diff options
| -rw-r--r-- | Documentation/devicetree/bindings/i2c/i2c-at91.txt | 6 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-at91-core.c | 2 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-bcm2835.c | 17 | ||||
| -rw-r--r-- | drivers/i2c/i2c-core-base.c | 13 |
4 files changed, 23 insertions, 15 deletions
diff --git a/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt index 2210f4359c45..8347b1e7c080 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-at91.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-at91.txt @@ -18,8 +18,10 @@ Optional properties: - dma-names: should contain "tx" and "rx". - atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO capable I2C controllers. -- i2c-sda-hold-time-ns: TWD hold time, only available for "atmel,sama5d4-i2c" - and "atmel,sama5d2-i2c". +- i2c-sda-hold-time-ns: TWD hold time, only available for: + "atmel,sama5d4-i2c", + "atmel,sama5d2-i2c", + "microchip,sam9x60-i2c". - Child nodes conforming to i2c bus binding Examples : diff --git a/drivers/i2c/busses/i2c-at91-core.c b/drivers/i2c/busses/i2c-at91-core.c index e13af4874976..5137e6297022 100644 --- a/drivers/i2c/busses/i2c-at91-core.c +++ b/drivers/i2c/busses/i2c-at91-core.c @@ -174,7 +174,7 @@ static struct at91_twi_pdata sama5d2_config = { static struct at91_twi_pdata sam9x60_config = { .clk_max_div = 7, - .clk_offset = 4, + .clk_offset = 3, .has_unre_flag = true, .has_alt_cmd = true, .has_hold_field = true, diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c index e01b2b57e724..5ab901ad615d 100644 --- a/drivers/i2c/busses/i2c-bcm2835.c +++ b/drivers/i2c/busses/i2c-bcm2835.c @@ -58,6 +58,7 @@ struct bcm2835_i2c_dev { struct i2c_adapter adapter; struct completion completion; struct i2c_msg *curr_msg; + struct clk *bus_clk; int num_msgs; u32 msg_err; u8 *msg_buf; @@ -404,7 +405,6 @@ static int bcm2835_i2c_probe(struct platform_device *pdev) struct resource *mem, *irq; int ret; struct i2c_adapter *adap; - struct clk *bus_clk; struct clk *mclk; u32 bus_clk_rate; @@ -427,11 +427,11 @@ static int bcm2835_i2c_probe(struct platform_device *pdev) return PTR_ERR(mclk); } - bus_clk = bcm2835_i2c_register_div(&pdev->dev, mclk, i2c_dev); + i2c_dev->bus_clk = bcm2835_i2c_register_div(&pdev->dev, mclk, i2c_dev); - if (IS_ERR(bus_clk)) { + if (IS_ERR(i2c_dev->bus_clk)) { dev_err(&pdev->dev, "Could not register clock\n"); - return PTR_ERR(bus_clk); + return PTR_ERR(i2c_dev->bus_clk); } ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency", @@ -442,13 +442,13 @@ static int bcm2835_i2c_probe(struct platform_device *pdev) bus_clk_rate = 100000; } - ret = clk_set_rate_exclusive(bus_clk, bus_clk_rate); + ret = clk_set_rate_exclusive(i2c_dev->bus_clk, bus_clk_rate); if (ret < 0) { dev_err(&pdev->dev, "Could not set clock frequency\n"); return ret; } - ret = clk_prepare_enable(bus_clk); + ret = clk_prepare_enable(i2c_dev->bus_clk); if (ret) { dev_err(&pdev->dev, "Couldn't prepare clock"); return ret; @@ -491,10 +491,9 @@ static int bcm2835_i2c_probe(struct platform_device *pdev) static int bcm2835_i2c_remove(struct platform_device *pdev) { struct bcm2835_i2c_dev *i2c_dev = platform_get_drvdata(pdev); - struct clk *bus_clk = devm_clk_get(i2c_dev->dev, "div"); - clk_rate_exclusive_put(bus_clk); - clk_disable_unprepare(bus_clk); + clk_rate_exclusive_put(i2c_dev->bus_clk); + clk_disable_unprepare(i2c_dev->bus_clk); free_irq(i2c_dev->irq, i2c_dev); i2c_del_adapter(&i2c_dev->adapter); diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c index 9f8dcd3f8385..35b209797d7b 100644 --- a/drivers/i2c/i2c-core-base.c +++ b/drivers/i2c/i2c-core-base.c @@ -186,10 +186,11 @@ int i2c_generic_scl_recovery(struct i2c_adapter *adap) * If we can set SDA, we will always create a STOP to ensure additional * pulses will do no harm. This is achieved by letting SDA follow SCL * half a cycle later. Check the 'incomplete_write_byte' fault injector - * for details. + * for details. Note that we must honour tsu:sto, 4us, but lets use 5us + * here for simplicity. */ bri->set_scl(adap, scl); - ndelay(RECOVERY_NDELAY / 2); + ndelay(RECOVERY_NDELAY); if (bri->set_sda) bri->set_sda(adap, scl); ndelay(RECOVERY_NDELAY / 2); @@ -211,7 +212,13 @@ int i2c_generic_scl_recovery(struct i2c_adapter *adap) scl = !scl; bri->set_scl(adap, scl); /* Creating STOP again, see above */ - ndelay(RECOVERY_NDELAY / 2); + if (scl) { + /* Honour minimum tsu:sto */ + ndelay(RECOVERY_NDELAY); + } else { + /* Honour minimum tf and thd:dat */ + ndelay(RECOVERY_NDELAY / 2); + } if (bri->set_sda) bri->set_sda(adap, scl); ndelay(RECOVERY_NDELAY / 2); |