diff options
Diffstat (limited to 'Documentation/devicetree/bindings/input')
11 files changed, 543 insertions, 176 deletions
diff --git a/Documentation/devicetree/bindings/input/dlg,da7280.txt b/Documentation/devicetree/bindings/input/dlg,da7280.txt deleted file mode 100644 index 96ee5d50e111..000000000000 --- a/Documentation/devicetree/bindings/input/dlg,da7280.txt +++ /dev/null @@ -1,108 +0,0 @@ -Dialog Semiconductor DA7280 Haptics bindings - -Required properties: -- compatible: Should be "dlg,da7280". -- reg: Specifies the I2C slave address. - -- interrupt-parent : Specifies the phandle of the interrupt controller to - which the IRQs from DA7280 are delivered to. - -- dlg,actuator-type: Set Actuator type. it should be one of: - "LRA" - Linear Resonance Actuator type. - "ERM-bar" - Bar type Eccentric Rotating Mass. - "ERM-coin" - Coin type Eccentric Rotating Mass. - -- dlg,const-op-mode: Haptic operation mode for FF_CONSTANT. - Possible values: - 1 - Direct register override(DRO) mode triggered by i2c(default), - 2 - PWM data source mode controlled by PWM duty, -- dlg,periodic-op-mode: Haptic operation mode for FF_PERIODIC. - Possible values: - 1 - Register triggered waveform memory(RTWM) mode, the pattern - assigned to the PS_SEQ_ID played as much times as PS_SEQ_LOOP, - 2 - Edge triggered waveform memory(ETWM) mode, external GPI(N) - control are required to enable/disable and it needs to keep - device enabled by sending magnitude (X > 0), - the pattern is assigned to the GPI(N)_SEQUENCE_ID below. - The default value is 1 for both of the operation modes. - For more details, please see the datasheet. - -- dlg,nom-microvolt: Nominal actuator voltage rating. - Valid values: 0 - 6000000. -- dlg,abs-max-microvolt: Absolute actuator maximum voltage rating. - Valid values: 0 - 6000000. -- dlg,imax-microamp: Actuator max current rating. - Valid values: 0 - 252000. - Default: 130000. -- dlg,impd-micro-ohms: the impedance of the actuator in micro ohms. - Valid values: 0 - 1500000000. - -Optional properties: -- pwms : phandle to the physical PWM(Pulse Width Modulation) device. - PWM properties should be named "pwms". And number of cell is different - for each pwm device. - (See Documentation/devicetree/bindings/pwm/pwm.txt - for further information relating to pwm properties) - -- dlg,ps-seq-id: the PS_SEQ_ID(pattern ID in waveform memory inside chip) - to play back when RTWM-MODE is enabled. - Valid range: 0 - 15. -- dlg,ps-seq-loop: the PS_SEQ_LOOP, Number of times the pre-stored sequence - pointed to by PS_SEQ_ID or GPI(N)_SEQUENCE_ID is repeated. - Valid range: 0 - 15. -- dlg,gpiN-seq-id: the GPI(N)_SEQUENCE_ID, pattern to play - when gpi0 is triggered, 'N' must be 0 - 2. - Valid range: 0 - 15. -- dlg,gpiN-mode: the pattern mode which can select either - "Single-pattern" or "Multi-pattern", 'N' must be 0 - 2. -- dlg,gpiN-polarity: gpiN polarity which can be chosen among - "Rising-edge", "Falling-edge" and "Both-edge", - 'N' must be 0 - 2 - Haptic will work by this edge option in case of ETWM mode. - -- dlg,resonant-freq-hz: use in case of LRA. - the frequency range: 50 - 300. - Default: 205. - -- dlg,bemf-sens-enable: Enable for internal loop computations. -- dlg,freq-track-enable: Enable for resonant frequency tracking. -- dlg,acc-enable: Enable for active acceleration. -- dlg,rapid-stop-enable: Enable for rapid stop. -- dlg,amp-pid-enable: Enable for the amplitude PID. -- dlg,mem-array: Customized waveform memory(patterns) data downloaded to - the device during initialization. This is an array of 100 values(u8). - -For further information, see device datasheet. - -====== - -Example: - - haptics: da7280-haptics@4a { - compatible = "dlg,da7280"; - reg = <0x4a>; - interrupt-parent = <&gpio6>; - interrupts = <11 IRQ_TYPE_LEVEL_LOW>; - dlg,actuator-type = "LRA"; - dlg,dlg,const-op-mode = <1>; - dlg,dlg,periodic-op-mode = <1>; - dlg,nom-microvolt = <2000000>; - dlg,abs-max-microvolt = <2000000>; - dlg,imax-microamp = <170000>; - dlg,resonant-freq-hz = <180>; - dlg,impd-micro-ohms = <10500000>; - dlg,freq-track-enable; - dlg,rapid-stop-enable; - dlg,mem-array = < - 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 - 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 - 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 - 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 - 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 - 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 - 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 - 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 - 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 - 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 - >; - }; diff --git a/Documentation/devicetree/bindings/input/dlg,da7280.yaml b/Documentation/devicetree/bindings/input/dlg,da7280.yaml new file mode 100644 index 000000000000..0d06755aaaa8 --- /dev/null +++ b/Documentation/devicetree/bindings/input/dlg,da7280.yaml @@ -0,0 +1,248 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/dlg,da7280.