diff options
6 files changed, 29 insertions, 47 deletions
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c index ddfcf9949d9e..9db6ec62787a 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c @@ -452,8 +452,7 @@ static int _rtl92cu_init_power_on(struct ieee80211_hw *hw) break; } if (pollingCount++ > 100) { - RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, - "Failed to polling REG_APS_FSMCO[PFM_ALDN] done!\n"); + pr_err("Failed to polling REG_APS_FSMCO[PFM_ALDN] done!\n"); return -ENODEV; } } while (true); @@ -486,8 +485,7 @@ static int _rtl92cu_init_power_on(struct ieee80211_hw *hw) break; } if (pollingCount++ > 1000) { - RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, - "Failed to polling REG_APS_FSMCO[APFM_ONMAC] done!\n"); + pr_err("Failed to polling REG_APS_FSMCO[APFM_ONMAC] done!\n"); return -ENODEV; } } while (true); @@ -687,7 +685,6 @@ static void _rtl92cu_init_chipN_three_out_ep_priority(struct ieee80211_hw *hw, u8 queue_sel) { u16 beQ, bkQ, viQ, voQ, mgtQ, hiQ; - struct rtl_priv *rtlpriv = rtl_priv(hw); if (!wmm_enable) { /* typical setting */ beQ = QUEUE_LOW; @@ -705,8 +702,7 @@ static void _rtl92cu_init_chipN_three_out_ep_priority(struct ieee80211_hw *hw, hiQ = QUEUE_HIGH; } _rtl92c_init_chipN_reg_priority(hw, beQ, bkQ, viQ, voQ, mgtQ, hiQ); - RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "Tx queue select :0x%02x..\n", - queue_sel); + pr_info("Tx queue select :0x%02x..\n", queue_sel); } static void _rtl92cu_init_chipN_queue_priority(struct ieee80211_hw *hw, @@ -765,8 +761,7 @@ static void _rtl92cu_init_chipT_queue_priority(struct ieee80211_hw *hw, break; } rtl_write_byte(rtlpriv, (REG_TRXDMA_CTRL+1), hq_sele); - RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "Tx queue select :0x%02x..\n", - hq_sele); + pr_info("Tx queue select :0x%02x..\n", hq_sele); } static void _rtl92cu_init_queue_priority(struct ieee80211_hw *hw, @@ -848,8 +843,7 @@ static int _rtl92cu_init_mac(struct ieee80211_hw *hw) err = _rtl92cu_init_power_on(hw); if (err) { - RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, - "Failed to init power on!\n"); + pr_err("Failed to init power on!\n"); return err; } if (!wmm_enable) { @@ -860,8 +854,7 @@ static int _rtl92cu_init_mac(struct ieee80211_hw *hw) : WMM_CHIP_A_TX_PAGE_BOUNDARY; } if (false == rtl92c_init_llt_table(hw, boundary)) { - RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, - "Failed to init LLT Table!\n"); + pr_err("Failed to init LLT Table!\n"); return -EINVAL; } _rtl92cu_init_queue_reserved_page(hw, wmm_enable, out_ep_nums, @@ -986,7 +979,7 @@ int rtl92cu_hw_init(struct ieee80211_hw *hw) rtlhal->hw_type = HARDWARE_TYPE_RTL8192CU; err = _rtl92cu_init_mac(hw); if (err) { - RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "init mac failed!\n"); + pr_err("init mac failed!\n"); goto exit; } err = rtl92c_download_fw(hw); @@ -1099,8 +1092,7 @@ static void _ResetDigitalProcedure1(struct ieee80211_hw *hw, bool bWithoutHWSM) udelay(50); } if (retry_cnts >= 100) { - RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, - "#####=> 8051 reset failed!.........................\n"); + pr_err("8051 reset failed!.........................\n"); /* if 8051 reset fail, reset MAC. */ rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, @@ -1340,8 +1332,7 @@ static int _rtl92cu_set_media_status(struct ieee80211_hw *hw, "Set Network type to AP!\n"); break; default: - RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, - "Network type %d not supported!\n", type); + pr_err("Network type %d not supported!\n", type); goto error_out; } rtl_write_byte(rtlpriv, MSR, bt_msr); @@ -1555,8 +1546,7 @@ void rtl92cu_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val) case HAL_DEF_WOWLAN: break; default: - RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, - "switch case %#x not processed\n", variable); + pr_err("switch case %#x not processed\n", variable); break; } } @@ -1926,8 +1916,7 @@ void rtl92cu_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val) break; } default: - RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, - "switch case %#x not processed\n", variable); + pr_err("switch case %#x not processed\n", variable); break; } } diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/led.