diff options
61 files changed, 188 insertions, 188 deletions
diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h index 35006d193d51..64472e4ec329 100644 --- a/drivers/acpi/acpica/acglobal.h +++ b/drivers/acpi/acpica/acglobal.h @@ -70,7 +70,7 @@ /* * Enable "slack" in the AML interpreter? Default is FALSE, and the - * interpreter strictly follows the ACPI specification. Setting to TRUE + * interpreter strictly follows the ACPI specification. Setting to TRUE * allows the interpreter to ignore certain errors and/or bad AML constructs. * * Currently, these features are enabled by this flag: diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h index 5b5be40a1997..ff8bd0061e8b 100644 --- a/drivers/acpi/acpica/aclocal.h +++ b/drivers/acpi/acpica/aclocal.h @@ -265,7 +265,7 @@ typedef acpi_status(*acpi_internal_method) (struct acpi_walk_state * walk_state); /* - * Bitmapped ACPI types. Used internally only + * Bitmapped ACPI types. Used internally only */ #define ACPI_BTYPE_ANY 0x00000000 #define ACPI_BTYPE_INTEGER 0x00000001 @@ -584,7 +584,7 @@ struct acpi_pscope_state { }; /* - * Thread state - one per thread across multiple walk states. Multiple walk + * Thread state - one per thread across multiple walk states. Multiple walk * states are created when there are nested control methods executing. */ struct acpi_thread_state { diff --git a/drivers/acpi/acpica/acobject.h b/drivers/acpi/acpica/acobject.h index b83e46aebb17..24eb9eac9514 100644 --- a/drivers/acpi/acpica/acobject.h +++ b/drivers/acpi/acpica/acobject.h @@ -197,7 +197,7 @@ struct acpi_object_method { /****************************************************************************** * - * Objects that can be notified. All share a common notify_info area. + * Objects that can be notified. All share a common notify_info area. * *****************************************************************************/ @@ -234,7 +234,7 @@ ACPI_OBJECT_COMMON_HEADER ACPI_COMMON_NOTIFY_INFO}; /****************************************************************************** * - * Fields. All share a common header/info field. + * Fields. All share a common header/info field. * *****************************************************************************/ diff --git a/drivers/acpi/acpica/acopcode.h b/drivers/acpi/acpica/acopcode.h index 9440d053fbb3..d786a5128b78 100644 --- a/drivers/acpi/acpica/acopcode.h +++ b/drivers/acpi/acpica/acopcode.h @@ -54,7 +54,7 @@ #define _UNK 0x6B /* - * Reserved ASCII characters. Do not use any of these for + * Reserved ASCII characters. Do not use any of these for * internal opcodes, since they are used to differentiate * name strings from AML opcodes */ @@ -63,7 +63,7 @@ #define _PFX 0x6D /* - * All AML opcodes and the parse-time arguments for each. Used by the AML + * All AML opcodes and the parse-time arguments for each. Used by the AML * parser Each list is compressed into a 32-bit number and stored in the * master opcode table (in psopcode.c). */ @@ -193,7 +193,7 @@ #define ARGP_ZERO_OP ARG_NONE /* - * All AML opcodes and the runtime arguments for each. Used by the AML + * All AML opcodes and the runtime arguments for each. Used by the AML * interpreter Each list is compressed into a 32-bit number and stored * in the master opcode table (in psopcode.c). * diff --git a/drivers/acpi/acpica/acstruct.h b/drivers/acpi/acpica/acstruct.h index f196e2c9a71f..937e66c65d1e 100644 --- a/drivers/acpi/acpica/acstruct.h +++ b/drivers/acpi/acpica/acstruct.h @@ -53,7 +53,7 @@ ****************************************************************************/ /* - * Walk state - current state of a parse tree walk. Used for both a leisurely + * Walk state - current state of a parse tree walk. Used for both a leisurely * stroll through the tree (for whatever reason), and for control method * execution. */ diff --git a/drivers/acpi/acpica/dscontrol.c b/drivers/acpi/acpica/dscontrol.c index 465f02134b89..57895db3231a 100644 --- a/drivers/acpi/acpica/dscontrol.c +++ b/drivers/acpi/acpica/dscontrol.c @@ -280,7 +280,7 @@ acpi_ds_exec_end_control_op(struct acpi_walk_state * walk_state, /* * Get the return value and save as the last result - * value. This is the only place where walk_state->return_desc + * value. This is the only place where walk_state->return_desc * is set to anything other than zero! */ walk_state->return_desc = walk_state->operands[0]; diff --git a/drivers/acpi/acpica/dsfield.c b/drivers/acpi/acpica/dsfield.c index 3da6fd8530c5..b5b904ee815f 100644 --- a/drivers/acpi/acpica/dsfield.c +++ b/drivers/acpi/acpica/dsfield.c @@ -277,7 +277,7 @@ acpi_ds_create_buffer_field(union acpi_parse_object *op, * * RETURN: Status * - * DESCRIPTION: Process all named fields in a field declaration. Names are + * DESCRIPTION: Process all named fields in a field declaration. Names are * entered into the namespace. * ******************************************************************************/ diff --git a/drivers/acpi/acpica/dsmethod.c b/drivers/acpi/acpica/dsmethod.c index aa9a5d4e4052..52eb4e01622a 100644 --- a/drivers/acpi/acpica/dsmethod.c +++ b/drivers/acpi/acpica/dsmethod.c @@ -170,7 +170,7 @@ acpi_ds_create_method_mutex(union acpi_operand_object *method_desc) * * RETURN: Status * - * DESCRIPTION: Prepare a method for execution. Parses the method if necessary, + * DESCRIPTION: Prepare a method for execution. Parses the method if necessary, * increments the thread count, and waits at the method semaphore * for clearance to execute. * @@ -444,7 +444,7 @@ acpi_ds_call_control_method(struct acpi_thread_state *thread, * RETURN: Status * * DESCRIPTION: Restart a method that was preempted by another (nested) method - * invocation. Handle the return value (if any) from the callee. + * invocation. Handle the return value (if any) from the callee. * ******************************************************************************/ @@ -530,7 +530,7 @@ acpi_ds_restart_control_method(struct acpi_walk_state *walk_state, * * RETURN: None * - * DESCRIPTION: Terminate a control method. Delete everything that the method + * DESCRIPTION: Terminate a control method. Delete everything that the method * created, delete all locals and arguments, and delete the parse * tree if requested. * diff --git a/drivers/acpi/acpica/dsmthdat.c b/drivers/acpi/acpica/dsmthdat.c index 8d55cebaa656..9a83b7e0f3ba 100644 --- a/drivers/acpi/acpica/dsmthdat.c +++ b/drivers/acpi/acpica/dsmthdat.c @@ -76,7 +76,7 @@ acpi_ds_method_data_get_type(u16 opcode, * RETURN: Status * * DESCRIPTION: Initialize the data structures that hold the method's arguments - * and locals. The data struct is an array of namespace nodes for + * and locals. The data struct is an array of namespace nodes for * each - this allows ref_of and de_ref_of to work properly for these * special data types. * @@ -129,7 +129,7 @@ void acpi_ds_method_data_init(struct acpi_walk_state *walk_state) * * RETURN: None * - * DESCRIPTION: Delete method locals and arguments. Arguments are only + * DESCRIPTION: Delete method locals and arguments. Arguments are only * deleted if this method was called from another method. * ******************************************************************************/ @@ -183,7 +183,7 @@ void acpi_ds_method_data_delete_all(struct acpi_walk_state *walk_state) * * RETURN: Status * - * DESCRIPTION: Initialize arguments for a method. The parameter list is a list + * DESCRIPTION: Initialize arguments for a method. The parameter list is a list * of ACPI operand objects, either null terminated or whose length * is defined by max_param_count. * @@ -401,7 +401,7 @@ acpi_ds_method_data_get_value(u8 type, * This means that either 1) The expected argument was * not passed to the method, or 2) A local variable * was referenced by the method (via the ASL) - * before it was initialized. Either case is an error. + * before it was initialized. Either case is an error. */ /* If slack enabled, init the local_x/arg_x to an Integer of value zero */ @@ -465,7 +465,7 @@ acpi_ds_method_data_get_value(u8 type, * * RETURN: None * - * DESCRIPTION: Delete the entry at Opcode:Index. Inserts + * DESCRIPTION: Delete the entry at Opcode:Index. Inserts * a null into the stack slot after the object is deleted. * ******************************************************************************/ @@ -523,7 +523,7 @@ acpi_ds_method_data_delete_value(u8 type, * * RETURN: Status * - * DESCRIPTION: Store a value in an Arg or Local. The obj_desc is installed + * DESCRIPTION: Store a value in an Arg or Local. The obj_desc is installed * as the new value for the Arg or Local and the reference count * for obj_desc is incremented. * @@ -566,7 +566,7 @@ acpi_ds_store_object_to_local(u8 type, /* * If the reference count on the object is more than one, we must - * take a copy of the object before we store. A reference count + * take a copy of the object before we store. A reference count * of exactly 1 means that the object was just created during the * evaluation of an expression, and we can safely use it since it * is not used anywhere else. diff --git a/drivers/acpi/acpica/dsobject.c b/drivers/acpi/acpica/dsobject.c index 68592dd34960..c9f15d3a3686 100644 --- a/drivers/acpi/acpica/dsobject.c +++ b/drivers/acpi/acpica/dsobject.c @@ -293,7 +293,7 @@ acpi_ds_build_internal_buffer_obj(struct acpi_walk_state *walk_state, /* * Second arg is the buffer data (optional) byte_list can be either - * individual bytes or a string initializer. In either case, a + * individual bytes or a string initializer. In either case, a * byte_list appears in the AML. */ arg = op->common.value.arg; /* skip first arg */ @@ -568,7 +568,7 @@ acpi_ds_create_node(struct acpi_walk_state *walk_state, /* * Because of the execution pass through the non-control-method - * parts of the table, we can arrive here twice. Only init + * parts of the table, we can arrive here twice. Only init * the named object node the first time through */ if (acpi_ns_get_attached_object(node)) { @@ -618,7 +618,7 @@ acpi_ds_create_node(struct acpi_walk_state *walk_state, * RETURN: Status * * DESCRIPTION: Initialize a namespace object from a parser Op and its - * associated arguments. The namespace object is a more compact + * associated arguments. The namespace object is a more compact * representation of the Op and its arguments. * ******************************************************************************/ diff --git a/drivers/acpi/acpica/dsutils.c b/drivers/acpi/acpica/dsutils.c index 4bbdd6c7a3d0..afeb99f49482 100644 --- a/drivers/acpi/acpica/dsutils.c +++ b/drivers/acpi/acpica/dsutils.c @@ -61,7 +61,7 @@ ACPI_MODULE_NAME("dsutils") * * RETURN: None. * - * DESCRIPTION: Clear and remove a reference on an implicit return value. Used + * DESCRIPTION: Clear and remove a reference on an implicit return value. Used * to delete "stale" return values (if enabled, the return value * from every operator is saved at least momentarily, in case the * parent method exits.) @@ -107,7 +107,7 @@ void acpi_ds_clear_implicit_return(struct acpi_walk_state *walk_state) * * DESCRIPTION: Implements the optional "implicit return". We save the result * of every ASL operator and control method invocation in case the - * parent method exit. Before storing a new return value, we + * parent method exit. Before storing a new return value, we * delete the previous return value. * ******************************************************************************/ @@ -198,7 +198,7 @@ acpi_ds_is_result_used(union acpi_parse_object * op, * * If there is no parent, or the parent is a scope_op, we are executing * at the method level. An executing method typically has no parent, - * since each method is parsed separately. A method invoked externally + * since each method is parsed separately. A method invoked externally * via execute_control_method has a scope_op as the parent. */ if ((!op->common.parent) || @@ -223,7 +223,7 @@ acpi_ds_is_result_used(union acpi_parse_object * op, } /* - * Decide what to do with the result based on the parent. If + * Decide what to do with the result based on the parent. If * the parent opcode will not use the result, delete the object. * Otherwise leave it as is, it will be deleted when it is used * as an operand later. @@ -266,7 +266,7 @@ acpi_ds_is_result_used(union acpi_parse_object * op, /* * These opcodes allow term_arg(s) as operands and therefore - * the operands can be method calls. The result is used. + * the operands can be method calls. The result is used. */ goto result_used; @@ -284,7 +284,7 @@ acpi_ds_is_result_used(union acpi_parse_object * op, AML_BANK_FIELD_OP)) { /* * These opcodes allow term_arg(s) as operands and therefore - * the operands can be method calls. The result is used. + * the operands can be method calls. The result is used. */ goto result_used; } @@ -329,9 +329,9 @@ acpi_ds_is_result_used(union acpi_parse_object * op, * * RETURN: Status * - * DESCRIPTION: Used after interpretation of an opcode. If there is an internal + * DESCRIPTION: Used after interpretation of an opcode. If there is an internal * result descriptor, check if the parent opcode will actually use - * this result. If not, delete the result now so that it will + * this result. If not, delete the result now so that it will * not become orphaned. * ******************************************************************************/ @@ -376,7 +376,7 @@ acpi_ds_delete_result_if_not_used(union acpi_parse_object *op, * * RETURN: Status * - * DESCRIPTION: Resolve all operands to their values. Used to prepare + * DESCRIPTION: Resolve all operands to their values. Used to prepare * arguments to a control method invocation (a call from one * method to another.) * @@ -391,7 +391,7 @@ acpi_status acpi_ds_resolve_operands(struct acpi_walk_state *walk_state) /* * Attempt to resolve each of the valid operands - * Method arguments are passed by reference, not by value. This means + * Method arguments are passed by reference, not by value. This means * that the actual objects are passed, not copies of the objects. */ for (i = 0; i < walk_state->num_operands; i++) { @@ -451,7 +451,7 @@ void acpi_ds_clear_operands(struct acpi_walk_state *walk_state) * RETURN: Status * * DESCRIPTION: Translate a parse tree object that is an argument to an AML - * opcode to the equivalent interpreter object. This may include + * opcode to the equivalent interpreter object. This may include * looking up a name or entering a new name into the internal * namespace. * @@ -496,9 +496,9 @@ acpi_ds_create_operand(struct acpi_walk_state *walk_state, /* * Special handling for buffer_field declarations. This is a deferred * opcode that unfortunately defines the field name as the last - * parameter instead of the first. We get here when we are performing + * parameter instead of the first. We get here when we are performing * the deferred execution, so the actual name of the field is already - * in the namespace. We don't want to attempt to look it up again + * in the namespace. We don't want to attempt to look it up again * because we may be executing in a different scope than where the * actual opcode exists. */ @@ -605,8 +605,8 @@ acpi_ds_create_operand(struct acpi_walk_state *walk_state, /* * If the name is null, this means that this is an * optional result parameter that was not specified - * in the original ASL. Create a Zero Constant for a - * placeholder. (Store to a constant is a Noop.) + * in the original ASL. Create a Zero Constant for a + * placeholder. (Store to a constant is a Noop.) */ opcode = AML_ZERO_OP; /* Has no arguments! */ diff --git a/drivers/acpi/acpica/dswexec.c b/drivers/acpi/acpica/dswexec.c index fa44609aba33..58593931be96 100644 --- a/drivers/acpi/acpica/dswexec.c +++ b/drivers/acpi/acpica/dswexec.c @@ -204,7 +204,7 @@ acpi_ds_get_predicate_value(struct acpi_walk_state *walk_state, * RETURN: Status * * DESCRIPTION: Descending callback used during the execution of control - * methods. This is where most operators and operands are + * methods. This is where most operators and operands are * dispatched to the interpreter. * ****************************************************************************/ @@ -297,7 +297,7 @@ acpi_ds_exec_begin_op(struct acpi_walk_state *walk_state, if (walk_state->walk_type & ACPI_WALK_METHOD) { /* * Found a named object declaration during method execution; - * we must enter this object into the namespace. The created + * we must enter this object into the namespace. The created * object is temporary and will be deleted upon completion of * the execution of this method. * @@ -348,7 +348,7 @@ acpi_ds_exec_begin_op(struct acpi_walk_state *walk_state, * RETURN: Status * * DESCRIPTION: Ascending callback used during the execution of control - * methods. The only thing we really need to do here is to + * methods. The only thing we really need to do here is to * notice the beginning of IF, ELSE, and WHILE blocks. * ****************************************************************************/ @@ -432,7 +432,7 @@ acpi_status acpi_ds_exec_end_op(struct acpi_walk_state *walk_state) if (ACPI_SUCCESS(status)) { /* * Dispatch the request to the appropriate interpreter handler - * routine. There is one routine per opcode "type" based upon the + * routine. There is one routine per opcode "type" based upon the * number of opcode arguments and return type. */ status = diff --git a/drivers/acpi/acpica/dswstate.c b/drivers/acpi/acpica/dswstate.c index 8e6267980aaf..3e65a15a735f 100644 --- a/drivers/acpi/acpica/dswstate.c +++ b/drivers/acpi/acpica/dswstate.c @@ -348,7 +348,7 @@ acpi_ds_obj_stack_push(void *object, struct acpi_walk_state * walk_state) * * RETURN: Status * - * DESCRIPTION: Pop this walk's object stack. Objects on the stack are NOT + * DESCRIPTION: Pop this walk's object stack. Objects on the stack are NOT * deleted by this routine. * ******************************************************************************/ @@ -492,7 +492,7 @@ acpi_ds_push_walk_state(struct acpi_walk_state *walk_state, * RETURN: A walk_state object popped from the thread's stack * * DESCRIPTION: Remove and return the walkstate object that is at the head of - * the walk stack for the given walk list. NULL indicates that + * the walk stack for the given walk list. NULL indicates that * the list is empty. * ******************************************************************************/ @@ -532,7 +532,7 @@ struct acpi_walk_state *acpi_ds_pop_walk_state(struct acpi_thread_state *thread) * * RETURN: Pointer to the new walk state. * - * DESCRIPTION: Allocate and initialize a new walk state. The current walk + * DESCRIPTION: Allocate and initialize a new walk state. The current walk * state is set to this new state. * ******************************************************************************/ @@ -657,7 +657,7 @@ acpi_ds_init_aml_walk(struct acpi_walk_state *walk_state, /* * Setup the current scope. * Find a Named Op that has a namespace node associated with it. - * search upwards from this Op. Current scope is the first + * search upwards from this Op. Current scope is the first * Op with a namespace node. */ extra_op = parser_state->start_op; diff --git a/drivers/acpi/acpica/excreate.c b/drivers/acpi/acpica/excreate.c index 9f152701bc0f..66554bc6f9a8 100644 --- a/drivers/acpi/acpica/excreate.c +++ b/drivers/acpi/acpica/excreate.c @@ -78,7 +78,7 @@ acpi_status acpi_ex_create_alias(struct acpi_walk_state *walk_state) (target_node->type == ACPI_TYPE_LOCAL_METHOD_ALIAS)) { /* * Dereference an existing alias so that we don't create a chain - * of aliases. With this code, we guarantee that an alias is + * of aliases. With this code, we guarantee that an alias is * always exactly one level of indirection away from the * actual aliased name. */ @@ -90,7 +90,7 @@ acpi_status acpi_ex_create_alias(struct acpi_walk_state *walk_state) /* * For objects that can never change (i.e., the NS node will * permanently point to the same object), we can simply attach - * the object to the new NS node. For other objects (such as + * the object to the new NS node. For other objects (such as * Integers, buffers, etc.), we have to point the Alias node * to the original Node. */ @@ -139,7 +139,7 @@ acpi_status acpi_ex_create_alias(struct acpi_walk_state *walk_state) /* * The new alias assumes the type of the target, and it points - * to the same object. The reference count of the object has an + * to the same object. The reference count of the object has an * additional reference to prevent deletion out from under either the * target node or the alias Node */ diff --git a/drivers/acpi/acpica/exdump.c b/drivers/acpi/acpica/exdump.c index 40608b3e28f7..3157f3bb8de7 100644 --- a/drivers/acpi/acpica/exdump.c +++ b/drivers/acpi/acpica/exdump.c @@ -778,7 +778,7 @@ acpi_ex_dump_operands(union acpi_operand_object **operands, * PARAMETERS: title - Descriptive text * value - Value to be displayed * - * DESCRIPTION: Object dump output formatting functions. These functions + * DESCRIPTION: Object dump output formatting functions. These functions * reduce the number of format strings required and keeps them * all in one place for easy modification. * diff --git a/drivers/acpi/acpica/exfield.c b/drivers/acpi/acpica/exfield.c index dc092f5b35d6..ebc55fbf3ff7 100644 --- a/drivers/acpi/acpica/exfield.c +++ b/drivers/acpi/acpica/exfield.c @@ -59,7 +59,7 @@ ACPI_MODULE_NAME("exfield") * * RETURN: Status * - * DESCRIPTION: Read from a named field. Returns either an Integer or a + * DESCRIPTION: Read from a named field. Returns either an Integer or a * Buffer, depending on the size of the field. * ******************************************************************************/ @@ -149,7 +149,7 @@ acpi_ex_read_data_from_field(struct acpi_walk_state *walk_state, * Allocate a buffer for the contents of the field. * * If the field is larger than the current integer width, create - * a BUFFER to hold it. Otherwise, use an INTEGER. This allows + * a BUFFER to hold it. Otherwise, use an INTEGER. This allows * the use of arithmetic operators on the returned value if the * field size is equal or smaller than an Integer. * diff --git a/drivers/acpi/acpica/exfldio.c b/drivers/acpi/acpica/exfldio.c index 419148a66e71..aa2ccfb7cb61 100644 --- a/drivers/acpi/acpica/exfldio.c +++ b/drivers/acpi/acpica/exfldio.c @@ -154,7 +154,7 @@ acpi_ex_setup_region(union acpi_operand_object *obj_desc, #endif /* - * Validate the request. The entire request from the byte offset for a + * Validate the request. The entire request from the byte offset for a * length of one field datum (access width) must fit within the region. * (Region length is specified in bytes) */ @@ -182,7 +182,7 @@ acpi_ex_setup_region(union acpi_operand_object *obj_desc, obj_desc->common_field.access_byte_width) { /* * This is the case where the access_type (acc_word, etc.) is wider - * than the region itself. For example, a region of length one + * than the region itself. For example, a region of length one * byte, and a field with Dword access specified. */ ACPI_ERROR((AE_INFO, @@ -320,7 +320,7 @@ acpi_ex_access_region(union acpi_operand_object *obj_desc, * * DESCRIPTION: Check if a value is out of range of the field being written. * Used to check if the values written to Index and Bank registers - * are out of range. Normally, the value is simply truncated + * are out of range. Normally, the value is simply truncated * to fit the field, but this case is most likely a serious * coding error in the ASL. * @@ -369,7 +369,7 @@ acpi_ex_register_overflow(union acpi_operand_object *obj_desc, u64 value) * * RETURN: Status * - * DESCRIPTION: Read or Write a single datum of a field. The field_type is + * DESCRIPTION: Read or Write a single datum of a field. The field_type is * demultiplexed here to handle the different types of fields * (buffer_field, region_field, index_field, bank_field) * @@ -859,7 +859,7 @@ acpi_ex_insert_into_field(union acpi_operand_object *obj_desc, ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->common_field.bit_length); /* * We must have a buffer that is at least as long as the field - * we are writing to. This is because individual fields are + * we are writing to. This is because individual fields are * indivisible and partial writes are not supported -- as per * the ACPI specification. */ @@ -874,7 +874,7 @@ acpi_ex_insert_into_field(union acpi_operand_object *obj_desc, /* * Copy the original data to the new buffer, starting - * at Byte zero. All unused (upper) bytes of the + * at Byte zero. All unused (upper) bytes of the * buffer will be 0. */ ACPI_MEMCPY((char *)new_buffer, (char *)buffer, buffer_length); diff --git a/drivers/acpi/acpica/exmisc.c b/drivers/acpi/acpica/exmisc.c index 15e1abd19136..84058705ed12 100644 --- a/drivers/acpi/acpica/exmisc.c +++ b/drivers/acpi/acpica/exmisc.c @@ -253,7 +253,7 @@ acpi_ex_do_concatenate(union acpi_operand_object *operand0, ACPI_FUNCTION_TRACE(ex_do_concatenate); /* - * Convert the second operand if necessary. The first operand + * Convert the second operand if necessary. The first operand * determines the type of the second operand, (See the Data Types * section of the ACPI specification.) Both object types are * guaranteed to be either Integer/String/Buffer by the operand @@ -572,7 +572,7 @@ acpi_ex_do_logical_op(u16 opcode, ACPI_FUNCTION_TRACE(ex_do_logical_op); /* - * Convert the second operand if necessary. The first operand + * Convert the second operand if necessary. The first operand * determines the type of the second operand, (See the Data Types * section of the ACPI 3.0+ specification.) Both object types are * guaranteed to be either Integer/String/Buffer by the operand diff --git a/drivers/acpi/acpica/exnames.c b/drivers/acpi/acpica/exnames.c index a41c82fe2d3d..2ff578a16adc 100644 --- a/drivers/acpi/acpica/exnames.c +++ b/drivers/acpi/acpica/exnames.c @@ -62,7 +62,7 @@ static acpi_status acpi_ex_name_segment(u8 **in_aml_address, char *name_string); * (-1)==root, 0==none * num_name_segs - count of 4-character name segments * - * RETURN: A pointer to the allocated string segment. This segment must + * RETURN: A pointer to the allocated string segment. This segment must * be deleted by the caller. * * DESCRIPTION: Allocate a buffer for a name string. Ensure allocated name diff --git a/drivers/acpi/acpica/exoparg1.c b/drivers/acpi/acpica/exoparg1.c index c6490d609194..bbf01e9bf057 100644 --- a/drivers/acpi/acpica/exoparg1.c +++ b/drivers/acpi/acpica/exoparg1.c @@ -605,7 +605,7 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state) } /* - * Set result to ONES (TRUE) if Value == 0. Note: + * Set result to ONES (TRUE) if Value == 0. Note: * return_desc->Integer.Value is initially == 0 (FALSE) from above. */ if (!operand[0]->integer.value) { @@ -617,7 +617,7 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state) case AML_INCREMENT_OP: /* Increment (Operand) */ /* - * Create a new integer. Can't just get the base integer and + * Create a new integer. Can't just get the base integer and * increment it because it may be an Arg or Field. */ return_desc = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER); @@ -685,7 +685,7 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state) /* * Note: The operand is not resolved at this point because we want to - * get the associated object, not its value. For example, we don't + * get the associated object, not its value. For example, we don't * want to resolve a field_unit to its value, we want the actual * field_unit object. */ @@ -726,7 +726,7 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state) /* * The type of the base object must be integer, buffer, string, or - * package. All others are not supported. + * package. All others are not supported. * * NOTE: Integer is not specifically supported by the ACPI spec, * but is supported implicitly via implicit operand conversion. @@ -964,7 +964,7 @@ acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state) case ACPI_TYPE_PACKAGE: /* - * Return the referenced element of the package. We must + * Return the referenced element of the package. We must * add another reference to the referenced object, however. */ return_desc = diff --git a/drivers/acpi/acpica/exoparg2.c b/drivers/acpi/acpica/exoparg2.c index 879e8a277b94..ee5634a074c4 100644 --- a/drivers/acpi/acpica/exoparg2.c +++ b/drivers/acpi/acpica/exoparg2.c @@ -123,7 +123,7 @@ acpi_status acpi_ex_opcode_2A_0T_0R(struct acpi_walk_state *walk_state) /* * Dispatch the notify to the appropriate handler * NOTE: the request is queued for execution after this method - * completes. The notify handlers are NOT invoked synchronously + * completes. The notify handlers are NOT invoked synchronously * from this