diff options
| -rw-r--r-- | drivers/net/dsa/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/dsa/bcm_sf2.c | 14 | ||||
| -rw-r--r-- | drivers/net/dsa/bcm_sf2.h | 17 | ||||
| -rw-r--r-- | drivers/net/dsa/bcm_sf2_cfp.c | 613 |
4 files changed, 645 insertions, 0 deletions
diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile index 8346e4f9737a..da9893478e21 100644 --- a/drivers/net/dsa/Makefile +++ b/drivers/net/dsa/Makefile @@ -1,5 +1,6 @@ obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o obj-$(CONFIG_NET_DSA_BCM_SF2) += bcm_sf2.o +bcm_sf2-objs += bcm_sf2_cfp.o obj-$(CONFIG_NET_DSA_QCA8K) += qca8k.o obj-y += b53/ diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index 637072da3acf..be282b430c50 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -1045,6 +1045,8 @@ static const struct dsa_switch_ops bcm_sf2_ops = { .port_fdb_dump = b53_fdb_dump, .port_fdb_add = b53_fdb_add, .port_fdb_del = b53_fdb_del, + .get_rxnfc = bcm_sf2_get_rxnfc, + .set_rxnfc = bcm_sf2_set_rxnfc, }; struct bcm_sf2_of_data { @@ -1168,6 +1170,12 @@ static int bcm_sf2_sw_probe(struct platform_device *pdev) spin_lock_init(&priv->indir_lock); mutex_init(&priv->stats_mutex); + mutex_init(&priv->cfp.lock); + + /* CFP rule #0 cannot be used for specific classifications, flag it as + * permanently used + */ + set_bit(0, priv->cfp.used); bcm_sf2_identify_ports(priv, dn->child); @@ -1197,6 +1205,12 @@ static int bcm_sf2_sw_probe(struct platform_device *pdev) return ret; } + ret = bcm_sf2_cfp_rst(priv); + if (ret) { + pr_err("failed to reset CFP\n"); + goto out_mdio; + } + /* Disable all interrupts and request them */ bcm_sf2_intr_disable(priv); diff --git a/drivers/net/dsa/bcm_sf2.h b/drivers/net/dsa/bcm_sf2.h index 6e1f74e4d471..7d3030e04f11 100644 --- a/drivers/net/dsa/bcm_sf2.h +++ b/drivers/net/dsa/bcm_sf2.h @@ -52,6 +52,13 @@ struct bcm_sf2_port_status { struct ethtool_eee eee; }; +struct bcm_sf2_cfp_priv { + /* Mutex protecting concurrent accesses to the CFP registers */ + struct mutex lock; + DECLARE_BITMAP(used, CFP_NUM_RULES); + unsigned int rules_cnt; +}; + struct bcm_sf2_priv { /* Base registers, keep those in order with BCM_SF2_REGS_NAME */ void __iomem *core; @@ -103,6 +110,9 @@ struct bcm_sf2_priv { /* Bitmask of ports needing BRCM tags */ unsigned int brcm_tag_mask; + + /* CFP rules context */ + struct bcm_sf2_cfp_priv cfp; }; static inline struct bcm_sf2_priv *bcm_sf2_to_priv(struct dsa_switch *ds) @@ -197,4 +207,11 @@ SF2_IO_MACRO(acb); SWITCH_INTR_L2(0); SWITCH_INTR_L2(1); +/* RXNFC */ +int bcm_sf2_get_rxnfc(struct dsa_switch *ds, int port, + struct ethtool_rxnfc *nfc, u32 *rule_locs); +int bcm_sf2_set_rxnfc(struct dsa_switch *ds, int port, + struct ethtool_rxnfc *nfc); +int bcm_sf2_cfp_rst(struct bcm_sf2_priv *priv); + #endif /* __BCM_SF2_H */ diff --git a/drivers/net/dsa/bcm_sf2_cfp.c b/drivers/net/dsa/bcm_sf2_cfp.c new file mode 100644 index 000000000000..c71be3e0dc2d --- /dev/null +++ b/drivers/net/dsa/bcm_sf2_cfp.c @@ -0,0 +1,613 @@ +/* + * Broadcom Starfighter 2 DSA switch CFP support + * + * Copyright (C) 2016, Broadcom + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/list.h> +#include <net/dsa.h> +#include <linux/ethtool.h> +#include <linux/if_ether.h> +#include <linux/in.h> +#include <linux/bitmap.h> + +#include "bcm_sf2.h" +#include "bcm_sf2_regs.h" + +struct cfp_udf_layout { + u8 slices[UDF_NUM_SLICES]; + u32 mask_value; + +}; + +/* UDF slices layout for a TCPv4/UDPv4 specification */ +static const struct cfp_udf_layout udf_tcpip4_layout = { + .slices = { + /* End of L2, byte offset 12, src IP[0:15] */ + CFG_UDF_EOL2 | 6, + /* End of L2, byte offset 14, src IP[16:31] */ + CFG_UDF_EOL2 | 7, + /* End of L2, byte offset 16, dst IP[0:15] */ + CFG_UDF_EOL2 | 8, + /* End of L2, byte offset 18, dst IP[16:31] */ + CFG_UDF_EOL2 | 9, + /* End of L3, byte offset 0, src port */ + CFG_UDF_EOL3 | 0, + /* End of L3, byte offset 2, dst port */ + CFG_UDF_EOL3 | 1, + 0, 0, 0 + }, + .mask_value = L3_FRAMING_MASK | IPPROTO_MASK | IP_FRAG, +}; + +static inline unsigned int bcm_sf2_get_num_udf_slices(const u8 *layout) +{ + unsigned int i, count = 0; + + for (i = 0; i < UDF_NUM_SLICES; i++) { + if (layout[i] != 0) + count++; + } + + return count; +} + +static void bcm_sf2_cfp_udf_set(struct bcm_sf2_priv *priv, + unsigned int slice_num, + const u8 *layout) +{ + u32 offset = CORE_UDF_0_A_0_8_PORT_0 + slice_num * UDF_SLICE_OFFSET; + unsigned int i; + + for (i = 0; i < UDF_NUM_SLICES; i++) + core_writel(priv, layout[i], offset + i * 4); +} + +static int bcm_sf2_cfp_op(struct bcm_sf2_priv *priv, unsigned int op) +{ + unsigned int timeout = 1000; + u32 reg; + + reg = core_readl(priv, CORE_CFP_ACC); + reg &= ~(OP_SEL_MASK | RAM_SEL_MASK); + reg |= OP_STR_DONE | op; + core_writel(priv, reg, CORE_CFP_ACC); + + do { + reg = core_readl(priv, CORE_CFP_ACC); + if (!(reg & OP_STR_DONE)) + break; + + cpu_relax(); + } while (timeout--); + + if (!timeout) + return -ETIMEDOUT; + + return 0; +} + +static inline void bcm_sf2_cfp_rule_addr_set(struct bcm_sf2_priv *priv, + unsigned int addr) +{ + u32 reg; + + WARN_ON(addr >= CFP_NUM_RULES); + + reg = core_readl(priv, CORE_CFP_ACC); + reg &= ~(XCESS_ADDR_MASK << XCESS_ADDR_SHIFT); + reg |= addr << XCESS_ADDR_SHIFT; + core_writel(priv, reg, CORE_CFP_ACC); +} + +static inline unsigned int bcm_sf2_cfp_rule_size(struct bcm_sf2_priv *priv) +{ + /* Entry #0 is reserved */ + return CFP_NUM_RULES - 1; +} + +static int bcm_sf2_cfp_rule_set(struct dsa_switch *ds, int port, + struct ethtool_rx_flow_spec *fs) +{ + struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds); + struct ethtool_tcpip4_spec *v4_spec; + const struct cfp_udf_layout *layout; + unsigned int slice_num, rule_index; + unsigned int queue_num, port_num; + u8 ip_proto, ip_frag; + u8 num_udf; + u32 reg; + int ret; + + /* Check for unsupported extensions */ + if ((fs->flow_type & FLOW_EXT) && + (fs->m_ext.vlan_etype || fs->m_ext.data[1])) + return -EINVAL; + + if (fs->location != RX_CLS_LOC_ANY && + test_bit(fs->location, priv->cfp.used)) + return -EBUSY; + + if (fs->location != RX_CLS_LOC_ANY && + fs->location > bcm_sf2_cfp_rule_size(priv)) + return -EINVAL; + + ip_frag = be32_to_cpu(fs->m_ext.data[0]); + + /* We do not support discarding packets, check that the + * destination port is enabled and that we are within the + * number of ports supported by the switch + */ + port_num = fs->ring_cookie / 8; + + if (fs->ring_cookie == RX_CLS_FLOW_DISC || + !