13 files changed, 378 insertions, 76 deletions

diff --git a/Documentation/devicetree/bindings/ata/pata-common.yaml b/Documentation/devicetree/bindings/ata/pata-common.yaml
index 337ddf1113c4..4e867dd4d402 100644
--- a/Documentation/devicetree/bindings/ata/pata-common.yaml
+++ b/Documentation/devicetree/bindings/ata/pata-common.yaml
@@ -38,6 +38,7 @@ patternProperties:
       ID number 0 and the slave drive will have ID number 1. The PATA port
       nodes will be named "ide-port".
     type: object
+    additionalProperties: false
 
     properties:
       reg:
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 0072e0f9ad39..d8cc1e27a125 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1973,6 +1973,96 @@ retry:
 }
 
 /**
+ *	ata_dev_power_set_standby - Set a device power mode to standby
+ *	@dev: target device
+ *
+ *	Issue a STANDBY IMMEDIATE command to set a device power mode to standby.
+ *	For an HDD device, this spins down the disks.
+ *
+ *	LOCKING:
+ *	Kernel thread context (may sleep).
+ */
+void ata_dev_power_set_standby(struct ata_device *dev)
+{
+	unsigned long ap_flags = dev->link->ap->flags;
+	struct ata_taskfile tf;
+	unsigned int err_mask;
+
+	/* Issue STANDBY IMMEDIATE command only if supported by the device */
+	if (dev->class != ATA_DEV_ATA && dev->class != ATA_DEV_ZAC)
+		return;
+
+	/*
+	 * Some odd clown BIOSes issue spindown on power off (ACPI S4 or S5)
+	 * causing some drives to spin up and down again. For these, do nothing
+	 * if we are being called on shutdown.
+	 */
+	if ((ap_flags & ATA_FLAG_NO_POWEROFF_SPINDOWN) &&
+	    system_state == SYSTEM_POWER_OFF)
+		return;
+
+	if ((ap_flags & ATA_FLAG_NO_HIBERNATE_SPINDOWN) &&
+	    system_entering_hibernation())
+		return;
+
+	ata_tf_init(dev, &tf);
+	tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR;
+	tf.protocol = ATA_PROT_NODATA;
+	tf.command = ATA_CMD_STANDBYNOW1;
+
+	ata_dev_notice(dev, "Entering standby power mode\n");
+
+	err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
+	if (err_mask)
+		ata_dev_err(dev, "STANDBY IMMEDIATE failed (err_mask=0x%x)\n",
+			    err_mask);
+}
+
+/**
+ *	ata_dev_power_set_active -  Set a device power mode to active
+ *	@dev: target device
+ *
+ *	Issue a VERIFY command to enter to ensure that the device is in the
+ *	active power mode. For a spun-down HDD (standby or idle power mode),
+ *	the VERIFY command will complete after the disk spins up.
+ *
+ *	LOCKING:
+ *	Kernel thread context (may sleep).
+ */
+void ata_dev_power_set_active(struct ata_device *dev)
+{
+	struct ata_taskfile tf;
+	unsigned int err_mask;
+
+	/*
+	 * Issue READ VERIFY SECTORS command for 1 sector at lba=0 only
+	 * if supported by the device.
+	 */
+	if (dev->class != ATA_DEV_ATA && dev->class != ATA_DEV_ZAC)
+		return;
+
+	ata_tf_init(dev, &tf);
+	tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR;
+	tf.protocol = ATA_PROT_NODATA;
+	tf.command = ATA_CMD_VERIFY;
+	tf.nsect = 1;
+	if (dev->flags & ATA_DFLAG_LBA) {
+		tf.flags |= ATA_TFLAG_LBA;
+		tf.device |= ATA_LBA;
+	} else {
+		/* CHS */
+		tf.lbal = 0x1; /* sect */
+	}
+
+	ata_dev_notice(dev, "Entering active power mode\n");
+
+	err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
+	if (err_mask)
+		ata_dev_err(dev, "VERIFY failed (err_mask=0x%x)\n",
+			    err_mask);
+}
+
+/**
  *	ata_read_log_page - read a specific log page
  *	@dev: target device
  *	@log: log to read
@@ -2529,7 +2619,7 @@ static int ata_dev_config_lba(struct ata_device *dev)
 {
 	const u16 *id = dev->id;
 	const char *lba_desc;
-	char ncq_desc[24];
+	char ncq_desc[32];
 	int ret;
 
 	dev->flags |= ATA_DFLAG_LBA;
@@ -5037,17 +5127,19 @@ static void ata_port_request_pm(struct ata_port *ap, pm_message_t mesg,
 	struct ata_link *link;
 	unsigned long flags;
 