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dialog Semiconductor DA7280 Low Power High-Definition Haptic Driver + +maintainers: + - Roy Im <roy.im.opensource@diasemi.com> + +properties: + compatible: + const: dlg,da7280 + + reg: + maxItems: 1 + description: I2C address of the device. + + interrupts: + maxItems: 1 + + dlg,actuator-type: + enum: + - LRA # Linear Resonance Actuator type + - ERM-bar # Bar type Eccentric Rotating Mass + - ERM-coin # Coin type Eccentric Rotating Mass + + dlg,const-op-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 1 # Direct register override (DRO) mode triggered by i2c (default) + - 2 # PWM data source mode controlled by PWM duty + description: + Haptic operation mode for FF_CONSTANT + + dlg,periodic-op-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 1 # Register triggered waveform memory(RTWM) mode, the pattern + # assigned to the PS_SEQ_ID played as much times as PS_SEQ_LOOP + - 2 # Edge triggered waveform memory(ETWM) mode, external GPI(N) + # control are required to enable/disable and it needs to keep + # device enabled by sending magnitude (X > 0), + # the pattern is assigned to the GPI(N)_SEQUENCE_ID below + default: 1 + description: + Haptic operation mode for FF_PERIODIC. + The default value is 1 for both of the operation modes. + For more details, please see the datasheet + + dlg,nom-microvolt: + minimum: 0 + maximum: 6000000 + description: + Nominal actuator voltage rating + + dlg,abs-max-microvolt: + minimum: 0 + maximum: 6000000 + description: + Absolute actuator maximum voltage rating + + dlg,imax-microamp: + minimum: 0 + maximum: 252000 + default: 130000 + description: + Actuator max current rating + + dlg,impd-micro-ohms: + minimum: 0 + maximum: 1500000000 + description: + Impedance of the actuator + + pwms: + maxItems: 1 + + dlg,ps-seq-id: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + The PS_SEQ_ID(pattern ID in waveform memory inside chip) + to play back when RTWM-MODE is enabled + + dlg,ps-seq-loop: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + The PS_SEQ_LOOP, Number of times the pre-stored sequence pointed to by + PS_SEQ_ID or GPI(N)_SEQUENCE_ID is repeated + + dlg,gpi0-seq-id: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + the GPI0_SEQUENCE_ID, pattern to play when gpi0 is triggered + + dlg,gpi1-seq-id: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + the GPI1_SEQUENCE_ID, pattern to play when gpi1 is triggered + + dlg,gpi2-seq-id: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + the GPI2_SEQUENCE_ID, pattern to play when gpi2 is triggered + + dlg,gpi0-mode: + enum: + - Single-pattern + - Multi-pattern + description: + Pattern mode for gpi0 + + dlg,gpi1-mode: + enum: + - Single-pattern + - Multi-pattern + description: + Pattern mode for gpi1 + + dlg,gpi2-mode: + enum: + - Single-pattern + - Multi-pattern + description: + Pattern mode for gpi2 + + dlg,gpi0-polarity: + enum: + - Rising-edge + - Falling-edge + - Both-edge + description: + gpi0 polarity, Haptic will work by this edge option in case of ETWM mode + + dlg,gpi1-polarity: + enum: + - Rising-edge + - Falling-edge + - Both-edge + description: + gpi1 polarity, Haptic will work by this edge option in case of ETWM mode + + dlg,gpi2-polarity: + enum: + - Rising-edge + - Falling-edge + - Both-edge + description: + gpi2 polarity, Haptic will work by this edge option in case of ETWM mode + + dlg,resonant-freq-hz: + minimum: 50 + maximum: 300 + default: 205 + + dlg,bemf-sens-enable: + $ref: /schemas/types.yaml#/definitions/flag + description: + Enable for internal loop computations + + dlg,freq-track-enable: + $ref: /schemas/types.yaml#/definitions/flag + description: + Enable for resonant frequency tracking + + dlg,acc-enable: + $ref: /schemas/types.yaml#/definitions/flag + description: + Enable for active acceleration + + dlg,rapid-stop-enable: + $ref: /schemas/types.yaml#/definitions/flag + description: + Enable for rapid stop + + dlg,amp-pid-enable: + $ref: /schemas/types.yaml#/definitions/flag + description: + Enable for the amplitude PID + + dlg,mem-array: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 100 + description: + Customized waveform memory (patterns) data downloaded to the device during initialization. + Each entry value must be included between 0 and 255. + +required: + - compatible + - reg + - interrupts + - dlg,actuator-type + - dlg,const-op-mode + - dlg,periodic-op-mode + - dlg,nom-microvolt + - dlg,abs-max-microvolt + - dlg,imax-microamp + - dlg,impd-micro-ohms + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + haptics@4a { + compatible = "dlg,da7280"; + reg = <0x4a>; + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + dlg,actuator-type = "LRA"; + dlg,const-op-mode = <1>; + dlg,periodic-op-mode = <1>; + dlg,nom-microvolt = <2000000>; + dlg,abs-max-microvolt = <2000000>; + dlg,imax-microamp = <170000>; + dlg,resonant-freq-hz = <180>; + dlg,impd-micro-ohms = <10500000>; + dlg,freq-track-enable; + dlg,rapid-stop-enable; + dlg,mem-array = <0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/elan,ekth6915.yaml b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml index cb3e1801b0d3..0840e4ab28b7 100644 --- a/Documentation/devicetree/bindings/input/elan,ekth6915.yaml +++ b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml @@ -4,14 +4,14 @@ $id: http://devicetree.org/schemas/input/elan,ekth6915.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Elan eKTH6915 touchscreen controller +title: Elan I2C-HID touchscreen controllers maintainers: - Douglas Anderson <dianders@chromium.org> description: - Supports the Elan eKTH6915 touchscreen controller. - This touchscreen controller uses the i2c-hid protocol with a reset GPIO. + Supports the Elan eKTH6915 and other I2C-HID touchscreen controllers. + These touchscreen controller use the i2c-hid protocol with a reset GPIO. allOf: - $ref: /schemas/input/touchscreen/touchscreen.yaml# @@ -23,12 +23,14 @@ properties: - enum: - elan,ekth5015m - const: elan,ekth6915 + - items: + - const: elan,ekth8d18 + - const: elan,ekth6a12nay - enum: - elan,ekth6915 - elan,ekth6a12nay - reg: - const: 0x10 + reg: true interrupts: maxItems: 1 diff --git a/Documentation/devicetree/bindings/input/syna,rmi4.yaml b/Documentation/devicetree/bindings/input/syna,rmi4.yaml index b522c8d3ce0d..f369385ffaf0 100644 --- a/Documentation/devicetree/bindings/input/syna,rmi4.yaml +++ b/Documentation/devicetree/bindings/input/syna,rmi4.yaml @@ -89,6 +89,24 @@ properties: required: - reg + rmi4-f1a@1a: + type: object + additionalProperties: false + $ref: input.yaml# + description: + RMI4 Function 1A is for capacitive keys. + + properties: + reg: + maxItems: 1 + + linux,keycodes: + minItems: 1 + maxItems: 4 + + required: + - reg + patternProperties: "^rmi4-f1[12]@1[12]$": type: object @@ -201,6 +219,7 @@ allOf: examples: - | + #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/interrupt-controller/irq.h> i2c { @@ -234,6 +253,7 @@ examples: rmi4-f1a@1a { reg = <0x1a>; + linux,keycodes = <KEY_BACK KEY_HOME KEY_MENU>; }; }; }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml index 70a922e213f2..7d3edb58f72d 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml @@ -43,6 +43,7 @@ properties: - focaltech,ft5452 - focaltech,ft6236 - focaltech,ft8201 + - focaltech,ft8716 - focaltech,ft8719 reg: @@ -103,16 +104,9 @@ properties: minimum: 0 maximum: 255 - touchscreen-size-x: true - touchscreen-size-y: true - touchscreen-fuzz-x: true - touchscreen-fuzz-y: true - touchscreen-inverted-x: true - touchscreen-inverted-y: true - touchscreen-swapped-x-y: true interrupt-controller: true -additionalProperties: false +unevaluatedProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/input/touchscreen/lpc32xx-tsc.txt b/Documentation/devicetree/bindings/input/touchscreen/lpc32xx-tsc.txt deleted file mode 100644 index 41cbf4b7a670..