diff options
24 files changed, 25 insertions, 25 deletions
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml index d50a60368e27..04a8c37b4aff 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-dummy-source.yaml @@ -17,7 +17,7 @@ description: | The Coresight dummy source component is for the specific coresight source devices kernel don't have permission to access or configure. For some SOCs, there would be Coresight source trace components on sub-processor which - are conneted to AP processor via debug bus. For these devices, a dummy driver + are connected to AP processor via debug bus. For these devices, a dummy driver is needed to register them as Coresight source devices, so that paths can be created in the driver. It provides Coresight API for operations on dummy source devices, such as enabling and disabling them. It also provides the diff --git a/Documentation/devicetree/bindings/cpu/idle-states.yaml b/Documentation/devicetree/bindings/cpu/idle-states.yaml index 239480ef7c30..385b0a511652 100644 --- a/Documentation/devicetree/bindings/cpu/idle-states.yaml +++ b/Documentation/devicetree/bindings/cpu/idle-states.yaml @@ -385,7 +385,7 @@ patternProperties: This property is required in idle state nodes of device tree meant for RISC-V systems. For more details on the suspend_type parameter - refer the SBI specifiation v0.3 (or higher) [7]. + refer the SBI specification v0.3 (or higher) [7]. local-timer-stop: description: diff --git a/Documentation/devicetree/bindings/display/lvds.yaml b/Documentation/devicetree/bindings/display/lvds.yaml index 224db4932011..b74efbea3be2 100644 --- a/Documentation/devicetree/bindings/display/lvds.yaml +++ b/Documentation/devicetree/bindings/display/lvds.yaml @@ -16,7 +16,7 @@ maintainers: description: This binding extends the data mapping defined in lvds-data-mapping.yaml. It supports reversing the bit order on the formats defined there in order - to accomodate for even more specialized data formats, since a variety of + to accommodate for even more specialized data formats, since a variety of data formats and layouts is used to drive LVDS displays. properties: diff --git a/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt b/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt index 47e477cce6d2..1f9831540c97 100644 --- a/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt +++ b/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt @@ -20,7 +20,7 @@ Optional properties: memcpy channels in eDMA. Notes: -When requesting channel via ti,dra7-dma-crossbar, the DMA clinet must request +When requesting channel via ti,dra7-dma-crossbar, the DMA client must request the DMA event number as crossbar ID (input to the DMA crossbar). For ti,am335x-edma-crossbar: the meaning of parameters of dmas for clients: diff --git a/Documentation/devicetree/bindings/iio/accel/lis302.txt b/Documentation/devicetree/bindings/iio/accel/lis302.txt index 764e28ec1a0a..457539647f36 100644 --- a/Documentation/devicetree/bindings/iio/accel/lis302.txt +++ b/Documentation/devicetree/bindings/iio/accel/lis302.txt @@ -36,7 +36,7 @@ Optional properties for all bus drivers: - st,irq{1,2}-disable: disable IRQ 1/2 - st,irq{1,2}-ff-wu-1: raise IRQ 1/2 on FF_WU_1 condition - st,irq{1,2}-ff-wu-2: raise IRQ 1/2 on FF_WU_2 condition - - st,irq{1,2}-data-ready: raise IRQ 1/2 on data ready contition + - st,irq{1,2}-data-ready: raise IRQ 1/2 on data ready condition - st,irq{1,2}-click: raise IRQ 1/2 on click condition - st,irq-open-drain: consider IRQ lines open-drain - st,irq-active-low: make IRQ lines active low diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml index 0f4a062c9d6f..5f051c666cbe 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml @@ -60,7 +60,7 @@ properties: The 4th cell is a phandle to a node describing a set of CPUs this interrupt is affine to. The interrupt must be a PPI, and the node pointed must be a subnode of the "ppi-partitions" subnode. For - interrupt types other than PPI or PPIs that are not partitionned, + interrupt types other than PPI or PPIs that are not partitioned, this cell must be zero. See the "ppi-partitions" node description below. diff --git a/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml b/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml index 54d6d1f08e24..17e971903ee9 100644 --- a/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml +++ b/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml @@ -66,7 +66,7 @@ patternProperties: IMAXled = 160000 * (592 / 600.5) * (1 / max-current-switch-number) And the minimum output current formula: IMINled = 3300 * (592 / 600.5) * (1 / max-current-switch-number) - where max-current-switch-number is determinated by led configuration + where max-current-switch-number is determined by led configuration and depends on how leds are physically connected to the led driver. allOf: diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt index c80065a1eb97..bf0c998b8603 100644 --- a/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt +++ b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt @@ -24,7 +24,7 @@ Required properties: number of completion messages for which FlexRM will inject one MSI interrupt to CPU. - The 3nd cell contains MSI timer value representing time for + The 3rd cell contains MSI timer value representing time for which FlexRM