-	/* Previous resume operation might still be in
-	 * progress.  Wait for PM_PENDING to clear.
+	spin_lock_irqsave(ap->lock, flags);
+
+	/*
+	 * A previous PM operation might still be in progress. Wait for
+	 * ATA_PFLAG_PM_PENDING to clear.
 	 */
 	if (ap->pflags & ATA_PFLAG_PM_PENDING) {
+		spin_unlock_irqrestore(ap->lock, flags);
 		ata_port_wait_eh(ap);
-		WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING);
+		spin_lock_irqsave(ap->lock, flags);
 	}
 
-	/* request PM ops to EH */
-	spin_lock_irqsave(ap->lock, flags);
-
+	/* Request PM operation to EH */
 	ap->pm_mesg = mesg;
 	ap->pflags |= ATA_PFLAG_PM_PENDING;
 	ata_for_each_link(link, ap, HOST_FIRST) {
@@ -5059,10 +5151,8 @@ static void ata_port_request_pm(struct ata_port *ap, pm_message_t mesg,
 
 	spin_unlock_irqrestore(ap->lock, flags);
 
-	if (!async) {
+	if (!async)
 		ata_port_wait_eh(ap);
-		WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING);
-	}
 }
 
 /*
@@ -5078,11 +5168,27 @@ static const unsigned int ata_port_suspend_ehi = ATA_EHI_QUIET
 
 static void ata_port_suspend(struct ata_port *ap, pm_message_t mesg)
 {
+	/*
+	 * We are about to suspend the port, so we do not care about
+	 * scsi_rescan_device() calls scheduled by previous resume operations.
+	 * The next resume will schedule the rescan again. So cancel any rescan
+	 * that is not done yet.
+	 */
+	cancel_delayed_work_sync(&ap->scsi_rescan_task);
+
 	ata_port_request_pm(ap, mesg, 0, ata_port_suspend_ehi, false);
 }
 
 static void ata_port_suspend_async(struct ata_port *ap, pm_message_t mesg)
 {
+	/*
+	 * We are about to suspend the port, so we do not care about
+	 * scsi_rescan_device() calls scheduled by previous resume operations.
+	 * The next resume will schedule the rescan again. So cancel any rescan
+	 * that is not done yet.
+	 */
+	cancel_delayed_work_sync(&ap->scsi_rescan_task);
+
 	ata_port_request_pm(ap, mesg, 0, ata_port_suspend_ehi, true);
 }
 
@@ -5229,7 +5335,7 @@ EXPORT_SYMBOL_GPL(ata_host_resume);
 #endif
 
 const struct device_type ata_port_type = {
-	.name = "ata_port",
+	.name = ATA_PORT_TYPE_NAME,
 #ifdef CONFIG_PM
 	.pm = &ata_port_pm_ops,
 #endif
@@ -5948,11 +6054,30 @@ static void ata_port_detach(struct ata_port *ap)
 	struct ata_link *link;
 	struct ata_device *dev;
 
-	/* tell EH we're leaving & flush EH */
+	/* Wait for any ongoing EH */
+	ata_port_wait_eh(ap);
+
+	mutex_lock(&ap->scsi_scan_mutex);
 	spin_lock_irqsave(ap->lock, flags);
+
+	/* Remove scsi devices */
+	ata_for_each_link(link, ap, HOST_FIRST) {
+		ata_for_each_dev(dev, link, ALL) {
+			if (dev->sdev) {
+				spin_unlock_irqrestore(ap->lock, flags);
+				scsi_remove_device(dev->sdev);
+				spin_lock_irqsave(ap->lock, flags);
+				dev->sdev = NULL;
+			}
+		}
+	}
+
+	/* Tell EH to disable all devices */
 	ap->pflags |= ATA_PFLAG_UNLOADING;
 	ata_port_schedule_eh(ap);
+
 	spin_unlock_irqrestore(ap->lock, flags);
+	mutex_unlock(&ap->scsi_scan_mutex);
 
 	/* wait till EH commits suicide */
 	ata_port_wait_eh(ap);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 4cf4f57e57b8..5686353e442c 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -147,6 +147,8 @@ ata_eh_cmd_timeout_table[ATA_EH_CMD_TIMEOUT_TABLE_SIZE] = {
 	  .timeouts = ata_eh_other_timeouts, },
 	{ .commands = CMDS(ATA_CMD_FLUSH, ATA_CMD_FLUSH_EXT),
 	  .timeouts = ata_eh_flush_timeouts },
+	{ .commands = CMDS(ATA_CMD_VERIFY),
+	  .timeouts = ata_eh_reset_timeouts },
 };
 #undef CMDS
 
@@ -498,7 +500,19 @@ static void ata_eh_unload(struct ata_port *ap)
 	struct ata_device *dev;
 	unsigned long flags;
 