thread -- because handlers may in turn run other * control methods. */ diff --git a/drivers/acpi/acpica/exoparg3.c b/drivers/acpi/acpica/exoparg3.c index 00b19bfe5b5d..2c89b4651f08 100644 --- a/drivers/acpi/acpica/exoparg3.c +++ b/drivers/acpi/acpica/exoparg3.c @@ -157,7 +157,7 @@ acpi_status acpi_ex_opcode_3A_1T_1R(struct acpi_walk_state *walk_state) case AML_MID_OP: /* Mid (Source[0], Index[1], Length[2], Result[3]) */ /* - * Create the return object. The Source operand is guaranteed to be + * Create the return object. The Source operand is guaranteed to be * either a String or a Buffer, so just use its type. */ return_desc = acpi_ut_create_internal_object((operand[0])-> diff --git a/drivers/acpi/acpica/exoparg6.c b/drivers/acpi/acpica/exoparg6.c index 98188555e781..3e08695c3b30 100644 --- a/drivers/acpi/acpica/exoparg6.c +++ b/drivers/acpi/acpica/exoparg6.c @@ -268,7 +268,7 @@ acpi_status acpi_ex_opcode_6A_0T_1R(struct acpi_walk_state * walk_state) * and the next should be examined. * * Upon finding a match, the loop will terminate via "break" at - * the bottom. If it terminates "normally", match_value will be + * the bottom. If it terminates "normally", match_value will be * ACPI_UINT64_MAX (Ones) (its initial value) indicating that no * match was found. */ diff --git a/drivers/acpi/acpica/exprep.c b/drivers/acpi/acpica/exprep.c index 958924808766..ba9db4de7c89 100644 --- a/drivers/acpi/acpica/exprep.c +++ b/drivers/acpi/acpica/exprep.c @@ -77,8 +77,8 @@ acpi_ex_generate_access(u32 field_bit_offset, * any_acc keyword. * * NOTE: Need to have the region_length in order to check for boundary - * conditions (end-of-region). However, the region_length is a deferred - * operation. Therefore, to complete this implementation, the generation + * conditions (end-of-region). However, the region_length is a deferred + * operation. Therefore, to complete this implementation, the generation * of this access width must be deferred until the region length has * been evaluated. * @@ -307,7 +307,7 @@ acpi_ex_decode_field_access(union acpi_operand_object *obj_desc, * RETURN: Status * * DESCRIPTION: Initialize the areas of the field object that are common - * to the various types of fields. Note: This is very "sensitive" + * to the various types of fields. Note: This is very "sensitive" * code because we are solving the general case for field * alignment. * @@ -335,13 +335,13 @@ acpi_ex_prep_common_field_object(union acpi_operand_object *obj_desc, obj_desc->common_field.bit_length = field_bit_length; /* - * Decode the access type so we can compute offsets. The access type gives + * Decode the access type so we can compute offsets. The access type gives * two pieces of information - the width of each field access and the * necessary byte_alignment (address granularity) of the access. * * For any_acc, the access_bit_width is the largest width that is both * necessary and possible in an attempt to access the whole field in one - * I/O operation. However, for any_acc, the byte_alignment is always one + * I/O operation. However, for any_acc, the byte_alignment is always one * byte. * * For all Buffer Fields, the byte_alignment is always one byte. @@ -362,7 +362,7 @@ acpi_ex_prep_common_field_object(union acpi_operand_object *obj_desc, /* * base_byte_offset is the address of the start of the field within the - * region. It is the byte address of the first *datum* (field-width data + * region. It is the byte address of the first *datum* (field-width data * unit) of the field. (i.e., the first datum that contains at least the * first *bit* of the field.) * diff --git a/drivers/acpi/acpica/exregion.c b/drivers/acpi/acpica/exregion.c index b41e333eb8f3..1db2c0bfde0b 100644 --- a/drivers/acpi/acpica/exregion.c +++ b/drivers/acpi/acpica/exregion.c @@ -201,7 +201,7 @@ acpi_ex_system_memory_space_handler(u32 function, * Perform the memory read or write * * Note: For machines that do not support non-aligned transfers, the target - * address was checked for alignment above. We do not attempt to break the + * address was checked for alignment above. We do not attempt to break the * transfer up into smaller (byte-size) chunks because the AML specifically * asked for a transfer width that the hardware may require. */ diff --git a/drivers/acpi/acpica/exresnte.c b/drivers/acpi/acpica/exresnte.c index 1cb057fe8172..6239956786eb 100644 --- a/drivers/acpi/acpica/exresnte.c +++ b/drivers/acpi/acpica/exresnte.c @@ -57,8 +57,8 @@ ACPI_MODULE_NAME("exresnte") * PARAMETERS: object_ptr - Pointer to a location that contains * a pointer to a NS node, and will receive a * pointer to the resolved object. - * walk_state - Current state. Valid only if executing AML - * code. NULL if simply resolving an object + * walk_state - Current state. Valid only if executing AML + * code. NULL if simply resolving an object * * RETURN: Status * @@ -66,7 +66,7 @@ ACPI_MODULE_NAME("exresnte") * * Note: for some of the data types, the pointer attached to the Node * can be either a pointer to an actual internal object or a pointer into the - * AML stream itself. These types are currently: + * AML stream itself. These types are currently: * * ACPI_TYPE_INTEGER * ACPI_TYPE_STRING @@ -88,7 +88,7 @@ acpi_ex_resolve_node_to_value(struct acpi_namespace_node **object_ptr, ACPI_FUNCTION_TRACE(ex_resolve_node_to_value); /* - * The stack pointer points to a struct acpi_namespace_node (Node). Get the + * The stack pointer points to a struct acpi_namespace_node (Node). Get the * object that is attached to the Node. */ node = *object_ptr; diff --git a/drivers/acpi/acpica/exresolv.c b/drivers/acpi/acpica/exresolv.c index ae199e7cdfbb..cc176b245e22 100644 --- a/drivers/acpi/acpica/exresolv.c +++ b/drivers/acpi/acpica/exresolv.c @@ -326,7 +326,7 @@ acpi_ex_resolve_object_to_value(union acpi_operand_object **stack_ptr, * * RETURN: Status * - * DESCRIPTION: Return the base object and type. Traverse a reference list if + * DESCRIPTION: Return the base object and type. Traverse a reference list if * necessary to get to the base object. * ******************************************************************************/ diff --git a/drivers/acpi/acpica/exresop.c b/drivers/acpi/acpica/exresop.c index 04b70b38ebd5..b9ebff2f6a09 100644 --- a/drivers/acpi/acpica/exresop.c +++ b/drivers/acpi/acpica/exresop.c @@ -86,7 +86,7 @@ acpi_ex_check_object_type(acpi_object_type type_needed, if (type_needed == ACPI_TYPE_LOCAL_REFERENCE) { /* * Allow the AML "Constant" opcodes (Zero, One, etc.) to be reference - * objects and thus allow them to be targets. (As per the ACPI + * objects and thus allow them to be targets. (As per the ACPI * specification, a store to a constant is a noop.) */ if ((this_type == ACPI_TYPE_INTEGER) && @@ -638,7 +638,7 @@ acpi_ex_resolve_operands(u16 opcode, if (acpi_gbl_enable_interpreter_slack) { /* * Enable original behavior of Store(), allowing any and all - * objects as the source operand. The ACPI spec does not + * objects as the source operand. The ACPI spec does not * allow this, however. */ break; diff --git a/drivers/acpi/acpica/exstore.c b/drivers/acpi/acpica/exstore.c index 5fffe7ab5ece..90431f12f831 100644 --- a/drivers/acpi/acpica/exstore.c +++ b/drivers/acpi/acpica/exstore.c @@ -374,7 +374,7 @@ acpi_ex_store_object_to_index(union acpi_operand_object *source_desc, * with the input value. * * When storing into an object the data is converted to the - * target object type then stored in the object. This means + * target object type then stored in the object. This means * that the target object type (for an initialized target) will * not be changed by a store operation. * @@ -491,7 +491,7 @@ acpi_ex_store_object_to_node(union acpi_operand_object *source_desc, acpi_ut_get_object_type_name(source_desc), source_desc, node)); - /* No conversions for all other types. Just attach the source object */ + /* No conversions for all other types. Just attach the source object */ status = acpi_ns_attach_object(node, source_desc, source_desc->common.type); diff --git a/drivers/acpi/acpica/exstoren.c b/drivers/acpi/acpica/exstoren.c index 6fe6eacb3724..87153bbc4b43 100644 --- a/drivers/acpi/acpica/exstoren.c +++ b/drivers/acpi/acpica/exstoren.c @@ -60,7 +60,7 @@ ACPI_MODULE_NAME("exstoren") * * RETURN: Status, resolved object in source_desc_ptr. * - * DESCRIPTION: Resolve an object. If the object is a reference, dereference + * DESCRIPTION: Resolve an object. If the object is a reference, dereference * it and return the actual object in the source_desc_ptr. * ******************************************************************************/ @@ -92,7 +92,7 @@ acpi_ex_resolve_object(union acpi_operand_object **source_desc_ptr, /* * Stores into a Field/Region or into a Integer/Buffer/String - * are all essentially the same. This case handles the + * are all essentially the same. This case handles the * "interchangeable" types Integer, String, and Buffer. */ if (source_desc->common.type == ACPI_TYPE_LOCAL_REFERENCE) { @@ -166,7 +166,7 @@ acpi_ex_resolve_object(union acpi_operand_object **source_desc_ptr, * * RETURN: Status * - * DESCRIPTION: "Store" an object to another object. This may include + * DESCRIPTION: "Store" an object to another object. This may include * converting the source type to the target type (implicit * conversion), and a copy of the value of the source to * the target. @@ -177,14 +177,14 @@ acpi_ex_resolve_object(union acpi_operand_object **source_desc_ptr, * with the input value. * * When storing into an object the data is converted to the - * target object