summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt')
-rw-r--r--Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt637
1 files changed, 0 insertions, 637 deletions
diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
deleted file mode 100644
index 31ab72cba3d4..000000000000
--- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
+++ /dev/null
@@ -1,637 +0,0 @@
-Allwinner A10 Display Pipeline
-==============================
-
-The Allwinner A10 Display pipeline is composed of several components
-that are going to be documented below:
-
-For all connections between components up to the TCONs in the display
-pipeline, when there are multiple components of the same type at the
-same depth, the local endpoint ID must be the same as the remote
-component's index. For example, if the remote endpoint is Frontend 1,
-then the local endpoint ID must be 1.
-
- Frontend 0 [0] ------- [0] Backend 0 [0] ------- [0] TCON 0
- [1] -- -- [1] [1] -- -- [1]
- \ / \ /
- X X
- / \ / \
- [0] -- -- [0] [0] -- -- [0]
- Frontend 1 [1] ------- [1] Backend 1 [1] ------- [1] TCON 1
-
-For a two pipeline system such as the one depicted above, the lines
-represent the connections between the components, while the numbers
-within the square brackets corresponds to the ID of the local endpoint.
-
-The same rule also applies to DE 2.0 mixer-TCON connections:
-
- Mixer 0 [0] ----------- [0] TCON 0
- [1] ---- ---- [1]
- \ /
- X
- / \
- [0] ---- ---- [0]
- Mixer 1 [1] ----------- [1] TCON 1
-
-HDMI Encoder
-------------
-
-The HDMI Encoder supports the HDMI video and audio outputs, and does
-CEC. It is one end of the pipeline.
-
-Required properties:
- - compatible: value must be one of:
- * allwinner,sun4i-a10-hdmi
- * allwinner,sun5i-a10s-hdmi
- * allwinner,sun6i-a31-hdmi
- - reg: base address and size of memory-mapped region
- - interrupts: interrupt associated to this IP
- - clocks: phandles to the clocks feeding the HDMI encoder
- * ahb: the HDMI interface clock
- * mod: the HDMI module clock
- * ddc: the HDMI ddc clock (A31 only)
- * pll-0: the first video PLL
- * pll-1: the second video PLL
- - clock-names: the clock names mentioned above
- - resets: phandle to the reset control for the HDMI encoder (A31 only)
- - dmas: phandles to the DMA channels used by the HDMI encoder
- * ddc-tx: The channel for DDC transmission
- * ddc-rx: The channel for DDC reception
- * audio-tx: The channel used for audio transmission
- - dma-names: the channel names mentioned above
-
- - ports: A ports node with endpoint definitions as defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt. The
- first port should be the input endpoint. The second should be the
- output, usually to an HDMI connector.
-
-DWC HDMI TX Encoder
--------------------
-
-The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
-with Allwinner's own PHY IP. It supports audio and video outputs and CEC.
-
-These DT bindings follow the Synopsys DWC HDMI TX bindings defined in
-Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the
-following device-specific properties.
-
-Required properties:
-
- - compatible: value must be one of:
- * "allwinner,sun8i-a83t-dw-hdmi"
- * "allwinner,sun50i-a64-dw-hdmi", "allwinner,sun8i-a83t-dw-hdmi"
- * "allwinner,sun50i-h6-dw-hdmi"
- - reg: base address and size of memory-mapped region
- - reg-io-width: See dw_hdmi.txt. Shall be 1.
- - interrupts: HDMI interrupt number
- - clocks: phandles to the clocks feeding the HDMI encoder
- * iahb: the HDMI bus clock
- * isfr: the HDMI register clock
- * tmds: TMDS clock
- * cec: HDMI CEC clock (H6 only)
- * hdcp: HDCP clock (H6 only)
- * hdcp-bus: HDCP bus clock (H6 only)
- - clock-names: the clock names mentioned above
- - resets:
- * ctrl: HDMI controller reset
- * hdcp: HDCP reset (H6 only)
- - reset-names: reset names mentioned above
- - phys: phandle to the DWC HDMI PHY
- - phy-names: must be "phy"
-
- - ports: A ports node with endpoint definitions as defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt. The
- first port should be the input endpoint. The second should be the
- output, usually to an HDMI connector.
