diff options
| -rw-r--r-- | drivers/phy/samsung/phy-exynos5-usbdrd.c | 227 | ||||
| -rw-r--r-- | include/linux/soc/samsung/exynos-regs-pmu.h | 3 |
2 files changed, 215 insertions, 15 deletions
diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c index 6cbe563a7bd0..917a76d584f0 100644 --- a/drivers/phy/samsung/phy-exynos5-usbdrd.c +++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c @@ -36,6 +36,21 @@ #define EXYNOS5_FSEL_26MHZ 0x6 #define EXYNOS5_FSEL_50MHZ 0x7 +/* USB 3.2 DRD 4nm PHY link controller registers */ +#define EXYNOS2200_DRD_CLKRST 0x0c +#define EXYNOS2200_CLKRST_LINK_PCLK_SEL BIT(1) + +#define EXYNOS2200_DRD_UTMI 0x10 +#define EXYNOS2200_UTMI_FORCE_VBUSVALID BIT(1) +#define EXYNOS2200_UTMI_FORCE_BVALID BIT(0) + +#define EXYNOS2200_DRD_HSP_MISC 0x114 +#define HSP_MISC_SET_REQ_IN2 BIT(4) +#define HSP_MISC_RES_TUNE GENMASK(1, 0) +#define RES_TUNE_PHY1_PHY2 0x1 +#define RES_TUNE_PHY1 0x2 +#define RES_TUNE_PHY2 0x3 + /* Exynos5: USB 3.0 DRD PHY registers */ #define EXYNOS5_DRD_LINKSYSTEM 0x04 #define LINKSYSTEM_XHCI_VERSION_CONTROL BIT(27) @@ -431,6 +446,7 @@ struct exynos5_usbdrd_phy_drvdata { * @clks: clocks for register access * @core_clks: core clocks for phy (ref, pipe3, utmi+, ITP, etc. as required) * @drv_data: pointer to SoC level driver data structure + * @hs_phy: pointer to non-Samsung IP high-speed phy controller * @phy_mutex: mutex protecting phy_init/exit & TCPC callbacks * @phys: array for 'EXYNOS5_DRDPHYS_NUM' number of PHY * instances each with its 'phy' and 'phy_cfg'. @@ -448,6 +464,7 @@ struct exynos5_usbdrd_phy { struct clk_bulk_data *clks; struct clk_bulk_data *core_clks; const struct exynos5_usbdrd_phy_drvdata *drv_data; + struct phy *hs_phy; struct mutex phy_mutex; struct phy_usb_instance { struct phy *phy; @@ -1285,6 +1302,149 @@ static const struct phy_ops exynos7870_usbdrd_phy_ops = { .owner = THIS_MODULE, }; +static void exynos2200_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd) +{ + /* Configure non-Samsung IP PHY, responsible for UTMI */ + phy_init(phy_drd->hs_phy); +} + +static void exynos2200_usbdrd_link_init(struct exynos5_usbdrd_phy *phy_drd) +{ + void __iomem *regs_base = phy_drd->reg_phy; + u32 reg; + + /* + * Disable HWACG (hardware auto clock gating control). This will force + * QACTIVE signal in Q-Channel interface to HIGH level, to make sure + * the PHY clock is not gated by the hardware. + */ + reg = readl(regs_base + EXYNOS850_DRD_LINKCTRL); + reg |= LINKCTRL_FORCE_QACT; + writel(reg, regs_base + EXYNOS850_DRD_LINKCTRL); + + /* De-assert link reset */ + reg = readl(regs_base + EXYNOS2200_DRD_CLKRST); + reg &= ~CLKRST_LINK_SW_RST; + writel(reg, regs_base + EXYNOS2200_DRD_CLKRST); + + /* Set link VBUS Valid */ + reg = readl(regs_base + EXYNOS2200_DRD_UTMI); + reg |= EXYNOS2200_UTMI_FORCE_BVALID | EXYNOS2200_UTMI_FORCE_VBUSVALID; + writel(reg, regs_base + EXYNOS2200_DRD_UTMI); +} + +static void +exynos2200_usbdrd_link_attach_detach_pipe3_phy(struct phy_usb_instance *inst) +{ + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + void __iomem *regs_base = phy_drd->reg_phy; + u32 reg; + + reg = readl(regs_base + EXYNOS850_DRD_LINKCTRL); + if (inst->phy_cfg->id == EXYNOS5_DRDPHY_UTMI) { + /* force pipe3 signal for link */ + reg &= ~LINKCTRL_FORCE_PHYSTATUS; + reg |= LINKCTRL_FORCE_PIPE_EN | LINKCTRL_FORCE_RXELECIDLE; + } else { + /* disable forcing pipe interface */ + reg &= ~LINKCTRL_FORCE_PIPE_EN; + } + writel(reg, regs_base + EXYNOS850_DRD_LINKCTRL); + + reg = readl(regs_base + EXYNOS2200_DRD_HSP_MISC); + if (inst->phy_cfg->id == EXYNOS5_DRDPHY_UTMI) { + /* calibrate only eUSB phy */ + reg |= FIELD_PREP(HSP_MISC_RES_TUNE, RES_TUNE_PHY1); + reg |= HSP_MISC_SET_REQ_IN2; + } else { + /* calibrate for dual phy */ + reg |= FIELD_PREP(HSP_MISC_RES_TUNE, RES_TUNE_PHY1_PHY2); + reg &= ~HSP_MISC_SET_REQ_IN2; + } + writel(reg, regs_base + EXYNOS2200_DRD_HSP_MISC); + + reg = readl(regs_base + EXYNOS2200_DRD_CLKRST); + if (inst->phy_cfg->id == EXYNOS5_DRDPHY_UTMI) + reg &= ~EXYNOS2200_CLKRST_LINK_PCLK_SEL; + else + reg |= EXYNOS2200_CLKRST_LINK_PCLK_SEL; + + writel(reg, regs_base + EXYNOS2200_DRD_CLKRST); +} + +static int exynos2200_usbdrd_phy_init(struct phy *phy) +{ + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + int ret; + + if (inst->phy_cfg->id == EXYNOS5_DRDPHY_UTMI) { + /* Power-on PHY ... */ + ret = regulator_bulk_enable(phy_drd->drv_data->n_regulators, + phy_drd->regulators); + if (ret) { + dev_err(phy_drd->dev, + "Failed to enable PHY regulator(s)\n"); + return ret; + } + } + /* + * ... and ungate power via PMU. Without this here, we get an SError + * trying to access PMA registers + */ + exynos5_usbdrd_phy_isol(inst, false); + + ret = clk_bulk_prepare_enable(phy_drd->drv_data->n_clks, phy_drd->clks); + if (ret) + return ret; + + /* Set up the link controller */ + exynos2200_usbdrd_link_init(phy_drd); + + /* UTMI or PIPE3 link preparation */ + exynos2200_usbdrd_link_attach_detach_pipe3_phy(inst); + + /* UTMI or PIPE3 specific init */ + inst->phy_cfg->phy_init(phy_drd); + + clk_bulk_disable_unprepare(phy_drd->drv_data->n_clks, phy_drd->clks); + + return 0; +} + +static int exynos2200_usbdrd_phy_exit(struct phy *phy) +{ + struct phy_usb_instance *inst = phy_get_drvdata(phy); + struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst); + void __iomem *regs_base = phy_drd->reg_phy; + u32 reg; + int ret; + + ret = clk_bulk_prepare_enable(phy_drd->drv_data->n_clks, phy_drd->clks); + if (ret) + return ret; + + reg = readl(regs_base + EXYNOS2200_DRD_UTMI); + reg &= ~(EXYNOS2200_UTMI_FORCE_BVALID | EXYNOS2200_UTMI_FORCE_VBUSVALID); + writel(reg, regs_base + EXYNOS2200_DRD_UTMI); + + reg = readl(regs_base + EXYNOS2200_DRD_CLKRST); + reg |= CLKRST_LINK_SW_RST; + writel(reg, regs_base + EXYNOS2200_DRD_CLKRST); + + clk_bulk_disable_unprepare(phy_drd->drv_data->n_clks, phy_drd->clks); + + exynos5_usbdrd_phy_isol(inst, true); + return regulator_bulk_disable(phy_drd->drv_data->n_regulators, + phy_drd->regulators); +} + +static const struct phy_ops exynos2200_usbdrd_phy_ops = { + .init = exynos2200_usbdrd_phy_init, + .exit = exynos2200_usbdrd_phy_exit, + .owner = THIS_MODULE, +}; + static void exynos5_usbdrd_usb_v3p1_pipe_override(struct exynos5_usbdrd_phy *phy_drd) { @@ -1594,27 +1754,37 @@ static int exynos5_usbdrd_phy_clk_handle(struct exynos5_usbdrd_phy *phy_drd) return dev_err_probe(phy_drd->dev, ret, "failed to get phy core clock(s)\n"); - ref_clk = NULL; - for (int i = 0; i < phy_drd->drv_data->n_core_clks; ++i) { - if (!strcmp(phy_drd->core_clks[i].id, "ref")) { - ref_clk = phy_drd->core_clks[i].clk; - break; + if (phy_drd->drv_data->n_core_clks) { + ref_clk = NULL; + for (int i = 0; i < phy_drd->drv_data->n_core_clks; ++i) { + if (!strcmp(phy_drd->core_clks[i].id, "ref")) { + ref_clk = phy_drd->core_clks[i].clk; + break; + } } - } - if (!ref_clk) - return dev_err_probe(phy_drd->dev, -ENODEV, - "failed to find phy reference clock\n"); + if (!ref_clk) + return dev_err_probe(phy_drd->dev, -ENODEV, + "failed to find phy reference clock\n"); - ref_rate = clk_get_rate(ref_clk); - ret = exynos5_rate_to_clk(ref_rate, &phy_drd->extrefclk); - if (ret) - return dev_err_probe(phy_drd->dev, ret, - "clock rate (%ld) not supported\n", - ref_rate); + ref_rate = clk_get_rate(ref_clk); + ret = exynos5_rate_to_clk(ref_rate, &phy_drd->extrefclk); + if (ret) + return dev_err_probe(phy_drd->dev, ret, + "clock rate (%ld) not supported\n", + ref_rate); + } return 0; } +static const struct exynos5_usbdrd_phy_config phy_cfg_exynos2200[] = { + { + .id = EXYNOS5_DRDPHY_UTMI, + .phy_isol = exynos5_usbdrd_phy_isol, + .phy_init = exynos2200_usbdrd_utmi_init, + }, +}; + static int exynos5_usbdrd_orien_sw_set(struct typec_switch_dev *sw, enum typec_orientation orientation) { @@ -1767,6 +1937,19 @@ static const char * const exynos5_regulator_names[] = { "vbus", "vbus-boost", }; +static const struct exynos5_usbdrd_phy_drvdata exynos2200_usb32drd_phy = { + .phy_cfg = phy_cfg_exynos2200, + .phy_ops = &exynos2200_usbdrd_phy_ops, + .pmu_offset_usbdrd0_phy = EXYNOS2200_PHY_CTRL_USB20, + .clk_names = exynos5_clk_names, + .n_clks = ARRAY_SIZE(exynos5_clk_names), + /* clocks and regulators are specific to the underlying PHY blocks */ + .core_clk_names = NULL, + .n_core_clks = 0, + .regulator_names = NULL, + .n_regulators = 0, +}; + static const struct exynos5_usbdrd_phy_drvdata exynos5420_usbdrd_phy = { .phy_cfg = phy_cfg_exynos5, .phy_ops = &exynos5_usbdrd_phy_ops, @@ -2025,6 +2208,9 @@ static const struct of_device_id exynos5_usbdrd_phy_of_match[] = { .compatible = "google,gs101-usb31drd-phy", .data = &gs101_usbd31rd_phy }, { + .compatible = "samsung,exynos2200-usb32drd-phy", + .data = &exynos2200_usb32drd_phy, + }, { .compatible = "samsung,exynos5250-usbdrd-phy", .data = &exynos5250_usbdrd_phy }, { @@ -2099,6 +2285,17 @@ static int exynos5_usbdrd_phy_probe(struct platform_device *pdev) return PTR_ERR(phy_drd->reg_phy); } + /* + * USB32DRD 4nm controller implements Synopsys eUSB2.0 PHY + * and Synopsys SS/USBDP COMBOPHY, managed by external code. + */ + if (of_property_present(dev->of_node, "phy-names")) { + phy_drd->hs_phy = devm_of_phy_get(dev, dev->of_node, "hs"); + if (IS_ERR(phy_drd->hs_phy)) + return dev_err_probe(dev, PTR_ERR(phy_drd->hs_phy), + "failed to get hs_phy\n"); + } + ret = exynos5_usbdrd_phy_clk_handle(phy_drd); if (ret) return ret; diff --git a/include/linux/soc/samsung/exynos-regs-pmu.h b/include/linux/soc/samsung/exynos-regs-pmu.h index cde299a85384..e921e7fe9be7 100644 --- a/include/linux/soc/samsung/exynos-regs-pmu.h +++ b/include/linux/soc/samsung/exynos-regs-pmu.h @@ -187,6 +187,9 @@ /* Only for S5Pv210 */ #define S5PV210_EINT_WAKEUP_MASK 0xC004 +/* Only for Exynos2200 */ +#define EXYNOS2200_PHY_CTRL_USB20 0x72C + /* Only for Exynos4210 */ #define S5P_CMU_CLKSTOP_LCD1_LOWPWR 0x1154 #define S5P_CMU_RESET_LCD1_LOWPWR 0x1174 |