will wait to accumulate N completion messages where N is the value specified by 2nd cell above. If FlexRM does not get required number of completion messages in time diff --git a/Documentation/devicetree/bindings/media/i2c/thine,thp7312.yaml b/Documentation/devicetree/bindings/media/i2c/thine,thp7312.yaml index 1978fbb77a6c..535acf2b88a9 100644 --- a/Documentation/devicetree/bindings/media/i2c/thine,thp7312.yaml +++ b/Documentation/devicetree/bindings/media/i2c/thine,thp7312.yaml @@ -16,7 +16,7 @@ description: can be connected to CMOS image sensors from various vendors, supporting both MIPI CSI-2 and parallel interfaces. It can also output on either MIPI CSI-2 or parallel. The hardware is capable of transmitting and receiving MIPI - interlaved data strams with data types or multiple virtual channel + interleaved data streams with data types or multiple virtual channel identifiers. allOf: diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4210-fimc.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4210-fimc.yaml index 271d0577a83c..2ba27b230559 100644 --- a/Documentation/devicetree/bindings/media/samsung,exynos4210-fimc.yaml +++ b/Documentation/devicetree/bindings/media/samsung,exynos4210-fimc.yaml @@ -77,7 +77,7 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32-array maxItems: 2 description: | - An array specyfing minimum image size in pixels at the FIMC input and + An array specifying minimum image size in pixels at the FIMC input and output DMA, in the first and second cell respectively. Default value is <16 16>. diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml index d381125a0a15..efee3de0d9ad 100644 --- a/Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml @@ -25,7 +25,7 @@ properties: description: The PMIC provides intb and errb IRQ lines. The errb IRQ line is used for fatal IRQs which will cause the PMIC to shut down power outputs. - In many systems this will shut down the SoC contolling the PMIC and + In many systems this will shut down the SoC controlling the PMIC and connecting/handling the errb can be omitted. However, there are cases where the SoC is not powered by the PMIC or has a short time backup energy to handle shutdown of critical hardware. In that case it may be diff --git a/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml index bc8b5940b1c5..a4be642de33c 100644 --- a/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml +++ b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml @@ -53,7 +53,7 @@ properties: samsung,s2mps11-wrstbi-ground: description: | Indicates that WRSTBI pin of PMIC is pulled down. When the system is - suspended it will always go down thus triggerring unwanted buck warm + suspended it will always go down thus triggering unwanted buck warm reset (setting buck voltages to default values). type: boolean diff --git a/Documentation/devicetree/bindings/mfd/twl6040.txt b/Documentation/devicetree/bindings/mfd/twl6040.txt index 06e9dd7a0d96..dfd8683ede0c 100644 --- a/Documentation/devicetree/bindings/mfd/twl6040.txt +++ b/Documentation/devicetree/bindings/mfd/twl6040.txt @@ -2,7 +2,7 @@ Texas Instruments TWL6040 family The TWL6040s are 8-channel high quality low-power audio codecs providing audio, vibra and GPO functionality on OMAP4+ platforms. -They are connected ot the host processor via i2c for commands, McPDM for audio +They are connected to the host processor via i2c for commands, McPDM for audio data and commands. Required properties: diff --git a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml index 67f95e60ed3a..bd789ceb41be 100644 --- a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml +++ b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml @@ -72,7 +72,7 @@ properties: description: VDD_RFA_CMN supply regulator handle vddrfa0p8-supply: - description: VDD_RFA_0P8 suppply regulator handle + description: VDD_RFA_0P8 supply regulator handle vddrfa1p7-supply: description: VDD_RFA_1P7 supply regulator handle diff --git a/Documentation/devicetree/bindings/phy/apm-xgene-phy.txt b/Documentation/devicetree/bindings/phy/apm-xgene-phy.txt index e1bb12711fbf..602cf952b92b 100644 --- a/Documentation/devicetree/bindings/phy/apm-xgene-phy.txt +++ b/Documentation/devicetree/bindings/phy/apm-xgene-phy.txt @@ -36,7 +36,7 @@ Optional properties: 3-tuple setting for each (up to 3) supported link speed on the host. Range is 0 to 273000 in unit of uV. Default is 0. -- apm,tx-pre-cursor2 : 2st pre-cursor emphasis taps control. Two set of +- apm,tx-pre-cursor2 : 2nd pre-cursor emphasis taps control. Two set of 3-tuple setting for each (up to 3) supported link speed on the host. Range is 0 to 127400 in unit uV. Default is 0x0. diff --git a/Documentation/devicetree/bindings/phy/mediatek,mt7988-xfi-tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,mt7988-xfi-tphy.yaml index cfb3ca97f87c..cc9d0d4eeeeb 100644 --- a/Documentation/devicetree/bindings/phy/mediatek,mt7988-xfi-tphy.yaml +++ b/Documentation/devicetree/bindings/phy/mediatek,mt7988-xfi-tphy.yaml @@ -41,7 +41,7 @@ properties: description: One instance of the T-PHY on MT7988 suffers from a performance problem in 10GBase-R mode which needs a work-around in the driver. - This flag enables a work-around ajusting an analog phy setting and + This flag enables a work-around adjusting an analog phy setting and is required for XFI