & gpio function */ - pinctrl-single,gpio-range = <&range 0 3 0>, <&range 3 9 1>; - -- interrupt-controller : standard interrupt controller binding if using - interrupts for wake-up events for example. In this case pinctrl-single - is set up as a chained interrupt controller and the wake-up interrupts - can be requested by the drivers using request_irq(). - -- #interrupt-cells : standard interrupt binding if using interrupts - -This driver assumes that there is only one register for each pin (unless the -pinctrl-single,bit-per-mux is set), and uses the common pinctrl bindings as -specified in the pinctrl-bindings.txt document in this directory. - -The pin configuration nodes for pinctrl-single are specified as pinctrl -register offset and values using pinctrl-single,pins. Only the bits specified -in pinctrl-single,function-mask are updated. - -When #pinctrl-cells = 1, then setting a pin for a device could be done with: - - pinctrl-single,pins = <0xdc 0x118>; - -Where 0xdc is the offset from the pinctrl register base address for the device -pinctrl register, and 0x118 contains the desired value of the pinctrl register. - -When #pinctrl-cells = 2, then setting a pin for a device could be done with: - - pinctrl-single,pins = <0xdc 0x30 0x07>; - -Where 0x30 is the pin configuration value and 0x07 is the pin mux mode value. -These two values are OR'd together to produce the value stored at offset 0xdc. -See the device example and static board pins example below for more information. - -In case when one register changes more than one pin's mux the -pinctrl-single,bits need to be used which takes three parameters: - - pinctrl-single,bits = <0xdc 0x18 0xff>; - -Where 0xdc is the offset from the pinctrl register base address for the -device pinctrl register, 0x18 is the desired value, and 0xff is the sub mask to -be used when applying this change to the register. - - -Optional sub-node: In case some pins could be configured as GPIO in the pinmux -register, those pins could be defined as a GPIO range. This sub-node is required -by pinctrl-single,gpio-range property. - -Required properties in sub-node: -- #pinctrl-single,gpio-range-cells : the number of parameters after phandle in - pinctrl-single,gpio-range property. - - range: gpio-range { - #pinctrl-single,gpio-range-cells = <3>; - }; - - -Example: - -/* SoC common file */ - -/* first controller instance for pins in core domain */ -pmx_core: pinmux@4a100040 { - compatible = "pinctrl-single"; - reg = <0x4a100040 0x0196>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0xffff>; -}; - -/* second controller instance for pins in wkup domain */ -pmx_wkup: pinmux@4a31e040 { - compatible = "pinctrl-single"; - reg = <0x4a31e040 0x0038>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0xffff>; -}; - -control_devconf0: pinmux@48002274 { - compatible = "pinctrl-single"; - reg = <0x48002274 4>; /* Single register */ - #address-cells = <1>; - #size-cells = <0>; - pinctrl-single,bit-per-mux; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0x5F>; -}; - -/* third controller instance for pins in gpio domain */ -pmx_gpio: pinmux@d401e000 { - compatible = "pinconf-single"; - reg = <0xd401e000 0x0330>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <7>; - - /* sparse GPIO range could be supported */ - pinctrl-single,gpio-range = <&range 0 3 0>, <&range 3 9 1>, - <&range 12 1 0>, <&range 13 29 1>, - <&range 43 1 0>, <&range 44 49 1>, - <&range 94 1 1>, <&range 96 2 1>; - - range: gpio-range { - #pinctrl-single,gpio-range-cells = <3>; - }; -}; - - -/* board specific .dts file */ - -&pmx_core { - - /* - * map all board specific static pins enabled by the pinctrl driver - * itself during the boot (or just set them up in the bootloader) - */ - pinctrl-names = "default"; - pinctrl-0 = <&board_pins>; - - board_pins: pinmux_board_pins { - pinctrl-single,pins = < - 0x6c 0xf - 0x6e 0xf - 0x70 0xf - 0x72 0xf - >; - }; - - uart0_pins: pinmux_uart0_pins { - pinctrl-single,pins = < - 0x208 0 /* UART0_RXD (IOCFG138) */ - 0x20c 0 /* UART0_TXD (IOCFG139) */ - >; - pinctrl-single,bias-pulldown = <0 2 2>; - pinctrl-single,bias-pullup = <0 1 1>; - }; - - /* map uart2 pins */ - uart2_pins: pinmux_uart2_pins { - pinctrl-single,pins = < - 0xd8 0x118 - 0xda 0 - 0xdc 0x118 - 0xde 0 - >; - }; -}; - -&control_devconf0 { - mcbsp1_pins: pinmux_mcbsp1_pins { - pinctrl-single,bits = < - 0x00 0x18 0x18 /* FSR/CLKR signal from FSX/CLKX pin */ - >; - }; - - mcbsp2_clks_pins: pinmux_mcbsp2_clks_pins { - pinctrl-single,bits = < - 0x00 0x40 0x40 /* McBSP2 CLKS from McBSP_CLKS pin */ - >; - }; - -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; -}; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml new file mode 100644 index 000000000000..45a307d3ce16 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml @@ -0,0 +1,207 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/pinctrl-single.