diff options
Diffstat (limited to 'Documentation/RCU/stallwarn.txt')
| -rw-r--r-- | Documentation/RCU/stallwarn.txt | 182 |
1 files changed, 105 insertions, 77 deletions
diff --git a/Documentation/RCU/stallwarn.txt b/Documentation/RCU/stallwarn.txt index 238acbd94917..a08f928c8557 100644 --- a/Documentation/RCU/stallwarn.txt +++ b/Documentation/RCU/stallwarn.txt @@ -171,67 +171,32 @@ Interpreting RCU's CPU Stall-Detector "Splats" For non-RCU-tasks flavors of RCU, when a CPU detects that it is stalling, it will print a message similar to the following: -INFO: rcu_sched_state detected stall on CPU 5 (t=2500 jiffies) + INFO: rcu_sched detected stalls on CPUs/tasks: + 2-...: (3 GPs behind) idle=06c/0/0 softirq=1453/1455 fqs=0 + 16-...: (0 ticks this GP) idle=81c/0/0 softirq=764/764 fqs=0 + (detected by 32, t=2603 jiffies, g=7073, c=7072, q=625) -This message indicates that CPU 5 detected that it was causing a stall, -and that the stall was affecting RCU-sched. This message will normally be -followed by a stack dump of the offending CPU. On TREE_RCU kernel builds, -RCU and RCU-sched are implemented by the same underlying mechanism, -while on PREEMPT_RCU kernel builds, RCU is instead implemented -by rcu_preempt_state. - -On the other hand, if the offending CPU fails to print out a stall-warning -message quickly enough, some other CPU will print a message similar to -the following: - -INFO: rcu_bh_state detected stalls on CPUs/tasks: { 3 5 } (detected by 2, 2502 jiffies) - -This message indicates that CPU 2 detected that CPUs 3 and 5 were both -causing stalls, and that the stall was affecting RCU-bh. This message +This message indicates that CPU 32 detected that CPUs 2 and 16 were both +causing stalls, and that the stall was affecting RCU-sched. This message will normally be followed by stack dumps for each CPU. Please note that -PREEMPT_RCU builds can be stalled by tasks as well as by CPUs, -and that the tasks will be indicated by PID, for example, "P3421". -It is even possible for a rcu_preempt_state stall to be caused by both -CPUs -and- tasks, in which case the offending CPUs and tasks will all -be called out in the list. - -Finally, if the grace period ends just as the stall warning starts -printing, there will be a spurious stall-warning message: - -INFO: rcu_bh_state detected stalls on CPUs/tasks: { } (detected by 4, 2502 jiffies) - -This is rare, but does happen from time to time in real life. It is also -possible for a zero-jiffy stall to be flagged in this case, depending -on how the stall warning and the grace-period initialization happen to -interact. Please note that it is not possible to entirely eliminate this -sort of false positive without resorting to things like stop_machine(), -which is overkill for this sort of problem. - -Recent kernels will print a long form of the stall-warning message: - - INFO: rcu_preempt detected stall on CPU - 0: (63959 ticks this GP) idle=241/3fffffffffffffff/0 softirq=82/543 - (t=65000 jiffies) - -In kernels with CONFIG_RCU_FAST_NO_HZ, more information is printed: - - INFO: rcu_preempt detected stall on CPU - 0: (64628 ticks this GP) idle=dd5/3fffffffffffffff/0 softirq=82/543 last_accelerate: a345/d342 nonlazy_posted: 25 .D - (t=65000 jiffies) +PREEMPT_RCU builds can be stalled by tasks as well as by CPUs, and that +the tasks will be indicated by PID, for example, "P3421". It is even +possible for a rcu_preempt_state stall to be caused by both CPUs -and- +tasks, in which case the offending CPUs and tasks will all be called +out in the list. -The "(64628 ticks this GP)" indicates that this CPU has taken more -than 64,000 scheduling-clock interrupts during the current stalled -grace period. If the CPU was not yet aware of the current grace -period (for example, if it was offline), then this part of the message -indicates how many grace periods behind the CPU is. +CPU 2's "(3 GPs behind)" indicates that this CPU has not interacted with +the RCU core for the past three grace periods. In contrast, CPU 16's "(0 +ticks this GP)" indicates that this CPU has not taken any scheduling-clock +interrupts during the current stalled grace period. The "idle=" portion of the message prints the dyntick-idle state. The hex number before the first "/" is the low-order 12 bits of the -dynticks counter, which will have an even-numbered value if the CPU is -in dyntick-idle mode and an odd-numbered value otherwise. The hex -number between the two "/"s is the value of the nesting, which will -be a small positive number if in the idle loop and a very large positive -number (as shown above) otherwise. +dynticks counter, which will have an even-numbered value if the CPU +is in dyntick-idle mode and an odd-numbered value otherwise. The hex +number between the two "/"s is the value of the nesting, which will be +a small non-negative number if in the idle loop (as shown above) and a +very large positive number otherwise. The "softirq=" portion of the message tracks the number of RCU softirq handlers that the stalled CPU has executed. The number before the "/" @@ -246,24 +211,72 @@ handlers are no longer able to execute on this CPU. This can happen if the stalled CPU is spinning with interrupts are disabled, or, in -rt kernels, if a high-priority process is starving RCU's softirq handler. -For CONFIG_RCU_FAST_NO_HZ kernels, the "last_accelerate:" prints the -low-order 16 bits (in hex) of the jiffies counter when this CPU last -invoked rcu_try_advance_all_cbs() from rcu_needs_cpu() or last invoked -rcu_accelerate_cbs() from rcu_prepare_for_idle(). The "nonlazy_posted:" -prints the number of non-lazy callbacks posted since the last call to -rcu_needs_cpu(). Finally, an "L" indicates that there are currently -no non-lazy callbacks ("." is printed otherwise, as shown above) and -"D" indicates that dyntick-idle processing is enabled ("." is printed -otherwise, for example, if disabled via the "nohz=" kernel boot parameter). +The "fps=" shows the number of force-quiescent-state idle/offline +detection passes that the grace-period kthread has made across this +CPU since the last time that this CPU noted the beginning of a grace +period. + +The "detected by" line indicates which CPU detected the stall (in this +case, CPU 32), how many jiffies have elapsed since the start of the +grace period (in this case 2603), the number of the last grace period +to start and to complete (7073 and 7072, respectively), and an estimate +of the total number of RCU callbacks queued across all CPUs (625 in +this case). + +In kernels with CONFIG_RCU_FAST_NO_HZ, more information is printed +for each CPU: + + 0: (64628 ticks this GP) idle=dd5/3fffffffffffffff/0 softirq=82/543 last_accelerate: a345/d342 nonlazy_posted: 25 .D + +The "last_accelerate:" prints the low-order 16 bits (in hex) of the +jiffies counter when this CPU last invoked rcu_try_advance_all_cbs() +from rcu_needs_cpu() or last invoked rcu_accelerate_cbs() from +rcu_prepare_for_idle(). The "nonlazy_posted:" prints the number +of non-lazy callbacks posted since the last call to rcu_needs_cpu(). +Finally, an "L" indicates that there are currently no non-lazy callbacks +("." is printed otherwise, as shown above) and "D" indicates that +dyntick-idle processing is enabled ("." is printed otherwise, for example, +if disabled via the "nohz=" kernel boot parameter). + +If the grace period ends just as the stall warning starts printing, +there will be a spurious stall-warning message, which will include +the following: + + INFO: Stall ended before state dump start + +This is rare, but does happen from time to time in real life. It is also +possible for a zero-jiffy stall to be flagged in this case, depending +on how the stall warning and the grace-period initialization happen to +interact. Please note that it is not possible to entirely eliminate this +sort of false positive without resorting to things like stop_machine(), +which is overkill for this sort of problem. + +If all CPUs and tasks have passed through quiescent states, but the +grace period has nevertheless failed to end, the stall-warning splat +will include something like the following: + + All QSes seen, last rcu_preempt kthread activity 23807 (4297905177-4297881370), jiffies_till_next_fqs=3, root ->qsmask 0x0 + +The "23807" indicates that it has been more than 23 thousand jiffies +since the grace-period kthread ran. The "jiffies_till_next_fqs" +indicates how frequently that kthread should run, giving the number +of jiffies between force-quiescent-state scans, in this case three, +which is way less than 23807. Finally, the root rcu_node structure's +->qsmask field is printed, which will normally be zero. If the relevant grace-period kthread has been unable to run prior to -the stall warning, the following additional line is printed: +the stall warning, as was the case in the "All QSes seen" line above, +the following additional line is printed: - rcu_preempt kthread starved for 2023 jiffies! + kthread starved for 23807 jiffies! g7073 c7072 f0x0 RCU_GP_WAIT_FQS(3) ->state=0x1 -Starving the grace-period kthreads of CPU time can of course result in -RCU CPU stall warnings even when all CPUs and tasks have passed through -the required quiescent states. +Starving the grace-period kthreads of CPU time can of course result +in RCU CPU stall warnings even when all CPUs and tasks have passed +through the required quiescent states. The "g" and "c" numbers flag the +number of the last grace period started and completed, respectively, +the "f" precedes the ->gp_flags command to the grace-period kthread, +the "RCU_GP_WAIT_FQS" indicates that the kthread is waiting for a short +timeout, and the "state" precedes value of the task_struct ->state field. Multiple Warnings From One Stall @@ -280,13 +293,28 @@ Stall Warnings for Expedited Grace Periods If an expedited grace period detects a stall, it will place a message like the following in dmesg: - INFO: rcu_sched detected expedited stalls on CPUs: { 1 2 6 } 26009 jiffies s: 1043 - -This indicates that CPUs 1, 2, and 6 have failed to respond to a -reschedule IPI, that the expedited grace period has been going on for -26,009 jiffies, and that the expedited grace-period sequence counter is -1043. The fact that this last value is odd indicates that an expedited -grace period is in flight. + INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 7-... } 21119 jiffies s: 73 root: 0x2/. + +This indicates that CPU 7 has failed to respond to a reschedule IPI. +The three periods (".") following the CPU number indicate that the CPU +is online (otherwise the first period would instead have been "O"), +that the CPU was online at the beginning of the expedited grace period +(otherwise the second period would have instead been "o"), and that +the CPU has been online at least once since boot (otherwise, the third +period would instead have been "N"). The number before the "jiffies" +indicates that the expedited grace period has been going on for 21,119 +jiffies. The number following the "s:" indicates that the expedited +grace-period sequence counter is 73. The fact that this last value is +odd indicates that an expedited grace period is in flight. The number +following "root:" is a bitmask that indicates which children of the root +rcu_node structure correspond to CPUs and/or tasks that are blocking the +current expedited grace period. If the tree had more than one level, +additional hex numbers would be printed for the states of the other +rcu_node structures in the tree. + +As with normal grace periods, PREEMPT_RCU builds can be stalled by +tasks as well as by CPUs, and that the tasks will be indicated by PID, +for example, "P3421". It is entirely possible to see stall warnings from normal and from -expedited grace periods at about the same time from the same run. +expedited grace periods at about the same time during the same run. |