diff options
282 files changed, 20100 insertions, 3197 deletions
diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt index 23c097812d98..7fd64ec9ee1d 100644 --- a/Documentation/devicetree/bindings/arm/atmel-at91.txt +++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt @@ -52,6 +52,7 @@ System Timer (ST) required properties: - reg: Should contain registers location and length - interrupts: Should contain interrupt for the ST which is the IRQ line shared across all System Controller members. +- clocks: phandle to input clock. Its subnodes can be: - watchdog: compatible should be "atmel,at91rm9200-wdt" @@ -63,7 +64,7 @@ TC/TCLIB Timer required properties: Note that you can specify several interrupt cells if the TC block has one interrupt per channel. - clock-names: tuple listing input clock names. - Required elements: "t0_clk" + Required elements: "t0_clk", "slow_clk" Optional elements: "t1_clk", "t2_clk" - clocks: phandles to input clocks. @@ -91,12 +92,14 @@ RSTC Reset Controller required properties: - compatible: Should be "atmel,<chip>-rstc". <chip> can be "at91sam9260" or "at91sam9g45" or "sama5d3" - reg: Should contain registers location and length +- clocks: phandle to input clock. Example: rstc@fffffd00 { compatible = "atmel,at91sam9260-rstc"; reg = <0xfffffd00 0x10>; + clocks = <&clk32k>; }; RAMC SDRAM/DDR Controller required properties: @@ -119,6 +122,7 @@ required properties: - compatible: Should be "atmel,<chip>-shdwc". <chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5". - reg: Should contain registers location and length +- clocks: phandle to input clock. optional properties: - atmel,wakeup-mode: String, operation mode of the wakeup mode. @@ -137,9 +141,10 @@ optional at91sam9x5 properties: Example: - rstc@fffffd00 { - compatible = "atmel,at91sam9260-rstc"; - reg = <0xfffffd00 0x10>; + shdwc@fffffd10 { + compatible = "atmel,at91sam9260-shdwc"; + reg = <0xfffffd10 0x10>; + clocks = <&clk32k>; }; Special Function Registers (SFR) diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt new file mode 100644 index 000000000000..6824b3180ffb --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt @@ -0,0 +1,14 @@ +Raspberry Pi VideoCore firmware driver + +Required properties: + +- compatible: Should be "raspberrypi,bcm2835-firmware" +- mboxes: Phandle to the firmware device's Mailbox. + (See: ../mailbox/mailbox.txt for more information) + +Example: + +firmware { + compatible = "raspberrypi,bcm2835-firmware"; + mboxes = <&mailbox>; +}; diff --git a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt index 4f40ff3fee4b..5171ad8f48ff 100644 --- a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt +++ b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt @@ -20,6 +20,8 @@ And in addition, the compatible shall be extended with the specific board. Currently known boards are: "buffalo,lschlv2" +"buffalo,lswvl" +"buffalo,lswxl" "buffalo,lsxhl" "buffalo,lsxl" "dlink,dns-320" diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt index dd7550a29db6..2daa424a13a4 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.txt +++ b/Documentation/devicetree/bindings/arm/mediatek.txt @@ -5,6 +5,7 @@ Boards with a MediaTek mt65xx/mt81xx SoC shall have the following property: Required root node property: compatible: Must contain one of + "mediatek,mt6580" "mediatek,mt6589" "mediatek,mt6592" "mediatek,mt8127" @@ -14,6 +15,9 @@ compatible: Must contain one of Supported boards: +- Evaluation board for MT6580: + Required root node properties: + - compatible = "mediatek,mt6580-evbp1", "mediatek,mt6580"; - bq Aquaris5 smart phone: Required root node properties: - compatible = "mundoreader,bq-aquaris5", "mediatek,mt6589"; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt index 4f5a5352ccd8..3c9c3a7f3d25 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt @@ -11,6 +11,7 @@ Required properties: "mediatek,mt6592-sysirq" "mediatek,mt6589-sysirq" "mediatek,mt6582-sysirq" + "mediatek,mt6580-sysirq" "mediatek,mt6577-sysirq" - interrupt-controller : Identifies the node as an interrupt controller - #interrupt-cells : Use the same format as specified by GIC in diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index 4f6a82cef1d1..9f4e5136e568 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -135,6 +135,9 @@ Boards: - AM335X OrionLXm : Substation Automation Platform compatible = "novatech,am335x-lxm", "ti,am33xx" +- AM335X phyBOARD-WEGA: Single Board Computer dev kit + compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx" + - OMAP5 EVM : Evaluation Module compatible = "ti,omap5-evm", "ti,omap5" diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt index 60d4a1e0a9b5..af58cd74aeff 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.txt +++ b/Documentation/devicetree/bindings/arm/rockchip.txt @@ -26,3 +26,38 @@ Rockchip platforms device tree bindings - ChipSPARK PopMetal-RK3288 board: Required root node properties: - compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288"; + +- Netxeon R89 board: + Required root node properties: + - compatible = "netxeon,r89", "rockchip,rk3288"; + +- Google Jerry (Hisense Chromebook C11 and more): + Required root node properties: + - compatible = "google,veyron-jerry-rev7", "google,veyron-jerry-rev6", + "google,veyron-jerry-rev5", "google,veyron-jerry-rev4", + "google,veyron-jerry-rev3", "google,veyron-jerry", + "google,veyron", "rockchip,rk3288"; + +- Google Minnie (Asus Chromebook Flip C100P): + Required root node properties: + - compatible = "google,veyron-minnie-rev4", "google,veyron-minnie-rev3", + "google,veyron-minnie-rev2", "google,veyron-minnie-rev1", + "google,veyron-minnie-rev0", "google,veyron-minnie", + "google,veyron", "rockchip,rk3288"; + +- Google Pinky (dev-board): + Required root node properties: + - compatible = "google,veyron-pinky-rev2", "google,veyron-pinky", + "google,veyron", "rockchip,rk3288"; + +- Google Speedy (Asus C201 Chromebook): + Required root node properties: + - compatible = "google,veyron-speedy-rev9", "google,veyron-speedy-rev8", + "google,veyron-speedy-rev7", "google,veyron-speedy-rev6", + "google,veyron-speedy-rev5", "google,veyron-speedy-rev4", + "google,veyron-speedy-rev3", "google,veyron-speedy-rev2", + "google,veyron-speedy", "google,veyron", "rockchip,rk3288"; + +- Rockchip R88 board: + Required root node properties: + - compatible = "rockchip,r88", "rockchip,rk3368"; diff --git a/Documentation/devicetree/bindings/clock/imx6ul-clock.txt b/Documentation/devicetree/bindings/clock/imx6ul-clock.txt new file mode 100644 index 000000000000..571d5039f663 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx6ul-clock.txt @@ -0,0 +1,13 @@ +* Clock bindings for Freescale i.MX6 UltraLite + +Required properties: +- compatible: Should be "fsl,imx6ul-ccm" +- reg: Address and length of the register set +- #clock-cells: Should be <1> +- clocks: list of clock specifiers, must contain an entry for each required + entry in clock-names +- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1" + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6ul-clock.h +for the full list of i.MX6 UltraLite clock IDs. diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt index efb51cf0c845..d8b168ebd5f1 100644 --- a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt +++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt @@ -21,8 +21,8 @@ Required properties: "st,stih416-plls-c32-ddr", "st,clkgen-plls-c32" "st,stih407-plls-c32-a0", "st,clkgen-plls-c32" "st,stih407-plls-c32-a9", "st,clkgen-plls-c32" - "st,stih407-plls-c32-c0_0", "st,clkgen-plls-c32" - "st,stih407-plls-c32-c0_1", "st,clkgen-plls-c32" + "sst,plls-c32-cx_0", "st,clkgen-plls-c32" + "sst,plls-c32-cx_1", "st,clkgen-plls-c32" "st,stih415-gpu-pll-c32", "st,clkgengpu-pll-c32" "st,stih416-gpu-pll-c32", "st,clkgengpu-pll-c32" diff --git a/Documentation/devicetree/bindings/memory-controllers/synopsys.txt b/Documentation/devicetree/bindings/memory-controllers/synopsys.txt index f9c6454146b6..a43d26d41e04 100644 --- a/Documentation/devicetree/bindings/memory-controllers/synopsys.txt +++ b/Documentation/devicetree/bindings/memory-controllers/synopsys.txt @@ -1,5 +1,9 @@ Binding for Synopsys IntelliDDR Multi Protocol Memory Controller +This controller has an optional ECC support in half-bus width (16-bit) +configuration. The ECC controller corrects one bit error and detects +two bit errors. + Required properties: - compatible: Should be 'xlnx,zynq-ddrc-a05' - reg: Base address and size of the controllers memory area diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt new file mode 100644 index 000000000000..a81bbf37ed66 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt @@ -0,0 +1,36 @@ +* Freescale i.MX6 UltraLite IOMUX Controller + +Please refer to fsl,imx-pinctrl.txt in this directory for common binding part +and usage. + +Required properties: +- compatible: "fsl,imx6ul-iomuxc" +- fsl,pins: each entry consists of 6 integers and represents the mux and config + setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val + input_val> are specified using a PIN_FUNC_ID macro, which can be found in + imx6ul-pinfunc.h under device tree source folder. The last integer CONFIG is + the pad setting value like pull-up on this pin. Please refer to i.MX6 UltraLite + Reference Manual for detailed CONFIG settings. + +CONFIG bits definition: +PAD_CTL_HYS (1 << 16) +PAD_CTL_PUS_100K_DOWN (0 << 14) +PAD_CTL_PUS_47K_UP (1 << 14) +PAD_CTL_PUS_100K_UP (2 << 14) +PAD_CTL_PUS_22K_UP (3 << 14) +PAD_CTL_PUE (1 << 13) +PAD_CTL_PKE (1 << 12) +PAD_CTL_ODE (1 << 11) +PAD_CTL_SPEED_LOW (0 << 6) +PAD_CTL_SPEED_MED (1 << 6) +PAD_CTL_SPEED_HIGH (3 << 6) +PAD_CTL_DSE_DISABLE (0 << 3) +PAD_CTL_DSE_260ohm (1 << 3) +PAD_CTL_DSE_130ohm (2 << 3) +PAD_CTL_DSE_87ohm (3 << 3) +PAD_CTL_DSE_65ohm (4 << 3) +PAD_CTL_DSE_52ohm (5 << 3) +PAD_CTL_DSE_43ohm (6 << 3) +PAD_CTL_DSE_37ohm (7 << 3) +PAD_CTL_SRE_FAST (1 << 0) +PAD_CTL_SRE_SLOW (0 << 0) diff --git a/Documentation/devicetree/bindings/reset/socfpga-reset.txt b/Documentation/devicetree/bindings/reset/socfpga-reset.txt index 32c1c8bfd5dc..98c9f560e5c5 100644 --- a/Documentation/devicetree/bindings/reset/socfpga-reset.txt +++ b/Documentation/devicetree/bindings/reset/socfpga-reset.txt @@ -3,6 +3,7 @@ Altera SOCFPGA Reset Manager Required properties: - compatible : "altr,rst-mgr" - reg : Should contain 1 register ranges(address and length) +- altr,modrst-offset : Should contain the offset of the first modrst register. - #reset-cells: 1 Example: @@ -10,4 +11,5 @@ Example: #reset-cells = <1>; compatible = "altr,rst-mgr"; reg = <0xffd05000 0x1000>; + altr,modrst-offset = <0x10>; }; diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt index 34c1505774bf..5d3791e789c6 100644 --- a/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt @@ -5,6 +5,7 @@ Required properties: - reg: physical base address of the controller and length of memory mapped region. - interrupts: rtc alarm/event interrupt +- clocks: phandle to input clock. Example: @@ -12,4 +13,5 @@ rtc@fffffe00 { compatible = "atmel,at91rm9200-rtc"; reg = <0xfffffe00 0x100>; interrupts = <1 4 7>; + clocks = <&clk32k>; }; diff --git a/Documentation/devicetree/bindings/rtc/rtc-omap.txt b/Documentation/devicetree/bindings/rtc/rtc-omap.txt index 4ba4dbd34289..43a83668673a 100644 --- a/Documentation/devicetree/bindings/rtc/rtc-omap.txt +++ b/Documentation/devicetree/bindings/rtc/rtc-omap.txt @@ -8,6 +8,7 @@ Required properties: Wakeup generation for event Alarm. It can also be used to control an external PMIC via the pmic_power_en pin. + - "ti,am4372-rtc" - for RTC IP used similar to that on AM437X SoC family. - reg: Address range of rtc register set - interrupts: rtc timer, alarm interrupts in order - interrupt-parent: phandle for the interrupt controller diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt index 8d63f1da07aa..a875997f2062 100644 --- a/Documentation/devicetree/bindings/serial/mtk-uart.txt +++ b/Documentation/devicetree/bindings/serial/mtk-uart.txt @@ -7,8 +7,9 @@ Required properties: * "mediatek,mt8173-uart" for MT8173 compatible UARTS * "mediatek,mt6589-uart" for MT6589 compatible UARTS * "mediatek,mt6582-uart" for MT6582 compatible UARTS + * "mediatek,mt6580-uart" for MT6580 compatible UARTS * "mediatek,mt6577-uart" for all compatible UARTS (MT8173, MT6589, MT6582, - MT6577) + MT6580, MT6577) - reg: The base address of the UART register bank. diff --git a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt index 7c4408ff4b83..53a3029b7589 100644 --- a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt +++ b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt @@ -2,7 +2,11 @@ Mediatek MT6577, MT6572 and MT6589 Timers --------------------------------------- Required properties: -- compatible: Should be "mediatek,mt6577-timer" +- compatible should contain: + * "mediatek,mt6589-timer" for MT6589 compatible timers + * "mediatek,mt6580-timer" for MT6580 compatible timers + * "mediatek,mt6577-timer" for all compatible timers (MT6589, MT6580, + MT6577) - reg: Should contain location and length for timers register. - clocks: Clocks driving the timer hardware. This list should include two clocks. The order is system clock and as second clock the RTC clock. diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index d444757c4d9e..d3fbd1f30eb4 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -46,6 +46,7 @@ chipone ChipOne chipspark ChipSPARK chrp Common Hardware Reference Platform chunghwa Chunghwa Picture Tubes Ltd. +ciaa Computadora Industrial Abierta Argentina cirrus Cirrus Logic, Inc. cloudengines Cloud Engines, Inc. cnm Chips&Media, Inc. @@ -135,6 +136,7 @@ mitsubishi Mitsubishi Electric Corporation mosaixtech Mosaix Technologies, Inc. moxa Moxa mpl MPL AG +msi Micro-Star International Co. Ltd. mti Imagination Technologies Ltd. (formerly MIPS Technologies Inc.) mundoreader Mundo Reader S.L. murata Murata Manufacturing Co., Ltd. @@ -143,6 +145,7 @@ national National Semiconductor neonode Neonode Inc. netgear NETGEAR netlogic Broadcom Corporation (formerly NetLogic Microsystems) +netxeon Shenzhen Netxeon Technology CO., LTD newhaven Newhaven Display International nintendo Nintendo nokia Nokia diff --git a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt index a4d869744f59..86fa6de1019b 100644 --- a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt @@ -6,6 +6,7 @@ Required properties: - compatible: must be "atmel,at91sam9260-wdt". - reg: physical base address of the controller and length of memory mapped region. +- clocks: phandle to input clock. Optional properties: - timeout-sec: contains the watchdog timeout in seconds. @@ -39,6 +40,7 @@ Example: compatible = "atmel,at91sam9260-wdt"; reg = <0xfffffd40 0x10>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; timeout-sec = <15>; atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 917aa318929d..233159d2eaab 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -41,6 +41,7 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \ at91sam9x35ek.dtb dtb-$(CONFIG_SOC_SAM_V7) += \ at91-kizbox2.dtb \ + at91-sama5d2_xplained.dtb \ at91-sama5d3_xplained.dtb \ sama5d31ek.dtb \ sama5d33ek.dtb \ @@ -176,6 +177,8 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ kirkwood-km_kirkwood.dtb \ kirkwood-laplug.dtb \ kirkwood-lschlv2.dtb \ + kirkwood-lswvl.dtb \ + kirkwood-lswxl.dtb \ kirkwood-lsxhl.dtb \ kirkwood-mplcec4.dtb \ kirkwood-mv88f6281gtw-ge.dtb \ @@ -211,6 +214,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ kirkwood-ts419-6281.dtb \ kirkwood-ts419-6282.dtb dtb-$(CONFIG_ARCH_LPC18XX) += \ + lpc4337-ciaa.dtb \ lpc4350-hitex-eval.dtb \ lpc4357-ea4357-devkit.dtb dtb-$(CONFIG_ARCH_LPC32XX) += \ @@ -331,6 +335,8 @@ dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-sabreauto.dtb \ imx6sx-sdb-reva.dtb \ imx6sx-sdb.dtb +dtb-$(CONFIG_SOC_IMX6UL) += \ + imx6ul-14x14-evk.dtb dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-sdb.dtb dtb-$(CONFIG_SOC_LS1021A) += \ @@ -390,6 +396,8 @@ dtb-$(CONFIG_ARCH_OMAP3) += \ omap3-cm-t3530.dtb \ omap3-cm-t3730.dtb \ omap3-devkit8000.dtb \ + omap3-devkit8000-lcd43.dtb \ + omap3-devkit8000-lcd70.dtb \ omap3-evm.dtb \ omap3-evm-37xx.dtb \ omap3-gta04a3.dtb \ @@ -409,15 +417,19 @@ dtb-$(CONFIG_ARCH_OMAP3) += \ omap3-overo-alto35.dtb \ omap3-overo-chestnut43.dtb \ omap3-overo-gallop43.dtb \ + omap3-overo-palo35.dtb \ omap3-overo-palo43.dtb \ omap3-overo-storm-alto35.dtb \ omap3-overo-storm-chestnut43.dtb \ omap3-overo-storm-gallop43.dtb \ + omap3-overo-storm-palo35.dtb \ omap3-overo-storm-palo43.dtb \ omap3-overo-storm-summit.dtb \ omap3-overo-storm-tobi.dtb \ + omap3-overo-storm-tobiduo.dtb \ omap3-overo-summit.dtb \ omap3-overo-tobi.dtb \ + omap3-overo-tobiduo.dtb \ omap3-pandora-600mhz.dtb \ omap3-pandora-1ghz.dtb \ omap3-sbc-t3517.dtb \ @@ -426,6 +438,8 @@ dtb-$(CONFIG_ARCH_OMAP3) += \ omap3-thunder.dtb \ omap3-zoom3.dtb dtb-$(CONFIG_SOC_TI81XX) += \ + dm8148-evm.dtb \ + dm8148-t410.dtb \ dm8168-evm.dtb dtb-$(CONFIG_SOC_AM33XX) += \ am335x-baltos-ir5221.dtb \ @@ -438,7 +452,8 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-nano.dtb \ am335x-pepper.dtb \ am335x-lxm.dtb \ - am335x-chiliboard.dtb + am335x-chiliboard.dtb \ + am335x-wega-rdk.dtb dtb-$(CONFIG_ARCH_OMAP4) += \ omap4-duovero-parlor.dtb \ omap4-panda.dtb \ @@ -464,6 +479,8 @@ dtb-$(CONFIG_SOC_DRA7XX) += \ dtb-$(CONFIG_ARCH_ORION5X) += \ orion5x-lacie-d2-network.dtb \ orion5x-lacie-ethernet-disk-mini-v2.dtb \ + orion5x-linkstation-lswtgl.dtb \ + orion5x-lswsgl.dtb \ orion5x-maxtor-shared-storage-2.dtb \ orion5x-rd88f5182-nas.dtb dtb-$(CONFIG_ARCH_PRIMA2) += \ @@ -488,7 +505,12 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-evb-act8846.dtb \ rk3288-evb-rk808.dtb \ rk3288-firefly-beta.dtb \ - rk3288-firefly.dtb + rk3288-firefly.dtb \ + rk3288-r89.dtb \ + rk3288-veyron-jerry.dtb \ + rk3288-veyron-minnie.dtb \ + rk3288-veyron-pinky.dtb \ + rk3288-veyron-speedy.dtb dtb-$(CONFIG_ARCH_S3C24XX) += \ s3c2416-smdk2416.dtb dtb-$(CONFIG_ARCH_S3C64XX) += \ @@ -513,12 +535,15 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \ r8a7790-lager.dtb \ r8a7791-henninger.dtb \ r8a7791-koelsch.dtb \ + r8a7793-gose.dtb \ r8a7794-alt.dtb \ + r8a7794-silk.dtb \ sh73a0-kzm9g.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += \ socfpga_arria5_socdk.dtb \ socfpga_arria10_socdk_sdmmc.dtb \ socfpga_cyclone5_socdk.dtb \ + socfpga_cyclone5_de0_sockit.dtb \ socfpga_cyclone5_sockit.dtb \ socfpga_cyclone5_socrates.dtb \ socfpga_vt.dtb @@ -541,7 +566,9 @@ dtb-$(CONFIG_ARCH_STI) += \ stih416-b2020.dtb \ stih416-b2020e.dtb \ stih418-b2199.dtb -dtb-$(CONFIG_ARCH_STM32)+= stm32f429-disco.dtb +dtb-$(CONFIG_ARCH_STM32)+= \ + stm32f429-disco.dtb \ + stm32429i-eval.dtb dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-a1000.dtb \ sun4i-a10-ba10-tvbox.dtb \ @@ -551,6 +578,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-hackberry.dtb \ sun4i-a10-hyundai-a7hd.dtb \ sun4i-a10-inet97fv2.dtb \ + sun4i-a10-itead-iteaduino-plus.dts \ sun4i-a10-jesurun-q5.dtb \ sun4i-a10-marsboard.dtb \ sun4i-a10-mini-xplus.dtb \ @@ -598,6 +626,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a23-ippo-q8h-v1.2.dtb \ sun8i-a33-et-q8-v1.6.dtb \ sun8i-a33-ga10h-v1.1.dtb \ + sun8i-a33-ippo-q8h-v1.2.dtb \ sun8i-a33-sinlinx-sina33.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ @@ -639,10 +668,11 @@ dtb-$(CONFIG_ARCH_U8500) += \ ste-ccu8540.dtb \ ste-ccu9540.dtb dtb-$(CONFIG_ARCH_UNIPHIER) += \ - uniphier-ph1-sld3-ref.dtb \ uniphier-ph1-ld4-ref.dtb \ + uniphier-ph1-ld6b-ref.dtb \ uniphier-ph1-pro4-ref.dtb \ - uniphier-ph1-sld8-ref.dtb + uniphier-ph1-sld3-ref.dtb \ + uniphier-ph1-sld8-ref.dtb dtb-$(CONFIG_ARCH_VERSATILE) += \ versatile-ab.dtb \ versatile-pb.dtb @@ -702,6 +732,7 @@ dtb-$(CONFIG_MACH_DOVE) += \ dove-dove-db.dtb \ dove-sbc-a510.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += \ + mt6580-evbp1.dtb \ mt6589-aquaris5.dtb \ mt6592-evb.dtb \ mt8127-moose.dtb \ diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index 5c42d259fa68..eadbba32386d 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -68,16 +68,26 @@ &lcdc { status = "okay"; + port { + lcdc_0: endpoint@0 { + remote-endpoint = <&hdmi_0>; + }; + }; }; -/ { - hdmi { - compatible = "ti,tilcdc,slave"; - i2c = <&i2c0>; +&i2c0 { + tda19988 { + compatible = "nxp,tda998x"; + reg = <0x70>; pinctrl-names = "default", "off"; pinctrl-0 = <&nxp_hdmi_bonelt_pins>; pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; - status = "okay"; + + port { + hdmi_0: endpoint@0 { + remote-endpoint = <&lcdc_0>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 765be2766eb0..1942a5c8132d 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -136,16 +136,29 @@ }; sound { - compatible = "ti,da830-evm-audio"; - ti,model = "AM335x-EVM"; - ti,audio-codec = <&tlv320aic3106>; - ti,mcasp-controller = <&mcasp1>; - ti,codec-clock-rate = <12000000>; - ti,audio-routing = - "Headphone Jack", "HPLOUT", - "Headphone Jack", "HPROUT", - "LINE1L", "Line In", - "LINE1R", "Line In"; + compatible = "simple-audio-card"; + simple-audio-card,name = "AM335x-EVM"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Line", "Line In"; + simple-audio-card,routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "LINE1L", "Line In", + "LINE1R", "Line In"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&sound_master>; + simple-audio-card,frame-master = <&sound_master>; + simple-audio-card,bitclock-inversion; + + simple-audio-card,cpu { + sound-dai = <&mcasp1>; + }; + + sound_master: simple-audio-card,codec { + sound-dai = <&tlv320aic3106>; + system-clock-frequency = <12000000>; + }; }; }; @@ -342,7 +355,7 @@ >; }; - am335x_evm_audio_pins: am335x_evm_audio_pins { + mcasp1_pins: mcasp1_pins { pinctrl-single,pins = < 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ @@ -351,6 +364,15 @@ >; }; + mcasp1_pins_sleep: mcasp1_pins_sleep { + pinctrl-single,pins = < + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + dcan1_pins_default: dcan1_pins_default { pinctrl-single,pins = < 0x168 (PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.d_can1_tx */ @@ -460,6 +482,7 @@ }; tlv320aic3106: tlv320aic3106@1b { + #sound-dai-cells = <0>; compatible = "ti,tlv320aic3106"; reg = <0x1b>; status = "okay"; @@ -575,19 +598,21 @@ #include "tps65910.dtsi" &mcasp1 { - pinctrl-names = "default"; - pinctrl-0 = <&am335x_evm_audio_pins>; + #sound-dai-cells = <0>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mcasp1_pins>; + pinctrl-1 = <&mcasp1_pins_sleep>; - status = "okay"; + status = "okay"; - op-mode = <0>; /* MCASP_IIS_MODE */ - tdm-slots = <2>; - /* 4 serializers */ - serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ - 0 0 1 2 - >; - tx-num-evt = <32>; - rx-num-evt = <32>; + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + /* 4 serializers */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 1 2 + >; + tx-num-evt = <32>; + rx-num-evt = <32>; }; &tps { diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 156d05efcb70..315bb02c9920 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -141,14 +141,26 @@ }; sound { - compatible = "ti,da830-evm-audio"; - ti,model = "AM335x-EVMSK"; - ti,audio-codec = <&tlv320aic3106>; - ti,mcasp-controller = <&mcasp1>; - ti,codec-clock-rate = <24000000>; - ti,audio-routing = - "Headphone Jack", "HPLOUT", - "Headphone Jack", "HPROUT"; + compatible = "simple-audio-card"; + simple-audio-card,name = "AM335x-EVMSK"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&sound_master>; + simple-audio-card,frame-master = <&sound_master>; + simple-audio-card,bitclock-inversion; + + simple-audio-card,cpu { + sound-dai = <&mcasp1>; + }; + + sound_master: simple-audio-card,codec { + sound-dai = <&tlv320aic3106>; + system-clock-frequency = <24000000>; + }; }; panel { @@ -396,6 +408,15 @@ >; }; + mcasp1_pins_sleep: mcasp1_pins_sleep { + pinctrl-single,pins = < + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + mmc2_pins: pinmux_mmc2_pins { pinctrl-single,pins = < 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */ @@ -462,6 +483,7 @@ }; tlv320aic3106: tlv320aic3106@1b { + #sound-dai-cells = <0>; compatible = "ti,tlv320aic3106"; reg = <0x1b>; status = "okay"; @@ -661,19 +683,21 @@ }; &mcasp1 { - pinctrl-names = "default"; - pinctrl-0 = <&mcasp1_pins>; + #sound-dai-cells = <0>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mcasp1_pins>; + pinctrl-1 = <&mcasp1_pins_sleep>; - status = "okay"; + status = "okay"; - op-mode = <0>; /* MCASP_IIS_MODE */ - tdm-slots = <2>; - /* 4 serializers */ - serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ - 0 0 1 2 - >; - tx-num-evt = <32>; - rx-num-evt = <32>; + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + /* 4 serializers */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 1 2 + >; + tx-num-evt = <32>; + rx-num-evt = <32>; }; &tscadc { diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi new file mode 100644 index 000000000000..4d28fc3aac69 --- /dev/null +++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi @@ -0,0 +1,368 @@ +/* + * Copyright (C) 2015 Phytec Messtechnik GmbH + * Author: Teresa Remmet <t.remmet@phytec.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "am33xx.dtsi" + +/ { + model = "Phytec AM335x phyCORE"; + compatible = "phytec,am335x-phycore-som", "ti,am33xx"; + + aliases { + rtc0 = &i2c_rtc; + rtc1 = &rtc; + }; + + cpus { + cpu@0 { + cpu0-supply = <&vdd1_reg>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + vbat: fixedregulator@0 { + compatible = "regulator-fixed"; + }; +}; + +/* Crypto Module */ +&aes { + status = "okay"; +}; + +&sham { + status = "okay"; +}; + +/* Ethernet */ +&am33xx_pinmux { + ethernet0_pins: pinmux_ethernet0 { + pinctrl-single,pins = < + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ + 0x114 (PIN_OUTPUT | MUX_MODE1) /* mii1_txen.rmii1_txen */ + 0x124 (PIN_OUTPUT | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ + 0x128 (PIN_OUTPUT | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk.rmii1_refclk */ + >; + }; + + mdio_pins: pinmux_mdio { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "rmii"; + dual_emac_res_vlan = <1>; +}; + +&davinci_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + status = "okay"; +}; + +&mac { + slaves = <1>; + pinctrl-names = "default"; + pinctrl-0 = <ðernet0_pins>; + status = "okay"; +}; + +&phy_sel { + rmii-clock-ext; +}; + +/* I2C Busses */ +&am33xx_pinmux { + i2c0_pins: pinmux_i2c0 { + pinctrl-single,pins = < + 0x188 (PIN_INPUT | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + clock-frequency = <400000>; + status = "okay"; + + tps: pmic@2d { + reg = <0x2d>; + }; + + i2c_eeprom: eeprom@52 { + compatible = "atmel,24c32"; + pagesize = <32>; + reg = <0x52>; + status = "disabled"; + }; + + i2c_rtc: rtc@68 { + compatible = "rv4162"; + reg = <0x68>; + status = "disabled"; + }; +}; + +/* NAND memory */ +&am33xx_pinmux { + nandflash_pins: pinmux_nandflash { + pinctrl-single,pins = < + 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ + 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ + 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ + 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ + 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ + 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ + 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ + 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ + 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ + 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ + 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ + 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ + 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ + 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + >; + }; +}; + +&elm { + status = "okay"; +}; + +&gpmc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&nandflash_pins>; + ranges = <0 0 0x08000000 0x1000000>; /* CS0: NAND */ + nandflash: nand@0,0 { + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + nand-bus-width = <8>; + ti,nand-ecc-opt = "bch8"; + gpmc,device-nand = "true"; + gpmc,device-width = <1>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <30>; + gpmc,cs-wr-off-ns = <30>; + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <30>; + gpmc,adv-wr-off-ns = <30>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <20>; + gpmc,oe-on-ns = <10>; + gpmc,oe-off-ns = <30>; + gpmc,access-ns = <30>; + gpmc,rd-cycle-ns = <30>; + gpmc,wr-cycle-ns = <30>; + gpmc,wait-on-read = "true"; + gpmc,wait-on-write = "true"; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <50>; + gpmc,cycle2cycle-diffcsen; + gpmc,clk-activation-ns = <0>; + gpmc,wait-monitoring-ns = <0>; + gpmc,wr-access-ns = <30>; + gpmc,wr-data-mux-bus-ns = <0>; + + elm_id = <&elm>; + + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "xload"; + reg = <0x0 0x20000>; + }; + partition@1 { + label = "xload_backup1"; + reg = <0x20000 0x20000>; + }; + partition@2 { + label = "xload_backup2"; + reg = <0x40000 0x20000>; + }; + partition@3 { + label = "xload_backup3"; + reg = <0x60000 0x20000>; + }; + partition@4 { + label = "barebox"; + reg = <0x80000 0x80000>; + }; + partition@5 { + label = "bareboxenv"; + reg = <0x100000 0x40000>; + }; + partition@6 { + label = "oftree"; + reg = <0x140000 0x40000>; + }; + partition@7 { + label = "kernel"; + reg = <0x180000 0x800000>; + }; + partition@8 { + label = "root"; + reg = <0x980000 0x0>; + }; + }; +}; + +/* Power */ +#include "tps65910.dtsi" + +&tps { + vcc1-supply = <&vbat>; + vcc2-supply = <&vbat>; + vcc3-supply = <&vbat>; + vcc4-supply = <&vbat>; + vcc5-supply = <&vbat>; + vcc6-supply = <&vbat>; + vcc7-supply = <&vbat>; + vccio-supply = <&vbat>; + + regulators { + vrtc_reg: regulator@0 { + regulator-always-on; + }; + + vio_reg: regulator@1 { + regulator-always-on; + }; + + vdd1_reg: regulator@2 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1312500>; + regulator-boot-on; + regulator-always-on; + }; + + vdd2_reg: regulator@3 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd3_reg: regulator@4 { + regulator-always-on; + }; + + vdig1_reg: regulator@5 { + regulator-name = "vdig1_1p8v"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vdig2_reg: regulator@6 { + regulator-always-on; + }; + + vpll_reg: regulator@7 { + regulator-always-on; + }; + + vdac_reg: regulator@8 { + regulator-always-on; + }; + + vaux1_reg: regulator@9 { + regulator-always-on; + }; + + vaux2_reg: regulator@10 { + regulator-always-on; + }; + + vaux33_reg: regulator@11 { + regulator-always-on; + }; + + vmmc_reg: regulator@12 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; +}; + +&vbat { + regulator-name = "vbat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; +}; + +/* SPI Busses */ +&am33xx_pinmux { + spi0_pins: pinmux_spi0 { + pinctrl-single,pins = < + 0x150 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* spi0_clk.spi0_clk */ + 0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* spi0_d0.spi0_d0 */ + 0x158 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */ + 0x15c (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */ + >; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + status = "okay"; + + serial_flash: m25p80@0 { + compatible = "m25p80"; + spi-max-frequency = <48000000>; + reg = <0x0>; + m25p,fast-read; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "xload"; + reg = <0x0 0x20000>; + }; + partition@1 { + label = "barebox"; + reg = <0x20000 0x80000>; + }; + partition@2 { + label = "bareboxenv"; + reg = <0xa0000 0x20000>; + }; + partition@3 { + label = "oftree"; + reg = <0xc0000 0x20000>; + }; + partition@4 { + label = "kernel"; + reg = <0xe0000 0x0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/am335x-wega-rdk.dts b/arch/arm/boot/dts/am335x-wega-rdk.dts new file mode 100644 index 000000000000..6431b7db8109 --- /dev/null +++ b/arch/arm/boot/dts/am335x-wega-rdk.dts @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2015 Phytec Messtechnik GmbH + * Author: Teresa Remmet <t.remmet@phytec.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "am335x-phycore-som.dtsi" +#include "am335x-wega.dtsi" + +/* SoM */ +&i2c_eeprom { + status = "okay"; +}; + +&i2c_rtc { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi new file mode 100644 index 000000000000..5e541bd1b45a --- /dev/null +++ b/arch/arm/boot/dts/am335x-wega.dtsi @@ -0,0 +1,151 @@ +/* + * Copyright (C) 2015 Phytec Messtechnik GmbH + * Author: Teresa Remmet <t.remmet@phytec.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + model = "Phytec AM335x phyBOARD-WEGA"; + compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx"; + +}; + +/* CAN Busses */ +&am33xx_pinmux { + dcan1_pins: pinmux_dcan1 { + pinctrl-single,pins = < + 0x168 (PIN_OUTPUT_PULLUP | MUX_MODE2) /* uart0_ctsn.d_can1_tx */ + 0x16c (PIN_INPUT_PULLUP | MUX_MODE2) /* uart0_rtsn.d_can1_rx */ + >; + }; +}; + +&dcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&dcan1_pins>; + status = "okay"; +}; + +/* Ethernet */ +&am33xx_pinmux { + ethernet1_pins: pinmux_ethernet1 { + pinctrl-single,pins = < + 0x40 (PIN_OUTPUT | MUX_MODE1) /* gpmc_a0.mii2_txen */ + 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a1.mii2_rxdv */ + 0x48 (PIN_OUTPUT | MUX_MODE1) /* gpmc_a2.mii2_txd3 */ + 0x4c (PIN_OUTPUT | MUX_MODE1) /* gpmc_a3.mii2_txd2 */ + 0x50 (PIN_OUTPUT | MUX_MODE1) /* gpmc_a4.mii2_txd1 */ + 0x54 (PIN_OUTPUT | MUX_MODE1) /* gpmc_a5.mii2_txd0 */ + 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a6.mii2_txclk */ + 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a7.mii2_rxclk */ + 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a8.mii2_rxd3 */ + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a9.mii2_rxd2 */ + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a10.mii2_rxd1 */ + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_a11.mii2_rxd0 */ + 0x74 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_wpn.mii2_rxerr */ + 0x78 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* gpmc_ben1.mii2_col */ + >; + }; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <1>; + phy-mode = "mii"; + dual_emac_res_vlan = <2>; +}; + +&mac { + slaves = <2>; + pinctrl-names = "default"; + pinctrl-0 = <ðernet0_pins ðernet1_pins>; + dual_emac = <1>; +}; + +/* MMC */ +&am33xx_pinmux { + mmc1_pins: pinmux_mmc1 { + pinctrl-single,pins = < + 0x0F0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ + 0x0F4 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ + 0x0F8 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ + 0x0FC (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ + 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + 0x104 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ + 0x160 (PIN_INPUT_PULLUP | MUX_MODE7) /* spi0_cs1.mmc0_sdcd */ + >; + }; +}; + +&mmc1 { + vmmc-supply = <&vmmc_reg>; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +/* UARTs */ +&am33xx_pinmux { + uart0_pins: pinmux_uart0 { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ + 0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ + 0x178 (PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */ + 0x17c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */ + >; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; +}; + +/* USB */ +&cppi41dma { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb0 { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1 { + dr_mode = "host"; + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index b76f9a2ce05d..9117c1a1a4e2 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -103,6 +103,15 @@ #size-cells = <1>; ranges = <0 0x44c00000 0x280000>; + wkup_m3: wkup_m3@100000 { + compatible = "ti,am3352-wkup-m3"; + reg = <0x100000 0x4000>, + <0x180000 0x2000>; + reg-names = "umem", "dmem"; + ti,hwmods = "wkup_m3"; + ti,pm-firmware = "am335x-pm-firmware.elf"; + }; + prcm: prcm@200000 { compatible = "ti,am3-prcm"; reg = <0x200000 0x4000>; @@ -144,6 +153,14 @@ }; }; + wkup_m3_ipc: wkup_m3_ipc@1324 { + compatible = "ti,am3352-wkup-m3-ipc"; + reg = <0x1324 0x24>; + interrupts = <78>; + ti,rproc = <&wkup_m3>; + mboxes = <&mailbox &mbox_wkupm3>; + }; + scm_clockdomains: clockdomains { }; }; @@ -762,14 +779,6 @@ reg = <0x40300000 0x10000>; /* 64k */ }; - wkup_m3: wkup_m3@44d00000 { - compatible = "ti,am3353-wkup-m3"; - reg = <0x44d00000 0x4000 /* M3 UMEM */ - 0x44d80000 0x2000>; /* M3 DMEM */ - ti,hwmods = "wkup_m3"; - ti,no-reset-on-init; - }; - elm: elm@48080000 { compatible = "ti,am3352-elm"; reg = <0x48080000 0x2000>; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 359a3b6daf4f..564900b9fcce 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -23,6 +23,11 @@ i2c1 = &i2c1; i2c2 = &i2c2; serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; ethernet0 = &cpsw_emac0; ethernet1 = &cpsw_emac1; }; @@ -59,6 +64,27 @@ interrupt-parent = <&gic>; }; + scu: scu@48240000 { + compatible = "arm,cortex-a9-scu"; + reg = <0x48240000 0x100>; + }; + + global_timer: timer@48240200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x48240200 0x100>; + interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + clocks = <&dpll_mpu_m2_ck>; + }; + + local_timer: timer@48240600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x48240600 0x100>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + clocks = <&dpll_mpu_m2_ck>; + }; + l2-cache-controller@48242000 { compatible = "arm,pl310-cache"; reg = <0x48242000 0x1000>; @@ -83,6 +109,15 @@ #size-cells = <1>; ranges = <0 0x44c00000 0x287000>; + wkup_m3: wkup_m3@100000 { + compatible = "ti,am4372-wkup-m3"; + reg = <0x100000 0x4000>, + <0x180000 0x2000>; + reg-names = "umem", "dmem"; + ti,hwmods = "wkup_m3"; + ti,pm-firmware = "am335x-pm-firmware.elf"; + }; + prcm: prcm@1f0000 { compatible = "ti,am4-prcm"; reg = <0x1f0000 0x11000>; @@ -128,6 +163,14 @@ }; }; + wkup_m3_ipc: wkup_m3_ipc@1324 { + compatible = "ti,am4372-wkup-m3-ipc"; + reg = <0x1324 0x44>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + ti,rproc = <&wkup_m3>; + mboxes = <&mailbox &mbox_wkupm3>; + }; + scm_clockdomains: clockdomains { }; }; @@ -309,7 +352,8 @@ }; rtc: rtc@44e3e000 { - compatible = "ti,am4372-rtc","ti,da830-rtc"; + compatible = "ti,am4372-rtc", "ti,am3352-rtc", + "ti,da830-rtc"; reg = <0x44e3e000 0x1000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; @@ -528,8 +572,11 @@ #address-cells = <1>; #size-cells = <1>; ti,hwmods = "cpgmac0"; - clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>; - clock-names = "fck", "cpts"; + clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>, + <&dpll_clksel_mac_clk>; + clock-names = "fck", "cpts", "50mclk"; + assigned-clocks = <&dpll_clksel_mac_clk>; + assigned-clock-rates = <50000000>; status = "disabled"; cpdma_channels = <8>; ale_entries = <1024>; @@ -866,7 +913,12 @@ usb1: usb@48390000 { compatible = "synopsys,dwc3"; reg = <0x48390000 0x10000>; - interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "peripheral", + "host", + "otg"; phys = <&usb2_phy1>; phy-names = "usb2-phy"; maximum-speed = "high-speed"; @@ -890,7 +942,12 @@ usb2: usb@483d0000 { compatible = "synopsys,dwc3"; reg = <0x483d0000 0x10000>; - interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "peripheral", + "host", + "otg"; phys = <&usb2_phy2>; phy-names = "usb2-phy"; maximum-speed = "high-speed"; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 84aa30c3235a..215775dc6948 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -21,12 +21,11 @@ aliases { display0 = &lcd0; - serial3 = &uart3; }; - vmmcsd_fixed: fixedregulator-sd { + evm_v3_3d: fixedregulator-v3_3d { compatible = "regulator-fixed"; - regulator-name = "vmmcsd_fixed"; + regulator-name = "evm_v3_3d"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; enable-active-high; @@ -83,17 +82,6 @@ compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; label = "lcd"; - pinctrl-names = "default"; - pinctrl-0 = <&lcd_pins>; - - /* - * SelLCDorHDMI, LOW to select HDMI. This is not really the - * panel's enable GPIO, but we don't have HDMI driver support nor - * support to switch between two displays, so using this gpio as - * panel's enable should be safe. - */ - enable-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>; - panel-timing { clock-frequency = <33000000>; hactive = <800>; @@ -124,6 +112,32 @@ clock-frequency = <12000000>; }; + sound0: sound@0 { + compatible = "simple-audio-card"; + simple-audio-card,name = "AM437x-GP-EVM"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Line", "Line In"; + simple-audio-card,routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "LINE1L", "Line In", + "LINE1R", "Line In"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&sound0_master>; + simple-audio-card,frame-master = <&sound0_master>; + simple-audio-card,bitclock-inversion; + + simple-audio-card,cpu { + sound-dai = <&mcasp1>; + system-clock-frequency = <12000000>; + }; + + sound0_master: simple-audio-card,codec { + sound-dai = <&tlv320aic3106>; + system-clock-frequency = <12000000>; + }; + }; }; &am43xx_pinmux { @@ -217,7 +231,6 @@ nand_flash_x8: nand_flash_x8 { pinctrl-single,pins = < - 0x26c(PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* spi2_cs0.gpio/eMMCorNANDsel */ 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ 0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ 0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ @@ -270,7 +283,7 @@ >; }; - lcd_pins: lcd_pins { + display_mux_pins: display_mux_pins { pinctrl-single,pins = < /* GPIO 5_8 to select LCD / HDMI */ 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7) @@ -409,6 +422,60 @@ 0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */ >; }; + + mcasp1_pins: mcasp1_pins { + pinctrl-single,pins = < + 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */ + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ + >; + }; + + mcasp1_sleep_pins: mcasp1_sleep_pins { + pinctrl-single,pins = < + 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + gpio0_pins: gpio0_pins { + pinctrl-single,pins = < + 0x26c (PIN_OUTPUT | MUX_MODE9) /* spi2_cs0.gpio0_23 SEL_eMMCorNANDn */ + >; + }; + + emmc_pins_default: emmc_pins_default { + pinctrl-single,pins = < + 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + >; + }; + + emmc_pins_sleep: emmc_pins_sleep { + pinctrl-single,pins = < + 0x00 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad0.gpio1_0 */ + 0x04 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad1.gpio1_1 */ + 0x08 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad2.gpio1_2 */ + 0x0c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad3.gpio1_3 */ + 0x10 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */ + 0x14 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */ + 0x18 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */ + 0x1c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */ + 0x80 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.gpio1_30 */ + 0x84 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.gpio1_31 */ + >; + }; }; &i2c0 { @@ -455,6 +522,8 @@ regulator-name = "v1_0bat"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; }; dcdc6: regulator-dcdc6 { @@ -462,6 +531,8 @@ regulator-name = "v1_8bat"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; }; ldo1: regulator-ldo1 { @@ -521,6 +592,19 @@ }; }; }; + + tlv320aic3106: tlv320aic3106@1b { + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic3106"; + reg = <0x1b>; + status = "okay"; + + /* Regulators */ + IOVDD-supply = <&evm_v3_3d>; /* V3_3D -> <tps63031> EN: V1_8D -> VBAT */ + AVDD-supply = <&evm_v3_3d>; /* v3_3AUD -> V3_3D -> ... */ + DRVDD-supply = <&evm_v3_3d>; /* v3_3AUD -> V3_3D -> ... */ + DVDD-supply = <&ldo1>; /* V1_8D -> LDO1 */ + }; }; &epwmss0 { @@ -542,7 +626,23 @@ }; &gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio0_pins>; status = "okay"; + + p23 { + gpio-hog; + gpios = <23 GPIO_ACTIVE_HIGH>; + /* SelEMMCorNAND selects between eMMC and NAND: + * Low: NAND + * High: eMMC + * When changing this line make sure the newly + * selected device node is enabled and the previously + * selected device node is disabled. + */ + output-low; + line-name = "SelEMMCorNAND"; + }; }; &gpio1 { @@ -558,19 +658,48 @@ }; &gpio5 { + pinctrl-names = "default"; + pinctrl-0 = <&display_mux_pins>; status = "okay"; ti,no-reset-on-init; + + p8 { + /* + * SelLCDorHDMI selects between display and audio paths: + * Low: HDMI display with audio via HDMI + * High: LCD display with analog audio via aic3111 codec + */ + gpio-hog; + gpios = <8 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "SelLCDorHDMI"; + }; }; &mmc1 { status = "okay"; - vmmc-supply = <&vmmcsd_fixed>; + vmmc-supply = <&evm_v3_3d>; bus-width = <4>; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; }; +/* eMMC sits on mmc2 */ +&mmc2 { + /* + * When enabling eMMC, disable GPMC/NAND and set + * SelEMMCorNAND to output-high + */ + status = "disabled"; + vmmc-supply = <&evm_v3_3d>; + bus-width = <8>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&emmc_pins_default>; + pinctrl-1 = <&emmc_pins_sleep>; + ti,non-removable; +}; + &mmc3 { status = "okay"; /* these are on the crossbar and are outlined in the @@ -651,6 +780,10 @@ }; &gpmc { + /* + * When enabling GPMC, disable eMMC and set + * SelEMMCorNAND to output-low + */ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&nand_flash_x8>; @@ -790,3 +923,21 @@ }; }; }; + +&mcasp1 { + #sound-dai-cells = <0>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mcasp1_pins>; + pinctrl-1 = <&mcasp1_sleep_pins>; + + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + /* 4 serializers */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 1 2 + >; + tx-num-evt = <32>; + rx-num-evt = <32>; +}; diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index c17097d2c167..22af44894c66 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -32,14 +32,29 @@ }; sound { - compatible = "ti,da830-evm-audio"; - ti,model = "AM437x-SK-EVM"; - ti,audio-codec = <&tlv320aic3106>; - ti,mcasp-controller = <&mcasp1>; - ti,codec-clock-rate = <24000000>; - ti,audio-routing = - "Headphone Jack", "HPLOUT", - "Headphone Jack", "HPROUT"; + compatible = "simple-audio-card"; + simple-audio-card,name = "AM437x-SK-EVM"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Line", "Line In"; + simple-audio-card,routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "LINE1L", "Line In", + "LINE1R", "Line In"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&sound_master>; + simple-audio-card,frame-master = <&sound_master>; + simple-audio-card,bitclock-inversion; + + simple-audio-card,cpu { + sound-dai = <&mcasp1>; + }; + + sound_master: simple-audio-card,codec { + sound-dai = <&tlv320aic3106>; + system-clock-frequency = <24000000>; + }; }; matrix_keypad: matrix_keypad@0 { @@ -364,6 +379,15 @@ >; }; + mcasp1_pins_sleep: mcasp1_pins_sleep { + pinctrl-single,pins = < + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + lcd_pins: lcd_pins { pinctrl-single,pins = < 0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */ @@ -480,6 +504,7 @@ }; tlv320aic3106: tlv320aic3106@1b { + #sound-dai-cells = <0>; compatible = "ti,tlv320aic3106"; reg = <0x1b>; status = "okay"; @@ -640,8 +665,10 @@ }; &mcasp1 { - pinctrl-names = "default"; + #sound-dai-cells = <0>; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&mcasp1_pins>; + pinctrl-1 = <&mcasp1_pins_sleep>; status = "okay"; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 795d68af6df9..86c2dfbe8875 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -14,6 +14,7 @@ #include <dt-bindings/pinctrl/am43xx.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/sound/tlv320aic31xx-micbias.h> / { model = "TI AM43x EPOS EVM"; @@ -31,21 +32,18 @@ enable-active-high; }; + vbat: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vbat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + lcd0: display { compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; label = "lcd"; - pinctrl-names = "default"; - pinctrl-0 = <&lcd_pins>; - - /* - * SelLCDorHDMI, LOW to select HDMI. This is not really the - * panel's enable GPIO, but we don't have HDMI driver support nor - * support to switch between two displays, so using this gpio as - * panel's enable should be safe. - */ - enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; - panel-timing { clock-frequency = <33000000>; hactive = <800>; @@ -108,6 +106,38 @@ brightness-levels = <0 51 53 56 62 75 101 152 255>; default-brightness-level = <8>; }; + + sound0: sound@0 { + compatible = "simple-audio-card"; + simple-audio-card,name = "AM43-EPOS-EVM"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Speaker", "Speaker"; + simple-audio-card,routing = + "MIC1LP", "Microphone Jack", + "MIC1RP", "Microphone Jack", + "MIC1LP", "MICBIAS", + "MIC1RP", "MICBIAS", + "Headphone Jack", "HPL", + "Headphone Jack", "HPR", + "Speaker", "SPL", + "Speaker", "SPR"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&sound0_master>; + simple-audio-card,frame-master = <&sound0_master>; + simple-audio-card,bitclock-inversion; + + simple-audio-card,cpu { + sound-dai = <&mcasp1>; + system-clock-frequency = <12000000>; + }; + + sound0_master: simple-audio-card,codec { + sound-dai = <&tlv320aic3111>; + system-clock-frequency = <12000000>; + }; + }; }; &am43xx_pinmux { @@ -278,7 +308,7 @@ >; }; - lcd_pins: lcd_pins { + display_mux_pins: display_mux_pins { pinctrl-single,pins = < /* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */ 0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7) @@ -320,6 +350,24 @@ 0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) >; }; + + mcasp1_pins: mcasp1_pins { + pinctrl-single,pins = < + 0x1a0 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_ACLKR/MCASP1_ACLKX */ + 0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_FSR/MCASP1_FSX */ + 0x1a8 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)/* MCASP0_AXR1/MCASP1_AXR0 */ + 0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_AHCLKX/MCASP1_AXR1 */ + >; + }; + + mcasp1_sleep_pins: mcasp1_sleep_pins { + pinctrl-single,pins = < + 0x1a0 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; }; &mmc1 { @@ -399,6 +447,15 @@ regulator-always-on; }; + dcdc4: regulator-dcdc4 { + compatible = "ti,tps65218-dcdc4"; + regulator-name = "vdcdc4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + dcdc5: regulator-dcdc5 { compatible = "ti,tps65218-dcdc5"; regulator-name = "v1_0bat"; @@ -441,6 +498,23 @@ touchscreen-size-x = <1024>; touchscreen-size-y = <600>; }; + + tlv320aic3111: tlv320aic3111@18 { + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic3111"; + reg = <0x18>; + status = "okay"; + + ai31xx-micbias-vg = <MICBIAS_2_0V>; + + /* Regulators */ + HPVDD-supply = <&dcdc4>; /* v3_3AUD -> V3_3D -> DCDC4 */ + SPRVDD-supply = <&vbat>; /* vbat */ + SPLVDD-supply = <&vbat>; /* vbat */ + AVDD-supply = <&dcdc4>; /* v3_3AUD -> V3_3D -> DCDC4 */ + IOVDD-supply = <&dcdc4>; /* V3_3D -> DCDC4 */ + DVDD-supply = <&ldo1>; /* V1_8AUD -> V1_8D -> LDO1 */ + }; }; &i2c2 { @@ -458,7 +532,21 @@ }; &gpio2 { + pinctrl-names = "default"; + pinctrl-0 = <&display_mux_pins>; status = "okay"; + + p1 { + /* + * SelLCDorHDMI selects between display and audio paths: + * Low: HDMI display with audio via HDMI + * High: LCD display with analog audio via aic3111 codec + */ + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "SelLCDorHDMI"; + }; }; &gpio3 { @@ -686,3 +774,21 @@ }; }; }; + +&mcasp1 { + #sound-dai-cells = <0>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mcasp1_pins>; + pinctrl-1 = <&mcasp1_sleep_pins>; + + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + /* 4 serializer */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 2 0 0 + >; + tx-num-evt = <32>; + rx-num-evt = <32>; +}; diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi index d0c0dfa4ec48..cc88728d751d 100644 --- a/arch/arm/boot/dts/am43xx-clocks.dtsi +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi @@ -486,6 +486,15 @@ reg = <0x4238>; }; + dpll_clksel_mac_clk: dpll_clksel_mac_clk { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_core_m5_ck>; + reg = <0x4234>; + ti,bit-shift = <2>; + ti,dividers = <2>, <5>; + }; + clk_32k_mosc_ck: clk_32k_mosc_ck { #clock-cells = <0>; compatible = "fixed-clock"; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index f9a4b317ed2f..3a05b94f59ed 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -580,7 +580,6 @@ vmmc-supply = <&ldo1_reg>; vmmc_aux-supply = <&vdd_3v3>; - pbias-supply = <&pbias_mmc_reg>; bus-width = <4>; cd-gpios = <&gpio6 27 0>; /* gpio 219 */ }; diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index 67a0ab0f71e0..e9a381741ce1 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -176,6 +176,10 @@ reg = <0x8000 0x1000>; cache-unified; cache-level = <2>; + arm,double-linefill-incr = <1>; + arm,double-linefill-wrap = <0>; + arm,double-linefill = <1>; + prefetch-data = <1>; }; scu@c000 { diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts index fd4f6fd8a2e8..353c92532e7a 100644 --- a/arch/arm/boot/dts/armada-388-gp.dts +++ b/arch/arm/boot/dts/armada-388-gp.dts @@ -81,10 +81,6 @@ pinctrl-0 = <&i2c0_pins>; status = "okay"; clock-frequency = <100000>; - /* - * The EEPROM located at adresse 54 is needed - * for the boot - DO NOT ERASE IT - - */ expander0: pca9555@20 { compatible = "nxp,pca9555"; @@ -111,6 +107,10 @@ reg = <0x21>; }; + eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + }; }; serial@12000 { @@ -301,9 +301,11 @@ reg_sata0: pwr-sata0 { compatible = "regulator-fixed"; regulator-name = "pwr_en_sata0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; enable-active-high; regulator-always-on; - + gpio = <&expander0 2 GPIO_ACTIVE_HIGH>; }; reg_5v_sata0: v5-sata0 { diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 04ecfe6e2bc6..f9f2347d9995 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -143,6 +143,10 @@ reg = <0x8000 0x1000>; cache-unified; cache-level = <2>; + arm,double-linefill-incr = <1>; + arm,double-linefill-wrap = <0>; + arm,double-linefill = <1>; + prefetch-data = <1>; }; scu@c000 { @@ -450,7 +454,7 @@ }; xor@60800 { - compatible = "marvell,orion-xor"; + compatible = "marvell,armada-380-xor", "marvell,orion-xor"; reg = <0x60800 0x100 0x60a00 0x100>; clocks = <&gateclk 22>; @@ -470,7 +474,7 @@ }; xor@60900 { - compatible = "marvell,orion-xor"; + compatible = "marvell,armada-380-xor", "marvell,orion-xor"; reg = <0x60900 0x100 0x60b00 0x100>; clocks = <&gateclk 28>; diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi index fc9864f85fc2..dc6efd386dbc 100644 --- a/arch/arm/boot/dts/armada-39x.dtsi +++ b/arch/arm/boot/dts/armada-39x.dtsi @@ -104,6 +104,10 @@ reg = <0x8000 0x1000>; cache-unified; cache-level = <2>; + arm,double-linefill-incr = <1>; + arm,double-linefill-wrap = <0>; + arm,double-linefill = <1>; + prefetch-data = <1>; }; scu@c000 { @@ -325,7 +329,7 @@ }; xor@60800 { - compatible = "marvell,orion-xor"; + compatible = "marvell,armada-380-xor", "marvell,orion-xor"; reg = <0x60800 0x100 0x60a00 0x100>; clocks = <&gateclk 22>; @@ -345,7 +349,7 @@ }; xor@60900 { - compatible = "marvell,orion-xor"; + compatible = "marvell,armada-380-xor", "marvell,orion-xor"; reg = <0x60900 0x100 0x60b00 0x100>; clocks = <&gateclk 28>; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts new file mode 100644 index 000000000000..e8d63afdb135 --- /dev/null +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -0,0 +1,134 @@ +/* + * at91-sama5d2_xplained.dts - Device Tree file for SAMA5D2 Xplained board + * + * Copyright (C) 2015 Atmel, + * 2015 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; +#include "sama5d2.dtsi" + +/ { + model = "Atmel SAMA5D2 Xplained"; + compatible = "atmel,sama5d2-xplained", "atmel,sama5d2", "atmel,sama5"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x20000000 0x80000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <12000000>; + }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; + + ahb { + usb0: gadget@00300000 { + status = "okay"; + }; + + usb1: ohci@00400000 { + num-ports = <3>; + status = "okay"; + }; + + usb2: ehci@00500000 { + status = "okay"; + }; + + apb { + spi0: spi@f8000000 { + status = "okay"; + + m25p80@0 { + compatible = "atmel,at25df321a"; + reg = <0>; + spi-max-frequency = <50000000>; + }; + }; + + macb0: ethernet@f8008000 { + phy-mode = "rmii"; + status = "okay"; + }; + + uart1: serial@f8020000 { + status = "okay"; + }; + + i2c0: i2c@f8028000 { + dmas = <0>, <0>; + status = "okay"; + }; + + uart3: serial@fc008000 { + status = "okay"; + }; + + i2c1: i2c@fc028000 { + dmas = <0>, <0>; + status = "okay"; + + at24@54 { + compatible = "atmel,24c02"; + reg = <0x54>; + pagesize = <16>; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index 22ad7c959103..07f46963335b 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -131,6 +131,15 @@ }; adc0: adc@fc034000 { + pinctrl-names = "default"; + pinctrl-0 = < + /* external trigger conflicts with USBA_VBUS */ + &pinctrl_adc0_ad0 + &pinctrl_adc0_ad1 + &pinctrl_adc0_ad2 + &pinctrl_adc0_ad3 + &pinctrl_adc0_ad4 + >; atmel,adc-vref = <3300>; status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts index d782f2926b73..49a59c7e4a5d 100644 --- a/arch/arm/boot/dts/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts @@ -100,6 +100,15 @@ }; adc0: adc@fc034000 { + pinctrl-names = "default"; + pinctrl-0 = < + /* external trigger conflicts with USBA_VBUS */ + &pinctrl_adc0_ad0 + &pinctrl_adc0_ad1 + &pinctrl_adc0_ad2 + &pinctrl_adc0_ad3 + &pinctrl_adc0_ad4 + >; /* The vref depends on JP22 of EK. If connect 1-2 then use 3.3V. connect 2-3 use 3.0V */ atmel,adc-vref = <3300>; /*atmel,adc-ts-wires = <4>;*/ /* Set up ADC touch screen */ diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index e3cfb9972f54..60edd8baebb8 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -359,6 +359,7 @@ compatible = "atmel,at91rm9200-st", "syscon", "simple-mfd"; reg = <0xfffffd00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&slow_xtal>; watchdog { compatible = "atmel,at91rm9200-wdt"; @@ -369,6 +370,7 @@ compatible = "atmel,at91rm9200-rtc"; reg = <0xfffffe00 0x40>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&slow_xtal>; status = "disabled"; }; @@ -378,8 +380,8 @@ interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0 18 IRQ_TYPE_LEVEL_HIGH 0 19 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>; - clock-names = "t0_clk", "t1_clk", "t2_clk"; + clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&slow_xtal>; + clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; }; tcb1: timer@fffa4000 { @@ -388,8 +390,8 @@ interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0 21 IRQ_TYPE_LEVEL_HIGH 0 22 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>; - clock-names = "t0_clk", "t1_clk", "t2_clk"; + clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>, <&slow_xtal>; + clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; }; i2c0: i2c@fffb8000 { diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 4bc347549102..be9c027ddd97 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -359,11 +359,13 @@ rstc@fffffd00 { compatible = "atmel,at91sam9260-rstc"; reg = <0xfffffd00 0x10>; + clocks = <&clk32k>; }; shdwc@fffffd10 { compatible = "atmel,at91sam9260-shdwc"; reg = <0xfffffd10 0x10>; + clocks = <&clk32k>; }; pit: timer@fffffd30 { @@ -379,8 +381,8 @@ interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0 18 IRQ_TYPE_LEVEL_HIGH 0 19 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>; - clock-names = "t0_clk", "t1_clk", "t2_clk"; + clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&clk32k>; + clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; }; tcb1: timer@fffdc000 { @@ -389,8 +391,8 @@ interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0 27 IRQ_TYPE_LEVEL_HIGH 0 28 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>; - clock-names = "t0_clk", "t1_clk", "t2_clk"; + clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>, <&clk32k>; + clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; }; pinctrl@fffff400 { @@ -973,6 +975,7 @@ compatible = "atmel,at91sam9260-wdt"; reg = <0xfffffd40 0x10>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index b2c44a07a3d0..ce1e3e94a40c 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -119,8 +119,8 @@ interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>, <18 IRQ_TYPE_LEVEL_HIGH 0>, <19 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>; - clock-names = "t0_clk", "t1_clk", "t2_clk"; + clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&slow_xtal>; + clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; }; usb1: gadget@fffa4000 { @@ -820,11 +820,13 @@ rstc@fffffd00 { compatible = "atmel,at91sam9260-rstc"; reg = <0xfffffd00 0x10>; + clocks = <&slow_xtal>; }; shdwc@fffffd10 { compatible = "atmel,at91sam9260-shdwc"; reg = <0xfffffd10 0x10>; + clocks = <&slow_xtal>; }; pit: timer@fffffd30 { @@ -846,6 +848,7 @@ compatible = "atmel,at91sam9260-wdt"; reg = <0xfffffd40 0x10>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&slow_xtal>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index e36d966ef5e8..f1f5fa3a9e6e 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -377,18 +377,20 @@ compatible = "atmel,at91rm9200-tcb"; reg = <0xfff7c000 0x100>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb_clk>; - clock-names = "t0_clk"; + clocks = <&tcb_clk>, <&slow_xtal>; + clock-names = "t0_clk", "slow_clk"; }; rstc@fffffd00 { compatible = "atmel,at91sam9260-rstc"; reg = <0xfffffd00 0x10>; + clocks = <&slow_xtal>; }; shdwc@fffffd10 { compatible = "atmel,at91sam9260-shdwc"; reg = <0xfffffd10 0x10>; + clocks = <&slow_xtal>; }; pinctrl@fffff200 { @@ -902,6 +904,7 @@ compatible = "atmel,at91sam9260-wdt"; reg = <0xfffffd40 0x10>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&slow_xtal>; atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; diff --git a/arch/arm/boot/dts/at91sam9g15.dtsi b/arch/arm/boot/dts/at91sam9g15.dtsi index cfd7044616d7..27de7dc0f0e0 100644 --- a/arch/arm/boot/dts/at91sam9g15.dtsi +++ b/arch/arm/boot/dts/at91sam9g15.dtsi @@ -7,6 +7,7 @@ */ #include "at91sam9x5.dtsi" +#include "at91sam9x5_lcd.dtsi" / { model = "Atmel AT91SAM9G15 SoC"; diff --git a/arch/arm/boot/dts/at91sam9g15ek.dts b/arch/arm/boot/dts/at91sam9g15ek.dts index 26b0444b0f96..d1d2b400f1c6 100644 --- a/arch/arm/boot/dts/at91sam9g15ek.dts +++ b/arch/arm/boot/dts/at91sam9g15ek.dts @@ -8,9 +8,34 @@ */ /dts-v1/; #include "at91sam9g15.dtsi" +#include "at91sam9x5dm.dtsi" #include "at91sam9x5ek.dtsi" / { model = "Atmel AT91SAM9G15-EK"; compatible = "atmel,at91sam9g15ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; + + ahb { + apb { + hlcdc: hlcdc@f8038000 { + status = "okay"; + }; + }; + }; + + backlight: backlight { + status = "okay"; + }; + + bl_reg: backlight_regulator { + status = "okay"; + }; + + panel: panel { + status = "okay"; + }; + + panel_reg: panel_regulator { + status = "okay"; + }; }; diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi index e35c2fcf8298..ff4115886f97 100644 --- a/arch/arm/boot/dts/at91sam9g35.dtsi +++ b/arch/arm/boot/dts/at91sam9g35.dtsi @@ -7,6 +7,7 @@ */ #include "at91sam9x5.dtsi" +#include "at91sam9x5_lcd.dtsi" #include "at91sam9x5_macb0.dtsi" / { diff --git a/arch/arm/boot/dts/at91sam9g35ek.dts b/arch/arm/boot/dts/at91sam9g35ek.dts index 641a9bf89ed1..23ec8b13f30a 100644 --- a/arch/arm/boot/dts/at91sam9g35ek.dts +++ b/arch/arm/boot/dts/at91sam9g35ek.dts @@ -8,6 +8,7 @@ */ /dts-v1/; #include "at91sam9g35.dtsi" +#include "at91sam9x5dm.dtsi" #include "at91sam9x5ek.dtsi" / { @@ -20,6 +21,26 @@ phy-mode = "rmii"; status = "okay"; }; + + hlcdc: hlcdc@f8038000 { + status = "okay"; + }; }; }; + + backlight: backlight { + status = "okay"; + }; + + bl_reg: backlight_regulator { + status = "okay"; + }; + + panel: panel { + status = "okay"; + }; + + panel_reg: panel_regulator { + status = "okay"; + }; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 18177f5a7464..18b8b9e29704 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -387,6 +387,7 @@ rstc@fffffd00 { compatible = "atmel,at91sam9g45-rstc"; reg = <0xfffffd00 0x10>; + clocks = <&clk32k>; }; pit: timer@fffffd30 { @@ -400,22 +401,23 @@ shdwc@fffffd10 { compatible = "atmel,at91sam9rl-shdwc"; reg = <0xfffffd10 0x10>; + clocks = <&clk32k>; }; tcb0: timer@fff7c000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfff7c000 0x100>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>; - clock-names = "t0_clk", "t1_clk", "t2_clk"; + clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>, <&clk32k>; + clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; }; tcb1: timer@fffd4000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffd4000 0x100>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>; - clock-names = "t0_clk", "t1_clk", "t2_clk"; + clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>, <&clk32k>; + clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; }; dma: dma-controller@ffffec00 { @@ -498,23 +500,31 @@ }; isi { - pinctrl_isi: isi-0 { - atmel,pins = <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE /* D8 */ - AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE /* D9 */ - AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* D10 */ - AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE /* D11 */ - AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* D0 */ - AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* D1 */ - AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* D2 */ - AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* D3 */ - AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* D4 */ - AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* D5 */ - AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* D6 */ - AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* D7 */ - AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PCK */ - AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* VSYNC */ - AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* HSYNC */ - AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_NONE /* MCK */>; + pinctrl_isi_data_0_7: isi-0-data-0-7 { + atmel,pins = + <AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* D0 */ + AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* D1 */ + AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* D2 */ + AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* D3 */ + AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* D4 */ + AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* D5 */ + AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* D6 */ + AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* D7 */ + AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PCK */ + AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* VSYNC */ + AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* HSYNC */ + }; + + pinctrl_isi_data_8_9: isi-0-data-8-9 { + atmel,pins = + <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE /* D8 */ + AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* D9 */ + }; + + pinctrl_isi_data_10_11: isi-0-data-10-11 { + atmel,pins = + <AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* D10 */ + AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* D11 */ }; }; @@ -1067,9 +1077,11 @@ interrupts = <26 IRQ_TYPE_LEVEL_HIGH 5>; clocks = <&isi_clk>; clock-names = "isi_clk"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_isi>; status = "disabled"; + port { + #address-cells = <1>; + #size-cells = <0>; + }; }; pwm0: pwm@fffb8000 { @@ -1113,6 +1125,7 @@ compatible = "atmel,at91sam9260-wdt"; reg = <0xfffffd40 0x10>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; @@ -1247,6 +1260,7 @@ compatible = "atmel,at91rm9200-rtc"; reg = <0xfffffdb0 0x30>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 1375d3362603..d1ae60a855d4 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -63,6 +63,25 @@ i2c0: i2c@fff84000 { status = "okay"; + ov2640: camera@30 { + compatible = "ovti,ov2640"; + reg = <0x30>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>; + resetb-gpios = <&pioD 12 GPIO_ACTIVE_LOW>; + pwdn-gpios = <&pioD 13 GPIO_ACTIVE_HIGH>; + clocks = <&pck1>; + clock-names = "xvclk"; + assigned-clocks = <&pck1>; + assigned-clock-rates = <25000000>; + + port { + ov2640_0: endpoint { + remote-endpoint = <&isi_0>; + bus-width = <8>; + }; + }; + }; }; i2c1: i2c@fff88000 { @@ -101,6 +120,22 @@ }; pinctrl@fffff200 { + camera_sensor { + pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 { + atmel,pins = + <AT91_PIOB 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_sensor_reset: sensor_reset-0 { + atmel,pins = + <AT91_PIOD 12 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + + pinctrl_sensor_power: sensor_power-0 { + atmel,pins = + <AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + }; mmc0 { pinctrl_board_mmc0: mmc0-board { atmel,pins = @@ -155,6 +190,18 @@ status = "okay"; }; + isi@fffb4000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_isi_data_0_7>; + status = "okay"; + port { + isi_0: endpoint { + remote-endpoint = <&ov2640_0>; + bus-width = <8>; + }; + }; + }; + pwm0: pwm@fffb8000 { status = "okay"; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 5c2a8c8c8bd4..32bc9a189db0 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -376,6 +376,7 @@ rstc@fffffe00 { compatible = "atmel,at91sam9g45-rstc"; reg = <0xfffffe00 0x10>; + clocks = <&clk32k>; }; pit: timer@fffffe30 { @@ -388,6 +389,7 @@ shdwc@fffffe10 { compatible = "atmel,at91sam9x5-shdwc"; reg = <0xfffffe10 0x10>; + clocks = <&clk32k>; }; sckc@fffffe50 { @@ -431,16 +433,44 @@ compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb_clk>; - clock-names = "t0_clk"; + clocks = <&tcb_clk>, <&clk32k>; + clock-names = "t0_clk", "slow_clk"; }; tcb1: timer@f800c000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf800c000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb_clk>; - clock-names = "t0_clk"; + clocks = <&tcb_clk>, <&clk32k>; + clock-names = "t0_clk", "slow_clk"; + }; + + hlcdc: hlcdc@f8038000 { + compatible = "atmel,at91sam9n12-hlcdc"; + reg = <0xf8038000 0x2000>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; + clock-names = "periph_clk", "sys_clk", "slow_clk"; + status = "disabled"; + + hlcdc-display-controller { + compatible = "atmel,hlcdc-display-controller"; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + }; + + hlcdc_pwm: hlcdc-pwm { + compatible = "atmel,hlcdc-pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_pwm>; + #pwm-cells = <3>; + }; }; dma: dma-controller@ffffec00 { @@ -475,6 +505,49 @@ }; }; + lcd { + pinctrl_lcd_base: lcd-base-0 { + atmel,pins = + <AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDVSYNC */ + AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDHSYNC */ + AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDDISP */ + AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDDEN */ + AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPCK */ + }; + + pinctrl_lcd_pwm: lcd-pwm-0 { + atmel,pins = <AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPWM */ + }; + + pinctrl_lcd_rgb888: lcd-rgb-3 { + atmel,pins = + <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */ + AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */ + AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */ + AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */ + AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */ + AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */ + AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */ + AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */ + AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */ + AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */ + AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */ + AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */ + AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */ + AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */ + AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */ + AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */ + AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD16 pin */ + AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD17 pin */ + AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD18 pin */ + AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD19 pin */ + AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD20 pin */ + AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD21 pin */ + AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD22 pin */ + AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD23 pin */ + }; + }; + usart0 { pinctrl_usart0: usart0-0 { atmel,pins = @@ -891,6 +964,7 @@ compatible = "atmel,at91sam9260-wdt"; reg = <0xfffffe40 0x10>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; @@ -901,6 +975,7 @@ compatible = "atmel,at91rm9200-rtc"; reg = <0xfffffeb0 0x40>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index eab17fcace6d..efa75064d38a 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -128,6 +128,22 @@ }; }; + hlcdc: hlcdc@f8038000 { + status = "okay"; + + hlcdc-display-controller { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; + + port@0 { + hlcdc_panel_output: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; + }; + }; + }; + usb1: gadget@f803c000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1_vbus_sense>; @@ -161,6 +177,23 @@ }; }; + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&hlcdc_pwm 0 50000 0>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + power-supply = <&bl_reg>; + status = "okay"; + }; + + bl_reg: backlight_regulator { + compatible = "regulator-fixed"; + regulator-name = "backlight-power-supply"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + status = "okay"; + }; + leds { compatible = "gpio-leds"; @@ -194,6 +227,34 @@ }; }; + panel: panel { + compatible = "qd,qd43003c0-40", "simple-panel"; + backlight = <&backlight>; + power-supply = <&panel_reg>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + panel_input: endpoint@0 { + reg = <0>; + remote-endpoint = <&hlcdc_panel_output>; + }; + }; + }; + + panel_reg: panel_regulator { + compatible = "regulator-fixed"; + regulator-name = "panel-power-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + status = "okay"; + }; + sound { compatible = "atmel,asoc-wm8904"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index c9920c64791c..a0b90aedd3b8 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -121,8 +121,8 @@ interrupts = <16 IRQ_TYPE_LEVEL_HIGH 0>, <17 IRQ_TYPE_LEVEL_HIGH 0>, <18 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>; - clock-names = "t0_clk", "t1_clk", "t2_clk"; + clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&clk32k>; + clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; }; mmc0: mmc@fffa4000 { @@ -1018,11 +1018,13 @@ rstc@fffffd00 { compatible = "atmel,at91sam9260-rstc"; reg = <0xfffffd00 0x10>; + clocks = <&clk32k>; }; shdwc@fffffd10 { compatible = "atmel,at91sam9260-shdwc"; reg = <0xfffffd10 0x10>; + clocks = <&clk32k>; }; pit: timer@fffffd30 { @@ -1036,6 +1038,7 @@ compatible = "atmel,at91sam9260-wdt"; reg = <0xfffffd40 0x10>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; status = "disabled"; }; @@ -1083,6 +1086,7 @@ compatible = "atmel,at91rm9200-rtc"; reg = <0xfffffe00 0x40>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi index 499cdc81f4c0..d9054e8167b7 100644 --- a/arch/arm/boot/dts/at91sam9x35.dtsi +++ b/arch/arm/boot/dts/at91sam9x35.dtsi @@ -7,6 +7,7 @@ */ #include "at91sam9x5.dtsi" +#include "at91sam9x5_lcd.dtsi" #include "at91sam9x5_macb0.dtsi" #include "at91sam9x5_can.dtsi" diff --git a/arch/arm/boot/dts/at91sam9x35ek.dts b/arch/arm/boot/dts/at91sam9x35ek.dts index 343d32818ca3..fcb67180ea26 100644 --- a/arch/arm/boot/dts/at91sam9x35ek.dts +++ b/arch/arm/boot/dts/at91sam9x35ek.dts @@ -8,6 +8,7 @@ */ /dts-v1/; #include "at91sam9x35.dtsi" +#include "at91sam9x5dm.dtsi" #include "at91sam9x5ek.dtsi" / { @@ -20,6 +21,25 @@ phy-mode = "rmii"; status = "okay"; }; + hlcdc: hlcdc@f8038000 { + status = "okay"; + }; }; }; + + backlight: backlight { + status = "okay"; + }; + + bl_reg: backlight_regulator { + status = "okay"; + }; + + panel: panel { + status = "okay"; + }; + + panel_reg: panel_regulator { + status = "okay"; + }; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index b6c8df8d380e..747d8f070a5c 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -376,11 +376,13 @@ rstc@fffffe00 { compatible = "atmel,at91sam9g45-rstc"; reg = <0xfffffe00 0x10>; + clocks = <&clk32k>; }; shdwc@fffffe10 { compatible = "atmel,at91sam9x5-shdwc"; reg = <0xfffffe10 0x10>; + clocks = <&clk32k>; }; pit: timer@fffffe30 { @@ -418,16 +420,16 @@ compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb0_clk>; - clock-names = "t0_clk"; + clocks = <&tcb0_clk>, <&clk32k>; + clock-names = "t0_clk", "slow_clk"; }; tcb1: timer@f800c000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf800c000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb0_clk>; - clock-names = "t0_clk"; + clocks = <&tcb0_clk>, <&clk32k>; + clock-names = "t0_clk", "slow_clk"; }; dma0: dma-controller@ffffec00 { @@ -1173,6 +1175,7 @@ compatible = "atmel,at91sam9260-wdt"; reg = <0xfffffe40 0x10>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; @@ -1183,6 +1186,7 @@ compatible = "atmel,at91sam9x5-rtc"; reg = <0xfffffeb0 0x40>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi index 485302e8233d..1629db9dd563 100644 --- a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi @@ -13,6 +13,137 @@ / { ahb { apb { + hlcdc: hlcdc@f8038000 { + compatible = "atmel,at91sam9x5-hlcdc"; + reg = <0xf8038000 0x4000>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; + clock-names = "periph_clk","sys_clk", "slow_clk"; + status = "disabled"; + + hlcdc-display-controller { + compatible = "atmel,hlcdc-display-controller"; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + }; + + hlcdc_pwm: hlcdc-pwm { + compatible = "atmel,hlcdc-pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_pwm>; + #pwm-cells = <3>; + }; + }; + + pinctrl@fffff400 { + lcd { + pinctrl_lcd_base: lcd-base-0 { + atmel,pins = + <AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDVSYNC */ + AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDHSYNC */ + AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDDISP */ + AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDDEN */ + AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPCK */ + }; + + pinctrl_lcd_pwm: lcd-pwm-0 { + atmel,pins = <AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDPWM */ + }; + + pinctrl_lcd_rgb444: lcd-rgb-0 { + atmel,pins = + <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */ + AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */ + AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */ + AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */ + AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */ + AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */ + AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */ + AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */ + AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */ + AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */ + AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */ + AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD11 pin */ + }; + + pinctrl_lcd_rgb565: lcd-rgb-1 { + atmel,pins = + <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */ + AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */ + AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */ + AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */ + AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */ + AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */ + AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */ + AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */ + AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */ + AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */ + AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */ + AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */ + AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */ + AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */ + AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */ + AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD15 pin */ + }; + + pinctrl_lcd_rgb666: lcd-rgb-2 { + atmel,pins = + <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */ + AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */ + AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */ + AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */ + AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */ + AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */ + AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */ + AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */ + AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */ + AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */ + AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */ + AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */ + AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */ + AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */ + AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */ + AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */ + AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD16 pin */ + AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD17 pin */ + }; + + pinctrl_lcd_rgb888: lcd-rgb-3 { + atmel,pins = + <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD0 pin */ + AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD1 pin */ + AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD2 pin */ + AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD3 pin */ + AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD4 pin */ + AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD5 pin */ + AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD6 pin */ + AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD7 pin */ + AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD8 pin */ + AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD9 pin */ + AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD10 pin */ + AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD11 pin */ + AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD12 pin */ + AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD13 pin */ + AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD14 pin */ + AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD15 pin */ + AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD16 pin */ + AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD17 pin */ + AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD18 pin */ + AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD19 pin */ + AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD20 pin */ + AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD21 pin */ + AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* LCDD22 pin */ + AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* LCDD23 pin */ + }; + }; + }; + pmc: pmc@fffffc00 { periphck { lcdc_clk: lcdc_clk { @@ -20,6 +151,14 @@ reg = <25>; }; }; + + systemck { + lcdck: lcdck { + #clock-cells = <0>; + reg = <3>; + clocks = <&mck>; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5dm.dtsi b/arch/arm/boot/dts/at91sam9x5dm.dtsi new file mode 100644 index 000000000000..34c089fe0bc0 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x5dm.dtsi @@ -0,0 +1,101 @@ +/* + * at91sam9x5dm.dtsi - Device Tree file for SAM9x5 display module + * + * Copyright (C) 2014 Atmel, + * 2014 Free Electrons + * + * Author: Boris Brezillon <boris.brezillon@free-electrons.com> + * + * Licensed under GPLv2 or later. + */ + +/ { + ahb { + apb { + i2c0: i2c@f8010000 { + qt1070: keyboard@1b { + compatible = "qt1070"; + reg = <0x1b>; + interrupt-parent = <&pioA>; + interrupts = <7 0x0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qt1070_irq>; + wakeup-source; + }; + }; + + hlcdc: hlcdc@f8038000 { + hlcdc-display-controller { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; + + port@0 { + hlcdc_panel_output: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; + }; + }; + }; + + adc0: adc@f804c000 { + atmel,adc-ts-wires = <4>; + atmel,adc-ts-pressure-threshold = <10000>; + status = "okay"; + }; + + pinctrl@fffff400 { + board { + pinctrl_qt1070_irq: qt1070_irq { + atmel,pins = + <AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + }; + }; + }; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&hlcdc_pwm 0 50000 0>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + power-supply = <&bl_reg>; + status = "disabled"; + }; + + bl_reg: backlight_regulator { + compatible = "regulator-fixed"; + regulator-name = "backlight-power-supply"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + status = "disabled"; + }; + + panel: panel { + compatible = "foxlink,fl500wvr00-a0t", "simple-panel"; + backlight = <&backlight>; + power-supply = <&panel_reg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + panel_input: endpoint@0 { + reg = <0>; + remote-endpoint = <&hlcdc_panel_output>; + }; + }; + }; + + panel_reg: panel_regulator { + compatible = "regulator-fixed"; + regulator-name = "panel-power-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/atlas7-evb.dts b/arch/arm/boot/dts/atlas7-evb.dts index 49cf59a95572..1e9cd1a8508e 100644 --- a/arch/arm/boot/dts/atlas7-evb.dts +++ b/arch/arm/boot/dts/atlas7-evb.dts @@ -10,6 +10,9 @@ /include/ "atlas7.