5 files changed, 130 insertions, 147 deletions

diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h
index a4aeeaace040..517847a94dbe 100644
--- a/arch/x86/include/asm/hw_irq.h
+++ b/arch/x86/include/asm/hw_irq.h
@@ -47,9 +47,9 @@ enum irq_alloc_type {
 struct ioapic_alloc_info {
 	int				pin;
 	int				node;
-	u32				trigger : 1;
-	u32				polarity : 1;
-	u32				valid : 1;
+	u32				is_level	: 1;
+	u32				active_low	: 1;
+	u32				valid		: 1;
 	struct IO_APIC_route_entry	*entry;
 };
 
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index c6d92d2570d0..24a7bba7cbf4 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -89,12 +89,12 @@ struct irq_pin_list {
 };
 
 struct mp_chip_data {
-	struct list_head irq_2_pin;
-	struct IO_APIC_route_entry entry;
-	int trigger;
-	int polarity;
+	struct list_head		irq_2_pin;
+	struct IO_APIC_route_entry	entry;
+	bool				is_level;
+	bool				active_low;
+	bool				isa_irq;
 	u32 count;
-	bool isa_irq;
 };
 
 struct mp_ioapic_gsi {
@@ -745,44 +745,7 @@ static int __init find_isa_irq_apic(int irq, int type)
 	return -1;
 }
 
-#ifdef CONFIG_EISA
-/*
- * EISA Edge/Level control register, ELCR
- */
-static int EISA_ELCR(unsigned int irq)
-{
-	if (irq < nr_legacy_irqs()) {
-		unsigned int port = 0x4d0 + (irq >> 3);
-		return (inb(port) >> (irq & 7)) & 1;
-	}
-	apic_printk(APIC_VERBOSE, KERN_INFO
-			"Broken MPtable reports ISA irq %d\n", irq);
-	return 0;
-}
-
-#endif
-
-/* ISA interrupts are always active high edge triggered,
- * when listed as conforming in the MP table. */
-
-#define default_ISA_trigger(idx)	(IOAPIC_EDGE)
-#define default_ISA_polarity(idx)	(IOAPIC_POL_HIGH)
-
-/* EISA interrupts are always polarity zero and can be edge or level
- * trigger depending on the ELCR value.  If an interrupt is listed as
- * EISA conforming in the MP table, that means its trigger type must
- * be read in from the ELCR */
-
-#define default_EISA_trigger(idx)	(EISA_ELCR(mp_irqs[idx].srcbusirq))
-#define default_EISA_polarity(idx)	default_ISA_polarity(idx)
-
-/* PCI interrupts are always active low level triggered,
- * when listed as conforming in the MP table. */
-
-#define default_PCI_trigger(idx)	(IOAPIC_LEVEL)
-#define default_PCI_polarity(idx)	(IOAPIC_POL_LOW)
-
-static int irq_polarity(int idx)
+static bool irq_active_low(int idx)
 {
 	int bus = mp_irqs[idx].srcbus;
 
@@ -791,90 +754,139 @@ static int irq_polarity(int idx)
 	 */
 	switch (mp_irqs[idx].irqflag & MP_IRQPOL_MASK) {
 	case MP_IRQPOL_DEFAULT:
-		/* conforms to spec, ie. bus-type dependent polarity */
-		if (test_bit(bus, mp_bus_not_pci))
-			return default_ISA_polarity(idx);
-		else
-			return default_PCI_polarity(idx);
+		/*
+		 * Conforms to spec, ie. bus-type dependent polarity.  PCI
+		 * defaults to low active. [E]ISA defaults to high active.
+		 */
+		return !test_bit(bus, mp_bus_not_pci);
 	case MP_IRQPOL_ACTIVE_HIGH:
-		return IOAPIC_POL_HIGH;
+		return false;
 	case MP_IRQPOL_RESERVED:
 		pr_warn("IOAPIC: Invalid polarity: 2, defaulting to low\n");
 		fallthrough;
 	case MP_IRQPOL_ACTIVE_LOW:
 	default: /* Pointless default required due to do gcc stupidity */
-		return IOAPIC_POL_LOW;
+		return true;
 	}
 }
 