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic Pin Controller with a Single Register for One or More Pins + +maintainers: + - Tony Lindgren <tony@atomide.com> + +description: + Some pin controller devices use a single register for one or more pins. The + range of pin control registers can vary from one to many for each controller + instance. Some SoCs from Altera, Broadcom, HiSilicon, Ralink, and TI have this + kind of pin controller instances. + +properties: + compatible: + oneOf: + - enum: + - pinctrl-single + - pinconf-single + - items: + - enum: + - ti,am437-padconf + - ti,am654-padconf + - ti,dra7-padconf + - ti,omap2420-padconf + - ti,omap2430-padconf + - ti,omap3-padconf + - ti,omap4-padconf + - ti,omap5-padconf + - const: pinctrl-single + + reg: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + '#pinctrl-cells': + description: + Number of cells. Usually 2, consisting of register offset, pin configuration + value, and pinmux mode. Some controllers may use 1 for just offset and value. + enum: [ 1, 2 ] + + pinctrl-single,bit-per-mux: + description: Optional flag to indicate register controls more than one pin + type: boolean + + pinctrl-single,function-mask: + description: Mask of the allowed register bits + $ref: /schemas/types.yaml#/definitions/uint32 + + pinctrl-single,function-off: + description: Optional function off mode for disabled state + $ref: /schemas/types.yaml#/definitions/uint32 + + pinctrl-single,register-width: + description: Width of pin specific bits in the register + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 8, 16, 32 ] + + pinctrl-single,gpio-range: + description: Optional list of pin base, nr pins & gpio function + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle of a gpio-range node + - description: pin base + - description: number of pins + - description: gpio function + + '#gpio-range-cells': + description: No longer needed, may exist in older files for gpio-ranges + deprecated: true + const: 3 + + gpio-range: + description: Optional node for gpio range cells + type: object + additionalProperties: false + properties: + '#pinctrl-single,gpio-range-cells': + description: Number of gpio range cells + const: 3 + $ref: /schemas/types.yaml#/definitions/uint32 + +patternProperties: + '-pins(-[0-9]+)?$|-pin$': + description: + Pin group node name using naming ending in -pins followed by an optional + instance number + type: object + additionalProperties: false + + properties: + pinctrl-single,pins: + description: + Array of pins as described in pinmux-node.yaml for pinctrl-pin-array + $ref: /schemas/types.yaml#/definitions/uint32-array + + pinctrl-single,bits: + description: Register bit configuration for pinctrl-single,bit-per-mux + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: register offset + - description: value + - description: pin bitmask in the register + + pinctrl-single,bias-pullup: + description: Optional bias pull up configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: input + - description: enabled pull up bits + - description: disabled pull up bits + - description: bias pull up mask + + pinctrl-single,bias-pulldown: + description: Optional bias pull down configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: input + - description: enabled pull down bits + - description: disabled pull down bits + - description: bias pull down mask + + pinctrl-single,drive-strength: + description: Optional drive strength configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: drive strength current + - description: drive strength mask + + pinctrl-single,input-schmitt: + description: Optional input schmitt configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: input + - description: enable bits + - description: disable bits + - description: input schmitt mask + + pinctrl-single,low-power-mode: + description: Optional low power mode configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: low power mode value + - description: low power mode mask + + pinctrl-single,slew-rate: + description: Optional slew rate configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: slew rate + - description: slew rate mask + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + - reg + - pinctrl-single,register-width + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <1>; + #size-cells = <1>; + + pinmux@4a100040 { + compatible = "pinctrl-single"; + reg = <0x4a100040 0x0196>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <2>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0xffff>; + pinctrl-single,gpio-range = <&range 0 3 0>; + range: gpio-range { + #pinctrl-single,gpio-range-cells = <3>; + }; + + uart2-pins { + pinctrl-single,pins = + <0xd8 0x118>, + <0xda 0>, + <0xdc 0x118>, + <0xde 0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml index 8aaf50181cef..3f8ad07c7cfd 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml @@ -26,6 +26,7 @@ properties: - qcom,pm6350-gpio - qcom,pm7250b-gpio - qcom,pm7325-gpio + - qcom,pm7550ba-gpio - qcom,pm8005-gpio - qcom,pm8008-gpio - qcom,pm8018-gpio @@ -53,6 +54,8 @@ properties: - qcom,pm8994-gpio - qcom,pm8998-gpio - qcom,pma8084-gpio + - qcom,pmc8180-gpio + - qcom,pmc8180c-gpio - qcom,pmi632-gpio - qcom,pmi8950-gpio - qcom,pmi8994-gpio @@ -68,6 +71,7 @@ properties: - qcom,pms405-gpio - qcom,pmx55-gpio - qcom,pmx65-gpio + - qcom,pmx75-gpio - enum: - qcom,spmi-gpio @@ -172,6 +176,7 @@ allOf: compatible: contains: enum: + - qcom,pm7550ba-gpio - qcom,pm8226-gpio - qcom,pm8350b-gpio - qcom,pm8550ve-gpio @@ -301,6 +306,7 @@ allOf: contains: enum: - qcom,pmx65-gpio + - qcom,pmx75-gpio then: properties: gpio-line-names: @@ -413,6 +419,7 @@ $defs: - gpio1-gpio9 for pm6350 - gpio1-gpio12 for pm7250b - gpio1-gpio10 for pm7325 + - gpio1-gpio8 for pm7550ba - gpio1-gpio4 for pm8005 - gpio1-gpio2 for pm8008 - gpio1-gpio6 for pm8018 @@ -456,6 +463,7 @@ $defs: - gpio1-gpio11 for pmx55 (holes on gpio3, gpio7, gpio10 and gpio11) - gpio1-gpio16 for pmx65 + - gpio1-gpio16 for pmx75 items: pattern: "^gpio([0-9]+)$" diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml index fa51fa9536f7..00c5a00e35fc 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml @@ -17,11 +17,6 @@ properties: compatible: const: qcom,sc7280-lpass-lpi-pinctrl - qcom,adsp-bypass-mode: - description: - Tells ADSP is in bypass mode. - type: boolean - reg: maxItems: 2 diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml new file mode 100644 index 000000000000..abac3311fc55 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml @@ -0,0 +1,135 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM6115 SoC LPASS LPI TLMM + +maintainers: + - Konrad Dybcio <konradybcio@kernel.org> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem + (LPASS) Low Power Island (LPI) of Qualcomm SM6115 SoC. + +properties: + compatible: + const: qcom,sm6115-lpass-lpi-pinctrl + + reg: + items: + - description: LPASS LPI TLMM Control and Status registers + - description: LPASS LPI MCC registers + + clocks: + items: + - description: LPASS Audio voting clock + + clock-names: + items: + - const: audio + + gpio-controller: true + + "#gpio-cells": + description: Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + gpio-ranges: + maxItems: 1 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm6115-lpass-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm6115-lpass-state" + additionalProperties: false + +$defs: + qcom-sm6115-lpass-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: /schemas/pinctrl/pincfg-node.yaml + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|1[0-8])$" + + function: + enum: [ dmic01_clk, dmic01_data, dmic23_clk, dmic23_data, gpio, i2s1_clk, + i2s1_data, i2s1_ws, i2s2_clk, i2s2_data, i2s2_ws, i2s3_clk, + i2s3_data, i2s3_ws, qua_mi2s_data, qua_mi2s_sclk, qua_mi2s_ws, + swr_rx_clk, swr_rx_data, swr_tx_clk, swr_tx_data, wsa_mclk ] + description: + Specify the alternative function to be configured for the specified + pins. + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + default: 2 + description: + Selects the drive strength for the specified pins, in mA. + + slew-rate: + enum: [0, 1, 2, 3] + default: 0 + description: | + 0: No adjustments + 1: Higher Slew rate (faster edges) + 2: Lower Slew rate (slower edges) + 3: Reserved (No adjustments) + + bias-bus-hold: true + bias-pull-down: true + bias-pull-up: true + bias-disable: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + - function + + additionalProperties: false + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + - reg + - clocks + - clock-names + - gpio-controller + - "#gpio-cells" + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/sound/qcom,q6afe.h> + + lpass_tlmm: pinctrl@a7c0000 { + compatible = "qcom,sm6115-lpass-lpi-pinctrl"; + reg = <0x0a7c0000 0x20000>, + <0x0a950000 0x10000>; + clocks = <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "audio"; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 19>; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml new file mode 100644 index 000000000000..2e65ae08dd21 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml @@ -0,0 +1,143 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8350 SoC LPASS LPI TLMM + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem + (LPASS) Low Power Island (LPI) of Qualcomm SM8350 SoC. + +properties: + compatible: + const: qcom,sm8350-lpass-lpi-pinctrl + + reg: + items: + - description: LPASS LPI TLMM Control and Status registers + - description: LPASS LPI MCC registers + + clocks: + items: + - description: LPASS Core voting clock + - description: LPASS Audio voting clock + + clock-names: + items: + - const: core + - const: audio + + gpio-controller: true + + "#gpio-cells": + description: Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + gpio-ranges: + maxItems: 1 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm8350-lpass-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm8350-lpass-state" + additionalProperties: false + +$defs: + qcom-sm8350-lpass-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: /schemas/pinctrl/pincfg-node.yaml + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|1[0-9]|2[0-2])$" + + function: + enum: [ dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic3_clk, + dmic3_data, dmic4_clk, dmic4_data, ext_mclk1_a, ext_mclk1_b, + ext_mclk1_c, ext_mclk1_d, ext_mclk1_e, gpio, i2s0_clk, + i2s0_data, i2s0_ws, i2s1_clk, i2s1_data, i2s1_ws, i2s2_clk, + i2s2_data, i2s2_ws, i2s3_clk, i2s3_data, i2s3_ws, i2s4_clk, + i2s4_data, i2s4_ws, slimbus_clk, slimbus_data, swr_rx_clk, + swr_rx_data, swr_tx_clk, swr_tx_data, wsa_swr_clk, + wsa_swr_data, wsa2_swr_clk, wsa2_swr_data ] + description: + Specify the alternative function to be configured for the specified + pins. + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + default: 2 + description: + Selects the drive strength for the specified pins, in mA. + + slew-rate: + enum: [0, 1, 2, 3] + default: 0 + description: | + 0: No adjustments + 1: Higher Slew rate (faster edges) + 2: Lower Slew rate (slower edges) + 3: Reserved (No adjustments) + + bias-bus-hold: true + bias-pull-down: true + bias-pull-up: true + bias-disable: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + - function + + additionalProperties: false + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + - reg + - clocks + - clock-names + - gpio-controller + - "#gpio-cells" + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/sound/qcom,q6afe.h> + + lpass_tlmm: pinctrl@33c0000 { + compatible = "qcom,sm8350-lpass-lpi-pinctrl"; + reg = <0x033c0000 0x20000>, + <0x03550000 0x10000>; + + clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio"; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 15>; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml index 0fc3c0f52c19..181cd1676c0a 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml @@ -107,7 +107,6 @@ additionalProperties: Client device subnodes use below standard properties. properties: - phandle: true function: true groups: true pins: true @@ -127,9 +126,6 @@ additionalProperties: additionalProperties: false - type: object - properties: - phandle: true - additionalProperties: $ref: "#/additionalProperties/anyOf/0" diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml index 83800fcf0ce4..2bd7d47d0fdb 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml @@ -108,7 +108,6 @@ additionalProperties: Integers values in "pinmux" argument list are assembled as: ((PORT * 16 + PIN) | MUX_FUNC << 16) - phandle: true input-enable: true output-enable: true @@ -118,9 +117,6 @@ additionalProperties: additionalProperties: false - type: object - properties: - phandle: true - additionalProperties: $ref: "#/additionalProperties/anyOf/0" diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml index 37173a64fed2..8271e7b2c162 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml @@ -37,40 +37,37 @@ properties: gpio-ranges: maxItems: 1 -patternProperties: - "^.