diff options
| -rw-r--r-- | drivers/gpu/drm/i915/intel_ddi.c | 115 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/intel_display.c | 2 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/intel_drv.h | 1 |
3 files changed, 118 insertions, 0 deletions
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index 08f210b8dafa..f44aae124771 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -105,3 +105,118 @@ void intel_prepare_ddi(struct drm_device *dev) intel_prepare_ddi_buffers(dev, PORT_E, true); } } + +static const long hsw_ddi_buf_ctl_values[] = { + DDI_BUF_EMP_400MV_0DB_HSW, + DDI_BUF_EMP_400MV_3_5DB_HSW, + DDI_BUF_EMP_400MV_6DB_HSW, + DDI_BUF_EMP_400MV_9_5DB_HSW, + DDI_BUF_EMP_600MV_0DB_HSW, + DDI_BUF_EMP_600MV_3_5DB_HSW, + DDI_BUF_EMP_600MV_6DB_HSW, + DDI_BUF_EMP_800MV_0DB_HSW, + DDI_BUF_EMP_800MV_3_5DB_HSW +}; + + +/* Starting with Haswell, different DDI ports can work in FDI mode for + * connection to the PCH-located connectors. For this, it is necessary to train + * both the DDI port and PCH receiver for the desired DDI buffer settings. + * + * The recommended port to work in FDI mode is DDI E, which we use here. Also, + * please note that when FDI mode is active on DDI E, it shares 2 lines with + * DDI A (which is used for eDP) + */ + +void hsw_fdi_link_train(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + u32 reg, temp, i; + + /* Configure CPU PLL, wait for warmup */ + I915_WRITE(SPLL_CTL, + SPLL_PLL_ENABLE | + SPLL_PLL_FREQ_1350MHz | + SPLL_PLL_SCC); + + /* Use SPLL to drive the output when in FDI mode */ + I915_WRITE(PORT_CLK_SEL(PORT_E), + PORT_CLK_SEL_SPLL); + I915_WRITE(PIPE_CLK_SEL(pipe), + PIPE_CLK_SEL_PORT(PORT_E)); + + udelay(20); + + /* Start the training iterating through available voltages and emphasis */ + for (i=0; i < ARRAY_SIZE(hsw_ddi_buf_ctl_values); i++) { + /* Configure DP_TP_CTL with auto-training */ + I915_WRITE(DP_TP_CTL(PORT_E), + DP_TP_CTL_FDI_AUTOTRAIN | + DP_TP_CTL_ENHANCED_FRAME_ENABLE | + DP_TP_CTL_LINK_TRAIN_PAT1 | + DP_TP_CTL_ENABLE); + + /* Configure and enable DDI_BUF_CTL for DDI E with next voltage */ + temp = I915_READ(DDI_BUF_CTL(PORT_E)); + temp = (temp & ~DDI_BUF_EMP_MASK); + I915_WRITE(DDI_BUF_CTL(PORT_E), + temp | + DDI_BUF_CTL_ENABLE | + DDI_PORT_WIDTH_X2 | + hsw_ddi_buf_ctl_values[i]); + + udelay(600); + + /* Enable CPU FDI Receiver with auto-training */ + reg = FDI_RX_CTL(pipe); + I915_WRITE(reg, + I915_READ(reg) | + FDI_LINK_TRAIN_AUTO | + FDI_RX_ENABLE | + FDI_LINK_TRAIN_PATTERN_1_CPT | + FDI_RX_ENHANCE_FRAME_ENABLE | + FDI_PORT_WIDTH_2X_LPT | + FDI_RX_PLL_ENABLE); + POSTING_READ(reg); + udelay(100); + + temp = I915_READ(DP_TP_STATUS(PORT_E)); + if (temp & DP_TP_STATUS_AUTOTRAIN_DONE) { + DRM_DEBUG_DRIVER("BUF_CTL training done on %d step\n", i); + + /* Enable normal pixel sending for FDI */ + I915_WRITE(DP_TP_CTL(PORT_E), + DP_TP_CTL_FDI_AUTOTRAIN | + DP_TP_CTL_LINK_TRAIN_NORMAL | + DP_TP_CTL_ENHANCED_FRAME_ENABLE | + DP_TP_CTL_ENABLE); + + /* Enable PIPE_DDI_FUNC_CTL for the pipe to work in FDI mode */ + temp = I915_READ(DDI_FUNC_CTL(pipe)); + temp &= ~PIPE_DDI_PORT_MASK; + temp |= PIPE_DDI_SELECT_PORT(PORT_E) | + PIPE_DDI_MODE_SELECT_FDI | + PIPE_DDI_FUNC_ENABLE | + PIPE_DDI_PORT_WIDTH_X2; + I915_WRITE(DDI_FUNC_CTL(pipe), + temp); + break; + } else { + DRM_ERROR("Error training BUF_CTL %d\n", i); + + /* Disable DP_TP_CTL and FDI_RX_CTL) and retry */ + I915_WRITE(DP_TP_CTL(PORT_E), + I915_READ(DP_TP_CTL(PORT_E)) & + ~DP_TP_CTL_ENABLE); + I915_WRITE(FDI_RX_CTL(pipe), + I915_READ(FDI_RX_CTL(pipe)) & + ~FDI_RX_PLL_ENABLE); + continue; + } + } + + DRM_DEBUG_KMS("FDI train done.\n"); +} diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 096a1b1eaf46..3edf8f6ce2f4 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -6607,6 +6607,8 @@ static void intel_init_display(struct drm_device *dev) /* FIXME: detect B0+ stepping and use auto training */ dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train; dev_priv->display.write_eld = ironlake_write_eld; + } else if (IS_HASWELL(dev)) { + dev_priv->display.fdi_link_train = hsw_fdi_link_train; } else dev_priv->display.update_wm = NULL; } else if (IS_VALLEYVIEW(dev)) { diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index e6ce02b57305..a5bb5b6ebb4f 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -447,6 +447,7 @@ extern void intel_write_eld(struct drm_encoder *encoder, struct drm_display_mode *mode); extern void intel_cpt_verify_modeset(struct drm_device *dev, int pipe); extern void intel_prepare_ddi(struct drm_device *dev); +extern void hsw_fdi_link_train(struct drm_crtc *crtc); /* For use by IVB LP watermark workaround in intel_sprite.c */ extern void intel_update_watermarks(struct drm_device *dev); |