 #ifdef CONFIG_EISA
-static int eisa_irq_trigger(int idx, int bus, int trigger)
+/*
+ * EISA Edge/Level control register, ELCR
+ */
+static bool EISA_ELCR(unsigned int irq)
+{
+	if (irq < nr_legacy_irqs()) {
+		unsigned int port = 0x4d0 + (irq >> 3);
+		return (inb(port) >> (irq & 7)) & 1;
+	}
+	apic_printk(APIC_VERBOSE, KERN_INFO
+			"Broken MPtable reports ISA irq %d\n", irq);
+	return false;
+}
+
+/*
+ * EISA interrupts are always active high and can be edge or level
+ * triggered depending on the ELCR value.  If an interrupt is listed as
+ * EISA conforming in the MP table, that means its trigger type must be
+ * read in from the ELCR.
+ */
+static bool eisa_irq_is_level(int idx, int bus, bool level)
 {
 	switch (mp_bus_id_to_type[bus]) {
 	case MP_BUS_PCI:
 	case MP_BUS_ISA:
-		return trigger;
+		return level;
 	case MP_BUS_EISA:
-		return default_EISA_trigger(idx);
+		return EISA_ELCR(mp_irqs[idx].srcbusirq);
 	}
 	pr_warn("IOAPIC: Invalid srcbus: %d defaulting to level\n", bus);
-	return IOAPIC_LEVEL;
+	return true;
 }
 #else
-static inline int eisa_irq_trigger(int idx, int bus, int trigger)
+static inline int eisa_irq_is_level(int idx, int bus, bool level)
 {
-	return trigger;
+	return level;
 }
 #endif
 
-static int irq_trigger(int idx)
+static bool irq_is_level(int idx)
 {
 	int bus = mp_irqs[idx].srcbus;
-	int trigger;
+	bool level;
 
 	/*
 	 * Determine IRQ trigger mode (edge or level sensitive):
 	 */
 	switch (mp_irqs[idx].irqflag & MP_IRQTRIG_MASK) {
 	case MP_IRQTRIG_DEFAULT:
-		/* conforms to spec, ie. bus-type dependent trigger mode */
-		if (test_bit(bus, mp_bus_not_pci))
-			trigger = default_ISA_trigger(idx);
-		else
-			trigger = default_PCI_trigger(idx);
+		/*
+		 * Conforms to spec, ie. bus-type dependent trigger
+		 * mode. PCI defaults to egde, ISA to level.
+		 */
+		level = test_bit(bus, mp_bus_not_pci);
 		/* Take EISA into account */
-		return eisa_irq_trigger(idx, bus, trigger);
+		return eisa_irq_is_level(idx, bus, level);
 	case MP_IRQTRIG_EDGE:
-		return IOAPIC_EDGE;
+		return false;
 	case MP_IRQTRIG_RESERVED:
 		pr_warn("IOAPIC: Invalid trigger mode 2 defaulting to level\n");
 		fallthrough;
 	case MP_IRQTRIG_LEVEL:
 	default: /* Pointless default required due to do gcc stupidity */
-		return IOAPIC_LEVEL;
+		return true;
 	}
 }
 
+static int __acpi_get_override_irq(u32 gsi, bool *trigger, bool *polarity)
+{
+	int ioapic, pin, idx;
+
+	if (skip_ioapic_setup)
+		return -1;
+
+	ioapic = mp_find_ioapic(gsi);
+	if (ioapic < 0)
+		return -1;
+
+	pin = mp_find_ioapic_pin(ioapic, gsi);
+	if (pin < 0)
+		return -1;
+
+	idx = find_irq_entry(ioapic, pin, mp_INT);
+	if (idx < 0)
+		return -1;
+
+	*trigger = irq_is_level(idx);
+	*polarity = irq_active_low(idx);
+	return 0;
+}
+
+#ifdef CONFIG_ACPI
+int acpi_get_override_irq(u32 gsi, int *is_level, int *active_low)
+{
+	*is_level = *active_low = 0;
+	return __acpi_get_override_irq(gsi, (bool *)is_level,
+				       (bool *)active_low);
+}
+#endif
+
 void ioapic_set_alloc_attr(struct irq_alloc_info *info, int node,
 			   int trigger, int polarity)
 {
 	init_irq_alloc_info(info, NULL);
 	info->type = X86_IRQ_ALLOC_TYPE_IOAPIC;
 	info->ioapic.node = node;
-	info->ioapic.trigger = trigger;
-	info->ioapic.polarity = polarity;
+	info->ioapic.is_level = trigger;
+	info->ioapic.active_low = polarity;
 	info->ioapic.valid = 1;
 }
 