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/lpc32xx-tsc.txt +++ /dev/null @@ -1,16 +0,0 @@ -* NXP LPC32xx SoC Touchscreen Controller (TSC) - -Required properties: -- compatible: must be "nxp,lpc3220-tsc" -- reg: physical base address of the controller and length of memory mapped - region. -- interrupts: The TSC/ADC interrupt - -Example: - - tsc@40048000 { - compatible = "nxp,lpc3220-tsc"; - reg = <0x40048000 0x1000>; - interrupt-parent = <&mic>; - interrupts = <39 0>; - }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/nxp,lpc3220-tsc.yaml b/Documentation/devicetree/bindings/input/touchscreen/nxp,lpc3220-tsc.yaml new file mode 100644 index 000000000000..b6feda127c7b --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/nxp,lpc3220-tsc.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/nxp,lpc3220-tsc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP LPC32xx SoC Touchscreen Controller (TSC) + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + const: nxp,lpc3220-tsc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/lpc32xx-clock.h> + + touchscreen@40048000 { + compatible = "nxp,lpc3220-tsc"; + reg = <0x40048000 0x1000>; + interrupt-parent = <&mic>; + interrupts = <39 0>; + clocks = <&clk LPC32XX_CLK_ADC>; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/sitronix,st1232.yaml b/Documentation/devicetree/bindings/input/touchscreen/sitronix,st1232.yaml index 1d8ca19fd37a..e7ee7a0d74c4 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/sitronix,st1232.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/sitronix,st1232.yaml @@ -37,6 +37,7 @@ unevaluatedProperties: false examples: - | + #include <dt-bindings/input/linux-event-codes.h> i2c { #address-cells = <1>; #size-cells = <0>; @@ -46,5 +47,33 @@ examples: reg = <0x55>; interrupts = <2 0>; gpios = <&gpio1 166 0>; + + touch-overlay { + segment-0 { + label = "Touchscreen"; + x-origin = <0>; + x-size = <240>; + y-origin = <40>; + y-size = <280>; + }; + + segment-1a { + label = "Camera light"; + linux,code = <KEY_LIGHTS_TOGGLE>; + x-origin = <40>; + x-size = <40>; + y-origin = <0>; + y-size = <40>; + }; + + segment-2a { + label = "Power"; + linux,code = <KEY_POWER>; + x-origin = <160>; + x-size = <40>; + y-origin = <0>; + y-size = <40>; + }; + }; }; }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti.tsc2007.yaml b/Documentation/devicetree/bindings/input/touchscreen/ti.tsc2007.yaml new file mode 100644 index 000000000000..8bb4bc7df4fa --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/ti.tsc2007.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/ti.tsc2007.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments tsc2007 touchscreen controller + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + const: ti,tsc2007 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + ti,x-plate-ohms: + description: X-plate resistance in ohms. + + gpios: true + + pendown-gpio: true + + ti,max-rt: + $ref: /schemas/types.yaml#/definitions/uint32 + description: maximum pressure. + + ti,fuzzx: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + specifies the absolute input fuzz x value. + If set, it will permit noise in the data up to +- the value given to the fuzz + parameter, that is used to filter noise from the event stream. + + ti,fuzzy: + $ref: /schemas/types.yaml#/definitions/uint32 + description: specifies the absolute input fuzz y value. + + ti,fuzzz: + $ref: /schemas/types.yaml#/definitions/uint32 + description: specifies the absolute input fuzz z value. + + ti,poll-period: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + how much time to wait (in milliseconds) before reading again the + values from the tsc2007. + +required: + - compatible + - reg + - ti,x-plate-ohms + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touch@49 { + compatible = "ti,tsc2007"; + reg = <0x49>; + interrupt-parent = <&gpio4>; + interrupts = <0x0 0x8>; + gpios = <&gpio4 0 0>; + ti,x-plate-ohms = <180>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml index 431c13335c40..3e3572aa483a 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml @@ -87,6 +87,125 @@ properties: touchscreen-y-plate-ohms: description: Resistance of the Y-plate in Ohms + touch-overlay: + description: | + List of nodes defining segments (touch areas) on the touchscreen. + + This object can be used to describe a series of segments to restrict + the region within touch events are reported or buttons with a specific + functionality. + + This is of special interest if the touchscreen is shipped with a physical + overlay on top of it with a frame that hides some part of the original + touchscreen area. Printed buttons on that overlay are also a typical + use case. + + A new touchscreen area is defined as a sub-node without a key