-
-Optional properties:
- - hvcc-supply: the VCC power supply of the controller
-
-DWC HDMI PHY
-------------
-
-Required properties:
- - compatible: value must be one of:
- * allwinner,sun8i-a83t-hdmi-phy
- * allwinner,sun8i-h3-hdmi-phy
- * allwinner,sun8i-r40-hdmi-phy
- * allwinner,sun50i-a64-hdmi-phy
- * allwinner,sun50i-h6-hdmi-phy
- - reg: base address and size of memory-mapped region
- - clocks: phandles to the clocks feeding the HDMI PHY
- * bus: the HDMI PHY interface clock
- * mod: the HDMI PHY module clock
- - clock-names: the clock names mentioned above
- - resets: phandle to the reset controller driving the PHY
- - reset-names: must be "phy"
-
-H3, A64 and R40 HDMI PHY require additional clocks:
- - pll-0: parent of phy clock
- - pll-1: second possible phy clock parent (A64/R40 only)
-
-TV Encoder
-----------
-
-The TV Encoder supports the composite and VGA output. It is one end of
-the pipeline.
-
-Required properties:
- - compatible: value should be "allwinner,sun4i-a10-tv-encoder".
- - reg: base address and size of memory-mapped region
- - clocks: the clocks driving the TV encoder
- - resets: phandle to the reset controller driving the encoder
-
-- ports: A ports node with endpoint definitions as defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt. The
- first port should be the input endpoint.
-
-TCON
-----
-
-The TCON acts as a timing controller for RGB, LVDS and TV interfaces.
-
-Required properties:
- - compatible: value must be either:
- * allwinner,sun4i-a10-tcon
- * allwinner,sun5i-a13-tcon
- * allwinner,sun6i-a31-tcon
- * allwinner,sun6i-a31s-tcon
- * allwinner,sun7i-a20-tcon
- * allwinner,sun8i-a23-tcon
- * allwinner,sun8i-a33-tcon
- * allwinner,sun8i-a83t-tcon-lcd
- * allwinner,sun8i-a83t-tcon-tv
- * allwinner,sun8i-r40-tcon-tv
- * allwinner,sun8i-v3s-tcon
- * allwinner,sun9i-a80-tcon-lcd
- * allwinner,sun9i-a80-tcon-tv
- * "allwinner,sun50i-a64-tcon-lcd", "allwinner,sun8i-a83t-tcon-lcd"
- * "allwinner,sun50i-a64-tcon-tv", "allwinner,sun8i-a83t-tcon-tv"
- * allwinner,sun50i-h6-tcon-tv, allwinner,sun8i-r40-tcon-tv
- - reg: base address and size of memory-mapped region
- - interrupts: interrupt associated to this IP
- - clocks: phandles to the clocks feeding the TCON.
- - 'ahb': the interface clocks
- - 'tcon-ch0': The clock driving the TCON channel 0, if supported
- - resets: phandles to the reset controllers driving the encoder
- - "lcd": the reset line for the TCON
- - "edp": the reset line for the eDP block (A80 only)
-
- - clock-names: the clock names mentioned above
- - reset-names: the reset names mentioned above
- - clock-output-names: Name of the pixel clock created, if TCON supports
- channel 0.
-
-- ports: A ports node with endpoint definitions as defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt. The
- first port should be the input endpoint, the second one the output
-
- The output may have multiple endpoints. TCON can have 1 or 2 channels,
- usually with the first channel being used for the panels interfaces
- (RGB, LVDS, etc.), and the second being used for the outputs that
- require another controller (TV Encoder, HDMI, etc.). The endpoints
- will take an extra property, allwinner,tcon-channel, to specify the
- channel the endpoint is associated to. If that property is not
- present, the endpoint number will be used as the channel number.
-
-For TCONs with channel 0, there is one more clock required:
- - 'tcon-ch0': The clock driving the TCON channel 0
-For TCONs with channel 1, there is one more clock required:
- - 'tcon-ch1': The clock driving the TCON channel 1
-
-When TCON support LVDS (all TCONs except TV TCONs on A83T, R40 and those found
-in A13, H3, H5 and V3s SoCs), you need one more reset line:
- - 'lvds': The reset line driving the LVDS logic
-
-And on the A23, A31, A31s and A33, you need one more clock line:
- - 'lvds-alt': An alternative clock source, separate from the TCON channel 0
- clock, that can be used to drive the LVDS clock
-
-TCON TOP
---------
-
-TCON TOPs main purpose is to configure whole display pipeline. It determines
-relationships between mixers and TCONs, selects source TCON for HDMI, muxes
-LCD and TV encoder GPIO output, selects TV encoder clock source and contains
-additional TV TCON and DSI gates.