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> + / { model = "CSR SiRFatlas7 Evaluation Board"; compatible = "sirf,atlas7-cb", "sirf,atlas7"; @@ -106,5 +109,20 @@ }; }; }; + + gpio_keys { + compatible = "gpio-keys"; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + rearview_key { + label = "rearview key"; + linux,code = <KEY_CAMERA>; + gpios = <&gpio_1 3 GPIO_ACTIVE_LOW>; + debounce_interval = <100>; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/atlas7.dtsi b/arch/arm/boot/dts/atlas7.dtsi index 3e21311f9514..83449b33de6b 100644 --- a/arch/arm/boot/dts/atlas7.dtsi +++ b/arch/arm/boot/dts/atlas7.dtsi @@ -21,6 +21,10 @@ serial5 = &uart5; serial6 = &uart6; serial9 = &usp2; + spi1 = &spi1; + spi2 = &usp1; + spi3 = &usp2; + spi4 = &usp3; }; cpus { #address-cells = <1>; @@ -53,6 +57,11 @@ }; }; + arm-pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <0 29 4>, <0 82 4>; + }; + noc { compatible = "simple-bus"; #address-cells = <1>; @@ -1205,7 +1214,8 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0x18641000 0x18641000 0x3000>, - <0x18620000 0x18620000 0x1000>; + <0x18620000 0x18620000 0x1000>, + <0x18630000 0x18630000 0x10000>; cgum@18641000 { compatible = "sirf,nocfw-cgum"; @@ -1218,6 +1228,15 @@ #clock-cells = <1>; #reset-cells = <1>; }; + pwm: pwm@18630000 { + compatible = "sirf,prima2-pwm"; + #pwm-cells = <2>; + reg = <0x18630000 0x10000>; + clocks = <&car 138>, <&car 139>, <&car 237>, + <&car 240>, <&car 140>, <&car 246>; + clock-names = "pwmc", "sigsrc0", "sigsrc1", + "sigsrc2", "sigsrc3", "sigsrc4"; + }; }; gnssm { @@ -1231,6 +1250,7 @@ <0x18040000 0x18040000 0x1000>, <0x18050000 0x18050000 0x1000>, <0x18060000 0x18060000 0x1000>, + <0x180b0000 0x180b0000 0x4000>, <0x18100000 0x18100000 0x3000>, <0x18250000 0x18250000 0x10000>, <0x18200000 0x18200000 0x1000>; @@ -1314,6 +1334,18 @@ dma-names = "rx", "tx"; status = "disabled"; }; + gmac: eth@180b0000 { + compatible = "snps, dwc-eth-qos"; + reg = <0x180b0000 0x4000>; + interrupts = <0 59 0>, <0 70 0>; + interrupt-names = "macirq", "macpmt"; + clocks = <&car 39>, <&car 45>, + <&car 86>, <&car 87>; + clock-names = "gnssm_rgmii", "gnssm_gmac", + "rgmii", "gmac"; + local-mac-address = [00 00 00 00 00 00]; + phy-mode = "rgmii"; + }; dspub@18250000 { compatible = "dx,cc44p"; reg = <0x18250000 0x10000>; @@ -1338,18 +1370,51 @@ compatible = "arteris, flexnoc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0x13000000 0x13000000 0x3000>; + ranges = <0x13000000 0x13000000 0x3000>, + <0x13010000 0x13010000 0x1400>, + <0x13010800 0x13010800 0x100>, + <0x13011000 0x13011000 0x100>; gpum@0x13000000 { compatible = "sirf,nocfw-gpum"; reg = <0x13000000 0x3000>; }; + dmacsdrr: dma-controller@13010800 { + cell-index = <5>; + compatible = "sirf,atlas7-dmac-v2"; + reg = <0x13010800 0x100>; + interrupts = <0 8 0>; + clocks = <&car 127>; + #dma-cells = <1>; + #dma-channels = <1>; + }; + dmacsdrw: dma-controller@13011000 { + cell-index = <6>; + compatible = "sirf,atlas7-dmac-v2"; + reg = <0x13011000 0x100>; + interrupts = <0 9 0>; + clocks = <&car 127>; + #dma-cells = <1>; + #dma-channels = <1>; + }; + sdr@0x13010000 { + compatible = "sirf,atlas7-sdr"; + reg = <0x13010000 0x1400>; + interrupts = <0 7 0>, + <0 8 0>, + <0 9 0>; + clocks = <&car 127>; + dmas = <&dmacsdrr 0>, <&dmacsdrw 0>; + dma-names = "tx", "rx"; + }; }; mediam { compatible = "arteris, flexnoc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0x16000000 0x16000000 0x00200000>, + ranges = <0x15000000 0x15000000 0x00600000>, + <0x16000000 0x16000000 0x00200000>, + <0x17000000 0x17000000 0x10000>, <0x17020000 0x17020000 0x1000>, <0x17030000 0x17030000 0x1000>, <0x17040000 0x17040000 0x1000>, @@ -1360,6 +1425,13 @@ <0x17070200 0x17070200 0x100>, <0x170A0000 0x170A0000 0x3000>; + multimedia@15000000 { + compatible = "sirf,atlas7-video-codec"; + reg = <0x15000000 0x10000>; + interrupts = <0 5 0>; + clocks = <&car 102>; + }; + mediam@170A0000 { compatible = "sirf,nocfw-mediam"; reg = <0x170A0000 0x3000>; @@ -1386,6 +1458,8 @@ nand@17050000 { compatible = "sirf,atlas7-nand"; reg = <0x17050000 0x10000>; + pinctrl-names = "default"; + pinctrl-0 = <&nd_df_pmx>; interrupts = <0 41 0>; clocks = <&car 108>, <&car 112>; clock-names = "nand_io", "nand_nand"; @@ -1416,6 +1490,14 @@ bus-width = <8>; }; + jpeg@17000000 { + compatible = "sirf,atlas7-jpeg"; + reg = <0x17000000 0x10000>; + interrupts = <0 72 0>, + <0 73 0>; + clocks = <&car 103>; + }; + usb0: usb@17060000 { cell-index = <0>; compatible = "sirf,atlas7-usb"; @@ -1826,7 +1908,8 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0x13100000 0x13100000 0x20000>, - <0x10e10000 0x10e10000 0x10000>; + <0x10e10000 0x10e10000 0x10000>, + <0x17010000 0x17010000 0x10000>; lcd@13100000 { compatible = "sirf,atlas7-lcdc"; @@ -1848,6 +1931,12 @@ clocks = <&car 54>; resets = <&car 29>; }; + g2d@17010000 { + compatible = "sirf, atlas7-g2d"; + reg = <0x17010000 0x10000>; + interrupts = <0 61 0>; + clocks = <&car 104>; + }; }; diff --git a/arch/arm/boot/dts/axp152.dtsi b/arch/arm/boot/dts/axp152.dtsi new file mode 100644 index 000000000000..f90ad6c64a07 --- /dev/null +++ b/arch/arm/boot/dts/axp152.dtsi @@ -0,0 +1,49 @@ +/* + * Copyright 2015 Chen-Yu Tsai + * + * Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +&axp152 { + compatible = "x-powers,axp152"; + interrupt-controller; + #interrupt-cells = <1>; +}; diff --git a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi index 60d8389fdb6c..32bcd45ef22b 100644 --- a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi @@ -36,56 +36,89 @@ clocks { ranges; osc: oscillator { + #clock-cells = <0>; compatible = "fixed-clock"; - #clock-cells = <1>; clock-frequency = <25000000>; }; - apb_clk: apb_clk { - compatible = "fixed-clock"; + /* Cygnus ARM PLL */ + armpll: armpll { #clock-cells = <0>; - clock-frequency = <1000000000>; + compatible = "brcm,cygnus-armpll"; + clocks = <&osc>; + reg = <0x19000000 0x1000>; }; - periph_clk: periph_clk { - compatible = "fixed-clock"; + /* peripheral clock for system timer */ + periph_clk: arm_periph_clk { #clock-cells = <0>; - clock-frequency = <500000000>; + compatible = "fixed-factor-clock"; + clocks = <&armpll>; + clock-div = <2>; + clock-mult = <1>; }; - sdio_clk: lcpll_ch2 { - compatible = "fixed-clock"; + /* APB bus clock */ + apb_clk: apb_clk { #clock-cells = <0>; - clock-frequency = <200000000>; + compatible = "fixed-factor-clock"; + clocks = <&armpll>; + clock-div = <4>; + clock-mult = <1>; }; - axi81_clk: axi81_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <100000000>; + genpll: genpll { + #clock-cells = <1>; + compatible = "brcm,cygnus-genpll"; + reg = <0x0301d000 0x2c>, <0x0301c020 0x4>; + clocks = <&osc>; + clock-output-names = "genpll", "axi21", "250mhz", "ihost_sys", + "enet_sw", "audio_125", "can"; }; - keypad_clk: keypad_clk { - compatible = "fixed-clock"; + /* always 1/2 of the axi21 clock */ + axi41_clk: axi41_clk { #clock-cells = <0>; - clock-frequency = <31806>; + compatible = "fixed-factor-clock"; + clocks = <&genpll 1>; + clock-div = <2>; + clock-mult = <1>; }; - adc_clk: adc_clk { - compatible = "fixed-clock"; + /* always 1/4 of the axi21 clock */ + axi81_clk: axi81_clk { #clock-cells = <0>; - clock-frequency = <1562500>; + compatible = "fixed-factor-clock"; + clocks = <&genpll 1>; + clock-div = <4>; + clock-mult = <1>; }; - pwm_clk: pwm_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <1000000>; + lcpll0: lcpll0 { + #clock-cells = <1>; + compatible = "brcm,cygnus-lcpll0"; + reg = <0x0301d02c 0x1c>, <0x0301c020 0x4>; + clocks = <&osc>; + clock-output-names = "lcpll0", "pcie_phy", "ddr_phy", "sdio", + "usb_phy", "smart_card", "ch5"; }; - lcd_clk: mipipll_ch1 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <100000000>; + mipipll: mipipll { + #clock-cells = <1>; + compatible = "brcm,cygnus-mipipll"; + reg = <0x180a9800 0x2c>, <0x0301c020 0x4>, <0x180aa024 0x4>; + clocks = <&osc>; + clock-output-names = "mipipll", "ch0_unused", "ch1_lcd", + "ch2_v3d", "ch3_unused", "ch4_unused", + "ch5_unused"; + }; + + asiu_clks: asiu_clks { + #clock-cells = <1>; + compatible = "brcm,cygnus-asiu-clk"; + reg = <0x0301d048 0xc>, <0x180aa024 0x4>; + + clocks = <&osc>; + clock-output-names = "keypad", "adc/touch", "pwm"; }; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index 46780bb48bbf..ab5474e5d1c8 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -14,6 +14,13 @@ linux,default-trigger = "heartbeat"; }; }; + + soc { + firmware: firmware { + compatible = "raspberrypi,bcm2835-firmware"; + mboxes = <&mailbox>; + }; + }; }; &gpio { diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts index 24f0ab59bf1b..42dcdfb769b2 100644 --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts @@ -135,3 +135,7 @@ }; }; }; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts index f03939311717..f18e80e0b61d 100644 --- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts +++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts @@ -55,3 +55,7 @@ }; }; }; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts index 326ce8f4e49c..64b8d10ccff8 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts @@ -24,16 +24,6 @@ reg = <0x00000000 0x08000000>; }; - chipcommonA { - uart0: serial@0300 { - status = "okay"; - }; - - uart1: serial@0400 { - status = "okay"; - }; - }; - leds { compatible = "gpio-leds"; @@ -92,3 +82,7 @@ }; }; }; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts index d6a033b97c70..64a5e8ab65e0 100644 --- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts +++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts @@ -118,3 +118,7 @@ }; }; }; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts index bb0cb0bfafaf..38f0c00d1aca 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts @@ -122,3 +122,7 @@ }; }; }; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 21fefd4cdc25..6f50f672efbd 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -78,10 +78,20 @@ compatible = "arm,pl310-cache"; reg = <0x2000 0x1000>; cache-unified; + arm,shared-override; + prefetch-data = <1>; + prefetch-instr = <1>; cache-level = <2>; }; }; + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + clocks { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi index 58dcd666257c..3b6b17560687 100644 --- a/arch/arm/boot/dts/bcm7445.dtsi +++ b/arch/arm/boot/dts/bcm7445.dtsi @@ -109,6 +109,20 @@ brcm,int-fwd-mask = <0x70000>; }; + irq0_aon_intc: interrupt-controller@417280 { + compatible = "brcm,bcm7120-l2-intc"; + reg = <0x417280 0x8>; + interrupt-parent = <&gic>; + #interrupt-cells = <1>; + interrupt-controller; + interrupts = <GIC_SPI 0x46 0x0>, + <GIC_SPI 0x44 0x0>, + <GIC_SPI 0x49 0x0>; + brcm,int-map-mask = <0x1e3 0x18000000 0x100000>; + brcm,int-fwd-mask = <0x0>; + brcm,irq-can-wake; + }; + hif_intr2_intc: interrupt-controller@3e1000 { compatible = "brcm,l2-intc"; reg = <0x3e1000 0x30>; @@ -119,6 +133,16 @@ interrupt-names = "hif"; }; + aon_pm_l2_intc: interrupt-controller@410640 { + compatible = "brcm,l2-intc"; + reg = <0x410640 0x30>; + interrupt-controller; + #interrupt-cells = <1>; + interrupts = <GIC_SPI 0x40 0x0>; + interrupt-parent = <&gic>; + brcm,irq-can-wake; + }; + nand: nand@3e2800 { status = "disabled"; #address-cells = <1>; @@ -167,6 +191,32 @@ #phy-cells = <0>; }; }; + + upg_gio: gpio@40a700 { + compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio"; + reg = <0x40a700 0x80>; + #gpio-cells = <2>; + #interrupt-cells = <2>; + gpio-controller; + interrupt-controller; + interrupt-parent = <&irq0_intc>; + interrupts = <6>; + brcm,gpio-bank-widths = <32 32 32 24>; + }; + + upg_gio_aon: gpio@4172c0 { + compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio"; + reg = <0x4172c0 0x40>; + #gpio-cells = <2>; + #interrupt-cells = <2>; + gpio-controller; + interrupt-controller; + interrupts-extended = <&irq0_aon_intc 0x6>, + <&aon_pm_l2_intc 0x5>; + wakeup-source; + brcm,gpio-bank-widths = <18 4>; + }; + }; smpboot { diff --git a/arch/arm/boot/dts/cros-ec-sbs.dtsi b/arch/arm/boot/dts/cros-ec-sbs.dtsi new file mode 100644 index 000000000000..71f5c5ecce46 --- /dev/null +++ b/arch/arm/boot/dts/cros-ec-sbs.dtsi @@ -0,0 +1,52 @@ +/* + * Smart battery dts fragment for devices that use cros-ec-sbs + * + * Copyright (c) 2015 Google, Inc + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +&i2c_tunnel { + battery: sbs-battery@b { + compatible = "sbs,sbs-battery"; + reg = <0xb>; + sbs,i2c-retry-count = <2>; + sbs,poll-retry-count = <1>; + }; +}; diff --git a/arch/arm/boot/dts/cx92755.dtsi b/arch/arm/boot/dts/cx92755.dtsi index af333261d046..df4c6f1f93f9 100644 --- a/arch/arm/boot/dts/cx92755.dtsi +++ b/arch/arm/boot/dts/cx92755.dtsi @@ -88,6 +88,13 @@ interrupts = <25>; }; + watchdog@f0000fc0 { + compatible = "cnxt,cx92755-wdt"; + reg = <0xf0000fc0 0x8>; + clocks = <&main_clk>; + timeout-sec = <15>; + }; + uc_regs: syscon@f00003a0 { compatible = "cnxt,cx92755-uc", "syscon"; reg = <0xf00003a0 0x10>; diff --git a/arch/arm/boot/dts/cx92755_equinox.dts b/arch/arm/boot/dts/cx92755_equinox.dts index 90d52cc416dc..5da00806c41e 100644 --- a/arch/arm/boot/dts/cx92755_equinox.dts +++ b/arch/arm/boot/dts/cx92755_equinox.dts @@ -64,8 +64,7 @@ }; chosen { - bootargs = "console=ttyS0,115200"; - stdout-path = &uart0; + stdout-path = "serial0:115200n8"; }; }; diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts new file mode 100644 index 000000000000..92bacd3c8fab --- /dev/null +++ b/arch/arm/boot/dts/dm8148-evm.dts @@ -0,0 +1,28 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "dm814x.dtsi" + +/ { + model = "DM8148 EVM"; + compatible = "ti,dm8148-evm", "ti,dm8148"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "mii"; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <1>; + phy-mode = "mii"; +}; diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts new file mode 100644 index 000000000000..8c4bbc7573df --- /dev/null +++ b/arch/arm/boot/dts/dm8148-t410.dts @@ -0,0 +1,28 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "dm814x.dtsi" + +/ { + model = "DM8148 EVM"; + compatible = "hp,t410", "ti,dm8148"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "mii"; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <1>; + phy-mode = "mii"; +}; diff --git a/arch/arm/boot/dts/dm814x-clocks.dtsi b/arch/arm/boot/dts/dm814x-clocks.dtsi new file mode 100644 index 000000000000..ef1e8e7a6cc6 --- /dev/null +++ b/arch/arm/boot/dts/dm814x-clocks.dtsi @@ -0,0 +1,109 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&scm_clocks { + + tclkin_ck: tclkin_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + devosc_ck: devosc_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <20000000>; + }; + + /* Optional auxosc, 20 - 30 MHz range, assume 27 MHz by default */ + auxosc_ck: auxosc_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <27000000>; + }; + + mpu_ck: mpu_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <1000000000>; + }; + + sysclk4_ck: sysclk4_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <222000000>; + }; + + sysclk6_ck: sysclk6_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <100000000>; + }; + + sysclk10_ck: sysclk10_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <48000000>; + }; + + sysclk18_ck: sysclk18_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + cpsw_125mhz_gclk: cpsw_125mhz_gclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <125000000>; + }; + + cpsw_cpts_rft_clk: cpsw_cpts_rft_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <250000000>; + }; + +}; + +&pllss_clocks { + + aud_clkin0_ck: aud_clkin0_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <20000000>; + }; + + aud_clkin1_ck: aud_clkin1_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <20000000>; + }; + + aud_clkin2_ck: aud_clkin2_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <20000000>; + }; + + timer1_mux_ck: timer1_mux_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck + &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>; + ti,bit-shift = <3>; + reg = <0x2e0>; + }; + + timer2_mux_ck: timer2_mux_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck + &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>; + ti,bit-shift = <6>; + reg = <0x2e0>; + }; +}; diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi new file mode 100644 index 000000000000..972c9c9e885b --- /dev/null +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -0,0 +1,333 @@ +/* + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/omap.h> + +#include "skeleton.dtsi" + +/ { + compatible = "ti,dm814"; + interrupt-parent = <&intc>; + + aliases { + i2c0 = &i2c1; + i2c1 = &i2c2; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + ethernet0 = &cpsw_emac0; + ethernet1 = &cpsw_emac1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + compatible = "arm,cortex-a8"; + device_type = "cpu"; + reg = <0>; + }; + }; + + pmu { + compatible = "arm,cortex-a8-pmu"; + interrupts = <3>; + }; + + /* + * The soc node represents the soc top level view. It is used for IPs + * that are not memory mapped in the MPU view or for the MPU itself. + */ + soc { + compatible = "ti,omap-infra"; + mpu { + compatible = "ti,omap3-mpu"; + ti,hwmods = "mpu"; + }; + }; + + ocp { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "l3_main"; + + /* + * See TRM "Table 1-317. L4LS Instance Summary", just deduct + * 0x1000 from the 1-317 addresses to get the device address + */ + l4ls: l4ls@48000000 { + compatible = "ti,dm814-l4ls", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x48000000 0x2000000>; + + i2c1: i2c@28000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c1"; + reg = <0x28000 0x1000>; + interrupts = <70>; + }; + + elm: elm@80000 { + compatible = "ti,814-elm"; + ti,hwmods = "elm"; + reg = <0x80000 0x2000>; + interrupts = <4>; + }; + + gpio1: gpio@32000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio1"; + ti,gpio-always-on; + reg = <0x32000 0x2000>; + interrupts = <96>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@4c000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio2"; + ti,gpio-always-on; + reg = <0x4c000 0x2000>; + interrupts = <98>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + i2c2: i2c@2a000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c2"; + reg = <0x2a000 0x1000>; + interrupts = <71>; + }; + + mcspi1: spi@30000 { + compatible = "ti,omap4-mcspi"; + reg = <0x30000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <65>; + ti,spi-num-cs = <4>; + ti,hwmods = "mcspi1"; + dmas = <&edma 16 &edma 17 + &edma 18 &edma 19>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + }; + + timer1: timer@2e000 { + compatible = "ti,dm814-timer"; + reg = <0x2e000 0x2000>; + interrupts = <67>; + ti,hwmods = "timer1"; + ti,timer-alwon; + }; + + uart1: uart@20000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart1"; + reg = <0x20000 0x2000>; + clock-frequency = <48000000>; + interrupts = <72>; + dmas = <&edma 26 &edma 27>; + dma-names = "tx", "rx"; + }; + + uart2: uart@22000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart2"; + reg = <0x22000 0x2000>; + clock-frequency = <48000000>; + interrupts = <73>; + dmas = <&edma 28 &edma 29>; + dma-names = "tx", "rx"; + }; + + uart3: uart@24000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart3"; + reg = <0x24000 0x2000>; + clock-frequency = <48000000>; + interrupts = <74>; + dmas = <&edma 30 &edma 31>; + dma-names = "tx", "rx"; + }; + + timer2: timer@40000 { + compatible = "ti,dm814-timer"; + reg = <0x40000 0x2000>; + interrupts = <68>; + ti,hwmods = "timer2"; + }; + + timer3: timer@42000 { + compatible = "ti,dm814-timer"; + reg = <0x42000 0x2000>; + interrupts = <69>; + ti,hwmods = "timer3"; + }; + + control: control@160000 { + compatible = "ti,dm814-scm", "simple-bus"; + reg = <0x160000 0x16d000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x160000 0x16d000>; + + scm_conf: scm_conf@0 { + compatible = "syscon"; + reg = <0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + + scm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + scm_clockdomains: clockdomains { + }; + }; + + pincntl: pinmux@800 { + compatible = "pinctrl-single"; + reg = <0x800 0xc38>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x300ff>; + }; + }; + + prcm: prcm@180000 { + compatible = "ti,dm814-prcm", "simple-bus"; + reg = <0x180000 0x4000>; + + prcm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + prcm_clockdomains: clockdomains { + }; + }; + + pllss: pllss@1c5000 { + compatible = "ti,dm814-pllss", "simple-bus"; + reg = <0x1c5000 0x2000>; + + pllss_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + pllss_clockdomains: clockdomains { + }; + }; + + wdt1: wdt@1c7000 { + compatible = "ti,omap3-wdt"; + ti,hwmods = "wd_timer"; + reg = <0x1c7000 0x1000>; + interrupts = <91>; + }; + }; + + intc: interrupt-controller@48200000 { + compatible = "ti,dm814-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x48200000 0x1000>; + }; + + edma: edma@49000000 { + compatible = "ti,edma3"; + ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2"; + reg = <0x49000000 0x10000>, + <0x44e10f90 0x40>; + interrupts = <12 13 14>; + #dma-cells = <1>; + }; + + /* See TRM "Table 1-318. L4HS Instance Summary" */ + l4hs: l4hs@4a000000 { + compatible = "ti,dm814-l4hs", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4a000000 0x1b4040>; + }; + + /* REVISIT: Move to live under l4hs once driver is fixed */ + mac: ethernet@4a100000 { + compatible = "ti,cpsw"; + ti,hwmods = "cpgmac0"; + clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>; + clock-names = "fck", "cpts"; + cpdma_channels = <8>; + ale_entries = <1024>; + bd_ram_size = <0x2000>; + no_bd_ram = <0>; + rx_descs = <64>; + mac_control = <0x20>; + slaves = <2>; + active_slave = <0>; + cpts_clock_mult = <0x80000000>; + cpts_clock_shift = <29>; + reg = <0x4a100000 0x800 + 0x4a100900 0x100>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + /* + * c0_rx_thresh_pend + * c0_rx_pend + * c0_tx_pend + * c0_misc_pend + */ + interrupts = <40 41 42 43>; + ranges; + syscon = <&scm_conf>; + + davinci_mdio: mdio@4a100800 { + compatible = "ti,davinci_mdio"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "davinci_mdio"; + bus_freq = <1000000>; + reg = <0x4a100800 0x100>; + }; + + cpsw_emac0: slave@4a100200 { + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + + cpsw_emac1: slave@4a100300 { + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + + phy_sel: cpsw-phy-sel@0x48160650 { + compatible = "ti,am3352-cpsw-phy-sel"; + reg= <0x48160650 0x4>; + reg-names = "gmii-sel"; + }; + }; + }; +}; + +#include "dm814x-clocks.dtsi" diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index 289806adb343..3c99cfa1a876 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -58,7 +58,7 @@ * the whole bus hierarchy. */ ocp { - compatible = "ti,omap3-l3-smx", "simple-bus"; + compatible = "simple-bus"; reg = <0x44000000 0x10000>; interrupts = <9 10>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 38b1f7e6004e..179121630ad7 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -419,293 +419,325 @@ status = "disabled"; }; - thermal: thermal-diode@d001c { - compatible = "marvell,dove-thermal"; - reg = <0xd001c 0x0c>, <0xd005c 0x08>; - }; - - gate_clk: clock-gating-ctrl@d0038 { - compatible = "marvell,dove-gating-clock"; - reg = <0xd0038 0x4>; - clocks = <&core_clk 0>; - #clock-cells = <1>; - }; - - pinctrl: pin-ctrl@d0200 { - compatible = "marvell,dove-pinctrl"; - reg = <0xd0200 0x14>, - <0xd0440 0x04>; - clocks = <&gate_clk 22>; - - pmx_gpio_0: pmx-gpio-0 { - marvell,pins = "mpp0"; - marvell,function = "gpio"; - }; - - pmx_gpio_1: pmx-gpio-1 { - marvell,pins = "mpp1"; - marvell,function = "gpio"; - }; - - pmx_gpio_2: pmx-gpio-2 { - marvell,pins = "mpp2"; - marvell,function = "gpio"; - }; - - pmx_gpio_3: pmx-gpio-3 { - marvell,pins = "mpp3"; - marvell,function = "gpio"; - }; - - pmx_gpio_4: pmx-gpio-4 { - marvell,pins = "mpp4"; - marvell,function = "gpio"; - }; - - pmx_gpio_5: pmx-gpio-5 { - marvell,pins = "mpp5"; - marvell,function = "gpio"; - }; - - pmx_gpio_6: pmx-gpio-6 { - marvell,pins = "mpp6"; - marvell,function = "gpio"; - }; - - pmx_gpio_7: pmx-gpio-7 { - marvell,pins = "mpp7"; - marvell,function = "gpio"; - }; - - pmx_gpio_8: pmx-gpio-8 { - marvell,pins = "mpp8"; - marvell,function = "gpio"; - }; - - pmx_gpio_9: pmx-gpio-9 { - marvell,pins = "mpp9"; - marvell,function = "gpio"; - }; - - pmx_pcie1_clkreq: pmx-pcie1-clkreq { - marvell,pins = "mpp9"; - marvell,function = "pex1"; - }; - - pmx_gpio_10: pmx-gpio-10 { - marvell,pins = "mpp10"; - marvell,function = "gpio"; - }; - - pmx_gpio_11: pmx-gpio-11 { - marvell,pins = "mpp11"; - marvell,function = "gpio"; - }; - - pmx_pcie0_clkreq: pmx-pcie0-clkreq { - marvell,pins = "mpp11"; - marvell,function = "pex0"; - }; - - pmx_gpio_12: pmx-gpio-12 { - marvell,pins = "mpp12"; - marvell,function = "gpio"; - }; - - pmx_gpio_13: pmx-gpio-13 { - marvell,pins = "mpp13"; - marvell,function = "gpio"; - }; - - pmx_audio1_extclk: pmx-audio1-extclk { - marvell,pins = "mpp13"; - marvell,function = "audio1"; - }; - - pmx_gpio_14: pmx-gpio-14 { - marvell,pins = "mpp14"; - marvell,function = "gpio"; - }; - - pmx_gpio_15: pmx-gpio-15 { - marvell,pins = "mpp15"; - marvell,function = "gpio"; - }; - - pmx_gpio_16: pmx-gpio-16 { - marvell,pins = "mpp16"; - marvell,function = "gpio"; - }; - - pmx_gpio_17: pmx-gpio-17 { - marvell,pins = "mpp17"; - marvell,function = "gpio"; - }; - - pmx_gpio_18: pmx-gpio-18 { - marvell,pins = "mpp18"; - marvell,function = "gpio"; - }; - - pmx_gpio_19: pmx-gpio-19 { - marvell,pins = "mpp19"; - marvell,function = "gpio"; - }; - - pmx_gpio_20: pmx-gpio-20 { - marvell,pins = "mpp20"; - marvell,function = "gpio"; - }; - - pmx_gpio_21: pmx-gpio-21 { - marvell,pins = "mpp21"; - marvell,function = "gpio"; - }; - - pmx_camera: pmx-camera { - marvell,pins = "mpp_camera"; - marvell,function = "camera"; - }; - - pmx_camera_gpio: pmx-camera-gpio { - marvell,pins = "mpp_camera"; - marvell,function = "gpio"; - }; - - pmx_sdio0: pmx-sdio0 { - marvell,pins = "mpp_sdio0"; - marvell,function = "sdio0"; - }; - - pmx_sdio0_gpio: pmx-sdio0-gpio { - marvell,pins = "mpp_sdio0"; - marvell,function = "gpio"; - }; - - pmx_sdio1: pmx-sdio1 { - marvell,pins = "mpp_sdio1"; - marvell,function = "sdio1"; - }; - - pmx_sdio1_gpio: pmx-sdio1-gpio { - marvell,pins = "mpp_sdio1"; - marvell,function = "gpio"; - }; - - pmx_audio1_gpio: pmx-audio1-gpio { - marvell,pins = "mpp_audio1"; - marvell,function = "gpio"; - }; - - pmx_audio1_i2s1_spdifo: pmx-audio1-i2s1-spdifo { - marvell,pins = "mpp_audio1"; - marvell,function = "i2s1/spdifo"; - }; - - pmx_spi0: pmx-spi0 { - marvell,pins = "mpp_spi0"; - marvell,function = "spi0"; - }; - - pmx_spi0_gpio: pmx-spi0-gpio { - marvell,pins = "mpp_spi0"; - marvell,function = "gpio"; - }; - - pmx_spi1_4_7: pmx-spi1-4-7 { - marvell,pins = "mpp4", "mpp5", - "mpp6", "mpp7"; - marvell,function = "spi1"; - }; - - pmx_spi1_20_23: pmx-spi1-20-23 { - marvell,pins = "mpp20", "mpp21", - "mpp22", "mpp23"; - marvell,function = "spi1"; - }; - - pmx_uart1: pmx-uart1 { - marvell,pins = "mpp_uart1"; - marvell,function = "uart1"; - }; - - pmx_uart1_gpio: pmx-uart1-gpio { - marvell,pins = "mpp_uart1"; - marvell,function = "gpio"; - }; - - pmx_nand: pmx-nand { - marvell,pins = "mpp_nand"; - marvell,function = "nand"; - }; - - pmx_nand_gpo: pmx-nand-gpo { - marvell,pins = "mpp_nand"; - marvell,function = "gpo"; - }; - - pmx_i2c1: pmx-i2c1 { - marvell,pins = "mpp17", "mpp19"; - marvell,function = "twsi"; - }; - - pmx_i2c2: pmx-i2c2 { - marvell,pins = "mpp_audio1"; - marvell,function = "twsi"; - }; - - pmx_ssp_i2c2: pmx-ssp-i2c2 { - marvell,pins = "mpp_audio1"; - marvell,function = "ssp/twsi"; - }; - - pmx_i2cmux_0: pmx-i2cmux-0 { - marvell,pins = "twsi"; - marvell,function = "twsi-opt1"; - }; - - pmx_i2cmux_1: pmx-i2cmux-1 { - marvell,pins = "twsi"; - marvell,function = "twsi-opt2"; - }; - - pmx_i2cmux_2: pmx-i2cmux-2 { - marvell,pins = "twsi"; - marvell,function = "twsi-opt3"; - }; - }; - - core_clk: core-clocks@d0214 { - compatible = "marvell,dove-core-clock"; - reg = <0xd0214 0x4>; - #clock-cells = <1>; - }; - - gpio0: gpio-ctrl@d0400 { - compatible = "marvell,orion-gpio"; - #gpio-cells = <2>; - gpio-controller; - reg = <0xd0400 0x20>; - ngpios = <32>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <12>, <13>, <14>, <60>; - }; - - gpio1: gpio-ctrl@d0420 { - compatible = "marvell,orion-gpio"; - #gpio-cells = <2>; - gpio-controller; - reg = <0xd0420 0x20>; - ngpios = <32>; + pmu: power-management@d0000 { + compatible = "marvell,dove-pmu", "simple-bus"; + reg = <0xd0000 0x8000>, <0xd8000 0x8000>; + ranges = <0x00000000 0x000d0000 0x8000 + 0x00008000 0x000d8000 0x8000>; + interrupts = <33>; interrupt-controller; - #interrupt-cells = <2>; - interrupts = <61>; - }; - - rtc: real-time-clock@d8500 { - compatible = "marvell,orion-rtc"; - reg = <0xd8500 0x20>; + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <1>; + #reset-cells = <1>; + + domains { + vpu_domain: vpu-domain { + #power-domain-cells = <0>; + marvell,pmu_pwr_mask = <0x00000008>; + marvell,pmu_iso_mask = <0x00000001>; + resets = <&pmu 16>; + }; + + gpu_domain: gpu-domain { + #power-domain-cells = <0>; + marvell,pmu_pwr_mask = <0x00000004>; + marvell,pmu_iso_mask = <0x00000002>; + resets = <&pmu 18>; + }; + }; + + thermal: thermal-diode@001c { + compatible = "marvell,dove-thermal"; + reg = <0x001c 0x0c>, <0x005c 0x08>; + }; + + gate_clk: clock-gating-ctrl@0038 { + compatible = "marvell,dove-gating-clock"; + reg = <0x0038 0x4>; + clocks = <&core_clk 0>; + #clock-cells = <1>; + }; + + pinctrl: pin-ctrl@0200 { + compatible = "marvell,dove-pinctrl"; + reg = <0x0200 0x14>, + <0x0440 0x04>; + clocks = <&gate_clk 22>; + + pmx_gpio_0: pmx-gpio-0 { + marvell,pins = "mpp0"; + marvell,function = "gpio"; + }; + + pmx_gpio_1: pmx-gpio-1 { + marvell,pins = "mpp1"; + marvell,function = "gpio"; + }; + + pmx_gpio_2: pmx-gpio-2 { + marvell,pins = "mpp2"; + marvell,function = "gpio"; + }; + + pmx_gpio_3: pmx-gpio-3 { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + + pmx_gpio_4: pmx-gpio-4 { + marvell,pins = "mpp4"; + marvell,function = "gpio"; + }; + + pmx_gpio_5: pmx-gpio-5 { + marvell,pins = "mpp5"; + marvell,function = "gpio"; + }; + + pmx_gpio_6: pmx-gpio-6 { + marvell,pins = "mpp6"; + marvell,function = "gpio"; + }; + + pmx_gpio_7: pmx-gpio-7 { + marvell,pins = "mpp7"; + marvell,function = "gpio"; + }; + + pmx_gpio_8: pmx-gpio-8 { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; + + pmx_gpio_9: pmx-gpio-9 { + marvell,pins = "mpp9"; + marvell,function = "gpio"; + }; + + pmx_pcie1_clkreq: pmx-pcie1-clkreq { + marvell,pins = "mpp9"; + marvell,function = "pex1"; + }; + + pmx_gpio_10: pmx-gpio-10 { + marvell,pins = "mpp10"; + marvell,function = "gpio"; + }; + + pmx_gpio_11: pmx-gpio-11 { + marvell,pins = "mpp11"; + marvell,function = "gpio"; + }; + + pmx_pcie0_clkreq: pmx-pcie0-clkreq { + marvell,pins = "mpp11"; + marvell,function = "pex0"; + }; + + pmx_gpio_12: pmx-gpio-12 { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + + pmx_gpio_13: pmx-gpio-13 { + marvell,pins = "mpp13"; + marvell,function = "gpio"; + }; + + pmx_audio1_extclk: pmx-audio1-extclk { + marvell,pins = "mpp13"; + marvell,function = "audio1"; + }; + + pmx_gpio_14: pmx-gpio-14 { + marvell,pins = "mpp14"; + marvell,function = "gpio"; + }; + + pmx_gpio_15: pmx-gpio-15 { + marvell,pins = "mpp15"; + marvell,function = "gpio"; + }; + + pmx_gpio_16: pmx-gpio-16 { + marvell,pins = "mpp16"; + marvell,function = "gpio"; + }; + + pmx_gpio_17: pmx-gpio-17 { + marvell,pins = "mpp17"; + marvell,function = "gpio"; + }; + + pmx_gpio_18: pmx-gpio-18 { + marvell,pins = "mpp18"; + marvell,function = "gpio"; + }; + + pmx_gpio_19: pmx-gpio-19 { + marvell,pins = "mpp19"; + marvell,function = "gpio"; + }; + + pmx_gpio_20: pmx-gpio-20 { + marvell,pins = "mpp20"; + marvell,function = "gpio"; + }; + + pmx_gpio_21: pmx-gpio-21 { + marvell,pins = "mpp21"; + marvell,function = "gpio"; + }; + + pmx_camera: pmx-camera { + marvell,pins = "mpp_camera"; + marvell,function = "camera"; + }; + + pmx_camera_gpio: pmx-camera-gpio { + marvell,pins = "mpp_camera"; + marvell,function = "gpio"; + }; + + pmx_sdio0: pmx-sdio0 { + marvell,pins = "mpp_sdio0"; + marvell,function = "sdio0"; + }; + + pmx_sdio0_gpio: pmx-sdio0-gpio { + marvell,pins = "mpp_sdio0"; + marvell,function = "gpio"; + }; + + pmx_sdio1: pmx-sdio1 { + marvell,pins = "mpp_sdio1"; + marvell,function = "sdio1"; + }; + + pmx_sdio1_gpio: pmx-sdio1-gpio { + marvell,pins = "mpp_sdio1"; + marvell,function = "gpio"; + }; + + pmx_audio1_gpio: pmx-audio1-gpio { + marvell,pins = "mpp_audio1"; + marvell,function = "gpio"; + }; + + pmx_audio1_i2s1_spdifo: pmx-audio1-i2s1-spdifo { + marvell,pins = "mpp_audio1"; + marvell,function = "i2s1/spdifo"; + }; + + pmx_spi0: pmx-spi0 { + marvell,pins = "mpp_spi0"; + marvell,function = "spi0"; + }; + + pmx_spi0_gpio: pmx-spi0-gpio { + marvell,pins = "mpp_spi0"; + marvell,function = "gpio"; + }; + + pmx_spi1_4_7: pmx-spi1-4-7 { + marvell,pins = "mpp4", "mpp5", + "mpp6", "mpp7"; + marvell,function = "spi1"; + }; + + pmx_spi1_20_23: pmx-spi1-20-23 { + marvell,pins = "mpp20", "mpp21", + "mpp22", "mpp23"; + marvell,function = "spi1"; + }; + + pmx_uart1: pmx-uart1 { + marvell,pins = "mpp_uart1"; + marvell,function = "uart1"; + }; + + pmx_uart1_gpio: pmx-uart1-gpio { + marvell,pins = "mpp_uart1"; + marvell,function = "gpio"; + }; + + pmx_nand: pmx-nand { + marvell,pins = "mpp_nand"; + marvell,function = "nand"; + }; + + pmx_nand_gpo: pmx-nand-gpo { + marvell,pins = "mpp_nand"; + marvell,function = "gpo"; + }; + + pmx_i2c1: pmx-i2c1 { + marvell,pins = "mpp17", "mpp19"; + marvell,function = "twsi"; + }; + + pmx_i2c2: pmx-i2c2 { + marvell,pins = "mpp_audio1"; + marvell,function = "twsi"; + }; + + pmx_ssp_i2c2: pmx-ssp-i2c2 { + marvell,pins = "mpp_audio1"; + marvell,function = "ssp/twsi"; + }; + + pmx_i2cmux_0: pmx-i2cmux-0 { + marvell,pins = "twsi"; + marvell,function = "twsi-opt1"; + }; + + pmx_i2cmux_1: pmx-i2cmux-1 { + marvell,pins = "twsi"; + marvell,function = "twsi-opt2"; + }; + + pmx_i2cmux_2: pmx-i2cmux-2 { + marvell,pins = "twsi"; + marvell,function = "twsi-opt3"; + }; + }; + + core_clk: core-clocks@0214 { + compatible = "marvell,dove-core-clock"; + reg = <0x0214 0x4>; + #clock-cells = <1>; + }; + + gpio0: gpio-ctrl@0400 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0x0400 0x20>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupts = <12>, <13>, <14>, <60>; + }; + + gpio1: gpio-ctrl@0420 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0x0420 0x20>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupts = <61>; + }; + + rtc: real-time-clock@8500 { + compatible = "marvell,orion-rtc"; + reg = <0x8500 0x20>; + interrupts = <5>; + }; }; gconf: global-config@e802c { diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 096f68be99e2..a6c82e5b64fe 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -19,6 +19,15 @@ reg = <0x80000000 0x60000000>; /* 1536 MB */ }; + evm_3v3_sd: fixedregulator-sd { + compatible = "regulator-fixed"; + regulator-name = "evm_3v3_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>; + }; + mmc2_3v3: fixedregulator-mmc2 { compatible = "regulator-fixed"; regulator-name = "mmc2_3v3"; @@ -349,6 +358,7 @@ regulator-name = "ldo1"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; + regulator-always-on; regulator-boot-on; }; @@ -462,8 +472,14 @@ &mmc1 { status = "okay"; - vmmc-supply = <&ldo1_reg>; + vmmc-supply = <&evm_3v3_sd>; + vmmc_aux-supply = <&ldo1_reg>; bus-width = <4>; + /* + * SDCD signal is not being used here - using the fact that GPIO mode + * is always hardwired. + */ + cd-gpios = <&gpio6 27 0>; }; &mmc2 { diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index b058b3146874..a0d3d4bfe9cb 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -141,7 +141,7 @@ dra7_pmx_core: pinmux@1400 { compatible = "ti,dra7-padconf", "pinctrl-single"; - reg = <0x1400 0x0464>; + reg = <0x1400 0x0468>; #address-cells = <1>; #size-cells = <0>; #interrupt-cells = <1>; @@ -149,6 +149,11 @@ pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0x3fffffff>; }; + + scm_conf1: scm_conf@1c04 { + compatible = "syscon"; + reg = <0x1c04 0x0020>; + }; }; cm_core_aon: cm_core_aon@5000 { @@ -286,16 +291,6 @@ #thermal-sensor-cells = <1>; }; - dra7_ctrl_core: ctrl_core@4a002000 { - compatible = "syscon"; - reg = <0x4a002000 0x6d0>; - }; - - dra7_ctrl_general: tisyscon@4a002e00 { - compatible = "syscon"; - reg = <0x4a002e00 0x7c>; - }; - sdma: dma-controller@4a056000 { compatible = "ti,omap4430-sdma"; reg = <0x4a056000 0x1000>; @@ -308,6 +303,15 @@ dma-requests = <127>; }; + sdma_xbar: dma-router@4a002b78 { + compatible = "ti,dra7-dma-crossbar"; + reg = <0x4a002b78 0xfc>; + #dma-cells = <1>; + dma-requests = <205>; + ti,dma-safe-map = <0>; + dma-masters = <&sdma>; + }; + gpio1: gpio@4ae10000 { compatible = "ti,omap4-gpio"; reg = <0x4ae10000 0x200>; @@ -403,7 +407,7 @@ ti,hwmods = "uart1"; clock-frequency = <48000000>; status = "disabled"; - dmas = <&sdma 49>, <&sdma 50>; + dmas = <&sdma_xbar 49>, <&sdma_xbar 50>; dma-names = "tx", "rx"; }; @@ -414,7 +418,7 @@ ti,hwmods = "uart2"; clock-frequency = <48000000>; status = "disabled"; - dmas = <&sdma 51>, <&sdma 52>; + dmas = <&sdma_xbar 51>, <&sdma_xbar 52>; dma-names = "tx", "rx"; }; @@ -425,7 +429,7 @@ ti,hwmods = "uart3"; clock-frequency = <48000000>; status = "disabled"; - dmas = <&sdma 53>, <&sdma 54>; + dmas = <&sdma_xbar 53>, <&sdma_xbar 54>; dma-names = "tx", "rx"; }; @@ -436,7 +440,7 @@ ti,hwmods = "uart4"; clock-frequency = <48000000>; status = "disabled"; - dmas = <&sdma 55>, <&sdma 56>; + dmas = <&sdma_xbar 55>, <&sdma_xbar 56>; dma-names = "tx", "rx"; }; @@ -447,7 +451,7 @@ ti,hwmods = "uart5"; clock-frequency = <48000000>; status = "disabled"; - dmas = <&sdma 63>, <&sdma 64>; + dmas = <&sdma_xbar 63>, <&sdma_xbar 64>; dma-names = "tx", "rx"; }; @@ -458,7 +462,7 @@ ti,hwmods = "uart6"; clock-frequency = <48000000>; status = "disabled"; - dmas = <&sdma 79>, <&sdma 80>; + dmas = <&sdma_xbar 79>, <&sdma_xbar 80>; dma-names = "tx", "rx"; }; @@ -867,7 +871,7 @@ ti,hwmods = "mmc1"; ti,dual-volt; ti,needs-special-reset; - dmas = <&sdma 61>, <&sdma 62>; + dmas = <&sdma_xbar 61>, <&sdma_xbar 62>; dma-names = "tx", "rx"; status = "disabled"; pbias-supply = <&pbias_mmc_reg>; @@ -879,7 +883,7 @@ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmc2"; ti,needs-special-reset; - dmas = <&sdma 47>, <&sdma 48>; + dmas = <&sdma_xbar 47>, <&sdma_xbar 48>; dma-names = "tx", "rx"; status = "disabled"; }; @@ -890,7 +894,7 @@ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmc3"; ti,needs-special-reset; - dmas = <&sdma 77>, <&sdma 78>; + dmas = <&sdma_xbar 77>, <&sdma_xbar 78>; dma-names = "tx", "rx"; status = "disabled"; }; @@ -901,7 +905,7 @@ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmc4"; ti,needs-special-reset; - dmas = <&sdma 57>, <&sdma 58>; + dmas = <&sdma_xbar 57>, <&sdma_xbar 58>; dma-names = "tx", "rx"; status = "disabled"; }; @@ -1046,14 +1050,14 @@ #size-cells = <0>; ti,hwmods = "mcspi1"; ti,spi-num-cs = <4>; - dmas = <&sdma 35>, - <&sdma 36>, - <&sdma 37>, - <&sdma 38>, - <&sdma 39>, - <&sdma 40>, - <&sdma 41>, - <&sdma 42>; + dmas = <&sdma_xbar 35>, + <&sdma_xbar 36>, + <&sdma_xbar 37>, + <&sdma_xbar 38>, + <&sdma_xbar 39>, + <&sdma_xbar 40>, + <&sdma_xbar 41>, + <&sdma_xbar 42>; dma-names = "tx0", "rx0", "tx1", "rx1", "tx2", "rx2", "tx3", "rx3"; status = "disabled"; @@ -1067,10 +1071,10 @@ #size-cells = <0>; ti,hwmods = "mcspi2"; ti,spi-num-cs = <2>; - dmas = <&sdma 43>, - <&sdma 44>, - <&sdma 45>, - <&sdma 46>; + dmas = <&sdma_xbar 43>, + <&sdma_xbar 44>, + <&sdma_xbar 45>, + <&sdma_xbar 46>; dma-names = "tx0", "rx0", "tx1", "rx1"; status = "disabled"; }; @@ -1083,7 +1087,7 @@ #size-cells = <0>; ti,hwmods = "mcspi3"; ti,spi-num-cs = <2>; - dmas = <&sdma 15>, <&sdma 16>; + dmas = <&sdma_xbar 15>, <&sdma_xbar 16>; dma-names = "tx0", "rx0"; status = "disabled"; }; @@ -1096,7 +1100,7 @@ #size-cells = <0>; ti,hwmods = "mcspi4"; ti,spi-num-cs = <1>; - dmas = <&sdma 70>, <&sdma 71>; + dmas = <&sdma_xbar 70>, <&sdma_xbar 71>; dma-names = "tx0", "rx0"; status = "disabled"; }; @@ -1296,7 +1300,12 @@ usb1: usb@48890000 { compatible = "snps,dwc3"; reg = <0x48890000 0x17000>; - interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "peripheral", + "host", + "otg"; phys = <&usb2_phy1>, <&usb3_phy1>; phy-names = "usb2-phy", "usb3-phy"; tx-fifo-resize; @@ -1319,7 +1328,12 @@ usb2: usb@488d0000 { compatible = "snps,dwc3"; reg = <0x488d0000 0x17000>; - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "peripheral", + "host", + "otg"; phys = <&usb2_phy2>; phy-names = "usb2-phy"; tx-fifo-resize; @@ -1344,7 +1358,12 @@ usb3: usb@48910000 { compatible = "snps,dwc3"; reg = <0x48910000 0x17000>; - interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "peripheral", + "host", + "otg"; tx-fifo-resize; maximum-speed = "high-speed"; dr_mode = "otg"; diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 803738414086..6f6bd98c98df 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -30,6 +30,15 @@ regulator-max-microvolt = <3300000>; }; + evm_3v3_sd: fixedregulator-sd { + compatible = "regulator-fixed"; + regulator-name = "evm_3v3_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>; + }; + extcon_usb1: extcon_usb1 { compatible = "linux,extcon-usb-gpio"; id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>; @@ -286,6 +295,7 @@ regulator-name = "ldo1"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; + regulator-always-on; regulator-boot-on; }; @@ -343,6 +353,12 @@ interrupts = <11 IRQ_TYPE_EDGE_FALLING>; interrupt-controller; #interrupt-cells = <2>; + + cpsw_sel_s0 { + gpio-hog; + gpios = <4 GPIO_ACTIVE_HIGH>; + output-low; + }; }; }; @@ -491,14 +507,15 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins_default>; - - vmmc-supply = <&ldo1_reg>; + vmmc-supply = <&evm_3v3_sd>; + vmmc_aux-supply = <&ldo1_reg>; bus-width = <4>; /* * SDCD signal is not being used here - using the fact that GPIO mode * is a viable alternative */ cd-gpios = <&gpio6 27 0>; + max-frequency = <192000000>; }; &mmc2 { @@ -510,6 +527,7 @@ vmmc-supply = <&evm_3v3>; bus-width = <8>; ti,non-removable; + max-frequency = <192000000>; }; &dra7_pmx_core { @@ -571,9 +589,10 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; + slaves = <1>; }; -&cpsw_emac1 { +&cpsw_emac0 { phy_id = <&davinci_mdio>, <3>; phy-mode = "rgmii"; }; @@ -582,7 +601,6 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; - active_slave = <1>; }; &dcan1 { diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index fa995d0ca1f2..feea98e0a4b5 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -65,7 +65,12 @@ usb4: usb@48950000 { compatible = "snps,dwc3"; reg = <0x48950000 0x17000>; - interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "peripheral", + "host", + "otg"; tx-fifo-resize; maximum-speed = "high-speed"; dr_mode = "otg"; diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts index 1dee0aa4f40c..955c24ee4a8c 100644 --- a/arch/arm/boot/dts/emev2-kzm9d.dts +++ b/arch/arm/boot/dts/emev2-kzm9d.dts @@ -95,6 +95,14 @@ }; }; +&iic0 { + status = "okay"; +}; + +&iic1 { + status = "okay"; +}; + &pfc { uart1_pins: serial@e1030000 { renesas,groups = "uart1_ctrl", "uart1_data"; diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi index bb45694d91bc..edad0c4eea35 100644 --- a/arch/arm/boot/dts/emev2.dtsi +++ b/arch/arm/boot/dts/emev2.dtsi @@ -21,6 +21,8 @@ gpio2 = &gpio2; gpio3 = &gpio3; gpio4 = &gpio4; + i2c0 = &iic0; + i2c1 = &iic1; }; cpus { @@ -66,6 +68,30 @@ clock-frequency = <32768>; #clock-cells = <0>; }; + iic0_sclkdiv: iic0_sclkdiv { + compatible = "renesas,emev2-smu-clkdiv"; + reg = <0x624 0>; + clocks = <&pll3_fo>; + #clock-cells = <0>; + }; + iic0_sclk: iic0_sclk { + compatible = "renesas,emev2-smu-gclk"; + reg = <0x48c 1>; + clocks = <&iic0_sclkdiv>; + #clock-cells = <0>; + }; + iic1_sclkdiv: iic1_sclkdiv { + compatible = "renesas,emev2-smu-clkdiv"; + reg = <0x624 16>; + clocks = <&pll3_fo>; + #clock-cells = <0>; + }; + iic1_sclk: iic1_sclk { + compatible = "renesas,emev2-smu-gclk"; + reg = <0x490 1>; + clocks = <&iic1_sclkdiv>; + #clock-cells = <0>; + }; pll3_fo: pll3_fo { compatible = "fixed-factor-clock"; clocks = <&c32ki>; @@ -234,4 +260,26 @@ interrupt-controller; #interrupt-cells = <2>; }; + + iic0: i2c@e0070000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-emev2"; + reg = <0xe0070000 0x28>; + interrupts = <0 32 IRQ_TYPE_EDGE_RISING>; + clocks = <&iic0_sclk>; + clock-names = "sclk"; + status = "disabled"; + }; + + iic1: i2c@e10a0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-emev2"; + reg = <0xe10a0000 0x28>; + interrupts = <0 33 IRQ_TYPE_EDGE_RISING>; + clocks = <&iic1_sclk>; + clock-names = "sclk"; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 775892b2cc6a..eb379526e234 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -69,66 +69,6 @@ enable-active-high; }; - hsotg@12480000 { - vusb_d-supply = <&ldo3_reg>; - vusb_a-supply = <&ldo8_reg>; - dr_mode = "peripheral"; - status = "okay"; - }; - - sdhci_emmc: sdhci@12510000 { - bus-width = <8>; - non-removable; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>; - pinctrl-names = "default"; - vmmc-supply = <&vemmc_reg>; - status = "okay"; - }; - - sdhci_sd: sdhci@12530000 { - bus-width = <4>; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; - pinctrl-names = "default"; - vmmc-supply = <&ldo5_reg>; - cd-gpios = <&gpx3 4 0>; - cd-inverted; - status = "okay"; - }; - - ehci@12580000 { - status = "okay"; - port@0 { - status = "okay"; - }; - }; - - ohci@12590000 { - status = "okay"; - port@0 { - status = "okay"; - }; - }; - - exynos-usbphy@125B0000 { - status = "okay"; - }; - - serial@13800000 { - status = "okay"; - }; - - serial@13810000 { - status = "okay"; - }; - - serial@13820000 { - status = "okay"; - }; - - serial@13830000 { - status = "okay"; - }; - gpio-keys { compatible = "gpio-keys"; @@ -186,218 +126,6 @@ enable-active-high; }; - i2c@13890000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-slave-addr = <0x10>; - samsung,i2c-max-bus-freq = <100000>; - pinctrl-0 = <&i2c3_bus>; - pinctrl-names = "default"; - status = "okay"; - - tsp@4a { - /* TBD: Atmel maXtouch touchscreen */ - reg = <0x4a>; - }; - }; - - i2c@138B0000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-slave-addr = <0x10>; - samsung,i2c-max-bus-freq = <100000>; - pinctrl-0 = <&i2c5_bus>; - pinctrl-names = "default"; - status = "okay"; - - vdd_arm_reg: pmic@60 { - compatible = "maxim,max8952"; - reg = <0x60>; - - max8952,vid-gpios = <&gpx0 3 0>, <&gpx0 4 0>; - max8952,default-mode = <0>; - max8952,dvs-mode-microvolt = <1250000>, <1200000>, - <1050000>, <950000>; - max8952,sync-freq = <0>; - max8952,ramp-speed = <0>; - - regulator-name = "vdd_arm"; - regulator-min-microvolt = <770000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - }; - - pmic@66 { - compatible = "national,lp3974"; - reg = <0x66>; - - max8998,pmic-buck1-default-dvs-idx = <0>; - max8998,pmic-buck1-dvs-gpios = <&gpx0 5 0>, - <&gpx0 6 0>; - max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>, - <1100000>, <1000000>; - - max8998,pmic-buck2-default-dvs-idx = <0>; - max8998,pmic-buck2-dvs-gpio = <&gpe2 0 0>; - max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>; - - regulators { - ldo2_reg: LDO2 { - regulator-name = "VALIVE_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - ldo3_reg: LDO3 { - regulator-name = "VUSB+MIPI_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - ldo4_reg: LDO4 { - regulator-name = "VADC_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo5_reg: LDO5 { - regulator-name = "VTF_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo6_reg: LDO6 { - regulator-name = "LDO6"; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - }; - - ldo7_reg: LDO7 { - regulator-name = "VLCD+VMIPI_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo8_reg: LDO8 { - regulator-name = "VUSB+VDAC_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - ldo9_reg: LDO9 { - regulator-name = "VCC_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - ldo10_reg: LDO10 { - regulator-name = "VPLL_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo11_reg: LDO11 { - regulator-name = "CAM_AF_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo12_reg: LDO12 { - regulator-name = "PS_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo13_reg: LDO13 { - regulator-name = "VHIC_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - ldo14_reg: LDO14 { - regulator-name = "CAM_I_HOST_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo15_reg: LDO15 { - regulator-name = "CAM_S_DIG+FM33_CORE_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - ldo16_reg: LDO16 { - regulator-name = "CAM_S_ANA_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo17_reg: LDO17 { - regulator-name = "VCC_3.0V_LCD"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - buck1_reg: BUCK1 { - regulator-name = "VINT_1.1V"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - regulator-always-on; - }; - - buck2_reg: BUCK2 { - regulator-name = "VG3D_1.1V"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - }; - - buck3_reg: BUCK3 { - regulator-name = "VCC_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - buck4_reg: BUCK4 { - regulator-name = "VMEM_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - ap32khz_reg: EN32KHz-AP { - regulator-name = "32KHz AP"; - regulator-always-on; - }; - - cp32khz_reg: EN32KHz-CP { - regulator-name = "32KHz CP"; - }; - - vichg_reg: ENVICHG { - regulator-name = "VICHG"; - }; - - safeout1_reg: ESAFEOUT1 { - regulator-name = "SAFEOUT1"; - regulator-always-on; - }; - - safeout2_reg: ESAFEOUT2 { - regulator-name = "SAFEOUT2"; - regulator-boot-on; - }; - }; - }; - }; - spi-lcd { compatible = "spi-gpio"; #address-cells = <1>; @@ -446,27 +174,6 @@ }; }; - fimd: fimd@11c00000 { - pinctrl-0 = <&lcd_clk>, <&lcd_data24>; - pinctrl-names = "default"; - status = "okay"; - samsung,invert-vden; - samsung,invert-vclk; - #address-cells = <1>; - #size-cells = <0>; - port@3 { - reg = <3>; - fimd_dpi_ep: endpoint { - remote-endpoint = <&lcd_ep>; - }; - }; - }; - - pwm@139D0000 { - compatible = "samsung,s5p6440-pwm"; - status = "okay"; - }; - camera { status = "okay"; @@ -526,30 +233,287 @@ pinctrl-names = "default"; status = "okay"; }; +}; - mixer@12C10000 { +&cpu0 { + cpu0-supply = <&vdd_arm_reg>; +}; + +&ehci { + status = "okay"; + port@0 { status = "okay"; }; +}; - hdmi@12D00000 { - hpd-gpio = <&gpx3 7 0>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_hpd>; - hdmi-en-supply = <&hdmi_en>; - vdd-supply = <&ldo3_reg>; - vdd_osc-supply = <&ldo4_reg>; - vdd_pll-supply = <&ldo3_reg>; - ddc = <&hdmi_ddc>; - status = "okay"; +&exynos_usbphy { + status = "okay"; +}; + +&fimd { + pinctrl-0 = <&lcd_clk>, <&lcd_data24>; + pinctrl-names = "default"; + status = "okay"; + samsung,invert-vden; + samsung,invert-vclk; + #address-cells = <1>; + #size-cells = <0>; + port@3 { + reg = <3>; + fimd_dpi_ep: endpoint { + remote-endpoint = <&lcd_ep>; + }; }; +}; - i2c@138E0000 { - status = "okay"; +&hdmi { + hpd-gpio = <&gpx3 7 0>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd>; + hdmi-en-supply = <&hdmi_en>; + vdd-supply = <&ldo3_reg>; + vdd_osc-supply = <&ldo4_reg>; + vdd_pll-supply = <&ldo3_reg>; + ddc = <&hdmi_ddc>; + status = "okay"; +}; + +&hsotg { + vusb_d-supply = <&ldo3_reg>; + vusb_a-supply = <&ldo8_reg>; + dr_mode = "peripheral"; + status = "okay"; +}; + +&i2c_3 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + pinctrl-0 = <&i2c3_bus>; + pinctrl-names = "default"; + status = "okay"; + + tsp@4a { + /* TBD: Atmel maXtouch touchscreen */ + reg = <0x4a>; }; }; -&cpu0 { - cpu0-supply = <&vdd_arm_reg>; +&i2c_5 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + pinctrl-0 = <&i2c5_bus>; + pinctrl-names = "default"; + status = "okay"; + + vdd_arm_reg: pmic@60 { + compatible = "maxim,max8952"; + reg = <0x60>; + + max8952,vid-gpios = <&gpx0 3 0>, <&gpx0 4 0>; + max8952,default-mode = <0>; + max8952,dvs-mode-microvolt = <1250000>, <1200000>, + <1050000>, <950000>; + max8952,sync-freq = <0>; + max8952,ramp-speed = <0>; + + regulator-name = "vdd_arm"; + regulator-min-microvolt = <770000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + pmic@66 { + compatible = "national,lp3974"; + reg = <0x66>; + + max8998,pmic-buck1-default-dvs-idx = <0>; + max8998,pmic-buck1-dvs-gpios = <&gpx0 5 0>, + <&gpx0 6 0>; + max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>, + <1100000>, <1000000>; + + max8998,pmic-buck2-default-dvs-idx = <0>; + max8998,pmic-buck2-dvs-gpio = <&gpe2 0 0>; + max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>; + + regulators { + ldo2_reg: LDO2 { + regulator-name = "VALIVE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "VUSB+MIPI_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "VADC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo5_reg: LDO5 { + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo6_reg: LDO6 { + regulator-name = "LDO6"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + }; + + ldo7_reg: LDO7 { + regulator-name = "VLCD+VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo8_reg: LDO8 { + regulator-name = "VUSB+VDAC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo9_reg: LDO9 { + regulator-name = "VCC_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "VPLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "CAM_AF_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo12_reg: LDO12 { + regulator-name = "PS_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo13_reg: LDO13 { + regulator-name = "VHIC_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo14_reg: LDO14 { + regulator-name = "CAM_I_HOST_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo15_reg: LDO15 { + regulator-name = "CAM_S_DIG+FM33_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo16_reg: LDO16 { + regulator-name = "CAM_S_ANA_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo17_reg: LDO17 { + regulator-name = "VCC_3.0V_LCD"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + buck1_reg: BUCK1 { + regulator-name = "VINT_1.1V"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "VG3D_1.1V"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "VCC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "VMEM_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ap32khz_reg: EN32KHz-AP { + regulator-name = "32KHz AP"; + regulator-always-on; + }; + + cp32khz_reg: EN32KHz-CP { + regulator-name = "32KHz CP"; + }; + + vichg_reg: ENVICHG { + regulator-name = "VICHG"; + }; + + safeout1_reg: ESAFEOUT1 { + regulator-name = "SAFEOUT1"; + regulator-always-on; + }; + + safeout2_reg: ESAFEOUT2 { + regulator-name = "SAFEOUT2"; + regulator-boot-on; + }; + }; + }; +}; + +&i2c_8 { + status = "okay"; +}; + +&mdma1 { + reg = <0x12840000 0x1000>; +}; + +&mixer { + status = "okay"; +}; + +&ohci { + status = "okay"; + port@0 { + status = "okay"; + }; }; &pinctrl_1 { @@ -568,6 +532,42 @@ }; }; -&mdma1 { - reg = <0x12840000 0x1000>; +&pwm { + compatible = "samsung,s5p6440-pwm"; + status = "okay"; +}; + +&sdhci_0 { + bus-width = <8>; + non-removable; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>; + pinctrl-names = "default"; + vmmc-supply = <&vemmc_reg>; + status = "okay"; +}; + +&sdhci_2 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; + pinctrl-names = "default"; + vmmc-supply = <&ldo5_reg>; + cd-gpios = <&gpx3 4 0>; + cd-inverted; + status = "okay"; +}; + +&serial_0 { + status = "okay"; +}; + +&serial_1 { + status = "okay"; +}; + +&serial_2 { + status = "okay"; +}; + +&serial_3 { + status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index afc199d78cb9..884840059018 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -190,6 +190,9 @@ interrupt-parent = <&gpx2>; interrupts = <3 IRQ_TYPE_EDGE_FALLING>; reg = <0x36>; + + maxim,over-heat-temp = <700>; + maxim,over-volt = <4500>; }; }; diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi index 886cfca044ac..880917e508b2 100644 --- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi @@ -12,807 +12,805 @@ * published by the Free Software Foundation. */ -/ { - pinctrl@11400000 { - gpa0: gpa0 { - gpio-controller; - #gpio-cells = <2>; +&pinctrl_0 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpa1: gpa1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpa2: gpa2 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpb0: gpb0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpb1: gpb1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpb2: gpb2 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpb3: gpb3 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpc0: gpc0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpc1: gpc1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpc2: gpc2 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpc3: gpc3 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpd0: gpd0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpd1: gpd1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpy0: gpy0 { - gpio-controller; - #gpio-cells = <2>; - }; - - gpy1: gpy1 { - gpio-controller; - #gpio-cells = <2>; - }; - - gpy2: gpy2 { - gpio-controller; - #gpio-cells = <2>; - }; - - gpy3: gpy3 { - gpio-controller; - #gpio-cells = <2>; - }; - - gpy4: gpy4 { - gpio-controller; - #gpio-cells = <2>; - }; - - gpy5: gpy5 { - gpio-controller; - #gpio-cells = <2>; - }; - - gpy6: gpy6 { - gpio-controller; - #gpio-cells = <2>; - }; - - gpc4: gpc4 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpx0: gpx0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - interrupt-parent = <&combiner>; - #interrupt-cells = <2>; - interrupts = <23 0>, <24 0>, <25 0>, <25 1>, - <26 0>, <26 1>, <27 0>, <27 1>; - }; - - gpx1: gpx1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - interrupt-parent = <&combiner>; - #interrupt-cells = <2>; - interrupts = <28 0>, <28 1>, <29 0>, <29 1>, - <30 0>, <30 1>, <31 0>, <31 1>; - }; - - gpx2: gpx2 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpx3: gpx3 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - uart0_data: uart0-data { - samsung,pins = "gpa0-0", "gpa0-1"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - uart0_fctl: uart0-fctl { - samsung,pins = "gpa0-2", "gpa0-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - i2c2_bus: i2c2-bus { - samsung,pins = "gpa0-6", "gpa0-7"; - samsung,pin-function = <3>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - i2c2_hs_bus: i2c2-hs-bus { - samsung,pins = "gpa0-6", "gpa0-7"; - samsung,pin-function = <4>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - uart2_data: uart2-data { - samsung,pins = "gpa1-0", "gpa1-1"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - uart2_fctl: uart2-fctl { - samsung,pins = "gpa1-2", "gpa1-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - i2c3_bus: i2c3-bus { - samsung,pins = "gpa1-2", "gpa1-3"; - samsung,pin-function = <3>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - i2c3_hs_bus: i2c3-hs-bus { - samsung,pins = "gpa1-2", "gpa1-3"; - samsung,pin-function = <4>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - uart3_data: uart3-data { - samsung,pins = "gpa1-4", "gpa1-4"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - spi0_bus: spi0-bus { - samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - i2c4_bus: i2c4-bus { - samsung,pins = "gpa2-0", "gpa2-1"; - samsung,pin-function = <3>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - i2c5_bus: i2c5-bus { - samsung,pins = "gpa2-2", "gpa2-3"; - samsung,pin-function = <3>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - spi1_bus: spi1-bus { - samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - i2s1_bus: i2s1-bus { - samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3", - "gpb0-4"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - pcm1_bus: pcm1-bus { - samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3", - "gpb0-4"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - ac97_bus: ac97-bus { - samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3", - "gpb0-4"; - samsung,pin-function = <4>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - i2s2_bus: i2s2-bus { - samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3", - "gpb1-4"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - pcm2_bus: pcm2-bus { - samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3", - "gpb1-4"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - spdif_bus: spdif-bus { - samsung,pins = "gpb1-0", "gpb1-1"; - samsung,pin-function = <4>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - spi2_bus: spi2-bus { - samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4"; - samsung,pin-function = <5>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - i2c6_bus: i2c6-bus { - samsung,pins = "gpb1-3", "gpb1-4"; - samsung,pin-function = <4>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - pwm0_out: pwm0-out { - samsung,pins = "gpb2-0"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - pwm1_out: pwm1-out { - samsung,pins = "gpb2-1"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - pwm2_out: pwm2-out { - samsung,pins = "gpb2-2"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - pwm3_out: pwm3-out { - samsung,pins = "gpb2-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - i2c7_bus: i2c7-bus { - samsung,pins = "gpb2-2", "gpb2-3"; - samsung,pin-function = <3>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - i2c0_bus: i2c0-bus { - samsung,pins = "gpb3-0", "gpb3-1"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - i2c1_bus: i2c1-bus { - samsung,pins = "gpb3-2", "gpb3-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - i2c0_hs_bus: i2c0-hs-bus { - samsung,pins = "gpb3-0", "gpb3-1"; - samsung,pin-function = <4>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - i2c1_hs_bus: i2c1-hs-bus { - samsung,pins = "gpb3-2", "gpb3-3"; - samsung,pin-function = <4>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - sd0_clk: sd0-clk { - samsung,pins = "gpc0-0"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <3>; - }; - - sd0_cmd: sd0-cmd { - samsung,pins = "gpc0-1"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <3>; - }; - - sd0_cd: sd0-cd { - samsung,pins = "gpc0-2"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <3>; - }; - - sd0_bus1: sd0-bus-width1 { - samsung,pins = "gpc0-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <3>; - }; - - sd0_bus4: sd0-bus-width4 { - samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5", "gpc0-6"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <3>; - }; - - sd0_bus8: sd0-bus-width8 { - samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <3>; - }; - - sd1_clk: sd1-clk { - samsung,pins = "gpc2-0"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <3>; - }; - - sd1_cmd: sd1-cmd { - samsung,pins = "gpc2-1"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <3>; - }; - - sd1_cd: sd1-cd { - samsung,pins = "gpc2-2"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <3>; - }; - - sd1_bus1: sd1-bus-width1 { - samsung,pins = "gpc2-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <3>; - }; - - sd1_bus4: sd1-bus-width4 { - samsung,pins = "gpc2-3", "gpc2-4", "gpc2-5", "gpc2-6"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <3>; - }; - - sd2_clk: sd2-clk { - samsung,pins = "gpc3-0"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <3>; - }; - - sd2_cmd: sd2-cmd { - samsung,pins = "gpc3-1"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <3>; - }; - - sd2_cd: sd2-cd { - samsung,pins = "gpc3-2"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <3>; - }; - - sd2_bus1: sd2-bus-width1 { - samsung,pins = "gpc3-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <3>; - }; - - sd2_bus4: sd2-bus-width4 { - samsung,pins = "gpc3-3", "gpc3-4", "gpc3-5", "gpc3-6"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <3>; - }; - - sd2_bus8: sd2-bus-width8 { - samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6"; - samsung,pin-function = <3>; - samsung,pin-pud = <3>; - samsung,pin-drv = <3>; - }; - - sd3_clk: sd3-clk { - samsung,pins = "gpc4-0"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <3>; - }; - - sd3_cmd: sd3-cmd { - samsung,pins = "gpc4-1"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <3>; - }; - - sd3_cd: sd3-cd { - samsung,pins = "gpc4-2"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <3>; - }; - - sd3_bus1: sd3-bus-width1 { - samsung,pins = "gpc4-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <3>; - }; - - sd3_bus4: sd3-bus-width4 { - samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <3>; - }; - - uart1_data: uart1-data { - samsung,pins = "gpd0-0", "gpd0-1"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - uart1_fctl: uart1-fctl { - samsung,pins = "gpd0-2", "gpd0-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - dp_hpd: dp_hpd { - samsung,pins = "gpx0-7"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - }; - - pinctrl@13400000 { - gpe0: gpe0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpe1: gpe1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpf0: gpf0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpf1: gpf1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpg0: gpg0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpg1: gpg1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpg2: gpg2 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gph0: gph0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gph1: gph1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - cam_gpio_a: cam-gpio-a { - samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3", - "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7", - "gpe1-0", "gpe1-1"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - cam_gpio_b: cam-gpio-b { - samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3", - "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - cam_i2c2_bus: cam-i2c2-bus { - samsung,pins = "gpe0-6", "gpe1-0"; - samsung,pin-function = <4>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - cam_spi1_bus: cam-spi1-bus { - samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3"; - samsung,pin-function = <4>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - cam_i2c1_bus: cam-i2c1-bus { - samsung,pins = "gpf0-2", "gpf0-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - cam_i2c0_bus: cam-i2c0-bus { - samsung,pins = "gpf0-0", "gpf0-1"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - cam_spi0_bus: cam-spi0-bus { - samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - cam_bayrgb_bus: cam-bayrgb-bus { - samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3", - "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7", - "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3", - "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7", - "gpg2-0", "gpg2-1"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - cam_port_a: cam-port-a { - samsung,pins = "gph0-0", "gph0-1", "gph0-2", "gph0-3", - "gph1-0", "gph1-1", "gph1-2", "gph1-3", - "gph1-4", "gph1-5", "gph1-6", "gph1-7"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - }; - - pinctrl@10d10000 { - gpv0: gpv0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpv1: gpv1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpv2: gpv2 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpv3: gpv3 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpv4: gpv4 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - c2c_rxd: c2c-rxd { - samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3", - "gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7", - "gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3", - "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - c2c_txd: c2c-txd { - samsung,pins = "gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3", - "gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7", - "gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3", - "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - }; - - pinctrl@03860000 { - gpz: gpz { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - i2s0_bus: i2s0-bus { - samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3", - "gpz-4", "gpz-5", "gpz-6"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa2: gpa2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb0: gpb0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb1: gpb1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb2: gpb2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb3: gpb3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc2: gpc2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc3: gpc3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpy0: gpy0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy1: gpy1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy2: gpy2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy3: gpy3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy4: gpy4 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy5: gpy5 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy6: gpy6 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpc4: gpc4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx0: gpx0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&combiner>; + #interrupt-cells = <2>; + interrupts = <23 0>, <24 0>, <25 0>, <25 1>, + <26 0>, <26 1>, <27 0>, <27 1>; + }; + + gpx1: gpx1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&combiner>; + #interrupt-cells = <2>; + interrupts = <28 0>, <28 1>, <29 0>, <29 1>, + <30 0>, <30 1>, <31 0>, <31 1>; + }; + + gpx2: gpx2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx3: gpx3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + uart0_data: uart0-data { + samsung,pins = "gpa0-0", "gpa0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gpa0-2", "gpa0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c2_bus: i2c2-bus { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c2_hs_bus: i2c2-hs-bus { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + uart2_data: uart2-data { + samsung,pins = "gpa1-0", "gpa1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart2_fctl: uart2-fctl { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c3_bus: i2c3-bus { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c3_hs_bus: i2c3-hs-bus { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + uart3_data: uart3-data { + samsung,pins = "gpa1-4", "gpa1-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spi0_bus: spi0-bus { + samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c4_bus: i2c4-bus { + samsung,pins = "gpa2-0", "gpa2-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c5_bus: i2c5-bus { + samsung,pins = "gpa2-2", "gpa2-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi1_bus: spi1-bus { + samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2s1_bus: i2s1-bus { + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3", + "gpb0-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pcm1_bus: pcm1-bus { + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3", + "gpb0-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + ac97_bus: ac97-bus { + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3", + "gpb0-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2s2_bus: i2s2-bus { + samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3", + "gpb1-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pcm2_bus: pcm2-bus { + samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3", + "gpb1-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spdif_bus: spdif-bus { + samsung,pins = "gpb1-0", "gpb1-1"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spi2_bus: spi2-bus { + samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4"; + samsung,pin-function = <5>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c6_bus: i2c6-bus { + samsung,pins = "gpb1-3", "gpb1-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + pwm0_out: pwm0-out { + samsung,pins = "gpb2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm1_out: pwm1-out { + samsung,pins = "gpb2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm2_out: pwm2-out { + samsung,pins = "gpb2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm3_out: pwm3-out { + samsung,pins = "gpb2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c7_bus: i2c7-bus { + samsung,pins = "gpb2-2", "gpb2-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c0_bus: i2c0-bus { + samsung,pins = "gpb3-0", "gpb3-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c1_bus: i2c1-bus { + samsung,pins = "gpb3-2", "gpb3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c0_hs_bus: i2c0-hs-bus { + samsung,pins = "gpb3-0", "gpb3-1"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c1_hs_bus: i2c1-hs-bus { + samsung,pins = "gpb3-2", "gpb3-3"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + sd0_clk: sd0-clk { + samsung,pins = "gpc0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpc0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cd: sd0-cd { + samsung,pins = "gpc0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus1: sd0-bus-width1 { + samsung,pins = "gpc0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus4: sd0-bus-width4 { + samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5", "gpc0-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus8: sd0-bus-width8 { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_clk: sd1-clk { + samsung,pins = "gpc2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_cmd: sd1-cmd { + samsung,pins = "gpc2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_cd: sd1-cd { + samsung,pins = "gpc2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_bus1: sd1-bus-width1 { + samsung,pins = "gpc2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_bus4: sd1-bus-width4 { + samsung,pins = "gpc2-3", "gpc2-4", "gpc2-5", "gpc2-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_clk: sd2-clk { + samsung,pins = "gpc3-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cmd: sd2-cmd { + samsung,pins = "gpc3-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cd: sd2-cd { + samsung,pins = "gpc3-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus1: sd2-bus-width1 { + samsung,pins = "gpc3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus4: sd2-bus-width4 { + samsung,pins = "gpc3-3", "gpc3-4", "gpc3-5", "gpc3-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus8: sd2-bus-width8 { + samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd3_clk: sd3-clk { + samsung,pins = "gpc4-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd3_cmd: sd3-cmd { + samsung,pins = "gpc4-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd3_cd: sd3-cd { + samsung,pins = "gpc4-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd3_bus1: sd3-bus-width1 { + samsung,pins = "gpc4-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd3_bus4: sd3-bus-width4 { + samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + uart1_data: uart1-data { + samsung,pins = "gpd0-0", "gpd0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gpd0-2", "gpd0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + dp_hpd: dp_hpd { + samsung,pins = "gpx0-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_1 { + gpe0: gpe0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe1: gpe1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg0: gpg0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg1: gpg1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg2: gpg2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph0: gph0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph1: gph1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + cam_gpio_a: cam-gpio-a { + samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3", + "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7", + "gpe1-0", "gpe1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + cam_gpio_b: cam-gpio-b { + samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3", + "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + cam_i2c2_bus: cam-i2c2-bus { + samsung,pins = "gpe0-6", "gpe1-0"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + cam_spi1_bus: cam-spi1-bus { + samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + cam_i2c1_bus: cam-i2c1-bus { + samsung,pins = "gpf0-2", "gpf0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + cam_i2c0_bus: cam-i2c0-bus { + samsung,pins = "gpf0-0", "gpf0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + cam_spi0_bus: cam-spi0-bus { + samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + cam_bayrgb_bus: cam-bayrgb-bus { + samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3", + "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7", + "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3", + "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7", + "gpg2-0", "gpg2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + cam_port_a: cam-port-a { + samsung,pins = "gph0-0", "gph0-1", "gph0-2", "gph0-3", + "gph1-0", "gph1-1", "gph1-2", "gph1-3", + "gph1-4", "gph1-5", "gph1-6", "gph1-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_2 { + gpv0: gpv0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv1: gpv1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv2: gpv2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv3: gpv3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv4: gpv4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + c2c_rxd: c2c-rxd { + samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3", + "gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7", + "gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3", + "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + c2c_txd: c2c-txd { + samsung,pins = "gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3", + "gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7", + "gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3", + "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_3 { + gpz: gpz { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + i2s0_bus: i2s0-bus { + samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3", + "gpz-4", "gpz-5", "gpz-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; }; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index bf9bee67c416..4a1f88300a28 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -19,7 +19,6 @@ #include <dt-bindings/clock/exynos5250.h> #include "exynos5.dtsi" -#include "exynos5250-pinctrl.dtsi" #include "exynos4-cpu-thermal.dtsi" #include <dt-bindings/clock/exynos-audss-clk.h> @@ -1062,3 +1061,5 @@ clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; clock-names = "uart", "clk_uart_baud0"; }; + +#include "exynos5250-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts index be3e02530b42..cebeaab3abec 100644 --- a/arch/arm/boot/dts/exynos5410-smdk5410.dts +++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts @@ -62,13 +62,13 @@ }; &uart0 { - status = "okay"; + status = "okay"; }; &uart1 { - status = "okay"; + status = "okay"; }; &uart2 { - status = "okay"; + status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi index 8b153166ebdb..130563b2ca95 100644 --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi @@ -12,711 +12,710 @@ * published by the Free Software Foundation. */ -/ { - pinctrl@13400000 { - gpy7: gpy7 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpx0: gpx0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - interrupt-parent = <&combiner>; - #interrupt-cells = <2>; - interrupts = <23 0>, <24 0>, <25 0>, <25 1>, - <26 0>, <26 1>, <27 0>, <27 1>; - }; - - gpx1: gpx1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - interrupt-parent = <&combiner>; - #interrupt-cells = <2>; - interrupts = <28 0>, <28 1>, <29 0>, <29 1>, - <30 0>, <30 1>, <31 0>, <31 1>; - }; - - gpx2: gpx2 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpx3: gpx3 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - dp_hpd: dp_hpd { - samsung,pins = "gpx0-7"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - }; - - pinctrl@13410000 { - gpc0: gpc0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpc1: gpc1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpc2: gpc2 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpc3: gpc3 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpc4: gpc4 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpd1: gpd1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpy0: gpy0 { - gpio-controller; - #gpio-cells = <2>; - }; - - gpy1: gpy1 { - gpio-controller; - #gpio-cells = <2>; - }; - - gpy2: gpy2 { - gpio-controller; - #gpio-cells = <2>; - }; - - gpy3: gpy3 { - gpio-controller; - #gpio-cells = <2>; - }; - - gpy4: gpy4 { - gpio-controller; - #gpio-cells = <2>; - }; - - gpy5: gpy5 { - gpio-controller; - #gpio-cells = <2>; - }; - - gpy6: gpy6 { - gpio-controller; - #gpio-cells = <2>; - }; - - sd0_clk: sd0-clk { - samsung,pins = "gpc0-0"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <3>; - }; - - sd0_cmd: sd0-cmd { - samsung,pins = "gpc0-1"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <3>; - }; - - sd0_cd: sd0-cd { - samsung,pins = "gpc0-2"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <3>; - }; - - sd0_bus1: sd0-bus-width1 { - samsung,pins = "gpc0-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <3>; - }; - - sd0_bus4: sd0-bus-width4 { - samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <3>; - }; - - sd0_bus8: sd0-bus-width8 { - samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <3>; - }; - - sd1_clk: sd1-clk { - samsung,pins = "gpc1-0"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <3>; - }; - - sd0_rclk: sd0-rclk { - samsung,pins = "gpc0-7"; - samsung,pin-function = <2>; - samsung,pin-pud = <1>; - samsung,pin-drv = <3>; - }; - - sd1_cmd: sd1-cmd { - samsung,pins = "gpc1-1"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <3>; - }; - - sd1_cd: sd1-cd { - samsung,pins = "gpc1-2"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <3>; - }; - - sd1_int: sd1-int { - samsung,pins = "gpd1-1"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - sd1_bus1: sd1-bus-width1 { - samsung,pins = "gpc1-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <3>; - }; - - sd1_bus4: sd1-bus-width4 { - samsung,pins = "gpc1-4", "gpc1-5", "gpc1-6"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <3>; - }; - - sd1_bus8: sd1-bus-width8 { - samsung,pins = "gpd1-4", "gpd1-5", "gpd1-6", "gpd1-7"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <3>; - }; - - sd2_clk: sd2-clk { - samsung,pins = "gpc2-0"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <3>; - }; - - sd2_cmd: sd2-cmd { - samsung,pins = "gpc2-1"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <3>; - }; - - sd2_cd: sd2-cd { - samsung,pins = "gpc2-2"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <3>; - }; - - sd2_bus1: sd2-bus-width1 { - samsung,pins = "gpc2-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <3>; - }; - - sd2_bus4: sd2-bus-width4 { - samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <3>; - }; - }; - - pinctrl@14000000 { - gpe0: gpe0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpe1: gpe1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpf0: gpf0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpf1: gpf1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpg0: gpg0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpg1: gpg1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpg2: gpg2 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpj4: gpj4 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - cam_gpio_a: cam-gpio-a { - samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3", - "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7", - "gpe1-0", "gpe1-1"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - cam_gpio_b: cam-gpio-b { - samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3", - "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - cam_i2c2_bus: cam-i2c2-bus { - samsung,pins = "gpf0-4", "gpf0-5"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - cam_spi1_bus: cam-spi1-bus { - samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3"; - samsung,pin-function = <4>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - cam_i2c1_bus: cam-i2c1-bus { - samsung,pins = "gpf0-2", "gpf0-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - cam_i2c0_bus: cam-i2c0-bus { - samsung,pins = "gpf0-0", "gpf0-1"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - cam_spi0_bus: cam-spi0-bus { - samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - cam_bayrgb_bus: cam-bayrgb-bus { - samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3", - "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7", - "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3", - "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7", - "gpg2-0"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - }; - - pinctrl@14010000 { - gpa0: gpa0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpa1: gpa1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpa2: gpa2 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpb0: gpb0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpb1: gpb1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpb2: gpb2 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpb3: gpb3 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpb4: gpb4 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gph0: gph0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - uart0_data: uart0-data { - samsung,pins = "gpa0-0", "gpa0-1"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - uart0_fctl: uart0-fctl { - samsung,pins = "gpa0-2", "gpa0-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - uart1_data: uart1-data { - samsung,pins = "gpa0-4", "gpa0-5"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - uart1_fctl: uart1-fctl { - samsung,pins = "gpa0-6", "gpa0-7"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - i2c2_bus: i2c2-bus { - samsung,pins = "gpa0-6", "gpa0-7"; - samsung,pin-function = <3>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - uart2_data: uart2-data { - samsung,pins = "gpa1-0", "gpa1-1"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - uart2_fctl: uart2-fctl { - samsung,pins = "gpa1-2", "gpa1-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - i2c3_bus: i2c3-bus { - samsung,pins = "gpa1-2", "gpa1-3"; - samsung,pin-function = <3>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - uart3_data: uart3-data { - samsung,pins = "gpa1-4", "gpa1-5"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - spi0_bus: spi0-bus { - samsung,pins = "gpa2-0", "gpa2-1", "gpa2-2", "gpa2-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - spi1_bus: spi1-bus { - samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - i2c4_hs_bus: i2c4-hs-bus { - samsung,pins = "gpa2-0", "gpa2-1"; - samsung,pin-function = <3>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - i2c5_hs_bus: i2c5-hs-bus { - samsung,pins = "gpa2-2", "gpa2-3"; - samsung,pin-function = <3>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - i2s1_bus: i2s1-bus { - samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3", - "gpb0-4"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - pcm1_bus: pcm1-bus { - samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3", - "gpb0-4"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - i2s2_bus: i2s2-bus { - samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3", - "gpb1-4"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - pcm2_bus: pcm2-bus { - samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3", - "gpb1-4"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - spdif_bus: spdif-bus { - samsung,pins = "gpb1-0", "gpb1-1"; - samsung,pin-function = <4>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - spi2_bus: spi2-bus { - samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4"; - samsung,pin-function = <5>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - i2c6_hs_bus: i2c6-hs-bus { - samsung,pins = "gpb1-3", "gpb1-4"; - samsung,pin-function = <4>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - pwm0_out: pwm0-out { - samsung,pins = "gpb2-0"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - pwm1_out: pwm1-out { - samsung,pins = "gpb2-1"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - pwm2_out: pwm2-out { - samsung,pins = "gpb2-2"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - pwm3_out: pwm3-out { - samsung,pins = "gpb2-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - i2c7_hs_bus: i2c7-hs-bus { - samsung,pins = "gpb2-2", "gpb2-3"; - samsung,pin-function = <3>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - i2c0_bus: i2c0-bus { - samsung,pins = "gpb3-0", "gpb3-1"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - i2c1_bus: i2c1-bus { - samsung,pins = "gpb3-2", "gpb3-3"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - i2c8_hs_bus: i2c8-hs-bus { - samsung,pins = "gpb3-4", "gpb3-5"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - i2c9_hs_bus: i2c9-hs-bus { - samsung,pins = "gpb3-6", "gpb3-7"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - i2c10_hs_bus: i2c10-hs-bus { - samsung,pins = "gpb4-0", "gpb4-1"; - samsung,pin-function = <2>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - }; - - pinctrl@03860000 { - gpz: gpz { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - i2s0_bus: i2s0-bus { - samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3", - "gpz-4", "gpz-5", "gpz-6"; - samsung,pin-function = <2>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; +&pinctrl_0 { + gpy7: gpy7 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx0: gpx0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&combiner>; + #interrupt-cells = <2>; + interrupts = <23 0>, <24 0>, <25 0>, <25 1>, + <26 0>, <26 1>, <27 0>, <27 1>; + }; + + gpx1: gpx1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&combiner>; + #interrupt-cells = <2>; + interrupts = <28 0>, <28 1>, <29 0>, <29 1>, + <30 0>, <30 1>, <31 0>, <31 1>; + }; + + gpx2: gpx2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx3: gpx3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + dp_hpd: dp_hpd { + samsung,pins = "gpx0-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_1 { + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc2: gpc2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc3: gpc3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc4: gpc4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpy0: gpy0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy1: gpy1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy2: gpy2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy3: gpy3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy4: gpy4 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy5: gpy5 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy6: gpy6 { + gpio-controller; + #gpio-cells = <2>; + }; + + sd0_clk: sd0-clk { + samsung,pins = "gpc0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpc0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cd: sd0-cd { + samsung,pins = "gpc0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus1: sd0-bus-width1 { + samsung,pins = "gpc0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus4: sd0-bus-width4 { + samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus8: sd0-bus-width8 { + samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_clk: sd1-clk { + samsung,pins = "gpc1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_rclk: sd0-rclk { + samsung,pins = "gpc0-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <1>; + samsung,pin-drv = <3>; + }; + + sd1_cmd: sd1-cmd { + samsung,pins = "gpc1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_cd: sd1-cd { + samsung,pins = "gpc1-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_int: sd1-int { + samsung,pins = "gpd1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + sd1_bus1: sd1-bus-width1 { + samsung,pins = "gpc1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_bus4: sd1-bus-width4 { + samsung,pins = "gpc1-4", "gpc1-5", "gpc1-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_bus8: sd1-bus-width8 { + samsung,pins = "gpd1-4", "gpd1-5", "gpd1-6", "gpd1-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_clk: sd2-clk { + samsung,pins = "gpc2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cmd: sd2-cmd { + samsung,pins = "gpc2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cd: sd2-cd { + samsung,pins = "gpc2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus1: sd2-bus-width1 { + samsung,pins = "gpc2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus4: sd2-bus-width4 { + samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; +}; + +&pinctrl_2 { + gpe0: gpe0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe1: gpe1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg0: gpg0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg1: gpg1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg2: gpg2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj4: gpj4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + cam_gpio_a: cam-gpio-a { + samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3", + "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7", + "gpe1-0", "gpe1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + cam_gpio_b: cam-gpio-b { + samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3", + "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + cam_i2c2_bus: cam-i2c2-bus { + samsung,pins = "gpf0-4", "gpf0-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + cam_spi1_bus: cam-spi1-bus { + samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + cam_i2c1_bus: cam-i2c1-bus { + samsung,pins = "gpf0-2", "gpf0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + cam_i2c0_bus: cam-i2c0-bus { + samsung,pins = "gpf0-0", "gpf0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + cam_spi0_bus: cam-spi0-bus { + samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + cam_bayrgb_bus: cam-bayrgb-bus { + samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3", + "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7", + "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3", + "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7", + "gpg2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_3 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa2: gpa2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb0: gpb0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb1: gpb1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb2: gpb2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb3: gpb3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb4: gpb4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph0: gph0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + uart0_data: uart0-data { + samsung,pins = "gpa0-0", "gpa0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gpa0-2", "gpa0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_data: uart1-data { + samsung,pins = "gpa0-4", "gpa0-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c2_bus: i2c2-bus { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + uart2_data: uart2-data { + samsung,pins = "gpa1-0", "gpa1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart2_fctl: uart2-fctl { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c3_bus: i2c3-bus { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + uart3_data: uart3-data { + samsung,pins = "gpa1-4", "gpa1-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spi0_bus: spi0-bus { + samsung,pins = "gpa2-0", "gpa2-1", "gpa2-2", "gpa2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi1_bus: spi1-bus { + samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c4_hs_bus: i2c4-hs-bus { + samsung,pins = "gpa2-0", "gpa2-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c5_hs_bus: i2c5-hs-bus { + samsung,pins = "gpa2-2", "gpa2-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2s1_bus: i2s1-bus { + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3", + "gpb0-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pcm1_bus: pcm1-bus { + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3", + "gpb0-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2s2_bus: i2s2-bus { + samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3", + "gpb1-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pcm2_bus: pcm2-bus { + samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3", + "gpb1-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spdif_bus: spdif-bus { + samsung,pins = "gpb1-0", "gpb1-1"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spi2_bus: spi2-bus { + samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4"; + samsung,pin-function = <5>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c6_hs_bus: i2c6-hs-bus { + samsung,pins = "gpb1-3", "gpb1-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + pwm0_out: pwm0-out { + samsung,pins = "gpb2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm1_out: pwm1-out { + samsung,pins = "gpb2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm2_out: pwm2-out { + samsung,pins = "gpb2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm3_out: pwm3-out { + samsung,pins = "gpb2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c7_hs_bus: i2c7-hs-bus { + samsung,pins = "gpb2-2", "gpb2-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c0_bus: i2c0-bus { + samsung,pins = "gpb3-0", "gpb3-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c1_bus: i2c1-bus { + samsung,pins = "gpb3-2", "gpb3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c8_hs_bus: i2c8-hs-bus { + samsung,pins = "gpb3-4", "gpb3-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c9_hs_bus: i2c9-hs-bus { + samsung,pins = "gpb3-6", "gpb3-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c10_hs_bus: i2c10-hs-bus { + samsung,pins = "gpb4-0", "gpb4-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_4 { + gpz: gpz { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + i2s0_bus: i2s0-bus { + samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3", + "gpz-4", "gpz-5", "gpz-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; }; }; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 534f27ceb10b..df9aee92ecf4 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -15,7 +15,6 @@ #include <dt-bindings/clock/exynos5420.h> #include "exynos5.dtsi" -#include "exynos5420-pinctrl.dtsi" #include <dt-bindings/clock/exynos-audss-clk.h> @@ -1166,3 +1165,5 @@ clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; clock-names = "uart", "clk_uart_baud0"; }; + +#include "exynos5420-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi b/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi new file mode 100644 index 000000000000..2b289d7c0d13 --- /dev/null +++ b/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi @@ -0,0 +1,59 @@ +/* + * Device tree sources for Exynos5422 thermal zone + * + * Copyright (c) 2015 Lukasz Majewski <l.majewski@samsung.com> + * Anand Moon <linux.amoon@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <dt-bindings/thermal/thermal.h> + +/ { + thermal-zones { + cpu0_thermal: cpu0-thermal { + thermal-sensors = <&tmu_cpu0 0>; + polling-delay-passive = <0>; + polling-delay = <0>; + trips { + cpu_alert0: cpu-alert-0 { + temperature = <50000>; /* millicelsius */ + hysteresis = <5000>; /* millicelsius */ + type = "active"; + }; + cpu_alert1: cpu-alert-1 { + temperature = <60000>; /* millicelsius */ + hysteresis = <5000>; /* millicelsius */ + type = "active"; + }; + cpu_alert2: cpu-alert-2 { + temperature = <70000>; /* millicelsius */ + hysteresis = <5000>; /* millicelsius */ + type = "active"; + }; + cpu_crit0: cpu-crit-0 { + temperature = <120000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = <&fan0 0 1>; + }; + map1 { + trip = <&cpu_alert1>; + cooling-device = <&fan0 1 2>; + }; + map2 { + trip = <&cpu_alert2>; + cooling-device = <&fan0 2 3>; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 8adf455744e9..1565667e6f69 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -15,6 +15,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/sound/samsung-i2s.h> #include "exynos5800.dtsi" +#include "exynos5422-cpu-thermal.dtsi" / { memory { @@ -107,6 +108,15 @@ clocks = <&i2s0 CLK_I2S_CDCLK>; }; }; + + fan0: pwm-fan { + compatible = "pwm-fan"; + pwms = <&pwm 0 20972 0>; + cooling-min-state = <0>; + cooling-max-state = <3>; + #cooling-cells = <2>; + cooling-levels = <0 130 170 230>; + }; }; &clock_audss { @@ -461,6 +471,32 @@ */ pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>; pinctrl-names = "default"; + samsung,pwm-outputs = <0>; + status = "okay"; +}; + +&tmu_cpu0 { + vtmu-supply = <&ldo7_reg>; + status = "okay"; +}; + +&tmu_cpu1 { + vtmu-supply = <&ldo7_reg>; + status = "okay"; +}; + +&tmu_cpu2 { + vtmu-supply = <&ldo7_reg>; + status = "okay"; +}; + +&tmu_cpu3 { + vtmu-supply = <&ldo7_reg>; + status = "okay"; +}; + +&tmu_gpu { + vtmu-supply = <&ldo7_reg>; status = "okay"; }; @@ -477,3 +513,13 @@ &usbdrd_dwc3_1 { dr_mode = "otg"; }; + +&usbdrd3_0 { + vdd33-supply = <&ldo9_reg>; + vdd10-supply = <&ldo11_reg>; +}; + +&usbdrd3_1 { + vdd33-supply = <&ldo9_reg>; + vdd10-supply = <&ldo11_reg>; +}; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index b69be5c499cf..feb9d34b239c 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -144,6 +144,15 @@ clock-names = "ipg", "per"; }; + rtc: rtc@10007000 { + compatible = "fsl,imx21-rtc"; + reg = <0x10007000 0x1000>; + interrupts = <22>; + clocks = <&clks IMX27_CLK_CKIL>, + <&clks IMX27_CLK_RTC_IPG_GATE>; + clock-names = "ref", "ipg"; + }; + kpp: kpp@10008000 { compatible = "fsl,imx27-kpp", "fsl,imx21-kpp"; reg = <0x10008000 0x1000>; diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index b0d5542ac829..53fd75c8ffcf 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -228,10 +228,11 @@ >; }; + /* open drain */ pinctrl_i2c1: i2c1grp { fsl,pins = < - MX53_PAD_CSI0_DAT8__I2C1_SDA 0xc0000000 - MX53_PAD_CSI0_DAT9__I2C1_SCL 0xc0000000 + MX53_PAD_CSI0_DAT8__I2C1_SDA 0x400001ec + MX53_PAD_CSI0_DAT9__I2C1_SCL 0x400001ec >; }; diff --git a/arch/arm/boot/dts/imx53-qsrb.dts b/arch/arm/boot/dts/imx53-qsrb.dts index 82d623d05915..66e47de5e826 100644 --- a/arch/arm/boot/dts/imx53-qsrb.dts +++ b/arch/arm/boot/dts/imx53-qsrb.dts @@ -20,15 +20,7 @@ }; &iomuxc { - i2c1 { - /* open drain */ - pinctrl_i2c1_qsrb: i2c1grp-1 { - fsl,pins = < - MX53_PAD_CSI0_DAT8__I2C1_SDA 0x400001ec - MX53_PAD_CSI0_DAT9__I2C1_SCL 0x400001ec - >; - }; - + imx53-qsrb { pinctrl_pmic: pmicgrp { fsl,pins = < MX53_PAD_CSI0_DAT5__GPIO5_23 0x1e4 /* IRQ */ @@ -38,10 +30,6 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1_qsrb>; - status = "okay"; - pmic: mc34708@8 { compatible = "fsl,mc34708"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi index f2867c4b34a8..7b31fdb79ced 100644 --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi @@ -248,7 +248,6 @@ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 4493f6e99330..1b66328a8498 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -316,10 +316,13 @@ }; &usdhc3 { - pinctrl-names = "default"; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; + no-1-8-v; /* firmware will remove if board revision supports */ status = "okay"; }; @@ -380,7 +383,6 @@ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 @@ -469,7 +471,34 @@ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* CD */ + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x170b9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9 >; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index a857d1294609..7c51839ff934 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -322,10 +322,13 @@ }; &usdhc3 { - pinctrl-names = "default"; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; + no-1-8-v; /* firmware will remove if board revision supports */ status = "okay"; }; @@ -385,7 +388,6 @@ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 @@ -476,7 +478,34 @@ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* CD */ + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9 >; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 1afe3385e2d2..929e0b37bd9e 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -415,10 +415,13 @@ }; &usdhc3 { - pinctrl-names = "default"; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; + no-1-8-v; /* firmware will remove if board revision supports */ status = "okay"; }; @@ -478,7 +481,6 @@ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 @@ -568,6 +570,34 @@ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */ + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9 >; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi index d1866a0a2f13..741f3d529e3e 100644 --- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi @@ -250,7 +250,6 @@ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi index 5c6587f6c420..d1e5048b00b5 100644 --- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi @@ -202,7 +202,6 @@ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index d7fe6672d00c..340bc8e42650 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -54,6 +54,17 @@ gpio = <&gpio3 22 0>; enable-active-high; }; + + reg_can_xcvr: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "CAN XCVR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can_xcvr>; + gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; + }; }; gpio-keys { @@ -149,6 +160,20 @@ status = "okay"; }; +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + xceiver-supply = <®_can_xcvr>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + &ecspi1 { fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 19 0>; @@ -245,6 +270,20 @@ >; }; + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 + >; + }; + + pinctrl_can_xcvr: can-xcvrgrp { + fsl,pins = < + /* Flexcan XCVR enable */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; + pinctrl_ecspi1: ecspi1grp { fsl,pins = < MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index e329ca5c3322..c37bb9ff9fac 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -28,6 +28,71 @@ }; }; + clocks { + codec_osc: anaclk2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_audio: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "cs42888_supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_h1_vbus: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg_vbus: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&max7310_c 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; + + sound-cs42888 { + compatible = "fsl,imx6-sabreauto-cs42888", + "fsl,imx-audio-cs42888"; + model = "imx-cs42888"; + audio-cpu = <&esai>; + audio-asrc = <&asrc>; + audio-codec = <&codec>; + audio-routing = + "Line Out Jack", "AOUT1L", + "Line Out Jack", "AOUT1R", + "Line Out Jack", "AOUT2L", + "Line Out Jack", "AOUT2R", + "Line Out Jack", "AOUT3L", + "Line Out Jack", "AOUT3R", + "Line Out Jack", "AOUT4L", + "Line Out Jack", "AOUT4R", + "AIN1L", "Line In Jack", + "AIN1R", "Line In Jack", + "AIN2L", "Line In Jack", + "AIN2R", "Line In Jack"; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif", "fsl,imx-sabreauto-spdif"; @@ -45,6 +110,19 @@ }; }; +&clks { + assigned-clocks = <&clks IMX6QDL_PLL4_BYPASS_SRC>, + <&clks IMX6QDL_PLL4_BYPASS>, + <&clks IMX6QDL_CLK_PLL4_POST_DIV>, + <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_LVDS2_IN>, + <&clks IMX6QDL_PLL4_BYPASS_SRC>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; + assigned-clock-rates = <0>, <0>, <24576000>; +}; + &ecspi1 { fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 19 0>; @@ -61,6 +139,16 @@ }; }; +&esai { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esai>; + assigned-clocks = <&clks IMX6QDL_CLK_ESAI_SEL>, + <&clks IMX6QDL_CLK_ESAI_EXTAL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <0>, <24576000>; + status = "okay"; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; @@ -76,6 +164,10 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + &i2c2 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -180,6 +272,18 @@ }; }; }; + + codec: cs42888@48 { + compatible = "cirrus,cs42888"; + reg = <0x48>; + clocks = <&codec_osc>; + clock-names = "mclk"; + VA-supply = <®_audio>; + VD-supply = <®_audio>; + VLS-supply = <®_audio>; + VLC-supply = <®_audio>; + }; + }; &i2c3 { @@ -257,6 +361,21 @@ >; }; + pinctrl_esai: esaigrp { + fsl,pins = < + MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1b030 + MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS 0x1b030 + MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x1b030 + MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3 0x1b030 + MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1 0x1b030 + MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0 0x1b030 + MX6QDL_PAD_GPIO_17__ESAI_TX0 0x1b030 + MX6QDL_PAD_NANDF_CS3__ESAI_TX1 0x1b030 + MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK 0x1b030 + MX6QDL_PAD_GPIO_9__ESAI_RX_FS 0x1b030 + >; + }; + pinctrl_gpio_leds: gpioledsgrp { fsl,pins = < MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x80000000 @@ -318,6 +437,12 @@ >; }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + >; + }; + pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 @@ -462,6 +587,18 @@ status = "okay"; }; +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + status = "okay"; +}; + &usdhc3 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc3>; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 782379320517..ce4c7313f509 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -53,6 +53,17 @@ gpio = <&gpio3 22 0>; enable-active-high; }; + + reg_can_xcvr: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "CAN XCVR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can_xcvr>; + gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; + }; }; gpio-keys { @@ -148,6 +159,20 @@ status = "okay"; }; +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + xceiver-supply = <®_can_xcvr>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + &ecspi1 { fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 19 0>; @@ -239,6 +264,20 @@ >; }; + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 + >; + }; + + pinctrl_can_xcvr: can-xcvrgrp { + fsl,pins = < + /* Flexcan XCVR enable */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; + pinctrl_ecspi1: ecspi1grp { fsl,pins = < MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 944eb81cb2b8..2c07d3a86b61 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -141,6 +141,13 @@ status = "okay"; }; +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + &ecspi1 { fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio4 9 0>; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 10d0b26c93f1..e716e6f301c6 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -300,8 +300,19 @@ }; esai: esai@02024000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx35-esai"; reg = <0x02024000 0x4000>; interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_ESAI_IPG>, + <&clks IMX6QDL_CLK_ESAI_MEM>, + <&clks IMX6QDL_CLK_ESAI_EXTAL>, + <&clks IMX6QDL_CLK_ESAI_IPG>, + <&clks IMX6QDL_CLK_SPBA>; + clock-names = "core", "mem", "extal", "fsys", "dma"; + dmas = <&sdma 23 21 0>, <&sdma 24 21 0>; + dma-names = "rx", "tx"; + status = "disabled"; }; ssi1: ssi@02028000 { @@ -353,8 +364,28 @@ }; asrc: asrc@02034000 { + compatible = "fsl,imx53-asrc"; reg = <0x02034000 0x4000>; interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_ASRC_IPG>, + <&clks IMX6QDL_CLK_ASRC_MEM>, <&clks 0>, + <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, + <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, + <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, + <&clks IMX6QDL_CLK_ASRC>, <&clks 0>, <&clks 0>, + <&clks IMX6QDL_CLK_SPBA>; + clock-names = "mem", "ipg", "asrck_0", + "asrck_1", "asrck_2", "asrck_3", "asrck_4", + "asrck_5", "asrck_6", "asrck_7", "asrck_8", + "asrck_9", "asrck_a", "asrck_b", "asrck_c", + "asrck_d", "asrck_e", "asrck_f", "dma"; + dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>, + <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>; + dma-names = "rxa", "rxb", "rxc", + "txa", "txb", "txc"; + fsl,asrc-rate = <48000>; + fsl,asrc-width = <16>; + status = "okay"; }; spba@0203c000 { @@ -687,22 +718,23 @@ fsl,anatop = <&anatop>; }; - snvs@020cc000 { - compatible = "fsl,sec-v4.0-mon", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x020cc000 0x4000>; + snvs: snvs@020cc000 { + compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; + reg = <0x020cc000 0x4000>; - snvs_rtc: snvs-rtc-lp@34 { + snvs_rtc: snvs-rtc-lp { compatible = "fsl,sec-v4.0-mon-rtc-lp"; - reg = <0x34 0x58>; + regmap = <&snvs>; + offset = <0x34>; interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>, <0 20 IRQ_TYPE_LEVEL_HIGH>; }; - snvs_poweroff: snvs-poweroff@38 { - compatible = "fsl,sec-v4.0-poweroff"; - reg = <0x38 0x4>; + snvs_poweroff: snvs-poweroff { + compatible = "syscon-poweroff"; + regmap = <&snvs>; + offset = <0x38>; + mask = <0x60>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx6sl-warp.dts b/arch/arm/boot/dts/imx6sl-warp.dts index 0da906bd8df2..10c69963100f 100644 --- a/arch/arm/boot/dts/imx6sl-warp.dts +++ b/arch/arm/boot/dts/imx6sl-warp.dts @@ -61,7 +61,9 @@ usdhc3_pwrseq: usdhc3_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>, /* WL_REG_ON */ + <&gpio4 7 GPIO_ACTIVE_LOW>, /* WL_HOSTWAKE */ <&gpio3 25 GPIO_ACTIVE_LOW>, /* BT_REG_ON */ + <&gpio3 27 GPIO_ACTIVE_LOW>, /* BT_HOSTWAKE */ <&gpio4 4 GPIO_ACTIVE_LOW>, /* BT_WAKE */ <&gpio4 6 GPIO_ACTIVE_LOW>; /* BT_RST_N */ }; @@ -73,16 +75,16 @@ status = "okay"; }; -&uart2 { +&uart3 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - fsl,uart-has-rtscts; + pinctrl-0 = <&pinctrl_uart3>; status = "okay"; }; -&uart3 { +&uart5 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; + pinctrl-0 = <&pinctrl_uart5>; + fsl,uart-has-rtscts; status = "okay"; }; @@ -130,14 +132,6 @@ >; }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6SL_PAD_EPDC_D12__UART2_RX_DATA 0x41b0b1 - MX6SL_PAD_EPDC_D13__UART2_TX_DATA 0x41b0b1 - MX6SL_PAD_EPDC_D14__UART2_RTS_B 0x4130B1 - MX6SL_PAD_EPDC_D15__UART2_CTS_B 0x4130B1 - >; - }; pinctrl_uart3: uart3grp { fsl,pins = < @@ -146,6 +140,15 @@ >; }; + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6SL_PAD_ECSPI1_SCLK__UART5_RX_DATA 0x41b0b1 + MX6SL_PAD_ECSPI1_MOSI__UART5_TX_DATA 0x41b0b1 + MX6SL_PAD_ECSPI1_MISO__UART5_RTS_B 0x4130b1 + MX6SL_PAD_ECSPI1_SS0__UART5_CTS_B 0x4130b1 + >; + }; + pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX6SL_PAD_SD2_CMD__SD2_CMD 0x417059 @@ -158,6 +161,7 @@ MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x417059 MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x417059 MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x417059 + MX6SL_PAD_SD2_RST__SD2_RESET 0x417059 >; }; @@ -173,6 +177,7 @@ MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x4170b9 MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x4170b9 MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x4170b9 + MX6SL_PAD_SD2_RST__SD2_RESET 0x4170b9 >; }; @@ -188,6 +193,7 @@ MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x4170f9 MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x4170f9 MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x4170f9 + MX6SL_PAD_SD2_RST__SD2_RESET 0x4170f9 >; }; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index a78e715e3982..320a27f8889e 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -563,22 +563,23 @@ fsl,anatop = <&anatop>; }; - snvs@020cc000 { - compatible = "fsl,sec-v4.0-mon", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x020cc000 0x4000>; + snvs: snvs@020cc000 { + compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; + reg = <0x020cc000 0x4000>; - snvs_rtc: snvs-rtc-lp@34 { + snvs_rtc: snvs-rtc-lp { compatible = "fsl,sec-v4.0-mon-rtc-lp"; - reg = <0x34 0x58>; + regmap = <&snvs>; + offset = <0x34>; interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>, <0 20 IRQ_TYPE_LEVEL_HIGH>; }; - snvs_poweroff: snvs-poweroff@38 { - compatible = "fsl,sec-v4.0-poweroff"; - reg = <0x38 0x4>; + snvs_poweroff: snvs-poweroff { + compatible = "syscon-poweroff"; + regmap = <&snvs>; + offset = <0x38>; + mask = <0x60>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index e6223d8e79af..c94f2ea2316e 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/clock/imx6sx-clock.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include "imx6sx-pinfunc.h" #include "skeleton.dtsi" @@ -662,22 +663,31 @@ }; snvs: snvs@020cc000 { - compatible = "fsl,sec-v4.0-mon", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x020cc000 0x4000>; + compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; + reg = <0x020cc000 0x4000>; - snvs_rtc: snvs-rtc-lp@34 { + snvs_rtc: snvs-rtc-lp { compatible = "fsl,sec-v4.0-mon-rtc-lp"; - reg = <0x34 0x58>; + regmap = <&snvs>; + offset = <0x34>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; }; - snvs_poweroff: snvs-poweroff@38 { - compatible = "fsl,sec-v4.0-poweroff"; - reg = <0x38 0x4>; + snvs_poweroff: snvs-poweroff { + compatible = "syscon-poweroff"; + regmap = <&snvs>; + offset = <0x38>; + mask = <0x60>; status = "disabled"; }; + + snvs_pwrkey: snvs-powerkey { + compatible = "fsl,sec-v4.0-pwrkey"; + regmap = <&snvs>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + linux,keycode = <KEY_POWER>; + wakeup-source; + }; }; epit1: epit@020d0000 { diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts new file mode 100644 index 000000000000..25746b122ea6 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts @@ -0,0 +1,343 @@ +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "imx6ul.dtsi" + +/ { + model = "Freescale i.MX6 UltraLite 14x14 EVK Board"; + compatible = "fsl,imx6ul-14x14-evk", "fsl,imx6ul"; + + chosen { + stdout-path = &uart1; + }; + + memory { + reg = <0x80000000 0x20000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_sd1_vmmc: sd1_regulator { + compatible = "regulator-fixed"; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; +}; + +&cpu0 { + arm-supply = <®_arm>; + soc-supply = <®_soc>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + status = "okay"; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@2 { + reg = <2>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; + }; +}; + +&qspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi>; + status = "okay"; + + flash0: n25q256a@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q256a"; + spi-max-frequency = <29000000>; + reg = <0>; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + keep-power-in-suspend; + enable-sdio-wakeup; + vmmc-supply = <®_sd1_vmmc>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + no-1-8-v; + keep-power-in-suspend; + enable-sdio-wakeup; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + + pinctrl_csi1: csi1grp { + fsl,pins = < + MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088 + MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088 + MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088 + MX6UL_PAD_CSI_HSYNC__CSI_HSYNC 0x1b088 + MX6UL_PAD_CSI_DATA00__CSI_DATA02 0x1b088 + MX6UL_PAD_CSI_DATA01__CSI_DATA03 0x1b088 + MX6UL_PAD_CSI_DATA02__CSI_DATA04 0x1b088 + MX6UL_PAD_CSI_DATA03__CSI_DATA05 0x1b088 + MX6UL_PAD_CSI_DATA04__CSI_DATA06 0x1b088 + MX6UL_PAD_CSI_DATA05__CSI_DATA07 0x1b088 + MX6UL_PAD_CSI_DATA06__CSI_DATA08 0x1b088 + MX6UL_PAD_CSI_DATA07__CSI_DATA09 0x1b088 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031 + MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x17059 + >; + }; + + pinctrl_flexcan1: flexcan1grp{ + fsl,pins = < + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020 + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020 + >; + }; + + pinctrl_flexcan2: flexcan2grp{ + fsl,pins = < + MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020 + MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 + MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0 + MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0 + >; + }; + + pinctrl_lcdif_dat: lcdifdatgrp { + fsl,pins = < + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79 + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79 + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79 + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79 + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79 + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79 + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79 + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79 + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79 + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79 + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79 + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79 + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79 + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79 + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79 + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79 + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79 + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79 + MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x79 + MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x79 + MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x79 + MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x79 + MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x79 + MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x79 + >; + }; + + pinctrl_lcdif_ctrl: lcdifctrlgrp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79 + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79 + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79 + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79 + /* used for lcd reset */ + MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x79 + >; + }; + + pinctrl_qspi: qspigrp { + fsl,pins = < + MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70a1 + MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a1 + MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70a1 + MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70a1 + MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70a1 + MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO08__PWM1_OUT 0x110b0 + >; + }; + + pinctrl_sim2: sim2grp { + fsl,pins = < + MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD 0xb808 + MX6UL_PAD_CSI_DATA04__SIM2_PORT1_CLK 0x31 + MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B 0xb808 + MX6UL_PAD_CSI_DATA06__SIM2_PORT1_SVEN 0xb808 + MX6UL_PAD_CSI_DATA07__SIM2_PORT1_TRXD 0xb809 + MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x3008 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 + MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 + MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS 0x1b0b1 + MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS 0x1b0b1 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 /* SD1 CD */ + MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT 0x17059 /* SD1 VSELECT */ + MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x17059 /* SD1 RESET */ + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 + + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17059 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-pinfunc.h b/arch/arm/boot/dts/imx6ul-pinfunc.h new file mode 100644 index 000000000000..20c7da1affce --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-pinfunc.h @@ -0,0 +1,938 @@ +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __DTS_IMX6UL_PINFUNC_H +#define __DTS_IMX6UL_PINFUNC_H + +/* + * The pin function ID is a tuple of + * <mux_reg conf_reg input_reg mux_mode input_val> + */ +#define MX6UL_PAD_BOOT_MODE0__GPIO5_IO10 0x0014 0x02a0 0x0000 5 0 +#define MX6UL_PAD_BOOT_MODE1__GPIO5_IO11 0x0018 0x02a4 0x0000 5 0 + +#define MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x001c 0x02a8 0x0000 5 0 +#define MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x0020 0x02ac 0x0000 5 0 +#define MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x0024 0x02b0 0x0000 5 0 +#define MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x0028 0x02b4 0x0000 5 0 +#define MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x002c 0x02b8 0x0000 5 0 +#define MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0030 0x02bc 0x0000 5 0 +#define MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x0034 0x02c0 0x0000 5 0 +#define MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x0038 0x02c4 0x0000 5 0 +#define MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x003c 0x02c8 0x0000 5 0 +#define MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x0040 0x02cc 0x0000 5 0 + +#define MX6UL_PAD_JTAG_MOD__SJC_MOD 0x0044 0x02d0 0x0000 0 0 +#define MX6UL_PAD_JTAG_MOD__GPT2_CLK 0x0044 0x02d0 0x05a0 1 0 +#define MX6UL_PAD_JTAG_MOD__SPDIF_OUT 0x0044 0x02d0 0x0000 2 0 +#define MX6UL_PAD_JTAG_MOD__ENET1_REF_CLK_25M 0x0044 0x02d0 0x0000 3 0 +#define MX6UL_PAD_JTAG_MOD__CCM_PMIC_RDY 0x0044 0x02d0 0x04c0 4 0 +#define MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0x0044 0x02d0 0x0000 5 0 +#define MX6UL_PAD_JTAG_MOD__SDMA_EXT_EVENT00 0x0044 0x02d0 0x0000 6 0 +#define MX6UL_PAD_JTAG_TMS__SJC_TMS 0x0048 0x02d4 0x0000 0 0 +#define MX6UL_PAD_JTAG_TMS__GPT2_CAPTURE1 0x0048 0x02d4 0x0598 1 0 +#define MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x0048 0x02d4 0x0000 2 0 +#define MX6UL_PAD_JTAG_TMS__CCM_CLKO1 0x0048 0x02d4 0x0000 3 0 +#define MX6UL_PAD_JTAG_TMS__CCM_WAIT 0x0048 0x02d4 0x0000 4 0 +#define MX6UL_PAD_JTAG_TMS__GPIO1_IO11 0x0048 0x02d4 0x0000 5 0 +#define MX6UL_PAD_JTAG_TMS__SDMA_EXT_EVENT01 0x0048 0x02d4 0x0000 6 0 +#define MX6UL_PAD_JTAG_TMS__EPIT1_OUT 0x0048 0x02d4 0x0000 8 0 +#define MX6UL_PAD_JTAG_TDO__SJC_TDO 0x004c 0x02d8 0x0000 0 0 +#define MX6UL_PAD_JTAG_TDO__GPT2_CAPTURE2 0x004c 0x02d8 0x059c 1 0 +#define MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x004c 0x02d8 0x05fc 2 0 +#define MX6UL_PAD_JTAG_TDO__CCM_CLKO2 0x004c 0x02d8 0x0000 3 0 +#define MX6UL_PAD_JTAG_TDO__CCM_STOP 0x004c 0x02d8 0x0000 4 0 +#define MX6UL_PAD_JTAG_TDO__GPIO1_IO12 0x004c 0x02d8 0x0000 5 0 +#define MX6UL_PAD_JTAG_TDO__MQS_RIGHT 0x004c 0x02d8 0x0000 6 0 +#define MX6UL_PAD_JTAG_TDO__EPIT2_OUT 0x004c 0x02d8 0x0000 8 0 +#define MX6UL_PAD_JTAG_TDI__SJC_TDI 0x0050 0x02dc 0x0000 0 0 +#define MX6UL_PAD_JTAG_TDI__GPT2_COMPARE1 0x0050 0x02dc 0x0000 1 0 +#define MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x0050 0x02dc 0x05f8 2 0 +#define MX6UL_PAD_JTAG_TDI__PWM6_OUT 0x0050 0x02dc 0x0000 4 0 +#define MX6UL_PAD_JTAG_TDI__GPIO1_IO13 0x0050 0x02dc 0x0000 5 0 +#define MX6UL_PAD_JTAG_TDI__MQS_LEFT 0x0050 0x02dc 0x0000 6 0 +#define MX6UL_PAD_JTAG_TDI__SIM1_POWER_FAIL 0x0050 0x02dc 0x0000 8 0 +#define MX6UL_PAD_JTAG_TCK__SJC_TCK 0x0054 0x02e0 0x0000 0 0 +#define MX6UL_PAD_JTAG_TCK__GPT2_COMPARE2 0x0054 0x02e0 0x0000 1 0 +#define MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x0054 0x02e0 0x0000 2 0 +#define MX6UL_PAD_JTAG_TCK__PWM7_OUT 0x0054 0x02e0 0x0000 4 0 +#define MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x0054 0x02e0 0x0000 5 0 +#define MX6UL_PAD_JTAG_TCK__SIM2_POWER_FAIL 0x0054 0x02e0 0x0000 8 0 +#define MX6UL_PAD_JTAG_TRST_B__SJC_TRSTB 0x0058 0x02e4 0x0000 0 0 +#define MX6UL_PAD_JTAG_TRST_B__GPT2_COMPARE3 0x0058 0x02e4 0x0000 1 0 +#define MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x0058 0x02e4 0x0000 2 0 +#define MX6UL_PAD_JTAG_TRST_B__PWM8_OUT 0x0058 0x02e4 0x0000 4 0 +#define MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15 0x0058 0x02e4 0x0000 5 0 +#define MX6UL_PAD_JTAG_TRST_B__CAAM_RNG_OSC_OBS 0x0058 0x02e4 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0x005c 0x02e8 0x05ac 0 1 +#define MX6UL_PAD_GPIO1_IO00__GPT1_CAPTURE1 0x005c 0x02e8 0x058c 1 0 +#define MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x005c 0x02e8 0x04b8 2 0 +#define MX6UL_PAD_GPIO1_IO00__ENET1_REF_CLK1 0x005c 0x02e8 0x0574 3 0 +#define MX6UL_PAD_GPIO1_IO00__MQS_RIGHT 0x005c 0x02e8 0x0000 4 0 +#define MX6UL_PAD_GPIO1_IO00__GPIO1_IO00 0x005c 0x02e8 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO00__ENET1_1588_EVENT0_IN 0x005c 0x02e8 0x0000 6 0 +#define MX6UL_PAD_GPIO1_IO00__SRC_SYSTEM_RESET 0x005c 0x02e8 0x0000 7 0 +#define MX6UL_PAD_GPIO1_IO00__WDOG3_WDOG_B 0x005c 0x02e8 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO01__I2C2_SDA 0x0060 0x02ec 0x05b0 0 1 +#define MX6UL_PAD_GPIO1_IO01__GPT1_COMPARE1 0x0060 0x02ec 0x0000 1 0 +#define MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC 0x0060 0x02ec 0x0664 2 0 +#define MX6UL_PAD_GPIO1_IO01__ENET2_REF_CLK2 0x0060 0x02ec 0x057c 3 0 +#define MX6UL_PAD_GPIO1_IO01__MQS_LEFT 0x0060 0x02ec 0x0000 4 0 +#define MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0x0060 0x02ec 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO01__ENET1_1588_EVENT0_OUT 0x0060 0x02ec 0x0000 6 0 +#define MX6UL_PAD_GPIO1_IO01__SRC_EARLY_RESET 0x0060 0x02ec 0x0000 7 0 +#define MX6UL_PAD_GPIO1_IO01__WDOG1_WDOG_B 0x0060 0x02ec 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO02__I2C1_SCL 0x0064 0x02f0 0x05a4 0 0 +#define MX6UL_PAD_GPIO1_IO02__GPT1_COMPARE2 0x0064 0x02f0 0x0000 1 0 +#define MX6UL_PAD_GPIO1_IO02__USB_OTG2_PWR 0x0064 0x02f0 0x0000 2 0 +#define MX6UL_PAD_GPIO1_IO02__ENET1_REF_CLK_25M 0x0064 0x02f0 0x0000 3 0 +#define MX6UL_PAD_GPIO1_IO02__USDHC1_WP 0x0064 0x02f0 0x066c 4 0 +#define MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x0064 0x02f0 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO02__SDMA_EXT_EVENT00 0x0064 0x02f0 0x0000 6 0 +#define MX6UL_PAD_GPIO1_IO02__SRC_ANY_PU_RESET 0x0064 0x02f0 0x0000 7 0 +#define MX6UL_PAD_GPIO1_IO02__UART1_DCE_TX 0x0064 0x02f0 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO02__UART1_DTE_RX 0x0064 0x02f0 0x0624 8 0 +#define MX6UL_PAD_GPIO1_IO03__I2C1_SDA 0x0068 0x02f4 0x05a8 0 1 +#define MX6UL_PAD_GPIO1_IO03__GPT1_COMPARE3 0x0068 0x02f4 0x0000 1 0 +#define MX6UL_PAD_GPIO1_IO03__USB_OTG2_OC 0x0068 0x02f4 0x0660 2 0 +#define MX6UL_PAD_GPIO1_IO03__USDHC1_CD_B 0x0068 0x02f4 0x0668 4 0 +#define MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x0068 0x02f4 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO03__CCM_DI0_eXT_CLK 0x0068 0x02f4 0x0000 6 0 +#define MX6UL_PAD_GPIO1_IO03__SRC_TESTER_ACK 0x0068 0x02f4 0x0000 7 0 +#define MX6UL_PAD_GPIO1_IO03__UART1_DTE_TX 0x0068 0x02f4 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO03__UART1_DCE_RX 0x0068 0x02f4 0x0624 8 1 +#define MX6UL_PAD_GPIO1_IO04__ENET1_REF_CLK1 0x006c 0x02f8 0x0574 0 1 +#define MX6UL_PAD_GPIO1_IO04__PWM3_OUT 0x006c 0x02f8 0x0000 1 0 +#define MX6UL_PAD_GPIO1_IO04__USB_OTG1_PWR 0x006c 0x02f8 0x0000 2 0 +#define MX6UL_PAD_GPIO1_IO04__USDHC1_RESET_B 0x006c 0x02f8 0x0000 4 0 +#define MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x006c 0x02f8 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO04__ENET2_1588_EVENT0_IN 0x006c 0x02f8 0x0000 6 0 +#define MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX 0x006c 0x02f8 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX 0x006c 0x02f8 0x0644 8 2 +#define MX6UL_PAD_GPIO1_IO05__ENET2_REF_CLK2 0x0070 0x02fc 0x057c 0 1 +#define MX6UL_PAD_GPIO1_IO05__PWM4_OUT 0x0070 0x02fc 0x0000 1 0 +#define MX6UL_PAD_GPIO1_IO05__ANATOP_OTG2_ID 0x0070 0x02fc 0x04bc 2 0 +#define MX6UL_PAD_GPIO1_IO05__CSI_FIELD 0x0070 0x02fc 0x0530 3 0 +#define MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT 0x0070 0x02fc 0x0000 4 0 +#define MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x0070 0x02fc 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO05__ENET2_1588_EVENT0_OUT 0x0070 0x02fc 0x0000 6 0 +#define MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX 0x0070 0x02fc 0x0644 8 3 +#define MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX 0x0070 0x02fc 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x0074 0x0300 0x0578 0 0 +#define MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x0074 0x0300 0x0580 1 0 +#define MX6UL_PAD_GPIO1_IO06__USB_OTG_PWR_WAKE 0x0074 0x0300 0x0000 2 0 +#define MX6UL_PAD_GPIO1_IO06__CSI_MCLK 0x0074 0x0300 0x0000 3 0 +#define MX6UL_PAD_GPIO1_IO06__USDHC2_WP 0x0074 0x0300 0x069c 4 0 +#define MX6UL_PAD_GPIO1_IO06__GPIO1_IO06 0x0074 0x0300 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO06__CCM_WAIT 0x0074 0x0300 0x0000 6 0 +#define MX6UL_PAD_GPIO1_IO06__CCM_REF_EN_B 0x0074 0x0300 0x0000 7 0 +#define MX6UL_PAD_GPIO1_IO06__UART1_DCE_CTS 0x0074 0x0300 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO06__UART1_DTE_RTS 0x0074 0x0300 0x0620 8 0 +#define MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x0078 0x0304 0x0000 0 0 +#define MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x0078 0x0304 0x0000 1 0 +#define MX6UL_PAD_GPIO1_IO07__USB_OTG_HOST_MODE 0x0078 0x0304 0x0000 2 0 +#define MX6UL_PAD_GPIO1_IO07__CSI_PIXCLK 0x0078 0x0304 0x0528 3 0 +#define MX6UL_PAD_GPIO1_IO07__USDHC2_CD_B 0x0078 0x0304 0x0674 4 1 +#define MX6UL_PAD_GPIO1_IO07__GPIO1_IO07 0x0078 0x0304 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO07__CCM_STOP 0x0078 0x0304 0x0000 6 0 +#define MX6UL_PAD_GPIO1_IO07__UART1_DCE_RTS 0x0078 0x0304 0x0620 8 1 +#define MX6UL_PAD_GPIO1_IO07__UART1_DTE_CTS 0x0078 0x0304 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO08__PWM1_OUT 0x007c 0x0308 0x0000 0 0 +#define MX6UL_PAD_GPIO1_IO08__WDOG1_WDOG_B 0x007c 0x0308 0x0000 1 0 +#define MX6UL_PAD_GPIO1_IO08__SPDIF_OUT 0x007c 0x0308 0x0000 2 0 +#define MX6UL_PAD_GPIO1_IO08__CSI_VSYNC 0x007c 0x0308 0x052c 3 1 +#define MX6UL_PAD_GPIO1_IO08__USDHC2_VSELECT 0x007c 0x0308 0x0000 4 0 +#define MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x007c 0x0308 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO08__CCM_PMIC_RDY 0x007c 0x0308 0x04c0 6 1 +#define MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS 0x007c 0x0308 0x0640 8 1 +#define MX6UL_PAD_GPIO1_IO08__UART5_DTE_CTS 0x007c 0x0308 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO09__PWM2_OUT 0x0080 0x030c 0x0000 0 0 +#define MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY 0x0080 0x030c 0x0000 1 0 +#define MX6UL_PAD_GPIO1_IO09__SPDIF_IN 0x0080 0x030c 0x0618 2 0 +#define MX6UL_PAD_GPIO1_IO09__CSI_HSYNC 0x0080 0x030c 0x0524 3 1 +#define MX6UL_PAD_GPIO1_IO09__USDHC2_RESET_B 0x0080 0x030c 0x0000 4 0 +#define MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x0080 0x030c 0x0000 5 0 +#define MX6UL_PAD_GPIO1_IO09__USDHC1_RESET_B 0x0080 0x030c 0x0000 6 0 +#define MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS 0x0080 0x030c 0x0000 8 0 +#define MX6UL_PAD_GPIO1_IO09__UART5_DTE_RTS 0x0080 0x030c 0x0640 8 2 +#define MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x0084 0x0310 0x0000 0 0 +#define MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX 0x0084 0x0310 0x0624 0 2 +#define MX6UL_PAD_UART1_TX_DATA__ENET1_RDATA02 0x0084 0x0310 0x0000 1 0 +#define MX6UL_PAD_UART1_TX_DATA__I2C3_SCL 0x0084 0x0310 0x05b4 2 0 +#define MX6UL_PAD_UART1_TX_DATA__CSI_DATA02 0x0084 0x0310 0x0000 3 0 +#define MX6UL_PAD_UART1_TX_DATA__GPT1_COMPARE1 0x0084 0x0310 0x0000 4 0 +#define MX6UL_PAD_UART1_TX_DATA__GPIO1_IO16 0x0084 0x0310 0x0000 5 0 +#define MX6UL_PAD_UART1_TX_DATA__SPDIF_OUT 0x0084 0x0310 0x0000 8 0 +#define MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x0088 0x0314 0x0624 0 3 +#define MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX 0x0088 0x0314 0x0000 0 0 +#define MX6UL_PAD_UART1_RX_DATA__ENET1_RDATA03 0x0088 0x0314 0x0000 1 0 +#define MX6UL_PAD_UART1_RX_DATA__I2C3_SDA 0x0088 0x0314 0x05b8 2 0 +#define MX6UL_PAD_UART1_RX_DATA__CSI_DATA03 0x0088 0x0314 0x0000 3 0 +#define MX6UL_PAD_UART1_RX_DATA__GPT1_CLK 0x0088 0x0314 0x0594 4 0 +#define MX6UL_PAD_UART1_RX_DATA__GPIO1_IO17 0x0088 0x0314 0x0000 5 0 +#define MX6UL_PAD_UART1_RX_DATA__SPDIF_IN 0x0088 0x0314 0x0000 8 0 +#define MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS 0x008c 0x0318 0x0000 0 0 +#define MX6UL_PAD_UART1_CTS_B__UART1_DTE_RTS 0x008c 0x0318 0x0620 0 2 +#define MX6UL_PAD_UART1_CTS_B__ENET1_RX_CLK 0x008c 0x0318 0x0000 1 0 +#define MX6UL_PAD_UART1_CTS_B__USDHC1_WP 0x008c 0x0318 0x066c 2 1 +#define MX6UL_PAD_UART1_CTS_B__CSI_DATA04 0x008c 0x0318 0x0000 3 0 +#define MX6UL_PAD_UART1_CTS_B__ENET2_1588_EVENT1_IN 0x008c 0x0318 0x0000 4 0 +#define MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x008c 0x0318 0x0000 5 0 +#define MX6UL_PAD_UART1_CTS_B__USDHC2_WP 0x008c 0x0318 0x0000 8 0 +#define MX6UL_PAD_UART1_RTS_B__UART1_DCE_RTS 0x0090 0x031c 0x0620 0 3 +#define MX6UL_PAD_UART1_RTS_B__UART1_DTE_CTS 0x0090 0x031c 0x0000 0 0 +#define MX6UL_PAD_UART1_RTS_B__ENET1_TX_ER 0x0090 0x031c 0x0000 1 0 +#define MX6UL_PAD_UART1_RTS_B__USDHC1_CD_B 0x0090 0x031c 0x0668 2 1 +#define MX6UL_PAD_UART1_RTS_B__CSI_DATA05 0x0090 0x031c 0x0000 3 0 +#define MX6UL_PAD_UART1_RTS_B__ENET2_1588_EVENT1_OUT 0x0090 0x031c 0x0000 4 0 +#define MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0090 0x031c 0x0000 5 0 +#define MX6UL_PAD_UART1_RTS_B__USDHC2_CD_B 0x0090 0x031c 0x0000 8 0 +#define MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x0094 0x0320 0x0000 0 0 +#define MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX 0x0094 0x0320 0x062c 0 0 +#define MX6UL_PAD_UART2_TX_DATA__ENET1_TDATA02 0x0094 0x0320 0x0000 1 0 +#define MX6UL_PAD_UART2_TX_DATA__I2C4_SCL 0x0094 0x0320 0x05bc 2 0 +#define MX6UL_PAD_UART2_TX_DATA__CSI_DATA06 0x0094 0x0320 0x0000 3 0 +#define MX6UL_PAD_UART2_TX_DATA__GPT1_CAPTURE1 0x0094 0x0320 0x058c 4 1 +#define MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x0094 0x0320 0x0000 5 0 +#define MX6UL_PAD_UART2_TX_DATA__ECSPI3_SS0 0x0094 0x0320 0x0000 8 0 +#define MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x0098 0x0324 0x062c 0 1 +#define MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX 0x0098 0x0324 0x0000 0 0 +#define MX6UL_PAD_UART2_RX_DATA__ENET1_TDATA03 0x0098 0x0324 0x0000 1 0 +#define MX6UL_PAD_UART2_RX_DATA__I2C4_SDA 0x0098 0x0324 0x05c0 2 0 +#define MX6UL_PAD_UART2_RX_DATA__CSI_DATA07 0x0098 0x0324 0x0000 3 0 +#define MX6UL_PAD_UART2_RX_DATA__GPT1_CAPTURE2 0x0098 0x0324 0x0590 4 0 +#define MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21 0x0098 0x0324 0x0000 5 0 +#define MX6UL_PAD_UART2_RX_DATA__SJC_DONE 0x0098 0x0324 0x0000 7 0 +#define MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x0098 0x0324 0x0000 8 0 +#define MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS 0x009c 0x0328 0x0000 0 0 +#define MX6UL_PAD_UART2_CTS_B__UART2_DTE_RTS 0x009c 0x0328 0x0628 0 0 +#define MX6UL_PAD_UART2_CTS_B__ENET1_CRS 0x009c 0x0328 0x0000 1 0 +#define MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x009c 0x0328 0x0000 2 0 +#define MX6UL_PAD_UART2_CTS_B__CSI_DATA08 0x009c 0x0328 0x0000 3 0 +#define MX6UL_PAD_UART2_CTS_B__GPT1_COMPARE2 0x009c 0x0328 0x0000 4 0 +#define MX6UL_PAD_UART2_CTS_B__GPIO1_IO22 0x009c 0x0328 0x0000 5 0 +#define MX6UL_PAD_UART2_CTS_B__SJC_DE_B 0x009c 0x0328 0x0000 7 0 +#define MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x009c 0x0328 0x0000 8 0 +#define MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS 0x00a0 0x032c 0x0628 0 1 +#define MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS 0x00a0 0x032c 0x0000 0 0 +#define MX6UL_PAD_UART2_RTS_B__ENET1_COL 0x00a0 0x032c 0x0000 1 0 +#define MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x00a0 0x032c 0x0588 2 0 +#define MX6UL_PAD_UART2_RTS_B__CSI_DATA09 0x00a0 0x032c 0x0000 3 0 +#define MX6UL_PAD_UART2_RTS_B__GPT1_COMPARE3 0x00a0 0x032c 0x0000 4 0 +#define MX6UL_PAD_UART2_RTS_B__GPIO1_IO23 0x00a0 0x032c 0x0000 5 0 +#define MX6UL_PAD_UART2_RTS_B__SJC_FAIL 0x00a0 0x032c 0x0000 7 0 +#define MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO 0x00a0 0x032c 0x0000 8 0 +#define MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x00a4 0x0330 0x0000 0 0 +#define MX6UL_PAD_UART3_TX_DATA__UART3_DTE_RX 0x00a4 0x0330 0x0634 0 0 +#define MX6UL_PAD_UART3_TX_DATA__ENET2_RDATA02 0x00a4 0x0330 0x0000 1 0 +#define MX6UL_PAD_UART3_TX_DATA__SIM1_PORT0_PD 0x00a4 0x0330 0x0000 2 0 +#define MX6UL_PAD_UART3_TX_DATA__CSI_DATA01 0x00a4 0x0330 0x0000 3 0 +#define MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS 0x00a4 0x0330 0x0000 4 0 +#define MX6UL_PAD_UART3_TX_DATA__UART2_DTE_RTS 0x00a4 0x0330 0x0628 4 2 +#define MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x00a4 0x0330 0x0000 5 0 +#define MX6UL_PAD_UART3_TX_DATA__SJC_JTAG_ACT 0x00a4 0x0330 0x0000 7 0 +#define MX6UL_PAD_UART3_TX_DATA__ANATOP_OTG1_ID 0x00a4 0x0330 0x0000 8 0 +#define MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x00a8 0x0334 0x0634 0 1 +#define MX6UL_PAD_UART3_RX_DATA__UART3_DTE_TX 0x00a8 0x0334 0x0000 0 0 +#define MX6UL_PAD_UART3_RX_DATA__ENET2_RDATA03 0x00a8 0x0334 0x0000 1 0 +#define MX6UL_PAD_UART3_RX_DATA__SIM2_PORT0_PD 0x00a8 0x0334 0x0000 2 0 +#define MX6UL_PAD_UART3_RX_DATA__CSI_DATA00 0x00a8 0x0334 0x0000 3 0 +#define MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS 0x00a8 0x0334 0x0628 4 3 +#define MX6UL_PAD_UART3_RX_DATA__UART2_DTE_CTS 0x00a8 0x0334 0x0000 4 0 +#define MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x00a8 0x0334 0x0000 5 0 +#define MX6UL_PAD_UART3_RX_DATA__EPIT1_OUT 0x00a8 0x0334 0x0000 8 0 +#define MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS 0x00ac 0x0338 0x0000 0 0 +#define MX6UL_PAD_UART3_CTS_B__UART3_DTE_RTS 0x00ac 0x0338 0x0630 0 0 +#define MX6UL_PAD_UART3_CTS_B__ENET2_RX_CLK 0x00ac 0x0338 0x0000 1 0 +#define MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x00ac 0x0338 0x0000 2 0 +#define MX6UL_PAD_UART3_CTS_B__CSI_DATA10 0x00ac 0x0338 0x0000 3 0 +#define MX6UL_PAD_UART3_CTS_B__ENET1_1588_EVENT1_IN 0x00ac 0x0338 0x0000 4 0 +#define MX6UL_PAD_UART3_CTS_B__GPIO1_IO26 0x00ac 0x0338 0x0000 5 0 +#define MX6UL_PAD_UART3_CTS_B__EPIT2_OUT 0x00ac 0x0338 0x0000 8 0 +#define MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS 0x00b0 0x033c 0x0630 0 1 +#define MX6UL_PAD_UART3_RTS_B__UART3_DTE_CTS 0x00b0 0x033c 0x0000 0 0 +#define MX6UL_PAD_UART3_RTS_B__ENET2_TX_ER 0x00b0 0x033c 0x0000 1 0 +#define MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x00b0 0x033c 0x0584 2 0 +#define MX6UL_PAD_UART3_RTS_B__CSI_DATA11 0x00b0 0x033c 0x0000 3 0 +#define MX6UL_PAD_UART3_RTS_B__ENET1_1588_EVENT1_OUT 0x00b0 0x033c 0x0000 4 0 +#define MX6UL_PAD_UART3_RTS_B__GPIO1_IO27 0x00b0 0x033c 0x0000 5 0 +#define MX6UL_PAD_UART3_RTS_B__WDOG1_WDOG_B 0x00b0 0x033c 0x0000 8 0 +#define MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x00b4 0x0340 0x0000 0 0 +#define MX6UL_PAD_UART4_TX_DATA__UART4_DTE_RX 0x00b4 0x0340 0x063c 0 0 +#define MX6UL_PAD_UART4_TX_DATA__ENET2_TDATA02 0x00b4 0x0340 0x0000 1 0 +#define MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x00b4 0x0340 0x05a4 2 1 +#define MX6UL_PAD_UART4_TX_DATA__CSI_DATA12 0x00b4 0x0340 0x0000 3 0 +#define MX6UL_PAD_UART4_TX_DATA__CSU_CSU_ALARM_AUT02 0x00b4 0x0340 0x0000 4 0 +#define MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x00b4 0x0340 0x0000 5 0 +#define MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK 0x00b4 0x0340 0x0000 8 0 +#define MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x00b8 0x0344 0x063c 0 1 +#define MX6UL_PAD_UART4_RX_DATA__UART4_DTE_TX 0x00b8 0x0344 0x0000 0 0 +#define MX6UL_PAD_UART4_RX_DATA__ENET2_TDATA03 0x00b8 0x0344 0x0000 1 0 +#define MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x00b8 0x0344 0x05a8 2 2 +#define MX6UL_PAD_UART4_RX_DATA__CSI_DATA13 0x00b8 0x0344 0x0000 3 0 +#define MX6UL_PAD_UART4_RX_DATA__CSU_CSU_ALARM_AUT01 0x00b8 0x0344 0x0000 4 0 +#define MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x00b8 0x0344 0x0000 5 0 +#define MX6UL_PAD_UART4_RX_DATA__ECSPI2_SS0 0x00b8 0x0344 0x0000 8 0 +#define MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x00bc 0x0348 0x0000 5 0 +#define MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI 0x00bc 0x0348 0x0000 8 0 +#define MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x00bc 0x0348 0x0000 0 0 +#define MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX 0x00bc 0x0348 0x0644 0 4 +#define MX6UL_PAD_UART5_TX_DATA__ENET2_CRS 0x00bc 0x0348 0x0000 1 0 +#define MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x00bc 0x0348 0x05ac 2 2 +#define MX6UL_PAD_UART5_TX_DATA__CSI_DATA14 0x00bc 0x0348 0x0000 3 0 +#define MX6UL_PAD_UART5_TX_DATA__CSU_CSU_ALARM_AUT00 0x00bc 0x0348 0x0000 4 0 +#define MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x00c0 0x034c 0x0644 0 5 +#define MX6UL_PAD_UART5_RX_DATA__UART5_DTE_TX 0x00c0 0x034c 0x0000 0 0 +#define MX6UL_PAD_UART5_RX_DATA__ENET2_COL 0x00c0 0x034c 0x0000 1 0 +#define MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x00c0 0x034c 0x05b0 2 2 +#define MX6UL_PAD_UART5_RX_DATA__CSI_DATA15 0x00c0 0x034c 0x0000 3 0 +#define MX6UL_PAD_UART5_RX_DATA__CSU_CSU_INT_DEB 0x00c0 0x034c 0x0000 4 0 +#define MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x00c0 0x034c 0x0000 5 0 +#define MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO 0x00c0 0x034c 0x0000 8 0 +#define MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x00c4 0x0350 0x0000 0 0 +#define MX6UL_PAD_ENET1_RX_DATA0__UART4_DCE_RTS 0x00c4 0x0350 0x0638 1 0 +#define MX6UL_PAD_ENET1_RX_DATA0__UART4_DTE_CTS 0x00c4 0x0350 0x0000 1 0 +#define MX6UL_PAD_ENET1_RX_DATA0__PWM1_OUT 0x00c4 0x0350 0x0000 2 0 +#define MX6UL_PAD_ENET1_RX_DATA0__CSI_DATA16 0x00c4 0x0350 0x0000 3 0 +#define MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX 0x00c4 0x0350 0x0000 4 0 +#define MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00 0x00c4 0x0350 0x0000 5 0 +#define MX6UL_PAD_ENET1_RX_DATA0__KPP_ROW00 0x00c4 0x0350 0x0000 6 0 +#define MX6UL_PAD_ENET1_RX_DATA0__USDHC1_LCTL 0x00c4 0x0350 0x0000 8 0 +#define MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x00c8 0x0354 0x0000 0 0 +#define MX6UL_PAD_ENET1_RX_DATA1__UART4_DCE_CTS 0x00c8 0x0354 0x0000 1 0 +#define MX6UL_PAD_ENET1_RX_DATA1__UART4_DTE_RTS 0x00c8 0x0354 0x0638 1 1 +#define MX6UL_PAD_ENET1_RX_DATA1__PWM2_OUT 0x00c8 0x0354 0x0000 2 0 +#define MX6UL_PAD_ENET1_RX_DATA1__CSI_DATA17 0x00c8 0x0354 0x0000 3 0 +#define MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX 0x00c8 0x0354 0x0584 4 1 +#define MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01 0x00c8 0x0354 0x0000 5 0 +#define MX6UL_PAD_ENET1_RX_DATA1__KPP_COL00 0x00c8 0x0354 0x0000 6 0 +#define MX6UL_PAD_ENET1_RX_DATA1__USDHC2_LCTL 0x00c8 0x0354 0x0000 8 0 +#define MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x00cc 0x0358 0x0000 0 0 +#define MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS 0x00cc 0x0358 0x0640 1 3 +#define MX6UL_PAD_ENET1_RX_EN__UART5_DTE_CTS 0x00cc 0x0358 0x0000 1 0 +#define MX6UL_PAD_ENET1_RX_EN__CSI_DATA18 0x00cc 0x0358 0x0000 3 0 +#define MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX 0x00cc 0x0358 0x0000 4 0 +#define MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02 0x00cc 0x0358 0x0000 5 0 +#define MX6UL_PAD_ENET1_RX_EN__KPP_ROW01 0x00cc 0x0358 0x0000 6 0 +#define MX6UL_PAD_ENET1_RX_EN__USDHC1_VSELECT 0x00cc 0x0358 0x0000 8 0 +#define MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x00d0 0x035c 0x0000 0 0 +#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DCE_CTS 0x00d0 0x035c 0x0000 1 0 +#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS 0x00d0 0x035c 0x0640 1 4 +#define MX6UL_PAD_ENET1_TX_DATA0__CSI_DATA19 0x00d0 0x035c 0x0000 3 0 +#define MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX 0x00d0 0x035c 0x0588 4 1 +#define MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03 0x00d0 0x035c 0x0000 5 0 +#define MX6UL_PAD_ENET1_TX_DATA0__KPP_COL01 0x00d0 0x035c 0x0000 6 0 +#define MX6UL_PAD_ENET1_TX_DATA0__USDHC2_VSELECT 0x00d0 0x035c 0x0000 8 0 +#define MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x00d4 0x0360 0x0000 0 0 +#define MX6UL_PAD_ENET1_TX_DATA1__UART6_DCE_CTS 0x00d4 0x0360 0x0000 1 0 +#define MX6UL_PAD_ENET1_TX_DATA1__UART6_DTE_RTS 0x00d4 0x0360 0x0648 1 2 +#define MX6UL_PAD_ENET1_TX_DATA1__PWM5_OUT 0x00d4 0x0360 0x0000 2 0 +#define MX6UL_PAD_ENET1_TX_DATA1__CSI_DATA20 0x00d4 0x0360 0x0000 3 0 +#define MX6UL_PAD_ENET1_TX_DATA1__ENET2_MDIO 0x00d4 0x0360 0x0580 4 1 +#define MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04 0x00d4 0x0360 0x0000 5 0 +#define MX6UL_PAD_ENET1_TX_DATA1__KPP_ROW02 0x00d4 0x0360 0x0000 6 0 +#define MX6UL_PAD_ENET1_TX_DATA1__WDOG1_WDOG_RST_B_DEB 0x00d4 0x0360 0x0000 8 0 +#define MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x00d8 0x0364 0x0000 0 0 +#define MX6UL_PAD_ENET1_TX_EN__UART6_DCE_RTS 0x00d8 0x0364 0x0648 1 3 +#define MX6UL_PAD_ENET1_TX_EN__UART6_DTE_CTS 0x00d8 0x0364 0x0000 1 0 +#define MX6UL_PAD_ENET1_TX_EN__PWM6_OUT 0x00d8 0x0364 0x0000 2 0 +#define MX6UL_PAD_ENET1_TX_EN__CSI_DATA21 0x00d8 0x0364 0x0000 3 0 +#define MX6UL_PAD_ENET1_TX_EN__ENET2_MDC 0x00d8 0x0364 0x0000 4 0 +#define MX6UL_PAD_ENET1_TX_EN__GPIO2_IO05 0x00d8 0x0364 0x0000 5 0 +#define MX6UL_PAD_ENET1_TX_EN__KPP_COL02 0x00d8 0x0364 0x0000 6 0 +#define MX6UL_PAD_ENET1_TX_EN__WDOG2_WDOG_RST_B_DEB 0x00d8 0x0364 0x0000 8 0 +#define MX6UL_PAD_ENET1_TX_CLK__ENET1_TX_CLK 0x00dc 0x0368 0x0000 0 0 +#define MX6UL_PAD_ENET1_TX_CLK__UART7_DCE_CTS 0x00dc 0x0368 0x0000 1 0 +#define MX6UL_PAD_ENET1_TX_CLK__UART7_DTE_RTS 0x00dc 0x0368 0x0650 1 0 +#define MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT 0x00dc 0x0368 0x0000 2 0 +#define MX6UL_PAD_ENET1_TX_CLK__CSI_DATA22 0x00dc 0x0368 0x0000 3 0 +#define MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x00dc 0x0368 0x0574 4 2 +#define MX6UL_PAD_ENET1_TX_CLK__GPIO2_IO06 0x00dc 0x0368 0x0000 5 0 +#define MX6UL_PAD_ENET1_TX_CLK__KPP_ROW03 0x00dc 0x0368 0x0000 6 0 +#define MX6UL_PAD_ENET1_TX_CLK__GPT1_CLK 0x00dc 0x0368 0x0000 8 0 +#define MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x00e0 0x036c 0x0000 0 0 +#define MX6UL_PAD_ENET1_RX_ER__UART7_DCE_RTS 0x00e0 0x036c 0x0650 1 1 +#define MX6UL_PAD_ENET1_RX_ER__UART7_DTE_CTS 0x00e0 0x036c 0x0000 1 0 +#define MX6UL_PAD_ENET1_RX_ER__PWM8_OUT 0x00e0 0x036c 0x0000 2 0 +#define MX6UL_PAD_ENET1_RX_ER__CSI_DATA23 0x00e0 0x036c 0x0000 3 0 +#define MX6UL_PAD_ENET1_RX_ER__EIM_CRE 0x00e0 0x036c 0x0000 4 0 +#define MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07 0x00e0 0x036c 0x0000 5 0 +#define MX6UL_PAD_ENET1_RX_ER__KPP_COL03 0x00e0 0x036c 0x0000 6 0 +#define MX6UL_PAD_ENET1_RX_ER__GPT1_CAPTURE2 0x00e0 0x036c 0x0000 8 0 +#define MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x00e4 0x0370 0x0000 0 0 +#define MX6UL_PAD_ENET2_RX_DATA0__UART6_DCE_TX 0x00e4 0x0370 0x0000 1 0 +#define MX6UL_PAD_ENET2_RX_DATA0__UART6_DTE_RX 0x00e4 0x0370 0x064c 1 1 +#define MX6UL_PAD_ENET2_RX_DATA0__SIM1_PORT0_TRXD 0x00e4 0x0370 0x0000 2 0 +#define MX6UL_PAD_ENET2_RX_DATA0__I2C3_SCL 0x00e4 0x0370 0x05b4 3 1 +#define MX6UL_PAD_ENET2_RX_DATA0__ENET1_MDIO 0x00e4 0x0370 0x0578 4 1 +#define MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x00e4 0x0370 0x0000 5 0 +#define MX6UL_PAD_ENET2_RX_DATA0__KPP_ROW04 0x00e4 0x0370 0x0000 6 0 +#define MX6UL_PAD_ENET2_RX_DATA0__USB_OTG1_PWR 0x00e4 0x0370 0x0000 8 0 +#define MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x00e8 0x0374 0x0000 0 0 +#define MX6UL_PAD_ENET2_RX_DATA1__UART6_DCE_RX 0x00e8 0x0374 0x064c 1 2 +#define MX6UL_PAD_ENET2_RX_DATA1__UART6_DTE_TX 0x00e8 0x0374 0x0000 1 0 +#define MX6UL_PAD_ENET2_RX_DATA1__SIM1_PORT0_cLK 0x00e8 0x0374 0x0000 2 0 +#define MX6UL_PAD_ENET2_RX_DATA1__I2C3_SDA 0x00e8 0x0374 0x05b8 3 1 +#define MX6UL_PAD_ENET2_RX_DATA1__ENET1_MDC 0x00e8 0x0374 0x0000 4 0 +#define MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x00e8 0x0374 0x0000 5 0 +#define MX6UL_PAD_ENET2_RX_DATA1__KPP_COL04 0x00e8 0x0374 0x0000 6 0 +#define MX6UL_PAD_ENET2_RX_DATA1__USB_OTG1_OC 0x00e8 0x0374 0x0000 8 0 +#define MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x00ec 0x0378 0x0000 0 0 +#define MX6UL_PAD_ENET2_RX_EN__UART7_DCE_TX 0x00ec 0x0378 0x0000 1 0 +#define MX6UL_PAD_ENET2_RX_EN__UART7_DTE_RX 0x00ec 0x0378 0x0654 1 0 +#define MX6UL_PAD_ENET2_RX_EN__SIM1_PORT0_RST_B 0x00ec 0x0378 0x0000 2 0 +#define MX6UL_PAD_ENET2_RX_EN__I2C4_SCL 0x00ec 0x0378 0x05bc 3 1 +#define MX6UL_PAD_ENET2_RX_EN__EIM_ADDR26 0x00ec 0x0378 0x0000 4 0 +#define MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x00ec 0x0378 0x0000 5 0 +#define MX6UL_PAD_ENET2_RX_EN__KPP_ROW05 0x00ec 0x0378 0x0000 6 0 +#define MX6UL_PAD_ENET2_RX_EN__ENET1_REF_CLK_25M 0x00ec 0x0378 0x0000 8 0 +#define MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x00f0 0x037c 0x0000 0 0 +#define MX6UL_PAD_ENET2_TX_DATA0__UART7_DCE_RX 0x00f0 0x037c 0x0654 1 1 +#define MX6UL_PAD_ENET2_TX_DATA0__UART7_DTE_TX 0x00f0 0x037c 0x0000 1 0 +#define MX6UL_PAD_ENET2_TX_DATA0__SIM1_PORT0_SVEN 0x00f0 0x037c 0x0000 2 0 +#define MX6UL_PAD_ENET2_TX_DATA0__I2C4_SDA 0x00f0 0x037c 0x05c0 3 1 +#define MX6UL_PAD_ENET2_TX_DATA0__EIM_EB_B02 0x00f0 0x037c 0x0000 4 0 +#define MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x00f0 0x037c 0x0000 5 0 +#define MX6UL_PAD_ENET2_TX_DATA0__KPP_COL05 0x00f0 0x037c 0x0000 6 0 +#define MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x00f4 0x0380 0x0000 0 0 +#define MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX 0x00f4 0x0380 0x0000 1 0 +#define MX6UL_PAD_ENET2_TX_DATA1__UART8_DTE_RX 0x00f4 0x0380 0x065c 1 0 +#define MX6UL_PAD_ENET2_TX_DATA1__SIM2_PORT0_TRXD 0x00f4 0x0380 0x0000 2 0 +#define MX6UL_PAD_ENET2_TX_DATA1__ECSPI4_SCLK 0x00f4 0x0380 0x0564 3 0 +#define MX6UL_PAD_ENET2_TX_DATA1__EIM_EB_B03 0x00f4 0x0380 0x0000 4 0 +#define MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12 0x00f4 0x0380 0x0000 5 0 +#define MX6UL_PAD_ENET2_TX_DATA1__KPP_ROW06 0x00f4 0x0380 0x0000 6 0 +#define MX6UL_PAD_ENET2_TX_DATA1__USB_OTG2_PWR 0x00f4 0x0380 0x0000 8 0 +#define MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x00f8 0x0384 0x0000 0 0 +#define MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX 0x00f8 0x0384 0x065c 1 1 +#define MX6UL_PAD_ENET2_TX_EN__UART8_DTE_TX 0x00f8 0x0384 0x0000 1 0 +#define MX6UL_PAD_ENET2_TX_EN__SIM2_PORT0_cLK 0x00f8 0x0384 0x0000 2 0 +#define MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI 0x00f8 0x0384 0x056c 3 0 +#define MX6UL_PAD_ENET2_TX_EN__EIM_ACLK_FREERUN 0x00f8 0x0384 0x0000 4 0 +#define MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x00f8 0x0384 0x0000 5 0 +#define MX6UL_PAD_ENET2_TX_EN__KPP_COL06 0x00f8 0x0384 0x0000 6 0 +#define MX6UL_PAD_ENET2_TX_EN__USB_OTG2_OC 0x00f8 0x0384 0x0000 8 0 +#define MX6UL_PAD_ENET2_TX_CLK__ENET2_TX_CLK 0x00fc 0x0388 0x0000 0 0 +#define MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS 0x00fc 0x0388 0x0000 1 0 +#define MX6UL_PAD_ENET2_TX_CLK__UART8_DTE_RTS 0x00fc 0x0388 0x0658 1 0 +#define MX6UL_PAD_ENET2_TX_CLK__SIM2_PORT0_RST_B 0x00fc 0x0388 0x0000 2 0 +#define MX6UL_PAD_ENET2_TX_CLK__ECSPI4_MISO 0x00fc 0x0388 0x0568 3 0 +#define MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x00fc 0x0388 0x057c 4 2 +#define MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14 0x00fc 0x0388 0x0000 5 0 +#define MX6UL_PAD_ENET2_TX_CLK__KPP_ROW07 0x00fc 0x0388 0x0000 6 0 +#define MX6UL_PAD_ENET2_TX_CLK__ANATOP_OTG2_ID 0x00fc 0x0388 0x0000 8 0 +#define MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x0100 0x038c 0x0000 0 0 +#define MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS 0x0100 0x038c 0x0658 1 1 +#define MX6UL_PAD_ENET2_RX_ER__UART8_DTE_CTS 0x0100 0x038c 0x0000 1 0 +#define MX6UL_PAD_ENET2_RX_ER__SIM2_PORT0_SVEN 0x0100 0x038c 0x0000 2 0 +#define MX6UL_PAD_ENET2_RX_ER__ECSPI4_SS0 0x0100 0x038c 0x0000 3 0 +#define MX6UL_PAD_ENET2_RX_ER__EIM_ADDR25 0x0100 0x038c 0x0000 4 0 +#define MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x0100 0x038c 0x0000 5 0 +#define MX6UL_PAD_ENET2_RX_ER__KPP_COL07 0x0100 0x038c 0x0000 6 0 +#define MX6UL_PAD_ENET2_RX_ER__WDOG1_WDOG_ANY 0x0100 0x038c 0x0000 8 0 +#define MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x0104 0x0390 0x0000 0 0 +#define MX6UL_PAD_LCD_CLK__LCDIF_WR_RWN 0x0104 0x0390 0x0000 1 0 +#define MX6UL_PAD_LCD_CLK__UART4_DCE_TX 0x0104 0x0390 0x0000 2 0 +#define MX6UL_PAD_LCD_CLK__UART4_DTE_RX 0x0104 0x0390 0x063c 2 2 +#define MX6UL_PAD_LCD_CLK__SAI3_MCLK 0x0104 0x0390 0x0000 3 0 +#define MX6UL_PAD_LCD_CLK__EIM_CS2_B 0x0104 0x0390 0x0000 4 0 +#define MX6UL_PAD_LCD_CLK__GPIO3_IO00 0x0104 0x0390 0x0000 5 0 +#define MX6UL_PAD_LCD_CLK__WDOG1_WDOG_RST_B_DEB 0x0104 0x0390 0x0000 8 0 +#define MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x0108 0x0394 0x0000 0 0 +#define MX6UL_PAD_LCD_ENABLE__LCDIF_RD_E 0x0108 0x0394 0x0000 1 0 +#define MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX 0x0108 0x0394 0x063c 2 3 +#define MX6UL_PAD_LCD_ENABLE__UART4_DTE_TX 0x0108 0x0394 0x0000 2 0 +#define MX6UL_PAD_LCD_ENABLE__SAI3_TX_SYNC 0x0108 0x0394 0x060c 3 0 +#define MX6UL_PAD_LCD_ENABLE__EIM_CS3_B 0x0108 0x0394 0x0000 4 0 +#define MX6UL_PAD_LCD_ENABLE__GPIO3_IO01 0x0108 0x0394 0x0000 5 0 +#define MX6UL_PAD_LCD_ENABLE__ECSPI2_RDY 0x0108 0x0394 0x0000 8 0 +#define MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x010c 0x0398 0x05dc 0 0 +#define MX6UL_PAD_LCD_HSYNC__LCDIF_RS 0x010c 0x0398 0x0000 1 0 +#define MX6UL_PAD_LCD_HSYNC__UART4_DCE_CTS 0x010c 0x0398 0x0000 2 0 +#define MX6UL_PAD_LCD_HSYNC__UART4_DTE_RTS 0x010c 0x0398 0x0638 2 2 +#define MX6UL_PAD_LCD_HSYNC__SAI3_TX_BCLK 0x010c 0x0398 0x0608 3 0 +#define MX6UL_PAD_LCD_HSYNC__WDOG3_WDOG_RST_B_DEB 0x010c 0x0398 0x0000 4 0 +#define MX6UL_PAD_LCD_HSYNC__GPIO3_IO02 0x010c 0x0398 0x0000 5 0 +#define MX6UL_PAD_LCD_HSYNC__ECSPI2_SS1 0x010c 0x0398 0x0000 8 0 +#define MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x0110 0x039c 0x0000 0 0 +#define MX6UL_PAD_LCD_VSYNC__LCDIF_BUSY 0x0110 0x039c 0x05dc 1 1 +#define MX6UL_PAD_LCD_VSYNC__UART4_DCE_RTS 0x0110 0x039c 0x0638 2 3 +#define MX6UL_PAD_LCD_VSYNC__UART4_DTE_CTS 0x0110 0x039c 0x0000 2 0 +#define MX6UL_PAD_LCD_VSYNC__SAI3_RX_DATA 0x0110 0x039c 0x0000 3 0 +#define MX6UL_PAD_LCD_VSYNC__WDOG2_WDOG_B 0x0110 0x039c 0x0000 4 0 +#define MX6UL_PAD_LCD_VSYNC__GPIO3_IO03 0x0110 0x039c 0x0000 5 0 +#define MX6UL_PAD_LCD_VSYNC__ECSPI2_SS2 0x0110 0x039c 0x0000 8 0 +#define MX6UL_PAD_LCD_RESET__LCDIF_RESET 0x0114 0x03a0 0x0000 0 0 +#define MX6UL_PAD_LCD_RESET__LCDIF_CS 0x0114 0x03a0 0x0000 1 0 +#define MX6UL_PAD_LCD_RESET__CA7_MX6UL_EVENTI 0x0114 0x03a0 0x0000 2 0 +#define MX6UL_PAD_LCD_RESET__SAI3_TX_DATA 0x0114 0x03a0 0x0000 3 0 +#define MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x0114 0x03a0 0x0000 4 0 +#define MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x0114 0x03a0 0x0000 5 0 +#define MX6UL_PAD_LCD_RESET__ECSPI2_SS3 0x0114 0x03a0 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x0118 0x03a4 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA00__PWM1_OUT 0x0118 0x03a4 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA00__ENET1_1588_EVENT2_IN 0x0118 0x03a4 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA00__I2C3_SDA 0x0118 0x03a4 0x05b8 4 2 +#define MX6UL_PAD_LCD_DATA00__GPIO3_IO05 0x0118 0x03a4 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA00__SRC_BT_CFG00 0x0118 0x03a4 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA00__SAI1_MCLK 0x0118 0x03a4 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x011c 0x03a8 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA01__PWM2_OUT 0x011c 0x03a8 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA01__ENET1_1588_EVENT2_OUT 0x011c 0x03a8 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA01__I2C3_SCL 0x011c 0x03a8 0x05b4 4 2 +#define MX6UL_PAD_LCD_DATA01__GPIO3_IO06 0x011c 0x03a8 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA01__SRC_BT_CFG01 0x011c 0x03a8 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA01__SAI1_TX_SYNC 0x011c 0x03a8 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x0120 0x03ac 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA02__PWM3_OUT 0x0120 0x03ac 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA02__ENET1_1588_EVENT3_IN 0x0120 0x03ac 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA02__I2C4_SDA 0x0120 0x03ac 0x05c0 4 2 +#define MX6UL_PAD_LCD_DATA02__GPIO3_IO07 0x0120 0x03ac 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA02__SRC_BT_CFG02 0x0120 0x03ac 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA02__SAI1_TX_BCLK 0x0120 0x03ac 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x0124 0x03b0 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA03__PWM4_OUT 0x0124 0x03b0 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA03__ENET1_1588_EVENT3_OUT 0x0124 0x03b0 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA03__I2C4_SCL 0x0124 0x03b0 0x05bc 4 2 +#define MX6UL_PAD_LCD_DATA03__GPIO3_IO08 0x0124 0x03b0 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA03__SRC_BT_CFG03 0x0124 0x03b0 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA03__SAI1_RX_DATA 0x0124 0x03b0 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x0128 0x03b4 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA04__UART8_DCE_CTS 0x0128 0x03b4 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA04__UART8_DTE_RTS 0x0128 0x03b4 0x0658 1 2 +#define MX6UL_PAD_LCD_DATA04__ENET2_1588_EVENT2_IN 0x0128 0x03b4 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA04__SPDIF_SR_CLK 0x0128 0x03b4 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA04__GPIO3_IO09 0x0128 0x03b4 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA04__SRC_BT_CFG04 0x0128 0x03b4 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA04__SAI1_TX_DATA 0x0128 0x03b4 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x012c 0x03b8 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA05__UART8_DCE_RTS 0x012c 0x03b8 0x0658 1 3 +#define MX6UL_PAD_LCD_DATA05__UART8_DTE_CTS 0x012c 0x03b8 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA05__ENET2_1588_EVENT2_OUT 0x012c 0x03b8 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA05__SPDIF_OUT 0x012c 0x03b8 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA05__GPIO3_IO10 0x012c 0x03b8 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA05__SRC_BT_CFG05 0x012c 0x03b8 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA05__ECSPI1_SS1 0x012c 0x03b8 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x0130 0x03bc 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA06__UART7_DCE_CTS 0x0130 0x03bc 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA06__UART7_DTE_RTS 0x0130 0x03bc 0x0650 1 2 +#define MX6UL_PAD_LCD_DATA06__ENET2_1588_EVENT3_IN 0x0130 0x03bc 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA06__SPDIF_LOCK 0x0130 0x03bc 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA06__GPIO3_IO11 0x0130 0x03bc 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA06__SRC_BT_CFG06 0x0130 0x03bc 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA06__ECSPI1_SS2 0x0130 0x03bc 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x0134 0x03c0 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA07__UART7_DCE_RTS 0x0134 0x03c0 0x0650 1 3 +#define MX6UL_PAD_LCD_DATA07__UART7_DTE_CTS 0x0134 0x03c0 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA07__ENET2_1588_EVENT3_OUT 0x0134 0x03c0 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA07__SPDIF_EXT_CLK 0x0134 0x03c0 0x061c 4 0 +#define MX6UL_PAD_LCD_DATA07__GPIO3_IO12 0x0134 0x03c0 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA07__SRC_BT_CFG07 0x0134 0x03c0 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA07__ECSPI1_SS3 0x0134 0x03c0 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x0138 0x03c4 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA08__SPDIF_IN 0x0138 0x03c4 0x0618 1 2 +#define MX6UL_PAD_LCD_DATA08__CSI_DATA16 0x0138 0x03c4 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA08__EIM_DATA00 0x0138 0x03c4 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA08__GPIO3_IO13 0x0138 0x03c4 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA08__SRC_BT_CFG08 0x0138 0x03c4 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA08__FLEXCAN1_TX 0x0138 0x03c4 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x013c 0x03c8 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA09__SAI3_MCLK 0x013c 0x03c8 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA09__CSI_DATA17 0x013c 0x03c8 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA09__EIM_DATA01 0x013c 0x03c8 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA09__GPIO3_IO14 0x013c 0x03c8 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA09__SRC_BT_CFG09 0x013c 0x03c8 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX 0x013c 0x03c8 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x0140 0x03cc 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA10__SAI3_RX_SYNC 0x0140 0x03cc 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA10__CSI_DATA18 0x0140 0x03cc 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA10__EIM_DATA02 0x0140 0x03cc 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA10__GPIO3_IO15 0x0140 0x03cc 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA10__SRC_BT_CFG10 0x0140 0x03cc 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA10__FLEXCAN2_TX 0x0140 0x03cc 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x0144 0x03d0 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA11__SAI3_RX_BCLK 0x0144 0x03d0 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA11__CSI_DATA19 0x0144 0x03d0 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA11__EIM_DATA03 0x0144 0x03d0 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA11__GPIO3_IO16 0x0144 0x03d0 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA11__SRC_BT_CFG11 0x0144 0x03d0 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA11__FLEXCAN2_RX 0x0144 0x03d0 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x0148 0x03d4 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA12__SAI3_TX_SYNC 0x0148 0x03d4 0x060c 1 1 +#define MX6UL_PAD_LCD_DATA12__CSI_DATA20 0x0148 0x03d4 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA12__EIM_DATA04 0x0148 0x03d4 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA12__GPIO3_IO17 0x0148 0x03d4 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA12__SRC_BT_CFG12 0x0148 0x03d4 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA12__ECSPI1_RDY 0x0148 0x03d4 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x014c 0x03d8 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA13__SAI3_TX_BCLK 0x014c 0x03d8 0x0608 1 1 +#define MX6UL_PAD_LCD_DATA13__CSI_DATA21 0x014c 0x03d8 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA13__EIM_DATA05 0x014c 0x03d8 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA13__GPIO3_IO18 0x014c 0x03d8 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA13__SRC_BT_CFG13 0x014c 0x03d8 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA13__USDHC2_RESET_B 0x014c 0x03d8 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x0150 0x03dc 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA14__SAI3_RX_DATA 0x0150 0x03dc 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA14__CSI_DATA22 0x0150 0x03dc 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA14__EIM_DATA06 0x0150 0x03dc 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA14__GPIO3_IO19 0x0150 0x03dc 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA14__SRC_BT_CFG14 0x0150 0x03dc 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA14__USDHC2_DATA4 0x0150 0x03dc 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x0154 0x03e0 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA15__SAI3_TX_DATA 0x0154 0x03e0 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA15__CSI_DATA23 0x0154 0x03e0 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA15__EIM_DATA07 0x0154 0x03e0 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA15__GPIO3_IO20 0x0154 0x03e0 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA15__SRC_BT_CFG15 0x0154 0x03e0 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA15__USDHC2_DATA5 0x0154 0x03e0 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x0158 0x03e4 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA16__UART7_DCE_TX 0x0158 0x03e4 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA16__UART7_DTE_RX 0x0158 0x03e4 0x0654 1 2 +#define MX6UL_PAD_LCD_DATA16__CSI_DATA01 0x0158 0x03e4 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA16__EIM_DATA08 0x0158 0x03e4 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA16__GPIO3_IO21 0x0158 0x03e4 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA16__SRC_BT_CFG24 0x0158 0x03e4 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA16__USDHC2_DATA6 0x0158 0x03e4 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x015c 0x03e8 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA17__UART7_DCE_RX 0x015c 0x03e8 0x0654 1 3 +#define MX6UL_PAD_LCD_DATA17__UART7_DTE_TX 0x015c 0x03e8 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA17__CSI_DATA00 0x015c 0x03e8 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA17__EIM_DATA09 0x015c 0x03e8 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA17__GPIO3_IO22 0x015c 0x03e8 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA17__SRC_BT_CFG25 0x015c 0x03e8 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA17__USDHC2_DATA7 0x015c 0x03e8 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x0160 0x03ec 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA18__PWM5_OUT 0x0160 0x03ec 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA18__CA7_MX6UL_EVENTO 0x0160 0x03ec 0x0000 2 0 +#define MX6UL_PAD_LCD_DATA18__CSI_DATA10 0x0160 0x03ec 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA18__EIM_DATA10 0x0160 0x03ec 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x0160 0x03ec 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA18__SRC_BT_CFG26 0x0160 0x03ec 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA18__USDHC2_CMD 0x0160 0x03ec 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA19__EIM_DATA11 0x0164 0x03f0 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA19__GPIO3_IO24 0x0164 0x03f0 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA19__SRC_BT_CFG27 0x0164 0x03f0 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA19__USDHC2_CLK 0x0164 0x03f0 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x0164 0x03f0 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA19__PWM6_OUT 0x0164 0x03f0 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA19__WDOG1_WDOG_ANY 0x0164 0x03f0 0x0000 2 0 +#define MX6UL_PAD_LCD_DATA19__CSI_DATA11 0x0164 0x03f0 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA20__EIM_DATA12 0x0168 0x03f4 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA20__GPIO3_IO25 0x0168 0x03f4 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA20__SRC_BT_CFG28 0x0168 0x03f4 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA20__USDHC2_DATA0 0x0168 0x03f4 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x0168 0x03f4 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA20__UART8_DCE_TX 0x0168 0x03f4 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA20__UART8_DTE_RX 0x0168 0x03f4 0x065c 1 2 +#define MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x0168 0x03f4 0x0534 2 0 +#define MX6UL_PAD_LCD_DATA20__CSI_DATA12 0x0168 0x03f4 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x016c 0x03f8 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA21__UART8_DCE_RX 0x016c 0x03f8 0x065c 1 3 +#define MX6UL_PAD_LCD_DATA21__UART8_DTE_TX 0x016c 0x03f8 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA21__ECSPI1_SS0 0x016c 0x03f8 0x0000 2 0 +#define MX6UL_PAD_LCD_DATA21__CSI_DATA13 0x016c 0x03f8 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA21__EIM_DATA13 0x016c 0x03f8 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x016c 0x03f8 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA21__SRC_BT_CFG29 0x016c 0x03f8 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA21__USDHC2_DATA1 0x016c 0x03f8 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x0170 0x03fc 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA22__MQS_RIGHT 0x0170 0x03fc 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x0170 0x03fc 0x053c 2 0 +#define MX6UL_PAD_LCD_DATA22__CSI_DATA14 0x0170 0x03fc 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA22__EIM_DATA14 0x0170 0x03fc 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA22__GPIO3_IO27 0x0170 0x03fc 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA22__SRC_BT_CFG30 0x0170 0x03fc 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA22__USDHC2_DATA2 0x0170 0x03fc 0x0000 8 0 +#define MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x0174 0x0400 0x0000 0 0 +#define MX6UL_PAD_LCD_DATA23__MQS_LEFT 0x0174 0x0400 0x0000 1 0 +#define MX6UL_PAD_LCD_DATA23__ECSPI1_MISO 0x0174 0x0400 0x0538 2 0 +#define MX6UL_PAD_LCD_DATA23__CSI_DATA15 0x0174 0x0400 0x0000 3 0 +#define MX6UL_PAD_LCD_DATA23__EIM_DATA15 0x0174 0x0400 0x0000 4 0 +#define MX6UL_PAD_LCD_DATA23__GPIO3_IO28 0x0174 0x0400 0x0000 5 0 +#define MX6UL_PAD_LCD_DATA23__SRC_BT_CFG31 0x0174 0x0400 0x0000 6 0 +#define MX6UL_PAD_LCD_DATA23__USDHC2_DATA3 0x0174 0x0400 0x0000 8 0 +#define MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0x0178 0x0404 0x0000 0 0 +#define MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x0178 0x0404 0x0670 1 2 +#define MX6UL_PAD_NAND_RE_B__QSPI_B_SCLK 0x0178 0x0404 0x0000 2 0 +#define MX6UL_PAD_NAND_RE_B__KPP_ROW00 0x0178 0x0404 0x0000 3 0 +#define MX6UL_PAD_NAND_RE_B__EIM_EB_B00 0x0178 0x0404 0x0000 4 0 +#define MX6UL_PAD_NAND_RE_B__GPIO4_IO00 0x0178 0x0404 0x0000 5 0 +#define MX6UL_PAD_NAND_RE_B__ECSPI3_SS2 0x0178 0x0404 0x0000 8 0 +#define MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0x017c 0x0408 0x0000 0 0 +#define MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x017c 0x0408 0x0678 1 2 +#define MX6UL_PAD_NAND_WE_B__QSPI_B_SS0_B 0x017c 0x0408 0x0000 2 0 +#define MX6UL_PAD_NAND_WE_B__KPP_COL00 0x017c 0x0408 0x0000 3 0 +#define MX6UL_PAD_NAND_WE_B__EIM_EB_B01 0x017c 0x0408 0x0000 4 0 +#define MX6UL_PAD_NAND_WE_B__GPIO4_IO01 0x017c 0x0408 0x0000 5 0 +#define MX6UL_PAD_NAND_WE_B__ECSPI3_SS3 0x017c 0x0408 0x0000 8 0 +#define MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x0180 0x040c 0x0000 0 0 +#define MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x0180 0x040c 0x067c 1 2 +#define MX6UL_PAD_NAND_DATA00__QSPI_B_SS1_B 0x0180 0x040c 0x0000 2 0 +#define MX6UL_PAD_NAND_DATA00__KPP_ROW01 0x0180 0x040c 0x0000 3 0 +#define MX6UL_PAD_NAND_DATA00__EIM_AD08 0x0180 0x040c 0x0000 4 0 +#define MX6UL_PAD_NAND_DATA00__GPIO4_IO02 0x0180 0x040c 0x0000 5 0 +#define MX6UL_PAD_NAND_DATA00__ECSPI4_RDY 0x0180 0x040c 0x0000 8 0 +#define MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0x0184 0x0410 0x0000 0 0 +#define MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x0184 0x0410 0x0680 1 2 +#define MX6UL_PAD_NAND_DATA01__QSPI_B_DQS 0x0184 0x0410 0x0000 2 0 +#define MX6UL_PAD_NAND_DATA01__KPP_COL01 0x0184 0x0410 0x0000 3 0 +#define MX6UL_PAD_NAND_DATA01__EIM_AD09 0x0184 0x0410 0x0000 4 0 +#define MX6UL_PAD_NAND_DATA01__GPIO4_IO03 0x0184 0x0410 0x0000 5 0 +#define MX6UL_PAD_NAND_DATA01__ECSPI4_SS1 0x0184 0x0410 0x0000 8 0 +#define MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0x0188 0x0414 0x0000 0 0 +#define MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x0188 0x0414 0x0684 1 1 +#define MX6UL_PAD_NAND_DATA02__QSPI_B_DATA00 0x0188 0x0414 0x0000 2 0 +#define MX6UL_PAD_NAND_DATA02__KPP_ROW02 0x0188 0x0414 0x0000 3 0 +#define MX6UL_PAD_NAND_DATA02__EIM_AD10 0x0188 0x0414 0x0000 4 0 +#define MX6UL_PAD_NAND_DATA02__GPIO4_IO04 0x0188 0x0414 0x0000 5 0 +#define MX6UL_PAD_NAND_DATA02__ECSPI4_SS2 0x0188 0x0414 0x0000 8 0 +#define MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0x018c 0x0418 0x0000 0 0 +#define MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x018c 0x0418 0x0688 1 2 +#define MX6UL_PAD_NAND_DATA03__QSPI_B_DATA01 0x018c 0x0418 0x0000 2 0 +#define MX6UL_PAD_NAND_DATA03__KPP_COL02 0x018c 0x0418 0x0000 3 0 +#define MX6UL_PAD_NAND_DATA03__EIM_AD11 0x018c 0x0418 0x0000 4 0 +#define MX6UL_PAD_NAND_DATA03__GPIO4_IO05 0x018c 0x0418 0x0000 5 0 +#define MX6UL_PAD_NAND_DATA03__ECSPI4_SS3 0x018c 0x0418 0x0000 8 0 +#define MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0x0190 0x041c 0x0000 0 0 +#define MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x0190 0x041c 0x068c 1 1 +#define MX6UL_PAD_NAND_DATA04__QSPI_B_DATA02 0x0190 0x041c 0x0000 2 0 +#define MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK 0x0190 0x041c 0x0564 3 1 +#define MX6UL_PAD_NAND_DATA04__EIM_AD12 0x0190 0x041c 0x0000 4 0 +#define MX6UL_PAD_NAND_DATA04__GPIO4_IO06 0x0190 0x041c 0x0000 5 0 +#define MX6UL_PAD_NAND_DATA04__UART2_DCE_TX 0x0190 0x041c 0x0000 8 0 +#define MX6UL_PAD_NAND_DATA04__UART2_DTE_RX 0x0190 0x041c 0x062c 8 2 +#define MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0x0194 0x0420 0x0000 0 0 +#define MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x0194 0x0420 0x0690 1 1 +#define MX6UL_PAD_NAND_DATA05__QSPI_B_DATA03 0x0194 0x0420 0x0000 2 0 +#define MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI 0x0194 0x0420 0x056c 3 1 +#define MX6UL_PAD_NAND_DATA05__EIM_AD13 0x0194 0x0420 0x0000 4 0 +#define MX6UL_PAD_NAND_DATA05__GPIO4_IO07 0x0194 0x0420 0x0000 5 0 +#define MX6UL_PAD_NAND_DATA05__UART2_DCE_RX 0x0194 0x0420 0x062c 8 3 +#define MX6UL_PAD_NAND_DATA05__UART2_DTE_TX 0x0194 0x0420 0x0000 8 0 +#define MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0x0198 0x0424 0x0000 0 0 +#define MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x0198 0x0424 0x0694 1 1 +#define MX6UL_PAD_NAND_DATA06__SAI2_RX_BCLK 0x0198 0x0424 0x0000 2 0 +#define MX6UL_PAD_NAND_DATA06__ECSPI4_MISO 0x0198 0x0424 0x0568 3 1 +#define MX6UL_PAD_NAND_DATA06__EIM_AD14 0x0198 0x0424 0x0000 4 0 +#define MX6UL_PAD_NAND_DATA06__GPIO4_IO08 0x0198 0x0424 0x0000 5 0 +#define MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS 0x0198 0x0424 0x0000 8 0 +#define MX6UL_PAD_NAND_DATA06__UART2_DTE_RTS 0x0198 0x0424 0x0628 8 4 +#define MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0x019c 0x0428 0x0000 0 0 +#define MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x019c 0x0428 0x0698 1 1 +#define MX6UL_PAD_NAND_DATA07__QSPI_A_SS1_B 0x019c 0x0428 0x0000 2 0 +#define MX6UL_PAD_NAND_DATA07__ECSPI4_SS0 0x019c 0x0428 0x0000 3 0 +#define MX6UL_PAD_NAND_DATA07__EIM_AD15 0x019c 0x0428 0x0000 4 0 +#define MX6UL_PAD_NAND_DATA07__GPIO4_IO09 0x019c 0x0428 0x0000 5 0 +#define MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS 0x019c 0x0428 0x0628 8 5 +#define MX6UL_PAD_NAND_DATA07__UART2_DTE_CTS 0x019c 0x0428 0x0000 8 0 +#define MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0x01a0 0x042c 0x0000 0 0 +#define MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x01a0 0x042c 0x0000 1 0 +#define MX6UL_PAD_NAND_ALE__QSPI_A_DQS 0x01a0 0x042c 0x0000 2 0 +#define MX6UL_PAD_NAND_ALE__PWM3_OUT 0x01a0 0x042c 0x0000 3 0 +#define MX6UL_PAD_NAND_ALE__EIM_ADDR17 0x01a0 0x042c 0x0000 4 0 +#define MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x01a0 0x042c 0x0000 5 0 +#define MX6UL_PAD_NAND_ALE__ECSPI3_SS1 0x01a0 0x042c 0x0000 8 0 +#define MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0x01a4 0x0430 0x0000 0 0 +#define MX6UL_PAD_NAND_WP_B__USDHC1_RESET_B 0x01a4 0x0430 0x0000 1 0 +#define MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x01a4 0x0430 0x0000 2 0 +#define MX6UL_PAD_NAND_WP_B__PWM4_OUT 0x01a4 0x0430 0x0000 3 0 +#define MX6UL_PAD_NAND_WP_B__EIM_BCLK 0x01a4 0x0430 0x0000 4 0 +#define MX6UL_PAD_NAND_WP_B__GPIO4_IO11 0x01a4 0x0430 0x0000 5 0 +#define MX6UL_PAD_NAND_WP_B__ECSPI3_RDY 0x01a4 0x0430 0x0000 8 0 +#define MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0x01a8 0x0434 0x0000 0 0 +#define MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x01a8 0x0434 0x0000 1 0 +#define MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x01a8 0x0434 0x0000 2 0 +#define MX6UL_PAD_NAND_READY_B__ECSPI3_SS0 0x01a8 0x0434 0x0000 3 0 +#define MX6UL_PAD_NAND_READY_B__EIM_CS1_B 0x01a8 0x0434 0x0000 4 0 +#define MX6UL_PAD_NAND_READY_B__GPIO4_IO12 0x01a8 0x0434 0x0000 5 0 +#define MX6UL_PAD_NAND_READY_B__UART3_DCE_TX 0x01a8 0x0434 0x0000 8 0 +#define MX6UL_PAD_NAND_READY_B__UART3_DTE_RX 0x01a8 0x0434 0x0634 8 2 +#define MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0x01ac 0x0438 0x0000 0 0 +#define MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x01ac 0x0438 0x0000 1 0 +#define MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x01ac 0x0438 0x0000 2 0 +#define MX6UL_PAD_NAND_CE0_B__ECSPI3_SCLK 0x01ac 0x0438 0x0554 3 1 +#define MX6UL_PAD_NAND_CE0_B__EIM_DTACK_B 0x01ac 0x0438 0x0000 4 0 +#define MX6UL_PAD_NAND_CE0_B__GPIO4_IO13 0x01ac 0x0438 0x0000 5 0 +#define MX6UL_PAD_NAND_CE0_B__UART3_DCE_RX 0x01ac 0x0438 0x0634 8 3 +#define MX6UL_PAD_NAND_CE0_B__UART3_DTE_TX 0x01ac 0x0438 0x0000 8 0 +#define MX6UL_PAD_NAND_CE1_B__RAWNAND_CE1_B 0x01b0 0x043c 0x0000 0 0 +#define MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x01b0 0x043c 0x0000 1 0 +#define MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x01b0 0x043c 0x0000 2 0 +#define MX6UL_PAD_NAND_CE1_B__ECSPI3_MOSI 0x01b0 0x043c 0x055c 3 1 +#define MX6UL_PAD_NAND_CE1_B__EIM_ADDR18 0x01b0 0x043c 0x0000 4 0 +#define MX6UL_PAD_NAND_CE1_B__GPIO4_IO14 0x01b0 0x043c 0x0000 5 0 +#define MX6UL_PAD_NAND_CE1_B__UART3_DCE_CTS 0x01b0 0x043c 0x0000 8 0 +#define MX6UL_PAD_NAND_CE1_B__UART3_DTE_RTS 0x01b0 0x043c 0x0630 8 2 +#define MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0x01b4 0x0440 0x0000 0 0 +#define MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x01b4 0x0440 0x0000 1 0 +#define MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x01b4 0x0440 0x0000 2 0 +#define MX6UL_PAD_NAND_CLE__ECSPI3_MISO 0x01b4 0x0440 0x0558 3 1 +#define MX6UL_PAD_NAND_CLE__EIM_ADDR16 0x01b4 0x0440 0x0000 4 0 +#define MX6UL_PAD_NAND_CLE__GPIO4_IO15 0x01b4 0x0440 0x0000 5 0 +#define MX6UL_PAD_NAND_CLE__UART3_DCE_RTS 0x01b4 0x0440 0x0630 8 3 +#define MX6UL_PAD_NAND_CLE__UART3_DTE_CTS 0x01b4 0x0440 0x0000 8 0 +#define MX6UL_PAD_NAND_DQS__RAWNAND_DQS 0x01b8 0x0444 0x0000 0 0 +#define MX6UL_PAD_NAND_DQS__CSI_FIELD 0x01b8 0x0444 0x0530 1 1 +#define MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x01b8 0x0444 0x0000 2 0 +#define MX6UL_PAD_NAND_DQS__PWM5_OUT 0x01b8 0x0444 0x0000 3 0 +#define MX6UL_PAD_NAND_DQS__EIM_WAIT 0x01b8 0x0444 0x0000 4 0 +#define MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x01b8 0x0444 0x0000 5 0 +#define MX6UL_PAD_NAND_DQS__SDMA_EXT_EVENT01 0x01b8 0x0444 0x0000 6 0 +#define MX6UL_PAD_NAND_DQS__SPDIF_EXT_CLK 0x01b8 0x0444 0x0000 8 0 +#define MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x01bc 0x0448 0x0000 0 0 +#define MX6UL_PAD_SD1_CMD__GPT2_COMPARE1 0x01bc 0x0448 0x0000 1 0 +#define MX6UL_PAD_SD1_CMD__SAI2_RX_SYNC 0x01bc 0x0448 0x0000 2 0 +#define MX6UL_PAD_SD1_CMD__SPDIF_OUT 0x01bc 0x0448 0x0000 3 0 +#define MX6UL_PAD_SD1_CMD__EIM_ADDR19 0x01bc 0x0448 0x0000 4 0 +#define MX6UL_PAD_SD1_CMD__GPIO2_IO16 0x01bc 0x0448 0x0000 5 0 +#define MX6UL_PAD_SD1_CMD__SDMA_EXT_EVENT00 0x01bc 0x0448 0x0000 6 0 +#define MX6UL_PAD_SD1_CMD__USB_OTG1_PWR 0x01bc 0x0448 0x0000 8 0 +#define MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x01c0 0x044c 0x0000 0 0 +#define MX6UL_PAD_SD1_CLK__GPT2_COMPARE2 0x01c0 0x044c 0x0000 1 0 +#define MX6UL_PAD_SD1_CLK__SAI2_MCLK 0x01c0 0x044c 0x0000 2 0 +#define MX6UL_PAD_SD1_CLK__SPDIF_IN 0x01c0 0x044c 0x0618 3 3 +#define MX6UL_PAD_SD1_CLK__EIM_ADDR20 0x01c0 0x044c 0x0000 4 0 +#define MX6UL_PAD_SD1_CLK__GPIO2_IO17 0x01c0 0x044c 0x0000 5 0 +#define MX6UL_PAD_SD1_CLK__USB_OTG1_OC 0x01c0 0x044c 0x0000 8 0 +#define MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x01c4 0x0450 0x0000 0 0 +#define MX6UL_PAD_SD1_DATA0__GPT2_COMPARE3 0x01c4 0x0450 0x0000 1 0 +#define MX6UL_PAD_SD1_DATA0__SAI2_TX_SYNC 0x01c4 0x0450 0x05fc 2 1 +#define MX6UL_PAD_SD1_DATA0__FLEXCAN1_TX 0x01c4 0x0450 0x0000 3 0 +#define MX6UL_PAD_SD1_DATA0__EIM_ADDR21 0x01c4 0x0450 0x0000 4 0 +#define MX6UL_PAD_SD1_DATA0__GPIO2_IO18 0x01c4 0x0450 0x0000 5 0 +#define MX6UL_PAD_SD1_DATA0__ANATOP_OTG1_ID 0x01c4 0x0450 0x0000 8 0 +#define MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x01c8 0x0454 0x0000 0 0 +#define MX6UL_PAD_SD1_DATA1__GPT2_CLK 0x01c8 0x0454 0x05a0 1 1 +#define MX6UL_PAD_SD1_DATA1__SAI2_TX_BCLK 0x01c8 0x0454 0x05f8 2 1 +#define MX6UL_PAD_SD1_DATA1__FLEXCAN1_RX 0x01c8 0x0454 0x0584 3 3 +#define MX6UL_PAD_SD1_DATA1__EIM_ADDR22 0x01c8 0x0454 0x0000 4 0 +#define MX6UL_PAD_SD1_DATA1__GPIO2_IO19 0x01c8 0x0454 0x0000 5 0 +#define MX6UL_PAD_SD1_DATA1__USB_OTG2_PWR 0x01c8 0x0454 0x0000 8 0 +#define MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x01cc 0x0458 0x0000 0 0 +#define MX6UL_PAD_SD1_DATA2__GPT2_CAPTURE1 0x01cc 0x0458 0x0598 1 1 +#define MX6UL_PAD_SD1_DATA2__SAI2_RX_DATA 0x01cc 0x0458 0x05f4 2 1 +#define MX6UL_PAD_SD1_DATA2__FLEXCAN2_TX 0x01cc 0x0458 0x0000 3 0 +#define MX6UL_PAD_SD1_DATA2__EIM_ADDR23 0x01cc 0x0458 0x0000 4 0 +#define MX6UL_PAD_SD1_DATA2__GPIO2_IO20 0x01cc 0x0458 0x0000 5 0 +#define MX6UL_PAD_SD1_DATA2__CCM_CLKO1 0x01cc 0x0458 0x0000 6 0 +#define MX6UL_PAD_SD1_DATA2__USB_OTG2_OC 0x01cc 0x0458 0x0000 8 0 +#define MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x01d0 0x045c 0x0000 0 0 +#define MX6UL_PAD_SD1_DATA3__GPT2_CAPTURE2 0x01d0 0x045c 0x059c 1 1 +#define MX6UL_PAD_SD1_DATA3__SAI2_TX_DATA 0x01d0 0x045c 0x0000 2 0 +#define MX6UL_PAD_SD1_DATA3__FLEXCAN2_RX 0x01d0 0x045c 0x0588 3 3 +#define MX6UL_PAD_SD1_DATA3__EIM_ADDR24 0x01d0 0x045c 0x0000 4 0 +#define MX6UL_PAD_SD1_DATA3__GPIO2_IO21 0x01d0 0x045c 0x0000 5 0 +#define MX6UL_PAD_SD1_DATA3__CCM_CLKO2 0x01d0 0x045c 0x0000 6 0 +#define MX6UL_PAD_SD1_DATA3__ANATOP_OTG2_ID 0x01d0 0x045c 0x0000 8 0 +#define MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x01d4 0x0460 0x0000 0 0 +#define MX6UL_PAD_CSI_MCLK__USDHC2_CD_B 0x01d4 0x0460 0x0674 1 0 +#define MX6UL_PAD_CSI_MCLK__RAWNAND_CE2_B 0x01d4 0x0460 0x0000 2 0 +#define MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x01d4 0x0460 0x05a8 3 0 +#define MX6UL_PAD_CSI_MCLK__EIM_CS0_B 0x01d4 0x0460 0x0000 4 0 +#define MX6UL_PAD_CSI_MCLK__GPIO4_IO17 0x01d4 0x0460 0x0000 5 0 +#define MX6UL_PAD_CSI_MCLK__SNVS_HP_VIO_5_CTL 0x01d4 0x0460 0x0000 6 0 +#define MX6UL_PAD_CSI_MCLK__UART6_DCE_TX 0x01d4 0x0460 0x0000 8 0 +#define MX6UL_PAD_CSI_MCLK__UART6_DTE_RX 0x01d4 0x0460 0x064c 8 0 +#define MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x01d8 0x0464 0x0528 0 1 +#define MX6UL_PAD_CSI_PIXCLK__USDHC2_WP 0x01d8 0x0464 0x069c 1 2 +#define MX6UL_PAD_CSI_PIXCLK__RAWNAND_CE3_B 0x01d8 0x0464 0x0000 2 0 +#define MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x01d8 0x0464 0x05a4 3 2 +#define MX6UL_PAD_CSI_PIXCLK__EIM_OE 0x01d8 0x0464 0x0000 4 0 +#define MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18 0x01d8 0x0464 0x0000 5 0 +#define MX6UL_PAD_CSI_PIXCLK__SNVS_HP_VIO_5 0x01d8 0x0464 0x0000 6 0 +#define MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX 0x01d8 0x0464 0x064c 8 3 +#define MX6UL_PAD_CSI_PIXCLK__UART6_DTE_TX 0x01d8 0x0464 0x0000 8 0 +#define MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x01dc 0x0468 0x052c 0 0 +#define MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x01dc 0x0468 0x0670 1 0 +#define MX6UL_PAD_CSI_VSYNC__SIM1_PORT1_CLK 0x01dc 0x0468 0x0000 2 0 +#define MX6UL_PAD_CSI_VSYNC__I2C2_SDA 0x01dc 0x0468 0x05b0 3 0 +#define MX6UL_PAD_CSI_VSYNC__EIM_RW 0x01dc 0x0468 0x0000 4 0 +#define MX6UL_PAD_CSI_VSYNC__GPIO4_IO19 0x01dc 0x0468 0x0000 5 0 +#define MX6UL_PAD_CSI_VSYNC__PWM7_OUT 0x01dc 0x0468 0x0000 6 0 +#define MX6UL_PAD_CSI_VSYNC__UART6_DCE_RTS 0x01dc 0x0468 0x0648 8 0 +#define MX6UL_PAD_CSI_VSYNC__UART6_DTE_CTS 0x01dc 0x0468 0x0000 8 0 +#define MX6UL_PAD_CSI_HSYNC__CSI_HSYNC 0x01e0 0x046c 0x0524 0 0 +#define MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x01e0 0x046c 0x0678 1 0 +#define MX6UL_PAD_CSI_HSYNC__SIM1_PORT1_PD 0x01e0 0x046c 0x0000 2 0 +#define MX6UL_PAD_CSI_HSYNC__I2C2_SCL 0x01e0 0x046c 0x05ac 3 0 +#define MX6UL_PAD_CSI_HSYNC__EIM_LBA_B 0x01e0 0x046c 0x0000 4 0 +#define MX6UL_PAD_CSI_HSYNC__GPIO4_IO20 0x01e0 0x046c 0x0000 5 0 +#define MX6UL_PAD_CSI_HSYNC__PWM8_OUT 0x01e0 0x046c 0x0000 6 0 +#define MX6UL_PAD_CSI_HSYNC__UART6_DCE_CTS 0x01e0 0x046c 0x0000 8 0 +#define MX6UL_PAD_CSI_HSYNC__UART6_DTE_RTS 0x01e0 0x046c 0x0648 8 1 +#define MX6UL_PAD_CSI_DATA00__CSI_DATA02 0x01e4 0x0470 0x04c4 0 0 +#define MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x01e4 0x0470 0x067c 1 0 +#define MX6UL_PAD_CSI_DATA00__SIM1_PORT1_RST_B 0x01e4 0x0470 0x0000 2 0 +#define MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK 0x01e4 0x0470 0x0544 3 0 +#define MX6UL_PAD_CSI_DATA00__EIM_AD00 0x01e4 0x0470 0x0000 4 0 +#define MX6UL_PAD_CSI_DATA00__GPIO4_IO21 0x01e4 0x0470 0x0000 5 0 +#define MX6UL_PAD_CSI_DATA00__SRC_INT_BOOT 0x01e4 0x0470 0x0000 6 0 +#define MX6UL_PAD_CSI_DATA00__UART5_DCE_TX 0x01e4 0x0470 0x0000 8 0 +#define MX6UL_PAD_CSI_DATA00__UART5_DTE_RX 0x01e4 0x0470 0x0644 8 0 +#define MX6UL_PAD_CSI_DATA01__CSI_DATA03 0x01e8 0x0474 0x04c8 0 0 +#define MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x01e8 0x0474 0x0680 1 0 +#define MX6UL_PAD_CSI_DATA01__SIM1_PORT1_SVEN 0x01e8 0x0474 0x0000 2 0 +#define MX6UL_PAD_CSI_DATA01__ECSPI2_SS0 0x01e8 0x0474 0x0000 3 0 +#define MX6UL_PAD_CSI_DATA01__EIM_AD01 0x01e8 0x0474 0x0000 4 0 +#define MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x01e8 0x0474 0x0000 5 0 +#define MX6UL_PAD_CSI_DATA01__SAI1_MCLK 0x01e8 0x0474 0x0000 6 0 +#define MX6UL_PAD_CSI_DATA01__UART5_DCE_RX 0x01e8 0x0474 0x0644 8 1 +#define MX6UL_PAD_CSI_DATA01__UART5_DTE_TX 0x01e8 0x0474 0x0000 8 0 +#define MX6UL_PAD_CSI_DATA02__CSI_DATA04 0x01ec 0x0478 0x04d8 0 1 +#define MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x01ec 0x0478 0x0684 1 2 +#define MX6UL_PAD_CSI_DATA02__SIM1_PORT1_TRXD 0x01ec 0x0478 0x0000 2 0 +#define MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI 0x01ec 0x0478 0x054c 3 1 +#define MX6UL_PAD_CSI_DATA02__EIM_AD02 0x01ec 0x0478 0x0000 4 0 +#define MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x01ec 0x0478 0x0000 5 0 +#define MX6UL_PAD_CSI_DATA02__SAI1_RX_SYNC 0x01ec 0x0478 0x0000 6 0 +#define MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS 0x01ec 0x0478 0x0640 8 5 +#define MX6UL_PAD_CSI_DATA02__UART5_DTE_CTS 0x01ec 0x0478 0x0000 8 0 +#define MX6UL_PAD_CSI_DATA03__CSI_DATA05 0x01f0 0x047c 0x04cc 0 0 +#define MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x01f0 0x047c 0x0688 1 0 +#define MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD 0x01f0 0x047c 0x0000 2 0 +#define MX6UL_PAD_CSI_DATA03__ECSPI2_MISO 0x01f0 0x047c 0x0548 3 0 +#define MX6UL_PAD_CSI_DATA03__EIM_AD03 0x01f0 0x047c 0x0000 4 0 +#define MX6UL_PAD_CSI_DATA03__GPIO4_IO24 0x01f0 0x047c 0x0000 5 0 +#define MX6UL_PAD_CSI_DATA03__SAI1_RX_BCLK 0x01f0 0x047c 0x0000 6 0 +#define MX6UL_PAD_CSI_DATA03__UART5_DCE_CTS 0x01f0 0x047c 0x0000 8 0 +#define MX6UL_PAD_CSI_DATA03__UART5_DTE_RTS 0x01f0 0x047c 0x0640 8 0 +#define MX6UL_PAD_CSI_DATA04__CSI_DATA06 0x01f4 0x0480 0x04dc 0 1 +#define MX6UL_PAD_CSI_DATA04__USDHC2_DATA4 0x01f4 0x0480 0x068c 1 2 +#define MX6UL_PAD_CSI_DATA04__SIM2_PORT1_CLK 0x01f4 0x0480 0x0000 2 0 +#define MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK 0x01f4 0x0480 0x0534 3 1 +#define MX6UL_PAD_CSI_DATA04__EIM_AD04 0x01f4 0x0480 0x0000 4 0 +#define MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0x01f4 0x0480 0x0000 5 0 +#define MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC 0x01f4 0x0480 0x05ec 6 1 +#define MX6UL_PAD_CSI_DATA04__USDHC1_WP 0x01f4 0x0480 0x0000 8 0 +#define MX6UL_PAD_CSI_DATA05__CSI_DATA07 0x01f8 0x0484 0x04e0 0 1 +#define MX6UL_PAD_CSI_DATA05__USDHC2_DATA5 0x01f8 0x0484 0x0690 1 2 +#define MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B 0x01f8 0x0484 0x0000 2 0 +#define MX6UL_PAD_CSI_DATA05__ECSPI1_SS0 0x01f8 0x0484 0x0000 3 0 +#define MX6UL_PAD_CSI_DATA05__EIM_AD05 0x01f8 0x0484 0x0000 4 0 +#define MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x01f8 0x0484 0x0000 5 0 +#define MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK 0x01f8 0x0484 0x05e8 6 1 +#define MX6UL_PAD_CSI_DATA05__USDHC1_CD_B 0x01f8 0x0484 0x0000 8 0 +#define MX6UL_PAD_CSI_DATA06__CSI_DATA08 0x01fc 0x0488 0x04e4 0 1 +#define MX6UL_PAD_CSI_DATA06__USDHC2_DATA6 0x01fc 0x0488 0x0694 1 2 +#define MX6UL_PAD_CSI_DATA06__SIM2_PORT1_SVEN 0x01fc 0x0488 0x0000 2 0 +#define MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI 0x01fc 0x0488 0x053c 3 1 +#define MX6UL_PAD_CSI_DATA06__EIM_AD06 0x01fc 0x0488 0x0000 4 0 +#define MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0x01fc 0x0488 0x0000 5 0 +#define MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA 0x01fc 0x0488 0x0000 6 0 +#define MX6UL_PAD_CSI_DATA06__USDHC1_RESET_B 0x01fc 0x0488 0x0000 8 0 +#define MX6UL_PAD_CSI_DATA07__CSI_DATA09 0x0200 0x048c 0x04e8 0 1 +#define MX6UL_PAD_CSI_DATA07__USDHC2_DATA7 0x0200 0x048c 0x0698 1 2 +#define MX6UL_PAD_CSI_DATA07__SIM2_PORT1_TRXD 0x0200 0x048c 0x0000 2 0 +#define MX6UL_PAD_CSI_DATA07__ECSPI1_MISO 0x0200 0x048c 0x0538 3 1 +#define MX6UL_PAD_CSI_DATA07__EIM_AD07 0x0200 0x048c 0x0000 4 0 +#define MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x0200 0x048c 0x0000 5 0 +#define MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA 0x0200 0x048c 0x0000 6 0 +#define MX6UL_PAD_CSI_DATA07__USDHC1_VSELECT 0x0200 0x048c 0x0000 8 0 + +#endif /* __DTS_IMX6UL_PINFUNC_H */ diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi new file mode 100644 index 000000000000..09edbedfd908 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -0,0 +1,707 @@ +/* + * Copyright 2015 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/clock/imx6ul-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "imx6ul-pinfunc.h" +#include "skeleton.dtsi" + +/ { + aliases { + ethernet0 = &fec1; + ethernet1 = &fec2; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + i2c3 = &i2c4; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &uart6; + serial6 = &uart7; + serial7 = &uart8; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi2 = &ecspi3; + spi3 = &ecspi4; + usbphy0 = &usbphy1; + usbphy1 = &usbphy2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + clock-latency = <61036>; /* two CLK32 periods */ + operating-points = < + /* kHz uV */ + 528000 1250000 + 396000 1150000 + 198000 1150000 + >; + fsl,soc-operating-points = < + /* KHz uV */ + 528000 1250000 + 396000 1150000 + 198000 1150000 + >; + clocks = <&clks IMX6UL_CLK_ARM>, + <&clks IMX6UL_CLK_PLL2_BUS>, + <&clks IMX6UL_CLK_PLL2_PFD2>, + <&clks IMX6UL_CA7_SECONDARY_SEL>, + <&clks IMX6UL_CLK_STEP>, + <&clks IMX6UL_CLK_PLL1_SW>, + <&clks IMX6UL_CLK_PLL1_SYS>, + <&clks IMX6UL_PLL1_BYPASS>, + <&clks IMX6UL_CLK_PLL1>, + <&clks IMX6UL_PLL1_BYPASS_SRC>, + <&clks IMX6UL_CLK_OSC>; + clock-names = "arm", "pll2_bus", "pll2_pfd2_396m", + "secondary_sel", "step", "pll1_sw", + "pll1_sys", "pll1_bypass", "pll1", + "pll1_bypass_src", "osc"; + arm-supply = <®_arm>; + soc-supply = <®_soc>; + }; + }; + + intc: interrupt-controller@00a01000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x00a01000 0x1000>, + <0x00a02000 0x1000>, + <0x00a04000 0x2000>, + <0x00a06000 0x2000>; + }; + + ckil: clock-cli { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "ckil"; + }; + + osc: clock-osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc"; + }; + + ipp_di0: clock-di0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ipp_di0"; + }; + + ipp_di1: clock-di1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ipp_di1"; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gpc>; + ranges; + + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + aips1: aips-bus@02000000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x100000>; + ranges; + + spba-bus@02000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x40000>; + ranges; + + ecspi1: ecspi@02008000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x02008000 0x4000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_ECSPI1>, + <&clks IMX6UL_CLK_ECSPI1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi2: ecspi@0200c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x0200c000 0x4000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_ECSPI2>, + <&clks IMX6UL_CLK_ECSPI2>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi3: ecspi@02010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x02010000 0x4000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_ECSPI3>, + <&clks IMX6UL_CLK_ECSPI3>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi4: ecspi@02014000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x02014000 0x4000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_ECSPI4>, + <&clks IMX6UL_CLK_ECSPI4>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart7: serial@02018000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart"; + reg = <0x02018000 0x4000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_UART7_IPG>, + <&clks IMX6UL_CLK_UART7_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart1: serial@02020000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart"; + reg = <0x02020000 0x4000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_UART1_IPG>, + <&clks IMX6UL_CLK_UART1_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart8: serial@02024000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart"; + reg = <0x02024000 0x4000>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_UART8_IPG>, + <&clks IMX6UL_CLK_UART8_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + }; + + gpt1: gpt@02098000 { + compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt"; + reg = <0x02098000 0x4000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_GPT1_BUS>, + <&clks IMX6UL_CLK_GPT1_SERIAL>; + clock-names = "ipg", "per"; + }; + + gpio1: gpio@0209c000 { + compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; + reg = <0x0209c000 0x4000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@020a0000 { + compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; + reg = <0x020a0000 0x4000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@020a4000 { + compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; + reg = <0x020a4000 0x4000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@020a8000 { + compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; + reg = <0x020a8000 0x4000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@020ac000 { + compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio"; + reg = <0x020ac000 0x4000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + fec2: ethernet@020b4000 { + compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec"; + reg = <0x020b4000 0x4000>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_ENET>, + <&clks IMX6UL_CLK_ENET_AHB>, + <&clks IMX6UL_CLK_ENET_PTP>, + <&clks IMX6UL_CLK_ENET2_REF_125M>, + <&clks IMX6UL_CLK_ENET2_REF_125M>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + fsl,num-tx-queues=<1>; + fsl,num-rx-queues=<1>; + status = "disabled"; + }; + + wdog1: wdog@020bc000 { + compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt"; + reg = <0x020bc000 0x4000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_WDOG1>; + }; + + wdog2: wdog@020c0000 { + compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt"; + reg = <0x020c0000 0x4000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_WDOG2>; + status = "disabled"; + }; + + clks: ccm@020c4000 { + compatible = "fsl,imx6ul-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>; + clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; + }; + + anatop: anatop@020c8000 { + compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop", + "syscon", "simple-bus"; + reg = <0x020c8000 0x1000>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + + reg_3p0: regulator-3p0@120 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd3p0"; + regulator-min-microvolt = <2625000>; + regulator-max-microvolt = <3400000>; + anatop-reg-offset = <0x120>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0>; + anatop-min-voltage = <2625000>; + anatop-max-voltage = <3400000>; + anatop-enable-bit = <0>; + }; + + reg_arm: regulator-vddcore@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "cpu"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <0>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <24>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + + reg_soc: regulator-vddsoc@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddsoc"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <18>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <28>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + }; + + usbphy1: usbphy@020c9000 { + compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy"; + reg = <0x020c9000 0x1000>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_USBPHY1>; + phy-3p0-supply = <®_3p0>; + fsl,anatop = <&anatop>; + }; + + usbphy2: usbphy@020ca000 { + compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy"; + reg = <0x020ca000 0x1000>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_USBPHY2>; + phy-3p0-supply = <®_3p0>; + fsl,anatop = <&anatop>; + }; + + snvs: snvs@020cc000 { + compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; + reg = <0x020cc000 0x4000>; + + snvs_rtc: snvs-rtc-lp { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + regmap = <&snvs>; + offset = <0x34>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + }; + + snvs_pwrkey: snvs-powerkey { + compatible = "fsl,sec-v4.0-pwrkey"; + regmap = <&snvs>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + linux,keycode = <KEY_POWER>; + wakeup-source; + }; + }; + + epit1: epit@020d0000 { + reg = <0x020d0000 0x4000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + }; + + epit2: epit@020d4000 { + reg = <0x020d4000 0x4000>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + }; + + src: src@020d8000 { + compatible = "fsl,imx6ul-src", "fsl,imx51-src"; + reg = <0x020d8000 0x4000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + #reset-cells = <1>; + }; + + gpc: gpc@020dc000 { + compatible = "fsl,imx6ul-gpc", "fsl,imx6q-gpc"; + reg = <0x020dc000 0x4000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&intc>; + }; + + iomuxc: iomuxc@020e0000 { + compatible = "fsl,imx6ul-iomuxc"; + reg = <0x020e0000 0x4000>; + }; + + gpr: iomuxc-gpr@020e4000 { + compatible = "fsl,imx6ul-iomuxc-gpr", "syscon"; + reg = <0x020e4000 0x4000>; + }; + + gpt2: gpt@020e8000 { + compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt"; + reg = <0x020e8000 0x4000>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_DUMMY>; + clock-names = "ipg", "per"; + }; + + pwm5: pwm@020f0000 { + compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; + reg = <0x020f0000 0x4000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_DUMMY>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm6: pwm@020f4000 { + compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; + reg = <0x020f4000 0x4000>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_DUMMY>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm7: pwm@020f8000 { + compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; + reg = <0x020f8000 0x4000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_DUMMY>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm8: pwm@020fc000 { + compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; + reg = <0x020fc000 0x4000>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_DUMMY>, + <&clks IMX6UL_CLK_DUMMY>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + }; + + aips2: aips-bus@02100000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02100000 0x100000>; + ranges; + + usbotg1: usb@02184000 { + compatible = "fsl,imx6ul-usb", "fsl,imx27-usb"; + reg = <0x02184000 0x200>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_USBOH3>; + fsl,usbphy = <&usbphy1>; + fsl,usbmisc = <&usbmisc 0>; + fsl,anatop = <&anatop>; + status = "disabled"; + }; + + usbotg2: usb@02184200 { + compatible = "fsl,imx6ul-usb", "fsl,imx27-usb"; + reg = <0x02184200 0x200>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_USBOH3>; + fsl,usbphy = <&usbphy2>; + fsl,usbmisc = <&usbmisc 1>; + status = "disabled"; + }; + + usbmisc: usbmisc@02184800 { + #index-cells = <1>; + compatible = "fsl,imx6ul-usbmisc", "fsl,imx6q-usbmisc"; + reg = <0x02184800 0x200>; + }; + + fec1: ethernet@02188000 { + compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec"; + reg = <0x02188000 0x4000>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_ENET>, + <&clks IMX6UL_CLK_ENET_AHB>, + <&clks IMX6UL_CLK_ENET_PTP>, + <&clks IMX6UL_CLK_ENET_REF>, + <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + fsl,num-tx-queues=<1>; + fsl,num-rx-queues=<1>; + status = "disabled"; + }; + + usdhc1: usdhc@02190000 { + compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x02190000 0x4000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_USDHC1>, + <&clks IMX6UL_CLK_USDHC1>, + <&clks IMX6UL_CLK_USDHC1>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + usdhc2: usdhc@02194000 { + compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x02194000 0x4000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_USDHC2>, + <&clks IMX6UL_CLK_USDHC2>, + <&clks IMX6UL_CLK_USDHC2>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + i2c1: i2c@021a0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c"; + reg = <0x021a0000 0x4000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_I2C1>; + status = "disabled"; + }; + + i2c2: i2c@021a4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c"; + reg = <0x021a4000 0x4000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_I2C2>; + status = "disabled"; + }; + + i2c3: i2c@021a8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c"; + reg = <0x021a8000 0x4000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_I2C3>; + status = "disabled"; + }; + + qspi: qspi@021e0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi"; + reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_QSPI>, + <&clks IMX6UL_CLK_QSPI>; + clock-names = "qspi_en", "qspi"; + status = "disabled"; + }; + + uart2: serial@021e8000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart"; + reg = <0x021e8000 0x4000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_UART2_IPG>, + <&clks IMX6UL_CLK_UART2_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart3: serial@021ec000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart"; + reg = <0x021ec000 0x4000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_UART3_IPG>, + <&clks IMX6UL_CLK_UART3_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart4: serial@021f0000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart"; + reg = <0x021f0000 0x4000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_UART4_IPG>, + <&clks IMX6UL_CLK_UART4_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart5: serial@021f4000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart"; + reg = <0x021f4000 0x4000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_UART5_IPG>, + <&clks IMX6UL_CLK_UART5_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + i2c4: i2c@021f8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c"; + reg = <0x021f8000 0x4000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_I2C4>; + status = "disabled"; + }; + + uart6: serial@021fc000 { + compatible = "fsl,imx6ul-uart", + "fsl,imx6q-uart"; + reg = <0x021fc000 0x4000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_UART6_IPG>, + <&clks IMX6UL_CLK_UART6_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index c42cf8db0451..b738ce0f9d9b 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -121,6 +121,209 @@ clock-output-names = "osc"; }; + etr@30086000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x30086000 0x1000>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + port { + etr_in_port: endpoint { + slave-mode; + remote-endpoint = <&replicator_out_port1>; + }; + }; + }; + + tpiu@30087000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0x30087000 0x1000>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + port { + tpiu_in_port: endpoint { + slave-mode; + remote-endpoint = <&replicator_out_port1>; + }; + }; + }; + + replicator { + /* + * non-configurable replicators don't show up on the + * AMBA bus. As such no need to add "arm,primecell" + */ + compatible = "arm,coresight-replicator"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* replicator output ports */ + port@0 { + reg = <0>; + replicator_out_port0: endpoint { + remote-endpoint = <&tpiu_in_port>; + }; + }; + + port@1 { + reg = <1>; + replicator_out_port1: endpoint { + remote-endpoint = <&etr_in_port>; + }; + }; + + /* replicator input port */ + port@2 { + reg = <0>; + replicator_in_port0: endpoint { + slave-mode; + remote-endpoint = <&etf_out_port>; + }; + }; + }; + }; + + etf@30084000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x30084000 0x1000>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + etf_in_port: endpoint { + slave-mode; + remote-endpoint = <&hugo_funnel_out_port0>; + }; + }; + + port@1 { + reg = <0>; + etf_out_port: endpoint { + remote-endpoint = <&replicator_in_port0>; + }; + }; + }; + }; + + funnel@30083000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0x30083000 0x1000>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* funnel input ports */ + port@0 { + reg = <0>; + hugo_funnel_in_port0: endpoint { + slave-mode; + remote-endpoint = <&ca_funnel_out_port0>; + }; + }; + + port@1 { + reg = <1>; + hugo_funnel_in_port1: endpoint { + slave-mode; /* M4 input */ + }; + }; + + port@2 { + reg = <0>; + hugo_funnel_out_port0: endpoint { + remote-endpoint = <&etf_in_port>; + }; + }; + + /* the other input ports are not connect to anything */ + }; + }; + + funnel@30041000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0x30041000 0x1000>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* funnel input ports */ + port@0 { + reg = <0>; + ca_funnel_in_port0: endpoint { + slave-mode; + remote-endpoint = <&etm0_out_port>; + }; + }; + + port@1 { + reg = <1>; + ca_funnel_in_port1: endpoint { + slave-mode; + remote-endpoint = <&etm1_out_port>; + }; + }; + + /* funnel output port */ + port@2 { + reg = <0>; + ca_funnel_out_port0: endpoint { + remote-endpoint = <&hugo_funnel_in_port0>; + }; + }; + + /* the other input ports are not connect to anything */ + }; + }; + + etm@3007c000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x3007c000 0x1000>; + cpu = <&cpu0>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + port { + etm0_out_port: endpoint { + remote-endpoint = <&ca_funnel_in_port0>; + }; + }; + }; + + etm@3007d000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x3007d000 0x1000>; + + /* + * System will hang if added nosmp in kernel command line + * without arm,primecell-periphid because amba bus try to + * read id and core1 power off at this time. + */ + arm,primecell-periphid = <0xbb956>; + cpu = <&cpu1>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + port { + etm1_out_port: endpoint { + remote-endpoint = <&ca_funnel_in_port1>; + }; + }; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -212,6 +415,37 @@ #interrupt-cells = <2>; }; + wdog1: wdog@30280000 { + compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; + reg = <0x30280000 0x10000>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_WDOG1_ROOT_CLK>; + }; + + wdog2: wdog@30290000 { + compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; + reg = <0x30290000 0x10000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_WDOG2_ROOT_CLK>; + status = "disabled"; + }; + + wdog3: wdog@302a0000 { + compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; + reg = <0x302a0000 0x10000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_WDOG3_ROOT_CLK>; + status = "disabled"; + }; + + wdog4: wdog@302b0000 { + compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; + reg = <0x302b0000 0x10000>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_WDOG4_ROOT_CLK>; + status = "disabled"; + }; + gpt1: gpt@302d0000 { compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; reg = <0x302d0000 0x10000>; @@ -291,17 +525,31 @@ }; snvs: snvs@30370000 { - compatible = "fsl,sec-v4.0-mon", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x30370000 0x10000>; + compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; + reg = <0x30370000 0x10000>; - snvs-rtc-lp@34 { + snvs_rtc: snvs-rtc-lp { compatible = "fsl,sec-v4.0-mon-rtc-lp"; - reg = <0x34 0x58>; + regmap = <&snvs>; + offset = <0x34>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; }; + + snvs_poweroff: snvs-poweroff { + compatible = "syscon-poweroff"; + regmap = <&snvs>; + offset = <0x38>; + mask = <0x60>; + }; + + snvs_pwrkey: snvs-powerkey { + compatible = "fsl,sec-v4.0-pwrkey"; + regmap = <&snvs>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + linux,keycode = <KEY_POWER>; + wakeup-source; + }; }; clks: ccm@30380000 { diff --git a/arch/arm/boot/dts/kirkwood-lswvl.dts b/arch/arm/boot/dts/kirkwood-lswvl.dts new file mode 100644 index 000000000000..09eed3cea0af --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-lswvl.dts @@ -0,0 +1,301 @@ +/* + * Device Tree file for Buffalo Linkstation LS-WVL/VL + * + * Copyright (C) 2015, rogershimizu@gmail.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6282.dtsi" + +/ { + model = "Buffalo Linkstation LS-WVL/VL"; + compatible = "buffalo,lswvl", "buffalo,lsvl", "marvell,kirkwood-88f6282", "marvell,kirkwood"; + + memory { /* 256 MB */ + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; + }; + + mbus { + pcie-controller { + status = "okay"; + pcie@1,0 { + status = "okay"; + }; + }; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pmx_power_hdd0: pmx-power-hdd0 { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; + pmx_power_hdd1: pmx-power-hdd1 { + marvell,pins = "mpp9"; + marvell,function = "gpio"; + }; + pmx_usb_vbus: pmx-usb-vbus { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + pmx_fan_high: pmx-fan-high { + marvell,pins = "mpp16"; + marvell,function = "gpio"; + }; + pmx_fan_low: pmx-fan-low { + marvell,pins = "mpp17"; + marvell,function = "gpio"; + }; + pmx_led_hdderr0: pmx-led-hdderr0 { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; + pmx_led_hdderr1: pmx-led-hdderr1 { + marvell,pins = "mpp35"; + marvell,function = "gpio"; + }; + pmx_led_alarm: pmx-led-alarm { + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + pmx_led_function_red: pmx-led-function-red { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + pmx_led_info: pmx-led-info { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + pmx_led_function_blue: pmx-led-function-blue { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + pmx_led_power: pmx-led-power { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + pmx_fan_lock: pmx-fan-lock { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + pmx_button_function: pmx-button-function { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + pmx_power_switch: pmx-power-switch { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + pmx_power_auto_switch: pmx-power-auto-switch { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + }; + + serial@12000 { + status = "okay"; + }; + + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + + spi@10600 { + status = "okay"; + + m25p40@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p40", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + mode = <0>; + + partition@0 { + reg = <0x0 0x60000>; + label = "uboot"; + read-only; + }; + + partition@60000 { + reg = <0x60000 0x10000>; + label = "dtb"; + read-only; + }; + + partition@70000 { + reg = <0x70000 0x10000>; + label = "uboot_env"; + }; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_button_function &pmx_power_switch + &pmx_power_auto_switch>; + pinctrl-names = "default"; + + button@1 { + label = "Function Button"; + linux,code = <KEY_OPTION>; + gpios = <&gpio0 45 GPIO_ACTIVE_LOW>; + }; + + button@2 { + label = "Power-on Switch"; + linux,code = <KEY_RESERVED>; + linux,input-type = <5>; + gpios = <&gpio0 46 GPIO_ACTIVE_LOW>; + }; + + button@3 { + label = "Power-auto Switch"; + linux,code = <KEY_ESC>; + linux,input-type = <5>; + gpios = <&gpio0 47 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm + &pmx_led_info &pmx_led_power + &pmx_led_function_blue + &pmx_led_hdderr0 + &pmx_led_hdderr1>; + pinctrl-names = "default"; + + led@1 { + label = "lswvl:red:alarm"; + gpios = <&gpio0 36 GPIO_ACTIVE_LOW>; + }; + + led@2 { + label = "lswvl:red:func"; + gpios = <&gpio0 37 GPIO_ACTIVE_LOW>; + }; + + led@3 { + label = "lswvl:amber:info"; + gpios = <&gpio0 38 GPIO_ACTIVE_LOW>; + }; + + led@4 { + label = "lswvl:blue:func"; + gpios = <&gpio0 39 GPIO_ACTIVE_LOW>; + }; + + led@5 { + label = "lswvl:blue:power"; + gpios = <&gpio0 40 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + + led@6 { + label = "lswvl:red:hdderr0"; + gpios = <&gpio0 34 GPIO_ACTIVE_LOW>; + }; + + led@7 { + label = "lswvl:red:hdderr1"; + gpios = <&gpio0 35 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_fan { + compatible = "gpio-fan"; + pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>; + pinctrl-names = "default"; + + gpios = <&gpio0 17 GPIO_ACTIVE_LOW + &gpio0 16 GPIO_ACTIVE_LOW>; + + gpio-fan,speed-map = <0 3 + 1500 2 + 3250 1 + 5000 0>; + + alarm-gpios = <&gpio0 43 GPIO_ACTIVE_HIGH>; + }; + + restart_poweroff { + compatible = "restart-poweroff"; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>; + pinctrl-names = "default"; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + }; + hdd_power0: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "HDD0 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>; + }; + hdd_power1: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "HDD1 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + }; +}; + +ð0 { + status = "okay"; + + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-lswxl.dts b/arch/arm/boot/dts/kirkwood-lswxl.dts new file mode 100644 index 000000000000..f5db16a08597 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-lswxl.dts @@ -0,0 +1,301 @@ +/* + * Device Tree file for Buffalo Linkstation LS-WXL/WSXL + * + * Copyright (C) 2015, rogershimizu@gmail.