type then stored in the object. This means + * target object type then stored in the object. This means * that the target object type (for an initialized target) will * not be changed by a store operation. * * This module allows destination types of Number, String, * Buffer, and Package. * - * Assumes parameters are already validated. NOTE: source_desc + * Assumes parameters are already validated. NOTE: source_desc * resolution (from a reference object) must be performed by * the caller if necessary. * diff --git a/drivers/acpi/acpica/exstorob.c b/drivers/acpi/acpica/exstorob.c index b9ac30c11b5d..b5f339cb1305 100644 --- a/drivers/acpi/acpica/exstorob.c +++ b/drivers/acpi/acpica/exstorob.c @@ -107,7 +107,7 @@ acpi_ex_store_buffer_to_buffer(union acpi_operand_object *source_desc, #ifdef ACPI_OBSOLETE_BEHAVIOR /* * NOTE: ACPI versions up to 3.0 specified that the buffer must be - * truncated if the string is smaller than the buffer. However, "other" + * truncated if the string is smaller than the buffer. However, "other" * implementations of ACPI never did this and thus became the defacto * standard. ACPI 3.0A changes this behavior such that the buffer * is no longer truncated. @@ -116,7 +116,7 @@ acpi_ex_store_buffer_to_buffer(union acpi_operand_object *source_desc, /* * OBSOLETE BEHAVIOR: * If the original source was a string, we must truncate the buffer, - * according to the ACPI spec. Integer-to-Buffer and Buffer-to-Buffer + * according to the ACPI spec. Integer-to-Buffer and Buffer-to-Buffer * copy must not truncate the original buffer. */ if (original_src_type == ACPI_TYPE_STRING) { diff --git a/drivers/acpi/acpica/exsystem.c b/drivers/acpi/acpica/exsystem.c index 2d6d8bc12edb..c8a0ad5c1f55 100644 --- a/drivers/acpi/acpica/exsystem.c +++ b/drivers/acpi/acpica/exsystem.c @@ -58,7 +58,7 @@ ACPI_MODULE_NAME("exsystem") * RETURN: Status * * DESCRIPTION: Implements a semaphore wait with a check to see if the - * semaphore is available immediately. If it is not, the + * semaphore is available immediately. If it is not, the * interpreter is released before waiting. * ******************************************************************************/ @@ -103,7 +103,7 @@ acpi_status acpi_ex_system_wait_semaphore(acpi_semaphore semaphore, u16 timeout) * RETURN: Status * * DESCRIPTION: Implements a mutex wait with a check to see if the - * mutex is available immediately. If it is not, the + * mutex is available immediately. If it is not, the * interpreter is released before waiting. * ******************************************************************************/ @@ -151,7 +151,7 @@ acpi_status acpi_ex_system_wait_mutex(acpi_mutex mutex, u16 timeout) * DESCRIPTION: Suspend running thread for specified amount of time. * Note: ACPI specification requires that Stall() does not * relinquish the processor, and delays longer than 100 usec - * should use Sleep() instead. We allow stalls up to 255 usec + * should use Sleep() instead. We allow stalls up to 255 usec * for compatibility with other interpreters and existing BIOSs. * ******************************************************************************/ @@ -253,7 +253,7 @@ acpi_status acpi_ex_system_signal_event(union acpi_operand_object * obj_desc) * RETURN: Status * * DESCRIPTION: Provides an access point to perform synchronization operations - * within the AML. This operation is a request to wait for an + * within the AML. This operation is a request to wait for an * event. * ******************************************************************************/ diff --git a/drivers/acpi/acpica/exutils.c b/drivers/acpi/acpica/exutils.c index ff291e626ec9..264d22d8018c 100644 --- a/drivers/acpi/acpica/exutils.c +++ b/drivers/acpi/acpica/exutils.c @@ -44,12 +44,12 @@ /* * DEFINE_AML_GLOBALS is tested in amlcode.h * to determine whether certain global names should be "defined" or only - * "declared" in the current compilation. This enhances maintainability + * "declared" in the current compilation. This enhances maintainability * by enabling a single header file to embody all knowledge of the names * in question. * * Exactly one module of any executable should #define DEFINE_GLOBALS - * before #including the header files which use this convention. The + * before #including the header files which use this convention. The * names in question will be defined and initialized in that module, * and declared as extern in all other modules which #include those * header files. diff --git a/drivers/acpi/acpica/hwacpi.c b/drivers/acpi/acpica/hwacpi.c index bcf931ca1927..90a9aea1cee9 100644 --- a/drivers/acpi/acpica/hwacpi.c +++ b/drivers/acpi/acpica/hwacpi.c @@ -135,7 +135,7 @@ acpi_status acpi_hw_set_mode(u32 mode) * * RETURN: SYS_MODE_ACPI or SYS_MODE_LEGACY * - * DESCRIPTION: Return current operating state of system. Determined by + * DESCRIPTION: Return current operating state of system. Determined by * querying the SCI_EN bit. * ******************************************************************************/ diff --git a/drivers/acpi/acpica/hwtimer.c b/drivers/acpi/acpica/hwtimer.c index 19f6cce95f16..bfdce22f3798 100644 --- a/drivers/acpi/acpica/hwtimer.c +++ b/drivers/acpi/acpica/hwtimer.c @@ -127,7 +127,7 @@ ACPI_EXPORT_SYMBOL(acpi_get_timer) * a versatile and accurate timer. * * Note that this function accommodates only a single timer - * rollover. Thus for 24-bit timers, this function should only + * rollover. Thus for 24-bit timers, this function should only * be used for calculating durations less than ~4.6 seconds * (~20 minutes for 32-bit timers) -- calculations below: * diff --git a/drivers/acpi/acpica/nsalloc.c b/drivers/acpi/acpica/nsalloc.c index ac389e5bb594..15143c44f5e5 100644 --- a/drivers/acpi/acpica/nsalloc.c +++ b/drivers/acpi/acpica/nsalloc.c @@ -332,7 +332,7 @@ void acpi_ns_delete_children(struct acpi_namespace_node *parent_node) * * RETURN: None. * - * DESCRIPTION: Delete a subtree of the namespace. This includes all objects + * DESCRIPTION: Delete a subtree of the namespace. This includes all objects * stored within the subtree. * ******************************************************************************/ @@ -418,7 +418,7 @@ void acpi_ns_delete_namespace_subtree(struct acpi_namespace_node *parent_node) * RETURN: Status * * DESCRIPTION: Delete entries within the namespace that are owned by a - * specific ID. Used to delete entire ACPI tables. All + * specific ID. Used to delete entire ACPI tables. All * reference counts are updated. * * MUTEX: Locks namespace during deletion walk. diff --git a/drivers/acpi/acpica/nsdump.c b/drivers/acpi/acpica/nsdump.c index 993b12417e7f..924b3c71473a 100644 --- a/drivers/acpi/acpica/nsdump.c +++ b/drivers/acpi/acpica/nsdump.c @@ -692,7 +692,7 @@ void acpi_ns_dump_entry(acpi_handle handle, u32 debug_level) * * PARAMETERS: search_base - Root of subtree to be dumped, or * NS_ALL to dump the entire namespace - * max_depth - Maximum depth of dump. Use INT_MAX + * max_depth - Maximum depth of dump. Use INT_MAX * for an effectively unlimited depth. * * RETURN: None diff --git a/drivers/acpi/acpica/nsload.c b/drivers/acpi/acpica/nsload.c index 76935ff29289..911f99127b99 100644 --- a/drivers/acpi/acpica/nsload.c +++ b/drivers/acpi/acpica/nsload.c @@ -80,8 +80,8 @@ acpi_ns_load_table(u32 table_index, struct acpi_namespace_node *node) /* * Parse the table and load the namespace with all named - * objects found within. Control methods are NOT parsed - * at this time. In fact, the control methods cannot be + * objects found within. Control methods are NOT parsed + * at this time. In fact, the control methods cannot be * parsed until the entire namespace is loaded, because * if a control method makes a forward reference (call) * to another control method, we can't continue parsing @@ -122,7 +122,7 @@ acpi_ns_load_table(u32 table_index, struct acpi_namespace_node *node) } /* - * Now we can parse the control methods. We always parse + * Now we can parse the control methods. We always parse * them here for a sanity check, and if configured for * just-in-time parsing, we delete the control method * parse trees. @@ -166,7 +166,7 @@ acpi_status acpi_ns_load_namespace(void) } /* - * Load the namespace. The DSDT is required, + * Load the namespace. The DSDT is required, * but the SSDT and PSDT tables are optional. */ status = acpi_ns_load_table_by_type(ACPI_TABLE_ID_DSDT); @@ -283,7 +283,7 @@ static acpi_status acpi_ns_delete_subtree(acpi_handle start_handle) * RETURN: Status * * DESCRIPTION: Shrinks the namespace, typically in response to an undocking - * event. Deletes an entire subtree starting from (and + * event. Deletes an entire subtree starting from (and * including) the given handle. * ******************************************************************************/ diff --git a/drivers/acpi/acpica/nsobject.c b/drivers/acpi/acpica/nsobject.c index d6c9a3cc6716..e69f7fa2579d 100644 --- a/drivers/acpi/acpica/nsobject.c +++ b/drivers/acpi/acpica/nsobject.c @@ -61,7 +61,7 @@ ACPI_MODULE_NAME("nsobject") * RETURN: Status * * DESCRIPTION: Record the given object as the value associated with the - * name whose acpi_handle is passed. If Object is NULL + * name whose acpi_handle is passed. If Object is NULL * and Type is ACPI_TYPE_ANY, set the name as having no value. * Note: Future may require that the Node->Flags field be passed * as a parameter. @@ -133,7 +133,7 @@ acpi_ns_attach_object(struct acpi_namespace_node *node, ((struct acpi_namespace_node *)object)->object) { /* * Value passed is a name handle and that name has a - * non-null