-
-It allows display pipeline to be configured in very different ways:
-
- / LCD0/LVDS0
- / [0] TCON-LCD0
- | \ MIPI DSI
- mixer0 |
- \ / [1] TCON-LCD1 - LCD1/LVDS1
- TCON-TOP
- / \ [2] TCON-TV0 [0] - TVE0/RGB
- mixer1 | \
- | TCON-TOP - HDMI
- | /
- \ [3] TCON-TV1 [1] - TVE1/RGB
-
-Note that both TCON TOP references same physical unit. Both mixers can be
-connected to any TCON. Not all TCON TOP variants support all features.
-
-Required properties:
- - compatible: value must be one of:
- * allwinner,sun8i-r40-tcon-top
- * allwinner,sun50i-h6-tcon-top
- - reg: base address and size of the memory-mapped region.
- - clocks: phandle to the clocks feeding the TCON TOP
- * bus: TCON TOP interface clock
- * tcon-tv0: TCON TV0 clock
- * tve0: TVE0 clock (R40 only)
- * tcon-tv1: TCON TV1 clock (R40 only)
- * tve1: TVE0 clock (R40 only)
- * dsi: MIPI DSI clock (R40 only)
- - clock-names: clock name mentioned above
- - resets: phandle to the reset line driving the TCON TOP
- - #clock-cells : must contain 1
- - clock-output-names: Names of clocks created for TCON TV0 channel clock,
- TCON TV1 channel clock (R40 only) and DSI channel clock (R40 only), in
- that order.
-
-- ports: A ports node with endpoint definitions as defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt. 6 ports should
- be defined:
- * port 0 is input for mixer0 mux
- * port 1 is output for mixer0 mux
- * port 2 is input for mixer1 mux
- * port 3 is output for mixer1 mux
- * port 4 is input for HDMI mux
- * port 5 is output for HDMI mux
- All output endpoints for mixer muxes and input endpoints for HDMI mux should
- have reg property with the id of the target TCON, as shown in above graph
- (0-3 for mixer muxes and 0-1 for HDMI mux). All ports should have only one
- endpoint connected to remote endpoint.
-
-DRC
----
-
-The DRC (Dynamic Range Controller), found in the latest Allwinner SoCs
-(A31, A23, A33, A80), allows to dynamically adjust pixel
-brightness/contrast based on histogram measurements for LCD content
-adaptive backlight control.
-
-
-Required properties:
- - compatible: value must be one of:
- * allwinner,sun6i-a31-drc
- * allwinner,sun6i-a31s-drc
- * allwinner,sun8i-a23-drc
- * allwinner,sun8i-a33-drc
- * allwinner,sun9i-a80-drc
- - reg: base address and size of the memory-mapped region.
- - interrupts: interrupt associated to this IP
- - clocks: phandles to the clocks feeding the DRC
- * ahb: the DRC interface clock
- * mod: the DRC module clock
- * ram: the DRC DRAM clock
- - clock-names: the clock names mentioned above
- - resets: phandles to the reset line driving the DRC
-
-- ports: A ports node with endpoint definitions as defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt. The
- first port should be the input endpoints, the second one the outputs
-
-Display Engine Backend
-----------------------
-
-The display engine backend exposes layers and sprites to the
-system.
-
-Required properties:
- - compatible: value must be one of:
- * allwinner,sun4i-a10-display-backend
- * allwinner,sun5i-a13-display-backend
- * allwinner,sun6i-a31-display-backend
- * allwinner,sun7i-a20-display-backend
- * allwinner,sun8i-a23-display-backend
- * allwinner,sun8i-a33-display-backend
- * allwinner,sun9i-a80-display-backend
- - reg: base address and size of the memory-mapped region.
