diff options
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 11 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c | 66 |
2 files changed, 75 insertions, 2 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index bad8f14b1941..d837f81b4d97 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -3724,8 +3724,15 @@ void ixgbe_set_rx_mode(struct net_device *netdev) hw->addr_ctrl.user_set_promisc = true; fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE); vmolr |= (IXGBE_VMOLR_ROPE | IXGBE_VMOLR_MPE); - /* don't hardware filter vlans in promisc mode */ - ixgbe_vlan_filter_disable(adapter); + /* Only disable hardware filter vlans in promiscuous mode + * if SR-IOV and VMDQ are disabled - otherwise ensure + * that hardware VLAN filters remain enabled. + */ + if (!(adapter->flags & (IXGBE_FLAG_VMDQ_ENABLED | + IXGBE_FLAG_SRIOV_ENABLED))) + ixgbe_vlan_filter_disable(adapter); + else + ixgbe_vlan_filter_enable(adapter); } else { if (netdev->flags & IFF_ALLMULTI) { fctrl |= IXGBE_FCTRL_MPE; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c index 1e7d587c4e57..6c624c9d4c0f 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c @@ -768,6 +768,29 @@ static int ixgbe_set_vf_mac_addr(struct ixgbe_adapter *adapter, return ixgbe_set_vf_mac(adapter, vf, new_mac) < 0; } +static int ixgbe_find_vlvf_entry(struct ixgbe_hw *hw, u32 vlan) +{ + u32 vlvf; + s32 regindex; + + /* short cut the special case */ + if (vlan == 0) + return 0; + + /* Search for the vlan id in the VLVF entries */ + for (regindex = 1; regindex < IXGBE_VLVF_ENTRIES; regindex++) { + vlvf = IXGBE_READ_REG(hw, IXGBE_VLVF(regindex)); + if ((vlvf & VLAN_VID_MASK) == vlan) + break; + } + + /* Return a negative value if not found */ + if (regindex >= IXGBE_VLVF_ENTRIES) + regindex = -1; + + return regindex; +} + static int ixgbe_set_vf_vlan_msg(struct ixgbe_adapter *adapter, u32 *msgbuf, u32 vf) { @@ -775,6 +798,9 @@ static int ixgbe_set_vf_vlan_msg(struct ixgbe_adapter *adapter, int add = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK) >> IXGBE_VT_MSGINFO_SHIFT; int vid = (msgbuf[1] & IXGBE_VLVF_VLANID_MASK); int err; + s32 reg_ndx; + u32 vlvf; + u32 bits; u8 tcs = netdev_get_num_tc(adapter->netdev); if (adapter->vfinfo[vf].pf_vlan || tcs) { @@ -790,10 +816,50 @@ static int ixgbe_set_vf_vlan_msg(struct ixgbe_adapter *adapter, else if (adapter->vfinfo[vf].vlan_count) adapter->vfinfo[vf].vlan_count--; + /* in case of promiscuous mode any VLAN filter set for a VF must + * also have the PF pool added to it. + */ + if (add && adapter->netdev->flags & IFF_PROMISC) + err = ixgbe_set_vf_vlan(adapter, add, vid, VMDQ_P(0)); + err = ixgbe_set_vf_vlan(adapter, add, vid, vf); if (!err && adapter->vfinfo[vf].spoofchk_enabled) hw->mac.ops.set_vlan_anti_spoofing(hw, true, vf); + /* Go through all the checks to see if the VLAN filter should + * be wiped completely. + */ + if (!add && adapter->netdev->flags & IFF_PROMISC) { + reg_ndx = ixgbe_find_vlvf_entry(hw, vid); + if (reg_ndx < 0) + goto out; + vlvf = IXGBE_READ_REG(hw, IXGBE_VLVF(reg_ndx)); + /* See if any other pools are set for this VLAN filter + * entry other than the PF. + */ + if (VMDQ_P(0) < 32) { + bits = IXGBE_READ_REG(hw, IXGBE_VLVFB(reg_ndx * 2)); + bits &= ~(1 << VMDQ_P(0)); + bits |= IXGBE_READ_REG(hw, + IXGBE_VLVFB(reg_ndx * 2) + 1); + } else { + bits = IXGBE_READ_REG(hw, + IXGBE_VLVFB(reg_ndx * 2) + 1); + bits &= ~(1 << (VMDQ_P(0) - 32)); + bits |= IXGBE_READ_REG(hw, IXGBE_VLVFB(reg_ndx * 2)); + } + + /* If the filter was removed then ensure PF pool bit + * is cleared if the PF only added itself to the pool + * because the PF is in promiscuous mode. + */ + if ((vlvf & VLAN_VID_MASK) == vid && + !test_bit(vid, adapter->active_vlans) && !bits) + ixgbe_set_vf_vlan(adapter, add, vid, VMDQ_P(0)); + } + +out: + return err; } |