-	/* Restore SControl IPM and SPD for the next driver and
+	/*
+	 * Unless we are restarting, transition all enabled devices to
+	 * standby power mode.
+	 */
+	if (system_state != SYSTEM_RESTART) {
+		ata_for_each_link(link, ap, PMP_FIRST) {
+			ata_for_each_dev(dev, link, ENABLED)
+				ata_dev_power_set_standby(dev);
+		}
+	}
+
+	/*
+	 * Restore SControl IPM and SPD for the next driver and
 	 * disable attached devices.
 	 */
 	ata_for_each_link(link, ap, PMP_FIRST) {
@@ -684,6 +698,10 @@ void ata_scsi_port_error_handler(struct Scsi_Host *host, struct ata_port *ap)
 			ehc->saved_xfer_mode[devno] = dev->xfer_mode;
 			if (ata_ncq_enabled(dev))
 				ehc->saved_ncq_enabled |= 1 << devno;
+
+			/* If we are resuming, wake up the device */
+			if (ap->pflags & ATA_PFLAG_RESUMING)
+				ehc->i.dev_action[devno] |= ATA_EH_SET_ACTIVE;
 		}
 	}
 
@@ -743,6 +761,8 @@ void ata_scsi_port_error_handler(struct Scsi_Host *host, struct ata_port *ap)
 	/* clean up */
 	spin_lock_irqsave(ap->lock, flags);
 
+	ap->pflags &= ~ATA_PFLAG_RESUMING;
+
 	if (ap->pflags & ATA_PFLAG_LOADING)
 		ap->pflags &= ~ATA_PFLAG_LOADING;
 	else if ((ap->pflags & ATA_PFLAG_SCSI_HOTPLUG) &&
@@ -1218,6 +1238,13 @@ void ata_eh_detach_dev(struct ata_device *dev)
 	struct ata_eh_context *ehc = &link->eh_context;
 	unsigned long flags;
 
+	/*
+	 * If the device is still enabled, transition it to standby power mode
+	 * (i.e. spin down HDDs).
+	 */
+	if (ata_dev_enabled(dev))
+		ata_dev_power_set_standby(dev);
+
 	ata_dev_disable(dev);
 
 	spin_lock_irqsave(ap->lock, flags);
@@ -2305,7 +2332,7 @@ static void ata_eh_link_report(struct ata_link *link)
 	struct ata_eh_context *ehc = &link->eh_context;
 	struct ata_queued_cmd *qc;
 	const char *frozen, *desc;
-	char tries_buf[6] = "";
+	char tries_buf[16] = "";
 	int tag, nr_failed = 0;
 
 	if (ehc->i.flags & ATA_EHI_QUIET)
@@ -3016,6 +3043,15 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
 		if (ehc->i.flags & ATA_EHI_DID_RESET)
 			readid_flags |= ATA_READID_POSTRESET;
 
+		/*
+		 * When resuming, before executing any command, make sure to
+		 * transition the device to the active power mode.
+		 */
+		if ((action & ATA_EH_SET_ACTIVE) && ata_dev_enabled(dev)) {
+			ata_dev_power_set_active(dev);
+			ata_eh_done(link, dev, ATA_EH_SET_ACTIVE);
+		}
+
 		if ((action & ATA_EH_REVALIDATE) && ata_dev_enabled(dev)) {
 			WARN_ON(dev->class == ATA_DEV_PMP);
 
@@ -3989,6 +4025,7 @@ static void ata_eh_handle_port_suspend(struct ata_port *ap)
 	unsigned long flags;
 	int rc = 0;
 	struct ata_device *dev;
+	struct ata_link *link;
 
 	/* are we suspending? */
 	spin_lock_irqsave(ap->lock, flags);
@@ -4001,6 +4038,12 @@ static void ata_eh_handle_port_suspend(struct ata_port *ap)
 
 	WARN_ON(ap->pflags & ATA_PFLAG_SUSPENDED);
 
+	/* Set all devices attached to the port in standby mode */
+	ata_for_each_link(link, ap, HOST_FIRST) {
+		ata_for_each_dev(dev, link, ENABLED)
+			ata_dev_power_set_standby(dev);
+	}
+
 	/*
 	 * If we have a ZPODD attached, check its zero
 	 * power ready status before the port is frozen.
@@ -4083,6 +4126,7 @@ static void ata_eh_handle_port_resume(struct ata_port *ap)
 	/* update the flags */
 	spin_lock_irqsave(ap->lock, flags);
 	ap->pflags &= ~(ATA_PFLAG_PM_PENDING | ATA_PFLAG_SUSPENDED);
+	ap->pflags |= ATA_PFLAG_RESUMING;
 	spin_unlock_irqrestore(ap->lock, flags);
 }
 #endif /* CONFIG_PM */
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 0e96ed408c71..a371b497035e 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1050,14 +1050,13 @@ int ata_scsi_dev_config(struct scsi_device *sdev, struct ata_device *dev)
 		}
 	} else {
 		sdev->sector_size = ata_id_logical_sector_size(dev->id);
+
 		/*
-		 * Stop the drive on suspend but do not issue START STOP UNIT
-		 * on resume as this is not necessary and may fail: the device
-		 * will be woken up by ata_port_pm_resume() with a port reset
-		 * and device revalidation.
+		 * Ask the sd driver to issue START STOP UNIT on runtime suspend
+		 * and resume only. For system level suspend/resume, devices
+		 * power state is handled directly by libata EH.
 		 */
-		sdev->manage_start_stop = 1;
-		sdev->no_start_on_resume = 1;
+		sdev->manage_runtime_start_stop = true;
 	}
 