-#ifndef CONFIG_ACPI
-int acpi_get_override_irq(u32 gsi, int *trigger, int *polarity);
-#endif
-
 static void ioapic_copy_alloc_attr(struct irq_alloc_info *dst,
 				   struct irq_alloc_info *src,
 				   u32 gsi, int ioapic_idx, int pin)
 {
-	int trigger, polarity;
+	bool level, pol_low;
 
 	copy_irq_alloc_info(dst, src);
 	dst->type = X86_IRQ_ALLOC_TYPE_IOAPIC;
@@ -883,20 +895,20 @@ static void ioapic_copy_alloc_attr(struct irq_alloc_info *dst,
 	dst->ioapic.valid = 1;
 	if (src && src->ioapic.valid) {
 		dst->ioapic.node = src->ioapic.node;
-		dst->ioapic.trigger = src->ioapic.trigger;
-		dst->ioapic.polarity = src->ioapic.polarity;
+		dst->ioapic.is_level = src->ioapic.is_level;
+		dst->ioapic.active_low = src->ioapic.active_low;
 	} else {
 		dst->ioapic.node = NUMA_NO_NODE;
-		if (acpi_get_override_irq(gsi, &trigger, &polarity) >= 0) {
-			dst->ioapic.trigger = trigger;
-			dst->ioapic.polarity = polarity;
+		if (__acpi_get_override_irq(gsi, &level, &pol_low) >= 0) {
+			dst->ioapic.is_level = level;
+			dst->ioapic.active_low = pol_low;
 		} else {
 			/*
 			 * PCI interrupts are always active low level
 			 * triggered.
 			 */
-			dst->ioapic.trigger = IOAPIC_LEVEL;
-			dst->ioapic.polarity = IOAPIC_POL_LOW;
+			dst->ioapic.is_level = true;
+			dst->ioapic.active_low = true;
 		}
 	}
 }
@@ -906,12 +918,12 @@ static int ioapic_alloc_attr_node(struct irq_alloc_info *info)
 	return (info && info->ioapic.valid) ? info->ioapic.node : NUMA_NO_NODE;
 }
 
-static void mp_register_handler(unsigned int irq, unsigned long trigger)
+static void mp_register_handler(unsigned int irq, bool level)
 {
 	irq_flow_handler_t hdl;
 	bool fasteoi;
 
-	if (trigger) {
+	if (level) {
 		irq_set_status_flags(irq, IRQ_LEVEL);
 		fasteoi = true;
 	} else {
@@ -933,14 +945,14 @@ static bool mp_check_pin_attr(int irq, struct irq_alloc_info *info)
 	 * pin with real trigger and polarity attributes.
 	 */
 	if (irq < nr_legacy_irqs() && data->count == 1) {
-		if (info->ioapic.trigger != data->trigger)
-			mp_register_handler(irq, info->ioapic.trigger);
-		data->entry.trigger = data->trigger = info->ioapic.trigger;
-		data->entry.polarity = data->polarity = info->ioapic.polarity;
+		if (info->ioapic.is_level != data->is_level)
+			mp_register_handler(irq, info->ioapic.is_level);
+		data->entry.trigger = data->is_level = info->ioapic.is_level;
+		data->entry.polarity = data->active_low = info->ioapic.active_low;
 	}
 