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" + +/ { + model = "Buffalo Linkstation LS-WXL/WSXL"; + compatible = "buffalo,lswxl", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { /* 128 MB */ + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; + }; + + mbus { + pcie-controller { + status = "okay"; + pcie@1,0 { + status = "okay"; + }; + }; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pmx_power_hdd0: pmx-power-hdd0 { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + pmx_power_hdd1: pmx-power-hdd1 { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + pmx_usb_vbus: pmx-usb-vbus { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + pmx_fan_high: pmx-fan-high { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + pmx_fan_low: pmx-fan-low { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + pmx_led_hdderr0: pmx-led-hdderr0 { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; + pmx_led_hdderr1: pmx-led-hdderr1 { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + pmx_led_alarm: pmx-led-alarm { + marvell,pins = "mpp49"; + marvell,function = "gpio"; + }; + pmx_led_function_red: pmx-led-function-red { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; + pmx_led_function_blue: pmx-led-function-blue { + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + pmx_led_info: pmx-led-info { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + pmx_led_power: pmx-led-power { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + pmx_fan_lock: pmx-fan-lock { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + pmx_button_function: pmx-button-function { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + pmx_power_switch: pmx-power-switch { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + pmx_power_auto_switch: pmx-power-auto-switch { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + }; + + serial@12000 { + status = "okay"; + }; + + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + + spi@10600 { + status = "okay"; + + m25p40@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p40", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + mode = <0>; + + partition@0 { + reg = <0x0 0x60000>; + label = "uboot"; + read-only; + }; + + partition@60000 { + reg = <0x60000 0x10000>; + label = "dtb"; + read-only; + }; + + partition@70000 { + reg = <0x70000 0x10000>; + label = "uboot_env"; + }; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_button_function &pmx_power_switch + &pmx_power_auto_switch>; + pinctrl-names = "default"; + + button@1 { + label = "Function Button"; + linux,code = <KEY_OPTION>; + gpios = <&gpio1 41 GPIO_ACTIVE_LOW>; + }; + + button@2 { + label = "Power-on Switch"; + linux,code = <KEY_RESERVED>; + linux,input-type = <5>; + gpios = <&gpio1 42 GPIO_ACTIVE_LOW>; + }; + + button@3 { + label = "Power-auto Switch"; + linux,code = <KEY_ESC>; + linux,input-type = <5>; + gpios = <&gpio1 43 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm + &pmx_led_info &pmx_led_power + &pmx_led_function_blue + &pmx_led_hdderr0 + &pmx_led_hdderr1>; + pinctrl-names = "default"; + + led@1 { + label = "lswxl:blue:func"; + gpios = <&gpio1 36 GPIO_ACTIVE_LOW>; + }; + + led@2 { + label = "lswxl:red:alarm"; + gpios = <&gpio1 49 GPIO_ACTIVE_LOW>; + }; + + led@3 { + label = "lswxl:amber:info"; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + }; + + led@4 { + label = "lswxl:blue:power"; + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + }; + + led@5 { + label = "lswxl:red:func"; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + + led@6 { + label = "lswxl:red:hdderr0"; + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + }; + + led@7 { + label = "lswxl:red:hdderr1"; + gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_fan { + compatible = "gpio-fan"; + pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>; + pinctrl-names = "default"; + + gpios = <&gpio0 47 GPIO_ACTIVE_LOW + &gpio0 48 GPIO_ACTIVE_LOW>; + + gpio-fan,speed-map = <0 3 + 1500 2 + 3250 1 + 5000 0>; + + alarm-gpios = <&gpio1 49 GPIO_ACTIVE_HIGH>; + }; + + restart_poweroff { + compatible = "restart-poweroff"; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>; + pinctrl-names = "default"; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 37 GPIO_ACTIVE_HIGH>; + }; + hdd_power0: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "HDD0 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>; + }; + hdd_power1: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "HDD1 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy1: ethernet-phy@8 { + device_type = "ethernet-phy"; + reg = <8>; + }; +}; + +ð1 { + status = "okay"; + + ethernet1-port@0 { + phy-handle = <ðphy1>; + }; +}; diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi index 204da5b52ef9..2c569a6ddc9a 100644 --- a/arch/arm/boot/dts/lpc18xx.dtsi +++ b/arch/arm/boot/dts/lpc18xx.dtsi @@ -13,6 +13,12 @@ #include "armv7-m.dtsi" +#include "dt-bindings/clock/lpc18xx-cgu.h" +#include "dt-bindings/clock/lpc18xx-ccu.h" + +#define LPC_PIN(port, pin) (0x##port * 32 + pin) +#define LPC_GPIO(port, pin) (port * 32 + pin) + / { cpus { #address-cells = <1>; @@ -22,6 +28,7 @@ compatible = "arm,cortex-m3"; device_type = "cpu"; reg = <0x0>; + clocks = <&ccu1 CLK_CPU_CORE>; }; }; @@ -32,32 +39,173 @@ clock-frequency = <12000000>; }; - /* Temporary hardcode PLL1 until clk drivers are merged */ - pll1: pll1 { - compatible = "fixed-factor-clock"; - clocks = <&xtal>; + xtal32: xtal32 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + enet_rx_clk: enet_rx_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "enet_rx_clk"; + }; + + enet_tx_clk: enet_tx_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "enet_tx_clk"; + }; + + gp_clkin: gp_clkin { + compatible = "fixed-clock"; #clock-cells = <0>; - clock-div = <1>; - clock-mult = <12>; + clock-frequency = <0>; + clock-output-names = "gp_clkin"; }; }; soc { + mmcsd: mmcsd@40004000 { + compatible = "snps,dw-mshc"; + reg = <0x40004000 0x1000>; + interrupts = <6>; + num-slots = <1>; + clocks = <&ccu2 CLK_SDIO>, <&ccu1 CLK_CPU_SDIO>; + clock-names = "ciu", "biu"; + status = "disabled"; + }; + + usb0: ehci@40006100 { + compatible = "nxp,lpc1850-ehci", "generic-ehci"; + reg = <0x40006100 0x100>; + interrupts = <8>; + clocks = <&ccu1 CLK_CPU_USB0>; + phys = <&usb0_otg_phy>; + phy-names = "usb"; + has-transaction-translator; + status = "disabled"; + }; + + usb1: ehci@40007100 { + compatible = "nxp,lpc1850-ehci", "generic-ehci"; + reg = <0x40007100 0x100>; + interrupts = <9>; + clocks = <&ccu1 CLK_CPU_USB1>; + status = "disabled"; + }; + + emc: memory-controller@40005000 { + compatible = "arm,pl172", "arm,primecell"; + reg = <0x40005000 0x1000>; + clocks = <&ccu1 CLK_CPU_EMCDIV>, <&ccu1 CLK_CPU_EMC>; + clock-names = "mpmcclk", "apb_pclk"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x1c000000 0x1000000 + 1 0 0x1d000000 0x1000000 + 2 0 0x1e000000 0x1000000 + 3 0 0x1f000000 0x1000000>; + status = "disabled"; + }; + + lcdc: lcd-controller@40008000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x40008000 0x1000>; + interrupts = <7>; + interrupt-names = "combined"; + clocks = <&cgu BASE_LCD_CLK>, <&ccu1 CLK_CPU_LCD>; + clock-names = "clcdclk", "apb_pclk"; + status = "disabled"; + }; + + mac: ethernet@40010000 { + compatible = "nxp,lpc1850-dwmac", "snps,dwmac-3.611", "snps,dwmac"; + reg = <0x40010000 0x2000>; + interrupts = <5>; + interrupt-names = "macirq"; + clocks = <&ccu1 CLK_CPU_ETHERNET>; + clock-names = "stmmaceth"; + status = "disabled"; + }; + + creg: syscon@40043000 { + compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd"; + reg = <0x40043000 0x1000>; + clocks = <&ccu1 CLK_CPU_CREG>; + + usb0_otg_phy: phy@004 { + compatible = "nxp,lpc1850-usb-otg-phy"; + clocks = <&ccu1 CLK_USB0>; + #phy-cells = <0>; + }; + }; + + cgu: clock-controller@40050000 { + compatible = "nxp,lpc1850-cgu"; + reg = <0x40050000 0x1000>; + #clock-cells = <1>; + clocks = <&xtal>, <&xtal32>, <&enet_rx_clk>, <&enet_tx_clk>, <&gp_clkin>; + }; + + ccu1: clock-controller@40051000 { + compatible = "nxp,lpc1850-ccu"; + reg = <0x40051000 0x1000>; + #clock-cells = <1>; + clocks = <&cgu BASE_APB3_CLK>, <&cgu BASE_APB1_CLK>, + <&cgu BASE_SPIFI_CLK>, <&cgu BASE_CPU_CLK>, + <&cgu BASE_PERIPH_CLK>, <&cgu BASE_USB0_CLK>, + <&cgu BASE_USB1_CLK>, <&cgu BASE_SPI_CLK>; + clock-names = "base_apb3_clk", "base_apb1_clk", + "base_spifi_clk", "base_cpu_clk", + "base_periph_clk", "base_usb0_clk", + "base_usb1_clk", "base_spi_clk"; + }; + + ccu2: clock-controller@40052000 { + compatible = "nxp,lpc1850-ccu"; + reg = <0x40052000 0x1000>; + #clock-cells = <1>; + clocks = <&cgu BASE_AUDIO_CLK>, <&cgu BASE_UART3_CLK>, + <&cgu BASE_UART2_CLK>, <&cgu BASE_UART1_CLK>, + <&cgu BASE_UART0_CLK>, <&cgu BASE_SSP1_CLK>, + <&cgu BASE_SSP0_CLK>, <&cgu BASE_SDIO_CLK>; + clock-names = "base_audio_clk", "base_uart3_clk", + "base_uart2_clk", "base_uart1_clk", + "base_uart0_clk", "base_ssp1_clk", + "base_ssp0_clk", "base_sdio_clk"; + }; + uart0: serial@40081000 { - compatible = "ns16550a"; + compatible = "nxp,lpc1850-uart", "ns16550a"; reg = <0x40081000 0x1000>; reg-shift = <2>; interrupts = <24>; - clocks = <&pll1>; + clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>; + clock-names = "uartclk", "reg"; status = "disabled"; }; uart1: serial@40082000 { - compatible = "ns16550a"; + compatible = "nxp,lpc1850-uart", "ns16550a"; reg = <0x40082000 0x1000>; reg-shift = <2>; interrupts = <25>; - clocks = <&pll1>; + clocks = <&ccu2 CLK_APB0_UART1>, <&ccu1 CLK_CPU_UART1>; + clock-names = "uartclk", "reg"; + status = "disabled"; + }; + + ssp0: spi@40083000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x40083000 0x1000>; + interrupts = <22>; + clocks = <&ccu2 CLK_APB0_SSP0>, <&ccu1 CLK_CPU_SSP0>; + clock-names = "sspclk", "apb_pclk"; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; @@ -65,7 +213,7 @@ compatible = "nxp,lpc3220-timer"; reg = <0x40084000 0x1000>; interrupts = <12>; - clocks = <&pll1>; + clocks = <&ccu1 CLK_CPU_TIMER0>; clock-names = "timerclk"; }; @@ -73,25 +221,41 @@ compatible = "nxp,lpc3220-timer"; reg = <0x40085000 0x1000>; interrupts = <13>; - clocks = <&pll1>; + clocks = <&ccu1 CLK_CPU_TIMER1>; clock-names = "timerclk"; }; + pinctrl: pinctrl@40086000 { + compatible = "nxp,lpc1850-scu"; + reg = <0x40086000 0x1000>; + clocks = <&ccu1 CLK_CPU_SCU>; + }; + + can1: can@400a4000 { + compatible = "bosch,c_can"; + reg = <0x400a4000 0x1000>; + interrupts = <43>; + clocks = <&ccu1 CLK_APB1_CAN1>; + status = "disabled"; + }; + uart2: serial@400c1000 { - compatible = "ns16550a"; + compatible = "nxp,lpc1850-uart", "ns16550a"; reg = <0x400c1000 0x1000>; reg-shift = <2>; interrupts = <26>; - clocks = <&pll1>; + clocks = <&ccu2 CLK_APB2_UART2>, <&ccu1 CLK_CPU_UART2>; + clock-names = "uartclk", "reg"; status = "disabled"; }; uart3: serial@400c2000 { - compatible = "ns16550a"; + compatible = "nxp,lpc1850-uart", "ns16550a"; reg = <0x400c2000 0x1000>; reg-shift = <2>; interrupts = <27>; - clocks = <&pll1>; + clocks = <&ccu2 CLK_APB2_UART3>, <&ccu1 CLK_CPU_UART3>; + clock-names = "uartclk", "reg"; status = "disabled"; }; @@ -99,7 +263,7 @@ compatible = "nxp,lpc3220-timer"; reg = <0x400c3000 0x1000>; interrupts = <14>; - clocks = <&pll1>; + clocks = <&ccu1 CLK_CPU_TIMER2>; clock-names = "timerclk"; }; @@ -107,8 +271,75 @@ compatible = "nxp,lpc3220-timer"; reg = <0x400c4000 0x1000>; interrupts = <15>; - clocks = <&pll1>; + clocks = <&ccu1 CLK_CPU_TIMER3>; clock-names = "timerclk"; }; + + ssp1: spi@400c5000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x400c5000 0x1000>; + interrupts = <23>; + clocks = <&ccu2 CLK_APB2_SSP1>, <&ccu1 CLK_CPU_SSP1>; + clock-names = "sspclk", "apb_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + can0: can@400e2000 { + compatible = "bosch,c_can"; + reg = <0x400e2000 0x1000>; + interrupts = <51>; + clocks = <&ccu1 CLK_APB3_CAN0>; + status = "disabled"; + }; + + gpio: gpio@400f4000 { + compatible = "nxp,lpc1850-gpio"; + reg = <0x400f4000 0x4000>; + clocks = <&ccu1 CLK_CPU_GPIO>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl LPC_GPIO(0,0) LPC_PIN(0,0) 2>, + <&pinctrl LPC_GPIO(0,4) LPC_PIN(1,0) 1>, + <&pinctrl LPC_GPIO(0,8) LPC_PIN(1,1) 4>, + <&pinctrl LPC_GPIO(1,8) LPC_PIN(1,5) 2>, + <&pinctrl LPC_GPIO(1,0) LPC_PIN(1,7) 8>, + <&pinctrl LPC_GPIO(0,2) LPC_PIN(1,15) 2>, + <&pinctrl LPC_GPIO(0,12) LPC_PIN(1,17) 2>, + <&pinctrl LPC_GPIO(0,15) LPC_PIN(1,20) 1>, + <&pinctrl LPC_GPIO(5,0) LPC_PIN(2,0) 7>, + <&pinctrl LPC_GPIO(0,7) LPC_PIN(2,7) 1>, + <&pinctrl LPC_GPIO(5,7) LPC_PIN(2,8) 1>, + <&pinctrl LPC_GPIO(1,10) LPC_PIN(2,9) 1>, + <&pinctrl LPC_GPIO(0,14) LPC_PIN(2,10) 1>, + <&pinctrl LPC_GPIO(1,11) LPC_PIN(2,11) 3>, + <&pinctrl LPC_GPIO(5,8) LPC_PIN(3,1) 2>, + <&pinctrl LPC_GPIO(1,14) LPC_PIN(3,4) 2>, + <&pinctrl LPC_GPIO(0,6) LPC_PIN(3,6) 1>, + <&pinctrl LPC_GPIO(5,10) LPC_PIN(3,7) 2>, + <&pinctrl LPC_GPIO(2,0) LPC_PIN(4,0) 7>, + <&pinctrl LPC_GPIO(5,12) LPC_PIN(4,8) 3>, + <&pinctrl LPC_GPIO(2,9) LPC_PIN(5,0) 7>, + <&pinctrl LPC_GPIO(2,7) LPC_PIN(5,7) 1>, + <&pinctrl LPC_GPIO(3,0) LPC_PIN(6,1) 5>, + <&pinctrl LPC_GPIO(0,5) LPC_PIN(6,6) 1>, + <&pinctrl LPC_GPIO(5,15) LPC_PIN(6,7) 2>, + <&pinctrl LPC_GPIO(3,5) LPC_PIN(6,9) 3>, + <&pinctrl LPC_GPIO(2,8) LPC_PIN(6,12) 1>, + <&pinctrl LPC_GPIO(3,8) LPC_PIN(7,0) 8>, + <&pinctrl LPC_GPIO(4,0) LPC_PIN(8,0) 8>, + <&pinctrl LPC_GPIO(4,12) LPC_PIN(9,0) 4>, + <&pinctrl LPC_GPIO(5,17) LPC_PIN(9,4) 2>, + <&pinctrl LPC_GPIO(4,11) LPC_PIN(9,6) 1>, + <&pinctrl LPC_GPIO(4,8) LPC_PIN(a,1) 3>, + <&pinctrl LPC_GPIO(5,19) LPC_PIN(a,4) 1>, + <&pinctrl LPC_GPIO(5,20) LPC_PIN(b,0) 7>, + <&pinctrl LPC_GPIO(6,0) LPC_PIN(c,1) 14>, + <&pinctrl LPC_GPIO(6,14) LPC_PIN(d,0) 17>, + <&pinctrl LPC_GPIO(7,0) LPC_PIN(e,0) 16>, + <&pinctrl LPC_GPIO(7,16) LPC_PIN(f,1) 3>, + <&pinctrl LPC_GPIO(7,19) LPC_PIN(f,5) 7>; + }; }; }; diff --git a/arch/arm/boot/dts/lpc4337-ciaa.dts b/arch/arm/boot/dts/lpc4337-ciaa.dts new file mode 100644 index 000000000000..5f500c1ad89c --- /dev/null +++ b/arch/arm/boot/dts/lpc4337-ciaa.dts @@ -0,0 +1,187 @@ +/* + * CIAA NXP LPC4337 (http://www.proyecto-ciaa.com.ar) + * + * Copyright (C) 2015 VanguardiaSur - www.vanguardiasur.com.ar + * + * This code is released using a dual license strategy: BSD/GPL + * You can choose the licence that better fits your requirements. + * + * Released under the terms of 3-clause BSD License + * Released under the terms of GNU General Public License Version 2.0 + */ +/dts-v1/; + +#include "lpc18xx.dtsi" +#include "lpc4357.dtsi" + +#include "dt-bindings/gpio/gpio.h" + +/ { + model = "CIAA NXP LPC4337"; + compatible = "ciaa,lpc4337", "nxp,lpc4337", "nxp,lpc4350"; + + aliases { + serial0 = &uart2; + serial1 = &uart3; + }; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = &uart2; + }; + + memory { + device_type = "memory"; + reg = <0x28000000 0x0800000>; /* 8 MB */ + }; +}; + +&pinctrl { + enet_rmii_pins: enet-rmii-pins { + enet_rmii_rxd_cfg { + pins = "p1_15", "p0_0"; + function = "enet"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + enet_rmii_txd_cfg { + pins = "p1_18", "p1_20"; + function = "enet"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + enet_rmii_rx_dv_cfg { + pins = "p1_16"; + function = "enet"; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + enet_rmii_tx_en_cfg { + pins = "p0_1"; + function = "enet"; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + enet_ref_clk_cfg { + pins = "p1_19"; + function = "enet"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + enet_mdio_cfg { + pins = "p1_17"; + function = "enet"; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + enet_mdc_cfg { + pins = "p7_7"; + function = "enet"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + }; + + ssp_pins: ssp-pins { + ssp1_cs { + pins = "p6_7"; + function = "gpio"; + bias-pull-up; + bias-disable; + }; + + ssp1_miso_mosi { + pins = "p1_3", "p1_4"; + function = "ssp1"; + slew-rate = <1>; + bias-pull-down; + input-enable; + input-schmitt-disable; + }; + + ssp1_sck { + pins = "pf_4"; + function = "ssp1"; + slew-rate = <1>; + bias-disable; + }; + }; + + uart2_pins: uart2-pins { + uart2_rx_cfg { + pins = "p7_2"; + function = "uart2"; + bias-disable; + input-enable; + }; + + uart2_tx_cfg { + pins = "p7_1"; + function = "uart2"; + bias-disable; + }; + }; + + uart3_pins: uart3-pins { + uart3_rx_cfg { + pins = "p2_4"; + function = "uart3"; + bias-disable; + input-enable; + }; + + uart3_tx_cfg { + pins = "p2_3"; + function = "uart3"; + bias-disable; + }; + }; +}; + +&enet_tx_clk { + clock-frequency = <50000000>; +}; + +&mac { + status = "okay"; + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&enet_rmii_pins>; +}; + +&ssp1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&ssp_pins>; + cs-gpios = <&gpio LPC_GPIO(5,15) GPIO_ACTIVE_HIGH>; + num-cs = <1>; +}; + +&uart2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; diff --git a/arch/arm/boot/dts/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/lpc4350-hitex-eval.dts index d04072f40817..32bc7ff4eb2a 100644 --- a/arch/arm/boot/dts/lpc4350-hitex-eval.dts +++ b/arch/arm/boot/dts/lpc4350-hitex-eval.dts @@ -36,10 +36,250 @@ }; }; -&pll1 { - clock-mult = <15>; +&pinctrl { + emc_pins: emc-pins { + emc_addr0_23_cfg { + pins = "p2_9", "p2_10", "p2_11", "p2_12", + "p2_13", "p1_0", "p1_1", "p1_2", + "p2_8", "p2_7", "p2_6", "p2_2", + "p2_1", "p2_0", "p6_8", "p6_7", + "pd_16", "pd_15", "pe_0", "pe_1", + "pe_2", "pe_3", "pe_4", "pa_4"; + function = "emc"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + emc_data0_15_cfg { + pins = "p1_7", "p1_8", "p1_9", "p1_10", + "p1_11", "p1_12", "p1_13", "p1_14", + "p5_4", "p5_5", "p5_6", "p5_7", + "p5_0", "p5_1", "p5_2", "p5_3"; + function = "emc"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + emc_we_oe_cfg { + pins = "p1_6", "p1_3"; + function = "emc"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + emc_bls0_3_cfg { + pins = "p1_4", "p6_6", "pd_13", "pd_10"; + function = "emc"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + emc_cs0_cs2_cfg { + pins = "p1_5", "pd_12"; + function = "emc"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + emc_sdram_dqm0_3_cfg { + pins = "p6_12", "p6_10", "pd_0", "pe_13"; + function = "emc"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + emc_sdram_ras_cas_cfg { + pins = "p6_5", "p6_4"; + function = "emc"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + emc_sdram_dycs0_cfg { + pins = "p6_9"; + function = "emc"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + emc_sdram_cke_cfg { + pins = "p6_11"; + function = "emc"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + emc_sdram_clock_cfg { + pins = "clk0", "clk1", "clk2", "clk3"; + function = "emc"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + }; + + enet_mii_pins: enet-mii-pins { + enet_mii_rxd0_3_cfg { + pins = "p1_15", "p0_0", "p9_3", "p9_2"; + function = "enet"; + bias-disable; + input-enable; + }; + + enet_mii_txd0_3_cfg { + pins = "p1_18", "p1_20", "p9_4", "p9_5"; + function = "enet"; + bias-disable; + }; + + enet_mii_crs_col_cfg { + pins = "p9_0", "p9_6"; + function = "enet"; + bias-disable; + input-enable; + }; + + enet_mii_rx_clk_dv_er_cfg { + pins = "pc_0", "p1_16", "p9_1"; + function = "enet"; + bias-disable; + input-enable; + }; + + enet_mii_tx_clk_en_cfg { + pins = "p1_19", "p0_1"; + function = "enet"; + bias-disable; + input-enable; + }; + + enet_mdio_cfg { + pins = "p1_17"; + function = "enet"; + bias-disable; + input-enable; + }; + + enet_mdc_cfg { + pins = "pc_1"; + function = "enet"; + bias-disable; + }; + }; + + uart0_pins: uart0-pins { + uart0_rx_cfg { + pins = "pf_11"; + function = "uart0"; + input-schmitt-disable; + bias-disable; + input-enable; + }; + + uart0_tx_cfg { + pins = "pf_10"; + function = "uart0"; + bias-pull-down; + }; + }; +}; + +&emc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&emc_pins>; + + cs0 { + #address-cells = <2>; + #size-cells = <1>; + ranges; + + mpmc,cs = <0>; + mpmc,memory-width = <16>; + mpmc,byte-lane-low; + mpmc,write-enable-delay = <0>; + mpmc,output-enable-delay = <0>; + mpmc,read-access-delay = <70>; + mpmc,page-mode-read-delay = <70>; + + flash@0,0 { + compatible = "sst,sst39vf320", "cfi-flash"; + reg = <0 0 0x400000>; + bank-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bootloader"; + reg = <0x000000 0x040000>; /* 256 KiB */ + }; + + partition@1 { + label = "kernel"; + reg = <0x040000 0x2C0000>; /* 2.75 MiB */ + }; + + partition@2 { + label = "rootfs"; + reg = <0x300000 0x100000>; /* 1 MiB */ + }; + }; + }; + + cs2 { + #address-cells = <2>; + #size-cells = <1>; + ranges; + + mpmc,cs = <2>; + mpmc,memory-width = <16>; + mpmc,byte-lane-low; + mpmc,write-enable-delay = <0>; + mpmc,output-enable-delay = <30>; + mpmc,read-access-delay = <90>; + mpmc,page-mode-read-delay = <55>; + mpmc,write-access-delay = <55>; + mpmc,turn-round-delay = <55>; + + ext_sram: sram@2,0 { + compatible = "mmio-sram"; + reg = <2 0 0x80000>; /* 512 KiB SRAM on IS62WV25616 */ + }; + }; +}; + +&enet_tx_clk { + clock-frequency = <25000000>; +}; + +&mac { + status = "okay"; + phy-mode = "mii"; + pinctrl-names = "default"; + pinctrl-0 = <&enet_mii_pins>; }; &uart0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; }; diff --git a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts index 08a6f757f924..5f7bdad80963 100644 --- a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts +++ b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts @@ -15,6 +15,9 @@ #include "lpc18xx.dtsi" #include "lpc4357.dtsi" +#include "dt-bindings/input/input.h" +#include "dt-bindings/gpio/gpio.h" + / { model = "Embedded Artists' LPC4357 Developer's Kit"; compatible = "ea,lpc4357-developers-kit", "nxp,lpc4357", "nxp,lpc4350"; @@ -34,8 +37,472 @@ device_type = "memory"; reg = <0x28000000 0x2000000>; /* 32 MB */ }; + + /* vmmc is controlled by sdmmc host internally */ + vmmc: vmmc_fixed { + compatible = "regulator-fixed"; + regulator-name = "vmmc-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + gpio_joystick { + compatible = "gpio-keys-polled"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_joystick_pins>; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + autorepeat; + + button@0 { + label = "joy_enter"; + linux,code = <KEY_ENTER>; + gpios = <&gpio LPC_GPIO(4,8) GPIO_ACTIVE_LOW>; + }; + + button@1 { + label = "joy_left"; + linux,code = <KEY_LEFT>; + gpios = <&gpio LPC_GPIO(4,9) GPIO_ACTIVE_LOW>; + }; + + button@2 { + label = "joy_up"; + linux,code = <KEY_UP>; + gpios = <&gpio LPC_GPIO(4,10) GPIO_ACTIVE_LOW>; + }; + + button@3 { + label = "joy_right"; + linux,code = <KEY_RIGHT>; + gpios = <&gpio LPC_GPIO(4,12) GPIO_ACTIVE_LOW>; + }; + + button@4 { + label = "joy_down"; + linux,code = <KEY_DOWN>; + gpios = <&gpio LPC_GPIO(4,13) GPIO_ACTIVE_LOW>; + }; + }; + + leds_mmio { + compatible = "gpio-leds"; + + led1 { + gpios = <&mmio_leds 15 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led2 { + gpios = <&mmio_leds 14 GPIO_ACTIVE_HIGH>; + }; + + led3 { + gpios = <&mmio_leds 13 GPIO_ACTIVE_HIGH>; + }; + + led4 { + gpios = <&mmio_leds 12 GPIO_ACTIVE_HIGH>; + }; + + led5 { + gpios = <&mmio_leds 11 GPIO_ACTIVE_HIGH>; + }; + + led6 { + gpios = <&mmio_leds 10 GPIO_ACTIVE_HIGH>; + }; + + led7 { + gpios = <&mmio_leds 9 GPIO_ACTIVE_HIGH>; + }; + + led8 { + gpios = <&mmio_leds 8 GPIO_ACTIVE_HIGH>; + }; + + led9 { + gpios = <&mmio_leds 7 GPIO_ACTIVE_HIGH>; + }; + + led10 { + gpios = <&mmio_leds 6 GPIO_ACTIVE_HIGH>; + }; + + led11 { + gpios = <&mmio_leds 5 GPIO_ACTIVE_HIGH>; + }; + + led12 { + gpios = <&mmio_leds 4 GPIO_ACTIVE_HIGH>; + }; + + led13 { + gpios = <&mmio_leds 3 GPIO_ACTIVE_HIGH>; + }; + + led14 { + gpios = <&mmio_leds 2 GPIO_ACTIVE_HIGH>; + }; + + led15 { + gpios = <&mmio_leds 1 GPIO_ACTIVE_HIGH>; + }; + + led16 { + gpios = <&mmio_leds 0 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&pinctrl { + emc_pins: emc-pins { + emc_addr0_23_cfg { + pins = "p2_9", "p2_10", "p2_11", "p2_12", + "p2_13", "p1_0", "p1_1", "p1_2", + "p2_8", "p2_7", "p2_6", "p2_2", + "p2_1", "p2_0", "p6_8", "p6_7", + "pd_16", "pd_15", "pe_0", "pe_1", + "pe_2", "pe_3", "pe_4", "pa_4"; + function = "emc"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + emc_data0_31_cfg { + pins = "p1_7", "p1_8", "p1_9", "p1_10", + "p1_11", "p1_12", "p1_13", "p1_14", + "p5_4", "p5_5", "p5_6", "p5_7", + "p5_0", "p5_1", "p5_2", "p5_3", + "pd_2", "pd_3", "pd_4", "pd_5", + "pd_6", "pd_7", "pd_8", "pd_9", + "pe_5", "pe_6", "pe_7", "pe_8", + "pe_9", "pe_10", "pe_11", "pe_12"; + function = "emc"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + emc_we_oe_cfg { + pins = "p1_6", "p1_3"; + function = "emc"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + emc_bls0_3_cfg { + pins = "p1_4", "p6_6", "pd_13", "pd_10"; + function = "emc"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + emc_cs0_3_cfg { + pins = "p1_5", "p6_3", "pd_12", "pd_11"; + function = "emc"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + emc_sdram_dqm0_3_cfg { + pins = "p6_12", "p6_10", "pd_0", "pe_13"; + function = "emc"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + emc_sdram_ras_cas_cfg { + pins = "p6_5", "p6_4"; + function = "emc"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + emc_sdram_dycs0_cfg { + pins = "p6_9"; + function = "emc"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + emc_sdram_cke_cfg { + pins = "p6_11"; + function = "emc"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + emc_sdram_clock_cfg { + pins = "clk0", "clk1", "clk2", "clk3"; + function = "emc"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + }; + + enet_rmii_pins: enet-rmii-pins { + enet_rmii_rxd_cfg { + pins = "p1_15", "p0_0"; + function = "enet"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + enet_rmii_txd_cfg { + pins = "p1_18", "p1_20"; + function = "enet"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + enet_rmii_rx_dv_cfg { + pins = "p1_16"; + function = "enet"; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + enet_rmii_tx_en_cfg { + pins = "p0_1"; + function = "enet"; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + enet_ref_clk_cfg { + pins = "p1_19"; + function = "enet"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + enet_mdio_cfg { + pins = "p1_17"; + function = "enet"; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + enet_mdc_cfg { + pins = "pc_1"; + function = "enet"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + }; + + gpio_joystick_pins: gpio-joystick-pins { + gpio_joystick_cfg { + pins = "p9_0", "p9_1", "pa_1", "pa_2", "pa_3"; + function = "gpio"; + input-enable; + bias-disable; + }; + }; + + sdmmc_pins: sdmmc-pins { + sdmmc_clk_cfg { + pins = "pc_0"; + function = "sdmmc"; + slew-rate = <1>; + bias-pull-down; + }; + + sdmmc_cmd_dat0_3_cfg { + pins = "pc_4", "pc_5", "pc_6", "pc_7", "pc_10"; + function = "sdmmc"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + sdmmc_cd_cfg { + pins = "pc_8"; + function = "sdmmc"; + bias-pull-down; + input-enable; + }; + + sdmmc_pow_cfg { + pins = "pc_9"; + function = "sdmmc"; + bias-pull-down; + }; + }; + + uart0_pins: uart0-pins { + uart0_rx_cfg { + pins = "pf_11"; + function = "uart0"; + input-schmitt-disable; + bias-disable; + input-enable; + }; + + uart0_tx_cfg { + pins = "pf_10"; + function = "uart0"; + bias-pull-down; + }; + }; + + uart3_pins: uart3-pins { + uart3_rx_cfg { + pins = "p2_4"; + function = "uart3"; + input-schmitt-disable; + bias-disable; + input-enable; + }; + + uart3_tx_cfg { + pins = "p9_3"; + function = "uart3"; + bias-pull-down; + }; + }; + + usb0_pins: usb0-pins { + usb0_pwr_enable { + pins = "p2_3"; + function = "usb0"; + }; + + usb0_pwr_fault { + pins = "p8_0"; + function = "usb0"; + bias-disable; + input-enable; + }; + }; +}; + +&emc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&emc_pins>; + + cs0 { + #address-cells = <2>; + #size-cells = <1>; + ranges; + + mpmc,cs = <0>; + mpmc,memory-width = <16>; + mpmc,byte-lane-low; + mpmc,write-enable-delay = <0>; + mpmc,output-enable-delay = <0>; + mpmc,read-access-delay = <70>; + mpmc,page-mode-read-delay = <70>; + + flash@0,0 { + compatible = "sst,sst39vf320", "cfi-flash"; + reg = <0 0 0x400000>; + bank-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bootloader"; + reg = <0x000000 0x040000>; /* 256 KiB */ + }; + + partition@1 { + label = "kernel"; + reg = <0x040000 0x2c0000>; /* 2.75 MiB */ + }; + + partition@2 { + label = "rootfs"; + reg = <0x300000 0x100000>; /* 1 MiB */ + }; + }; + }; + + cs2 { + #address-cells = <2>; + #size-cells = <1>; + ranges; + + mpmc,cs = <2>; + mpmc,memory-width = <16>; + + mmio_leds: gpio@2,0 { + compatible = "ti,7416374"; + reg = <2 0 0x2>; + gpio-controller; + #gpio-cells = <2>; + }; + + }; +}; + +&enet_tx_clk { + clock-frequency = <50000000>; +}; + +&mac { + status = "okay"; + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&enet_rmii_pins>; +}; + +&mmcsd { + status = "okay"; + bus-width = <4>; + vmmc-supply = <&vmmc>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pins>; }; &uart0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; + +&usb0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins>; }; diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts index 9c5e16ba8c95..0521e6864cb7 100644 --- a/arch/arm/boot/dts/ls1021a-qds.dts +++ b/arch/arm/boot/dts/ls1021a-qds.dts @@ -58,6 +58,55 @@ enet0_sgmii_phy = &sgmii_phy1c; enet1_sgmii_phy = &sgmii_phy1d; }; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_3p3v: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Speaker", "Speaker Ext", + "Line", "Line In Jack"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "Microphone Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "Speaker Ext", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + frame-master; + bitclock-master; + }; + + simple-audio-card,codec { + sound-dai = <&codec>; + frame-master; + bitclock-master; + }; + }; }; &dspi0 { @@ -75,10 +124,31 @@ }; }; +&enet0 { + tbi-handle = <&tbi0>; + phy-handle = <&sgmii_phy1c>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&enet1 { + tbi-handle = <&tbi0>; + phy-handle = <&sgmii_phy1d>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&enet2 { + phy-handle = <&rgmii_phy3>; + phy-connection-type = "rgmii-id"; + status = "okay"; +}; + &i2c0 { status = "okay"; pca9547: mux@77 { + compatible = "nxp,pca9547"; reg = <0x77>; #address-cells = <1>; #size-cells = <0>; @@ -133,6 +203,21 @@ reg = <0x4c>; }; }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4>; + + codec: sgtl5000@2a { + #sound-dai-cells = <0>; + compatible = "fsl,sgtl5000"; + reg = <0x2a>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + clocks = <&sys_mclk 1>; + }; + }; }; }; @@ -231,6 +316,10 @@ }; }; +&sai2 { + status = "okay"; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts index a2c591e2d918..e008f9367510 100644 --- a/arch/arm/boot/dts/ls1021a-twr.dts +++ b/arch/arm/boot/dts/ls1021a-twr.dts @@ -56,6 +56,55 @@ enet0_sgmii_phy = &sgmii_phy2; enet1_sgmii_phy = &sgmii_phy0; }; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_3p3v: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Speaker", "Speaker Ext", + "Line", "Line In Jack"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "Microphone Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "Speaker Ext", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sai1>; + frame-master; + bitclock-master; + }; + + simple-audio-card,codec { + sound-dai = <&codec>; + frame-master; + bitclock-master; + }; + }; }; &dspi1 { @@ -73,12 +122,40 @@ }; }; +&enet0 { + tbi-handle = <&tbi1>; + phy-handle = <&sgmii_phy2>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&enet1 { + tbi-handle = <&tbi1>; + phy-handle = <&sgmii_phy0>; + phy-connection-type = "sgmii"; + status = "okay"; +}; + +&enet2 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii-id"; + status = "okay"; +}; + &i2c0 { status = "okay"; }; &i2c1 { status = "okay"; + codec: sgtl5000@a { + #sound-dai-cells = <0>; + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + clocks = <&sys_mclk 1>; + }; }; &ifc { @@ -118,6 +195,10 @@ }; }; +&sai1 { + status = "okay"; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index c70bb27ac65a..973a496207fc 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -53,6 +53,9 @@ interrupt-parent = <&gic>; aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; serial0 = &lpuart0; serial1 = &lpuart1; serial2 = &lpuart2; @@ -184,7 +187,7 @@ }; dspi0: dspi@2100000 { - compatible = "fsl,vf610-dspi"; + compatible = "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2100000 0x0 0x10000>; @@ -197,7 +200,7 @@ }; dspi1: dspi@2110000 { - compatible = "fsl,vf610-dspi"; + compatible = "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2110000 0x0 0x10000>; @@ -342,28 +345,30 @@ }; sai1: sai@2b50000 { + #sound-dai-cells = <0>; compatible = "fsl,vf610-sai"; reg = <0x0 0x2b50000 0x0 0x10000>; interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&platform_clk 1>; - clock-names = "sai"; + clocks = <&platform_clk 1>, <&platform_clk 1>, + <&platform_clk 1>, <&platform_clk 1>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; dma-names = "tx", "rx"; dmas = <&edma0 1 47>, <&edma0 1 46>; - big-endian; status = "disabled"; }; sai2: sai@2b60000 { + #sound-dai-cells = <0>; compatible = "fsl,vf610-sai"; reg = <0x0 0x2b60000 0x0 0x10000>; interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&platform_clk 1>; - clock-names = "sai"; + clocks = <&platform_clk 1>, <&platform_clk 1>, + <&platform_clk 1>, <&platform_clk 1>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; dma-names = "tx", "rx"; dmas = <&edma0 1 45>, <&edma0 1 44>; - big-endian; status = "disabled"; }; @@ -391,6 +396,91 @@ reg = <0x0 0x2d24000 0x0 0x4000>; }; + enet0: ethernet@2d10000 { + compatible = "fsl,etsec2"; + device_type = "network"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + model = "eTSEC"; + fsl,magic-packet; + ranges; + + queue-group@2d10000 { + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x2d10000 0x0 0x1000>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + }; + + queue-group@2d14000 { + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x2d14000 0x0 0x1000>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + enet1: ethernet@2d50000 { + compatible = "fsl,etsec2"; + device_type = "network"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + model = "eTSEC"; + ranges; + + queue-group@2d50000 { + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x2d50000 0x0 0x1000>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + }; + + queue-group@2d54000 { + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x2d54000 0x0 0x1000>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + enet2: ethernet@2d90000 { + compatible = "fsl,etsec2"; + device_type = "network"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + model = "eTSEC"; + ranges; + + queue-group@2d90000 { + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x2d90000 0x0 0x1000>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + }; + + queue-group@2d94000 { + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x2d94000 0x0 0x1000>; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + usb@8600000 { compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr"; reg = <0x0 0x8600000 0x0 0x1000>; diff --git a/arch/arm/boot/dts/mt6580-evbp1.dts b/arch/arm/boot/dts/mt6580-evbp1.dts new file mode 100644 index 000000000000..17daeae6bbe8 --- /dev/null +++ b/arch/arm/boot/dts/mt6580-evbp1.dts @@ -0,0 +1,38 @@ +/* + * Copyright (c) 2015 MediaTek Inc. + * Author: Mars.C <mars.cheng@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; +#include "mt6580.dtsi" + +/ { + model = "MediaTek MT6580 evaluation board"; + compatible = "mediatek,mt6580-evbp1", "mediatek,mt6580"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:921600n8"; + }; + + memory { + reg = <0x80000000 0x20000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/mt6580.dtsi b/arch/arm/boot/dts/mt6580.dtsi new file mode 100644 index 000000000000..06fdf6c2d5fd --- /dev/null +++ b/arch/arm/boot/dts/mt6580.dtsi @@ -0,0 +1,116 @@ +/* + * Copyright (c) 2015 MediaTek Inc. + * Author: Mars.C <mars.cheng@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "skeleton.dtsi" + +/ { + compatible = "mediatek,mt6580"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&sysirq>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + }; + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x2>; + }; + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x3>; + }; + + }; + + system_clk: dummy13m { + compatible = "fixed-clock"; + clock-frequency = <13000000>; + #clock-cells = <0>; + }; + + rtc_clk: dummy32k { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + + uart_clk: dummy26m { + compatible = "fixed-clock"; + clock-frequency = <26000000>; + #clock-cells = <0>; + }; + + timer: timer@10008000 { + compatible = "mediatek,mt6580-timer", + "mediatek,mt6577-timer"; + reg = <0x10008000 0x80>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>; + clocks = <&system_clk>, <&rtc_clk>; + clock-names = "system-clk", "rtc-clk"; + }; + + sysirq: interrupt-controller@10200100 { + compatible = "mediatek,mt6580-sysirq", + "mediatek,mt6577-sysirq"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0x10200100 0x1c>; + }; + + gic: interrupt-controller@10211000 { + compatible = "arm,cortex-a7-gic"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0x10211000 0x1000>, + <0x10212000 0x1000>, + <0x10214000 0x2000>, + <0x10216000 0x2000>; + }; + + uart0: serial@11005000 { + compatible = "mediatek,mt6580-uart", + "mediatek,mt6577-uart"; + reg = <0x11005000 0x400>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart1: serial@11006000 { + compatible = "mediatek,mt6580-uart", + "mediatek,mt6577-uart"; + reg = <0x11006000 0x400>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/mt8135-evbp1.dts b/arch/arm/boot/dts/mt8135-evbp1.dts index 36677382bdd8..357a91fc2d1d 100644 --- a/arch/arm/boot/dts/mt8135-evbp1.dts +++ b/arch/arm/boot/dts/mt8135-evbp1.dts @@ -24,6 +24,199 @@ }; }; +&pwrap { + pmic: mt6397 { + compatible = "mediatek,mt6397"; + + mt6397regulator: mt6397regulator { + compatible = "mediatek,mt6397-regulator"; + + mt6397_vpca15_reg: buck_vpca15 { + regulator-compatible = "buck_vpca15"; + regulator-name = "vpca15"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + }; + + mt6397_vpca7_reg: buck_vpca7 { + regulator-compatible = "buck_vpca7"; + regulator-name = "vpca7"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + }; + + mt6397_vsramca15_reg: buck_vsramca15 { + regulator-compatible = "buck_vsramca15"; + regulator-name = "vsramca15"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + }; + + mt6397_vsramca7_reg: buck_vsramca7 { + regulator-compatible = "buck_vsramca7"; + regulator-name = "vsramca7"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + }; + + mt6397_vcore_reg: buck_vcore { + regulator-compatible = "buck_vcore"; + regulator-name = "vcore"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + }; + + mt6397_vgpu_reg: buck_vgpu { + regulator-compatible = "buck_vgpu"; + regulator-name = "vgpu"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <115>; + }; + + mt6397_vdrm_reg: buck_vdrm { + regulator-compatible = "buck_vdrm"; + regulator-name = "vdrm"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1400000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + }; + + mt6397_vio18_reg: buck_vio18 { + regulator-compatible = "buck_vio18"; + regulator-name = "vio18"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-ramp-delay = <12500>; + regulator-always-on; + }; + + mt6397_vtcxo_reg: ldo_vtcxo { + regulator-compatible = "ldo_vtcxo"; + regulator-name = "vtcxo"; + regulator-always-on; + }; + + mt6397_va28_reg: ldo_va28 { + regulator-compatible = "ldo_va28"; + regulator-name = "va28"; + regulator-always-on; + }; + + mt6397_vcama_reg: ldo_vcama { + regulator-compatible = "ldo_vcama"; + regulator-name = "vcama"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vio28_reg: ldo_vio28 { + regulator-compatible = "ldo_vio28"; + regulator-name = "vio28"; + regulator-always-on; + }; + + mt6397_vusb_reg: ldo_vusb { + regulator-compatible = "ldo_vusb"; + regulator-name = "vusb"; + }; + + mt6397_vmc_reg: ldo_vmc { + regulator-compatible = "ldo_vmc"; + regulator-name = "vmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vmch_reg: ldo_vmch { + regulator-compatible = "ldo_vmch"; + regulator-name = "vmch"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vemc_3v3_reg: ldo_vemc3v3 { + regulator-compatible = "ldo_vemc3v3"; + regulator-name = "vemc_3v3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp1_reg: ldo_vgp1 { + regulator-compatible = "ldo_vgp1"; + regulator-name = "vcamd"; + regulator-min-microvolt = <1220000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <240>; + }; + + mt6397_vgp2_reg: ldo_vgp2 { + regulator-compatible = "ldo_vgp2"; + regulator-name = "vcamio"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp3_reg: ldo_vgp3 { + regulator-compatible = "ldo_vgp3"; + regulator-name = "vcamaf"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp4_reg: ldo_vgp4 { + regulator-compatible = "ldo_vgp4"; + regulator-name = "vgp4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp5_reg: ldo_vgp5 { + regulator-compatible = "ldo_vgp5"; + regulator-name = "vgp5"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp6_reg: ldo_vgp6 { + regulator-compatible = "ldo_vgp6"; + regulator-name = "vgp6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vibr_reg: ldo_vibr { + regulator-compatible = "ldo_vibr"; + regulator-name = "vibr"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + }; + }; +}; + &uart3 { status = "okay"; }; diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi index 0aba9eb28e2b..08371dbae543 100644 --- a/arch/arm/boot/dts/mt8135.dtsi +++ b/arch/arm/boot/dts/mt8135.dtsi @@ -12,8 +12,10 @@ * GNU General Public License for more details. */ +#include <dt-bindings/clock/mt8135-clk.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset-controller/mt8135-resets.h> #include "skeleton64.dtsi" #include "mt8135-pinfunc.h" @@ -88,12 +90,11 @@ #clock-cells = <0>; }; - uart_clk: dummy26m { + clk26m: clk26m { compatible = "fixed-clock"; - clock-frequency = <26000000>; #clock-cells = <0>; + clock-frequency = <26000000>; }; - }; soc { @@ -102,6 +103,26 @@ compatible = "simple-bus"; ranges; + topckgen: topckgen@10000000 { + compatible = "mediatek,mt8135-topckgen"; + reg = <0 0x10000000 0 0x1000>; + #clock-cells = <1>; + }; + + infracfg: infracfg@10001000 { + #reset-cells = <1>; + #clock-cells = <1>; + compatible = "mediatek,mt8135-infracfg", "syscon"; + reg = <0 0x10001000 0 0x1000>; + }; + + pericfg: pericfg@10003000 { + #reset-cells = <1>; + #clock-cells = <1>; + compatible = "mediatek,mt8135-pericfg", "syscon"; + reg = <0 0x10003000 0 0x1000>; + }; + /* * Pinctrl access register at 0x10005000 and 0x1020c000 through * regmap. Register 0x1000b000 is used by EINT. @@ -134,6 +155,19 @@ clock-names = "system-clk", "rtc-clk"; }; + pwrap: pwrap@1000f000 { + compatible = "mediatek,mt8135-pwrap"; + reg = <0 0x1000f000 0 0x1000>, + <0 0x11017000 0 0x1000>; + reg-names = "pwrap", "pwrap-bridge"; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; + resets = <&infracfg MT8135_INFRA_PMIC_WRAP_RST>, + <&pericfg MT8135_PERI_PWRAP_BRIDGE_SW_RST>; + reset-names = "pwrap", "pwrap-bridge"; + clocks = <&clk26m>, <&clk26m>; + clock-names = "spi", "wrap"; + }; + sysirq: interrupt-controller@10200030 { compatible = "mediatek,mt8135-sysirq", "mediatek,mt6577-sysirq"; @@ -143,6 +177,12 @@ reg = <0 0x10200030 0 0x1c>; }; + apmixedsys: apmixedsys@10209000 { + compatible = "mediatek,mt8135-apmixedsys"; + reg = <0 0x10209000 0 0x1000>; + #clock-cells = <1>; + }; + syscfg_pctl_b: syscfg_pctl_b@1020c000 { compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon"; reg = <0 0x1020c000 0 0x1000>; @@ -163,7 +203,8 @@ compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart"; reg = <0 0x11006000 0 0x400>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>; + clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>; + clock-names = "baud", "bus"; status = "disabled"; }; @@ -171,7 +212,8 @@ compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart"; reg = <0 0x11007000 0 0x400>; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>; + clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>; + clock-names = "baud", "bus"; status = "disabled"; }; @@ -179,7 +221,8 @@ compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart"; reg = <0 0x11008000 0 0x400>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>; + clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>; + clock-names = "baud", "bus"; status = "disabled"; }; @@ -187,7 +230,8 @@ compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart"; reg = <0 0x11009000 0 0x400>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>; + clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>; + clock-names = "baud", "bus"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi new file mode 100644 index 000000000000..9ca2865a83d6 --- /dev/null +++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi @@ -0,0 +1,369 @@ +/* + * Author: Anil Kumar <anilk4.v@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/input/input.h> + +#include "omap34xx.dtsi" +/ { + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + leds { + compatible = "gpio-leds"; + + heartbeat { + label = "devkit8000::led1"; + gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>; /* 186 -> LED1 */ + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + mmc { + label = "devkit8000::led2"; + gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 -> LED2 */ + default-state = "on"; + linux,default-trigger = "none"; + }; + + usr { + label = "devkit8000::led3"; + gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* 164 -> LED3 */ + default-state = "on"; + linux,default-trigger = "usr"; + }; + + pmu_stat { + label = "devkit8000::pmu_stat"; + gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */ + }; + }; + + sound { + compatible = "ti,omap-twl4030"; + ti,model = "devkit8000"; + + ti,mcbsp = <&mcbsp2>; + ti,audio-routing = + "Ext Spk", "PREDRIVEL", + "Ext Spk", "PREDRIVER", + "MAINMIC", "Main Mic", + "Main Mic", "Mic Bias 1"; + }; + + gpio_keys { + compatible = "gpio-keys"; + + user { + label = "user"; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; + linux,code = <BTN_EXTRA>; + gpio-key,wakeup; + }; + }; + + tfp410: encoder@0 { + compatible = "ti,tfp410"; + powerdown-gpios = <&twl_gpio 7 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tfp410_in: endpoint@0 { + remote-endpoint = <&dpi_dvi_out>; + }; + }; + + port@1 { + reg = <1>; + + tfp410_out: endpoint@0 { + remote-endpoint = <&dvi_connector_in>; + }; + }; + }; + }; + + dvi0: connector@0 { + compatible = "dvi-connector"; + label = "dvi"; + + digital; + + ddc-i2c-bus = <&i2c2>; + + port { + dvi_connector_in: endpoint { + remote-endpoint = <&tfp410_out>; + }; + }; + }; + + tv0: connector@1 { + compatible = "svideo-connector"; + label = "tv"; + + port { + tv_connector_in: endpoint { + remote-endpoint = <&venc_out>; + }; + }; + }; +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + + twl_audio: audio { + compatible = "ti,twl4030-audio"; + codec { + }; + }; + }; +}; + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + status = "disabled"; +}; + +#include "twl4030.dtsi" +#include "twl4030_omap3.dtsi" + +&mmc1 { + vmmc-supply = <&vmmc1>; + vmmc_aux-supply = <&vsim>; + bus-width = <8>; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; + +&twl_gpio { + ti,use-leds; + /* + * pulldowns: + * BIT(1), BIT(2), BIT(6), BIT(7), BIT(8), BIT(13) + * BIT(15), BIT(16), BIT(17) + */ + ti,pulldowns = <0x03a1c6>; +}; + +&twl_keypad { + linux,keymap = <MATRIX_KEY(0, 0, KEY_1) + MATRIX_KEY(1, 0, KEY_2) + MATRIX_KEY(2, 0, KEY_3) + MATRIX_KEY(0, 1, KEY_4) + MATRIX_KEY(1, 1, KEY_5) + MATRIX_KEY(2, 1, KEY_6) + MATRIX_KEY(3, 1, KEY_F5) + MATRIX_KEY(0, 2, KEY_7) + MATRIX_KEY(1, 2, KEY_8) + MATRIX_KEY(2, 2, KEY_9) + MATRIX_KEY(3, 2, KEY_F6) + MATRIX_KEY(0, 3, KEY_F7) + MATRIX_KEY(1, 3, KEY_0) + MATRIX_KEY(2, 3, KEY_F8) + MATRIX_KEY(4, 5, KEY_RESERVED) + MATRIX_KEY(4, 4, KEY_VOLUMEUP) + MATRIX_KEY(5, 5, KEY_VOLUMEDOWN) + >; +}; + +&wdt2 { + status = "disabled"; +}; + +&mcbsp2 { + status = "okay"; +}; + +&gpmc { + ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ + + nand@0,0 { + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + nand-bus-width = <16>; + gpmc,device-width = <2>; + ti,nand-ecc-opt = "sw"; + + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-off-ns = <40>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + + #address-cells = <1>; + #size-cells = <1>; + + x-loader@0 { + label = "X-Loader"; + reg = <0 0x80000>; + }; + + bootloaders@80000 { + label = "U-Boot"; + reg = <0x80000 0x1e0000>; + }; + + bootloaders_env@260000 { + label = "U-Boot Env"; + reg = <0x260000 0x20000>; + }; + + kernel@280000 { + label = "Kernel"; + reg = <0x280000 0x400000>; + }; + + filesystem@680000 { + label = "File System"; + reg = <0x680000 0xf980000>; + }; + }; +}; + +&gpmc { + ranges = <6 0 0x2c000000 0x1000000>; /* CS6: 16MB for DM9000 */ + + ethernet@0,0 { + compatible = "davicom,dm9000"; + reg = <6 0x000 2 + 6 0x400 2>; /* CS6, offset 0 and 0x400, IO size 2 */ + bank-width = <2>; + interrupt-parent = <&gpio1>; + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + davicom,no-eeprom; + + gpmc,mux-add-data = <0>; + gpmc,device-width = <1>; + gpmc,wait-pin = <0>; + gpmc,cycle2cycle-samecsen = <1>; + gpmc,cycle2cycle-diffcsen = <1>; + + gpmc,cs-on-ns = <6>; + gpmc,cs-rd-off-ns = <180>; + gpmc,cs-wr-off-ns = <180>; + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <18>; + gpmc,adv-wr-off-ns = <48>; + gpmc,oe-on-ns = <54>; + gpmc,oe-off-ns = <168>; + gpmc,we-on-ns = <54>; + gpmc,we-off-ns = <168>; + gpmc,rd-cycle-ns = <186>; + gpmc,wr-cycle-ns = <186>; + gpmc,access-ns = <144>; + gpmc,page-burst-access-ns = <24>; + gpmc,bus-turnaround-ns = <90>; + gpmc,cycle2cycle-delay-ns = <90>; + gpmc,wait-monitoring-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wr-data-mux-bus-ns = <0>; + gpmc,wr-access-ns = <0>; + }; +}; + +&omap3_pmx_core { + dss_dpi_pins: pinmux_dss_dpi_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + >; + }; +}; + +&vpll1 { + /* Needed for DSS */ + regulator-name = "vdds_dsi"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; +}; + +&dss { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_dpi_pins>; + + vdds_dsi-supply = <&vpll1>; + vdda_dac-supply = <&vdac>; + + port { + dpi_dvi_out: endpoint@0 { + remote-endpoint = <&tfp410_in>; + data-lines = <24>; + }; + }; +}; + +&venc { + status = "ok"; + + vdda-supply = <&vdac>; + + port { + venc_out: endpoint { + remote-endpoint = <&tv_connector_in>; + ti,channels = <2>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi new file mode 100644 index 000000000000..e84184de2a4a --- /dev/null +++ b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi @@ -0,0 +1,73 @@ +/* + * Author: Anthoine Bourgeois <anthoine.bourgois@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-devkit8000-common.dtsi" +/ { + aliases { + display0 = &lcd0; + display1 = &dvi0; + display2 = &tv0; + }; + + lcd0: display@0 { + compatible = "panel-dpi"; + label = "lcd"; + + enable-gpios = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_lcd_out>; + }; + }; + }; +}; + +&dss { + port { + dpi_lcd_out: endpoint@1 { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; + +&vio { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; +}; + +&mcspi2 { + + /* touch controller */ + ads7846@0 { + compatible = "ti,ads7846"; + vcc-supply = <&vio>; + + reg = <0>; /* CS0 */ + spi-max-frequency = <1500000>; + + interrupt-parent = <&gpio1>; + interrupts = <27 0>; /* gpio_27 */ + pendown-gpio = <&gpio1 27 0>; + + ti,x-min = /bits/ 16 <0x0>; + ti,x-max = /bits/ 16 <0x0fff>; + ti,y-min = /bits/ 16 <0x0>; + ti,y-max = /bits/ 16 <0x0fff>; + ti,x-plate-ohms = /bits/ 16 <180>; + ti,pressure-max = /bits/ 16 <255>; + ti,debounce-max = /bits/ 16 <10>; + ti,debounce-tol = /bits/ 16 <5>; + ti,debounce-rep = /bits/ 16 <1>; + ti,keep-vref-on = <1>; + ti,settle-delay-usec = /bits/ 16 <150>; + + linux,wakeup; + }; +}; diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts b/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts new file mode 100644 index 000000000000..d5705356d52c --- /dev/null +++ b/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts @@ -0,0 +1,37 @@ +/* + * Author: Anthoine Bourgeois <anthoine.bourgois@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/* + * 4.3'' LCD panel sold with devkit8000 board + */ + +#include "omap3-devkit8000-lcd-common.dtsi" +/ { + model = "TimLL OMAP3 Devkit8000 with 4.3'' LCD panel"; + compatible = "timll,omap3-devkit8000", "ti,omap3"; + + lcd0: display@0 { + panel-timing { + clock-frequency = <10164705>; + hactive = <480>; + vactive = <272>; + hfront-porch = <2>; + hback-porch = <2>; + hsync-len = <41>; + vback-porch = <2>; + vfront-porch = <2>; + vsync-len = <10>; + + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts b/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts new file mode 100644 index 000000000000..4afad4b233ec --- /dev/null +++ b/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts @@ -0,0 +1,37 @@ +/* + * Author: Anthoine Bourgeois <anthoine.bourgois@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/* + * 7.0'' LCD panel sold with some devkit8000 board + */ + +#include "omap3-devkit8000-lcd-common.dtsi" +/ { + model = "TimLL OMAP3 Devkit8000 with 7.0'' LCD panel"; + compatible = "timll,omap3-devkit8000", "ti,omap3"; + + lcd0: display@0 { + panel-timing { + clock-frequency = <40000000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <1>; + hback-porch = <1>; + hsync-len = <48>; + vback-porch = <25>; + vfront-porch = <12>; + vsync-len = <3>; + + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts index be2297116a14..40ac89482f5d 100644 --- a/arch/arm/boot/dts/omap3-devkit8000.dts +++ b/arch/arm/boot/dts/omap3-devkit8000.dts @@ -1,5 +1,5 @@ /* - * Author: Anil Kumar <anilk4.v@gmail.com> + * Author: Anthoine Bourgeois <anthoine.bourgeois@gmail.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -7,194 +7,13 @@ */ /dts-v1/; -#include "omap34xx.dtsi" +#include "omap3-devkit8000-common.dtsi" / { model = "TimLL OMAP3 Devkit8000"; compatible = "timll,omap3-devkit8000", "ti,omap3"; - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; /* 256 MB */ - }; - - leds { - compatible = "gpio-leds"; - - heartbeat { - label = "devkit8000::led1"; - gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>; /* 186 -> LED1 */ - default-state = "on"; - linux,default-trigger = "heartbeat"; - }; - - mmc { - label = "devkit8000::led2"; - gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 -> LED2 */ - default-state = "on"; - linux,default-trigger = "none"; - }; - - usr { - label = "devkit8000::led3"; - gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* 164 -> LED3 */ - default-state = "on"; - linux,default-trigger = "usr"; - }; - - }; - - sound { - compatible = "ti,omap-twl4030"; - ti,model = "devkit8000"; - - ti,mcbsp = <&mcbsp2>; - ti,audio-routing = - "Ext Spk", "PREDRIVEL", - "Ext Spk", "PREDRIVER", - "MAINMIC", "Main Mic", - "Main Mic", "Mic Bias 1"; - }; -}; - -&i2c1 { - clock-frequency = <2600000>; - - twl: twl@48 { - reg = <0x48>; - interrupts = <7>; /* SYS_NIRQ cascaded to intc */ - - twl_audio: audio { - compatible = "ti,twl4030-audio"; - codec { - }; - }; - }; -}; - -&i2c2 { - status = "disabled"; -}; - -&i2c3 { - status = "disabled"; -}; - -#include "twl4030.dtsi" -#include "twl4030_omap3.dtsi" - -&mmc1 { - vmmc-supply = <&vmmc1>; - vmmc_aux-supply = <&vsim>; - bus-width = <8>; -}; - -&mmc2 { - status = "disabled"; -}; - -&mmc3 { - status = "disabled"; -}; - -&wdt2 { - status = "disabled"; -}; - -&mcbsp2 { - status = "okay"; -}; - -&gpmc { - ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ - - nand@0,0 { - reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ - nand-bus-width = <16>; - gpmc,device-width = <2>; - ti,nand-ecc-opt = "sw"; - - gpmc,sync-clk-ps = <0>; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <44>; - gpmc,cs-wr-off-ns = <44>; - gpmc,adv-on-ns = <6>; - gpmc,adv-rd-off-ns = <34>; - gpmc,adv-wr-off-ns = <44>; - gpmc,we-off-ns = <40>; - gpmc,oe-off-ns = <54>; - gpmc,access-ns = <64>; - gpmc,rd-cycle-ns = <82>; - gpmc,wr-cycle-ns = <82>; - gpmc,wr-access-ns = <40>; - gpmc,wr-data-mux-bus-ns = <0>; - - #address-cells = <1>; - #size-cells = <1>; - - x-loader@0 { - label = "X-Loader"; - reg = <0 0x80000>; - }; - - bootloaders@80000 { - label = "U-Boot"; - reg = <0x80000 0x1e0000>; - }; - - bootloaders_env@260000 { - label = "U-Boot Env"; - reg = <0x260000 0x20000>; - }; - - kernel@280000 { - label = "Kernel"; - reg = <0x280000 0x400000>; - }; - - filesystem@680000 { - label = "File System"; - reg = <0x680000 0xf980000>; - }; - }; -}; - -&gpmc { - ranges = <6 0 0x2c000000 0x1000000>; /* CS6: 16MB for DM9000 */ - - ethernet@0,0 { - compatible = "davicom,dm9000"; - reg = <6 0x000 2 - 6 0x400 2>; /* CS6, offset 0 and 0x400, IO size 2 */ - bank-width = <2>; - interrupt-parent = <&gpio1>; - interrupts = <25 IRQ_TYPE_LEVEL_LOW>; - davicom,no-eeprom; - - gpmc,mux-add-data = <0>; - gpmc,device-width = <1>; - gpmc,wait-pin = <0>; - gpmc,cycle2cycle-samecsen = <1>; - gpmc,cycle2cycle-diffcsen = <1>; - - gpmc,cs-on-ns = <6>; - gpmc,cs-rd-off-ns = <180>; - gpmc,cs-wr-off-ns = <180>; - gpmc,adv-on-ns = <0>; - gpmc,adv-rd-off-ns = <18>; - gpmc,adv-wr-off-ns = <48>; - gpmc,oe-on-ns = <54>; - gpmc,oe-off-ns = <168>; - gpmc,we-on-ns = <54>; - gpmc,we-off-ns = <168>; - gpmc,rd-cycle-ns = <186>; - gpmc,wr-cycle-ns = <186>; - gpmc,access-ns = <144>; - gpmc,page-burst-access-ns = <24>; - gpmc,bus-turnaround-ns = <90>; - gpmc,cycle2cycle-delay-ns = <90>; - gpmc,wait-monitoring-ns = <0>; - gpmc,clk-activation-ns = <0>; - gpmc,wr-data-mux-bus-ns = <0>; - gpmc,wr-access-ns = <0>; + aliases { + display1 = &dvi0; + display2 = &tv0; }; }; diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index e63133304a34..d0dd0365bfda 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -319,12 +319,12 @@ pinctrl-names = "default"; pinctrl-0 = <&tsc2048_pins>; - ti,x-min = <300>; - ti,x-max = <3000>; - ti,y-min = <600>; - ti,y-max = <3600>; - ti,x-plate-ohms = <80>; - ti,pressure-max = <255>; + ti,x-min = /bits/ 16 <300>; + ti,x-max = /bits/ 16 <3000>; + ti,y-min = /bits/ 16 <600>; + ti,y-max = /bits/ 16 <3600>; + ti,x-plate-ohms = /bits/ 16 <80>; + ti,pressure-max = /bits/ 16 <255>; ti,swap-xy; linux,wakeup; diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi index 18e1649681c1..28430f1596f2 100644 --- a/arch/arm/boot/dts/omap3-overo-base.dtsi +++ b/arch/arm/boot/dts/omap3-overo-base.dtsi @@ -218,3 +218,58 @@ pinctrl-0 = <&uart2_pins>; }; +&mcbsp2 { + status = "okay"; +}; + +&gpmc { + ranges = <0 0 0x00000000 0x20000000>; + + nand@0,0 { + linux,mtd-name= "micron,mt29c4g96maz"; + reg = <0 0 0>; + nand-bus-width = <16>; + gpmc,device-width = <2>; + ti,nand-ecc-opt = "bch8"; + + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-off-ns = <40>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "SPL"; + reg = <0 0x80000>; /* 512KiB */ + }; + partition@80000 { + label = "U-Boot"; + reg = <0x80000 0x1C0000>; /* 1792KiB */ + }; + partition@1c0000 { + label = "Environment"; + reg = <0x240000 0x40000>; /* 256KiB */ + }; + partition@280000 { + label = "Kernel"; + reg = <0x280000 0x800000>; /* 8192KiB */ + }; + partition@780000 { + label = "Filesystem"; + reg = <0xA80000 0>; + /* HACK: MTDPART_SIZ_FULL=0 so fill to end */ + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi index df8908adb0cb..80d236ac64a5 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi @@ -62,6 +62,7 @@ OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */ OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */ + OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT | MUX_MODE0) /* mcspi1_cs1.mcspi1_cs1 */ >; }; @@ -123,7 +124,7 @@ label = "lcd35"; reg = <1>; /* CS1 */ - spi-max-frequency = <10000000>; + spi-max-frequency = <500000>; spi-cpol; spi-cpha; diff --git a/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi new file mode 100644 index 000000000000..680d7262399c --- /dev/null +++ b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2015 Ash Charles, Gumstix Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Palo35 expansion board is manufactured by Gumstix Inc. + */ + +#include "omap3-overo-common-peripherals.dtsi" +#include "omap3-overo-common-lcd35.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + heartbeat { + label = "overo:red:gpio21"; + gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */ + linux,default-trigger = "heartbeat"; + }; + gpio22 { + label = "overo:blue:gpio22"; + gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; /* gpio_22 */ + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&button_pins>; + #address-cells = <1>; + #size-cells = <0>; + button0@23 { + label = "button0"; + linux,code = <BTN_0>; + gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */ + gpio-key,wakeup; + }; + button1@14 { + label = "button1"; + linux,code = <BTN_1>; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */ + gpio-key,wakeup; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-overo-palo35.dts b/arch/arm/boot/dts/omap3-overo-palo35.dts new file mode 100644 index 000000000000..e3e2bce6edbb --- /dev/null +++ b/arch/arm/boot/dts/omap3-overo-palo35.dts @@ -0,0 +1,37 @@ +/* + * Copyright (C) 2015 Ash Charles, Gumstix Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Palo35 expansion board is manufactured by Gumstix Inc. + */ + +/dts-v1/; + +#include "omap3-overo.dtsi" +#include "omap3-overo-palo35-common.dtsi" + +/ { + model = "OMAP35xx Gumstix Overo on Palo35"; + compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3"; +}; + +&omap3_pmx_core2 { + led_pins: pinmux_led_pins { + pinctrl-single,pins = < + OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) /* etk_d7.gpio_21 */ + OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 */ + >; + }; + + button_pins: pinmux_button_pins { + pinctrl-single,pins = < + OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4) /* etk_d9.gpio_23 */ + OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4) /* etk_d0.gpio_14 */ + >; + }; +}; diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts new file mode 100644 index 000000000000..4e725d2d0038 --- /dev/null +++ b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts @@ -0,0 +1,37 @@ +/* + * Copyright (C) 2015 Ash Charles, Gumstix, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Palo35 expansion board is manufactured by Gumstix Inc. + */ + +/dts-v1/; + +#include "omap3-overo-storm.dtsi" +#include "omap3-overo-palo35-common.dtsi" + +/ { + model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo35"; + compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; +}; + +&omap3_pmx_core2 { + led_pins: pinmux_led_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) /* etk_d7.gpio_21 */ + OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 */ + >; + }; + + button_pins: pinmux_button_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4) /* etk_d9.gpio_23 */ + OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4) /* etk_d0.gpio_14 */ + >; + }; +}; diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts new file mode 100644 index 000000000000..da6afafcc6c1 --- /dev/null +++ b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts @@ -0,0 +1,21 @@ +/* + * Copyright (C) 2015 Ash Charles, Gumstix, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * TobiDuo expansion board is manufactured by Gumstix Inc. + */ + +/dts-v1/; + +#include "omap3-overo-storm.dtsi" +#include "omap3-overo-tobiduo-common.dtsi" + +/ { + model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on TobiDuo"; + compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; +}; diff --git a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi new file mode 100644 index 000000000000..334109e14613 --- /dev/null +++ b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi @@ -0,0 +1,65 @@ +/* + * Copyright (C) 2015 Ash Charles, Gumstix, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * TobiDuo expansion board is manufactured by Gumstix Inc. + */ + +#include "omap3-overo-common-peripherals.dtsi" + +#include "omap-gpmc-smsc9221.dtsi" + +&gpmc { + ranges = <4 0 0x2b000000 0x1000000>, /* CS4 */ + <5 0 0x2c000000 0x1000000>; /* CS5 */ + + smsc1: ethernet@gpmc { + reg = <5 0 0xff>; + interrupt-parent = <&gpio6>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; /* GPIO 176 */ + }; + + smsc2: ethernet@4,0 { + compatible = "smsc,lan9221","smsc,lan9115"; + bank-width = <2>; + + gpmc,mux-add-data; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <42>; + gpmc,cs-wr-off-ns = <36>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <12>; + gpmc,adv-wr-off-ns = <12>; + gpmc,oe-on-ns = <0>; + gpmc,oe-off-ns = <42>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <36>; + gpmc,rd-cycle-ns = <60>; + gpmc,wr-cycle-ns = <54>; + gpmc,access-ns = <36>; + gpmc,page-burst-access-ns = <0>; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,wr-data-mux-bus-ns = <18>; + gpmc,wr-access-ns = <42>; + gpmc,cycle2cycle-samecsen; + gpmc,cycle2cycle-diffcsen; + vddvario-supply = <&vddvario>; + vdd33a-supply = <&vdd33a>; + reg-io-width = <4>; + smsc,save-mac-address; + + reg = <4 0 0xff>; + interrupt-parent = <&gpio3>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; /* GPIO 65 */ + }; +}; + +&lis33de { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/omap3-overo-tobiduo.dts b/arch/arm/boot/dts/omap3-overo-tobiduo.dts new file mode 100644 index 000000000000..b9ce310f6e82 --- /dev/null +++ b/arch/arm/boot/dts/omap3-overo-tobiduo.dts @@ -0,0 +1,21 @@ +/* + * Copyright (C) 2015 Ash Charles, Gumstix, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * TobiDuo expansion board is manufactured by Gumstix Inc. + */ + +/dts-v1/; + +#include "omap3-overo.dtsi" +#include "omap3-overo-tobiduo-common.dtsi" + +/ { + model = "OMAP35xx Gumstix Overo on TobiDuo"; + compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3"; +}; diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi index 69ca7c45bca2..932a02ff552a 100644 --- a/arch/arm/boot/dts/omap3-overo.dtsi +++ b/arch/arm/boot/dts/omap3-overo.dtsi @@ -32,7 +32,3 @@ >; }; }; - -&mcbsp2 { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/omap3-pandora-1ghz.dts b/arch/arm/boot/dts/omap3-pandora-1ghz.dts index 9619a28dfd7d..25498f756a29 100644 --- a/arch/arm/boot/dts/omap3-pandora-1ghz.dts +++ b/arch/arm/boot/dts/omap3-pandora-1ghz.dts @@ -19,7 +19,7 @@ / { model = "Pandora Handheld Console 1GHz"; - compatible = "ti,omap36xx", "ti,omap3"; + compatible = "openpandora,omap3-pandora-1ghz", "ti,omap36xx", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-pandora-600mhz.dts b/arch/arm/boot/dts/omap3-pandora-600mhz.dts index fb803a70a2bb..8775897a4ce7 100644 --- a/arch/arm/boot/dts/omap3-pandora-600mhz.dts +++ b/arch/arm/boot/dts/omap3-pandora-600mhz.dts @@ -19,7 +19,7 @@ / { model = "Pandora Handheld Console"; - compatible = "ti,omap3"; + compatible = "openpandora,omap3-pandora-600mhz", "ti,omap3430", "ti,omap3"; }; &omap3_pmx_core2 { diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi index 782ab1ff1d08..f2084e6d01e7 100644 --- a/arch/arm/boot/dts/omap3-pandora-common.dtsi +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi @@ -199,6 +199,38 @@ gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; /* GPIO_108 */ }; }; + + /* HS USB Host PHY on PORT 2 */ + hsusb2_phy: hsusb2_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; /* GPIO_16 */ + vcc-supply = <&vaux2>; + }; + + /* HS USB Host VBUS supply + * disabling this regulator causes current leakage, and LCD flicker + * on earlier (CC) board revisions, so keep it always on */ + usb_host_5v: fixed-regulator-usb_host_5v { + compatible = "regulator-fixed"; + regulator-name = "usb_host_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio6 4 0>; /* GPIO_164 */ + }; + + /* wg7210 (wifi+bt module) 32k clock buffer */ + wg7210_32k: fixed-regulator-wg7210_32k { + compatible = "regulator-fixed"; + regulator-name = "wg7210_32k"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + enable-active-high; + gpio = <&twl_gpio 13 GPIO_ACTIVE_HIGH>; + }; }; &omap3_pmx_core { @@ -459,13 +491,18 @@ power = <50>; }; +/* + * Many pandora boards have been produced with defective write-protect switches + * on either slot, so it was decided not to use this feature. If you know + * your board has good switches, feel free to uncomment wp-gpios below. + */ &mmc1 { pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; vmmc-supply = <&vmmc1>; bus-width = <4>; cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>; /* GPIO_126 */ + /*wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;*/ /* GPIO_126 */ }; &mmc2 { @@ -473,8 +510,13 @@ pinctrl-0 = <&mmc2_pins>; vmmc-supply = <&vmmc2>; bus-width = <4>; - cd-gpios = <&twl_gpio 1 GPIO_ACTIVE_HIGH>; - wp-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* GPIO_127 */ + cd-gpios = <&twl_gpio 1 GPIO_ACTIVE_LOW>; + /*wp-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;*/ /* GPIO_127 */ +}; + +/* mmc3 is probed using pdata-quirks to pass wl1251 card data */ +&mmc3 { + status = "disabled"; }; /* bluetooth*/ @@ -496,6 +538,10 @@ port2-mode = "ehci-phy"; }; +&usbhsehci { + phys = <0 &hsusb2_phy>; +}; + &gpmc { ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */ @@ -545,7 +591,7 @@ reg = <0x280000 0xa00000>; }; - filesystem@680000 { + filesystem@c80000 { label = "rootfs"; reg = <0xc80000 0>; /* 0 = MTDPART_SIZ_FULL */ }; diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 275618f19a43..3cc8f357d5b8 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -510,6 +510,13 @@ }; }; }; + + palmas_power_button: palmas_power_button { + compatible = "ti,palmas-pwrbutton"; + interrupt-parent = <&palmas>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + }; }; twl6040: twl@4b { diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index b1a1263e6001..4205a8ac9ddb 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -873,7 +873,12 @@ dwc3@4a030000 { compatible = "snps,dwc3"; reg = <0x4a030000 0x10000>; - interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "peripheral", + "host", + "otg"; phys = <&usb2_phy>, <&usb3_phy>; phy-names = "usb2-phy", "usb3-phy"; dr_mode = "peripheral"; diff --git a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts new file mode 100644 index 000000000000..3daec912b4bf --- /dev/null +++ b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts @@ -0,0 +1,273 @@ +/* + * Device Tree file for Buffalo Linkstation LS-WTGL + * + * Copyright (C) 2015, Roger Shimizu <rogershimizu@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "orion5x-mv88f5182.dtsi" + +/ { + model = "Buffalo Linkstation LS-WTGL"; + compatible = "buffalo,lswtgl", "marvell,orion5x-88f5182", "marvell,orion5x"; + + memory { /* 64 MB */ + device_type = "memory"; + reg = <0x00000000 0x4000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + linux,stdout-path = &uart0; + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>, + <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>, + <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>; + + internal-regs { + pinctrl: pinctrl@10000 { + pinctrl-0 = <&pmx_usb_power &pmx_power_hdd + &pmx_fan_low &pmx_fan_high &pmx_fan_lock>; + pinctrl-names = "default"; + + pmx_led_power: pmx-leds { + marvell,pins = "mpp0"; + marvell,function = "gpio"; + }; + + pmx_led_alarm: pmx-leds { + marvell,pins = "mpp2"; + marvell,function = "gpio"; + }; + + pmx_led_info: pmx-leds { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + + pmx_power_hdd: pmx-power-hdd { + marvell,pins = "mpp1"; + marvell,function = "gpio"; + }; + + pmx_usb_power: pmx-usb-power { + marvell,pins = "mpp9"; + marvell,function = "gpio"; + }; + + pmx_sata0: pmx-sata0 { + marvell,pins = "mpp12"; + marvell,function = "sata0"; + }; + + pmx_sata1: pmx-sata1 { + marvell,pins = "mpp13"; + marvell,function = "sata1"; + }; + + pmx_fan_high: pmx-fan-high { + marvell,pins = "mpp14"; + marvell,function = "gpio"; + }; + + pmx_fan_low: pmx-fan-low { + marvell,pins = "mpp17"; + marvell,function = "gpio"; + }; + + pmx_fan_lock: pmx-fan-lock { + marvell,pins = "mpp6"; + marvell,function = "gpio"; + }; + + pmx_power_switch: pmx-power-switch { + marvell,pins = "mpp8", "mpp10"; + marvell,function = "gpio"; + }; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_power_switch>; + pinctrl-names = "default"; + + button@1 { + label = "Power-on Switch"; + linux,code = <KEY_RESERVED>; + linux,input-type = <5>; + gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; + }; + + button@2 { + label = "Power-auto Switch"; + linux,code = <KEY_ESC>; + linux,input-type = <5>; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_power &pmx_led_alarm + &pmx_led_info>; + pinctrl-names = "default"; + + led@1 { + label = "lswtgl:blue:power"; + gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + }; + + led@2 { + label = "lswtgl:red:alarm"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + }; + + led@3 { + label = "lswtgl:amber:info"; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_fan { + compatible = "gpio-fan"; + pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>; + pinctrl-names = "default"; + + gpios = <&gpio0 14 GPIO_ACTIVE_LOW + &gpio0 17 GPIO_ACTIVE_LOW>; + + gpio-fan,speed-map = <0 3 + 1500 2 + 3250 1 + 5000 0>; + + alarm-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; + }; + + restart_poweroff { + compatible = "restart-poweroff"; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_power_hdd &pmx_usb_power>; + pinctrl-names = "default"; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; + }; + + hdd_power: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "HDD Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy: ethernet-phy { + reg = <8>; + }; +}; + +ð { + status = "okay"; + + ethernet-port@0 { + phy-handle = <ðphy>; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c { + status = "okay"; + + rtc { + compatible = "ricoh,rs5c372a"; + reg = <0x32>; + }; +}; + +&wdt { + status = "disabled"; +}; + +&sata { + pinctrl-0 = <&pmx_sata0 &pmx_sata1>; + pinctrl-names = "default"; + status = "okay"; + nr-ports = <2>; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/orion5x-lswsgl.dts b/arch/arm/boot/dts/orion5x-lswsgl.dts new file mode 100644 index 000000000000..6b47a52ceb9c --- /dev/null +++ b/arch/arm/boot/dts/orion5x-lswsgl.dts @@ -0,0 +1,276 @@ +/* + * Copyright (C) 2015 Benjamin Cama <benoar@dolka.fr> + * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * Based on the board file arch/arm/mach-orion5x/lsmini-setup.c, + * Copyright (C) 2008 Alexey Kopytko <alexey@kopytko.ru> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "orion5x-mv88f5182.dtsi" + +/ { + model = "Buffalo Linkstation Mini (LS-WSGL)"; + compatible = "buffalo,lswsgl", "marvell,orion5x-88f5182", "marvell,orion5x"; + + memory { + reg = <0x00000000 0x8000000>; /* 128 MB */ + }; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + linux,stdout-path = &uart0; + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>, + <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>, + <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&pmx_buttons>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + func { + label = "Function Button"; + linux,code = <KEY_OPTION>; + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + }; + + power { + label = "Power-on Switch"; + linux,input-type = <5>; /* EV_SW */ + linux,code = <KEY_RESERVED>; /* LSMINI_SW_POWER */ + gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; + }; + + autopower { + label = "Power-auto Switch"; + linux,input-type = <5>; /* EV_SW */ + linux,code = <KEY_ESC>; /* LSMINI_SW_AUTOPOWER */ + gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_alarm &pmx_led_info &pmx_led_func + &pmx_led_power>; + pinctrl-names = "default"; + + alarm { + label = "lswsgl:alarm:red"; + gpio = <&gpio0 2 GPIO_ACTIVE_LOW>; + }; + + info { + label = "lswsgl:info:amber"; + gpio = <&gpio0 3 GPIO_ACTIVE_LOW>; + }; + + func { + label = "lswsgl:func:blue:top"; + gpio = <&gpio0 9 GPIO_ACTIVE_LOW>; + }; + + power { + label = "lswsgl:power:blue:bottom"; + gpio = <&gpio0 14 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + }; + + restart_poweroff { + compatible = "restart-poweroff"; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_sata0_power &pmx_sata1_power &pmx_usb_power>; + pinctrl-names = "default"; + + sata0_power: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "SATA0 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 1 GPIO_ACTIVE_HIGH>; + }; + + sata1_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "SATA1 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 19 GPIO_ACTIVE_HIGH>; + }; + + usb_power: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&devbus_bootcs { + status = "okay"; + + devbus,keep-config; + + flash@0 { + compatible = "cfi-flash"; + reg = <0 0x40000>; + bank-width = <1>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Full256Kb"; + reg = <0 0x40000>; + read-only; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy: ethernet-phy { + reg = <8>; + }; +}; + +&ehci0 { + status = "okay"; +}; + +ð { + status = "okay"; + + ethernet-port@0 { + phy-handle = <ðphy>; + }; +}; + +&i2c { + status = "okay"; + clock-frequency = <100000>; + #address-cells = <1>; + + rtc@32 { + compatible = "ricoh,rs5c372a"; + reg = <0x32>; + }; +}; + +&pinctrl { + pmx_buttons: pmx-buttons { + marvell,pins = "mpp15", "mpp17", "mpp18"; + marvell,function = "gpio"; + }; + + pmx_led_alarm: pmx-leds { + marvell,pins = "mpp2"; + marvell,function = "gpio"; + }; + + pmx_led_info: pmx-leds { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + + pmx_led_func: pmx-leds { + marvell,pins = "mpp9"; + marvell,function = "gpio"; + }; + + pmx_led_power: pmx-leds { + marvell,pins = "mpp14"; + marvell,function = "gpio"; + }; + + pmx_sata0_power: pmx-sata0-power { + marvell,pins = "mpp1"; + marvell,function = "gpio"; + }; + + pmx_sata1_power: pmx-sata1-power { + marvell,pins = "mpp19"; + marvell,function = "gpio"; + }; + + pmx_usb_power: pmx-usb-power { + marvell,pins = "mpp16"; + marvell,function = "gpio"; + }; +}; + +&sata { + status = "okay"; + nr-ports = <2>; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi index 90b99714ad80..7f68a1ee7073 100644 --- a/arch/arm/boot/dts/pxa27x.dtsi +++ b/arch/arm/boot/dts/pxa27x.dtsi @@ -7,6 +7,15 @@ compatible = "marvell,pxa27x"; pxabus { + pdma: dma-controller@40000000 { + compatible = "marvell,pdma-1.0"; + reg = <0x40000000 0x10000>; + interrupts = <25>; + #dma-channels = <32>; + #dma-cells = <2>; + status = "okay"; + }; + pxairq: interrupt-controller@40d00000 { marvell,intc-priority; marvell,intc-nr-irqs = <34>; @@ -17,6 +26,14 @@ clocks = <&clks CLK_NONE>; }; + pxa27x_ohci: usb@4c000000 { + compatible = "marvell,pxa-ohci"; + reg = <0x4c000000 0x10000>; + interrupts = <3>; + clocks = <&clks CLK_USBHOST>; + status = "disabled"; + }; + pwm0: pwm@40b00000 { compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm"; reg = <0x40b00000 0x10>; @@ -50,6 +67,8 @@ reg = <0x40f00180 0x24>; interrupts = <6>; clocks = <&clks CLK_PWRI2C>; + #address-cells = <0x1>; + #size-cells = <0>; status = "disabled"; }; @@ -68,6 +87,23 @@ clocks = <&clks CLK_KEYPAD>; status = "disabled"; }; + + pxa_camera: imaging@50000000 { + compatible = "marvell,pxa270-qci"; + reg = <0x50000000 0x1000>; + interrupts = <33>; + dmas = <&pdma 68 0 /* Y channel */ + &pdma 69 0 /* U channel */ + &pdma 70 0>; /* V channel */ + dma-names = "CI_Y", "CI_U", "CI_V"; + + clocks = <&clks CLK_CAMERA>; + clock-names = "ciclk"; + clock-frequency = <5000000>; + clock-output-names = "qci_mclk"; + + status = "disabled"; + }; }; clocks { diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi index 71a0cd7388d1..5e5af078b9b5 100644 --- a/arch/arm/boot/dts/pxa2xx.dtsi +++ b/arch/arm/boot/dts/pxa2xx.dtsi @@ -128,6 +128,10 @@ compatible = "marvell,pxa-mmc"; reg = <0x41100000 0x1000>; interrupts = <23>; + clocks = <&clks CLK_MMC>; + dmas = <&pdma 21 3 + &pdma 22 3>; + dma-names = "rx", "tx"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi index 7ad0b1771098..cf6998a0804d 100644 --- a/arch/arm/boot/dts/pxa3xx.dtsi +++ b/arch/arm/boot/dts/pxa3xx.dtsi @@ -6,6 +6,15 @@ compatible = "marvell,pxa3xx"; pxabus { + pdma: dma-controller@40000000 { + compatible = "marvell,pdma-1.0"; + reg = <0x40000000 0x10000>; + interrupts = <25>; + #dma-channels = <32>; + #dma-cells = <2>; + status = "okay"; + }; + pwri2c: i2c@40f500c0 { compatible = "mrvl,pwri2c"; reg = <0x40f500c0 0x30>; @@ -21,6 +30,8 @@ reg = <0x43100000 90>; interrupts = <45>; clocks = <&clks CLK_NAND>; + dmas = <&pdma 97>; + dma-names = "data"; #address-cells = <1>; #size-cells = <1>; status = "disabled"; @@ -42,6 +53,47 @@ interrupt-controller; #interrupt-cells = <0x2>; }; + + mmc0: mmc@41100000 { + compatible = "marvell,pxa-mmc"; + reg = <0x41100000 0x1000>; + interrupts = <23>; + clocks = <&clks CLK_MMC>; + dmas = <&pdma 21 3 + &pdma 22 3>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + mmc1: mmc@42000000 { + compatible = "marvell,pxa-mmc"; + reg = <0x42000000 0x1000>; + interrupts = <41>; + clocks = <&clks CLK_MMC1>; + dmas = <&pdma 93 3 + &pdma 94 3>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + mmc2: mmc@42500000 { + compatible = "marvell,pxa-mmc"; + reg = <0x42500000 0x1000>; + interrupts = <55>; + clocks = <&clks CLK_MMC2>; + dmas = <&pdma 46 3 + &pdma 47 3>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + pxa3xx_ohci: usb@4c000000 { + compatible = "marvell,pxa-ohci"; + reg = <0x4c000000 0x10000>; + interrupts = <3>; + clocks = <&clks CLK_USBHOST>; + status = "disabled"; + }; }; clocks { diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts index 71512b3ca444..34ccb260f12a 100644 --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -67,6 +67,12 @@ bias-pull-down; }; + pm8921_l5: l5 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + pm8921_l23: l23 { regulator-min-microvolt = <1700000>; regulator-max-microvolt = <1900000>; @@ -140,19 +146,33 @@ status = "okay"; }; + /* on board fixed 3.3v supply */ + v3p3_fixed: v3p3 { + compatible = "regulator-fixed"; + regulator-name = "PCIE V3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + amba { /* eMMC */ sdcc1: sdcc@12400000 { status = "okay"; + vmmc-supply = <&pm8921_l5>; + vqmmc-supply = <&pm8921_s4>; }; /* External micro SD card */ sdcc3: sdcc@12180000 { status = "okay"; + vmmc-supply = <&v3p3_fixed>; }; /* WLAN */ sdcc4: sdcc@121c0000 { status = "okay"; + vmmc-supply = <&v3p3_fixed>; + vqmmc-supply = <&v3p3_fixed>; }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index a7c939ba8873..88d6655ddaf6 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -7,6 +7,7 @@ aliases { serial0 = &gsbi7_serial; + serial1 = &gsbi6_serial; }; soc { @@ -73,6 +74,12 @@ bias-pull-down; }; + pm8921_l5: l5 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + pm8921_l6: l6 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; @@ -84,9 +91,25 @@ regulator-max-microvolt = <1900000>; bias-pull-down; }; + + pm8921_lvs1: lvs1 { + bias-pull-down; + }; }; }; + ext_3p3v: regulator-fixed@1 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "ext_3p3v"; + regulator-type = "voltage"; + startup-delay-us = <0>; + gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; + gsbi3: gsbi@16200000 { status = "okay"; qcom,mode = <GSBI_PROT_I2C>; @@ -115,6 +138,18 @@ }; }; + gsbi@16500000 { + status = "ok"; + qcom,mode = <GSBI_PROT_I2C_UART>; + + serial@16540000 { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&uart_pins>; + }; + }; + gsbi@16600000 { status = "ok"; qcom,mode = <GSBI_PROT_I2C_UART>; @@ -175,11 +210,14 @@ /* eMMC */ sdcc1: sdcc@12400000 { status = "okay"; + vmmc-supply = <&pm8921_l5>; + vqmmc-supply = <&pm8921_s4>; }; /* External micro SD card */ sdcc3: sdcc@12180000 { status = "okay"; + vmmc-supply = <&pm8921_l6>; pinctrl-names = "default"; pinctrl-0 = <&card_detect>; cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; @@ -187,6 +225,8 @@ /* WLAN */ sdcc4: sdcc@121c0000 { status = "okay"; + vmmc-supply = <&ext_3p3v>; + vqmmc-supply = <&pm8921_lvs1>; }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index df2061ec630d..d2e94d647c27 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -6,7 +6,6 @@ #include <dt-bindings/clock/qcom,mmcc-msm8960.h> #include <dt-bindings/soc/qcom,gsbi.h> #include <dt-bindings/interrupt-controller/arm-gic.h> - / { model = "Qualcomm APQ8064"; compatible = "qcom,apq8064"; @@ -127,6 +126,13 @@ function = "gsbi3"; }; }; + + uart_pins: uart_pins { + mux { + pins = "gpio14", "gpio15", "gpio16", "gpio17"; + function = "gsbi6"; + }; + }; }; intc: interrupt-controller@2000000 { @@ -243,13 +249,13 @@ gsbi3: gsbi@16200000 { status = "disabled"; compatible = "qcom,gsbi-v1.0.0"; + cell-index = <3>; reg = <0x16200000 0x100>; clocks = <&gcc GSBI3_H_CLK>; clock-names = "iface"; #address-cells = <1>; #size-cells = <1>; ranges; - i2c3: i2c@16280000 { compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x16280000 0x1000>; @@ -260,6 +266,28 @@ }; }; + gsbi6: gsbi@16500000 { + status = "disabled"; + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <6>; + reg = <0x16500000 0x03>; + clocks = <&gcc GSBI6_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gsbi6_serial: serial@16540000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16540000 0x100>, + <0x16500000 0x03>; + interrupts = <0 156 0x0>; + clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; + gsbi7: gsbi@16600000 { status = "disabled"; compatible = "qcom,gsbi-v1.0.0"; @@ -287,6 +315,53 @@ compatible = "qcom,ssbi"; reg = <0x00500000 0x1000>; qcom,controller-type = "pmic-arbiter"; + + pmicintc: pmic@0 { + compatible = "qcom,pm8921"; + interrupt-parent = <&tlmm_pinmux>; + interrupts = <74 8>; + #interrupt-cells = <2>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + + pm8921_gpio: gpio@150 { + + compatible = "qcom,pm8921-gpio"; + reg = <0x150>; + interrupts = <192 1>, <193 1>, <194 1>, + <195 1>, <196 1>, <197 1>, + <198 1>, <199 1>, <200 1>, + <201 1>, <202 1>, <203 1>, + <204 1>, <205 1>, <206 1>, + <207 1>, <208 1>, <209 1>, + <210 1>, <211 1>, <212 1>, + <213 1>, <214 1>, <215 1>, + <216 1>, <217 1>, <218 1>, + <219 1>, <220 1>, <221 1>, + <222 1>, <223 1>, <224 1>, + <225 1>, <226 1>, <227 1>, + <228 1>, <229 1>, <230 1>, + <231 1>, <232 1>, <233 1>, + <234 1>, <235 1>; + + gpio-controller; + #gpio-cells = <2>; + + }; + + pm8921_mpps: mpps@50 { + compatible = "qcom,pm8921-mpp"; + reg = <0x50>; + gpio-controller; + #gpio-cells = <2>; + interrupts = + <128 1>, <129 1>, <130 1>, <131 1>, + <132 1>, <133 1>, <134 1>, <135 1>, + <136 1>, <137 1>, <138 1>, <139 1>; + }; + + }; }; gcc: clock-controller@900000 { @@ -448,14 +523,6 @@ }; /* Temporary fixed regulator */ - vsdcc_fixed: vsdcc-regulator { - compatible = "regulator-fixed"; - regulator-name = "SDCC Power"; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - regulator-always-on; - }; - sdcc1bam:dma@12402000{ compatible = "qcom,bam-v1.3.0"; reg = <0x12402000 0x8000>; @@ -505,7 +572,6 @@ non-removable; cap-sd-highspeed; cap-mmc-highspeed; - vmmc-supply = <&vsdcc_fixed>; dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; dma-names = "tx", "rx"; }; @@ -524,7 +590,6 @@ cap-mmc-highspeed; max-frequency = <192000000>; no-1-8-v; - vmmc-supply = <&vsdcc_fixed>; dmas = <&sdcc3bam 2>, <&sdcc3bam 1>; dma-names = "tx", "rx"; }; @@ -542,8 +607,6 @@ cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <48000000>; - vmmc-supply = <&vsdcc_fixed>; - vqmmc-supply = <&vsdcc_fixed>; dmas = <&sdcc4bam 2>, <&sdcc4bam 1>; dma-names = "tx", "rx"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index e0b2ce2910e0..ef2fe72b54c9 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -67,15 +67,16 @@ cpu-offset = <0x40000>; }; - msmgpio: gpio@800000 { - compatible = "qcom,msm-gpio"; - reg = <0x00800000 0x4000>; + tlmm: pinctrl@800000 { + compatible = "qcom,msm8660-pinctrl"; + reg = <0x800000 0x4000>; + gpio-controller; #gpio-cells = <2>; - ngpio = <173>; interrupts = <0 16 0x4>; interrupt-controller; #interrupt-cells = <2>; + }; gcc: clock-controller@900000 { @@ -115,7 +116,7 @@ pmicintc: pmic@0 { compatible = "qcom,pm8058"; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <88 8>; #interrupt-cells = <2>; interrupt-controller; diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts index 7f70fae90959..fad71d5527b0 100644 --- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts +++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts @@ -26,6 +26,308 @@ status = "okay"; }; }; + + rpm@108000 { + regulators { + compatible = "qcom,rpm-pm8921-regulators"; + vin_lvs1_3_6-supply = <&pm8921_s4>; + vin_lvs2-supply = <&pm8921_s4>; + vin_lvs4_5_7-supply = <&pm8921_s4>; + vdd_ncp-supply = <&pm8921_l6>; + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + vdd_l21_l23_l29-supply = <&pm8921_s8>; + vdd_l24-supply = <&pm8921_s1>; + vdd_l25-supply = <&pm8921_s1>; + vdd_l27-supply = <&pm8921_s7>; + vdd_l28-supply = <&pm8921_s7>; + + /* Buck SMPS */ + pm8921_s1: s1 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + pm8921_s2: s2 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + pm8921_s3: s3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1150000>; + qcom,switch-mode-frequency = <4800000>; + bias-pull-down; + }; + + pm8921_s4: s4 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; + }; + + pm8921_s7: s7 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + pm8921_s8: s8 { + regulator-always-on; + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + /* PMOS LDO */ + pm8921_l1: l1 { + regulator-always-on; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + bias-pull-down; + }; + + pm8921_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + pm8921_l3: l3 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + bias-pull-down; + }; + + pm8921_l4: l4 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8921_l5: l5 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l6: l6 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l7: l7 { + regulator-always-on; + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l8: l8 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + pm8921_l9: l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + pm8921_l10: l10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + pm8921_l11: l11 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + + pm8921_l12: l12 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + pm8921_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8921_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l16: l16 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + bias-pull-down; + }; + + pm8921_l17: l17 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l18: l18 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + bias-pull-down; + }; + + pm8921_l21: l21 { + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <1900000>; + bias-pull-down; + }; + + pm8921_l22: l22 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + bias-pull-down; + }; + + pm8921_l23: l23 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8921_l24: l24 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1150000>; + bias-pull-down; + }; + + pm8921_l25: l25 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + bias-pull-down; + }; + + /* Low Voltage Switch */ + pm8921_lvs1: lvs1 { + bias-pull-down; + }; + + pm8921_lvs2: lvs2 { + bias-pull-down; + }; + + pm8921_lvs3: lvs3 { + bias-pull-down; + }; + + pm8921_lvs4: lvs4 { + bias-pull-down; + }; + + pm8921_lvs5: lvs5 { + bias-pull-down; + }; + + pm8921_lvs6: lvs6 { + bias-pull-down; + }; + + pm8921_lvs7: lvs7 { + bias-pull-down; + }; + + pm8921_ncp: ncp { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + }; + }; + }; + + gsbi@16000000 { + status = "ok"; + qcom,mode = <GSBI_PROT_SPI>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_default>; + spi@16080000 { + status = "ok"; + eth@0 { + compatible = "micrel,ks8851"; + reg = <0>; + interrupt-parent = <&msmgpio>; + interrupts = <90 8>; + spi-max-frequency = <5400000>; + vdd-supply = <&ext_l2>; + vdd-io-supply = <&pm8921_lvs6>; + reset-gpios = <&msmgpio 89 0>; + }; + }; + }; + + pinctrl@800000 { + spi1_default: spi1_default { + mux { + pins = "gpio6", "gpio7", "gpio9"; + function = "gsbi1"; + }; + + mosi { + pins = "gpio6"; + drive-strength = <12>; + bias-disable; + }; + + miso { + pins = "gpio7"; + drive-strength = <12>; + bias-disable; + }; + + cs { + pins = "gpio8"; + drive-strength = <12>; + bias-disable; + output-low; + }; + + clk { + pins = "gpio9"; + drive-strength = <12>; + bias-disable; + }; + }; + }; + }; + + regulators { + compatible = "simple-bus"; + + ext_l2: gpio-regulator@91 { + compatible = "regulator-fixed"; + regulator-name = "ext_l2"; + gpio = <&msmgpio 91 0>; + startup-delay-us = <10000>; + enable-active-high; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index a02b984cc68d..2096a94c9b52 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -4,6 +4,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8960.h> +#include <dt-bindings/mfd/qcom-rpm.h> #include <dt-bindings/soc/qcom,gsbi.h> / { @@ -73,11 +74,10 @@ cpu-offset = <0x80000>; }; - msmgpio: gpio@800000 { - compatible = "qcom,msm-gpio"; + msmgpio: pinctrl@800000 { + compatible = "qcom,msm8960-pinctrl"; gpio-controller; #gpio-cells = <2>; - ngpio = <150>; interrupts = <0 16 0x4>; interrupt-controller; #interrupt-cells = <2>; @@ -105,6 +105,24 @@ #reset-cells = <1>; }; + l2cc: clock-controller@2011000 { + compatible = "syscon"; + reg = <0x2011000 0x1000>; + }; + + rpm@108000 { + compatible = "qcom,rpm-msm8960"; + reg = <0x108000 0x1000>; + qcom,ipc = <&l2cc 0x8 2>; + + interrupts = <0 19 0>, <0 21 0>, <0 22 0>; + interrupt-names = "ack", "err", "wakeup"; + + regulators { + compatible = "qcom,rpm-pm8921-regulators"; + }; + }; + acc0: clock-controller@2088000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02088000 0x1000>, <0x02008000 0x1000>; @@ -253,5 +271,30 @@ compatible = "qcom,tcsr-msm8960", "syscon"; reg = <0x1a400000 0x100>; }; + + gsbi@16000000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <1>; + reg = <0x16000000 0x100>; + clocks = <&gcc GSBI1_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + spi@16080000 { + compatible = "qcom,spi-qup-v1.1.