*$": - if: - type: object - then: - allOf: - - $ref: pincfg-node.yaml# - - $ref: pinmux-node.yaml# +additionalProperties: + type: object + + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + description: + The child nodes of the pin controller designate pins to be used for + specific peripheral functions or as GPIO. + + A pin multiplexing sub-node describes how to configure a set of + (or a single) pin in some desired alternate function mode. + The values for the pinmux properties are a combination of port name, + pin number and the desired function index. Use the RZA2_PINMUX macro + located in include/dt-bindings/pinctrl/r7s9210-pinctrl.h to easily + define these. + For assigning GPIO pins, use the macro RZA2_PIN also in + to express the desired port pin. + + properties: + pinmux: description: - The child nodes of the pin controller designate pins to be used for - specific peripheral functions or as GPIO. + Values are constructed from GPIO port number, pin number, and + alternate function configuration number using the RZA2_PINMUX() + helper macro in r7s9210-pinctrl.h. - A pin multiplexing sub-node describes how to configure a set of - (or a single) pin in some desired alternate function mode. - The values for the pinmux properties are a combination of port name, - pin number and the desired function index. Use the RZA2_PINMUX macro - located in include/dt-bindings/pinctrl/r7s9210-pinctrl.h to easily - define these. - For assigning GPIO pins, use the macro RZA2_PIN also in - to express the desired port pin. + required: + - pinmux - properties: - phandle: true - - pinmux: - description: - Values are constructed from GPIO port number, pin number, and - alternate function configuration number using the RZA2_PINMUX() - helper macro in r7s9210-pinctrl.h. - - required: - - pinmux - - additionalProperties: false + additionalProperties: false allOf: - $ref: pinctrl.yaml# @@ -82,8 +79,6 @@ required: - '#gpio-cells' - gpio-ranges -additionalProperties: false - examples: - | #include <dt-bindings/pinctrl/r7s9210-pinctrl.h> diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml index 9ce1a07fc015..145c5442f268 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml @@ -83,7 +83,6 @@ additionalProperties: Client device subnodes use below standard properties. properties: - phandle: true pinmux: description: Values are constructed from GPIO port number, pin number, and @@ -106,9 +105,6 @@ additionalProperties: line-name: true - type: object - properties: - phandle: true - additionalProperties: $ref: "#/additionalProperties/anyOf/0" diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml index 19d4d2facfb4..816688580e33 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml @@ -74,7 +74,6 @@ additionalProperties: offset by 10. Additional identifiers are provided to specify the MDIO source peripheral. - phandle: true bias-disable: true bias-pull-up: description: Pull up the pin with 50 kOhm @@ -91,9 +90,6 @@ additionalProperties: $ref: "#/additionalProperties/anyOf/0" - type: object - properties: - phandle: true - additionalProperties: $ref: "#/additionalProperties/anyOf/0" diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml index c87161f2954f..cb81a17bd0b1 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml @@ -63,7 +63,6 @@ additionalProperties: Client device subnodes use below standard properties. properties: - phandle: true pinmux: description: Values are constructed from GPIO port number, pin number, and @@ -87,9 +86,6 @@ additionalProperties: line-name: true - type: object - properties: - phandle: true - additionalProperties: $ref: "#/additionalProperties/anyOf/0" diff --git a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml index a6f34df82e90..880da721a927 100644 --- a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml @@ -32,7 +32,6 @@ additionalProperties: - $ref: pinmux-node.yaml# properties: - phandle: true function: true groups: true pins: true @@ -49,7 +48,6 @@ additionalProperties: - $ref: pinmux-node.yaml# properties: - phandle: true function: true groups: true pins: true diff --git a/Documentation/devicetree/bindings/pinctrl/ti,omap-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/ti,omap-pinctrl.txt deleted file mode 100644 index 88c80273da91..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/ti,omap-pinctrl.txt +++ /dev/null @@ -1,13 +0,0 @@ -OMAP Pinctrl definitions - -Required properties: -- compatible : Should be one of: - "ti,omap2420-padconf" - OMAP2420 compatible pinctrl - "ti,omap2430-padconf" - OMAP2430 compatible pinctrl - "ti,omap3-padconf" - OMAP3 compatible pinctrl - "ti,omap4-padconf" - OMAP4 compatible pinctrl - "ti,omap5-padconf" - OMAP5 compatible pinctrl - "ti,dra7-padconf" - DRA7 compatible pinctrl - "ti,am437-padconf" - AM437x compatible pinctrl - -See Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt for further details. diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml index 24ad0614e61b..01b6f2b57843 100644 --- a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml @@ -273,6 +273,10 @@ patternProperties: slew-rate: enum: [0, 1] + output-enable: + description: + This will internally disable the tri-state for MIO pins. + drive-strength: description: Selects the drive strength for MIO pins, in mA. |