diff options
93 files changed, 5919 insertions, 2050 deletions
@@ -1933,6 +1933,9 @@ N: Kukjin Kim E: kgene@kernel.org D: Samsung S3C, S5P and Exynos ARM architectures +N: Milo Kim +D: TI LP855x, LP8727 and LP8788 drivers + N: Sangbeom Kim E: sbkim73@samsung.com D: Samsung SoC Audio (ASoC) drivers diff --git a/Documentation/devicetree/bindings/input/input.yaml b/Documentation/devicetree/bindings/input/input.yaml index 3fc37478c0c0..74244d21d2b3 100644 --- a/Documentation/devicetree/bindings/input/input.yaml +++ b/Documentation/devicetree/bindings/input/input.yaml @@ -33,4 +33,11 @@ properties: power off automatically. Device with key pressed shutdown feature can specify this property. + reset-time-sec: + description: + Duration in seconds which the key should be kept pressed for device to + reset automatically. Device with key pressed reset feature can specify + this property. + $ref: /schemas/types.yaml#/definitions/uint32 + additionalProperties: true diff --git a/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml b/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml new file mode 100644 index 000000000000..dd43a0c766f3 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml @@ -0,0 +1,183 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/actions,atc260x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Actions Semi ATC260x Power Management IC bindings + +maintainers: + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + - Cristian Ciocaltea <cristian.ciocaltea@gmail.com> + +description: | + ATC260x series PMICs integrates Audio Codec, Power Management, RTC, IR + and GPIO controller blocks. Currently only the PM related functionalities + (i.e. regulators and system power-off/reboot) for the ATC2603C and ATC2609A + chip variants are supported. + ATC2603C includes 3 programmable DC-DC converters, 9 programmable LDO + regulators and 1 fixed LDO regulator. + ATC2609A includes 5 programmable DC-DC converters and 10 programmable LDO + regulators. + +allOf: + - $ref: ../input/input.yaml + +properties: + compatible: + enum: + - actions,atc2603c + - actions,atc2609a + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-time-sec: + description: | + Duration in seconds which the key should be kept pressed for device + to reset automatically. The hardware default is 8. Use 0 to disable + this functionality. + enum: [0, 6, 8, 10, 12] + + regulators: + type: object + description: | + List of child nodes specifying the regulators, depending on chip variant: + * ATC2603C: dcdc[1-3], ldo[1-3,5-8,11,12], switchldo1 + * ATC2609A: dcdc[0-4], ldo[0-9] + + properties: + compatible: + enum: + - actions,atc2603c-regulator + - actions,atc2609a-regulator + + switchldo1: + type: object + $ref: ../regulator/regulator.yaml + + properties: + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + regulator-min-microvolt: true + regulator-max-microvolt: true + regulator-allow-bypass: true + regulator-active-discharge: true + + additionalProperties: false + + patternProperties: + "^(dcdc[0-4]|ldo[0-9]|ldo1[1-2]|switchldo1)-supply$": + description: ATC260x voltage regulators supplies + + "^(dcdc[0-4]|ldo[0-9]|ldo1[1-2])$": + type: object + $ref: ../regulator/regulator.yaml + + properties: + regulator-name: true + regulator-boot-on: true + regulator-always-on: true + regulator-min-microvolt: true + regulator-max-microvolt: true + regulator-allow-bypass: true + + additionalProperties: false + + allOf: + - if: + properties: + compatible: + contains: + const: actions,atc2603c-regulator + then: + patternProperties: + "^(dcdc[0,4]|ldo[0,4,9])(-supply)?$": false + + "^(ldo|dcdc)": + properties: + regulator-allow-bypass: false + - if: + properties: + compatible: + contains: + const: actions,atc2609a-regulator + then: + patternProperties: + "^(ldo1[1-2]|switchldo1)(-supply)?$": false + + "^(dcdc|ldo[3-9])": + properties: + regulator-allow-bypass: false + + required: + - compatible + + additionalProperties: false + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + pmic@65 { + compatible = "actions,atc2603c"; + reg = <0x65>; + interrupt-parent = <&sirq>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + + reset-time-sec = <6>; + + regulators { + compatible = "actions,atc2603c-regulator"; + + dcdc1-supply = <®_5v0>; + dcdc3-supply = <®_5v0>; + ldo5-supply = <®_5v0>; + switchldo1-supply = <&vcc>; + + vdd_cpu: dcdc1 { + regulator-name = "VDD_CPU"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + }; + + vcc: dcdc3 { + regulator-name = "VCC"; + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vcc_3v1: ldo5 { + regulator-name = "VCC_3V1"; + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <3300000>; + }; + + sd_vcc: switchldo1 { + regulator-name = "SD_VCC"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml b/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml new file mode 100644 index 000000000000..59a630025f52 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/netronix,ntxec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Netronix Embedded Controller + +maintainers: + - Jonathan Neuschäfer <j.neuschaefer@gmx.net> + +description: | + This EC is found in e-book readers of multiple brands (e.g. Kobo, Tolino), and + is typically implemented as a TI MSP430 microcontroller. + +properties: + compatible: + const: netronix,ntxec + + reg: + items: + - description: The I2C address of the EC + + system-power-controller: + type: boolean + description: See Documentation/devicetree/bindings/power/power-controller.txt + + interrupts: + minItems: 1 + description: + The EC can signal interrupts via a GPIO line + + "#pwm-cells": + const: 2 + description: | + Number of cells in a PWM specifier. + + The following PWM channels are supported: + - 0: The PWM channel controlled by registers 0xa1-0xa7 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ec: embedded-controller@43 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ntxec>; + + compatible = "netronix,ntxec"; + reg = <0x43>; + system-power-controller; + interrupt-parent = <&gpio4>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + #pwm-cells = <2>; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&ec 0 50000>; + power-supply = <&backlight_regulator>; + }; + + backlight_regulator: regulator-dummy { + compatible = "regulator-fixed"; + regulator-name = "backlight"; + }; diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt deleted file mode 100644 index 9e5eba4a4f0d..000000000000 --- a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt +++ /dev/null @@ -1,99 +0,0 @@ -Qualcomm PM8xxx PMIC multi-function devices - -The PM8xxx family of Power Management ICs are used to provide regulated -voltages and other various functionality to Qualcomm SoCs. - -= PROPERTIES - -- compatible: - Usage: required - Value type: <string> - Definition: must be one of: - "qcom,pm8058" - "qcom,pm8821" - "qcom,pm8921" - -- #address-cells: - Usage: required - Value type: <u32> - Definition: must be 1 - -- #size-cells: - Usage: required - Value type: <u32> - Definition: must be 0 - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: specifies the interrupt that indicates a subdevice - has generated an interrupt (summary interrupt). The - format of the specifier is defined by the binding document - describing the node's interrupt parent. - -- #interrupt-cells: - Usage: required - Value type : <u32> - Definition: must be 2. Specifies the number of cells needed to encode - an interrupt source. The 1st cell contains the interrupt - number. The 2nd cell is the trigger type and level flags - encoded as follows: - - 1 = low-to-high edge triggered - 2 = high-to-low edge triggered - 4 = active high level-sensitive - 8 = active low level-sensitive - -- interrupt-controller: - Usage: required - Value type: <empty> - Definition: identifies this node as an interrupt controller - -= SUBCOMPONENTS - -The PMIC contains multiple independent functions, each described in a subnode. -The below bindings specify the set of valid subnodes. - -== Real-Time Clock - -- compatible: - Usage: required - Value type: <string> - Definition: must be one of: - "qcom,pm8058-rtc" - "qcom,pm8921-rtc" - "qcom,pm8941-rtc" - "qcom,pm8018-rtc" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: single entry specifying the base address of the RTC registers - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: single entry specifying the RTC's alarm interrupt - -- allow-set-time: - Usage: optional - Value type: <empty> - Definition: indicates that the setting of RTC time is allowed by - the host CPU - -= EXAMPLE - - pmicintc: pmic@0 { - compatible = "qcom,pm8921"; - interrupts = <104 8>; - #interrupt-cells = <2>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - - rtc@11d { - compatible = "qcom,pm8921-rtc"; - reg = <0x11d>; - interrupts = <0x27 0>; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml new file mode 100644 index 000000000000..9065ec53e643 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/qcom-pm8xxx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PM8xxx PMIC multi-function devices + +maintainers: + - Satya Priya <skakit@codeaurora.org> + +description: | + The PM8xxx family of Power Management ICs are used to provide regulated + voltages and other various functionality to Qualcomm SoCs. + +properties: + compatible: + enum: + - qcom,pm8058 + - qcom,pm8821 + - qcom,pm8921 + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + interrupts: + maxItems: 1 + + '#interrupt-cells': + const: 2 + + interrupt-controller: true + +patternProperties: + "rtc@[0-9a-f]+$": + type: object + $ref: "../rtc/qcom-pm8xxx-rtc.yaml" + +required: + - compatible + - '#address-cells' + - '#size-cells' + - interrupts + - '#interrupt-cells' + - interrupt-controller + +additionalProperties: false +... diff --git a/Documentation/devicetree/bindings/mfd/ricoh,rn5t618.yaml b/Documentation/devicetree/bindings/mfd/ricoh,rn5t618.yaml new file mode 100644 index 000000000000..032a7fb0b4a7 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ricoh,rn5t618.yaml @@ -0,0 +1,111 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ricoh,rn5t618.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ricoh RN5T567/RN5T618/RC5T619 PMIC + +maintainers: + - Andreas Kemnade <andreas@kemnade.info> + +description: | + Ricoh RN5T567/RN5T618/RC5T619 is a power management IC family which + integrates 3 to 5 step-down DCDC converters, 7 to 10 low-dropout regulators, + GPIOs, and a watchdog timer. It can be controlled through an I2C interface. + The RN5T618/RC5T619 provides additionally a Li-ion battery charger, + fuel gauge, and an ADC. + The RC5T619 additionally includes USB charger detection and an RTC. + +allOf: + - if: + properties: + compatible: + contains: + const: ricoh,rn5t567 + then: + properties: + regulators: + patternProperties: + "^(DCDC[1-4]|LDO[1-5]|LDORTC[12])$": + $ref: ../regulator/regulator.yaml + additionalProperties: false + - if: + properties: + compatible: + contains: + const: ricoh,rn5t618 + then: + properties: + regulators: + patternProperties: + "^(DCDC[1-3]|LDO[1-5]|LDORTC[12])$": + $ref: ../regulator/regulator.yaml + additionalProperties: false + - if: + properties: + compatible: + contains: + const: ricoh,rc5t619 + then: + properties: + regulators: + patternProperties: + "^(DCDC[1-5]|LDO[1-9]|LDO10|LDORTC[12])$": + $ref: ../regulator/regulator.yaml + additionalProperties: false + +properties: + compatible: + enum: + - ricoh,rn5t567 + - ricoh,rn5t618 + - ricoh,rc5t619 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + system-power-controller: + type: boolean + description: | + See Documentation/devicetree/bindings/power/power-controller.txt + + regulators: + type: object + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@32 { + compatible = "ricoh,rn5t618"; + reg = <0x32>; + interrupt-parent = <&gpio5>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + system-power-controller; + + regulators { + DCDC1 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + DCDC2 { + regulator-min-microvolt = <1175000>; + regulator-max-microvolt = <1175000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rn5t618.txt b/Documentation/devicetree/bindings/mfd/rn5t618.txt deleted file mode 100644 index 16778ea00dbc..000000000000 --- a/Documentation/devicetree/bindings/mfd/rn5t618.txt +++ /dev/null @@ -1,52 +0,0 @@ -* Ricoh RN5T567/RN5T618 PMIC - -Ricoh RN5T567/RN5T618/RC5T619 is a power management IC family which -integrates 3 to 5 step-down DCDC converters, 7 to 10 low-dropout regulators, -GPIOs, and a watchdog timer. It can be controlled through an I2C interface. -The RN5T618/RC5T619 provides additionally a Li-ion battery charger, -fuel gauge, and an ADC. -The RC5T619 additionnally includes USB charger detection and an RTC. - -Required properties: - - compatible: must be one of - "ricoh,rn5t567" - "ricoh,rn5t618" - "ricoh,rc5t619" - - reg: the I2C slave address of the device - -Optional properties: - - interrupts: interrupt mapping for IRQ - See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - - system-power-controller: - See Documentation/devicetree/bindings/power/power-controller.txt - -Sub-nodes: - - regulators: the node is required if the regulator functionality is - needed. The valid regulator names are: DCDC1, DCDC2, DCDC3, DCDC4 - (RN5T567/RC5T619), LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7, LDO8, - LDO9, LDO10, LDORTC1 and LDORTC2. - LDO7-10 are specific to RC5T619. - The common bindings for each individual regulator can be found in: - Documentation/devicetree/bindings/regulator/regulator.txt - -Example: - - pmic@32 { - compatible = "ricoh,rn5t618"; - reg = <0x32>; - interrupt-parent = <&gpio5>; - interrupts = <11 IRQ_TYPE_EDGE_FALLING>; - system-power-controller; - - regulators { - DCDC1 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - }; - - DCDC2 { - regulator-min-microvolt = <1175000>; - regulator-max-microvolt = <1175000>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml new file mode 100644 index 000000000000..fe265bcab50d --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml @@ -0,0 +1,201 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rohm,bd71815-pmic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD71815 Power Management Integrated Circuit bindings + +maintainers: + - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> + +description: | + BD71815AGW is a single-chip power management ICs for battery-powered + portable devices. It integrates 5 buck converters, 8 LDOs, a boost driver + for LED and a 500 mA single-cell linear charger. Also included is a Coulomb + counter, a real-time clock (RTC), and a 32.768 kHz clock gate and two GPOs. + +properties: + compatible: + const: rohm,bd71815 + + reg: + description: + I2C slave address. + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: | + The first cell is the pin number and the second cell is used to specify + flags. See ../gpio/gpio.txt for more information. + + clocks: + maxItems: 1 + + "#clock-cells": + const: 0 + + clock-output-names: + const: bd71815-32k-out + + rohm,clkout-open-drain: + description: clk32kout mode. Set to 1 for "open-drain" or 0 for "cmos". + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 1 + + rohm,charger-sense-resistor-ohms: + minimum: 10000000 + maximum: 50000000 + description: | + BD71827 and BD71828 have SAR ADC for measuring charging currents. + External sense resistor (RSENSE in data sheet) should be used. If + something other but 30MOhm resistor is used the resistance value + should be given here in Ohms. + default: 30000000 + + regulators: + $ref: ../regulator/rohm,bd71815-regulator.yaml + description: + List of child nodes that specify the regulators. + + gpio-reserved-ranges: + description: | + Usage of BD71828 GPIO pins can be changed via OTP. This property can be + used to mark the pins which should not be configured for GPIO. Please see + the ../gpio/gpio.txt for more information. + + rohm,enable-hidden-gpo: + description: | + The BD71815 has undocumented GPO at pin E5. Pin is marked as GND at the + data-sheet as it's location in the middle of GND pins makes it hard to + use on PCB. If your board has managed to use this pin you can enable the + second GPO by defining this property. Dont enable this if you are unsure + about how the E5 pin is connected on your board. + type: boolean + +required: + - compatible + - reg + - interrupts + - clocks + - "#clock-cells" + - regulators + - gpio-controller + - "#gpio-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/leds/common.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic: pmic@4b { + compatible = "rohm,bd71815"; + reg = <0x4b>; + + interrupt-parent = <&gpio1>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + + clocks = <&osc 0>; + #clock-cells = <0>; + clock-output-names = "bd71815-32k-out"; + + gpio-controller; + #gpio-cells = <2>; + + rohm,charger-sense-resistor-ohms = <10000000>; + + regulators { + buck1: buck1 { + regulator-name = "buck1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1150000>; + rohm,dvs-suspend-voltage = <950000>; + }; + buck2: buck2 { + regulator-name = "buck2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1150000>; + rohm,dvs-suspend-voltage = <950000>; + }; + buck3: buck3 { + regulator-name = "buck3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2700000>; + regulator-always-on; + }; + buck4: buck4 { + regulator-name = "buck4"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-always-on; + }; + buck5: buck5 { + regulator-name = "buck5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + ldo1: ldo1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + ldo2: ldo2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + ldo3: ldo3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + ldo4: ldo4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + ldo5: ldo5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + ldo6: ldodvref { + regulator-name = "ldodvref"; + regulator-always-on; + }; + ldo7: ldolpsr { + regulator-name = "ldolpsr"; + regulator-always-on; + }; + + boost: wled { + regulator-name = "wled"; + regulator-min-microamp = <10>; + regulator-max-microamp = <25000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml index 3a6a1a26e2b3..8380166d176c 100644 --- a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml @@ -44,6 +44,12 @@ properties: clock-output-names: const: bd71828-32k-out + rohm,clkout-open-drain: + description: clk32kout mode. Set to 1 for "open-drain" or 0 for "cmos". + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 1 + rohm,charger-sense-resistor-ohms: minimum: 10000000 maximum: 50000000 diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml new file mode 100644 index 000000000000..6483860da955 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rohm,bd9576-pmic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD9576MUF and BD9573MUF Power Management Integrated Circuit bindings + +maintainers: + - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> + +description: | + BD9576MUF and BD9573MUF are power management ICs primarily intended for + powering the R-Car series processors. + The IC provides 6 power outputs with configurable sequencing and safety + monitoring. A watchdog logic with slow ping/windowed modes is also included. + +properties: + compatible: + enum: + - rohm,bd9576 + - rohm,bd9573 + + reg: + description: + I2C slave address. + maxItems: 1 + + interrupts: + maxItems: 1 + + rohm,vout1-en-low: + description: + BD9576 and BD9573 VOUT1 regulator enable state can be individually + controlled by a GPIO. This is dictated by state of vout1-en pin during + the PMIC startup. If vout1-en is LOW during PMIC startup then the VOUT1 + enable sate is controlled via this pin. Set this property if vout1-en + is wired to be down at PMIC start-up. + type: boolean + + rohm,vout1-en-gpios: + description: + GPIO specifier to specify the GPIO connected to vout1-en for vout1 ON/OFF + state control. + maxItems: 1 + + rohm,ddr-sel-low: + description: + The BD9576 and BD9573 output voltage for DDR can be selected by setting + the ddr-sel pin low or high. Set this property if ddr-sel is grounded. + type: boolean + + rohm,watchdog-enable-gpios: + description: The GPIO line used to enable the watchdog. + maxItems: 1 + + rohm,watchdog-ping-gpios: + description: The GPIO line used to ping the watchdog. + maxItems: 1 + + rohm,hw-timeout-ms: + maxItems: 2 + description: + Watchog timeout in milliseconds. If single value is given it is + the maximum timeout. Eg. if pinging watchdog is not done within this time + limit the watchdog will be triggered. If two values are given watchdog + is configured in "window mode". Then first value is limit for short-ping + Eg. if watchdog is pinged sooner than that the watchdog will trigger. + When two values is given the second value is the maximum timeout. + # (HW) minimum for short timeout is 2ms, maximum 220 ms. + # (HW) minimum for max timeout is 4ms, maximum 4416 ms. + + regulators: + $ref: ../regulator/rohm,bd9576-regulator.yaml + description: + List of child nodes that specify the regulators. + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/leds/common.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic: pmic@30 { + compatible = "rohm,bd9576"; + reg = <0x30>; + rohm,vout1-en-low; + rohm,vout1-en-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; + rohm,ddr-sel-low; + rohm,watchdog-enable-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; + rohm,watchdog-ping-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>; + rohm,hw-timeout-ms = <150>, <2300>; + + regulators { + boost1: regulator-vd50 { + regulator-name = "VD50"; + }; + buck1: regulator-vd18 { + regulator-name = "VD18"; + }; + buck2: regulator-vdddr { + regulator-name = "VDDDR"; + }; + buck3: regulator-vd10 { + regulator-name = "VD10"; + }; + ldo: regulator-voutl1 { + regulator-name = "VOUTL1"; + }; + sw: regulator-vouts1 { + regulator-name = "VOUTS1"; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml b/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml index c4fc5345d38d..f6cac4b1079c 100644 --- a/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml +++ b/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml @@ -17,6 +17,10 @@ properties: description: I2C slave address const: 0x60 + reset-gpios: + description: GPIO connected to NRST pin (active low reset, pin 20) + maxItems: 1 + gpio-controller: true '#gpio-cells': diff --git a/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml b/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml index a7e57c0913e1..dc5a29b5ef7d 100644 --- a/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml +++ b/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml @@ -17,6 +17,10 @@ properties: description: I2C slave address const: 0x60 + reset-gpios: + description: GPIO connected to NRST pin (active low reset, pin 20) + maxItems: 1 + gpio-controller: true '#gpio-cells': diff --git a/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml b/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml index 1da6d6a958c9..48d4d53c25f9 100644 --- a/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml +++ b/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml @@ -19,6 +19,10 @@ properties: description: I2C slave address const: 0x60 + reset-gpios: + description: GPIO connected to NRST pin (active low reset, pin 20) + maxItems: 1 + gpio-controller: true '#gpio-cells': diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml new file mode 100644 index 000000000000..7d0adb74a396 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/rohm,bd71815-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD71815 Power Management Integrated Circuit regulators + +maintainers: + - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> + +description: | + This module is part of the ROHM BD718215 MFD device. For more details + see Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml. + + The regulator controller is represented as a sub-node of the PMIC node + on the device tree. + + The valid names for BD71815 regulator nodes are + buck1, buck2, buck3, buck4, buck5, + ldo1, ldo2, ldo3, ldo4, ldo5, + ldodvref, ldolpsr, wled + +properties: + wled: + type: object + description: + properties for wled regulator + $ref: regulator.yaml# + + properties: + regulator-name: + const: wled + +patternProperties: + "^((ldo|buck)[1-5]|ldolpsr|ldodvref)$": + type: object + description: + Properties for single LDO/BUCK regulator. + $ref: regulator.yaml# + + properties: + regulator-name: + pattern: "^((ldo|buck)[1-5]|ldolpsr|ldodvref)$" + description: + should be "ldo1", ..., "ldo5", "buck1", ..., "buck5" and "ldolpsr" + for ldolpsr regulator, "ldodvref" for ldodvref reglator. + + rohm,vsel-gpios: + description: + GPIO used to control ldo4 state (when ldo4 is controlled by GPIO). + + rohm,dvs-run-voltage: + description: + PMIC "RUN" state voltage in uV when PMIC HW states are used. See + comments below for bucks/LDOs which support this. 0 means + regulator should be disabled at RUN state. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3300000 + + rohm,dvs-snvs-voltage: + description: + Whether to keep regulator enabled at "SNVS" state or not. + 0 means regulator should be disabled at SNVS state, non zero voltage + keeps regulator enabled. BD71815 does not change voltage level + when PMIC transitions to SNVS.SNVS voltage depends on the previous + state (from which the PMIC transitioned to SNVS). + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3300000 + + rohm,dvs-suspend-voltage: + description: + PMIC "SUSPEND" state voltage in uV when PMIC HW states are used. See + comments below for bucks/LDOs which support this. 0 means + regulator should be disabled at SUSPEND state. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3300000 + + rohm,dvs-lpsr-voltage: + description: + PMIC "LPSR" state voltage in uV when PMIC HW states are used. See + comments below for bucks/LDOs which support this. 0 means + regulator should be disabled at LPSR state. + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 3300000 + + # Bucks 1 and 2 support giving separate voltages for operational states + # (RUN /CLEAN according to data-sheet) and non operational states + # (LPSR/SUSPEND). The voltage is automatically changed when HW + # state changes. Omitting these properties from bucks 1 and 2 leave + # buck voltages to not be toggled by HW state. Enable status may still + # be toggled by state changes depending on HW default settings. + # + # Bucks 3-5 and ldos 1-5 support setting the RUN state voltage here. + # Given RUN voltage is used at all states if regulator is enabled at + # given state. + # Values given for other states are regarded as enable/disable at + # given state (see below). + # + # All regulators except WLED support specifying enable/disable status + # for each of the HW states (RUN/SNVS/SUSPEND/LPSR). HW defaults can + # be overridden by setting voltage to 0 (regulator disabled at given + # state) or non-zero (regulator enabled at given state). Please note + # that setting non zero voltages for bucks 1/2 will also enable voltage + # changes according to state change. + + required: + - regulator-name + + unevaluatedProperties: false + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index b0b83635e0b5..99a72a480d32 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -772,6 +772,8 @@ patternProperties: description: Broadcom Corporation (formerly NetLogic Microsystems) "^netron-dy,.*": description: Netron DY + "^netronix,.*": + description: Netronix, Inc. "^netxeon,.*": description: Shenzhen Netxeon Technology CO., LTD "^neweast,.*": diff --git a/MAINTAINERS b/MAINTAINERS index a938f79695a5..bccfb16e3d98 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2894,6 +2894,18 @@ W: http://www.openaoe.org/ F: Documentation/admin-guide/aoe/ F: drivers/block/aoe/ +ATC260X PMIC MFD DRIVER +M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> +M: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> +L: linux-actions@lists.infradead.org +S: Maintained +F: Documentation/devicetree/bindings/mfd/actions,atc260x.yaml +F: drivers/input/misc/atc260x-onkey.c +F: drivers/mfd/atc260* +F: drivers/power/reset/atc260x-poweroff.c +F: drivers/regulator/atc260x-regulator.c +F: include/linux/mfd/atc260x/* + ATHEROS 71XX/9XXX GPIO DRIVER M: Alban Bedel <albeu@free.fr> S: Maintained @@ -9221,6 +9233,26 @@ F: include/linux/mei_cl_bus.h F: include/uapi/linux/mei.h F: samples/mei/* +INTEL MAX 10 BMC MFD DRIVER +M: Xu Yilun <yilun.xu@intel.com> +R: Tom Rix <trix@redhat.com> +S: Maintained +F: Documentation/ABI/testing/sysfs-driver-intel-m10-bmc +F: Documentation/hwmon/intel-m10-bmc-hwmon.rst +F: drivers/hwmon/intel-m10-bmc-hwmon.c +F: drivers/mfd/intel-m10-bmc.c +F: include/linux/mfd/intel-m10-bmc.h + +INTEL MAX 10 BMC MFD DRIVER +M: Xu Yilun <yilun.xu@intel.com> +R: Tom Rix <trix@redhat.com> +S: Maintained +F: Documentation/ABI/testing/sysfs-driver-intel-m10-bmc +F: Documentation/hwmon/intel-m10-bmc-hwmon.rst +F: drivers/hwmon/intel-m10-bmc-hwmon.c +F: drivers/mfd/intel-m10-bmc.c +F: include/linux/mfd/intel-m10-bmc.h + INTEL MENLOW THERMAL DRIVER M: Sujith Thomas <sujith.thomas@intel.com> L: platform-driver-x86@vger.kernel.org @@ -12543,6 +12575,15 @@ F: include/net/netrom.h F: include/uapi/linux/netrom.h F: net/netrom/ +NETRONIX EMBEDDED CONTROLLER +M: Jonathan Neuschäfer <j.neuschaefer@gmx.net> +S: Maintained +F: Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml +F: drivers/mfd/ntxec.c +F: drivers/pwm/pwm-ntxec.c +F: drivers/rtc/rtc-ntxec.c +F: include/linux/mfd/ntxec.h + NETRONOME ETHERNET DRIVERS M: Simon Horman <simon.horman@netronome.com> R: Jakub Kicinski <kuba@kernel.org> @@ -15634,20 +15675,27 @@ F: Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt F: Documentation/devicetree/bindings/regulator/rohm,bd70528-regulator.txt F: drivers/clk/clk-bd718x7.c F: drivers/gpio/gpio-bd70528.c +F: drivers/gpio/gpio-bd71815.c F: drivers/gpio/gpio-bd71828.c F: drivers/mfd/rohm-bd70528.c F: drivers/mfd/rohm-bd71828.c F: drivers/mfd/rohm-bd718x7.c +F: drivers/mfd/rohm-bd9576.c F: drivers/power/supply/bd70528-charger.c F: drivers/regulator/bd70528-regulator.c +F: drivers/regulator/bd71815-regulator.c F: drivers/regulator/bd71828-regulator.c F: drivers/regulator/bd718x7-regulator.c +F: drivers/regulator/bd9576-regulator.c F: drivers/regulator/rohm-regulator.c F: drivers/rtc/rtc-bd70528.c F: drivers/watchdog/bd70528_wdt.c +F: drivers/watchdog/bd9576_wdt.c F: include/linux/mfd/rohm-bd70528.h +F: include/linux/mfd/rohm-bd71815.h F: include/linux/mfd/rohm-bd71828.h F: include/linux/mfd/rohm-bd718x7.h +F: include/linux/mfd/rohm-bd957x.h F: include/linux/mfd/rohm-generic.h F: include/linux/mfd/rohm-shared.h @@ -18147,29 +18195,6 @@ S: Maintained F: sound/soc/codecs/isabelle* F: sound/soc/codecs/lm49453* -TI LP855x BACKLIGHT DRIVER -M: Milo Kim <milo.kim@ti.com> -S: Maintained -F: Documentation/driver-api/backlight/lp855x-driver.rst -F: drivers/video/backlight/lp855x_bl.c -F: include/linux/platform_data/lp855x.h - -TI LP8727 CHARGER DRIVER -M: Milo Kim <milo.kim@ti.com> -S: Maintained -F: drivers/power/supply/lp8727_charger.c -F: include/linux/platform_data/lp8727.h - -TI LP8788 MFD DRIVER -M: Milo Kim <milo.kim@ti.com> -S: Maintained -F: drivers/iio/adc/lp8788_adc.c -F: drivers/leds/leds-lp8788.c -F: drivers/mfd/lp8788*.c -F: drivers/power/supply/lp8788-charger.c -F: drivers/regulator/lp8788-*.c -F: include/linux/mfd/lp8788*.h - TI NETCP ETHERNET DRIVER M: Wingman Kwok <w-kwok2@ti.com> M: Murali Karicheri <m-karicheri2@ti.com> @@ -19587,7 +19612,6 @@ F: Documentation/devicetree/bindings/sound/wlf,arizona.yaml F: Documentation/hwmon/wm83??.rst F: arch/arm/mach-s3c/mach-crag6410* F: drivers/clk/clk-wm83*.c -F: drivers/extcon/extcon-arizona.c F: drivers/gpio/gpio-*wm*.c F: drivers/gpio/gpio-arizona.c F: drivers/hwmon/wm83??-hwmon.c @@ -19611,7 +19635,7 @@ F: include/linux/mfd/wm8400* F: include/linux/regulator/arizona* F: include/linux/wm97xx.h F: include/sound/wm????.h -F: sound/soc/codecs/arizona.? +F: sound/soc/codecs/arizona* F: sound/soc/codecs/cs47l24* F: sound/soc/codecs/wm* diff --git a/drivers/clk/clk-bd718x7.c b/drivers/clk/clk-bd718x7.c index 17d90e09f1c0..d9e70e506d18 100644 --- a/drivers/clk/clk-bd718x7.c +++ b/drivers/clk/clk-bd718x7.c @@ -13,6 +13,8 @@ #include <linux/regmap.h> /* clk control registers */ +/* BD71815 */ +#define BD71815_REG_OUT32K 0x1d /* BD70528 */ #define BD70528_REG_OUT32K 0x2c /* BD71828 */ @@ -118,6 +120,10 @@ static int bd71837_clk_probe(struct platform_device *pdev) c->reg = BD70528_REG_OUT32K; c->mask = CLK_OUT_EN_MASK; break; + case ROHM_CHIP_TYPE_BD71815: + c->reg = BD71815_REG_OUT32K; + c->mask = CLK_OUT_EN_MASK; + break; default: dev_err(&pdev->dev, "Unknown clk chip\n"); return -EINVAL; @@ -146,6 +152,7 @@ static const struct platform_device_id bd718x7_clk_id[] = { { "bd71847-clk", ROHM_CHIP_TYPE_BD71847 }, { "bd70528-clk", ROHM_CHIP_TYPE_BD70528 }, { "bd71828-clk", ROHM_CHIP_TYPE_BD71828 }, + { "bd71815-clk", ROHM_CHIP_TYPE_BD71815 }, { }, }; MODULE_DEVICE_TABLE(platform, bd718x7_clk_id); @@ -161,6 +168,6 @@ static struct platform_driver bd71837_clk = { module_platform_driver(bd71837_clk); MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>"); -MODULE_DESCRIPTION("BD71837/BD71847/BD70528 chip clk driver"); +MODULE_DESCRIPTION("BD718(15/18/28/37/47/50) and BD70528 chip clk driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:bd718xx-clk"); diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig index af58ebca2bf6..e3db936becfd 100644 --- a/drivers/extcon/Kconfig +++ b/drivers/extcon/Kconfig @@ -21,14 +21,6 @@ config EXTCON_ADC_JACK help Say Y here to enable extcon device driver based on ADC values. -config EXTCON_ARIZONA - tristate "Wolfson Arizona EXTCON support" - depends on MFD_ARIZONA && INPUT && SND_SOC - help - Say Y here to enable support for external accessory detection - with Wolfson Arizona devices. These are audio CODECs with - advanced audio accessory detection support. - config EXTCON_AXP288 tristate "X-Power AXP288 EXTCON support" depends on MFD_AXP20X && USB_SUPPORT && X86 && ACPI diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile index fe10a1b7d18b..1b390d934ca9 100644 --- a/drivers/extcon/Makefile +++ b/drivers/extcon/Makefile @@ -6,7 +6,6 @@ obj-$(CONFIG_EXTCON) += extcon-core.o extcon-core-objs += extcon.o devres.o obj-$(CONFIG_EXTCON_ADC_JACK) += extcon-adc-jack.o -obj-$(CONFIG_EXTCON_ARIZONA) += extcon-arizona.o obj-$(CONFIG_EXTCON_AXP288) += extcon-axp288.o obj-$(CONFIG_EXTCON_FSA9480) += extcon-fsa9480.o obj-$(CONFIG_EXTCON_GPIO) += extcon-gpio.o diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index e3607ec4c2e8..d3b3de514f6e 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -1105,6 +1105,16 @@ config GPIO_BD70528 This driver can also be built as a module. If so, the module will be called gpio-bd70528. +config GPIO_BD71815 + tristate "ROHM BD71815 PMIC GPIO support" + depends on MFD_ROHM_BD71828 + help + Support for GPO(s) on ROHM BD71815 PMIC. There are two GPOs + available on the ROHM PMIC. + + This driver can also be built as a module. If so, the module + will be called gpio-bd71815. + config GPIO_BD71828 tristate "ROHM BD71828 GPIO support" depends on MFD_ROHM_BD71828 diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index c58a90a3c3b1..4c12f31db31f 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -39,6 +39,7 @@ obj-$(CONFIG_GPIO_ATH79) += gpio-ath79.o obj-$(CONFIG_GPIO_BCM_KONA) += gpio-bcm-kona.o obj-$(CONFIG_GPIO_BCM_XGS_IPROC) += gpio-xgs-iproc.o obj-$(CONFIG_GPIO_BD70528) += gpio-bd70528.o +obj-$(CONFIG_GPIO_BD71815) += gpio-bd71815.o obj-$(CONFIG_GPIO_BD71828) += gpio-bd71828.o obj-$(CONFIG_GPIO_BD9571MWV) += gpio-bd9571mwv.o obj-$(CONFIG_GPIO_BRCMSTB) += gpio-brcmstb.o diff --git a/drivers/gpio/gpio-bd71815.c b/drivers/gpio/gpio-bd71815.c new file mode 100644 index 000000000000..08ff2857256f --- /dev/null +++ b/drivers/gpio/gpio-bd71815.c @@ -0,0 +1,185 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Support to GPOs on ROHM BD71815 + * Copyright 2021 ROHM Semiconductors. + * Author: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> + * + * Copyright 2014 Embest Technology Co. Ltd. Inc. + * Author: yanglsh@embest-tech.com + */ + +#include <linux/gpio/driver.