code. If a + key code is defined in the sub-node, it will be interpreted as a button. + + The x-origin and y-origin properties of a touchscreen area define the + offset of a new origin from where the touchscreen events are referenced. + This offset is applied to the events accordingly. The x-size and y-size + properties define the size of the touchscreen effective area. + + The following example shows a new touchscreen area with the new origin + (0',0') for the touch events generated by the device. + + Touchscreen (full area) + ┌────────────────────────────────────────┐ + │ ┌───────────────────────────────┐ │ + │ │ │ │ + │ ├ y-size │ │ + │ │ │ │ + │ │ touchscreen area │ │ + │ │ (no key code) │ │ + │ │ │ │ + │ │ x-size │ │ + │ ┌└──────────────┴────────────────┘ │ + │(0',0') │ + ┌└────────────────────────────────────────┘ + (0,0) + + where (0',0') = (0+x-origin,0+y-origin) + + Sub-nodes with key codes report the touch events on their surface as key + events instead. + + The following example shows a touchscreen with a single button on it. + + Touchscreen (full area) + ┌───────────────────────────────────┐ + │ │ + │ │ + │ ┌─────────┐ │ + │ │button 0 │ │ + │ │KEY_POWER│ │ + │ └─────────┘ │ + │ │ + │ │ + ┌└───────────────────────────────────┘ + (0,0) + + Segments defining buttons and clipped toushcreen areas can be combined + as shown in the following example. + In that case only the events within the touchscreen area are reported + as touch events. Events within the button areas report their associated + key code. Any events outside the defined areas are ignored. + + Touchscreen (full area) + ┌─────────┬──────────────────────────────┐ + │ │ │ + │ │ ┌───────────────────────┐ │ + │ button 0│ │ │ │ + │KEY_POWER│ │ │ │ + │ │ │ │ │ + ├─────────┤ │ touchscreen area │ │ + │ │ │ (no key code) │ │ + │ │ │ │ │ + │ button 1│ │ │ │ + │ KEY_INFO│ ┌└───────────────────────┘ │ + │ │(0',0') │ + ┌└─────────┴──────────────────────────────┘ + (0,0) + + type: object + + patternProperties: + '^segment-': + type: object + description: + Each segment is represented as a sub-node. + properties: + x-origin: + description: horizontal origin of the node area + $ref: /schemas/types.yaml#/definitions/uint32 + + y-origin: + description: vertical origin of the node area + $ref: /schemas/types.yaml#/definitions/uint32 + + x-size: + description: horizontal resolution of the node area + $ref: /schemas/types.yaml#/definitions/uint32 + + y-size: + description: vertical resolution of the node area + $ref: /schemas/types.yaml#/definitions/uint32 + + label: + description: descriptive name of the segment + $ref: /schemas/types.yaml#/definitions/string + + linux,code: true + + required: + - x-origin + - y-origin + - x-size + - y-size + + unevaluatedProperties: false + dependencies: touchscreen-size-x: [ touchscreen-size-y ] touchscreen-size-y: [ touchscreen-size-x ] diff --git a/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt b/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt deleted file mode 100644 index 210486a3fb11..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt +++ /dev/null @@ -1,39 +0,0 @@ -* Texas Instruments tsc2007 touchscreen controller - -Required properties: -- compatible: must be "ti,tsc2007". -- reg: I2C address of the chip. -- ti,x-plate-ohms: X-plate resistance in ohms. - -Optional properties: -- gpios: the interrupt gpio the chip is connected to (through the penirq pin). - The penirq pin goes to low when the panel is touched. - (see GPIO binding[1] for more details). -- interrupts: (gpio) interrupt to which the chip is connected - (see interrupt binding[0]). -- ti,max-rt: maximum pressure. -- ti,fuzzx: specifies the absolute input fuzz x value. - If set, it will permit noise in the data up to +- the value given to the fuzz - parameter, that is used to filter noise from the event stream. -- ti,fuzzy: specifies the absolute input fuzz y value. -- ti,fuzzz: specifies the absolute input fuzz z value. -- ti,poll-period: how much time to wait (in milliseconds) before reading again the - values from the tsc2007. - -[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt -[1]: Documentation/devicetree/bindings/gpio/gpio.txt - -Example: - &i2c1 { - /* ... */ - tsc2007@49 { - compatible = "ti,tsc2007"; - reg = <0x49>; - interrupt-parent = <&gpio4>; - interrupts = <0x0 0x8>; - gpios = <&gpio4 0 0>; - ti,x-plate-ohms = <180>; - }; - - /* ... */ - }; |