Port0 of the MT7988 SoC to be in compliance with the SFP specification. diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml index acba0720125d..423b7c4e62f2 100644 --- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml +++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml @@ -240,7 +240,7 @@ patternProperties: The force mode is used to manually switch the shared phy mode between USB3 and PCIe, when USB3 phy type is selected by the consumer, and force-mode is set, will cause phy's power and pipe toggled and force - phy as USB3 mode which switched from default PCIe mode. But perfer to + phy as USB3 mode which switched from default PCIe mode. But prefer to use the property "mediatek,syscon-type" for newer SoCs that support it. type: boolean diff --git a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml index 90d79491e281..d16a543a7848 100644 --- a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml @@ -43,7 +43,7 @@ properties: qcom,tune-usb2-amplitude: $ref: /schemas/types.yaml#/definitions/uint8 - description: High-Speed trasmit amplitude + description: High-Speed transmit amplitude minimum: 0 maximum: 15 default: 8 diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml index e1eb45a9eda4..a28d77748095 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml @@ -11,7 +11,7 @@ maintainers: - Alexandre TORGUE <alexandre.torgue@foss.st.com> description: | - STMicroelectronics's STM32 MCUs intregrate a GPIO and Pin mux/config hardware + STMicroelectronics's STM32 MCUs integrate a GPIO and Pin mux/config hardware controller. It controls the input/output settings on the available pins and also provides ability to multiplex and configure the output of various on-chip controllers onto these pads. @@ -164,7 +164,7 @@ patternProperties: This macro is available here: - include/dt-bindings/pinctrl/stm32-pinfunc.h Some examples of using macro: - /* GPIO A9 set as alernate function 2 */ + /* GPIO A9 set as alternate function 2 */ ... { pinmux = <STM32_PINMUX('A', 9, AF2)>; }; diff --git a/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml b/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml index c5dc3c2820d7..adc6b3f36fde 100644 --- a/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml +++ b/Documentation/devicetree/bindings/remoteproc/mtk,scp.yaml @@ -93,7 +93,7 @@ patternProperties: Each SCP core has own cache memory. The SRAM and L1TCM are shared by cores. The power of cache, SRAM and L1TCM power should be enabled before booting SCP cores. The size of cache, SRAM, and L1TCM are varied - on differnt SoCs. + on different SoCs. The SCP cores do not use an MMU, but has a set of registers to control the translations between 32-bit CPU addresses into system bus diff --git a/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.yaml b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.yaml index a5d67563cd53..29d48da81531 100644 --- a/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.yaml +++ b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.yaml @@ -78,7 +78,7 @@ properties: we use nvidia,adjust-baud-rates. As an example, consider there is deviation observed in TX for baud rates as listed below. 0 - to 9600 has 1% deviation 9600 to 115200 2% deviation. This slight deviation is expcted and + to 9600 has 1% deviation 9600 to 115200 2% deviation. This slight deviation is expected and Tegra UART is expected to handle it. Due to the issue stated above, baud rate on Tegra UART should be set equal to or above deviation observed for avoiding frame errors. Property should be set like this: diff --git a/Documentation/devicetree/bindings/sound/everest,es8326.yaml b/Documentation/devicetree/bindings/sound/everest,es8326.yaml index 8c82d47375ec..d51431df7acf 100644 --- a/Documentation/devicetree/bindings/sound/everest,es8326.yaml +++ b/Documentation/devicetree/bindings/sound/everest,es8326.yaml @@ -32,7 +32,7 @@ properties: description: | just the value of reg 57. Bit(3) decides whether the jack polarity is inverted. Bit(2) decides whether the button on the headset is inverted. - Bit(1)/(0) decides the mic properity to be OMTP/CTIA or auto. + Bit(1)/(0) decides the mic property to be OMTP/CTIA or auto. minimum: 0x00 maximum: 0x0f default: 0x0f diff --git a/Documentation/devicetree/bindings/sound/st,sta350.txt b/Documentation/devicetree/bindings/sound/st,sta350.txt index 307398ef2317..e3d84864e0e4 100644 --- a/Documentation/devicetree/bindings/sound/st,sta350.txt +++ b/Documentation/devicetree/bindings/sound/st,sta350.txt @@ -77,7 +77,7 @@ Optional properties: - st,odd-pwm-speed-mode: If present, PWM speed mode run on odd speed mode (341.3 kHz) on all - channels. If not present, normal PWM spped mode (384 kHz) will be used. + channels. If not present, normal PWM speed mode (384 kHz) will be used. - st,distortion-compensation: If present, distortion compensation variable uses DCC coefficient. diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml index 72048c5a0412..f188fd6b6fbf 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml @@ -310,7 +310,7 @@ examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> - // Example 1 (new calbiration data: for pre v1 IP): + // Example 1 (new calibration data: for pre v1 IP): thermal-sensor@4a9000 { compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1"; reg = <0x4a9000 0x1000>, /* TM */ |