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +/* For the BD71815 register definitions */ +#include <linux/mfd/rohm-bd71815.h> + +struct bd71815_gpio { + /* chip.parent points the MFD which provides DT node and regmap */ + struct gpio_chip chip; + /* dev points to the platform device for devm and prints */ + struct device *dev; + struct regmap *regmap; +}; + +static int bd71815gpo_get(struct gpio_chip *chip, unsigned int offset) +{ + struct bd71815_gpio *bd71815 = gpiochip_get_data(chip); + int ret, val; + + ret = regmap_read(bd71815->regmap, BD71815_REG_GPO, &val); + if (ret) + return ret; + + return (val >> offset) & 1; +} + +static void bd71815gpo_set(struct gpio_chip *chip, unsigned int offset, + int value) +{ + struct bd71815_gpio *bd71815 = gpiochip_get_data(chip); + int ret, bit; + + bit = BIT(offset); + + if (value) + ret = regmap_set_bits(bd71815->regmap, BD71815_REG_GPO, bit); + else + ret = regmap_clear_bits(bd71815->regmap, BD71815_REG_GPO, bit); + + if (ret) + dev_warn(bd71815->dev, "failed to toggle GPO\n"); +} + +static int bd71815_gpio_set_config(struct gpio_chip *chip, unsigned int offset, + unsigned long config) +{ + struct bd71815_gpio *bdgpio = gpiochip_get_data(chip); + + switch (pinconf_to_config_param(config)) { + case PIN_CONFIG_DRIVE_OPEN_DRAIN: + return regmap_update_bits(bdgpio->regmap, + BD71815_REG_GPO, + BD71815_GPIO_DRIVE_MASK << offset, + BD71815_GPIO_OPEN_DRAIN << offset); + case PIN_CONFIG_DRIVE_PUSH_PULL: + return regmap_update_bits(bdgpio->regmap, + BD71815_REG_GPO, + BD71815_GPIO_DRIVE_MASK << offset, + BD71815_GPIO_CMOS << offset); + default: + break; + } + return -ENOTSUPP; +} + +/* BD71815 GPIO is actually GPO */ +static int bd71815gpo_direction_get(struct gpio_chip *gc, unsigned int offset) +{ + return GPIO_LINE_DIRECTION_OUT; +} + +/* Template for GPIO chip */ +static const struct gpio_chip bd71815gpo_chip = { + .label = "bd71815", + .owner = THIS_MODULE, + .get = bd71815gpo_get, + .get_direction = bd71815gpo_direction_get, + .set = bd71815gpo_set, + .set_config = bd71815_gpio_set_config, + .can_sleep = true, +}; + +#define BD71815_TWO_GPIOS GENMASK(1, 0) +#define BD71815_ONE_GPIO BIT(0) + +/* + * Sigh. The BD71815 and BD71817 were originally designed to support two GPO + * pins. At some point it was noticed the second GPO pin which is the E5 pin + * located at the center of IC is hard to use on PCB (due to the location). It + * was decided to not promote this second GPO and the pin is marked as GND in + * the datasheet. The functionality is still there though! I guess driving a GPO + * connected to the ground is a bad idea. Thus we do not support it by default. + * OTOH - the original driver written by colleagues at Embest did support + * controlling this second GPO. It is thus possible this is used in some of the + * products. + * + * This driver does not by default support configuring this second GPO + * but allows using it by providing the DT property + * "rohm,enable-hidden-gpo". + */ +static int bd71815_init_valid_mask(struct gpio_chip *gc, + unsigned long *valid_mask, + unsigned int ngpios) +{ + if (ngpios != 2) + return 0; + + if (gc->parent && device_property_present(gc->parent, + "rohm,enable-hidden-gpo")) + *valid_mask = BD71815_TWO_GPIOS; + else + *valid_mask = BD71815_ONE_GPIO; + + return 0; +} + +static int gpo_bd71815_probe(struct platform_device *pdev) +{ + struct bd71815_gpio *g; + struct device *parent, *dev; + + /* + * Bind devm lifetime to this platform device => use dev for devm. + * also the prints should originate from this device. + */ + dev = &pdev->dev; + /* The device-tree and regmap come from MFD => use parent for that */ + parent = dev->parent; + + g = devm_kzalloc(dev, sizeof(*g), GFP_KERNEL); + if (!g) + return -ENOMEM; + + g->chip = bd71815gpo_chip; + + /* + * FIXME: As writing of this the sysfs interface for GPIO control does + * not respect the valid_mask. Do not trust it but rather set the ngpios + * to 1 if "rohm,enable-hidden-gpo" is not given. + * + * This check can be removed later if the sysfs export is fixed and + * if the fix is backported. + * + * For now it is safest to just set the ngpios though. + */ + if (device_property_present(parent, "rohm,enable-hidden-gpo")) + g->chip.ngpio = 2; + else + g->chip.ngpio = 1; + + g->chip.init_valid_mask = bd71815_init_valid_mask; + g->chip.base = -1; + g->chip.parent = parent; + g->regmap = dev_get_regmap(parent, NULL); + g->dev = dev; + + return devm_gpiochip_add_data(dev, &g->chip, g); +} + +static struct platform_driver gpo_bd71815_driver = { + .driver = { + .name = "bd71815-gpo", + }, + .probe = gpo_bd71815_probe, +}; +module_platform_driver(gpo_bd71815_driver); + +MODULE_ALIAS("platform:bd71815-gpo"); +MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>"); +MODULE_AUTHOR("Peter Yang <yanglsh@embest-tech.com>"); +MODULE_DESCRIPTION("GPO interface for BD71815"); +MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 0dfeb2d11603..4b37f28ec0c6 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -22,7 +22,6 @@ #include <linux/mfd/syscon.h> #include <linux/module.h> #include <linux/of.h> -#include <linux/platform_data/i2c-designware.h> #include <linux/platform_device.h> #include <linux/pm.h> #include <linux/pm_runtime.h> @@ -206,7 +205,6 @@ static const struct dmi_system_id dw_i2c_hwmon_class_dmi[] = { static int dw_i2c_plat_probe(struct platform_device *pdev) { - struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev); struct i2c_adapter *adap; struct dw_i2c_dev *dev; struct i2c_timings *t; @@ -236,10 +234,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) reset_control_deassert(dev->rst); t = &dev->timings; - if (pdata) - t->bus_freq_hz = pdata->i2c_scl_freq; - else - i2c_parse_fw_timings(&pdev->dev, t, false); + i2c_parse_fw_timings(&pdev->dev, t, false); i2c_dw_adjust_bus_speed(dev); diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index ad1b6c90bc4d..7237dc440b98 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -94,6 +94,17 @@ config INPUT_ARIZONA_HAPTICS To compile this driver as a module, choose M here: the module will be called arizona-haptics. +config INPUT_ATC260X_ONKEY + tristate "Actions Semi ATC260x PMIC ONKEY" + depends on MFD_ATC260X + help + Support the ONKEY of ATC260x PMICs as an input device reporting + power button status. ONKEY can be used to wakeup from low power + modes and force a reset on long press. + + To compile this driver as a module, choose M here: the + module will be called atc260x-onkey. + config INPUT_ATMEL_CAPTOUCH tristate "Atmel Capacitive Touch Button Driver" depends on OF || COMPILE_TEST diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 7f202ba8f775..46db664a8bc4 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_INPUT_ADXL34X_SPI) += adxl34x-spi.o obj-$(CONFIG_INPUT_APANEL) += apanel.o obj-$(CONFIG_INPUT_ARIEL_PWRBUTTON) += ariel-pwrbutton.o obj-$(CONFIG_INPUT_ARIZONA_HAPTICS) += arizona-haptics.o +obj-$(CONFIG_INPUT_ATC260X_ONKEY) += atc260x-onkey.o obj-$(CONFIG_INPUT_ATI_REMOTE2) += ati_remote2.o obj-$(CONFIG_INPUT_ATLAS_BTNS) += atlas_btns.o obj-$(CONFIG_INPUT_ATMEL_CAPTOUCH) += atmel_captouch.o @@ -86,4 +87,3 @@ obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o obj-$(CONFIG_INPUT_XEN_KBDDEV_FRONTEND) += xen-kbdfront.o obj-$(CONFIG_INPUT_YEALINK) += yealink.o obj-$(CONFIG_INPUT_IDEAPAD_SLIDEBAR) += ideapad_slidebar.o - diff --git a/drivers/input/misc/atc260x-onkey.c b/drivers/input/misc/atc260x-onkey.c new file mode 100644 index 000000000000..999aabf9dcbd --- /dev/null +++ b/drivers/input/misc/atc260x-onkey.c @@ -0,0 +1,305 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Onkey driver for Actions Semi ATC260x PMICs. + * + * Copyright (c) 2020 Cristian Ciocaltea <cristian.ciocaltea@gmail.com> + */ + +#include <linux/bitfield.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/mfd/atc260x/core.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +/* <2s for short press, >2s for long press */ +#define KEY_PRESS_TIME_SEC 2 + +/* Driver internals */ +enum atc260x_onkey_reset_status { + KEY_RESET_HW_DEFAULT, + KEY_RESET_DISABLED, + KEY_RESET_USER_SEL, +}; + +struct atc260x_onkey_params { + u32 reg_int_ctl; + u32 kdwn_state_bm; + u32 long_int_pnd_bm; + u32 short_int_pnd_bm; + u32 kdwn_int_pnd_bm; + u32 press_int_en_bm; + u32 kdwn_int_en_bm; + u32 press_time_bm; + u32 reset_en_bm; + u32 reset_time_bm; +}; + +struct atc260x_onkey { + struct atc260x *atc260x; + const struct atc260x_onkey_params *params; + struct input_dev *input_dev; + struct delayed_work work; + int irq; +}; + +static const struct atc260x_onkey_params atc2603c_onkey_params = { + .reg_int_ctl = ATC2603C_PMU_SYS_CTL2, + .long_int_pnd_bm = ATC2603C_PMU_SYS_CTL2_ONOFF_LONG_PRESS, + .short_int_pnd_bm = ATC2603C_PMU_SYS_CTL2_ONOFF_SHORT_PRESS, + .kdwn_int_pnd_bm = ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS_PD, + .press_int_en_bm = ATC2603C_PMU_SYS_CTL2_ONOFF_INT_EN, + .kdwn_int_en_bm = ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS_INT_EN, + .kdwn_state_bm = ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS, + .press_time_bm = ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS_TIME, + .reset_en_bm = ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS_RESET_EN, + .reset_time_bm = ATC2603C_PMU_SYS_CTL2_ONOFF_RESET_TIME_SEL, +}; + +static const struct atc260x_onkey_params atc2609a_onkey_params = { + .reg_int_ctl = ATC2609A_PMU_SYS_CTL2, + .long_int_pnd_bm = ATC2609A_PMU_SYS_CTL2_ONOFF_LONG_PRESS, + .short_int_pnd_bm = ATC2609A_PMU_SYS_CTL2_ONOFF_SHORT_PRESS, + .kdwn_int_pnd_bm = ATC2609A_PMU_SYS_CTL2_ONOFF_PRESS_PD, + .press_int_en_bm = ATC2609A_PMU_SYS_CTL2_ONOFF_LSP_INT_EN, + .kdwn_int_en_bm = ATC2609A_PMU_SYS_CTL2_ONOFF_PRESS_INT_EN, + .kdwn_state_bm = ATC2609A_PMU_SYS_CTL2_ONOFF_PRESS, + .press_time_bm = ATC2609A_PMU_SYS_CTL2_ONOFF_PRESS_TIME, + .reset_en_bm = ATC2609A_PMU_SYS_CTL2_ONOFF_RESET_EN, + .reset_time_bm = ATC2609A_PMU_SYS_CTL2_ONOFF_RESET_TIME_SEL, +}; + +static int atc2603x_onkey_hw_init(struct atc260x_onkey *onkey, + enum atc260x_onkey_reset_status reset_status, + u32 reset_time, u32 press_time) +{ + u32 reg_bm, reg_val; + + reg_bm = onkey->params->long_int_pnd_bm | + onkey->params->short_int_pnd_bm | + onkey->params->kdwn_int_pnd_bm | + onkey->params->press_int_en_bm | + onkey->params->kdwn_int_en_bm; + + reg_val = reg_bm | press_time; + reg_bm |= onkey->params->press_time_bm; + + if (reset_status == KEY_RESET_DISABLED) { + reg_bm |= onkey->params->reset_en_bm; + } else if (reset_status == KEY_RESET_USER_SEL) { + reg_bm |= onkey->params->reset_en_bm | + onkey->params->reset_time_bm; + reg_val |= onkey->params->reset_en_bm | reset_time; + } + + return regmap_update_bits(onkey->atc260x->regmap, + onkey->params->reg_int_ctl, reg_bm, reg_val); +} + +static void atc260x_onkey_query(struct atc260x_onkey *onkey) +{ + u32 reg_bits; + int ret, key_down; + + ret = regmap_read(onkey->atc260x->regmap, + onkey->params->reg_int_ctl, &key_down); + if (ret) { + key_down = 1; + dev_err(onkey->atc260x->dev, + "Failed to read onkey status: %d\n", ret); + } else { + key_down &= onkey->params->kdwn_state_bm; + } + + /* + * The hardware generates interrupt only when the onkey pin is + * asserted. Hence, the deassertion of the pin is simulated through + * work queue. + */ + if (key_down) { + schedule_delayed_work(&onkey->work, msecs_to_jiffies(200)); + return; + } + + /* + * The key-down status bit is cleared when the On/Off button + * is released. + */ + input_report_key(onkey->input_dev, KEY_POWER, 0); + input_sync(onkey->input_dev); + + reg_bits = onkey->params->long_int_pnd_bm | + onkey->params->short_int_pnd_bm | + onkey->params->kdwn_int_pnd_bm | + onkey->params->press_int_en_bm | + onkey->params->kdwn_int_en_bm; + + /* Clear key press pending events and enable key press interrupts. */ + regmap_update_bits(onkey->atc260x->regmap, onkey->params->reg_int_ctl, + reg_bits, reg_bits); +} + +static void atc260x_onkey_work(struct work_struct *work) +{ + struct atc260x_onkey *onkey = container_of(work, struct atc260x_onkey, + work.work); + atc260x_onkey_query(onkey); +} + +static irqreturn_t atc260x_onkey_irq(int irq, void *data) +{ + struct atc260x_onkey *onkey = data; + int ret; + + /* Disable key press interrupts. */ + ret = regmap_update_bits(onkey->atc260x->regmap, + onkey->params->reg_int_ctl, + onkey->params->press_int_en_bm | + onkey->params->kdwn_int_en_bm, 0); + if (ret) + dev_err(onkey->atc260x->dev, + "Failed to disable interrupts: %d\n", ret); + + input_report_key(onkey->input_dev, KEY_POWER, 1); + input_sync(onkey->input_dev); + + atc260x_onkey_query(onkey); + + return IRQ_HANDLED; +} + +static int atc260x_onkey_open(struct input_dev *dev) +{ + struct atc260x_onkey *onkey = input_get_drvdata(dev); + + enable_irq(onkey->irq); + + return 0; +} + +static void atc260x_onkey_close(struct input_dev *dev) +{ + struct atc260x_onkey *onkey = input_get_drvdata(dev); + + disable_irq(onkey->irq); + cancel_delayed_work_sync(&onkey->work); +} + +static int atc260x_onkey_probe(struct platform_device *pdev) +{ + struct atc260x *atc260x = dev_get_drvdata(pdev->dev.parent); + struct atc260x_onkey *onkey; + struct input_dev *input_dev; + enum atc260x_onkey_reset_status reset_status; + u32 press_time = KEY_PRESS_TIME_SEC, reset_time = 0; + int val, error; + + onkey = devm_kzalloc(&pdev->dev, sizeof(*onkey), GFP_KERNEL); + if (!onkey) + return -ENOMEM; + + error = device_property_read_u32(pdev->dev.parent, + "reset-time-sec", &val); + if (error) { + reset_status = KEY_RESET_HW_DEFAULT; + } else if (val) { + if (val < 6 || val > 12) { + dev_err(&pdev->dev, "reset-time-sec out of range\n"); + return -EINVAL; + } + + reset_status = KEY_RESET_USER_SEL; + reset_time = (val - 6) / 2; + } else { + reset_status = KEY_RESET_DISABLED; + dev_dbg(&pdev->dev, "Disabled reset on long-press\n"); + } + + switch (atc260x->ic_type) { + case ATC2603C: + onkey->params = &atc2603c_onkey_params; + press_time = FIELD_PREP(ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS_TIME, + press_time); + reset_time = FIELD_PREP(ATC2603C_PMU_SYS_CTL2_ONOFF_RESET_TIME_SEL, + reset_time); + break; + case ATC2609A: + onkey->params = &atc2609a_onkey_params; + press_time = FIELD_PREP(ATC2609A_PMU_SYS_CTL2_ONOFF_PRESS_TIME, + press_time); + reset_time = FIELD_PREP(ATC2609A_PMU_SYS_CTL2_ONOFF_RESET_TIME_SEL, + reset_time); + break; + default: + dev_err(&pdev->dev, + "OnKey not supported for ATC260x PMIC type: %u\n", + atc260x->ic_type); + return -EINVAL; + } + + input_dev = devm_input_allocate_device(&pdev->dev); + if (!input_dev) { + dev_err(&pdev->dev, "Failed to allocate input device\n"); + return -ENOMEM; + } + + onkey->input_dev = input_dev; + onkey->atc260x = atc260x; + + input_dev->name = "atc260x-onkey"; + input_dev->phys = "atc260x-onkey/input0"; + input_dev->open = atc260x_onkey_open; + input_dev->close = atc260x_onkey_close; + + input_set_capability(input_dev, EV_KEY, KEY_POWER); + input_set_drvdata(input_dev, onkey); + + INIT_DELAYED_WORK(&onkey->work, atc260x_onkey_work); + + onkey->irq = platform_get_irq(pdev, 0); + if (onkey->irq < 0) + return onkey->irq; + + error = devm_request_threaded_irq(&pdev->dev, onkey->irq, NULL, + atc260x_onkey_irq, IRQF_ONESHOT, + dev_name(&pdev->dev), onkey); + if (error) { + dev_err(&pdev->dev, + "Failed to register IRQ %d: %d\n", onkey->irq, error); + return error; + } + + /* Keep IRQ disabled until atc260x_onkey_open() is called. */ + disable_irq(onkey->irq); + + error = input_register_device(input_dev); + if (error) { + dev_err(&pdev->dev, + "Failed to register input device: %d\n", error); + return error; + } + + error = atc2603x_onkey_hw_init(onkey, reset_status, + reset_time, press_time); + if (error) + return error; + + device_init_wakeup(&pdev->dev, true); + + return 0; +} + +static struct platform_driver atc260x_onkey_driver = { + .probe = atc260x_onkey_probe, + .driver = { + .name = "atc260x-onkey", + }, +}; + +module_platform_driver(atc260x_onkey_driver); + +MODULE_DESCRIPTION("Onkey driver for ATC260x PMICs"); +MODULE_AUTHOR("Cristian Ciocaltea <cristian.ciocaltea@gmail.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 2ce9edb90901..5c7f2b100191 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -967,6 +967,17 @@ config MFD_VIPERBOARD You need to select the mfd cell drivers separately. The drivers do not support all features the board exposes. +config MFD_NTXEC + tristate "Netronix embedded controller (EC)" + depends on OF || COMPILE_TEST + depends on I2C + select REGMAP_I2C + select MFD_CORE + help + Say yes here if you want to support the embedded controller found in + certain e-book readers designed by the original design manufacturer + Netronix. + config MFD_RETU tristate "Nokia Retu and Tahvo multi-function device" select MFD_CORE @@ -1224,7 +1235,8 @@ config MFD_SC27XX_PMIC config ABX500_CORE bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions" - default y if ARCH_U300 || ARCH_U8500 || COMPILE_TEST + depends on ARCH_U8500 || COMPILE_TEST + default y if ARCH_U8500 help Say yes here if you have the ABX500 Mixed Signal IC family chips. This core driver expose register access functions. @@ -1232,30 +1244,6 @@ config ABX500_CORE remain unchanged when IC changes. Binding of the functions to actual register access is done by the IC core driver. -config AB3100_CORE - bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions" - depends on I2C=y && ABX500_CORE - select MFD_CORE - default y if ARCH_U300 - help - Select this to enable the AB3100 Mixed Signal IC core - functionality. This connects to a AB3100 on the I2C bus - and expose a number of symbols needed for dependent devices - to read and write registers and subscribe to events from - this multi-functional IC. This is needed to use other features - of the AB3100 such as battery-backed RTC, charging control, - LEDs, vibrator, system power and temperature, power management - and ALSA sound. - -config AB3100_OTP - tristate "ST-Ericsson AB3100 OTP functions" - depends on AB3100_CORE - default y if AB3100_CORE - help - Select this to enable the AB3100 Mixed Signal IC OTP (one-time - programmable memory) support. This exposes a sysfs file to read - out OTP values. - config AB8500_CORE bool "ST-Ericsson AB8500 Mixed Signal Power Management chip" depends on ABX500_CORE && MFD_DB8500_PRCMU @@ -1975,19 +1963,31 @@ config MFD_ROHM_BD70528 charger. config MFD_ROHM_BD71828 - tristate "ROHM BD71828 Power Management IC" + tristate "ROHM BD71828 and BD71815 Power Management IC" depends on I2C=y depends on OF select REGMAP_I2C select REGMAP_IRQ select MFD_CORE help - Select this option to get support for the ROHM BD71828 Power - Management IC. BD71828GW is a single-chip power management IC for - battery-powered portable devices. The IC integrates 7 buck - converters, 7 LDOs, and a 1500 mA single-cell linear charger. - Also included is a Coulomb counter, a real-time clock (RTC), and - a 32.768 kHz clock gate. + Select this option to get support for the ROHM BD71828 and BD71815 + Power Management ICs. BD71828GW and BD71815AGW are single-chip power + management ICs mainly for battery-powered portable devices. + The BD71828 integrates 7 buck converters and 7 LDOs. The BD71815 + has 5 bucks, 7 LDOs, and a boost for driving LEDs. Both ICs provide + also a single-cell linear charger, a Coulomb counter, a real-time + clock (RTC), GPIOs and a 32.768 kHz clock gate. + +config MFD_ROHM_BD957XMUF + tristate "ROHM BD9576MUF and BD9573MUF Power Management ICs" + depends on I2C=y + depends on OF + select REGMAP_I2C + select MFD_CORE + help + Select this option to get support for the ROHM BD9576MUF and + BD9573MUF Power Management ICs. BD9576 and BD9573 are primarily + designed to be used to power R-Car series processors. config MFD_STM32_LPTIMER tristate "Support for STM32 Low-Power Timer" @@ -2055,6 +2055,24 @@ config MFD_WCD934X This driver provides common support WCD934x audio codec and its associated Pin Controller, Soundwire Controller and Audio codec. +config MFD_ATC260X + tristate + select MFD_CORE + select REGMAP + select REGMAP_IRQ + +config MFD_ATC260X_I2C + tristate "Actions Semi ATC260x PMICs with I2C" + select MFD_ATC260X + select REGMAP_I2C + depends on I2C + help + Support for the Actions Semi ATC260x PMICs controlled via I2C. + + This driver provides common support for accessing the ATC2603C + and ATC2609A chip variants, additional drivers must be enabled + in order to use the functionality of the device. + config MFD_KHADAS_MCU tristate "Support for Khadas System control Microcontroller" depends on I2C diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 834f5463af28..4f6d2b8a5f76 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -178,8 +178,6 @@ obj-$(CONFIG_MFD_PCF50633) += pcf50633.o obj-$(CONFIG_PCF50633_ADC) += pcf50633-adc.o obj-$(CONFIG_PCF50633_GPIO) += pcf50633-gpio.o obj-$(CONFIG_ABX500_CORE) += abx500-core.o -obj-$(CONFIG_AB3100_CORE) += ab3100-core.o -obj-$(CONFIG_AB3100_OTP) += ab3100-otp.o obj-$(CONFIG_AB8500_DEBUG) += ab8500-debugfs.o obj-$(CONFIG_MFD_DB8500_PRCMU) += db8500-prcmu.o # ab8500-core need to come after db8500-prcmu (which provides the channel) @@ -218,6 +216,7 @@ obj-$(CONFIG_MFD_INTEL_PMC_BXT) += intel_pmc_bxt.o obj-$(CONFIG_MFD_INTEL_PMT) += intel_pmt.o obj-$(CONFIG_MFD_PALMAS) += palmas.o obj-$(CONFIG_MFD_VIPERBOARD) += viperboard.o +obj-$(CONFIG_MFD_NTXEC) += ntxec.o obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o obj-$(CONFIG_MFD_RK808) += rk808.o obj-$(CONFIG_MFD_RN5T618) += rn5t618.o @@ -261,6 +260,7 @@ obj-$(CONFIG_RAVE_SP_CORE) += rave-sp.o obj-$(CONFIG_MFD_ROHM_BD70528) += rohm-bd70528.o obj-$(CONFIG_MFD_ROHM_BD71828) += rohm-bd71828.o obj-$(CONFIG_MFD_ROHM_BD718XX) += rohm-bd718x7.o +obj-$(CONFIG_MFD_ROHM_BD957XMUF) += rohm-bd9576.o obj-$(CONFIG_MFD_STMFX) += stmfx.o obj-$(CONFIG_MFD_KHADAS_MCU) += khadas-mcu.o obj-$(CONFIG_MFD_ACER_A500_EC) += acer-ec-a500.o @@ -268,3 +268,6 @@ obj-$(CONFIG_MFD_ACER_A500_EC) += acer-ec-a500.o obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o obj-$(CONFIG_MFD_SIMPLE_MFD_I2C) += simple-mfd-i2c.o obj-$(CONFIG_MFD_INTEL_M10_BMC) += intel-m10-bmc.o + +obj-$(CONFIG_MFD_ATC260X) += atc260x-core.o +obj-$(CONFIG_MFD_ATC260X_I2C) += atc260x-i2c.o diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c deleted file mode 100644 index ee71ae04b5e6..000000000000 --- a/drivers/mfd/ab3100-core.c +++ /dev/null @@ -1,929 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2007-2010 ST-Ericsson - * Low-level core for exclusive access to the AB3100 IC on the I2C bus - * and some basic chip-configuration. - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ - -#include <linux/i2c.h> -#include <linux/mutex.h> -#include <linux/list.h> -#include <linux/notifier.h> -#include <linux/slab.h> -#include <linux/err.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/device.h> -#include <linux/interrupt.h> -#include <linux/random.h> -#include <linux/debugfs.h> -#include <linux/seq_file.h> -#include <linux/uaccess.h> -#include <linux/mfd/core.h> -#include <linux/mfd/ab3100.h> -#include <linux/mfd/abx500.h> - -/* These are the only registers inside AB3100 used in this main file */ - -/* Interrupt event registers */ -#define AB3100_EVENTA1 0x21 -#define AB3100_EVENTA2 0x22 -#define AB3100_EVENTA3 0x23 - -/* AB3100 DAC converter registers */ -#define AB3100_DIS 0x00 -#define AB3100_D0C 0x01 -#define AB3100_D1C 0x02 -#define AB3100_D2C 0x03 -#define AB3100_D3C 0x04 - -/* Chip ID register */ -#define AB3100_CID 0x20 - -/* AB3100 interrupt registers */ -#define AB3100_IMRA1 0x24 -#define AB3100_IMRA2 0x25 -#define AB3100_IMRA3 0x26 -#define AB3100_IMRB1 0x2B -#define AB3100_IMRB2 0x2C -#define AB3100_IMRB3 0x2D - -/* System Power Monitoring and control registers */ -#define AB3100_MCA 0x2E -#define AB3100_MCB 0x2F - -/* SIM power up */ -#define AB3100_SUP 0x50 - -/* - * I2C communication - * - * The AB3100 is usually assigned address 0x48 (7-bit) - * The chip is defined in the platform i2c_board_data section. - */ -static int ab3100_get_chip_id(struct device *dev) -{ - struct ab3100 *ab3100 = dev_get_drvdata(dev->parent); - - return (int)ab3100->chip_id; -} - -static int ab3100_set_register_interruptible(struct ab3100 *ab3100, - u8 reg, u8 regval) -{ - u8 regandval[2] = {reg, regval}; - int err; - - err = mutex_lock_interruptible(&ab3100->access_mutex); - if (err) - return err; - - /* - * A two-byte write message with the first byte containing the register - * number and the second byte containing the value to be written - * effectively sets a register in the AB3100. - */ - err = i2c_master_send(ab3100->i2c_client, regandval, 2); - if (err < 0) { - dev_err(ab3100->dev, - "write error (write register): %d\n", - err); - } else if (err != 2) { - dev_err(ab3100->dev, - "write error (write register)\n" - " %d bytes transferred (expected 2)\n", - err); - err = -EIO; - } else { - /* All is well */ - err = 0; - } - mutex_unlock(&ab3100->access_mutex); - return err; -} - -static int set_register_interruptible(struct device *dev, - u8 bank, u8 reg, u8 value) -{ - struct ab3100 *ab3100 = dev_get_drvdata(dev->parent); - - return ab3100_set_register_interruptible(ab3100, reg, value); -} - -/* - * The test registers exist at an I2C bus address up one - * from the ordinary base. They are not supposed to be used - * in production code, but sometimes you have to do that - * anyway. It's currently only used from this file so declare - * it static and do not export. - */ -static int ab3100_set_test_register_interruptible(struct ab3100 *ab3100, - u8 reg, u8 regval) -{ - u8 regandval[2] = {reg, regval}; - int err; - - err = mutex_lock_interruptible(&ab3100->access_mutex); - if (err) - return err; - - err = i2c_master_send(ab3100->testreg_client, regandval, 2); - if (err < 0) { - dev_err(ab3100->dev, - "write error (write test register): %d\n", - err); - } else if (err != 2) { - dev_err(ab3100->dev, - "write error (write test register)\n" - " %d bytes transferred (expected 2)\n", - err); - err = -EIO; - } else { - /* All is well */ - err = 0; - } - mutex_unlock(&ab3100->access_mutex); - - return err; -} - -static int ab3100_get_register_interruptible(struct ab3100 *ab3100, - u8 reg, u8 *regval) -{ - int err; - - err = mutex_lock_interruptible(&ab3100->access_mutex); - if (err) - return err; - - /* - * AB3100 require an I2C "stop" command between each message, else - * it will not work. The only way of achieveing this with the - * message transport layer is to send the read and write messages - * separately. - */ - err = i2c_master_send(ab3100->i2c_client, ®, 1); - if (err < 0) { - dev_err(ab3100->dev, - "write error (send register address): %d\n", - err); - goto get_reg_out_unlock; - } else if (err != 1) { - dev_err(ab3100->dev, - "write error (send register address)\n" - " %d bytes transferred (expected 1)\n", - err); - err = -EIO; - goto get_reg_out_unlock; - } else { - /* All is well */ - err = 0; - } - - err = i2c_master_recv(ab3100->i2c_client, regval, 1); - if (err < 0) { - dev_err(ab3100->dev, - "write error (read register): %d\n", - err); - goto get_reg_out_unlock; - } else if (err != 1) { - dev_err(ab3100->dev, - "write error (read register)\n" - " %d bytes transferred (expected 1)\n", - err); - err = -EIO; - goto get_reg_out_unlock; - } else { - /* All is well */ - err = 0; - } - - get_reg_out_unlock: - mutex_unlock(&ab3100->access_mutex); - return err; -} - -static int get_register_interruptible(struct device *dev, u8 bank, u8 reg, - u8 *value) -{ - struct ab3100 *ab3100 = dev_get_drvdata(dev->parent); - - return ab3100_get_register_interruptible(ab3100, reg, value); -} - -static int ab3100_get_register_page_interruptible(struct ab3100 *ab3100, - u8 first_reg, u8 *regvals, u8 numregs) -{ - int err; - - if (ab3100->chip_id == 0xa0 || - ab3100->chip_id == 0xa1) - /* These don't support paged reads */ - return -EIO; - - err = mutex_lock_interruptible(&ab3100->access_mutex); - if (err) - return err; - - /* - * Paged read also require an I2C "stop" command. - */ - err = i2c_master_send(ab3100->i2c_client, &first_reg, 1); - if (err < 0) { - dev_err(ab3100->dev, - "write error (send first register address): %d\n", - err); - goto get_reg_page_out_unlock; - } else if (err != 1) { - dev_err(ab3100->dev, - "write error (send first register address)\n" - " %d bytes transferred (expected 1)\n", - err); - err = -EIO; - goto get_reg_page_out_unlock; - } - - err = i2c_master_recv(ab3100->i2c_client, regvals, numregs); - if (err < 0) { - dev_err(ab3100->dev, - "write error (read register page): %d\n", - err); - goto get_reg_page_out_unlock; - } else if (err != numregs) { - dev_err(ab3100->dev, - "write error (read register page)\n" - " %d bytes transferred (expected %d)\n", - err, numregs); - err = -EIO; - goto get_reg_page_out_unlock; - } - - /* All is well */ - err = 0; - - get_reg_page_out_unlock: - mutex_unlock(&ab3100->access_mutex); - return err; -} - -static int get_register_page_interruptible(struct device *dev, u8 bank, - u8 first_reg, u8 *regvals, u8 numregs) -{ - struct ab3100 *ab3100 = dev_get_drvdata(dev->parent); - - return ab3100_get_register_page_interruptible(ab3100, - first_reg, regvals, numregs); -} - -static int ab3100_mask_and_set_register_interruptible(struct ab3100 *ab3100, - u8 reg, u8 andmask, u8 ormask) -{ - u8 regandval[2] = {reg, 0}; - int err; - - err = mutex_lock_interruptible(&ab3100->access_mutex); - if (err) - return err; - - /* First read out the target register */ - err = i2c_master_send(ab3100->i2c_client, ®, 1); - if (err < 0) { - dev_err(ab3100->dev, - "write error (maskset send address): %d\n", - err); - goto get_maskset_unlock; - } else if (err != 1) { - dev_err(ab3100->dev, - "write error (maskset send address)\n" - " %d bytes transferred (expected 1)\n", - err); - err = -EIO; - goto get_maskset_unlock; - } - - err = i2c_master_recv(ab3100->i2c_client, ®andval[1], 1); - if (err < 0) { - dev_err(ab3100->dev, - "write error (maskset read register): %d\n", - err); - goto get_maskset_unlock; - } else if (err != 1) { - dev_err(ab3100->dev, - "write error (maskset read register)\n" - " %d bytes transferred (expected 1)\n", - err); - err = -EIO; - goto get_maskset_unlock; - } - - /* Modify the register */ - regandval[1] &= andmask; - regandval[1] |= ormask; - - /* Write the register */ - err = i2c_master_send(ab3100->i2c_client, regandval, 2); - if (err < 0) { - dev_err(ab3100->dev, - "write error (write register): %d\n", - err); - goto get_maskset_unlock; - } else if (err != 2) { - dev_err(ab3100->dev, - "write error (write register)\n" - " %d bytes transferred (expected 2)\n", - err); - err = -EIO; - goto get_maskset_unlock; - } - - /* All is well */ - err = 0; - - get_maskset_unlock: - mutex_unlock(&ab3100->access_mutex); - return err; -} - -static int mask_and_set_register_interruptible(struct device *dev, u8 bank, - u8 reg, u8 bitmask, u8 bitvalues) -{ - struct ab3100 *ab3100 = dev_get_drvdata(dev->parent); - - return ab3100_mask_and_set_register_interruptible(ab3100, - reg, bitmask, (bitmask & bitvalues)); -} - -/* - * Register a simple callback for handling any AB3100 events. - */ -int ab3100_event_register(struct ab3100 *ab3100, - struct notifier_block *nb) -{ - return blocking_notifier_chain_register(&ab3100->event_subscribers, - nb); -} -EXPORT_SYMBOL(ab3100_event_register); - -/* - * Remove a previously registered callback. - */ -int ab3100_event_unregister(struct ab3100 *ab3100, - struct notifier_block *nb) -{ - return blocking_notifier_chain_unregister(&ab3100->event_subscribers, - nb); -} -EXPORT_SYMBOL(ab3100_event_unregister); - - -static int ab3100_event_registers_startup_state_get(struct device *dev, - u8 *event) -{ - struct ab3100 *ab3100 = dev_get_drvdata(dev->parent); - - if (!ab3100->startup_events_read) - return -EAGAIN; /* Try again later */ - memcpy(event, ab3100->startup_events, 3); - - return 0; -} - -static struct abx500_ops ab3100_ops = { - .get_chip_id = ab3100_get_chip_id, - .set_register = set_register_interruptible, - .get_register = get_register_interruptible, - .get_register_page = get_register_page_interruptible, - .set_register_page = NULL, - .mask_and_set_register = mask_and_set_register_interruptible, - .event_registers_startup_state_get = - ab3100_event_registers_startup_state_get, - .startup_irq_enabled = NULL, -}; - -/* - * This is a threaded interrupt handler so we can make some - * I2C calls etc. - */ -static irqreturn_t ab3100_irq_handler(int irq, void *data) -{ - struct ab3100 *ab3100 = data; - u8 event_regs[3]; - u32 fatevent; - int err; - - err = ab3100_get_register_page_interruptible(ab3100, AB3100_EVENTA1, - event_regs, 3); - if (err) - goto err_event; - - fatevent = (event_regs[0] << 16) | - (event_regs[1] << 8) | - event_regs[2]; - - if (!ab3100->startup_events_read) { - ab3100->startup_events[0] = event_regs[0]; - ab3100->startup_events[1] = event_regs[1]; - ab3100->startup_events[2] = event_regs[2]; - ab3100->startup_events_read = true; - } - /* - * The notified parties will have to mask out the events - * they're interested in and react to them. They will be - * notified on all events, then they use the fatevent value - * to determine if they're interested. - */ - blocking_notifier_call_chain(&ab3100->event_subscribers, - fatevent, NULL); - - dev_dbg(ab3100->dev, - "IRQ Event: 0x%08x\n", fatevent); - - return IRQ_HANDLED; - - err_event: - dev_dbg(ab3100->dev, - "error reading event status\n"); - return IRQ_HANDLED; -} - -#ifdef CONFIG_DEBUG_FS -/* - * Some debugfs entries only exposed if we're using debug - */ -static int ab3100_registers_print(struct seq_file *s, void *p) -{ - struct ab3100 *ab3100 = s->private; - u8 value; - u8 reg; - - seq_puts(s, "AB3100 registers:\n"); - - for (reg = 0; reg < 0xff; reg++) { - ab3100_get_register_interruptible(ab3100, reg, &value); - seq_printf(s, "[0x%x]: 0x%x\n", reg, value); - } - return 0; -} - -static int ab3100_registers_open(struct inode *inode, struct file *file) -{ - return single_open(file, ab3100_registers_print, inode->i_private); -} - -static const struct file_operations ab3100_registers_fops = { - .open = ab3100_registers_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, -}; - -struct ab3100_get_set_reg_priv { - struct ab3100 *ab3100; - bool mode; -}; - -static ssize_t ab3100_get_set_reg(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct ab3100_get_set_reg_priv *priv = file->private_data; - struct ab3100 *ab3100 = priv->ab3100; - char buf[32]; - ssize_t buf_size; - int regp; - u8 user_reg; - int err; - int i = 0; - - /* Get userspace string and assure termination */ - buf_size = min((ssize_t)count, (ssize_t)(sizeof(buf)-1)); - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - buf[buf_size] = 0; - - /* - * The idea is here to parse a string which is either - * "0xnn" for reading a register, or "0xaa 0xbb" for - * writing 0xbb to the register 0xaa. First move past - * whitespace and then begin to parse the register. - */ - while ((i < buf_size) && (buf[i] == ' ')) - i++; - regp = i; - - /* - * Advance pointer to end of string then terminate - * the register string. This is needed to satisfy - * the kstrtou8() function. - */ - while ((i < buf_size) && (buf[i] != ' ')) - i++; - buf[i] = '\0'; - - err = kstrtou8(&buf[regp], 16, &user_reg); - if (err) - return err; - - /* Either we read or we write a register here */ - if (!priv->mode) { - /* Reading */ - u8 regvalue; - - ab3100_get_register_interruptible(ab3100, user_reg, ®value); - - dev_info(ab3100->dev, - "debug read AB3100 reg[0x%02x]: 0x%02x\n", - user_reg, regvalue); - } else { - int valp; - u8 user_value; - u8 regvalue; - - /* - * Writing, we need some value to write to - * the register so keep parsing the string - * from userspace. - */ - i++; - while ((i < buf_size) && (buf[i] == ' ')) - i++; - valp = i; - while ((i < buf_size) && (buf[i] != ' ')) - i++; - buf[i] = '\0'; - - err = kstrtou8(&buf[valp], 16, &user_value); - if (err) - return err; - - ab3100_set_register_interruptible(ab3100, user_reg, user_value); - ab3100_get_register_interruptible(ab3100, user_reg, ®value); - - dev_info(ab3100->dev, - "debug write reg[0x%02x]\n" - " with 0x%02x, after readback: 0x%02x\n", - user_reg, user_value, regvalue); - } - return buf_size; -} - -static const struct file_operations ab3100_get_set_reg_fops = { - .open = simple_open, - .write = ab3100_get_set_reg, - .llseek = noop_llseek, -}; - -static struct ab3100_get_set_reg_priv ab3100_get_priv; -static struct ab3100_get_set_reg_priv ab3100_set_priv; - -static void ab3100_setup_debugfs(struct ab3100 *ab3100) -{ - struct dentry *ab3100_dir; - - ab3100_dir = debugfs_create_dir("ab3100", NULL); - - debugfs_create_file("registers", S_IRUGO, ab3100_dir, ab3100, - &ab3100_registers_fops); - - ab3100_get_priv.ab3100 = ab3100; - ab3100_get_priv.mode = false; - debugfs_create_file("get_reg", S_IWUSR, ab3100_dir, &ab3100_get_priv, - &ab3100_get_set_reg_fops); - - ab3100_set_priv.ab3100 = ab3100; - ab3100_set_priv.mode = true; - debugfs_create_file("set_reg", S_IWUSR, ab3100_dir, &ab3100_set_priv, - &ab3100_get_set_reg_fops); -} -#else -static inline void ab3100_setup_debugfs(struct ab3100 *ab3100) -{ -} -#endif - -/* - * Basic set-up, datastructure creation/destruction and I2C interface. - * This sets up a default config in the AB3100 chip so that it - * will work as expected. - */ - -struct ab3100_init_setting { - u8 abreg; - u8 setting; -}; - -static const struct ab3100_init_setting ab3100_init_settings[] = { - { - .abreg = AB3100_MCA, - .setting = 0x01 - }, { - .abreg = AB3100_MCB, - .setting = 0x30 - }, { - .abreg = AB3100_IMRA1, - .setting = 0x00 - }, { - .abreg = AB3100_IMRA2, - .setting = 0xFF - }, { - .abreg = AB3100_IMRA3, - .setting = 0x01 - }, { - .abreg = AB3100_IMRB1, - .setting = 0xBF - }, { - .abreg = AB3100_IMRB2, - .setting = 0xFF - }, { - .abreg = AB3100_IMRB3, - .setting = 0xFF - }, { - .abreg = AB3100_SUP, - .setting = 0x00 - }, { - .abreg = AB3100_DIS, - .setting = 0xF0 - }, { - .abreg = AB3100_D0C, - .setting = 0x00 - }, { - .abreg = AB3100_D1C, - .setting = 0x00 - }, { - .abreg = AB3100_D2C, - .setting = 0x00 - }, { - .abreg = AB3100_D3C, - .setting = 0x00 - }, -}; - -static int ab3100_setup(struct ab3100 *ab3100) -{ - int err = 0; - int i; - - for (i = 0; i < ARRAY_SIZE(ab3100_init_settings); i++) { - err = ab3100_set_register_interruptible(ab3100, - ab3100_init_settings[i].abreg, - ab3100_init_settings[i].setting); - if (err) - goto exit_no_setup; - } - - /* - * Special trick to make the AB3100 use the 32kHz clock (RTC) - * bit 3 in test register 0x02 is a special, undocumented test - * register bit that only exist in AB3100 P1E - */ - if (ab3100->chip_id == 0xc4) { - dev_warn(ab3100->dev, - "AB3100 P1E variant detected forcing chip to 32KHz\n"); - err = ab3100_set_test_register_interruptible(ab3100, - 0x02, 0x08); - } - - exit_no_setup: - return err; -} - -/* The subdevices of the AB3100 */ -static struct mfd_cell ab3100_devs[] = { - { - .name = "ab3100-dac", - .id = -1, - }, - { - .name = "ab3100-leds", - .id = -1, - }, - { - .name = "ab3100-power", - .id = -1, - }, - { - .name = "ab3100-regulators", - .of_compatible = "stericsson,ab3100-regulators", - .id = -1, - }, - { - .name = "ab3100-sim", - .id = -1, - }, - { - .name = "ab3100-uart", - .id = -1, - }, - { - .name = "ab3100-rtc", - .id = -1, - }, - { - .name = "ab3100-charger", - .id = -1, - }, - { - .name = "ab3100-boost", - .id = -1, - }, - { - .name = "ab3100-adc", - .id = -1, - }, - { - .name = "ab3100-fuelgauge", - .id = -1, - }, - { - .name = "ab3100-vibrator", - .id = -1, - }, - { - .name = "ab3100-otp", - .id = -1, - }, - { - .name = "ab3100-codec", - .id = -1, - }, -}; - -struct ab_family_id { - u8 id; - char *name; -}; - -static const struct ab_family_id ids[] = { - /* AB3100 */ - { - .id = 0xc0, - .name = "P1A" - }, { - .id = 0xc1, - .name = "P1B" - }, { - .id = 0xc2, - .name = "P1C" - }, { - .id = 0xc3, - .name = "P1D" - }, { - .id = 0xc4, - .name = "P1E" - }, { - .id = 0xc5, - .name = "P1F/R1A" - }, { - .id = 0xc6, - .name = "P1G/R1A" - }, { - .id = 0xc7, - .name = "P2A/R2A" - }, { - .id = 0xc8, - .name = "P2B/R2B" - }, - /* AB3000 variants, not supported */ - { - .id = 0xa0 - }, { - .id = 0xa1 - }, { - .id = 0xa2 - }, { - .id = 0xa3 - }, { - .id = 0xa4 - }, { - .id = 0xa5 - }, { - .id = 0xa6 - }, { - .id = 0xa7 - }, - /* Terminator */ - { - .id = 0x00, - }, -}; - -static int ab3100_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - struct ab3100 *ab3100; - struct ab3100_platform_data *ab3100_plf_data = - dev_get_platdata(&client->dev); - int err; - int i; - - ab3100 = devm_kzalloc(&client->dev, sizeof(struct ab3100), GFP_KERNEL); - if (!ab3100) - return -ENOMEM; - - /* Initialize data structure */ - mutex_init(&ab3100->access_mutex); - BLOCKING_INIT_NOTIFIER_HEAD(&ab3100->event_subscribers); - - ab3100->i2c_client = client; - ab3100->dev = &ab3100->i2c_client->dev; - - i2c_set_clientdata(client, ab3100); - - /* Read chip ID register */ - err = ab3100_get_register_interruptible(ab3100, AB3100_CID, - &ab3100->chip_id); - if (err) { - dev_err(&client->dev, - "failed to communicate with AB3100 chip\n"); - goto exit_no_detect; - } - - for (i = 0; ids[i].id != 0x0; i++) { - if (ids[i].id == ab3100->chip_id) { - if (ids[i].name) - break; - - dev_err(&client->dev, "AB3000 is not supported\n"); - goto exit_no_detect; - } - } - - snprintf(&ab3100->chip_name[0], - sizeof(ab3100->chip_name) - 1, "AB3100 %s", ids[i].name); - - if (ids[i].id == 0x0) { - dev_err(&client->dev, "unknown analog baseband chip id: 0x%x\n", - ab3100->chip_id); - dev_err(&client->dev, - "accepting it anyway. Please update the driver.