- - interrupts: interrupt associated to this IP
- - clocks: phandles to the clocks feeding the frontend and backend
- * ahb: the backend interface clock
- * mod: the backend module clock
- * ram: the backend DRAM clock
- - clock-names: the clock names mentioned above
- - resets: phandles to the reset controllers driving the backend
-
-- ports: A ports node with endpoint definitions as defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt. The
- first port should be the input endpoints, the second one the output
-
-On the A33, some additional properties are required:
- - reg needs to have an additional region corresponding to the SAT
- - reg-names need to be set, with "be" and "sat"
- - clocks and clock-names need to have a phandle to the SAT bus
- clocks, whose name will be "sat"
- - resets and reset-names need to have a phandle to the SAT bus
- resets, whose name will be "sat"
-
-DEU
----
-
-The DEU (Detail Enhancement Unit), found in the Allwinner A80 SoC,
-can sharpen the display content in both luma and chroma channels.
-
-Required properties:
- - compatible: value must be one of:
- * allwinner,sun9i-a80-deu
- - reg: base address and size of the memory-mapped region.
- - interrupts: interrupt associated to this IP
- - clocks: phandles to the clocks feeding the DEU
- * ahb: the DEU interface clock
- * mod: the DEU module clock
- * ram: the DEU DRAM clock
- - clock-names: the clock names mentioned above
- - resets: phandles to the reset line driving the DEU
-
-- ports: A ports node with endpoint definitions as defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt. The
- first port should be the input endpoints, the second one the outputs
-
-Display Engine Frontend
------------------------
-
-The display engine frontend does formats conversion, scaling,
-deinterlacing and color space conversion.
-
-Required properties:
- - compatible: value must be one of:
- * allwinner,sun4i-a10-display-frontend
- * allwinner,sun5i-a13-display-frontend
- * allwinner,sun6i-a31-display-frontend
- * allwinner,sun7i-a20-display-frontend
- * allwinner,sun8i-a23-display-frontend
- * allwinner,sun8i-a33-display-frontend
- * allwinner,sun9i-a80-display-frontend
- - reg: base address and size of the memory-mapped region.
- - interrupts: interrupt associated to this IP
- - clocks: phandles to the clocks feeding the frontend and backend
- * ahb: the backend interface clock
- * mod: the backend module clock
- * ram: the backend DRAM clock
- - clock-names: the clock names mentioned above
- - resets: phandles to the reset controllers driving the backend
-
-- ports: A ports node with endpoint definitions as defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt. The
- first port should be the input endpoints, the second one the outputs
-
-Display Engine 2.0 Mixer
-------------------------
-
-The DE2 mixer have many functionalities, currently only layer blending is
-supported.
-
-Required properties:
- - compatible: value must be one of:
- * allwinner,sun8i-a83t-de2-mixer-0
- * allwinner,sun8i-a83t-de2-mixer-1
- * allwinner,sun8i-h3-de2-mixer-0
- * allwinner,sun8i-r40-de2-mixer-0
- * allwinner,sun8i-r40-de2-mixer-1
- * allwinner,sun8i-v3s-de2-mixer
- * allwinner,sun50i-a64-de2-mixer-0
- * allwinner,sun50i-a64-de2-mixer-1
- * allwinner,sun50i-h6-de3-mixer-0
- - reg: base address and size of the memory-mapped region.
- - clocks: phandles to the clocks feeding the mixer
- * bus: the mixer interface clock
- * mod: the mixer module clock
- - clock-names: the clock names mentioned above
- - resets: phandles to the reset controllers driving the mixer
-
-- ports: A ports node with endpoint definitions as defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt. The
- first port should be the input endpoints, the second one the output
-
-
-Display Engine Pipeline
------------------------
-
-The display engine pipeline (and its entry point, since it can be
-either directly the backend or the frontend) is represented as an
-extra node.
-
-Required properties:
- - compatible: value must be one of:
- * allwinner,sun4i-a10-display-engine
- * allwinner,sun5i-a10s-display-engine
- * allwinner,sun5i-a13-display-engine
- * allwinner,sun6i-a31-display-engine
- * allwinner,sun6i-a31s-display-engine
- * allwinner,sun7i-a20-display-engine
- * allwinner,sun8i-a23-display-engine
- * allwinner,sun8i-a33-display-engine
- * allwinner,sun8i-a83t-display-engine
- * allwinner,sun8i-h3-display-engine
- * allwinner,sun8i-r40-display-engine
- * allwinner,sun8i-v3s-display-engine
- * allwinner,sun9i-a80-display-engine
- * allwinner,sun50i-a64-display-engine
- * allwinner,sun50i-h6-display-engine
-
- - allwinner,pipelines: list of phandle to the display engine
- frontends (DE 1.0) or mixers (DE 2.0/3.0) available.
