diff options
Diffstat (limited to 'Documentation/devicetree/bindings/fpga')
6 files changed, 112 insertions, 48 deletions
diff --git a/Documentation/devicetree/bindings/fpga/altera-passive-serial.txt b/Documentation/devicetree/bindings/fpga/altera-passive-serial.txt deleted file mode 100644 index 48478bc07e29..000000000000 --- a/Documentation/devicetree/bindings/fpga/altera-passive-serial.txt +++ /dev/null @@ -1,29 +0,0 @@ -Altera Passive Serial SPI FPGA Manager - -Altera FPGAs support a method of loading the bitstream over what is -referred to as "passive serial". -The passive serial link is not technically SPI, and might require extra -circuits in order to play nicely with other SPI slaves on the same bus. - -See https://www.altera.com/literature/hb/cyc/cyc_c51013.pdf - -Required properties: -- compatible: Must be one of the following: - "altr,fpga-passive-serial", - "altr,fpga-arria10-passive-serial" -- reg: SPI chip select of the FPGA -- nconfig-gpios: config pin (referred to as nCONFIG in the manual) -- nstat-gpios: status pin (referred to as nSTATUS in the manual) - -Optional properties: -- confd-gpios: confd pin (referred to as CONF_DONE in the manual) - -Example: - fpga: fpga@0 { - compatible = "altr,fpga-passive-serial"; - spi-max-frequency = <20000000>; - reg = <0>; - nconfig-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; - nstat-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; - confd-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; - }; diff --git a/Documentation/devicetree/bindings/fpga/altr,fpga-passive-serial.yaml b/Documentation/devicetree/bindings/fpga/altr,fpga-passive-serial.yaml new file mode 100644 index 000000000000..ffb7cc54556f --- /dev/null +++ b/Documentation/devicetree/bindings/fpga/altr,fpga-passive-serial.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/fpga/altr,fpga-passive-serial.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Altera Passive Serial SPI FPGA Manager + +maintainers: + - Fabio Estevam <festevam@denx.de> + +description: | + Altera FPGAs support a method of loading the bitstream over what is + referred to as "passive serial". + The passive serial link is not technically SPI, and might require extra + circuits in order to play nicely with other SPI slaves on the same bus. + + See https://www.altera.com/literature/hb/cyc/cyc_c51013.pdf + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - altr,fpga-passive-serial + - altr,fpga-arria10-passive-serial + + spi-max-frequency: + maximum: 20000000 + + reg: + maxItems: 1 + + nconfig-gpios: + description: + Config pin (referred to as nCONFIG in the manual). + maxItems: 1 + + nstat-gpios: + description: + Status pin (referred to as nSTATUS in the manual). + maxItems: 1 + + confd-gpios: + description: + confd pin (referred to as CONF_DONE in the manual) + maxItems: 1 + +required: + - compatible + - reg + - nconfig-gpios + - nstat-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + fpga@0 { + compatible = "altr,fpga-passive-serial"; + reg = <0>; + nconfig-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>; + nstat-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>; + confd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/fpga/fpga-region.yaml b/Documentation/devicetree/bindings/fpga/fpga-region.yaml index 77554885a6c4..7d2d3b7aa4b7 100644 --- a/Documentation/devicetree/bindings/fpga/fpga-region.yaml +++ b/Documentation/devicetree/bindings/fpga/fpga-region.yaml @@ -316,6 +316,7 @@ examples: reg = <0x40000000 0x10000>; gpio-controller; #gpio-cells = <2>; + clocks = <&clk>; }; }; diff --git a/Documentation/devicetree/bindings/fpga/intel,stratix10-soc-fpga-mgr.yaml b/Documentation/devicetree/bindings/fpga/intel,stratix10-soc-fpga-mgr.yaml new file mode 100644 index 000000000000..6e536d6b28a9 --- /dev/null +++ b/Documentation/devicetree/bindings/fpga/intel,stratix10-soc-fpga-mgr.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/fpga/intel,stratix10-soc-fpga-mgr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel Stratix10 SoC FPGA Manager + +maintainers: + - Mahesh Rao <mahesh.rao@altera.com> + - Adrian Ng Ho Yin <adrian.ho.yin.ng@altera.com> + - Niravkumar L Rabara <nirav.rabara@altera.com> + +description: + The Intel Stratix10 SoC consists of a 64-bit quad-core ARM Cortex A53 hard + processor system (HPS) and a Secure Device Manager (SDM). The Stratix10 + SoC FPGA Manager driver is used to configure/reconfigure the FPGA fabric + on the die.The driver communicates with SDM/ATF via the stratix10-svc + platform driver for performing its operations. + +properties: + compatible: + enum: + - intel,stratix10-soc-fpga-mgr + - intel,agilex-soc-fpga-mgr + +required: + - compatible + +additionalProperties: false + +examples: + - | + fpga-mgr { + compatible = "intel,stratix10-soc-fpga-mgr"; + }; diff --git a/Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt b/Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt deleted file mode 100644 index 0f874137ca46..000000000000 --- a/Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt +++ /dev/null @@ -1,18 +0,0 @@ -Intel Stratix10 SoC FPGA Manager - -Required properties: -The fpga_mgr node has the following mandatory property, must be located under -firmware/svc node. - -- compatible : should contain "intel,stratix10-soc-fpga-mgr" or - "intel,agilex-soc-fpga-mgr" - -Example: - - firmware { - svc { - fpga_mgr: fpga-mgr { - compatible = "intel,stratix10-soc-fpga-mgr"; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml b/Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml index 80833462f620..41b368d54557 100644 --- a/Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml +++ b/Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml @@ -27,7 +27,7 @@ additionalProperties: false examples: - | versal_fpga: versal-fpga { - compatible = "xlnx,versal-fpga"; + compatible = "xlnx,versal-fpga"; }; ... |