 	/*
@@ -1090,6 +1089,42 @@ int ata_scsi_dev_config(struct scsi_device *sdev, struct ata_device *dev)
 }
 
 /**
+ *	ata_scsi_slave_alloc - Early setup of SCSI device
+ *	@sdev: SCSI device to examine
+ *
+ *	This is called from scsi_alloc_sdev() when the scsi device
+ *	associated with an ATA device is scanned on a port.
+ *
+ *	LOCKING:
+ *	Defined by SCSI layer.  We don't really care.
+ */
+
+int ata_scsi_slave_alloc(struct scsi_device *sdev)
+{
+	struct ata_port *ap = ata_shost_to_port(sdev->host);
+	struct device_link *link;
+
+	ata_scsi_sdev_config(sdev);
+
+	/*
+	 * Create a link from the ata_port device to the scsi device to ensure
+	 * that PM does suspend/resume in the correct order: the scsi device is
+	 * consumer (child) and the ata port the supplier (parent).
+	 */
+	link = device_link_add(&sdev->sdev_gendev, &ap->tdev,
+			       DL_FLAG_STATELESS |
+			       DL_FLAG_PM_RUNTIME | DL_FLAG_RPM_ACTIVE);
+	if (!link) {
+		ata_port_err(ap, "Failed to create link to scsi device %s\n",
+			     dev_name(&sdev->sdev_gendev));
+		return -ENODEV;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ata_scsi_slave_alloc);
+
+/**
  *	ata_scsi_slave_config - Set SCSI device attributes
  *	@sdev: SCSI device to examine
  *
@@ -1105,14 +1140,11 @@ int ata_scsi_slave_config(struct scsi_device *sdev)
 {
 	struct ata_port *ap = ata_shost_to_port(sdev->host);
 	struct ata_device *dev = __ata_scsi_find_dev(ap, sdev);
-	int rc = 0;
-
-	ata_scsi_sdev_config(sdev);
 
 	if (dev)
-		rc = ata_scsi_dev_config(sdev, dev);
+		return ata_scsi_dev_config(sdev, dev);
 
-	return rc;
+	return 0;
 }
 EXPORT_SYMBOL_GPL(ata_scsi_slave_config);
 
@@ -1136,6 +1168,8 @@ void ata_scsi_slave_destroy(struct scsi_device *sdev)
 	unsigned long flags;
 	struct ata_device *dev;
 
+	device_link_remove(&sdev->sdev_gendev, &ap->tdev);
+
 	spin_lock_irqsave(ap->lock, flags);
 	dev = __ata_scsi_find_dev(ap, sdev);
 	if (dev && dev->sdev) {
@@ -1195,7 +1229,7 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc)
 	}
 
 	if (cdb[4] & 0x1) {
-		tf->nsect = 1;	/* 1 sector, lba=0 */
+		tf->nsect = 1;  /* 1 sector, lba=0 */
 
 		if (qc->dev->flags & ATA_DFLAG_LBA) {
 			tf->flags |= ATA_TFLAG_LBA;
@@ -1211,7 +1245,7 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc)
 			tf->lbah = 0x0; /* cyl high */
 		}
 
-		tf->command = ATA_CMD_VERIFY;	/* READ VERIFY */
+		tf->command = ATA_CMD_VERIFY;   /* READ VERIFY */
 	} else {
 		/* Some odd clown BIOSen issue spindown on power off (ACPI S4
 		 * or S5) causing some drives to spin up and down again.
@@ -1221,7 +1255,7 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc)
 			goto skip;
 
 		if ((qc->ap->flags & ATA_FLAG_NO_HIBERNATE_SPINDOWN) &&
-		     system_entering_hibernation())
+		    system_entering_hibernation())
 			goto skip;
 
 		/* Issue ATA STANDBY IMMEDIATE command */
@@ -4315,7 +4349,7 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd)
 		break;
 
 	case MAINTENANCE_IN:
-		if (scsicmd[1] == MI_REPORT_SUPPORTED_OPERATION_CODES)
+		if ((scsicmd[1] & 0x1f) == MI_REPORT_SUPPORTED_OPERATION_CODES)
 			ata_scsi_rbuf_fill(&args, ata_scsiop_maint_in);
 		else
 			ata_scsi_set_invalid_field(dev, cmd, 1, 0xff);
@@ -4725,7 +4759,7 @@ void ata_scsi_dev_rescan(struct work_struct *work)
 	struct ata_link *link;
 	struct ata_device *dev;
 	unsigned long flags;
-	bool delay_rescan = false;
+	int ret = 0;
 
 	mutex_lock(&ap->scsi_scan_mutex);
 	spin_lock_irqsave(ap->lock, flags);
@@ -4734,37 +4768,34 @@ void ata_scsi_dev_rescan(struct work_struct *work)
 		ata_for_each_dev(dev, link, ENABLED) {
 			struct scsi_device *sdev = dev->sdev;
 
