diff options
| -rw-r--r-- | drivers/nfc/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/nfc/trf7970a.c | 61 |
2 files changed, 26 insertions, 37 deletions
diff --git a/drivers/nfc/Kconfig b/drivers/nfc/Kconfig index c4208487fadc..b065eb605215 100644 --- a/drivers/nfc/Kconfig +++ b/drivers/nfc/Kconfig @@ -7,7 +7,7 @@ menu "Near Field Communication (NFC) devices" config NFC_TRF7970A tristate "Texas Instruments TRF7970a NFC driver" - depends on SPI && NFC_DIGITAL + depends on SPI && NFC_DIGITAL && GPIOLIB help This option enables the NFC driver for Texas Instruments' TRF7970a device. Such device supports 5 different protocols: ISO14443A, diff --git a/drivers/nfc/trf7970a.c b/drivers/nfc/trf7970a.c index 5827ad111942..bb777f50b4fb 100644 --- a/drivers/nfc/trf7970a.c +++ b/drivers/nfc/trf7970a.c @@ -20,9 +20,8 @@ #include <linux/nfc.h> #include <linux/skbuff.h> #include <linux/delay.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/of.h> -#include <linux/of_gpio.h> #include <linux/spi/spi.h> #include <linux/regulator/consumer.h> @@ -452,8 +451,8 @@ struct trf7970a { u8 tx_cmd; bool issue_eof; bool adjust_resp_len; - int en2_gpio; - int en_gpio; + struct gpio_desc *en_gpiod; + struct gpio_desc *en2_gpiod; struct mutex lock; unsigned int timeout; bool ignore_timeout; @@ -1908,14 +1907,13 @@ static int trf7970a_power_up(struct trf7970a *trf) usleep_range(5000, 6000); - if (!(trf->quirks & TRF7970A_QUIRK_EN2_MUST_STAY_LOW)) { - if (gpio_is_valid(trf->en2_gpio)) { - gpio_set_value(trf->en2_gpio, 1); - usleep_range(1000, 2000); - } + if (trf->en2_gpiod && + !(trf->quirks & TRF7970A_QUIRK_EN2_MUST_STAY_LOW)) { + gpiod_set_value_cansleep(trf->en2_gpiod, 1); + usleep_range(1000, 2000); } - gpio_set_value(trf->en_gpio, 1); + gpiod_set_value_cansleep(trf->en_gpiod, 1); usleep_range(20000, 21000); @@ -1939,11 +1937,11 @@ static int trf7970a_power_down(struct trf7970a *trf) return -EBUSY; } - gpio_set_value(trf->en_gpio, 0); + gpiod_set_value_cansleep(trf->en_gpiod, 0); - if (!(trf->quirks & TRF7970A_QUIRK_EN2_MUST_STAY_LOW)) - if (gpio_is_valid(trf->en2_gpio)) - gpio_set_value(trf->en2_gpio, 0); + if (trf->en2_gpiod && + !(trf->quirks & TRF7970A_QUIRK_EN2_MUST_STAY_LOW)) + gpiod_set_value_cansleep(trf->en2_gpiod, 0); ret = regulator_disable(trf->regulator); if (ret) @@ -2041,32 +2039,23 @@ static int trf7970a_probe(struct spi_device *spi) trf->quirks |= TRF7970A_QUIRK_IRQ_STATUS_READ; /* There are two enable pins - only EN must be present in the DT */ - trf->en_gpio = of_get_named_gpio(np, "ti,enable-gpios", 0); - if (!gpio_is_valid(trf->en_gpio)) { + trf->en_gpiod = devm_gpiod_get_index(trf->dev, "ti,enable", 0, + GPIOD_OUT_LOW); + if (IS_ERR(trf->en_gpiod)) { dev_err(trf->dev, "No EN GPIO property\n"); - return trf->en_gpio; - } - - ret = devm_gpio_request_one(trf->dev, trf->en_gpio, - GPIOF_DIR_OUT | GPIOF_INIT_LOW, "trf7970a EN"); - if (ret) { - dev_err(trf->dev, "Can't request EN GPIO: %d\n", ret); - return ret; + return PTR_ERR(trf->en_gpiod); } - trf->en2_gpio = of_get_named_gpio(np, "ti,enable-gpios", 1); - if (!gpio_is_valid(trf->en2_gpio)) { + trf->en2_gpiod = devm_gpiod_get_index_optional(trf->dev, "ti,enable", 1, + GPIOD_OUT_LOW); + if (!trf->en2_gpiod) { dev_info(trf->dev, "No EN2 GPIO property\n"); - } else { - ret = devm_gpio_request_one(trf->dev, trf->en2_gpio, - GPIOF_DIR_OUT | GPIOF_INIT_LOW, "trf7970a EN2"); - if (ret) { - dev_err(trf->dev, "Can't request EN2 GPIO: %d\n", ret); - return ret; - } - - if (of_property_read_bool(np, "en2-rf-quirk")) - trf->quirks |= TRF7970A_QUIRK_EN2_MUST_STAY_LOW; + } else if (IS_ERR(trf->en2_gpiod)) { + dev_err(trf->dev, "Error getting EN2 GPIO property: %ld\n", + PTR_ERR(trf->en2_gpiod)); + return PTR_ERR(trf->en2_gpiod); + } else if (of_property_read_bool(np, "en2-rf-quirk")) { + trf->quirks |= TRF7970A_QUIRK_EN2_MUST_STAY_LOW; } of_property_read_u32(np, "clock-frequency", &clk_freq); |