diff options
| -rw-r--r-- | drivers/mtd/nand/spi/winbond.c | 108 |
1 files changed, 98 insertions, 10 deletions
diff --git a/drivers/mtd/nand/spi/winbond.c b/drivers/mtd/nand/spi/winbond.c index a73a35adbf08..9b78c1e6cbc9 100644 --- a/drivers/mtd/nand/spi/winbond.c +++ b/drivers/mtd/nand/spi/winbond.c @@ -46,6 +46,62 @@ SPI_MEM_OP_DATA_IN(len, buf, 1), \ SPI_MEM_OP_MAX_FREQ(freq)) +#define WINBOND_CONT_READ_FROM_CACHE_1S_1D_1D_OP(ndummy, buf, len, freq) \ + SPI_MEM_OP(SPI_MEM_OP_CMD(0x0d, 1), \ + SPI_MEM_DTR_OP_ADDR(2, 0, 1), \ + SPI_MEM_DTR_OP_DUMMY(ndummy, 1), \ + SPI_MEM_DTR_OP_DATA_IN(len, buf, 1), \ + SPI_MEM_OP_MAX_FREQ(freq)) + +#define WINBOND_CONT_READ_FROM_CACHE_1S_1S_2S_OP(ndummy, buf, len, freq) \ + SPI_MEM_OP(SPI_MEM_OP_CMD(0x3b, 1), \ + SPI_MEM_OP_ADDR(1, 0, 1), \ + SPI_MEM_OP_DUMMY(ndummy - 1, 1), \ + SPI_MEM_OP_DATA_IN(len, buf, 2), \ + SPI_MEM_OP_MAX_FREQ(freq)) + +#define WINBOND_CONT_READ_FROM_CACHE_1S_2S_2S_OP(ndummy, buf, len, freq) \ + SPI_MEM_OP(SPI_MEM_OP_CMD(0xbb, 1), \ + SPI_MEM_OP_ADDR(1, 0, 2), \ + SPI_MEM_OP_DUMMY(ndummy - 1, 2), \ + SPI_MEM_OP_DATA_IN(len, buf, 2), \ + SPI_MEM_OP_MAX_FREQ(freq)) + +#define WINBOND_CONT_READ_FROM_CACHE_1S_2D_2D_OP(ndummy, buf, len, freq) \ + SPI_MEM_OP(SPI_MEM_OP_CMD(0xbd, 1), \ + SPI_MEM_DTR_OP_ADDR(1, 0, 2), \ + SPI_MEM_DTR_OP_DUMMY(ndummy - 1, 2), \ + SPI_MEM_DTR_OP_DATA_IN(len, buf, 2), \ + SPI_MEM_OP_MAX_FREQ(freq)) + +#define WINBOND_CONT_READ_FROM_CACHE_1S_1S_4S_OP(ndummy, buf, len, freq) \ + SPI_MEM_OP(SPI_MEM_OP_CMD(0x6b, 1), \ + SPI_MEM_OP_ADDR(1, 0, 1), \ + SPI_MEM_OP_DUMMY(ndummy - 1, 1), \ + SPI_MEM_OP_DATA_IN(len, buf, 4), \ + SPI_MEM_OP_MAX_FREQ(freq)) + +#define WINBOND_CONT_READ_FROM_CACHE_1S_1D_4D_OP(ndummy, buf, len, freq) \ + SPI_MEM_OP(SPI_MEM_OP_CMD(0x6d, 1), \ + SPI_MEM_DTR_OP_ADDR(1, 0, 1), \ + SPI_MEM_DTR_OP_DUMMY(ndummy - 1, 1), \ + SPI_MEM_DTR_OP_DATA_IN(len, buf, 4), \ + SPI_MEM_OP_MAX_FREQ(freq)) + +#define WINBOND_CONT_READ_FROM_CACHE_1S_4S_4S_OP(ndummy, buf, len, freq) \ + SPI_MEM_OP(SPI_MEM_OP_CMD(0xeb, 1), \ + SPI_MEM_OP_ADDR(1, 0, 4), \ + SPI_MEM_OP_DUMMY(ndummy - 1, 4), \ + SPI_MEM_OP_DATA_IN(len, buf, 4), \ + SPI_MEM_OP_MAX_FREQ(freq)) + +#define WINBOND_CONT_READ_FROM_CACHE_1S_4D_4D_OP(ndummy, buf, len, freq) \ + SPI_MEM_OP(SPI_MEM_OP_CMD(0xed, 1), \ + SPI_MEM_DTR_OP_ADDR(1, 0, 4), \ + SPI_MEM_DTR_OP_DUMMY(ndummy - 1, 4), \ + SPI_MEM_DTR_OP_DATA_IN(len, buf, 4), \ + SPI_MEM_OP_MAX_FREQ(freq)) + #define WINBOND_CONT_READ_FROM_CACHE_1S_1S_8S_OP(ndummy, buf, len, freq) \ SPI_MEM_OP(SPI_MEM_OP_CMD(0x8b, 1), \ SPI_MEM_OP_ADDR(1, 0, 1), \ @@ -133,6 +189,20 @@ static SPINAND_OP_VARIANTS(read_cache_dual_quad_dtr_variants, SPINAND_PAGE_READ_FROM_CACHE_FAST_1S_1S_1S_OP(0, 1, NULL, 0, 0), SPINAND_PAGE_READ_FROM_CACHE_1S_1S_1S_OP(0, 1, NULL, 0, 54 * HZ_PER_MHZ)); +static SPINAND_OP_VARIANTS(cont_read_cache_dual_quad_dtr_variants, + WINBOND_CONT_READ_FROM_CACHE_1S_4D_4D_OP(11, NULL, 0, 80 * HZ_PER_MHZ), + WINBOND_CONT_READ_FROM_CACHE_1S_1D_4D_OP(5, NULL, 0, 80 * HZ_PER_MHZ), + WINBOND_CONT_READ_FROM_CACHE_1S_4S_4S_OP(7, NULL, 0, 0), + WINBOND_CONT_READ_FROM_CACHE_1S_4S_4S_OP(6, NULL, 0, 104 * HZ_PER_MHZ), + WINBOND_CONT_READ_FROM_CACHE_1S_1S_4S_OP(4, NULL, 0, 0), + WINBOND_CONT_READ_FROM_CACHE_1S_2D_2D_OP(6, NULL, 0, 80 * HZ_PER_MHZ), + /* The 1S_1D_2D variant would