+			/*
+			 * If the port was suspended before this was scheduled,
+			 * bail out.
+			 */
+			if (ap->pflags & ATA_PFLAG_SUSPENDED)
+				goto unlock;
+
 			if (!sdev)
 				continue;
 			if (scsi_device_get(sdev))
 				continue;
 
-			/*
-			 * If the rescan work was scheduled because of a resume
-			 * event, the port is already fully resumed, but the
-			 * SCSI device may not yet be fully resumed. In such
-			 * case, executing scsi_rescan_device() may cause a
-			 * deadlock with the PM code on device_lock(). Prevent
-			 * this by giving up and retrying rescan after a short
-			 * delay.
-			 */
-			delay_rescan = sdev->sdev_gendev.power.is_suspended;
-			if (delay_rescan) {
-				scsi_device_put(sdev);
-				break;
-			}
-
 			spin_unlock_irqrestore(ap->lock, flags);
-			scsi_rescan_device(sdev);
+			ret = scsi_rescan_device(sdev);
 			scsi_device_put(sdev);
 			spin_lock_irqsave(ap->lock, flags);
+
+			if (ret)
+				goto unlock;
 		}
 	}
 
+unlock:
 	spin_unlock_irqrestore(ap->lock, flags);
 	mutex_unlock(&ap->scsi_scan_mutex);
 
-	if (delay_rescan)
+	/* Reschedule with a delay if scsi_rescan_device() returned an error */
+	if (ret)
 		schedule_delayed_work(&ap->scsi_rescan_task,
 				      msecs_to_jiffies(5));
 }
diff --git a/drivers/ata/libata-transport.c b/drivers/ata/libata-transport.c
index e4fb9d1b9b39..3e49a877500e 100644
--- a/drivers/ata/libata-transport.c
+++ b/drivers/ata/libata-transport.c
@@ -266,6 +266,10 @@ void ata_tport_delete(struct ata_port *ap)
 	put_device(dev);
 }
 
+static const struct device_type ata_port_sas_type = {
+	.name = ATA_PORT_TYPE_NAME,
+};
+
 /** ata_tport_add - initialize a transport ATA port structure
  *
  * @parent:	parent device
@@ -283,7 +287,10 @@ int ata_tport_add(struct device *parent,
 	struct device *dev = &ap->tdev;
 
 	device_initialize(dev);
-	dev->type = &ata_port_type;
+	if (ap->flags & ATA_FLAG_SAS_HOST)
+		dev->type = &ata_port_sas_type;
+	else
+		dev->type = &ata_port_type;
 
 	dev->parent = parent;
 	ata_host_get(ap->host);
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 6e7d352803bd..05ac80da8ebc 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -30,6 +30,8 @@ enum {
 	ATA_DNXFER_QUIET	= (1 << 31),
 };
 
+#define ATA_PORT_TYPE_NAME	"ata_port"
+
 extern atomic_t ata_print_id;
 extern int atapi_passthru16;
 extern int libata_fua;
@@ -60,6 +62,8 @@ extern int ata_dev_reread_id(struct ata_device *dev, unsigned int readid_flags);
 extern int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class,
 			      unsigned int readid_flags);
 extern int ata_dev_configure(struct ata_device *dev);
+extern void ata_dev_power_set_standby(struct ata_device *dev);
+extern void ata_dev_power_set_active(struct ata_device *dev);
 extern int sata_down_spd_limit(struct ata_link *link, u32 spd_limit);
 extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel);
 extern unsigned int ata_dev_set_feature(struct ata_device *dev,
diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c
index 26db5b8dfc1e..749868b9e80d 100644
--- a/drivers/firewire/sbp2.c
+++ b/drivers/firewire/sbp2.c
@@ -81,7 +81,8 @@ MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device "
  *
  * - power condition
  *   Set the power condition field in the START STOP UNIT commands sent by
- *   sd_mod on suspend, resume, and shutdown (if manage_start_stop is on).
+ *   sd_mod on suspend, resume, and shutdown (if manage_system_start_stop or
+ *   manage_runtime_start_stop is on).
  *   Some disks need this to spin down or to resume properly.
  *
  * - override internal blacklist
@@ -1517,8 +1518,10 @@ static int sbp2_scsi_slave_configure(struct scsi_device *sdev)
 
 	sdev->use_10_for_rw = 1;
 