value. Use that name's value and type. + * non-null value. Use that name's value and type. */ obj_desc = ((struct acpi_namespace_node *)object)->object; object_type = ((struct acpi_namespace_node *)object)->type; @@ -321,7 +321,7 @@ union acpi_operand_object *acpi_ns_get_secondary_object(union * * RETURN: Status * - * DESCRIPTION: Low-level attach data. Create and attach a Data object. + * DESCRIPTION: Low-level attach data. Create and attach a Data object. * ******************************************************************************/ @@ -377,7 +377,7 @@ acpi_ns_attach_data(struct acpi_namespace_node *node, * * RETURN: Status * - * DESCRIPTION: Low-level detach data. Delete the data node, but the caller + * DESCRIPTION: Low-level detach data. Delete the data node, but the caller * is responsible for the actual data. * ******************************************************************************/ diff --git a/drivers/acpi/acpica/nsparse.c b/drivers/acpi/acpica/nsparse.c index ec7ba2d3463c..233f756d5cfa 100644 --- a/drivers/acpi/acpica/nsparse.c +++ b/drivers/acpi/acpica/nsparse.c @@ -168,11 +168,11 @@ acpi_ns_parse_table(u32 table_index, struct acpi_namespace_node *start_node) /* * AML Parse, pass 1 * - * In this pass, we load most of the namespace. Control methods - * are not parsed until later. A parse tree is not created. Instead, - * each Parser Op subtree is deleted when it is finished. This saves + * In this pass, we load most of the namespace. Control methods + * are not parsed until later. A parse tree is not created. Instead, + * each Parser Op subtree is deleted when it is finished. This saves * a great deal of memory, and allows a small cache of parse objects - * to service the entire parse. The second pass of the parse then + * to service the entire parse. The second pass of the parse then * performs another complete parse of the AML. */ ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "**** Start pass 1\n")); diff --git a/drivers/acpi/acpica/nsutils.c b/drivers/acpi/acpica/nsutils.c index ef753a41e087..16b3da80b92d 100644 --- a/drivers/acpi/acpica/nsutils.c +++ b/drivers/acpi/acpica/nsutils.c @@ -530,7 +530,7 @@ acpi_ns_externalize_name(u32 internal_name_length, ((num_segments > 0) ? (num_segments - 1) : 0) + 1; /* - * Check to see if we're still in bounds. If not, there's a problem + * Check to see if we're still in bounds. If not, there's a problem * with internal_name (invalid format). */ if (required_length > internal_name_length) { @@ -681,7 +681,7 @@ u32 acpi_ns_opens_scope(acpi_object_type type) * \ (backslash) and ^ (carat) prefixes, and the * . (period) to separate segments are supported. * prefix_node - Root of subtree to be searched, or NS_ALL for the - * root of the name space. If Name is fully + * root of the name space. If Name is fully * qualified (first s8 is '\'), the passed value * of Scope will not be accessed. * flags - Used to indicate whether to perform upsearch or @@ -689,7 +689,7 @@ u32 acpi_ns_opens_scope(acpi_object_type type) * return_node - Where the Node is returned * * DESCRIPTION: Look up a name relative to a given scope and return the - * corresponding Node. NOTE: Scope can be null. + * corresponding Node. NOTE: Scope can be null. * * MUTEX: Locks namespace * diff --git a/drivers/acpi/acpica/nswalk.c b/drivers/acpi/acpica/nswalk.c index 730bccc5e7f7..0483877f26b8 100644 --- a/drivers/acpi/acpica/nswalk.c +++ b/drivers/acpi/acpica/nswalk.c @@ -60,8 +60,8 @@ ACPI_MODULE_NAME("nswalk") * RETURN: struct acpi_namespace_node - Pointer to the NEXT child or NULL if * none is found. * - * DESCRIPTION: Return the next peer node within the namespace. If Handle - * is valid, Scope is ignored. Otherwise, the first node + * DESCRIPTION: Return the next peer node within the namespace. If Handle + * is valid, Scope is ignored. Otherwise, the first node * within Scope is returned. * ******************************************************************************/ @@ -97,8 +97,8 @@ struct acpi_namespace_node *acpi_ns_get_next_node(struct acpi_namespace_node * RETURN: struct acpi_namespace_node - Pointer to the NEXT child or NULL if * none is found. * - * DESCRIPTION: Return the next peer node within the namespace. If Handle - * is valid, Scope is ignored. Otherwise, the first node + * DESCRIPTION: Return the next peer node within the namespace. If Handle + * is valid, Scope is ignored. Otherwise, the first node * within Scope is returned. * ******************************************************************************/ @@ -305,7 +305,7 @@ acpi_ns_walk_namespace(acpi_object_type type, /* * Depth first search: Attempt to go down another level in the - * namespace if we are allowed to. Don't go any further if we have + * namespace if we are allowed to. Don't go any further if we have * reached the caller specified maximum depth or if the user * function has specified that the maximum depth has been reached. */ diff --git a/drivers/acpi/acpica/nsxfeval.c b/drivers/acpi/acpica/nsxfeval.c index ee4d873f9f0a..d6a9f77972b6 100644 --- a/drivers/acpi/acpica/nsxfeval.c +++ b/drivers/acpi/acpica/nsxfeval.c @@ -61,16 +61,16 @@ static void acpi_ns_resolve_references(struct acpi_evaluate_info *info); * PARAMETERS: handle - Object handle (optional) * pathname - Object pathname (optional) * external_params - List of parameters to pass to method, - * terminated by NULL. May be NULL + * terminated by NULL. May be NULL * if no parameters are being passed. * return_buffer - Where to put method's return value (if - * any). If NULL, no value is returned. + * any). If NULL, no value is returned. * return_type - Expected type of return object * * RETURN: Status * * DESCRIPTION: Find and evaluate the given object, passing the given - * parameters if necessary. One of "Handle" or "Pathname" must + * parameters if necessary. One of "Handle" or "Pathname" must * be valid (non-null) * ******************************************************************************/ @@ -155,15 +155,15 @@ ACPI_EXPORT_SYMBOL(acpi_evaluate_object_typed) * PARAMETERS: handle - Object handle (optional) * pathname - Object pathname (optional) * external_params - List of parameters to pass to method, - * terminated by NULL. May be NULL + * terminated by NULL. May be NULL * if no parameters are being passed. * return_buffer - Where to put method's return value (if - * any). If NULL, no value is returned. + * any). If NULL, no value is returned. * * RETURN: Status * * DESCRIPTION: Find and evaluate the given object, passing the given - * parameters if necessary. One of "Handle" or "Pathname" must + * parameters if necessary. One of "Handle" or "Pathname" must * be valid (non-null) * ******************************************************************************/ @@ -656,7 +656,7 @@ acpi_ns_get_device_callback(acpi_handle obj_handle, * DESCRIPTION: Performs a modified depth-first walk of the namespace tree, * starting (and ending) at the object specified by start_handle. * The user_function is called whenever an object of type - * Device is found. If the user function returns + * Device is found. If the user function returns * a non-zero value, the search is terminated immediately and this * value is returned to the caller. * diff --git a/drivers/acpi/acpica/nsxfname.c b/drivers/acpi/acpica/nsxfname.c index 7bc4985146f8..ce8789771176 100644 --- a/drivers/acpi/acpica/nsxfname.c +++ b/drivers/acpi/acpica/nsxfname.c @@ -69,8 +69,8 @@ static char *acpi_ns_copy_device_id(struct acpi_pnp_device_id *dest, * RETURN: Status * * DESCRIPTION: This routine will search for a caller specified name in the - * name space. The caller can restrict the search region by - * specifying a non NULL parent. The parent value is itself a + * name space. The caller can restrict the search region by + * specifying a non NULL parent. The parent value is itself a * namespace handle. * ******************************************************************************/ @@ -149,7 +149,7 @@ ACPI_EXPORT_SYMBOL(acpi_get_handle) * RETURN: Pointer to a string containing the fully qualified Name. * * DESCRIPTION: This routine returns the fully qualified name associated with - * the Handle parameter. This and the acpi_pathname_to_handle are + * the Handle parameter. This and the acpi_pathname_to_handle are * complementary functions. * ******************************************************************************/ diff --git a/drivers/acpi/acpica/nsxfobj.c b/drivers/acpi/acpica/nsxfobj.c index 6766fc4f088f..9d029dac6b64 100644 --- a/drivers/acpi/acpica/nsxfobj.c +++ b/drivers/acpi/acpica/nsxfobj.c @@ -220,8 +220,8 @@ ACPI_EXPORT_SYMBOL(acpi_get_parent) * * RETURN: Status * - * DESCRIPTION: Return the next peer object within the namespace. If Handle is - * valid, Scope is ignored. Otherwise, the first object within + * DESCRIPTION: Return the next peer object within the namespace. If Handle is + * valid, Scope is ignored. Otherwise, the first object within * Scope is returned. * ******************************************************************************/ diff --git a/drivers/acpi/acpica/psargs.c b/drivers/acpi/acpica/psargs.c index 844464c4f901..cb79e2d4d743 100644 --- a/drivers/acpi/acpica/psargs.c +++ b/drivers/acpi/acpica/psargs.c @@ -120,7 +120,7 @@ acpi_ps_get_next_package_length(struct acpi_parse_state *parser_state) * RETURN: Pointer to end-of-package +1 * * DESCRIPTION: Get next package length and return a pointer past the end of - * the package. Consumes the package length field + * the package. Consumes the package length field * ******************************************************************************/ @@ -147,8 +147,8 @@ u8 *acpi_ps_get_next_package_end(struct acpi_parse_state *parser_state) * RETURN: Pointer to the start of the name string (pointer points into * the AML. * - * DESCRIPTION: Get next raw namestring within the AML stream. Handles all name - * prefix characters. Set parser state to point past the string. + * DESCRIPTION: Get next raw namestring within the AML stream. Handles all name + * prefix characters. Set parser state to point past the string. * (Name is consumed from the AML.) * ******************************************************************************/ @@ -220,7 +220,7 @@ char *acpi_ps_get_next_namestring(struct acpi_parse_state *parser_state) * * DESCRIPTION: Get next name (if method call, return # of required args). * Names are looked up in the internal namespace to determine - * if the name represents a control method. If a method + * if the name represents a control method. If a method * is found, the number of arguments to the method is returned. * This information is critical for parsing to continue correctly. * diff --git a/drivers/acpi/acpica/psopcode.c b/drivers/acpi/acpica/psopcode.c index e5572a78bdb8..1793d934aa30 100644 --- a/drivers/acpi/acpica/psopcode.c +++ b/drivers/acpi/acpica/psopcode.c @@ -59,7 +59,7 @@ static const u8 acpi_gbl_argument_count[] = * * DESCRIPTION: Opcode table. Each entry contains <opcode, type, name, operands> * The name is a simple ascii string, the operand specifier is an - * ascii string with one letter per operand. The letter specifies + * ascii string with one letter per operand. The letter specifies * the operand type. * ******************************************************************************/ @@ -183,7 +183,7 @@ static const u8 acpi_gbl_argument_count[] = ******************************************************************************/ /* - * Master Opcode information table. A summary of everything we know about each + * Master Opcode information table. A summary of everything we know about each * opcode, all in one place. */ const struct acpi_opcode_info acpi_gbl_aml_op_info[AML_NUM_OPCODES] = { @@ -700,7 +700,7 @@ static const u8 acpi_gbl_short_op_index[256] = { /* * This table is indexed by the second opcode of the extended opcode - * pair. It returns an index into the opcode table (acpi_gbl_aml_op_info) + * pair. It returns an index into the opcode table (acpi_gbl_aml_op_info) */ static const u8 acpi_gbl_long_op_index[NUM_EXTENDED_OPCODE] = { /* 0 1 2 3 4 5 6 7 */ diff --git a/drivers/acpi/acpica/psparse.c b/drivers/acpi/acpica/psparse.c index dfdda00c6fff..2494caf47755 100644 --- a/drivers/acpi/acpica/psparse.c +++ b/drivers/acpi/acpica/psparse.c @@ -43,9 +43,9 @@ /* * Parse the AML and build an operation tree as most interpreters, - * like Perl, do. Parsing is done by hand rather than with a YACC + * like Perl, do. Parsing is done by hand rather than with a YACC * generated parser to tightly constrain stack and dynamic memory - * usage. At the same time, parsing is kept flexible and the code + * usage. At the same time, parsing is kept flexible and the code * fairly compact by parsing based on a list of AML opcode * templates in aml_op_info[] */ @@ -379,7 +379,7 @@ acpi_ps_next_parse_state(struct acpi_walk_state *walk_state, case AE_CTRL_FALSE: /* * Either an IF/WHILE Predicate was false or we encountered a BREAK - * opcode. In both cases, we do not execute the rest of the + * opcode. In both cases, we do not execute the rest of the * package; We simply close out the parent (finishing the walk of * this branch of the tree) and continue execution at the parent * level. @@ -488,7 +488,7 @@ acpi_status acpi_ps_parse_aml(struct acpi_walk_state *walk_state) acpi_gbl_current_walk_list = thread; /* - * Execute the walk loop as long as there is a valid Walk State. This + * Execute the walk loop as long as there is a valid Walk State. This * handles nested control method invocations without recursion. */ ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "State=%p\n", walk_state)); diff --git a/drivers/acpi/acpica/psutils.c b/drivers/acpi/acpica/psutils.c index 8736ad5f04d3..4137dcb352d1 100644 --- a/drivers/acpi/acpica/psutils.c +++ b/drivers/acpi/acpica/psutils.c @@ -108,7 +108,7 @@ void acpi_ps_init_op(union acpi_parse_object *op, u16 opcode) * RETURN: Pointer to the new Op, null on failure * * DESCRIPTION: Allocate an acpi_op, choose op type (and thus size) based on - * opcode. A cache of opcodes is available for the pure + * opcode. A cache of opcodes is available for the pure * GENERIC_OP, since this is by far the most commonly used. * ******************************************************************************/ @@ -164,7 +164,7 @@ union acpi_parse_object *acpi_ps_alloc_op(u16 opcode) * * RETURN: None. * - * DESCRIPTION: Free an Op object. Either put it on the GENERIC_OP cache list + * DESCRIPTION: Free an Op object. Either put it on the GENERIC_OP cache list * or actually free it. * ******************************************************************************/ diff --git a/drivers/acpi/acpica/rscalc.c b/drivers/acpi/acpica/rscalc.c index 42745676ecdc..685177985509 100644 --- a/drivers/acpi/acpica/rscalc.c +++ b/drivers/acpi/acpica/rscalc.c @@ -601,7 +601,7 @@ acpi_rs_get_pci_routing_table_length(union acpi_operand_object *package_object, /* * Calculate the size of the return buffer. * The base size is the number of elements * the sizes of the - * structures. Additional space for the strings is added below. + * structures. Additional space for the strings is added below. * The minus one is to subtract the size of the u8 Source[1] * member because it is added below. * diff --git a/drivers/acpi/acpica/tbxfroot.c b/drivers/acpi/acpica/tbxfroot.c index f8ee9b35b999..28f330230f99 100644 --- a/drivers/acpi/acpica/tbxfroot.c +++ b/drivers/acpi/acpica/tbxfroot.c @@ -107,7 +107,7 @@ static acpi_status acpi_tb_validate_rsdp(struct acpi_table_rsdp *rsdp) * RETURN: Status, RSDP physical address * * DESCRIPTION: Search lower 1Mbyte of memory for the root system descriptor - * pointer structure. If it is found, set *RSDP to point to it. + * pointer structure. If it is found, set *RSDP to point to it. * * NOTE1: The RSDP must be either in the first 1K of the Extended * BIOS Data Area or between E0000 and FFFFF (From ACPI Spec.) diff --git a/drivers/acpi/acpica/utcache.c b/drivers/acpi/acpica/utcache.c index eacb9ba2b9e0..e1d40ed26390 100644 --- a/drivers/acpi/acpica/utcache.c +++ b/drivers/acpi/acpica/utcache.c @@ -183,7 +183,7 @@ acpi_status acpi_os_delete_cache(struct acpi_memory_list * cache) * * RETURN: None * - * DESCRIPTION: Release an object to the specified cache. If cache is full, + * DESCRIPTION: Release an object to the specified cache. If cache is full, * the object is deleted. * ******************************************************************************/ @@ -240,9 +240,9 @@ acpi_os_release_object(struct acpi_memory_list * cache, void *object) * * PARAMETERS: cache - Handle to cache object * - * RETURN: the acquired object. NULL on error + * RETURN: the acquired object. NULL on error * - * DESCRIPTION: Get an object from the specified cache. If cache is empty, + * DESCRIPTION: Get an object from the specified cache. If cache is empty, * the object is allocated. * ******************************************************************************/ diff --git a/drivers/acpi/acpica/utdebug.c b/drivers/acpi/acpica/utdebug.c index 2c2179917649..7a3327067f20 100644 --- a/drivers/acpi/acpica/utdebug.c +++ b/drivers/acpi/acpica/utdebug.c @@ -223,7 +223,7 @@ ACPI_EXPORT_SYMBOL(acpi_debug_print) * * RETURN: None * - * DESCRIPTION: Print message with no headers. Has same interface as + * DESCRIPTION: Print message with no headers. Has same interface as * debug_print so that the same macros can be used. * ******************************************************************************/ @@ -259,7 +259,7 @@ ACPI_EXPORT_SYMBOL(acpi_debug_print_raw) * * RETURN: None * - * DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is + * DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is * set in debug_level * ******************************************************************************/ @@ -291,7 +291,7 @@ ACPI_EXPORT_SYMBOL(acpi_ut_trace) * * RETURN: None * - * DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is + * DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is * set in debug_level * ******************************************************************************/ @@ -321,7 +321,7 @@ acpi_ut_trace_ptr(u32 line_number, * * RETURN: None * - * DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is + * DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is * set in debug_level * ******************************************************************************/ @@ -352,7 +352,7 @@ acpi_ut_trace_str(u32 line_number, * * RETURN: None * - * DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is + * DESCRIPTION: Function entry trace. Prints only if TRACE_FUNCTIONS bit is * set in debug_level * ******************************************************************************/ @@ -382,7 +382,7 @@ acpi_ut_trace_u32(u32 line_number, * * RETURN: None * - * DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is + * DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is * set in debug_level * ******************************************************************************/ @@ -414,7 +414,7 @@ ACPI_EXPORT_SYMBOL(acpi_ut_exit) * * RETURN: None * - * DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is + * DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is * set in debug_level. Prints exit status also. * ******************************************************************************/ @@ -455,7 +455,7 @@ ACPI_EXPORT_SYMBOL(acpi_ut_status_exit) * * RETURN: None * - * DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is + * DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is * set in debug_level. Prints exit value also. * ******************************************************************************/ @@ -487,7 +487,7 @@ ACPI_EXPORT_SYMBOL(acpi_ut_value_exit) * * RETURN: None * - * DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is + * DESCRIPTION: Function exit trace. Prints only if TRACE_FUNCTIONS bit is * set in debug_level. Prints exit value also. * ******************************************************************************/ diff --git a/drivers/acpi/acpica/utmath.c b/drivers/acpi/acpica/utmath.c index d88a8aaab2a6..49563674833a 100644 --- a/drivers/acpi/acpica/utmath.c +++ b/drivers/acpi/acpica/utmath.c @@ -81,7 +81,7 @@ typedef union uint64_overlay { * RETURN: Status (Checks for divide-by-zero) * * DESCRIPTION: Perform a short (maximum 64 bits divided by 32 bits) - * divide and modulo. The result is a 64-bit quotient and a + * divide and modulo. The result is a 64-bit quotient and a * 32-bit remainder. * ******************************************************************************/ diff --git a/drivers/acpi/acpica/utmisc.c b/drivers/acpi/acpica/utmisc.c index 0fed4bcc84b6..7ba197298ef8 100644 --- a/drivers/acpi/acpica/utmisc.c +++ b/drivers/acpi/acpica/utmisc.c @@ -250,7 +250,7 @@ acpi_status acpi_ut_allocate_owner_id(acpi_owner_id * owner_id) * control method or unloading a table. Either way, we would * ignore any error anyway. * - * DESCRIPTION: Release a table or method owner ID. Valid IDs are 1 - 255 + * DESCRIPTION: Release a table or method owner ID. Valid IDs are 1 - 255 * ******************************************************************************/ @@ -534,8 +534,8 @@ u32 acpi_ut_dword_byte_swap(u32 value) * RETURN: None * * DESCRIPTION: Set the global integer bit width based upon the revision - * of the DSDT. For Revision 1 and 0, Integers are 32 bits. - * For Revision 2 and above, Integers are 64 bits. Yes, this + * of the DSDT. For Revision 1 and 0, Integers are 32 bits. + * For Revision 2 and above, Integers are 64 bits. Yes, this * makes a difference. * ******************************************************************************/ @@ -671,7 +671,7 @@ u8 acpi_ut_valid_acpi_char(char character, u32 position) * * RETURN: TRUE if the name is valid, FALSE otherwise * - * DESCRIPTION: Check for a valid ACPI name. Each character must be one of: + * DESCRIPTION: Check for a valid ACPI name. Each character must be one of: * 1) Upper case alpha * 2) numeric * 3) underscore @@ -1010,10 +1010,10 @@ acpi_ut_walk_package_tree(union acpi_operand_object *source_object, /* * Check for: - * 1) An uninitialized package element. It is completely + * 1) An uninitialized package element. It is completely * legal to declare a package and leave it uninitialized * 2) Not an internal object - can be a namespace node instead - * 3) Any type other than a package. Packages are handled in else + * 3) Any type other than a package. Packages are handled in else * case below. */ if ((!this_source_obj) || @@ -1032,7 +1032,7 @@ acpi_ut_walk_package_tree(union acpi_operand_object *source_object, state->pkg.source_object->package.count) { /* * We've handled all of the objects at this level, This means - * that we have just completed a package. That package may + * that we have just completed a package. That package may * have contained one or more packages itself. * * Delete this state and pop the previous state (package). diff --git a/drivers/acpi/acpica/utmutex.c b/drivers/acpi/acpica/utmutex.c index 93a119199335..5ccf57c0d87e 100644 --- a/drivers/acpi/acpica/utmutex.c +++ b/drivers/acpi/acpica/utmutex.c @@ -228,9 +228,9 @@ acpi_status acpi_ut_acquire_mutex(acpi_mutex_handle mutex_id) /* * Mutex debug code, for internal debugging only. * - * Deadlock prevention. Check if this thread owns any mutexes of value - * greater than or equal to this one. If so, the thread has violated - * the mutex ordering rule. This indicates a coding error somewhere in + * Deadlock prevention. Check if this thread owns any mutexes of value + * greater than or equal to this one. If so, the thread has violated + * the mutex ordering rule. This indicates a coding error somewhere in * the ACPI subsystem code. */ for (i = mutex_id; i < ACPI_NUM_MUTEX; i++) { @@ -321,9 +321,9 @@ acpi_status acpi_ut_release_mutex(acpi_mutex_handle mutex_id) /* * Mutex debug code, for internal debugging only. * - * Deadlock prevention. Check if this thread owns any mutexes of value - * greater than this one. If so, the thread has violated the mutex - * ordering rule. This indicates a coding error somewhere in + * Deadlock prevention. Check if this thread owns any mutexes of value + * greater than this one. If so, the thread has violated the mutex + * ordering rule. This indicates a coding error somewhere in * the ACPI subsystem code. */ for (i = mutex_id; i < ACPI_NUM_MUTEX; i++) { diff --git a/drivers/acpi/acpica/utobject.c b/drivers/acpi/acpica/utobject.c index 655f0799a391..5c52ca78f6fa 100644 --- a/drivers/acpi/acpica/utobject.c +++ b/drivers/acpi/acpica/utobject.c @@ -77,7 +77,7 @@ acpi_ut_get_element_length(u8 object_type, * * NOTE: We always allocate the worst-case object descriptor because * these objects are cached, and we want them to be - * one-size-satisifies-any-request. This in itself may not be + * one-size-satisifies-any-request. This in itself may not be * the most memory efficient, but the efficiency of the object * cache should more than make up for this! * @@ -370,9 +370,9 @@ u8 acpi_ut_valid_internal_object(void *object) * line_number - Caller's line number (for error output) * component_id - Caller's component ID (for error output) * - * RETURN: Pointer to newly allocated object descriptor. Null on error + * RETURN: Pointer to newly allocated object descriptor. Null on error * - * DESCRIPTION: Allocate a new object descriptor. Gracefully handle + * DESCRIPTION: Allocate a new object descriptor. Gracefully handle * error conditions. * ******************************************************************************/ @@ -554,7 +554,7 @@ acpi_ut_get_simple_object_size(union acpi_operand_object *internal_object, /* * Account for the space required by the object rounded up to the next - * multiple of the machine word size. This keeps each object aligned + * multiple of the machine word size. This keeps each object aligned * on a machine word boundary. (preventing alignment faults on some * machines.) */ diff --git a/drivers/acpi/acpica/utstate.c b/drivers/acpi/acpica/utstate.c index a1c988260073..cee0473ba813 100644 --- a/drivers/acpi/acpica/utstate.c +++ b/drivers/acpi/acpica/utstate.c @@ -147,7 +147,7 @@ union acpi_generic_state *acpi_ut_pop_generic_state(union acpi_generic_state * * RETURN: The new state object. NULL on failure. * - * DESCRIPTION: Create a generic state object. Attempt to obtain one from + * DESCRIPTION: Create a generic state object. Attempt to obtain one from * the global state cache; If none available, create a new one. * ******************************************************************************/ diff --git a/drivers/acpi/acpica/uttrack.c b/drivers/acpi/acpica/uttrack.c index e79c49d44d08..79f311c3d1c4 100644 --- a/drivers/acpi/acpica/uttrack.c +++ b/drivers/acpi/acpica/uttrack.c @@ -45,9 +45,9 @@ * These procedures are used for tracking memory leaks in the subsystem, and * they get compiled out when the ACPI_DBG_TRACK_ALLOCATIONS is not set. * - * Each memory allocation is tracked via a doubly linked list. Each + * Each memory allocation is tracked via a doubly linked list. Each * element contains the caller's component, module name, function name, and - * line number. acpi_ut_allocate and acpi_ut_allocate_zeroed call + * line number. acpi_ut_allocate and acpi_ut_allocate_zeroed call * acpi_ut_track_allocation to add an element to the list; deletion * occurs in the body of acpi_ut_free. */ @@ -499,7 +499,7 @@ void acpi_ut_dump_allocation_info(void) * FUNCTION: acpi_ut_dump_allocations * * PARAMETERS: component - Component(s) to dump info for. - * module - Module to dump info for. NULL means all. + * module - Module to dump info for. NULL means all. * * RETURN: None * diff --git a/drivers/acpi/acpica/utxface.c b/drivers/acpi/acpica/utxface.c index 0c98d42fb2fd..390db0ca5e2e 100644 --- a/drivers/acpi/acpica/utxface.c +++ b/drivers/acpi/acpica/utxface.c @@ -147,7 +147,7 @@ ACPI_EXPORT_SYMBOL(acpi_subsystem_status) * RETURN: status - the status of the call * * DESCRIPTION: This function is called to get information about the current - * state of the ACPI subsystem. It will return system information + * state of the ACPI subsystem. It will return system information * in the out_buffer. * * If the function fails an appropriate status will be returned diff --git a/include/acpi/acexcep.h b/include/acpi/acexcep.h index 19503449814f..6c3890e02140 100644 --- a/include/acpi/acexcep.h +++ b/include/acpi/acexcep.h @@ -122,7 +122,7 @@ #define AE_CODE_TBL_MAX 0x0005 /* - * AML exceptions. These are caused by problems with + * AML exceptions. These are caused by problems with * the actual AML byte stream */ #define AE_AML_BAD_OPCODE (acpi_status) (0x0001 | AE_CODE_AML) |