require 4.5 dummy bytes, this is not possible */ + WINBOND_CONT_READ_FROM_CACHE_1S_2S_2S_OP(5, NULL, 0, 0), + WINBOND_CONT_READ_FROM_CACHE_1S_2S_2S_OP(4, NULL, 0, 104 * HZ_PER_MHZ), + WINBOND_CONT_READ_FROM_CACHE_1S_1S_2S_OP(4, NULL, 0, 0), + /* The 1S_1D_1D variant would require 4.5 dummy bytes, this is not possible */ + WINBOND_CONT_READ_FROM_CACHE_FAST_1S_1S_1S_OP(4, NULL, 0, 0)); + static SPINAND_OP_VARIANTS(read_cache_variants, SPINAND_PAGE_READ_FROM_CACHE_1S_4S_4S_OP(0, 2, NULL, 0, 0), SPINAND_PAGE_READ_FROM_CACHE_1S_1S_4S_OP(0, 1, NULL, 0, 0), @@ -445,11 +515,25 @@ static int w25n0xjw_hs_cfg(struct spinand_device *spinand, if (iface != SSDR) return -EOPNOTSUPP; + /* + * At this stage, we do not yet know the continuous read template, nor + * if there is going to be one. Let's assume the continuous read + * template will be selected with the same heuristics as the buffered + * read variant, as there cannot be a HS configuration mismatch between + * them. + */ op = spinand->op_templates->read_cache; return w25n0xjw_set_sr4_hs(spinand, w25n0xjw_op_needs_hs(op)); } +static int w25n0xjw_set_cont_read(struct spinand_device *spinand, bool enable) +{ + u8 mask = enable ? 0 : WINBOND_CFG_BUF_READ; + + return spinand_upd_cfg(spinand, WINBOND_CFG_BUF_READ, mask); +} + static int w35n0xjw_write_vcr(struct spinand_device *spinand, u8 reg, u8 val) { struct spi_mem_op op = SPINAND_OP(spinand, winbond_write_vcr, @@ -580,12 +664,14 @@ static const struct spinand_info winbond_spinand_table[] = { SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xbc, 0x21), NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1), NAND_ECCREQ(1, 512), - SPINAND_INFO_OP_VARIANTS(&read_cache_dual_quad_dtr_variants, - &write_cache_variants, - &update_cache_variants), + SPINAND_INFO_OP_VARIANTS_WITH_CONT(&read_cache_dual_quad_dtr_variants, + &write_cache_variants, + &update_cache_variants, + &cont_read_cache_dual_quad_dtr_variants), SPINAND_HAS_QE_BIT, - SPINAND_ECCINFO(&w25n01jw_ooblayout, NULL), - SPINAND_CONFIGURE_CHIP(w25n0xjw_hs_cfg)), + SPINAND_ECCINFO(&w25n01jw_ooblayout, w25w35nxxjw_ecc_get_status), + SPINAND_CONFIGURE_CHIP(w25n0xjw_hs_cfg), + SPINAND_CONT_READ(w25n0xjw_set_cont_read)), SPINAND_INFO("W25N01KV", /* 3.3V */ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xae, 0x21), NAND_MEMORG(1, 2048, 96, 64, 1024, 20, 1, 1, 1), @@ -624,12 +710,14 @@ static const struct spinand_info winbond_spinand_table[] = { SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xbf, 0x22), NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 2, 1), NAND_ECCREQ(1, 512), - SPINAND_INFO_OP_VARIANTS(&read_cache_dual_quad_dtr_variants, - &write_cache_variants, - &update_cache_variants), + SPINAND_INFO_OP_VARIANTS_WITH_CONT(&read_cache_dual_quad_dtr_variants, + &write_cache_variants, + &update_cache_variants, + &cont_read_cache_dual_quad_dtr_variants), SPINAND_HAS_QE_BIT, - SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL), - SPINAND_CONFIGURE_CHIP(w25n0xjw_hs_cfg)), + SPINAND_ECCINFO(&w25m02gv_ooblayout, w25w35nxxjw_ecc_get_status), + SPINAND_CONFIGURE_CHIP(w25n0xjw_hs_cfg), + SPINAND_CONT_READ(w25n0xjw_set_cont_read)), SPINAND_INFO("W25N02KV", /* 3.3V */ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xaa, 0x22), NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1), |