-	if (sbp2_param_exclusive_login)
-		sdev->manage_start_stop = 1;
+	if (sbp2_param_exclusive_login) {
+		sdev->manage_system_start_stop = true;
+		sdev->manage_runtime_start_stop = true;
+	}
 
 	if (sdev->type == TYPE_ROM)
 		sdev->use_10_for_ms = 1;
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index eaa972bee6c0..902655d75947 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -1619,12 +1619,24 @@ int scsi_add_device(struct Scsi_Host *host, uint channel,
 }
 EXPORT_SYMBOL(scsi_add_device);
 
-void scsi_rescan_device(struct scsi_device *sdev)
+int scsi_rescan_device(struct scsi_device *sdev)
 {
 	struct device *dev = &sdev->sdev_gendev;
+	int ret = 0;
 
 	device_lock(dev);
 
+	/*
+	 * Bail out if the device is not running. Otherwise, the rescan may
+	 * block waiting for commands to be executed, with us holding the
+	 * device lock. This can result in a potential deadlock in the power
+	 * management core code when system resume is on-going.
+	 */
+	if (sdev->sdev_state != SDEV_RUNNING) {
+		ret = -EWOULDBLOCK;
+		goto unlock;
+	}
+
 	scsi_attach_vpd(sdev);
 	scsi_cdl_check(sdev);
 
@@ -1638,7 +1650,11 @@ void scsi_rescan_device(struct scsi_device *sdev)
 			drv->rescan(dev);
 		module_put(dev->driver->owner);
 	}
+
+unlock:
 	device_unlock(dev);
+
+	return ret;
 }
 EXPORT_SYMBOL(scsi_rescan_device);
 
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index c92a317ba547..83b6a3f3863b 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -201,18 +201,32 @@ cache_type_store(struct device *dev, struct device_attribute *attr,
 }
 
 static ssize_t
-manage_start_stop_show(struct device *dev, struct device_attribute *attr,
-		       char *buf)
+manage_start_stop_show(struct device *dev,
+		       struct device_attribute *attr, char *buf)
 {
 	struct scsi_disk *sdkp = to_scsi_disk(dev);
 	struct scsi_device *sdp = sdkp->device;
 
-	return sprintf(buf, "%u\n", sdp->manage_start_stop);
+	return sysfs_emit(buf, "%u\n",
+			  sdp->manage_system_start_stop &&
+			  sdp->manage_runtime_start_stop);
 }
+static DEVICE_ATTR_RO(manage_start_stop);
 
 static ssize_t
-manage_start_stop_store(struct device *dev, struct device_attribute *attr,
-			const char *buf, size_t count)
+manage_system_start_stop_show(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct scsi_disk *sdkp = to_scsi_disk(dev);
+	struct scsi_device *sdp = sdkp->device;
+
+	return sysfs_emit(buf, "%u\n", sdp->manage_system_start_stop);
+}
+
+static ssize_t
+manage_system_start_stop_store(struct device *dev,
+			       struct device_attribute *attr,
+			       const char *buf, size_t count)
 {
 	struct scsi_disk *sdkp = to_scsi_disk(dev);
 	struct scsi_device *sdp = sdkp->device;
@@ -224,11 +238,42 @@ manage_start_stop_store(struct device *dev, struct device_attribute *attr,
 	if (kstrtobool(buf, &v))
 		return -EINVAL;
 
-	sdp->manage_start_stop = v;
+	sdp->manage_system_start_stop = v;
 
 	return count;
 }
-static DEVICE_ATTR_RW(manage_start_stop);
+static DEVICE_ATTR_RW(manage_system_start_stop);
+
+static ssize_t
+manage_runtime_start_stop_show(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	struct scsi_disk *sdkp = to_scsi_disk(dev);
+	struct scsi_device *sdp = sdkp->device;
+
+	return sysfs_emit(buf, "%u\n", sdp->manage_runtime_start_stop);
+}
+
+static ssize_t
+manage_runtime_start_stop_store(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	struct scsi_disk *sdkp = to_scsi_disk(dev);
+	struct scsi_device *sdp = sdkp->device;
+	bool v;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EACCES;
+
+	if (kstrtobool(buf, &v))
+		return -EINVAL;
+
+	sdp->manage_runtime_start_stop = v;
+
+	return count;
+}
+static DEVICE_ATTR_RW(manage_runtime_start_stop);
 
 static ssize_t
 allow_restart_show(struct device *dev, struct device_attribute *attr, char *buf)
@@ -560,6 +605,8 @@ static struct attribute *sd_disk_attrs[] = {
 	&dev_attr_FUA.attr,
 	&dev_attr_allow_restart.attr,
 	&dev_attr_manage_start_stop.attr,
+	&dev_attr_manage_system_start_stop.attr,
+	&dev_attr_manage_runtime_start_stop.attr,
 	&dev_attr_protection_type.attr,
 	&dev_attr_protection_mode.attr,
 	&dev_attr_app_tag_own.attr,
@@ -3694,7 +3741,8 @@ static int sd_remove(struct device *dev)
 
 	device_del(&sdkp->disk_dev);
 	del_gendisk(sdkp->disk);
-	sd_shutdown(dev);
+	if (!sdkp->suspended)
+		sd_shutdown(dev);
 
 	put_disk(sdkp->disk);
 	return 0;
@@ -3771,13 +3819,20 @@ static void sd_shutdown(struct device *dev)
 		sd_sync_cache(sdkp, NULL);
 	}
 