-
-Example:
-
-panel: panel {
- compatible = "olimex,lcd-olinuxino-43-ts";
- #address-cells = <1>;
- #size-cells = <0>;
-
- port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- panel_input: endpoint {
- remote-endpoint = <&tcon0_out_panel>;
- };
- };
-};
-
-connector {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_con_in: endpoint {
- remote-endpoint = <&hdmi_out_con>;
- };
- };
-};
-
-hdmi: hdmi@1c16000 {
- compatible = "allwinner,sun5i-a10s-hdmi";
- reg = <0x01c16000 0x1000>;
- interrupts = <58>;
- clocks = <&ccu CLK_AHB_HDMI>, <&ccu CLK_HDMI>,
- <&ccu CLK_PLL_VIDEO0_2X>,
- <&ccu CLK_PLL_VIDEO1_2X>;
- clock-names = "ahb", "mod", "pll-0", "pll-1";
- dmas = <&dma SUN4I_DMA_NORMAL 16>,
- <&dma SUN4I_DMA_NORMAL 16>,
- <&dma SUN4I_DMA_DEDICATED 24>;
- dma-names = "ddc-tx", "ddc-rx", "audio-tx";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- hdmi_in_tcon0: endpoint {
- remote-endpoint = <&tcon0_out_hdmi>;
- };
- };
-
- port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
-
- hdmi_out_con: endpoint {
- remote-endpoint = <&hdmi_con_in>;
- };
- };
- };
-};
-
-tve0: tv-encoder@1c0a000 {
- compatible = "allwinner,sun4i-a10-tv-encoder";
- reg = <0x01c0a000 0x1000>;
- clocks = <&ahb_gates 34>;
- resets = <&tcon_ch0_clk 0>;
-
- port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- tve0_in_tcon0: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&tcon0_out_tve0>;
- };
- };
-};
-
-tcon0: lcd-controller@1c0c000 {
- compatible = "allwinner,sun5i-a13-tcon";
- reg = <0x01c0c000 0x1000>;
- interrupts = <44>;
- resets = <&tcon_ch0_clk 1>;
- reset-names = "lcd";
- clocks = <&ahb_gates 36>,
- <&tcon_ch0_clk>,
- <&tcon_ch1_clk>;
- clock-names = "ahb",
- "tcon-ch0",
- "tcon-ch1";
- clock-output-names = "tcon-pixel-clock";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- tcon0_in: port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- tcon0_in_be0: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&be0_out_tcon0>;
- };
- };
-
- tcon0_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
-
- tcon0_out_panel: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&panel_input>;
- };
-
- tcon0_out_tve0: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&tve0_in_tcon0>;
- };
- };
- };
-};
-
-fe0: display-frontend@1e00000 {
- compatible = "allwinner,sun5i-a13-display-frontend";
- reg = <0x01e00000 0x20000>;
- interrupts = <47>;
- clocks = <&ahb_gates 46>, <&de_fe_clk>,
- <&dram_gates 25>;
- clock-names = "ahb", "mod",
- "ram";
- resets = <&de_fe_clk>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- fe0_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
-
- fe0_out_be0: endpoint {
- remote-endpoint = <&be0_in_fe0>;
- };
- };
- };
-};
-
-be0: display-backend@1e60000 {
- compatible = "allwinner,sun5i-a13-display-backend";
- reg = <0x01e60000 0x10000>;
- interrupts = <47>;
- clocks = <&ahb_gates 44>, <&de_be_clk>,
- <&dram_gates 26>;
- clock-names = "ahb", "mod",
- "ram";
- resets = <&de_be_clk>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- be0_in: port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- be0_in_fe0: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&fe0_out_be0>;
- };
- };
-
- be0_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
-
- be0_out_tcon0: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&tcon0_in_be0>;
- };
- };
- };
-};
-
-display-engine {
- compatible = "allwinner,sun5i-a13-display-engine";
- allwinner,pipelines = <&fe0>;
-};
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-17 14:54:50 +0300