(BIT(port_num) & ds->enabled_port_mask) || + port_num >= priv->hw_params.num_ports) + return -EINVAL; + + switch (fs->flow_type & ~FLOW_EXT) { + case TCP_V4_FLOW: + ip_proto = IPPROTO_TCP; + v4_spec = &fs->h_u.tcp_ip4_spec; + break; + case UDP_V4_FLOW: + ip_proto = IPPROTO_UDP; + v4_spec = &fs->h_u.udp_ip4_spec; + break; + default: + return -EINVAL; + } + + /* We only use one UDF slice for now */ + slice_num = 1; + layout = &udf_tcpip4_layout; + num_udf = bcm_sf2_get_num_udf_slices(layout->slices); + + /* Apply the UDF layout for this filter */ + bcm_sf2_cfp_udf_set(priv, slice_num, layout->slices); + + /* Apply to all packets received through this port */ + core_writel(priv, BIT(port), CORE_CFP_DATA_PORT(7)); + + /* S-Tag status [31:30] + * C-Tag status [29:28] + * L2 framing [27:26] + * L3 framing [25:24] + * IP ToS [23:16] + * IP proto [15:08] + * IP Fragm [7] + * Non 1st frag [6] + * IP Authen [5] + * TTL range [4:3] + * PPPoE session [2] + * Reserved [1] + * UDF_Valid[8] [0] + */ + core_writel(priv, v4_spec->tos << 16 | ip_proto << 8 | ip_frag << 7, + CORE_CFP_DATA_PORT(6)); + + /* UDF_Valid[7:0] [31:24] + * S-Tag [23:8] + * C-Tag [7:0] + */ + core_writel(priv, GENMASK(num_udf - 1, 0) << 24, CORE_CFP_DATA_PORT(5)); + + /* C-Tag [31:24] + * UDF_n_A8 [23:8] + * UDF_n_A7 [7:0] + */ + core_writel(priv, 0, CORE_CFP_DATA_PORT(4)); + + /* UDF_n_A7 [31:24] + * UDF_n_A6 [23:8] + * UDF_n_A5 [7:0] + */ + core_writel(priv, be16_to_cpu(v4_spec->pdst) >> 8, + CORE_CFP_DATA_PORT(3)); + + /* UDF_n_A5 [31:24] + * UDF_n_A4 [23:8] + * UDF_n_A3 [7:0] + */ + reg = (be16_to_cpu(v4_spec->pdst) & 0xff) << 24 | + (u32)be16_to_cpu(v4_spec->psrc) << 8 | + (be32_to_cpu(v4_spec->ip4dst) & 0x0000ff00) >> 8; + core_writel(priv, reg, CORE_CFP_DATA_PORT(2)); + + /* UDF_n_A3 [31:24] + * UDF_n_A2 [23:8] + * UDF_n_A1 [7:0] + */ + reg = (u32)(be32_to_cpu(v4_spec->ip4dst) & 0xff) << 24 | + (u32)(be32_to_cpu(v4_spec->ip4dst) >> 16) << 8 | + (be32_to_cpu(v4_spec->ip4src) & 0x0000ff00) >> 8; + core_writel(priv, reg, CORE_CFP_DATA_PORT(1)); + + /* UDF_n_A1 [31:24] + * UDF_n_A0 [23:8] + * Reserved [7:4] + * Slice ID [3:2] + * Slice valid [1:0] + */ + reg = (u32)(be32_to_cpu(v4_spec->ip4src) & 0xff) << 24 | + (u32)(be32_to_cpu(v4_spec->ip4src) >> 16) << 8 | + SLICE_NUM(slice_num) | SLICE_VALID; + core_writel(priv, reg, CORE_CFP_DATA_PORT(0)); + + /* Source port map match */ + core_writel(priv, 0xff, CORE_CFP_MASK_PORT(7)); + + /* Mask with the specific layout for IPv4 packets */ + core_writel(priv, layout->mask_value, CORE_CFP_MASK_PORT(6)); + + /* Mask all but valid UDFs */ + core_writel(priv, GENMASK(num_udf - 1, 0) << 24, CORE_CFP_MASK_PORT(5)); + + /* Mask all */ + core_writel(priv, 0, CORE_CFP_MASK_PORT(4)); + + /* All