\n"); - goto exit_no_detect; - } - - dev_info(&client->dev, "Detected chip: %s\n", - &ab3100->chip_name[0]); - - /* Attach a second dummy i2c_client to the test register address */ - ab3100->testreg_client = i2c_new_dummy_device(client->adapter, - client->addr + 1); - if (IS_ERR(ab3100->testreg_client)) { - err = PTR_ERR(ab3100->testreg_client); - goto exit_no_testreg_client; - } - - err = ab3100_setup(ab3100); - if (err) - goto exit_no_setup; - - err = devm_request_threaded_irq(&client->dev, - client->irq, NULL, ab3100_irq_handler, - IRQF_ONESHOT, "ab3100-core", ab3100); - if (err) - goto exit_no_irq; - - err = abx500_register_ops(&client->dev, &ab3100_ops); - if (err) - goto exit_no_ops; - - /* Set up and register the platform devices. */ - for (i = 0; i < ARRAY_SIZE(ab3100_devs); i++) { - ab3100_devs[i].platform_data = ab3100_plf_data; - ab3100_devs[i].pdata_size = sizeof(struct ab3100_platform_data); - } - - err = mfd_add_devices(&client->dev, 0, ab3100_devs, - ARRAY_SIZE(ab3100_devs), NULL, 0, NULL); - - ab3100_setup_debugfs(ab3100); - - return 0; - - exit_no_ops: - exit_no_irq: - exit_no_setup: - i2c_unregister_device(ab3100->testreg_client); - exit_no_testreg_client: - exit_no_detect: - return err; -} - -static const struct i2c_device_id ab3100_id[] = { - { "ab3100", 0 }, - { } -}; - -static struct i2c_driver ab3100_driver = { - .driver = { - .name = "ab3100", - .suppress_bind_attrs = true, - }, - .id_table = ab3100_id, - .probe = ab3100_probe, -}; - -static int __init ab3100_i2c_init(void) -{ - return i2c_add_driver(&ab3100_driver); -} -subsys_initcall(ab3100_i2c_init); diff --git a/drivers/mfd/ab3100-otp.c b/drivers/mfd/ab3100-otp.c deleted file mode 100644 index c393102e3a39..000000000000 --- a/drivers/mfd/ab3100-otp.c +++ /dev/null @@ -1,240 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * drivers/mfd/ab3100_otp.c - * - * Copyright (C) 2007-2009 ST-Ericsson AB - * Driver to read out OTP from the AB3100 Mixed-signal circuit - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/mfd/abx500.h> -#include <linux/debugfs.h> -#include <linux/seq_file.h> - -/* The OTP registers */ -#define AB3100_OTP0 0xb0 -#define AB3100_OTP1 0xb1 -#define AB3100_OTP2 0xb2 -#define AB3100_OTP3 0xb3 -#define AB3100_OTP4 0xb4 -#define AB3100_OTP5 0xb5 -#define AB3100_OTP6 0xb6 -#define AB3100_OTP7 0xb7 -#define AB3100_OTPP 0xbf - -/** - * struct ab3100_otp - * @dev: containing device - * @locked: whether the OTP is locked, after locking, no more bits - * can be changed but before locking it is still possible - * to change bits from 1->0. - * @freq: clocking frequency for the OTP, this frequency is either - * 32768Hz or 1MHz/30 - * @paf: product activation flag, indicates whether this is a real - * product (paf true) or a lab board etc (paf false) - * @imeich: if this is set it is possible to override the - * IMEI number found in the tac, fac and svn fields with - * (secured) software - * @cid: customer ID - * @tac: type allocation code of the IMEI - * @fac: final assembly code of the IMEI - * @svn: software version number of the IMEI - * @debugfs: a debugfs file used when dumping to file - */ -struct ab3100_otp { - struct device *dev; - bool locked; - u32 freq; - bool paf; - bool imeich; - u16 cid:14; - u32 tac:20; - u8 fac; - u32 svn:20; - struct dentry *debugfs; -}; - -static int __init ab3100_otp_read(struct ab3100_otp *otp) -{ - u8 otpval[8]; - u8 otpp; - int err; - - err = abx500_get_register_interruptible(otp->dev, 0, - AB3100_OTPP, &otpp); - if (err) { - dev_err(otp->dev, "unable to read OTPP register\n"); - return err; - } - - err = abx500_get_register_page_interruptible(otp->dev, 0, - AB3100_OTP0, otpval, 8); - if (err) { - dev_err(otp->dev, "unable to read OTP register page\n"); - return err; - } - - /* Cache OTP properties, they never change by nature */ - otp->locked = (otpp & 0x80); - otp->freq = (otpp & 0x40) ? 32768 : 34100; - otp->paf = (otpval[1] & 0x80); - otp->imeich = (otpval[1] & 0x40); - otp->cid = ((otpval[1] << 8) | otpval[0]) & 0x3fff; - otp->tac = ((otpval[4] & 0x0f) << 16) | (otpval[3] << 8) | otpval[2]; - otp->fac = ((otpval[5] & 0x0f) << 4) | (otpval[4] >> 4); - otp->svn = (otpval[7] << 12) | (otpval[6] << 4) | (otpval[5] >> 4); - return 0; -} - -/* - * This is a simple debugfs human-readable file that dumps out - * the contents of the OTP. - */ -#ifdef CONFIG_DEBUG_FS -static int ab3100_show_otp(struct seq_file *s, void *v) -{ - struct ab3100_otp *otp = s->private; - - seq_printf(s, "OTP is %s\n", otp->locked ? "LOCKED" : "UNLOCKED"); - seq_printf(s, "OTP clock switch startup is %uHz\n", otp->freq); - seq_printf(s, "PAF is %s\n", otp->paf ? "SET" : "NOT SET"); - seq_printf(s, "IMEI is %s\n", otp->imeich ? - "CHANGEABLE" : "NOT CHANGEABLE"); - seq_printf(s, "CID: 0x%04x (decimal: %d)\n", otp->cid, otp->cid); - seq_printf(s, "IMEI: %u-%u-%u\n", otp->tac, otp->fac, otp->svn); - return 0; -} - -static int ab3100_otp_open(struct inode *inode, struct file *file) -{ - return single_open(file, ab3100_show_otp, inode->i_private); -} - -static const struct file_operations ab3100_otp_operations = { - .open = ab3100_otp_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static void __init ab3100_otp_init_debugfs(struct device *dev, - struct ab3100_otp *otp) -{ - otp->debugfs = debugfs_create_file("ab3100_otp", S_IFREG | S_IRUGO, - NULL, otp, &ab3100_otp_operations); -} - -static void __exit ab3100_otp_exit_debugfs(struct ab3100_otp *otp) -{ - debugfs_remove(otp->debugfs); -} -#else -/* Compile this out if debugfs not selected */ -static inline void __init ab3100_otp_init_debugfs(struct device *dev, - struct ab3100_otp *otp) -{ -} - -static inline void __exit ab3100_otp_exit_debugfs(struct ab3100_otp *otp) -{ -} -#endif - -#define SHOW_AB3100_ATTR(name) \ -static ssize_t ab3100_otp_##name##_show(struct device *dev, \ - struct device_attribute *attr, \ - char *buf) \ -{\ - struct ab3100_otp *otp = dev_get_drvdata(dev); \ - return sprintf(buf, "%u\n", otp->name); \ -} - -SHOW_AB3100_ATTR(locked) -SHOW_AB3100_ATTR(freq) -SHOW_AB3100_ATTR(paf) -SHOW_AB3100_ATTR(imeich) -SHOW_AB3100_ATTR(cid) -SHOW_AB3100_ATTR(fac) -SHOW_AB3100_ATTR(tac) -SHOW_AB3100_ATTR(svn) - -static struct device_attribute ab3100_otp_attrs[] = { - __ATTR(locked, S_IRUGO, ab3100_otp_locked_show, NULL), - __ATTR(freq, S_IRUGO, ab3100_otp_freq_show, NULL), - __ATTR(paf, S_IRUGO, ab3100_otp_paf_show, NULL), - __ATTR(imeich, S_IRUGO, ab3100_otp_imeich_show, NULL), - __ATTR(cid, S_IRUGO, ab3100_otp_cid_show, NULL), - __ATTR(fac, S_IRUGO, ab3100_otp_fac_show, NULL), - __ATTR(tac, S_IRUGO, ab3100_otp_tac_show, NULL), - __ATTR(svn, S_IRUGO, ab3100_otp_svn_show, NULL), -}; - -static int __init ab3100_otp_probe(struct platform_device *pdev) -{ - struct ab3100_otp *otp; - int err = 0; - int i; - - otp = devm_kzalloc(&pdev->dev, sizeof(struct ab3100_otp), GFP_KERNEL); - if (!otp) - return -ENOMEM; - - otp->dev = &pdev->dev; - - /* Replace platform data coming in with a local struct */ - platform_set_drvdata(pdev, otp); - - err = ab3100_otp_read(otp); - if (err) - return err; - - dev_info(&pdev->dev, "AB3100 OTP readout registered\n"); - - /* sysfs entries */ - for (i = 0; i < ARRAY_SIZE(ab3100_otp_attrs); i++) { - err = device_create_file(&pdev->dev, - &ab3100_otp_attrs[i]); - if (err) - goto err; - } - - /* debugfs entries */ - ab3100_otp_init_debugfs(&pdev->dev, otp); - - return 0; - -err: - while (--i >= 0) - device_remove_file(&pdev->dev, &ab3100_otp_attrs[i]); - return err; -} - -static int __exit ab3100_otp_remove(struct platform_device *pdev) -{ - struct ab3100_otp *otp = platform_get_drvdata(pdev); - int i; - - for (i = 0; i < ARRAY_SIZE(ab3100_otp_attrs); i++) - device_remove_file(&pdev->dev, - &ab3100_otp_attrs[i]); - ab3100_otp_exit_debugfs(otp); - return 0; -} - -static struct platform_driver ab3100_otp_driver = { - .driver = { - .name = "ab3100-otp", - }, - .remove = __exit_p(ab3100_otp_remove), -}; - -module_platform_driver_probe(ab3100_otp_driver, ab3100_otp_probe); - -MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>"); -MODULE_DESCRIPTION("AB3100 OTP Readout Driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index 22c0e3d87629..c2ba498ad302 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -120,12 +120,6 @@ static DEFINE_SPINLOCK(on_stat_lock); static u8 turn_on_stat_mask = 0xFF; static u8 turn_on_stat_set; -static bool no_bm; /* No battery management */ -/* - * not really modular, but the easiest way to keep compat with existing - * bootargs behaviour is to continue using module_param here. - */ -module_param(no_bm, bool, S_IRUGO); #define AB9540_MODEM_CTRL2_REG 0x23 #define AB9540_MODEM_CTRL2_SWDBBRSTN_BIT BIT(2) @@ -1254,14 +1248,12 @@ static int ab8500_probe(struct platform_device *pdev) if (ret) return ret; - if (!no_bm) { - /* Add battery management devices */ - ret = mfd_add_devices(ab8500->dev, 0, ab8500_bm_devs, - ARRAY_SIZE(ab8500_bm_devs), NULL, - 0, ab8500->domain); - if (ret) - dev_err(ab8500->dev, "error adding bm devices\n"); - } + /* Add battery management devices */ + ret = mfd_add_devices(ab8500->dev, 0, ab8500_bm_devs, + ARRAY_SIZE(ab8500_bm_devs), NULL, + 0, ab8500->domain); + if (ret) + dev_err(ab8500->dev, "error adding bm devices\n"); if (((is_ab8505(ab8500) || is_ab9540(ab8500)) && ab8500->chip_id >= AB8500_CUT2P0) || is_ab8540(ab8500)) diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c index 75f1bc671d59..ce6fe6de34f8 100644 --- a/drivers/mfd/arizona-core.c +++ b/drivers/mfd/arizona-core.c @@ -881,11 +881,6 @@ static const char * const wm5102_supplies[] = { static const struct mfd_cell wm5102_devs[] = { { .name = "arizona-micsupp" }, { .name = "arizona-gpio" }, - { - .name = "arizona-extcon", - .parent_supplies = wm5102_supplies, - .num_parent_supplies = 1, /* We only need MICVDD */ - }, { .name = "arizona-haptics" }, { .name = "arizona-pwm" }, { @@ -898,11 +893,6 @@ static const struct mfd_cell wm5102_devs[] = { static const struct mfd_cell wm5110_devs[] = { { .name = "arizona-micsupp" }, { .name = "arizona-gpio" }, - { - .name = "arizona-extcon", - .parent_supplies = wm5102_supplies, - .num_parent_supplies = 1, /* We only need MICVDD */ - }, { .name = "arizona-haptics" }, { .name = "arizona-pwm" }, { @@ -939,11 +929,6 @@ static const char * const wm8997_supplies[] = { static const struct mfd_cell wm8997_devs[] = { { .name = "arizona-micsupp" }, { .name = "arizona-gpio" }, - { - .name = "arizona-extcon", - .parent_supplies = wm8997_supplies, - .num_parent_supplies = 1, /* We only need MICVDD */ - }, { .name = "arizona-haptics" }, { .name = "arizona-pwm" }, { @@ -956,11 +941,6 @@ static const struct mfd_cell wm8997_devs[] = { static const struct mfd_cell wm8998_devs[] = { { .name = "arizona-micsupp" }, { .name = "arizona-gpio" }, - { - .name = "arizona-extcon", - .parent_supplies = wm5102_supplies, - .num_parent_supplies = 1, /* We only need MICVDD */ - }, { .name = "arizona-haptics" }, { .name = "arizona-pwm" }, { diff --git a/drivers/mfd/arizona-irq.c b/drivers/mfd/arizona-irq.c index 077d9ab112b7..d919ae9691e2 100644 --- a/drivers/mfd/arizona-irq.c +++ b/drivers/mfd/arizona-irq.c @@ -100,7 +100,7 @@ static irqreturn_t arizona_irq_thread(int irq, void *data) unsigned int val; int ret; - ret = pm_runtime_get_sync(arizona->dev); + ret = pm_runtime_resume_and_get(arizona->dev); if (ret < 0) { dev_err(arizona->dev, "Failed to resume device: %d\n", ret); return IRQ_NONE; diff --git a/drivers/mfd/arizona-spi.c b/drivers/mfd/arizona-spi.c index 24a2c75d691a..aa1d6f94ae53 100644 --- a/drivers/mfd/arizona-spi.c +++ b/drivers/mfd/arizona-spi.c @@ -25,8 +25,8 @@ #include "arizona.h" #ifdef CONFIG_ACPI -const struct acpi_gpio_params reset_gpios = { 1, 0, false }; -const struct acpi_gpio_params ldoena_gpios = { 2, 0, false }; +static const struct acpi_gpio_params reset_gpios = { 1, 0, false }; +static const struct acpi_gpio_params ldoena_gpios = { 2, 0, false }; static const struct acpi_gpio_mapping arizona_acpi_gpios[] = { { "reset-gpios", &reset_gpios, 1, }, diff --git a/drivers/mfd/atc260x-core.c b/drivers/mfd/atc260x-core.c new file mode 100644 index 000000000000..7148ff5b05b1 --- /dev/null +++ b/drivers/mfd/atc260x-core.c @@ -0,0 +1,310 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Core support for ATC260x PMICs + * + * Copyright (C) 2019 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + * Copyright (C) 2020 Cristian Ciocaltea <cristian.ciocaltea@gmail.com> + */ + +#include <linux/interrupt.h> +#include <linux/mfd/atc260x/core.h> +#include <linux/mfd/core.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/regmap.h> + +#define ATC260X_CHIP_REV_MAX 31 + +struct atc260x_init_regs { + unsigned int cmu_devrst; + unsigned int cmu_devrst_ints; + unsigned int ints_msk; + unsigned int pad_en; + unsigned int pad_en_extirq; +}; + +static void regmap_lock_mutex(void *__mutex) +{ + struct mutex *mutex = __mutex; + + /* + * Using regmap within an atomic context (e.g. accessing a PMIC when + * powering system down) is normally allowed only if the regmap type + * is MMIO and the regcache type is either REGCACHE_NONE or + * REGCACHE_FLAT. For slow buses like I2C and SPI, the regmap is + * internally protected by a mutex which is acquired non-atomically. + * + * Let's improve this by using a customized locking scheme inspired + * from I2C atomic transfer. See i2c_in_atomic_xfer_mode() for a + * starting point. + */ + if (system_state > SYSTEM_RUNNING && irqs_disabled()) + mutex_trylock(mutex); + else + mutex_lock(mutex); +} + +static void regmap_unlock_mutex(void *__mutex) +{ + struct mutex *mutex = __mutex; + + mutex_unlock(mutex); +} + +static const struct regmap_config atc2603c_regmap_config = { + .reg_bits = 8, + .val_bits = 16, + .max_register = ATC2603C_SADDR, + .cache_type = REGCACHE_NONE, +}; + +static const struct regmap_config atc2609a_regmap_config = { + .reg_bits = 8, + .val_bits = 16, + .max_register = ATC2609A_SADDR, + .cache_type = REGCACHE_NONE, +}; + +static const struct regmap_irq atc2603c_regmap_irqs[] = { + REGMAP_IRQ_REG(ATC2603C_IRQ_AUDIO, 0, ATC2603C_INTS_MSK_AUDIO), + REGMAP_IRQ_REG(ATC2603C_IRQ_OV, 0, ATC2603C_INTS_MSK_OV), + REGMAP_IRQ_REG(ATC2603C_IRQ_OC, 0, ATC2603C_INTS_MSK_OC), + REGMAP_IRQ_REG(ATC2603C_IRQ_OT, 0, ATC2603C_INTS_MSK_OT), + REGMAP_IRQ_REG(ATC2603C_IRQ_UV, 0, ATC2603C_INTS_MSK_UV), + REGMAP_IRQ_REG(ATC2603C_IRQ_ALARM, 0, ATC2603C_INTS_MSK_ALARM), + REGMAP_IRQ_REG(ATC2603C_IRQ_ONOFF, 0, ATC2603C_INTS_MSK_ONOFF), + REGMAP_IRQ_REG(ATC2603C_IRQ_SGPIO, 0, ATC2603C_INTS_MSK_SGPIO), + REGMAP_IRQ_REG(ATC2603C_IRQ_IR, 0, ATC2603C_INTS_MSK_IR), + REGMAP_IRQ_REG(ATC2603C_IRQ_REMCON, 0, ATC2603C_INTS_MSK_REMCON), + REGMAP_IRQ_REG(ATC2603C_IRQ_POWER_IN, 0, ATC2603C_INTS_MSK_POWERIN), +}; + +static const struct regmap_irq atc2609a_regmap_irqs[] = { + REGMAP_IRQ_REG(ATC2609A_IRQ_AUDIO, 0, ATC2609A_INTS_MSK_AUDIO), + REGMAP_IRQ_REG(ATC2609A_IRQ_OV, 0, ATC2609A_INTS_MSK_OV), + REGMAP_IRQ_REG(ATC2609A_IRQ_OC, 0, ATC2609A_INTS_MSK_OC), + REGMAP_IRQ_REG(ATC2609A_IRQ_OT, 0, ATC2609A_INTS_MSK_OT), + REGMAP_IRQ_REG(ATC2609A_IRQ_UV, 0, ATC2609A_INTS_MSK_UV), + REGMAP_IRQ_REG(ATC2609A_IRQ_ALARM, 0, ATC2609A_INTS_MSK_ALARM), + REGMAP_IRQ_REG(ATC2609A_IRQ_ONOFF, 0, ATC2609A_INTS_MSK_ONOFF), + REGMAP_IRQ_REG(ATC2609A_IRQ_WKUP, 0, ATC2609A_INTS_MSK_WKUP), + REGMAP_IRQ_REG(ATC2609A_IRQ_IR, 0, ATC2609A_INTS_MSK_IR), + REGMAP_IRQ_REG(ATC2609A_IRQ_REMCON, 0, ATC2609A_INTS_MSK_REMCON), + REGMAP_IRQ_REG(ATC2609A_IRQ_POWER_IN, 0, ATC2609A_INTS_MSK_POWERIN), +}; + +static const struct regmap_irq_chip atc2603c_regmap_irq_chip = { + .name = "atc2603c", + .irqs = atc2603c_regmap_irqs, + .num_irqs = ARRAY_SIZE(atc2603c_regmap_irqs), + .num_regs = 1, + .status_base = ATC2603C_INTS_PD, + .mask_base = ATC2603C_INTS_MSK, + .mask_invert = true, +}; + +static const struct regmap_irq_chip atc2609a_regmap_irq_chip = { + .name = "atc2609a", + .irqs = atc2609a_regmap_irqs, + .num_irqs = ARRAY_SIZE(atc2609a_regmap_irqs), + .num_regs = 1, + .status_base = ATC2609A_INTS_PD, + .mask_base = ATC2609A_INTS_MSK, + .mask_invert = true, +}; + +static const struct resource atc2603c_onkey_resources[] = { + DEFINE_RES_IRQ(ATC2603C_IRQ_ONOFF), +}; + +static const struct resource atc2609a_onkey_resources[] = { + DEFINE_RES_IRQ(ATC2609A_IRQ_ONOFF), +}; + +static const struct mfd_cell atc2603c_mfd_cells[] = { + { .name = "atc260x-regulator" }, + { .name = "atc260x-pwrc" }, + { + .name = "atc260x-onkey", + .num_resources = ARRAY_SIZE(atc2603c_onkey_resources), + .resources = atc2603c_onkey_resources, + }, +}; + +static const struct mfd_cell atc2609a_mfd_cells[] = { + { .name = "atc260x-regulator" }, + { .name = "atc260x-pwrc" }, + { + .name = "atc260x-onkey", + .num_resources = ARRAY_SIZE(atc2609a_onkey_resources), + .resources = atc2609a_onkey_resources, + }, +}; + +static const struct atc260x_init_regs atc2603c_init_regs = { + .cmu_devrst = ATC2603C_CMU_DEVRST, + .cmu_devrst_ints = ATC2603C_CMU_DEVRST_INTS, + .ints_msk = ATC2603C_INTS_MSK, + .pad_en = ATC2603C_PAD_EN, + .pad_en_extirq = ATC2603C_PAD_EN_EXTIRQ, +}; + +static const struct atc260x_init_regs atc2609a_init_regs = { + .cmu_devrst = ATC2609A_CMU_DEVRST, + .cmu_devrst_ints = ATC2609A_CMU_DEVRST_INTS, + .ints_msk = ATC2609A_INTS_MSK, + .pad_en = ATC2609A_PAD_EN, + .pad_en_extirq = ATC2609A_PAD_EN_EXTIRQ, +}; + +static void atc260x_cmu_reset(struct atc260x *atc260x) +{ + const struct atc260x_init_regs *regs = atc260x->init_regs; + + /* Assert reset */ + regmap_update_bits(atc260x->regmap, regs->cmu_devrst, + regs->cmu_devrst_ints, ~regs->cmu_devrst_ints); + + /* De-assert reset */ + regmap_update_bits(atc260x->regmap, regs->cmu_devrst, + regs->cmu_devrst_ints, regs->cmu_devrst_ints); +} + +static void atc260x_dev_init(struct atc260x *atc260x) +{ + const struct atc260x_init_regs *regs = atc260x->init_regs; + + /* Initialize interrupt block */ + atc260x_cmu_reset(atc260x); + + /* Disable all interrupt sources */ + regmap_write(atc260x->regmap, regs->ints_msk, 0); + + /* Enable EXTIRQ pad */ + regmap_update_bits(atc260x->regmap, regs->pad_en, + regs->pad_en_extirq, regs->pad_en_extirq); +} + +/** + * atc260x_match_device(): Setup ATC260x variant related fields + * + * @atc260x: ATC260x device to setup (.dev field must be set) + * @regmap_cfg: regmap config associated with this ATC260x device + * + * This lets the ATC260x core configure the MFD cells and register maps + * for later use. + */ +int atc260x_match_device(struct atc260x *atc260x, struct regmap_config *regmap_cfg) +{ + struct device *dev = atc260x->dev; + const void *of_data; + + of_data = of_device_get_match_data(dev); + if (!of_data) + return -ENODEV; + + atc260x->ic_type = (unsigned long)of_data; + + switch (atc260x->ic_type) { + case ATC2603C: + *regmap_cfg = atc2603c_regmap_config; + atc260x->regmap_irq_chip = &atc2603c_regmap_irq_chip; + atc260x->cells = atc2603c_mfd_cells; + atc260x->nr_cells = ARRAY_SIZE(atc2603c_mfd_cells); + atc260x->type_name = "atc2603c"; + atc260x->rev_reg = ATC2603C_CHIP_VER; + atc260x->init_regs = &atc2603c_init_regs; + break; + case ATC2609A: + *regmap_cfg = atc2609a_regmap_config; + atc260x->regmap_irq_chip = &atc2609a_regmap_irq_chip; + atc260x->cells = atc2609a_mfd_cells; + atc260x->nr_cells = ARRAY_SIZE(atc2609a_mfd_cells); + atc260x->type_name = "atc2609a"; + atc260x->rev_reg = ATC2609A_CHIP_VER; + atc260x->init_regs = &atc2609a_init_regs; + break; + default: + dev_err(dev, "Unsupported ATC260x device type: %u\n", + atc260x->ic_type); + return -EINVAL; + } + + atc260x->regmap_mutex = devm_kzalloc(dev, sizeof(*atc260x->regmap_mutex), + GFP_KERNEL); + if (!atc260x->regmap_mutex) + return -ENOMEM; + + mutex_init(atc260x->regmap_mutex); + + regmap_cfg->lock = regmap_lock_mutex, + regmap_cfg->unlock = regmap_unlock_mutex, + regmap_cfg->lock_arg = atc260x->regmap_mutex; + + return 0; +} +EXPORT_SYMBOL_GPL(atc260x_match_device); + +/** + * atc260x_device_probe(): Probe a configured ATC260x device + * + * @atc260x: ATC260x device to probe (must be configured) + * + * This function lets the ATC260x core register the ATC260x MFD devices + * and IRQCHIP. The ATC260x device passed in must be fully configured + * with atc260x_match_device, its IRQ set, and regmap created. + */ +int atc260x_device_probe(struct atc260x *atc260x) +{ + struct device *dev = atc260x->dev; + unsigned int chip_rev; + int ret; + + if (!atc260x->irq) { + dev_err(dev, "No interrupt support\n"); + return -EINVAL; + } + + /* Initialize the hardware */ + atc260x_dev_init(atc260x); + + ret = regmap_read(atc260x->regmap, atc260x->rev_reg, &chip_rev); + if (ret) { + dev_err(dev, "Failed to get chip revision\n"); + return ret; + } + + if (chip_rev > ATC260X_CHIP_REV_MAX) { + dev_err(dev, "Unknown chip revision: %u\n", chip_rev); + return -EINVAL; + } + + atc260x->ic_ver = __ffs(chip_rev + 1U); + + dev_info(dev, "Detected chip type %s rev.%c\n", + atc260x->type_name, 'A' + atc260x->ic_ver); + + ret = devm_regmap_add_irq_chip(dev, atc260x->regmap, atc260x->irq, IRQF_ONESHOT, + -1, atc260x->regmap_irq_chip, &atc260x->irq_data); + if (ret) { + dev_err(dev, "Failed to add IRQ chip: %d\n", ret); + return ret; + } + + ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, + atc260x->cells, atc260x->nr_cells, NULL, 0, + regmap_irq_get_domain(atc260x->irq_data)); + if (ret) { + dev_err(dev, "Failed to add child devices: %d\n", ret); + regmap_del_irq_chip(atc260x->irq, atc260x->irq_data); + } + + return ret; +} +EXPORT_SYMBOL_GPL(atc260x_device_probe); + +MODULE_DESCRIPTION("ATC260x PMICs Core support"); +MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>"); +MODULE_AUTHOR("Cristian Ciocaltea <cristian.ciocaltea@gmail.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/atc260x-i2c.c b/drivers/mfd/atc260x-i2c.c new file mode 100644 index 000000000000..5855efd09efc --- /dev/null +++ b/drivers/mfd/atc260x-i2c.c @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * I2C bus interface for ATC260x PMICs + * + * Copyright (C) 2019 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + * Copyright (C) 2020 Cristian Ciocaltea <cristian.ciocaltea@gmail.com> + */ + +#include <linux/i2c.h> +#include <linux/mfd/atc260x/core.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regmap.h> + +static int atc260x_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct atc260x *atc260x; + struct regmap_config regmap_cfg; + int ret; + + atc260x = devm_kzalloc(&client->dev, sizeof(*atc260x), GFP_KERNEL); + if (!atc260x) + return -ENOMEM; + + atc260x->dev = &client->dev; + atc260x->irq = client->irq; + + ret = atc260x_match_device(atc260x, ®map_cfg); + if (ret) + return ret; + + i2c_set_clientdata(client, atc260x); + + atc260x->regmap = devm_regmap_init_i2c(client, ®map_cfg); + if (IS_ERR(atc260x->regmap)) { + ret = PTR_ERR(atc260x->regmap); + dev_err(&client->dev, "failed to init regmap: %d\n", ret); + return ret; + } + + return atc260x_device_probe(atc260x); +} + +static const struct of_device_id atc260x_i2c_of_match[] = { + { .compatible = "actions,atc2603c", .data = (void *)ATC2603C }, + { .compatible = "actions,atc2609a", .data = (void *)ATC2609A }, + { } +}; +MODULE_DEVICE_TABLE(of, atc260x_i2c_of_match); + +static struct i2c_driver atc260x_i2c_driver = { + .driver = { + .name = "atc260x", + .of_match_table = of_match_ptr(atc260x_i2c_of_match), + }, + .probe = atc260x_i2c_probe, +}; +module_i2c_driver(atc260x_i2c_driver); + +MODULE_DESCRIPTION("ATC260x PMICs I2C bus interface"); +MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>"); +MODULE_AUTHOR("Cristian Ciocaltea <cristian.ciocaltea@gmail.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/da9063-i2c.c b/drivers/mfd/da9063-i2c.c index 3781d0bb7786..783a14af18e2 100644 --- a/drivers/mfd/da9063-i2c.c +++ b/drivers/mfd/da9063-i2c.c @@ -442,6 +442,16 @@ static int da9063_i2c_probe(struct i2c_client *i2c, return ret; } + /* If SMBus is not available and only I2C is possible, enter I2C mode */ + if (i2c_check_functionality(i2c->adapter, I2C_FUNC_I2C)) { + ret = regmap_clear_bits(da9063->regmap, DA9063_REG_CONFIG_J, + DA9063_TWOWIRE_TO); + if (ret < 0) { + dev_err(da9063->dev, "Failed to set Two-Wire Bus Mode.\n"); + return -EIO; + } + } + return da9063_device_init(da9063, i2c->irq); } diff --git a/drivers/mfd/ene-kb3930.c b/drivers/mfd/ene-kb3930.c index 83243e668e3f..1b73318d1f1f 100644 --- a/drivers/mfd/ene-kb3930.c +++ b/drivers/mfd/ene-kb3930.c @@ -33,7 +33,7 @@ struct kb3930 { struct gpio_descs *off_gpios; }; -struct kb3930 *kb3930_power_off; +static struct kb3930 *kb3930_power_off; #define EC_GPIO_WAVE 0 #define EC_GPIO_OFF_MODE 1 diff --git a/drivers/mfd/intel-lpss-acpi.c b/drivers/mfd/intel-lpss-acpi.c index c8fe334b5fe8..1f396039d58f 100644 --- a/drivers/mfd/intel-lpss-acpi.c +++ b/drivers/mfd/intel-lpss-acpi.c @@ -22,55 +22,71 @@ static const struct intel_lpss_platform_info spt_info = { .clk_rate = 120000000, }; -static struct property_entry spt_i2c_properties[] = { +static const struct property_entry spt_i2c_properties[] = { PROPERTY_ENTRY_U32("i2c-sda-hold-time-ns", 230), { }, }; +static const struct software_node spt_i2c_node = { + .properties = spt_i2c_properties, +}; + static const struct intel_lpss_platform_info spt_i2c_info = { .clk_rate = 120000000, - .properties = spt_i2c_properties, + .swnode = &spt_i2c_node, }; -static struct property_entry uart_properties[] = { +static const struct property_entry uart_properties[] = { PROPERTY_ENTRY_U32("reg-io-width", 4), PROPERTY_ENTRY_U32("reg-shift", 2), PROPERTY_ENTRY_BOOL("snps,uart-16550-compatible"), { }, }; +static const struct software_node uart_node = { + .properties = uart_properties, +}; + static const struct intel_lpss_platform_info spt_uart_info = { .clk_rate = 120000000, .clk_con_id = "baudclk", - .properties = uart_properties, + .swnode = &uart_node, }; static const struct intel_lpss_platform_info bxt_info = { .clk_rate = 100000000, }; -static struct property_entry bxt_i2c_properties[] = { +static const struct property_entry bxt_i2c_properties[] = { PROPERTY_ENTRY_U32("i2c-sda-hold-time-ns", 42), PROPERTY_ENTRY_U32("i2c-sda-falling-time-ns", 171), PROPERTY_ENTRY_U32("i2c-scl-falling-time-ns", 208), { }, }; +static const struct software_node bxt_i2c_node = { + .properties = bxt_i2c_properties, +}; + static const struct intel_lpss_platform_info bxt_i2c_info = { .clk_rate = 133000000, - .properties = bxt_i2c_properties, + .swnode = &bxt_i2c_node, }; -static struct property_entry apl_i2c_properties[] = { +static const struct property_entry apl_i2c_properties[] = { PROPERTY_ENTRY_U32("i2c-sda-hold-time-ns", 207), PROPERTY_ENTRY_U32("i2c-sda-falling-time-ns", 171), PROPERTY_ENTRY_U32("i2c-scl-falling-time-ns", 208), { }, }; +static const struct software_node apl_i2c_node = { + .properties = apl_i2c_properties, +}; + static const struct intel_lpss_platform_info apl_i2c_info = { .clk_rate = 133000000, - .properties = apl_i2c_properties, + .swnode = &apl_i2c_node, }; static const struct acpi_device_id intel_lpss_acpi_ids[] = { diff --git a/drivers/mfd/intel-lpss-pci.c b/drivers/mfd/intel-lpss-pci.c index 1522c8afc540..79c53617489c 100644 --- a/drivers/mfd/intel-lpss-pci.c +++ b/drivers/mfd/intel-lpss-pci.c @@ -65,27 +65,35 @@ static const struct intel_lpss_platform_info spt_info = { .clk_rate = 120000000, }; -static struct property_entry spt_i2c_properties[] = { +static const struct property_entry spt_i2c_properties[] = { PROPERTY_ENTRY_U32("i2c-sda-hold-time-ns", 230), { }, }; +static const struct software_node spt_i2c_node = { + .properties = spt_i2c_properties, +}; + static const struct intel_lpss_platform_info spt_i2c_info = { .clk_rate = 120000000, - .properties = spt_i2c_properties, + .swnode = &spt_i2c_node, }; -static struct property_entry uart_properties[] = { +static const struct property_entry uart_properties[] = { PROPERTY_ENTRY_U32("reg-io-width", 4), PROPERTY_ENTRY_U32("reg-shift", 2), PROPERTY_ENTRY_BOOL("snps,uart-16550-compatible"), { }, }; +static const struct software_node uart_node = { + .properties = uart_properties, +}; + static const struct intel_lpss_platform_info spt_uart_info = { .clk_rate = 120000000, .clk_con_id = "baudclk", - .properties = uart_properties, + .swnode = &uart_node, }; static const struct intel_lpss_platform_info bxt_info = { @@ -95,53 +103,65 @@ static const struct intel_lpss_platform_info bxt_info = { static const struct intel_lpss_platform_info bxt_uart_info = { .clk_rate = 100000000, .clk_con_id = "baudclk", - .properties = uart_properties, + .swnode = &uart_node, }; -static struct property_entry bxt_i2c_properties[] = { +static const struct property_entry bxt_i2c_properties[] = { PROPERTY_ENTRY_U32("i2c-sda-hold-time-ns", 42), PROPERTY_ENTRY_U32("i2c-sda-falling-time-ns", 171), PROPERTY_ENTRY_U32("i2c-scl-falling-time-ns", 208), { }, }; +static const struct software_node bxt_i2c_node = { + .properties = bxt_i2c_properties, +}; + static const struct intel_lpss_platform_info bxt_i2c_info = { .clk_rate = 133000000, - .properties = bxt_i2c_properties, + .swnode = &bxt_i2c_node, }; -static struct property_entry apl_i2c_properties[] = { +static const struct property_entry apl_i2c_properties[] = { PROPERTY_ENTRY_U32("i2c-sda-hold-time-ns", 207), PROPERTY_ENTRY_U32("i2c-sda-falling-time-ns", 171), PROPERTY_ENTRY_U32("i2c-scl-falling-time-ns", 208), { }, }; +static const struct software_node apl_i2c_node = { + .properties = apl_i2c_properties, +}; + static const struct intel_lpss_platform_info apl_i2c_info = { .clk_rate = 133000000, - .properties = apl_i2c_properties, + .swnode = &apl_i2c_node, }; -static struct property_entry glk_i2c_properties[] = { +static const struct property_entry glk_i2c_properties[] = { PROPERTY_ENTRY_U32("i2c-sda-hold-time-ns", 313), PROPERTY_ENTRY_U32("i2c-sda-falling-time-ns", 171), PROPERTY_ENTRY_U32("i2c-scl-falling-time-ns", 290), { }, }; +static const struct software_node glk_i2c_node = { + .properties = glk_i2c_properties, +}; + static const struct intel_lpss_platform_info glk_i2c_info = { .clk_rate = 133000000, - .properties = glk_i2c_properties, + .swnode = &glk_i2c_node, }; static const struct intel_lpss_platform_info cnl_i2c_info = { .clk_rate = 216000000, - .properties = spt_i2c_properties, + .swnode = &spt_i2c_node, }; static const struct intel_lpss_platform_info ehl_i2c_info = { .clk_rate = 100000000, - .properties = bxt_i2c_properties, + .swnode = &bxt_i2c_node, }; static const struct pci_device_id intel_lpss_pci_ids[] = { diff --git a/drivers/mfd/intel-lpss.c b/drivers/mfd/intel-lpss.c index b0f0781a6b9c..a9bf10bee796 100644 --- a/drivers/mfd/intel-lpss.c +++ b/drivers/mfd/intel-lpss.c @@ -399,7 +399,7 @@ int intel_lpss_probe(struct device *dev, if (ret) return ret; - lpss->cell->properties = info->properties; + lpss->cell->swnode = info->swnode; intel_lpss_init_dev(lpss); diff --git a/drivers/mfd/intel-lpss.h b/drivers/mfd/intel-lpss.h index 4ae58a86bb42..22dbc4aed793 100644 --- a/drivers/mfd/intel-lpss.h +++ b/drivers/mfd/intel-lpss.h @@ -15,14 +15,14 @@ struct device; struct resource; -struct property_entry; +struct software_node; struct intel_lpss_platform_info { struct resource *mem; int irq; unsigned long clk_rate; const char *clk_con_id; - struct property_entry *properties; + const struct software_node *swnode; }; int intel_lpss_probe(struct device *dev, diff --git a/drivers/mfd/intel-m10-bmc.c b/drivers/mfd/intel-m10-bmc.c index cb538983246c..1a9bfb7f48cd 100644 --- a/drivers/mfd/intel-m10-bmc.c +++ b/drivers/mfd/intel-m10-bmc.c @@ -28,10 +28,23 @@ static struct mfd_cell m10bmc_pacn3000_subdevs[] = { { .name = "n3000bmc-secure" }, }; +static const struct regmap_range m10bmc_regmap_range[] = { + regmap_reg_range(M10BMC_LEGACY_BUILD_VER, M10BMC_LEGACY_BUILD_VER), + regmap_reg_range(M10BMC_SYS_BASE, M10BMC_SYS_END), + regmap_reg_range(M10BMC_FLASH_BASE, M10BMC_FLASH_END), +}; + +static const struct regmap_access_table m10bmc_access_table = { + .yes_ranges = m10bmc_regmap_range, + .n_yes_ranges = ARRAY_SIZE(m10bmc_regmap_range), +}; + static struct regmap_config intel_m10bmc_regmap_config = { .reg_bits = 32, .val_bits = 32, .reg_stride = 4, + .wr_table = &m10bmc_access_table, + .rd_table = &m10bmc_access_table, .max_register = M10BMC_MEM_END, }; @@ -121,17 +134,14 @@ static int check_m10bmc_version(struct intel_m10bmc *ddata) int ret; /* - * This check is to filter out the very old legacy BMC versions, - * M10BMC_LEGACY_SYS_BASE is the offset to this old block of mmio - * registers. In the old BMC chips, the BMC version info is stored - * in this old version register (M10BMC_LEGACY_SYS_BASE + - * M10BMC_BUILD_VER), so its read out value would have not been - * LEGACY_INVALID (0xffffffff). But in new BMC chips that the - * driver supports, the value of this register should be - * LEGACY_INVALID. + * This check is to filter out the very old legacy BMC versions. In the + * old BMC chips, the BMC version info is stored in the old version + * register (M10BMC_LEGACY_BUILD_VER), so its read out value would have + * not been M10BMC_VER_LEGACY_INVALID (0xffffffff). But in new BMC + * chips that the driver supports, the value of this register should be + * M10BMC_VER_LEGACY_INVALID. */ - ret = m10bmc_raw_read(ddata, - M10BMC_LEGACY_SYS_BASE + M10BMC_BUILD_VER, &v); + ret = m10bmc_raw_read(ddata, M10BMC_LEGACY_BUILD_VER, &v); if (ret) return -ENODEV; diff --git a/drivers/mfd/intel_quark_i2c_gpio.c b/drivers/mfd/intel_quark_i2c_gpio.c index b67cb0a3ab05..01935ae4e9e1 100644 --- a/drivers/mfd/intel_quark_i2c_gpio.c +++ b/drivers/mfd/intel_quark_i2c_gpio.c @@ -16,8 +16,9 @@ #include <linux/clkdev.h> #include <linux/clk-provider.h> #include <linux/dmi.h> +#include <linux/i2c.h> #include <linux/platform_data/gpio-dwapb.h> -#include <linux/platform_data/i2c-designware.h> +#include <linux/property.h> /* PCI BAR for register base address */ #define MFD_I2C_BAR 0 @@ -45,29 +46,48 @@ #define INTEL_QUARK_I2C_CLK_HZ 33000000 struct intel_quark_mfd { - struct device *dev; struct clk *i2c_clk; struct clk_lookup *i2c_clk_lookup; }; +static const struct property_entry intel_quark_i2c_controller_standard_properties[] = { + PROPERTY_ENTRY_U32("clock-frequency", I2C_MAX_STANDARD_MODE_FREQ), + { } +}; + +static const struct software_node intel_quark_i2c_controller_standard_node = { + .name = "intel-quark-i2c-controller", + .properties = intel_quark_i2c_controller_standard_properties, +}; + +static const struct property_entry intel_quark_i2c_controller_fast_properties[] = { + PROPERTY_ENTRY_U32("clock-frequency", I2C_MAX_FAST_MODE_FREQ), + { } +}; + +static const struct software_node intel_quark_i2c_controller_fast_node = { + .name = "intel-quark-i2c-controller", + .properties = intel_quark_i2c_controller_fast_properties, +}; + static const struct dmi_system_id dmi_platform_info[] = { { .matches = { DMI_EXACT_MATCH(DMI_BOARD_NAME, "Galileo"), }, - .driver_data = (void *)100000, + .driver_data = (void *)&intel_quark_i2c_controller_standard_node, }, { .matches = { DMI_EXACT_MATCH(DMI_BOARD_NAME, "GalileoGen2"), }, - .driver_data = (void *)400000, + .driver_data = (void *)&intel_quark_i2c_controller_fast_node, }, { .matches = { DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"), }, - .driver_data = (void *)400000, + .driver_data = (void *)&intel_quark_i2c_controller_fast_node, }, {} }; @@ -98,15 +118,7 @@ static struct mfd_cell_acpi_match intel_quark_acpi_match_gpio = { }; static struct mfd_cell intel_quark_mfd_cells[] = { - { - .id = MFD_GPIO_BAR, - .name = "gpio-dwapb", - .acpi_match = &intel_quark_acpi_match_gpio, - .num_resources = ARRAY_SIZE(intel_quark_gpio_res), - .resources = intel_quark_gpio_res, - .ignore_resource_conflicts = true, - }, - { + [MFD_I2C_BAR] = { .id = MFD_I2C_BAR, .name = "i2c_designware", .acpi_match = &intel_quark_acpi_match_i2c, @@ -114,6 +126,14 @@ static struct mfd_cell intel_quark_mfd_cells[] = { .resources = intel_quark_i2c_res, .ignore_resource_conflicts = true, }, + [MFD_GPIO_BAR] = { + .id = MFD_GPIO_BAR, + .name = "gpio-dwapb", + .acpi_match = &intel_quark_acpi_match_gpio, + .num_resources = ARRAY_SIZE(intel_quark_gpio_res), + .resources = intel_quark_gpio_res, + .ignore_resource_conflicts = true, + }, }; static const struct pci_device_id intel_quark_mfd_ids[] = { @@ -157,48 +177,37 @@ static void intel_quark_unregister_i2c_clk(struct device *dev) clk_unregister(quark_mfd->i2c_clk); } -static int intel_quark_i2c_setup(struct pci_dev *pdev, struct mfd_cell *cell) +static int intel_quark_i2c_setup(struct pci_dev *pdev) { + struct mfd_cell *cell = &intel_quark_mfd_cells[MFD_I2C_BAR]; + struct resource *res = intel_quark_i2c_res; const struct dmi_system_id *dmi_id; - struct dw_i2c_platform_data *pdata; - struct resource *res = (struct resource *)cell->resources; - struct device *dev = &pdev->dev; - res[INTEL_QUARK_IORES_MEM].start = - pci_resource_start(pdev, MFD_I2C_BAR); - res[INTEL_QUARK_IORES_MEM].end = - pci_resource_end(pdev, MFD_I2C_BAR); + res[INTEL_QUARK_IORES_MEM].start = pci_resource_start(pdev, MFD_I2C_BAR); + res[INTEL_QUARK_IORES_MEM].end = pci_resource_end(pdev, MFD_I2C_BAR); - res[INTEL_QUARK_IORES_IRQ].start = pdev->irq; - res[INTEL_QUARK_IORES_IRQ].end = pdev->irq; - - pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); - if (!pdata) - return -ENOMEM; + res[INTEL_QUARK_IORES_IRQ].start = pci_irq_vector(pdev, 0); + res[INTEL_QUARK_IORES_IRQ].end = pci_irq_vector(pdev, 0); /* Normal mode by default */ - pdata->i2c_scl_freq = 100000; + cell->swnode = &intel_quark_i2c_controller_standard_node; dmi_id = dmi_first_match(dmi_platform_info); if (dmi_id) - pdata->i2c_scl_freq = (uintptr_t)dmi_id->driver_data; - - cell->platform_data = pdata; - cell->pdata_size = sizeof(*pdata); + cell->swnode = (struct software_node *)dmi_id->driver_data; return 0; } -static int intel_quark_gpio_setup(struct pci_dev *pdev, struct mfd_cell *cell) +static int intel_quark_gpio_setup(struct pci_dev *pdev) { + struct mfd_cell *cell = &intel_quark_mfd_cells[MFD_GPIO_BAR]; + struct resource *res = intel_quark_gpio_res; struct dwapb_platform_data *pdata; - struct resource *res = (struct resource *)cell->resources; struct device *dev = &pdev->dev; - res[INTEL_QUARK_IORES_MEM].start = - pci_resource_start(pdev, MFD_GPIO_BAR); - res[INTEL_QUARK_IORES_MEM].end = - pci_resource_end(pdev, MFD_GPIO_BAR); + res[INTEL_QUARK_IORES_MEM].start = pci_resource_start(pdev, MFD_GPIO_BAR); + res[INTEL_QUARK_IORES_MEM].end = pci_resource_end(pdev, MFD_GPIO_BAR); pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) @@ -217,7 +226,7 @@ static int intel_quark_gpio_setup(struct pci_dev *pdev, struct mfd_cell *cell) pdata->properties->idx = 0; pdata->properties->ngpio = INTEL_QUARK_MFD_NGPIO; pdata->properties->gpio_base = INTEL_QUARK_MFD_GPIO_BASE; - pdata->properties->irq[0] = pdev->irq; + pdata->properties->irq[0] = pci_irq_vector(pdev, 0); pdata->properties->irq_shared = true; cell->platform_data = pdata; @@ -240,29 +249,37 @@ static int intel_quark_mfd_probe(struct pci_dev *pdev, if (!quark_mfd) return -ENOMEM; - quark_mfd->dev = &pdev->dev; dev_set_drvdata(&pdev->dev, quark_mfd); ret = intel_quark_register_i2c_clk(&pdev->dev); if (ret) return ret; - ret = intel_quark_i2c_setup(pdev, &intel_quark_mfd_cells[1]); - if (ret) + pci_set_master(pdev); + + /* This driver only requires 1 IRQ vector */ + ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES); + if (ret < 0) goto err_unregister_i2c_clk; - ret = intel_quark_gpio_setup(pdev, &intel_quark_mfd_cells[0]); + ret = intel_quark_i2c_setup(pdev); if (ret) - goto err_unregister_i2c_clk; + goto err_free_irq_vectors; + + ret = intel_quark_gpio_setup(pdev); + if (ret) + goto err_free_irq_vectors; ret = mfd_add_devices(&pdev->dev, 0, intel_quark_mfd_cells, ARRAY_SIZE(intel_quark_mfd_cells), NULL, 0, NULL); if (ret) - goto err_unregister_i2c_clk; + goto err_free_irq_vectors; return 0; +err_free_irq_vectors: + pci_free_irq_vectors(pdev); err_unregister_i2c_clk: intel_quark_unregister_i2c_clk(&pdev->dev); return ret; @@ -270,8 +287,9 @@ err_unregister_i2c_clk: static void intel_quark_mfd_remove(struct pci_dev *pdev) { - intel_quark_unregister_i2c_clk(&pdev->dev); mfd_remove_devices(&pdev->dev); + pci_free_irq_vectors(pdev); + intel_quark_unregister_i2c_clk(&pdev->dev); } static struct pci_driver intel_quark_mfd_driver = { diff --git a/drivers/mfd/lm3533-core.c b/drivers/mfd/lm3533-core.c index 22fdffd564f7..5690768f3e63 100644 --- a/drivers/mfd/lm3533-core.c +++ b/drivers/mfd/lm3533-core.c @@ -358,7 +358,7 @@ static struct attribute *lm3533_attributes[] = { static umode_t lm3533_attr_is_visible(struct kobject *kobj, struct attribute *attr, int n) { - struct device *dev = container_of(kobj, struct device, kobj); + struct device *dev = kobj_to_dev(kobj); struct lm3533 *lm3533 = dev_get_drvdata(dev); struct device_attribute *dattr = to_dev_attr(attr); struct lm3533_device_attribute *lattr = to_lm3533_dev_attr(dattr); diff --git a/drivers/mfd/lpc_sch.c b/drivers/mfd/lpc_sch.c index f27eb8dabc1c..428a526cbe86 100644 --- a/drivers/mfd/lpc_sch.c +++ b/drivers/mfd/lpc_sch.c @@ -26,9 +26,6 @@ #define GPIO_IO_SIZE 64 #define GPIO_IO_SIZE_CENTERTON 128 -/* Intel Quark X1000 GPIO IRQ Number */ -#define GPIO_IRQ_QUARK_X1000 9 - #define WDTBASE 0x84 #define WDT_IO_SIZE 64 @@ -43,30 +40,25 @@ struct lpc_sch_info { unsigned int io_size_smbus; unsigned int io_size_gpio; unsigned int io_size_wdt; - int irq_gpio; }; static struct lpc_sch_info sch_chipset_info[] = { [LPC_SCH] = { .io_size_smbus = SMBUS_IO_SIZE, .io_size_gpio = GPIO_IO_SIZE, - .irq_gpio = -1, }, [LPC_ITC] = { .io_size_smbus = SMBUS_IO_SIZE, .io_size_gpio = GPIO_IO_SIZE, .io_size_wdt = WDT_IO_SIZE, - .irq_gpio = -1, }, [LPC_CENTERTON] = { .io_size_smbus = SMBUS_IO_SIZE, .io_size_gpio = GPIO_IO_SIZE_CENTERTON, .io_size_wdt = WDT_IO_SIZE, - .irq_gpio = -1, }, [LPC_QUARK_X1000] = { .io_size_gpio = GPIO_IO_SIZE, - .irq_gpio = GPIO_IRQ_QUARK_X1000, .io_size_wdt = WDT_IO_SIZE, }, }; @@ -113,13 +105,13 @@ static int lpc_sch_get_io(struct pci_dev *pdev, int where, const char *name, } static int lpc_sch_populate_cell(struct pci_dev *pdev, int where, - const char *name, int size, int irq, - int id, struct mfd_cell *cell) + const char *name, int size, int id, + struct mfd_cell *cell) { struct resource *res; int ret; - res = devm_kcalloc(&pdev->dev, 2, sizeof(*res), GFP_KERNEL); + res = devm_kzalloc(&pdev->dev, sizeof(*res), GFP_KERNEL); if (!res) return -ENOMEM; @@ -135,18 +127,6 @@ static int lpc_sch_populate_cell(struct pci_dev *pdev, int where, cell->ignore_resource_conflicts = true; cell->id = id; - /* Check if we need to add an IRQ resource */ - if (irq < 0) - return 0; - - res++; - - res->start = irq; - res->end = irq; - res->flags = IORESOURCE_IRQ; - - cell->num_resources++; - return 0; } @@ -158,7 +138,7 @@ static int lpc_sch_probe(struct pci_dev *dev, const struct pci_device_id *id) int ret; ret = lpc_sch_populate_cell(dev, SMBASE, "isch_smbus", - info->io_size_smbus, -1, + info->io_size_smbus, id->device, &lpc_sch_cells[cells]); if (ret < 0) return ret; @@ -166,7 +146,7 @@ static int lpc_sch_probe(struct pci_dev *dev, const struct pci_device_id *id) cells++; ret = lpc_sch_populate_cell(dev, GPIOBASE, "sch_gpio", - info->io_size_gpio, info->irq_gpio, + info->io_size_gpio, id->device, &lpc_sch_cells[cells]); if (ret < 0) return ret; @@ -174,7 +154,7 @@ static int lpc_sch_probe(struct pci_dev *dev, const struct pci_device_id *id) cells++; ret = lpc_sch_populate_cell(dev, WDTBASE, "ie6xx_wdt", - info->io_size_wdt, -1, + info->io_size_wdt, id->device, &lpc_sch_cells[cells]); if (ret < 0) return ret; diff --git a/drivers/mfd/max8997.c b/drivers/mfd/max8997.c index 55d3a6f97783..68d8f2b95287 100644 --- a/drivers/mfd/max8997.c +++ b/drivers/mfd/max8997.c @@ -29,9 +29,9 @@ static const struct mfd_cell max8997_devs[] = { { .name = "max8997-pmic", }, { .name = "max8997-rtc", }, - { .name = "max8997-battery", .of_compatible = "maxim,max8997-battery", }, + { .name = "max8997-battery", }, { .name = "max8997-haptic", }, - { .name = "max8997-muic", .of_compatible = "maxim,max8997-muic", }, + { .name = "max8997-muic", }, { .name = "max8997-led", .id = 1 }, { .name = "max8997-led", .id = 2 }, }; diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c index fc00aaccb5f7..6f02b8022c6d 100644 --- a/drivers/mfd/mfd-core.c +++ b/drivers/mfd/mfd-core.c @@ -65,7 +65,7 @@ static void mfd_acpi_add_device(const struct mfd_cell *cell, { const struct mfd_cell_acpi_match *match = cell->acpi_match; struct acpi_device *parent, *child; - struct acpi_device *adev; + struct acpi_device *adev = NULL; parent = ACPI_COMPANION(pdev->dev.parent); if (!parent) @@ -77,10 +77,9 @@ static void mfd_acpi_add_device(const struct mfd_cell *cell, * _ADR or it will use the parent handle if is no ID is given. * * Note that use of _ADR is a grey area in the ACPI specification, - * though Intel Galileo Gen2 is using it to distinguish the children - * devices. + * though at least Intel Galileo Gen 2 is using it to distinguish + * the children devices. */ - adev = parent; if (match) { if (match->pnpid) { struct acpi_device_id ids[2] = {}; @@ -93,22 +92,11 @@ static void mfd_acpi_add_device(const struct mfd_cell *cell, } } } else { - unsigned long long adr; - acpi_status status; - - list_for_each_entry(child, &parent->children, node) { - status = acpi_evaluate_integer(child->handle, - "_ADR", NULL, - &adr); - if (ACPI_SUCCESS(status) && match->adr == adr) { - adev = child; - break; - } - } + adev = acpi_find_child_device(parent, match->adr, false); } } - ACPI_COMPANION_SET(&pdev->dev, adev); + ACPI_COMPANION_SET(&pdev->dev, adev ?: parent); } #else static inline void mfd_acpi_add_device(const struct mfd_cell *cell, @@ -238,8 +226,8 @@ static int mfd_add_device(struct device *parent, int id, goto fail_of_entry; } - if (cell->properties) { - ret = platform_device_add_properties(pdev, cell->properties); + if (cell->swnode) { + ret = device_add_software_node(&pdev->dev, cell->swnode); if (ret) goto fail_of_entry; } @@ -304,6 +292,7 @@ fail_of_entry: list_del(&of_entry->list); kfree(of_entry); } + device_remove_software_node(&pdev->dev); fail_alias: regulator_bulk_unregister_supply_alias(&pdev->dev, cell->parent_supplies, @@ -372,6 +361,8 @@ static int mfd_remove_devices_fn(struct device *dev, void *data) regulator_bulk_unregister_supply_alias(dev, cell->parent_supplies, cell->num_parent_supplies); + device_remove_software_node(&pdev->dev); + platform_device_unregister(pdev); return 0; } diff --git a/drivers/mfd/ntxec.c b/drivers/mfd/ntxec.c new file mode 100644 index 000000000000..b711e73eedcb --- /dev/null +++ b/drivers/mfd/ntxec.c @@ -0,0 +1,271 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * The Netronix embedded controller is a microcontroller found in some + * e-book readers designed by the original design manufacturer Netronix, Inc. + * It contains RTC, battery monitoring, system power management, and PWM + * functionality. + * + * This driver implements register access, version detection, and system + * power-off/reset. + * + * Copyright 2020 Jonathan Neuschäfer <j.neuschaefer@gmx.net> + */ + +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/i2c.h> +#include <linux/mfd/core.h> +#include <linux/mfd/ntxec.h> +#include <linux/module.h> +#include <linux/pm.h> +#include <linux/reboot.h> +#include <linux/regmap.h> +#include <linux/types.h> +#include <asm/unaligned.h> + +#define NTXEC_REG_VERSION 0x00 +#define NTXEC_REG_POWEROFF 0x50 +#define NTXEC_REG_POWERKEEP 0x70 +#define NTXEC_REG_RESET 0x90 + +#define NTXEC_POWEROFF_VALUE 0x0100 +#define NTXEC_POWERKEEP_VALUE 0x0800 +#define NTXEC_RESET_VALUE 0xff00 + +static struct i2c_client *poweroff_restart_client; + +static void ntxec_poweroff(void) +{ + int res; + u8 buf[3] = { NTXEC_REG_POWEROFF }; + struct i2c_msg msgs[] = { + { + .addr = poweroff_restart_client->addr, + .flags = 0, + .len = sizeof(buf), + .buf = buf, + }, + }; + + put_unaligned_be16(NTXEC_POWEROFF_VALUE, buf + 1); + + res = i2c_transfer(poweroff_restart_client->adapter, msgs, ARRAY_SIZE(msgs)); + if (res < 0) + dev_warn(&poweroff_restart_client->dev, + "Failed to power off (err = %d)\n", res); + + /* + * The time from the register write until the host CPU is powered off + * has been observed to be about 2.5 to 3 seconds. Sleep long enough to + * safely avoid returning from the poweroff handler. + */ + msleep(5000); +} + +static int ntxec_restart(struct notifier_block *nb, + unsigned long action, void *data) +{ + int res; + u8 buf[3] = { NTXEC_REG_RESET }; + /* + * NOTE: The lower half of the reset value is not sent, because sending + * it causes an I2C error. (The reset handler in the downstream driver + * does send the full two-byte value, but doesn't check the result). + */ + struct i2c_msg msgs[] = { + { + .addr = poweroff_restart_client->addr, + .flags = 0, + .len = sizeof(buf) - 1, + .buf = buf, + }, + }; + + put_unaligned_be16(NTXEC_RESET_VALUE, buf + 1); + + res = i2c_transfer(poweroff_restart_client->adapter, msgs, ARRAY_SIZE(msgs)); + if (res < 0) + dev_warn(&poweroff_restart_client->dev, + "Failed to restart (err = %d)\n", res); + + return NOTIFY_DONE; +} + +static struct notifier_block ntxec_restart_handler = { + .notifier_call = ntxec_restart, + .priority = 128, +}; + +static int regmap_ignore_write(void *context, + unsigned int reg, unsigned int val) + +{ + struct regmap *regmap = context; + + regmap_write(regmap, reg, val); + + return 0; +} + +static int regmap_wrap_read(void *context, unsigned int reg, + unsigned int *val) +{ + struct regmap *regmap = context; + + return regmap_read(regmap, reg, val); +} + +/* + * Some firmware versions do not ack written data, add a wrapper. It + * is used to stack another regmap on top. + */ +static const struct regmap_config regmap_config_noack = { + .name = "ntxec_noack", + .reg_bits = 8, + .val_bits = 16, + .cache_type = REGCACHE_NONE, + .reg_write = regmap_ignore_write, + .reg_read = regmap_wrap_read +}; + +static const struct regmap_config regmap_config = { + .name = "ntxec", + .reg_bits = 8, + .val_bits = 16, + .cache_type = REGCACHE_NONE, + .val_format_endian = REGMAP_ENDIAN_BIG, +}; + +static const struct mfd_cell ntxec_subdev[] = { + { .name = "ntxec-rtc" }, + { .name = "ntxec-pwm" }, +}; + +static const struct mfd_cell ntxec_subdev_pwm[] = { + { .name = "ntxec-pwm" }, +}; + +static int ntxec_probe(struct i2c_client *client) +{ + struct ntxec *ec; + unsigned int version; + int res; + const struct mfd_cell *subdevs; + size_t n_subdevs; + + ec = devm_kmalloc(&client->dev, sizeof(*ec), GFP_KERNEL); + if (!ec) + return -ENOMEM; + + ec->dev = &client->dev; + + ec->regmap = devm_regmap_init_i2c(client, ®map_config); + if (IS_ERR(ec->regmap)) { + dev_err(ec->dev, "Failed to set up regmap for device\n"); + return PTR_ERR(ec->regmap); + } + + /* Determine the firmware version */ + res = regmap_read(ec->regmap, NTXEC_REG_VERSION, &version); + if (res < 0) { + dev_err(ec->dev, "Failed to read firmware version number\n"); + return res; + } + + /* Bail out if we encounter an unknown firmware version */ + switch (version) { + case NTXEC_VERSION_KOBO_AURA: + subdevs = ntxec_subdev; + n_subdevs = ARRAY_SIZE(ntxec_subdev); + break; + case NTXEC_VERSION_TOLINO_SHINE2: + subdevs = ntxec_subdev_pwm; + n_subdevs = ARRAY_SIZE(ntxec_subdev_pwm); + /* Another regmap stacked on top of the other */ + ec->regmap = devm_regmap_init(ec->dev, NULL, + ec->regmap, + ®map_config_noack); + if (IS_ERR(ec->regmap)) + return PTR_ERR(ec->regmap); + break; + default: + dev_err(ec->dev, + "Netronix embedded controller version %04x is not supported.\n", + version); + return -ENODEV; + } + + dev_info(ec->dev, + "Netronix embedded controller version %04x detected.\n", version); + + if (of_device_is_system_power_controller(ec->dev->of_node)) { + /* + * Set the 'powerkeep' bit. This is necessary on some boards + * in order to keep the system running. + */ + res = regmap_write(ec->regmap, NTXEC_REG_POWERKEEP, + NTXEC_POWERKEEP_VALUE); + if (res < 0) + return res; + + if (poweroff_restart_client) + /* + * Another instance of the driver already took + * poweroff/restart duties. + */ + dev_err(ec->dev, "poweroff_restart_client already assigned\n"); + else + poweroff_restart_client = client; + + if (pm_power_off) + /* Another driver already registered a poweroff handler. */ + dev_err(ec->dev, "pm_power_off already assigned\n"); + else + pm_power_off = ntxec_poweroff; + + res = register_restart_handler(&ntxec_restart_handler); + if (res) + dev_err(ec->dev, + "Failed to register restart handler: %d\n", res); + } + + i2c_set_clientdata(client, ec); + + res = devm_mfd_add_devices(ec->dev, PLATFORM_DEVID_NONE, + subdevs, n_subdevs, NULL, 0, NULL); + if (res) + dev_err(ec->dev, "Failed to add subdevices: %d\n", res); + + return res; +} + +static int ntxec_remove(struct i2c_client *client) +{ + if (client == poweroff_restart_client) { + poweroff_restart_client = NULL; + pm_power_off = NULL; + unregister_restart_handler(&ntxec_restart_handler); + } + + return 0; +} + +static const struct of_device_id of_ntxec_match_table[] = { + { .compatible = "netronix,ntxec", }, + {} +}; +MODULE_DEVICE_TABLE(of, of_ntxec_match_table); + +static struct i2c_driver ntxec_driver = { + .driver = { + .name = "ntxec", + .of_match_table = of_ntxec_match_table, + }, + .probe_new = ntxec_probe, + .remove = ntxec_remove, +}; +module_i2c_driver(ntxec_driver); + +MODULE_AUTHOR("Jonathan Neuschäfer <j.neuschaefer@gmx.net>"); +MODULE_DESCRIPTION("Core driver for Netronix EC"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/rn5t618.c b/drivers/mfd/rn5t618.c index dc452df1f1bf..6ed04e6dbc78 100644 --- a/drivers/mfd/rn5t618.c +++ b/drivers/mfd/rn5t618.c @@ -45,8 +45,11 @@ static bool rn5t618_volatile_reg(struct device *dev, unsigned int reg) case RN5T618_INTMON: case RN5T618_RTC_CTRL1 ... RN5T618_RTC_CTRL2: case RN5T618_RTC_SECONDS ... RN5T618_RTC_YEAR: + case RN5T618_CHGCTL1: + case RN5T618_REGISET1 ... RN5T618_REGISET2: case RN5T618_CHGSTATE: case RN5T618_CHGCTRL_IRR ... RN5T618_CHGERR_MONI: + case RN5T618_GCHGDET: case RN5T618_CONTROL ... RN5T618_CC_AVEREG0: return true; default: diff --git a/drivers/mfd/rohm-bd71828.c b/drivers/mfd/rohm-bd71828.c index 210261d026f2..714d9fcbf07b 100644 --- a/drivers/mfd/rohm-bd71828.c +++ b/drivers/mfd/rohm-bd71828.c @@ -2,7 +2,7 @@ // // Copyright (C) 2019 ROHM Semiconductors // -// ROHM BD71828 PMIC driver +// ROHM BD71828/BD71815 PMIC driver #include <linux/gpio_keys.h> #include <linux/i2c.h> @@ -11,7 +11,9 @@ #include <linux/ioport.h> #include <linux/irq.h> #include <linux/mfd/core.h> +#include <linux/mfd/rohm-bd71815.h> #include <linux/mfd/rohm-bd71828.h> +#include <linux/mfd/rohm-generic.h> #include <linux/module.h> #include <linux/of_device.h> #include <linux/regmap.h> @@ -29,12 +31,84 @@ static struct gpio_keys_platform_data bd71828_powerkey_data = { .name = "bd71828-pwrkey", }; -static const struct resource rtc_irqs[] = { +static const struct resource bd71815_rtc_irqs[] = { + DEFINE_RES_IRQ_NAMED(BD71815_INT_RTC0, "bd71815-rtc-alm-0"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_RTC1, "bd71815-rtc-alm-1"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_RTC2, "bd71815-rtc-alm-2"), +}; + +static const struct resource bd71828_rtc_irqs[] = { DEFINE_RES_IRQ_NAMED(BD71828_INT_RTC0, "bd71828-rtc-alm-0"), DEFINE_RES_IRQ_NAMED(BD71828_INT_RTC1, "bd71828-rtc-alm-1"), DEFINE_RES_IRQ_NAMED(BD71828_INT_RTC2, "bd71828-rtc-alm-2"), }; +static struct resource bd71815_power_irqs[] = { + DEFINE_RES_IRQ_NAMED(BD71815_INT_DCIN_RMV, "bd71815-dcin-rmv"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_CLPS_OUT, "bd71815-clps-out"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_CLPS_IN, "bd71815-clps-in"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_DCIN_OVP_RES, "bd71815-dcin-ovp-res"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_DCIN_OVP_DET, "bd71815-dcin-ovp-det"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_DCIN_MON_RES, "bd71815-dcin-mon-res"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_DCIN_MON_DET, "bd71815-dcin-mon-det"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_VSYS_UV_RES, "bd71815-vsys-uv-res"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_VSYS_UV_DET, "bd71815-vsys-uv-det"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_VSYS_LOW_RES, "bd71815-vsys-low-res"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_VSYS_LOW_DET, "bd71815-vsys-low-det"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_VSYS_MON_RES, "bd71815-vsys-mon-res"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_VSYS_MON_RES, "bd71815-vsys-mon-det"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_CHG_WDG_TEMP, "bd71815-chg-wdg-temp"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_CHG_WDG_TIME, "bd71815-chg-wdg"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_CHG_RECHARGE_RES, "bd71815-rechg-res"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_CHG_RECHARGE_DET, "bd71815-rechg-det"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_CHG_RANGED_TEMP_TRANSITION, "bd71815-ranged-temp-transit"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_CHG_STATE_TRANSITION, "bd71815-chg-state-change"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_TEMP_NORMAL, "bd71815-bat-temp-normal"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_TEMP_ERANGE, "bd71815-bat-temp-erange"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_REMOVED, "bd71815-bat-rmv"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_DETECTED, "bd71815-bat-det"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_THERM_REMOVED, "bd71815-therm-rmv"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_THERM_DETECTED, "bd71815-therm-det"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_DEAD, "bd71815-bat-dead"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_SHORTC_RES, "bd71815-bat-short-res"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_SHORTC_DET, "bd71815-bat-short-det"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_LOW_VOLT_RES, "bd71815-bat-low-res"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_LOW_VOLT_DET, "bd71815-bat-low-det"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_OVER_VOLT_RES, "bd71815-bat-over-res"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_OVER_VOLT_DET, "bd71815-bat-over-det"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_MON_RES, "bd71815-bat-mon-res"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_MON_DET, "bd71815-bat-mon-det"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_CC_MON1, "bd71815-bat-cc-mon1"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_CC_MON2, "bd71815-bat-cc-mon2"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_CC_MON3, "bd71815-bat-cc-mon3"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_OVER_CURR_1_RES, "bd71815-bat-oc1-res"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_OVER_CURR_1_DET, "bd71815-bat-oc1-det"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_OVER_CURR_2_RES, "bd71815-bat-oc2-res"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_OVER_CURR_2_DET, "bd71815-bat-oc2-det"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_OVER_CURR_3_RES, "bd71815-bat-oc3-res"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_OVER_CURR_3_DET, "bd71815-bat-oc3-det"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_TEMP_BAT_LOW_RES, "bd71815-bat-low-res"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_TEMP_BAT_LOW_DET, "bd71815-bat-low-det"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_TEMP_BAT_HI_RES, "bd71815-bat-hi-res"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_TEMP_BAT_HI_DET, "bd71815-bat-hi-det"), +}; + +static struct mfd_cell bd71815_mfd_cells[] = { + { .name = "bd71815-pmic", }, + { .name = "bd71815-clk", }, + { .name = "bd71815-gpo", }, + { + .name = "bd71815-power", + .num_resources = ARRAY_SIZE(bd71815_power_irqs), + .resources = &bd71815_power_irqs[0], + }, + { + .name = "bd71815-rtc", + .num_resources = ARRAY_SIZE(bd71815_rtc_irqs), + .resources = &bd71815_rtc_irqs[0], + }, +}; + static struct mfd_cell bd71828_mfd_cells[] = { { .name = "bd71828-pmic", }, { .name = "bd71828-gpio", }, @@ -47,8 +121,8 @@ static struct mfd_cell bd71828_mfd_cells[] = { { .name = "bd71827-power", }, { .name = "bd71828-rtc", - .resources = rtc_irqs, - .num_resources = ARRAY_SIZE(rtc_irqs), + .resources = bd71828_rtc_irqs, + .num_resources = ARRAY_SIZE(bd71828_rtc_irqs), }, { .name = "gpio-keys", .platform_data = &bd71828_powerkey_data, @@ -56,7 +130,35 @@ static struct mfd_cell bd71828_mfd_cells[] = { }, }; -static const struct regmap_range volatile_ranges[] = { +static const struct regmap_range bd71815_volatile_ranges[] = { + { + .range_min = BD71815_REG_SEC, + .range_max = BD71815_REG_YEAR, + }, { + .range_min = BD71815_REG_CONF, + .range_max = BD71815_REG_BAT_TEMP, + }, { + .range_min = BD71815_REG_VM_IBAT_U, + .range_max = BD71815_REG_CC_CTRL, + }, { + .range_min = BD71815_REG_CC_STAT, + .range_max = BD71815_REG_CC_CURCD_L, + }, { + .range_min = BD71815_REG_VM_BTMP_MON, + .range_max = BD71815_REG_VM_BTMP_MON, + }, { + .range_min = BD71815_REG_INT_STAT, + .range_max = BD71815_REG_INT_UPDATE, + }, { + .range_min = BD71815_REG_VM_VSYS_U, + .range_max = BD71815_REG_REX_CTRL_1, + }, { + .range_min = BD71815_REG_FULL_CCNTD_3, + .range_max = BD71815_REG_CCNTD_CHG_2, + }, +}; + +static const struct regmap_range bd71828_volatile_ranges[] = { { .range_min = BD71828_REG_PS_CTRL_1, .range_max = BD71828_REG_PS_CTRL_1, @@ -80,15 +182,28 @@ static const struct regmap_range volatile_ranges[] = { }, }; -static const struct regmap_access_table volatile_regs = { - .yes_ranges = &volatile_ranges[0], - .n_yes_ranges = ARRAY_SIZE(volatile_ranges), +static const struct regmap_access_table bd71815_volatile_regs = { + .yes_ranges = &bd71815_volatile_ranges[0], + .n_yes_ranges = ARRAY_SIZE(bd71815_volatile_ranges), +}; + +static const struct regmap_access_table bd71828_volatile_regs = { + .yes_ranges = &bd71828_volatile_ranges[0], + .n_yes_ranges = ARRAY_SIZE(bd71828_volatile_ranges), +}; + +static const struct regmap_config bd71815_regmap = { + .reg_bits = 8, + .val_bits = 8, + .volatile_table = &bd71815_volatile_regs, + .max_register = BD71815_MAX_REGISTER - 1, + .cache_type = REGCACHE_RBTREE, }; -static struct regmap_config bd71828_regmap = { +static const struct regmap_config bd71828_regmap = { .reg_bits = 8, .val_bits = 8, - .volatile_table = &volatile_regs, + .volatile_table = &bd71828_volatile_regs, .max_register = BD71828_MAX_REGISTER, .cache_type = REGCACHE_RBTREE, }; @@ -96,7 +211,7 @@ static struct regmap_config bd71828_regmap = { /* * Mapping of main IRQ register bits to sub-IRQ register offsets so that we can * access corect sub-IRQ registers based on bits that are set in main IRQ - * register. + * register. BD71815 and BD71828 have same sub-register-block offests. */ static unsigned int bit0_offsets[] = {11}; /* RTC IRQ */ @@ -108,7 +223,7 @@ static unsigned int bit5_offsets[] = {3}; /* VSYS IRQ */ static unsigned int bit6_offsets[] = {1, 2}; /* DCIN IRQ */ static unsigned int bit7_offsets[] = {0}; /* BUCK IRQ */ -static struct regmap_irq_sub_irq_map bd71828_sub_irq_offsets[] = { +static struct regmap_irq_sub_irq_map bd718xx_sub_irq_offsets[] = { REGMAP_IRQ_MAIN_REG_OFFSET(bit0_offsets), REGMAP_IRQ_MAIN_REG_OFFSET(bit1_offsets), REGMAP_IRQ_MAIN_REG_OFFSET(bit2_offsets), @@ -119,6 +234,88 @@ static struct regmap_irq_sub_irq_map bd71828_sub_irq_offsets[] = { REGMAP_IRQ_MAIN_REG_OFFSET(bit7_offsets), }; +static const struct regmap_irq bd71815_irqs[] = { + REGMAP_IRQ_REG(BD71815_INT_BUCK1_OCP, 0, BD71815_INT_BUCK1_OCP_MASK), + REGMAP_IRQ_REG(BD71815_INT_BUCK2_OCP, 0, BD71815_INT_BUCK2_OCP_MASK), + REGMAP_IRQ_REG(BD71815_INT_BUCK3_OCP, 0, BD71815_INT_BUCK3_OCP_MASK), + REGMAP_IRQ_REG(BD71815_INT_BUCK4_OCP, 0, BD71815_INT_BUCK4_OCP_MASK), + REGMAP_IRQ_REG(BD71815_INT_BUCK5_OCP, 0, BD71815_INT_BUCK5_OCP_MASK), + REGMAP_IRQ_REG(BD71815_INT_LED_OVP, 0, BD71815_INT_LED_OVP_MASK), + REGMAP_IRQ_REG(BD71815_INT_LED_OCP, 0, BD71815_INT_LED_OCP_MASK), + REGMAP_IRQ_REG(BD71815_INT_LED_SCP, 0, BD71815_INT_LED_SCP_MASK), + /* DCIN1 interrupts */ + REGMAP_IRQ_REG(BD71815_INT_DCIN_RMV, 1, BD71815_INT_DCIN_RMV_MASK), + REGMAP_IRQ_REG(BD71815_INT_CLPS_OUT, 1, BD71815_INT_CLPS_OUT_MASK), + REGMAP_IRQ_REG(BD71815_INT_CLPS_IN, 1, BD71815_INT_CLPS_IN_MASK), + REGMAP_IRQ_REG(BD71815_INT_DCIN_OVP_RES, 1, BD71815_INT_DCIN_OVP_RES_MASK), + REGMAP_IRQ_REG(BD71815_INT_DCIN_OVP_DET, 1, BD71815_INT_DCIN_OVP_DET_MASK), + /* DCIN2 interrupts */ + REGMAP_IRQ_REG(BD71815_INT_DCIN_MON_RES, 2, BD71815_INT_DCIN_MON_RES_MASK), + REGMAP_IRQ_REG(BD71815_INT_DCIN_MON_DET, 2, BD71815_INT_DCIN_MON_DET_MASK), + REGMAP_IRQ_REG(BD71815_INT_WDOG, 2, BD71815_INT_WDOG_MASK), + /* Vsys */ + REGMAP_IRQ_REG(BD71815_INT_VSYS_UV_RES, 3, BD71815_INT_VSYS_UV_RES_MASK), + REGMAP_IRQ_REG(BD71815_INT_VSYS_UV_DET, 3, BD71815_INT_VSYS_UV_DET_MASK), + REGMAP_IRQ_REG(BD71815_INT_VSYS_LOW_RES, 3, BD71815_INT_VSYS_LOW_RES_MASK), + REGMAP_IRQ_REG(BD71815_INT_VSYS_LOW_DET, 3, BD71815_INT_VSYS_LOW_DET_MASK), + REGMAP_IRQ_REG(BD71815_INT_VSYS_MON_RES, 3, BD71815_INT_VSYS_MON_RES_MASK), + REGMAP_IRQ_REG(BD71815_INT_VSYS_MON_DET, 3, BD71815_INT_VSYS_MON_DET_MASK), + /* Charger */ + REGMAP_IRQ_REG(BD71815_INT_CHG_WDG_TEMP, 4, BD71815_INT_CHG_WDG_TEMP_MASK), + REGMAP_IRQ_REG(BD71815_INT_CHG_WDG_TIME, 4, BD71815_INT_CHG_WDG_TIME_MASK), + REGMAP_IRQ_REG(BD71815_INT_CHG_RECHARGE_RES, 4, BD71815_INT_CHG_RECHARGE_RES_MASK), + REGMAP_IRQ_REG(BD71815_INT_CHG_RECHARGE_DET, 4, BD71815_INT_CHG_RECHARGE_DET_MASK), + REGMAP_IRQ_REG(BD71815_INT_CHG_RANGED_TEMP_TRANSITION, 4, + BD71815_INT_CHG_RANGED_TEMP_TRANSITION_MASK), + REGMAP_IRQ_REG(BD71815_INT_CHG_STATE_TRANSITION, 4, BD71815_INT_CHG_STATE_TRANSITION_MASK), + /* Battery */ + REGMAP_IRQ_REG(BD71815_INT_BAT_TEMP_NORMAL, 5, BD71815_INT_BAT_TEMP_NORMAL_MASK), + REGMAP_IRQ_REG(BD71815_INT_BAT_TEMP_ERANGE, 5, BD71815_INT_BAT_TEMP_ERANGE_MASK), + REGMAP_IRQ_REG(BD71815_INT_BAT_REMOVED, 5, BD71815_INT_BAT_REMOVED_MASK), + REGMAP_IRQ_REG(BD71815_INT_BAT_DETECTED, 5, BD71815_INT_BAT_DETECTED_MASK), + REGMAP_IRQ_REG(BD71815_INT_THERM_REMOVED, 5, BD71815_INT_THERM_REMOVED_MASK), + REGMAP_IRQ_REG(BD71815_INT_THERM_DETECTED, 5, BD71815_INT_THERM_DETECTED_MASK), + /* Battery Mon 1 */ + REGMAP_IRQ_REG(BD71815_INT_BAT_DEAD, 6, BD71815_INT_BAT_DEAD_MASK), + REGMAP_IRQ_REG(BD71815_INT_BAT_SHORTC_RES, 6, BD71815_INT_BAT_SHORTC_RES_MASK), + REGMAP_IRQ_REG(BD71815_INT_BAT_SHORTC_DET, 6, BD71815_INT_BAT_SHORTC_DET_MASK), + REGMAP_IRQ_REG(BD71815_INT_BAT_LOW_VOLT_RES, 6, BD71815_INT_BAT_LOW_VOLT_RES_MASK), + REGMAP_IRQ_REG(BD71815_INT_BAT_LOW_VOLT_DET, 6, BD71815_INT_BAT_LOW_VOLT_DET_MASK), + REGMAP_IRQ_REG(BD71815_INT_BAT_OVER_VOLT_RES, 6, BD71815_INT_BAT_OVER_VOLT_RES_MASK), + REGMAP_IRQ_REG(BD71815_INT_BAT_OVER_VOLT_DET, 6, BD71815_INT_BAT_OVER_VOLT_DET_MASK), + /* Battery Mon 2 */ + REGMAP_IRQ_REG(BD71815_INT_BAT_MON_RES, 7, BD71815_INT_BAT_MON_RES_MASK), + REGMAP_IRQ_REG(BD71815_INT_BAT_MON_DET, 7, BD71815_INT_BAT_MON_DET_MASK), + /* Battery Mon 3 (Coulomb counter) */ + REGMAP_IRQ_REG(BD71815_INT_BAT_CC_MON1, 8, BD71815_INT_BAT_CC_MON1_MASK), + REGMAP_IRQ_REG(BD71815_INT_BAT_CC_MON2, 8, BD71815_INT_BAT_CC_MON2_MASK), + REGMAP_IRQ_REG(BD71815_INT_BAT_CC_MON3, 8, BD71815_INT_BAT_CC_MON3_MASK), + /* Battery Mon 4 */ + REGMAP_IRQ_REG(BD71815_INT_BAT_OVER_CURR_1_RES, 9, BD71815_INT_BAT_OVER_CURR_1_RES_MASK), + REGMAP_IRQ_REG(BD71815_INT_BAT_OVER_CURR_1_DET, 9, BD71815_INT_BAT_OVER_CURR_1_DET_MASK), + REGMAP_IRQ_REG(BD71815_INT_BAT_OVER_CURR_2_RES, 9, BD71815_INT_BAT_OVER_CURR_2_RES_MASK), + REGMAP_IRQ_REG(BD71815_INT_BAT_OVER_CURR_2_DET, 9, BD71815_INT_BAT_OVER_CURR_2_DET_MASK), + REGMAP_IRQ_REG(BD71815_INT_BAT_OVER_CURR_3_RES, 9, BD71815_INT_BAT_OVER_CURR_3_RES_MASK), + REGMAP_IRQ_REG(BD71815_INT_BAT_OVER_CURR_3_DET, 9, BD71815_INT_BAT_OVER_CURR_3_DET_MASK), + /* Temperature */ + REGMAP_IRQ_REG(BD71815_INT_TEMP_BAT_LOW_RES, 10, BD71815_INT_TEMP_BAT_LOW_RES_MASK), + REGMAP_IRQ_REG(BD71815_INT_TEMP_BAT_LOW_DET, 10, BD71815_INT_TEMP_BAT_LOW_DET_MASK), + REGMAP_IRQ_REG(BD71815_INT_TEMP_BAT_HI_RES, 10, BD71815_INT_TEMP_BAT_HI_RES_MASK), + REGMAP_IRQ_REG(BD71815_INT_TEMP_BAT_HI_DET, 10, BD71815_INT_TEMP_BAT_HI_DET_MASK), + REGMAP_IRQ_REG(BD71815_INT_TEMP_CHIP_OVER_125_RES, 10, + BD71815_INT_TEMP_CHIP_OVER_125_RES_MASK), + REGMAP_IRQ_REG(BD71815_INT_TEMP_CHIP_OVER_125_DET, 10, + BD71815_INT_TEMP_CHIP_OVER_125_DET_MASK), + REGMAP_IRQ_REG(BD71815_INT_TEMP_CHIP_OVER_VF_RES, 10, + BD71815_INT_TEMP_CHIP_OVER_VF_RES_MASK), + REGMAP_IRQ_REG(BD71815_INT_TEMP_CHIP_OVER_VF_DET, 10, + BD71815_INT_TEMP_CHIP_OVER_VF_DET_MASK), + /* RTC Alarm */ + REGMAP_IRQ_REG(BD71815_INT_RTC0, 11, BD71815_INT_RTC0_MASK), + REGMAP_IRQ_REG(BD71815_INT_RTC1, 11, BD71815_INT_RTC1_MASK), + REGMAP_IRQ_REG(BD71815_INT_RTC2, 11, BD71815_INT_RTC2_MASK), +}; + static struct regmap_irq bd71828_irqs[] = { REGMAP_IRQ_REG(BD71828_INT_BUCK1_OCP, 0, BD71828_INT_BUCK1_OCP_MASK), REGMAP_IRQ_REG(BD71828_INT_BUCK2_OCP, 0, BD71828_INT_BUCK2_OCP_MASK), @@ -134,10 +331,8 @@ static struct regmap_irq bd71828_irqs[] = { REGMAP_IRQ_REG(BD71828_INT_CLPS_OUT, 1, BD71828_INT_CLPS_OUT_MASK), REGMAP_IRQ_REG(BD71828_INT_CLPS_IN, 1, BD71828_INT_CLPS_IN_MASK), /* DCIN2 interrupts */ - REGMAP_IRQ_REG(BD71828_INT_DCIN_MON_RES, 2, - BD71828_INT_DCIN_MON_RES_MASK), - REGMAP_IRQ_REG(BD71828_INT_DCIN_MON_DET, 2, - BD71828_INT_DCIN_MON_DET_MASK), + REGMAP_IRQ_REG(BD71828_INT_DCIN_MON_RES, 2, BD71828_INT_DCIN_MON_RES_MASK), + REGMAP_IRQ_REG(BD71828_INT_DCIN_MON_DET, 2, BD71828_INT_DCIN_MON_DET_MASK), REGMAP_IRQ_REG(BD71828_INT_LONGPUSH, 2, BD71828_INT_LONGPUSH_MASK), REGMAP_IRQ_REG(BD71828_INT_MIDPUSH, 2, BD71828_INT_MIDPUSH_MASK), REGMAP_IRQ_REG(BD71828_INT_SHORTPUSH, 2, BD71828_INT_SHORTPUSH_MASK), @@ -145,102 +340,59 @@ static struct regmap_irq bd71828_irqs[] = { REGMAP_IRQ_REG(BD71828_INT_WDOG, 2, BD71828_INT_WDOG_MASK), REGMAP_IRQ_REG(BD71828_INT_SWRESET, 2, BD71828_INT_SWRESET_MASK), /* Vsys */ - REGMAP_IRQ_REG(BD71828_INT_VSYS_UV_RES, 3, - BD71828_INT_VSYS_UV_RES_MASK), - REGMAP_IRQ_REG(BD71828_INT_VSYS_UV_DET, 3, - BD71828_INT_VSYS_UV_DET_MASK), - REGMAP_IRQ_REG(BD71828_INT_VSYS_LOW_RES, 3, - BD71828_INT_VSYS_LOW_RES_MASK), - REGMAP_IRQ_REG(BD71828_INT_VSYS_LOW_DET, 3, - BD71828_INT_VSYS_LOW_DET_MASK), - REGMAP_IRQ_REG(BD71828_INT_VSYS_HALL_IN, 