-	if (system_state != SYSTEM_RESTART && sdkp->device->manage_start_stop) {
+	if (system_state != SYSTEM_RESTART &&
+	    sdkp->device->manage_system_start_stop) {
 		sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
 		sd_start_stop_device(sdkp, 0);
 	}
 }
 
-static int sd_suspend_common(struct device *dev, bool ignore_stop_errors)
+static inline bool sd_do_start_stop(struct scsi_device *sdev, bool runtime)
+{
+	return (sdev->manage_system_start_stop && !runtime) ||
+		(sdev->manage_runtime_start_stop && runtime);
+}
+
+static int sd_suspend_common(struct device *dev, bool runtime)
 {
 	struct scsi_disk *sdkp = dev_get_drvdata(dev);
 	struct scsi_sense_hdr sshdr;
@@ -3809,15 +3864,18 @@ static int sd_suspend_common(struct device *dev, bool ignore_stop_errors)
 		}
 	}
 
-	if (sdkp->device->manage_start_stop) {
+	if (sd_do_start_stop(sdkp->device, runtime)) {
 		if (!sdkp->device->silence_suspend)
 			sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
 		/* an error is not worth aborting a system sleep */
 		ret = sd_start_stop_device(sdkp, 0);
-		if (ignore_stop_errors)
+		if (!runtime)
 			ret = 0;
 	}
 
+	if (!ret)
+		sdkp->suspended = true;
+
 	return ret;
 }
 
@@ -3826,15 +3884,15 @@ static int sd_suspend_system(struct device *dev)
 	if (pm_runtime_suspended(dev))
 		return 0;
 
-	return sd_suspend_common(dev, true);
+	return sd_suspend_common(dev, false);
 }
 
 static int sd_suspend_runtime(struct device *dev)
 {
-	return sd_suspend_common(dev, false);
+	return sd_suspend_common(dev, true);
 }
 
-static int sd_resume(struct device *dev)
+static int sd_resume(struct device *dev, bool runtime)
 {
 	struct scsi_disk *sdkp = dev_get_drvdata(dev);
 	int ret = 0;
@@ -3842,16 +3900,21 @@ static int sd_resume(struct device *dev)
 	if (!sdkp)	/* E.g.: runtime resume at the start of sd_probe() */
 		return 0;
 
-	if (!sdkp->device->manage_start_stop)
+	if (!sd_do_start_stop(sdkp->device, runtime)) {
+		sdkp->suspended = false;
 		return 0;
+	}
 
 	if (!sdkp->device->no_start_on_resume) {
 		sd_printk(KERN_NOTICE, sdkp, "Starting disk\n");
 		ret = sd_start_stop_device(sdkp, 1);
 	}
 
-	if (!ret)
+	if (!ret) {
 		opal_unlock_from_suspend(sdkp->opal_dev);
+		sdkp->suspended = false;
+	}
+
 	return ret;
 }
 
@@ -3860,7 +3923,7 @@ static int sd_resume_system(struct device *dev)
 	if (pm_runtime_suspended(dev))
 		return 0;
 
-	return sd_resume(dev);
+	return sd_resume(dev, false);
 }
 
 static int sd_resume_runtime(struct device *dev)
@@ -3887,7 +3950,7 @@ static int sd_resume_runtime(struct device *dev)
 				  "Failed to clear sense data\n");
 	}
 
-	return sd_resume(dev);
+	return sd_resume(dev, true);
 }
 
 static const struct dev_pm_ops sd_pm_ops = {
diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h
index 5eea762f84d1..409dda5350d1 100644
--- a/drivers/scsi/sd.h
+++ b/drivers/scsi/sd.h
@@ -131,6 +131,7 @@ struct scsi_disk {
 	u8		provisioning_mode;
 	u8		zeroing_mode;
 	u8		nr_actuators;		/* Number of actuators */
+	bool		suspended;	/* Disk is suspended (stopped) */
 	unsigned	ATO : 1;	/* state of disk ATO bit */
 	unsigned	cache_override : 1; /* temp override of WCE,RCD */
 	unsigned	WCE : 1;	/* state of disk WCE bit */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index bf4913f4d7ac..2a7d2af0ed80 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -192,6 +192,7 @@ enum {
 	ATA_PFLAG_UNLOADING	= (1 << 9), /* driver is being unloaded */
 	ATA_PFLAG_UNLOADED	= (1 << 10), /* driver is unloaded */
 