other UDFs should be matched with the filter */ + core_writel(priv, 0xff, CORE_CFP_MASK_PORT(3)); + core_writel(priv, 0xffffffff, CORE_CFP_MASK_PORT(2)); + core_writel(priv, 0xffffffff, CORE_CFP_MASK_PORT(1)); + core_writel(priv, 0xffffff0f, CORE_CFP_MASK_PORT(0)); + + /* Locate the first rule available */ + if (fs->location == RX_CLS_LOC_ANY) + rule_index = find_first_zero_bit(priv->cfp.used, + bcm_sf2_cfp_rule_size(priv)); + else + rule_index = fs->location; + + /* Insert into TCAM now */ + bcm_sf2_cfp_rule_addr_set(priv, rule_index); + + ret = bcm_sf2_cfp_op(priv, OP_SEL_WRITE | TCAM_SEL); + if (ret) { + pr_err("TCAM entry at addr %d failed\n", rule_index); + return ret; + } + + /* Replace ARL derived destination with DST_MAP derived, define + * which port and queue this should be forwarded to. + * + * We have a small oddity where Port 6 just does not have a + * valid bit here (so we subtract by one). + */ + queue_num = fs->ring_cookie % 8; + if (port_num >= 7) + port_num -= 1; + + reg = CHANGE_FWRD_MAP_IB_REP_ARL | BIT(port_num + DST_MAP_IB_SHIFT) | + CHANGE_TC | queue_num << NEW_TC_SHIFT; + + core_writel(priv, reg, CORE_ACT_POL_DATA0); + + /* Set classification ID that needs to be put in Broadcom tag */ + core_writel(priv, rule_index << CHAIN_ID_SHIFT, + CORE_ACT_POL_DATA1); + + core_writel(priv, 0, CORE_ACT_POL_DATA2); + + /* Configure policer RAM now */ + ret = bcm_sf2_cfp_op(priv, OP_SEL_WRITE | ACT_POL_RAM); + if (ret) { + pr_err("Policer entry at %d failed\n", rule_index); + return ret; + } + + /* Disable the policer */ + core_writel(priv, POLICER_MODE_DISABLE, CORE_RATE_METER0); + + /* Now the rate meter */ + ret = bcm_sf2_cfp_op(priv, OP_SEL_WRITE | RATE_METER_RAM); + if (ret) { + pr_err("Meter entry at %d failed\n", rule_index); + return ret; + } + + /* Turn on CFP for this rule now */ + reg = core_readl(priv, CORE_CFP_CTL_REG); + reg |= BIT(port); + core_writel(priv, reg, CORE_CFP_CTL_REG); + + /* Flag the rule as being used and return it */ + set_bit(rule_index, priv->cfp.used); + fs->location = rule_index; + + return 0; +} + +static int bcm_sf2_cfp_rule_del(struct bcm_sf2_priv *priv, int port, + u32 loc) +{ + int ret; + u32 reg; + + /* Refuse deletion of unused rules, and the default reserved rule */ + if (!test_bit(loc, priv->cfp.used) || loc == 0) + return -EINVAL; + + /* Indicate which rule we want to read */ + bcm_sf2_cfp_rule_addr_set(priv, loc); + + ret = bcm_sf2_cfp_op(priv, OP_SEL_READ | TCAM_SEL); + if (ret) + return ret; + + /* Clear its valid bits */ + reg = core_readl(priv, CORE_CFP_DATA_PORT(0)); + reg &= ~SLICE_VALID; + core_writel(priv, reg, CORE_CFP_DATA_PORT(0)); + + /* Write back this entry into the TCAM now */ + ret = bcm_sf2_cfp_op(priv, OP_SEL_WRITE | TCAM_SEL); + if (ret) + return ret; + + clear_bit(loc, priv->cfp.used); + + return 0; +} + +static void bcm_sf2_invert_masks(struct ethtool_rx_flow_spec *flow) +{ + unsigned int i; + + for (i = 0; i < sizeof(flow->m_u); i++) + flow->m_u.hdata[i] ^= 0xff; + + flow->m_ext.vlan_etype ^= cpu_to_be16(~0); + flow->m_ext.vlan_tci ^= cpu_to_be16(~0); + flow->m_ext.data[0] ^= cpu_to_be32(~0); + flow->m_ext.data[1] ^= cpu_to_be32(~0); +} + +static int bcm_sf2_cfp_rule_get(struct bcm_sf2_priv *priv, int port, + struct ethtool_rxnfc *nfc, bool search) +{ + struct ethtool_tcpip4_spec *v4_spec; + unsigned int queue_num; + u16 src_dst_port; + u32 reg, ipv4; + int ret; + + if (!search) { + bcm_sf2_cfp_rule_addr_set(priv, nfc->fs.location); + + ret = bcm_sf2_cfp_op(priv, OP_SEL_READ | ACT_POL_RAM); + if (ret) + return ret; + + reg = core_readl(priv, CORE_ACT_POL_DATA0); + + ret = bcm_sf2_cfp_op(priv, OP_SEL_READ | TCAM_SEL); + if (ret) + return ret; + } else { + reg = core_readl(priv, CORE_ACT_POL_DATA0); + } + + /* Extract the destination port */ + nfc->fs.ring_cookie = fls((reg >> DST_MAP_IB_SHIFT) & + DST_MAP_IB_MASK) - 1; + + /* There is no Port 6, so we compensate for that here */ + if (nfc->fs.ring_cookie >= 6) + nfc->fs.ring_cookie++; + nfc->fs.ring_cookie *= 8; + + /* Extract the destination queue */ + queue_num = (reg >> NEW_TC_SHIFT) & NEW_TC_MASK; + nfc->fs.ring_cookie += queue_num; + + /* Extract the IP protocol */ + reg = core_readl(priv, CORE_CFP_DATA_PORT(6)); + switch ((reg & IPPROTO_MASK) >> IPPROTO_SHIFT) { + case IPPROTO_TCP: + nfc->fs.flow_type = TCP_V4_FLOW; + v4_spec = &nfc->fs.h_u.tcp_ip4_spec; + break; + case IPPROTO_UDP: + nfc->fs.flow_type = UDP_V4_FLOW; + v4_spec = &nfc->fs.h_u.udp_ip4_spec; + break; + default: + /* Clear to exit the search process */ + if (search) + core_readl(priv, CORE_CFP_DATA_PORT(7)); + return -EINVAL; + } + + v4_spec->tos = (reg >> 16) & IPPROTO_MASK; + nfc->fs.m_ext.data[0] = cpu_to_be32((reg >> 7) & 1); + + reg = core_readl(priv, CORE_CFP_DATA_PORT(3)); + /* src port [15:8] */ + src_dst_port = reg << 8; + + reg = core_readl(priv, CORE_CFP_DATA_PORT(2)); + /* src port [7:0] */ + src_dst_port |= (reg >> 24); + + v4_spec->pdst = cpu_to_be16(src_dst_port); + nfc->fs.m_u.tcp_ip4_spec.pdst = cpu_to_be16(~0); + v4_spec->psrc = cpu_to_be16((u16)(reg >> 8)); + nfc->fs.m_u.tcp_ip4_spec.psrc = cpu_to_be16(~0); + + /* IPv4 dst [15:8] */ + ipv4 = (u16)(reg & 0xff) << 8; + reg = core_readl(priv, CORE_CFP_DATA_PORT(1)); + /* IPv4 dst [31:16] */ + ipv4 |= (u32)((reg >> 8) & 0xffffff) << 16; + /* IPv4 dst [7:0] */ + ipv4 |= (reg >> 24) & 0xff; + v4_spec->ip4dst = cpu_to_be32(ipv4); + nfc->fs.m_u.tcp_ip4_spec.ip4dst = cpu_to_be32(~0); + + /* IPv4 src [15:8] */ + ipv4 = (u16)(reg & 0xff) << 8; + reg = core_readl(priv, CORE_CFP_DATA_PORT(0)); + + if (!(reg & SLICE_VALID)) + return -EINVAL; + + /* IPv4 src [7:0] */ + ipv4 |= (reg >> 24) & 0xff; + /* IPv4 src [31:16] */ + ipv4 |= ((reg >> 8) & 0xffffff) << 16; + v4_spec->ip4src = cpu_to_be32(ipv4); + nfc->fs.m_u.tcp_ip4_spec.ip4src = cpu_to_be32(~0); + + /* Read last to avoid next entry clobbering the results during search + * operations + */ + reg = core_readl(priv, CORE_CFP_DATA_PORT(7)); + if (!