3, - BD71828_INT_VSYS_HALL_IN_MASK), - REGMAP_IRQ_REG(BD71828_INT_VSYS_HALL_TOGGLE, 3, - BD71828_INT_VSYS_HALL_TOGGLE_MASK), - REGMAP_IRQ_REG(BD71828_INT_VSYS_MON_RES, 3, - BD71828_INT_VSYS_MON_RES_MASK), - REGMAP_IRQ_REG(BD71828_INT_VSYS_MON_DET, 3, - BD71828_INT_VSYS_MON_DET_MASK), + REGMAP_IRQ_REG(BD71828_INT_VSYS_UV_RES, 3, BD71828_INT_VSYS_UV_RES_MASK), + REGMAP_IRQ_REG(BD71828_INT_VSYS_UV_DET, 3, BD71828_INT_VSYS_UV_DET_MASK), + REGMAP_IRQ_REG(BD71828_INT_VSYS_LOW_RES, 3, BD71828_INT_VSYS_LOW_RES_MASK), + REGMAP_IRQ_REG(BD71828_INT_VSYS_LOW_DET, 3, BD71828_INT_VSYS_LOW_DET_MASK), + REGMAP_IRQ_REG(BD71828_INT_VSYS_HALL_IN, 3, BD71828_INT_VSYS_HALL_IN_MASK), + REGMAP_IRQ_REG(BD71828_INT_VSYS_HALL_TOGGLE, 3, BD71828_INT_VSYS_HALL_TOGGLE_MASK), + REGMAP_IRQ_REG(BD71828_INT_VSYS_MON_RES, 3, BD71828_INT_VSYS_MON_RES_MASK), + REGMAP_IRQ_REG(BD71828_INT_VSYS_MON_DET, 3, BD71828_INT_VSYS_MON_DET_MASK), /* Charger */ - REGMAP_IRQ_REG(BD71828_INT_CHG_DCIN_ILIM, 4, - BD71828_INT_CHG_DCIN_ILIM_MASK), - REGMAP_IRQ_REG(BD71828_INT_CHG_TOPOFF_TO_DONE, 4, - BD71828_INT_CHG_TOPOFF_TO_DONE_MASK), - REGMAP_IRQ_REG(BD71828_INT_CHG_WDG_TEMP, 4, - BD71828_INT_CHG_WDG_TEMP_MASK), - REGMAP_IRQ_REG(BD71828_INT_CHG_WDG_TIME, 4, - BD71828_INT_CHG_WDG_TIME_MASK), - REGMAP_IRQ_REG(BD71828_INT_CHG_RECHARGE_RES, 4, - BD71828_INT_CHG_RECHARGE_RES_MASK), - REGMAP_IRQ_REG(BD71828_INT_CHG_RECHARGE_DET, 4, - BD71828_INT_CHG_RECHARGE_DET_MASK), + REGMAP_IRQ_REG(BD71828_INT_CHG_DCIN_ILIM, 4, BD71828_INT_CHG_DCIN_ILIM_MASK), + REGMAP_IRQ_REG(BD71828_INT_CHG_TOPOFF_TO_DONE, 4, BD71828_INT_CHG_TOPOFF_TO_DONE_MASK), + REGMAP_IRQ_REG(BD71828_INT_CHG_WDG_TEMP, 4, BD71828_INT_CHG_WDG_TEMP_MASK), + REGMAP_IRQ_REG(BD71828_INT_CHG_WDG_TIME, 4, BD71828_INT_CHG_WDG_TIME_MASK), + REGMAP_IRQ_REG(BD71828_INT_CHG_RECHARGE_RES, 4, BD71828_INT_CHG_RECHARGE_RES_MASK), + REGMAP_IRQ_REG(BD71828_INT_CHG_RECHARGE_DET, 4, BD71828_INT_CHG_RECHARGE_DET_MASK), REGMAP_IRQ_REG(BD71828_INT_CHG_RANGED_TEMP_TRANSITION, 4, BD71828_INT_CHG_RANGED_TEMP_TRANSITION_MASK), - REGMAP_IRQ_REG(BD71828_INT_CHG_STATE_TRANSITION, 4, - BD71828_INT_CHG_STATE_TRANSITION_MASK), + REGMAP_IRQ_REG(BD71828_INT_CHG_STATE_TRANSITION, 4, BD71828_INT_CHG_STATE_TRANSITION_MASK), /* Battery */ - REGMAP_IRQ_REG(BD71828_INT_BAT_TEMP_NORMAL, 5, - BD71828_INT_BAT_TEMP_NORMAL_MASK), - REGMAP_IRQ_REG(BD71828_INT_BAT_TEMP_ERANGE, 5, - BD71828_INT_BAT_TEMP_ERANGE_MASK), - REGMAP_IRQ_REG(BD71828_INT_BAT_TEMP_WARN, 5, - BD71828_INT_BAT_TEMP_WARN_MASK), - REGMAP_IRQ_REG(BD71828_INT_BAT_REMOVED, 5, - BD71828_INT_BAT_REMOVED_MASK), - REGMAP_IRQ_REG(BD71828_INT_BAT_DETECTED, 5, - BD71828_INT_BAT_DETECTED_MASK), - REGMAP_IRQ_REG(BD71828_INT_THERM_REMOVED, 5, - BD71828_INT_THERM_REMOVED_MASK), - REGMAP_IRQ_REG(BD71828_INT_THERM_DETECTED, 5, - BD71828_INT_THERM_DETECTED_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_TEMP_NORMAL, 5, BD71828_INT_BAT_TEMP_NORMAL_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_TEMP_ERANGE, 5, BD71828_INT_BAT_TEMP_ERANGE_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_TEMP_WARN, 5, BD71828_INT_BAT_TEMP_WARN_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_REMOVED, 5, BD71828_INT_BAT_REMOVED_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_DETECTED, 5, BD71828_INT_BAT_DETECTED_MASK), + REGMAP_IRQ_REG(BD71828_INT_THERM_REMOVED, 5, BD71828_INT_THERM_REMOVED_MASK), + REGMAP_IRQ_REG(BD71828_INT_THERM_DETECTED, 5, BD71828_INT_THERM_DETECTED_MASK), /* Battery Mon 1 */ REGMAP_IRQ_REG(BD71828_INT_BAT_DEAD, 6, BD71828_INT_BAT_DEAD_MASK), - REGMAP_IRQ_REG(BD71828_INT_BAT_SHORTC_RES, 6, - BD71828_INT_BAT_SHORTC_RES_MASK), - REGMAP_IRQ_REG(BD71828_INT_BAT_SHORTC_DET, 6, - BD71828_INT_BAT_SHORTC_DET_MASK), - REGMAP_IRQ_REG(BD71828_INT_BAT_LOW_VOLT_RES, 6, - BD71828_INT_BAT_LOW_VOLT_RES_MASK), - REGMAP_IRQ_REG(BD71828_INT_BAT_LOW_VOLT_DET, 6, - BD71828_INT_BAT_LOW_VOLT_DET_MASK), - REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_VOLT_RES, 6, - BD71828_INT_BAT_OVER_VOLT_RES_MASK), - REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_VOLT_DET, 6, - BD71828_INT_BAT_OVER_VOLT_DET_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_SHORTC_RES, 6, BD71828_INT_BAT_SHORTC_RES_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_SHORTC_DET, 6, BD71828_INT_BAT_SHORTC_DET_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_LOW_VOLT_RES, 6, BD71828_INT_BAT_LOW_VOLT_RES_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_LOW_VOLT_DET, 6, BD71828_INT_BAT_LOW_VOLT_DET_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_VOLT_RES, 6, BD71828_INT_BAT_OVER_VOLT_RES_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_VOLT_DET, 6, BD71828_INT_BAT_OVER_VOLT_DET_MASK), /* Battery Mon 2 */ - REGMAP_IRQ_REG(BD71828_INT_BAT_MON_RES, 7, - BD71828_INT_BAT_MON_RES_MASK), - REGMAP_IRQ_REG(BD71828_INT_BAT_MON_DET, 7, - BD71828_INT_BAT_MON_DET_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_MON_RES, 7, BD71828_INT_BAT_MON_RES_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_MON_DET, 7, BD71828_INT_BAT_MON_DET_MASK), /* Battery Mon 3 (Coulomb counter) */ - REGMAP_IRQ_REG(BD71828_INT_BAT_CC_MON1, 8, - BD71828_INT_BAT_CC_MON1_MASK), - REGMAP_IRQ_REG(BD71828_INT_BAT_CC_MON2, 8, - BD71828_INT_BAT_CC_MON2_MASK), - REGMAP_IRQ_REG(BD71828_INT_BAT_CC_MON3, 8, - BD71828_INT_BAT_CC_MON3_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_CC_MON1, 8, BD71828_INT_BAT_CC_MON1_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_CC_MON2, 8, BD71828_INT_BAT_CC_MON2_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_CC_MON3, 8, BD71828_INT_BAT_CC_MON3_MASK), /* Battery Mon 4 */ - REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_CURR_1_RES, 9, - BD71828_INT_BAT_OVER_CURR_1_RES_MASK), - REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_CURR_1_DET, 9, - BD71828_INT_BAT_OVER_CURR_1_DET_MASK), - REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_CURR_2_RES, 9, - BD71828_INT_BAT_OVER_CURR_2_RES_MASK), - REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_CURR_2_DET, 9, - BD71828_INT_BAT_OVER_CURR_2_DET_MASK), - REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_CURR_3_RES, 9, - BD71828_INT_BAT_OVER_CURR_3_RES_MASK), - REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_CURR_3_DET, 9, - BD71828_INT_BAT_OVER_CURR_3_DET_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_CURR_1_RES, 9, BD71828_INT_BAT_OVER_CURR_1_RES_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_CURR_1_DET, 9, BD71828_INT_BAT_OVER_CURR_1_DET_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_CURR_2_RES, 9, BD71828_INT_BAT_OVER_CURR_2_RES_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_CURR_2_DET, 9, BD71828_INT_BAT_OVER_CURR_2_DET_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_CURR_3_RES, 9, BD71828_INT_BAT_OVER_CURR_3_RES_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_CURR_3_DET, 9, BD71828_INT_BAT_OVER_CURR_3_DET_MASK), /* Temperature */ - REGMAP_IRQ_REG(BD71828_INT_TEMP_BAT_LOW_RES, 10, - BD71828_INT_TEMP_BAT_LOW_RES_MASK), - REGMAP_IRQ_REG(BD71828_INT_TEMP_BAT_LOW_DET, 10, - BD71828_INT_TEMP_BAT_LOW_DET_MASK), - REGMAP_IRQ_REG(BD71828_INT_TEMP_BAT_HI_RES, 10, - BD71828_INT_TEMP_BAT_HI_RES_MASK), - REGMAP_IRQ_REG(BD71828_INT_TEMP_BAT_HI_DET, 10, - BD71828_INT_TEMP_BAT_HI_DET_MASK), + REGMAP_IRQ_REG(BD71828_INT_TEMP_BAT_LOW_RES, 10, BD71828_INT_TEMP_BAT_LOW_RES_MASK), + REGMAP_IRQ_REG(BD71828_INT_TEMP_BAT_LOW_DET, 10, BD71828_INT_TEMP_BAT_LOW_DET_MASK), + REGMAP_IRQ_REG(BD71828_INT_TEMP_BAT_HI_RES, 10, BD71828_INT_TEMP_BAT_HI_RES_MASK), + REGMAP_IRQ_REG(BD71828_INT_TEMP_BAT_HI_DET, 10, BD71828_INT_TEMP_BAT_HI_DET_MASK), REGMAP_IRQ_REG(BD71828_INT_TEMP_CHIP_OVER_125_RES, 10, BD71828_INT_TEMP_CHIP_OVER_125_RES_MASK), REGMAP_IRQ_REG(BD71828_INT_TEMP_CHIP_OVER_125_DET, 10, @@ -267,57 +419,133 @@ static struct regmap_irq_chip bd71828_irq_chip = { .init_ack_masked = true, .num_regs = 12, .num_main_regs = 1, - .sub_reg_offsets = &bd71828_sub_irq_offsets[0], + .sub_reg_offsets = &bd718xx_sub_irq_offsets[0], + .num_main_status_bits = 8, + .irq_reg_stride = 1, +}; + +static struct regmap_irq_chip bd71815_irq_chip = { + .name = "bd71815_irq", + .main_status = BD71815_REG_INT_STAT, + .irqs = &bd71815_irqs[0], + .num_irqs = ARRAY_SIZE(bd71815_irqs), + .status_base = BD71815_REG_INT_STAT_01, + .mask_base = BD71815_REG_INT_EN_01, + .ack_base = BD71815_REG_INT_STAT_01, + .mask_invert = true, + .init_ack_masked = true, + .num_regs = 12, + .num_main_regs = 1, + .sub_reg_offsets = &bd718xx_sub_irq_offsets[0], .num_main_status_bits = 8, .irq_reg_stride = 1, }; +static int set_clk_mode(struct device *dev, struct regmap *regmap, + int clkmode_reg) +{ + int ret; + unsigned int open_drain; + + ret = of_property_read_u32(dev->of_node, "rohm,clkout-open-drain", &open_drain); + if (ret) { + if (ret == -EINVAL) + return 0; + return ret; + } + if (open_drain > 1) { + dev_err(dev, "bad clk32kout mode configuration"); + return -EINVAL; + } + + if (open_drain) + return regmap_update_bits(regmap, clkmode_reg, OUT32K_MODE, + OUT32K_MODE_OPEN_DRAIN); + + return regmap_update_bits(regmap, clkmode_reg, OUT32K_MODE, + OUT32K_MODE_CMOS); +} + static int bd71828_i2c_probe(struct i2c_client *i2c) { - struct rohm_regmap_dev *chip; struct regmap_irq_chip_data *irq_data; int ret; + struct regmap *regmap; + const struct regmap_config *regmap_config; + struct regmap_irq_chip *irqchip; + unsigned int chip_type; + struct mfd_cell *mfd; + int cells; + int button_irq; + int clkmode_reg; if (!i2c->irq) { dev_err(&i2c->dev, "No IRQ configured\n"); return -EINVAL; } - chip = devm_kzalloc(&i2c->dev, sizeof(*chip), GFP_KERNEL); - if (!chip) - return -ENOMEM; - - dev_set_drvdata(&i2c->dev, chip); + chip_type = (unsigned int)(uintptr_t) + of_device_get_match_data(&i2c->dev); + switch (chip_type) { + case ROHM_CHIP_TYPE_BD71828: + mfd = bd71828_mfd_cells; + cells = ARRAY_SIZE(bd71828_mfd_cells); + regmap_config = &bd71828_regmap; + irqchip = &bd71828_irq_chip; + clkmode_reg = BD71828_REG_OUT32K; + button_irq = BD71828_INT_SHORTPUSH; + break; + case ROHM_CHIP_TYPE_BD71815: + mfd = bd71815_mfd_cells; + cells = ARRAY_SIZE(bd71815_mfd_cells); + regmap_config = &bd71815_regmap; + irqchip = &bd71815_irq_chip; + clkmode_reg = BD71815_REG_OUT32K; + /* + * If BD71817 support is needed we should be able to handle it + * with proper DT configs + BD71815 drivers + power-button. + * BD71815 data-sheet does not list the power-button IRQ so we + * don't use it. + */ + button_irq = 0; + break; + default: + dev_err(&i2c->dev, "Unknown device type"); + return -EINVAL; + } - chip->regmap = devm_regmap_init_i2c(i2c, &bd71828_regmap); - if (IS_ERR(chip->regmap)) { + regmap = devm_regmap_init_i2c(i2c, regmap_config); + if (IS_ERR(regmap)) { dev_err(&i2c->dev, "Failed to initialize Regmap\n"); - return PTR_ERR(chip->regmap); + return PTR_ERR(regmap); } - ret = devm_regmap_add_irq_chip(&i2c->dev, chip->regmap, - i2c->irq, IRQF_ONESHOT, 0, - &bd71828_irq_chip, &irq_data); + ret = devm_regmap_add_irq_chip(&i2c->dev, regmap, i2c->irq, + IRQF_ONESHOT, 0, irqchip, &irq_data); if (ret) { dev_err(&i2c->dev, "Failed to add IRQ chip\n"); return ret; } dev_dbg(&i2c->dev, "Registered %d IRQs for chip\n", - bd71828_irq_chip.num_irqs); + irqchip->num_irqs); - ret = regmap_irq_get_virq(irq_data, BD71828_INT_SHORTPUSH); - if (ret < 0) { - dev_err(&i2c->dev, "Failed to get the power-key IRQ\n"); - return ret; + if (button_irq) { + ret = regmap_irq_get_virq(irq_data, button_irq); + if (ret < 0) { + dev_err(&i2c->dev, "Failed to get the power-key IRQ\n"); + return ret; + } + + button.irq = ret; } - button.irq = ret; + ret = set_clk_mode(&i2c->dev, regmap, clkmode_reg); + if (ret) + return ret; - ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO, - bd71828_mfd_cells, - ARRAY_SIZE(bd71828_mfd_cells), NULL, 0, - regmap_irq_get_domain(irq_data)); + ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO, mfd, cells, + NULL, 0, regmap_irq_get_domain(irq_data)); if (ret) dev_err(&i2c->dev, "Failed to create subdevices\n"); @@ -325,7 +553,13 @@ static int bd71828_i2c_probe(struct i2c_client *i2c) } static const struct of_device_id bd71828_of_match[] = { - { .compatible = "rohm,bd71828", }, + { + .compatible = "rohm,bd71828", + .data = (void *)ROHM_CHIP_TYPE_BD71828, + }, { + .compatible = "rohm,bd71815", + .data = (void *)ROHM_CHIP_TYPE_BD71815, + }, { }, }; MODULE_DEVICE_TABLE(of, bd71828_of_match); diff --git a/drivers/mfd/rohm-bd718x7.c b/drivers/mfd/rohm-bd718x7.c index c32c1b6c98fa..bfd81f78beae 100644 --- a/drivers/mfd/rohm-bd718x7.c +++ b/drivers/mfd/rohm-bd718x7.c @@ -91,9 +91,9 @@ static const struct regmap_config bd718xx_regmap_config = { .cache_type = REGCACHE_RBTREE, }; -static int bd718xx_init_press_duration(struct bd718xx *bd718xx) +static int bd718xx_init_press_duration(struct regmap *regmap, + struct device *dev) { - struct device* dev = bd718xx->chip.dev; u32 short_press_ms, long_press_ms; u32 short_press_value, long_press_value; int ret; @@ -102,8 +102,7 @@ static int bd718xx_init_press_duration(struct bd718xx *bd718xx) &short_press_ms); if (!ret) { short_press_value = min(15u, (short_press_ms + 250) / 500); - ret = regmap_update_bits(bd718xx->chip.regmap, - BD718XX_REG_PWRONCONFIG0, + ret = regmap_update_bits(regmap, BD718XX_REG_PWRONCONFIG0, BD718XX_PWRBTN_PRESS_DURATION_MASK, short_press_value); if (ret) { @@ -116,8 +115,7 @@ static int bd718xx_init_press_duration(struct bd718xx *bd718xx) &long_press_ms); if (!ret) { long_press_value = min(15u, (long_press_ms + 500) / 1000); - ret = regmap_update_bits(bd718xx->chip.regmap, - BD718XX_REG_PWRONCONFIG1, + ret = regmap_update_bits(regmap, BD718XX_REG_PWRONCONFIG1, BD718XX_PWRBTN_PRESS_DURATION_MASK, long_press_value); if (ret) { @@ -132,7 +130,8 @@ static int bd718xx_init_press_duration(struct bd718xx *bd718xx) static int bd718xx_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { - struct bd718xx *bd718xx; + struct regmap *regmap; + struct regmap_irq_chip_data *irq_data; int ret; unsigned int chip_type; struct mfd_cell *mfd; @@ -142,13 +141,6 @@ static int bd718xx_i2c_probe(struct i2c_client *i2c, dev_err(&i2c->dev, "No IRQ configured\n"); return -EINVAL; } - - bd718xx = devm_kzalloc(&i2c->dev, sizeof(struct bd718xx), GFP_KERNEL); - - if (!bd718xx) - return -ENOMEM; - - bd718xx->chip_irq = i2c->irq; chip_type = (unsigned int)(uintptr_t) of_device_get_match_data(&i2c->dev); switch (chip_type) { @@ -164,29 +156,26 @@ static int bd718xx_i2c_probe(struct i2c_client *i2c, dev_err(&i2c->dev, "Unknown device type"); return -EINVAL; } - bd718xx->chip.dev = &i2c->dev; - dev_set_drvdata(&i2c->dev, bd718xx); - bd718xx->chip.regmap = devm_regmap_init_i2c(i2c, - &bd718xx_regmap_config); - if (IS_ERR(bd718xx->chip.regmap)) { + regmap = devm_regmap_init_i2c(i2c, &bd718xx_regmap_config); + if (IS_ERR(regmap)) { dev_err(&i2c->dev, "regmap initialization failed\n"); - return PTR_ERR(bd718xx->chip.regmap); + return PTR_ERR(regmap); } - ret = devm_regmap_add_irq_chip(&i2c->dev, bd718xx->chip.regmap, - bd718xx->chip_irq, IRQF_ONESHOT, 0, - &bd718xx_irq_chip, &bd718xx->irq_data); + ret = devm_regmap_add_irq_chip(&i2c->dev, regmap, i2c->irq, + IRQF_ONESHOT, 0, &bd718xx_irq_chip, + &irq_data); if (ret) { dev_err(&i2c->dev, "Failed to add irq_chip\n"); return ret; } - ret = bd718xx_init_press_duration(bd718xx); + ret = bd718xx_init_press_duration(regmap, &i2c->dev); if (ret) return ret; - ret = regmap_irq_get_virq(bd718xx->irq_data, BD718XX_INT_PWRBTN_S); + ret = regmap_irq_get_virq(irq_data, BD718XX_INT_PWRBTN_S); if (ret < 0) { dev_err(&i2c->dev, "Failed to get the IRQ\n"); @@ -195,9 +184,9 @@ static int bd718xx_i2c_probe(struct i2c_client *i2c, button.irq = ret; - ret = devm_mfd_add_devices(bd718xx->chip.dev, PLATFORM_DEVID_AUTO, + ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO, mfd, cells, NULL, 0, - regmap_irq_get_domain(bd718xx->irq_data)); + regmap_irq_get_domain(irq_data)); if (ret) dev_err(&i2c->dev, "Failed to create subdevices\n"); diff --git a/drivers/mfd/rohm-bd9576.c b/drivers/mfd/rohm-bd9576.c new file mode 100644 index 000000000000..6661a27d69a8 --- /dev/null +++ b/drivers/mfd/rohm-bd9576.c @@ -0,0 +1,189 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2021 ROHM Semiconductors + * + * ROHM BD9576MUF and BD9573MUF PMIC driver + */ + +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/irq.h> +#include <linux/mfd/core.h> +#include <linux/mfd/rohm-bd957x.h> +#include <linux/mfd/rohm-generic.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/regmap.h> +#include <linux/types.h> + +enum { + BD957X_REGULATOR_CELL, + BD957X_WDT_CELL, +}; + +/* + * Due to the BD9576MUF nasty IRQ behaiour we don't always populate IRQs. + * These will be added to regulator resources only if IRQ information for the + * PMIC is populated in device-tree. + */ +static const struct resource bd9576_regulator_irqs[] = { + DEFINE_RES_IRQ_NAMED(BD9576_INT_THERM, "bd9576-temp"), + DEFINE_RES_IRQ_NAMED(BD9576_INT_OVD, "bd9576-ovd"), + DEFINE_RES_IRQ_NAMED(BD9576_INT_UVD, "bd9576-uvd"), +}; + +static struct mfd_cell bd9573_mfd_cells[] = { + [BD957X_REGULATOR_CELL] = { .name = "bd9573-regulator", }, + [BD957X_WDT_CELL] = { .name = "bd9576-wdt", }, +}; + +static struct mfd_cell bd9576_mfd_cells[] = { + [BD957X_REGULATOR_CELL] = { .name = "bd9576-regulator", }, + [BD957X_WDT_CELL] = { .name = "bd9576-wdt", }, +}; + +static const struct regmap_range volatile_ranges[] = { + regmap_reg_range(BD957X_REG_SMRB_ASSERT, BD957X_REG_SMRB_ASSERT), + regmap_reg_range(BD957X_REG_PMIC_INTERNAL_STAT, + BD957X_REG_PMIC_INTERNAL_STAT), + regmap_reg_range(BD957X_REG_INT_THERM_STAT, BD957X_REG_INT_THERM_STAT), + regmap_reg_range(BD957X_REG_INT_OVP_STAT, BD957X_REG_INT_SYS_STAT), + regmap_reg_range(BD957X_REG_INT_MAIN_STAT, BD957X_REG_INT_MAIN_STAT), +}; + +static const struct regmap_access_table volatile_regs = { + .yes_ranges = &volatile_ranges[0], + .n_yes_ranges = ARRAY_SIZE(volatile_ranges), +}; + +static struct regmap_config bd957x_regmap = { + .reg_bits = 8, + .val_bits = 8, + .volatile_table = &volatile_regs, + .max_register = BD957X_MAX_REGISTER, + .cache_type = REGCACHE_RBTREE, +}; + +static struct regmap_irq bd9576_irqs[] = { + REGMAP_IRQ_REG(BD9576_INT_THERM, 0, BD957X_MASK_INT_MAIN_THERM), + REGMAP_IRQ_REG(BD9576_INT_OVP, 0, BD957X_MASK_INT_MAIN_OVP), + REGMAP_IRQ_REG(BD9576_INT_SCP, 0, BD957X_MASK_INT_MAIN_SCP), + REGMAP_IRQ_REG(BD9576_INT_OCP, 0, BD957X_MASK_INT_MAIN_OCP), + REGMAP_IRQ_REG(BD9576_INT_OVD, 0, BD957X_MASK_INT_MAIN_OVD), + REGMAP_IRQ_REG(BD9576_INT_UVD, 0, BD957X_MASK_INT_MAIN_UVD), + REGMAP_IRQ_REG(BD9576_INT_UVP, 0, BD957X_MASK_INT_MAIN_UVP), + REGMAP_IRQ_REG(BD9576_INT_SYS, 0, BD957X_MASK_INT_MAIN_SYS), +}; + +static struct regmap_irq_chip bd9576_irq_chip = { + .name = "bd9576_irq", + .irqs = &bd9576_irqs[0], + .num_irqs = ARRAY_SIZE(bd9576_irqs), + .status_base = BD957X_REG_INT_MAIN_STAT, + .mask_base = BD957X_REG_INT_MAIN_MASK, + .ack_base = BD957X_REG_INT_MAIN_STAT, + .init_ack_masked = true, + .num_regs = 1, + .irq_reg_stride = 1, +}; + +static int bd957x_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + int ret; + struct regmap *regmap; + struct mfd_cell *cells; + int num_cells; + unsigned long chip_type; + struct irq_domain *domain; + bool usable_irqs; + + chip_type = (unsigned long)of_device_get_match_data(&i2c->dev); + + switch (chip_type) { + case ROHM_CHIP_TYPE_BD9576: + cells = bd9576_mfd_cells; + num_cells = ARRAY_SIZE(bd9576_mfd_cells); + usable_irqs = !!i2c->irq; + break; + case ROHM_CHIP_TYPE_BD9573: + cells = bd9573_mfd_cells; + num_cells = ARRAY_SIZE(bd9573_mfd_cells); + /* + * BD9573 only supports fatal IRQs which we can not handle + * because SoC is going to lose the power. + */ + usable_irqs = false; + break; + default: + dev_err(&i2c->dev, "Unknown device type"); + return -EINVAL; + } + + regmap = devm_regmap_init_i2c(i2c, &bd957x_regmap); + if (IS_ERR(regmap)) { + dev_err(&i2c->dev, "Failed to initialize Regmap\n"); + return PTR_ERR(regmap); + } + + /* + * BD9576 behaves badly. It kepts IRQ line asserted for the whole + * duration of detected HW condition (like over temperature). So we + * don't require IRQ to be populated. + * If IRQ information is not given, then we mask all IRQs and do not + * provide IRQ resources to regulator driver - which then just omits + * the notifiers. + */ + if (usable_irqs) { + struct regmap_irq_chip_data *irq_data; + struct mfd_cell *regulators; + + regulators = &bd9576_mfd_cells[BD957X_REGULATOR_CELL]; + regulators->resources = bd9576_regulator_irqs; + regulators->num_resources = ARRAY_SIZE(bd9576_regulator_irqs); + + ret = devm_regmap_add_irq_chip(&i2c->dev, regmap, i2c->irq, + IRQF_ONESHOT, 0, + &bd9576_irq_chip, &irq_data); + if (ret) { + dev_err(&i2c->dev, "Failed to add IRQ chip\n"); + return ret; + } + domain = regmap_irq_get_domain(irq_data); + } else { + ret = regmap_update_bits(regmap, BD957X_REG_INT_MAIN_MASK, + BD957X_MASK_INT_ALL, + BD957X_MASK_INT_ALL); + if (ret) + return ret; + domain = NULL; + } + + ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO, cells, + num_cells, NULL, 0, domain); + if (ret) + dev_err(&i2c->dev, "Failed to create subdevices\n"); + + return ret; +} + +static const struct of_device_id bd957x_of_match[] = { + { .compatible = "rohm,bd9576", .data = (void *)ROHM_CHIP_TYPE_BD9576, }, + { .compatible = "rohm,bd9573", .data = (void *)ROHM_CHIP_TYPE_BD9573, }, + { }, +}; +MODULE_DEVICE_TABLE(of, bd957x_of_match); + +static struct i2c_driver bd957x_drv = { + .driver = { + .name = "rohm-bd957x", + .of_match_table = bd957x_of_match, + }, + .probe = &bd957x_i2c_probe, +}; +module_i2c_driver(bd957x_drv); + +MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>"); +MODULE_DESCRIPTION("ROHM BD9576MUF and BD9573MUF Power Management IC driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c index 95473ff9bb4b..8d55992da19e 100644 --- a/drivers/mfd/sec-core.c +++ b/drivers/mfd/sec-core.c @@ -549,19 +549,7 @@ static struct i2c_driver sec_pmic_driver = { .shutdown = sec_pmic_shutdown, .id_table = sec_pmic_id, }; - -static int __init sec_pmic_init(void) -{ - return i2c_add_driver(&sec_pmic_driver); -} - -subsys_initcall(sec_pmic_init); - -static void __exit sec_pmic_exit(void) -{ - i2c_del_driver(&sec_pmic_driver); -} -module_exit(sec_pmic_exit); +module_i2c_driver(sec_pmic_driver); MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>"); MODULE_DESCRIPTION("Core support for the S5M MFD"); diff --git a/drivers/mfd/stm32-timers.c b/drivers/mfd/stm32-timers.c index add603359124..44ed2fce0319 100644 --- a/drivers/mfd/stm32-timers.c +++ b/drivers/mfd/stm32-timers.c @@ -158,13 +158,18 @@ static const struct regmap_config stm32_timers_regmap_cfg = { static void stm32_timers_get_arr_size(struct stm32_timers *ddata) { + u32 arr; + + /* Backup ARR to restore it after getting the maximum value */ + regmap_read(ddata->regmap, TIM_ARR, &arr); + /* * Only the available bits will be written so when readback * we get the maximum value of auto reload register */ regmap_write(ddata->regmap, TIM_ARR, ~0L); regmap_read(ddata->regmap, TIM_ARR, &ddata->max_arr); - regmap_write(ddata->regmap, TIM_ARR, 0x0); + regmap_write(ddata->regmap, TIM_ARR, arr); } static int stm32_timers_dma_probe(struct device *dev, diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c index 90f3292230c9..1dd39483e7c1 100644 --- a/drivers/mfd/stmpe.c +++ b/drivers/mfd/stmpe.c @@ -312,7 +312,7 @@ EXPORT_SYMBOL_GPL(stmpe_set_altfunc); * GPIO (all variants) */ -static const struct resource stmpe_gpio_resources[] = { +static struct resource stmpe_gpio_resources[] = { /* Start and end filled dynamically */ { .flags = IORESOURCE_IRQ, @@ -336,7 +336,8 @@ static const struct mfd_cell stmpe_gpio_cell_noirq = { * Keypad (1601, 2401, 2403) */ -static const struct resource stmpe_keypad_resources[] = { +static struct resource stmpe_keypad_resources[] = { + /* Start and end filled dynamically */ { .name = "KEYPAD", .flags = IORESOURCE_IRQ, @@ -357,7 +358,8 @@ static const struct mfd_cell stmpe_keypad_cell = { /* * PWM (1601, 2401, 2403) */ -static const struct resource stmpe_pwm_resources[] = { +static struct resource stmpe_pwm_resources[] = { + /* Start and end filled dynamically */ { .name = "PWM0", .flags = IORESOURCE_IRQ, @@ -445,7 +447,8 @@ static struct stmpe_variant_info stmpe801_noirq = { * Touchscreen (STMPE811 or STMPE610) */ -static const struct resource stmpe_ts_resources[] = { +static struct resource stmpe_ts_resources[] = { + /* Start and end filled dynamically */ { .name = "TOUCH_DET", .flags = IORESOURCE_IRQ, @@ -467,7 +470,8 @@ static const struct mfd_cell stmpe_ts_cell = { * ADC (STMPE811) */ -static const struct resource stmpe_adc_resources[] = { +static struct resource stmpe_adc_resources[] = { + /* Start and end filled dynamically */ { .name = "STMPE_TEMP_SENS", .flags = IORESOURCE_IRQ, diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig index 43d9f1884cd3..d3371ac7b871 100644 --- a/drivers/pwm/Kconfig +++ b/drivers/pwm/Kconfig @@ -393,6 +393,14 @@ config PWM_MXS To compile this driver as a module, choose M here: the module will be called pwm-mxs. +config PWM_NTXEC + tristate "Netronix embedded controller PWM support" + depends on MFD_NTXEC + help + Say yes here if you want to support the PWM output of the embedded + controller found in certain e-book readers designed by the original + design manufacturer Netronix. + config PWM_OMAP_DMTIMER tristate "OMAP Dual-Mode Timer PWM support" depends on OF diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile index 211db810c439..d3879619bd76 100644 --- a/drivers/pwm/Makefile +++ b/drivers/pwm/Makefile @@ -35,6 +35,7 @@ obj-$(CONFIG_PWM_MESON) += pwm-meson.o obj-$(CONFIG_PWM_MEDIATEK) += pwm-mediatek.o obj-$(CONFIG_PWM_MTK_DISP) += pwm-mtk-disp.o obj-$(CONFIG_PWM_MXS) += pwm-mxs.o +obj-$(CONFIG_PWM_NTXEC) += pwm-ntxec.o obj-$(CONFIG_PWM_OMAP_DMTIMER) += pwm-omap-dmtimer.o obj-$(CONFIG_PWM_PCA9685) += pwm-pca9685.o obj-$(CONFIG_PWM_PXA) += pwm-pxa.o diff --git a/drivers/pwm/pwm-ntxec.c b/drivers/pwm/pwm-ntxec.c new file mode 100644 index 000000000000..50c454c553c4 --- /dev/null +++ b/drivers/pwm/pwm-ntxec.c @@ -0,0 +1,184 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * The Netronix embedded controller is a microcontroller found in some + * e-book readers designed by the original design manufacturer Netronix, Inc. + * It contains RTC, battery monitoring, system power management, and PWM + * functionality. + * + * This driver implements PWM output. + * + * Copyright 2020 Jonathan Neuschäfer <j.neuschaefer@gmx.net> + * + * Limitations: + * - The get_state callback is not implemented, because the current state of + * the PWM output can't be read back from the hardware. + * - The hardware can only generate normal polarity output. + * - The period and duty cycle can't be changed together in one atomic action. + */ + +#include <linux/mfd/ntxec.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pwm.h> +#include <linux/regmap.h> +#include <linux/types.h> + +struct ntxec_pwm { + struct device *dev; + struct ntxec *ec; + struct pwm_chip chip; +}; + +static struct ntxec_pwm *ntxec_pwm_from_chip(struct pwm_chip *chip) +{ + return container_of(chip, struct ntxec_pwm, chip); +} + +#define NTXEC_REG_AUTO_OFF_HI 0xa1 +#define NTXEC_REG_AUTO_OFF_LO 0xa2 +#define NTXEC_REG_ENABLE 0xa3 +#define NTXEC_REG_PERIOD_LOW 0xa4 +#define NTXEC_REG_PERIOD_HIGH 0xa5 +#define NTXEC_REG_DUTY_LOW 0xa6 +#define NTXEC_REG_DUTY_HIGH 0xa7 + +/* + * The time base used in the EC is 8MHz, or 125ns. Period and duty cycle are + * measured in this unit. + */ +#define TIME_BASE_NS 125 + +/* + * The maximum input value (in nanoseconds) is determined by the time base and + * the range of the hardware registers that hold the converted value. + * It fits into 32 bits, so we can do our calculations in 32 bits as well. + */ +#define MAX_PERIOD_NS (TIME_BASE_NS * 0xffff) + +static int ntxec_pwm_set_raw_period_and_duty_cycle(struct pwm_chip *chip, + int period, int duty) +{ + struct ntxec_pwm *priv = ntxec_pwm_from_chip(chip); + + /* + * Changes to the period and duty cycle take effect as soon as the + * corresponding low byte is written, so the hardware may be configured + * to an inconsistent state after the period is written and before the + * duty cycle is fully written. If, in such a case, the old duty cycle + * is longer than the new period, the EC may output 100% for a moment. + * + * To minimize the time between the changes to period and duty cycle + * taking effect, the writes are interleaved. + */ + + struct reg_sequence regs[] = { + { NTXEC_REG_PERIOD_HIGH, ntxec_reg8(period >> 8) }, + { NTXEC_REG_DUTY_HIGH, ntxec_reg8(duty >> 8) }, + { NTXEC_REG_PERIOD_LOW, ntxec_reg8(period) }, + { NTXEC_REG_DUTY_LOW, ntxec_reg8(duty) }, + }; + + return regmap_multi_reg_write(priv->ec->regmap, regs, ARRAY_SIZE(regs)); +} + +static int ntxec_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm_dev, + const struct pwm_state *state) +{ + struct ntxec_pwm *priv = ntxec_pwm_from_chip(chip); + unsigned int period, duty; + int res; + + if (state->polarity != PWM_POLARITY_NORMAL) + return -EINVAL; + + period = min_t(u64, state->period, MAX_PERIOD_NS); + duty = min_t(u64, state->duty_cycle, period); + + period /= TIME_BASE_NS; + duty /= TIME_BASE_NS; + + /* + * Writing a duty cycle of zero puts the device into a state where + * writing a higher duty cycle doesn't result in the brightness that it + * usually results in. This can be fixed by cycling the ENABLE register. + * + * As a workaround, write ENABLE=0 when the duty cycle is zero. + * The case that something has previously set the duty cycle to zero + * but ENABLE=1, is not handled. + */ + if (state->enabled && duty != 0) { + res = ntxec_pwm_set_raw_period_and_duty_cycle(chip, period, duty); + if (res) + return res; + + res = regmap_write(priv->ec->regmap, NTXEC_REG_ENABLE, ntxec_reg8(1)); + if (res) + return res; + + /* Disable the auto-off timer */ + res = regmap_write(priv->ec->regmap, NTXEC_REG_AUTO_OFF_HI, ntxec_reg8(0xff)); + if (res) + return res; + + return regmap_write(priv->ec->regmap, NTXEC_REG_AUTO_OFF_LO, ntxec_reg8(0xff)); + } else { + return regmap_write(priv->ec->regmap, NTXEC_REG_ENABLE, ntxec_reg8(0)); + } +} + +static const struct pwm_ops ntxec_pwm_ops = { + .owner = THIS_MODULE, + .apply = ntxec_pwm_apply, + /* + * No .get_state callback, because the current state cannot be read + * back from the hardware. + */ +}; + +static int ntxec_pwm_probe(struct platform_device *pdev) +{ + struct ntxec *ec = dev_get_drvdata(pdev->dev.parent); + struct ntxec_pwm *priv; + struct pwm_chip *chip; + + pdev->dev.of_node = pdev->dev.parent->of_node; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->ec = ec; + priv->dev = &pdev->dev; + + platform_set_drvdata(pdev, priv); + + chip = &priv->chip; + chip->dev = &pdev->dev; + chip->ops = &ntxec_pwm_ops; + chip->base = -1; + chip->npwm = 1; + + return pwmchip_add(chip); +} + +static int ntxec_pwm_remove(struct platform_device *pdev) +{ + struct ntxec_pwm *priv = platform_get_drvdata(pdev); + struct pwm_chip *chip = &priv->chip; + + return pwmchip_remove(chip); +} + +static struct platform_driver ntxec_pwm_driver = { + .driver = { + .name = "ntxec-pwm", + }, + .probe = ntxec_pwm_probe, + .remove = ntxec_pwm_remove, +}; +module_platform_driver(ntxec_pwm_driver); + +MODULE_AUTHOR("Jonathan Neuschäfer <j.neuschaefer@gmx.net>"); +MODULE_DESCRIPTION("PWM driver for Netronix EC"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:ntxec-pwm"); diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index ea1d284741cb..9d84d9245490 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -204,6 +204,17 @@ config REGULATOR_BD70528 This driver can also be built as a module. If so, the module will be called bd70528-regulator. +config REGULATOR_BD71815 + tristate "ROHM BD71815 Power Regulator" + depends on MFD_ROHM_BD71828 + help + This driver supports voltage regulators on ROHM BD71815 PMIC. + This will enable support for the software controllable buck + and LDO regulators and a current regulator for LEDs. + + This driver can also be built as a module. If so, the module + will be called bd71815-regulator. + config REGULATOR_BD71828 tristate "ROHM BD71828 Power Regulator" depends on MFD_ROHM_BD71828 diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 11c145886c98..580b015296ea 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_REGULATOR_ATC260X) += atc260x-regulator.o obj-$(CONFIG_REGULATOR_AXP20X) += axp20x-regulator.o obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o obj-$(CONFIG_REGULATOR_BD70528) += bd70528-regulator.o +obj-$(CONFIG_REGULATOR_BD71815) += bd71815-regulator.o obj-$(CONFIG_REGULATOR_BD71828) += bd71828-regulator.o obj-$(CONFIG_REGULATOR_BD718XX) += bd718x7-regulator.o obj-$(CONFIG_REGULATOR_BD9571MWV) += bd9571mwv-regulator.o diff --git a/drivers/regulator/bd71815-regulator.c b/drivers/regulator/bd71815-regulator.c new file mode 100644 index 000000000000..a4e8d5e36b40 --- /dev/null +++ b/drivers/regulator/bd71815-regulator.c @@ -0,0 +1,652 @@ +// SPDX-License-Identifier: GPL-2.0-only +// +// Copyright 2014 Embest Technology Co. Ltd. Inc. +// bd71815-regulator.c ROHM BD71815 regulator driver +// +// Author: Tony Luo <luofc@embedinfo.com> +// +// Partially rewritten at 2021 by +// Matti Vaittinen <matti.vaitinen@fi.rohmeurope.com> + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/gpio.h> +#include <linux/mfd/rohm-generic.h> +#include <linux/mfd/rohm-bd71815.h> +#include <linux/regulator/of_regulator.h> + +struct bd71815_regulator { + struct regulator_desc desc; + const struct rohm_dvs_config *dvs; +}; + +struct bd71815_pmic { + struct bd71815_regulator descs[BD71815_REGULATOR_CNT]; + struct regmap *regmap; + struct device *dev; + struct gpio_descs *gps; + struct regulator_dev *rdev[BD71815_REGULATOR_CNT]; +}; + +static const int bd7181x_wled_currents[] = { + 10, 20, 30, 50, 70, 100, 200, 300, 500, 700, 1000, 2000, 3000, 4000, + 5000, 6000, 7000, 8000, 9000, 10000, 11000, 12000, 13000, 14000, 15000, + 16000, 17000, 18000, 19000, 20000, 21000, 22000, 23000, 24000, 25000, +}; + +static const struct rohm_dvs_config buck1_dvs = { + .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS | + ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR, + .run_reg = BD71815_REG_BUCK1_VOLT_H, + .run_mask = BD71815_VOLT_MASK, + .run_on_mask = BD71815_BUCK_RUN_ON, + .snvs_on_mask = BD71815_BUCK_SNVS_ON, + .suspend_reg = BD71815_REG_BUCK1_VOLT_L, + .suspend_mask = BD71815_VOLT_MASK, + .suspend_on_mask = BD71815_BUCK_SUSP_ON, + .lpsr_reg = BD71815_REG_BUCK1_VOLT_L, + .lpsr_mask = BD71815_VOLT_MASK, + .lpsr_on_mask = BD71815_BUCK_LPSR_ON, +}; + +static const struct rohm_dvs_config buck2_dvs = { + .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS | + ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR, + .run_reg = BD71815_REG_BUCK2_VOLT_H, + .run_mask = BD71815_VOLT_MASK, + .run_on_mask = BD71815_BUCK_RUN_ON, + .snvs_on_mask = BD71815_BUCK_SNVS_ON, + .suspend_reg = BD71815_REG_BUCK2_VOLT_L, + .suspend_mask = BD71815_VOLT_MASK, + .suspend_on_mask = BD71815_BUCK_SUSP_ON, + .lpsr_reg = BD71815_REG_BUCK2_VOLT_L, + .lpsr_mask = BD71815_VOLT_MASK, + .lpsr_on_mask = BD71815_BUCK_LPSR_ON, +}; + +static const struct rohm_dvs_config buck3_dvs = { + .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS | + ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR, + .run_reg = BD71815_REG_BUCK3_VOLT, + .run_mask = BD71815_VOLT_MASK, + .run_on_mask = BD71815_BUCK_RUN_ON, + .snvs_on_mask = BD71815_BUCK_SNVS_ON, + .suspend_on_mask = BD71815_BUCK_SUSP_ON, + .lpsr_on_mask = BD71815_BUCK_LPSR_ON, +}; + +static const struct rohm_dvs_config buck4_dvs = { + .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS | + ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR, + .run_reg = BD71815_REG_BUCK4_VOLT, + .run_mask = BD71815_VOLT_MASK, + .run_on_mask = BD71815_BUCK_RUN_ON, + .snvs_on_mask = BD71815_BUCK_SNVS_ON, + .suspend_on_mask = BD71815_BUCK_SUSP_ON, + .lpsr_on_mask = BD71815_BUCK_LPSR_ON, +}; + +static const struct rohm_dvs_config ldo1_dvs = { + .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS | + ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR, + .run_reg = BD71815_REG_LDO_MODE1, + .run_mask = BD71815_VOLT_MASK, + .run_on_mask = LDO1_RUN_ON, + .snvs_on_mask = LDO1_SNVS_ON, + .suspend_on_mask = LDO1_SUSP_ON, + .lpsr_on_mask = LDO1_LPSR_ON, +}; + +static const struct rohm_dvs_config ldo2_dvs = { + .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS | + ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR, + .run_reg = BD71815_REG_LDO_MODE2, + .run_mask = BD71815_VOLT_MASK, + .run_on_mask = LDO2_RUN_ON, + .snvs_on_mask = LDO2_SNVS_ON, + .suspend_on_mask = LDO2_SUSP_ON, + .lpsr_on_mask = LDO2_LPSR_ON, +}; + +static const struct rohm_dvs_config ldo3_dvs = { + .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS | + ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR, + .run_reg = BD71815_REG_LDO_MODE2, + .run_mask = BD71815_VOLT_MASK, + .run_on_mask = LDO3_RUN_ON, + .snvs_on_mask = LDO3_SNVS_ON, + .suspend_on_mask = LDO3_SUSP_ON, + .lpsr_on_mask = LDO3_LPSR_ON, +}; + +static const struct rohm_dvs_config ldo4_dvs = { + .