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/led.c index c6240813ff7b..70ea6c5692a5 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/led.c +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/led.c @@ -57,8 +57,8 @@ void rtl92cu_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled) rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg & 0x0f) | BIT(5)); break; default: - RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, - "switch case %#x not processed\n", pled->ledpin); + pr_err("switch case %#x not processed\n", + pled->ledpin); break; } pled->ledon = true; @@ -90,8 +90,8 @@ void rtl92cu_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled) rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg | BIT(3))); break; default: - RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, - "switch case %#x not processed\n", pled->ledpin); + pr_err("switch case %#x not processed\n", + pled->ledpin); break; } pled->ledon = false; diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c index cf212f694db5..1b124eade846 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c @@ -157,9 +157,8 @@ bool rtl92c_llt_write(struct ieee80211_hw *hw, u32 address, u32 data) if (_LLT_NO_ACTIVE == _LLT_OP_VALUE(value)) break; if (count > POLLING_LLT_THRESHOLD) { - RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, - "Failed to polling write LLT done at address %d! _LLT_OP_VALUE(%x)\n", - address, _LLT_OP_VALUE(value)); + pr_err("Failed to polling write LLT done at address %d! _LLT_OP_VALUE(%x)\n", + address, _LLT_OP_VALUE(value)); status = false; break; } @@ -262,8 +261,7 @@ void rtl92c_set_key(struct ieee80211_hw *hw, u32 key_index, enc_algo = CAM_AES; break; default: - RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, - "illegal switch case\n"); + pr_err("illegal switch case\n"); enc_algo = CAM_TKIP; break; } @@ -280,9 +278,7 @@ void rtl92c_set_key(struct ieee80211_hw *hw, u32 key_index, entry_id = rtl_cam_get_free_entry(hw, p_macaddr); if (entry_id >= TOTAL_CAM_ENTRY) { - RT_TRACE(rtlpriv, COMP_SEC, - DBG_EMERG, - "Can not find free hw security cam entry\n"); + pr_err("Can not find free hw security cam entry\n"); return; } } else { diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/phy.c index f35f435c094e..f068dd5317a7 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/phy.c +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/phy.c @@ -274,8 +274,7 @@ bool rtl92cu_phy_config_rf_with_headerfile(struct ieee80211_hw *hw, break; case RF90_PATH_C: case RF90_PATH_D: - RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, - "switch case %#x not processed\n", rfpath); + pr_err("switch case %#x not processed\n", rfpath); break; default: break; @@ -314,8 +313,8 @@ void rtl92cu_phy_set_bw_mode_callback(struct ieee80211_hw *hw) rtl_write_byte(rtlpriv, REG_RRSR + 2, reg_prsr_rsc); break; default: - RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, - "unknown bandwidth: %#X\n", rtlphy->current_chan_bw); + pr_err("unknown bandwidth: %#X\n", + rtlphy->current_chan_bw); break; } switch (rtlphy->current_chan_bw) { @@ -336,8 +335,8 @@ void rtl92cu_phy_set_bw_mode_callback(struct ieee80211_hw *hw) HAL_PRIME_CHNL_OFFSET_LOWER) ? 2 : 1); break; default: - RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, - "unknown bandwidth: %#X\n", rtlphy->current_chan_bw); + pr_err("unknown bandwidth: %#X\n", + rtlphy->current_chan_bw); break; } rtl92cu_phy_rf6052_set_bandwidth(hw, rtlphy->current_chan_bw); @@ -509,8 +508,8 @@ static bool _rtl92cu_phy_set_rf_power_state(struct ieee80211_hw *hw, _rtl92c_phy_set_rf_sleep(hw); break; default: - RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, - "switch case %#x not processed\n", rfpwr_state); + pr_err("switch case %#x not processed\n", + rfpwr_state); bresult = false; break; } diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/rf.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/rf.c index 5e3183024aa0..9cff6bc4049c 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/rf.c +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/rf.c @@ -51,8 +51,7 @@ void rtl92cu_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth) rtlphy->rfreg_chnlval[0]); break; default: - RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, - "unknown bandwidth: %#X\n", bandwidth); + pr_err("unknown bandwidth: %#X\n", bandwidth); break; } } diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/sw.c index b84e13ac6ead..935e8308e2e6 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/sw.c +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/sw.c @@ -68,8 +68,7 @@ static int rtl92cu_init_sw_vars(struct ieee80211_hw *hw) /* for firmware buf */ rtlpriv->rtlhal.pfirmware = vzalloc(0x4000); if (!rtlpriv->rtlhal.pfirmware) { - RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, - "Can't alloc buffer for fw\n"); + pr_err("Can't alloc buffer for fw\n"); return 1; } if (IS_VENDOR_UMC_A_CUT(rtlpriv->rtlhal.version) && @@ -158,7 +157,7 @@ static struct rtl_hal_ops rtl8192cu_hal_ops = { static struct rtl_mod_params rtl92cu_mod_params = { .sw_crypto = 0, - .debug = DBG_EMERG, + .debug = 0, }; module_param_named(swenc, rtl92cu_mod_params.sw_crypto, bool, 0444); |