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x16080000 0x1000>; + interrupts = <0 147 0>; + spi-max-frequency = <24000000>; + cs-gpios = <&msmgpio 8 0>; + + clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 37b47b5538b8..d7c99b894a49 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -9,6 +9,17 @@ compatible = "qcom,msm8974"; interrupt-parent = <&intc>; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + smem_region: smem@fa00000 { + reg = <0xfa00000 0x200000>; + no-map; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -220,6 +231,11 @@ reg = <0xfc400000 0x4000>; }; + tcsr_mutex_block: syscon@fd484000 { + compatible = "syscon"; + reg = <0xfd484000 0x2000>; + }; + mmcc: clock-controller@fd8c0000 { compatible = "qcom,mmcc-msm8974"; #clock-cells = <1>; @@ -227,6 +243,22 @@ reg = <0xfd8c0000 0x6000>; }; + tcsr_mutex: tcsr-mutex { + compatible = "qcom,tcsr-mutex"; + syscon = <&tcsr_mutex_block 0 0x80>; + + #hwlock-cells = <1>; + }; + + smem@fa00000 { + compatible = "qcom,smem"; + + memory-region = <&smem_region>; + reg = <0xfc428000 0x4000>; + + hwlocks = <&tcsr_mutex 3>; + }; + serial@f991e000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf991e000 0x1000>; diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi index 277e73c110e5..060c32cbd669 100644 --- a/arch/arm/boot/dts/r7s72100.dtsi +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -86,6 +86,7 @@ reg = <0xfcfe0000 0x18>; clocks = <&extal_clk>, <&usb_x1_clk>; clock-output-names = "pll", "i", "g"; + #power-domain-cells = <0>; }; /* MSTP clocks */ @@ -157,6 +158,7 @@ <0 189 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF0>; clock-names = "sci_ick"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -169,6 +171,7 @@ <0 193 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF1>; clock-names = "sci_ick"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -181,6 +184,7 @@ <0 197 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF2>; clock-names = "sci_ick"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -193,6 +197,7 @@ <0 201 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF3>; clock-names = "sci_ick"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -205,6 +210,7 @@ <0 205 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF4>; clock-names = "sci_ick"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -217,6 +223,7 @@ <0 209 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF5>; clock-names = "sci_ick"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -229,6 +236,7 @@ <0 213 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF6>; clock-names = "sci_ick"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -241,6 +249,7 @@ <0 217 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R7S72100_CLK_SCIF7>; clock-names = "sci_ick"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -252,6 +261,7 @@ <0 240 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; clocks = <&mstp10_clks R7S72100_CLK_SPI0>; + power-domains = <&cpg_clocks>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -266,6 +276,7 @@ <0 243 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; clocks = <&mstp10_clks R7S72100_CLK_SPI1>; + power-domains = <&cpg_clocks>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -280,6 +291,7 @@ <0 246 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; clocks = <&mstp10_clks R7S72100_CLK_SPI2>; + power-domains = <&cpg_clocks>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -294,6 +306,7 @@ <0 249 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; clocks = <&mstp10_clks R7S72100_CLK_SPI3>; + power-domains = <&cpg_clocks>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -308,6 +321,7 @@ <0 252 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; clocks = <&mstp10_clks R7S72100_CLK_SPI4>; + power-domains = <&cpg_clocks>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -338,6 +352,7 @@ <0 164 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R7S72100_CLK_I2C0>; clock-frequency = <100000>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -356,6 +371,7 @@ <0 172 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R7S72100_CLK_I2C1>; clock-frequency = <100000>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -374,6 +390,7 @@ <0 180 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R7S72100_CLK_I2C2>; clock-frequency = <100000>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -392,6 +409,7 @@ <0 188 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R7S72100_CLK_I2C3>; clock-frequency = <100000>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -402,6 +420,7 @@ interrupt-names = "tgi0a"; clocks = <&mstp3_clks R7S72100_CLK_MTU2>; clock-names = "fck"; + power-domains = <&cpg_clocks>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 7ee22a41c6c9..cb4f7b2798fe 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -207,6 +207,13 @@ reg = <0 0xe6050000 0 0x9000>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = + <&pfc 0 0 31>, <&pfc 32 32 9>, + <&pfc 64 64 22>, <&pfc 96 96 31>, + <&pfc 128 128 7>, <&pfc 160 160 19>, + <&pfc 192 192 31>, <&pfc 224 224 27>, + <&pfc 256 256 28>, <&pfc 288 288 21>, + <&pfc 320 320 10>; interrupts-extended = <&irqc0 0 0>, <&irqc0 1 0>, <&irqc0 2 0>, <&irqc0 3 0>, <&irqc0 4 0>, <&irqc0 5 0>, <&irqc0 6 0>, <&irqc0 7 0>, @@ -434,7 +441,7 @@ }; gic: interrupt-controller@f1001000 { - compatible = "arm,cortex-a15-gic"; + compatible = "arm,gic-400"; #interrupt-cells = <3>; #address-cells = <0>; interrupt-controller; diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index 2e31d8c01cbf..105d9c95de4a 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -224,6 +224,9 @@ }; &pfc { + pinctrl-0 = <&lcd0_pins>; + pinctrl-names = "default"; + ether_pins: ether { renesas,groups = "gether_mii", "gether_int"; renesas,function = "gether"; @@ -259,6 +262,16 @@ "fsia_data_in_1", "fsia_data_out_0"; renesas,function = "fsia"; }; + + lcd0_pins: lcd0 { + renesas,groups = "lcd0_data24_0", "lcd0_lclk_1", "lcd0_sync"; + renesas,function = "lcd0"; + + /* DBGMD/LCDC0/FSIA MUX */ + gpio-hog; + gpios = <176 0>; + output-high; + }; }; &tpu { diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index d84714468cce..e14cb1438216 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -291,6 +291,7 @@ <0xe605800c 0x20>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pfc 0 0 212>; interrupts-extended = <&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>, <&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>, diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 7ce9f5fd5865..4b1fa9f42ad5 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -53,6 +53,7 @@ reg = <0xfde00000 0x400>; interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7778_CLK_ETHER>; + power-domains = <&cpg_clocks>; phy-mode = "rmii"; #address-cells = <1>; #size-cells = <0>; @@ -152,6 +153,7 @@ reg = <0xffc70000 0x1000>; interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_I2C0>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -162,6 +164,7 @@ reg = <0xffc71000 0x1000>; interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_I2C1>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -172,6 +175,7 @@ reg = <0xffc72000 0x1000>; interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_I2C2>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -182,6 +186,7 @@ reg = <0xffc73000 0x1000>; interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_I2C3>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -193,6 +198,7 @@ <0 34 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_TMU0>; clock-names = "fck"; + power-domains = <&cpg_clocks>; #renesas,channels = <3>; @@ -207,6 +213,7 @@ <0 38 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_TMU1>; clock-names = "fck"; + power-domains = <&cpg_clocks>; #renesas,channels = <3>; @@ -221,6 +228,7 @@ <0 42 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_TMU2>; clock-names = "fck"; + power-domains = <&cpg_clocks>; #renesas,channels = <3>; @@ -288,6 +296,7 @@ interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_SCIF0>; clock-names = "sci_ick"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -297,6 +306,7 @@ interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_SCIF1>; clock-names = "sci_ick"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -306,6 +316,7 @@ interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_SCIF2>; clock-names = "sci_ick"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -315,6 +326,7 @@ interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_SCIF3>; clock-names = "sci_ick"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -324,6 +336,7 @@ interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_SCIF4>; clock-names = "sci_ick"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -333,6 +346,7 @@ interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_SCIF5>; clock-names = "sci_ick"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -341,6 +355,7 @@ reg = <0xffe4e000 0x100>; interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7778_CLK_MMC>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -349,6 +364,7 @@ reg = <0xffe4c000 0x100>; interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7778_CLK_SDHI0>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -357,6 +373,7 @@ reg = <0xffe4d000 0x100>; interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7778_CLK_SDHI1>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -365,6 +382,7 @@ reg = <0xffe4f000 0x100>; interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7778_CLK_SDHI2>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -373,6 +391,7 @@ reg = <0xfffc7000 0x18>; interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_HSPI>; + power-domains = <&cpg_clocks>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -383,6 +402,7 @@ reg = <0xfffc8000 0x18>; interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_HSPI>; + power-domains = <&cpg_clocks>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -393,6 +413,7 @@ reg = <0xfffc6000 0x18>; interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7778_CLK_HSPI>; + power-domains = <&cpg_clocks>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -419,6 +440,7 @@ clocks = <&extal_clk>; clock-output-names = "plla", "pllb", "b", "out", "p", "s", "s1"; + #power-domain-cells = <0>; }; /* Audio clocks; frequencies are set by boards if applicable. */ diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index 5c8071e87ae9..6afa909865b5 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -148,7 +148,7 @@ interrupt-controller; }; - irqpin0: interrupt-controller@fe780010 { + irqpin0: interrupt-controller@fe78001c { compatible = "renesas,intc-irqpin-r8a7779", "renesas,intc-irqpin"; #interrupt-cells = <2>; status = "disabled"; @@ -157,7 +157,8 @@ <0xfe780010 4>, <0xfe780024 4>, <0xfe780044 4>, - <0xfe780064 4>; + <0xfe780064 4>, + <0xfe780000 4>; interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH 0 28 IRQ_TYPE_LEVEL_HIGH 0 29 IRQ_TYPE_LEVEL_HIGH @@ -172,6 +173,7 @@ reg = <0xffc70000 0x1000>; interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_I2C0>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -182,6 +184,7 @@ reg = <0xffc71000 0x1000>; interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_I2C1>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -192,6 +195,7 @@ reg = <0xffc72000 0x1000>; interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_I2C2>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -202,6 +206,7 @@ reg = <0xffc73000 0x1000>; interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_I2C3>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -211,6 +216,7 @@ interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_SCIF0>; clock-names = "sci_ick"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -220,6 +226,7 @@ interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_SCIF1>; clock-names = "sci_ick"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -229,6 +236,7 @@ interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_SCIF2>; clock-names = "sci_ick"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -238,6 +246,7 @@ interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_SCIF3>; clock-names = "sci_ick"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -247,6 +256,7 @@ interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_SCIF4>; clock-names = "sci_ick"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -256,6 +266,7 @@ interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_SCIF5>; clock-names = "sci_ick"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -277,6 +288,7 @@ <0 34 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_TMU0>; clock-names = "fck"; + power-domains = <&cpg_clocks>; #renesas,channels = <3>; @@ -291,6 +303,7 @@ <0 38 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_TMU1>; clock-names = "fck"; + power-domains = <&cpg_clocks>; #renesas,channels = <3>; @@ -305,6 +318,7 @@ <0 42 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7779_CLK_TMU2>; clock-names = "fck"; + power-domains = <&cpg_clocks>; #renesas,channels = <3>; @@ -316,6 +330,7 @@ reg = <0xfc600000 0x2000>; interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7779_CLK_SATA>; + power-domains = <&cpg_clocks>; }; sdhi0: sd@ffe4c000 { @@ -323,6 +338,7 @@ reg = <0xffe4c000 0x100>; interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7779_CLK_SDHI0>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -331,6 +347,7 @@ reg = <0xffe4d000 0x100>; interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7779_CLK_SDHI1>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -339,6 +356,7 @@ reg = <0xffe4e000 0x100>; interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7779_CLK_SDHI2>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -347,6 +365,7 @@ reg = <0xffe4f000 0x100>; interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7779_CLK_SDHI3>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -357,6 +376,7 @@ #address-cells = <1>; #size-cells = <0>; clocks = <&mstp0_clks R8A7779_CLK_HSPI>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -367,6 +387,7 @@ #address-cells = <1>; #size-cells = <0>; clocks = <&mstp0_clks R8A7779_CLK_HSPI>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -377,6 +398,7 @@ #address-cells = <1>; #size-cells = <0>; clocks = <&mstp0_clks R8A7779_CLK_HSPI>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -385,6 +407,7 @@ reg = <0 0xfff80000 0 0x40000>; interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7779_CLK_DU>; + power-domains = <&cpg_clocks>; status = "disabled"; ports { @@ -426,6 +449,7 @@ #clock-cells = <1>; clock-output-names = "plla", "z", "zs", "s", "s1", "p", "b", "out"; + #power-domain-cells = <0>; }; /* Fixed factor clocks */ diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 2eb8a995ae9f..37dec5269491 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -174,7 +174,7 @@ 1800000 0>; }; - sound { + rsnd_ak4643: sound { compatible = "simple-audio-card"; simple-audio-card,format = "left_j"; @@ -548,7 +548,7 @@ compatible = "adi,adv7511w"; reg = <0x39>; interrupt-parent = <&gpio1>; - interrupts = <15 IRQ_TYPE_EDGE_FALLING>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; adi,input-depth = <8>; adi,input-colorspace = "rgb"; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 51ab8865ea37..a0b2a79cbfbd 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -113,7 +113,7 @@ }; gic: interrupt-controller@f1001000 { - compatible = "arm,cortex-a15-gic"; + compatible = "arm,gic-400"; #interrupt-cells = <3>; #address-cells = <0>; interrupt-controller; @@ -134,6 +134,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7790_CLK_GPIO0>; + power-domains = <&cpg_clocks>; }; gpio1: gpio@e6051000 { @@ -146,6 +147,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7790_CLK_GPIO1>; + power-domains = <&cpg_clocks>; }; gpio2: gpio@e6052000 { @@ -158,6 +160,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7790_CLK_GPIO2>; + power-domains = <&cpg_clocks>; }; gpio3: gpio@e6053000 { @@ -170,6 +173,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7790_CLK_GPIO3>; + power-domains = <&cpg_clocks>; }; gpio4: gpio@e6054000 { @@ -182,6 +186,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7790_CLK_GPIO4>; + power-domains = <&cpg_clocks>; }; gpio5: gpio@e6055000 { @@ -194,6 +199,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7790_CLK_GPIO5>; + power-domains = <&cpg_clocks>; }; thermal@e61f0000 { @@ -201,6 +207,7 @@ reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp5_clks R8A7790_CLK_THERMAL>; + power-domains = <&cpg_clocks>; }; timer { @@ -218,6 +225,7 @@ <0 143 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_CMT0>; clock-names = "fck"; + power-domains = <&cpg_clocks>; renesas,channels-mask = <0x60>; @@ -237,6 +245,7 @@ <0 127 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_CMT1>; clock-names = "fck"; + power-domains = <&cpg_clocks>; renesas,channels-mask = <0xff>; @@ -253,6 +262,7 @@ <0 2 IRQ_TYPE_LEVEL_HIGH>, <0 3 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A7790_CLK_IRQC>; + power-domains = <&cpg_clocks>; }; dmac0: dma-controller@e6700000 { @@ -281,6 +291,7 @@ "ch12", "ch13", "ch14"; clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC0>; clock-names = "fck"; + power-domains = <&cpg_clocks>; #dma-cells = <1>; dma-channels = <15>; }; @@ -311,6 +322,7 @@ "ch12", "ch13", "ch14"; clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC1>; clock-names = "fck"; + power-domains = <&cpg_clocks>; #dma-cells = <1>; dma-channels = <15>; }; @@ -339,6 +351,7 @@ "ch12"; clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC0>; clock-names = "fck"; + power-domains = <&cpg_clocks>; #dma-cells = <1>; dma-channels = <13>; }; @@ -367,6 +380,7 @@ "ch12"; clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC1>; clock-names = "fck"; + power-domains = <&cpg_clocks>; #dma-cells = <1>; dma-channels = <13>; }; @@ -378,6 +392,7 @@ 0 109 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&mstp3_clks R8A7790_CLK_USBDMAC0>; + power-domains = <&cpg_clocks>; #dma-cells = <1>; dma-channels = <2>; }; @@ -389,6 +404,7 @@ 0 110 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&mstp3_clks R8A7790_CLK_USBDMAC1>; + power-domains = <&cpg_clocks>; #dma-cells = <1>; dma-channels = <2>; }; @@ -400,6 +416,7 @@ reg = <0 0xe6508000 0 0x40>; interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C0>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -410,6 +427,7 @@ reg = <0 0xe6518000 0 0x40>; interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C1>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -420,6 +438,7 @@ reg = <0 0xe6530000 0 0x40>; interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C2>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -430,6 +449,7 @@ reg = <0 0xe6540000 0 0x40>; interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_I2C3>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -442,6 +462,7 @@ clocks = <&mstp3_clks R8A7790_CLK_IIC0>; dmas = <&dmac0 0x61>, <&dmac0 0x62>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -454,6 +475,7 @@ clocks = <&mstp3_clks R8A7790_CLK_IIC1>; dmas = <&dmac0 0x65>, <&dmac0 0x66>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -466,6 +488,7 @@ clocks = <&mstp3_clks R8A7790_CLK_IIC2>; dmas = <&dmac0 0x69>, <&dmac0 0x6a>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -478,6 +501,7 @@ clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>; dmas = <&dmac0 0x77>, <&dmac0 0x78>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -488,6 +512,7 @@ clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>; dmas = <&dmac0 0xd1>, <&dmac0 0xd2>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; reg-io-width = <4>; status = "disabled"; max-frequency = <97500000>; @@ -500,6 +525,7 @@ clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>; dmas = <&dmac0 0xe1>, <&dmac0 0xe2>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; reg-io-width = <4>; status = "disabled"; max-frequency = <97500000>; @@ -517,6 +543,7 @@ clocks = <&mstp3_clks R8A7790_CLK_SDHI0>; dmas = <&dmac1 0xcd>, <&dmac1 0xce>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -527,6 +554,7 @@ clocks = <&mstp3_clks R8A7790_CLK_SDHI1>; dmas = <&dmac1 0xc9>, <&dmac1 0xca>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -537,6 +565,7 @@ clocks = <&mstp3_clks R8A7790_CLK_SDHI2>; dmas = <&dmac1 0xc1>, <&dmac1 0xc2>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -547,6 +576,7 @@ clocks = <&mstp3_clks R8A7790_CLK_SDHI3>; dmas = <&dmac1 0xd3>, <&dmac1 0xd4>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -558,6 +588,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x21>, <&dmac0 0x22>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -569,6 +600,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x25>, <&dmac0 0x26>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -580,6 +612,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x27>, <&dmac0 0x28>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -591,6 +624,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x3d>, <&dmac0 0x3e>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -602,6 +636,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x19>, <&dmac0 0x1a>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -613,6 +648,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x1d>, <&dmac0 0x1e>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -624,6 +660,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x29>, <&dmac0 0x2a>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -635,6 +672,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -646,6 +684,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x39>, <&dmac0 0x3a>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -657,6 +696,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -665,17 +705,30 @@ reg = <0 0xee700000 0 0x400>; interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_ETHER>; + power-domains = <&cpg_clocks>; phy-mode = "rmii"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a7790"; + reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; + interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7790_CLK_ETHERAVB>; + power-domains = <&cpg_clocks>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + sata0: sata@ee300000 { compatible = "renesas,sata-r8a7790"; reg = <0 0xee300000 0 0x2000>; interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_SATA0>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -684,6 +737,7 @@ reg = <0 0xee500000 0 0x2000>; interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7790_CLK_SATA1>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -692,12 +746,13 @@ reg = <0 0xe6590000 0 0x100>; interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7790_CLK_HSUSB>; - renesas,buswait = <4>; - phys = <&usb0 1>; - phy-names = "usb"; dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; + power-domains = <&cpg_clocks>; + renesas,buswait = <4>; + phys = <&usb0 1>; + phy-names = "usb"; status = "disabled"; }; @@ -708,6 +763,7 @@ #size-cells = <0>; clocks = <&mstp7_clks R8A7790_CLK_HSUSB>; clock-names = "usbhs"; + power-domains = <&cpg_clocks>; status = "disabled"; usb0: usb-channel@0 { @@ -722,33 +778,37 @@ vin0: video@e6ef0000 { compatible = "renesas,vin-r8a7790"; - clocks = <&mstp8_clks R8A7790_CLK_VIN0>; reg = <0 0xe6ef0000 0 0x1000>; interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7790_CLK_VIN0>; + power-domains = <&cpg_clocks>; status = "disabled"; }; vin1: video@e6ef1000 { compatible = "renesas,vin-r8a7790"; - clocks = <&mstp8_clks R8A7790_CLK_VIN1>; reg = <0 0xe6ef1000 0 0x1000>; interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7790_CLK_VIN1>; + power-domains = <&cpg_clocks>; status = "disabled"; }; vin2: video@e6ef2000 { compatible = "renesas,vin-r8a7790"; - clocks = <&mstp8_clks R8A7790_CLK_VIN2>; reg = <0 0xe6ef2000 0 0x1000>; interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7790_CLK_VIN2>; + power-domains = <&cpg_clocks>; status = "disabled"; }; vin3: video@e6ef3000 { compatible = "renesas,vin-r8a7790"; - clocks = <&mstp8_clks R8A7790_CLK_VIN3>; reg = <0 0xe6ef3000 0 0x1000>; interrupts = <0 191 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7790_CLK_VIN3>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -757,6 +817,7 @@ reg = <0 0xfe920000 0 0x8000>; interrupts = <0 266 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_VSP1_R>; + power-domains = <&cpg_clocks>; renesas,has-sru; renesas,#rpf = <5>; @@ -769,6 +830,7 @@ reg = <0 0xfe928000 0 0x8000>; interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>; + power-domains = <&cpg_clocks>; renesas,has-lut; renesas,has-sru; @@ -782,6 +844,7 @@ reg = <0 0xfe930000 0 0x8000>; interrupts = <0 246 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU0>; + power-domains = <&cpg_clocks>; renesas,has-lif; renesas,has-lut; @@ -795,6 +858,7 @@ reg = <0 0xfe938000 0 0x8000>; interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU1>; + power-domains = <&cpg_clocks>; renesas,has-lif; renesas,has-lut; @@ -849,6 +913,7 @@ clocks = <&mstp9_clks R8A7790_CLK_RCAN0>, <&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -859,9 +924,18 @@ clocks = <&mstp9_clks R8A7790_CLK_RCAN1>, <&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; + power-domains = <&cpg_clocks>; status = "disabled"; }; + jpu: jpeg-codec@fe980000 { + compatible = "renesas,jpu-r8a7790"; + reg = <0 0xfe980000 0 0x10300>; + interrupts = <0 272 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7790_CLK_JPU>; + power-domains = <&cpg_clocks>; + }; + clocks { #address-cells = <2>; #size-cells = <2>; @@ -936,6 +1010,7 @@ clock-output-names = "main", "pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1", "z", "rcan", "adsp"; + #power-domain-cells = <0>; }; /* Variable factor clocks */ @@ -1249,16 +1324,18 @@ compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>; clocks = <&hp_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>, - <&zg_clk>, <&p_clk>, <&zs_clk>, <&zs_clk>; + <&zg_clk>, <&hp_clk>, <&p_clk>, <&zs_clk>, + <&zs_clk>; #clock-cells = <1>; clock-indices = < R8A7790_CLK_MLB R8A7790_CLK_VIN3 R8A7790_CLK_VIN2 - R8A7790_CLK_VIN1 R8A7790_CLK_VIN0 R8A7790_CLK_ETHER + R8A7790_CLK_VIN1 R8A7790_CLK_VIN0 + R8A7790_CLK_ETHERAVB R8A7790_CLK_ETHER R8A7790_CLK_SATA1 R8A7790_CLK_SATA0 >; clock-output-names = - "mlb", "vin3", "vin2", "vin1", "vin0", "ether", - "sata1", "sata0"; + "mlb", "vin3", "vin2", "vin1", "vin0", + "etheravb", "ether", "sata1", "sata0"; }; mstp9_clks: mstp9_clks@e6150994 { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -1291,6 +1368,7 @@ <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, + <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>; #clock-cells = <1>; @@ -1300,6 +1378,7 @@ R8A7790_CLK_SSI4 R8A7790_CLK_SSI3 R8A7790_CLK_SSI2 R8A7790_CLK_SSI1 R8A7790_CLK_SSI0 R8A7790_CLK_SCU_ALL R8A7790_CLK_SCU_DVC1 R8A7790_CLK_SCU_DVC0 + R8A7790_CLK_SCU_CTU1_MIX1 R8A7790_CLK_SCU_CTU0_MIX0 R8A7790_CLK_SCU_SRC9 R8A7790_CLK_SCU_SRC8 R8A7790_CLK_SCU_SRC7 R8A7790_CLK_SCU_SRC6 R8A7790_CLK_SCU_SRC5 R8A7790_CLK_SCU_SRC4 R8A7790_CLK_SCU_SRC3 R8A7790_CLK_SCU_SRC2 R8A7790_CLK_SCU_SRC1 R8A7790_CLK_SCU_SRC0 >; @@ -1309,6 +1388,7 @@ "ssi4", "ssi3", "ssi2", "ssi1", "ssi0", "scu-all", "scu-dvc1", "scu-dvc0", + "scu-ctu1-mix1", "scu-ctu0-mix0", "scu-src9", "scu-src8", "scu-src7", "scu-src6", "scu-src5", "scu-src4", "scu-src3", "scu-src2", "scu-src1", "scu-src0"; }; @@ -1321,6 +1401,7 @@ clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>; dmas = <&dmac0 0x17>, <&dmac0 0x18>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -1334,6 +1415,7 @@ clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>; dmas = <&dmac0 0x51>, <&dmac0 0x52>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1346,6 +1428,7 @@ clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>; dmas = <&dmac0 0x55>, <&dmac0 0x56>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1358,6 +1441,7 @@ clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>; dmas = <&dmac0 0x41>, <&dmac0 0x42>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1370,6 +1454,7 @@ clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>; dmas = <&dmac0 0x45>, <&dmac0 0x46>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1380,6 +1465,7 @@ reg = <0 0xee000000 0 0xc00>; interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_SSUSB>; + power-domains = <&cpg_clocks>; phys = <&usb2 1>; phy-names = "usb"; status = "disabled"; @@ -1388,10 +1474,11 @@ pci0: pci@ee090000 { compatible = "renesas,pci-r8a7790"; device_type = "pci"; - clocks = <&mstp7_clks R8A7790_CLK_EHCI>; reg = <0 0xee090000 0 0xc00>, <0 0xee080000 0 0x1100>; interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7790_CLK_EHCI>; + power-domains = <&cpg_clocks>; status = "disabled"; bus-range = <0 0>; @@ -1422,10 +1509,11 @@ pci1: pci@ee0b0000 { compatible = "renesas,pci-r8a7790"; device_type = "pci"; - clocks = <&mstp7_clks R8A7790_CLK_EHCI>; reg = <0 0xee0b0000 0 0xc00>, <0 0xee0a0000 0 0x1100>; interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7790_CLK_EHCI>; + power-domains = <&cpg_clocks>; status = "disabled"; bus-range = <1 1>; @@ -1443,6 +1531,7 @@ compatible = "renesas,pci-r8a7790"; device_type = "pci"; clocks = <&mstp7_clks R8A7790_CLK_EHCI>; + power-domains = <&cpg_clocks>; reg = <0 0xee0d0000 0 0xc00>, <0 0xee0c0000 0 0x1100>; interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; @@ -1495,6 +1584,7 @@ interrupt-map = <0 0 0 0 &gic 0 116 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_PCIEC>, <&pcie_bus_clk>; clock-names = "pcie", "pcie_bus"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -1524,6 +1614,8 @@ <&mstp10_clks R8A7790_CLK_SCU_SRC5>, <&mstp10_clks R8A7790_CLK_SCU_SRC4>, <&mstp10_clks R8A7790_CLK_SCU_SRC3>, <&mstp10_clks R8A7790_CLK_SCU_SRC2>, <&mstp10_clks R8A7790_CLK_SCU_SRC1>, <&mstp10_clks R8A7790_CLK_SCU_SRC0>, + <&mstp10_clks R8A7790_CLK_SCU_CTU0_MIX0>, <&mstp10_clks R8A7790_CLK_SCU_CTU1_MIX1>, + <&mstp10_clks R8A7790_CLK_SCU_CTU0_MIX0>, <&mstp10_clks R8A7790_CLK_SCU_CTU1_MIX1>, <&mstp10_clks R8A7790_CLK_SCU_DVC0>, <&mstp10_clks R8A7790_CLK_SCU_DVC1>, <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>; clock-names = "ssi-all", @@ -1531,6 +1623,8 @@ "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0", "src.9", "src.8", "src.7", "src.6", "src.5", "src.4", "src.3", "src.2", "src.1", "src.0", + "ctu.0", "ctu.1", + "mix.0", "mix.1", "dvc.0", "dvc.1", "clk_a", "clk_b", "clk_c", "clk_i"; @@ -1547,6 +1641,22 @@ }; }; + rcar_sound,mix { + mix0: mix@0 { }; + mix1: mix@1 { }; + }; + + rcar_sound,ctu { + ctu00: ctu@0 { }; + ctu01: ctu@1 { }; + ctu02: ctu@2 { }; + ctu03: ctu@3 { }; + ctu10: ctu@4 { }; + ctu11: ctu@5 { }; + ctu12: ctu@6 { }; + ctu13: ctu@7 { }; + }; + rcar_sound,src { src0: src@0 { interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index cffe33ff4d16..dc158845afdc 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -242,7 +242,7 @@ 1800000 0>; }; - sound { + rsnd_ak4643: sound { compatible = "simple-audio-card"; simple-audio-card,format = "left_j"; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index dc1cd3f16606..831525dd39a6 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -70,7 +70,7 @@ }; gic: interrupt-controller@f1001000 { - compatible = "arm,cortex-a15-gic"; + compatible = "arm,gic-400"; #interrupt-cells = <3>; #address-cells = <0>; interrupt-controller; @@ -91,6 +91,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7791_CLK_GPIO0>; + power-domains = <&cpg_clocks>; }; gpio1: gpio@e6051000 { @@ -103,6 +104,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7791_CLK_GPIO1>; + power-domains = <&cpg_clocks>; }; gpio2: gpio@e6052000 { @@ -115,6 +117,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7791_CLK_GPIO2>; + power-domains = <&cpg_clocks>; }; gpio3: gpio@e6053000 { @@ -127,6 +130,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7791_CLK_GPIO3>; + power-domains = <&cpg_clocks>; }; gpio4: gpio@e6054000 { @@ -139,6 +143,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7791_CLK_GPIO4>; + power-domains = <&cpg_clocks>; }; gpio5: gpio@e6055000 { @@ -151,6 +156,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7791_CLK_GPIO5>; + power-domains = <&cpg_clocks>; }; gpio6: gpio@e6055400 { @@ -163,6 +169,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7791_CLK_GPIO6>; + power-domains = <&cpg_clocks>; }; gpio7: gpio@e6055800 { @@ -175,6 +182,7 @@ #interrupt-cells = <2>; interrupt-controller; clocks = <&mstp9_clks R8A7791_CLK_GPIO7>; + power-domains = <&cpg_clocks>; }; thermal@e61f0000 { @@ -182,6 +190,7 @@ reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp5_clks R8A7791_CLK_THERMAL>; + power-domains = <&cpg_clocks>; }; timer { @@ -199,6 +208,7 @@ <0 143 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7791_CLK_CMT0>; clock-names = "fck"; + power-domains = <&cpg_clocks>; renesas,channels-mask = <0x60>; @@ -218,6 +228,7 @@ <0 127 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_CMT1>; clock-names = "fck"; + power-domains = <&cpg_clocks>; renesas,channels-mask = <0xff>; @@ -240,6 +251,7 @@ <0 16 IRQ_TYPE_LEVEL_HIGH>, <0 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A7791_CLK_IRQC>; + power-domains = <&cpg_clocks>; }; dmac0: dma-controller@e6700000 { @@ -268,6 +280,7 @@ "ch12", "ch13", "ch14"; clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC0>; clock-names = "fck"; + power-domains = <&cpg_clocks>; #dma-cells = <1>; dma-channels = <15>; }; @@ -298,6 +311,7 @@ "ch12", "ch13", "ch14"; clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC1>; clock-names = "fck"; + power-domains = <&cpg_clocks>; #dma-cells = <1>; dma-channels = <15>; }; @@ -326,6 +340,7 @@ "ch12"; clocks = <&mstp5_clks R8A7791_CLK_AUDIO_DMAC0>; clock-names = "fck"; + power-domains = <&cpg_clocks>; #dma-cells = <1>; dma-channels = <13>; }; @@ -354,6 +369,7 @@ "ch12"; clocks = <&mstp5_clks R8A7791_CLK_AUDIO_DMAC1>; clock-names = "fck"; + power-domains = <&cpg_clocks>; #dma-cells = <1>; dma-channels = <13>; }; @@ -365,6 +381,7 @@ 0 109 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&mstp3_clks R8A7791_CLK_USBDMAC0>; + power-domains = <&cpg_clocks>; #dma-cells = <1>; dma-channels = <2>; }; @@ -376,6 +393,7 @@ 0 110 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&mstp3_clks R8A7791_CLK_USBDMAC1>; + power-domains = <&cpg_clocks>; #dma-cells = <1>; dma-channels = <2>; }; @@ -388,6 +406,7 @@ reg = <0 0xe6508000 0 0x40>; interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C0>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -398,6 +417,7 @@ reg = <0 0xe6518000 0 0x40>; interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C1>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -408,6 +428,7 @@ reg = <0 0xe6530000 0 0x40>; interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C2>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -418,6 +439,7 @@ reg = <0 0xe6540000 0 0x40>; interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C3>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -428,6 +450,7 @@ reg = <0 0xe6520000 0 0x40>; interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C4>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -439,6 +462,7 @@ reg = <0 0xe6528000 0 0x40>; interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C5>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -452,6 +476,7 @@ clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>; dmas = <&dmac0 0x77>, <&dmac0 0x78>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -464,6 +489,7 @@ clocks = <&mstp3_clks R8A7791_CLK_IIC0>; dmas = <&dmac0 0x61>, <&dmac0 0x62>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -476,6 +502,7 @@ clocks = <&mstp3_clks R8A7791_CLK_IIC1>; dmas = <&dmac0 0x65>, <&dmac0 0x66>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -492,6 +519,7 @@ clocks = <&mstp3_clks R8A7791_CLK_MMCIF0>; dmas = <&dmac0 0xd1>, <&dmac0 0xd2>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; reg-io-width = <4>; status = "disabled"; max-frequency = <97500000>; @@ -504,6 +532,7 @@ clocks = <&mstp3_clks R8A7791_CLK_SDHI0>; dmas = <&dmac1 0xcd>, <&dmac1 0xce>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -514,6 +543,7 @@ clocks = <&mstp3_clks R8A7791_CLK_SDHI1>; dmas = <&dmac1 0xc1>, <&dmac1 0xc2>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -524,6 +554,7 @@ clocks = <&mstp3_clks R8A7791_CLK_SDHI2>; dmas = <&dmac1 0xd3>, <&dmac1 0xd4>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -535,6 +566,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x21>, <&dmac0 0x22>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -546,6 +578,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x25>, <&dmac0 0x26>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -557,6 +590,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x27>, <&dmac0 0x28>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -568,6 +602,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x1b>, <&dmac0 0x1c>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -579,6 +614,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x1f>, <&dmac0 0x20>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -590,6 +626,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x23>, <&dmac0 0x24>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -601,6 +638,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x3d>, <&dmac0 0x3e>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -612,6 +650,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x19>, <&dmac0 0x1a>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -623,6 +662,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x1d>, <&dmac0 0x1e>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -634,6 +674,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x29>, <&dmac0 0x2a>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -645,6 +686,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -656,6 +698,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x2b>, <&dmac0 0x2c>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -667,6 +710,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x2f>, <&dmac0 0x30>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -678,6 +722,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0xfb>, <&dmac0 0xfc>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -689,6 +734,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0xfd>, <&dmac0 0xfe>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -700,6 +746,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x39>, <&dmac0 0x3a>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -711,6 +758,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -722,6 +770,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x3b>, <&dmac0 0x3c>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -730,6 +779,7 @@ reg = <0 0xee700000 0 0x400>; interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7791_CLK_ETHER>; + power-domains = <&cpg_clocks>; phy-mode = "rmii"; #address-cells = <1>; #size-cells = <0>; @@ -741,6 +791,7 @@ reg = <0 0xee300000 0 0x2000>; interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7791_CLK_SATA0>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -749,6 +800,7 @@ reg = <0 0xee500000 0 0x2000>; interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7791_CLK_SATA1>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -757,12 +809,13 @@ reg = <0 0xe6590000 0 0x100>; interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_HSUSB>; - renesas,buswait = <4>; - phys = <&usb0 1>; - phy-names = "usb"; dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; + power-domains = <&cpg_clocks>; + renesas,buswait = <4>; + phys = <&usb0 1>; + phy-names = "usb"; status = "disabled"; }; @@ -773,6 +826,7 @@ #size-cells = <0>; clocks = <&mstp7_clks R8A7791_CLK_HSUSB>; clock-names = "usbhs"; + power-domains = <&cpg_clocks>; status = "disabled"; usb0: usb-channel@0 { @@ -787,25 +841,28 @@ vin0: video@e6ef0000 { compatible = "renesas,vin-r8a7791"; - clocks = <&mstp8_clks R8A7791_CLK_VIN0>; reg = <0 0xe6ef0000 0 0x1000>; interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7791_CLK_VIN0>; + power-domains = <&cpg_clocks>; status = "disabled"; }; vin1: video@e6ef1000 { compatible = "renesas,vin-r8a7791"; - clocks = <&mstp8_clks R8A7791_CLK_VIN1>; reg = <0 0xe6ef1000 0 0x1000>; interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7791_CLK_VIN1>; + power-domains = <&cpg_clocks>; status = "disabled"; }; vin2: video@e6ef2000 { compatible = "renesas,vin-r8a7791"; - clocks = <&mstp8_clks R8A7791_CLK_VIN2>; reg = <0 0xe6ef2000 0 0x1000>; interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7791_CLK_VIN2>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -814,6 +871,7 @@ reg = <0 0xfe928000 0 0x8000>; interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7791_CLK_VSP1_S>; + power-domains = <&cpg_clocks>; renesas,has-lut; renesas,has-sru; @@ -827,6 +885,7 @@ reg = <0 0xfe930000 0 0x8000>; interrupts = <0 246 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU0>; + power-domains = <&cpg_clocks>; renesas,has-lif; renesas,has-lut; @@ -840,6 +899,7 @@ reg = <0 0xfe938000 0 0x8000>; interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU1>; + power-domains = <&cpg_clocks>; renesas,has-lif; renesas,has-lut; @@ -885,6 +945,7 @@ clocks = <&mstp9_clks R8A7791_CLK_RCAN0>, <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -895,9 +956,18 @@ clocks = <&mstp9_clks R8A7791_CLK_RCAN1>, <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; + power-domains = <&cpg_clocks>; status = "disabled"; }; + jpu: jpeg-codec@fe980000 { + compatible = "renesas,jpu-r8a7791"; + reg = <0 0xfe980000 0 0x10300>; + interrupts = <0 272 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7791_CLK_JPU>; + power-domains = <&cpg_clocks>; + }; + clocks { #address-cells = <2>; #size-cells = <2>; @@ -972,6 +1042,7 @@ clock-output-names = "main", "pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "z", "rcan", "adsp"; + #power-domain-cells = <0>; }; /* Variable factor clocks */ @@ -1311,6 +1382,7 @@ <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>, + <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>; #clock-cells = <1>; @@ -1320,6 +1392,7 @@ R8A7791_CLK_SSI4 R8A7791_CLK_SSI3 R8A7791_CLK_SSI2 R8A7791_CLK_SSI1 R8A7791_CLK_SSI0 R8A7791_CLK_SCU_ALL R8A7791_CLK_SCU_DVC1 R8A7791_CLK_SCU_DVC0 + R8A7791_CLK_SCU_CTU1_MIX1 R8A7791_CLK_SCU_CTU0_MIX0 R8A7791_CLK_SCU_SRC9 R8A7791_CLK_SCU_SRC8 R8A7791_CLK_SCU_SRC7 R8A7791_CLK_SCU_SRC6 R8A7791_CLK_SCU_SRC5 R8A7791_CLK_SCU_SRC4 R8A7791_CLK_SCU_SRC3 R8A7791_CLK_SCU_SRC2 R8A7791_CLK_SCU_SRC1 R8A7791_CLK_SCU_SRC0 >; @@ -1329,6 +1402,7 @@ "ssi4", "ssi3", "ssi2", "ssi1", "ssi0", "scu-all", "scu-dvc1", "scu-dvc0", + "scu-ctu1-mix1", "scu-ctu0-mix0", "scu-src9", "scu-src8", "scu-src7", "scu-src6", "scu-src5", "scu-src4", "scu-src3", "scu-src2", "scu-src1", "scu-src0"; }; @@ -1351,6 +1425,7 @@ clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>; dmas = <&dmac0 0x17>, <&dmac0 0x18>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -1364,6 +1439,7 @@ clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>; dmas = <&dmac0 0x51>, <&dmac0 0x52>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1376,6 +1452,7 @@ clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>; dmas = <&dmac0 0x55>, <&dmac0 0x56>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1388,6 +1465,7 @@ clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>; dmas = <&dmac0 0x41>, <&dmac0 0x42>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1398,6 +1476,7 @@ reg = <0 0xee000000 0 0xc00>; interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SSUSB>; + power-domains = <&cpg_clocks>; phys = <&usb2 1>; phy-names = "usb"; status = "disabled"; @@ -1406,10 +1485,11 @@ pci0: pci@ee090000 { compatible = "renesas,pci-r8a7791"; device_type = "pci"; - clocks = <&mstp7_clks R8A7791_CLK_EHCI>; reg = <0 0xee090000 0 0xc00>, <0 0xee080000 0 0x1100>; interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7791_CLK_EHCI>; + power-domains = <&cpg_clocks>; status = "disabled"; bus-range = <0 0>; @@ -1440,10 +1520,11 @@ pci1: pci@ee0d0000 { compatible = "renesas,pci-r8a7791"; device_type = "pci"; - clocks = <&mstp7_clks R8A7791_CLK_EHCI>; reg = <0 0xee0d0000 0 0xc00>, <0 0xee0c0000 0 0x1100>; interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7791_CLK_EHCI>; + power-domains = <&cpg_clocks>; status = "disabled"; bus-range = <1 1>; @@ -1493,6 +1574,7 @@ interrupt-map = <0 0 0 0 &gic 0 116 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_PCIEC>, <&pcie_bus_clk>; clock-names = "pcie", "pcie_bus"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -1582,6 +1664,8 @@ <&mstp10_clks R8A7791_CLK_SCU_SRC5>, <&mstp10_clks R8A7791_CLK_SCU_SRC4>, <&mstp10_clks R8A7791_CLK_SCU_SRC3>, <&mstp10_clks R8A7791_CLK_SCU_SRC2>, <&mstp10_clks R8A7791_CLK_SCU_SRC1>, <&mstp10_clks R8A7791_CLK_SCU_SRC0>, + <&mstp10_clks R8A7791_CLK_SCU_CTU0_MIX0>, <&mstp10_clks R8A7791_CLK_SCU_CTU1_MIX1>, + <&mstp10_clks R8A7791_CLK_SCU_CTU0_MIX0>, <&mstp10_clks R8A7791_CLK_SCU_CTU1_MIX1>, <&mstp10_clks R8A7791_CLK_SCU_DVC0>, <&mstp10_clks R8A7791_CLK_SCU_DVC1>, <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>; clock-names = "ssi-all", @@ -1589,6 +1673,8 @@ "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0", "src.9", "src.8", "src.7", "src.6", "src.5", "src.4", "src.3", "src.2", "src.1", "src.0", + "ctu.0", "ctu.1", + "mix.0", "mix.1", "dvc.0", "dvc.1", "clk_a", "clk_b", "clk_c", "clk_i"; @@ -1605,6 +1691,22 @@ }; }; + rcar_sound,mix { + mix0: mix@0 { }; + mix1: mix@1 { }; + }; + + rcar_sound,ctu { + ctu00: ctu@0 { }; + ctu01: ctu@1 { }; + ctu02: ctu@2 { }; + ctu03: ctu@3 { }; + ctu10: ctu@4 { }; + ctu11: ctu@5 { }; + ctu12: ctu@6 { }; + ctu13: ctu@7 { }; + }; + rcar_sound,src { src0: src@0 { interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts new file mode 100644 index 000000000000..96443ec5f6ab --- /dev/null +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -0,0 +1,63 @@ +/* + * Device Tree Source for the Gose board + * + * Copyright (C) 2014-2015 Renesas Electronics Corporation + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a7793.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Gose"; + compatible = "renesas,gose", "renesas,r8a7793"; + + aliases { + serial0 = &scif0; + serial1 = &scif1; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + stdout-path = &scif0; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x40000000>; + }; +}; + +&extal_clk { + clock-frequency = <20000000>; +}; + +ðer { + phy-handle = <&phy1>; + renesas,ether-link-active-low; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + interrupt-parent = <&irqc0>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <1>; + }; +}; + +&cmt0 { + status = "okay"; +}; + +&scif0 { + status = "okay"; +}; + +&scif1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi new file mode 100644 index 000000000000..c4654047e684 --- /dev/null +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -0,0 +1,374 @@ +/* + * Device Tree Source for the r8a7793 SoC + * + * Copyright (C) 2014-2015 Renesas Electronics Corporation + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <dt-bindings/clock/r8a7793-clock.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "renesas,r8a7793"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + clock-frequency = <1500000000>; + voltage-tolerance = <1>; /* 1% */ + clocks = <&cpg_clocks R8A7793_CLK_Z>; + clock-latency = <300000>; /* 300 us */ + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1500000 1000000>, + <1312500 1000000>, + <1125000 1000000>, + < 937500 1000000>, + < 750000 1000000>, + < 375000 1000000>; + }; + }; + + gic: interrupt-controller@f1001000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0xf1001000 0 0x1000>, + <0 0xf1002000 0 0x1000>, + <0 0xf1004000 0 0x2000>, + <0 0xf1006000 0 0x2000>; + interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <1 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <1 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <1 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + + cmt0: timer@ffca0000 { + compatible = "renesas,cmt-48-r8a7793", "renesas,cmt-48-gen2"; + reg = <0 0xffca0000 0 0x1004>; + interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>, + <0 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7793_CLK_CMT0>; + clock-names = "fck"; + power-domains = <&cpg_clocks>; + + renesas,channels-mask = <0x60>; + + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,cmt-48-r8a7793", "renesas,cmt-48-gen2"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>, + <0 121 IRQ_TYPE_LEVEL_HIGH>, + <0 122 IRQ_TYPE_LEVEL_HIGH>, + <0 123 IRQ_TYPE_LEVEL_HIGH>, + <0 124 IRQ_TYPE_LEVEL_HIGH>, + <0 125 IRQ_TYPE_LEVEL_HIGH>, + <0 126 IRQ_TYPE_LEVEL_HIGH>, + <0 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7793_CLK_CMT1>; + clock-names = "fck"; + power-domains = <&cpg_clocks>; + + renesas,channels-mask = <0xff>; + + status = "disabled"; + }; + + irqc0: interrupt-controller@e61c0000 { + compatible = "renesas,irqc-r8a7793", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>, + <0 1 IRQ_TYPE_LEVEL_HIGH>, + <0 2 IRQ_TYPE_LEVEL_HIGH>, + <0 3 IRQ_TYPE_LEVEL_HIGH>, + <0 12 IRQ_TYPE_LEVEL_HIGH>, + <0 13 IRQ_TYPE_LEVEL_HIGH>, + <0 14 IRQ_TYPE_LEVEL_HIGH>, + <0 15 IRQ_TYPE_LEVEL_HIGH>, + <0 16 IRQ_TYPE_LEVEL_HIGH>, + <0 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R8A7793_CLK_IRQC>; + power-domains = <&cpg_clocks>; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a7793", "renesas,scif"; + reg = <0 0xe6e60000 0 64>; + interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7793_CLK_SCIF0>; + clock-names = "sci_ick"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a7793", "renesas,scif"; + reg = <0 0xe6e68000 0 64>; + interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7793_CLK_SCIF1>; + clock-names = "sci_ick"; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + ether: ethernet@ee700000 { + compatible = "renesas,ether-r8a7793"; + reg = <0 0xee700000 0 0x400>; + interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7793_CLK_ETHER>; + power-domains = <&cpg_clocks>; + phy-mode = "rmii"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + clocks { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* External root clock */ + extal_clk: extal_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + clock-output-names = "extal"; + }; + + /* Special CPG clocks */ + cpg_clocks: cpg_clocks@e6150000 { + compatible = "renesas,r8a7793-cpg-clocks", + "renesas,rcar-gen2-cpg-clocks"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>; + #clock-cells = <1>; + clock-output-names = "main", "pll0", "pll1", "pll3", + "lb", "qspi", "sdh", "sd0", "z", + "rcan", "adsp"; + #power-domain-cells = <0>; + }; + + /* Variable factor clocks */ + sd2_clk: sd2_clk@e6150078 { + compatible = "renesas,r8a7793-div6-clock", + "renesas,cpg-div6-clock"; + reg = <0 0xe6150078 0 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "sd2"; + }; + sd3_clk: sd3_clk@e615026c { + compatible = "renesas,r8a7793-div6-clock", + "renesas,cpg-div6-clock"; + reg = <0 0xe615026c 0 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "sd3"; + }; + mmc0_clk: mmc0_clk@e6150240 { + compatible = "renesas,r8a7793-div6-clock", + "renesas,cpg-div6-clock"; + reg = <0 0xe6150240 0 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "mmc0"; + }; + + /* Fixed factor clocks */ + pll1_div2_clk: pll1_div2_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7793_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "pll1_div2"; + }; + zg_clk: zg_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7793_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <5>; + clock-mult = <1>; + clock-output-names = "zg"; + }; + zx_clk: zx_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7793_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <3>; + clock-mult = <1>; + clock-output-names = "zx"; + }; + zs_clk: zs_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7793_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <6>; + clock-mult = <1>; + clock-output-names = "zs"; + }; + hp_clk: hp_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7793_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <12>; + clock-mult = <1>; + clock-output-names = "hp"; + }; + p_clk: p_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7793_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <24>; + clock-mult = <1>; + clock-output-names = "p"; + }; + rclk_clk: rclk_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7793_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <(48 * 1024)>; + clock-mult = <1>; + clock-output-names = "rclk"; + }; + mp_clk: mp_clk { + compatible = "fixed-factor-clock"; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-div = <15>; + clock-mult = <1>; + clock-output-names = "mp"; + }; + cp_clk: cp_clk { + compatible = "fixed-factor-clock"; + clocks = <&extal_clk>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "cp"; + }; + + /* Gate clocks */ + mstp1_clks: mstp1_clks@e6150134 { + compatible = "renesas,r8a7793-mstp-clocks", + "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; + clocks = <&zs_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>, + <&zg_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, + <&p_clk>, <&p_clk>, <&rclk_clk>, <&cp_clk>, + <&zs_clk>, <&zs_clk>, <&zs_clk>; + #clock-cells = <1>; + clock-indices = < + R8A7793_CLK_VCP0 R8A7793_CLK_VPC0 + R8A7793_CLK_SSP1 R8A7793_CLK_TMU1 + R8A7793_CLK_3DG R8A7793_CLK_2DDMAC + R8A7793_CLK_FDP1_1 R8A7793_CLK_FDP1_0 + R8A7793_CLK_TMU3 R8A7793_CLK_TMU2 + R8A7793_CLK_CMT0 R8A7793_CLK_TMU0 + R8A7793_CLK_VSP1_DU1 R8A7793_CLK_VSP1_DU0 + R8A7793_CLK_VSP1_S + >; + clock-output-names = + "vcp0", "vpc0", "ssp_dev", "tmu1", + "pvrsrvkm", "tddmac", "fdp1", "fdp0", + "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", + "vsp1-du0", "vsps"; + }; + mstp3_clks: mstp3_clks@e615013c { + compatible = "renesas,r8a7793-mstp-clocks", + "renesas,cpg-mstp-clocks"; + reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; + clocks = <&cp_clk>, <&sd3_clk>, <&sd2_clk>, + <&cpg_clocks R8A7793_CLK_SD0>, <&mmc0_clk>, + <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, + <&rclk_clk>, <&hp_clk>, <&hp_clk>; + #clock-cells = <1>; + clock-indices = < + R8A7793_CLK_TPU0 R8A7793_CLK_SDHI2 + R8A7793_CLK_SDHI1 R8A7793_CLK_SDHI0 + R8A7793_CLK_MMCIF0 R8A7793_CLK_IIC0 + R8A7793_CLK_PCIEC R8A7793_CLK_IIC1 + R8A7793_CLK_SSUSB R8A7793_CLK_CMT1 + R8A7793_CLK_USBDMAC0 R8A7793_CLK_USBDMAC1 + >; + clock-output-names = + "tpu0", "sdhi2", "sdhi1", "sdhi0", "mmcif0", + "i2c7", "pciec", "i2c8", "ssusb", "cmt1", + "usbdmac0", "usbdmac1"; + }; + mstp4_clks: mstp4_clks@e6150140 { + compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>; + clocks = <&cp_clk>; + #clock-cells = <1>; + clock-indices = <R8A7793_CLK_IRQC>; + clock-output-names = "irqc"; + }; + mstp7_clks: mstp7_clks@e615014c { + compatible = "renesas,r8a7793-mstp-clocks", + "renesas,cpg-mstp-clocks"; + reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>; + clocks = <&mp_clk>, <&hp_clk>, <&zs_clk>, <&p_clk>, + <&p_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>, + <&p_clk>, <&p_clk>, <&p_clk>, <&zx_clk>, + <&zx_clk>, <&zx_clk>; + #clock-cells = <1>; + clock-indices = < + R8A7793_CLK_EHCI R8A7793_CLK_HSUSB + R8A7793_CLK_HSCIF2 R8A7793_CLK_SCIF5 + R8A7793_CLK_SCIF4 R8A7793_CLK_HSCIF1 + R8A7793_CLK_HSCIF0 R8A7793_CLK_SCIF3 + R8A7793_CLK_SCIF2 R8A7793_CLK_SCIF1 + R8A7793_CLK_SCIF0 R8A7793_CLK_DU1 + R8A7793_CLK_DU0 R8A7793_CLK_LVDS0 + >; + clock-output-names = + "ehci", "hsusb", "hscif2", "scif5", "scif4", + "hscif1", "hscif0", "scif3", "scif2", + "scif1", "scif0", "du1", "du0", "lvds0"; + }; + mstp8_clks: mstp8_clks@e6150990 { + compatible = "renesas,r8a7793-mstp-clocks", + "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>; + clocks = <&zx_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>, + <&p_clk>, <&zs_clk>, <&zs_clk>; + #clock-cells = <1>; + clock-indices = < + R8A7793_CLK_IPMMU_SGX R8A7793_CLK_VIN2 + R8A7793_CLK_VIN1 R8A7793_CLK_VIN0 + R8A7793_CLK_ETHER R8A7793_CLK_SATA1 + R8A7793_CLK_SATA0 + >; + clock-output-names = + "ipmmu_sgx", "vin2", "vin1", "vin0", "ether", + "sata1", "sata0"; + }; + }; + +}; diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts new file mode 100644 index 000000000000..d4dd5a30ccdf --- /dev/null +++ b/arch/arm/boot/dts/r8a7794-silk.dts @@ -0,0 +1,102 @@ +/* + * Device Tree Source for the SILK board + * + * Copyright (C) 2014 Renesas Electronics Corporation + * Copyright (C) 2014-2015 Renesas Solutions Corp. + * Copyright (C) 2014-2015 Cogent Embedded, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a7794.dtsi" + +/ { + model = "SILK"; + compatible = "renesas,silk", "renesas,r8a7794"; + + aliases { + serial0 = &scif2; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + stdout-path = &scif2; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x40000000>; + }; + + d3_3v: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "D3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&extal_clk { + clock-frequency = <20000000>; +}; + +&pfc { + scif2_pins: serial2 { + renesas,groups = "scif2_data"; + renesas,function = "scif2"; + }; + + ether_pins: ether { + renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; + renesas,function = "eth"; + }; + + phy1_pins: phy1 { + renesas,groups = "intc_irq8"; + renesas,function = "intc"; + }; + + mmcif0_pins: mmcif0 { + renesas,groups = "mmc_data8", "mmc_ctrl"; + renesas,function = "mmc"; + }; +}; + +&scif2 { + pinctrl-0 = <&scif2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +ðer { + pinctrl-0 = <ðer_pins &phy1_pins>; + pinctrl-names = "default"; + + phy-handle = <&phy1>; + renesas,ether-link-active-low; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + interrupt-parent = <&irqc0>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <1>; + }; +}; + +&mmcif0 { + pinctrl-0 = <&mmcif0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&d3_3v>; + vqmmc-supply = <&d3_3v>; + bus-width = <8>; + non-removable; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index b73819423311..97c8e9ace5eb 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -39,7 +39,7 @@ }; gic: interrupt-controller@f1001000 { - compatible = "arm,cortex-a7-gic"; + compatible = "arm,gic-400"; #interrupt-cells = <3>; #address-cells = <0>; interrupt-controller; @@ -57,6 +57,7 @@ <0 143 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7794_CLK_CMT0>; clock-names = "fck"; + power-domains = <&cpg_clocks>; renesas,channels-mask = <0x60>; @@ -76,6 +77,7 @@ <0 127 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_CMT1>; clock-names = "fck"; + power-domains = <&cpg_clocks>; renesas,channels-mask = <0xff>; @@ -106,6 +108,13 @@ <0 16 IRQ_TYPE_LEVEL_HIGH>, <0 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp4_clks R8A7794_CLK_IRQC>; + power-domains = <&cpg_clocks>; + }; + + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a7794"; + reg = <0 0xe6060000 0 0x11c>; + #gpio-range-cells = <3>; }; dmac0: dma-controller@e6700000 { @@ -134,6 +143,7 @@ "ch12", "ch13", "ch14"; clocks = <&mstp2_clks R8A7794_CLK_SYS_DMAC0>; clock-names = "fck"; + power-domains = <&cpg_clocks>; #dma-cells = <1>; dma-channels = <15>; }; @@ -164,6 +174,7 @@ "ch12", "ch13", "ch14"; clocks = <&mstp2_clks R8A7794_CLK_SYS_DMAC1>; clock-names = "fck"; + power-domains = <&cpg_clocks>; #dma-cells = <1>; dma-channels = <15>; }; @@ -176,6 +187,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x21>, <&dmac0 0x22>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -187,6 +199,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x25>, <&dmac0 0x26>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -198,6 +211,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x27>, <&dmac0 0x28>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -209,6 +223,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x1b>, <&dmac0 0x1c>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -220,6 +235,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x1f>, <&dmac0 0x20>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -231,6 +247,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x23>, <&dmac0 0x24>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -242,6 +259,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x3d>, <&dmac0 0x3e>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -253,6 +271,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x19>, <&dmac0 0x1a>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -264,6 +283,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x1d>, <&dmac0 0x1e>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -275,6 +295,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x29>, <&dmac0 0x2a>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -286,6 +307,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -297,6 +319,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x2b>, <&dmac0 0x2c>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -308,6 +331,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x2f>, <&dmac0 0x30>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -319,6 +343,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0xfb>, <&dmac0 0xfc>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -330,6 +355,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0xfd>, <&dmac0 0xfe>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -341,6 +367,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x39>, <&dmac0 0x3a>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -352,6 +379,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -363,6 +391,7 @@ clock-names = "sci_ick"; dmas = <&dmac0 0x3b>, <&dmac0 0x3c>; dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -371,17 +400,31 @@ reg = <0 0xee700000 0 0x400>; interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp8_clks R8A7794_CLK_ETHER>; + power-domains = <&cpg_clocks>; phy-mode = "rmii"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; + mmcif0: mmc@ee200000 { + compatible = "renesas,mmcif-r8a7794", "renesas,sh-mmcif"; + reg = <0 0xee200000 0 0x80>; + interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7794_CLK_MMCIF0>; + dmas = <&dmac0 0xd1>, <&dmac0 0xd2>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + reg-io-width = <4>; + status = "disabled"; + }; + sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a7794"; reg = <0 0xee100000 0 0x200>; interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_SDHI0>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -390,6 +433,7 @@ reg = <0 0xee140000 0 0x100>; interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_SDHI1>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -398,6 +442,7 @@ reg = <0 0xee160000 0 0x100>; interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_SDHI2>; + power-domains = <&cpg_clocks>; status = "disabled"; }; @@ -424,6 +469,7 @@ #clock-cells = <1>; clock-output-names = "main", "pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "z"; + #power-domain-cells = <0>; }; /* Variable factor clocks */ sd2_clk: sd2_clk@e6150078 { diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index b299b26926d4..c0273755431a 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -49,6 +49,7 @@ compatible = "mundoreader,bq-curie2", "rockchip,rk3066a"; memory { + device_type = "memory"; reg = <0x60000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts index 0a7304beb417..bae965c123c1 100644 --- a/arch/arm/boot/dts/rk3066a-marsboard.dts +++ b/arch/arm/boot/dts/rk3066a-marsboard.dts @@ -48,6 +48,7 @@ compatible = "haoyu,marsboard-rk3066", "rockchip,rk3066a"; memory { + device_type = "memory"; reg = <0x60000000 0x40000000>; }; @@ -201,6 +202,18 @@ status = "okay"; }; +&usbphy { + status = "okay"; +}; + +&usb_host { + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; + &wdt { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts index 3ac151102c2f..e36383c701dc 100644 --- a/arch/arm/boot/dts/rk3066a-rayeager.dts +++ b/arch/arm/boot/dts/rk3066a-rayeager.dts @@ -48,6 +48,7 @@ compatible = "chipspark,rayeager-px2", "rockchip,rk3066a"; memory { + device_type = "memory"; reg = <0x60000000 0x40000000>; }; @@ -459,6 +460,10 @@ status = "okay"; }; +&usbphy { + status = "okay"; +}; + &usb_otg { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index d32229b8a996..946f18705e96 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -169,6 +169,28 @@ clock-names = "timer", "pclk"; }; + usbphy: phy { + compatible = "rockchip,rk3066a-usb-phy", "rockchip,rk3288-usb-phy"; + rockchip,grf = <&grf>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + usbphy0: usb-phy0 { + #phy-cells = <0>; + reg = <0x17c>; + clocks = <&cru SCLK_OTGPHY0>; + clock-names = "phyclk"; + }; + + usbphy1: usb-phy1 { + #phy-cells = <0>; + reg = <0x188>; + clocks = <&cru SCLK_OTGPHY1>; + clock-names = "phyclk"; + }; + }; + pinctrl: pinctrl { compatible = "rockchip,rk3066a-pinctrl"; rockchip,grf = <&grf>; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 42faa19edb7e..d2180e5d2b05 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -48,6 +48,7 @@ compatible = "radxa,rock", "rockchip,rk3188"; memory { + device_type = "memory"; reg = <0x60000000 0x80000000>; }; @@ -358,6 +359,10 @@ status = "okay"; }; +&usbphy { + status = "okay"; +}; + &usb_host { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index 0f23aedf9349..316304272118 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -130,6 +130,28 @@ #reset-cells = <1>; }; + usbphy: phy { + compatible = "rockchip,rk3188-usb-phy", "rockchip,rk3288-usb-phy"; + rockchip,grf = <&grf>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + usbphy0: usb-phy0 { + #phy-cells = <0>; + reg = <0x10c>; + clocks = <&cru SCLK_OTGPHY0>; + clock-names = "phyclk"; + }; + + usbphy1: usb-phy1 { + #phy-cells = <0>; + reg = <0x11c>; + clocks = <&cru SCLK_OTGPHY1>; + clock-names = "phyclk"; + }; + }; + pinctrl: pinctrl { compatible = "rockchip,rk3188-pinctrl"; rockchip,grf = <&grf>; diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index 844a6fb64658..f6d2e7894b05 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -43,6 +43,7 @@ / { memory { + device_type = "memory"; reg = <0x0 0x80000000>; }; diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index 0b42372e4379..20fa0ef0b96b 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -44,6 +44,7 @@ / { memory { + device_type = "memory"; reg = <0 0x80000000>; }; @@ -213,6 +214,8 @@ regulator-max-microvolt = <1350000>; regulator-always-on; regulator-boot-on; + regulator-enable-ramp-delay = <300>; + regulator-ramp-delay = <8000>; vin-supply = <&vcc_sys>; }; diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts index d582811fbd7b..f82b956ebf17 100644 --- a/arch/arm/boot/dts/rk3288-popmetal.dts +++ b/arch/arm/boot/dts/rk3288-popmetal.dts @@ -49,6 +49,7 @@ compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288"; memory{ + device_type = "memory"; reg = <0 0x80000000>; }; diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts new file mode 100644 index 000000000000..14b9fc73c8a4 --- /dev/null +++ b/arch/arm/boot/dts/rk3288-r89.dts @@ -0,0 +1,413 @@ +/* + * Copyright (c) 2015 Heiko Stuebner <heiko@sntech.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include <dt-bindings/pwm/pwm.h> +#include "rk3288.dtsi" + +/ { + compatible = "netxeon,r89", "rockchip,rk3288"; + + memory { + device_type = "memory"; + reg = <0x0 0x80000000>; + }; + + ext_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + #clock-cells = <0>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&pwrbtn>; + + button@0 { + gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + linux,code = <116>; + label = "GPIO Key Power"; + linux,input-type = <1>; + gpio-key,wakeup = <1>; + debounce-interval = <100>; + }; + }; + + vcc_host: vcc-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + regulator-name = "vcc_host"; + regulator-always-on; + regulator-boot-on; + }; + + vcc_otg: vcc-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&otg_vbus_drv>; + regulator-name = "vcc_otg"; + regulator-always-on; + regulator-boot-on; + }; + + vcc_sdmmc: sdmmc-regulator { + compatible = "regulator-fixed"; + regulator-name = "sdmmc-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; + + vcc_sys: sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "sys-supply"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&cpu0 { + cpu0-supply = <&vdd_cpu>; +}; + +&gmac { + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + clock_in_out = "input"; + snps,reset-gpio = <&gpio4 7 0>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 1000000>; + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + tx_delay = <0x30>; + rx_delay = <0x10>; + status = "ok"; +}; + +&hdmi { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: pmic@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "VDD_CPU"; + regulator-enable-ramp-delay = <300>; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <8000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; + + vdd_gpu: pmic@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "VDD_GPU"; + regulator-enable-ramp-delay = <300>; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <8000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; + + rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-output-names = "xin32k"; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + }; + + act8846: pmic@5a { + compatible = "active-semi,act8846"; + reg = <0x5a>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_vsel>, <&pwr_hold>; + system-power-controller; + + regulators { + vcc_ddr: REG1 { + regulator-name = "VCC_DDR"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vcc_io: REG2 { + regulator-name = "VCC_IO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_log: REG3 { + regulator-name = "VDD_LOG"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vcc_20: REG4 { + regulator-name = "VCC_20"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + vccio_sd: REG5 { + regulator-name = "VCCIO_SD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd10_lcd: REG6 { + regulator-name = "VDD10_LCD"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vcc_wl: REG7 { + regulator-name = "VCC_WL"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vcca_33: REG8 { + regulator-name = "VCCA_33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vcc_lan: REG9 { + regulator-name = "VCC_LAN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_10: REG10 { + regulator-name = "VDD_10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vcc_18: REG11 { + regulator-name = "VCC_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc18_lcd: REG12 { + regulator-name = "VCC18_LCD"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c5 { + status = "okay"; +}; + +&pinctrl { + pcfg_output_high: pcfg-output-high { + output-high; + }; + + pcfg_output_low: pcfg-output-low { + output-low; + }; + + act8846 { + pmic_vsel: pmic-vsel { + rockchip,pins = <7 1 RK_FUNC_GPIO &pcfg_output_low>; + }; + + pwr_hold: pwr-hold { + rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; + + buttons { + pwrbtn: pwrbtn { + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + pmic { + pmic_int: pmic-int { + rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + otg_vbus_drv: otg-vbus-drv { + rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_18>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + disable-wp; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + vmmc-supply = <&vcc_sdmmc>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <0>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host1 { + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi new file mode 100644 index 000000000000..136d650dd05f --- /dev/null +++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi @@ -0,0 +1,232 @@ +/* + * Google Veyron (and derivatives) board device tree source + * Chromebook specific parts + * + * Copyright 2015 Google, Inc + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/clock/rockchip,rk808.h> +#include <dt-bindings/input/input.h> +#include "rk3288-veyron.dtsi" +#include "rk3288-veyron-sdmmc.dtsi" + +/ { + aliases { + /* Assign 20 so we don't get confused w/ builtin ones */ + i2c20 = &i2c_tunnel; + }; + + gpio-charger { + compatible = "gpio-charger"; + charger-type = "mains"; + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&ac_present_ap>; + }; + + /* A non-regulated voltage from power supply or battery */ + vccsys: vccsys { + compatible = "regulator-fixed"; + regulator-name = "vccsys"; + regulator-boot-on; + regulator-always-on; + }; + + vcc33_sys: vcc33-sys { + vin-supply = <&vccsys>; + }; + + vcc_5v: vcc-5v { + vin-supply = <&vccsys>; + }; + + /* This turns on vbus for host1 (dwc2) */ + vcc5_host1: vcc5-host1-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host1_pwr_en>; + regulator-name = "vcc5_host1"; + regulator-always-on; + regulator-boot-on; + }; + + /* This turns on vbus for otg for host mode (dwc2) */ + vcc5v_otg: vcc5v-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usbotg_pwren_h>; + regulator-name = "vcc5_host2"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&gpio_keys { + pinctrl-0 = <&pwr_key_l &ap_lid_int_l>; + lid { + label = "Lid"; + gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + gpio-key,wakeup; + linux,code = <0>; /* SW_LID */ + linux,input-type = <5>; /* EV_SW */ + debounce-interval = <1>; + }; +}; + +&rk808 { + vcc11-supply = <&vcc_5v>; + + regulators { + vcc33_ccd: LDO_REG8 { + regulator-name = "vcc33_ccd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + }; +}; + +&spi0 { + status = "okay"; + + cros_ec: ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + google,cros-ec-spi-pre-delay = <30>; + interrupt-parent = <&gpio7>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ec_int>; + spi-max-frequency = <3000000>; + + i2c_tunnel: i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + google,remote-bus = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&i2c4 { + trackpad@15 { + compatible = "elan,ekth3000"; + reg = <0x15>; + interrupt-parent = <&gpio7>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_int>; + vcc-supply = <&vcc33_io>; + wakeup-source; + }; +}; + +&pinctrl { + pinctrl-0 = < + /* Common for sleep and wake, but no owners */ + &global_pwroff + + /* Wake only */ + &suspend_l_wake + >; + pinctrl-1 = < + /* Common for sleep and wake, but no owners */ + &global_pwroff + + /* Sleep only */ + &suspend_l_sleep + >; + + buttons { + ap_lid_int_l: ap-lid-int-l { + rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + charger { + ac_present_ap: ac-present-ap { + rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + cros-ec { + ec_int: ec-int { + rockchip,pins = <7 7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + suspend { + suspend_l_wake: suspend-l-wake { + rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_output_low>; + }; + + suspend_l_sleep: suspend-l-sleep { + rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; + + trackpad { + trackpad_int: trackpad-int { + rockchip,pins = <7 3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb-host { + host1_pwr_en: host1-pwr-en { + rockchip,pins = <0 11 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usbotg_pwren_h: usbotg-pwren-h { + rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +#include "cros-ec-keyboard.dtsi" diff --git a/arch/arm/boot/dts/rk3288-veyron-jerry.dts b/arch/arm/boot/dts/rk3288-veyron-jerry.dts new file mode 100644 index 000000000000..60bd6e91e308 --- /dev/null +++ b/arch/arm/boot/dts/rk3288-veyron-jerry.dts @@ -0,0 +1,197 @@ +/* + * Google Veyron Jerry Rev 3+ board device tree source + * + * Copyright 2015 Google, Inc + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "rk3288-veyron-chromebook.dtsi" +#include "cros-ec-sbs.dtsi" + +/ { + model = "Google Jerry"; + compatible = "google,veyron-jerry-rev7", "google,veyron-jerry-rev6", + "google,veyron-jerry-rev5", "google,veyron-jerry-rev4", + "google,veyron-jerry-rev3", "google,veyron-jerry", + "google,veyron", "rockchip,rk3288"; + + panel_regulator: panel-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_enable_h>; + regulator-name = "panel_regulator"; + vin-supply = <&vcc33_sys>; + }; + + vcc18_lcd: vcc18-lcd { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&avdd_1v8_disp_en>; + regulator-name = "vcc18_lcd"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc18_wl>; + }; + + backlight_regulator: backlight-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bl_pwr_en>; + regulator-name = "backlight_regulator"; + vin-supply = <&vcc33_sys>; + startup-delay-us = <15000>; + }; +}; + +&rk808 { + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + + regulators { + mic_vcc: LDO_REG2 { + regulator-name = "mic_vcc"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; +}; + +&sdmmc { + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio + &sdmmc_bus4>; +}; + +&vcc_5v { + enable-active-high; + gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&drv_5v>; +}; + +&vcc50_hdmi { + enable-active-high; + gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc50_hdmi_en>; +}; + +&pinctrl { + backlight { + bl_pwr_en: bl_pwr_en { + rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + buck-5v { + drv_5v: drv-5v { + rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hdmi { + vcc50_hdmi_en: vcc50-hdmi-en { + rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + lcd { + lcd_enable_h: lcd-en { + rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + avdd_1v8_disp_en: avdd-1v8-disp-en { + rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + dvs_1: dvs-1 { + rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + dvs_2: dvs-2 { + rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; +}; + +&i2c4 { + status = "okay"; + + /* + * Trackpad pin control is shared between Elan and Synaptics devices + * so we have to pull it up to the bus level. + */ + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_xfer &trackpad_int>; + + trackpad@15 { + /* + * Remove the inherited pinctrl settings to avoid clashing + * with bus-wide ones. + */ + /delete-property/pinctrl-names; + /delete-property/pinctrl-0; + }; + + trackpad@2c { + compatible = "hid-over-i2c"; + interrupt-parent = <&gpio7>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + reg = <0x2c>; + hid-descr-addr = <0x0020>; + vcc-supply = <&vcc33_io>; + wakeup-source; + }; +}; diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts new file mode 100644 index 000000000000..8fd8ef2c72da --- /dev/null +++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts @@ -0,0 +1,230 @@ +/* + * Google Veyron Minnie Rev 0+ board device tree source + * + * Copyright 2015 Google, Inc + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "rk3288-veyron-chromebook.dtsi" + +/ { + model = "Google Minnie"; + compatible = "google,veyron-minnie-rev4", "google,veyron-minnie-rev3", + "google,veyron-minnie-rev2", "google,veyron-minnie-rev1", + "google,veyron-minnie-rev0", "google,veyron-minnie", + "google,veyron", "rockchip,rk3288"; + + backlight_regulator: backlight-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bl_pwr_en>; + regulator-name = "backlight_regulator"; + vin-supply = <&vcc33_sys>; + startup-delay-us = <15000>; + }; + + panel_regulator: panel-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_enable_h>; + regulator-name = "panel_regulator"; + vin-supply = <&vcc33_sys>; + }; + + vcc18_lcd: vcc18-lcd { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&avdd_1v8_disp_en>; + regulator-name = "vcc18_lcd"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc18_wl>; + }; +}; + +&gpio_keys { + pinctrl-0 = <&pwr_key_l &ap_lid_int_l &volum_down_l &volum_up_l>; + + volum_down { + label = "Volum_down"; + gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <100>; + }; + + volum_up { + label = "Volum_up"; + gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <100>; + }; +}; + +&i2c_tunnel { + battery: bq27500@55 { + compatible = "ti,bq27500"; + reg = <0x55>; + }; +}; + +&i2c3 { + status = "okay"; + + clock-frequency = <400000>; + i2c-scl-falling-time-ns = <50>; + i2c-scl-rising-time-ns = <300>; +}; + +&rk808 { + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; + + regulators { + vcc33_touch: LDO_REG2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc33_touch"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc5v_touch: SWITCH_REG2 { + regulator-name = "vcc5v_touch"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; +}; + +&sdmmc { + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio + &sdmmc_bus4>; +}; + +&vcc_5v { + enable-active-high; + gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&drv_5v>; +}; + +&vcc50_hdmi { + enable-active-high; + gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc50_hdmi_en>; +}; + +&pinctrl { + backlight { + bl_pwr_en: bl_pwr_en { + rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + buck-5v { + drv_5v: drv-5v { + rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + buttons { + volum_down_l: volum-down-l { + rockchip,pins = <5 11 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + volum_up_l: volum-up-l { + rockchip,pins = <5 10 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + hdmi { + vcc50_hdmi_en: vcc50-hdmi-en { + rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + lcd { + lcd_enable_h: lcd-en { + rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + avdd_1v8_disp_en: avdd-1v8-disp-en { + rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + dvs_1: dvs-1 { + rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + dvs_2: dvs-2 { + rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + prochot { + gpio_prochot: gpio-prochot { + rockchip,pins = <2 8 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + touchscreen { + touch_int: touch-int { + rockchip,pins = <2 14 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + touch_rst: touch-rst { + rockchip,pins = <2 15 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts new file mode 100644 index 000000000000..94b56e33d947 --- /dev/null +++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts @@ -0,0 +1,128 @@ +/* + * Google Veyron Pinky Rev 2 board device tree source + * + * Copyright 2015 Google, Inc + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "rk3288-veyron-chromebook.dtsi" +#include "cros-ec-sbs.dtsi" + +/ { + model = "Google Pinky"; + compatible = "google,veyron-pinky-rev2", "google,veyron-pinky", + "google,veyron", "rockchip,rk3288"; + + /delete-node/emmc-pwrseq; +}; + +&emmc { + /* + * Use a pullup instead of a drive since the output is 3.3V and + * really should be 1.8V (oops). The external pulldown will help + * bring the voltage down if we only drive with a pullup here. + * Therefore disable the powerseq (and actual reset) for pinky. + */ + /delete-property/mmc-pwrseq; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8 &emmc_reset>; +}; + +&gpio_keys { + pinctrl-0 = <&pwr_key_h &ap_lid_int_l>; + + power { + gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; + }; +}; + +/* Touchpad connector */ +&i2c3 { + status = "okay"; + + clock-frequency = <400000>; + i2c-scl-falling-time-ns = <50>; + i2c-scl-rising-time-ns = <300>; +}; + +&pinctrl { + buttons { + pwr_key_h: pwr-key-h { + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + emmc { + emmc_reset: emmc-reset { + rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdmmc { + sdmmc_wp_gpio: sdmmc-wp-gpio { + rockchip,pins = <7 10 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&rk808 { + regulators { + vcc18_lcd: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc18_lcd"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; +}; + +&sdmmc { + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio + &sdmmc_wp_gpio &sdmmc_bus4>; + wp-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>; +}; + +&tsadc { + /* Some connection is flaky making the tsadc hang the system */ + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi new file mode 100644 index 000000000000..b5334ecff13c --- /dev/null +++ b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi @@ -0,0 +1,122 @@ +/* + * Google Veyron (and derivatives) fragment for sdmmc cards + * + * Copyright 2015 Google, Inc + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +&io_domains { + sdcard-supply = <&vccio_sd>; +}; + +&pinctrl { + sdmmc { + /* + * We run sdmmc at max speed; bump up drive strength. + * We also have external pulls, so disable the internal ones. + */ + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_none_drv_8ma>, + <6 17 RK_FUNC_1 &pcfg_pull_none_drv_8ma>, + <6 18 RK_FUNC_1 &pcfg_pull_none_drv_8ma>, + <6 19 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; + }; + + sdmmc_clk: sdmmc-clk { + rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; + }; + + /* + * Builtin CD line is hooked to ground to prevent JTAG at boot + * (and also to get the voltage rail correct). + * Configure gpio6_C6 as GPIO so dw_mmc builtin CD doesn't + * think there's a card inserted + */ + sdmmc_cd_disabled: sdmmc-cd-disabled { + rockchip,pins = <6 22 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + /* This is where we actually hook up CD */ + sdmmc_cd_gpio: sdmmc-cd-gpio { + rockchip,pins = <7 5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&rk808 { + vcc9-supply = <&vcc_5v>; + + regulators { + vccio_sd: LDO_REG4 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc33_sd: LDO_REG5 { + regulator-name = "vcc33_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; +}; + +&sdmmc { + status = "okay"; + + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + cd-gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; + num-slots = <1>; + vmmc-supply = <&vcc33_sd>; + vqmmc-supply = <&vccio_sd>; +}; diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts new file mode 100644 index 000000000000..a7ea7d06cf7f --- /dev/null +++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts @@ -0,0 +1,155 @@ +/* + * Google Veyron Speedy Rev 1+ board device tree source + * + * Copyright 2015 Google, Inc + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "rk3288-veyron-chromebook.dtsi" +#include "cros-ec-sbs.dtsi" + +/ { + model = "Google Speedy"; + compatible = "google,veyron-speedy-rev9", "google,veyron-speedy-rev8", + "google,veyron-speedy-rev7", "google,veyron-speedy-rev6", + "google,veyron-speedy-rev5", "google,veyron-speedy-rev4", + "google,veyron-speedy-rev3", "google,veyron-speedy-rev2", + "google,veyron-speedy", "google,veyron", "rockchip,rk3288"; + + panel_regulator: panel-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_enable_h>; + regulator-name = "panel_regulator"; + vin-supply = <&vcc33_sys>; + }; + + vcc18_lcd: vcc18-lcd { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&avdd_1v8_disp_en>; + regulator-name = "vcc18_lcd"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc18_wl>; + }; + + backlight_regulator: backlight-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bl_pwr_en>; + regulator-name = "backlight_regulator"; + vin-supply = <&vcc33_sys>; + startup-delay-us = <15000>; + }; +}; + +&rk808 { + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; +}; + +&sdmmc { + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio + &sdmmc_bus4>; +}; + +&vcc_5v { + enable-active-high; + gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&drv_5v>; +}; + +&vcc50_hdmi { + enable-active-high; + gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc50_hdmi_en>; +}; + +&pinctrl { + backlight { + bl_pwr_en: bl_pwr_en { + rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + buck-5v { + drv_5v: drv-5v { + rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hdmi { + vcc50_hdmi_en: vcc50-hdmi-en { + rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + lcd { + lcd_enable_h: lcd-en { + rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + avdd_1v8_disp_en: avdd-1v8-disp-en { + rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + dvs_1: dvs-1 { + rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + dvs_2: dvs-2 { + rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; +}; diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi new file mode 100644 index 000000000000..2fa7a0dc83f7 --- /dev/null +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -0,0 +1,563 @@ +/* + * Google Veyron (and derivatives) board device tree source + * + * Copyright 2015 Google, Inc + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/clock/rockchip,rk808.h> +#include <dt-bindings/input/input.h> +#include "rk3288.dtsi" + +/ { + memory { + device_type = "memory"; + reg = <0x0 0x80000000>; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&pwr_key_l>; + power { + label = "Power"; + gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + debounce-interval = <100>; + gpio-key,wakeup; + }; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&ap_warm_reset_h>; + priority = <200>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + pinctrl-0 = <&emmc_reset>; + pinctrl-names = "default"; + reset-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>; + }; + + io_domains: io-domains { + compatible = "rockchip,rk3288-io-voltage-domain"; + rockchip,grf = <&grf>; + + bb-supply = <&vcc33_io>; + dvp-supply = <&vcc_18>; + flash0-supply = <&vcc18_flashio>; + gpio1830-supply = <&vcc33_io>; + gpio30-supply = <&vcc33_io>; + lcdc-supply = <&vcc33_lcd>; + wifi-supply = <&vcc18_wl>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 RK808_CLKOUT1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_enable_l>, <&wifi_enable_h>; + + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; + }; + + vcc_5v: vcc-5v { + compatible = "regulator-fixed"; + regulator-name = "vcc_5v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc33_sys: vcc33-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc33_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc50_hdmi: vcc50-hdmi { + compatible = "regulator-fixed"; + regulator-name = "vcc50_hdmi"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_5v>; + }; +}; + +&cpu0 { + cpu0-supply = <&vdd_cpu>; +}; + +&emmc { + status = "okay"; + + broken-cd; + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + mmc-pwrseq = <&emmc_pwrseq>; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; +}; + +&hdmi { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + clock-frequency = <400000>; + i2c-scl-falling-time-ns = <50>; /* 2.5ns measured */ + i2c-scl-rising-time-ns = <100>; /* 45ns measured */ + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + clock-output-names = "xin32k", "wifibt_32kin"; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + + vcc1-supply = <&vcc33_sys>; + vcc2-supply = <&vcc33_sys>; + vcc3-supply = <&vcc33_sys>; + vcc4-supply = <&vcc33_sys>; + vcc6-supply = <&vcc_5v>; + vcc7-supply = <&vcc33_sys>; + vcc8-supply = <&vcc33_sys>; + vcc12-supply = <&vcc_18>; + vddio-supply = <&vcc33_io>; + + regulators { + vdd_cpu: DCDC_REG1 { + regulator-name = "vdd_arm"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1450000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1250000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc135_ddr: DCDC_REG3 { + regulator-name = "vcc135_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + /* + * vcc_18 has several aliases. (vcc18_flashio and + * vcc18_wl). We'll add those aliases here just to + * make it easier to follow the schematic. The signals + * are actually hooked together and only separated for + * power measurement purposes). + */ + vcc18_wl: vcc18_flashio: vcc_18: DCDC_REG4 { + regulator-name = "vcc_18"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + /* + * Note that both vcc33_io and vcc33_pmuio are always + * powered together. To simplify the logic in the dts + * we just refer to vcc33_io every time something is + * powered from vcc33_pmuio. In fact, on later boards + * (such as danger) they're the same net. + */ + vcc33_io: LDO_REG1 { + regulator-name = "vcc33_io"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd_10: LDO_REG3 { + regulator-name = "vdd_10"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vdd10_lcd_pwren_h: LDO_REG7 { + regulator-name = "vdd10_lcd_pwren_h"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc33_lcd: SWITCH_REG1 { + regulator-name = "vcc33_lcd"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&i2c1 { + status = "okay"; + + clock-frequency = <400000>; + i2c-scl-falling-time-ns = <50>; /* 2.5ns measured */ + i2c-scl-rising-time-ns = <100>; /* 40ns measured */ + + tpm: tpm@20 { + compatible = "infineon,slb9645tt"; + reg = <0x20>; + powered-while-suspended; + }; +}; + +&i2c2 { + status = "okay"; + + /* 100kHz since 4.7k resistors don't rise fast enough */ + clock-frequency = <100000>; + i2c-scl-falling-time-ns = <50>; /* 10ns measured */ + i2c-scl-rising-time-ns = <800>; /* 600ns measured */ +}; + +&i2c4 { + status = "okay"; + + clock-frequency = <400000>; + i2c-scl-falling-time-ns = <50>; /* 11ns measured */ + i2c-scl-rising-time-ns = <300>; /* 225ns measured */ +}; + +&i2c5 { + status = "okay"; + + clock-frequency = <100000>; + i2c-scl-falling-time-ns = <300>; + i2c-scl-rising-time-ns = <1000>; +}; + +&pwm1 { + status = "okay"; +}; + +&sdio0 { + status = "okay"; + + broken-cd; + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_clk &sdio0_cmd &sdio0_bus4>; + vmmc-supply = <&vcc33_sys>; + vqmmc-supply = <&vcc18_wl>; +}; + +&spi2 { + status = "okay"; + + rx-sample-delay-ns = <12>; +}; + +&tsadc { + status = "okay"; + + rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */ +}; + +&uart0 { + status = "okay"; + + /* We need to go faster than 24MHz, so adjust clock parents / rates */ + assigned-clocks = <&cru SCLK_UART0>; + assigned-clock-rates = <48000000>; + + /* Pins don't include flow control by default; add that in */ + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; + + needs-reset-on-resume; +}; + +&usb_host1 { + status = "okay"; +}; + +&usb_otg { + status = "okay"; + + assigned-clocks = <&cru SCLK_USBPHY480M_SRC>; + assigned-clock-parents = <&cru SCLK_OTGPHY0>; + dr_mode = "host"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default", "sleep"; + pinctrl-0 = < + /* Common for sleep and wake, but no owners */ + &global_pwroff + >; + pinctrl-1 = < + /* Common for sleep and wake, but no owners */ + &global_pwroff + >; + + pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { + bias-disable; + drive-strength = <8>; + }; + + pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { + bias-pull-up; + drive-strength = <8>; + }; + + pcfg_output_high: pcfg-output-high { + output-high; + }; + + pcfg_output_low: pcfg-output-low { + output-low; + }; + + buttons { + pwr_key_l: pwr-key-l { + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + emmc { + emmc_reset: emmc-reset { + rockchip,pins = <2 9 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + /* + * We run eMMC at max speed; bump up drive strength. + * We also have external pulls, so disable the internal ones. + */ + emmc_clk: emmc-clk { + rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none_drv_8ma>; + }; + + emmc_cmd: emmc-cmd { + rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_none_drv_8ma>; + }; + + emmc_bus8: emmc-bus8 { + rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, + <3 1 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, + <3 2 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, + <3 3 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, + <3 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, + <3 5 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, + <3 6 RK_FUNC_2 &pcfg_pull_none_drv_8ma>, + <3 7 RK_FUNC_2 &pcfg_pull_none_drv_8ma>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + reboot { + ap_warm_reset_h: ap-warm-reset-h { + rockchip,pins = <RK_GPIO0 13 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + recovery-switch { + rec_mode_l: rec-mode-l { + rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdio0 { + wifi_enable_h: wifienable-h { + rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + /* NOTE: mislabelled on schematic; should be bt_enable_h */ + bt_enable_l: bt-enable-l { + rockchip,pins = <4 29 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + /* + * We run sdio0 at max speed; bump up drive strength. + * We also have external pulls, so disable the internal ones. + */ + sdio0_bus4: sdio0-bus4 { + rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>, + <4 21 RK_FUNC_1 &pcfg_pull_none_drv_8ma>, + <4 22 RK_FUNC_1 &pcfg_pull_none_drv_8ma>, + <4 23 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; + }; + + sdio0_cmd: sdio0-cmd { + rockchip,pins = <4 24 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; + }; + + sdio0_clk: sdio0-clk { + rockchip,pins = <4 25 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; + }; + }; + + tpm { + tpm_int_h: tpm-int-h { + rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + /* + * On Marvell-based hardware this is a no-connect. Make sure we enable + * the pullup so that the line doesn't float. The pullup shouldn't + * hurt on Broadcom-based hardware since the other side is actively + * driving this signal. As proof: we've already got a pullup on RX. + */ + uart0 { + uart0_cts: uart0-cts { + rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + + write-protect { + fw_wp_ap: fw-wp-ap { + rockchip,pins = <7 6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 22316d00493e..906e938fb6bf 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -78,6 +78,7 @@ <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; }; cpus { @@ -110,19 +111,19 @@ clock-latency = <40000>; clocks = <&cru ARMCLK>; }; - cpu@501 { + cpu1: cpu@501 { device_type = "cpu"; compatible = "arm,cortex-a12"; reg = <0x501>; resets = <&cru SRST_CORE1>; }; - cpu@502 { + cpu2: cpu@502 { device_type = "cpu"; compatible = "arm,cortex-a12"; reg = <0x502>; resets = <&cru SRST_CORE2>; }; - cpu@503 { + cpu3: cpu@503 { device_type = "cpu"; compatible = "arm,cortex-a12"; reg = <0x503>; @@ -168,6 +169,26 @@ }; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* + * The rk3288 cannot use the memory area above 0xfe000000 + * for dma operations for some reason. While there is + * probably a better solution available somewhere, we + * haven't found it yet and while devices with 2GB of ram + * are not affected, this issue prevents 4GB from booting. + * So to make these devices at least bootable, block + * this area for the time being until the real solution + * is found. + */ + dma-unusable@fe000000 { + reg = <0xfe000000 0x1000000>; + }; + }; + xin24m: oscillator { compatible = "fixed-clock"; clock-frequency = <24000000>; @@ -447,6 +468,8 @@ "mac_clk_rx", "mac_clk_tx", "clk_mac_ref", "clk_mac_refout", "aclk_mac", "pclk_mac"; + resets = <&cru SRST_MAC>; + reset-names = "stmmaceth"; status = "disabled"; }; @@ -626,7 +649,7 @@ compatible = "rockchip,rk3288-wdt", "snps,dw-wdt"; reg = <0xff800000 0x100>; clocks = <&cru PCLK_WDT>; - interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index a2ae9f32464d..4497d288a7cb 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -172,6 +172,13 @@ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_OTG0>; clock-names = "otg"; + dr_mode = "otg"; + g-np-tx-fifo-size = <16>; + g-rx-fifo-size = <275>; + g-tx-fifo-size = <256 128 128 64 64 32>; + g-use-dma; + phys = <&usbphy0>; + phy-names = "usb2-phy"; status = "disabled"; }; @@ -181,6 +188,9 @@ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_OTG1>; clock-names = "otg"; + dr_mode = "host"; + phys = <&usbphy1>; + phy-names = "usb2-phy"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi new file mode 100644 index 000000000000..034cd48ae28b --- /dev/null +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -0,0 +1,926 @@ +/* + * sama5d2.dtsi - Device Tree Include file for SAMA5D2 family SoC + * + * Copyright (C) 2015 Atmel, + * 2015 Ludovic Desroches <ludovic.desroches@atmel.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "skeleton.dtsi" +#include <dt-bindings/dma/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/clock/at91.h> + +/ { + model = "Atmel SAMA5D2 family SoC"; + compatible = "atmel,sama5d2"; + interrupt-parent = <&aic>; + + aliases { + serial0 = &uart1; + serial1 = &uart3; + tcb0 = &tcb0; + tcb1 = &tcb1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a5"; + reg = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + reg = <0x20000000 0x20000000>; + }; + + clocks { + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + adc_op_clk: adc_op_clk{ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + }; + }; + + ns_sram: sram@00200000 { + compatible = "mmio-sram"; + reg = <0x00200000 0x20000>; + }; + + ahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usb0: gadget@00300000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,sama5d3-udc"; + reg = <0x00300000 0x100000 + 0xfc02c000 0x400>; + interrupts = <42 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&udphs_clk>, <&utmi>; + clock-names = "pclk", "hclk"; + status = "disabled"; + + ep0 { + reg = <0>; + atmel,fifo-size = <64>; + atmel,nb-banks = <1>; + }; + + ep1 { + reg = <1>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep2 { + reg = <2>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep3 { + reg = <3>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep4 { + reg = <4>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep5 { + reg = <5>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep6 { + reg = <6>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep7 { + reg = <7>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep8 { + reg = <8>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-isoc; + }; + + ep9 { + reg = <9>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-isoc; + }; + + ep10 { + reg = <10>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-isoc; + }; + + ep11 { + reg = <11>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-isoc; + }; + + ep12 { + reg = <12>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-isoc; + }; + + ep13 { + reg = <13>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-isoc; + }; + + ep14 { + reg = <14>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-isoc; + }; + + ep15 { + reg = <15>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-isoc; + }; + }; + + usb1: ohci@00400000 { + compatible = "atmel,at91rm9200-ohci", "usb-ohci"; + reg = <0x00400000 0x100000>; + interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clock-names = "ohci_clk", "hclk", "uhpck"; + status = "disabled"; + }; + + usb2: ehci@00500000 { + compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; + reg = <0x00500000 0x100000>; + interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&utmi>, <&uhphs_clk>; + clock-names = "usb_clk", "ehci_clk"; + status = "disabled"; + }; + + L2: cache-controller@00a00000 { + compatible = "arm,pl310-cache"; + reg = <0x00a00000 0x1000>; + interrupts = <63 IRQ_TYPE_LEVEL_HIGH 4>; + cache-unified; + cache-level = <2>; + }; + + apb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ramc0: ramc@f000c000 { + compatible = "atmel,sama5d3-ddramc"; + reg = <0xf000c000 0x200>; + clocks = <&ddrck>, <&mpddr_clk>; + clock-names = "ddrck", "mpddr"; + }; + + dma0: dma-controller@f0010000 { + compatible = "atmel,sama5d4-dma"; + reg = <0xf0010000 0x1000>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>; + #dma-cells = <1>; + clocks = <&dma0_clk>; + clock-names = "dma_clk"; + }; + + pmc: pmc@f0014000 { + compatible = "atmel,sama5d2-pmc"; + reg = <0xf0014000 0x160>; + interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + main_rc_osc: main_rc_osc { + compatible = "atmel,at91sam9x5-clk-main-rc-osc"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_MOSCRCS>; + clock-frequency = <12000000>; + clock-accuracy = <100000000>; + }; + + main_osc: main_osc { + compatible = "atmel,at91rm9200-clk-main-osc"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_MOSCS>; + clocks = <&main_xtal>; + }; + + main: mainck { + compatible = "atmel,at91sam9x5-clk-main"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_MOSCSELS>; + clocks = <&main_rc_osc &main_osc>; + }; + + plla: pllack { + compatible = "atmel,sama5d3-clk-pll"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_LOCKA>; + clocks = <&main>; + reg = <0>; + atmel,clk-input-range = <12000000 12000000>; + #atmel,pll-clk-output-range-cells = <4>; + atmel,pll-clk-output-ranges = <600000000 1200000000 0 0>; + }; + + plladiv: plladivck { + compatible = "atmel,at91sam9x5-clk-plldiv"; + #clock-cells = <0>; + clocks = <&plla>; + }; + + utmi: utmick { + compatible = "atmel,at91sam9x5-clk-utmi"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_LOCKU>; + clocks = <&main>; + }; + + mck: masterck { + compatible = "atmel,at91sam9x5-clk-master"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_MCKRDY>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>; + atmel,clk-output-range = <124000000 166000000>; + atmel,clk-divisors = <1 2 4 3>; + }; + + h32ck: h32mxck { + #clock-cells = <0>; + compatible = "atmel,sama5d4-clk-h32mx"; + clocks = <&mck>; + }; + + usb: usbck { + compatible = "atmel,at91sam9x5-clk-usb"; + #clock-cells = <0>; + clocks = <&plladiv>, <&utmi>; + }; + + prog: progck { + compatible = "atmel,at91sam9x5-clk-programmable"; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&pmc>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>; + + prog0: prog0 { + #clock-cells = <0>; + reg = <0>; + interrupts = <AT91_PMC_PCKRDY(0)>; + }; + + prog1: prog1 { + #clock-cells = <0>; + reg = <1>; + interrupts = <AT91_PMC_PCKRDY(1)>; + }; + + prog2: prog2 { + #clock-cells = <0>; + reg = <2>; + interrupts = <AT91_PMC_PCKRDY(2)>; + }; + }; + + systemck { + compatible = "atmel,at91rm9200-clk-system"; + #address-cells = <1>; + #size-cells = <0>; + + ddrck: ddrck { + #clock-cells = <0>; + reg = <2>; + clocks = <&mck>; + }; + + lcdck: lcdck { + #clock-cells = <0>; + reg = <3>; + clocks = <&mck>; + }; + + uhpck: uhpck { + #clock-cells = <0>; + reg = <6>; + clocks = <&usb>; + }; + + udpck: udpck { + #clock-cells = <0>; + reg = <7>; + clocks = <&usb>; + }; + + pck0: pck0 { + #clock-cells = <0>; + reg = <8>; + clocks = <&prog0>; + }; + + pck1: pck1 { + #clock-cells = <0>; + reg = <9>; + clocks = <&prog1>; + }; + + pck2: pck2 { + #clock-cells = <0>; + reg = <10>; + clocks = <&prog2>; + }; + + iscck: iscck { + #clock-cells = <0>; + reg = <18>; + clocks = <&mck>; + }; + }; + + periph32ck { + compatible = "atmel,at91sam9x5-clk-peripheral"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&h32ck>; + + macb0_clk: macb0_clk { + #clock-cells = <0>; + reg = <5>; + atmel,clk-output-range = <0 83000000>; + }; + + tdes_clk: tdes_clk { + #clock-cells = <0>; + reg = <11>; + atmel,clk-output-range = <0 83000000>; + }; + + matrix1_clk: matrix1_clk { + #clock-cells = <0>; + reg = <14>; + }; + + hsmc_clk: hsmc_clk { + #clock-cells = <0>; + reg = <17>; + }; + + pioA_clk: pioA_clk { + #clock-cells = <0>; + reg = <18>; + atmel,clk-output-range = <0 83000000>; + }; + + flx0_clk: flx0_clk { + #clock-cells = <0>; + reg = <19>; + atmel,clk-output-range = <0 83000000>; + }; + + flx1_clk: flx1_clk { + #clock-cells = <0>; + reg = <20>; + atmel,clk-output-range = <0 83000000>; + }; + + flx2_clk: flx2_clk { + #clock-cells = <0>; + reg = <21>; + atmel,clk-output-range = <0 83000000>; + }; + + flx3_clk: flx3_clk { + #clock-cells = <0>; + reg = <22>; + atmel,clk-output-range = <0 83000000>; + }; + + flx4_clk: flx4_clk { + #clock-cells = <0>; + reg = <23>; + atmel,clk-output-range = <0 83000000>; + }; + + uart0_clk: uart0_clk { + #clock-cells = <0>; + reg = <24>; + atmel,clk-output-range = <0 83000000>; + }; + + uart1_clk: uart1_clk { + #clock-cells = <0>; + reg = <25>; + atmel,clk-output-range = <0 83000000>; + }; + + uart2_clk: uart2_clk { + #clock-cells = <0>; + reg = <26>; + atmel,clk-output-range = <0 83000000>; + }; + + uart3_clk: uart3_clk { + #clock-cells = <0>; + reg = <27>; + atmel,clk-output-range = <0 83000000>; + }; + + uart4_clk: uart4_clk { + #clock-cells = <0>; + reg = <28>; + atmel,clk-output-range = <0 83000000>; + }; + + twi0_clk: twi0_clk { + reg = <29>; + #clock-cells = <0>; + atmel,clk-output-range = <0 83000000>; + }; + + twi1_clk: twi1_clk { + #clock-cells = <0>; + reg = <30>; + atmel,clk-output-range = <0 83000000>; + }; + + spi0_clk: spi0_clk { + #clock-cells = <0>; + reg = <33>; + atmel,clk-output-range = <0 83000000>; + }; + + spi1_clk: spi1_clk { + #clock-cells = <0>; + reg = <34>; + atmel,clk-output-range = <0 83000000>; + }; + + tcb0_clk: tcb0_clk { + #clock-cells = <0>; + reg = <35>; + atmel,clk-output-range = <0 83000000>; + }; + + tcb1_clk: tcb1_clk { + #clock-cells = <0>; + reg = <36>; + atmel,clk-output-range = <0 83000000>; + }; + + pwm_clk: pwm_clk { + #clock-cells = <0>; + reg = <38>; + atmel,clk-output-range = <0 83000000>; + }; + + adc_clk: adc_clk { + #clock-cells = <0>; + reg = <40>; + atmel,clk-output-range = <0 83000000>; + }; + + uhphs_clk: uhphs_clk { + #clock-cells = <0>; + reg = <41>; + atmel,clk-output-range = <0 83000000>; + }; + + udphs_clk: udphs_clk { + #clock-cells = <0>; + reg = <42>; + atmel,clk-output-range = <0 83000000>; + }; + + ssc0_clk: ssc0_clk { + #clock-cells = <0>; + reg = <43>; + atmel,clk-output-range = <0 83000000>; + }; + + ssc1_clk: ssc1_clk { + #clock-cells = <0>; + reg = <44>; + atmel,clk-output-range = <0 83000000>; + }; + + trng_clk: trng_clk { + #clock-cells = <0>; + reg = <47>; + atmel,clk-output-range = <0 83000000>; + }; + + classd_clk: classd_clk { + #clock-cells = <0>; + reg = <59>; + atmel,clk-output-range = <0 83000000>; + }; + }; + + periph64ck { + compatible = "atmel,at91sam9x5-clk-peripheral"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mck>; + + dma0_clk: dma0_clk { + #clock-cells = <0>; + reg = <6>; + }; + + dma1_clk: dma1_clk { + #clock-cells = <0>; + reg = <7>; + }; + + aes_clk: aes_clk { + #clock-cells = <0>; + reg = <9>; + }; + + aesb_clk: aesb_clk { + #clock-cells = <0>; + reg = <10>; + }; + + sha_clk: sha_clk { + #clock-cells = <0>; + reg = <12>; + }; + + mpddr_clk: mpddr_clk { + #clock-cells = <0>; + reg = <13>; + }; + + matrix0_clk: matrix0_clk { + #clock-cells = <0>; + reg = <15>; + }; + + sdmmc0_hclk: sdmmc0_hclk { + #clock-cells = <0>; + reg = <31>; + }; + + sdmmc1_hclk: sdmmc1_hclk { + #clock-cells = <0>; + reg = <32>; + }; + + lcdc_clk: lcdc_clk { + #clock-cells = <0>; + reg = <45>; + }; + + isc_clk: isc_clk { + #clock-cells = <0>; + reg = <46>; + }; + + qspi0_clk: qspi0_clk { + #clock-cells = <0>; + reg = <52>; + }; + + qspi1_clk: qspi1_clk { + #clock-cells = <0>; + reg = <53>; + }; + }; + }; + + sha@f0028000 { + compatible = "atmel,at91sam9g46-sha"; + reg = <0xf0028000 0x100>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(30))>; + dma-names = "tx"; + clocks = <&sha_clk>; + clock-names = "sha_clk"; + status = "disabled"; + }; + + aes@f002c000 { + compatible = "atmel,at91sam9g46-aes"; + reg = <0xf002c000 0x100>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(26))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(27))>; + dma-names = "tx", "rx"; + clocks = <&aes_clk>; + clock-names = "aes_clk"; + status = "disabled"; + }; + + spi0: spi@f8000000 { + compatible = "atmel,at91rm9200-spi"; + reg = <0xf8000000 0x100>; + interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(6))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(7))>; + dma-names = "tx", "rx"; + clocks = <&spi0_clk>; + clock-names = "spi_clk"; + atmel,fifo-size = <16>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + macb0: ethernet@f8008000 { + compatible = "atmel,sama5d2-gem"; + reg = <0xf8008000 0x1000>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 3 /* Queue 0 */ + 66 IRQ_TYPE_LEVEL_HIGH 3 /* Queue 1 */ + 67 IRQ_TYPE_LEVEL_HIGH 3>; /* Queue 2 */ + #address-cells = <1>; + #size-cells = <0>; + clocks = <&macb0_clk>, <&macb0_clk>; + clock-names = "hclk", "pclk"; + status = "disabled"; + }; + + tcb0: timer@f800c000 { + compatible = "atmel,at91sam9x5-tcb"; + reg = <0xf800c000 0x100>; + interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tcb0_clk>, <&clk32k>; + clock-names = "t0_clk", "slow_clk"; + }; + + tcb1: timer@f8010000 { + compatible = "atmel,at91sam9x5-tcb"; + reg = <0xf8010000 0x100>; + interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tcb1_clk>, <&clk32k>; + clock-names = "t0_clk", "slow_clk"; + }; + + uart0: serial@f801c000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf801c000 0x100>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&uart0_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + uart1: serial@f8020000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8020000 0x100>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&uart1_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + uart2: serial@f8024000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8024000 0x100>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&uart2_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + i2c0: i2c@f8028000 { + compatible = "atmel,sama5d2-i2c"; + reg = <0xf8028000 0x100>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(0))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(1))>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&twi0_clk>; + status = "disabled"; + }; + + pit: timer@f8048030 { + compatible = "atmel,at91sam9260-pit"; + reg = <0xf8048030 0x10>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>; + clocks = <&h32ck>; + }; + + sckc@f8048050 { + compatible = "atmel,at91sam9x5-sckc"; + reg = <0xf8048050 0x4>; + + slow_rc_osc: slow_rc_osc { + compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-accuracy = <250000000>; + atmel,startup-time-usec = <75>; + }; + + slow_osc: slow_osc { + compatible = "atmel,at91sam9x5-clk-slow-osc"; + #clock-cells = <0>; + clocks = <&slow_xtal>; + atmel,startup-time-usec = <1200000>; + }; + + clk32k: slowck { + compatible = "atmel,at91sam9x5-clk-slow"; + #clock-cells = <0>; + clocks = <&slow_rc_osc &slow_osc>; + }; + }; + + rtc@f80480b0 { + compatible = "atmel,at91rm9200-rtc"; + reg = <0xf80480b0 0x30>; + interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; + }; + + spi1: spi@fc000000 { + compatible = "atmel,at91rm9200-spi"; + reg = <0xfc000000 0x100>; + interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(8))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(9))>; + dma-names = "tx", "rx"; + clocks = <&spi1_clk>; + clock-names = "spi_clk"; + atmel,fifo-size = <16>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart3: serial@fc008000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfc008000 0x100>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&uart3_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + uart4: serial@fc00c000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfc00c000 0x100>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&uart4_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + aic: interrupt-controller@fc020000 { + #interrupt-cells = <3>; + compatible = "atmel,sama5d2-aic"; + interrupt-controller; + reg = <0xfc020000 0x200>; + atmel,external-irqs = <49>; + }; + + i2c1: i2c@fc028000 { + compatible = "atmel,sama5d2-i2c"; + reg = <0xfc028000 0x100>; + interrupts = <30 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(2))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(3))>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&twi1_clk>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 9e2444b07bce..7fa276515f11 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -145,8 +145,8 @@ compatible = "atmel,at91sam9x5-tcb"; reg = <0xf0010000 0x100>; interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb0_clk>; - clock-names = "t0_clk"; + clocks = <&tcb0_clk>, <&clk32k>; + clock-names = "t0_clk", "slow_clk"; }; i2c0: i2c@f0014000 { @@ -1259,13 +1259,15 @@ }; rstc@fffffe00 { - compatible = "atmel,at91sam9g45-rstc"; + compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc"; reg = <0xfffffe00 0x10>; + clocks = <&clk32k>; }; shutdown-controller@fffffe10 { compatible = "atmel,at91sam9x5-shdwc"; reg = <0xfffffe10 0x10>; + clocks = <&clk32k>; }; pit: timer@fffffe30 { @@ -1279,6 +1281,7 @@ compatible = "atmel,at91sam9260-wdt"; reg = <0xfffffe40 0x10>; interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; @@ -1315,6 +1318,7 @@ compatible = "atmel,at91rm9200-rtc"; reg = <0xfffffeb0 0x30>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; }; }; diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi index f7fa58fe09f1..801f9745e82f 100644 --- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi +++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi @@ -31,8 +31,8 @@ compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8014000 0x100>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb1_clk>; - clock-names = "t0_clk"; + clocks = <&tcb1_clk>, <&clk32k>; + clock-names = "t0_clk", "slow_clk"; }; }; }; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 3ee22ee13c5a..8d1de29e8da1 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -957,8 +957,8 @@ compatible = "atmel,at91sam9x5-tcb"; reg = <0xf801c000 0x100>; interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb0_clk>; - clock-names = "t0_clk"; + clocks = <&tcb0_clk>, <&clk32k>; + clock-names = "t0_clk", "slow_clk"; }; macb0: ethernet@f8020000 { @@ -1185,29 +1185,20 @@ compatible = "atmel,at91sam9x5-tcb"; reg = <0xfc020000 0x100>; interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&tcb1_clk>; - clock-names = "t0_clk"; + clocks = <&tcb1_clk>, <&clk32k>; + clock-names = "t0_clk", "slow_clk"; }; adc0: adc@fc034000 { compatible = "atmel,at91sam9x5-adc"; reg = <0xfc034000 0x100>; interrupts = <44 IRQ_TYPE_LEVEL_HIGH 5>; - pinctrl-names = "default"; - pinctrl-0 = < - /* external trigger is conflict with USBA_VBUS */ - &pinctrl_adc0_ad0 - &pinctrl_adc0_ad1 - &pinctrl_adc0_ad2 - &pinctrl_adc0_ad3 - &pinctrl_adc0_ad4 - >; clocks = <&adc_clk>, <&adc_op_clk>; clock-names = "adc_clk", "adc_op_clk"; atmel,adc-channels-used = <0x01f>; atmel,adc-startup-time = <40>; - atmel,adc-use-external; + atmel,adc-use-external-triggers; atmel,adc-vref = <3000>; atmel,adc-res = <8 10>; atmel,adc-sample-hold-time = <11>; @@ -1277,13 +1268,15 @@ }; rstc@fc068600 { - compatible = "atmel,at91sam9g45-rstc"; + compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc"; reg = <0xfc068600 0x10>; + clocks = <&clk32k>; }; shdwc@fc068610 { compatible = "atmel,at91sam9x5-shdwc"; reg = <0xfc068610 0x10>; + clocks = <&clk32k>; }; pit: timer@fc068630 { @@ -1296,6 +1289,7 @@ watchdog@fc068640 { compatible = "atmel,at91sam9260-wdt"; reg = <0xfc068640 0x10>; + clocks = <&clk32k>; status = "disabled"; }; @@ -1329,6 +1323,7 @@ compatible = "atmel,at91rm9200-rtc"; reg = <0xfc0686b0 0x30>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; }; dbgu: serial@fc069000 { diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index 11e17c5f26e2..ff7c8f298f30 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -392,6 +392,9 @@ <0xe605801c 0x1c>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = + <&pfc 0 0 119>, <&pfc 128 128 37>, <&pfc 192 192 91>, + <&pfc 288 288 22>; interrupts-extended = <&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>, <&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>, diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 80f924deed37..314e589cfa00 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -164,7 +164,7 @@ dbg_base_clk: dbg_base_clk { #clock-cells = <0>; compatible = "altr,socfpga-perip-clk"; - clocks = <&main_pll>; + clocks = <&main_pll>, <&osc1>; div-reg = <0xe8 0 9>; reg = <0x50>; }; @@ -318,7 +318,7 @@ l3_sp_clk: l3_sp_clk { #clock-cells = <0>; compatible = "altr,socfpga-gate-clk"; - clocks = <&mainclk>; + clocks = <&l3_mp_clk>; div-reg = <0x64 2 2>; }; @@ -349,7 +349,7 @@ dbg_clk: dbg_clk { #clock-cells = <0>; compatible = "altr,socfpga-gate-clk"; - clocks = <&dbg_base_clk>; + clocks = <&dbg_at_clk>; div-reg = <0x68 2 2>; clk-gate = <0x60 5>; }; @@ -481,8 +481,37 @@ clocks = <&f2s_periph_ref_clk>, <&main_qspi_clk>, <&per_qspi_clk>; clk-gate = <0xa0 11>; }; + + ddr_dqs_clk_gate: ddr_dqs_clk_gate { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&ddr_dqs_clk>; + clk-gate = <0xd8 0>; + }; + + ddr_2x_dqs_clk_gate: ddr_2x_dqs_clk_gate { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&ddr_2x_dqs_clk>; + clk-gate = <0xd8 1>; + }; + + ddr_dq_clk_gate: ddr_dq_clk_gate { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&ddr_dq_clk>; + clk-gate = <0xd8 2>; + }; + + h2f_user2_clk: h2f_user2_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&h2f_usr2_clk>; + clk-gate = <0xd8 3>; + }; + }; - }; + }; gmac0: ethernet@ff700000 { compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac"; @@ -565,7 +594,7 @@ #size-cells = <0>; compatible = "snps,dw-apb-gpio"; reg = <0xff708000 0x1000>; - clocks = <&per_base_clk>; + clocks = <&l4_mp_clk>; status = "disabled"; porta: gpio-controller@0 { @@ -585,7 +614,7 @@ #size-cells = <0>; compatible = "snps,dw-apb-gpio"; reg = <0xff709000 0x1000>; - clocks = <&per_base_clk>; + clocks = <&l4_mp_clk>; status = "disabled"; portb: gpio-controller@0 { @@ -605,7 +634,7 @@ #size-cells = <0>; compatible = "snps,dw-apb-gpio"; reg = <0xff70a000 0x1000>; - clocks = <&per_base_clk>; + clocks = <&l4_mp_clk>; status = "disabled"; portc: gpio-controller@0 { @@ -639,6 +668,8 @@ cache-level = <2>; arm,tag-latency = <1 1 1>; arm,data-latency = <2 1 1>; + prefetch-data = <1>; + prefetch-instr = <1>; }; mmc: dwmmc0@ff704000 { @@ -752,6 +783,7 @@ #reset-cells = <1>; compatible = "altr,rst-mgr"; reg = <0xffd05000 0x1000>; + altr,modrst-offset = <0x10>; }; usbphy0: usbphy@0 { diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index 4779b07310df..2340fcb2b535 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -16,11 +16,17 @@ #include "skeleton.dtsi" #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/altr,rst-mgr-a10.h> / { #address-cells = <1>; #size-cells = <1>; + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -409,6 +415,8 @@ rx-fifo-depth = <16384>; clocks = <&l4_mp_clk>; clock-names = "stmmaceth"; + resets = <&rst EMAC0_RESET>; + reset-names = "stmmaceth"; status = "disabled"; }; @@ -426,6 +434,8 @@ rx-fifo-depth = <16384>; clocks = <&l4_mp_clk>; clock-names = "stmmaceth"; + resets = <&rst EMAC1_RESET>; + reset-names = "stmmaceth"; status = "disabled"; }; @@ -588,6 +598,7 @@ #reset-cells = <1>; compatible = "altr,rst-mgr"; reg = <0xffd05000 0x100>; + altr,modrst-offset = <0x20>; }; scu: snoop-control-unit@ffffc000 { diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi index 94a0709b2fe6..99aa9a1c8af0 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi @@ -21,7 +21,8 @@ compatible = "altr,socfpga-arria10", "altr,socfpga"; chosen { - bootargs = "console=ttyS0,115200 rootwait"; + bootargs = "earlyprintk"; + stdout-path = "serial1:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts index ccaf41742fc3..a75a666032b2 100644 --- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts @@ -22,7 +22,8 @@ compatible = "altr,socfpga-arria5", "altr,socfpga"; chosen { - bootargs = "console=ttyS0,115200"; + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts new file mode 100644 index 000000000000..555e9caf21e1 --- /dev/null +++ b/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts @@ -0,0 +1,111 @@ +/* + * Copyright Altera Corporation (C) 2015. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "socfpga_cyclone5.dtsi" + +/ { + model = "Terasic DE-0(Atlas)"; + compatible = "altr,socfpga-cyclone5", "altr,socfpga"; + + chosen { + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; + }; + + memory { + name = "memory"; + device_type = "memory"; + reg = <0x0 0x40000000>; /* 1GB */ + }; + + aliases { + ethernet0 = &gmac1; + }; + + regulator_3_3v: 3-3-v-regulator { + compatible = "regulator-fixed"; + regulator-name = "3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + leds { + compatible = "gpio-leds"; + hps0 { + label = "hps_led0"; + gpios = <&portb 24 0>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&gmac1 { + status = "okay"; + phy-mode = "rgmii"; + + txd0-skew-ps = <0>; /* -420ps */ + txd1-skew-ps = <0>; /* -420ps */ + txd2-skew-ps = <0>; /* -420ps */ + txd3-skew-ps = <0>; /* -420ps */ + rxd0-skew-ps = <420>; /* 0ps */ + rxd1-skew-ps = <420>; /* 0ps */ + rxd2-skew-ps = <420>; /* 0ps */ + rxd3-skew-ps = <420>; /* 0ps */ + txen-skew-ps = <0>; /* -420ps */ + txc-skew-ps = <1860>; /* 960ps */ + rxdv-skew-ps = <420>; /* 0ps */ + rxc-skew-ps = <1680>; /* 780ps */ + + max-frame-size = <3800>; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + speed-mode = <0>; + + adxl345: adxl345@0 { + compatible = "adi,adxl345"; + reg = <0x53>; + + interrupt-parent = <&portc>; + interrupts = <3 2>; + }; +}; + +&mmc0 { + vmmc-supply = <®ulator_3_3v>; + vqmmc-supply = <®ulator_3_3v>; +}; + +&uart0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts index 258865da8f6a..d4d0a28fb331 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts @@ -22,7 +22,8 @@ compatible = "altr,socfpga-cyclone5", "altr,socfpga"; chosen { - bootargs = "console=ttyS0,115200"; + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts index 5e17fd147728..48bf651bd762 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts @@ -22,7 +22,8 @@ compatible = "altr,socfpga-cyclone5", "altr,socfpga"; chosen { - bootargs = "console=ttyS0,115200"; + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi index e65744fc12ab..ad45f5e8fac7 100644 --- a/arch/arm/boot/dts/stih407-clock.dtsi +++ b/arch/arm/boot/dts/stih407-clock.dtsi @@ -134,7 +134,7 @@ clk_s_c0_pll0: clk-s-c0-pll0 { #clock-cells = <1>; - compatible = "st,stih407-plls-c32-c0_0", "st,clkgen-plls-c32"; + compatible = "st,plls-c32-cx_0", "st,clkgen-plls-c32"; clocks = <&clk_sysin>; @@ -143,7 +143,7 @@ clk_s_c0_pll1: clk-s-c0-pll1 { #clock-cells = <1>; - compatible = "st,stih407-plls-c32-c0_1", "st,clkgen-plls-c32"; + compatible = "st,plls-c32-cx_1", "st,clkgen-plls-c32"; clocks = <&clk_sysin>; diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index eab3477e0a0e..ae0527754000 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -22,11 +22,15 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + /* u-boot puts hpen in SBC dmem at 0xa4 offset */ + cpu-release-addr = <0x94100A4>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + /* u-boot puts hpen in SBC dmem at 0xa4 offset */ + cpu-release-addr = <0x94100A4>; }; }; @@ -65,6 +69,17 @@ interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; }; + pwm_regulator: pwm-regulator { + compatible = "pwm-regulator"; + pwms = <&pwm1 3 8448>; + regulator-name = "CPU_1V0_AVS"; + regulator-min-microvolt = <784000>; + regulator-max-microvolt = <1299000>; + regulator-always-on; + max-duty-cycle = <255>; + status = "okay"; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -539,6 +554,7 @@ status = "disabled"; }; + st_dwc3: dwc3@8f94000 { compatible = "st,stih407-dwc3"; reg = <0x08f94000 0x1000>, <0x110 0x4>; @@ -565,5 +581,34 @@ <&phy_port2 PHY_TYPE_USB3>; }; }; + + /* COMMS PWM Module */ + pwm0: pwm@9810000 { + compatible = "st,sti-pwm"; + status = "okay"; + #pwm-cells = <2>; + reg = <0x9810000 0x68>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_chan0_default>; + clock-names = "pwm"; + clocks = <&clk_sysin>; + st,pwm-num-chan = <1>; + }; + + /* SBC PWM Module */ + pwm1: pwm@9510000 { + compatible = "st,sti-pwm"; + status = "okay"; + #pwm-cells = <2>; + reg = <0x9510000 0x68>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1_chan0_default + &pinctrl_pwm1_chan1_default + &pinctrl_pwm1_chan2_default + &pinctrl_pwm1_chan3_default>; + clock-names = "pwm"; + clocks = <&clk_sysin>; + st,pwm-num-chan = <4>; + }; }; }; diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi index 0a754f275212..1683debd0854 100644 --- a/arch/arm/boot/dts/stih407-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi @@ -439,6 +439,194 @@ }; }; }; + + tsin0 { + pinctrl_tsin0_parallel: tsin0_parallel { + st,pins { + DATA7 = <&pio10 4 ALT1 IN SE_NICLK_IO 0 CLK_A>; + DATA6 = <&pio10 5 ALT1 IN SE_NICLK_IO 0 CLK_A>; + DATA5 = <&pio10 6 ALT1 IN SE_NICLK_IO 0 CLK_A>; + DATA4 = <&pio10 7 ALT1 IN SE_NICLK_IO 0 CLK_A>; + DATA3 = <&pio11 0 ALT1 IN SE_NICLK_IO 0 CLK_A>; + DATA2 = <&pio11 1 ALT1 IN SE_NICLK_IO 0 CLK_A>; + DATA1 = <&pio11 2 ALT1 IN SE_NICLK_IO 0 CLK_A>; + DATA0 = <&pio11 3 ALT1 IN SE_NICLK_IO 0 CLK_A>; + CLKIN = <&pio10 3 ALT1 IN CLKNOTDATA 0 CLK_A>; + VALID = <&pio10 1 ALT1 IN SE_NICLK_IO 0 CLK_A>; + ERROR = <&pio10 0 ALT1 IN SE_NICLK_IO 0 CLK_A>; + PKCLK = <&pio10 2 ALT1 IN SE_NICLK_IO 0 CLK_A>; + }; + }; + pinctrl_tsin0_serial: tsin0_serial { + st,pins { + DATA7 = <&pio10 4 ALT1 IN SE_NICLK_IO 0 CLK_A>; + CLKIN = <&pio10 3 ALT1 IN CLKNOTDATA 0 CLK_A>; + VALID = <&pio10 1 ALT1 IN SE_NICLK_IO 0 CLK_A>; + ERROR = <&pio10 0 ALT1 IN SE_NICLK_IO 0 CLK_A>; + PKCLK = <&pio10 2 ALT1 IN SE_NICLK_IO 0 CLK_A>; + }; + }; + }; + + tsin1 { + pinctrl_tsin1_parallel: tsin1_parallel { + st,pins { + DATA7 = <&pio12 0 ALT1 IN SE_NICLK_IO 0 CLK_A>; + DATA6 = <&pio12 1 ALT1 IN SE_NICLK_IO 0 CLK_A>; + DATA5 = <&pio12 2 ALT1 IN SE_NICLK_IO 0 CLK_A>; + DATA4 = <&pio12 3 ALT1 IN SE_NICLK_IO 0 CLK_A>; + DATA3 = <&pio12 4 ALT1 IN SE_NICLK_IO 0 CLK_A>; + DATA2 = <&pio12 5 ALT1 IN SE_NICLK_IO 0 CLK_A>; + DATA1 = <&pio12 6 ALT1 IN SE_NICLK_IO 0 CLK_A>; + DATA0 = <&pio12 7 ALT1 IN SE_NICLK_IO 0 CLK_A>; + CLKIN = <&pio11 7 ALT1 IN CLKNOTDATA 0 CLK_A>; + VALID = <&pio11 5 ALT1 IN SE_NICLK_IO 0 CLK_A>; + ERROR = <&pio11 4 ALT1 IN SE_NICLK_IO 0 CLK_A>; + PKCLK = <&pio11 6 ALT1 IN SE_NICLK_IO 0 CLK_A>; + }; + }; + pinctrl_tsin1_serial: tsin1_serial { + st,pins { + DATA7 = <&pio12 0 ALT1 IN SE_NICLK_IO 0 CLK_A>; + CLKIN = <&pio11 7 ALT1 IN CLKNOTDATA 0 CLK_A>; + VALID = <&pio11 5 ALT1 IN SE_NICLK_IO 0 CLK_A>; + ERROR = <&pio11 4 ALT1 IN SE_NICLK_IO 0 CLK_A>; + PKCLK = <&pio11 6 ALT1 IN SE_NICLK_IO 0 CLK_A>; + }; + }; + }; + + tsin2 { + pinctrl_tsin2_parallel: tsin2_parallel { + st,pins { + DATA7 = <&pio13 4 ALT1 IN SE_NICLK_IO 0 CLK_A>; + DATA6 = <&pio13 5 ALT2 IN SE_NICLK_IO 0 CLK_B>; + DATA5 = <&pio13 6 ALT2 IN SE_NICLK_IO 0 CLK_B>; + DATA4 = <&pio13 7 ALT2 IN SE_NICLK_IO 0 CLK_B>; + DATA3 = <&pio14 0 ALT2 IN SE_NICLK_IO 0 CLK_A>; + DATA2 = <&pio14 1 ALT2 IN SE_NICLK_IO 0 CLK_B>; + DATA1 = <&pio14 2 ALT2 IN SE_NICLK_IO 0 CLK_A>; + DATA0 = <&pio14 3 ALT2 IN SE_NICLK_IO 0 CLK_A>; + CLKIN = <&pio13 3 ALT1 IN CLKNOTDATA 0 CLK_A>; + VALID = <&pio13 1 ALT1 IN SE_NICLK_IO 0 CLK_A>; + ERROR = <&pio13 0 ALT1 IN SE_NICLK_IO 0 CLK_A>; + PKCLK = <&pio13 2 ALT1 IN SE_NICLK_IO 0 CLK_A>; + }; + }; + pinctrl_tsin2_serial: tsin2_serial { + st,pins { + DATA7 = <&pio13 4 ALT1 IN SE_NICLK_IO 0 CLK_A>; + CLKIN = <&pio13 3 ALT1 IN CLKNOTDATA 0 CLK_A>; + VALID = <&pio13 1 ALT1 IN SE_NICLK_IO 0 CLK_A>; + ERROR = <&pio13 0 ALT1 IN SE_NICLK_IO 0 CLK_A>; + PKCLK = <&pio13 2 ALT1 IN SE_NICLK_IO 0 CLK_A>; + }; + }; + }; + + tsin3 { + pinctrl_tsin3_serial: tsin3_serial { + st,pins { + DATA7 = <&pio14 1 ALT1 IN SE_NICLK_IO 0 CLK_A>; + CLKIN = <&pio14 0 ALT1 IN CLKNOTDATA 0 CLK_A>; + VALID = <&pio13 6 ALT1 IN SE_NICLK_IO 0 CLK_A>; + ERROR = <&pio13 5 ALT1 IN SE_NICLK_IO 0 CLK_A>; + PKCLK = <&pio13 7 ALT1 IN SE_NICLK_IO 0 CLK_A>; + }; + }; + }; + + tsin4 { + pinctrl_tsin4_serial_alt3: tsin4_serial_alt3 { + st,pins { + DATA7 = <&pio14 6 ALT3 IN SE_NICLK_IO 0 CLK_A>; + CLKIN = <&pio14 5 ALT3 IN CLKNOTDATA 0 CLK_A>; + VALID = <&pio14 3 ALT3 IN SE_NICLK_IO 0 CLK_B>; + ERROR = <&pio14 2 ALT3 IN SE_NICLK_IO 0 CLK_B>; + PKCLK = <&pio14 4 ALT3 IN SE_NICLK_IO 0 CLK_A>; + }; + }; + }; + + tsin5 { + pinctrl_tsin5_serial_alt1: tsin5_serial_alt1 { + st,pins { + DATA7 = <&pio18 4 ALT1 IN SE_NICLK_IO 0 CLK_A>; + CLKIN = <&pio18 3 ALT1 IN CLKNOTDATA 0 CLK_A>; + VALID = <&pio18 1 ALT1 IN SE_NICLK_IO 0 CLK_A>; + ERROR = <&pio18 0 ALT1 IN SE_NICLK_IO 0 CLK_A>; + PKCLK = <&pio18 2 ALT1 IN SE_NICLK_IO 0 CLK_A>; + }; + }; + pinctrl_tsin5_serial_alt2: tsin5_serial_alt2 { + st,pins { + DATA7 = <&pio19 4 ALT2 IN SE_NICLK_IO 0 CLK_A>; + CLKIN = <&pio19 3 ALT2 IN CLKNOTDATA 0 CLK_A>; + VALID = <&pio19 1 ALT2 IN SE_NICLK_IO 0 CLK_A>; + ERROR = <&pio19 0 ALT2 IN SE_NICLK_IO 0 CLK_A>; + PKCLK = <&pio19 2 ALT2 IN SE_NICLK_IO 0 CLK_A>; + }; + }; + }; + + tsout0 { + pinctrl_tsout0_parallel: tsout0_parallel { + st,pins { + DATA7 = <&pio12 0 ALT3 OUT SE_NICLK_IO 0 CLK_A>; + DATA6 = <&pio12 1 ALT3 OUT SE_NICLK_IO 0 CLK_A>; + DATA5 = <&pio12 2 ALT3 OUT SE_NICLK_IO 0 CLK_A>; + DATA4 = <&pio12 3 ALT3 OUT SE_NICLK_IO 0 CLK_A>; + DATA3 = <&pio12 4 ALT3 OUT SE_NICLK_IO 0 CLK_A>; + DATA2 = <&pio12 5 ALT3 OUT SE_NICLK_IO 0 CLK_A>; + DATA1 = <&pio12 6 ALT3 OUT SE_NICLK_IO 0 CLK_A>; + DATA0 = <&pio12 7 ALT3 OUT SE_NICLK_IO 0 CLK_A>; + CLKIN = <&pio11 7 ALT3 OUT NICLK 0 CLK_A>; + VALID = <&pio11 5 ALT3 OUT SE_NICLK_IO 0 CLK_A>; + ERROR = <&pio11 4 ALT3 OUT SE_NICLK_IO 0 CLK_A>; + PKCLK = <&pio11 6 ALT3 OUT SE_NICLK_IO 0 CLK_A>; + }; + }; + pinctrl_tsout0_serial: tsout0_serial { + st,pins { + DATA7 = <&pio12 0 ALT3 OUT SE_NICLK_IO 0 CLK_A>; + CLKIN = <&pio11 7 ALT3 OUT NICLK 0 CLK_A>; + VALID = <&pio11 5 ALT3 OUT SE_NICLK_IO 0 CLK_A>; + ERROR = <&pio11 4 ALT3 OUT SE_NICLK_IO 0 CLK_A>; + PKCLK = <&pio11 6 ALT3 OUT SE_NICLK_IO 0 CLK_A>; + }; + }; + }; + + tsout1 { + pinctrl_tsout1_serial: tsout1_serial { + st,pins { + DATA7 = <&pio19 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + CLKIN = <&pio19 3 ALT1 OUT NICLK 0 CLK_A>; + VALID = <&pio19 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + ERROR = <&pio19 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + PKCLK = <&pio19 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + }; + }; + }; + + mtsin0 { + pinctrl_mtsin0_parallel: mtsin0_parallel { + st,pins { + DATA7 = <&pio10 4 ALT3 IN SE_NICLK_IO 0 CLK_A>; + DATA6 = <&pio10 5 ALT3 IN SE_NICLK_IO 0 CLK_A>; + DATA5 = <&pio10 6 ALT3 IN SE_NICLK_IO 0 CLK_A>; + DATA4 = <&pio10 7 ALT3 IN SE_NICLK_IO 0 CLK_A>; + DATA3 = <&pio11 0 ALT3 IN SE_NICLK_IO 0 CLK_A>; + DATA2 = <&pio11 1 ALT3 IN SE_NICLK_IO 0 CLK_A>; + DATA1 = <&pio11 2 ALT3 IN SE_NICLK_IO 0 CLK_A>; + DATA0 = <&pio11 3 ALT3 IN SE_NICLK_IO 0 CLK_A>; + CLKIN = <&pio10 3 ALT3 IN CLKNOTDATA 0 CLK_A>; + VALID = <&pio10 1 ALT3 IN SE_NICLK_IO 0 CLK_A>; + ERROR = <&pio10 0 ALT3 IN SE_NICLK_IO 0 CLK_A>; + PKCLK = <&pio10 2 ALT3 IN SE_NICLK_IO 0 CLK_A>; + }; + }; + }; }; pin-controller-front1 { @@ -452,6 +640,18 @@ interrupts-names = "irqmux"; ranges = <0 0x09210000 0x10000>; + tsin4 { + pinctrl_tsin4_serial_alt1: tsin4_serial_alt1 { + st,pins { + DATA7 = <&pio20 4 ALT1 IN SE_NICLK_IO 0 CLK_A>; + CLKIN = <&pio20 3 ALT1 IN CLKNOTDATA 0 CLK_A>; + VALID = <&pio20 1 ALT1 IN SE_NICLK_IO 0 CLK_A>; + ERROR = <&pio20 0 ALT1 IN SE_NICLK_IO 0 CLK_A>; + PKCLK = <&pio20 2 ALT1 IN SE_NICLK_IO 0 CLK_A>; + }; + }; + }; + pio20: pio@09210000 { gpio-controller; #gpio-cells = <1>; diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi index 2c560fc30503..3efa3b2ebe90 100644 --- a/arch/arm/boot/dts/stih407.dtsi +++ b/arch/arm/boot/dts/stih407.dtsi @@ -147,33 +147,5 @@ }; }; }; - - /* COMMS PWM Module */ - pwm0: pwm@9810000 { - compatible = "st,sti-pwm"; - status = "disabled"; - #pwm-cells = <2>; - reg = <0x9810000 0x68>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm0_chan0_default>; - clock-names = "pwm"; - clocks = <&clk_sysin>; - }; - - /* SBC PWM Module */ - pwm1: pwm@9510000 { - compatible = "st,sti-pwm"; - status = "disabled"; - #pwm-cells = <2>; - reg = <0x9510000 0x68>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm1_chan0_default - &pinctrl_pwm1_chan1_default - &pinctrl_pwm1_chan2_default - &pinctrl_pwm1_chan3_default>; - clock-names = "pwm"; - clocks = <&clk_sysin>; - st,pwm-num-chan = <4>; - }; }; }; diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi index 6b5803a30096..d1f2acafc9b6 100644 --- a/arch/arm/boot/dts/stih410-clock.dtsi +++ b/arch/arm/boot/dts/stih410-clock.dtsi @@ -137,7 +137,7 @@ clk_s_c0_pll0: clk-s-c0-pll0 { #clock-cells = <1>; - compatible = "st,stih407-plls-c32-c0_0", "st,clkgen-plls-c32"; + compatible = "st,plls-c32-cx_0", "st,clkgen-plls-c32"; clocks = <&clk_sysin>; @@ -146,7 +146,7 @@ clk_s_c0_pll1: clk-s-c0-pll1 { #clock-cells = <1>; - compatible = "st,stih407-plls-c32-c0_1", "st,clkgen-plls-c32"; + compatible = "st,plls-c32-cx_1", "st,clkgen-plls-c32"; clocks = <&clk_sysin>; diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi index 208b5e89036a..6f40bc99c22f 100644 --- a/arch/arm/boot/dts/stih410.dtsi +++ b/arch/arm/boot/dts/stih410.dtsi @@ -10,6 +10,10 @@ #include "stih407-family.dtsi" #include "stih410-pinctrl.dtsi" / { + aliases { + bdisp0 = &bdisp0; + }; + soc { usb2_picophy1: phy2 { compatible = "st,stih407-usb2-phy"; @@ -218,5 +222,13 @@ }; }; }; + + bdisp0:bdisp@9f10000 { + compatible = "st,stih407-bdisp"; + reg = <0x9f10000 0x1000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_NONE>; + clock-names = "bdisp"; + clocks = <&clk_s_c0_flexgen CLK_IC_BDISP_0>; + }; }; }; diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi index 0ab23daa2829..148e1772465f 100644 --- a/arch/arm/boot/dts/stih418-clock.dtsi +++ b/arch/arm/boot/dts/stih418-clock.dtsi @@ -137,7 +137,7 @@ clk_s_c0_pll0: clk-s-c0-pll0 { #clock-cells = <1>; - compatible = "st,stih407-plls-c32-c0_0", "st,clkgen-plls-c32"; + compatible = "st,plls-c32-cx_0", "st,clkgen-plls-c32"; clocks = <&clk_sysin>; @@ -146,7 +146,7 @@ clk_s_c0_pll1: clk-s-c0-pll1 { #clock-cells = <1>; - compatible = "st,stih407-plls-c32-c0_1", "st,clkgen-plls-c32"; + compatible = "st,plls-c32-cx_1", "st,clkgen-plls-c32"; clocks = <&clk_sysin>; diff --git a/arch/arm/boot/dts/stih418.dtsi b/arch/arm/boot/dts/stih418.dtsi index 354d90f521b6..8160a75539a4 100644 --- a/arch/arm/boot/dts/stih418.dtsi +++ b/arch/arm/boot/dts/stih418.dtsi @@ -17,11 +17,15 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <2>; + /* u-boot puts hpen in SBC dmem at 0xa4 offset */ + cpu-release-addr = <0x94100A4>; }; cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <3>; + /* u-boot puts hpen in SBC dmem at 0xa4 offset */ + cpu-release-addr = <0x94100A4>; }; }; diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts new file mode 100644 index 000000000000..6964fc9e97cf --- /dev/null +++ b/arch/arm/boot/dts/stm32429i-eval.dts @@ -0,0 +1,75 @@ +/* + * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "stm32f429.dtsi" + +/ { + model = "STMicroelectronics STM32429i-EVAL board"; + compatible = "st,stm32429i-eval", "st,stm32f429"; + + chosen { + bootargs = "root=/dev/ram rdinit=/linuxrc"; + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0xc0000000 0x2000000>; + }; + + aliases { + serial0 = &usart1; + }; +}; + +&clk_hse { + clock-frequency = <25000000>; +}; + +&usart1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts index 6b9aa59d978a..f0b731db6f53 100644 --- a/arch/arm/boot/dts/stm32f429-disco.dts +++ b/arch/arm/boot/dts/stm32f429-disco.dts @@ -53,8 +53,8 @@ compatible = "st,stm32f429i-disco", "st,stm32f429"; chosen { - bootargs = "console=ttyS0,115200 root=/dev/ram rdinit=/linuxrc"; - linux,stdout-path = &usart1; + bootargs = "root=/dev/ram rdinit=/linuxrc"; + stdout-path = "serial0:115200n8"; }; memory { @@ -66,6 +66,10 @@ }; }; +&clk_hse { + clock-frequency = <8000000>; +}; + &usart1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index aa73b4f4172c..d78a4815da8f 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -49,48 +49,10 @@ / { clocks { - clk_sysclk: clk-sysclk { + clk_hse: clk-hse { #clock-cells = <0>; compatible = "fixed-clock"; - clock-frequency = <180000000>; - }; - - clk_hclk: clk-hclk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <180000000>; - }; - - clk_pclk1: clk-pclk1 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <45000000>; - }; - - clk_pclk2: clk-pclk2 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <90000000>; - }; - - clk_pmtr1: clk-pmtr1 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <90000000>; - }; - - clk_pmtr2: clk-pmtr2 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <180000000>; - }; - - clk_systick: clk-systick { - compatible = "fixed-factor-clock"; - clocks = <&clk_hclk>; - #clock-cells = <0>; - clock-div = <8>; - clock-mult = <1>; + clock-frequency = <0>; }; }; @@ -99,7 +61,7 @@ compatible = "st,stm32-timer"; reg = <0x40000000 0x400>; interrupts = <28>; - clocks = <&clk_pmtr1>; + clocks = <&rcc 0 128>; status = "disabled"; }; @@ -107,7 +69,7 @@ compatible = "st,stm32-timer"; reg = <0x40000400 0x400>; interrupts = <29>; - clocks = <&clk_pmtr1>; + clocks = <&rcc 0 129>; status = "disabled"; }; @@ -115,7 +77,7 @@ compatible = "st,stm32-timer"; reg = <0x40000800 0x400>; interrupts = <30>; - clocks = <&clk_pmtr1>; + clocks = <&rcc 0 130>; status = "disabled"; }; @@ -123,14 +85,14 @@ compatible = "st,stm32-timer"; reg = <0x40000c00 0x400>; interrupts = <50>; - clocks = <&clk_pmtr1>; + clocks = <&rcc 0 131>; }; timer6: timer@40001000 { compatible = "st,stm32-timer"; reg = <0x40001000 0x400>; interrupts = <54>; - clocks = <&clk_pmtr1>; + clocks = <&rcc 0 132>; status = "disabled"; }; @@ -138,7 +100,7 @@ compatible = "st,stm32-timer"; reg = <0x40001400 0x400>; interrupts = <55>; - clocks = <&clk_pmtr1>; + clocks = <&rcc 0 133>; status = "disabled"; }; @@ -146,7 +108,7 @@ compatible = "st,stm32-usart", "st,stm32-uart"; reg = <0x40004400 0x400>; interrupts = <38>; - clocks = <&clk_pclk1>; + clocks = <&rcc 0 145>; status = "disabled"; }; @@ -154,7 +116,7 @@ compatible = "st,stm32-usart", "st,stm32-uart"; reg = <0x40004800 0x400>; interrupts = <39>; - clocks = <&clk_pclk1>; + clocks = <&rcc 0 146>; status = "disabled"; }; @@ -162,7 +124,7 @@ compatible = "st,stm32-uart"; reg = <0x40004c00 0x400>; interrupts = <52>; - clocks = <&clk_pclk1>; + clocks = <&rcc 0 147>; status = "disabled"; }; @@ -170,7 +132,7 @@ compatible = "st,stm32-uart"; reg = <0x40005000 0x400>; interrupts = <53>; - clocks = <&clk_pclk1>; + clocks = <&rcc 0 148>; status = "disabled"; }; @@ -178,7 +140,7 @@ compatible = "st,stm32-usart", "st,stm32-uart"; reg = <0x40007800 0x400>; interrupts = <82>; - clocks = <&clk_pclk1>; + clocks = <&rcc 0 158>; status = "disabled"; }; @@ -186,7 +148,7 @@ compatible = "st,stm32-usart", "st,stm32-uart"; reg = <0x40007c00 0x400>; interrupts = <83>; - clocks = <&clk_pclk1>; + clocks = <&rcc 0 159>; status = "disabled"; }; @@ -194,7 +156,7 @@ compatible = "st,stm32-usart", "st,stm32-uart"; reg = <0x40011000 0x400>; interrupts = <37>; - clocks = <&clk_pclk2>; + clocks = <&rcc 0 164>; status = "disabled"; }; @@ -202,13 +164,20 @@ compatible = "st,stm32-usart", "st,stm32-uart"; reg = <0x40011400 0x400>; interrupts = <71>; - clocks = <&clk_pclk2>; + clocks = <&rcc 0 165>; status = "disabled"; }; + + rcc: rcc@40023810 { + #clock-cells = <2>; + compatible = "st,stm32f42xx-rcc", "st,stm32-rcc"; + reg = <0x40023800 0x400>; + clocks = <&clk_hse>; + }; }; }; &systick { - clocks = <&clk_systick>; + clocks = <&rcc 1 0>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts index 93d435670ef1..f3cb297fd1db 100644 --- a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts +++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts @@ -125,12 +125,21 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { usb2_vbus_pin_a: usb2_vbus_pin@0 { allwinner,pins = "PH12"; }; }; +®_usb0_vbus { + regulator-boot-on; + status = "okay"; +}; + ®_usb1_vbus { status = "okay"; }; @@ -146,7 +155,13 @@ status = "okay"; }; +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + &usbphy { + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts index 5878a0b11f7b..143056872650 100644 --- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts +++ b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts @@ -114,6 +114,30 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + +&pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + }; +}; + +®_usb0_vbus { + status = "okay"; +}; + ®_usb2_vbus { status = "okay"; }; @@ -124,7 +148,17 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index 9afb4e018593..046a84d9719d 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -155,6 +155,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { led_pins_cubieboard: led_pins@0 { allwinner,pins = "PH20", "PH21"; @@ -162,6 +166,13 @@ allwinner,drive = <SUN4I_PINCTRL_20_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; }; ®_ahci_5v { @@ -216,7 +227,15 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts new file mode 100644 index 000000000000..985e15503378 --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts @@ -0,0 +1,202 @@ +/* + * Copyright 2015 Josef Gajdusek <atx@atx.name> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Iteaduino Plus A10"; + compatible = "itead,iteaduino-plus-a10", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_a>; + phy = <&phy1>; + status = "okay"; +}; + +&emac_sram { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mdio { + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +®_ahci_5v { + status = "okay"; +}; + +#include "axp209.dtsi" + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1450000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins_a>, + <&spi0_cs0_pins_a>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts index ebe2a04ef649..a7dd86d30fa2 100644 --- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts +++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts @@ -114,6 +114,15 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + +®_usb0_vbus { + regulator-boot-on; + status = "okay"; +}; + ®_usb1_vbus { status = "okay"; }; @@ -128,7 +137,13 @@ status = "okay"; }; +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + &usbphy { + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts index b64aa4eb071e..28e32ad705cd 100644 --- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts @@ -150,6 +150,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { allwinner,pins = "PC3"; @@ -164,6 +168,20 @@ allwinner,drive = <SUN4I_PINCTRL_20_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + }; }; ®_ahci_5v { @@ -172,6 +190,10 @@ status = "okay"; }; +®_usb0_vbus { + status = "okay"; +}; + ®_usb1_vbus { status = "okay"; }; @@ -186,7 +208,17 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index adaa57b7a943..1f3c51a08113 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -646,6 +646,19 @@ #size-cells = <0>; }; + usb_otg: usb@01c13000 { + compatible = "allwinner,sun4i-a10-musb"; + reg = <0x01c13000 0x0400>; + clocks = <&ahb_gates 0>; + interrupts = <38>; + interrupt-names = "mc"; + phys = <&usbphy 0>; + phy-names = "usb"; + extcon = <&usbphy 0>; + allwinner,sram = <&otg_sram 1>; + status = "disabled"; + }; + usbphy: phy@01c13400 { #phy-cells = <1>; compatible = "allwinner,sun4i-a10-usb-phy"; @@ -756,8 +769,7 @@ clocks = <&apb0_gates 5>; gpio-controller; interrupt-controller; - #interrupt-cells = <2>; - #size-cells = <0>; + #interrupt-cells = <3>; #gpio-cells = <3>; pwm0_pins_a: pwm0@0 { diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index a7e19e4847f7..5a422c1ff725 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -96,8 +96,15 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; status = "okay"; + + axp152: pmic@30 { + reg = <0x30>; + interrupts = <0>; + }; }; +#include "axp152.dtsi" + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins_a>; @@ -189,6 +196,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 { allwinner,pins = "PG1"; @@ -217,6 +228,18 @@ allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PG12"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +®_usb0_vbus { + gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ + status = "okay"; }; ®_usb1_vbus { @@ -243,8 +266,20 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb0_vbus_pin_a { + allwinner,pins = "PG11"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; }; - diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts index 990f9d61ae4d..3724b988064e 100644 --- a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts +++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts @@ -45,6 +45,7 @@ #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/sun4i-a10.h> / { @@ -96,6 +97,25 @@ status = "okay"; }; +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button@200 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <200000>; + }; + + button@400 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <400000>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>; @@ -110,6 +130,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { mmc0_cd_pin_h702: mmc0_cd_pin@0 { allwinner,pins = "PG0"; @@ -117,6 +141,20 @@ allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PG2"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; }; #include "axp209.dtsi" @@ -152,13 +190,33 @@ regulator-name = "vcc-wifi"; }; +®_usb0_vbus { + pinctrl-0 = <&usb0_vbus_pin_a>; + gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins_b>; status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb0_vbus_pin_a { + allwinner,pins = "PG12"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_ldo3>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index 42324005eb7c..b3c234c65ea1 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -159,6 +159,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 { allwinner,pins = "PG0"; @@ -174,6 +178,20 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PG2"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + }; + usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 { allwinner,pins = "PG11"; allwinner,function = "gpio_out"; @@ -182,6 +200,11 @@ }; }; +®_usb0_vbus { + status = "okay"; + gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ +}; + ®_usb1_vbus { pinctrl-0 = <&usb1_vbus_pin_olinuxino>; gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; @@ -194,7 +217,21 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb0_vbus_pin_a { + allwinner,pins = "PG12"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts index 514f159a14d4..eb793d5a2bd6 100644 --- a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts +++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts @@ -93,7 +93,7 @@ compatible = "chipone,icn8318"; reg = <0x40>; interrupt-parent = <&pio>; - interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */ + interrupts = <6 9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */ pinctrl-names = "default"; pinctrl-0 = <&ts_wake_pin_p66>; wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ @@ -153,6 +153,10 @@ }; }; +&otg_sram { + status = "okay"; +}; + &pio { mmc0_cd_pin_p66: mmc0_cd_pin@0 { allwinner,pins = "PG0"; @@ -161,6 +165,20 @@ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PG2"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + i2c_lcd_pins: i2c_lcd_pin@0 { allwinner,pins = "PG10", "PG12"; allwinner,function = "gpio_out"; @@ -219,7 +237,16 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_ldo3>; status = "okay"; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index 427c0e7289fa..78b993abbaa3 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -417,6 +417,19 @@ #size-cells = <0>; }; + usb_otg: usb@01c13000 { + compatible = "allwinner,sun4i-a10-musb"; + reg = <0x01c13000 0x0400>; + clocks = <&ahb_gates 0>; + interrupts = <38>; + interrupt-names = "mc"; + phys = <&usbphy 0>; + phy-names = "usb"; + extcon = <&usbphy 0>; + allwinner,sram = <&otg_sram 1>; + status = "disabled"; + }; + usbphy: phy@01c13400 { #phy-cells = <1>; compatible = "allwinner,sun5i-a13-usb-phy"; @@ -476,8 +489,7 @@ clocks = <&apb0_gates 5>; gpio-controller; interrupt-controller; - #interrupt-cells = <2>; - #size-cells = <0>; + #interrupt-cells = <3>; #gpio-cells = <3>; i2c0_pins_a: i2c0@0 { diff --git a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts index 4404f37d132e..4dd70cce2127 100644 --- a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts +++ b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts @@ -143,6 +143,11 @@ status = "okay"; }; +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + &usbphy { usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index e4d3484d97bd..54bb83b58f42 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -544,6 +544,19 @@ #size-cells = <0>; }; + usb_otg: usb@01c19000 { + compatible = "allwinner,sun6i-a31-musb"; + reg = <0x01c19000 0x0400>; + clocks = <&ahb1_gates 24>; + resets = <&ahb1_rst 24>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mc"; + phys = <&usbphy 0>; + phy-names = "usb"; + extcon = <&usbphy 0>; + status = "disabled"; + }; + usbphy: phy@01c19400 { compatible = "allwinner,sun6i-a31-usb-phy"; reg = <0x01c19400 0x10>, @@ -631,8 +644,7 @@ clocks = <&apb1_gates 5>; gpio-controller; interrupt-controller; - #interrupt-cells = <2>; - #size-cells = <0>; + #interrupt-cells = <3>; #gpio-cells = <3>; uart0_pins_a: uart0@0 { diff --git a/arch/arm/boot/dts/sun6i-a31s-cs908.dts b/arch/arm/boot/dts/sun6i-a31s-cs908.dts index 1e2411a2bcea..5e8f8c4f2b30 100644 --- a/arch/arm/boot/dts/sun6i-a31s-cs908.dts +++ b/arch/arm/boot/dts/sun6i-a31s-cs908.dts @@ -93,6 +93,11 @@ status = "okay"; }; +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + &usbphy { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index 4611e2f5a99e..e6b019232a9e 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -88,15 +88,11 @@ }; }; - reg_vmmc3: vmmc3 { - compatible = "regulator-fixed"; + mmc3_pwrseq: mmc3_pwrseq { + compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; - pinctrl-0 = <&vmmc3_pin_cubietruck>; - regulator-name = "vmmc3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - enable-active-high; - gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&mmc3_pwrseq_pin_cubietruck>; + reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */ }; }; @@ -172,7 +168,8 @@ &mmc3 { pinctrl-names = "default"; pinctrl-0 = <&mmc3_pins_a>; - vmmc-supply = <®_vmmc3>; + vmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&mmc3_pwrseq>; bus-width = <4>; non-removable; status = "okay"; @@ -181,7 +178,7 @@ reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&pio>; - interrupts = <10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */ + interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */ interrupt-names = "host-wake"; }; }; @@ -199,23 +196,27 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { - vmmc3_pin_cubietruck: vmmc3_pin@0 { - allwinner,pins = "PH9"; + ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 { + allwinner,pins = "PH12"; allwinner,function = "gpio_out"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 { - allwinner,pins = "PH12"; + led_pins_cubietruck: led_pins@0 { + allwinner,pins = "PH7", "PH11", "PH20", "PH21"; allwinner,function = "gpio_out"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - led_pins_cubietruck: led_pins@0 { - allwinner,pins = "PH7", "PH11", "PH20", "PH21"; + mmc3_pwrseq_pin_cubietruck: mmc3_pwrseq_pin@0 { + allwinner,pins = "PH9"; allwinner,function = "gpio_out"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; @@ -227,6 +228,20 @@ allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH19"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH22"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; }; &pwm { @@ -288,7 +303,16 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */ + usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts index f32f6f20d923..1e6bd360dac0 100644 --- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts +++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts @@ -178,7 +178,7 @@ reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&pio>; - interrupts = <10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */ + interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */ interrupt-names = "host-wake"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts index 769726dfb046..04237085dc39 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts @@ -135,6 +135,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { allwinner,pins = "PC3"; @@ -149,6 +153,20 @@ allwinner,drive = <SUN4I_PINCTRL_20_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + }; }; ®_ahci_5v { @@ -157,6 +175,10 @@ status = "okay"; }; +®_usb0_vbus { + status = "okay"; +}; + ®_usb1_vbus { status = "okay"; }; @@ -171,7 +193,17 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index 00f8f25eccae..c5d70caade82 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -215,6 +215,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 { allwinner,pins = "PH11"; @@ -229,12 +233,30 @@ allwinner,drive = <SUN4I_PINCTRL_20_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + }; }; ®_ahci_5v { status = "okay"; }; +®_usb0_vbus { + status = "okay"; +}; + ®_usb1_vbus { status = "okay"; }; @@ -275,7 +297,17 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index d3b2f26417aa..2bebaa286f9a 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -722,6 +722,19 @@ #size-cells = <0>; }; + usb_otg: usb@01c13000 { + compatible = "allwinner,sun4i-a10-musb"; + reg = <0x01c13000 0x0400>; + clocks = <&ahb_gates 0>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mc"; + phys = <&usbphy 0>; + phy-names = "usb"; + extcon = <&usbphy 0>; + allwinner,sram = <&otg_sram 1>; + status = "disabled"; + }; + usbphy: phy@01c13400 { #phy-cells = <1>; compatible = "allwinner,sun7i-a20-usb-phy"; @@ -825,8 +838,7 @@ clocks = <&apb0_gates 5>; gpio-controller; interrupt-controller; - #interrupt-cells = <2>; - #size-cells = <0>; + #interrupt-cells = <3>; #gpio-cells = <3>; pwm0_pins_a: pwm0@0 { diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index c318c770b6c1..27a925ec17d2 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -347,6 +347,28 @@ #size-cells = <0>; }; + ehci0: usb@01c1a000 { + compatible = "allwinner,sun8i-a23-ehci", "generic-ehci"; + reg = <0x01c1a000 0x100>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ahb1_gates 26>; + resets = <&ahb1_rst 26>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci0: usb@01c1a400 { + compatible = "allwinner,sun8i-a23-ohci", "generic-ohci"; + reg = <0x01c1a400 0x100>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ahb1_gates 29>, <&usb_clk 16>; + resets = <&ahb1_rst 29>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + pio: pinctrl@01c20800 { /* compatible gets set in SoC specific dtsi file */ reg = <0x01c20800 0x400>; @@ -354,8 +376,7 @@ clocks = <&apb1_gates 5>; gpio-controller; interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; + #interrupt-cells = <3>; #gpio-cells = <3>; uart0_pins_a: uart0@0 { diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts index 95134c69cfc1..8d9da6886a4c 100644 --- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts +++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts @@ -125,3 +125,12 @@ pinctrl-0 = <&r_uart_pins_a>; status = "okay"; }; + +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi index 8698f7aa31c7..2cc27c7a59dc 100644 --- a/arch/arm/boot/dts/sun8i-a23.dtsi +++ b/arch/arm/boot/dts/sun8i-a23.dtsi @@ -58,6 +58,39 @@ clock-output-names = "mbus"; }; }; + + soc@01c00000 { + usb_otg: usb@01c19000 { + compatible = "allwinner,sun6i-a31-musb"; + reg = <0x01c19000 0x0400>; + clocks = <&ahb1_gates 24>; + resets = <&ahb1_rst 24>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mc"; + phys = <&usbphy 0>; + phy-names = "usb"; + extcon = <&usbphy 0>; + status = "disabled"; + }; + + usbphy: phy@01c19400 { + compatible = "allwinner,sun8i-a23-usb-phy"; + reg = <0x01c19400 0x10>, + <0x01c1a800 0x4>; + reg-names = "phy_ctrl", + "pmu1"; + clocks = <&usb_clk 8>, + <&usb_clk 9>; + clock-names = "usb0_phy", + "usb1_phy"; + resets = <&usb_clk 0>, + <&usb_clk 1>; + reset-names = "usb0_reset", + "usb1_reset"; + status = "disabled"; + #phy-cells = <1>; + }; + }; }; &pio { diff --git a/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts b/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts index 866703355b9c..1aefc6793e25 100644 --- a/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts +++ b/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts @@ -61,6 +61,10 @@ }; }; +&ehci0 { + status = "okay"; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -109,6 +113,10 @@ status = "okay"; }; +&ohci0 { + status = "okay"; +}; + &pio { mmc0_cd_pin_q8h: mmc0_cd_pin@0 { allwinner,pins = "PB4"; @@ -123,3 +131,12 @@ pinctrl-0 = <&r_uart_pins_a>; status = "okay"; }; + +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts b/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts new file mode 100644 index 000000000000..a43897515fb6 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts @@ -0,0 +1,133 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a33.