+	ATA_PFLAG_RESUMING	= (1 << 16),  /* port is being resumed */
 	ATA_PFLAG_SUSPENDED	= (1 << 17), /* port is suspended (power) */
 	ATA_PFLAG_PM_PENDING	= (1 << 18), /* PM operation pending */
 	ATA_PFLAG_INIT_GTM_VALID = (1 << 19), /* initial gtm data valid */
@@ -259,7 +260,7 @@ enum {
 	 * advised to wait only for the following duration before
 	 * doing SRST.
 	 */
-	ATA_TMOUT_PMP_SRST_WAIT	= 5000,
+	ATA_TMOUT_PMP_SRST_WAIT	= 10000,
 
 	/* When the LPM policy is set to ATA_LPM_MAX_POWER, there might
 	 * be a spurious PHY event, so ignore the first PHY event that
@@ -318,9 +319,10 @@ enum {
 	ATA_EH_ENABLE_LINK	= (1 << 3),
 	ATA_EH_PARK		= (1 << 5), /* unload heads and stop I/O */
 	ATA_EH_GET_SUCCESS_SENSE = (1 << 6), /* Get sense data for successful cmd */
+	ATA_EH_SET_ACTIVE	= (1 << 7), /* Set a device to active power mode */
 
 	ATA_EH_PERDEV_MASK	= ATA_EH_REVALIDATE | ATA_EH_PARK |
-				  ATA_EH_GET_SUCCESS_SENSE,
+				  ATA_EH_GET_SUCCESS_SENSE | ATA_EH_SET_ACTIVE,
 	ATA_EH_ALL_ACTIONS	= ATA_EH_REVALIDATE | ATA_EH_RESET |
 				  ATA_EH_ENABLE_LINK,
 
@@ -357,7 +359,7 @@ enum {
 	/* This should match the actual table size of
 	 * ata_eh_cmd_timeout_table in libata-eh.c.
 	 */
-	ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 7,
+	ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 8,
 
 	/* Horkage types. May be set by libata or controller on drives
 	   (some horkage may be drive/controller pair dependent */
@@ -1148,6 +1150,7 @@ extern int ata_std_bios_param(struct scsi_device *sdev,
 			      struct block_device *bdev,
 			      sector_t capacity, int geom[]);
 extern void ata_scsi_unlock_native_capacity(struct scsi_device *sdev);
+extern int ata_scsi_slave_alloc(struct scsi_device *sdev);
 extern int ata_scsi_slave_config(struct scsi_device *sdev);
 extern void ata_scsi_slave_destroy(struct scsi_device *sdev);
 extern int ata_scsi_change_queue_depth(struct scsi_device *sdev,
@@ -1396,6 +1399,7 @@ extern const struct attribute_group *ata_common_sdev_groups[];
 	.this_id		= ATA_SHT_THIS_ID,		\
 	.emulated		= ATA_SHT_EMULATED,		\
 	.proc_name		= drv_name,			\
+	.slave_alloc		= ata_scsi_slave_alloc,		\
 	.slave_destroy		= ata_scsi_slave_destroy,	\
 	.bios_param		= ata_std_bios_param,		\
 	.unlock_native_capacity	= ata_scsi_unlock_native_capacity,\
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index b9230b6add04..fd41fdac0a8e 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -161,6 +161,10 @@ struct scsi_device {
 				 * pass settings from slave_alloc to scsi
 				 * core. */
 	unsigned int eh_timeout; /* Error handling timeout */
+
+	bool manage_system_start_stop; /* Let HLD (sd) manage system start/stop */
+	bool manage_runtime_start_stop; /* Let HLD (sd) manage runtime start/stop */
+
 	unsigned removable:1;
 	unsigned changed:1;	/* Data invalid due to media change */
 	unsigned busy:1;	/* Used to prevent races */
@@ -193,7 +197,6 @@ struct scsi_device {
 	unsigned use_192_bytes_for_3f:1; /* ask for 192 bytes from page 0x3f */
 	unsigned no_start_on_add:1;	/* do not issue start on add */
 	unsigned allow_restart:1; /* issue START_UNIT in error handler */
-	unsigned manage_start_stop:1;	/* Let HLD (sd) manage start/stop */
 	unsigned no_start_on_resume:1; /* Do not issue START_STOP_UNIT on resume */
 	unsigned start_stop_pwr_cond:1;	/* Set power cond. in START_STOP_UNIT */
 	unsigned no_uld_attach:1; /* disable connecting to upper level drivers */
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index 49f768d0ff37..4c2dc8150c6d 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -764,7 +764,7 @@ scsi_template_proc_dir(const struct scsi_host_template *sht);
 #define scsi_template_proc_dir(sht) NULL
 #endif
 extern void scsi_scan_host(struct Scsi_Host *);
-extern void scsi_rescan_device(struct scsi_device *);
+extern int scsi_rescan_device(struct scsi_device *sdev);
 extern void scsi_remove_host(struct Scsi_Host *);
 extern struct Scsi_Host *scsi_host_get(struct Scsi_Host *);
 extern int scsi_host_busy(struct Scsi_Host *shost);