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS | + ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR, + .run_reg = BD71815_REG_LDO_MODE3, + .run_mask = BD71815_VOLT_MASK, + .run_on_mask = LDO4_RUN_ON, + .snvs_on_mask = LDO4_SNVS_ON, + .suspend_on_mask = LDO4_SUSP_ON, + .lpsr_on_mask = LDO4_LPSR_ON, +}; + +static const struct rohm_dvs_config ldo5_dvs = { + .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS | + ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR, + .run_reg = BD71815_REG_LDO_MODE3, + .run_mask = BD71815_VOLT_MASK, + .run_on_mask = LDO5_RUN_ON, + .snvs_on_mask = LDO5_SNVS_ON, + .suspend_on_mask = LDO5_SUSP_ON, + .lpsr_on_mask = LDO5_LPSR_ON, +}; + +static const struct rohm_dvs_config dvref_dvs = { + .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS | + ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR, + .run_on_mask = DVREF_RUN_ON, + .snvs_on_mask = DVREF_SNVS_ON, + .suspend_on_mask = DVREF_SUSP_ON, + .lpsr_on_mask = DVREF_LPSR_ON, +}; + +static const struct rohm_dvs_config ldolpsr_dvs = { + .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS | + ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR, + .run_on_mask = DVREF_RUN_ON, + .snvs_on_mask = DVREF_SNVS_ON, + .suspend_on_mask = DVREF_SUSP_ON, + .lpsr_on_mask = DVREF_LPSR_ON, +}; + +static const struct rohm_dvs_config buck5_dvs = { + .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS | + ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR, + .run_reg = BD71815_REG_BUCK5_VOLT, + .run_mask = BD71815_VOLT_MASK, + .run_on_mask = BD71815_BUCK_RUN_ON, + .snvs_on_mask = BD71815_BUCK_SNVS_ON, + .suspend_on_mask = BD71815_BUCK_SUSP_ON, + .lpsr_on_mask = BD71815_BUCK_LPSR_ON, +}; + +static int set_hw_dvs_levels(struct device_node *np, + const struct regulator_desc *desc, + struct regulator_config *cfg) +{ + struct bd71815_regulator *data; + + data = container_of(desc, struct bd71815_regulator, desc); + return rohm_regulator_set_dvs_levels(data->dvs, np, desc, cfg->regmap); +} + +/* + * Bucks 1 and 2 have two voltage selection registers where selected + * voltage can be set. Which of the registers is used can be either controlled + * by a control bit in register - or by HW state. If HW state specific voltages + * are given - then we assume HW state based control should be used. + * + * If volatge value is updated to currently selected register - then output + * voltage is immediately changed no matter what is set as ramp rate. Thus we + * default changing voltage by writing new value to inactive register and + * then updating the 'register selection' bit. This naturally only works when + * HW state machine is not used to select the voltage. + */ +static int buck12_set_hw_dvs_levels(struct device_node *np, + const struct regulator_desc *desc, + struct regulator_config *cfg) +{ + struct bd71815_regulator *data; + int ret = 0, val; + + data = container_of(desc, struct bd71815_regulator, desc); + + if (of_find_property(np, "rohm,dvs-run-voltage", NULL) || + of_find_property(np, "rohm,dvs-suspend-voltage", NULL) || + of_find_property(np, "rohm,dvs-lpsr-voltage", NULL) || + of_find_property(np, "rohm,dvs-snvs-voltage", NULL)) { + ret = regmap_read(cfg->regmap, desc->vsel_reg, &val); + if (ret) + return ret; + + if (!(BD71815_BUCK_STBY_DVS & val) && + !(BD71815_BUCK_DVSSEL & val)) { + int val2; + + /* + * We are currently using voltage from _L. + * We'd better copy it to _H and switch to it to + * avoid shutting us down if LPSR or SUSPEND is set to + * disabled. _L value is at reg _H + 1 + */ + ret = regmap_read(cfg->regmap, desc->vsel_reg + 1, + &val2); + if (ret) + return ret; + + ret = regmap_update_bits(cfg->regmap, desc->vsel_reg, + BD71815_VOLT_MASK | + BD71815_BUCK_DVSSEL, + val2 | BD71815_BUCK_DVSSEL); + if (ret) + return ret; + } + ret = rohm_regulator_set_dvs_levels(data->dvs, np, desc, + cfg->regmap); + if (ret) + return ret; + /* + * DVS levels were given => use HW-state machine for voltage + * controls. NOTE: AFAIK, This means that if voltage is changed + * by SW the ramp-rate is not respected. Should we disable + * SW voltage control when the HW state machine is used? + */ + ret = regmap_update_bits(cfg->regmap, desc->vsel_reg, + BD71815_BUCK_STBY_DVS, + BD71815_BUCK_STBY_DVS); + } + + return ret; +} + +/* + * BUCK1/2 + * BUCK1RAMPRATE[1:0] BUCK1 DVS ramp rate setting + * 00: 10.00mV/usec 10mV 1uS + * 01: 5.00mV/usec 10mV 2uS + * 10: 2.50mV/usec 10mV 4uS + * 11: 1.25mV/usec 10mV 8uS + */ +static const unsigned int bd7181x_ramp_table[] = { 1250, 2500, 5000, 10000 }; + +static int bd7181x_led_set_current_limit(struct regulator_dev *rdev, + int min_uA, int max_uA) +{ + int ret; + int onstatus; + + onstatus = regulator_is_enabled_regmap(rdev); + + ret = regulator_set_current_limit_regmap(rdev, min_uA, max_uA); + if (!ret) { + int newstatus; + + newstatus = regulator_is_enabled_regmap(rdev); + if (onstatus != newstatus) { + /* + * HW FIX: spurious led status change detected. Toggle + * state as a workaround + */ + if (onstatus) + ret = regulator_enable_regmap(rdev); + else + ret = regulator_disable_regmap(rdev); + + if (ret) + dev_err(rdev_get_dev(rdev), + "failed to revert the LED state (%d)\n", + ret); + } + } + + return ret; +} + +static int bd7181x_buck12_get_voltage_sel(struct regulator_dev *rdev) +{ + struct bd71815_pmic *pmic = rdev_get_drvdata(rdev); + int rid = rdev_get_id(rdev); + int ret, regh, regl, val; + + regh = BD71815_REG_BUCK1_VOLT_H + rid * 0x2; + regl = BD71815_REG_BUCK1_VOLT_L + rid * 0x2; + + ret = regmap_read(pmic->regmap, regh, &val); + if (ret) + return ret; + + /* + * If we use HW state machine based voltage reg selection - then we + * return BD71815_REG_BUCK1_VOLT_H which is used at RUN. + * Else we do return the BD71815_REG_BUCK1_VOLT_H or + * BD71815_REG_BUCK1_VOLT_L depending on which is selected to be used + * by BD71815_BUCK_DVSSEL bit + */ + if ((!(val & BD71815_BUCK_STBY_DVS)) && (!(val & BD71815_BUCK_DVSSEL))) + ret = regmap_read(pmic->regmap, regl, &val); + + if (ret) + return ret; + + return val & BD71815_VOLT_MASK; +} + +/* + * For Buck 1/2. + */ +static int bd7181x_buck12_set_voltage_sel(struct regulator_dev *rdev, + unsigned int sel) +{ + struct bd71815_pmic *pmic = rdev_get_drvdata(rdev); + int rid = rdev_get_id(rdev); + int ret, val, reg, regh, regl; + + regh = BD71815_REG_BUCK1_VOLT_H + rid*0x2; + regl = BD71815_REG_BUCK1_VOLT_L + rid*0x2; + + ret = regmap_read(pmic->regmap, regh, &val); + if (ret) + return ret; + + /* + * If bucks 1 & 2 are controlled by state machine - then the RUN state + * voltage is set to BD71815_REG_BUCK1_VOLT_H. Changing SUSPEND/LPSR + * voltages at runtime is not supported by this driver. + */ + if (((val & BD71815_BUCK_STBY_DVS))) { + return regmap_update_bits(pmic->regmap, regh, BD71815_VOLT_MASK, + sel); + } + /* Update new voltage to the register which is not selected now */ + if (val & BD71815_BUCK_DVSSEL) + reg = regl; + else + reg = regh; + + ret = regmap_update_bits(pmic->regmap, reg, BD71815_VOLT_MASK, sel); + if (ret) + return ret; + + /* Select the other DVS register to be used */ + return regmap_update_bits(pmic->regmap, regh, BD71815_BUCK_DVSSEL, ~val); +} + +static const struct regulator_ops bd7181x_ldo_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, +}; + +static const struct regulator_ops bd7181x_fixed_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear, +}; + +static const struct regulator_ops bd7181x_buck_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, +}; + +static const struct regulator_ops bd7181x_buck12_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear, + .set_voltage_sel = bd7181x_buck12_set_voltage_sel, + .get_voltage_sel = bd7181x_buck12_get_voltage_sel, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .set_ramp_delay = regulator_set_ramp_delay_regmap, +}; + +static const struct regulator_ops bd7181x_led_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_current_limit = bd7181x_led_set_current_limit, + .get_current_limit = regulator_get_current_limit_regmap, +}; + +#define BD71815_FIXED_REG(_name, _id, ereg, emsk, voltage, _dvs) \ + [(_id)] = { \ + .desc = { \ + .name = #_name, \ + .of_match = of_match_ptr(#_name), \ + .regulators_node = of_match_ptr("regulators"), \ + .n_voltages = 1, \ + .ops = &bd7181x_fixed_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = (_id), \ + .owner = THIS_MODULE, \ + .min_uV = (voltage), \ + .enable_reg = (ereg), \ + .enable_mask = (emsk), \ + .of_parse_cb = set_hw_dvs_levels, \ + }, \ + .dvs = (_dvs), \ + } + +#define BD71815_BUCK_REG(_name, _id, vsel, ereg, min, max, step, _dvs) \ + [(_id)] = { \ + .desc = { \ + .name = #_name, \ + .of_match = of_match_ptr(#_name), \ + .regulators_node = of_match_ptr("regulators"), \ + .n_voltages = ((max) - (min)) / (step) + 1, \ + .ops = &bd7181x_buck_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = (_id), \ + .owner = THIS_MODULE, \ + .min_uV = (min), \ + .uV_step = (step), \ + .vsel_reg = (vsel), \ + .vsel_mask = BD71815_VOLT_MASK, \ + .enable_reg = (ereg), \ + .enable_mask = BD71815_BUCK_RUN_ON, \ + .of_parse_cb = set_hw_dvs_levels, \ + }, \ + .dvs = (_dvs), \ + } + +#define BD71815_BUCK12_REG(_name, _id, vsel, ereg, min, max, step, \ + _dvs) \ + [(_id)] = { \ + .desc = { \ + .name = #_name, \ + .of_match = of_match_ptr(#_name), \ + .regulators_node = of_match_ptr("regulators"), \ + .n_voltages = ((max) - (min)) / (step) + 1, \ + .ops = &bd7181x_buck12_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = (_id), \ + .owner = THIS_MODULE, \ + .min_uV = (min), \ + .uV_step = (step), \ + .vsel_reg = (vsel), \ + .vsel_mask = 0x3f, \ + .enable_reg = (ereg), \ + .enable_mask = 0x04, \ + .ramp_reg = (ereg), \ + .ramp_mask = BD71815_BUCK_RAMPRATE_MASK, \ + .ramp_delay_table = bd7181x_ramp_table, \ + .n_ramp_values = ARRAY_SIZE(bd7181x_ramp_table),\ + .of_parse_cb = buck12_set_hw_dvs_levels, \ + }, \ + .dvs = (_dvs), \ + } + +#define BD71815_LED_REG(_name, _id, csel, mask, ereg, emsk, currents) \ + [(_id)] = { \ + .desc = { \ + .name = #_name, \ + .of_match = of_match_ptr(#_name), \ + .regulators_node = of_match_ptr("regulators"), \ + .n_current_limits = ARRAY_SIZE(currents), \ + .ops = &bd7181x_led_regulator_ops, \ + .type = REGULATOR_CURRENT, \ + .id = (_id), \ + .owner = THIS_MODULE, \ + .curr_table = currents, \ + .csel_reg = (csel), \ + .csel_mask = (mask), \ + .enable_reg = (ereg), \ + .enable_mask = (emsk), \ + }, \ + } + +#define BD71815_LDO_REG(_name, _id, vsel, ereg, emsk, min, max, step, \ + _dvs) \ + [(_id)] = { \ + .desc = { \ + .name = #_name, \ + .of_match = of_match_ptr(#_name), \ + .regulators_node = of_match_ptr("regulators"), \ + .n_voltages = ((max) - (min)) / (step) + 1, \ + .ops = &bd7181x_ldo_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = (_id), \ + .owner = THIS_MODULE, \ + .min_uV = (min), \ + .uV_step = (step), \ + .vsel_reg = (vsel), \ + .vsel_mask = BD71815_VOLT_MASK, \ + .enable_reg = (ereg), \ + .enable_mask = (emsk), \ + .of_parse_cb = set_hw_dvs_levels, \ + }, \ + .dvs = (_dvs), \ + } + +static struct bd71815_regulator bd71815_regulators[] = { + BD71815_BUCK12_REG(buck1, BD71815_BUCK1, BD71815_REG_BUCK1_VOLT_H, + BD71815_REG_BUCK1_MODE, 800000, 2000000, 25000, + &buck1_dvs), + BD71815_BUCK12_REG(buck2, BD71815_BUCK2, BD71815_REG_BUCK2_VOLT_H, + BD71815_REG_BUCK2_MODE, 800000, 2000000, 25000, + &buck2_dvs), + BD71815_BUCK_REG(buck3, BD71815_BUCK3, BD71815_REG_BUCK3_VOLT, + BD71815_REG_BUCK3_MODE, 1200000, 2700000, 50000, + &buck3_dvs), + BD71815_BUCK_REG(buck4, BD71815_BUCK4, BD71815_REG_BUCK4_VOLT, + BD71815_REG_BUCK4_MODE, 1100000, 1850000, 25000, + &buck4_dvs), + BD71815_BUCK_REG(buck5, BD71815_BUCK5, BD71815_REG_BUCK5_VOLT, + BD71815_REG_BUCK5_MODE, 1800000, 3300000, 50000, + &buck5_dvs), + BD71815_LDO_REG(ldo1, BD71815_LDO1, BD71815_REG_LDO1_VOLT, + BD71815_REG_LDO_MODE1, LDO1_RUN_ON, 800000, 3300000, + 50000, &ldo1_dvs), + BD71815_LDO_REG(ldo2, BD71815_LDO2, BD71815_REG_LDO2_VOLT, + BD71815_REG_LDO_MODE2, LDO2_RUN_ON, 800000, 3300000, + 50000, &ldo2_dvs), + /* + * Let's default LDO3 to be enabled by SW. We can override ops if DT + * says LDO3 should be enabled by HW when DCIN is connected. + */ + BD71815_LDO_REG(ldo3, BD71815_LDO3, BD71815_REG_LDO3_VOLT, + BD71815_REG_LDO_MODE2, LDO3_RUN_ON, 800000, 3300000, + 50000, &ldo3_dvs), + BD71815_LDO_REG(ldo4, BD71815_LDO4, BD71815_REG_LDO4_VOLT, + BD71815_REG_LDO_MODE3, LDO4_RUN_ON, 800000, 3300000, + 50000, &ldo4_dvs), + BD71815_LDO_REG(ldo5, BD71815_LDO5, BD71815_REG_LDO5_VOLT_H, + BD71815_REG_LDO_MODE3, LDO5_RUN_ON, 800000, 3300000, + 50000, &ldo5_dvs), + BD71815_FIXED_REG(ldodvref, BD71815_LDODVREF, BD71815_REG_LDO_MODE4, + DVREF_RUN_ON, 3000000, &dvref_dvs), + BD71815_FIXED_REG(ldolpsr, BD71815_LDOLPSR, BD71815_REG_LDO_MODE4, + LDO_LPSR_RUN_ON, 1800000, &ldolpsr_dvs), + BD71815_LED_REG(wled, BD71815_WLED, BD71815_REG_LED_DIMM, LED_DIMM_MASK, + BD71815_REG_LED_CTRL, LED_RUN_ON, + bd7181x_wled_currents), +}; + +static int bd7181x_probe(struct platform_device *pdev) +{ + struct bd71815_pmic *pmic; + struct regulator_config config = {}; + int i, ret; + struct gpio_desc *ldo4_en; + + pmic = devm_kzalloc(&pdev->dev, sizeof(*pmic), GFP_KERNEL); + if (!pmic) + return -ENOMEM; + + memcpy(pmic->descs, bd71815_regulators, sizeof(pmic->descs)); + + pmic->dev = &pdev->dev; + pmic->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!pmic->regmap) { + dev_err(pmic->dev, "No parent regmap\n"); + return -ENODEV; + } + platform_set_drvdata(pdev, pmic); + ldo4_en = devm_gpiod_get_from_of_node(&pdev->dev, + pdev->dev.parent->of_node, + "rohm,vsel-gpios", 0, + GPIOD_ASIS, "ldo4-en"); + + if (IS_ERR(ldo4_en)) { + ret = PTR_ERR(ldo4_en); + if (ret != -ENOENT) + return ret; + ldo4_en = NULL; + } + + /* Disable to go to ship-mode */ + ret = regmap_update_bits(pmic->regmap, BD71815_REG_PWRCTRL, + RESTARTEN, 0); + if (ret) + return ret; + + config.dev = pdev->dev.parent; + config.regmap = pmic->regmap; + + for (i = 0; i < BD71815_REGULATOR_CNT; i++) { + struct regulator_desc *desc; + struct regulator_dev *rdev; + + desc = &pmic->descs[i].desc; + if (i == BD71815_LDO4) + config.ena_gpiod = ldo4_en; + + config.driver_data = pmic; + + rdev = devm_regulator_register(&pdev->dev, desc, &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, + "failed to register %s regulator\n", + desc->name); + return PTR_ERR(rdev); + } + config.ena_gpiod = NULL; + pmic->rdev[i] = rdev; + } + return 0; +} + +static const struct platform_device_id bd7181x_pmic_id[] = { + { "bd71815-pmic", ROHM_CHIP_TYPE_BD71815 }, + { }, +}; +MODULE_DEVICE_TABLE(platform, bd7181x_pmic_id); + +static struct platform_driver bd7181x_regulator = { + .driver = { + .name = "bd7181x-pmic", + .owner = THIS_MODULE, + }, + .probe = bd7181x_probe, + .id_table = bd7181x_pmic_id, +}; +module_platform_driver(bd7181x_regulator); + +MODULE_AUTHOR("Tony Luo <luofc@embedinfo.com>"); +MODULE_DESCRIPTION("BD71815 voltage regulator driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:bd7181x-pmic"); diff --git a/drivers/regulator/bd71828-regulator.c b/drivers/regulator/bd71828-regulator.c index 6b12e963ed8f..a4f09a5a30ca 100644 --- a/drivers/regulator/bd71828-regulator.c +++ b/drivers/regulator/bd71828-regulator.c @@ -90,38 +90,7 @@ static const struct linear_range bd71828_ldo_volts[] = { REGULATOR_LINEAR_RANGE(3300000, 0x32, 0x3f, 0), }; -static int bd71828_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) -{ - unsigned int val; - - switch (ramp_delay) { - case 1 ... 2500: - val = 0; - break; - case 2501 ... 5000: - val = 1; - break; - case 5001 ... 10000: - val = 2; - break; - case 10001 ... 20000: - val = 3; - break; - default: - val = 3; - dev_err(&rdev->dev, - "ramp_delay: %d not supported, setting 20mV/uS", - ramp_delay); - } - - /* - * On BD71828 the ramp delay level control reg is at offset +2 to - * enable reg - */ - return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg + 2, - BD71828_MASK_RAMP_DELAY, - val << (ffs(BD71828_MASK_RAMP_DELAY) - 1)); -} +static const unsigned int bd71828_ramp_delay[] = { 2500, 5000, 10000, 20000 }; static int buck_set_hw_dvs_levels(struct device_node *np, const struct regulator_desc *desc, @@ -185,7 +154,7 @@ static const struct regulator_ops bd71828_dvs_buck_ops = { .set_voltage_sel = regulator_set_voltage_sel_regmap, .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_time_sel = regulator_set_voltage_time_sel, - .set_ramp_delay = bd71828_set_ramp_delay, + .set_ramp_delay = regulator_set_ramp_delay_regmap, }; static const struct regulator_ops bd71828_ldo_ops = { @@ -219,6 +188,10 @@ static const struct bd71828_regulator_data bd71828_rdata[] = { .enable_mask = BD71828_MASK_RUN_EN, .vsel_reg = BD71828_REG_BUCK1_VOLT, .vsel_mask = BD71828_MASK_BUCK1267_VOLT, + .ramp_delay_table = bd71828_ramp_delay, + .n_ramp_values = ARRAY_SIZE(bd71828_ramp_delay), + .ramp_reg = BD71828_REG_BUCK1_MODE, + .ramp_mask = BD71828_MASK_RAMP_DELAY, .owner = THIS_MODULE, .of_parse_cb = buck_set_hw_dvs_levels, }, @@ -261,6 +234,10 @@ static const struct bd71828_regulator_data bd71828_rdata[] = { .enable_mask = BD71828_MASK_RUN_EN, .vsel_reg = BD71828_REG_BUCK2_VOLT, .vsel_mask = BD71828_MASK_BUCK1267_VOLT, + .ramp_delay_table = bd71828_ramp_delay, + .n_ramp_values = ARRAY_SIZE(bd71828_ramp_delay), + .ramp_reg = BD71828_REG_BUCK2_MODE, + .ramp_mask = BD71828_MASK_RAMP_DELAY, .owner = THIS_MODULE, .of_parse_cb = buck_set_hw_dvs_levels, }, @@ -421,6 +398,10 @@ static const struct bd71828_regulator_data bd71828_rdata[] = { .enable_mask = BD71828_MASK_RUN_EN, .vsel_reg = BD71828_REG_BUCK6_VOLT, .vsel_mask = BD71828_MASK_BUCK1267_VOLT, + .ramp_delay_table = bd71828_ramp_delay, + .n_ramp_values = ARRAY_SIZE(bd71828_ramp_delay), + .ramp_reg = BD71828_REG_BUCK6_MODE, + .ramp_mask = BD71828_MASK_RAMP_DELAY, .owner = THIS_MODULE, .of_parse_cb = buck_set_hw_dvs_levels, }, @@ -458,6 +439,10 @@ static const struct bd71828_regulator_data bd71828_rdata[] = { .enable_mask = BD71828_MASK_RUN_EN, .vsel_reg = BD71828_REG_BUCK7_VOLT, .vsel_mask = BD71828_MASK_BUCK1267_VOLT, + .ramp_delay_table = bd71828_ramp_delay, + .n_ramp_values = ARRAY_SIZE(bd71828_ramp_delay), + .ramp_reg = BD71828_REG_BUCK7_MODE, + .ramp_mask = BD71828_MASK_RAMP_DELAY, .owner = THIS_MODULE, .of_parse_cb = buck_set_hw_dvs_levels, }, diff --git a/drivers/regulator/bd718x7-regulator.c b/drivers/regulator/bd718x7-regulator.c index 8ff47ea522d6..e61295b30503 100644 --- a/drivers/regulator/bd718x7-regulator.c +++ b/drivers/regulator/bd718x7-regulator.c @@ -86,37 +86,7 @@ static const struct regulator_ops BD718XX_HWOPNAME(name) = { \ * 10: 2.50mV/usec 10mV 4uS * 11: 1.25mV/usec 10mV 8uS */ -static int bd718xx_buck1234_set_ramp_delay(struct regulator_dev *rdev, - int ramp_delay) -{ - int id = rdev_get_id(rdev); - unsigned int ramp_value; - - dev_dbg(&rdev->dev, "Buck[%d] Set Ramp = %d\n", id + 1, - ramp_delay); - switch (ramp_delay) { - case 1 ... 1250: - ramp_value = BUCK_RAMPRATE_1P25MV; - break; - case 1251 ... 2500: - ramp_value = BUCK_RAMPRATE_2P50MV; - break; - case 2501 ... 5000: - ramp_value = BUCK_RAMPRATE_5P00MV; - break; - case 5001 ... 10000: - ramp_value = BUCK_RAMPRATE_10P00MV; - break; - default: - ramp_value = BUCK_RAMPRATE_10P00MV; - dev_err(&rdev->dev, - "%s: ramp_delay: %d not supported, setting 10000mV//us\n", - rdev->desc->name, ramp_delay); - } - - return regmap_update_bits(rdev->regmap, BD718XX_REG_BUCK1_CTRL + id, - BUCK_RAMPRATE_MASK, ramp_value << 6); -} +static const unsigned int bd718xx_ramp_delay[] = { 10000, 5000, 2500, 1250 }; /* These functions are used when regulators are under HW state machine control. * We assume PMIC is in RUN state because SW running and able to query the @@ -378,7 +348,7 @@ static const struct regulator_ops bd71837_buck34_ops_hwctrl = { .set_voltage_sel = regulator_set_voltage_sel_regmap, .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_time_sel = regulator_set_voltage_time_sel, - .set_ramp_delay = bd718xx_buck1234_set_ramp_delay, + .set_ramp_delay = regulator_set_ramp_delay_regmap, }; /* @@ -387,7 +357,7 @@ static const struct regulator_ops bd71837_buck34_ops_hwctrl = { BD718XX_OPS(bd718xx_dvs_buck_regulator_ops, regulator_list_voltage_linear_range, NULL, regulator_set_voltage_sel_regmap, regulator_get_voltage_sel_regmap, regulator_set_voltage_time_sel, - bd718xx_buck1234_set_ramp_delay); + /* bd718xx_buck1234_set_ramp_delay */ regulator_set_ramp_delay_regmap); /* * BD71837 BUCK1/2/3/4 @@ -645,6 +615,10 @@ static struct bd718xx_regulator_data bd71847_regulators[] = { .enable_mask = BD718XX_BUCK_EN, .enable_time = BD71847_BUCK1_STARTUP_TIME, .owner = THIS_MODULE, + .ramp_delay_table = bd718xx_ramp_delay, + .n_ramp_values = ARRAY_SIZE(bd718xx_ramp_delay), + .ramp_reg = BD718XX_REG_BUCK1_CTRL, + .ramp_mask = BUCK_RAMPRATE_MASK, .of_parse_cb = buck_set_hw_dvs_levels, }, .dvs = { @@ -678,6 +652,10 @@ static struct bd718xx_regulator_data bd71847_regulators[] = { .enable_reg = BD718XX_REG_BUCK2_CTRL, .enable_mask = BD718XX_BUCK_EN, .enable_time = BD71847_BUCK2_STARTUP_TIME, + .ramp_delay_table = bd718xx_ramp_delay, + .n_ramp_values = ARRAY_SIZE(bd718xx_ramp_delay), + .ramp_reg = BD718XX_REG_BUCK2_CTRL, + .ramp_mask = BUCK_RAMPRATE_MASK, .owner = THIS_MODULE, .of_parse_cb = buck_set_hw_dvs_levels, }, @@ -985,6 +963,10 @@ static struct bd718xx_regulator_data bd71837_regulators[] = { .enable_reg = BD718XX_REG_BUCK1_CTRL, .enable_mask = BD718XX_BUCK_EN, .enable_time = BD71837_BUCK1_STARTUP_TIME, + .ramp_delay_table = bd718xx_ramp_delay, + .n_ramp_values = ARRAY_SIZE(bd718xx_ramp_delay), + .ramp_reg = BD718XX_REG_BUCK1_CTRL, + .ramp_mask = BUCK_RAMPRATE_MASK, .owner = THIS_MODULE, .of_parse_cb = buck_set_hw_dvs_levels, }, @@ -1019,6 +1001,10 @@ static struct bd718xx_regulator_data bd71837_regulators[] = { .enable_reg = BD718XX_REG_BUCK2_CTRL, .enable_mask = BD718XX_BUCK_EN, .enable_time = BD71837_BUCK2_STARTUP_TIME, + .ramp_delay_table = bd718xx_ramp_delay, + .n_ramp_values = ARRAY_SIZE(bd718xx_ramp_delay), + .ramp_reg = BD718XX_REG_BUCK2_CTRL, + .ramp_mask = BUCK_RAMPRATE_MASK, .owner = THIS_MODULE, .of_parse_cb = buck_set_hw_dvs_levels, }, @@ -1050,6 +1036,10 @@ static struct bd718xx_regulator_data bd71837_regulators[] = { .enable_reg = BD71837_REG_BUCK3_CTRL, .enable_mask = BD718XX_BUCK_EN, .enable_time = BD71837_BUCK3_STARTUP_TIME, + .ramp_delay_table = bd718xx_ramp_delay, + .n_ramp_values = ARRAY_SIZE(bd718xx_ramp_delay), + .ramp_reg = BD71837_REG_BUCK3_CTRL, + .ramp_mask = BUCK_RAMPRATE_MASK, .owner = THIS_MODULE, .of_parse_cb = buck_set_hw_dvs_levels, }, @@ -1079,6 +1069,10 @@ static struct bd718xx_regulator_data bd71837_regulators[] = { .enable_reg = BD71837_REG_BUCK4_CTRL, .enable_mask = BD718XX_BUCK_EN, .enable_time = BD71837_BUCK4_STARTUP_TIME, + .ramp_delay_table = bd718xx_ramp_delay, + .n_ramp_values = ARRAY_SIZE(bd718xx_ramp_delay), + .ramp_reg = BD71837_REG_BUCK4_CTRL, + .ramp_mask = BUCK_RAMPRATE_MASK, .owner = THIS_MODULE, .of_parse_cb = buck_set_hw_dvs_levels, }, diff --git a/drivers/regulator/rohm-regulator.c b/drivers/regulator/rohm-regulator.c index 5c558b153d55..6e0d9c08ec1c 100644 --- a/drivers/regulator/rohm-regulator.c +++ b/drivers/regulator/rohm-regulator.c @@ -22,13 +22,26 @@ static int set_dvs_level(const struct regulator_desc *desc, return ret; return 0; } - + /* If voltage is set to 0 => disable */ if (uv == 0) { if (omask) return regmap_update_bits(regmap, oreg, omask, 0); } + /* Some setups don't allow setting own voltage but do allow enabling */ + if (!mask) { + if (omask) + return regmap_update_bits(regmap, oreg, omask, omask); + + return -EINVAL; + } for (i = 0; i < desc->n_voltages; i++) { - ret = regulator_desc_list_voltage_linear_range(desc, i); + /* NOTE to next hacker - Does not support pickable ranges */ + if (desc->linear_range_selectors) + return -EINVAL; + if (desc->n_linear_ranges) + ret = regulator_desc_list_voltage_linear_range(desc, i); + else + ret = regulator_desc_list_voltage_linear(desc, i); if (ret < 0) continue; if (ret == uv) { @@ -82,6 +95,12 @@ int rohm_regulator_set_dvs_levels(const struct rohm_dvs_config *dvs, mask = dvs->lpsr_mask; omask = dvs->lpsr_on_mask; break; + case ROHM_DVS_LEVEL_SNVS: + prop = "rohm,dvs-snvs-voltage"; + reg = dvs->snvs_reg; + mask = dvs->snvs_mask; + omask = dvs->snvs_on_mask; + break; default: return -EINVAL; } diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index ce723dc54aa4..773386b4aeb7 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -501,11 +501,11 @@ config RTC_DRV_M41T80_WDT watchdog timer in the ST M41T60 and M41T80 RTC chips series. config RTC_DRV_BD70528 - tristate "ROHM BD70528 PMIC RTC" - depends on MFD_ROHM_BD70528 && (BD70528_WATCHDOG || !BD70528_WATCHDOG) + tristate "ROHM BD70528, BD71815 and BD71828 PMIC RTC" + depends on MFD_ROHM_BD71828 || MFD_ROHM_BD70528 && (BD70528_WATCHDOG || !BD70528_WATCHDOG) help If you say Y here you will get support for the RTC - block on ROHM BD70528 and BD71828 Power Management IC. + block on ROHM BD70528, BD71815 and BD71828 Power Management IC. This driver can also be built as a module. If so, the module will be called rtc-bd70528. @@ -1296,6 +1296,14 @@ config RTC_DRV_CROS_EC This driver can also be built as a module. If so, the module will be called rtc-cros-ec. +config RTC_DRV_NTXEC + tristate "Netronix embedded controller RTC" + depends on MFD_NTXEC + help + Say yes here if you want to support the RTC functionality of the + embedded controller found in certain e-book readers designed by the + original design manufacturer Netronix. + comment "on-CPU RTC drivers" config RTC_DRV_ASM9260 diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 4e930183c170..2dd0dd956b0e 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -108,6 +108,7 @@ obj-$(CONFIG_RTC_DRV_MT7622) += rtc-mt7622.o obj-$(CONFIG_RTC_DRV_MV) += rtc-mv.o obj-$(CONFIG_RTC_DRV_MXC) += rtc-mxc.o obj-$(CONFIG_RTC_DRV_MXC_V2) += rtc-mxc_v2.o +obj-$(CONFIG_RTC_DRV_NTXEC) += rtc-ntxec.o obj-$(CONFIG_RTC_DRV_OMAP) += rtc-omap.o obj-$(CONFIG_RTC_DRV_OPAL) += rtc-opal.o obj-$(CONFIG_RTC_DRV_PALMAS) += rtc-palmas.o diff --git a/drivers/rtc/rtc-bd70528.c b/drivers/rtc/rtc-bd70528.c index 17cb67f5bf6e..6454afca02a6 100644 --- a/drivers/rtc/rtc-bd70528.c +++ b/drivers/rtc/rtc-bd70528.c @@ -6,6 +6,7 @@ #include <linux/bcd.h> #include <linux/mfd/rohm-bd70528.h> +#include <linux/mfd/rohm-bd71815.h> #include <linux/mfd/rohm-bd71828.h> #include <linux/module.h> #include <linux/of.h> @@ -14,6 +15,12 @@ #include <linux/rtc.h> /* + * On BD71828 and BD71815 the ALM0 MASK is 14 bytes after the ALM0 + * block start + */ +#define BD718XX_ALM_EN_OFFSET 14 + +/* * We read regs RTC_SEC => RTC_YEAR * this struct is ordered according to chip registers. * Keep it u8 only (or packed) to avoid padding issues. @@ -52,8 +59,10 @@ struct bd70528_rtc_alm { struct bd70528_rtc { struct rohm_regmap_dev *parent; + struct regmap *regmap; struct device *dev; u8 reg_time_start; + u8 bd718xx_alm_block_start; bool has_rtc_timers; }; @@ -234,10 +243,9 @@ static int bd71828_set_alarm(struct device *dev, struct rtc_wkalrm *a) int ret; struct bd71828_rtc_alm alm; struct bd70528_rtc *r = dev_get_drvdata(dev); - struct rohm_regmap_dev *parent = r->parent; - ret = regmap_bulk_read(parent->regmap, BD71828_REG_RTC_ALM_START, - &alm, sizeof(alm)); + ret = regmap_bulk_read(r->regmap, r->bd718xx_alm_block_start, &alm, + sizeof(alm)); if (ret) { dev_err(dev, "Failed to read alarm regs\n"); return ret; @@ -250,8 +258,8 @@ static int bd71828_set_alarm(struct device *dev, struct rtc_wkalrm *a) else alm.alm_mask |= BD70528_MASK_ALM_EN; - ret = regmap_bulk_write(parent->regmap, BD71828_REG_RTC_ALM_START, - &alm, sizeof(alm)); + ret = regmap_bulk_write(r->regmap, r->bd718xx_alm_block_start, &alm, + sizeof(alm)); if (ret) dev_err(dev, "Failed to set alarm time\n"); @@ -265,17 +273,16 @@ static int bd70528_set_alarm(struct device *dev, struct rtc_wkalrm *a) struct bd70528_rtc_alm alm; int ret; struct bd70528_rtc *r = dev_get_drvdata(dev); - struct rohm_regmap_dev *parent = r->parent; - ret = regmap_bulk_read(parent->regmap, BD70528_REG_RTC_WAKE_START, - &wake, sizeof(wake)); + ret = regmap_bulk_read(r->regmap, BD70528_REG_RTC_WAKE_START, &wake, + sizeof(wake)); if (ret) { dev_err(dev, "Failed to read wake regs\n"); return ret; } - ret = regmap_bulk_read(parent->regmap, BD70528_REG_RTC_ALM_START, - &alm, sizeof(alm)); + ret = regmap_bulk_read(r->regmap, BD70528_REG_RTC_ALM_START, &alm, + sizeof(alm)); if (ret) { dev_err(dev, "Failed to read alarm regs\n"); return ret; @@ -292,15 +299,14 @@ static int bd70528_set_alarm(struct device *dev, struct rtc_wkalrm *a) wake.ctrl &= ~BD70528_MASK_WAKE_EN; } - ret = regmap_bulk_write(parent->regmap, - BD70528_REG_RTC_WAKE_START, &wake, + ret = regmap_bulk_write(r->regmap, BD70528_REG_RTC_WAKE_START, &wake, sizeof(wake)); if (ret) { dev_err(dev, "Failed to set wake time\n"); return ret; } - ret = regmap_bulk_write(parent->regmap, BD70528_REG_RTC_ALM_START, - &alm, sizeof(alm)); + ret = regmap_bulk_write(r->regmap, BD70528_REG_RTC_ALM_START, &alm, + sizeof(alm)); if (ret) dev_err(dev, "Failed to set alarm time\n"); @@ -312,10 +318,9 @@ static int bd71828_read_alarm(struct device *dev, struct rtc_wkalrm *a) int ret; struct bd71828_rtc_alm alm; struct bd70528_rtc *r = dev_get_drvdata(dev); - struct rohm_regmap_dev *parent = r->parent; - ret = regmap_bulk_read(parent->regmap, BD71828_REG_RTC_ALM_START, - &alm, sizeof(alm)); + ret = regmap_bulk_read(r->regmap, r->bd718xx_alm_block_start, &alm, + sizeof(alm)); if (ret) { dev_err(dev, "Failed to read alarm regs\n"); return ret; @@ -336,10 +341,9 @@ static int bd70528_read_alarm(struct device *dev, struct rtc_wkalrm *a) struct bd70528_rtc_alm alm; int ret; struct bd70528_rtc *r = dev_get_drvdata(dev); - struct rohm_regmap_dev *parent = r->parent; - ret = regmap_bulk_read(parent->regmap, BD70528_REG_RTC_ALM_START, - &alm, sizeof(alm)); + ret = regmap_bulk_read(r->regmap, BD70528_REG_RTC_ALM_START, &alm, + sizeof(alm)); if (ret) { dev_err(dev, "Failed to read alarm regs\n"); return ret; @@ -360,14 +364,12 @@ static int bd70528_set_time_locked(struct device *dev, struct rtc_time *t) int ret, tmpret, old_states; struct bd70528_rtc_data rtc_data; struct bd70528_rtc *r = dev_get_drvdata(dev); - struct rohm_regmap_dev *parent = r->parent; ret = bd70528_disable_rtc_based_timers(r, &old_states); if (ret) return ret; - tmpret = regmap_bulk_read(parent->regmap, - r->reg_time_start, &rtc_data, + tmpret = regmap_bulk_read(r->regmap, r->reg_time_start, &rtc_data, sizeof(rtc_data)); if (tmpret) { dev_err(dev, "Failed to read RTC time registers\n"); @@ -375,8 +377,7 @@ static int bd70528_set_time_locked(struct device *dev, struct rtc_time *t) } tm2rtc(t, &rtc_data); - tmpret = regmap_bulk_write(parent->regmap, - r->reg_time_start, &rtc_data, + tmpret = regmap_bulk_write(r->regmap, r->reg_time_start, &rtc_data, sizeof(rtc_data)); if (tmpret) { dev_err(dev, "Failed to set RTC time\n"); @@ -410,13 +411,11 @@ static int bd70528_set_time(struct device *dev, struct rtc_time *t) static int bd70528_get_time(struct device *dev, struct rtc_time *t) { struct bd70528_rtc *r = dev_get_drvdata(dev); - struct rohm_regmap_dev *parent = r->parent; struct bd70528_rtc_data rtc_data; int ret; /* read the RTC date and time registers all at once */ - ret = regmap_bulk_read(parent->regmap, - r->reg_time_start, &rtc_data, + ret = regmap_bulk_read(r->regmap, r->reg_time_start, &rtc_data, sizeof(rtc_data)); if (ret) { dev_err(dev, "Failed to read RTC time (err %d)\n", ret); @@ -443,7 +442,7 @@ static int bd70528_alm_enable(struct device *dev, unsigned int enabled) dev_err(dev, "Failed to change wake state\n"); goto out_unlock; } - ret = regmap_update_bits(r->parent->regmap, BD70528_REG_RTC_ALM_MASK, + ret = regmap_update_bits(r->regmap, BD70528_REG_RTC_ALM_MASK, BD70528_MASK_ALM_EN, enableval); if (ret) dev_err(dev, "Failed to change alarm state\n"); @@ -462,8 +461,9 @@ static int bd71828_alm_enable(struct device *dev, unsigned int enabled) if (!enabled) enableval = 0; - ret = regmap_update_bits(r->parent->regmap, BD71828_REG_RTC_ALM0_MASK, - BD70528_MASK_ALM_EN, enableval); + ret = regmap_update_bits(r->regmap, r->bd718xx_alm_block_start + + BD718XX_ALM_EN_OFFSET, BD70528_MASK_ALM_EN, + enableval); if (ret) dev_err(dev, "Failed to change alarm state\n"); @@ -498,7 +498,6 @@ static int bd70528_probe(struct platform_device *pdev) { struct bd70528_rtc *bd_rtc; const struct rtc_class_ops *rtc_ops; - struct rohm_regmap_dev *parent; const char *irq_name; int ret; struct rtc_device *rtc; @@ -508,20 +507,25 @@ static int bd70528_probe(struct platform_device *pdev) u8 hour_reg; enum rohm_chip_type chip = platform_get_device_id(pdev)->driver_data; - parent = dev_get_drvdata(pdev->dev.parent); - if (!parent) { - dev_err(&pdev->dev, "No MFD driver data\n"); - return -EINVAL; - } bd_rtc = devm_kzalloc(&pdev->dev, sizeof(*bd_rtc), GFP_KERNEL); if (!bd_rtc) return -ENOMEM; - bd_rtc->parent = parent; + bd_rtc->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!bd_rtc->regmap) { + dev_err(&pdev->dev, "No regmap\n"); + return -EINVAL; + } + bd_rtc->dev = &pdev->dev; switch (chip) { case ROHM_CHIP_TYPE_BD70528: + bd_rtc->parent = dev_get_drvdata(pdev->dev.parent); + if (!bd_rtc->parent) { + dev_err(&pdev->dev, "No MFD data\n"); + return -EINVAL; + } irq_name = "bd70528-rtc-alm"; bd_rtc->has_rtc_timers = true; bd_rtc->reg_time_start = BD70528_REG_RTC_START; @@ -529,9 +533,28 @@ static int bd70528_probe(struct platform_device *pdev) enable_main_irq = true; rtc_ops = &bd70528_rtc_ops; break; + case ROHM_CHIP_TYPE_BD71815: + irq_name = "bd71815-rtc-alm-0"; + bd_rtc->reg_time_start = BD71815_REG_RTC_START; + + /* + * See also BD718XX_ALM_EN_OFFSET: + * This works for BD71828 and BD71815 as they have same offset + * between ALM0 start and ALM0_MASK. If new ICs are to be + * added this requires proper check as ALM0_MASK is not located + * at the end of ALM0 block - but after all ALM blocks so if + * amount of ALMs differ the offset to enable/disable is likely + * to be incorrect and enable/disable must be given as own + * reg address here. + */ + bd_rtc->bd718xx_alm_block_start = BD71815_REG_RTC_ALM_START; + hour_reg = BD71815_REG_HOUR; + rtc_ops = &bd71828_rtc_ops; + break; case ROHM_CHIP_TYPE_BD71828: irq_name = "bd71828-rtc-alm-0"; bd_rtc->reg_time_start = BD71828_REG_RTC_START; + bd_rtc->bd718xx_alm_block_start = BD71828_REG_RTC_ALM_START; hour_reg = BD71828_REG_RTC_HOUR; rtc_ops = &bd71828_rtc_ops; break; @@ -547,7 +570,7 @@ static int bd70528_probe(struct platform_device *pdev) platform_set_drvdata(pdev, bd_rtc); - ret = regmap_read(parent->regmap, hour_reg, &hr); + ret = regmap_read(bd_rtc->regmap, hour_reg, &hr); if (ret) { dev_err(&pdev->dev, "Failed to reag RTC clock\n"); @@ -595,7 +618,7 @@ static int bd70528_probe(struct platform_device *pdev) * from sub-registers when IRQ is disabled or freed. */ if (enable_main_irq) { - ret = regmap_update_bits(parent->regmap, + ret = regmap_update_bits(bd_rtc->regmap, BD70528_REG_INT_MAIN_MASK, BD70528_INT_RTC_MASK, 0); if (ret) { @@ -610,6 +633,7 @@ static int bd70528_probe(struct platform_device *pdev) static const struct platform_device_id bd718x7_rtc_id[] = { { "bd70528-rtc", ROHM_CHIP_TYPE_BD70528 }, { "bd71828-rtc", ROHM_CHIP_TYPE_BD71828 }, + { "bd71815-rtc", ROHM_CHIP_TYPE_BD71815 }, { }, }; MODULE_DEVICE_TABLE(platform, bd718x7_rtc_id); diff --git a/drivers/rtc/rtc-ntxec.c b/drivers/rtc/rtc-ntxec.c new file mode 100644 index 000000000000..850ca49186fd --- /dev/null +++ b/drivers/rtc/rtc-ntxec.c @@ -0,0 +1,145 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * The Netronix embedded controller is a microcontroller found in some + * e-book readers designed by the original design manufacturer Netronix, Inc. + * It contains RTC, battery monitoring, system power management, and PWM + * functionality. + * + * This driver implements access to the RTC time and date. + * + * Copyright 2020 Jonathan Neuschäfer <j.neuschaefer@gmx.net> + */ + +#include <linux/mfd/ntxec.