diff options
| -rw-r--r-- | arch/arm64/boot/dts/qcom/monaco-evk.dts | 92 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/qcom/monaco.dtsi | 6 |
2 files changed, 98 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/monaco-evk.dts b/arch/arm64/boot/dts/qcom/monaco-evk.dts index fb687309decd..3858872e97d9 100644 --- a/arch/arm64/boot/dts/qcom/monaco-evk.dts +++ b/arch/arm64/boot/dts/qcom/monaco-evk.dts @@ -57,6 +57,30 @@ #sound-dai-cells = <0>; }; + dp-connector-0 { + compatible = "dp-connector"; + label = "DP0"; + type = "mini"; + + port { + dp0_connector_in: endpoint { + remote-endpoint = <<8713sx_dp0_out>; + }; + }; + }; + + dp-connector-1 { + compatible = "dp-connector"; + label = "DP1"; + type = "mini"; + + port { + dp1_connector_in: endpoint { + remote-endpoint = <<8713sx_dp1_out>; + }; + }; + }; + usb2_vbus: regulator-usb2-vbus { compatible = "regulator-fixed"; regulator-name = "usb2_vbus"; @@ -397,6 +421,45 @@ firmware-name = "qcom/qcs8300/a623_zap.mbn"; }; +&i2c0 { + status = "okay"; + + bridge@4f { + compatible = "lontium,lt8713sx"; + reg = <0x4f>; + reset-gpios = <&expander5 6 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lt8713sx_dp_in: endpoint { + remote-endpoint = <&mdss_dp0_out>; + }; + }; + + port@1 { + reg = <1>; + + lt8713sx_dp0_out: endpoint { + remote-endpoint = <&dp0_connector_in>; + }; + }; + + port@2 { + reg = <2>; + + lt8713sx_dp1_out: endpoint { + remote-endpoint = <&dp1_connector_in>; + }; + }; + }; + }; +}; + &i2c1 { pinctrl-0 = <&qup_i2c1_default>; pinctrl-names = "default"; @@ -525,6 +588,30 @@ status = "okay"; }; +&mdss { + status = "okay"; +}; + +&mdss_dp0 { + pinctrl-0 = <&dp_hot_plug_det>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&mdss_dp0_out { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + remote-endpoint = <<8713sx_dp_in>; +}; + +&mdss_dp0_phy { + vdda-phy-supply = <&vreg_l5a>; + vdda-pll-supply = <&vreg_l4a>; + + status = "okay"; +}; + &pcie0 { pinctrl-0 = <&pcie0_default_state>; pinctrl-names = "default"; @@ -573,6 +660,11 @@ }; }; +&qup_i2c0_data_clk { + drive-strength = <2>; + bias-pull-up; +}; + &qupv3_id_0 { firmware-name = "qcom/qcs8300/qupv3fw.elf"; status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/monaco.dtsi b/arch/arm64/boot/dts/qcom/monaco.dtsi index 3b00b81aeaf1..de528b4615f8 100644 --- a/arch/arm64/boot/dts/qcom/monaco.dtsi +++ b/arch/arm64/boot/dts/qcom/monaco.dtsi @@ -6418,6 +6418,12 @@ }; }; + dp_hot_plug_det: dp-hot-plug-det-state { + pins = "gpio94"; + function = "edp0_hot"; + bias-disable; + }; + hs0_mi2s_active: hs0-mi2s-active-state { pins = "gpio106", "gpio107", "gpio108", "gpio109"; function = "hs0_mi2s"; |