-	return data->trigger == info->ioapic.trigger &&
-	       data->polarity == info->ioapic.polarity;
+	return data->is_level == info->ioapic.is_level &&
+	       data->active_low == info->ioapic.active_low;
 }
 
 static int alloc_irq_from_domain(struct irq_domain *domain, int ioapic, u32 gsi,
@@ -2179,9 +2191,9 @@ static inline void __init check_timer(void)
 			 * so only need to unmask if it is level-trigger
 			 * do we really have level trigger timer?
 			 */
-			int idx;
-			idx = find_irq_entry(apic1, pin1, mp_INT);
-			if (idx != -1 && irq_trigger(idx))
+			int idx = find_irq_entry(apic1, pin1, mp_INT);
+
+			if (idx != -1 && irq_is_level(idx))
 				unmask_ioapic_irq(irq_get_irq_data(0));
 		}
 		irq_domain_deactivate_irq(irq_data);
@@ -2588,30 +2600,6 @@ static int io_apic_get_version(int ioapic)
 	return reg_01.bits.version;
 }
 
-int acpi_get_override_irq(u32 gsi, int *trigger, int *polarity)
-{
-	int ioapic, pin, idx;
-
-	if (skip_ioapic_setup)
-		return -1;
-
-	ioapic = mp_find_ioapic(gsi);
-	if (ioapic < 0)
-		return -1;
-
-	pin = mp_find_ioapic_pin(ioapic, gsi);
-	if (pin < 0)
-		return -1;
-
-	idx = find_irq_entry(ioapic, pin, mp_INT);
-	if (idx < 0)
-		return -1;
-
-	*trigger = irq_trigger(idx);
-	*polarity = irq_polarity(idx);
-	return 0;
-}
-
 /*
  * This function updates target affinity of IOAPIC interrupts to include
  * the CPUs which came online during SMP bringup.
@@ -2935,13 +2923,13 @@ static void mp_irqdomain_get_attr(u32 gsi, struct mp_chip_data *data,
 				  struct irq_alloc_info *info)
 {
 	if (info && info->ioapic.valid) {
-		data->trigger = info->ioapic.trigger;
-		data->polarity = info->ioapic.polarity;
-	} else if (acpi_get_override_irq(gsi, &data->trigger,
-					 &data->polarity) < 0) {
+		data->is_level = info->ioapic.is_level;
+		data->active_low = info->ioapic.active_low;
+	} else if (__acpi_get_override_irq(gsi, &data->is_level,
+					   &data->active_low) < 0) {
 		/* PCI interrupts are always active low level triggered. */
-		data->trigger = IOAPIC_LEVEL;
-		data->polarity = IOAPIC_POL_LOW;
+		data->is_level = true;
+		data->active_low = true;
 	}
 }
 
@@ -2953,16 +2941,13 @@ static void mp_setup_entry(struct irq_cfg *cfg, struct mp_chip_data *data,
 	entry->dest_mode     = apic->dest_mode_logical;
 	entry->dest	     = cfg->dest_apicid;
 	entry->vector	     = cfg->vector;
-	entry->trigger	     = data->trigger;
-	entry->polarity	     = data->polarity;
+	entry->trigger	     = data->is_level;
+	entry->polarity	     = data->active_low;
 	/*
 	 * Mask level triggered irqs. Edge triggered irqs are masked
 	 * by the irq core code in case they fire.
 	 */
-	if (data->trigger == IOAPIC_LEVEL)
-		entry->mask = IOAPIC_MASKED;
-	else
-		entry->mask = IOAPIC_UNMASKED;
+	entry->mask = data->is_level;
 }
 
 int mp_irqdomain_alloc(struct irq_domain *domain, unsigned int virq,
@@ -3010,7 +2995,7 @@ int mp_irqdomain_alloc(struct irq_domain *domain, unsigned int virq,
 	local_irq_save(flags);
 	if (info->ioapic.entry)
 		mp_setup_entry(cfg, data, info->ioapic.entry);
-	mp_register_handler(virq, data->trigger);
+	mp_register_handler(virq, data->is_level);
 	if (virq < nr_legacy_irqs())
 		legacy_pic->mask(virq);
 	local_irq_restore(flags);
@@ -3018,7 +3003,8 @@ int mp_irqdomain_alloc(struct irq_domain *domain, unsigned int virq,
 	apic_printk(APIC_VERBOSE, KERN_DEBUG
 		    "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> IRQ %d Mode:%i Active:%i Dest:%d)\n",
 		    ioapic, mpc_ioapic_id(ioapic), pin, cfg->vector,
-		    virq, data->trigger, data->polarity, cfg->dest_apicid);
+		    virq, data->is_level, data->active_low,
+		    cfg->dest_apicid);
 