(reg & 1 << port)) + return -EINVAL; + + bcm_sf2_invert_masks(&nfc->fs); + + /* Put the TCAM size here */ + nfc->data = bcm_sf2_cfp_rule_size(priv); + + return 0; +} + +/* We implement the search doing a TCAM search operation */ +static int bcm_sf2_cfp_rule_get_all(struct bcm_sf2_priv *priv, + int port, struct ethtool_rxnfc *nfc, + u32 *rule_locs) +{ + unsigned int index = 1, rules_cnt = 0; + int ret; + u32 reg; + + /* Do not poll on OP_STR_DONE to be self-clearing for search + * operations, we cannot use bcm_sf2_cfp_op here because it completes + * on clearing OP_STR_DONE which won't clear until the entire search + * operation is over. + */ + reg = core_readl(priv, CORE_CFP_ACC); + reg &= ~(XCESS_ADDR_MASK << XCESS_ADDR_SHIFT); + reg |= index << XCESS_ADDR_SHIFT; + reg &= ~(OP_SEL_MASK | RAM_SEL_MASK); + reg |= OP_SEL_SEARCH | TCAM_SEL | OP_STR_DONE; + core_writel(priv, reg, CORE_CFP_ACC); + + do { + /* Wait for results to be ready */ + reg = core_readl(priv, CORE_CFP_ACC); + + /* Extract the address we are searching */ + index = reg >> XCESS_ADDR_SHIFT; + index &= XCESS_ADDR_MASK; + + /* We have a valid search result, so flag it accordingly */ + if (reg & SEARCH_STS) { + ret = bcm_sf2_cfp_rule_get(priv, port, nfc, true); + if (ret) + continue; + + rule_locs[rules_cnt] = index; + rules_cnt++; + } + + /* Search is over break out */ + if (!(reg & OP_STR_DONE)) + break; + + } while (index < CFP_NUM_RULES); + + /* Put the TCAM size here */ + nfc->data = bcm_sf2_cfp_rule_size(priv); + nfc->rule_cnt = rules_cnt; + + return 0; +} + +int bcm_sf2_get_rxnfc(struct dsa_switch *ds, int port, + struct ethtool_rxnfc *nfc, u32 *rule_locs) +{ + struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds); + int ret = 0; + + mutex_lock(&priv->cfp.lock); + + switch (nfc->cmd) { + case ETHTOOL_GRXCLSRLCNT: + /* Subtract the default, unusable rule */ + nfc->rule_cnt = bitmap_weight(priv->cfp.used, + CFP_NUM_RULES) - 1; + /* We support specifying rule locations */ + nfc->data |= RX_CLS_LOC_SPECIAL; + break; + case ETHTOOL_GRXCLSRULE: + ret = bcm_sf2_cfp_rule_get(priv, port, nfc, false); + break; + case ETHTOOL_GRXCLSRLALL: + ret = bcm_sf2_cfp_rule_get_all(priv, port, nfc, rule_locs); + break; + default: + ret = -EOPNOTSUPP; + break; + } + + mutex_unlock(&priv->cfp.lock); + + return ret; +} + +int bcm_sf2_set_rxnfc(struct dsa_switch *ds, int port, + struct ethtool_rxnfc *nfc) +{ + struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds); + int ret = 0; + + mutex_lock(&priv->cfp.lock); + + switch (nfc->cmd) { + case ETHTOOL_SRXCLSRLINS: + ret = bcm_sf2_cfp_rule_set(ds, port, &nfc->fs); + break; + + case ETHTOOL_SRXCLSRLDEL: + ret = bcm_sf2_cfp_rule_del(priv, port, nfc->fs.location); + break; + default: + ret = -EOPNOTSUPP; + break; + } + + mutex_unlock(&priv->cfp.lock); + + return ret; +} + +int bcm_sf2_cfp_rst(struct bcm_sf2_priv *priv) +{ + unsigned int timeout = 1000; + u32 reg; + + reg = core_readl(priv, CORE_CFP_ACC); + reg |= TCAM_RESET; + core_writel(priv, reg, CORE_CFP_ACC); + + do { + reg = core_readl(priv, CORE_CFP_ACC); + if (!(reg & TCAM_RESET)) + break; + + cpu_relax(); + } while (timeout--); + + if (!timeout) + return -ETIMEDOUT; + + return 0; +} |