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Ippo Q8H Quad Core Tablet (v1.2)"; + compatible = "ippo,a33-q8h-v1.2", "allwinner,sun8i-a33"; + + aliases { + serial0 = &r_uart; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@200 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <200000>; + }; + + button@400 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <400000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ + cd-inverted; + status = "okay"; +}; + +&pio { + mmc0_cd_pin_q8h: mmc0_cd_pin@0 { + allwinner,pins = "PB4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +&r_uart { + pinctrl-names = "default"; + pinctrl-0 = <&r_uart_pins_a>; + status = "okay"; +}; + +/* + * FIXME for now we only support host mode and rely on u-boot to have + * turned on Vbus which is controlled by the axp223 pmic on the board. + * + * Once we have axp223 support we should switch to fully supporting otg. + */ +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts index 5788c29cb56a..1d5390d4e03a 100644 --- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts +++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts @@ -63,6 +63,10 @@ }; }; +&ehci0 { + status = "okay"; +}; + &lradc { vref-supply = <®_vcc3v0>; status = "okay"; @@ -113,6 +117,10 @@ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; +&ohci0 { + status = "okay"; +}; + &pio { mmc0_cd_pin_sina33: mmc0_cd_pin@0 { allwinner,pins = "PB4"; @@ -127,3 +135,8 @@ pinctrl-0 = <&uart0_pins_b>; status = "okay"; }; + +&usbphy { + status = "okay"; + usb1_vbus-supply = <®_vcc5v0>; /* USB1 VBUS is always on */ +}; diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index 85ee08098b7b..faa7d3c1fcea 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -80,6 +80,39 @@ clock-output-names = "mbus"; }; }; + + soc@01c00000 { + usb_otg: usb@01c19000 { + compatible = "allwinner,sun8i-a33-musb"; + reg = <0x01c19000 0x0400>; + clocks = <&ahb1_gates 24>; + resets = <&ahb1_rst 24>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mc"; + phys = <&usbphy 0>; + phy-names = "usb"; + extcon = <&usbphy 0>; + status = "disabled"; + }; + + usbphy: phy@01c19400 { + compatible = "allwinner,sun8i-a33-usb-phy"; + reg = <0x01c19400 0x14>, + <0x01c1a800 0x4>; + reg-names = "phy_ctrl", + "pmu1"; + clocks = <&usb_clk 8>, + <&usb_clk 9>; + clock-names = "usb0_phy", + "usb1_phy"; + resets = <&usb_clk 0>, + <&usb_clk 1>; + reset-names = "usb0_reset", + "usb1_reset"; + status = "disabled"; + #phy-cells = <1>; + }; + }; }; &pio { diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi index 51cc8383f70f..f1953b0c5059 100644 --- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi +++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi @@ -108,6 +108,7 @@ regulator-name = "usb1-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; + regulator-boot-on; enable-active-high; gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; status = "disabled"; @@ -120,6 +121,7 @@ regulator-name = "usb2-vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; + regulator-boot-on; enable-active-high; gpio = <&pio 7 3 GPIO_ACTIVE_HIGH>; status = "disabled"; diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index f58a3d9d5f13..9d4f86e9c50a 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -214,9 +214,9 @@ #dma-cells = <1>; }; - ahb: ahb@6000c004 { + ahb: ahb@6000c000 { compatible = "nvidia,tegra114-ahb", "nvidia,tegra30-ahb"; - reg = <0x6000c004 0x14c>; + reg = <0x6000c000 0x150>; }; gpio: gpio@6000d000 { @@ -234,6 +234,7 @@ gpio-controller; #interrupt-cells = <2>; interrupt-controller; + gpio-ranges = <&pinmux 0 0 246>; }; apbmisc@70000800 { diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index bd43ed6d6ec7..66b4451eb2ca 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -53,6 +53,14 @@ }; }; + gpu@0,57000000 { + /* + * Node left disabled on purpose - the bootloader will enable + * it after having set the VPR up + */ + vdd-supply = <&vdd_gpu>; + }; + pinmux: pinmux@0,70000868 { pinctrl-names = "boot"; pinctrl-0 = <&state_boot>; @@ -1462,7 +1470,7 @@ vin-ldo9-10-supply = <&vdd_5v0_sys>; vin-ldo11-supply = <&vdd_3v3_run>; - sd0 { + vdd_cpu: sd0 { regulator-name = "+VDD_CPU_AP"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1400000>; @@ -1514,7 +1522,7 @@ regulator-always-on; }; - sd6 { + vdd_gpu: sd6 { regulator-name = "+VDD_GPU_AP"; regulator-min-microvolt = <650000>; regulator-max-microvolt = <1200000>; @@ -1694,6 +1702,13 @@ non-removable; }; + /* CPU DFLL clock */ + clock@0,70110000 { + status = "okay"; + vdd-cpu-supply = <&vdd_cpu>; + nvidia,i2c-fs-rate = <400000>; + }; + ahub@0,70300000 { i2s@0,70301100 { status = "okay"; @@ -1732,6 +1747,12 @@ }; }; + cpus { + cpu@0 { + vdd-cpu-supply = <&vdd_cpu>; + }; + }; + gpio-keys { compatible = "gpio-keys"; diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index 79e724bb7df7..cfbdf429b45d 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -43,6 +43,14 @@ }; }; + gpu@0,57000000 { + /* + * Node left disabled on purpose - the bootloader will enable + * it after having set the VPR up + */ + vdd-supply = <&vdd_gpu>; + }; + pinmux: pinmux@0,70000868 { pinctrl-names = "boot"; pinctrl-0 = <&pinmux_boot>; @@ -735,7 +743,7 @@ regulator-always-on; }; - sd6 { + vdd_gpu: sd6 { regulator-name = "+VDD_GPU_AP"; regulator-min-microvolt = <650000>; regulator-max-microvolt = <1200000>; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 01a9f742b08f..1e204a6de12c 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -4,6 +4,7 @@ #include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/tegra124-car.h> #include <dt-bindings/thermal/tegra124-soctherm.h> #include "skeleton.dtsi" @@ -188,6 +189,9 @@ clock-names = "gpu", "pwr"; resets = <&tegra_car 184>; reset-names = "gpu"; + + iommus = <&mc TEGRA_SWGROUP_GPU>; + status = "disabled"; }; @@ -254,6 +258,7 @@ gpio-controller; #interrupt-cells = <2>; interrupt-controller; + gpio-ranges = <&pinmux 0 0 251>; }; apbdma: dma@0,60020000 { @@ -702,6 +707,30 @@ #thermal-sensor-cells = <1>; }; + dfll: clock@0,70110000 { + compatible = "nvidia,tegra124-dfll"; + reg = <0 0x70110000 0 0x100>, /* DFLL control */ + <0 0x70110000 0 0x100>, /* I2C output control */ + <0 0x70110100 0 0x100>, /* Integrated I2C controller */ + <0 0x70110200 0 0x100>; /* Look-up table RAM */ + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_DFLL_SOC>, + <&tegra_car TEGRA124_CLK_DFLL_REF>, + <&tegra_car TEGRA124_CLK_I2C5>; + clock-names = "soc", "ref", "i2c"; + resets = <&tegra_car TEGRA124_RST_DFLL_DVCO>; + reset-names = "dvco"; + #clock-cells = <0>; + clock-output-names = "dfllCPU_out"; + nvidia,sample-rate = <12500>; + nvidia,droop-ctrl = <0x00000f00>; + nvidia,force-mode = <1>; + nvidia,cf = <10>; + nvidia,ci = <0>; + nvidia,cg = <2>; + status = "disabled"; + }; + ahub@0,70300000 { compatible = "nvidia,tegra124-ahub"; reg = <0x0 0x70300000 0x0 0x200>, @@ -922,6 +951,15 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0>; + + clocks = <&tegra_car TEGRA124_CLK_CCLK_G>, + <&tegra_car TEGRA124_CLK_CCLK_LP>, + <&tegra_car TEGRA124_CLK_PLL_X>, + <&tegra_car TEGRA124_CLK_PLL_P>, + <&dfll>; + clock-names = "cpu_g", "cpu_lp", "pll_x", "pll_p", "dfll"; + /* FIXME: what's the actual transition time? */ + clock-latency = <300000>; }; cpu@1 { @@ -943,6 +981,18 @@ }; }; + pmu { + compatible = "arm,cortex-a15-pmu"; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&{/cpus/cpu@0}>, + <&{/cpus/cpu@1}>, + <&{/cpus/cpu@2}>, + <&{/cpus/cpu@3}>; + }; + thermal-zones { cpu { polling-delay-passive = <1000>; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index f444b67f55c6..e058709e6d98 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -225,9 +225,9 @@ #dma-cells = <1>; }; - ahb@6000c004 { + ahb@6000c000 { compatible = "nvidia,tegra20-ahb"; - reg = <0x6000c004 0x10c>; /* AHB Arbitration + Gizmo Controller */ + reg = <0x6000c000 0x110>; /* AHB Arbitration + Gizmo Controller */ }; gpio: gpio@6000d000 { @@ -244,6 +244,7 @@ gpio-controller; #interrupt-cells = <2>; interrupt-controller; + gpio-ranges = <&pinmux 0 0 224>; }; apbmisc@70000800 { diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 782b11b2af6a..fe04fb5e155f 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -329,9 +329,9 @@ #dma-cells = <1>; }; - ahb: ahb@6000c004 { + ahb: ahb@6000c000 { compatible = "nvidia,tegra30-ahb"; - reg = <0x6000c004 0x14c>; /* AHB Arbitration + Gizmo Controller */ + reg = <0x6000c000 0x150>; /* AHB Arbitration + Gizmo Controller */ }; gpio: gpio@6000d000 { @@ -349,6 +349,7 @@ gpio-controller; #interrupt-cells = <2>; interrupt-controller; + gpio-ranges = <&pinmux 0 0 248>; }; apbmisc@70000800 { diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts index 200b0c99ed34..bfd3bb8c8285 100644 --- a/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts +++ b/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts @@ -44,6 +44,7 @@ /dts-v1/; /include/ "uniphier-ph1-ld4.dtsi" +/include/ "uniphier-ref-daughter.dtsi" /include/ "uniphier-support-card.dtsi" / { @@ -57,11 +58,18 @@ chosen { bootargs = "console=ttyS0,115200"; - stdout-path = &serialsc; + stdout-path = &serial0; }; aliases { - serial0 = &serialsc; + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; }; }; @@ -74,6 +82,30 @@ ranges = <0x00000000 1 0x03f00000 0x00100000>; }; -&serialsc { +ðsc { interrupts = <0 49 4>; }; + +&serial0 { + status = "okay"; +}; + +&serial2 { + status = "okay"; +}; + +&serial3 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi index 6a34c56e4693..a6a185fae8f1 100644 --- a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi @@ -64,6 +64,18 @@ compatible = "fixed-clock"; clock-frequency = <50000000>; }; + + uart_clk: uart_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <36864000>; + }; + + iobus_clk: iobus_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <100000000>; + }; }; soc { @@ -79,12 +91,141 @@ #size-cells = <1>; }; + serial0: serial@54006800 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006800 0x40>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + interrupts = <0 33 4>; + clocks = <&uart_clk>; + fifo-size = <64>; + }; + + serial1: serial@54006900 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006900 0x40>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + interrupts = <0 35 4>; + clocks = <&uart_clk>; + fifo-size = <64>; + }; + + serial2: serial@54006a00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006a00 0x40>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + interrupts = <0 37 4>; + clocks = <&uart_clk>; + fifo-size = <64>; + }; + + serial3: serial@54006b00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006b00 0x40>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + interrupts = <0 29 4>; + clocks = <&uart_clk>; + fifo-size = <64>; + }; + + i2c0: i2c@58400000 { + compatible = "socionext,uniphier-i2c"; + status = "disabled"; + reg = <0x58400000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + interrupts = <0 41 1>; + clocks = <&iobus_clk>; + clock-frequency = <100000>; + }; + + i2c1: i2c@58480000 { + compatible = "socionext,uniphier-i2c"; + status = "disabled"; + reg = <0x58480000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + interrupts = <0 42 1>; + clocks = <&iobus_clk>; + clock-frequency = <100000>; + }; + + /* chip-internal connection for DMD */ + i2c2: i2c@58500000 { + compatible = "socionext,uniphier-i2c"; + reg = <0x58500000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + interrupts = <0 43 1>; + clocks = <&iobus_clk>; + clock-frequency = <400000>; + }; + + i2c3: i2c@58580000 { + compatible = "socionext,uniphier-i2c"; + status = "disabled"; + reg = <0x58580000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + interrupts = <0 44 1>; + clocks = <&iobus_clk>; + clock-frequency = <100000>; + }; + system-bus-controller-misc@59800000 { compatible = "socionext,uniphier-system-bus-controller-misc", "syscon"; reg = <0x59800000 0x2000>; }; + usb0: usb@5a800100 { + compatible = "socionext,uniphier-ehci", "generic-ehci"; + status = "disabled"; + reg = <0x5a800100 0x100>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0>; + interrupts = <0 80 4>; + }; + + usb1: usb@5a810100 { + compatible = "socionext,uniphier-ehci", "generic-ehci"; + status = "disabled"; + reg = <0x5a810100 0x100>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1>; + interrupts = <0 81 4>; + }; + + usb2: usb@5a820100 { + compatible = "socionext,uniphier-ehci", "generic-ehci"; + status = "disabled"; + reg = <0x5a820100 0x100>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2>; + interrupts = <0 82 4>; + }; + + pinctrl: pinctrl@5f801000 { + compatible = "socionext,ph1-ld4-pinctrl", + "syscon"; + reg = <0x5f801000 0xe00>; + }; + timer@60000200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x60000200 0x20>; @@ -108,3 +249,5 @@ }; }; }; + +/include/ "uniphier-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts new file mode 100644 index 000000000000..33963acd7e8f --- /dev/null +++ b/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts @@ -0,0 +1,105 @@ +/* + * Device Tree Source for UniPhier PH1-LD6b Reference Board + * + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "uniphier-ph1-ld6b.dtsi" +/include/ "uniphier-ref-daughter.dtsi" +/include/ "uniphier-support-card.dtsi" + +/ { + model = "UniPhier PH1-LD6b Reference Board"; + compatible = "socionext,ph1-ld6b-ref", "socionext,ph1-ld6b"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &serial0; + }; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + }; +}; + +&extbus { + ranges = <0 0x00000000 0x0f000000 0x01000000 + 1 0x00000000 0x00000000 0x08000000>; +}; + +&support_card { + ranges = <0x00000000 1 0x03f00000 0x00100000>; +}; + +ðsc { + interrupts = <0 50 4>; +}; + +&serial0 { + status = "okay"; +}; + +&serial1 { + status = "okay"; +}; + +&serial2 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/uniphier-ph1-ld6b.dtsi b/arch/arm/boot/dts/uniphier-ph1-ld6b.dtsi new file mode 100644 index 000000000000..c6499ee65bc6 --- /dev/null +++ b/arch/arm/boot/dts/uniphier-ph1-ld6b.dtsi @@ -0,0 +1,67 @@ +/* + * Device Tree Source for UniPhier PH1-LD6b SoC + * + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * PH1-LD6b consists of two silicon dies: D-chip and A-chip. + * The D-chip (digital chip) is the same as the ProXstream2 die. + * Reuse the ProXstream2 device tree with some properties overridden. + */ +/include/ "uniphier-proxstream2.dtsi" + +/ { + compatible = "socionext,ph1-ld6b"; +}; + +/* UART3 unavilable: the pads are not wired to the package balls */ +&serial3 { + status = "disabled"; +}; + +/* + * PH1-LD6b and ProXstream2 have completely different packages, + * which makes the pinctrl driver unshareable. + */ +&pinctrl { + compatible = "socionext,ph1-ld6b-pinctrl", "syscon"; +}; diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts b/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts index d891135a70c2..69a5b7d39629 100644 --- a/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts +++ b/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts @@ -44,6 +44,7 @@ /dts-v1/; /include/ "uniphier-ph1-pro4.dtsi" +/include/ "uniphier-ref-daughter.dtsi" /include/ "uniphier-support-card.dtsi" / { @@ -57,11 +58,20 @@ chosen { bootargs = "console=ttyS0,115200"; - stdout-path = &serialsc; + stdout-path = &serial0; }; aliases { - serial0 = &serialsc; + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c5 = &i2c5; + i2c6 = &i2c6; }; }; @@ -74,6 +84,30 @@ ranges = <0x00000000 1 0x03f00000 0x00100000>; }; -&serialsc { +ðsc { interrupts = <0 50 4>; }; + +&serial0 { + status = "okay"; +}; + +&serial1 { + status = "okay"; +}; + +&serial2 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi index dc633603aed2..e8bbc454d788 100644 --- a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi @@ -71,6 +71,18 @@ compatible = "fixed-clock"; clock-frequency = <50000000>; }; + + uart_clk: uart_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <73728000>; + }; + + i2c_clk: i2c_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; + }; }; soc { @@ -86,12 +98,156 @@ #size-cells = <1>; }; + serial0: serial@54006800 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006800 0x40>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + interrupts = <0 33 4>; + clocks = <&uart_clk>; + fifo-size = <64>; + }; + + serial1: serial@54006900 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006900 0x40>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + interrupts = <0 35 4>; + clocks = <&uart_clk>; + fifo-size = <64>; + }; + + serial2: serial@54006a00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006a00 0x40>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + interrupts = <0 37 4>; + clocks = <&uart_clk>; + fifo-size = <64>; + }; + + serial3: serial@54006b00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006b00 0x40>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + interrupts = <0 29 4>; + clocks = <&uart_clk>; + fifo-size = <64>; + }; + + i2c0: i2c@58780000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58780000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + interrupts = <0 41 4>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; + + i2c1: i2c@58781000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58781000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + interrupts = <0 42 4>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; + + i2c2: i2c@58782000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58782000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + interrupts = <0 43 4>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; + + i2c3: i2c@58783000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58783000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + interrupts = <0 44 4>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; + + /* i2c4 does not exist */ + + /* chip-internal connection for DMD */ + i2c5: i2c@58785000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58785000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 25 4>; + clocks = <&i2c_clk>; + clock-frequency = <400000>; + }; + + /* chip-internal connection for HDMI */ + i2c6: i2c@58786000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58786000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 26 4>; + clocks = <&i2c_clk>; + clock-frequency = <400000>; + }; + system-bus-controller-misc@59800000 { compatible = "socionext,uniphier-system-bus-controller-misc", "syscon"; reg = <0x59800000 0x2000>; }; + usb2: usb@5a800100 { + compatible = "socionext,uniphier-ehci", "generic-ehci"; + status = "disabled"; + reg = <0x5a800100 0x100>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2>; + interrupts = <0 80 4>; + }; + + usb3: usb@5a810100 { + compatible = "socionext,uniphier-ehci", "generic-ehci"; + status = "disabled"; + reg = <0x5a810100 0x100>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb3>; + interrupts = <0 81 4>; + }; + + pinctrl: pinctrl@5f801000 { + compatible = "socionext,ph1-pro4-pinctrl", + "syscon"; + reg = <0x5f801000 0xe00>; + }; + timer@60000200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x60000200 0x20>; @@ -115,3 +271,5 @@ }; }; }; + +/include/ "uniphier-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi new file mode 100644 index 000000000000..59c2b127cffa --- /dev/null +++ b/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi @@ -0,0 +1,252 @@ +/* + * Device Tree Source for UniPhier PH1-Pro5 SoC + * + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "socionext,ph1-pro5"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "socionext,uniphier-smp"; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + }; + + clocks { + arm_timer_clk: arm_timer_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; + }; + + uart_clk: uart_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <73728000>; + }; + + i2c_clk: i2c_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-parent = <&intc>; + + extbus: extbus { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + }; + + serial0: serial@54006800 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006800 0x40>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + interrupts = <0 33 4>; + clocks = <&uart_clk>; + }; + + serial1: serial@54006900 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006900 0x40>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + interrupts = <0 35 4>; + clocks = <&uart_clk>; + }; + + serial2: serial@54006a00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006a00 0x40>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + interrupts = <0 37 4>; + clocks = <&uart_clk>; + }; + + serial3: serial@54006b00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006b00 0x40>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + interrupts = <0 177 4>; + clocks = <&uart_clk>; + }; + + i2c0: i2c@58780000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58780000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + interrupts = <0 41 4>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; + + i2c1: i2c@58781000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58781000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + interrupts = <0 42 4>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; + + i2c2: i2c@58782000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58782000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + interrupts = <0 43 4>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; + + i2c3: i2c@58783000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58783000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + interrupts = <0 44 4>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; + + /* i2c4 does not exist */ + + /* chip-internal connection for DMD */ + i2c5: i2c@58785000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58785000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 25 4>; + clocks = <&i2c_clk>; + clock-frequency = <400000>; + }; + + /* chip-internal connection for HDMI */ + i2c6: i2c@58786000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58786000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 26 4>; + clocks = <&i2c_clk>; + clock-frequency = <400000>; + }; + + system-bus-controller-misc@59800000 { + compatible = "socionext,uniphier-system-bus-controller-misc", + "syscon"; + reg = <0x59800000 0x2000>; + }; + + pinctrl: pinctrl@5f801000 { + compatible = "socionext,ph1-pro5-pinctrl", "syscon"; + reg = <0x5f801000 0xe00>; + }; + + timer@60000200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x60000200 0x20>; + interrupts = <1 11 0x304>; + clocks = <&arm_timer_clk>; + }; + + timer@60000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x60000600 0x20>; + interrupts = <1 13 0x304>; + clocks = <&arm_timer_clk>; + }; + + intc: interrupt-controller@60001000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x60001000 0x1000>, + <0x60000100 0x100>; + }; + }; +}; + +/include/ "uniphier-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts b/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts index 3ea64ae009e9..1a440f87fa92 100644 --- a/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts +++ b/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts @@ -44,6 +44,7 @@ /dts-v1/; /include/ "uniphier-ph1-sld3.dtsi" +/include/ "uniphier-ref-daughter.dtsi" /include/ "uniphier-support-card.dtsi" / { @@ -58,11 +59,18 @@ chosen { bootargs = "console=ttyS0,115200"; - stdout-path = &serialsc; + stdout-path = &serial0; }; aliases { - serial0 = &serialsc; + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; }; }; @@ -75,6 +83,38 @@ ranges = <0x00000000 1 0x03f00000 0x00100000>; }; -&serialsc { +ðsc { interrupts = <0 49 4>; }; + +&serial0 { + status = "okay"; +}; + +&serial1 { + status = "okay"; +}; + +&serial2 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi index 248b1886834f..3cc90cd37a26 100644 --- a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi @@ -71,6 +71,18 @@ compatible = "fixed-clock"; clock-frequency = <50000000>; }; + + uart_clk: uart_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <36864000>; + }; + + iobus_clk: iobus_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <100000000>; + }; }; soc { @@ -108,10 +120,120 @@ <0x20000100 0x100>; }; + serial0: serial@54006800 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006800 0x40>; + interrupts = <0 33 4>; + clocks = <&uart_clk>; + fifo-size = <64>; + }; + + serial1: serial@54006900 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006900 0x40>; + interrupts = <0 35 4>; + clocks = <&uart_clk>; + fifo-size = <64>; + }; + + serial2: serial@54006a00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006a00 0x40>; + interrupts = <0 37 4>; + clocks = <&uart_clk>; + fifo-size = <64>; + }; + + i2c0: i2c@58400000 { + compatible = "socionext,uniphier-i2c"; + status = "disabled"; + reg = <0x58400000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 41 1>; + clocks = <&iobus_clk>; + clock-frequency = <100000>; + }; + + i2c1: i2c@58480000 { + compatible = "socionext,uniphier-i2c"; + status = "disabled"; + reg = <0x58480000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 42 1>; + clocks = <&iobus_clk>; + clock-frequency = <100000>; + }; + + i2c2: i2c@58500000 { + compatible = "socionext,uniphier-i2c"; + status = "disabled"; + reg = <0x58500000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 43 1>; + clocks = <&iobus_clk>; + clock-frequency = <100000>; + }; + + i2c3: i2c@58580000 { + compatible = "socionext,uniphier-i2c"; + status = "disabled"; + reg = <0x58580000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 44 1>; + clocks = <&iobus_clk>; + clock-frequency = <100000>; + }; + + /* chip-internal connection for DMD */ + i2c4: i2c@58600000 { + compatible = "socionext,uniphier-i2c"; + reg = <0x58600000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 45 1>; + clocks = <&iobus_clk>; + clock-frequency = <400000>; + }; + system-bus-controller-misc@59800000 { compatible = "socionext,uniphier-system-bus-controller-misc", "syscon"; reg = <0x59800000 0x2000>; }; + + usb0: usb@5a800100 { + compatible = "socionext,uniphier-ehci", "generic-ehci"; + status = "disabled"; + reg = <0x5a800100 0x100>; + interrupts = <0 80 4>; + }; + + usb1: usb@5a810100 { + compatible = "socionext,uniphier-ehci", "generic-ehci"; + status = "disabled"; + reg = <0x5a810100 0x100>; + interrupts = <0 81 4>; + }; + + usb2: usb@5a820100 { + compatible = "socionext,uniphier-ehci", "generic-ehci"; + status = "disabled"; + reg = <0x5a820100 0x100>; + interrupts = <0 82 4>; + }; + + usb3: usb@5a830100 { + compatible = "socionext,uniphier-ehci", "generic-ehci"; + status = "disabled"; + reg = <0x5a830100 0x100>; + interrupts = <0 83 4>; + }; }; }; diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts b/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts index dcdc4f74387d..955d417a5c42 100644 --- a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts +++ b/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts @@ -44,6 +44,7 @@ /dts-v1/; /include/ "uniphier-ph1-sld8.dtsi" +/include/ "uniphier-ref-daughter.dtsi" /include/ "uniphier-support-card.dtsi" / { @@ -57,11 +58,18 @@ chosen { bootargs = "console=ttyS0,115200"; - stdout-path = &serialsc; + stdout-path = &serial0; }; aliases { - serial0 = &serialsc; + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; }; }; @@ -74,6 +82,34 @@ ranges = <0x00000000 1 0x03f00000 0x00100000>; }; -&serialsc { +ðsc { interrupts = <0 48 4>; }; + +&serial0 { + status = "okay"; +}; + +&serial2 { + status = "okay"; +}; + +&serial3 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi index baa71e1febb8..58067dfc16e5 100644 --- a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi @@ -64,6 +64,18 @@ compatible = "fixed-clock"; clock-frequency = <50000000>; }; + + uart_clk: uart_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <80000000>; + }; + + iobus_clk: iobus_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <100000000>; + }; }; soc { @@ -79,12 +91,141 @@ #size-cells = <1>; }; + serial0: serial@54006800 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006800 0x40>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + interrupts = <0 33 4>; + clocks = <&uart_clk>; + fifo-size = <64>; + }; + + serial1: serial@54006900 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006900 0x40>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + interrupts = <0 35 4>; + clocks = <&uart_clk>; + fifo-size = <64>; + }; + + serial2: serial@54006a00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006a00 0x40>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + interrupts = <0 37 4>; + clocks = <&uart_clk>; + fifo-size = <64>; + }; + + serial3: serial@54006b00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006b00 0x40>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + interrupts = <0 29 4>; + clocks = <&uart_clk>; + fifo-size = <64>; + }; + + i2c0: i2c@58400000 { + compatible = "socionext,uniphier-i2c"; + status = "disabled"; + reg = <0x58400000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + interrupts = <0 41 1>; + clocks = <&iobus_clk>; + clock-frequency = <100000>; + }; + + i2c1: i2c@58480000 { + compatible = "socionext,uniphier-i2c"; + status = "disabled"; + reg = <0x58480000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + interrupts = <0 42 1>; + clocks = <&iobus_clk>; + clock-frequency = <100000>; + }; + + /* chip-internal connection for DMD */ + i2c2: i2c@58500000 { + compatible = "socionext,uniphier-i2c"; + reg = <0x58500000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + interrupts = <0 43 1>; + clocks = <&iobus_clk>; + clock-frequency = <400000>; + }; + + i2c3: i2c@58580000 { + compatible = "socionext,uniphier-i2c"; + status = "disabled"; + reg = <0x58580000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + interrupts = <0 44 1>; + clocks = <&iobus_clk>; + clock-frequency = <100000>; + }; + system-bus-controller-misc@59800000 { compatible = "socionext,uniphier-system-bus-controller-misc", "syscon"; reg = <0x59800000 0x2000>; }; + usb0: usb@5a800100 { + compatible = "socionext,uniphier-ehci", "generic-ehci"; + status = "disabled"; + reg = <0x5a800100 0x100>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0>; + interrupts = <0 80 4>; + }; + + usb1: usb@5a810100 { + compatible = "socionext,uniphier-ehci", "generic-ehci"; + status = "disabled"; + reg = <0x5a810100 0x100>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1>; + interrupts = <0 81 4>; + }; + + usb2: usb@5a820100 { + compatible = "socionext,uniphier-ehci", "generic-ehci"; + status = "disabled"; + reg = <0x5a820100 0x100>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2>; + interrupts = <0 82 4>; + }; + + pinctrl: pinctrl@5f801000 { + compatible = "socionext,ph1-sld8-pinctrl", + "syscon"; + reg = <0x5f801000 0xe00>; + }; + timer@60000200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x60000200 0x20>; @@ -108,3 +249,5 @@ }; }; }; + +/include/ "uniphier-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/uniphier-pinctrl.dtsi b/arch/arm/boot/dts/uniphier-pinctrl.dtsi new file mode 100644 index 000000000000..f67445f4f10d --- /dev/null +++ b/arch/arm/boot/dts/uniphier-pinctrl.dtsi @@ -0,0 +1,105 @@ +/* + * Device Tree Source for UniPhier SoCs default pinctrl settings + * + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +&pinctrl { + pinctrl_i2c0: i2c0_grp { + groups = "i2c0"; + function = "i2c0"; + }; + + pinctrl_i2c1: i2c1_grp { + groups = "i2c1"; + function = "i2c1"; + }; + + pinctrl_i2c2: i2c2_grp { + groups = "i2c2"; + function = "i2c2"; + }; + + pinctrl_i2c3: i2c3_grp { + groups = "i2c3"; + function = "i2c3"; + }; + + pinctrl_uart0: uart0_grp { + groups = "uart0"; + function = "uart0"; + }; + + pinctrl_uart1: uart1_grp { + groups = "uart1"; + function = "uart1"; + }; + + pinctrl_uart2: uart2_grp { + groups = "uart2"; + function = "uart2"; + }; + + pinctrl_uart3: uart3_grp { + groups = "uart3"; + function = "uart3"; + }; + + pinctrl_usb0: usb0_grp { + groups = "usb0"; + function = "usb0"; + }; + + pinctrl_usb1: usb1_grp { + groups = "usb1"; + function = "usb1"; + }; + + pinctrl_usb2: usb2_grp { + groups = "usb2"; + function = "usb2"; + }; + + pinctrl_usb3: usb3_grp { + groups = "usb3"; + function = "usb3"; + }; +}; diff --git a/arch/arm/boot/dts/uniphier-proxstream2.dtsi b/arch/arm/boot/dts/uniphier-proxstream2.dtsi new file mode 100644 index 000000000000..4c7b24611012 --- /dev/null +++ b/arch/arm/boot/dts/uniphier-proxstream2.dtsi @@ -0,0 +1,273 @@ +/* + * Device Tree Source for UniPhier ProXstream2 SoC + * + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "socionext,proxstream2"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "socionext,uniphier-smp"; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <2>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <3>; + }; + }; + + clocks { + arm_timer_clk: arm_timer_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; + }; + + uart_clk: uart_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <88900000>; + }; + + i2c_clk: i2c_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-parent = <&intc>; + + extbus: extbus { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + }; + + serial0: serial@54006800 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006800 0x40>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + interrupts = <0 33 4>; + clocks = <&uart_clk>; + }; + + serial1: serial@54006900 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006900 0x40>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + interrupts = <0 35 4>; + clocks = <&uart_clk>; + }; + + serial2: serial@54006a00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006a00 0x40>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + interrupts = <0 37 4>; + clocks = <&uart_clk>; + }; + + serial3: serial@54006b00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006b00 0x40>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + interrupts = <0 177 4>; + clocks = <&uart_clk>; + }; + + i2c0: i2c@58780000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58780000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + interrupts = <0 41 4>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; + + i2c1: i2c@58781000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58781000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + interrupts = <0 42 4>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; + + i2c2: i2c@58782000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58782000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + interrupts = <0 43 4>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; + + i2c3: i2c@58783000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58783000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + interrupts = <0 44 4>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; + + /* chip-internal connection for DMD */ + i2c4: i2c@58784000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58784000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 45 4>; + clocks = <&i2c_clk>; + clock-frequency = <400000>; + }; + + /* chip-internal connection for STM */ + i2c5: i2c@58785000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58785000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 25 4>; + clocks = <&i2c_clk>; + clock-frequency = <400000>; + }; + + /* chip-internal connection for HDMI */ + i2c6: i2c@58786000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58786000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 26 4>; + clocks = <&i2c_clk>; + clock-frequency = <400000>; + }; + + system-bus-controller-misc@59800000 { + compatible = "socionext,uniphier-system-bus-controller-misc", + "syscon"; + reg = <0x59800000 0x2000>; + }; + + pinctrl: pinctrl@5f801000 { + compatible = "socionext,proxstream2-pinctrl", "syscon"; + reg = <0x5f801000 0xe00>; + }; + + timer@60000200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x60000200 0x20>; + interrupts = <1 11 0xf04>; + clocks = <&arm_timer_clk>; + }; + + timer@60000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x60000600 0x20>; + interrupts = <1 13 0xf04>; + clocks = <&arm_timer_clk>; + }; + + intc: interrupt-controller@60001000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x60001000 0x1000>, + <0x60000100 0x100>; + }; + }; +}; + +/include/ "uniphier-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/uniphier-ref-daughter.dtsi b/arch/arm/boot/dts/uniphier-ref-daughter.dtsi new file mode 100644 index 000000000000..3d29d2806cc0 --- /dev/null +++ b/arch/arm/boot/dts/uniphier-ref-daughter.dtsi @@ -0,0 +1,50 @@ +/* + * Device Tree Source for UniPhier Reference Daughter Board + * + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +&i2c0 { + eeprom { + compatible = "microchip,24lc128"; + reg = <0x50>; + }; +}; diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index 2efb2058ba49..21b02874bea3 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -101,6 +101,8 @@ clock-names = "refclk", "timclk", "apb_pclk"; #clock-cells = <1>; clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; + assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>; + assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>; }; /* PCI-E I2C bus */ diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index cb3090f919a7..e712c0af149b 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -100,6 +100,8 @@ clock-names = "refclk", "timclk", "apb_pclk"; #clock-cells = <1>; clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; + assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>; + assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>; }; /* PCI-E I2C bus */ diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi index 606753eb72c8..ed65e0f7dfc0 100644 --- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi @@ -9,7 +9,7 @@ / { chosen { - bootargs = "console=ttyLP0,115200"; + stdout-path = "serial0:115200n8"; }; clk16m: clk16m { diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index 4aa335166be7..6865137fd114 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -226,7 +226,10 @@ interrupts = <53 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_ADC0>; clock-names = "adc"; + #io-channel-cells = <1>; status = "disabled"; + fsl,adck-max-frequency = <30000000>, <40000000>, + <20000000>; }; wdoga5: wdog@4003e000 { @@ -242,7 +245,8 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,vf610-qspi"; - reg = <0x40044000 0x1000>; + reg = <0x40044000 0x1000>, <0x20000000 0x10000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_QSPI0_EN>, <&clks VF610_CLK_QSPI0>; @@ -347,6 +351,20 @@ status = "disabled"; }; + i2c1: i2c@40067000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,vf610-i2c"; + reg = <0x40067000 0x1000>; + interrupts = <72 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_I2C1>; + clock-names = "ipg"; + dmas = <&edma0 0 52>, + <&edma0 0 53>; + dma-names = "rx","tx"; + status = "disabled"; + }; + clks: ccm@4006b000 { compatible = "fsl,vf610-ccm"; reg = <0x4006b000 0x1000>; @@ -404,14 +422,13 @@ }; snvs0: snvs@400a7000 { - compatible = "fsl,sec-v4.0-mon", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x400a7000 0x2000>; + compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; + reg = <0x400a7000 0x2000>; - snvsrtc: snvs-rtc-lp@34 { + snvsrtc: snvs-rtc-lp { compatible = "fsl,sec-v4.0-mon-rtc-lp"; - reg = <0x34 0x58>; + regmap = <&snvs0>; + offset = <0x34>; interrupts = <100 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_SNVS>; clock-names = "snvs-rtc"; @@ -442,9 +459,23 @@ interrupts = <54 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_ADC1>; clock-names = "adc"; + #io-channel-cells = <1>; status = "disabled"; }; + esdhc0: esdhc@400b1000 { + compatible = "fsl,imx53-esdhc"; + reg = <0x400b1000 0x1000>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_IPG_BUS>, + <&clks VF610_CLK_PLATFORM_BUS>, + <&clks VF610_CLK_ESDHC0>; + clock-names = "ipg", "ahb", "per"; + status = "disabled"; + fsl,adck-max-frequency = <30000000>, <40000000>, + <20000000>; + }; + esdhc1: esdhc@400b2000 { compatible = "fsl,imx53-esdhc"; reg = <0x400b2000 0x1000>; @@ -488,6 +519,19 @@ status = "disabled"; }; + qspi1: quadspi@400c4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,vf610-qspi"; + reg = <0x400c4000 0x1000>, <0x50000000 0x10000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_QSPI1_EN>, + <&clks VF610_CLK_QSPI1>; + clock-names = "qspi_en", "qspi"; + status = "disabled"; + }; + fec0: ethernet@400d0000 { compatible = "fsl,mvf600-fec"; reg = <0x400d0000 0x1000>; @@ -520,6 +564,33 @@ status = "disabled"; }; + i2c2: i2c@400e6000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,vf610-i2c"; + reg = <0x400e6000 0x1000>; + interrupts = <73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_I2C2>; + clock-names = "ipg"; + dmas = <&edma0 1 36>, + <&edma0 1 37>; + dma-names = "rx","tx"; + status = "disabled"; + }; + + i2c3: i2c@400e7000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,vf610-i2c"; + reg = <0x400e7000 0x1000>; + interrupts = <74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_I2C3>; + clock-names = "ipg"; + dmas = <&edma0 1 38>, + <&edma0 1 39>; + dma-names = "rx","tx"; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 06915080b875..dc0457e40775 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -57,7 +57,7 @@ regulator-always-on; }; - amba { + amba: amba { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -139,6 +139,7 @@ L2: cache-controller@f8f02000 { compatible = "arm,pl310-cache"; reg = <0xF8F02000 0x1000>; + interrupts = <0 2 4>; arm,data-latency = <3 2 2>; arm,tag-latency = <2 2 2>; cache-unified; @@ -258,6 +259,13 @@ reg = <0x100 0x100>; }; + rstc: rstc@200 { + compatible = "xlnx,zynq-reset"; + reg = <0x200 0x48>; + #reset-cells = <1>; + syscon = <&slcr>; + }; + pinctrl0: pinctrl@700 { compatible = "xlnx,pinctrl-zynq"; reg = <0x700 0x200>; diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index fb59d34e8ee6..5df8f81f4217 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -34,6 +34,27 @@ stdout-path = "serial0:115200n8"; }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + sw14 { + label = "sw14"; + gpios = <&gpio0 12 0>; + linux,code = <108>; /* down */ + gpio-key,wakeup; + autorepeat; + }; + sw13 { + label = "sw13"; + gpios = <&gpio0 14 0>; + linux,code = <103>; /* up */ + gpio-key,wakeup; + autorepeat; + }; + }; + leds { compatible = "gpio-leds"; @@ -50,6 +71,13 @@ }; }; +&amba { + ocm: sram@fffc0000 { + compatible = "mmio-sram"; + reg = <0xfffc0000 0x10000>; + }; +}; + &can0 { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index ac521e764d10..b001f7ae67f3 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -324,10 +324,13 @@ CONFIG_SND_USB_AUDIO=m CONFIG_SND_SOC=m CONFIG_SND_EDMA_SOC=m CONFIG_SND_AM33XX_SOC_EVM=m +CONFIG_SND_DAVINCI_SOC_MCASP=m CONFIG_SND_OMAP_SOC=m CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m +CONFIG_SND_SIMPLE_CARD=m +CONFIG_SND_SOC_TLV320AIC3X=m CONFIG_HID_GENERIC=m CONFIG_USB_HIDDEV=y CONFIG_USB_KBD=m diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 1a352f561113..ea56397599c2 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -14,9 +14,18 @@ #include <linux/kernel.h> #include <linux/of_platform.h> #include <linux/ti_wilink_st.h> +#include <linux/wl12xx.h> +#include <linux/mmc/card.h> +#include <linux/mmc/host.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> #include <linux/platform_data/pinctrl-single.h> #include <linux/platform_data/iommu-omap.h> +#include <linux/platform_data/wkup_m3.h> + +#include <asm/siginfo.h> +#include <asm/signal.h> #include "common.h" #include "common-board-devices.h" @@ -25,6 +34,7 @@ #include "omap_device.h" #include "omap-secure.h" #include "soc.h" +#include "hsmmc.h" struct pdata_init { const char *compatible; @@ -268,8 +278,136 @@ static void __init omap3_tao3530_legacy_init(void) { hsmmc2_internal_input_clk(); } + +/* omap3pandora legacy devices */ +#define PANDORA_WIFI_IRQ_GPIO 21 +#define PANDORA_WIFI_NRESET_GPIO 23 + +static struct platform_device pandora_backlight = { + .name = "pandora-backlight", + .id = -1, +}; + +static struct regulator_consumer_supply pandora_vmmc3_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"), +}; + +static struct regulator_init_data pandora_vmmc3 = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(pandora_vmmc3_supply), + .consumer_supplies = pandora_vmmc3_supply, +}; + +static struct fixed_voltage_config pandora_vwlan = { + .supply_name = "vwlan", + .microvolts = 1800000, /* 1.8V */ + .gpio = PANDORA_WIFI_NRESET_GPIO, + .startup_delay = 50000, /* 50ms */ + .enable_high = 1, + .init_data = &pandora_vmmc3, +}; + +static struct platform_device pandora_vwlan_device = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &pandora_vwlan, + }, +}; + +static void pandora_wl1251_init_card(struct mmc_card *card) +{ + /* + * We have TI wl1251 attached to MMC3. Pass this information to + * SDIO core because it can't be probed by normal methods. + */ + if (card->type == MMC_TYPE_SDIO || card->type == MMC_TYPE_SD_COMBO) { + card->quirks |= MMC_QUIRK_NONSTD_SDIO; + card->cccr.wide_bus = 1; + card->cis.vendor = 0x104c; + card->cis.device = 0x9066; + card->cis.blksize = 512; + card->cis.max_dtr = 24000000; + card->ocr = 0x80; + } +} + +static struct omap2_hsmmc_info pandora_mmc3[] = { + { + .mmc = 3, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD, + .gpio_cd = -EINVAL, + .gpio_wp = -EINVAL, + .init_card = pandora_wl1251_init_card, + }, + {} /* Terminator */ +}; + +static void __init pandora_wl1251_init(void) +{ + struct wl1251_platform_data pandora_wl1251_pdata; + int ret; + + memset(&pandora_wl1251_pdata, 0, sizeof(pandora_wl1251_pdata)); + + pandora_wl1251_pdata.power_gpio = -1; + + ret = gpio_request_one(PANDORA_WIFI_IRQ_GPIO, GPIOF_IN, "wl1251 irq"); + if (ret < 0) + goto fail; + + pandora_wl1251_pdata.irq = gpio_to_irq(PANDORA_WIFI_IRQ_GPIO); + if (pandora_wl1251_pdata.irq < 0) + goto fail_irq; + + pandora_wl1251_pdata.use_eeprom = true; + ret = wl1251_set_platform_data(&pandora_wl1251_pdata); + if (ret < 0) + goto fail_irq; + + return; + +fail_irq: + gpio_free(PANDORA_WIFI_IRQ_GPIO); +fail: + pr_err("wl1251 board initialisation failed\n"); +} + +static void __init omap3_pandora_legacy_init(void) +{ + platform_device_register(&pandora_backlight); + platform_device_register(&pandora_vwlan_device); + omap_hsmmc_init(pandora_mmc3); + omap_hsmmc_late_init(pandora_mmc3); + pandora_wl1251_init(); +} #endif /* CONFIG_ARCH_OMAP3 */ +#ifdef CONFIG_SOC_TI81XX +static int fault_fixed_up; + +static int t410_abort_handler(unsigned long addr, unsigned int fsr, + struct pt_regs *regs) +{ + if ((fsr == 0x406 || fsr == 0xc06) && !fault_fixed_up) { + pr_warn("External imprecise Data abort at addr=%#lx, fsr=%#x ignored.\n", + addr, fsr); + fault_fixed_up = 1; + return 0; + } + + return 1; +} + +static void __init t410_abort_init(void) +{ + hook_fault_code(16 + 6, t410_abort_handler, SIGBUS, BUS_OBJERR, + "imprecise external abort"); +} +#endif + #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) static struct iommu_platform_data omap4_iommu_pdata = { .reset_name = "mmu_cache", @@ -278,6 +416,14 @@ static struct iommu_platform_data omap4_iommu_pdata = { }; #endif +#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX) +static struct wkup_m3_platform_data wkup_m3_data = { + .reset_name = "wkup_m3", + .assert_reset = omap_device_assert_hardreset, + .deassert_reset = omap_device_deassert_hardreset, +}; +#endif + #ifdef CONFIG_SOC_OMAP5 static void __init omap5_uevm_legacy_init(void) { @@ -340,6 +486,10 @@ static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0", &am35xx_emac_pdata), #endif +#ifdef CONFIG_SOC_AM33XX + OF_DEV_AUXDATA("ti,am3352-wkup-m3", 0x44d00000, "44d00000.wkup_m3", + &wkup_m3_data), +#endif #ifdef CONFIG_ARCH_OMAP4 OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a100040, "4a100040.pinmux", &pcs_pdata), OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a31e040, "4a31e040.pinmux", &pcs_pdata), @@ -353,6 +503,8 @@ static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = { #endif #ifdef CONFIG_SOC_AM43XX OF_DEV_AUXDATA("ti,am437-padconf", 0x44e10800, "44e10800.pinmux", &pcs_pdata), + OF_DEV_AUXDATA("ti,am4372-wkup-m3", 0x44d00000, "44d00000.wkup_m3", + &wkup_m3_data), #endif #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu", @@ -381,6 +533,11 @@ static struct pdata_init pdata_quirks[] __initdata = { { "ti,omap3-evm-37xx", omap3_evm_legacy_init, }, { "ti,am3517-evm", am3517_evm_legacy_init, }, { "technexion,omap3-tao3530", omap3_tao3530_legacy_init, }, + { "openpandora,omap3-pandora-600mhz", omap3_pandora_legacy_init, }, + { "openpandora,omap3-pandora-1ghz", omap3_pandora_legacy_init, }, +#endif +#ifdef CONFIG_SOC_TI81XX + { "hp,t410", t410_abort_init, }, #endif #ifdef CONFIG_SOC_OMAP5 { "ti,omap5-uevm", omap5_uevm_legacy_init, }, diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index 2412efb6cdd9..08d2be2ea41f 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -78,11 +78,11 @@ config MACH_LINKSTATION_LSCHL Buffalo Linkstation Live v3 (LS-CHL) platform. config MACH_LINKSTATION_MINI - bool "Buffalo Linkstation Mini" - select I2C_BOARDINFO + bool "Buffalo Linkstation Mini (Flattened Device Tree)" + select ARCH_ORION5X_DT help Say 'Y' here if you want your kernel to support the - Buffalo Linkstation Mini platform. + Buffalo Linkstation Mini (LS-WSGL) platform. config MACH_LINKSTATION_LS_HGL bool "Buffalo Linkstation LS-HGL" diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile index a40b5c9a58c4..a1e0fbe6a7a1 100644 --- a/arch/arm/mach-orion5x/Makefile +++ b/arch/arm/mach-orion5x/Makefile @@ -4,7 +4,6 @@ obj-$(CONFIG_MACH_RD88F5182) += rd88f5182-setup.o obj-$(CONFIG_MACH_KUROBOX_PRO) += kurobox_pro-setup.o obj-$(CONFIG_MACH_TERASTATION_PRO2) += terastation_pro2-setup.o obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o -obj-$(CONFIG_MACH_LINKSTATION_MINI) += lsmini-setup.o obj-$(CONFIG_MACH_LINKSTATION_LS_HGL) += ls_hgl-setup.o obj-$(CONFIG_MACH_DNS323) += dns323-setup.o obj-$(CONFIG_MACH_TS209) += ts209-setup.o tsx09-common.o diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c deleted file mode 100644 index a6493e76f96d..000000000000 --- a/arch/arm/mach-orion5x/lsmini-setup.c +++ /dev/null @@ -1,280 +0,0 @@ -/* - * arch/arm/mach-orion5x/lsmini-setup.c - * - * Maintainer: Alexey Kopytko <alexey@kopytko.ru> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/mv643xx_eth.h> -#include <linux/leds.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/i2c.h> -#include <linux/ata_platform.h> -#include <linux/gpio.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <mach/orion5x.h> -#include "common.h" -#include "mpp.h" - -/***************************************************************************** - * Linkstation Mini Info - ****************************************************************************/ - -/* - * 256K NOR flash Device bus boot chip select - */ - -#define LSMINI_NOR_BOOT_BASE 0xf4000000 -#define LSMINI_NOR_BOOT_SIZE SZ_256K - -/***************************************************************************** - * 256KB NOR Flash on BOOT Device - ****************************************************************************/ - -static struct physmap_flash_data lsmini_nor_flash_data = { - .width = 1, -}; - -static struct resource lsmini_nor_flash_resource = { - .flags = IORESOURCE_MEM, - .start = LSMINI_NOR_BOOT_BASE, - .end = LSMINI_NOR_BOOT_BASE + LSMINI_NOR_BOOT_SIZE - 1, -}; - -static struct platform_device lsmini_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &lsmini_nor_flash_data, - }, - .num_resources = 1, - .resource = &lsmini_nor_flash_resource, -}; - -/***************************************************************************** - * Ethernet - ****************************************************************************/ - -static struct mv643xx_eth_platform_data lsmini_eth_data = { - .phy_addr = 8, -}; - -/***************************************************************************** - * RTC 5C372a on I2C bus - ****************************************************************************/ - -static struct i2c_board_info __initdata lsmini_i2c_rtc = { - I2C_BOARD_INFO("rs5c372a", 0x32), -}; - -/***************************************************************************** - * LEDs attached to GPIO - ****************************************************************************/ - -#define LSMINI_GPIO_LED_ALARM 2 -#define LSMINI_GPIO_LED_INFO 3 -#define LSMINI_GPIO_LED_FUNC 9 -#define LSMINI_GPIO_LED_PWR 14 - -static struct gpio_led lsmini_led_pins[] = { - { - .name = "alarm:red", - .gpio = LSMINI_GPIO_LED_ALARM, - .active_low = 1, - }, { - .name = "info:amber", - .gpio = LSMINI_GPIO_LED_INFO, - .active_low = 1, - }, { - .name = "func:blue:top", - .gpio = LSMINI_GPIO_LED_FUNC, - .active_low = 1, - }, { - .name = "power:blue:bottom", - .gpio = LSMINI_GPIO_LED_PWR, - }, -}; - -static struct gpio_led_platform_data lsmini_led_data = { - .leds = lsmini_led_pins, - .num_leds = ARRAY_SIZE(lsmini_led_pins), -}; - -static struct platform_device lsmini_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &lsmini_led_data, - }, -}; - -/**************************************************************************** - * GPIO Attached Keys - ****************************************************************************/ - -#define LSMINI_GPIO_KEY_FUNC 15 -#define LSMINI_GPIO_KEY_POWER 18 -#define LSMINI_GPIO_KEY_AUTOPOWER 17 - -#define LSMINI_SW_POWER 0x00 -#define LSMINI_SW_AUTOPOWER 0x01 - -static struct gpio_keys_button lsmini_buttons[] = { - { - .code = KEY_OPTION, - .gpio = LSMINI_GPIO_KEY_FUNC, - .desc = "Function Button", - .active_low = 1, - }, { - .type = EV_SW, - .code = LSMINI_SW_POWER, - .gpio = LSMINI_GPIO_KEY_POWER, - .desc = "Power-on Switch", - .active_low = 1, - }, { - .type = EV_SW, - .code = LSMINI_SW_AUTOPOWER, - .gpio = LSMINI_GPIO_KEY_AUTOPOWER, - .desc = "Power-auto Switch", - .active_low = 1, - }, -}; - -static struct gpio_keys_platform_data lsmini_button_data = { - .buttons = lsmini_buttons, - .nbuttons = ARRAY_SIZE(lsmini_buttons), -}; - -static struct platform_device lsmini_button_device = { - .name = "gpio-keys", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &lsmini_button_data, - }, -}; - - -/***************************************************************************** - * SATA - ****************************************************************************/ -static struct mv_sata_platform_data lsmini_sata_data = { - .n_ports = 2, -}; - - -/***************************************************************************** - * Linkstation Mini specific power off method: reboot - ****************************************************************************/ -/* - * On the Linkstation Mini, the shutdown process is following: - * - Userland monitors key events until the power switch goes to off position - * - The board reboots - * - U-boot starts and goes into an idle mode waiting for the user - * to move the switch to ON position - */ - -static void lsmini_power_off(void) -{ - orion5x_restart(REBOOT_HARD, NULL); -} - - -/***************************************************************************** - * General Setup - ****************************************************************************/ - -#define LSMINI_GPIO_USB_POWER 16 -#define LSMINI_GPIO_AUTO_POWER 17 -#define LSMINI_GPIO_POWER 18 - -#define LSMINI_GPIO_HDD_POWER0 1 -#define LSMINI_GPIO_HDD_POWER1 19 - -static unsigned int lsmini_mpp_modes[] __initdata = { - MPP0_UNUSED, /* LED_RESERVE1 (unused) */ - MPP1_GPIO, /* HDD_PWR */ - MPP2_GPIO, /* LED_ALARM */ - MPP3_GPIO, /* LED_INFO */ - MPP4_UNUSED, - MPP5_UNUSED, - MPP6_UNUSED, - MPP7_UNUSED, - MPP8_UNUSED, - MPP9_GPIO, /* LED_FUNC */ - MPP10_UNUSED, - MPP11_UNUSED, /* LED_ETH (dummy) */ - MPP12_UNUSED, - MPP13_UNUSED, - MPP14_GPIO, /* LED_PWR */ - MPP15_GPIO, /* FUNC */ - MPP16_GPIO, /* USB_PWR */ - MPP17_GPIO, /* AUTO_POWER */ - MPP18_GPIO, /* POWER */ - MPP19_GPIO, /* HDD_PWR1 */ - 0, -}; - -static void __init lsmini_init(void) -{ - /* - * Setup basic Orion functions. Need to be called early. - */ - orion5x_init(); - - orion5x_mpp_conf(lsmini_mpp_modes); - - /* - * Configure peripherals. - */ - orion5x_ehci0_init(); - orion5x_ehci1_init(); - orion5x_eth_init(&lsmini_eth_data); - orion5x_i2c_init(); - orion5x_sata_init(&lsmini_sata_data); - orion5x_uart0_init(); - orion5x_xor_init(); - - mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, - ORION_MBUS_DEVBUS_BOOT_ATTR, - LSMINI_NOR_BOOT_BASE, - LSMINI_NOR_BOOT_SIZE); - platform_device_register(&lsmini_nor_flash); - - platform_device_register(&lsmini_button_device); - - platform_device_register(&lsmini_leds); - - i2c_register_board_info(0, &lsmini_i2c_rtc, 1); - - /* enable USB power */ - gpio_set_value(LSMINI_GPIO_USB_POWER, 1); - - /* register power-off method */ - pm_power_off = lsmini_power_off; - - pr_info("%s: finished\n", __func__); -} - -#ifdef CONFIG_MACH_LINKSTATION_MINI -MACHINE_START(LINKSTATION_MINI, "Buffalo Linkstation Mini") - /* Maintainer: Alexey Kopytko <alexey@kopytko.ru> */ - .atag_offset = 0x100, - .init_machine = lsmini_init, - .map_io = orion5x_map_io, - .init_early = orion5x_init_early, - .init_irq = orion5x_init_irq, - .init_time = orion5x_timer_init, - .fixup = tag_fixup_mem32, - .restart = orion5x_restart, -MACHINE_END -#endif diff --git a/drivers/clk/ti/clk-43xx.c b/drivers/clk/ti/clk-43xx.c index 72411fbcb6f3..097fc90bf19a 100644 --- a/drivers/clk/ti/clk-43xx.c +++ b/drivers/clk/ti/clk-43xx.c @@ -74,6 +74,7 @@ static struct ti_dt_clk am43xx_clks[] = { DT_CLK(NULL, "clk_24mhz", "clk_24mhz"), DT_CLK(NULL, "cpsw_125mhz_gclk", "cpsw_125mhz_gclk"), DT_CLK(NULL, "cpsw_cpts_rft_clk", "cpsw_cpts_rft_clk"), + DT_CLK(NULL, "dpll_clksel_mac_clk", "dpll_clksel_mac_clk"), DT_CLK(NULL, "gpio0_dbclk_mux_ck", "gpio0_dbclk_mux_ck"), DT_CLK(NULL, "gpio0_dbclk", "gpio0_dbclk"), DT_CLK(NULL, "gpio1_dbclk", "gpio1_dbclk"), diff --git a/drivers/pinctrl/pinctrl-tegra.c b/drivers/pinctrl/pinctrl-tegra.c index 0f982b829be1..0fd7fd2b0f72 100644 --- a/drivers/pinctrl/pinctrl-tegra.c +++ b/drivers/pinctrl/pinctrl-tegra.c @@ -624,6 +624,22 @@ static struct pinctrl_desc tegra_pinctrl_desc = { .owner = THIS_MODULE, }; +static bool gpio_node_has_range(void) +{ + struct device_node *np; + bool has_prop = false; + + np = of_find_compatible_node(NULL, NULL, "nvidia,tegra30-gpio"); + if (!np) + return has_prop; + + has_prop = of_find_property(np, "gpio-ranges", NULL); + + of_node_put(np); + + return has_prop; +} + int tegra_pinctrl_probe(struct platform_device *pdev, const struct tegra_pinctrl_soc_data *soc_data) { @@ -708,7 +724,8 @@ int tegra_pinctrl_probe(struct platform_device *pdev, return PTR_ERR(pmx->pctl); } - pinctrl_add_gpio_range(pmx->pctl, &tegra_pinctrl_gpio_range); + if (!gpio_node_has_range()) + pinctrl_add_gpio_range(pmx->pctl, &tegra_pinctrl_gpio_range); platform_set_drvdata(pdev, pmx); diff --git a/include/dt-bindings/clock/r8a7790-clock.h b/include/dt-bindings/clock/r8a7790-clock.h index ff7ca3584e16..7b1ad8922eec 100644 --- a/include/dt-bindings/clock/r8a7790-clock.h +++ b/include/dt-bindings/clock/r8a7790-clock.h @@ -108,6 +108,7 @@ #define R8A7790_CLK_VIN2 9 #define R8A7790_CLK_VIN1 10 #define R8A7790_CLK_VIN0 11 +#define R8A7790_CLK_ETHERAVB 12 #define R8A7790_CLK_ETHER 13 #define R8A7790_CLK_SATA1 14 #define R8A7790_CLK_SATA0 15 @@ -143,6 +144,8 @@ #define R8A7790_CLK_SCU_ALL 17 #define R8A7790_CLK_SCU_DVC1 18 #define R8A7790_CLK_SCU_DVC0 19 +#define R8A7790_CLK_SCU_CTU1_MIX1 20 +#define R8A7790_CLK_SCU_CTU0_MIX0 21 #define R8A7790_CLK_SCU_SRC9 22 #define R8A7790_CLK_SCU_SRC8 23 #define R8A7790_CLK_SCU_SRC7 24 diff --git a/include/dt-bindings/clock/r8a7791-clock.h b/include/dt-bindings/clock/r8a7791-clock.h index 402268384b99..dd09b73c4aaf 100644 --- a/include/dt-bindings/clock/r8a7791-clock.h +++ b/include/dt-bindings/clock/r8a7791-clock.h @@ -141,6 +141,8 @@ #define R8A7791_CLK_SCU_ALL 17 #define R8A7791_CLK_SCU_DVC1 18 #define R8A7791_CLK_SCU_DVC0 19 +#define R8A7791_CLK_SCU_CTU1_MIX1 20 +#define R8A7791_CLK_SCU_CTU0_MIX0 21 #define R8A7791_CLK_SCU_SRC9 22 #define R8A7791_CLK_SCU_SRC8 23 #define R8A7791_CLK_SCU_SRC7 24 diff --git a/include/dt-bindings/clock/r8a7793-clock.h b/include/dt-bindings/clock/r8a7793-clock.h new file mode 100644 index 000000000000..1579e07f96a3 --- /dev/null +++ b/include/dt-bindings/clock/r8a7793-clock.h @@ -0,0 +1,164 @@ +/* + * r8a7793 clock definition + * + * Copyright (C) 2014 Renesas Electronics Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __DT_BINDINGS_CLOCK_R8A7793_H__ +#define __DT_BINDINGS_CLOCK_R8A7793_H__ + +/* CPG */ +#define R8A7793_CLK_MAIN 0 +#define R8A7793_CLK_PLL0 1 +#define R8A7793_CLK_PLL1 2 +#define R8A7793_CLK_PLL3 3 +#define R8A7793_CLK_LB 4 +#define R8A7793_CLK_QSPI 5 +#define R8A7793_CLK_SDH 6 +#define R8A7793_CLK_SD0 7 +#define R8A7793_CLK_Z 8 +#define R8A7793_CLK_RCAN 9 +#define R8A7793_CLK_ADSP 10 + +/* MSTP0 */ +#define R8A7793_CLK_MSIOF0 0 + +/* MSTP1 */ +#define R8A7793_CLK_VCP0 1 +#define R8A7793_CLK_VPC0 3 +#define R8A7793_CLK_SSP1 9 +#define R8A7793_CLK_TMU1 11 +#define R8A7793_CLK_3DG 12 +#define R8A7793_CLK_2DDMAC 15 +#define R8A7793_CLK_FDP1_1 18 +#define R8A7793_CLK_FDP1_0 19 +#define R8A7793_CLK_TMU3 21 +#define R8A7793_CLK_TMU2 22 +#define R8A7793_CLK_CMT0 24 +#define R8A7793_CLK_TMU0 25 +#define R8A7793_CLK_VSP1_DU1 27 +#define R8A7793_CLK_VSP1_DU0 28 +#define R8A7793_CLK_VSP1_S 31 + +/* MSTP2 */ +#define R8A7793_CLK_SCIFA2 2 +#define R8A7793_CLK_SCIFA1 3 +#define R8A7793_CLK_SCIFA0 4 +#define R8A7793_CLK_MSIOF2 5 +#define R8A7793_CLK_SCIFB0 6 +#define R8A7793_CLK_SCIFB1 7 +#define R8A7793_CLK_MSIOF1 8 +#define R8A7793_CLK_SCIFB2 16 +#define R8A7793_CLK_SYS_DMAC1 18 +#define R8A7793_CLK_SYS_DMAC0 19 + +/* MSTP3 */ +#define R8A7793_CLK_TPU0 4 +#define R8A7793_CLK_SDHI2 11 +#define R8A7793_CLK_SDHI1 12 +#define R8A7793_CLK_SDHI0 14 +#define R8A7793_CLK_MMCIF0 15 +#define R8A7793_CLK_IIC0 18 +#define R8A7793_CLK_PCIEC 19 +#define R8A7793_CLK_IIC1 23 +#define R8A7793_CLK_SSUSB 28 +#define R8A7793_CLK_CMT1 29 +#define R8A7793_CLK_USBDMAC0 30 +#define R8A7793_CLK_USBDMAC1 31 + +/* MSTP4 */ +#define R8A7793_CLK_IRQC 7 + +/* MSTP5 */ +#define R8A7793_CLK_AUDIO_DMAC1 1 +#define R8A7793_CLK_AUDIO_DMAC0 2 +#define R8A7793_CLK_ADSP_MOD 6 +#define R8A7793_CLK_THERMAL 22 +#define R8A7793_CLK_PWM 23 + +/* MSTP7 */ +#define R8A7793_CLK_EHCI 3 +#define R8A7793_CLK_HSUSB 4 +#define R8A7793_CLK_HSCIF2 13 +#define R8A7793_CLK_SCIF5 14 +#define R8A7793_CLK_SCIF4 15 +#define R8A7793_CLK_HSCIF1 16 +#define R8A7793_CLK_HSCIF0 17 +#define R8A7793_CLK_SCIF3 18 +#define R8A7793_CLK_SCIF2 19 +#define R8A7793_CLK_SCIF1 20 +#define R8A7793_CLK_SCIF0 21 +#define R8A7793_CLK_DU1 23 +#define R8A7793_CLK_DU0 24 +#define R8A7793_CLK_LVDS0 26 + +/* MSTP8 */ +#define R8A7793_CLK_IPMMU_SGX 0 +#define R8A7793_CLK_VIN2 9 +#define R8A7793_CLK_VIN1 10 +#define R8A7793_CLK_VIN0 11 +#define R8A7793_CLK_ETHER 13 +#define R8A7793_CLK_SATA1 14 +#define R8A7793_CLK_SATA0 15 + +/* MSTP9 */ +#define R8A7793_CLK_GPIO7 4 +#define R8A7793_CLK_GPIO6 5 +#define R8A7793_CLK_GPIO5 7 +#define R8A7793_CLK_GPIO4 8 +#define R8A7793_CLK_GPIO3 9 +#define R8A7793_CLK_GPIO2 10 +#define R8A7793_CLK_GPIO1 11 +#define R8A7793_CLK_GPIO0 12 +#define R8A7793_CLK_RCAN1 15 +#define R8A7793_CLK_RCAN0 16 +#define R8A7793_CLK_QSPI_MOD 17 +#define R8A7793_CLK_I2C5 25 +#define R8A7793_CLK_IICDVFS 26 +#define R8A7793_CLK_I2C4 27 +#define R8A7793_CLK_I2C3 28 +#define R8A7793_CLK_I2C2 29 +#define R8A7793_CLK_I2C1 30 +#define R8A7793_CLK_I2C0 31 + +/* MSTP10 */ +#define R8A7793_CLK_SSI_ALL 5 +#define R8A7793_CLK_SSI9 6 +#define R8A7793_CLK_SSI8 7 +#define R8A7793_CLK_SSI7 8 +#define R8A7793_CLK_SSI6 9 +#define R8A7793_CLK_SSI5 10 +#define R8A7793_CLK_SSI4 11 +#define R8A7793_CLK_SSI3 12 +#define R8A7793_CLK_SSI2 13 +#define R8A7793_CLK_SSI1 14 +#define R8A7793_CLK_SSI0 15 +#define R8A7793_CLK_SCU_ALL 17 +#define R8A7793_CLK_SCU_DVC1 18 +#define R8A7793_CLK_SCU_DVC0 19 +#define R8A7793_CLK_SCU_SRC9 22 +#define R8A7793_CLK_SCU_SRC8 23 +#define R8A7793_CLK_SCU_SRC7 24 +#define R8A7793_CLK_SCU_SRC6 25 +#define R8A7793_CLK_SCU_SRC5 26 +#define R8A7793_CLK_SCU_SRC4 27 +#define R8A7793_CLK_SCU_SRC3 28 +#define R8A7793_CLK_SCU_SRC2 29 +#define R8A7793_CLK_SCU_SRC1 30 +#define R8A7793_CLK_SCU_SRC0 31 + +/* MSTP11 */ +#define R8A7793_CLK_SCIFA3 6 +#define R8A7793_CLK_SCIFA4 7 +#define R8A7793_CLK_SCIFA5 8 + +#endif /* __DT_BINDINGS_CLOCK_R8A7793_H__ */ diff --git a/include/dt-bindings/pinctrl/am43xx.h b/include/dt-bindings/pinctrl/am43xx.h index b00bbc9c60b4..774dc1e843c5 100644 --- a/include/dt-bindings/pinctrl/am43xx.h +++ b/include/dt-bindings/pinctrl/am43xx.h @@ -14,6 +14,7 @@ #define MUX_MODE6 6 #define MUX_MODE7 7 #define MUX_MODE8 8 +#define MUX_MODE9 9 #define PULL_DISABLE (1 << 16) #define PULL_UP (1 << 17) diff --git a/include/dt-bindings/pinctrl/dra.h b/include/dt-bindings/pinctrl/dra.h index 7448edff4723..4379e29f0460 100644 --- a/include/dt-bindings/pinctrl/dra.h +++ b/include/dt-bindings/pinctrl/dra.h @@ -30,6 +30,26 @@ #define MUX_MODE14 0xe #define MUX_MODE15 0xf +/* Certain pins need virtual mode, but note: they may glitch */ +#define MUX_VIRTUAL_MODE0 (MODE_SELECT | (0x0 << 4)) +#define MUX_VIRTUAL_MODE1 (MODE_SELECT | (0x1 << 4)) +#define MUX_VIRTUAL_MODE2 (MODE_SELECT | (0x2 << 4)) +#define MUX_VIRTUAL_MODE3 (MODE_SELECT | (0x3 << 4)) +#define MUX_VIRTUAL_MODE4 (MODE_SELECT | (0x4 << 4)) +#define MUX_VIRTUAL_MODE5 (MODE_SELECT | (0x5 << 4)) +#define MUX_VIRTUAL_MODE6 (MODE_SELECT | (0x6 << 4)) +#define MUX_VIRTUAL_MODE7 (MODE_SELECT | (0x7 << 4)) +#define MUX_VIRTUAL_MODE8 (MODE_SELECT | (0x8 << 4)) +#define MUX_VIRTUAL_MODE9 (MODE_SELECT | (0x9 << 4)) +#define MUX_VIRTUAL_MODE10 (MODE_SELECT | (0xa << 4)) +#define MUX_VIRTUAL_MODE11 (MODE_SELECT | (0xb << 4)) +#define MUX_VIRTUAL_MODE12 (MODE_SELECT | (0xc << 4)) +#define MUX_VIRTUAL_MODE13 (MODE_SELECT | (0xd << 4)) +#define MUX_VIRTUAL_MODE14 (MODE_SELECT | (0xe << 4)) +#define MUX_VIRTUAL_MODE15 (MODE_SELECT | (0xf << 4)) + +#define MODE_SELECT (1 << 8) + #define PULL_ENA (0 << 16) #define PULL_DIS (1 << 16) #define PULL_UP (1 << 17) diff --git a/include/dt-bindings/reset/altr,rst-mgr-a10.h b/include/dt-bindings/reset/altr,rst-mgr-a10.h new file mode 100644 index 000000000000..acb0bbf4f9f5 --- /dev/null +++ b/include/dt-bindings/reset/altr,rst-mgr-a10.h @@ -0,0 +1,110 @@ +/* + * Copyright (c) 2014, Steffen Trumtrar <s.trumtrar@pengutronix.de> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _DT_BINDINGS_RESET_ALTR_RST_MGR_A10_H +#define _DT_BINDINGS_RESET_ALTR_RST_MGR_A10_H + +/* MPUMODRST */ +#define CPU0_RESET 0 +#define CPU1_RESET 1 +#define WDS_RESET 2 +#define SCUPER_RESET 3 + +/* PER0MODRST */ +#define EMAC0_RESET 32 +#define EMAC1_RESET 33 +#define EMAC2_RESET 34 +#define USB0_RESET 35 +#define USB1_RESET 36 +#define NAND_RESET 37 +#define QSPI_RESET 38 +#define SDMMC_RESET 39 +#define EMAC0_OCP_RESET 40 +#define EMAC1_OCP_RESET 41 +#define EMAC2_OCP_RESET 42 +#define USB0_OCP_RESET 43 +#define USB1_OCP_RESET 44 +#define NAND_OCP_RESET 45 +#define QSPI_OCP_RESET 46 +#define SDMMC_OCP_RESET 47 +#define DMA_RESET 48 +#define SPIM0_RESET 49 +#define SPIM1_RESET 50 +#define SPIS0_RESET 51 +#define SPIS1_RESET 52 +#define DMA_OCP_RESET 53 +#define EMAC_PTP_RESET 54 +/* 55 is empty*/ +#define DMAIF0_RESET 56 +#define DMAIF1_RESET 57 +#define DMAIF2_RESET 58 +#define DMAIF3_RESET 59 +#define DMAIF4_RESET 60 +#define DMAIF5_RESET 61 +#define DMAIF6_RESET 62 +#define DMAIF7_RESET 63 + +/* PER1MODRST */ +#define L4WD0_RESET 64 +#define L4WD1_RESET 65 +#define L4SYSTIMER0_RESET 66 +#define L4SYSTIMER1_RESET 67 +#define SPTIMER0_RESET 68 +#define SPTIMER1_RESET 69 +/* 70-71 is reserved */ +#define I2C0_RESET 72 +#define I2C1_RESET 73 +#define I2C2_RESET 74 +#define I2C3_RESET 75 +#define I2C4_RESET 76 +/* 77-79 is reserved */ +#define UART0_RESET 80 +#define UART1_RESET 81 +/* 82-87 is reserved */ +#define GPIO0_RESET 88 +#define GPIO1_RESET 89 +#define GPIO2_RESET 90 + +/* BRGMODRST */ +#define HPS2FPGA_RESET 96 +#define LWHPS2FPGA_RESET 97 +#define FPGA2HPS_RESET 98 +#define F2SSDRAM0_RESET 99 +#define F2SSDRAM1_RESET 100 +#define F2SSDRAM2_RESET 101 +#define DDRSCH_RESET 102 + +/* SYSMODRST*/ +#define ROM_RESET 128 +#define OCRAM_RESET 129 +/* 130 is reserved */ +#define FPGAMGR_RESET 131 +#define S2F_RESET 132 +#define SYSDBG_RESET 133 +#define OCRAM_OCP_RESET 134 + +/* COLDMODRST */ +#define CLKMGRCOLD_RESET 160 +/* 161-162 is reserved */ +#define S2FCOLD_RESET 163 +#define TIMESTAMPCOLD_RESET 164 +#define TAPCOLD_RESET 165 +#define HMCCOLD_RESET 166 +#define IOMGRCOLD_RESET 167 + +/* NRSTMODRST */ +#define NRSTPINOE_RESET 192 + +/* DBGMODRST */ +#define DBG_RESET 224 +#endif |