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/rtc.h> +#include <linux/types.h> + +struct ntxec_rtc { + struct device *dev; + struct ntxec *ec; +}; + +#define NTXEC_REG_WRITE_YEAR 0x10 +#define NTXEC_REG_WRITE_MONTH 0x11 +#define NTXEC_REG_WRITE_DAY 0x12 +#define NTXEC_REG_WRITE_HOUR 0x13 +#define NTXEC_REG_WRITE_MINUTE 0x14 +#define NTXEC_REG_WRITE_SECOND 0x15 + +#define NTXEC_REG_READ_YEAR_MONTH 0x20 +#define NTXEC_REG_READ_MDAY_HOUR 0x21 +#define NTXEC_REG_READ_MINUTE_SECOND 0x23 + +static int ntxec_read_time(struct device *dev, struct rtc_time *tm) +{ + struct ntxec_rtc *rtc = dev_get_drvdata(dev); + unsigned int value; + int res; + +retry: + res = regmap_read(rtc->ec->regmap, NTXEC_REG_READ_MINUTE_SECOND, &value); + if (res < 0) + return res; + + tm->tm_min = value >> 8; + tm->tm_sec = value & 0xff; + + res = regmap_read(rtc->ec->regmap, NTXEC_REG_READ_MDAY_HOUR, &value); + if (res < 0) + return res; + + tm->tm_mday = value >> 8; + tm->tm_hour = value & 0xff; + + res = regmap_read(rtc->ec->regmap, NTXEC_REG_READ_YEAR_MONTH, &value); + if (res < 0) + return res; + + tm->tm_year = (value >> 8) + 100; + tm->tm_mon = (value & 0xff) - 1; + + /* + * Read the minutes/seconds field again. If it changed since the first + * read, we can't assume that the values read so far are consistent, + * and should start from the beginning. + */ + res = regmap_read(rtc->ec->regmap, NTXEC_REG_READ_MINUTE_SECOND, &value); + if (res < 0) + return res; + + if (tm->tm_min != value >> 8 || tm->tm_sec != (value & 0xff)) + goto retry; + + return 0; +} + +static int ntxec_set_time(struct device *dev, struct rtc_time *tm) +{ + struct ntxec_rtc *rtc = dev_get_drvdata(dev); + + /* + * To avoid time overflows while we're writing the full date/time, + * set the seconds field to zero before doing anything else. For the + * next 59 seconds (plus however long it takes until the RTC's next + * update of the second field), the seconds field will not overflow + * into the other fields. + */ + struct reg_sequence regs[] = { + { NTXEC_REG_WRITE_SECOND, ntxec_reg8(0) }, + { NTXEC_REG_WRITE_YEAR, ntxec_reg8(tm->tm_year - 100) }, + { NTXEC_REG_WRITE_MONTH, ntxec_reg8(tm->tm_mon + 1) }, + { NTXEC_REG_WRITE_DAY, ntxec_reg8(tm->tm_mday) }, + { NTXEC_REG_WRITE_HOUR, ntxec_reg8(tm->tm_hour) }, + { NTXEC_REG_WRITE_MINUTE, ntxec_reg8(tm->tm_min) }, + { NTXEC_REG_WRITE_SECOND, ntxec_reg8(tm->tm_sec) }, + }; + + return regmap_multi_reg_write(rtc->ec->regmap, regs, ARRAY_SIZE(regs)); +} + +static const struct rtc_class_ops ntxec_rtc_ops = { + .read_time = ntxec_read_time, + .set_time = ntxec_set_time, +}; + +static int ntxec_rtc_probe(struct platform_device *pdev) +{ + struct rtc_device *dev; + struct ntxec_rtc *rtc; + + pdev->dev.of_node = pdev->dev.parent->of_node; + + rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL); + if (!rtc) + return -ENOMEM; + + rtc->dev = &pdev->dev; + rtc->ec = dev_get_drvdata(pdev->dev.parent); + platform_set_drvdata(pdev, rtc); + + dev = devm_rtc_allocate_device(&pdev->dev); + if (IS_ERR(dev)) + return PTR_ERR(dev); + + dev->ops = &ntxec_rtc_ops; + dev->range_min = RTC_TIMESTAMP_BEGIN_2000; + dev->range_max = 9025257599LL; /* 2255-12-31 23:59:59 */ + + return devm_rtc_register_device(dev); +} + +static struct platform_driver ntxec_rtc_driver = { + .driver = { + .name = "ntxec-rtc", + }, + .probe = ntxec_rtc_probe, +}; +module_platform_driver(ntxec_rtc_driver); + +MODULE_AUTHOR("Jonathan Neuschäfer <j.neuschaefer@gmx.net>"); +MODULE_DESCRIPTION("RTC driver for Netronix EC"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:ntxec-rtc"); diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 1fe0042a48d2..355100dad60a 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -172,6 +172,19 @@ config BD70528_WATCHDOG Alternatively say M to compile the driver as a module, which will be called bd70528_wdt. +config BD957XMUF_WATCHDOG + tristate "ROHM BD9576MUF and BD9573MUF PMIC Watchdog" + depends on MFD_ROHM_BD957XMUF + select WATCHDOG_CORE + help + Support for the watchdog in the ROHM BD9576 and BD9573 PMICs. + These PMIC ICs contain watchdog block which can be configured + to toggle reset line if SoC fails to ping watchdog via GPIO. + + Say Y here to include support for the ROHM BD9576 or BD9573 + watchdog. Alternatively say M to compile the driver as a module, + which will be called bd9576_wdt. + config DA9052_WATCHDOG tristate "Dialog DA9052 Watchdog" depends on PMIC_DA9052 || COMPILE_TEST diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index f3a6540e725e..a7eade8b4d45 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -204,6 +204,7 @@ obj-$(CONFIG_XEN_WDT) += xen_wdt.o # Architecture Independent obj-$(CONFIG_BD70528_WATCHDOG) += bd70528_wdt.o +obj-$(CONFIG_BD957XMUF_WATCHDOG) += bd9576_wdt.o obj-$(CONFIG_DA9052_WATCHDOG) += da9052_wdt.o obj-$(CONFIG_DA9055_WATCHDOG) += da9055_wdt.o obj-$(CONFIG_DA9062_WATCHDOG) += da9062_wdt.o diff --git a/drivers/watchdog/bd9576_wdt.c b/drivers/watchdog/bd9576_wdt.c new file mode 100644 index 000000000000..0b6999f3b6e8 --- /dev/null +++ b/drivers/watchdog/bd9576_wdt.c @@ -0,0 +1,291 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2020 ROHM Semiconductors + * + * ROHM BD9576MUF and BD9573MUF Watchdog driver + */ + +#include <linux/err.h> +#include <linux/gpio/consumer.h> +#include <linux/mfd/rohm-bd957x.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/watchdog.h> + +static bool nowayout; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=\"false\")"); + +#define HW_MARGIN_MIN 2 +#define HW_MARGIN_MAX 4416 +#define BD957X_WDT_DEFAULT_MARGIN 4416 +#define WATCHDOG_TIMEOUT 30 + +struct bd9576_wdt_priv { + struct gpio_desc *gpiod_ping; + struct gpio_desc *gpiod_en; + struct device *dev; + struct regmap *regmap; + bool always_running; + struct watchdog_device wdd; +}; + +static void bd9576_wdt_disable(struct bd9576_wdt_priv *priv) +{ + gpiod_set_value_cansleep(priv->gpiod_en, 0); +} + +static int bd9576_wdt_ping(struct watchdog_device *wdd) +{ + struct bd9576_wdt_priv *priv = watchdog_get_drvdata(wdd); + + /* Pulse */ + gpiod_set_value_cansleep(priv->gpiod_ping, 1); + gpiod_set_value_cansleep(priv->gpiod_ping, 0); + + return 0; +} + +static int bd9576_wdt_start(struct watchdog_device *wdd) +{ + struct bd9576_wdt_priv *priv = watchdog_get_drvdata(wdd); + + gpiod_set_value_cansleep(priv->gpiod_en, 1); + + return bd9576_wdt_ping(wdd); +} + +static int bd9576_wdt_stop(struct watchdog_device *wdd) +{ + struct bd9576_wdt_priv *priv = watchdog_get_drvdata(wdd); + + if (!priv->always_running) + bd9576_wdt_disable(priv); + else + set_bit(WDOG_HW_RUNNING, &wdd->status); + + return 0; +} + +static const struct watchdog_info bd957x_wdt_ident = { + .options = WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING | + WDIOF_SETTIMEOUT, + .identity = "BD957x Watchdog", +}; + +static const struct watchdog_ops bd957x_wdt_ops = { + .owner = THIS_MODULE, + .start = bd9576_wdt_start, + .stop = bd9576_wdt_stop, + .ping = bd9576_wdt_ping, +}; + +/* Unit is hundreds of uS */ +#define FASTNG_MIN 23 + +static int find_closest_fast(int target, int *sel, int *val) +{ + int i; + int window = FASTNG_MIN; + + for (i = 0; i < 8 && window < target; i++) + window <<= 1; + + *val = window; + *sel = i; + + if (i == 8) + return -EINVAL; + + return 0; + +} + +static int find_closest_slow_by_fast(int fast_val, int target, int *slowsel) +{ + int sel; + static const int multipliers[] = {2, 3, 7, 15}; + + for (sel = 0; sel < ARRAY_SIZE(multipliers) && + multipliers[sel] * fast_val < target; sel++) + ; + + if (sel == ARRAY_SIZE(multipliers)) + return -EINVAL; + + *slowsel = sel; + + return 0; +} + +static int find_closest_slow(int target, int *slow_sel, int *fast_sel) +{ + static const int multipliers[] = {2, 3, 7, 15}; + int i, j; + int val = 0; + int window = FASTNG_MIN; + + for (i = 0; i < 8; i++) { + for (j = 0; j < ARRAY_SIZE(multipliers); j++) { + int slow; + + slow = window * multipliers[j]; + if (slow >= target && (!val || slow < val)) { + val = slow; + *fast_sel = i; + *slow_sel = j; + } + } + window <<= 1; + } + if (!val) + return -EINVAL; + + return 0; +} + +#define BD957X_WDG_TYPE_WINDOW BIT(5) +#define BD957X_WDG_TYPE_SLOW 0 +#define BD957X_WDG_TYPE_MASK BIT(5) +#define BD957X_WDG_NG_RATIO_MASK 0x18 +#define BD957X_WDG_FASTNG_MASK 0x7 + +static int bd957x_set_wdt_mode(struct bd9576_wdt_priv *priv, int hw_margin, + int hw_margin_min) +{ + int ret, fastng, slowng, type, reg, mask; + struct device *dev = priv->dev; + + /* convert to 100uS */ + hw_margin *= 10; + hw_margin_min *= 10; + if (hw_margin_min) { + int min; + + type = BD957X_WDG_TYPE_WINDOW; + dev_dbg(dev, "Setting type WINDOW 0x%x\n", type); + ret = find_closest_fast(hw_margin_min, &fastng, &min); + if (ret) { + dev_err(dev, "bad WDT window for fast timeout\n"); + return ret; + } + + ret = find_closest_slow_by_fast(min, hw_margin, &slowng); + if (ret) { + dev_err(dev, "bad WDT window\n"); + return ret; + } + + } else { + type = BD957X_WDG_TYPE_SLOW; + dev_dbg(dev, "Setting type SLOW 0x%x\n", type); + ret = find_closest_slow(hw_margin, &slowng, &fastng); + if (ret) { + dev_err(dev, "bad WDT window\n"); + return ret; + } + } + + slowng <<= ffs(BD957X_WDG_NG_RATIO_MASK) - 1; + reg = type | slowng | fastng; + mask = BD957X_WDG_TYPE_MASK | BD957X_WDG_NG_RATIO_MASK | + BD957X_WDG_FASTNG_MASK; + ret = regmap_update_bits(priv->regmap, BD957X_REG_WDT_CONF, + mask, reg); + + return ret; +} + +static int bd9576_wdt_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->parent->of_node; + struct bd9576_wdt_priv *priv; + u32 hw_margin[2]; + u32 hw_margin_max = BD957X_WDT_DEFAULT_MARGIN, hw_margin_min = 0; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + platform_set_drvdata(pdev, priv); + + priv->dev = dev; + priv->regmap = dev_get_regmap(dev->parent, NULL); + if (!priv->regmap) { + dev_err(dev, "No regmap found\n"); + return -ENODEV; + } + + priv->gpiod_en = devm_gpiod_get_from_of_node(dev, dev->parent->of_node, + "rohm,watchdog-enable-gpios", + 0, GPIOD_OUT_LOW, + "watchdog-enable"); + if (IS_ERR(priv->gpiod_en)) + return dev_err_probe(dev, PTR_ERR(priv->gpiod_en), + "getting watchdog-enable GPIO failed\n"); + + priv->gpiod_ping = devm_gpiod_get_from_of_node(dev, dev->parent->of_node, + "rohm,watchdog-ping-gpios", + 0, GPIOD_OUT_LOW, + "watchdog-ping"); + if (IS_ERR(priv->gpiod_ping)) + return dev_err_probe(dev, PTR_ERR(priv->gpiod_ping), + "getting watchdog-ping GPIO failed\n"); + + ret = of_property_read_variable_u32_array(np, "rohm,hw-timeout-ms", + &hw_margin[0], 1, 2); + if (ret < 0 && ret != -EINVAL) + return ret; + + if (ret == 1) + hw_margin_max = hw_margin[0]; + + if (ret == 2) { + hw_margin_max = hw_margin[1]; + hw_margin_min = hw_margin[0]; + } + + ret = bd957x_set_wdt_mode(priv, hw_margin_max, hw_margin_min); + if (ret) + return ret; + + priv->always_running = of_property_read_bool(np, "always-running"); + + watchdog_set_drvdata(&priv->wdd, priv); + + priv->wdd.info = &bd957x_wdt_ident; + priv->wdd.ops = &bd957x_wdt_ops; + priv->wdd.min_hw_heartbeat_ms = hw_margin_min; + priv->wdd.max_hw_heartbeat_ms = hw_margin_max; + priv->wdd.parent = dev; + priv->wdd.timeout = WATCHDOG_TIMEOUT; + + watchdog_init_timeout(&priv->wdd, 0, dev); + watchdog_set_nowayout(&priv->wdd, nowayout); + + watchdog_stop_on_reboot(&priv->wdd); + + if (priv->always_running) + bd9576_wdt_start(&priv->wdd); + + return devm_watchdog_register_device(dev, &priv->wdd); +} + +static struct platform_driver bd9576_wdt_driver = { + .driver = { + .name = "bd9576-wdt", + }, + .probe = bd9576_wdt_probe, +}; + +module_platform_driver(bd9576_wdt_driver); + +MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>"); +MODULE_DESCRIPTION("ROHM BD9576/BD9573 Watchdog driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:bd9576-wdt"); diff --git a/include/linux/mfd/ab3100.h b/include/linux/mfd/ab3100.h deleted file mode 100644 index a881d8495186..000000000000 --- a/include/linux/mfd/ab3100.h +++ /dev/null @@ -1,128 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2007-2009 ST-Ericsson AB - * AB3100 core access functions - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ - -#include <linux/regulator/machine.h> - -struct device; - -#ifndef MFD_AB3100_H -#define MFD_AB3100_H - - -#define AB3100_P1A 0xc0 -#define AB3100_P1B 0xc1 -#define AB3100_P1C 0xc2 -#define AB3100_P1D 0xc3 -#define AB3100_P1E 0xc4 -#define AB3100_P1F 0xc5 -#define AB3100_P1G 0xc6 -#define AB3100_R2A 0xc7 -#define AB3100_R2B 0xc8 - -/* - * AB3100, EVENTA1, A2 and A3 event register flags - * these are catenated into a single 32-bit flag in the code - * for event notification broadcasts. - */ -#define AB3100_EVENTA1_ONSWA (0x01<<16) -#define AB3100_EVENTA1_ONSWB (0x02<<16) -#define AB3100_EVENTA1_ONSWC (0x04<<16) -#define AB3100_EVENTA1_DCIO (0x08<<16) -#define AB3100_EVENTA1_OVER_TEMP (0x10<<16) -#define AB3100_EVENTA1_SIM_OFF (0x20<<16) -#define AB3100_EVENTA1_VBUS (0x40<<16) -#define AB3100_EVENTA1_VSET_USB (0x80<<16) - -#define AB3100_EVENTA2_READY_TX (0x01<<8) -#define AB3100_EVENTA2_READY_RX (0x02<<8) -#define AB3100_EVENTA2_OVERRUN_ERROR (0x04<<8) -#define AB3100_EVENTA2_FRAMING_ERROR (0x08<<8) -#define AB3100_EVENTA2_CHARG_OVERCURRENT (0x10<<8) -#define AB3100_EVENTA2_MIDR (0x20<<8) -#define AB3100_EVENTA2_BATTERY_REM (0x40<<8) -#define AB3100_EVENTA2_ALARM (0x80<<8) - -#define AB3100_EVENTA3_ADC_TRIG5 (0x01) -#define AB3100_EVENTA3_ADC_TRIG4 (0x02) -#define AB3100_EVENTA3_ADC_TRIG3 (0x04) -#define AB3100_EVENTA3_ADC_TRIG2 (0x08) -#define AB3100_EVENTA3_ADC_TRIGVBAT (0x10) -#define AB3100_EVENTA3_ADC_TRIGVTX (0x20) -#define AB3100_EVENTA3_ADC_TRIG1 (0x40) -#define AB3100_EVENTA3_ADC_TRIG0 (0x80) - -/* AB3100, STR register flags */ -#define AB3100_STR_ONSWA (0x01) -#define AB3100_STR_ONSWB (0x02) -#define AB3100_STR_ONSWC (0x04) -#define AB3100_STR_DCIO (0x08) -#define AB3100_STR_BOOT_MODE (0x10) -#define AB3100_STR_SIM_OFF (0x20) -#define AB3100_STR_BATT_REMOVAL (0x40) -#define AB3100_STR_VBUS (0x80) - -/* - * AB3100 contains 8 regulators, one external regulator controller - * and a buck converter, further the LDO E and buck converter can - * have separate settings if they are in sleep mode, this is - * modeled as a separate regulator. - */ -#define AB3100_NUM_REGULATORS 10 - -/** - * struct ab3100 - * @access_mutex: lock out concurrent accesses to the AB3100 registers - * @dev: pointer to the containing device - * @i2c_client: I2C client for this chip - * @testreg_client: secondary client for test registers - * @chip_name: name of this chip variant - * @chip_id: 8 bit chip ID for this chip variant - * @event_subscribers: event subscribers are listed here - * @startup_events: a copy of the first reading of the event registers - * @startup_events_read: whether the first events have been read - * - * This struct is PRIVATE and devices using it should NOT - * access ANY fields. It is used as a token for calling the - * AB3100 functions. - */ -struct ab3100 { - struct mutex access_mutex; - struct device *dev; - struct i2c_client *i2c_client; - struct i2c_client *testreg_client; - char chip_name[32]; - u8 chip_id; - struct blocking_notifier_head event_subscribers; - u8 startup_events[3]; - bool startup_events_read; -}; - -/** - * struct ab3100_platform_data - * Data supplied to initialize board connections to the AB3100 - * @reg_constraints: regulator constraints for target board - * the order of these constraints are: LDO A, C, D, E, - * F, G, H, K, EXT and BUCK. - * @reg_initvals: initial values for the regulator registers - * plus two sleep settings for LDO E and the BUCK converter. - * exactly AB3100_NUM_REGULATORS+2 values must be sent in. - * Order: LDO A, C, E, E sleep, F, G, H, K, EXT, BUCK, - * BUCK sleep, LDO D. (LDO D need to be initialized last.) - * @external_voltage: voltage level of the external regulator. - */ -struct ab3100_platform_data { - struct regulator_init_data reg_constraints[AB3100_NUM_REGULATORS]; - u8 reg_initvals[AB3100_NUM_REGULATORS+2]; - int external_voltage; -}; - -int ab3100_event_register(struct ab3100 *ab3100, - struct notifier_block *nb); -int ab3100_event_unregister(struct ab3100 *ab3100, - struct notifier_block *nb); - -#endif /* MFD_AB3100_H */ diff --git a/include/linux/mfd/atc260x/atc2603c.h b/include/linux/mfd/atc260x/atc2603c.h new file mode 100644 index 000000000000..07ac640ef3e1 --- /dev/null +++ b/include/linux/mfd/atc260x/atc2603c.h @@ -0,0 +1,281 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * ATC2603C PMIC register definitions + * + * Copyright (C) 2020 Cristian Ciocaltea <cristian.ciocaltea@gmail.com> + */ + +#ifndef __LINUX_MFD_ATC260X_ATC2603C_H +#define __LINUX_MFD_ATC260X_ATC2603C_H + +enum atc2603c_irq_def { + ATC2603C_IRQ_AUDIO = 0, + ATC2603C_IRQ_OV, + ATC2603C_IRQ_OC, + ATC2603C_IRQ_OT, + ATC2603C_IRQ_UV, + ATC2603C_IRQ_ALARM, + ATC2603C_IRQ_ONOFF, + ATC2603C_IRQ_SGPIO, + ATC2603C_IRQ_IR, + ATC2603C_IRQ_REMCON, + ATC2603C_IRQ_POWER_IN, +}; + +/* PMU Registers */ +#define ATC2603C_PMU_SYS_CTL0 0x00 +#define ATC2603C_PMU_SYS_CTL1 0x01 +#define ATC2603C_PMU_SYS_CTL2 0x02 +#define ATC2603C_PMU_SYS_CTL3 0x03 +#define ATC2603C_PMU_SYS_CTL4 0x04 +#define ATC2603C_PMU_SYS_CTL5 0x05 +#define ATC2603C_PMU_SYS_CTL6 0x06 +#define ATC2603C_PMU_SYS_CTL7 0x07 +#define ATC2603C_PMU_SYS_CTL8 0x08 +#define ATC2603C_PMU_SYS_CTL9 0x09 +#define ATC2603C_PMU_BAT_CTL0 0x0A +#define ATC2603C_PMU_BAT_CTL1 0x0B +#define ATC2603C_PMU_VBUS_CTL0 0x0C +#define ATC2603C_PMU_VBUS_CTL1 0x0D +#define ATC2603C_PMU_WALL_CTL0 0x0E +#define ATC2603C_PMU_WALL_CTL1 0x0F +#define ATC2603C_PMU_SYS_PENDING 0x10 +#define ATC2603C_PMU_DC1_CTL0 0x11 +#define ATC2603C_PMU_DC1_CTL1 0x12 // Undocumented +#define ATC2603C_PMU_DC1_CTL2 0x13 // Undocumented +#define ATC2603C_PMU_DC2_CTL0 0x14 +#define ATC2603C_PMU_DC2_CTL1 0x15 // Undocumented +#define ATC2603C_PMU_DC2_CTL2 0x16 // Undocumented +#define ATC2603C_PMU_DC3_CTL0 0x17 +#define ATC2603C_PMU_DC3_CTL1 0x18 // Undocumented +#define ATC2603C_PMU_DC3_CTL2 0x19 // Undocumented +#define ATC2603C_PMU_DC4_CTL0 0x1A // Undocumented +#define ATC2603C_PMU_DC4_CTL1 0x1B // Undocumented +#define ATC2603C_PMU_DC5_CTL0 0x1C // Undocumented +#define ATC2603C_PMU_DC5_CTL1 0x1D // Undocumented +#define ATC2603C_PMU_LDO1_CTL 0x1E +#define ATC2603C_PMU_LDO2_CTL 0x1F +#define ATC2603C_PMU_LDO3_CTL 0x20 +#define ATC2603C_PMU_LDO4_CTL 0x21 // Undocumented +#define ATC2603C_PMU_LDO5_CTL 0x22 +#define ATC2603C_PMU_LDO6_CTL 0x23 +#define ATC2603C_PMU_LDO7_CTL 0x24 +#define ATC2603C_PMU_LDO8_CTL 0x25 // Undocumented +#define ATC2603C_PMU_LDO9_CTL 0x26 // Undocumented +#define ATC2603C_PMU_LDO10_CTL 0x27 // Undocumented +#define ATC2603C_PMU_LDO11_CTL 0x28 +#define ATC2603C_PMU_SWITCH_CTL 0x29 +#define ATC2603C_PMU_OV_CTL0 0x2A +#define ATC2603C_PMU_OV_CTL1 0x2B +#define ATC2603C_PMU_OV_STATUS 0x2C +#define ATC2603C_PMU_OV_EN 0x2D +#define ATC2603C_PMU_OV_INT_EN 0x2E +#define ATC2603C_PMU_OC_CTL 0x2F +#define ATC2603C_PMU_OC_STATUS 0x30 +#define ATC2603C_PMU_OC_EN 0x31 +#define ATC2603C_PMU_OC_INT_EN 0x32 +#define ATC2603C_PMU_UV_CTL0 0x33 +#define ATC2603C_PMU_UV_CTL1 0x34 +#define ATC2603C_PMU_UV_STATUS 0x35 +#define ATC2603C_PMU_UV_EN 0x36 +#define ATC2603C_PMU_UV_INT_EN 0x37 +#define ATC2603C_PMU_OT_CTL 0x38 +#define ATC2603C_PMU_CHARGER_CTL0 0x39 +#define ATC2603C_PMU_CHARGER_CTL1 0x3A +#define ATC2603C_PMU_CHARGER_CTL2 0x3B +#define ATC2603C_PMU_BAKCHARGER_CTL 0x3C // Undocumented +#define ATC2603C_PMU_APDS_CTL 0x3D +#define ATC2603C_PMU_AUXADC_CTL0 0x3E +#define ATC2603C_PMU_AUXADC_CTL1 0x3F +#define ATC2603C_PMU_BATVADC 0x40 +#define ATC2603C_PMU_BATIADC 0x41 +#define ATC2603C_PMU_WALLVADC 0x42 +#define ATC2603C_PMU_WALLIADC 0x43 +#define ATC2603C_PMU_VBUSVADC 0x44 +#define ATC2603C_PMU_VBUSIADC 0x45 +#define ATC2603C_PMU_SYSPWRADC 0x46 +#define ATC2603C_PMU_REMCONADC 0x47 +#define ATC2603C_PMU_SVCCADC 0x48 +#define ATC2603C_PMU_CHGIADC 0x49 +#define ATC2603C_PMU_IREFADC 0x4A +#define ATC2603C_PMU_BAKBATADC 0x4B +#define ATC2603C_PMU_ICTEMPADC 0x4C +#define ATC2603C_PMU_AUXADC0 0x4D +#define ATC2603C_PMU_AUXADC1 0x4E +#define ATC2603C_PMU_AUXADC2 0x4F +#define ATC2603C_PMU_ICMADC 0x50 +#define ATC2603C_PMU_BDG_CTL 0x51 // Undocumented +#define ATC2603C_RTC_CTL 0x52 +#define ATC2603C_RTC_MSALM 0x53 +#define ATC2603C_RTC_HALM 0x54 +#define ATC2603C_RTC_YMDALM 0x55 +#define ATC2603C_RTC_MS 0x56 +#define ATC2603C_RTC_H 0x57 +#define ATC2603C_RTC_DC 0x58 +#define ATC2603C_RTC_YMD 0x59 +#define ATC2603C_EFUSE_DAT 0x5A // Undocumented +#define ATC2603C_EFUSECRTL1 0x5B // Undocumented +#define ATC2603C_EFUSECRTL2 0x5C // Undocumented +#define ATC2603C_PMU_FW_USE0 0x5D // Undocumented +#define ATC2603C_PMU_FW_USE1 0x5E // Undocumented +#define ATC2603C_PMU_FW_USE2 0x5F // Undocumented +#define ATC2603C_PMU_FW_USE3 0x60 // Undocumented +#define ATC2603C_PMU_FW_USE4 0x61 // Undocumented +#define ATC2603C_PMU_ABNORMAL_STATUS 0x62 +#define ATC2603C_PMU_WALL_APDS_CTL 0x63 +#define ATC2603C_PMU_REMCON_CTL0 0x64 +#define ATC2603C_PMU_REMCON_CTL1 0x65 +#define ATC2603C_PMU_MUX_CTL0 0x66 +#define ATC2603C_PMU_SGPIO_CTL0 0x67 +#define ATC2603C_PMU_SGPIO_CTL1 0x68 +#define ATC2603C_PMU_SGPIO_CTL2 0x69 +#define ATC2603C_PMU_SGPIO_CTL3 0x6A +#define ATC2603C_PMU_SGPIO_CTL4 0x6B +#define ATC2603C_PWMCLK_CTL 0x6C +#define ATC2603C_PWM0_CTL 0x6D +#define ATC2603C_PWM1_CTL 0x6E +#define ATC2603C_PMU_ADC_DBG0 0x70 +#define ATC2603C_PMU_ADC_DBG1 0x71 +#define ATC2603C_PMU_ADC_DBG2 0x72 +#define ATC2603C_PMU_ADC_DBG3 0x73 +#define ATC2603C_PMU_ADC_DBG4 0x74 +#define ATC2603C_IRC_CTL 0x80 +#define ATC2603C_IRC_STAT 0x81 +#define ATC2603C_IRC_CC 0x82 +#define ATC2603C_IRC_KDC 0x83 +#define ATC2603C_IRC_WK 0x84 +#define ATC2603C_IRC_RCC 0x85 +#define ATC2603C_IRC_FILTER 0x86 + +/* AUDIO_OUT Registers */ +#define ATC2603C_AUDIOINOUT_CTL 0xA0 +#define ATC2603C_AUDIO_DEBUGOUTCTL 0xA1 +#define ATC2603C_DAC_DIGITALCTL 0xA2 +#define ATC2603C_DAC_VOLUMECTL0 0xA3 +#define ATC2603C_DAC_ANALOG0 0xA4 +#define ATC2603C_DAC_ANALOG1 0xA5 +#define ATC2603C_DAC_ANALOG2 0xA6 +#define ATC2603C_DAC_ANALOG3 0xA7 + +/* AUDIO_IN Registers */ +#define ATC2603C_ADC_DIGITALCTL 0xA8 +#define ATC2603C_ADC_HPFCTL 0xA9 +#define ATC2603C_ADC_CTL 0xAA +#define ATC2603C_AGC_CTL0 0xAB +#define ATC2603C_AGC_CTL1 0xAC // Undocumented +#define ATC2603C_AGC_CTL2 0xAD +#define ATC2603C_ADC_ANALOG0 0xAE +#define ATC2603C_ADC_ANALOG1 0xAF + +/* PCM_IF Registers */ +#define ATC2603C_PCM0_CTL 0xB0 // Undocumented +#define ATC2603C_PCM1_CTL 0xB1 // Undocumented +#define ATC2603C_PCM2_CTL 0xB2 // Undocumented +#define ATC2603C_PCMIF_CTL 0xB3 // Undocumented + +/* CMU_CONTROL Registers */ +#define ATC2603C_CMU_DEVRST 0xC1 // Undocumented + +/* INTS Registers */ +#define ATC2603C_INTS_PD 0xC8 +#define ATC2603C_INTS_MSK 0xC9 + +/* MFP Registers */ +#define ATC2603C_MFP_CTL 0xD0 +#define ATC2603C_PAD_VSEL 0xD1 // Undocumented +#define ATC2603C_GPIO_OUTEN 0xD2 +#define ATC2603C_GPIO_INEN 0xD3 +#define ATC2603C_GPIO_DAT 0xD4 +#define ATC2603C_PAD_DRV 0xD5 +#define ATC2603C_PAD_EN 0xD6 +#define ATC2603C_DEBUG_SEL 0xD7 // Undocumented +#define ATC2603C_DEBUG_IE 0xD8 // Undocumented +#define ATC2603C_DEBUG_OE 0xD9 // Undocumented +#define ATC2603C_BIST_START 0x0A // Undocumented +#define ATC2603C_BIST_RESULT 0x0B // Undocumented +#define ATC2603C_CHIP_VER 0xDC + +/* TWSI Registers */ +#define ATC2603C_SADDR 0xFF + +/* PMU_SYS_CTL0 Register Mask Bits */ +#define ATC2603C_PMU_SYS_CTL0_IR_WK_EN BIT(5) +#define ATC2603C_PMU_SYS_CTL0_RESET_WK_EN BIT(6) +#define ATC2603C_PMU_SYS_CTL0_HDSW_WK_EN BIT(7) +#define ATC2603C_PMU_SYS_CTL0_ALARM_WK_EN BIT(8) +#define ATC2603C_PMU_SYS_CTL0_REM_CON_WK_EN BIT(9) +#define ATC2603C_PMU_SYS_CTL0_RESTART_EN BIT(10) +#define ATC2603C_PMU_SYS_CTL0_SGPIOIRQ_WK_EN BIT(11) +#define ATC2603C_PMU_SYS_CTL0_ONOFF_SHORT_WK_EN BIT(12) +#define ATC2603C_PMU_SYS_CTL0_ONOFF_LONG_WK_EN BIT(13) +#define ATC2603C_PMU_SYS_CTL0_WALL_WK_EN BIT(14) +#define ATC2603C_PMU_SYS_CTL0_USB_WK_EN BIT(15) +#define ATC2603C_PMU_SYS_CTL0_WK_ALL (GENMASK(15, 5) & (~BIT(10))) + +/* PMU_SYS_CTL1 Register Mask Bits */ +#define ATC2603C_PMU_SYS_CTL1_EN_S1 BIT(0) +#define ATC2603C_PMU_SYS_CTL1_LB_S4_EN BIT(2) +#define ATC2603C_PMU_SYS_CTL1_LB_S4 GENMASK(4, 3) +#define ATC2603C_PMU_SYS_CTL1_LB_S4_3_1V BIT(4) +#define ATC2603C_PMU_SYS_CTL1_IR_WK_FLAG BIT(5) +#define ATC2603C_PMU_SYS_CTL1_RESET_WK_FLAG BIT(6) +#define ATC2603C_PMU_SYS_CTL1_HDSW_WK_FLAG BIT(7) +#define ATC2603C_PMU_SYS_CTL1_ALARM_WK_FLAG BIT(8) +#define ATC2603C_PMU_SYS_CTL1_REM_CON_WK_FLAG BIT(9) +#define ATC2603C_PMU_SYS_CTL1_ONOFF_PRESS_RESET_IRQ_PD BIT(10) +#define ATC2603C_PMU_SYS_CTL1_SGPIOIRQ_WK_FLAG BIT(11) +#define ATC2603C_PMU_SYS_CTL1_ONOFF_SHORT_WK_FLAG BIT(12) +#define ATC2603C_PMU_SYS_CTL1_ONOFF_LONG_WK_FLAG BIT(13) +#define ATC2603C_PMU_SYS_CTL1_WALL_WK_FLAG BIT(14) +#define ATC2603C_PMU_SYS_CTL1_USB_WK_FLAG BIT(15) + +/* PMU_SYS_CTL2 Register Mask Bits */ +#define ATC2603C_PMU_SYS_CTL2_PMU_A_EN BIT(0) +#define ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS_INT_EN BIT(1) +#define ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS_PD BIT(2) +#define ATC2603C_PMU_SYS_CTL2_S2TIMER GENMASK(5, 3) +#define ATC2603C_PMU_SYS_CTL2_S2_TIMER_EN BIT(6) +#define ATC2603C_PMU_SYS_CTL2_ONOFF_RESET_TIME_SEL GENMASK(8, 7) +#define ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS_RESET_EN BIT(9) +#define ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS_TIME GENMASK(11, 10) +#define ATC2603C_PMU_SYS_CTL2_ONOFF_INT_EN BIT(12) +#define ATC2603C_PMU_SYS_CTL2_ONOFF_LONG_PRESS BIT(13) +#define ATC2603C_PMU_SYS_CTL2_ONOFF_SHORT_PRESS BIT(14) +#define ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS BIT(15) + +/* PMU_SYS_CTL3 Register Mask Bits */ +#define ATC2603C_PMU_SYS_CTL3_S2S3TOS1_TIMER GENMASK(8, 7) +#define ATC2603C_PMU_SYS_CTL3_S2S3TOS1_TIMER_EN BIT(9) +#define ATC2603C_PMU_SYS_CTL3_S3_TIMER GENMASK(12, 10) +#define ATC2603C_PMU_SYS_CTL3_S3_TIMER_EN BIT(13) +#define ATC2603C_PMU_SYS_CTL3_EN_S3 BIT(14) +#define ATC2603C_PMU_SYS_CTL3_EN_S2 BIT(15) + +/* PMU_SYS_CTL5 Register Mask Bits */ +#define ATC2603C_PMU_SYS_CTL5_WALLWKDTEN BIT(7) +#define ATC2603C_PMU_SYS_CTL5_VBUSWKDTEN BIT(8) +#define ATC2603C_PMU_SYS_CTL5_REMCON_DECT_EN BIT(9) +#define ATC2603C_PMU_SYS_CTL5_ONOFF_8S_SEL BIT(10) + +/* INTS_MSK Register Mask Bits */ +#define ATC2603C_INTS_MSK_AUDIO BIT(0) +#define ATC2603C_INTS_MSK_OV BIT(1) +#define ATC2603C_INTS_MSK_OC BIT(2) +#define ATC2603C_INTS_MSK_OT BIT(3) +#define ATC2603C_INTS_MSK_UV BIT(4) +#define ATC2603C_INTS_MSK_ALARM BIT(5) +#define ATC2603C_INTS_MSK_ONOFF BIT(6) +#define ATC2603C_INTS_MSK_SGPIO BIT(7) +#define ATC2603C_INTS_MSK_IR BIT(8) +#define ATC2603C_INTS_MSK_REMCON BIT(9) +#define ATC2603C_INTS_MSK_POWERIN BIT(10) + +/* CMU_DEVRST Register Mask Bits */ +#define ATC2603C_CMU_DEVRST_MFP BIT(1) +#define ATC2603C_CMU_DEVRST_INTS BIT(2) +#define ATC2603C_CMU_DEVRST_AUDIO BIT(4) + +/* PAD_EN Register Mask Bits */ +#define ATC2603C_PAD_EN_EXTIRQ BIT(0) + +#endif /* __LINUX_MFD_ATC260X_ATC2603C_H */ diff --git a/include/linux/mfd/atc260x/atc2609a.h b/include/linux/mfd/atc260x/atc2609a.h new file mode 100644 index 000000000000..b957d7bd73e9 --- /dev/null +++ b/include/linux/mfd/atc260x/atc2609a.h @@ -0,0 +1,308 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * ATC2609A PMIC register definitions + * + * Copyright (C) 2019 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + */ + +#ifndef __LINUX_MFD_ATC260X_ATC2609A_H +#define __LINUX_MFD_ATC260X_ATC2609A_H + +enum atc2609a_irq_def { + ATC2609A_IRQ_AUDIO = 0, + ATC2609A_IRQ_OV, + ATC2609A_IRQ_OC, + ATC2609A_IRQ_OT, + ATC2609A_IRQ_UV, + ATC2609A_IRQ_ALARM, + ATC2609A_IRQ_ONOFF, + ATC2609A_IRQ_WKUP, + ATC2609A_IRQ_IR, + ATC2609A_IRQ_REMCON, + ATC2609A_IRQ_POWER_IN, +}; + +/* PMU Registers */ +#define ATC2609A_PMU_SYS_CTL0 0x00 +#define ATC2609A_PMU_SYS_CTL1 0x01 +#define ATC2609A_PMU_SYS_CTL2 0x02 +#define ATC2609A_PMU_SYS_CTL3 0x03 +#define ATC2609A_PMU_SYS_CTL4 0x04 +#define ATC2609A_PMU_SYS_CTL5 0x05 +#define ATC2609A_PMU_SYS_CTL6 0x06 +#define ATC2609A_PMU_SYS_CTL7 0x07 +#define ATC2609A_PMU_SYS_CTL8 0x08 +#define ATC2609A_PMU_SYS_CTL9 0x09 +#define ATC2609A_PMU_BAT_CTL0 0x0A +#define ATC2609A_PMU_BAT_CTL1 0x0B +#define ATC2609A_PMU_VBUS_CTL0 0x0C +#define ATC2609A_PMU_VBUS_CTL1 0x0D +#define ATC2609A_PMU_WALL_CTL0 0x0E +#define ATC2609A_PMU_WALL_CTL1 0x0F +#define ATC2609A_PMU_SYS_PENDING 0x10 +#define ATC2609A_PMU_APDS_CTL0 0x11 +#define ATC2609A_PMU_APDS_CTL1 0x12 +#define ATC2609A_PMU_APDS_CTL2 0x13 +#define ATC2609A_PMU_CHARGER_CTL 0x14 +#define ATC2609A_PMU_BAKCHARGER_CTL 0x15 +#define ATC2609A_PMU_SWCHG_CTL0 0x16 +#define ATC2609A_PMU_SWCHG_CTL1 0x17 +#define ATC2609A_PMU_SWCHG_CTL2 0x18 +#define ATC2609A_PMU_SWCHG_CTL3 0x19 +#define ATC2609A_PMU_SWCHG_CTL4 0x1A +#define ATC2609A_PMU_DC_OSC 0x1B +#define ATC2609A_PMU_DC0_CTL0 0x1C +#define ATC2609A_PMU_DC0_CTL1 0x1D +#define ATC2609A_PMU_DC0_CTL2 0x1E +#define ATC2609A_PMU_DC0_CTL3 0x1F +#define ATC2609A_PMU_DC0_CTL4 0x20 +#define ATC2609A_PMU_DC0_CTL5 0x21 +#define ATC2609A_PMU_DC0_CTL6 0x22 +#define ATC2609A_PMU_DC1_CTL0 0x23 +#define ATC2609A_PMU_DC1_CTL1 0x24 +#define ATC2609A_PMU_DC1_CTL2 0x25 +#define ATC2609A_PMU_DC1_CTL3 0x26 +#define ATC2609A_PMU_DC1_CTL4 0x27 +#define ATC2609A_PMU_DC1_CTL5 0x28 +#define ATC2609A_PMU_DC1_CTL6 0x29 +#define ATC2609A_PMU_DC2_CTL0 0x2A +#define ATC2609A_PMU_DC2_CTL1 0x2B +#define ATC2609A_PMU_DC2_CTL2 0x2C +#define ATC2609A_PMU_DC2_CTL3 0x2D +#define ATC2609A_PMU_DC2_CTL4 0x2E +#define ATC2609A_PMU_DC2_CTL5 0x2F +#define ATC2609A_PMU_DC2_CTL6 0x30 +#define ATC2609A_PMU_DC3_CTL0 0x31 +#define ATC2609A_PMU_DC3_CTL1 0x32 +#define ATC2609A_PMU_DC3_CTL2 0x33 +#define ATC2609A_PMU_DC3_CTL3 0x34 +#define ATC2609A_PMU_DC3_CTL4 0x35 +#define ATC2609A_PMU_DC3_CTL5 0x36 +#define ATC2609A_PMU_DC3_CTL6 0x37 +#define ATC2609A_PMU_DC_ZR 0x38 +#define ATC2609A_PMU_LDO0_CTL0 0x39 +#define ATC2609A_PMU_LDO0_CTL1 0x3A +#define ATC2609A_PMU_LDO1_CTL0 0x3B +#define ATC2609A_PMU_LDO1_CTL1 0x3C +#define ATC2609A_PMU_LDO2_CTL0 0x3D +#define ATC2609A_PMU_LDO2_CTL1 0x3E +#define ATC2609A_PMU_LDO3_CTL0 0x3F +#define ATC2609A_PMU_LDO3_CTL1 0x40 +#define ATC2609A_PMU_LDO4_CTL0 0x41 +#define ATC2609A_PMU_LDO4_CTL1 0x42 +#define ATC2609A_PMU_LDO5_CTL0 0x43 +#define ATC2609A_PMU_LDO5_CTL1 0x44 +#define ATC2609A_PMU_LDO6_CTL0 0x45 +#define ATC2609A_PMU_LDO6_CTL1 0x46 +#define ATC2609A_PMU_LDO7_CTL0 0x47 +#define ATC2609A_PMU_LDO7_CTL1 0x48 +#define ATC2609A_PMU_LDO8_CTL0 0x49 +#define ATC2609A_PMU_LDO8_CTL1 0x4A +#define ATC2609A_PMU_LDO9_CTL 0x4B +#define ATC2609A_PMU_OV_INT_EN 0x4C +#define ATC2609A_PMU_OV_STATUS 0x4D +#define ATC2609A_PMU_UV_INT_EN 0x4E +#define ATC2609A_PMU_UV_STATUS 0x4F +#define ATC2609A_PMU_OC_INT_EN 0x50 +#define ATC2609A_PMU_OC_STATUS 0x51 +#define ATC2609A_PMU_OT_CTL 0x52 +#define ATC2609A_PMU_CM_CTL0 0x53 +#define ATC2609A_PMU_FW_USE0 0x54 +#define ATC2609A_PMU_FW_USE1 0x55 +#define ATC2609A_PMU_ADC12B_I 0x56 +#define ATC2609A_PMU_ADC12B_V 0x57 +#define ATC2609A_PMU_ADC12B_DUMMY 0x58 +#define ATC2609A_PMU_AUXADC_CTL0 0x59 +#define ATC2609A_PMU_AUXADC_CTL1 0x5A +#define ATC2609A_PMU_BATVADC 0x5B +#define ATC2609A_PMU_BATIADC 0x5C +#define ATC2609A_PMU_WALLVADC 0x5D +#define ATC2609A_PMU_WALLIADC 0x5E +#define ATC2609A_PMU_VBUSVADC 0x5F +#define ATC2609A_PMU_VBUSIADC 0x60 +#define ATC2609A_PMU_SYSPWRADC 0x61 +#define ATC2609A_PMU_REMCONADC 0x62 +#define ATC2609A_PMU_SVCCADC 0x63 +#define ATC2609A_PMU_CHGIADC 0x64 +#define ATC2609A_PMU_IREFADC 0x65 +#define ATC2609A_PMU_BAKBATADC 0x66 +#define ATC2609A_PMU_ICTEMPADC 0x67 +#define ATC2609A_PMU_AUXADC0 0x68 +#define ATC2609A_PMU_AUXADC1 0x69 +#define ATC2609A_PMU_AUXADC2 0x6A +#define ATC2609A_PMU_AUXADC3 0x6B +#define ATC2609A_PMU_ICTEMPADC_ADJ 0x6C +#define ATC2609A_PMU_BDG_CTL 0x6D +#define ATC2609A_RTC_CTL 0x6E +#define ATC2609A_RTC_MSALM 0x6F +#define ATC2609A_RTC_HALM 0x70 +#define ATC2609A_RTC_YMDALM 0x71 +#define ATC2609A_RTC_MS 0x72 +#define ATC2609A_RTC_H 0x73 +#define ATC2609A_RTC_DC 0x74 +#define ATC2609A_RTC_YMD 0x75 +#define ATC2609A_EFUSE_DAT 0x76 +#define ATC2609A_EFUSECRTL1 0x77 +#define ATC2609A_EFUSECRTL2 0x78 +#define ATC2609A_PMU_DC4_CTL0 0x79 +#define ATC2609A_PMU_DC4_CTL1 0x7A +#define ATC2609A_PMU_DC4_CTL2 0x7B +#define ATC2609A_PMU_DC4_CTL3 0x7C +#define ATC2609A_PMU_DC4_CTL4 0x7D +#define ATC2609A_PMU_DC4_CTL5 0x7E +#define ATC2609A_PMU_DC4_CTL6 0x7F +#define ATC2609A_PMU_PWR_STATUS 0x80 +#define ATC2609A_PMU_S2_PWR 0x81 +#define ATC2609A_CLMT_CTL0 0x82 +#define ATC2609A_CLMT_DATA0 0x83 +#define ATC2609A_CLMT_DATA1 0x84 +#define ATC2609A_CLMT_DATA2 0x85 +#define ATC2609A_CLMT_DATA3 0x86 +#define ATC2609A_CLMT_ADD0 0x87 +#define ATC2609A_CLMT_ADD1 0x88 +#define ATC2609A_CLMT_OCV_TABLE 0x89 +#define ATC2609A_CLMT_R_TABLE 0x8A +#define ATC2609A_PMU_PWRON_CTL0 0x8D +#define ATC2609A_PMU_PWRON_CTL1 0x8E +#define ATC2609A_PMU_PWRON_CTL2 0x8F +#define ATC2609A_IRC_CTL 0x90 +#define ATC2609A_IRC_STAT 0x91 +#define ATC2609A_IRC_CC 0x92 +#define ATC2609A_IRC_KDC 0x93 +#define ATC2609A_IRC_WK 0x94 +#define ATC2609A_IRC_RCC 0x95 + +/* AUDIO_OUT Registers */ +#define ATC2609A_AUDIOINOUT_CTL 0xA0 +#define ATC2609A_AUDIO_DEBUGOUTCTL 0xA1 +#define ATC2609A_DAC_DIGITALCTL 0xA2 +#define ATC2609A_DAC_VOLUMECTL0 0xA3 +#define ATC2609A_DAC_ANALOG0 0xA4 +#define ATC2609A_DAC_ANALOG1 0xA5 +#define ATC2609A_DAC_ANALOG2 0xA6 +#define ATC2609A_DAC_ANALOG3 0xA7 + +/* AUDIO_IN Registers */ +#define ATC2609A_ADC_DIGITALCTL 0xA8 +#define ATC2609A_ADC_HPFCTL 0xA9 +#define ATC2609A_ADC_CTL 0xAA +#define ATC2609A_AGC_CTL0 0xAB +#define ATC2609A_AGC_CTL1 0xAC +#define ATC2609A_AGC_CTL2 0xAD +#define ATC2609A_ADC_ANALOG0 0xAE +#define ATC2609A_ADC_ANALOG1 0xAF + +/* PCM_IF Registers */ +#define ATC2609A_PCM0_CTL 0xB0 +#define ATC2609A_PCM1_CTL 0xB1 +#define ATC2609A_PCM2_CTL 0xB2 +#define ATC2609A_PCMIF_CTL 0xB3 + +/* CMU_CONTROL Registers */ +#define ATC2609A_CMU_DEVRST 0xC1 + +/* INTS Registers */ +#define ATC2609A_INTS_PD 0xC8 +#define ATC2609A_INTS_MSK 0xC9 + +/* MFP Registers */ +#define ATC2609A_MFP_CTL 0xD0 +#define ATC2609A_PAD_VSEL 0xD1 +#define ATC2609A_GPIO_OUTEN 0xD2 +#define ATC2609A_GPIO_INEN 0xD3 +#define ATC2609A_GPIO_DAT 0xD4 +#define ATC2609A_PAD_DRV 0xD5 +#define ATC2609A_PAD_EN 0xD6 +#define ATC2609A_DEBUG_SEL 0xD7 +#define ATC2609A_DEBUG_IE 0xD8 +#define ATC2609A_DEBUG_OE 0xD9 +#define ATC2609A_CHIP_VER 0xDC + +/* PWSI Registers */ +#define ATC2609A_PWSI_CTL 0xF0 +#define ATC2609A_PWSI_STATUS 0xF1 + +/* TWSI Registers */ +#define ATC2609A_SADDR 0xFF + +/* PMU_SYS_CTL0 Register Mask Bits */ +#define ATC2609A_PMU_SYS_CTL0_IR_WK_EN BIT(5) +#define ATC2609A_PMU_SYS_CTL0_RESET_WK_EN BIT(6) +#define ATC2609A_PMU_SYS_CTL0_HDSW_WK_EN BIT(7) +#define ATC2609A_PMU_SYS_CTL0_ALARM_WK_EN BIT(8) +#define ATC2609A_PMU_SYS_CTL0_REM_CON_WK_EN BIT(9) +#define ATC2609A_PMU_SYS_CTL0_RESTART_EN BIT(10) +#define ATC2609A_PMU_SYS_CTL0_WKIRQ_WK_EN BIT(11) +#define ATC2609A_PMU_SYS_CTL0_ONOFF_SHORT_WK_EN BIT(12) +#define ATC2609A_PMU_SYS_CTL0_ONOFF_LONG_WK_EN BIT(13) +#define ATC2609A_PMU_SYS_CTL0_WALL_WK_EN BIT(14) +#define ATC2609A_PMU_SYS_CTL0_USB_WK_EN BIT(15) +#define ATC2609A_PMU_SYS_CTL0_WK_ALL (GENMASK(15, 5) & (~BIT(10))) + +/* PMU_SYS_CTL1 Register Mask Bits */ +#define ATC2609A_PMU_SYS_CTL1_EN_S1 BIT(0) +#define ATC2609A_PMU_SYS_CTL1_LB_S4_EN BIT(2) +#define ATC2609A_PMU_SYS_CTL1_LB_S4 GENMASK(4, 3) +#define ATC2609A_PMU_SYS_CTL1_LB_S4_3_1V BIT(4) +#define ATC2609A_PMU_SYS_CTL1_IR_WK_FLAG BIT(5) +#define ATC2609A_PMU_SYS_CTL1_RESET_WK_FLAG BIT(6) +#define ATC2609A_PMU_SYS_CTL1_HDSW_WK_FLAG BIT(7) +#define ATC2609A_PMU_SYS_CTL1_ALARM_WK_FLAG BIT(8) +#define ATC2609A_PMU_SYS_CTL1_REM_CON_WK_FLAG BIT(9) +#define ATC2609A_PMU_SYS_CTL1_RESTART_WK_FLAG BIT(10) +#define ATC2609A_PMU_SYS_CTL1_WKIRQ_WK_FLAG BIT(11) +#define ATC2609A_PMU_SYS_CTL1_ONOFF_SHORT_WK_FLAG BIT(12) +#define ATC2609A_PMU_SYS_CTL1_ONOFF_LONG_WK_FLAG BIT(13) +#define ATC2609A_PMU_SYS_CTL1_WALL_WK_FLAG BIT(14) +#define ATC2609A_PMU_SYS_CTL1_USB_WK_FLAG BIT(15) + +/* PMU_SYS_CTL2 Register Mask Bits */ +#define ATC2609A_PMU_SYS_CTL2_PMU_A_EN BIT(0) +#define ATC2609A_PMU_SYS_CTL2_ONOFF_PRESS_INT_EN BIT(1) +#define ATC2609A_PMU_SYS_CTL2_ONOFF_PRESS_PD BIT(2) +#define ATC2609A_PMU_SYS_CTL2_S2TIMER GENMASK(5, 3) +#define ATC2609A_PMU_SYS_CTL2_S2_TIMER_EN BIT(6) +#define ATC2609A_PMU_SYS_CTL2_ONOFF_RESET_TIME_SEL GENMASK(8, 7) +#define ATC2609A_PMU_SYS_CTL2_ONOFF_RESET_EN BIT(9) +#define ATC2609A_PMU_SYS_CTL2_ONOFF_PRESS_TIME GENMASK(11, 10) +#define ATC2609A_PMU_SYS_CTL2_ONOFF_LSP_INT_EN BIT(12) +#define ATC2609A_PMU_SYS_CTL2_ONOFF_LONG_PRESS BIT(13) +#define ATC2609A_PMU_SYS_CTL2_ONOFF_SHORT_PRESS BIT(14) +#define ATC2609A_PMU_SYS_CTL2_ONOFF_PRESS BIT(15) + +/* PMU_SYS_CTL3 Register Mask Bits */ +#define ATC2609A_PMU_SYS_CTL3_S2S3TOS1_TIMER GENMASK(8, 7) +#define ATC2609A_PMU_SYS_CTL3_S2S3TOS1_TIMER_EN BIT(9) +#define ATC2609A_PMU_SYS_CTL3_S3_TIMER GENMASK(12, 10) +#define ATC2609A_PMU_SYS_CTL3_S3_TIMER_EN BIT(13) +#define ATC2609A_PMU_SYS_CTL3_EN_S3 BIT(14) +#define ATC2609A_PMU_SYS_CTL3_EN_S2 BIT(15) + +/* PMU_SYS_CTL5 Register Mask Bits */ +#define ATC2609A_PMU_SYS_CTL5_WALLWKDTEN BIT(7) +#define ATC2609A_PMU_SYS_CTL5_VBUSWKDTEN BIT(8) +#define ATC2609A_PMU_SYS_CTL5_REMCON_DECT_EN BIT(9) +#define ATC2609A_PMU_SYS_CTL5_ONOFF_8S_SEL BIT(10) + +/* INTS_MSK Register Mask Bits */ +#define ATC2609A_INTS_MSK_AUDIO BIT(0) +#define ATC2609A_INTS_MSK_OV BIT(1) +#define ATC2609A_INTS_MSK_OC BIT(2) +#define ATC2609A_INTS_MSK_OT BIT(3) +#define ATC2609A_INTS_MSK_UV BIT(4) +#define ATC2609A_INTS_MSK_ALARM BIT(5) +#define ATC2609A_INTS_MSK_ONOFF BIT(6) +#define ATC2609A_INTS_MSK_WKUP BIT(7) +#define ATC2609A_INTS_MSK_IR BIT(8) +#define ATC2609A_INTS_MSK_REMCON BIT(9) +#define ATC2609A_INTS_MSK_POWERIN BIT(10) + +/* CMU_DEVRST Register Mask Bits */ +#define ATC2609A_CMU_DEVRST_AUDIO BIT(0) +#define ATC2609A_CMU_DEVRST_MFP BIT(1) +#define ATC2609A_CMU_DEVRST_INTS BIT(2) + +/* PAD_EN Register Mask Bits */ +#define ATC2609A_PAD_EN_EXTIRQ BIT(0) + +#endif /* __LINUX_MFD_ATC260X_ATC2609A_H */ diff --git a/include/linux/mfd/atc260x/core.h b/include/linux/mfd/atc260x/core.h new file mode 100644 index 000000000000..777b6c345d44 --- /dev/null +++ b/include/linux/mfd/atc260x/core.h @@ -0,0 +1,58 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Core MFD defines for ATC260x PMICs + * + * Copyright (C) 2019 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + * Copyright (C) 2020 Cristian Ciocaltea <cristian.ciocaltea@gmail.com> + */ + +#ifndef __LINUX_MFD_ATC260X_CORE_H +#define __LINUX_MFD_ATC260X_CORE_H + +#include <linux/mfd/atc260x/atc2603c.h> +#include <linux/mfd/atc260x/atc2609a.h> + +enum atc260x_type { + ATC2603A = 0, + ATC2603C, + ATC2609A, +}; + +enum atc260x_ver { + ATC260X_A = 0, + ATC260X_B, + ATC260X_C, + ATC260X_D, + ATC260X_E, + ATC260X_F, + ATC260X_G, + ATC260X_H, +}; + +struct atc260x { + struct device *dev; + + struct regmap *regmap; + const struct regmap_irq_chip *regmap_irq_chip; + struct regmap_irq_chip_data *irq_data; + + struct mutex *regmap_mutex; /* mutex for custom regmap locking */ + + const struct mfd_cell *cells; + int nr_cells; + int irq; + + enum atc260x_type ic_type; + enum atc260x_ver ic_ver; + const char *type_name; + unsigned int rev_reg; + + const struct atc260x_init_regs *init_regs; /* regs for device init */ +}; + +struct regmap_config; + +int atc260x_match_device(struct atc260x *atc260x, struct regmap_config *regmap_cfg); +int atc260x_device_probe(struct atc260x *atc260x); + +#endif /* __LINUX_MFD_ATC260X_CORE_H */ diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h index 2009c4b936d9..0bc7cba798a3 100644 --- a/include/linux/mfd/core.h +++ b/include/linux/mfd/core.h @@ -50,7 +50,7 @@ #define MFD_DEP_LEVEL_HIGH 1 struct irq_domain; -struct property_entry; +struct software_node; /* Matches ACPI PNP id, either _HID or _CID, or ACPI _ADR */ struct mfd_cell_acpi_match { @@ -78,8 +78,8 @@ struct mfd_cell { void *platform_data; size_t pdata_size; - /* device properties passed to the sub devices drivers */ - const struct property_entry *properties; + /* Software node for the device. */ + const struct software_node *swnode; /* * Device Tree compatible string diff --git a/include/linux/mfd/da9063/registers.h b/include/linux/mfd/da9063/registers.h index 1dbabf1b3cb8..6e0f66a2e727 100644 --- a/include/linux/mfd/da9063/registers.h +++ b/include/linux/mfd/da9063/registers.h @@ -1037,6 +1037,9 @@ #define DA9063_NONKEY_PIN_AUTODOWN 0x02 #define DA9063_NONKEY_PIN_AUTOFLPRT 0x03 +/* DA9063_REG_CONFIG_J (addr=0x10F) */ +#define DA9063_TWOWIRE_TO 0x40 + /* DA9063_REG_MON_REG_5 (addr=0x116) */ #define DA9063_MON_A8_IDX_MASK 0x07 #define DA9063_MON_A8_IDX_NONE 0x00 diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h index 4b63d3ecdcff..a62de3d155ed 100644 --- a/include/linux/mfd/db8500-prcmu.h +++ b/include/linux/mfd/db8500-prcmu.h @@ -720,7 +720,7 @@ static inline int db8500_prcmu_load_a9wdog(u8 id, u32 val) static inline bool db8500_prcmu_is_ac_wake_requested(void) { - return 0; + return false; } static inline int db8500_prcmu_set_arm_opp(u8 opp) diff --git a/include/linux/mfd/intel-m10-bmc.h b/include/linux/mfd/intel-m10-bmc.h index 74d4e193966a..f0044b14136e 100644 --- a/include/linux/mfd/intel-m10-bmc.h +++ b/include/linux/mfd/intel-m10-bmc.h @@ -9,9 +9,15 @@ #include <linux/regmap.h> -#define M10BMC_LEGACY_SYS_BASE 0x300400 +#define M10BMC_LEGACY_BUILD_VER 0x300468 #define M10BMC_SYS_BASE 0x300800 -#define M10BMC_MEM_END 0x200000fc +#define M10BMC_SYS_END 0x300fff +#define M10BMC_FLASH_BASE 0x10000000 +#define M10BMC_FLASH_END 0x1fffffff +#define M10BMC_MEM_END M10BMC_FLASH_END + +#define M10BMC_STAGING_BASE 0x18000000 +#define M10BMC_STAGING_SIZE 0x3800000 /* Register offset of system registers */ #define NIOS2_FW_VERSION 0x0 @@ -30,6 +36,88 @@ #define M10BMC_VER_PCB_INFO_MSK GENMASK(31, 24) #define M10BMC_VER_LEGACY_INVALID 0xffffffff +/* Secure update doorbell register, in system register region */ +#define M10BMC_DOORBELL 0x400 + +/* Authorization Result register, in system register region */ +#define M10BMC_AUTH_RESULT 0x404 + +/* Doorbell register fields */ +#define DRBL_RSU_REQUEST BIT(0) +#define DRBL_RSU_PROGRESS GENMASK(7, 4) +#define DRBL_HOST_STATUS GENMASK(11, 8) +#define DRBL_RSU_STATUS GENMASK(23, 16) +#define DRBL_PKVL_EEPROM_LOAD_SEC BIT(24) +#define DRBL_PKVL1_POLL_EN BIT(25) +#define DRBL_PKVL2_POLL_EN BIT(26) +#define DRBL_CONFIG_SEL BIT(28) +#define DRBL_REBOOT_REQ BIT(29) +#define DRBL_REBOOT_DISABLED BIT(30) + +/* Progress states */ +#define RSU_PROG_IDLE 0x0 +#define RSU_PROG_PREPARE 0x1 +#define RSU_PROG_READY 0x3 +#define RSU_PROG_AUTHENTICATING 0x4 +#define RSU_PROG_COPYING 0x5 +#define RSU_PROG_UPDATE_CANCEL 0x6 +#define RSU_PROG_PROGRAM_KEY_HASH 0x7 +#define RSU_PROG_RSU_DONE 0x8 +#define RSU_PROG_PKVL_PROM_DONE 0x9 + +/* Device and error states */ +#define RSU_STAT_NORMAL 0x0 +#define RSU_STAT_TIMEOUT 0x1 +#define RSU_STAT_AUTH_FAIL 0x2 +#define RSU_STAT_COPY_FAIL 0x3 +#define RSU_STAT_FATAL 0x4 +#define RSU_STAT_PKVL_REJECT 0x5 +#define RSU_STAT_NON_INC 0x6 +#define RSU_STAT_ERASE_FAIL 0x7 +#define RSU_STAT_WEAROUT 0x8 +#define RSU_STAT_NIOS_OK 0x80 +#define RSU_STAT_USER_OK 0x81 +#define RSU_STAT_FACTORY_OK 0x82 +#define RSU_STAT_USER_FAIL 0x83 +#define RSU_STAT_FACTORY_FAIL 0x84 +#define RSU_STAT_NIOS_FLASH_ERR 0x85 +#define RSU_STAT_FPGA_FLASH_ERR 0x86 + +#define HOST_STATUS_IDLE 0x0 +#define HOST_STATUS_WRITE_DONE 0x1 +#define HOST_STATUS_ABORT_RSU 0x2 + +#define rsu_prog(doorbell) FIELD_GET(DRBL_RSU_PROGRESS, doorbell) +#define rsu_stat(doorbell) FIELD_GET(DRBL_RSU_STATUS, doorbell) + +/* interval 100ms and timeout 5s */ +#define NIOS_HANDSHAKE_INTERVAL_US (100 * 1000) +#define NIOS_HANDSHAKE_TIMEOUT_US (5 * 1000 * 1000) + +/* RSU PREP Timeout (2 minutes) to erase flash staging area */ +#define RSU_PREP_INTERVAL_MS 100 +#define RSU_PREP_TIMEOUT_MS (2 * 60 * 1000) + +/* RSU Complete Timeout (40 minutes) for full flash update */ +#define RSU_COMPLETE_INTERVAL_MS 1000 +#define RSU_COMPLETE_TIMEOUT_MS (40 * 60 * 1000) + +/* Addresses for security related data in FLASH */ +#define BMC_REH_ADDR 0x17ffc004 +#define BMC_PROG_ADDR 0x17ffc000 +#define BMC_PROG_MAGIC 0x5746 + +#define SR_REH_ADDR 0x17ffd004 +#define SR_PROG_ADDR 0x17ffd000 +#define SR_PROG_MAGIC 0x5253 + +#define PR_REH_ADDR 0x17ffe004 +#define PR_PROG_ADDR 0x17ffe000 +#define PR_PROG_MAGIC 0x5250 + +/* Address of 4KB inverted bit vector containing staging area FLASH count */ +#define STAGING_FLASH_COUNT 0x17ffb000 + /** * struct intel_m10bmc - Intel MAX 10 BMC parent driver data structure * @dev: this device diff --git a/include/linux/mfd/lp87565.h b/include/linux/mfd/lp87565.h index d44ddfb6bb63..5640e6088fe6 100644 --- a/include/linux/mfd/lp87565.h +++ b/include/linux/mfd/lp87565.h @@ -237,9 +237,6 @@ enum lp87565_device_type { #define LP87565_GOIO2_OUT BIT(1) #define LP87565_GOIO1_OUT BIT(0) -/* Number of step-down converters available */ -#define LP87565_NUM_BUCK 6 - enum LP87565_regulator_id { /* BUCK's */ LP87565_BUCK_0, diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h index e955e2f0a2cc..6c98edcf4b0b 100644 --- a/include/linux/mfd/max8997.h +++ b/include/linux/mfd/max8997.h @@ -14,13 +14,13 @@ * others and b) it can be enabled simply by using MAX17042 driver. */ -#ifndef __LINUX_MFD_MAX8998_H -#define __LINUX_MFD_MAX8998_H +#ifndef __LINUX_MFD_MAX8997_H +#define __LINUX_MFD_MAX8997_H #include <linux/regulator/consumer.h> /* MAX8997/8966 regulator IDs */ -enum max8998_regulators { +enum max8997_regulators { MAX8997_LDO1 = 0, MAX8997_LDO2, MAX8997_LDO3, @@ -207,4 +207,4 @@ struct max8997_platform_data { struct max8997_led_platform_data *led_pdata; }; -#endif /* __LINUX_MFD_MAX8998_H */ +#endif /* __LINUX_MFD_MAX8997_H */ diff --git a/include/linux/mfd/ntxec.h b/include/linux/mfd/ntxec.h new file mode 100644 index 000000000000..26ab3b8eb612 --- /dev/null +++ b/include/linux/mfd/ntxec.h @@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright 2020 Jonathan Neuschäfer + * + * Register access and version information for the Netronix embedded + * controller. + */ + +#ifndef NTXEC_H +#define NTXEC_H + +#include <linux/types.h> + +struct device; +struct regmap; + +struct ntxec { + struct device *dev; + struct regmap *regmap; +}; + +/* + * Some registers, such as the battery status register (0x41), are in + * big-endian, but others only have eight significant bits, which are in the + * first byte transmitted over I2C (the MSB of the big-endian value). + * This convenience function converts an 8-bit value to 16-bit for use in the + * second kind of register. + */ +static inline __be16 ntxec_reg8(u8 value) +{ + return value << 8; +} + +/* Known firmware versions */ +#define NTXEC_VERSION_KOBO_AURA 0xd726 /* found in Kobo Aura */ +#define NTXEC_VERSION_TOLINO_SHINE2 0xf110 /* found in Tolino Shine 2 HD */ + +#endif diff --git a/include/linux/mfd/rn5t618.h b/include/linux/mfd/rn5t618.h index fba0df13d9a8..8aa0bda1af4f 100644 --- a/include/linux/mfd/rn5t618.h +++ b/include/linux/mfd/rn5t618.h @@ -188,6 +188,7 @@ #define RN5T618_CHGOSCSCORESET3 0xd7 #define RN5T618_CHGOSCFREQSET1 0xd8 #define RN5T618_CHGOSCFREQSET2 0xd9 +#define RN5T618_GCHGDET 0xda #define RN5T618_CONTROL 0xe0 #define RN5T618_SOC 0xe1 #define RN5T618_RE_CAP_H 0xe2 diff --git a/include/linux/mfd/rohm-bd71815.h b/include/linux/mfd/rohm-bd71815.h new file mode 100644 index 000000000000..ec6d9612bebe --- /dev/null +++ b/include/linux/mfd/rohm-bd71815.h @@ -0,0 +1,562 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright 2021 ROHM Semiconductors. + * + * Author: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> + * + * Copyright 2014 Embest Technology Co. Ltd. Inc. + * + * Author: yanglsh@embest-tech.com + */ + +#ifndef _MFD_BD71815_H +#define _MFD_BD71815_H + +#include <linux/regmap.h> + +enum { + BD71815_BUCK1 = 0, + BD71815_BUCK2, + BD71815_BUCK3, + BD71815_BUCK4, + BD71815_BUCK5, + /* General Purpose */ + BD71815_LDO1, + BD71815_LDO2, + BD71815_LDO3, + /* LDOs for SD Card and SD Card Interface */ + BD71815_LDO4, + BD71815_LDO5, + /* LDO for DDR Reference Voltage */ + BD71815_LDODVREF, + /* LDO for Low-Power State Retention */ + BD71815_LDOLPSR, + BD71815_WLED, + BD71815_REGULATOR_CNT, +}; + +#define BD71815_SUPPLY_STATE_ENABLED 0x1 + +enum { + BD71815_REG_DEVICE = 0, + BD71815_REG_PWRCTRL, + BD71815_REG_BUCK1_MODE, + BD71815_REG_BUCK2_MODE, + BD71815_REG_BUCK3_MODE, + BD71815_REG_BUCK4_MODE, + BD71815_REG_BUCK5_MODE, + BD71815_REG_BUCK1_VOLT_H, + BD71815_REG_BUCK1_VOLT_L, + BD71815_REG_BUCK2_VOLT_H, + BD71815_REG_BUCK2_VOLT_L, + BD71815_REG_BUCK3_VOLT, + BD71815_REG_BUCK4_VOLT, + BD71815_REG_BUCK5_VOLT, + BD71815_REG_LED_CTRL, + BD71815_REG_LED_DIMM, + BD71815_REG_LDO_MODE1, + BD71815_REG_LDO_MODE2, + BD71815_REG_LDO_MODE3, + BD71815_REG_LDO_MODE4, + BD71815_REG_LDO1_VOLT, + BD71815_REG_LDO2_VOLT, + BD71815_REG_LDO3_VOLT, + BD71815_REG_LDO4_VOLT, + BD71815_REG_LDO5_VOLT_H, + BD71815_REG_LDO5_VOLT_L, + BD71815_REG_BUCK_PD_DIS, + BD71815_REG_LDO_PD_DIS, + BD71815_REG_GPO, + BD71815_REG_OUT32K, + BD71815_REG_SEC, + BD71815_REG_MIN, + BD71815_REG_HOUR, + BD71815_REG_WEEK, + BD71815_REG_DAY, + BD71815_REG_MONTH, + BD71815_REG_YEAR, + BD71815_REG_ALM0_SEC, + + BD71815_REG_ALM1_SEC = 0x2C, + + BD71815_REG_ALM0_MASK = 0x33, + BD71815_REG_ALM1_MASK, + BD71815_REG_ALM2, + BD71815_REG_TRIM, + BD71815_REG_CONF, + BD71815_REG_SYS_INIT, + BD71815_REG_CHG_STATE, + BD71815_REG_CHG_LAST_STATE, + BD71815_REG_BAT_STAT, + BD71815_REG_DCIN_STAT, + BD71815_REG_VSYS_STAT, + BD71815_REG_CHG_STAT, + BD71815_REG_CHG_WDT_STAT, + BD71815_REG_BAT_TEMP, + BD71815_REG_IGNORE_0, + BD71815_REG_INHIBIT_0, + BD71815_REG_DCIN_CLPS, + BD71815_REG_VSYS_REG, + BD71815_REG_VSYS_MAX, + BD71815_REG_VSYS_MIN, + BD71815_REG_CHG_SET1, + BD71815_REG_CHG_SET2, + BD71815_REG_CHG_WDT_PRE, + BD71815_REG_CHG_WDT_FST, + BD71815_REG_CHG_IPRE, + BD71815_REG_CHG_IFST, + BD71815_REG_CHG_IFST_TERM, + BD71815_REG_CHG_VPRE, + BD71815_REG_CHG_VBAT_1, + BD71815_REG_CHG_VBAT_2, + BD71815_REG_CHG_VBAT_3, + BD71815_REG_CHG_LED_1, + BD71815_REG_VF_TH, + BD71815_REG_BAT_SET_1, + BD71815_REG_BAT_SET_2, + BD71815_REG_BAT_SET_3, + BD71815_REG_ALM_VBAT_TH_U, + BD71815_REG_ALM_VBAT_TH_L, + BD71815_REG_ALM_DCIN_TH, + BD71815_REG_ALM_VSYS_TH, + BD71815_REG_VM_IBAT_U, + BD71815_REG_VM_IBAT_L, + BD71815_REG_VM_VBAT_U, + BD71815_REG_VM_VBAT_L, + BD71815_REG_VM_BTMP, + BD71815_REG_VM_VTH, + BD71815_REG_VM_DCIN_U, + BD71815_REG_VM_DCIN_L, + BD71815_REG_VM_VSYS, + BD71815_REG_VM_VF, + BD71815_REG_VM_OCI_PRE_U, + BD71815_REG_VM_OCI_PRE_L, + BD71815_REG_VM_OCV_PRE_U, + BD71815_REG_VM_OCV_PRE_L, + BD71815_REG_VM_OCI_PST_U, + BD71815_REG_VM_OCI_PST_L, + BD71815_REG_VM_OCV_PST_U, + BD71815_REG_VM_OCV_PST_L, + BD71815_REG_VM_SA_VBAT_U, + BD71815_REG_VM_SA_VBAT_L, + BD71815_REG_VM_SA_IBAT_U, + BD71815_REG_VM_SA_IBAT_L, + BD71815_REG_CC_CTRL, + BD71815_REG_CC_BATCAP1_TH_U, + BD71815_REG_CC_BATCAP1_TH_L, + BD71815_REG_CC_BATCAP2_TH_U, + BD71815_REG_CC_BATCAP2_TH_L, + BD71815_REG_CC_BATCAP3_TH_U, + BD71815_REG_CC_BATCAP3_TH_L, + BD71815_REG_CC_STAT, + BD71815_REG_CC_CCNTD_3, + BD71815_REG_CC_CCNTD_2, + BD71815_REG_CC_CCNTD_1, + BD71815_REG_CC_CCNTD_0, + BD71815_REG_CC_CURCD_U, + BD71815_REG_CC_CURCD_L, + BD71815_REG_VM_OCUR_THR_1, + BD71815_REG_VM_OCUR_DUR_1, + BD71815_REG_VM_OCUR_THR_2, + BD71815_REG_VM_OCUR_DUR_2, + BD71815_REG_VM_OCUR_THR_3, + BD71815_REG_VM_OCUR_DUR_3, + BD71815_REG_VM_OCUR_MON, + BD71815_REG_VM_BTMP_OV_THR, + BD71815_REG_VM_BTMP_OV_DUR, + BD71815_REG_VM_BTMP_LO_THR, + BD71815_REG_VM_BTMP_LO_DUR, + BD71815_REG_VM_BTMP_MON, + BD71815_REG_INT_EN_01, + + BD71815_REG_INT_EN_11 = 0x95, + BD71815_REG_INT_EN_12, + BD71815_REG_INT_STAT, + BD71815_REG_INT_STAT_01, + BD71815_REG_INT_STAT_02, + BD71815_REG_INT_STAT_03, + BD71815_REG_INT_STAT_04, + BD71815_REG_INT_STAT_05, + BD71815_REG_INT_STAT_06, + BD71815_REG_INT_STAT_07, + BD71815_REG_INT_STAT_08, + BD71815_REG_INT_STAT_09, + BD71815_REG_INT_STAT_10, + BD71815_REG_INT_STAT_11, + BD71815_REG_INT_STAT_12, + BD71815_REG_INT_UPDATE, + + BD71815_REG_VM_VSYS_U = 0xC0, + BD71815_REG_VM_VSYS_L, + BD71815_REG_VM_SA_VSYS_U, + BD71815_REG_VM_SA_VSYS_L, + + BD71815_REG_VM_SA_IBAT_MIN_U = 0xD0, + BD71815_REG_VM_SA_IBAT_MIN_L, + BD71815_REG_VM_SA_IBAT_MAX_U, + BD71815_REG_VM_SA_IBAT_MAX_L, + BD71815_REG_VM_SA_VBAT_MIN_U, + BD71815_REG_VM_SA_VBAT_MIN_L, + BD71815_REG_VM_SA_VBAT_MAX_U, + BD71815_REG_VM_SA_VBAT_MAX_L, + BD71815_REG_VM_SA_VSYS_MIN_U, + BD71815_REG_VM_SA_VSYS_MIN_L, + BD71815_REG_VM_SA_VSYS_MAX_U, + BD71815_REG_VM_SA_VSYS_MAX_L, + BD71815_REG_VM_SA_MINMAX_CLR, + + BD71815_REG_REX_CCNTD_3 = 0xE0, + BD71815_REG_REX_CCNTD_2, + BD71815_REG_REX_CCNTD_1, + BD71815_REG_REX_CCNTD_0, + BD71815_REG_REX_SA_VBAT_U, + BD71815_REG_REX_SA_VBAT_L, + BD71815_REG_REX_CTRL_1, + BD71815_REG_REX_CTRL_2, + BD71815_REG_FULL_CCNTD_3, + BD71815_REG_FULL_CCNTD_2, + BD71815_REG_FULL_CCNTD_1, + BD71815_REG_FULL_CCNTD_0, + BD71815_REG_FULL_CTRL, + + BD71815_REG_CCNTD_CHG_3 = 0xF0, + BD71815_REG_CCNTD_CHG_2, + + BD71815_REG_TEST_MODE = 0xFE, + BD71815_MAX_REGISTER, +}; + +/* BD71815_REG_BUCK1_MODE bits */ +#define BD71815_BUCK_RAMPRATE_MASK 0xC0 +#define BD71815_BUCK_RAMPRATE_10P00MV 0x0 +#define BD71815_BUCK_RAMPRATE_5P00MV 0x01 +#define BD71815_BUCK_RAMPRATE_2P50MV 0x02 +#define BD71815_BUCK_RAMPRATE_1P25MV 0x03 + +#define BD71815_BUCK_PWM_FIXED BIT(4) +#define BD71815_BUCK_SNVS_ON BIT(3) +#define BD71815_BUCK_RUN_ON BIT(2) +#define BD71815_BUCK_LPSR_ON BIT(1) +#define BD71815_BUCK_SUSP_ON BIT(0) + +/* BD71815_REG_BUCK1_VOLT_H bits */ +#define BD71815_BUCK_DVSSEL BIT(7) +#define BD71815_BUCK_STBY_DVS BIT(6) +#define BD71815_VOLT_MASK 0x3F +#define BD71815_BUCK1_H_DEFAULT 0x14 +#define BD71815_BUCK1_L_DEFAULT 0x14 + +/* BD71815_REG_BUCK2_VOLT_H bits */ +#define BD71815_BUCK2_H_DEFAULT 0x14 +#define BD71815_BUCK2_L_DEFAULT 0x14 + +/* WLED output */ +/* current register mask */ +#define LED_DIMM_MASK 0x3f +/* LED enable bits at LED_CTRL reg */ +#define LED_CHGDONE_EN BIT(4) +#define LED_RUN_ON BIT(2) +#define LED_LPSR_ON BIT(1) +#define LED_SUSP_ON BIT(0) + +/* BD71815_REG_LDO1_CTRL bits */ +#define LDO1_EN BIT(0) +#define LDO2_EN BIT(1) +#define LDO3_EN BIT(2) +#define DVREF_EN BIT(3) +#define VOSNVS_SW_EN BIT(4) + +/* LDO_MODE1_register */ +#define LDO1_SNVS_ON BIT(7) +#define LDO1_RUN_ON BIT(6) +#define LDO1_LPSR_ON BIT(5) +#define LDO1_SUSP_ON BIT(4) +/* set => register control, unset => GPIO control */ +#define LDO4_MODE_MASK BIT(3) +#define LDO4_MODE_I2C BIT(3) +#define LDO4_MODE_GPIO 0 +/* set => register control, unset => start when DCIN connected */ +#define LDO3_MODE_MASK BIT(2) +#define LDO3_MODE_I2C BIT(2) +#define LDO3_MODE_DCIN 0 + +/* LDO_MODE2 register */ +#define LDO3_SNVS_ON BIT(7) +#define LDO3_RUN_ON BIT(6) +#define LDO3_LPSR_ON BIT(5) +#define LDO3_SUSP_ON BIT(4) +#define LDO2_SNVS_ON BIT(3) +#define LDO2_RUN_ON BIT(2) +#define LDO2_LPSR_ON BIT(1) +#define LDO2_SUSP_ON BIT(0) + + +/* LDO_MODE3 register */ +#define LDO5_SNVS_ON BIT(7) +#define LDO5_RUN_ON BIT(6) +#define LDO5_LPSR_ON BIT(5) +#define LDO5_SUSP_ON BIT(4) +#define LDO4_SNVS_ON BIT(3) +#define LDO4_RUN_ON BIT(2) +#define LDO4_LPSR_ON BIT(1) +#define LDO4_SUSP_ON BIT(0) + +/* LDO_MODE4 register */ +#define DVREF_SNVS_ON BIT(7) +#define DVREF_RUN_ON BIT(6) +#define DVREF_LPSR_ON BIT(5) +#define DVREF_SUSP_ON BIT(4) +#define LDO_LPSR_SNVS_ON BIT(3) +#define LDO_LPSR_RUN_ON BIT(2) +#define LDO_LPSR_LPSR_ON BIT(1) +#define LDO_LPSR_SUSP_ON BIT(0) + +/* BD71815_REG_OUT32K bits */ +#define OUT32K_EN BIT(0) +#define OUT32K_MODE BIT(1) +#define OUT32K_MODE_CMOS BIT(1) +#define OUT32K_MODE_OPEN_DRAIN 0 + +/* BD71815_REG_BAT_STAT bits */ +#define BAT_DET BIT(5) +#define BAT_DET_OFFSET 5 +#define BAT_DET_DONE BIT(4) +#define VBAT_OV BIT(3) +#define DBAT_DET BIT(0) + +/* BD71815_REG_VBUS_STAT bits */ +#define VBUS_DET BIT(0) + +#define BD71815_REG_RTC_START BD71815_REG_SEC +#define BD71815_REG_RTC_ALM_START BD71815_REG_ALM0_SEC + +/* BD71815_REG_ALM0_MASK bits */ +#define A0_ONESEC BIT(7) + +/* BD71815_REG_INT_EN_00 bits */ +#define ALMALE BIT(0) + +/* BD71815_REG_INT_STAT_03 bits */ +#define DCIN_MON_DET BIT(1) +#define DCIN_MON_RES BIT(0) +#define POWERON_LONG BIT(2) +#define POWERON_MID BIT(3) +#define POWERON_SHORT BIT(4) +#define POWERON_PRESS BIT(5) + +/* BD71805_REG_INT_STAT_08 bits */ +#define VBAT_MON_DET BIT(1) +#define VBAT_MON_RES BIT(0) + +/* BD71805_REG_INT_STAT_11 bits */ +#define INT_STAT_11_VF_DET BIT(7) +#define INT_STAT_11_VF_RES BIT(6) +#define INT_STAT_11_VF125_DET BIT(5) +#define INT_STAT_11_VF125_RES BIT(4) +#define INT_STAT_11_OVTMP_DET BIT(3) +#define INT_STAT_11_OVTMP_RES BIT(2) +#define INT_STAT_11_LOTMP_DET BIT(1) +#define INT_STAT_11_LOTMP_RES BIT(0) + +#define VBAT_MON_DET BIT(1) +#define VBAT_MON_RES BIT(0) + +/* BD71815_REG_PWRCTRL bits */ +#define RESTARTEN BIT(0) + +/* BD71815_REG_GPO bits */ +#define READY_FORCE_LOW BIT(2) +#define BD71815_GPIO_DRIVE_MASK BIT(4) +#define BD71815_GPIO_OPEN_DRAIN 0 +#define BD71815_GPIO_CMOS BIT(4) + +/* BD71815 interrupt masks */ +enum { + BD71815_INT_EN_01_BUCKAST_MASK = 0x0F, + BD71815_INT_EN_02_DCINAST_MASK = 0x3E, + BD71815_INT_EN_03_DCINAST_MASK = 0x3F, + BD71815_INT_EN_04_VSYSAST_MASK = 0xCF, + BD71815_INT_EN_05_CHGAST_MASK = 0xFC, + BD71815_INT_EN_06_BATAST_MASK = 0xF3, + BD71815_INT_EN_07_BMONAST_MASK = 0xFE, + BD71815_INT_EN_08_BMONAST_MASK = 0x03, + BD71815_INT_EN_09_BMONAST_MASK = 0x07, + BD71815_INT_EN_10_BMONAST_MASK = 0x3F, + BD71815_INT_EN_11_TMPAST_MASK = 0xFF, + BD71815_INT_EN_12_ALMAST_MASK = 0x07, +}; +/* BD71815 interrupt irqs */ +enum { + /* BUCK reg interrupts */ + BD71815_INT_BUCK1_OCP, + BD71815_INT_BUCK2_OCP, + BD71815_INT_BUCK3_OCP, + BD71815_INT_BUCK4_OCP, + BD71815_INT_BUCK5_OCP, + BD71815_INT_LED_OVP, + BD71815_INT_LED_OCP, + BD71815_INT_LED_SCP, + /* DCIN1 interrupts */ + BD71815_INT_DCIN_RMV, + BD71815_INT_CLPS_OUT, + BD71815_INT_CLPS_IN, + BD71815_INT_DCIN_OVP_RES, + BD71815_INT_DCIN_OVP_DET, + /* DCIN2 interrupts */ + BD71815_INT_DCIN_MON_RES, + BD71815_INT_DCIN_MON_DET, + BD71815_INT_WDOG, + /* Vsys INT_STAT_04 */ + BD71815_INT_VSYS_UV_RES, + BD71815_INT_VSYS_UV_DET, + BD71815_INT_VSYS_LOW_RES, + BD71815_INT_VSYS_LOW_DET, + BD71815_INT_VSYS_MON_RES, + BD71815_INT_VSYS_MON_DET, + /* Charger INT_STAT_05 */ + BD71815_INT_CHG_WDG_TEMP, + BD71815_INT_CHG_WDG_TIME, + BD71815_INT_CHG_RECHARGE_RES, + BD71815_INT_CHG_RECHARGE_DET, + BD71815_INT_CHG_RANGED_TEMP_TRANSITION, + BD71815_INT_CHG_STATE_TRANSITION, + /* Battery INT_STAT_06 */ + BD71815_INT_BAT_TEMP_NORMAL, + BD71815_INT_BAT_TEMP_ERANGE, + BD71815_INT_BAT_REMOVED, + BD71815_INT_BAT_DETECTED, + BD71815_INT_THERM_REMOVED, + BD71815_INT_THERM_DETECTED, + /* Battery Mon 1 INT_STAT_07 */ + BD71815_INT_BAT_DEAD, + BD71815_INT_BAT_SHORTC_RES, + BD71815_INT_BAT_SHORTC_DET, + BD71815_INT_BAT_LOW_VOLT_RES, + BD71815_INT_BAT_LOW_VOLT_DET, + BD71815_INT_BAT_OVER_VOLT_RES, + BD71815_INT_BAT_OVER_VOLT_DET, + /* Battery Mon 2 INT_STAT_08 */ + BD71815_INT_BAT_MON_RES, + BD71815_INT_BAT_MON_DET, + /* Battery Mon 3 (Coulomb counter) INT_STAT_09 */ + BD71815_INT_BAT_CC_MON1, + BD71815_INT_BAT_CC_MON2, + BD71815_INT_BAT_CC_MON3, + /* Battery Mon 4 INT_STAT_10 */ + BD71815_INT_BAT_OVER_CURR_1_RES, + BD71815_INT_BAT_OVER_CURR_1_DET, + BD71815_INT_BAT_OVER_CURR_2_RES, + BD71815_INT_BAT_OVER_CURR_2_DET, + BD71815_INT_BAT_OVER_CURR_3_RES, + BD71815_INT_BAT_OVER_CURR_3_DET, + /* Temperature INT_STAT_11 */ + BD71815_INT_TEMP_BAT_LOW_RES, + BD71815_INT_TEMP_BAT_LOW_DET, + BD71815_INT_TEMP_BAT_HI_RES, + BD71815_INT_TEMP_BAT_HI_DET, + BD71815_INT_TEMP_CHIP_OVER_125_RES, + BD71815_INT_TEMP_CHIP_OVER_125_DET, + BD71815_INT_TEMP_CHIP_OVER_VF_RES, + BD71815_INT_TEMP_CHIP_OVER_VF_DET, + /* RTC Alarm INT_STAT_12 */ + BD71815_INT_RTC0, + BD71815_INT_RTC1, + BD71815_INT_RTC2, +}; + +#define BD71815_INT_BUCK1_OCP_MASK BIT(0) +#define BD71815_INT_BUCK2_OCP_MASK BIT(1) +#define BD71815_INT_BUCK3_OCP_MASK BIT(2) +#define BD71815_INT_BUCK4_OCP_MASK BIT(3) +#define BD71815_INT_BUCK5_OCP_MASK BIT(4) +#define BD71815_INT_LED_OVP_MASK BIT(5) +#define BD71815_INT_LED_OCP_MASK BIT(6) +#define BD71815_INT_LED_SCP_MASK BIT(7) + +#define BD71815_INT_DCIN_RMV_MASK BIT(1) +#define BD71815_INT_CLPS_OUT_MASK BIT(2) +#define BD71815_INT_CLPS_IN_MASK BIT(3) +#define BD71815_INT_DCIN_OVP_RES_MASK BIT(4) +#define BD71815_INT_DCIN_OVP_DET_MASK BIT(5) + +#define BD71815_INT_DCIN_MON_RES_MASK BIT(0) +#define BD71815_INT_DCIN_MON_DET_MASK BIT(1) +#define BD71815_INT_WDOG_MASK BIT(6) + +#define BD71815_INT_VSYS_UV_RES_MASK BIT(0) +#define BD71815_INT_VSYS_UV_DET_MASK BIT(1) +#define BD71815_INT_VSYS_LOW_RES_MASK BIT(2) +#define BD71815_INT_VSYS_LOW_DET_MASK BIT(3) +#define BD71815_INT_VSYS_MON_RES_MASK BIT(6) +#define BD71815_INT_VSYS_MON_DET_MASK BIT(7) + +#define BD71815_INT_CHG_WDG_TEMP_MASK BIT(2) +#define BD71815_INT_CHG_WDG_TIME_MASK BIT(3) +#define BD71815_INT_CHG_RECHARGE_RES_MASK BIT(4) +#define BD71815_INT_CHG_RECHARGE_DET_MASK BIT(5) +#define BD71815_INT_CHG_RANGED_TEMP_TRANSITION_MASK BIT(6) +#define BD71815_INT_CHG_STATE_TRANSITION_MASK BIT(7) + +#define BD71815_INT_BAT_TEMP_NORMAL_MASK BIT(0) +#define BD71815_INT_BAT_TEMP_ERANGE_MASK BIT(1) +#define BD71815_INT_BAT_REMOVED_MASK BIT(4) +#define BD71815_INT_BAT_DETECTED_MASK BIT(5) +#define BD71815_INT_THERM_REMOVED_MASK BIT(6) +#define BD71815_INT_THERM_DETECTED_MASK BIT(7) + +#define BD71815_INT_BAT_DEAD_MASK BIT(1) +#define BD71815_INT_BAT_SHORTC_RES_MASK BIT(2) +#define BD71815_INT_BAT_SHORTC_DET_MASK BIT(3) +#define BD71815_INT_BAT_LOW_VOLT_RES_MASK BIT(4) +#define BD71815_INT_BAT_LOW_VOLT_DET_MASK BIT(5) +#define BD71815_INT_BAT_OVER_VOLT_RES_MASK BIT(6) +#define BD71815_INT_BAT_OVER_VOLT_DET_MASK BIT(7) + +#define BD71815_INT_BAT_MON_RES_MASK BIT(0) +#define BD71815_INT_BAT_MON_DET_MASK BIT(1) + +#define BD71815_INT_BAT_CC_MON1_MASK BIT(0) +#define BD71815_INT_BAT_CC_MON2_MASK BIT(1) +#define BD71815_INT_BAT_CC_MON3_MASK BIT(2) + +#define BD71815_INT_BAT_OVER_CURR_1_RES_MASK BIT(0) +#define BD71815_INT_BAT_OVER_CURR_1_DET_MASK BIT(1) +#define BD71815_INT_BAT_OVER_CURR_2_RES_MASK BIT(2) +#define BD71815_INT_BAT_OVER_CURR_2_DET_MASK BIT(3) +#define BD71815_INT_BAT_OVER_CURR_3_RES_MASK BIT(4) +#define BD71815_INT_BAT_OVER_CURR_3_DET_MASK BIT(5) + +#define BD71815_INT_TEMP_BAT_LOW_RES_MASK BIT(0) +#define BD71815_INT_TEMP_BAT_LOW_DET_MASK BIT(1) +#define BD71815_INT_TEMP_BAT_HI_RES_MASK BIT(2) +#define BD71815_INT_TEMP_BAT_HI_DET_MASK BIT(3) +#define BD71815_INT_TEMP_CHIP_OVER_125_RES_MASK BIT(4) +#define BD71815_INT_TEMP_CHIP_OVER_125_DET_MASK BIT(5) +#define BD71815_INT_TEMP_CHIP_OVER_VF_RES_MASK BIT(6) +#define BD71815_INT_TEMP_CHIP_OVER_VF_DET_MASK BIT(7) + +#define BD71815_INT_RTC0_MASK BIT(0) +#define BD71815_INT_RTC1_MASK BIT(1) +#define BD71815_INT_RTC2_MASK BIT(2) + +/* BD71815_REG_CC_CTRL bits */ +#define CCNTRST 0x80 +#define CCNTENB 0x40 +#define CCCALIB 0x20 + +/* BD71815_REG_CC_CURCD */ +#define CURDIR_Discharging 0x8000 + +/* BD71815_REG_VM_SA_IBAT */ +#define IBAT_SA_DIR_Discharging 0x8000 + +/* BD71815_REG_REX_CTRL_1 bits */ +#define REX_CLR BIT(4) + +/* BD71815_REG_REX_CTRL_1 bits */ +#define REX_PMU_STATE_MASK BIT(2) + +/* BD71815_REG_LED_CTRL bits */ +#define CHGDONE_LED_EN BIT(4) + +#endif /* __LINUX_MFD_BD71815_H */ diff --git a/include/linux/mfd/rohm-bd71828.h b/include/linux/mfd/rohm-bd71828.h index 017a4c01cb31..c7ab69c87ee8 100644 --- a/include/linux/mfd/rohm-bd71828.h +++ b/include/linux/mfd/rohm-bd71828.h @@ -151,6 +151,9 @@ enum { #define BD71828_REG_GPIO_CTRL3 0x49 #define BD71828_REG_IO_STAT 0xed +/* clk */ +#define BD71828_REG_OUT32K 0x4b + /* RTC */ #define BD71828_REG_RTC_SEC 0x4c #define BD71828_REG_RTC_MINUTE 0x4d diff --git a/include/linux/mfd/rohm-bd718x7.h b/include/linux/mfd/rohm-bd718x7.h index bee2474a8f9f..df2918198d37 100644 --- a/include/linux/mfd/rohm-bd718x7.h +++ b/include/linux/mfd/rohm-bd718x7.h @@ -310,17 +310,4 @@ enum { BD718XX_PWRBTN_LONG_PRESS_15S }; -struct bd718xx { - /* - * Please keep this as the first member here as some - * drivers (clk) supporting more than one chip may only know this - * generic struct 'struct rohm_regmap_dev' and assume it is - * the first chunk of parent device's private data. - */ - struct rohm_regmap_dev chip; - - int chip_irq; - struct regmap_irq_chip_data *irq_data; -}; - #endif /* __LINUX_MFD_BD718XX_H__ */ diff --git a/include/linux/mfd/rohm-bd957x.h b/include/linux/mfd/rohm-bd957x.h new file mode 100644 index 000000000000..acc920b64f75 --- /dev/null +++ b/include/linux/mfd/rohm-bd957x.h @@ -0,0 +1,140 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* Copyright (C) 2021 ROHM Semiconductors */ + +#ifndef __LINUX_MFD_BD957X_H__ +#define __LINUX_MFD_BD957X_H__ + +enum { + BD957X_VD50, + BD957X_VD18, + BD957X_VDDDR, + BD957X_VD10, + BD957X_VOUTL1, + BD957X_VOUTS1, +}; + +/* + * The BD9576 has own IRQ 'blocks' for: + * - I2C/thermal, + * - Over voltage protection + * - Short-circuit protection + * - Over current protection + * - Over voltage detection + * - Under voltage detection + * - Under voltage protection + * - 'system interrupt'. + * + * Each of the blocks have a status register giving more accurate IRQ source + * information - for example which of the regulators have over-voltage. + * + * On top of this, there is "main IRQ" status register where each bit indicates + * which of sub-blocks have active IRQs. Fine. That would fit regmap-irq main + * status handling. Except that: + * - Only some sub-IRQs can be masked. + * - The IRQ informs us about fault-condition, not when fault state changes. + * The IRQ line it is kept asserted until the detected condition is acked + * AND cleared in HW. This is annoying for IRQs like the one informing high + * temperature because if IRQ is not disabled it keeps the CPU in IRQ + * handling loop. + * + * For now we do just use the main-IRQ register as source for our IRQ + * information and bind the regmap-irq to this. We leave fine-grained sub-IRQ + * register handling to handlers in sub-devices. The regulator driver shall + * read which regulators are source for problem - or if the detected error is + * regulator temperature error. The sub-drivers do also handle masking of "sub- + * IRQs" if this is supported/needed. + * + * To overcome the problem with HW keeping IRQ asserted we do call + * disable_irq_nosync() from sub-device handler and add a delayed work to + * re-enable IRQ roughly 1 second later. This should keep our CPU out of + * busy-loop. + */ +#define IRQS_SILENT_MS 1000 + +enum { + BD9576_INT_THERM, + BD9576_INT_OVP, + BD9576_INT_SCP, + BD9576_INT_OCP, + BD9576_INT_OVD, + BD9576_INT_UVD, + BD9576_INT_UVP, + BD9576_INT_SYS, +}; + +#define BD957X_REG_SMRB_ASSERT 0x15 +#define BD957X_REG_PMIC_INTERNAL_STAT 0x20 +#define BD957X_REG_INT_THERM_STAT 0x23 +#define BD957X_REG_INT_THERM_MASK 0x24 +#define BD957X_REG_INT_OVP_STAT 0x25 +#define BD957X_REG_INT_SCP_STAT 0x26 +#define BD957X_REG_INT_OCP_STAT 0x27 +#define BD957X_REG_INT_OVD_STAT 0x28 +#define BD957X_REG_INT_UVD_STAT 0x29 +#define BD957X_REG_INT_UVP_STAT 0x2a +#define BD957X_REG_INT_SYS_STAT 0x2b +#define BD957X_REG_INT_SYS_MASK 0x2c +#define BD957X_REG_INT_MAIN_STAT 0x30 +#define BD957X_REG_INT_MAIN_MASK 0x31 + +#define UVD_IRQ_VALID_MASK 0x6F +#define OVD_IRQ_VALID_MASK 0x2F + +#define BD957X_MASK_INT_MAIN_THERM BIT(0) +#define BD957X_MASK_INT_MAIN_OVP BIT(1) +#define BD957X_MASK_INT_MAIN_SCP BIT(2) +#define BD957X_MASK_INT_MAIN_OCP BIT(3) +#define BD957X_MASK_INT_MAIN_OVD BIT(4) +#define BD957X_MASK_INT_MAIN_UVD BIT(5) +#define BD957X_MASK_INT_MAIN_UVP BIT(6) +#define BD957X_MASK_INT_MAIN_SYS BIT(7) +#define BD957X_MASK_INT_ALL 0xff + +#define BD957X_REG_WDT_CONF 0x16 + +#define BD957X_REG_POW_TRIGGER1 0x41 +#define BD957X_REG_POW_TRIGGER2 0x42 +#define BD957X_REG_POW_TRIGGER3 0x43 +#define BD957X_REG_POW_TRIGGER4 0x44 +#define BD957X_REG_POW_TRIGGERL1 0x45 +#define BD957X_REG_POW_TRIGGERS1 0x46 + +#define BD957X_REGULATOR_EN_MASK 0xff +#define BD957X_REGULATOR_DIS_VAL 0xff + +#define BD957X_VSEL_REG_MASK 0xff + +#define BD957X_MASK_VOUT1_TUNE 0x87 +#define BD957X_MASK_VOUT2_TUNE 0x87 +#define BD957X_MASK_VOUT3_TUNE 0x1f +#define BD957X_MASK_VOUT4_TUNE 0x1f +#define BD957X_MASK_VOUTL1_TUNE 0x87 + +#define BD957X_REG_VOUT1_TUNE 0x50 +#define BD957X_REG_VOUT2_TUNE 0x53 +#define BD957X_REG_VOUT3_TUNE 0x56 +#define BD957X_REG_VOUT4_TUNE 0x59 +#define BD957X_REG_VOUTL1_TUNE 0x5c + +#define BD9576_REG_VOUT1_OVD 0x51 +#define BD9576_REG_VOUT1_UVD 0x52 +#define BD9576_REG_VOUT2_OVD 0x54 +#define BD9576_REG_VOUT2_UVD 0x55 +#define BD9576_REG_VOUT3_OVD 0x57 +#define BD9576_REG_VOUT3_UVD 0x58 +#define BD9576_REG_VOUT4_OVD 0x5a +#define BD9576_REG_VOUT4_UVD 0x5b +#define BD9576_REG_VOUTL1_OVD 0x5d +#define BD9576_REG_VOUTL1_UVD 0x5e + +#define BD9576_MASK_XVD 0x7f + +#define BD9576_REG_VOUT1S_OCW 0x5f +#define BD9576_REG_VOUT1S_OCP 0x60 + +#define BD9576_MASK_VOUT1S_OCW 0x3f +#define BD9576_MASK_VOUT1S_OCP 0x3f + +#define BD957X_MAX_REGISTER 0x61 + +#endif diff --git a/include/linux/mfd/rohm-generic.h b/include/linux/mfd/rohm-generic.h index 66f673c35303..35b392a0d73a 100644 --- a/include/linux/mfd/rohm-generic.h +++ b/include/linux/mfd/rohm-generic.h @@ -8,12 +8,15 @@ #include <linux/regulator/driver.h> enum rohm_chip_type { - ROHM_CHIP_TYPE_BD71837 = 0, - ROHM_CHIP_TYPE_BD71847, - ROHM_CHIP_TYPE_BD70528, - ROHM_CHIP_TYPE_BD71828, ROHM_CHIP_TYPE_BD9571, + ROHM_CHIP_TYPE_BD9573, ROHM_CHIP_TYPE_BD9574, + ROHM_CHIP_TYPE_BD9576, + ROHM_CHIP_TYPE_BD70528, + ROHM_CHIP_TYPE_BD71815, + ROHM_CHIP_TYPE_BD71828, + ROHM_CHIP_TYPE_BD71837, + ROHM_CHIP_TYPE_BD71847, ROHM_CHIP_TYPE_AMOUNT }; @@ -26,7 +29,8 @@ struct rohm_regmap_dev { #define ROHM_DVS_LEVEL_IDLE BIT(1) #define ROHM_DVS_LEVEL_SUSPEND BIT(2) #define ROHM_DVS_LEVEL_LPSR BIT(3) -#define ROHM_DVS_LEVEL_VALID_AMOUNT 4 +#define ROHM_DVS_LEVEL_SNVS BIT(4) +#define ROHM_DVS_LEVEL_VALID_AMOUNT 5 #define ROHM_DVS_LEVEL_UNKNOWN 0 /** @@ -65,6 +69,9 @@ struct rohm_dvs_config { unsigned int lpsr_reg; unsigned int lpsr_mask; unsigned int lpsr_on_mask; + unsigned int snvs_reg; + unsigned int snvs_mask; + unsigned int snvs_on_mask; }; #if IS_ENABLED(CONFIG_REGULATOR_ROHM) diff --git a/include/linux/mfd/twl.h b/include/linux/mfd/twl.h index 089e8942223a..8871cc5188a0 100644 --- a/include/linux/mfd/twl.h +++ b/include/linux/mfd/twl.h @@ -781,8 +781,6 @@ int twl4030_sih_setup(struct device *dev, int module, int irq_base); #define TWL4030_VAUX3_DEV_GRP 0x1F #define TWL4030_VAUX3_DEDICATED 0x22 -static inline int twl4030charger_usb_en(int enable) { return 0; } - /*----------------------------------------------------------------------*/ /* Linux-specific regulator identifiers ... for now, we only support diff --git a/include/linux/platform_data/i2c-designware.h b/include/linux/platform_data/i2c-designware.h deleted file mode 100644 index 014c4a5a7e13..000000000000 --- a/include/linux/platform_data/i2c-designware.h +++ /dev/null @@ -1,13 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright(c) 2014 Intel Corporation. - */ - -#ifndef I2C_DESIGNWARE_H -#define I2C_DESIGNWARE_H - -struct dw_i2c_platform_data { - unsigned int i2c_scl_freq; -}; - -#endif diff --git a/drivers/extcon/extcon-arizona.c b/sound/soc/codecs/arizona-jack.c index aae82db542a5..56d2ce05de50 100644 --- a/drivers/extcon/extcon-arizona.c +++ b/sound/soc/codecs/arizona-jack.c @@ -290,7 +290,7 @@ static void arizona_start_mic(struct arizona_extcon_info *info) unsigned int mode; /* Microphone detection can't use idle mode */ - pm_runtime_get(info->dev); + pm_runtime_get_sync(info->dev); if (info->detecting) { ret = regulator_allow_bypass(info->micvdd, false); @@ -601,7 +601,7 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data) struct arizona *arizona = info->arizona; int id_gpio = arizona->pdata.hpdet_id_gpio; unsigned int report = EXTCON_JACK_HEADPHONE; - int ret, reading; + int ret, reading, state; bool mic = false; mutex_lock(&info->lock); @@ -614,12 +614,11 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data) } /* If the cable was removed while measuring ignore the result */ - ret = extcon_get_state(info->edev, EXTCON_MECHANICAL); - if (ret < 0) { - dev_err(arizona->dev, "Failed to check cable state: %d\n", - ret); + state = extcon_get_state(info->edev, EXTCON_MECHANICAL); + if (state < 0) { + dev_err(arizona->dev, "Failed to check cable state: %d\n", state); goto out; - } else if (!ret) { + } else if (!state) { dev_dbg(arizona->dev, "Ignoring HPDET for removed cable\n"); goto done; } @@ -667,7 +666,7 @@ done: gpio_set_value_cansleep(id_gpio, 0); /* If we have a mic then reenable MICDET */ - if (mic || info->mic) + if (state && (mic || info->mic)) arizona_start_mic(info); if (info->hpdet_active) { @@ -675,7 +674,9 @@ done: info->hpdet_active = false; } - info->hpdet_done = true; + /* Do not set hp_det done when the cable has been unplugged */ + if (state) + info->hpdet_done = true; out: mutex_unlock(&info->lock); @@ -694,7 +695,7 @@ static void arizona_identify_headphone(struct arizona_extcon_info *info) dev_dbg(arizona->dev, "Starting HPDET\n"); /* Make sure we keep the device enabled during the measurement */ - pm_runtime_get(info->dev); + pm_runtime_get_sync(info->dev); info->hpdet_active = true; @@ -1509,7 +1510,7 @@ static int arizona_extcon_probe(struct platform_device *pdev) */ info->micd_pol_gpio = gpiod_get_optional(arizona->dev, "wlf,micd-pol", - GPIOD_OUT_LOW); + mode); if (IS_ERR(info->micd_pol_gpio)) { ret = PTR_ERR(info->micd_pol_gpio); dev_err(arizona->dev, @@ -1759,25 +1760,6 @@ static int arizona_extcon_remove(struct platform_device *pdev) bool change; int ret; - ret = regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1, - ARIZONA_MICD_ENA, 0, - &change); - if (ret < 0) { - dev_err(&pdev->dev, "Failed to disable micd on remove: %d\n", - ret); - } else if (change) { - regulator_disable(info->micvdd); - pm_runtime_put(info->dev); - } - - gpiod_put(info->micd_pol_gpio); - - pm_runtime_disable(&pdev->dev); - - regmap_update_bits(arizona->regmap, - ARIZONA_MICD_CLAMP_CONTROL, - ARIZONA_MICD_CLAMP_MODE_MASK, 0); - if (info->micd_clamp) { jack_irq_rise = ARIZONA_IRQ_MICD_CLAMP_RISE; jack_irq_fall = ARIZONA_IRQ_MICD_CLAMP_FALL; @@ -1793,10 +1775,31 @@ static int arizona_extcon_remove(struct platform_device *pdev) arizona_free_irq(arizona, jack_irq_rise, info); arizona_free_irq(arizona, jack_irq_fall, info); cancel_delayed_work_sync(&info->hpdet_work); + cancel_delayed_work_sync(&info->micd_detect_work); + cancel_delayed_work_sync(&info->micd_timeout_work); + + ret = regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1, + ARIZONA_MICD_ENA, 0, + &change); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to disable micd on remove: %d\n", + ret); + } else if (change) { + regulator_disable(info->micvdd); + pm_runtime_put(info->dev); + } + + regmap_update_bits(arizona->regmap, + ARIZONA_MICD_CLAMP_CONTROL, + ARIZONA_MICD_CLAMP_MODE_MASK, 0); regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE, ARIZONA_JD1_ENA, 0); arizona_clk32k_disable(arizona); + gpiod_put(info->micd_pol_gpio); + + pm_runtime_disable(&pdev->dev); + return 0; } |