 	return 0;
 }
diff --git a/arch/x86/pci/intel_mid_pci.c b/arch/x86/pci/intel_mid_pci.c
index 24ca4ee2802f..95e2e6bd8d8c 100644
--- a/arch/x86/pci/intel_mid_pci.c
+++ b/arch/x86/pci/intel_mid_pci.c
@@ -215,7 +215,7 @@ static int pci_write(struct pci_bus *bus, unsigned int devfn, int where,
 static int intel_mid_pci_irq_enable(struct pci_dev *dev)
 {
 	struct irq_alloc_info info;
-	int polarity;
+	bool polarity_low;
 	int ret;
 	u8 gsi;
 
@@ -230,7 +230,7 @@ static int intel_mid_pci_irq_enable(struct pci_dev *dev)
 
 	switch (intel_mid_identify_cpu()) {
 	case INTEL_MID_CPU_CHIP_TANGIER:
-		polarity = IOAPIC_POL_HIGH;
+		polarity_low = false;
 
 		/* Special treatment for IRQ0 */
 		if (gsi == 0) {
@@ -252,11 +252,11 @@ static int intel_mid_pci_irq_enable(struct pci_dev *dev)
 		}
 		break;
 	default:
-		polarity = IOAPIC_POL_LOW;
+		polarity_low = true;
 		break;
 	}
 
-	ioapic_set_alloc_attr(&info, dev_to_node(&dev->dev), 1, polarity);
+	ioapic_set_alloc_attr(&info, dev_to_node(&dev->dev), 1, polarity_low);
 
 	/*
 	 * MRST only have IOAPIC, the PCI irq lines are 1:1 mapped to
diff --git a/drivers/iommu/amd/iommu.c b/drivers/iommu/amd/iommu.c
index 473de0920b64..b0e5210e53b2 100644
--- a/drivers/iommu/amd/iommu.c
+++ b/drivers/iommu/amd/iommu.c
@@ -3687,13 +3687,11 @@ static void irq_remapping_prepare_irte(struct amd_ir_data *data,
 		entry = info->ioapic.entry;
 		info->ioapic.entry = NULL;
 		memset(entry, 0, sizeof(*entry));
-		entry->vector        = index;
-		entry->mask          = 0;
-		entry->trigger       = info->ioapic.trigger;
-		entry->polarity      = info->ioapic.polarity;
+		entry->vector	= index;
+		entry->trigger	= info->ioapic.is_level;
+		entry->polarity	= info->ioapic.active_low;
 		/* Mask level triggered irqs. */
-		if (info->ioapic.trigger)
-			entry->mask = 1;
+		entry->mask	= info->ioapic.is_level;
 		break;
 
 	case X86_IRQ_ALLOC_TYPE_HPET:
diff --git a/drivers/iommu/intel/irq_remapping.c b/drivers/iommu/intel/irq_remapping.c
index 30269b738fa5..54ca69333445 100644
--- a/drivers/iommu/intel/irq_remapping.c
+++ b/drivers/iommu/intel/irq_remapping.c
@@ -1306,11 +1306,10 @@ static void intel_irq_remapping_prepare_irte(struct intel_ir_data *data,
 		 * irq handler will do the explicit EOI to the io-apic.
 		 */
 		entry->vector	= info->ioapic.pin;
-		entry->mask	= 0;			/* enable IRQ */
-		entry->trigger	= info->ioapic.trigger;
-		entry->polarity	= info->ioapic.polarity;
-		if (info->ioapic.trigger)
-			entry->mask = 1; /* Mask level triggered irqs. */
+		entry->trigger	= info->ioapic.is_level;
+		entry->polarity	= info->ioapic.active_low;
+		/* Mask level triggered irqs. */
+		entry->mask	= info->ioapic.is_level;
 		break;
 
 	case X86_IRQ_ALLOC_TYPE_HPET: