diff options
104 files changed, 1977 insertions, 1619 deletions
diff --git a/Documentation/acpi/aml-debugger.txt b/Documentation/acpi/aml-debugger.txt deleted file mode 100644 index 75ebeb64ab29..000000000000 --- a/Documentation/acpi/aml-debugger.txt +++ /dev/null @@ -1,66 +0,0 @@ -The AML Debugger - -Copyright (C) 2016, Intel Corporation -Author: Lv Zheng <lv.zheng@intel.com> - - -This document describes the usage of the AML debugger embedded in the Linux -kernel. - -1. Build the debugger - - The following kernel configuration items are required to enable the AML - debugger interface from the Linux kernel: - - CONFIG_ACPI_DEBUGGER=y - CONFIG_ACPI_DEBUGGER_USER=m - - The userspace utilities can be built from the kernel source tree using - the following commands: - - $ cd tools - $ make acpi - - The resultant userspace tool binary is then located at: - - tools/power/acpi/acpidbg - - It can be installed to system directories by running "make install" (as a - sufficiently privileged user). - -2. Start the userspace debugger interface - - After booting the kernel with the debugger built-in, the debugger can be - started by using the following commands: - - # mount -t debugfs none /sys/kernel/debug - # modprobe acpi_dbg - # tools/power/acpi/acpidbg - - That spawns the interactive AML debugger environment where you can execute - debugger commands. - - The commands are documented in the "ACPICA Overview and Programmer Reference" - that can be downloaded from - - https://acpica.org/documentation - - The detailed debugger commands reference is located in Chapter 12 "ACPICA - Debugger Reference". The "help" command can be used for a quick reference. - -3. Stop the userspace debugger interface - - The interactive debugger interface can be closed by pressing Ctrl+C or using - the "quit" or "exit" commands. When finished, unload the module with: - - # rmmod acpi_dbg - - The module unloading may fail if there is an acpidbg instance running. - -4. Run the debugger in a script - - It may be useful to run the AML debugger in a test script. "acpidbg" supports - this in a special "batch" mode. For example, the following command outputs - the entire ACPI namespace: - - # acpidbg -b "namespace" diff --git a/Documentation/acpi/apei/output_format.txt b/Documentation/acpi/apei/output_format.txt deleted file mode 100644 index 0c49c197c47a..000000000000 --- a/Documentation/acpi/apei/output_format.txt +++ /dev/null @@ -1,147 +0,0 @@ - APEI output format - ~~~~~~~~~~~~~~~~~~ - -APEI uses printk as hardware error reporting interface, the output -format is as follow. - -<error record> := -APEI generic hardware error status -severity: <integer>, <severity string> -section: <integer>, severity: <integer>, <severity string> -flags: <integer> -<section flags strings> -fru_id: <uuid string> -fru_text: <string> -section_type: <section type string> -<section data> - -<severity string>* := recoverable | fatal | corrected | info - -<section flags strings># := -[primary][, containment warning][, reset][, threshold exceeded]\ -[, resource not accessible][, latent error] - -<section type string> := generic processor error | memory error | \ -PCIe error | unknown, <uuid string> - -<section data> := -<generic processor section data> | <memory section data> | \ -<pcie section data> | <null> - -<generic processor section data> := -[processor_type: <integer>, <proc type string>] -[processor_isa: <integer>, <proc isa string>] -[error_type: <integer> -<proc error type strings>] -[operation: <integer>, <proc operation string>] -[flags: <integer> -<proc flags strings>] -[level: <integer>] -[version_info: <integer>] -[processor_id: <integer>] -[target_address: <integer>] -[requestor_id: <integer>] -[responder_id: <integer>] -[IP: <integer>] - -<proc type string>* := IA32/X64 | IA64 - -<proc isa string>* := IA32 | IA64 | X64 - -<processor error type strings># := -[cache error][, TLB error][, bus error][, micro-architectural error] - -<proc operation string>* := unknown or generic | data read | data write | \ -instruction execution - -<proc flags strings># := -[restartable][, precise IP][, overflow][, corrected] - -<memory section data> := -[error_status: <integer>] -[physical_address: <integer>] -[physical_address_mask: <integer>] -[node: <integer>] -[card: <integer>] -[module: <integer>] -[bank: <integer>] -[device: <integer>] -[row: <integer>] -[column: <integer>] -[bit_position: <integer>] -[requestor_id: <integer>] -[responder_id: <integer>] -[target_id: <integer>] -[error_type: <integer>, <mem error type string>] - -<mem error type string>* := -unknown | no error | single-bit ECC | multi-bit ECC | \ -single-symbol chipkill ECC | multi-symbol chipkill ECC | master abort | \ -target abort | parity error | watchdog timeout | invalid address | \ -mirror Broken | memory sparing | scrub corrected error | \ -scrub uncorrected error - -<pcie section data> := -[port_type: <integer>, <pcie port type string>] -[version: <integer>.<integer>] -[command: <integer>, status: <integer>] -[device_id: <integer>:<integer>:<integer>.<integer> -slot: <integer> -secondary_bus: <integer> -vendor_id: <integer>, device_id: <integer> -class_code: <integer>] -[serial number: <integer>, <integer>] -[bridge: secondary_status: <integer>, control: <integer>] -[aer_status: <integer>, aer_mask: <integer> -<aer status string> -[aer_uncor_severity: <integer>] -aer_layer=<aer layer string>, aer_agent=<aer agent string> -aer_tlp_header: <integer> <integer> <integer> <integer>] - -<pcie port type string>* := PCIe end point | legacy PCI end point | \ -unknown | unknown | root port | upstream switch port | \ -downstream switch port | PCIe to PCI/PCI-X bridge | \ -PCI/PCI-X to PCIe bridge | root complex integrated endpoint device | \ -root complex event collector - -if section severity is fatal or recoverable -<aer status string># := -unknown | unknown | unknown | unknown | Data Link Protocol | \ -unknown | unknown | unknown | unknown | unknown | unknown | unknown | \ -Poisoned TLP | Flow Control Protocol | Completion Timeout | \ -Completer Abort | Unexpected Completion | Receiver Overflow | \ -Malformed TLP | ECRC | Unsupported Request -else -<aer status string># := -Receiver Error | unknown | unknown | unknown | unknown | unknown | \ -Bad TLP | Bad DLLP | RELAY_NUM Rollover | unknown | unknown | unknown | \ -Replay Timer Timeout | Advisory Non-Fatal -fi - -<aer layer string> := -Physical Layer | Data Link Layer | Transaction Layer - -<aer agent string> := -Receiver ID | Requester ID | Completer ID | Transmitter ID - -Where, [] designate corresponding content is optional - -All <field string> description with * has the following format: - -field: <integer>, <field string> - -Where value of <integer> should be the position of "string" in <field -string> description. Otherwise, <field string> will be "unknown". - -All <field strings> description with # has the following format: - -field: <integer> -<field strings> - -Where each string in <fields strings> corresponding to one set bit of -<integer>. The bit position is the position of "string" in <field -strings> description. - -For more detailed explanation of every field, please refer to UEFI -specification version 2.3 or later, section Appendix N: Common -Platform Error Record. diff --git a/Documentation/acpi/i2c-muxes.txt b/Documentation/acpi/i2c-muxes.txt deleted file mode 100644 index 9fcc4f0b885e..000000000000 --- a/Documentation/acpi/i2c-muxes.txt +++ /dev/null @@ -1,58 +0,0 @@ -ACPI I2C Muxes --------------- - -Describing an I2C device hierarchy that includes I2C muxes requires an ACPI -Device () scope per mux channel. - -Consider this topology: - -+------+ +------+ -| SMB1 |-->| MUX0 |--CH00--> i2c client A (0x50) -| | | 0x70 |--CH01--> i2c client B (0x50) -+------+ +------+ - -which corresponds to the following ASL: - -Device (SMB1) -{ - Name (_HID, ...) - Device (MUX0) - { - Name (_HID, ...) - Name (_CRS, ResourceTemplate () { - I2cSerialBus (0x70, ControllerInitiated, I2C_SPEED, - AddressingMode7Bit, "^SMB1", 0x00, - ResourceConsumer,,) - } - - Device (CH00) - { - Name (_ADR, 0) - - Device (CLIA) - { - Name (_HID, ...) - Name (_CRS, ResourceTemplate () { - I2cSerialBus (0x50, ControllerInitiated, I2C_SPEED, - AddressingMode7Bit, "^CH00", 0x00, - ResourceConsumer,,) - } - } - } - - Device (CH01) - { - Name (_ADR, 1) - - Device (CLIB) - { - Name (_HID, ...) - Name (_CRS, ResourceTemplate () { - I2cSerialBus (0x50, ControllerInitiated, I2C_SPEED, - AddressingMode7Bit, "^CH01", 0x00, - ResourceConsumer,,) - } - } - } - } -} diff --git a/Documentation/acpi/initrd_table_override.txt b/Documentation/acpi/initrd_table_override.txt deleted file mode 100644 index 30437a6db373..000000000000 --- a/Documentation/acpi/initrd_table_override.txt +++ /dev/null @@ -1,111 +0,0 @@ -Upgrading ACPI tables via initrd -================================ - -1) Introduction (What is this about) -2) What is this for -3) How does it work -4) References (Where to retrieve userspace tools) - -1) What is this about ---------------------- - -If the ACPI_TABLE_UPGRADE compile option is true, it is possible to -upgrade the ACPI execution environment that is defined by the ACPI tables -via upgrading the ACPI tables provided by the BIOS with an instrumented, -modified, more recent version one, or installing brand new ACPI tables. - -When building initrd with kernel in a single image, option -ACPI_TABLE_OVERRIDE_VIA_BUILTIN_INITRD should also be true for this -feature to work. - -For a full list of ACPI tables that can be upgraded/installed, take a look -at the char *table_sigs[MAX_ACPI_SIGNATURE]; definition in -drivers/acpi/tables.c. -All ACPI tables iasl (Intel's ACPI compiler and disassembler) knows should -be overridable, except: - - ACPI_SIG_RSDP (has a signature of 6 bytes) - - ACPI_SIG_FACS (does not have an ordinary ACPI table header) -Both could get implemented as well. - - -2) What is this for -------------------- - -Complain to your platform/BIOS vendor if you find a bug which is so severe -that a workaround is not accepted in the Linux kernel. And this facility -allows you to upgrade the buggy tables before your platform/BIOS vendor -releases an upgraded BIOS binary. - -This facility can be used by platform/BIOS vendors to provide a Linux -compatible environment without modifying the underlying platform firmware. - -This facility also provides a powerful feature to easily debug and test -ACPI BIOS table compatibility with the Linux kernel by modifying old -platform provided ACPI tables or inserting new ACPI tables. - -It can and should be enabled in any kernel because there is no functional -change with not instrumented initrds. - - -3) How does it work -------------------- - -# Extract the machine's ACPI tables: -cd /tmp -acpidump >acpidump -acpixtract -a acpidump -# Disassemble, modify and recompile them: -iasl -d *.dat -# For example add this statement into a _PRT (PCI Routing Table) function -# of the DSDT: -Store("HELLO WORLD", debug) -# And increase the OEM Revision. For example, before modification: -DefinitionBlock ("DSDT.aml", "DSDT", 2, "INTEL ", "TEMPLATE", 0x00000000) -# After modification: -DefinitionBlock ("DSDT.aml", "DSDT", 2, "INTEL ", "TEMPLATE", 0x00000001) -iasl -sa dsdt.dsl -# Add the raw ACPI tables to an uncompressed cpio archive. -# They must be put into a /kernel/firmware/acpi directory inside the cpio -# archive. Note that if the table put here matches a platform table -# (similar Table Signature, and similar OEMID, and similar OEM Table ID) -# with a more recent OEM Revision, the platform table will be upgraded by -# this table. If the table put here doesn't match a platform table -# (dissimilar Table Signature, or dissimilar OEMID, or dissimilar OEM Table -# ID), this table will be appended. -mkdir -p kernel/firmware/acpi -cp dsdt.aml kernel/firmware/acpi -# A maximum of "NR_ACPI_INITRD_TABLES (64)" tables are currently allowed -# (see osl.c): -iasl -sa facp.dsl -iasl -sa ssdt1.dsl -cp facp.aml kernel/firmware/acpi -cp ssdt1.aml kernel/firmware/acpi -# The uncompressed cpio archive must be the first. Other, typically -# compressed cpio archives, must be concatenated on top of the uncompressed -# one. Following command creates the uncompressed cpio archive and -# concatenates the original initrd on top: -find kernel | cpio -H newc --create > /boot/instrumented_initrd -cat /boot/initrd >>/boot/instrumented_initrd -# reboot with increased acpi debug level, e.g. boot params: -acpi.debug_level=0x2 acpi.debug_layer=0xFFFFFFFF -# and check your syslog: -[ 1.268089] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] -[ 1.272091] [ACPI Debug] String [0x0B] "HELLO WORLD" - -iasl is able to disassemble and recompile quite a lot different, -also static ACPI tables. - - -4) Where to retrieve userspace tools ------------------------------------- - -iasl and acpixtract are part of Intel's ACPICA project: -http://acpica.org/ -and should be packaged by distributions (for example in the acpica package -on SUSE). - -acpidump can be found in Len Browns pmtools: -ftp://kernel.org/pub/linux/kernel/people/lenb/acpi/utils/pmtools/acpidump -This tool is also part of the acpica package on SUSE. -Alternatively, used ACPI tables can be retrieved via sysfs in latest kernels: -/sys/firmware/acpi/tables diff --git a/Documentation/acpi/method-customizing.txt b/Documentation/acpi/method-customizing.txt deleted file mode 100644 index 7235da975f23..000000000000 --- a/Documentation/acpi/method-customizing.txt +++ /dev/null @@ -1,73 +0,0 @@ -Linux ACPI Custom Control Method How To -======================================= - -Written by Zhang Rui <rui.zhang@intel.com> - - -Linux supports customizing ACPI control methods at runtime. - -Users can use this to -1. override an existing method which may not work correctly, - or just for debugging purposes. -2. insert a completely new method in order to create a missing - method such as _OFF, _ON, _STA, _INI, etc. -For these cases, it is far simpler to dynamically install a single -control method rather than override the entire DSDT, because kernel -rebuild/reboot is not needed and test result can be got in minutes. - -Note: Only ACPI METHOD can be overridden, any other object types like - "Device", "OperationRegion", are not recognized. Methods - declared inside scope operators are also not supported. -Note: The same ACPI control method can be overridden for many times, - and it's always the latest one that used by Linux/kernel. -Note: To get the ACPI debug object output (Store (AAAA, Debug)), - please run "echo 1 > /sys/module/acpi/parameters/aml_debug_output". - -1. override an existing method - a) get the ACPI table via ACPI sysfs I/F. e.g. to get the DSDT, - just run "cat /sys/firmware/acpi/tables/DSDT > /tmp/dsdt.dat" - b) disassemble the table by running "iasl -d dsdt.dat". - c) rewrite the ASL code of the method and save it in a new file, - d) package the new file (psr.asl) to an ACPI table format. - Here is an example of a customized \_SB._AC._PSR method, - - DefinitionBlock ("", "SSDT", 1, "", "", 0x20080715) - { - Method (\_SB_.AC._PSR, 0, NotSerialized) - { - Store ("In AC _PSR", Debug) - Return (ACON) - } - } - Note that the full pathname of the method in ACPI namespace - should be used. - e) assemble the file to generate the AML code of the method. - e.g. "iasl -vw 6084 psr.asl" (psr.aml is generated as a result) - If parameter "-vw 6084" is not supported by your iASL compiler, - please try a newer version. - f) mount debugfs by "mount -t debugfs none /sys/kernel/debug" - g) override the old method via the debugfs by running - "cat /tmp/psr.aml > /sys/kernel/debug/acpi/custom_method" - -2. insert a new method - This is easier than overriding an existing method. - We just need to create the ASL code of the method we want to - insert and then follow the step c) ~ g) in section 1. - -3. undo your changes - The "undo" operation is not supported for a new inserted method - right now, i.e. we can not remove a method currently. - For an overridden method, in order to undo your changes, please - save a copy of the method original ASL code in step c) section 1, - and redo step c) ~ g) to override the method with the original one. - - -Note: We can use a kernel with multiple custom ACPI method running, - But each individual write to debugfs can implement a SINGLE - method override. i.e. if we want to insert/override multiple - ACPI methods, we need to redo step c) ~ g) for multiple times. - -Note: Be aware that root can mis-use this driver to modify arbitrary - memory and gain additional rights, if root's privileges got - restricted (for example if root is not allowed to load additional - modules after boot). diff --git a/Documentation/acpi/method-tracing.txt b/Documentation/acpi/method-tracing.txt deleted file mode 100644 index 0aba14c8f459..000000000000 --- a/Documentation/acpi/method-tracing.txt +++ /dev/null @@ -1,192 +0,0 @@ -ACPICA Trace Facility - -Copyright (C) 2015, Intel Corporation -Author: Lv Zheng <lv.zheng@intel.com> - - -Abstract: - -This document describes the functions and the interfaces of the method -tracing facility. - -1. Functionalities and usage examples: - - ACPICA provides method tracing capability. And two functions are - currently implemented using this capability. - - A. Log reducer - ACPICA subsystem provides debugging outputs when CONFIG_ACPI_DEBUG is - enabled. The debugging messages which are deployed via - ACPI_DEBUG_PRINT() macro can be reduced at 2 levels - per-component - level (known as debug layer, configured via - /sys/module/acpi/parameters/debug_layer) and per-type level (known as - debug level, configured via /sys/module/acpi/parameters/debug_level). - - But when the particular layer/level is applied to the control method - evaluations, the quantity of the debugging outputs may still be too - large to be put into the kernel log buffer. The idea thus is worked out - to only enable the particular debug layer/level (normally more detailed) - logs when the control method evaluation is started, and disable the - detailed logging when the control method evaluation is stopped. - - The following command examples illustrate the usage of the "log reducer" - functionality: - a. Filter out the debug layer/level matched logs when control methods - are being evaluated: - # cd /sys/module/acpi/parameters - # echo "0xXXXXXXXX" > trace_debug_layer - # echo "0xYYYYYYYY" > trace_debug_level - # echo "enable" > trace_state - b. Filter out the debug layer/level matched logs when the specified - control method is being evaluated: - # cd /sys/module/acpi/parameters - # echo "0xXXXXXXXX" > trace_debug_layer - # echo "0xYYYYYYYY" > trace_debug_level - # echo "\PPPP.AAAA.TTTT.HHHH" > trace_method_name - # echo "method" > /sys/module/acpi/parameters/trace_state - c. Filter out the debug layer/level matched logs when the specified - control method is being evaluated for the first time: - # cd /sys/module/acpi/parameters - # echo "0xXXXXXXXX" > trace_debug_layer - # echo "0xYYYYYYYY" > trace_debug_level - # echo "\PPPP.AAAA.TTTT.HHHH" > trace_method_name - # echo "method-once" > /sys/module/acpi/parameters/trace_state - Where: - 0xXXXXXXXX/0xYYYYYYYY: Refer to Documentation/acpi/debug.txt for - possible debug layer/level masking values. - \PPPP.AAAA.TTTT.HHHH: Full path of a control method that can be found - in the ACPI namespace. It needn't be an entry - of a control method evaluation. - - B. AML tracer - - There are special log entries added by the method tracing facility at - the "trace points" the AML interpreter starts/stops to execute a control - method, or an AML opcode. Note that the format of the log entries are - subject to change: - [ 0.186427] exdebug-0398 ex_trace_point : Method Begin [0xf58394d8:\_SB.PCI0.LPCB.ECOK] execution. - [ 0.186630] exdebug-0398 ex_trace_point : Opcode Begin [0xf5905c88:If] execution. - [ 0.186820] exdebug-0398 ex_trace_point : Opcode Begin [0xf5905cc0:LEqual] execution. - [ 0.187010] exdebug-0398 ex_trace_point : Opcode Begin [0xf5905a20:-NamePath-] execution. - [ 0.187214] exdebug-0398 ex_trace_point : Opcode End [0xf5905a20:-NamePath-] execution. - [ 0.187407] exdebug-0398 ex_trace_point : Opcode Begin [0xf5905f60:One] execution. - [ 0.187594] exdebug-0398 ex_trace_point : Opcode End [0xf5905f60:One] execution. - [ 0.187789] exdebug-0398 ex_trace_point : Opcode End [0xf5905cc0:LEqual] execution. - [ 0.187980] exdebug-0398 ex_trace_point : Opcode Begin [0xf5905cc0:Return] execution. - [ 0.188146] exdebug-0398 ex_trace_point : Opcode Begin [0xf5905f60:One] execution. - [ 0.188334] exdebug-0398 ex_trace_point : Opcode End [0xf5905f60:One] execution. - [ 0.188524] exdebug-0398 ex_trace_point : Opcode End [0xf5905cc0:Return] execution. - [ 0.188712] exdebug-0398 ex_trace_point : Opcode End [0xf5905c88:If] execution. - [ 0.188903] exdebug-0398 ex_trace_point : Method End [0xf58394d8:\_SB.PCI0.LPCB.ECOK] execution. - - Developers can utilize these special log entries to track the AML - interpretion, thus can aid issue debugging and performance tuning. Note - that, as the "AML tracer" logs are implemented via ACPI_DEBUG_PRINT() - macro, CONFIG_ACPI_DEBUG is also required to be enabled for enabling - "AML tracer" logs. - - The following command examples illustrate the usage of the "AML tracer" - functionality: - a. Filter out the method start/stop "AML tracer" logs when control - methods are being evaluated: - # cd /sys/module/acpi/parameters - # echo "0x80" > trace_debug_layer - # echo "0x10" > trace_debug_level - # echo "enable" > trace_state - b. Filter out the method start/stop "AML tracer" when the specified - control method is being evaluated: - # cd /sys/module/acpi/parameters - # echo "0x80" > trace_debug_layer - # echo "0x10" > trace_debug_level - # echo "\PPPP.AAAA.TTTT.HHHH" > trace_method_name - # echo "method" > trace_state - c. Filter out the method start/stop "AML tracer" logs when the specified - control method is being evaluated for the first time: - # cd /sys/module/acpi/parameters - # echo "0x80" > trace_debug_layer - # echo "0x10" > trace_debug_level - # echo "\PPPP.AAAA.TTTT.HHHH" > trace_method_name - # echo "method-once" > trace_state - d. Filter out the method/opcode start/stop "AML tracer" when the - specified control method is being evaluated: - # cd /sys/module/acpi/parameters - # echo "0x80" > trace_debug_layer - # echo "0x10" > trace_debug_level - # echo "\PPPP.AAAA.TTTT.HHHH" > trace_method_name - # echo "opcode" > trace_state - e. Filter out the method/opcode start/stop "AML tracer" when the - specified control method is being evaluated for the first time: - # cd /sys/module/acpi/parameters - # echo "0x80" > trace_debug_layer - # echo "0x10" > trace_debug_level - # echo "\PPPP.AAAA.TTTT.HHHH" > trace_method_name - # echo "opcode-opcode" > trace_state - - Note that all above method tracing facility related module parameters can - be used as the boot parameters, for example: - acpi.trace_debug_layer=0x80 acpi.trace_debug_level=0x10 \ - acpi.trace_method_name=\_SB.LID0._LID acpi.trace_state=opcode-once - -2. Interface descriptions: - - All method tracing functions can be configured via ACPI module - parameters that are accessible at /sys/module/acpi/parameters/: - - trace_method_name - The full path of the AML method that the user wants to trace. - Note that the full path shouldn't contain the trailing "_"s in its - name segments but may contain "\" to form an absolute path. - - trace_debug_layer - The temporary debug_layer used when the tracing feature is enabled. - Using ACPI_EXECUTER (0x80) by default, which is the debug_layer - used to match all "AML tracer" logs. - - trace_debug_level - The temporary debug_level used when the tracing feature is enabled. - Using ACPI_LV_TRACE_POINT (0x10) by default, which is the - debug_level used to match all "AML tracer" logs. - - trace_state - The status of the tracing feature. - Users can enable/disable this debug tracing feature by executing - the following command: - # echo string > /sys/module/acpi/parameters/trace_state - Where "string" should be one of the following: - "disable" - Disable the method tracing feature. - "enable" - Enable the method tracing feature. - ACPICA debugging messages matching - "trace_debug_layer/trace_debug_level" during any method - execution will be logged. - "method" - Enable the method tracing feature. - ACPICA debugging messages matching - "trace_debug_layer/trace_debug_level" during method execution - of "trace_method_name" will be logged. - "method-once" - Enable the method tracing feature. - ACPICA debugging messages matching - "trace_debug_layer/trace_debug_level" during method execution - of "trace_method_name" will be logged only once. - "opcode" - Enable the method tracing feature. - ACPICA debugging messages matching - "trace_debug_layer/trace_debug_level" during method/opcode - execution of "trace_method_name" will be logged. - "opcode-once" - Enable the method tracing feature. - ACPICA debugging messages matching - "trace_debug_layer/trace_debug_level" during method/opcode - execution of "trace_method_name" will be logged only once. - Note that, the difference between the "enable" and other feature - enabling options are: - 1. When "enable" is specified, since - "trace_debug_layer/trace_debug_level" shall apply to all control - method evaluations, after configuring "trace_state" to "enable", - "trace_method_name" will be reset to NULL. - 2. When "method/opcode" is specified, if - "trace_method_name" is NULL when "trace_state" is configured to - these options, the "trace_debug_layer/trace_debug_level" will - apply to all control method evaluations. diff --git a/Documentation/acpi/ssdt-overlays.txt b/Documentation/acpi/ssdt-overlays.txt deleted file mode 100644 index 5ae13f161ea2..000000000000 --- a/Documentation/acpi/ssdt-overlays.txt +++ /dev/null @@ -1,172 +0,0 @@ - -In order to support ACPI open-ended hardware configurations (e.g. development -boards) we need a way to augment the ACPI configuration provided by the firmware -image. A common example is connecting sensors on I2C / SPI buses on development -boards. - -Although this can be accomplished by creating a kernel platform driver or -recompiling the firmware image with updated ACPI tables, neither is practical: -the former proliferates board specific kernel code while the latter requires -access to firmware tools which are often not publicly available. - -Because ACPI supports external references in AML code a more practical -way to augment firmware ACPI configuration is by dynamically loading -user defined SSDT tables that contain the board specific information. - -For example, to enumerate a Bosch BMA222E accelerometer on the I2C bus of the -Minnowboard MAX development board exposed via the LSE connector [1], the -following ASL code can be used: - -DefinitionBlock ("minnowmax.aml", "SSDT", 1, "Vendor", "Accel", 0x00000003) -{ - External (\_SB.I2C6, DeviceObj) - - Scope (\_SB.I2C6) - { - Device (STAC) - { - Name (_ADR, Zero) - Name (_HID, "BMA222E") - - Method (_CRS, 0, Serialized) - { - Name (RBUF, ResourceTemplate () - { - I2cSerialBus (0x0018, ControllerInitiated, 0x00061A80, - AddressingMode7Bit, "\\_SB.I2C6", 0x00, - ResourceConsumer, ,) - GpioInt (Edge, ActiveHigh, Exclusive, PullDown, 0x0000, - "\\_SB.GPO2", 0x00, ResourceConsumer, , ) - { // Pin list - 0 - } - }) - Return (RBUF) - } - } - } -} - -which can then be compiled to AML binary format: - -$ iasl minnowmax.asl - -Intel ACPI Component Architecture -ASL Optimizing Compiler version 20140214-64 [Mar 29 2014] -Copyright (c) 2000 - 2014 Intel Corporation - -ASL Input: minnomax.asl - 30 lines, 614 bytes, 7 keywords -AML Output: minnowmax.aml - 165 bytes, 6 named objects, 1 executable opcodes - -[1] http://wiki.minnowboard.org/MinnowBoard_MAX#Low_Speed_Expansion_Connector_.28Top.29 - -The resulting AML code can then be loaded by the kernel using one of the methods -below. - -== Loading ACPI SSDTs from initrd == - -This option allows loading of user defined SSDTs from initrd and it is useful -when the system does not support EFI or when there is not enough EFI storage. - -It works in a similar way with initrd based ACPI tables override/upgrade: SSDT -aml code must be placed in the first, uncompressed, initrd under the -"kernel/firmware/acpi" path. Multiple files can be used and this will translate -in loading multiple tables. Only SSDT and OEM tables are allowed. See -initrd_table_override.txt for more details. - -Here is an example: - -# Add the raw ACPI tables to an uncompressed cpio archive. -# They must be put into a /kernel/firmware/acpi directory inside the -# cpio archive. -# The uncompressed cpio archive must be the first. -# Other, typically compressed cpio archives, must be -# concatenated on top of the uncompressed one. -mkdir -p kernel/firmware/acpi -cp ssdt.aml kernel/firmware/acpi - -# Create the uncompressed cpio archive and concatenate the original initrd -# on top: -find kernel | cpio -H newc --create > /boot/instrumented_initrd -cat /boot/initrd >>/boot/instrumented_initrd - -== Loading ACPI SSDTs from EFI variables == - -This is the preferred method, when EFI is supported on the platform, because it -allows a persistent, OS independent way of storing the user defined SSDTs. There -is also work underway to implement EFI support for loading user defined SSDTs -and using this method will make it easier to convert to the EFI loading -mechanism when that will arrive. - -In order to load SSDTs from an EFI variable the efivar_ssdt kernel command line -parameter can be used. The argument for the option is the variable name to -use. If there are multiple variables with the same name but with different -vendor GUIDs, all of them will be loaded. - -In order to store the AML code in an EFI variable the efivarfs filesystem can be -used. It is enabled and mounted by default in /sys/firmware/efi/efivars in all -recent distribution. - -Creating a new file in /sys/firmware/efi/efivars will automatically create a new -EFI variable. Updating a file in /sys/firmware/efi/efivars will update the EFI -variable. Please note that the file name needs to be specially formatted as -"Name-GUID" and that the first 4 bytes in the file (little-endian format) -represent the attributes of the EFI variable (see EFI_VARIABLE_MASK in -include/linux/efi.h). Writing to the file must also be done with one write -operation. - -For example, you can use the following bash script to create/update an EFI -variable with the content from a given file: - -#!/bin/sh -e - -while ! [ -z "$1" ]; do - case "$1" in - "-f") filename="$2"; shift;; - "-g") guid="$2"; shift;; - *) name="$1";; - esac - shift -done - -usage() -{ - echo "Syntax: ${0##*/} -f filename [ -g guid ] name" - exit 1 -} - -[ -n "$name" -a -f "$filename" ] || usage - -EFIVARFS="/sys/firmware/efi/efivars" - -[ -d "$EFIVARFS" ] || exit 2 - -if stat -tf $EFIVARFS | grep -q -v de5e81e4; then - mount -t efivarfs none $EFIVARFS -fi - -# try to pick up an existing GUID -[ -n "$guid" ] || guid=$(find "$EFIVARFS" -name "$name-*" | head -n1 | cut -f2- -d-) - -# use a randomly generated GUID -[ -n "$guid" ] || guid="$(cat /proc/sys/kernel/random/uuid)" - -# efivarfs expects all of the data in one write -tmp=$(mktemp) -/bin/echo -ne "\007\000\000\000" | cat - $filename > $tmp -dd if=$tmp of="$EFIVARFS/$name-$guid" bs=$(stat -c %s $tmp) -rm $tmp - -== Loading ACPI SSDTs from configfs == - -This option allows loading of user defined SSDTs from userspace via the configfs -interface. The CONFIG_ACPI_CONFIGFS option must be select and configfs must be -mounted. In the following examples, we assume that configfs has been mounted in -/config. - -New tables can be loading by creating new directories in /config/acpi/table/ and -writing the SSDT aml code in the aml attribute: - -cd /config/acpi/table -mkdir my_ssdt -cat ~/ssdt.aml > my_ssdt/aml diff --git a/Documentation/acpi/cppc_sysfs.txt b/Documentation/admin-guide/acpi/cppc_sysfs.rst index f20fb445135d..a4b99afbe331 100644 --- a/Documentation/acpi/cppc_sysfs.txt +++ b/Documentation/admin-guide/acpi/cppc_sysfs.rst @@ -1,5 +1,11 @@ +.. SPDX-License-Identifier: GPL-2.0 - Collaborative Processor Performance Control (CPPC) +================================================== +Collaborative Processor Performance Control (CPPC) +================================================== + +CPPC +==== CPPC defined in the ACPI spec describes a mechanism for the OS to manage the performance of a logical processor on a contigious and abstract performance @@ -10,31 +16,28 @@ For more details on CPPC please refer to the ACPI specification at: http://uefi.org/specifications -Some of the CPPC registers are exposed via sysfs under: - -/sys/devices/system/cpu/cpuX/acpi_cppc/ - -for each cpu X +Some of the CPPC registers are exposed via sysfs under:: --------------------------------------------------------------------------------- + /sys/devices/system/cpu/cpuX/acpi_cppc/ -$ ls -lR /sys/devices/system/cpu/cpu0/acpi_cppc/ -/sys/devices/system/cpu/cpu0/acpi_cppc/: -total 0 --r--r--r-- 1 root root 65536 Mar 5 19:38 feedback_ctrs --r--r--r-- 1 root root 65536 Mar 5 19:38 highest_perf --r--r--r-- 1 root root 65536 Mar 5 19:38 lowest_freq --r--r--r-- 1 root root 65536 Mar 5 19:38 lowest_nonlinear_perf --r--r--r-- 1 root root 65536 Mar 5 19:38 lowest_perf --r--r--r-- 1 root root 65536 Mar 5 19:38 nominal_freq --r--r--r-- 1 root root 65536 Mar 5 19:38 nominal_perf --r--r--r-- 1 root root 65536 Mar 5 19:38 reference_perf --r--r--r-- 1 root root 65536 Mar 5 19:38 wraparound_time +for each cpu X:: --------------------------------------------------------------------------------- + $ ls -lR /sys/devices/system/cpu/cpu0/acpi_cppc/ + /sys/devices/system/cpu/cpu0/acpi_cppc/: + total 0 + -r--r--r-- 1 root root 65536 Mar 5 19:38 feedback_ctrs + -r--r--r-- 1 root root 65536 Mar 5 19:38 highest_perf + -r--r--r-- 1 root root 65536 Mar 5 19:38 lowest_freq + -r--r--r-- 1 root root 65536 Mar 5 19:38 lowest_nonlinear_perf + -r--r--r-- 1 root root 65536 Mar 5 19:38 lowest_perf + -r--r--r-- 1 root root 65536 Mar 5 19:38 nominal_freq + -r--r--r-- 1 root root 65536 Mar 5 19:38 nominal_perf + -r--r--r-- 1 root root 65536 Mar 5 19:38 reference_perf + -r--r--r-- 1 root root 65536 Mar 5 19:38 wraparound_time * highest_perf : Highest performance of this processor (abstract scale). -* nominal_perf : Highest sustained performance of this processor (abstract scale). +* nominal_perf : Highest sustained performance of this processor + (abstract scale). * lowest_nonlinear_perf : Lowest performance of this processor with nonlinear power savings (abstract scale). * lowest_perf : Lowest performance of this processor (abstract scale). @@ -48,22 +51,26 @@ total 0 * feedback_ctrs : Includes both Reference and delivered performance counter. Reference counter ticks up proportional to processor's reference performance. Delivered counter ticks up proportional to processor's delivered performance. -* wraparound_time: Minimum time for the feedback counters to wraparound (seconds). +* wraparound_time: Minimum time for the feedback counters to wraparound + (seconds). * reference_perf : Performance level at which reference performance counter accumulates (abstract scale). --------------------------------------------------------------------------------- - Computing Average Delivered Performance +Computing Average Delivered Performance +======================================= + +Below describes the steps to compute the average performance delivered by +taking two different snapshots of feedback counters at time T1 and T2. + + T1: Read feedback_ctrs as fbc_t1 + Wait or run some workload -Below describes the steps to compute the average performance delivered by taking -two different snapshots of feedback counters at time T1 and T2. + T2: Read feedback_ctrs as fbc_t2 -T1: Read feedback_ctrs as fbc_t1 - Wait or run some workload -T2: Read feedback_ctrs as fbc_t2 +:: -delivered_counter_delta = fbc_t2[del] - fbc_t1[del] -reference_counter_delta = fbc_t2[ref] - fbc_t1[ref] + delivered_counter_delta = fbc_t2[del] - fbc_t1[del] + reference_counter_delta = fbc_t2[ref] - fbc_t1[ref] -delivered_perf = (refernce_perf x delivered_counter_delta) / reference_counter_delta + delivered_perf = (refernce_perf x delivered_counter_delta) / reference_counter_delta diff --git a/Documentation/acpi/dsdt-override.txt b/Documentation/admin-guide/acpi/dsdt-override.rst index 784841caa6e6..50bd7f194bf4 100644 --- a/Documentation/acpi/dsdt-override.txt +++ b/Documentation/admin-guide/acpi/dsdt-override.rst @@ -1,6 +1,12 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=============== +Overriding DSDT +=============== + Linux supports a method of overriding the BIOS DSDT: -CONFIG_ACPI_CUSTOM_DSDT builds the image into the kernel. +CONFIG_ACPI_CUSTOM_DSDT - builds the image into the kernel. When to use this method is described in detail on the Linux/ACPI home page: diff --git a/Documentation/admin-guide/acpi/index.rst b/Documentation/admin-guide/acpi/index.rst new file mode 100644 index 000000000000..4d13eeea1eca --- /dev/null +++ b/Documentation/admin-guide/acpi/index.rst @@ -0,0 +1,14 @@ +============ +ACPI Support +============ + +Here we document in detail how to interact with various mechanisms in +the Linux ACPI support. + +.. toctree:: + :maxdepth: 1 + + initrd_table_override + dsdt-override + ssdt-overlays + cppc_sysfs diff --git a/Documentation/admin-guide/acpi/initrd_table_override.rst b/Documentation/admin-guide/acpi/initrd_table_override.rst new file mode 100644 index 000000000000..cbd768207631 --- /dev/null +++ b/Documentation/admin-guide/acpi/initrd_table_override.rst @@ -0,0 +1,115 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================================ +Upgrading ACPI tables via initrd +================================ + +What is this about +================== + +If the ACPI_TABLE_UPGRADE compile option is true, it is possible to +upgrade the ACPI execution environment that is defined by the ACPI tables +via upgrading the ACPI tables provided by the BIOS with an instrumented, +modified, more recent version one, or installing brand new ACPI tables. + +When building initrd with kernel in a single image, option +ACPI_TABLE_OVERRIDE_VIA_BUILTIN_INITRD should also be true for this +feature to work. + +For a full list of ACPI tables that can be upgraded/installed, take a look +at the char `*table_sigs[MAX_ACPI_SIGNATURE];` definition in +drivers/acpi/tables.c. + +All ACPI tables iasl (Intel's ACPI compiler and disassembler) knows should +be overridable, except: + + - ACPI_SIG_RSDP (has a signature of 6 bytes) + - ACPI_SIG_FACS (does not have an ordinary ACPI table header) + +Both could get implemented as well. + + +What is this for +================ + +Complain to your platform/BIOS vendor if you find a bug which is so severe +that a workaround is not accepted in the Linux kernel. And this facility +allows you to upgrade the buggy tables before your platform/BIOS vendor +releases an upgraded BIOS binary. + +This facility can be used by platform/BIOS vendors to provide a Linux +compatible environment without modifying the underlying platform firmware. + +This facility also provides a powerful feature to easily debug and test +ACPI BIOS table compatibility with the Linux kernel by modifying old +platform provided ACPI tables or inserting new ACPI tables. + +It can and should be enabled in any kernel because there is no functional +change with not instrumented initrds. + + +How does it work +================ +:: + + # Extract the machine's ACPI tables: + cd /tmp + acpidump >acpidump + acpixtract -a acpidump + # Disassemble, modify and recompile them: + iasl -d *.dat + # For example add this statement into a _PRT (PCI Routing Table) function + # of the DSDT: + Store("HELLO WORLD", debug) + # And increase the OEM Revision. For example, before modification: + DefinitionBlock ("DSDT.aml", "DSDT", 2, "INTEL ", "TEMPLATE", 0x00000000) + # After modification: + DefinitionBlock ("DSDT.aml", "DSDT", 2, "INTEL ", "TEMPLATE", 0x00000001) + iasl -sa dsdt.dsl + # Add the raw ACPI tables to an uncompressed cpio archive. + # They must be put into a /kernel/firmware/acpi directory inside the cpio + # archive. Note that if the table put here matches a platform table + # (similar Table Signature, and similar OEMID, and similar OEM Table ID) + # with a more recent OEM Revision, the platform table will be upgraded by + # this table. If the table put here doesn't match a platform table + # (dissimilar Table Signature, or dissimilar OEMID, or dissimilar OEM Table + # ID), this table will be appended. + mkdir -p kernel/firmware/acpi + cp dsdt.aml kernel/firmware/acpi + # A maximum of "NR_ACPI_INITRD_TABLES (64)" tables are currently allowed + # (see osl.c): + iasl -sa facp.dsl + iasl -sa ssdt1.dsl + cp facp.aml kernel/firmware/acpi + cp ssdt1.aml kernel/firmware/acpi + # The uncompressed cpio archive must be the first. Other, typically + # compressed cpio archives, must be concatenated on top of the uncompressed + # one. Following command creates the uncompressed cpio archive and + # concatenates the original initrd on top: + find kernel | cpio -H newc --create > /boot/instrumented_initrd + cat /boot/initrd >>/boot/instrumented_initrd + # reboot with increased acpi debug level, e.g. boot params: + acpi.debug_level=0x2 acpi.debug_layer=0xFFFFFFFF + # and check your syslog: + [ 1.268089] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] + [ 1.272091] [ACPI Debug] String [0x0B] "HELLO WORLD" + +iasl is able to disassemble and recompile quite a lot different, +also static ACPI tables. + + +Where to retrieve userspace tools +================================= + +iasl and acpixtract are part of Intel's ACPICA project: +http://acpica.org/ + +and should be packaged by distributions (for example in the acpica package +on SUSE). + +acpidump can be found in Len Browns pmtools: +ftp://kernel.org/pub/linux/kernel/people/lenb/acpi/utils/pmtools/acpidump + +This tool is also part of the acpica package on SUSE. +Alternatively, used ACPI tables can be retrieved via sysfs in latest kernels: +/sys/firmware/acpi/tables diff --git a/Documentation/admin-guide/acpi/ssdt-overlays.rst b/Documentation/admin-guide/acpi/ssdt-overlays.rst new file mode 100644 index 000000000000..da37455f96c9 --- /dev/null +++ b/Documentation/admin-guide/acpi/ssdt-overlays.rst @@ -0,0 +1,180 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============= +SSDT Overlays +============= + +In order to support ACPI open-ended hardware configurations (e.g. development +boards) we need a way to augment the ACPI configuration provided by the firmware +image. A common example is connecting sensors on I2C / SPI buses on development +boards. + +Although this can be accomplished by creating a kernel platform driver or +recompiling the firmware image with updated ACPI tables, neither is practical: +the former proliferates board specific kernel code while the latter requires +access to firmware tools which are often not publicly available. + +Because ACPI supports external references in AML code a more practical +way to augment firmware ACPI configuration is by dynamically loading +user defined SSDT tables that contain the board specific information. + +For example, to enumerate a Bosch BMA222E accelerometer on the I2C bus of the +Minnowboard MAX development board exposed via the LSE connector [1], the +following ASL code can be used:: + + DefinitionBlock ("minnowmax.aml", "SSDT", 1, "Vendor", "Accel", 0x00000003) + { + External (\_SB.I2C6, DeviceObj) + + Scope (\_SB.I2C6) + { + Device (STAC) + { + Name (_ADR, Zero) + Name (_HID, "BMA222E") + + Method (_CRS, 0, Serialized) + { + Name (RBUF, ResourceTemplate () + { + I2cSerialBus (0x0018, ControllerInitiated, 0x00061A80, + AddressingMode7Bit, "\\_SB.I2C6", 0x00, + ResourceConsumer, ,) + GpioInt (Edge, ActiveHigh, Exclusive, PullDown, 0x0000, + "\\_SB.GPO2", 0x00, ResourceConsumer, , ) + { // Pin list + 0 + } + }) + Return (RBUF) + } + } + } + } + +which can then be compiled to AML binary format:: + + $ iasl minnowmax.asl + + Intel ACPI Component Architecture + ASL Optimizing Compiler version 20140214-64 [Mar 29 2014] + Copyright (c) 2000 - 2014 Intel Corporation + + ASL Input: minnomax.asl - 30 lines, 614 bytes, 7 keywords + AML Output: minnowmax.aml - 165 bytes, 6 named objects, 1 executable opcodes + +[1] http://wiki.minnowboard.org/MinnowBoard_MAX#Low_Speed_Expansion_Connector_.28Top.29 + +The resulting AML code can then be loaded by the kernel using one of the methods +below. + +Loading ACPI SSDTs from initrd +============================== + +This option allows loading of user defined SSDTs from initrd and it is useful +when the system does not support EFI or when there is not enough EFI storage. + +It works in a similar way with initrd based ACPI tables override/upgrade: SSDT +aml code must be placed in the first, uncompressed, initrd under the +"kernel/firmware/acpi" path. Multiple files can be used and this will translate +in loading multiple tables. Only SSDT and OEM tables are allowed. See +initrd_table_override.txt for more details. + +Here is an example:: + + # Add the raw ACPI tables to an uncompressed cpio archive. + # They must be put into a /kernel/firmware/acpi directory inside the + # cpio archive. + # The uncompressed cpio archive must be the first. + # Other, typically compressed cpio archives, must be + # concatenated on top of the uncompressed one. + mkdir -p kernel/firmware/acpi + cp ssdt.aml kernel/firmware/acpi + + # Create the uncompressed cpio archive and concatenate the original initrd + # on top: + find kernel | cpio -H newc --create > /boot/instrumented_initrd + cat /boot/initrd >>/boot/instrumented_initrd + +Loading ACPI SSDTs from EFI variables +===================================== + +This is the preferred method, when EFI is supported on the platform, because it +allows a persistent, OS independent way of storing the user defined SSDTs. There +is also work underway to implement EFI support for loading user defined SSDTs +and using this method will make it easier to convert to the EFI loading +mechanism when that will arrive. + +In order to load SSDTs from an EFI variable the efivar_ssdt kernel command line +parameter can be used. The argument for the option is the variable name to +use. If there are multiple variables with the same name but with different +vendor GUIDs, all of them will be loaded. + +In order to store the AML code in an EFI variable the efivarfs filesystem can be +used. It is enabled and mounted by default in /sys/firmware/efi/efivars in all +recent distribution. + +Creating a new file in /sys/firmware/efi/efivars will automatically create a new +EFI variable. Updating a file in /sys/firmware/efi/efivars will update the EFI +variable. Please note that the file name needs to be specially formatted as +"Name-GUID" and that the first 4 bytes in the file (little-endian format) +represent the attributes of the EFI variable (see EFI_VARIABLE_MASK in +include/linux/efi.h). Writing to the file must also be done with one write +operation. + +For example, you can use the following bash script to create/update an EFI +variable with the content from a given file:: + + #!/bin/sh -e + + while ! [ -z "$1" ]; do + case "$1" in + "-f") filename="$2"; shift;; + "-g") guid="$2"; shift;; + *) name="$1";; + esac + shift + done + + usage() + { + echo "Syntax: ${0##*/} -f filename [ -g guid ] name" + exit 1 + } + + [ -n "$name" -a -f "$filename" ] || usage + + EFIVARFS="/sys/firmware/efi/efivars" + + [ -d "$EFIVARFS" ] || exit 2 + + if stat -tf $EFIVARFS | grep -q -v de5e81e4; then + mount -t efivarfs none $EFIVARFS + fi + + # try to pick up an existing GUID + [ -n "$guid" ] || guid=$(find "$EFIVARFS" -name "$name-*" | head -n1 | cut -f2- -d-) + + # use a randomly generated GUID + [ -n "$guid" ] || guid="$(cat /proc/sys/kernel/random/uuid)" + + # efivarfs expects all of the data in one write + tmp=$(mktemp) + /bin/echo -ne "\007\000\000\000" | cat - $filename > $tmp + dd if=$tmp of="$EFIVARFS/$name-$guid" bs=$(stat -c %s $tmp) + rm $tmp + +Loading ACPI SSDTs from configfs +================================ + +This option allows loading of user defined SSDTs from userspace via the configfs +interface. The CONFIG_ACPI_CONFIGFS option must be select and configfs must be +mounted. In the following examples, we assume that configfs has been mounted in +/config. + +New tables can be loading by creating new directories in /config/acpi/table/ and +writing the SSDT aml code in the aml attribute:: + + cd /config/acpi/table + mkdir my_ssdt + cat ~/ssdt.aml > my_ssdt/aml diff --git a/Documentation/admin-guide/index.rst b/Documentation/admin-guide/index.rst index 0a491676685e..5b8286fdd91b 100644 --- a/Documentation/admin-guide/index.rst +++ b/Documentation/admin-guide/index.rst @@ -77,6 +77,7 @@ configure specific aspects of kernel behavior to your liking. LSM/index mm/index perf-security + acpi/index .. only:: subproject and html diff --git a/Documentation/driver-api/acpi/index.rst b/Documentation/driver-api/acpi/index.rst new file mode 100644 index 000000000000..ace0008e54c2 --- /dev/null +++ b/Documentation/driver-api/acpi/index.rst @@ -0,0 +1,9 @@ +============ +ACPI Support +============ + +.. toctree:: + :maxdepth: 2 + + linuxized-acpica + scan_handlers diff --git a/Documentation/acpi/linuxized-acpica.txt b/Documentation/driver-api/acpi/linuxized-acpica.rst index 3ad7b0dfb083..0ca8f1538519 100644 --- a/Documentation/acpi/linuxized-acpica.txt +++ b/Documentation/driver-api/acpi/linuxized-acpica.rst @@ -1,31 +1,37 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: <isonum.txt> + +============================================================ Linuxized ACPICA - Introduction to ACPICA Release Automation +============================================================ -Copyright (C) 2013-2016, Intel Corporation -Author: Lv Zheng <lv.zheng@intel.com> +:Copyright: |copy| 2013-2016, Intel Corporation +:Author: Lv Zheng <lv.zheng@intel.com> -Abstract: +Abstract +======== This document describes the ACPICA project and the relationship between ACPICA and Linux. It also describes how ACPICA code in drivers/acpi/acpica, include/acpi and tools/power/acpi is automatically updated to follow the upstream. +ACPICA Project +============== -1. ACPICA Project - - The ACPI Component Architecture (ACPICA) project provides an operating - system (OS)-independent reference implementation of the Advanced - Configuration and Power Interface Specification (ACPI). It has been - adapted by various host OSes. By directly integrating ACPICA, Linux can - also benefit from the application experiences of ACPICA from other host - OSes. +The ACPI Component Architecture (ACPICA) project provides an operating +system (OS)-independent reference implementation of the Advanced +Configuration and Power Interface Specification (ACPI). It has been +adapted by various host OSes. By directly integrating ACPICA, Linux can +also benefit from the application experiences of ACPICA from other host +OSes. - The homepage of ACPICA project is: www.acpica.org, it is maintained and - supported by Intel Corporation. +The homepage of ACPICA project is: www.acpica.org, it is maintained and +supported by Intel Corporation. - The following figure depicts the Linux ACPI subsystem where the ACPICA - adaptation is included: +The following figure depicts the Linux ACPI subsystem where the ACPICA +adaptation is included:: +---------------------------------------------------------+ | | @@ -71,21 +77,27 @@ upstream. Figure 1. Linux ACPI Software Components - NOTE: +.. note:: A. OS Service Layer - Provided by Linux to offer OS dependent implementation of the predefined ACPICA interfaces (acpi_os_*). + :: + include/acpi/acpiosxf.h drivers/acpi/osl.c include/acpi/platform include/asm/acenv.h B. ACPICA Functionality - Released from ACPICA code base to offer OS independent implementation of the ACPICA interfaces (acpi_*). + :: + drivers/acpi/acpica include/acpi/ac*.h tools/power/acpi C. Linux/ACPI Functionality - Providing Linux specific ACPI functionality to the other Linux kernel subsystems and user space programs. + :: + drivers/acpi include/linux/acpi.h include/linux/acpi*.h @@ -95,24 +107,27 @@ upstream. ACPI subsystem to offer architecture specific implementation of the ACPI interfaces. They are Linux specific components and are out of the scope of this document. + :: + include/asm/acpi.h include/asm/acpi*.h arch/*/acpi -2. ACPICA Release +ACPICA Release +============== - The ACPICA project maintains its code base at the following repository URL: - https://github.com/acpica/acpica.git. As a rule, a release is made every - month. +The ACPICA project maintains its code base at the following repository URL: +https://github.com/acpica/acpica.git. As a rule, a release is made every +month. - As the coding style adopted by the ACPICA project is not acceptable by - Linux, there is a release process to convert the ACPICA git commits into - Linux patches. The patches generated by this process are referred to as - "linuxized ACPICA patches". The release process is carried out on a local - copy the ACPICA git repository. Each commit in the monthly release is - converted into a linuxized ACPICA patch. Together, they form the monthly - ACPICA release patchset for the Linux ACPI community. This process is - illustrated in the following figure: +As the coding style adopted by the ACPICA project is not acceptable by +Linux, there is a release process to convert the ACPICA git commits into +Linux patches. The patches generated by this process are referred to as +"linuxized ACPICA patches". The release process is carried out on a local +copy the ACPICA git repository. Each commit in the monthly release is +converted into a linuxized ACPICA patch. Together, they form the monthly +ACPICA release patchset for the Linux ACPI community. This process is +illustrated in the following figure:: +-----------------------------+ | acpica / master (-) commits | @@ -153,7 +168,7 @@ upstream. Figure 2. ACPICA -> Linux Upstream Process - NOTE: +.. note:: A. Linuxize Utilities - Provided by the ACPICA repository, including a utility located in source/tools/acpisrc folder and a number of scripts located in generate/linux folder. @@ -170,19 +185,20 @@ upstream. following kernel configuration options: CONFIG_ACPI/CONFIG_ACPI_DEBUG/CONFIG_ACPI_DEBUGGER -3. ACPICA Divergences +ACPICA Divergences +================== - Ideally, all of the ACPICA commits should be converted into Linux patches - automatically without manual modifications, the "linux / master" tree should - contain the ACPICA code that exactly corresponds to the ACPICA code - contained in "new linuxized acpica" tree and it should be possible to run - the release process fully automatically. +Ideally, all of the ACPICA commits should be converted into Linux patches +automatically without manual modifications, the "linux / master" tree should +contain the ACPICA code that exactly corresponds to the ACPICA code +contained in "new linuxized acpica" tree and it should be possible to run +the release process fully automatically. - As a matter of fact, however, there are source code differences between - the ACPICA code in Linux and the upstream ACPICA code, referred to as - "ACPICA Divergences". +As a matter of fact, however, there are source code differences between +the ACPICA code in Linux and the upstream ACPICA code, referred to as +"ACPICA Divergences". - The various sources of ACPICA divergences include: +The various sources of ACPICA divergences include: 1. Legacy divergences - Before the current ACPICA release process was established, there already had been divergences between Linux and ACPICA. Over the past several years those divergences have been greatly @@ -213,11 +229,12 @@ upstream. rebased on the ACPICA side in order to offer better solutions, new ACPICA divergences are generated. -4. ACPICA Development +ACPICA Development +================== - This paragraph guides Linux developers to use the ACPICA upstream release - utilities to obtain Linux patches corresponding to upstream ACPICA commits - before they become available from the ACPICA release process. +This paragraph guides Linux developers to use the ACPICA upstream release +utilities to obtain Linux patches corresponding to upstream ACPICA commits +before they become available from the ACPICA release process. 1. Cherry-pick an ACPICA commit @@ -225,7 +242,7 @@ upstream. you want to cherry pick must be committed into the local repository. Then the gen-patch.sh command can help to cherry-pick an ACPICA commit - from the ACPICA local repository: + from the ACPICA local repository:: $ git clone https://github.com/acpica/acpica $ cd acpica @@ -240,7 +257,7 @@ upstream. changes that haven't been applied to Linux yet. You can generate the ACPICA release series yourself and rebase your code on - top of the generated ACPICA release patches: + top of the generated ACPICA release patches:: $ git clone https://github.com/acpica/acpica $ cd acpica @@ -254,7 +271,7 @@ upstream. 3. Inspect the current divergences If you have local copies of both Linux and upstream ACPICA, you can generate - a diff file indicating the state of the current divergences: + a diff file indicating the state of the current divergences:: # git clone https://github.com/acpica/acpica # git clone http://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git diff --git a/Documentation/acpi/scan_handlers.txt b/Documentation/driver-api/acpi/scan_handlers.rst index 3246ccf15992..7a197b3a33fc 100644 --- a/Documentation/acpi/scan_handlers.txt +++ b/Documentation/driver-api/acpi/scan_handlers.rst @@ -1,7 +1,13 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: <isonum.txt> + +================== ACPI Scan Handlers +================== + +:Copyright: |copy| 2012, Intel Corporation -Copyright (C) 2012, Intel Corporation -Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com> +:Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com> During system initialization and ACPI-based device hot-add, the ACPI namespace is scanned in search of device objects that generally represent various pieces @@ -30,14 +36,14 @@ to configure that link so that the kernel can use it. Those additional configuration tasks usually depend on the type of the hardware component represented by the given device node which can be determined on the basis of the device node's hardware ID (HID). They are performed by objects -called ACPI scan handlers represented by the following structure: +called ACPI scan handlers represented by the following structure:: -struct acpi_scan_handler { - const struct acpi_device_id *ids; - struct list_head list_node; - int (*attach)(struct acpi_device *dev, const struct acpi_device_id *id); - void (*detach)(struct acpi_device *dev); -}; + struct acpi_scan_handler { + const struct acpi_device_id *ids; + struct list_head list_node; + int (*attach)(struct acpi_device *dev, const struct acpi_device_id *id); + void (*detach)(struct acpi_device *dev); + }; where ids is the list of IDs of device nodes the given handler is supposed to take care of, list_node is the hook to the global list of ACPI scan handlers diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst index c0b600ed9961..aa87075c7846 100644 --- a/Documentation/driver-api/index.rst +++ b/Documentation/driver-api/index.rst @@ -56,6 +56,7 @@ available subsections can be seen below. slimbus soundwire/index fpga/index + acpi/index .. only:: subproject and html diff --git a/Documentation/acpi/DSD-properties-rules.txt b/Documentation/firmware-guide/acpi/DSD-properties-rules.rst index 3e4862bdad98..4306f29b6103 100644 --- a/Documentation/acpi/DSD-properties-rules.txt +++ b/Documentation/firmware-guide/acpi/DSD-properties-rules.rst @@ -1,8 +1,11 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================================== _DSD Device Properties Usage Rules ----------------------------------- +================================== Properties, Property Sets and Property Subsets ----------------------------------------------- +============================================== The _DSD (Device Specific Data) configuration object, introduced in ACPI 5.1, allows any type of device configuration data to be provided via the ACPI @@ -18,7 +21,7 @@ specific type) associated with it. In the ACPI _DSD context it is an element of the sub-package following the generic Device Properties UUID in the _DSD return package as specified in the -Device Properties UUID definition document [1]. +Device Properties UUID definition document [1]_. It also may be regarded as the definition of a key and the associated data type that can be returned by _DSD in the Device Properties UUID sub-package for a @@ -33,14 +36,14 @@ Property subsets are nested collections of properties. Each of them is associated with an additional key (name) allowing the subset to be referred to as a whole (and to be treated as a separate entity). The canonical representation of property subsets is via the mechanism specified in the -Hierarchical Properties Extension UUID definition document [2]. +Hierarchical Properties Extension UUID definition document [2]_. Property sets may be hierarchical. That is, a property set may contain multiple property subsets that each may contain property subsets of its own and so on. General Validity Rule for Property Sets ---------------------------------------- +======================================= Valid property sets must follow the guidance given by the Device Properties UUID definition document [1]. @@ -73,7 +76,7 @@ suitable for the ACPI environment and consequently they cannot belong to a valid property set. Property Sets and Device Tree Bindings --------------------------------------- +====================================== It often is useful to make _DSD return property sets that follow Device Tree bindings. @@ -91,7 +94,7 @@ expected to automatically work in the ACPI environment regardless of their contents. References ----------- +========== -[1] http://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf -[2] http://www.uefi.org/sites/default/files/resources/_DSD-hierarchical-data-extension-UUID-v1.1.pdf +.. [1] http://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf +.. [2] http://www.uefi.org/sites/default/files/resources/_DSD-hierarchical-data-extension-UUID-v1.1.pdf diff --git a/Documentation/acpi/acpi-lid.txt b/Documentation/firmware-guide/acpi/acpi-lid.rst index effe7af3a5af..874ce0ed340d 100644 --- a/Documentation/acpi/acpi-lid.txt +++ b/Documentation/firmware-guide/acpi/acpi-lid.rst @@ -1,13 +1,18 @@ -Special Usage Model of the ACPI Control Method Lid Device +.. SPDX-License-Identifier: GPL-2.0 +.. include:: <isonum.txt> -Copyright (C) 2016, Intel Corporation -Author: Lv Zheng <lv.zheng@intel.com> +========================================================= +Special Usage Model of the ACPI Control Method Lid Device +========================================================= +:Copyright: |copy| 2016, Intel Corporation -Abstract: +:Author: Lv Zheng <lv.zheng@intel.com> -Platforms containing lids convey lid state (open/close) to OSPMs using a -control method lid device. To implement this, the AML tables issue +Abstract +======== +Platforms containing lids convey lid state (open/close) to OSPMs +using a control method lid device. To implement this, the AML tables issue Notify(lid_device, 0x80) to notify the OSPMs whenever the lid state has changed. The _LID control method for the lid device must be implemented to report the "current" state of the lid as either "opened" or "closed". @@ -19,7 +24,8 @@ taken into account. This document describes the restrictions and the expections of the Linux ACPI lid device driver. -1. Restrictions of the returning value of the _LID control method +Restrictions of the returning value of the _LID control method +============================================================== The _LID control method is described to return the "current" lid state. However the word of "current" has ambiguity, some buggy AML tables return @@ -30,7 +36,8 @@ initial returning value. When the AML tables implement this control method with cached value, the initial returning value is likely not reliable. There are platforms always retun "closed" as initial lid state. -2. Restrictions of the lid state change notifications +Restrictions of the lid state change notifications +================================================== There are buggy AML tables never notifying when the lid device state is changed to "opened". Thus the "opened" notification is not guaranteed. But @@ -39,18 +46,22 @@ state is changed to "closed". The "closed" notification is normally used to trigger some system power saving operations on Windows. Since it is fully tested, it is reliable from all AML tables. -3. Expections for the userspace users of the ACPI lid device driver +Expections for the userspace users of the ACPI lid device driver +================================================================ The ACPI button driver exports the lid state to the userspace via the -following file: +following file:: + /proc/acpi/button/lid/LID0/state + This file actually calls the _LID control method described above. And given the previous explanation, it is not reliable enough on some platforms. So it is advised for the userspace program to not to solely rely on this file to determine the actual lid state. The ACPI button driver emits the following input event to the userspace: - SW_LID + * SW_LID + The ACPI lid device driver is implemented to try to deliver the platform triggered events to the userspace. However, given the fact that the buggy firmware cannot make sure "opened"/"closed" events are paired, the ACPI @@ -59,20 +70,25 @@ button driver uses the following 3 modes in order not to trigger issues. If the userspace hasn't been prepared to ignore the unreliable "opened" events and the unreliable initial state notification, Linux users can use the following kernel parameters to handle the possible issues: + A. button.lid_init_state=method: When this option is specified, the ACPI button driver reports the initial lid state using the returning value of the _LID control method and whether the "opened"/"closed" events are paired fully relies on the firmware implementation. + This option can be used to fix some platforms where the returning value of the _LID control method is reliable but the initial lid state notification is missing. + This option is the default behavior during the period the userspace isn't ready to handle the buggy AML tables. + B. button.lid_init_state=open: When this option is specified, the ACPI button driver always reports the initial lid state as "opened" and whether the "opened"/"closed" events are paired fully relies on the firmware implementation. + This may fix some platforms where the returning value of the _LID control method is not reliable and the initial lid state notification is missing. @@ -80,6 +96,7 @@ B. button.lid_init_state=open: If the userspace has been prepared to ignore the unreliable "opened" events and the unreliable initial state notification, Linux users should always use the following kernel parameter: + C. button.lid_init_state=ignore: When this option is specified, the ACPI button driver never reports the initial lid state and there is a compensation mechanism implemented to @@ -89,6 +106,7 @@ C. button.lid_init_state=ignore: notifications can be delivered to the userspace when the lid is actually opens given that some AML tables do not send "opened" notifications reliably. + In this mode, if everything is correctly implemented by the platform firmware, the old userspace programs should still work. Otherwise, the new userspace programs are required to work with the ACPI button driver. diff --git a/Documentation/firmware-guide/acpi/aml-debugger.rst b/Documentation/firmware-guide/acpi/aml-debugger.rst new file mode 100644 index 000000000000..a889d43bc6c5 --- /dev/null +++ b/Documentation/firmware-guide/acpi/aml-debugger.rst @@ -0,0 +1,75 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: <isonum.txt> + +================ +The AML Debugger +================ + +:Copyright: |copy| 2016, Intel Corporation +:Author: Lv Zheng <lv.zheng@intel.com> + + +This document describes the usage of the AML debugger embedded in the Linux +kernel. + +1. Build the debugger +===================== + +The following kernel configuration items are required to enable the AML +debugger interface from the Linux kernel:: + + CONFIG_ACPI_DEBUGGER=y + CONFIG_ACPI_DEBUGGER_USER=m + +The userspace utilities can be built from the kernel source tree using +the following commands:: + + $ cd tools + $ make acpi + +The resultant userspace tool binary is then located at:: + + tools/power/acpi/acpidbg + +It can be installed to system directories by running "make install" (as a +sufficiently privileged user). + +2. Start the userspace debugger interface +========================================= + +After booting the kernel with the debugger built-in, the debugger can be +started by using the following commands:: + + # mount -t debugfs none /sys/kernel/debug + # modprobe acpi_dbg + # tools/power/acpi/acpidbg + +That spawns the interactive AML debugger environment where you can execute +debugger commands. + +The commands are documented in the "ACPICA Overview and Programmer Reference" +that can be downloaded from + +https://acpica.org/documentation + +The detailed debugger commands reference is located in Chapter 12 "ACPICA +Debugger Reference". The "help" command can be used for a quick reference. + +3. Stop the userspace debugger interface +======================================== + +The interactive debugger interface can be closed by pressing Ctrl+C or using +the "quit" or "exit" commands. When finished, unload the module with:: + + # rmmod acpi_dbg + +The module unloading may fail if there is an acpidbg instance running. + +4. Run the debugger in a script +=============================== + +It may be useful to run the AML debugger in a test script. "acpidbg" supports +this in a special "batch" mode. For example, the following command outputs +the entire ACPI namespace:: + + # acpidbg -b "namespace" diff --git a/Documentation/acpi/apei/einj.txt b/Documentation/firmware-guide/acpi/apei/einj.rst index e550c8b98139..e588bccf5158 100644 --- a/Documentation/acpi/apei/einj.txt +++ b/Documentation/firmware-guide/acpi/apei/einj.rst @@ -1,13 +1,16 @@ - APEI Error INJection - ~~~~~~~~~~~~~~~~~~~~ +.. SPDX-License-Identifier: GPL-2.0 + +==================== +APEI Error INJection +==================== EINJ provides a hardware error injection mechanism. It is very useful for debugging and testing APEI and RAS features in general. You need to check whether your BIOS supports EINJ first. For that, look -for early boot messages similar to this one: +for early boot messages similar to this one:: -ACPI: EINJ 0x000000007370A000 000150 (v01 INTEL 00000001 INTL 00000001) + ACPI: EINJ 0x000000007370A000 000150 (v01 INTEL 00000001 INTL 00000001) which shows that the BIOS is exposing an EINJ table - it is the mechanism through which the injection is done. @@ -23,11 +26,11 @@ order to see the APEI,EINJ,... functionality supported and exposed by the BIOS menu. To use EINJ, make sure the following are options enabled in your kernel -configuration: +configuration:: -CONFIG_DEBUG_FS -CONFIG_ACPI_APEI -CONFIG_ACPI_APEI_EINJ + CONFIG_DEBUG_FS + CONFIG_ACPI_APEI + CONFIG_ACPI_APEI_EINJ The EINJ user interface is in <debugfs mount point>/apei/einj. @@ -37,20 +40,22 @@ The following files belong to it: This file shows which error types are supported: + ================ =================================== Error Type Value Error Description - ================ ================= - 0x00000001 Processor Correctable - 0x00000002 Processor Uncorrectable non-fatal - 0x00000004 Processor Uncorrectable fatal - 0x00000008 Memory Correctable - 0x00000010 Memory Uncorrectable non-fatal - 0x00000020 Memory Uncorrectable fatal - 0x00000040 PCI Express Correctable - 0x00000080 PCI Express Uncorrectable fatal - 0x00000100 PCI Express Uncorrectable non-fatal - 0x00000200 Platform Correctable - 0x00000400 Platform Uncorrectable non-fatal - 0x00000800 Platform Uncorrectable fatal + ================ =================================== + 0x00000001 Processor Correctable + 0x00000002 Processor Uncorrectable non-fatal + 0x00000004 Processor Uncorrectable fatal + 0x00000008 Memory Correctable + 0x00000010 Memory Uncorrectable non-fatal + 0x00000020 Memory Uncorrectable fatal + 0x00000040 PCI Express Correctable + 0x00000080 PCI Express Uncorrectable fatal + 0x00000100 PCI Express Uncorrectable non-fatal + 0x00000200 Platform Correctable + 0x00000400 Platform Uncorrectable non-fatal + 0x00000800 Platform Uncorrectable fatal + ================ =================================== The format of the file contents are as above, except present are only the available error types. @@ -73,9 +78,12 @@ The following files belong to it: injection. Value is a bitmask as specified in ACPI5.0 spec for the SET_ERROR_TYPE_WITH_ADDRESS data structure: - Bit 0 - Processor APIC field valid (see param3 below). - Bit 1 - Memory address and mask valid (param1 and param2). - Bit 2 - PCIe (seg,bus,dev,fn) valid (see param4 below). + Bit 0 + Processor APIC field valid (see param3 below). + Bit 1 + Memory address and mask valid (param1 and param2). + Bit 2 + PCIe (seg,bus,dev,fn) valid (see param4 below). If set to zero, legacy behavior is mimicked where the type of injection specifies just one bit set, and param1 is multiplexed. @@ -121,7 +129,7 @@ BIOS versions based on the ACPI 5.0 specification have more control over the target of the injection. For processor-related errors (type 0x1, 0x2 and 0x4), you can set flags to 0x3 (param3 for bit 0, and param1 and param2 for bit 1) so that you have more information added to the error -signature being injected. The actual data passed is this: +signature being injected. The actual data passed is this:: memory_address = param1; memory_address_range = param2; @@ -131,7 +139,7 @@ signature being injected. The actual data passed is this: For memory errors (type 0x8, 0x10 and 0x20) the address is set using param1 with a mask in param2 (0x0 is equivalent to all ones). For PCI express errors (type 0x40, 0x80 and 0x100) the segment, bus, device and -function are specified using param1: +function are specified using param1:: 31 24 23 16 15 11 10 8 7 0 +-------------------------------------------------+ @@ -152,26 +160,26 @@ documentation for details (and expect changes to this API if vendors creativity in using this feature expands beyond our expectations). -An error injection example: +An error injection example:: -# cd /sys/kernel/debug/apei/einj -# cat available_error_type # See which errors can be injected -0x00000002 Processor Uncorrectable non-fatal -0x00000008 Memory Correctable -0x00000010 Memory Uncorrectable non-fatal -# echo 0x12345000 > param1 # Set memory address for injection -# echo $((-1 << 12)) > param2 # Mask 0xfffffffffffff000 - anywhere in this page -# echo 0x8 > error_type # Choose correctable memory error -# echo 1 > error_inject # Inject now + # cd /sys/kernel/debug/apei/einj + # cat available_error_type # See which errors can be injected + 0x00000002 Processor Uncorrectable non-fatal + 0x00000008 Memory Correctable + 0x00000010 Memory Uncorrectable non-fatal + # echo 0x12345000 > param1 # Set memory address for injection + # echo $((-1 << 12)) > param2 # Mask 0xfffffffffffff000 - anywhere in this page + # echo 0x8 > error_type # Choose correctable memory error + # echo 1 > error_inject # Inject now -You should see something like this in dmesg: +You should see something like this in dmesg:: -[22715.830801] EDAC sbridge MC3: HANDLING MCE MEMORY ERROR -[22715.834759] EDAC sbridge MC3: CPU 0: Machine Check Event: 0 Bank 7: 8c00004000010090 -[22715.834759] EDAC sbridge MC3: TSC 0 -[22715.834759] EDAC sbridge MC3: ADDR 12345000 EDAC sbridge MC3: MISC 144780c86 -[22715.834759] EDAC sbridge MC3: PROCESSOR 0:306e7 TIME 1422553404 SOCKET 0 APIC 0 -[22716.616173] EDAC MC3: 1 CE memory read error on CPU_SrcID#0_Channel#0_DIMM#0 (channel:0 slot:0 page:0x12345 offset:0x0 grain:32 syndrome:0x0 - area:DRAM err_code:0001:0090 socket:0 channel_mask:1 rank:0) + [22715.830801] EDAC sbridge MC3: HANDLING MCE MEMORY ERROR + [22715.834759] EDAC sbridge MC3: CPU 0: Machine Check Event: 0 Bank 7: 8c00004000010090 + [22715.834759] EDAC sbridge MC3: TSC 0 + [22715.834759] EDAC sbridge MC3: ADDR 12345000 EDAC sbridge MC3: MISC 144780c86 + [22715.834759] EDAC sbridge MC3: PROCESSOR 0:306e7 TIME 1422553404 SOCKET 0 APIC 0 + [22716.616173] EDAC MC3: 1 CE memory read error on CPU_SrcID#0_Channel#0_DIMM#0 (channel:0 slot:0 page:0x12345 offset:0x0 grain:32 syndrome:0x0 - area:DRAM err_code:0001:0090 socket:0 channel_mask:1 rank:0) For more information about EINJ, please refer to ACPI specification version 4.0, section 17.5 and ACPI 5.0, section 18.6. diff --git a/Documentation/firmware-guide/acpi/apei/output_format.rst b/Documentation/firmware-guide/acpi/apei/output_format.rst new file mode 100644 index 000000000000..c2e7ebddb529 --- /dev/null +++ b/Documentation/firmware-guide/acpi/apei/output_format.rst @@ -0,0 +1,150 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================== +APEI output format +================== + +APEI uses printk as hardware error reporting interface, the output +format is as follow:: + + <error record> := + APEI generic hardware error status + severity: <integer>, <severity string> + section: <integer>, severity: <integer>, <severity string> + flags: <integer> + <section flags strings> + fru_id: <uuid string> + fru_text: <string> + section_type: <section type string> + <section data> + + <severity string>* := recoverable | fatal | corrected | info + + <section flags strings># := + [primary][, containment warning][, reset][, threshold exceeded]\ + [, resource not accessible][, latent error] + + <section type string> := generic processor error | memory error | \ + PCIe error | unknown, <uuid string> + + <section data> := + <generic processor section data> | <memory section data> | \ + <pcie section data> | <null> + + <generic processor section data> := + [processor_type: <integer>, <proc type string>] + [processor_isa: <integer>, <proc isa string>] + [error_type: <integer> + <proc error type strings>] + [operation: <integer>, <proc operation string>] + [flags: <integer> + <proc flags strings>] + [level: <integer>] + [version_info: <integer>] + [processor_id: <integer>] + [target_address: <integer>] + [requestor_id: <integer>] + [responder_id: <integer>] + [IP: <integer>] + + <proc type string>* := IA32/X64 | IA64 + + <proc isa string>* := IA32 | IA64 | X64 + + <processor error type strings># := + [cache error][, TLB error][, bus error][, micro-architectural error] + + <proc operation string>* := unknown or generic | data read | data write | \ + instruction execution + + <proc flags strings># := + [restartable][, precise IP][, overflow][, corrected] + + <memory section data> := + [error_status: <integer>] + [physical_address: <integer>] + [physical_address_mask: <integer>] + [node: <integer>] + [card: <integer>] + [module: <integer>] + [bank: <integer>] + [device: <integer>] + [row: <integer>] + [column: <integer>] + [bit_position: <integer>] + [requestor_id: <integer>] + [responder_id: <integer>] + [target_id: <integer>] + [error_type: <integer>, <mem error type string>] + + <mem error type string>* := + unknown | no error | single-bit ECC | multi-bit ECC | \ + single-symbol chipkill ECC | multi-symbol chipkill ECC | master abort | \ + target abort | parity error | watchdog timeout | invalid address | \ + mirror Broken | memory sparing | scrub corrected error | \ + scrub uncorrected error + + <pcie section data> := + [port_type: <integer>, <pcie port type string>] + [version: <integer>.<integer>] + [command: <integer>, status: <integer>] + [device_id: <integer>:<integer>:<integer>.<integer> + slot: <integer> + secondary_bus: <integer> + vendor_id: <integer>, device_id: <integer> + class_code: <integer>] + [serial number: <integer>, <integer>] + [bridge: secondary_status: <integer>, control: <integer>] + [aer_status: <integer>, aer_mask: <integer> + <aer status string> + [aer_uncor_severity: <integer>] + aer_layer=<aer layer string>, aer_agent=<aer agent string> + aer_tlp_header: <integer> <integer> <integer> <integer>] + + <pcie port type string>* := PCIe end point | legacy PCI end point | \ + unknown | unknown | root port | upstream switch port | \ + downstream switch port | PCIe to PCI/PCI-X bridge | \ + PCI/PCI-X to PCIe bridge | root complex integrated endpoint device | \ + root complex event collector + + if section severity is fatal or recoverable + <aer status string># := + unknown | unknown | unknown | unknown | Data Link Protocol | \ + unknown | unknown | unknown | unknown | unknown | unknown | unknown | \ + Poisoned TLP | Flow Control Protocol | Completion Timeout | \ + Completer Abort | Unexpected Completion | Receiver Overflow | \ + Malformed TLP | ECRC | Unsupported Request + else + <aer status string># := + Receiver Error | unknown | unknown | unknown | unknown | unknown | \ + Bad TLP | Bad DLLP | RELAY_NUM Rollover | unknown | unknown | unknown | \ + Replay Timer Timeout | Advisory Non-Fatal + fi + + <aer layer string> := + Physical Layer | Data Link Layer | Transaction Layer + + <aer agent string> := + Receiver ID | Requester ID | Completer ID | Transmitter ID + +Where, [] designate corresponding content is optional + +All <field string> description with * has the following format:: + + field: <integer>, <field string> + +Where value of <integer> should be the position of "string" in <field +string> description. Otherwise, <field string> will be "unknown". + +All <field strings> description with # has the following format:: + + field: <integer> + <field strings> + +Where each string in <fields strings> corresponding to one set bit of +<integer>. The bit position is the position of "string" in <field +strings> description. + +For more detailed explanation of every field, please refer to UEFI +specification version 2.3 or later, section Appendix N: Common +Platform Error Record. diff --git a/Documentation/acpi/debug.txt b/Documentation/firmware-guide/acpi/debug.rst index 65bf47c46b6d..1a152dd1d765 100644 --- a/Documentation/acpi/debug.txt +++ b/Documentation/firmware-guide/acpi/debug.rst @@ -1,18 +1,21 @@ - ACPI Debug Output +.. SPDX-License-Identifier: GPL-2.0 +================= +ACPI Debug Output +================= The ACPI CA, the Linux ACPI core, and some ACPI drivers can generate debug output. This document describes how to use this facility. Compile-time configuration --------------------------- +========================== ACPI debug output is globally enabled by CONFIG_ACPI_DEBUG. If this config option is turned off, the debug messages are not even built into the kernel. Boot- and run-time configuration --------------------------------- +================================ When CONFIG_ACPI_DEBUG=y, you can select the component and level of messages you're interested in. At boot-time, use the acpi.debug_layer and @@ -21,7 +24,7 @@ debug_layer and debug_level files in /sys/module/acpi/parameters/ to control the debug messages. debug_layer (component) ------------------------ +======================= The "debug_layer" is a mask that selects components of interest, e.g., a specific driver or part of the ACPI interpreter. To build the debug_layer @@ -33,7 +36,7 @@ to /sys/module/acpi/parameters/debug_layer. The possible components are defined in include/acpi/acoutput.h and include/acpi/acpi_drivers.h. Reading /sys/module/acpi/parameters/debug_layer -shows the supported mask values, currently these: +shows the supported mask values, currently these:: ACPI_UTILITIES 0x00000001 ACPI_HARDWARE 0x00000002 @@ -65,7 +68,7 @@ shows the supported mask values, currently these: ACPI_PROCESSOR_COMPONENT 0x20000000 debug_level ------------ +=========== The "debug_level" is a mask that selects different types of messages, e.g., those related to initialization, method execution, informational messages, etc. @@ -81,7 +84,7 @@ to /sys/module/acpi/parameters/debug_level. The possible levels are defined in include/acpi/acoutput.h. Reading /sys/module/acpi/parameters/debug_level shows the supported mask values, -currently these: +currently these:: ACPI_LV_INIT 0x00000001 ACPI_LV_DEBUG_OBJECT 0x00000002 @@ -113,9 +116,9 @@ currently these: ACPI_LV_EVENTS 0x80000000 Examples --------- +======== -For example, drivers/acpi/bus.c contains this: +For example, drivers/acpi/bus.c contains this:: #define _COMPONENT ACPI_BUS_COMPONENT ... @@ -127,22 +130,22 @@ statement uses ACPI_DB_INFO, which is macro based on the ACPI_LV_INFO definition.) Enable all AML "Debug" output (stores to the Debug object while interpreting -AML) during boot: +AML) during boot:: acpi.debug_layer=0xffffffff acpi.debug_level=0x2 -Enable PCI and PCI interrupt routing debug messages: +Enable PCI and PCI interrupt routing debug messages:: acpi.debug_layer=0x400000 acpi.debug_level=0x4 -Enable all ACPI hardware-related messages: +Enable all ACPI hardware-related messages:: acpi.debug_layer=0x2 acpi.debug_level=0xffffffff -Enable all ACPI_DB_INFO messages after boot: +Enable all ACPI_DB_INFO messages after boot:: # echo 0x4 > /sys/module/acpi/parameters/debug_level -Show all valid component values: +Show all valid component values:: # cat /sys/module/acpi/parameters/debug_layer diff --git a/Documentation/acpi/dsd/data-node-references.txt b/Documentation/firmware-guide/acpi/dsd/data-node-references.rst index c3871565c8cf..1351984e767c 100644 --- a/Documentation/acpi/dsd/data-node-references.txt +++ b/Documentation/firmware-guide/acpi/dsd/data-node-references.rst @@ -1,9 +1,12 @@ -Copyright (C) 2018 Intel Corporation -Author: Sakari Ailus <sakari.ailus@linux.intel.com> - +.. SPDX-License-Identifier: GPL-2.0 +.. include:: <isonum.txt> +=================================== Referencing hierarchical data nodes ------------------------------------ +=================================== + +:Copyright: |copy| 2018 Intel Corporation +:Author: Sakari Ailus <sakari.ailus@linux.intel.com> ACPI in general allows referring to device objects in the tree only. Hierarchical data extension nodes may not be referred to directly, hence this @@ -28,13 +31,14 @@ extension key. Example -------- +======= - In the ASL snippet below, the "reference" _DSD property [2] contains a - device object reference to DEV0 and under that device object, a - hierarchical data extension key "node@1" referring to the NOD1 object - and lastly, a hierarchical data extension key "anothernode" referring to - the ANOD object which is also the final target node of the reference. +In the ASL snippet below, the "reference" _DSD property [2] contains a +device object reference to DEV0 and under that device object, a +hierarchical data extension key "node@1" referring to the NOD1 object +and lastly, a hierarchical data extension key "anothernode" referring to +the ANOD object which is also the final target node of the reference. +:: Device (DEV0) { @@ -75,15 +79,15 @@ Example }) } -Please also see a graph example in graph.txt . +Please also see a graph example in :doc:`graph`. References ----------- +========== [1] Hierarchical Data Extension UUID For _DSD. - <URL:http://www.uefi.org/sites/default/files/resources/_DSD-hierarchical-data-extension-UUID-v1.1.pdf>, - referenced 2018-07-17. +<http://www.uefi.org/sites/default/files/resources/_DSD-hierarchical-data-extension-UUID-v1.1.pdf>, +referenced 2018-07-17. [2] Device Properties UUID For _DSD. - <URL:http://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf>, - referenced 2016-10-04. +<http://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf>, +referenced 2016-10-04. diff --git a/Documentation/acpi/dsd/graph.txt b/Documentation/firmware-guide/acpi/dsd/graph.rst index b9ce910781dc..e0baed35b037 100644 --- a/Documentation/acpi/dsd/graph.txt +++ b/Documentation/firmware-guide/acpi/dsd/graph.rst @@ -1,8 +1,11 @@ -Graphs +.. SPDX-License-Identifier: GPL-2.0 +====== +Graphs +====== _DSD ----- +==== _DSD (Device Specific Data) [7] is a predefined ACPI device configuration object that can be used to convey information on @@ -30,7 +33,7 @@ hierarchical data extension array on each depth. Ports and endpoints -------------------- +=================== The port and endpoint concepts are very similar to those in Devicetree [3]. A port represents an interface in a device, and an endpoint @@ -38,9 +41,9 @@ represents a connection to that interface. All port nodes are located under the device's "_DSD" node in the hierarchical data extension tree. The data extension related to each port node must begin -with "port" and must be followed by the "@" character and the number of the port -as its key. The target object it refers to should be called "PRTX", where "X" is -the number of the port. An example of such a package would be: +with "port" and must be followed by the "@" character and the number of the +port as its key. The target object it refers to should be called "PRTX", where +"X" is the number of the port. An example of such a package would be:: Package() { "port@4", PRT4 } @@ -49,7 +52,7 @@ data extension key of the endpoint nodes must begin with "endpoint" and must be followed by the "@" character and the number of the endpoint. The object it refers to should be called "EPXY", where "X" is the number of the port and "Y" is the number of the endpoint. An example of such a -package would be: +package would be:: Package() { "endpoint@0", EP40 } @@ -62,85 +65,85 @@ of that port shall be zero. Similarly, if a port may only have a single endpoint, the number of that endpoint shall be zero. The endpoint reference uses property extension with "remote-endpoint" property -name followed by a reference in the same package. Such references consist of the +name followed by a reference in the same package. Such references consist of the remote device reference, the first package entry of the port data extension reference under the device and finally the first package entry of the endpoint -data extension reference under the port. Individual references thus appear as: +data extension reference under the port. Individual references thus appear as:: Package() { device, "port@X", "endpoint@Y" } -In the above example, "X" is the number of the port and "Y" is the number of the -endpoint. +In the above example, "X" is the number of the port and "Y" is the number of +the endpoint. The references to endpoints must be always done both ways, to the remote endpoint and back from the referred remote endpoint node. -A simple example of this is show below: +A simple example of this is show below:: Scope (\_SB.PCI0.I2C2) { - Device (CAM0) - { - Name (_DSD, Package () { - ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), - Package () { - Package () { "compatible", Package () { "nokia,smia" } }, - }, - ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), - Package () { - Package () { "port@0", PRT0 }, - } - }) - Name (PRT0, Package() { - ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), - Package () { - Package () { "reg", 0 }, - }, - ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), - Package () { - Package () { "endpoint@0", EP00 }, - } - }) - Name (EP00, Package() { - ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), - Package () { - Package () { "reg", 0 }, - Package () { "remote-endpoint", Package() { \_SB.PCI0.ISP, "port@4", "endpoint@0" } }, - } - }) - } + Device (CAM0) + { + Name (_DSD, Package () { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package () { + Package () { "compatible", Package () { "nokia,smia" } }, + }, + ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), + Package () { + Package () { "port@0", PRT0 }, + } + }) + Name (PRT0, Package() { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package () { + Package () { "reg", 0 }, + }, + ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), + Package () { + Package () { "endpoint@0", EP00 }, + } + }) + Name (EP00, Package() { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package () { + Package () { "reg", 0 }, + Package () { "remote-endpoint", Package() { \_SB.PCI0.ISP, "port@4", "endpoint@0" } }, + } + }) + } } Scope (\_SB.PCI0) { - Device (ISP) - { - Name (_DSD, Package () { - ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), - Package () { - Package () { "port@4", PRT4 }, - } - }) - - Name (PRT4, Package() { - ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), - Package () { - Package () { "reg", 4 }, /* CSI-2 port number */ - }, - ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), - Package () { - Package () { "endpoint@0", EP40 }, - } - }) - - Name (EP40, Package() { - ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), - Package () { - Package () { "reg", 0 }, - Package () { "remote-endpoint", Package () { \_SB.PCI0.I2C2.CAM0, "port@0", "endpoint@0" } }, - } - }) - } + Device (ISP) + { + Name (_DSD, Package () { + ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), + Package () { + Package () { "port@4", PRT4 }, + } + }) + + Name (PRT4, Package() { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package () { + Package () { "reg", 4 }, /* CSI-2 port number */ + }, + ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b"), + Package () { + Package () { "endpoint@0", EP40 }, + } + }) + + Name (EP40, Package() { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package () { + Package () { "reg", 0 }, + Package () { "remote-endpoint", Package () { \_SB.PCI0.I2C2.CAM0, "port@0", "endpoint@0" } }, + } + }) + } } Here, the port 0 of the "CAM0" device is connected to the port 4 of @@ -148,27 +151,27 @@ the "ISP" device and vice versa. References ----------- +========== [1] _DSD (Device Specific Data) Implementation Guide. - <URL:http://www.uefi.org/sites/default/files/resources/_DSD-implementation-guide-toplevel-1_1.htm>, + http://www.uefi.org/sites/default/files/resources/_DSD-implementation-guide-toplevel-1_1.htm, referenced 2016-10-03. -[2] Devicetree. <URL:http://www.devicetree.org>, referenced 2016-10-03. +[2] Devicetree. http://www.devicetree.org, referenced 2016-10-03. [3] Documentation/devicetree/bindings/graph.txt [4] Device Properties UUID For _DSD. - <URL:http://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf>, + http://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf, referenced 2016-10-04. [5] Hierarchical Data Extension UUID For _DSD. - <URL:http://www.uefi.org/sites/default/files/resources/_DSD-hierarchical-data-extension-UUID-v1.1.pdf>, + http://www.uefi.org/sites/default/files/resources/_DSD-hierarchical-data-extension-UUID-v1.1.pdf, referenced 2016-10-04. [6] Advanced Configuration and Power Interface Specification. - <URL:http://www.uefi.org/sites/default/files/resources/ACPI_6_1.pdf>, + http://www.uefi.org/sites/default/files/resources/ACPI_6_1.pdf, referenced 2016-10-04. [7] _DSD Device Properties Usage Rules. - Documentation/acpi/DSD-properties-rules.txt + :doc:`../DSD-properties-rules` diff --git a/Documentation/acpi/enumeration.txt b/Documentation/firmware-guide/acpi/enumeration.rst index 7bcf9c3d9fbe..6b32b7be8c85 100644 --- a/Documentation/acpi/enumeration.txt +++ b/Documentation/firmware-guide/acpi/enumeration.rst @@ -1,5 +1,9 @@ -ACPI based device enumeration -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +.. SPDX-License-Identifier: GPL-2.0 + +============================= +ACPI Based Device Enumeration +============================= + ACPI 5 introduced a set of new resources (UartTSerialBus, I2cSerialBus, SpiSerialBus, GpioIo and GpioInt) which can be used in enumerating slave devices behind serial bus controllers. @@ -11,12 +15,12 @@ that are accessed through memory-mapped registers. In order to support this and re-use the existing drivers as much as possible we decided to do following: - o Devices that have no bus connector resource are represented as - platform devices. + - Devices that have no bus connector resource are represented as + platform devices. - o Devices behind real busses where there is a connector resource - are represented as struct spi_device or struct i2c_device - (standard UARTs are not busses so there is no struct uart_device). + - Devices behind real busses where there is a connector resource + are represented as struct spi_device or struct i2c_device + (standard UARTs are not busses so there is no struct uart_device). As both ACPI and Device Tree represent a tree of devices (and their resources) this implementation follows the Device Tree way as much as @@ -31,7 +35,8 @@ enumerated from ACPI namespace. This handle can be used to extract other device-specific configuration. There is an example of this below. Platform bus support -~~~~~~~~~~~~~~~~~~~~ +==================== + Since we are using platform devices to represent devices that are not connected to any physical bus we only need to implement a platform driver for the device and add supported ACPI IDs. If this same IP-block is used on @@ -39,7 +44,7 @@ some other non-ACPI platform, the driver might work out of the box or needs some minor changes. Adding ACPI support for an existing driver should be pretty -straightforward. Here is the simplest example: +straightforward. Here is the simplest example:: #ifdef CONFIG_ACPI static const struct acpi_device_id mydrv_acpi_match[] = { @@ -61,12 +66,13 @@ configuring GPIOs it can get its ACPI handle and extract this information from ACPI tables. DMA support -~~~~~~~~~~~ +=========== + DMA controllers enumerated via ACPI should be registered in the system to provide generic access to their resources. For example, a driver that would like to be accessible to slave devices via generic API call dma_request_slave_channel() must register itself at the end of the probe -function like this: +function like this:: err = devm_acpi_dma_controller_register(dev, xlate_func, dw); /* Handle the error if it's not a case of !CONFIG_ACPI */ @@ -74,7 +80,7 @@ function like this: and implement custom xlate function if needed (usually acpi_dma_simple_xlate() is enough) which converts the FixedDMA resource provided by struct acpi_dma_spec into the corresponding DMA channel. A piece of code for that case -could look like: +could look like:: #ifdef CONFIG_ACPI struct filter_args { @@ -114,7 +120,7 @@ provided by struct acpi_dma. Clients must call dma_request_slave_channel() with the string parameter that corresponds to a specific FixedDMA resource. By default "tx" means the first entry of the FixedDMA resource array, "rx" means the second entry. The table -below shows a layout: +below shows a layout:: Device (I2C0) { @@ -138,12 +144,13 @@ acpi_dma_request_slave_chan_by_index() directly and therefore choose the specific FixedDMA resource by its index. SPI serial bus support -~~~~~~~~~~~~~~~~~~~~~~ +====================== + Slave devices behind SPI bus have SpiSerialBus resource attached to them. This is extracted automatically by the SPI core and the slave devices are enumerated once spi_register_master() is called by the bus driver. -Here is what the ACPI namespace for a SPI slave might look like: +Here is what the ACPI namespace for a SPI slave might look like:: Device (EEP0) { @@ -163,7 +170,7 @@ Here is what the ACPI namespace for a SPI slave might look like: The SPI device drivers only need to add ACPI IDs in a similar way than with the platform device drivers. Below is an example where we add ACPI support -to at25 SPI eeprom driver (this is meant for the above ACPI snippet): +to at25 SPI eeprom driver (this is meant for the above ACPI snippet):: #ifdef CONFIG_ACPI static const struct acpi_device_id at25_acpi_match[] = { @@ -182,7 +189,7 @@ to at25 SPI eeprom driver (this is meant for the above ACPI snippet): Note that this driver actually needs more information like page size of the eeprom etc. but at the time writing this there is no standard way of -passing those. One idea is to return this in _DSM method like: +passing those. One idea is to return this in _DSM method like:: Device (EEP0) { @@ -202,7 +209,7 @@ passing those. One idea is to return this in _DSM method like: } Then the at25 SPI driver can get this configuration by calling _DSM on its -ACPI handle like: +ACPI handle like:: struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; struct acpi_object_list input; @@ -220,14 +227,15 @@ ACPI handle like: kfree(output.pointer); I2C serial bus support -~~~~~~~~~~~~~~~~~~~~~~ +====================== + The slaves behind I2C bus controller only need to add the ACPI IDs like with the platform and SPI drivers. The I2C core automatically enumerates any slave devices behind the controller device once the adapter is registered. Below is an example of how to add ACPI support to the existing mpu3050 -input driver: +input driver:: #ifdef CONFIG_ACPI static const struct acpi_device_id mpu3050_acpi_match[] = { @@ -251,56 +259,57 @@ input driver: }; GPIO support -~~~~~~~~~~~~ +============ + ACPI 5 introduced two new resources to describe GPIO connections: GpioIo and GpioInt. These resources can be used to pass GPIO numbers used by the device to the driver. ACPI 5.1 extended this with _DSD (Device Specific Data) which made it possible to name the GPIOs among other things. -For example: +For example:: -Device (DEV) -{ - Method (_CRS, 0, NotSerialized) + Device (DEV) { - Name (SBUF, ResourceTemplate() + Method (_CRS, 0, NotSerialized) { - ... - // Used to power on/off the device - GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, - IoRestrictionOutputOnly, "\\_SB.PCI0.GPI0", - 0x00, ResourceConsumer,,) + Name (SBUF, ResourceTemplate() { - // Pin List - 0x0055 - } + ... + // Used to power on/off the device + GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, + IoRestrictionOutputOnly, "\\_SB.PCI0.GPI0", + 0x00, ResourceConsumer,,) + { + // Pin List + 0x0055 + } + + // Interrupt for the device + GpioInt (Edge, ActiveHigh, ExclusiveAndWake, PullNone, + 0x0000, "\\_SB.PCI0.GPI0", 0x00, ResourceConsumer,,) + { + // Pin list + 0x0058 + } + + ... - // Interrupt for the device - GpioInt (Edge, ActiveHigh, ExclusiveAndWake, PullNone, - 0x0000, "\\_SB.PCI0.GPI0", 0x00, ResourceConsumer,,) - { - // Pin list - 0x0058 } - ... - + Return (SBUF) } - Return (SBUF) - } - - // ACPI 5.1 _DSD used for naming the GPIOs - Name (_DSD, Package () - { - ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), - Package () + // ACPI 5.1 _DSD used for naming the GPIOs + Name (_DSD, Package () { - Package () {"power-gpios", Package() {^DEV, 0, 0, 0 }}, - Package () {"irq-gpios", Package() {^DEV, 1, 0, 0 }}, - } - }) - ... + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package () + { + Package () {"power-gpios", Package() {^DEV, 0, 0, 0 }}, + Package () {"irq-gpios", Package() {^DEV, 1, 0, 0 }}, + } + }) + ... These GPIO numbers are controller relative and path "\\_SB.PCI0.GPI0" specifies the path to the controller. In order to use these GPIOs in Linux @@ -310,7 +319,7 @@ There is a standard GPIO API for that and is documented in Documentation/gpio/. In the above example we can get the corresponding two GPIO descriptors with -a code like this: +a code like this:: #include <linux/gpio/consumer.h> ... @@ -334,21 +343,22 @@ See Documentation/acpi/gpio-properties.txt for more information about the _DSD binding related to GPIOs. MFD devices -~~~~~~~~~~~ +=========== + The MFD devices register their children as platform devices. For the child devices there needs to be an ACPI handle that they can use to reference parts of the ACPI namespace that relate to them. In the Linux MFD subsystem we provide two ways: - o The children share the parent ACPI handle. - o The MFD cell can specify the ACPI id of the device. + - The children share the parent ACPI handle. + - The MFD cell can specify the ACPI id of the device. For the first case, the MFD drivers do not need to do anything. The resulting child platform device will have its ACPI_COMPANION() set to point to the parent device. If the ACPI namespace has a device that we can match using an ACPI id or ACPI -adr, the cell should be set like: +adr, the cell should be set like:: static struct mfd_cell_acpi_match my_subdevice_cell_acpi_match = { .pnpid = "XYZ0001", @@ -366,7 +376,8 @@ the MFD device and if found, that ACPI companion device is bound to the resulting child platform device. Device Tree namespace link device ID -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +==================================== + The Device Tree protocol uses device identification based on the "compatible" property whose value is a string or an array of strings recognized as device identifiers by drivers and the driver core. The set of all those strings may be @@ -410,6 +421,32 @@ Specifically, the device IDs returned by _HID and preceding PRP0001 in the _CID return package will be checked first. Also in that case the bus type the device will be enumerated to depends on the device ID returned by _HID. +For example, the following ACPI sample might be used to enumerate an lm75-type +I2C temperature sensor and match it to the driver using the Device Tree +namespace link: + + Device (TMP0) + { + Name (_HID, "PRP0001") + Name (_DSD, Package() { + ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), + Package () { + Package (2) { "compatible", "ti,tmp75" }, + } + }) + Method (_CRS, 0, Serialized) + { + Name (SBUF, ResourceTemplate () + { + I2cSerialBusV2 (0x48, ControllerInitiated, + 400000, AddressingMode7Bit, + "\\_SB.PCI0.I2C1", 0x00, + ResourceConsumer, , Exclusive,) + }) + Return (SBUF) + } + } + It is valid to define device objects with a _HID returning PRP0001 and without the "compatible" property in the _DSD or a _CID as long as one of their ancestors provides a _DSD with a valid "compatible" property. Such device @@ -423,4 +460,4 @@ the _DSD of the device object itself or the _DSD of its ancestor in the Otherwise, the _DSD itself is regarded as invalid and therefore the "compatible" property returned by it is meaningless. -Refer to DSD-properties-rules.txt for more information. +Refer to :doc:`DSD-properties-rules` for more information. diff --git a/Documentation/acpi/gpio-properties.txt b/Documentation/firmware-guide/acpi/gpio-properties.rst index 88c65cb5bf0a..bb6d74f23ee0 100644 --- a/Documentation/acpi/gpio-properties.txt +++ b/Documentation/firmware-guide/acpi/gpio-properties.rst @@ -1,5 +1,8 @@ +.. SPDX-License-Identifier: GPL-2.0 + +====================================== _DSD Device Properties Related to GPIO --------------------------------------- +====================================== With the release of ACPI 5.1, the _DSD configuration object finally allows names to be given to GPIOs (and other things as well) returned @@ -8,7 +11,7 @@ the corresponding GPIO, which is pretty error prone (it depends on the _CRS output ordering, for example). With _DSD we can now query GPIOs using a name instead of an integer -index, like the ASL example below shows: +index, like the ASL example below shows:: // Bluetooth device with reset and shutdown GPIOs Device (BTH) @@ -34,15 +37,19 @@ index, like the ASL example below shows: }) } -The format of the supported GPIO property is: +The format of the supported GPIO property is:: Package () { "name", Package () { ref, index, pin, active_low }} - ref - The device that has _CRS containing GpioIo()/GpioInt() resources, - typically this is the device itself (BTH in our case). - index - Index of the GpioIo()/GpioInt() resource in _CRS starting from zero. - pin - Pin in the GpioIo()/GpioInt() resource. Typically this is zero. - active_low - If 1 the GPIO is marked as active_low. +ref + The device that has _CRS containing GpioIo()/GpioInt() resources, + typically this is the device itself (BTH in our case). +index + Index of the GpioIo()/GpioInt() resource in _CRS starting from zero. +pin + Pin in the GpioIo()/GpioInt() resource. Typically this is zero. +active_low + If 1 the GPIO is marked as active_low. Since ACPI GpioIo() resource does not have a field saying whether it is active low or high, the "active_low" argument can be used here. Setting @@ -55,7 +62,7 @@ It is possible to leave holes in the array of GPIOs. This is useful in cases like with SPI host controllers where some chip selects may be implemented as GPIOs and some as native signals. For example a SPI host controller can have chip selects 0 and 2 implemented as GPIOs and 1 as -native: +native:: Package () { "cs-gpios", @@ -67,7 +74,7 @@ native: } Other supported properties --------------------------- +========================== Following Device Tree compatible device properties are also supported by _DSD device properties for GPIO controllers: @@ -78,7 +85,7 @@ _DSD device properties for GPIO controllers: - input - line-name -Example: +Example:: Name (_DSD, Package () { // _DSD Hierarchical Properties Extension UUID @@ -100,7 +107,7 @@ Example: - gpio-line-names -Example: +Example:: Package () { "gpio-line-names", @@ -114,7 +121,7 @@ See Documentation/devicetree/bindings/gpio/gpio.txt for more information about these properties. ACPI GPIO Mappings Provided by Drivers --------------------------------------- +====================================== There are systems in which the ACPI tables do not contain _DSD but provide _CRS with GpioIo()/GpioInt() resources and device drivers still need to work with @@ -139,16 +146,16 @@ line in that resource starting from zero, and the active-low flag for that line, respectively, in analogy with the _DSD GPIO property format specified above. For the example Bluetooth device discussed previously the data structures in -question would look like this: +question would look like this:: -static const struct acpi_gpio_params reset_gpio = { 1, 1, false }; -static const struct acpi_gpio_params shutdown_gpio = { 0, 0, false }; + static const struct acpi_gpio_params reset_gpio = { 1, 1, false }; + static const struct acpi_gpio_params shutdown_gpio = { 0, 0, false }; -static const struct acpi_gpio_mapping bluetooth_acpi_gpios[] = { - { "reset-gpios", &reset_gpio, 1 }, - { "shutdown-gpios", &shutdown_gpio, 1 }, - { }, -}; + static const struct acpi_gpio_mapping bluetooth_acpi_gpios[] = { + { "reset-gpios", &reset_gpio, 1 }, + { "shutdown-gpios", &shutdown_gpio, 1 }, + { }, + }; Next, the mapping table needs to be passed as the second argument to acpi_dev_add_driver_gpios() that will register it with the ACPI device object @@ -158,12 +165,12 @@ calling acpi_dev_remove_driver_gpios() on the ACPI device object where that table was previously registered. Using the _CRS fallback ------------------------ +======================= If a device does not have _DSD or the driver does not create ACPI GPIO mapping, the Linux GPIO framework refuses to return any GPIOs. This is because the driver does not know what it actually gets. For example if we -have a device like below: +have a device like below:: Device (BTH) { @@ -177,7 +184,7 @@ have a device like below: }) } -The driver might expect to get the right GPIO when it does: +The driver might expect to get the right GPIO when it does:: desc = gpiod_get(dev, "reset", GPIOD_OUT_LOW); @@ -193,22 +200,25 @@ the ACPI GPIO mapping tables are hardly linked to ACPI ID and certain objects, as listed in the above chapter, of the device in question. Getting GPIO descriptor ------------------------ +======================= + +There are two main approaches to get GPIO resource from ACPI:: -There are two main approaches to get GPIO resource from ACPI: - desc = gpiod_get(dev, connection_id, flags); - desc = gpiod_get_index(dev, connection_id, index, flags); + desc = gpiod_get(dev, connection_id, flags); + desc = gpiod_get_index(dev, connection_id, index, flags); We may consider two different cases here, i.e. when connection ID is provided and otherwise. -Case 1: - desc = gpiod_get(dev, "non-null-connection-id", flags); - desc = gpiod_get_index(dev, "non-null-connection-id", index, flags); +Case 1:: + + desc = gpiod_get(dev, "non-null-connection-id", flags); + desc = gpiod_get_index(dev, "non-null-connection-id", index, flags); + +Case 2:: -Case 2: - desc = gpiod_get(dev, NULL, flags); - desc = gpiod_get_index(dev, NULL, index, flags); + desc = gpiod_get(dev, NULL, flags); + desc = gpiod_get_index(dev, NULL, index, flags); Case 1 assumes that corresponding ACPI device description must have defined device properties and will prevent to getting any GPIO resources diff --git a/Documentation/firmware-guide/acpi/i2c-muxes.rst b/Documentation/firmware-guide/acpi/i2c-muxes.rst new file mode 100644 index 000000000000..3a8997ccd7c4 --- /dev/null +++ b/Documentation/firmware-guide/acpi/i2c-muxes.rst @@ -0,0 +1,61 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============== +ACPI I2C Muxes +============== + +Describing an I2C device hierarchy that includes I2C muxes requires an ACPI +Device () scope per mux channel. + +Consider this topology:: + + +------+ +------+ + | SMB1 |-->| MUX0 |--CH00--> i2c client A (0x50) + | | | 0x70 |--CH01--> i2c client B (0x50) + +------+ +------+ + +which corresponds to the following ASL:: + + Device (SMB1) + { + Name (_HID, ...) + Device (MUX0) + { + Name (_HID, ...) + Name (_CRS, ResourceTemplate () { + I2cSerialBus (0x70, ControllerInitiated, I2C_SPEED, + AddressingMode7Bit, "^SMB1", 0x00, + ResourceConsumer,,) + } + + Device (CH00) + { + Name (_ADR, 0) + + Device (CLIA) + { + Name (_HID, ...) + Name (_CRS, ResourceTemplate () { + I2cSerialBus (0x50, ControllerInitiated, I2C_SPEED, + AddressingMode7Bit, "^CH00", 0x00, + ResourceConsumer,,) + } + } + } + + Device (CH01) + { + Name (_ADR, 1) + + Device (CLIB) + { + Name (_HID, ...) + Name (_CRS, ResourceTemplate () { + I2cSerialBus (0x50, ControllerInitiated, I2C_SPEED, + AddressingMode7Bit, "^CH01", 0x00, + ResourceConsumer,,) + } + } + } + } + } diff --git a/Documentation/firmware-guide/acpi/index.rst b/Documentation/firmware-guide/acpi/index.rst new file mode 100644 index 000000000000..ae609eec4679 --- /dev/null +++ b/Documentation/firmware-guide/acpi/index.rst @@ -0,0 +1,26 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============ +ACPI Support +============ + +.. toctree:: + :maxdepth: 1 + + namespace + dsd/graph + dsd/data-node-references + enumeration + osi + method-customizing + method-tracing + DSD-properties-rules + debug + aml-debugger + apei/output_format + apei/einj + gpio-properties + i2c-muxes + acpi-lid + lpit + video_extension diff --git a/Documentation/acpi/lpit.txt b/Documentation/firmware-guide/acpi/lpit.rst index b426398d2e97..aca928fab027 100644 --- a/Documentation/acpi/lpit.txt +++ b/Documentation/firmware-guide/acpi/lpit.rst @@ -1,3 +1,9 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=========================== +Low Power Idle Table (LPIT) +=========================== + To enumerate platform Low Power Idle states, Intel platforms are using “Low Power Idle Table” (LPIT). More details about this table can be downloaded from: @@ -8,13 +14,15 @@ Residencies for each low power state can be read via FFH On platforms supporting S0ix sleep states, there can be two types of residencies: -- CPU PKG C10 (Read via FFH interface) -- Platform Controller Hub (PCH) SLP_S0 (Read via memory mapped interface) + + - CPU PKG C10 (Read via FFH interface) + - Platform Controller Hub (PCH) SLP_S0 (Read via memory mapped interface) The following attributes are added dynamically to the cpuidle -sysfs attribute group: - /sys/devices/system/cpu/cpuidle/low_power_idle_cpu_residency_us - /sys/devices/system/cpu/cpuidle/low_power_idle_system_residency_us +sysfs attribute group:: + + /sys/devices/system/cpu/cpuidle/low_power_idle_cpu_residency_us + /sys/devices/system/cpu/cpuidle/low_power_idle_system_residency_us The "low_power_idle_cpu_residency_us" attribute shows time spent by the CPU package in PKG C10 diff --git a/Documentation/firmware-guide/acpi/method-customizing.rst b/Documentation/firmware-guide/acpi/method-customizing.rst new file mode 100644 index 000000000000..de3ebcaed4cf --- /dev/null +++ b/Documentation/firmware-guide/acpi/method-customizing.rst @@ -0,0 +1,89 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================================= +Linux ACPI Custom Control Method How To +======================================= + +:Author: Zhang Rui <rui.zhang@intel.com> + + +Linux supports customizing ACPI control methods at runtime. + +Users can use this to: + +1. override an existing method which may not work correctly, + or just for debugging purposes. +2. insert a completely new method in order to create a missing + method such as _OFF, _ON, _STA, _INI, etc. + +For these cases, it is far simpler to dynamically install a single +control method rather than override the entire DSDT, because kernel +rebuild/reboot is not needed and test result can be got in minutes. + +.. note:: + + - Only ACPI METHOD can be overridden, any other object types like + "Device", "OperationRegion", are not recognized. Methods + declared inside scope operators are also not supported. + + - The same ACPI control method can be overridden for many times, + and it's always the latest one that used by Linux/kernel. + + - To get the ACPI debug object output (Store (AAAA, Debug)), + please run:: + + echo 1 > /sys/module/acpi/parameters/aml_debug_output + + +1. override an existing method +============================== +a) get the ACPI table via ACPI sysfs I/F. e.g. to get the DSDT, + just run "cat /sys/firmware/acpi/tables/DSDT > /tmp/dsdt.dat" +b) disassemble the table by running "iasl -d dsdt.dat". +c) rewrite the ASL code of the method and save it in a new file, +d) package the new file (psr.asl) to an ACPI table format. + Here is an example of a customized \_SB._AC._PSR method:: + + DefinitionBlock ("", "SSDT", 1, "", "", 0x20080715) + { + Method (\_SB_.AC._PSR, 0, NotSerialized) + { + Store ("In AC _PSR", Debug) + Return (ACON) + } + } + + Note that the full pathname of the method in ACPI namespace + should be used. +e) assemble the file to generate the AML code of the method. + e.g. "iasl -vw 6084 psr.asl" (psr.aml is generated as a result) + If parameter "-vw 6084" is not supported by your iASL compiler, + please try a newer version. +f) mount debugfs by "mount -t debugfs none /sys/kernel/debug" +g) override the old method via the debugfs by running + "cat /tmp/psr.aml > /sys/kernel/debug/acpi/custom_method" + +2. insert a new method +====================== +This is easier than overriding an existing method. +We just need to create the ASL code of the method we want to +insert and then follow the step c) ~ g) in section 1. + +3. undo your changes +==================== +The "undo" operation is not supported for a new inserted method +right now, i.e. we can not remove a method currently. +For an overridden method, in order to undo your changes, please +save a copy of the method original ASL code in step c) section 1, +and redo step c) ~ g) to override the method with the original one. + + +.. note:: We can use a kernel with multiple custom ACPI method running, + But each individual write to debugfs can implement a SINGLE + method override. i.e. if we want to insert/override multiple + ACPI methods, we need to redo step c) ~ g) for multiple times. + +.. note:: Be aware that root can mis-use this driver to modify arbitrary + memory and gain additional rights, if root's privileges got + restricted (for example if root is not allowed to load additional + modules after boot). diff --git a/Documentation/firmware-guide/acpi/method-tracing.rst b/Documentation/firmware-guide/acpi/method-tracing.rst new file mode 100644 index 000000000000..d0b077b73f5f --- /dev/null +++ b/Documentation/firmware-guide/acpi/method-tracing.rst @@ -0,0 +1,238 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: <isonum.txt> + +===================== +ACPICA Trace Facility +===================== + +:Copyright: |copy| 2015, Intel Corporation +:Author: Lv Zheng <lv.zheng@intel.com> + + +Abstract +======== +This document describes the functions and the interfaces of the +method tracing facility. + +Functionalities and usage examples +================================== + +ACPICA provides method tracing capability. And two functions are +currently implemented using this capability. + +Log reducer +----------- + +ACPICA subsystem provides debugging outputs when CONFIG_ACPI_DEBUG is +enabled. The debugging messages which are deployed via +ACPI_DEBUG_PRINT() macro can be reduced at 2 levels - per-component +level (known as debug layer, configured via +/sys/module/acpi/parameters/debug_layer) and per-type level (known as +debug level, configured via /sys/module/acpi/parameters/debug_level). + +But when the particular layer/level is applied to the control method +evaluations, the quantity of the debugging outputs may still be too +large to be put into the kernel log buffer. The idea thus is worked out +to only enable the particular debug layer/level (normally more detailed) +logs when the control method evaluation is started, and disable the +detailed logging when the control method evaluation is stopped. + +The following command examples illustrate the usage of the "log reducer" +functionality: + +a. Filter out the debug layer/level matched logs when control methods + are being evaluated:: + + # cd /sys/module/acpi/parameters + # echo "0xXXXXXXXX" > trace_debug_layer + # echo "0xYYYYYYYY" > trace_debug_level + # echo "enable" > trace_state + +b. Filter out the debug layer/level matched logs when the specified + control method is being evaluated:: + + # cd /sys/module/acpi/parameters + # echo "0xXXXXXXXX" > trace_debug_layer + # echo "0xYYYYYYYY" > trace_debug_level + # echo "\PPPP.AAAA.TTTT.HHHH" > trace_method_name + # echo "method" > /sys/module/acpi/parameters/trace_state + +c. Filter out the debug layer/level matched logs when the specified + control method is being evaluated for the first time:: + + # cd /sys/module/acpi/parameters + # echo "0xXXXXXXXX" > trace_debug_layer + # echo "0xYYYYYYYY" > trace_debug_level + # echo "\PPPP.AAAA.TTTT.HHHH" > trace_method_name + # echo "method-once" > /sys/module/acpi/parameters/trace_state + +Where: + 0xXXXXXXXX/0xYYYYYYYY + Refer to Documentation/acpi/debug.txt for possible debug layer/level + masking values. + \PPPP.AAAA.TTTT.HHHH + Full path of a control method that can be found in the ACPI namespace. + It needn't be an entry of a control method evaluation. + +AML tracer +---------- + +There are special log entries added by the method tracing facility at +the "trace points" the AML interpreter starts/stops to execute a control +method, or an AML opcode. Note that the format of the log entries are +subject to change:: + + [ 0.186427] exdebug-0398 ex_trace_point : Method Begin [0xf58394d8:\_SB.PCI0.LPCB.ECOK] execution. + [ 0.186630] exdebug-0398 ex_trace_point : Opcode Begin [0xf5905c88:If] execution. + [ 0.186820] exdebug-0398 ex_trace_point : Opcode Begin [0xf5905cc0:LEqual] execution. + [ 0.187010] exdebug-0398 ex_trace_point : Opcode Begin [0xf5905a20:-NamePath-] execution. + [ 0.187214] exdebug-0398 ex_trace_point : Opcode End [0xf5905a20:-NamePath-] execution. + [ 0.187407] exdebug-0398 ex_trace_point : Opcode Begin [0xf5905f60:One] execution. + [ 0.187594] exdebug-0398 ex_trace_point : Opcode End [0xf5905f60:One] execution. + [ 0.187789] exdebug-0398 ex_trace_point : Opcode End [0xf5905cc0:LEqual] execution. + [ 0.187980] exdebug-0398 ex_trace_point : Opcode Begin [0xf5905cc0:Return] execution. + [ 0.188146] exdebug-0398 ex_trace_point : Opcode Begin [0xf5905f60:One] execution. + [ 0.188334] exdebug-0398 ex_trace_point : Opcode End [0xf5905f60:One] execution. + [ 0.188524] exdebug-0398 ex_trace_point : Opcode End [0xf5905cc0:Return] execution. + [ 0.188712] exdebug-0398 ex_trace_point : Opcode End [0xf5905c88:If] execution. + [ 0.188903] exdebug-0398 ex_trace_point : Method End [0xf58394d8:\_SB.PCI0.LPCB.ECOK] execution. + +Developers can utilize these special log entries to track the AML +interpretion, thus can aid issue debugging and performance tuning. Note +that, as the "AML tracer" logs are implemented via ACPI_DEBUG_PRINT() +macro, CONFIG_ACPI_DEBUG is also required to be enabled for enabling +"AML tracer" logs. + +The following command examples illustrate the usage of the "AML tracer" +functionality: + +a. Filter out the method start/stop "AML tracer" logs when control + methods are being evaluated:: + + # cd /sys/module/acpi/parameters + # echo "0x80" > trace_debug_layer + # echo "0x10" > trace_debug_level + # echo "enable" > trace_state + +b. Filter out the method start/stop "AML tracer" when the specified + control method is being evaluated:: + + # cd /sys/module/acpi/parameters + # echo "0x80" > trace_debug_layer + # echo "0x10" > trace_debug_level + # echo "\PPPP.AAAA.TTTT.HHHH" > trace_method_name + # echo "method" > trace_state + +c. Filter out the method start/stop "AML tracer" logs when the specified + control method is being evaluated for the first time:: + + # cd /sys/module/acpi/parameters + # echo "0x80" > trace_debug_layer + # echo "0x10" > trace_debug_level + # echo "\PPPP.AAAA.TTTT.HHHH" > trace_method_name + # echo "method-once" > trace_state + +d. Filter out the method/opcode start/stop "AML tracer" when the + specified control method is being evaluated:: + + # cd /sys/module/acpi/parameters + # echo "0x80" > trace_debug_layer + # echo "0x10" > trace_debug_level + # echo "\PPPP.AAAA.TTTT.HHHH" > trace_method_name + # echo "opcode" > trace_state + +e. Filter out the method/opcode start/stop "AML tracer" when the + specified control method is being evaluated for the first time:: + + # cd /sys/module/acpi/parameters + # echo "0x80" > trace_debug_layer + # echo "0x10" > trace_debug_level + # echo "\PPPP.AAAA.TTTT.HHHH" > trace_method_name + # echo "opcode-opcode" > trace_state + +Note that all above method tracing facility related module parameters can +be used as the boot parameters, for example:: + + acpi.trace_debug_layer=0x80 acpi.trace_debug_level=0x10 \ + acpi.trace_method_name=\_SB.LID0._LID acpi.trace_state=opcode-once + + +Interface descriptions +====================== + +All method tracing functions can be configured via ACPI module +parameters that are accessible at /sys/module/acpi/parameters/: + +trace_method_name + The full path of the AML method that the user wants to trace. + + Note that the full path shouldn't contain the trailing "_"s in its + name segments but may contain "\" to form an absolute path. + +trace_debug_layer + The temporary debug_layer used when the tracing feature is enabled. + + Using ACPI_EXECUTER (0x80) by default, which is the debug_layer + used to match all "AML tracer" logs. + +trace_debug_level + The temporary debug_level used when the tracing feature is enabled. + + Using ACPI_LV_TRACE_POINT (0x10) by default, which is the + debug_level used to match all "AML tracer" logs. + +trace_state + The status of the tracing feature. + + Users can enable/disable this debug tracing feature by executing + the following command:: + + # echo string > /sys/module/acpi/parameters/trace_state + +Where "string" should be one of the following: + +"disable" + Disable the method tracing feature. + +"enable" + Enable the method tracing feature. + + ACPICA debugging messages matching "trace_debug_layer/trace_debug_level" + during any method execution will be logged. + +"method" + Enable the method tracing feature. + + ACPICA debugging messages matching "trace_debug_layer/trace_debug_level" + during method execution of "trace_method_name" will be logged. + +"method-once" + Enable the method tracing feature. + + ACPICA debugging messages matching "trace_debug_layer/trace_debug_level" + during method execution of "trace_method_name" will be logged only once. + +"opcode" + Enable the method tracing feature. + + ACPICA debugging messages matching "trace_debug_layer/trace_debug_level" + during method/opcode execution of "trace_method_name" will be logged. + +"opcode-once" + Enable the method tracing feature. + + ACPICA debugging messages matching "trace_debug_layer/trace_debug_level" + during method/opcode execution of "trace_method_name" will be logged only + once. + +Note that, the difference between the "enable" and other feature +enabling options are: + +1. When "enable" is specified, since + "trace_debug_layer/trace_debug_level" shall apply to all control + method evaluations, after configuring "trace_state" to "enable", + "trace_method_name" will be reset to NULL. +2. When "method/opcode" is specified, if + "trace_method_name" is NULL when "trace_state" is configured to + these options, the "trace_debug_layer/trace_debug_level" will + apply to all control method evaluations. diff --git a/Documentation/acpi/namespace.txt b/Documentation/firmware-guide/acpi/namespace.rst index 1860cb3865c6..835521baeb89 100644 --- a/Documentation/acpi/namespace.txt +++ b/Documentation/firmware-guide/acpi/namespace.rst @@ -1,85 +1,90 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: <isonum.txt> + +=================================================== ACPI Device Tree - Representation of ACPI Namespace +=================================================== -Copyright (C) 2013, Intel Corporation -Author: Lv Zheng <lv.zheng@intel.com> +:Copyright: |copy| 2013, Intel Corporation +:Author: Lv Zheng <lv.zheng@intel.com> -Abstract: +:Credit: Thanks for the help from Zhang Rui <rui.zhang@intel.com> and + Rafael J.Wysocki <rafael.j.wysocki@intel.com>. +Abstract +======== The Linux ACPI subsystem converts ACPI namespace objects into a Linux device tree under the /sys/devices/LNXSYSTEM:00 and updates it upon -receiving ACPI hotplug notification events. For each device object in this -hierarchy there is a corresponding symbolic link in the +receiving ACPI hotplug notification events. For each device object +in this hierarchy there is a corresponding symbolic link in the /sys/bus/acpi/devices. + This document illustrates the structure of the ACPI device tree. +ACPI Definition Blocks +====================== + +The ACPI firmware sets up RSDP (Root System Description Pointer) in the +system memory address space pointing to the XSDT (Extended System +Description Table). The XSDT always points to the FADT (Fixed ACPI +Description Table) using its first entry, the data within the FADT +includes various fixed-length entries that describe fixed ACPI features +of the hardware. The FADT contains a pointer to the DSDT +(Differentiated System Descripition Table). The XSDT also contains +entries pointing to possibly multiple SSDTs (Secondary System +Description Table). + +The DSDT and SSDT data is organized in data structures called definition +blocks that contain definitions of various objects, including ACPI +control methods, encoded in AML (ACPI Machine Language). The data block +of the DSDT along with the contents of SSDTs represents a hierarchical +data structure called the ACPI namespace whose topology reflects the +structure of the underlying hardware platform. + +The relationships between ACPI System Definition Tables described above +are illustrated in the following diagram:: + + +---------+ +-------+ +--------+ +------------------------+ + | RSDP | +->| XSDT | +->| FADT | | +-------------------+ | + +---------+ | +-------+ | +--------+ +-|->| DSDT | | + | Pointer | | | Entry |-+ | ...... | | | +-------------------+ | + +---------+ | +-------+ | X_DSDT |--+ | | Definition Blocks | | + | Pointer |-+ | ..... | | ...... | | +-------------------+ | + +---------+ +-------+ +--------+ | +-------------------+ | + | Entry |------------------|->| SSDT | | + +- - - -+ | +-------------------| | + | Entry | - - - - - - - -+ | | Definition Blocks | | + +- - - -+ | | +-------------------+ | + | | +- - - - - - - - - -+ | + +-|->| SSDT | | + | +-------------------+ | + | | Definition Blocks | | + | +- - - - - - - - - -+ | + +------------------------+ + | + OSPM Loading | + \|/ + +----------------+ + | ACPI Namespace | + +----------------+ + + Figure 1. ACPI Definition Blocks + +.. note:: RSDP can also contain a pointer to the RSDT (Root System + Description Table). Platforms provide RSDT to enable + compatibility with ACPI 1.0 operating systems. The OS is expected + to use XSDT, if present. + + +Example ACPI Namespace +====================== + +All definition blocks are loaded into a single namespace. The namespace +is a hierarchy of objects identified by names and paths. +The following naming conventions apply to object names in the ACPI +namespace: -Credit: - -Thanks for the help from Zhang Rui <rui.zhang@intel.com> and Rafael J. -Wysocki <rafael.j.wysocki@intel.com>. - - -1. ACPI Definition Blocks - - The ACPI firmware sets up RSDP (Root System Description Pointer) in the - system memory address space pointing to the XSDT (Extended System - Description Table). The XSDT always points to the FADT (Fixed ACPI - Description Table) using its first entry, the data within the FADT - includes various fixed-length entries that describe fixed ACPI features - of the hardware. The FADT contains a pointer to the DSDT - (Differentiated System Descripition Table). The XSDT also contains - entries pointing to possibly multiple SSDTs (Secondary System - Description Table). - - The DSDT and SSDT data is organized in data structures called definition - blocks that contain definitions of various objects, including ACPI - control methods, encoded in AML (ACPI Machine Language). The data block - of the DSDT along with the contents of SSDTs represents a hierarchical - data structure called the ACPI namespace whose topology reflects the - structure of the underlying hardware platform. - - The relationships between ACPI System Definition Tables described above - are illustrated in the following diagram. - - +---------+ +-------+ +--------+ +------------------------+ - | RSDP | +->| XSDT | +->| FADT | | +-------------------+ | - +---------+ | +-------+ | +--------+ +-|->| DSDT | | - | Pointer | | | Entry |-+ | ...... | | | +-------------------+ | - +---------+ | +-------+ | X_DSDT |--+ | | Definition Blocks | | - | Pointer |-+ | ..... | | ...... | | +-------------------+ | - +---------+ +-------+ +--------+ | +-------------------+ | - | Entry |------------------|->| SSDT | | - +- - - -+ | +-------------------| | - | Entry | - - - - - - - -+ | | Definition Blocks | | - +- - - -+ | | +-------------------+ | - | | +- - - - - - - - - -+ | - +-|->| SSDT | | - | +-------------------+ | - | | Definition Blocks | | - | +- - - - - - - - - -+ | - +------------------------+ - | - OSPM Loading | - \|/ - +----------------+ - | ACPI Namespace | - +----------------+ - - Figure 1. ACPI Definition Blocks - - NOTE: RSDP can also contain a pointer to the RSDT (Root System - Description Table). Platforms provide RSDT to enable - compatibility with ACPI 1.0 operating systems. The OS is expected - to use XSDT, if present. - - -2. Example ACPI Namespace - - All definition blocks are loaded into a single namespace. The namespace - is a hierarchy of objects identified by names and paths. - The following naming conventions apply to object names in the ACPI - namespace: 1. All names are 32 bits long. 2. The first byte of a name must be one of 'A' - 'Z', '_'. 3. Each of the remaining bytes of a name must be one of 'A' - 'Z', '0' @@ -91,7 +96,7 @@ Wysocki <rafael.j.wysocki@intel.com>. (i.e. names prepended with '^' are relative to the parent of the current namespace node). - The figure below shows an example ACPI namespace. +The figure below shows an example ACPI namespace:: +------+ | \ | Root @@ -184,19 +189,20 @@ Wysocki <rafael.j.wysocki@intel.com>. Figure 2. Example ACPI Namespace -3. Linux ACPI Device Objects +Linux ACPI Device Objects +========================= - The Linux kernel's core ACPI subsystem creates struct acpi_device - objects for ACPI namespace objects representing devices, power resources - processors, thermal zones. Those objects are exported to user space via - sysfs as directories in the subtree under /sys/devices/LNXSYSTM:00. The - format of their names is <bus_id:instance>, where 'bus_id' refers to the - ACPI namespace representation of the given object and 'instance' is used - for distinguishing different object of the same 'bus_id' (it is - two-digit decimal representation of an unsigned integer). +The Linux kernel's core ACPI subsystem creates struct acpi_device +objects for ACPI namespace objects representing devices, power resources +processors, thermal zones. Those objects are exported to user space via +sysfs as directories in the subtree under /sys/devices/LNXSYSTM:00. The +format of their names is <bus_id:instance>, where 'bus_id' refers to the +ACPI namespace representation of the given object and 'instance' is used +for distinguishing different object of the same 'bus_id' (it is +two-digit decimal representation of an unsigned integer). - The value of 'bus_id' depends on the type of the object whose name it is - part of as listed in the table below. +The value of 'bus_id' depends on the type of the object whose name it is +part of as listed in the table below:: +---+-----------------+-------+----------+ | | Object/Feature | Table | bus_id | @@ -226,10 +232,11 @@ Wysocki <rafael.j.wysocki@intel.com>. Table 1. ACPI Namespace Objects Mapping - The following rules apply when creating struct acpi_device objects on - the basis of the contents of ACPI System Description Tables (as - indicated by the letter in the first column and the notation in the - second column of the table above): +The following rules apply when creating struct acpi_device objects on +the basis of the contents of ACPI System Description Tables (as +indicated by the letter in the first column and the notation in the +second column of the table above): + N: The object's source is an ACPI namespace node (as indicated by the named object's type in the second column). In that case the object's @@ -249,13 +256,14 @@ Wysocki <rafael.j.wysocki@intel.com>. struct acpi_device object with LNXVIDEO 'bus_id' will be created for it. - The third column of the above table indicates which ACPI System - Description Tables contain information used for the creation of the - struct acpi_device objects represented by the given row (xSDT means DSDT - or SSDT). +The third column of the above table indicates which ACPI System +Description Tables contain information used for the creation of the +struct acpi_device objects represented by the given row (xSDT means DSDT +or SSDT). + +The forth column of the above table indicates the 'bus_id' generation +rule of the struct acpi_device object: - The forth column of the above table indicates the 'bus_id' generation - rule of the struct acpi_device object: _HID: _HID in the last column of the table means that the object's bus_id is derived from the _HID/_CID identification objects present under @@ -275,45 +283,47 @@ Wysocki <rafael.j.wysocki@intel.com>. object's bus_id. -4. Linux ACPI Physical Device Glue - - ACPI device (i.e. struct acpi_device) objects may be linked to other - objects in the Linux' device hierarchy that represent "physical" devices - (for example, devices on the PCI bus). If that happens, it means that - the ACPI device object is a "companion" of a device otherwise - represented in a different way and is used (1) to provide configuration - information on that device which cannot be obtained by other means and - (2) to do specific things to the device with the help of its ACPI - control methods. One ACPI device object may be linked this way to - multiple "physical" devices. - - If an ACPI device object is linked to a "physical" device, its sysfs - directory contains the "physical_node" symbolic link to the sysfs - directory of the target device object. In turn, the target device's - sysfs directory will then contain the "firmware_node" symbolic link to - the sysfs directory of the companion ACPI device object. - The linking mechanism relies on device identification provided by the - ACPI namespace. For example, if there's an ACPI namespace object - representing a PCI device (i.e. a device object under an ACPI namespace - object representing a PCI bridge) whose _ADR returns 0x00020000 and the - bus number of the parent PCI bridge is 0, the sysfs directory - representing the struct acpi_device object created for that ACPI - namespace object will contain the 'physical_node' symbolic link to the - /sys/devices/pci0000:00/0000:00:02:0/ sysfs directory of the - corresponding PCI device. - - The linking mechanism is generally bus-specific. The core of its - implementation is located in the drivers/acpi/glue.c file, but there are - complementary parts depending on the bus types in question located - elsewhere. For example, the PCI-specific part of it is located in - drivers/pci/pci-acpi.c. - - -5. Example Linux ACPI Device Tree - - The sysfs hierarchy of struct acpi_device objects corresponding to the - example ACPI namespace illustrated in Figure 2 with the addition of - fixed PWR_BUTTON/SLP_BUTTON devices is shown below. +Linux ACPI Physical Device Glue +=============================== + +ACPI device (i.e. struct acpi_device) objects may be linked to other +objects in the Linux' device hierarchy that represent "physical" devices +(for example, devices on the PCI bus). If that happens, it means that +the ACPI device object is a "companion" of a device otherwise +represented in a different way and is used (1) to provide configuration +information on that device which cannot be obtained by other means and +(2) to do specific things to the device with the help of its ACPI +control methods. One ACPI device object may be linked this way to +multiple "physical" devices. + +If an ACPI device object is linked to a "physical" device, its sysfs +directory contains the "physical_node" symbolic link to the sysfs +directory of the target device object. In turn, the target device's +sysfs directory will then contain the "firmware_node" symbolic link to +the sysfs directory of the companion ACPI device object. +The linking mechanism relies on device identification provided by the +ACPI namespace. For example, if there's an ACPI namespace object +representing a PCI device (i.e. a device object under an ACPI namespace +object representing a PCI bridge) whose _ADR returns 0x00020000 and the +bus number of the parent PCI bridge is 0, the sysfs directory +representing the struct acpi_device object created for that ACPI +namespace object will contain the 'physical_node' symbolic link to the +/sys/devices/pci0000:00/0000:00:02:0/ sysfs directory of the +corresponding PCI device. + +The linking mechanism is generally bus-specific. The core of its +implementation is located in the drivers/acpi/glue.c file, but there are +complementary parts depending on the bus types in question located +elsewhere. For example, the PCI-specific part of it is located in +drivers/pci/pci-acpi.c. + + +Example Linux ACPI Device Tree +================================= + +The sysfs hierarchy of struct acpi_device objects corresponding to the +example ACPI namespace illustrated in Figure 2 with the addition of +fixed PWR_BUTTON/SLP_BUTTON devices is shown below:: +--------------+---+-----------------+ | LNXSYSTEM:00 | \ | acpi:LNXSYSTEM: | @@ -377,12 +387,14 @@ Wysocki <rafael.j.wysocki@intel.com>. Figure 3. Example Linux ACPI Device Tree - NOTE: Each node is represented as "object/path/modalias", where: - 1. 'object' is the name of the object's directory in sysfs. - 2. 'path' is the ACPI namespace path of the corresponding - ACPI namespace object, as returned by the object's 'path' - sysfs attribute. - 3. 'modalias' is the value of the object's 'modalias' sysfs - attribute (as described earlier in this document). - NOTE: N/A indicates the device object does not have the 'path' or the - 'modalias' attribute. +.. note:: Each node is represented as "object/path/modalias", where: + + 1. 'object' is the name of the object's directory in sysfs. + 2. 'path' is the ACPI namespace path of the corresponding + ACPI namespace object, as returned by the object's 'path' + sysfs attribute. + 3. 'modalias' is the value of the object's 'modalias' sysfs + attribute (as described earlier in this document). + +.. note:: N/A indicates the device object does not have the 'path' or the + 'modalias' attribute. diff --git a/Documentation/acpi/osi.txt b/Documentation/firmware-guide/acpi/osi.rst index 50cde0ceb9b0..29e9ef79ebc0 100644 --- a/Documentation/acpi/osi.txt +++ b/Documentation/firmware-guide/acpi/osi.rst @@ -1,5 +1,8 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========================== ACPI _OSI and _REV methods --------------------------- +========================== An ACPI BIOS can use the "Operating System Interfaces" method (_OSI) to find out what the operating system supports. Eg. If BIOS @@ -14,7 +17,7 @@ This document explains how and why the BIOS and Linux should use these methods. It also explains how and why they are widely misused. How to use _OSI ---------------- +=============== Linux runs on two groups of machines -- those that are tested by the OEM to be compatible with Linux, and those that were never tested with Linux, @@ -62,7 +65,7 @@ the string when that support is added to the kernel. That was easy. Read on, to find out how to do it wrong. Before _OSI, there was _OS --------------------------- +========================== ACPI 1.0 specified "_OS" as an "object that evaluates to a string that identifies the operating system." @@ -96,7 +99,7 @@ That is the *only* viable strategy, as that is what modern Windows does, and so doing otherwise could steer the BIOS down an untested path. _OSI is born, and immediately misused --------------------------------------- +===================================== With _OSI, the *BIOS* provides the string describing an interface, and asks the OS: "YES/NO, are you compatible with this interface?" @@ -144,7 +147,7 @@ catastrophic failure resulting from the BIOS taking paths that were never validated under *any* OS. Do not use _REV ---------------- +=============== Since _OSI("Linux") went away, some BIOS writers used _REV to support Linux and Windows differences in the same BIOS. @@ -164,7 +167,7 @@ from mid-2015 onward. The ACPI specification will also be updated to reflect that _REV is deprecated, and always returns 2. Apple Mac and _OSI("Darwin") ----------------------------- +============================ On Apple's Mac platforms, the ACPI BIOS invokes _OSI("Darwin") to determine if the machine is running Apple OSX. diff --git a/Documentation/acpi/video_extension.txt b/Documentation/firmware-guide/acpi/video_extension.rst index 79bf6a4921be..099b8607e07b 100644 --- a/Documentation/acpi/video_extension.txt +++ b/Documentation/firmware-guide/acpi/video_extension.rst @@ -1,5 +1,8 @@ +.. SPDX-License-Identifier: GPL-2.0 + +===================== ACPI video extensions -~~~~~~~~~~~~~~~~~~~~~ +===================== This driver implement the ACPI Extensions For Display Adapters for integrated graphics devices on motherboard, as specified in ACPI 2.0 @@ -8,9 +11,10 @@ defining the video POST device, retrieving EDID information or to setup a video output, etc. Note that this is an ref. implementation only. It may or may not work for your integrated video device. -The ACPI video driver does 3 things regarding backlight control: +The ACPI video driver does 3 things regarding backlight control. -1 Export a sysfs interface for user space to control backlight level +Export a sysfs interface for user space to control backlight level +================================================================== If the ACPI table has a video device, and acpi_backlight=vendor kernel command line is not present, the driver will register a backlight device @@ -22,36 +26,41 @@ The backlight sysfs interface has a standard definition here: Documentation/ABI/stable/sysfs-class-backlight. And what ACPI video driver does is: -actual_brightness: on read, control method _BQC will be evaluated to -get the brightness level the firmware thinks it is at; -bl_power: not implemented, will set the current brightness instead; -brightness: on write, control method _BCM will run to set the requested -brightness level; -max_brightness: Derived from the _BCL package(see below); -type: firmware + +actual_brightness: + on read, control method _BQC will be evaluated to + get the brightness level the firmware thinks it is at; +bl_power: + not implemented, will set the current brightness instead; +brightness: + on write, control method _BCM will run to set the requested brightness level; +max_brightness: + Derived from the _BCL package(see below); +type: + firmware Note that ACPI video backlight driver will always use index for brightness, actual_brightness and max_brightness. So if we have -the following _BCL package: +the following _BCL package:: -Method (_BCL, 0, NotSerialized) -{ - Return (Package (0x0C) + Method (_BCL, 0, NotSerialized) { - 0x64, - 0x32, - 0x0A, - 0x14, - 0x1E, - 0x28, - 0x32, - 0x3C, - 0x46, - 0x50, - 0x5A, - 0x64 - }) -} + Return (Package (0x0C) + { + 0x64, + 0x32, + 0x0A, + 0x14, + 0x1E, + 0x28, + 0x32, + 0x3C, + 0x46, + 0x50, + 0x5A, + 0x64 + }) + } The first two levels are for when laptop are on AC or on battery and are not used by Linux currently. The remaining 10 levels are supported levels @@ -62,13 +71,15 @@ as a "brightness level" indicator. Thus from the user space perspective the range of available brightness levels is from 0 to 9 (max_brightness) inclusive. -2 Notify user space about hotkey event +Notify user space about hotkey event +==================================== There are generally two cases for hotkey event reporting: + i) For some laptops, when user presses the hotkey, a scancode will be generated and sent to user space through the input device created by the keyboard driver as a key type input event, with proper remap, the - following key code will appear to user space: + following key code will appear to user space:: EV_KEY, KEY_BRIGHTNESSUP EV_KEY, KEY_BRIGHTNESSDOWN @@ -84,23 +95,27 @@ ii) For some laptops, the press of the hotkey will not generate the notify value it received and send the event to user space through the input device it created: + ===== ================== event keycode + ===== ================== 0x86 KEY_BRIGHTNESSUP 0x87 KEY_BRIGHTNESSDOWN etc. + ===== ================== so this would lead to the same effect as case i) now. Once user space tool receives this event, it can modify the backlight level through the sysfs interface. -3 Change backlight level in the kernel +Change backlight level in the kernel +==================================== This works for machines covered by case ii) in Section 2. Once the driver received a notification, it will set the backlight level accordingly. This does not affect the sending of event to user space, they are always sent to user space regardless of whether or not the video module controls the backlight level directly. This behaviour can be controlled through the brightness_switch_enabled -module parameter as documented in admin-guide/kernel-parameters.rst. It is recommended to -disable this behaviour once a GUI environment starts up and wants to have full -control of the backlight level. +module parameter as documented in admin-guide/kernel-parameters.rst. It is +recommended to disable this behaviour once a GUI environment starts up and +wants to have full control of the backlight level. diff --git a/Documentation/firmware-guide/index.rst b/Documentation/firmware-guide/index.rst new file mode 100644 index 000000000000..5355784ca0a2 --- /dev/null +++ b/Documentation/firmware-guide/index.rst @@ -0,0 +1,13 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=============================== +The Linux kernel firmware guide +=============================== + +This section describes the ACPI subsystem in Linux from firmware perspective. + +.. toctree:: + :maxdepth: 1 + + acpi/index + diff --git a/Documentation/index.rst b/Documentation/index.rst index 80a421cb935e..fdfa85c56a50 100644 --- a/Documentation/index.rst +++ b/Documentation/index.rst @@ -35,6 +35,16 @@ trying to get it to work optimally on a given system. admin-guide/index +Firmware-related documentation +------------------------------ +The following holds information on the kernel's expectations regarding the +platform firmwares. + +.. toctree:: + :maxdepth: 2 + + firmware-guide/index + Application-developer documentation ----------------------------------- diff --git a/MAINTAINERS b/MAINTAINERS index 7be412e1a380..d846ccd81235 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6594,7 +6594,7 @@ M: Andy Shevchenko <andriy.shevchenko@linux.intel.com> L: linux-gpio@vger.kernel.org L: linux-acpi@vger.kernel.org S: Maintained -F: Documentation/acpi/gpio-properties.txt +F: Documentation/firmware-guide/acpi/gpio-properties.rst F: drivers/gpio/gpiolib-acpi.c GPIO IR Transmitter diff --git a/arch/x86/boot/compressed/acpi.c b/arch/x86/boot/compressed/acpi.c index 0ef4ad55b29b..ad84239e595e 100644 --- a/arch/x86/boot/compressed/acpi.c +++ b/arch/x86/boot/compressed/acpi.c @@ -276,7 +276,7 @@ static unsigned long get_acpi_srat_table(void) if (acpi_table) { header = (struct acpi_table_header *)acpi_table; - if (ACPI_COMPARE_NAME(header->signature, ACPI_SIG_SRAT)) + if (ACPI_COMPARE_NAMESEG(header->signature, ACPI_SIG_SRAT)) return acpi_table; } entry += size; diff --git a/drivers/acpi/acpi_configfs.c b/drivers/acpi/acpi_configfs.c index 81bfc6197293..f92033661239 100644 --- a/drivers/acpi/acpi_configfs.c +++ b/drivers/acpi/acpi_configfs.c @@ -109,7 +109,7 @@ static ssize_t acpi_table_signature_show(struct config_item *cfg, char *str) if (!h) return -EINVAL; - return sprintf(str, "%.*s\n", ACPI_NAME_SIZE, h->signature); + return sprintf(str, "%.*s\n", ACPI_NAMESEG_SIZE, h->signature); } static ssize_t acpi_table_length_show(struct config_item *cfg, char *str) @@ -170,7 +170,7 @@ static ssize_t acpi_table_asl_compiler_id_show(struct config_item *cfg, if (!h) return -EINVAL; - return sprintf(str, "%.*s\n", ACPI_NAME_SIZE, h->asl_compiler_id); + return sprintf(str, "%.*s\n", ACPI_NAMESEG_SIZE, h->asl_compiler_id); } static ssize_t acpi_table_asl_compiler_revision_show(struct config_item *cfg, diff --git a/drivers/acpi/acpi_dbg.c b/drivers/acpi/acpi_dbg.c index 4a434c23a196..d18246a2a65e 100644 --- a/drivers/acpi/acpi_dbg.c +++ b/drivers/acpi/acpi_dbg.c @@ -390,7 +390,7 @@ again: return size > 0 ? size : ret; } -static int acpi_aml_thread(void *unsed) +static int acpi_aml_thread(void *unused) { acpi_osd_exec_callback function = NULL; void *context; diff --git a/drivers/acpi/acpi_lpat.c b/drivers/acpi/acpi_lpat.c index 2cd9f738812b..43f1b99c86ca 100644 --- a/drivers/acpi/acpi_lpat.c +++ b/drivers/acpi/acpi_lpat.c @@ -22,7 +22,7 @@ * LPAT conversion table * * @lpat_table: the temperature_raw mapping table structure - * @raw: the raw value, used as a key to get the temerature from the + * @raw: the raw value, used as a key to get the temperature from the * above mapping table * * A positive converted temperature value will be returned on success, diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c index 1e2a10a06b9d..cf768608437e 100644 --- a/drivers/acpi/acpi_lpss.c +++ b/drivers/acpi/acpi_lpss.c @@ -1142,8 +1142,8 @@ static struct dev_pm_domain acpi_lpss_pm_domain = { .thaw_noirq = acpi_subsys_thaw_noirq, .poweroff = acpi_subsys_suspend, .poweroff_late = acpi_lpss_suspend_late, - .poweroff_noirq = acpi_subsys_suspend_noirq, - .restore_noirq = acpi_subsys_resume_noirq, + .poweroff_noirq = acpi_lpss_suspend_noirq, + .restore_noirq = acpi_lpss_resume_noirq, .restore_early = acpi_lpss_resume_early, #endif .runtime_suspend = acpi_lpss_runtime_suspend, diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h index a2dfbf6b004e..13d513b81589 100644 --- a/drivers/acpi/acpica/aclocal.h +++ b/drivers/acpi/acpica/aclocal.h @@ -293,7 +293,7 @@ acpi_status (*acpi_internal_method) (struct acpi_walk_state * walk_state); * expected_return_btypes - Allowed type(s) for the return value */ struct acpi_name_info { - char name[ACPI_NAME_SIZE]; + char name[ACPI_NAMESEG_SIZE]; u16 argument_list; u8 expected_btypes; }; @@ -370,7 +370,7 @@ typedef acpi_status (*acpi_object_converter) (struct acpi_namespace_node * converted_object); struct acpi_simple_repair_info { - char name[ACPI_NAME_SIZE]; + char name[ACPI_NAMESEG_SIZE]; u32 unexpected_btypes; u32 package_index; acpi_object_converter object_converter; diff --git a/drivers/acpi/acpica/dbexec.c b/drivers/acpi/acpica/dbexec.c index bb43305cb215..4027eaab18a4 100644 --- a/drivers/acpi/acpica/dbexec.c +++ b/drivers/acpi/acpica/dbexec.c @@ -453,7 +453,7 @@ acpi_db_execute(char *name, char **args, acpi_object_type *types, u32 flags) /* Dump a _PLD buffer if present */ - if (ACPI_COMPARE_NAME + if (ACPI_COMPARE_NAMESEG ((ACPI_CAST_PTR (struct acpi_namespace_node, acpi_gbl_db_method_info.method)->name.ascii), diff --git a/drivers/acpi/acpica/dbnames.c b/drivers/acpi/acpica/dbnames.c index 004d34d9369b..63fe30e86807 100644 --- a/drivers/acpi/acpica/dbnames.c +++ b/drivers/acpi/acpica/dbnames.c @@ -354,7 +354,7 @@ acpi_status acpi_db_find_name_in_namespace(char *name_arg) char acpi_name[5] = "____"; char *acpi_name_ptr = acpi_name; - if (strlen(name_arg) > ACPI_NAME_SIZE) { + if (strlen(name_arg) > ACPI_NAMESEG_SIZE) { acpi_os_printf("Name must be no longer than 4 characters\n"); return (AE_OK); } diff --git a/drivers/acpi/acpica/dsinit.c b/drivers/acpi/acpica/dsinit.c index a4a24ffe5fae..4ebd23700bbc 100644 --- a/drivers/acpi/acpica/dsinit.c +++ b/drivers/acpi/acpica/dsinit.c @@ -200,7 +200,7 @@ acpi_ds_initialize_objects(u32 table_index, /* DSDT is always the first AML table */ - if (ACPI_COMPARE_NAME(table->signature, ACPI_SIG_DSDT)) { + if (ACPI_COMPARE_NAMESEG(table->signature, ACPI_SIG_DSDT)) { ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT, "\nInitializing Namespace objects:\n")); } diff --git a/drivers/acpi/acpica/evgpeinit.c b/drivers/acpi/acpica/evgpeinit.c index c92d2f6ebe01..b04f982e59fa 100644 --- a/drivers/acpi/acpica/evgpeinit.c +++ b/drivers/acpi/acpica/evgpeinit.c @@ -292,7 +292,7 @@ acpi_ev_match_gpe_method(acpi_handle obj_handle, acpi_status status; u32 gpe_number; u8 temp_gpe_number; - char name[ACPI_NAME_SIZE + 1]; + char name[ACPI_NAMESEG_SIZE + 1]; u8 type; ACPI_FUNCTION_TRACE(ev_match_gpe_method); @@ -310,7 +310,7 @@ acpi_ev_match_gpe_method(acpi_handle obj_handle, * 1) Extract the method name and null terminate it */ ACPI_MOVE_32_TO_32(name, &method_node->name.integer); - name[ACPI_NAME_SIZE] = 0; + name[ACPI_NAMESEG_SIZE] = 0; /* 2) Name must begin with an underscore */ diff --git a/drivers/acpi/acpica/exnames.c b/drivers/acpi/acpica/exnames.c index bd68d66e89f0..6b76be5212a4 100644 --- a/drivers/acpi/acpica/exnames.c +++ b/drivers/acpi/acpica/exnames.c @@ -53,10 +53,10 @@ static char *acpi_ex_allocate_name_string(u32 prefix_count, u32 num_name_segs) /* Special case for root */ - size_needed = 1 + (ACPI_NAME_SIZE * num_name_segs) + 2 + 1; + size_needed = 1 + (ACPI_NAMESEG_SIZE * num_name_segs) + 2 + 1; } else { size_needed = - prefix_count + (ACPI_NAME_SIZE * num_name_segs) + 2 + 1; + prefix_count + (ACPI_NAMESEG_SIZE * num_name_segs) + 2 + 1; } /* @@ -141,7 +141,7 @@ static acpi_status acpi_ex_name_segment(u8 ** in_aml_address, char *name_string) } for (index = 0; - (index < ACPI_NAME_SIZE) + (index < ACPI_NAMESEG_SIZE) && (acpi_ut_valid_name_char(*aml_address, 0)); index++) { char_buf[index] = *aml_address++; } diff --git a/drivers/acpi/acpica/nsaccess.c b/drivers/acpi/acpica/nsaccess.c index 75192b958544..7b855603f81a 100644 --- a/drivers/acpi/acpica/nsaccess.c +++ b/drivers/acpi/acpica/nsaccess.c @@ -683,7 +683,7 @@ acpi_ns_lookup(union acpi_generic_state *scope_info, /* Point to next name segment and make this node current */ - path += ACPI_NAME_SIZE; + path += ACPI_NAMESEG_SIZE; current_node = this_node; } diff --git a/drivers/acpi/acpica/nsalloc.c b/drivers/acpi/acpica/nsalloc.c index 5470213b8e64..6eb63db72249 100644 --- a/drivers/acpi/acpica/nsalloc.c +++ b/drivers/acpi/acpica/nsalloc.c @@ -74,6 +74,10 @@ void acpi_ns_delete_node(struct acpi_namespace_node *node) ACPI_FUNCTION_NAME(ns_delete_node); + if (!node) { + return_VOID; + } + /* Detach an object if there is one */ acpi_ns_detach_object(node); diff --git a/drivers/acpi/acpica/nsdump.c b/drivers/acpi/acpica/nsdump.c index 15070bd0c28a..1b12c172e115 100644 --- a/drivers/acpi/acpica/nsdump.c +++ b/drivers/acpi/acpica/nsdump.c @@ -70,7 +70,7 @@ void acpi_ns_print_pathname(u32 num_segments, const char *pathname) acpi_os_printf("?"); } - pathname += ACPI_NAME_SIZE; + pathname += ACPI_NAMESEG_SIZE; num_segments--; if (num_segments) { acpi_os_printf("."); diff --git a/drivers/acpi/acpica/nsinit.c b/drivers/acpi/acpica/nsinit.c index 19fb8dda870f..53e5d00d3a5e 100644 --- a/drivers/acpi/acpica/nsinit.c +++ b/drivers/acpi/acpica/nsinit.c @@ -478,7 +478,7 @@ acpi_ns_find_ini_methods(acpi_handle obj_handle, /* We are only looking for methods named _INI */ - if (!ACPI_COMPARE_NAME(node->name.ascii, METHOD_NAME__INI)) { + if (!ACPI_COMPARE_NAMESEG(node->name.ascii, METHOD_NAME__INI)) { return (AE_OK); } @@ -641,7 +641,7 @@ acpi_ns_init_one_device(acpi_handle obj_handle, * Note: We know there is an _INI within this subtree, but it may not be * under this particular device, it may be lower in the branch. */ - if (!ACPI_COMPARE_NAME(device_node->name.ascii, "_SB_") || + if (!ACPI_COMPARE_NAMESEG(device_node->name.ascii, "_SB_") || device_node->parent != acpi_gbl_root_node) { ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname (ACPI_TYPE_METHOD, device_node, diff --git a/drivers/acpi/acpica/nsnames.c b/drivers/acpi/acpica/nsnames.c index 289c15bb8c6a..370bbc867745 100644 --- a/drivers/acpi/acpica/nsnames.c +++ b/drivers/acpi/acpica/nsnames.c @@ -108,8 +108,8 @@ acpi_ns_handle_to_name(acpi_handle target_handle, struct acpi_buffer *buffer) /* Just copy the ACPI name from the Node and zero terminate it */ node_name = acpi_ut_get_node_name(node); - ACPI_MOVE_NAME(buffer->pointer, node_name); - ((char *)buffer->pointer)[ACPI_NAME_SIZE] = 0; + ACPI_COPY_NAMESEG(buffer->pointer, node_name); + ((char *)buffer->pointer)[ACPI_NAMESEG_SIZE] = 0; ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "%4.4s\n", (char *)buffer->pointer)); return_ACPI_STATUS(AE_OK); @@ -198,7 +198,7 @@ acpi_ns_build_normalized_path(struct acpi_namespace_node *node, char *full_path, u32 path_size, u8 no_trailing) { u32 length = 0, i; - char name[ACPI_NAME_SIZE]; + char name[ACPI_NAMESEG_SIZE]; u8 do_no_trailing; char c, *left, *right; struct acpi_namespace_node *next_node; @@ -446,7 +446,7 @@ static void acpi_ns_normalize_pathname(char *original_path) /* Do one nameseg at a time */ - for (i = 0; (i < ACPI_NAME_SIZE) && *input_path; i++) { + for (i = 0; (i < ACPI_NAMESEG_SIZE) && *input_path; i++) { if ((i == 0) || (*input_path != '_')) { /* First char is allowed to be underscore */ *new_path = *input_path; new_path++; diff --git a/drivers/acpi/acpica/nsparse.c b/drivers/acpi/acpica/nsparse.c index c0b4f7bedfab..f16cf5e4742c 100644 --- a/drivers/acpi/acpica/nsparse.c +++ b/drivers/acpi/acpica/nsparse.c @@ -203,7 +203,7 @@ acpi_ns_one_complete_parse(u32 pass_number, /* Found OSDT table, enable the namespace override feature */ - if (ACPI_COMPARE_NAME(table->signature, ACPI_SIG_OSDT) && + if (ACPI_COMPARE_NAMESEG(table->signature, ACPI_SIG_OSDT) && pass_number == ACPI_IMODE_LOAD_PASS1) { walk_state->namespace_override = TRUE; } diff --git a/drivers/acpi/acpica/nsrepair.c b/drivers/acpi/acpica/nsrepair.c index 0aacfa48e20d..be86fea8e4d4 100644 --- a/drivers/acpi/acpica/nsrepair.c +++ b/drivers/acpi/acpica/nsrepair.c @@ -316,7 +316,7 @@ static const struct acpi_simple_repair_info *acpi_ns_match_simple_repair(struct this_name = acpi_object_repair_info; while (this_name->object_converter) { - if (ACPI_COMPARE_NAME(node->name.ascii, this_name->name)) { + if (ACPI_COMPARE_NAMESEG(node->name.ascii, this_name->name)) { /* Check if we can actually repair this name/type combination */ diff --git a/drivers/acpi/acpica/nsrepair2.c b/drivers/acpi/acpica/nsrepair2.c index d5804a6d1d65..8d776256b213 100644 --- a/drivers/acpi/acpica/nsrepair2.c +++ b/drivers/acpi/acpica/nsrepair2.c @@ -25,7 +25,7 @@ acpi_status (*acpi_repair_function) (struct acpi_evaluate_info * info, return_object_ptr); typedef struct acpi_repair_info { - char name[ACPI_NAME_SIZE]; + char name[ACPI_NAMESEG_SIZE]; acpi_repair_function repair_function; } acpi_repair_info; @@ -188,7 +188,7 @@ static const struct acpi_repair_info *acpi_ns_match_complex_repair(struct this_name = acpi_ns_repairable_names; while (this_name->repair_function) { - if (ACPI_COMPARE_NAME(node->name.ascii, this_name->name)) { + if (ACPI_COMPARE_NAMESEG(node->name.ascii, this_name->name)) { return (this_name); } diff --git a/drivers/acpi/acpica/nsutils.c b/drivers/acpi/acpica/nsutils.c index e5cef1edf49f..6bc90d46db5c 100644 --- a/drivers/acpi/acpica/nsutils.c +++ b/drivers/acpi/acpica/nsutils.c @@ -178,7 +178,7 @@ void acpi_ns_get_internal_name_length(struct acpi_namestring_info *info) } } - info->length = (ACPI_NAME_SIZE * info->num_segments) + + info->length = (ACPI_NAMESEG_SIZE * info->num_segments) + 4 + info->num_carats; info->next_external_char = next_external_char; @@ -249,7 +249,7 @@ acpi_status acpi_ns_build_internal_name(struct acpi_namestring_info *info) /* Build the name (minus path separators) */ for (; num_segments; num_segments--) { - for (i = 0; i < ACPI_NAME_SIZE; i++) { + for (i = 0; i < ACPI_NAMESEG_SIZE; i++) { if (ACPI_IS_PATH_SEPARATOR(*external_name) || (*external_name == 0)) { @@ -274,7 +274,7 @@ acpi_status acpi_ns_build_internal_name(struct acpi_namestring_info *info) /* Move on the next segment */ external_name++; - result += ACPI_NAME_SIZE; + result += ACPI_NAMESEG_SIZE; } /* Terminate the string */ @@ -489,12 +489,12 @@ acpi_ns_externalize_name(u32 internal_name_length, /* Copy and validate the 4-char name segment */ - ACPI_MOVE_NAME(&(*converted_name)[j], - &internal_name[names_index]); + ACPI_COPY_NAMESEG(&(*converted_name)[j], + &internal_name[names_index]); acpi_ut_repair_name(&(*converted_name)[j]); - j += ACPI_NAME_SIZE; - names_index += ACPI_NAME_SIZE; + j += ACPI_NAMESEG_SIZE; + names_index += ACPI_NAMESEG_SIZE; } } diff --git a/drivers/acpi/acpica/nsxfname.c b/drivers/acpi/acpica/nsxfname.c index de2d3135d6a9..55b4a5b3331f 100644 --- a/drivers/acpi/acpica/nsxfname.c +++ b/drivers/acpi/acpica/nsxfname.c @@ -495,8 +495,8 @@ acpi_status acpi_install_method(u8 *buffer) /* Table must be a DSDT or SSDT */ - if (!ACPI_COMPARE_NAME(table->signature, ACPI_SIG_DSDT) && - !ACPI_COMPARE_NAME(table->signature, ACPI_SIG_SSDT)) { + if (!ACPI_COMPARE_NAMESEG(table->signature, ACPI_SIG_DSDT) && + !ACPI_COMPARE_NAMESEG(table->signature, ACPI_SIG_SSDT)) { return (AE_BAD_HEADER); } diff --git a/drivers/acpi/acpica/psargs.c b/drivers/acpi/acpica/psargs.c index 9d9d442cd999..e62c7897fdf1 100644 --- a/drivers/acpi/acpica/psargs.c +++ b/drivers/acpi/acpica/psargs.c @@ -150,21 +150,21 @@ char *acpi_ps_get_next_namestring(struct acpi_parse_state *parser_state) /* Two name segments */ - end += 1 + (2 * ACPI_NAME_SIZE); + end += 1 + (2 * ACPI_NAMESEG_SIZE); break; case AML_MULTI_NAME_PREFIX: /* Multiple name segments, 4 chars each, count in next byte */ - end += 2 + (*(end + 1) * ACPI_NAME_SIZE); + end += 2 + (*(end + 1) * ACPI_NAMESEG_SIZE); break; default: /* Single name segment */ - end += ACPI_NAME_SIZE; + end += ACPI_NAMESEG_SIZE; break; } @@ -522,7 +522,7 @@ static union acpi_parse_object *acpi_ps_get_next_field(struct acpi_parse_state ACPI_MOVE_32_TO_32(&name, parser_state->aml); acpi_ps_set_name(field, name); - parser_state->aml += ACPI_NAME_SIZE; + parser_state->aml += ACPI_NAMESEG_SIZE; ASL_CV_CAPTURE_COMMENTS_ONLY(parser_state); diff --git a/drivers/acpi/acpica/rsxface.c b/drivers/acpi/acpica/rsxface.c index 1d6f136e4068..c62be3d91712 100644 --- a/drivers/acpi/acpica/rsxface.c +++ b/drivers/acpi/acpica/rsxface.c @@ -603,10 +603,10 @@ acpi_walk_resources(acpi_handle device_handle, /* Parameter validation */ if (!device_handle || !user_function || !name || - (!ACPI_COMPARE_NAME(name, METHOD_NAME__CRS) && - !ACPI_COMPARE_NAME(name, METHOD_NAME__PRS) && - !ACPI_COMPARE_NAME(name, METHOD_NAME__AEI) && - !ACPI_COMPARE_NAME(name, METHOD_NAME__DMA))) { + (!ACPI_COMPARE_NAMESEG(name, METHOD_NAME__CRS) && + !ACPI_COMPARE_NAMESEG(name, METHOD_NAME__PRS) && + !ACPI_COMPARE_NAMESEG(name, METHOD_NAME__AEI) && + !ACPI_COMPARE_NAMESEG(name, METHOD_NAME__DMA))) { return_ACPI_STATUS(AE_BAD_PARAMETER); } diff --git a/drivers/acpi/acpica/tbdata.c b/drivers/acpi/acpica/tbdata.c index 0cecd0039acf..933f81316ad2 100644 --- a/drivers/acpi/acpica/tbdata.c +++ b/drivers/acpi/acpica/tbdata.c @@ -480,7 +480,8 @@ acpi_tb_verify_temp_table(struct acpi_table_desc *table_desc, /* If a particular signature is expected (DSDT/FACS), it must match */ - if (signature && !ACPI_COMPARE_NAME(&table_desc->signature, signature)) { + if (signature && + !ACPI_COMPARE_NAMESEG(&table_desc->signature, signature)) { ACPI_BIOS_ERROR((AE_INFO, "Invalid signature 0x%X for ACPI table, expected [%s]", table_desc->signature.integer, signature)); diff --git a/drivers/acpi/acpica/tbfind.c b/drivers/acpi/acpica/tbfind.c index 951bd8e1c50a..b2abb40023a6 100644 --- a/drivers/acpi/acpica/tbfind.c +++ b/drivers/acpi/acpica/tbfind.c @@ -56,7 +56,7 @@ acpi_tb_find_table(char *signature, /* Normalize the input strings */ memset(&header, 0, sizeof(struct acpi_table_header)); - ACPI_MOVE_NAME(header.signature, signature); + ACPI_COPY_NAMESEG(header.signature, signature); strncpy(header.oem_id, oem_id, ACPI_OEM_ID_SIZE); strncpy(header.oem_table_id, oem_table_id, ACPI_OEM_TABLE_ID_SIZE); @@ -65,7 +65,7 @@ acpi_tb_find_table(char *signature, (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES); for (i = 0; i < acpi_gbl_root_table_list.current_table_count; ++i) { if (memcmp(&(acpi_gbl_root_table_list.tables[i].signature), - header.signature, ACPI_NAME_SIZE)) { + header.signature, ACPI_NAMESEG_SIZE)) { /* Not the requested table */ @@ -94,14 +94,14 @@ acpi_tb_find_table(char *signature, if (!memcmp (acpi_gbl_root_table_list.tables[i].pointer->signature, - header.signature, ACPI_NAME_SIZE) && (!oem_id[0] - || - !memcmp - (acpi_gbl_root_table_list. - tables[i].pointer-> - oem_id, - header.oem_id, - ACPI_OEM_ID_SIZE)) + header.signature, ACPI_NAMESEG_SIZE) && (!oem_id[0] + || + !memcmp + (acpi_gbl_root_table_list. + tables[i]. + pointer->oem_id, + header.oem_id, + ACPI_OEM_ID_SIZE)) && (!oem_table_id[0] || !memcmp(acpi_gbl_root_table_list.tables[i].pointer-> oem_table_id, header.oem_table_id, diff --git a/drivers/acpi/acpica/tbinstal.c b/drivers/acpi/acpica/tbinstal.c index be6642bf6366..ef1ffd36ab3f 100644 --- a/drivers/acpi/acpica/tbinstal.c +++ b/drivers/acpi/acpica/tbinstal.c @@ -120,7 +120,7 @@ acpi_tb_install_standard_table(acpi_physical_address address, */ if (!reload && acpi_gbl_disable_ssdt_table_install && - ACPI_COMPARE_NAME(&new_table_desc.signature, ACPI_SIG_SSDT)) { + ACPI_COMPARE_NAMESEG(&new_table_desc.signature, ACPI_SIG_SSDT)) { ACPI_INFO(("Ignoring installation of %4.4s at %8.8X%8.8X", new_table_desc.signature.ascii, ACPI_FORMAT_UINT64(address))); diff --git a/drivers/acpi/acpica/tbprint.c b/drivers/acpi/acpica/tbprint.c index 9b5df95d881b..4764f849cb78 100644 --- a/drivers/acpi/acpica/tbprint.c +++ b/drivers/acpi/acpica/tbprint.c @@ -69,10 +69,10 @@ acpi_tb_cleanup_table_header(struct acpi_table_header *out_header, memcpy(out_header, header, sizeof(struct acpi_table_header)); - acpi_tb_fix_string(out_header->signature, ACPI_NAME_SIZE); + acpi_tb_fix_string(out_header->signature, ACPI_NAMESEG_SIZE); acpi_tb_fix_string(out_header->oem_id, ACPI_OEM_ID_SIZE); acpi_tb_fix_string(out_header->oem_table_id, ACPI_OEM_TABLE_ID_SIZE); - acpi_tb_fix_string(out_header->asl_compiler_id, ACPI_NAME_SIZE); + acpi_tb_fix_string(out_header->asl_compiler_id, ACPI_NAMESEG_SIZE); } /******************************************************************************* @@ -94,7 +94,7 @@ acpi_tb_print_table_header(acpi_physical_address address, { struct acpi_table_header local_header; - if (ACPI_COMPARE_NAME(header->signature, ACPI_SIG_FACS)) { + if (ACPI_COMPARE_NAMESEG(header->signature, ACPI_SIG_FACS)) { /* FACS only has signature and length fields */ @@ -158,8 +158,8 @@ acpi_status acpi_tb_verify_checksum(struct acpi_table_header *table, u32 length) * They are the odd tables, have no standard ACPI header and no checksum */ - if (ACPI_COMPARE_NAME(table->signature, ACPI_SIG_S3PT) || - ACPI_COMPARE_NAME(table->signature, ACPI_SIG_FACS)) { + if (ACPI_COMPARE_NAMESEG(table->signature, ACPI_SIG_S3PT) || + ACPI_COMPARE_NAMESEG(table->signature, ACPI_SIG_FACS)) { return (AE_OK); } diff --git a/drivers/acpi/acpica/tbutils.c b/drivers/acpi/acpica/tbutils.c index 2469e01310e2..c5f0b8ec70cc 100644 --- a/drivers/acpi/acpica/tbutils.c +++ b/drivers/acpi/acpica/tbutils.c @@ -332,9 +332,9 @@ acpi_tb_parse_root_table(acpi_physical_address rsdp_address) &table_index); if (ACPI_SUCCESS(status) && - ACPI_COMPARE_NAME(&acpi_gbl_root_table_list. - tables[table_index].signature, - ACPI_SIG_FADT)) { + ACPI_COMPARE_NAMESEG(&acpi_gbl_root_table_list. + tables[table_index].signature, + ACPI_SIG_FADT)) { acpi_gbl_fadt_index = table_index; acpi_tb_parse_fadt(); } diff --git a/drivers/acpi/acpica/tbxface.c b/drivers/acpi/acpica/tbxface.c index 36592888f0e7..1640685bf4ae 100644 --- a/drivers/acpi/acpica/tbxface.c +++ b/drivers/acpi/acpica/tbxface.c @@ -230,7 +230,7 @@ acpi_get_table_header(char *signature, for (i = 0, j = 0; i < acpi_gbl_root_table_list.current_table_count; i++) { - if (!ACPI_COMPARE_NAME + if (!ACPI_COMPARE_NAMESEG (&(acpi_gbl_root_table_list.tables[i].signature), signature)) { continue; @@ -323,7 +323,7 @@ acpi_get_table(char *signature, i++) { table_desc = &acpi_gbl_root_table_list.tables[i]; - if (!ACPI_COMPARE_NAME(&table_desc->signature, signature)) { + if (!ACPI_COMPARE_NAMESEG(&table_desc->signature, signature)) { continue; } diff --git a/drivers/acpi/acpica/tbxfload.c b/drivers/acpi/acpica/tbxfload.c index 1a2592cc3245..4f30f06a6f78 100644 --- a/drivers/acpi/acpica/tbxfload.c +++ b/drivers/acpi/acpica/tbxfload.c @@ -118,7 +118,7 @@ acpi_status acpi_tb_load_namespace(void) table = &acpi_gbl_root_table_list.tables[acpi_gbl_dsdt_index]; if (!acpi_gbl_root_table_list.current_table_count || - !ACPI_COMPARE_NAME(table->signature.ascii, ACPI_SIG_DSDT) || + !ACPI_COMPARE_NAMESEG(table->signature.ascii, ACPI_SIG_DSDT) || ACPI_FAILURE(acpi_tb_validate_table(table))) { status = AE_NO_ACPI_TABLES; goto unlock_and_exit; @@ -170,11 +170,12 @@ acpi_status acpi_tb_load_namespace(void) table = &acpi_gbl_root_table_list.tables[i]; if (!table->address || - (!ACPI_COMPARE_NAME(table->signature.ascii, ACPI_SIG_SSDT) - && !ACPI_COMPARE_NAME(table->signature.ascii, - ACPI_SIG_PSDT) - && !ACPI_COMPARE_NAME(table->signature.ascii, - ACPI_SIG_OSDT)) + (!ACPI_COMPARE_NAMESEG + (table->signature.ascii, ACPI_SIG_SSDT) + && !ACPI_COMPARE_NAMESEG(table->signature.ascii, + ACPI_SIG_PSDT) + && !ACPI_COMPARE_NAMESEG(table->signature.ascii, + ACPI_SIG_OSDT)) || ACPI_FAILURE(acpi_tb_validate_table(table))) { continue; } @@ -364,7 +365,7 @@ acpi_status acpi_unload_parent_table(acpi_handle object) * only these types can contain AML and thus are the only types * that can create namespace objects. */ - if (ACPI_COMPARE_NAME + if (ACPI_COMPARE_NAMESEG (acpi_gbl_root_table_list.tables[i].signature.ascii, ACPI_SIG_DSDT)) { status = AE_TYPE; diff --git a/drivers/acpi/acpica/utascii.c b/drivers/acpi/acpica/utascii.c index 79d7426fd7bf..f6cd7d4f698b 100644 --- a/drivers/acpi/acpica/utascii.c +++ b/drivers/acpi/acpica/utascii.c @@ -30,7 +30,7 @@ u8 acpi_ut_valid_nameseg(char *name) /* Validate each character in the signature */ - for (i = 0; i < ACPI_NAME_SIZE; i++) { + for (i = 0; i < ACPI_NAMESEG_SIZE; i++) { if (!acpi_ut_valid_name_char(name[i], i)) { return (FALSE); } diff --git a/drivers/acpi/acpica/utdecode.c b/drivers/acpi/acpica/utdecode.c index ad9f77eb554f..65beaa237669 100644 --- a/drivers/acpi/acpica/utdecode.c +++ b/drivers/acpi/acpica/utdecode.c @@ -78,7 +78,7 @@ const char *acpi_gbl_region_types[ACPI_NUM_PREDEFINED_REGIONS] = { "IPMI", /* 0x07 */ "GeneralPurposeIo", /* 0x08 */ "GenericSerialBus", /* 0x09 */ - "PCC" /* 0x0A */ + "PlatformCommChannel" /* 0x0A */ }; const char *acpi_ut_get_region_name(u8 space_id) @@ -239,7 +239,7 @@ const char *acpi_ut_get_node_name(void *object) { struct acpi_namespace_node *node = (struct acpi_namespace_node *)object; - /* Must return a string of exactly 4 characters == ACPI_NAME_SIZE */ + /* Must return a string of exactly 4 characters == ACPI_NAMESEG_SIZE */ if (!object) { return ("NULL"); diff --git a/drivers/acpi/acpica/utmisc.c b/drivers/acpi/acpica/utmisc.c index afaadc73196b..8638efacdbf4 100644 --- a/drivers/acpi/acpica/utmisc.c +++ b/drivers/acpi/acpica/utmisc.c @@ -59,10 +59,10 @@ u8 acpi_ut_is_aml_table(struct acpi_table_header *table) /* These are the only tables that contain executable AML */ - if (ACPI_COMPARE_NAME(table->signature, ACPI_SIG_DSDT) || - ACPI_COMPARE_NAME(table->signature, ACPI_SIG_PSDT) || - ACPI_COMPARE_NAME(table->signature, ACPI_SIG_SSDT) || - ACPI_COMPARE_NAME(table->signature, ACPI_SIG_OSDT) || + if (ACPI_COMPARE_NAMESEG(table->signature, ACPI_SIG_DSDT) || + ACPI_COMPARE_NAMESEG(table->signature, ACPI_SIG_PSDT) || + ACPI_COMPARE_NAMESEG(table->signature, ACPI_SIG_SSDT) || + ACPI_COMPARE_NAMESEG(table->signature, ACPI_SIG_OSDT) || ACPI_IS_OEM_SIG(table->signature)) { return (TRUE); } diff --git a/drivers/acpi/acpica/utpredef.c b/drivers/acpi/acpica/utpredef.c index a9f08f43c685..1b0f68f5ed8c 100644 --- a/drivers/acpi/acpica/utpredef.c +++ b/drivers/acpi/acpica/utpredef.c @@ -84,7 +84,7 @@ const union acpi_predefined_info *acpi_ut_match_predefined_method(char *name) this_name = acpi_gbl_predefined_methods; while (this_name->info.name[0]) { - if (ACPI_COMPARE_NAME(name, this_name->info.name)) { + if (ACPI_COMPARE_NAMESEG(name, this_name->info.name)) { return (this_name); } @@ -201,7 +201,7 @@ const union acpi_predefined_info *acpi_ut_match_resource_name(char *name) this_name = acpi_gbl_resource_names; while (this_name->info.name[0]) { - if (ACPI_COMPARE_NAME(name, this_name->info.name)) { + if (ACPI_COMPARE_NAMESEG(name, this_name->info.name)) { return (this_name); } diff --git a/drivers/acpi/acpica/utstring.c b/drivers/acpi/acpica/utstring.c index 5bef0b059406..c39b5483045d 100644 --- a/drivers/acpi/acpica/utstring.c +++ b/drivers/acpi/acpica/utstring.c @@ -141,15 +141,15 @@ void acpi_ut_repair_name(char *name) * Special case for the root node. This can happen if we get an * error during the execution of module-level code. */ - if (ACPI_COMPARE_NAME(name, ACPI_ROOT_PATHNAME)) { + if (ACPI_COMPARE_NAMESEG(name, ACPI_ROOT_PATHNAME)) { return; } - ACPI_MOVE_NAME(&original_name, name); + ACPI_COPY_NAMESEG(&original_name, name); /* Check each character in the name */ - for (i = 0; i < ACPI_NAME_SIZE; i++) { + for (i = 0; i < ACPI_NAMESEG_SIZE; i++) { if (acpi_ut_valid_name_char(name[i], i)) { continue; } diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index a19ff3977ac4..623998a8d722 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -456,8 +456,11 @@ static int acpi_button_resume(struct device *dev) struct acpi_button *button = acpi_driver_data(device); button->suspended = false; - if (button->type == ACPI_BUTTON_TYPE_LID && button->input->users) + if (button->type == ACPI_BUTTON_TYPE_LID && button->input->users) { + button->last_state = !!acpi_lid_evaluate_state(device); + button->last_time = ktime_get(); acpi_lid_initialize_state(device); + } return 0; } #endif diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c index d4244e7d0e38..653642a4cbdd 100644 --- a/drivers/acpi/cppc_acpi.c +++ b/drivers/acpi/cppc_acpi.c @@ -81,9 +81,9 @@ struct cppc_pcc_data { int refcount; }; -/* Array to represent the PCC channel per subspace id */ +/* Array to represent the PCC channel per subspace ID */ static struct cppc_pcc_data *pcc_data[MAX_PCC_SUBSPACES]; -/* The cpu_pcc_subspace_idx containsper CPU subspace id */ +/* The cpu_pcc_subspace_idx contains per CPU subspace ID */ static DEFINE_PER_CPU(int, cpu_pcc_subspace_idx); /* @@ -436,7 +436,7 @@ int acpi_get_psd_map(struct cppc_cpudata **all_cpu_data) return -ENOMEM; /* - * Now that we have _PSD data from all CPUs, lets setup P-state + * Now that we have _PSD data from all CPUs, let's setup P-state * domain info. */ for_each_possible_cpu(i) { @@ -588,7 +588,7 @@ static int register_pcc_channel(int pcc_ss_idx) return -ENOMEM; } - /* Set flag so that we dont come here for each CPU. */ + /* Set flag so that we don't come here for each CPU. */ pcc_data[pcc_ss_idx]->pcc_channel_acquired = true; } @@ -613,7 +613,7 @@ bool __weak cpc_ffh_supported(void) * * Check and allocate the cppc_pcc_data memory. * In some processor configurations it is possible that same subspace - * is shared between multiple CPU's. This is seen especially in CPU's + * is shared between multiple CPUs. This is seen especially in CPUs * with hardware multi-threading support. * * Return: 0 for success, errno for failure @@ -711,7 +711,7 @@ static bool is_cppc_supported(int revision, int num_ent) /** * acpi_cppc_processor_probe - Search for per CPU _CPC objects. - * @pr: Ptr to acpi_processor containing this CPUs logical Id. + * @pr: Ptr to acpi_processor containing this CPU's logical ID. * * Return: 0 for success or negative value for err. */ @@ -728,7 +728,7 @@ int acpi_cppc_processor_probe(struct acpi_processor *pr) acpi_status status; int ret = -EFAULT; - /* Parse the ACPI _CPC table for this cpu. */ + /* Parse the ACPI _CPC table for this CPU. */ status = acpi_evaluate_object_typed(handle, "_CPC", NULL, &output, ACPI_TYPE_PACKAGE); if (ACPI_FAILURE(status)) { @@ -840,7 +840,7 @@ int acpi_cppc_processor_probe(struct acpi_processor *pr) if (ret) goto out_free; - /* Register PCC channel once for all PCC subspace id. */ + /* Register PCC channel once for all PCC subspace ID. */ if (pcc_subspace_id >= 0 && !pcc_data[pcc_subspace_id]->pcc_channel_acquired) { ret = register_pcc_channel(pcc_subspace_id); if (ret) @@ -860,7 +860,7 @@ int acpi_cppc_processor_probe(struct acpi_processor *pr) goto out_free; } - /* Plug PSD data into this CPUs CPC descriptor. */ + /* Plug PSD data into this CPU's CPC descriptor. */ per_cpu(cpc_desc_ptr, pr->id) = cpc_ptr; ret = kobject_init_and_add(&cpc_ptr->kobj, &cppc_ktype, &cpu_dev->kobj, @@ -891,7 +891,7 @@ EXPORT_SYMBOL_GPL(acpi_cppc_processor_probe); /** * acpi_cppc_processor_exit - Cleanup CPC structs. - * @pr: Ptr to acpi_processor containing this CPUs logical Id. + * @pr: Ptr to acpi_processor containing this CPU's logical ID. * * Return: Void */ @@ -931,7 +931,7 @@ EXPORT_SYMBOL_GPL(acpi_cppc_processor_exit); /** * cpc_read_ffh() - Read FFH register - * @cpunum: cpu number to read + * @cpunum: CPU number to read * @reg: cppc register information * @val: place holder for return value * @@ -946,7 +946,7 @@ int __weak cpc_read_ffh(int cpunum, struct cpc_reg *reg, u64 *val) /** * cpc_write_ffh() - Write FFH register - * @cpunum: cpu number to write + * @cpunum: CPU number to write * @reg: cppc register information * @val: value to write * @@ -1093,7 +1093,7 @@ int cppc_get_desired_perf(int cpunum, u64 *desired_perf) EXPORT_SYMBOL_GPL(cppc_get_desired_perf); /** - * cppc_get_perf_caps - Get a CPUs performance capabilities. + * cppc_get_perf_caps - Get a CPU's performance capabilities. * @cpunum: CPU from which to get capabilities info. * @perf_caps: ptr to cppc_perf_caps. See cppc_acpi.h * @@ -1183,7 +1183,7 @@ out_err: EXPORT_SYMBOL_GPL(cppc_get_perf_caps); /** - * cppc_get_perf_ctrs - Read a CPUs performance feedback counters. + * cppc_get_perf_ctrs - Read a CPU's performance feedback counters. * @cpunum: CPU from which to read counters. * @perf_fb_ctrs: ptr to cppc_perf_fb_ctrs. See cppc_acpi.h * @@ -1210,7 +1210,7 @@ int cppc_get_perf_ctrs(int cpunum, struct cppc_perf_fb_ctrs *perf_fb_ctrs) ctr_wrap_reg = &cpc_desc->cpc_regs[CTR_WRAP_TIME]; /* - * If refernce perf register is not supported then we should + * If reference perf register is not supported then we should * use the nominal perf value */ if (!CPC_SUPPORTED(ref_perf_reg)) @@ -1263,7 +1263,7 @@ out_err: EXPORT_SYMBOL_GPL(cppc_get_perf_ctrs); /** - * cppc_set_perf - Set a CPUs performance controls. + * cppc_set_perf - Set a CPU's performance controls. * @cpu: CPU for which to set performance controls. * @perf_ctrls: ptr to cppc_perf_ctrls. See cppc_acpi.h * @@ -1344,7 +1344,7 @@ int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls) * executing the Phase-II. * 2. Some other CPU has beaten this CPU to successfully execute the * write_trylock and has already acquired the write_lock. We know for a - * fact it(other CPU acquiring the write_lock) couldn't have happened + * fact it (other CPU acquiring the write_lock) couldn't have happened * before this CPU's Phase-I as we held the read_lock. * 3. Some other CPU executing pcc CMD_READ has stolen the * down_write, in which case, send_pcc_cmd will check for pending diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c index 824ae985ad93..5b50f884712c 100644 --- a/drivers/acpi/device_pm.c +++ b/drivers/acpi/device_pm.c @@ -728,6 +728,9 @@ static int __acpi_device_wakeup_enable(struct acpi_device *adev, goto out; } + acpi_handle_debug(adev->handle, "GPE%2X enabled for wakeup\n", + (unsigned int)wakeup->gpe_number); + inc: wakeup->enable_count++; diff --git a/drivers/acpi/dptf/dptf_power.c b/drivers/acpi/dptf/dptf_power.c index e1c242568341..0c081390930a 100644 --- a/drivers/acpi/dptf/dptf_power.c +++ b/drivers/acpi/dptf/dptf_power.c @@ -31,8 +31,7 @@ static ssize_t name##_show(struct device *dev,\ struct device_attribute *attr,\ char *buf)\ {\ - struct platform_device *pdev = to_platform_device(dev);\ - struct acpi_device *acpi_dev = platform_get_drvdata(pdev);\ + struct acpi_device *acpi_dev = dev_get_drvdata(dev);\ unsigned long long val;\ acpi_status status;\ \ diff --git a/drivers/acpi/event.c b/drivers/acpi/event.c index 5a127f3f2d5c..47f21599f2ab 100644 --- a/drivers/acpi/event.c +++ b/drivers/acpi/event.c @@ -131,8 +131,8 @@ int acpi_bus_generate_netlink_event(const char *device_class, event = nla_data(attr); memset(event, 0, sizeof(struct acpi_genl_event)); - strcpy(event->device_class, device_class); - strcpy(event->bus_id, bus_id); + strscpy(event->device_class, device_class, sizeof(event->device_class)); + strscpy(event->bus_id, bus_id, sizeof(event->bus_id)); event->type = type; event->data = data; diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index 665e93ca0b40..87db3e124725 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -535,12 +535,12 @@ int acpi_device_sleep_wake(struct acpi_device *dev, /* * Try to execute _DSW first. * - * Three agruments are needed for the _DSW object: + * Three arguments are needed for the _DSW object: * Argument 0: enable/disable the wake capabilities * Argument 1: target system state * Argument 2: target device state * When _DSW object is called to disable the wake capabilities, maybe - * the first argument is filled. The values of the other two agruments + * the first argument is filled. The values of the other two arguments * are meaningless. */ in_arg[0].type = ACPI_TYPE_INTEGER; diff --git a/drivers/acpi/pptt.c b/drivers/acpi/pptt.c index 065c4fc245d1..b72e6afaa8fb 100644 --- a/drivers/acpi/pptt.c +++ b/drivers/acpi/pptt.c @@ -164,7 +164,7 @@ static struct acpi_pptt_cache *acpi_find_cache_level(struct acpi_table_header *t } /** - * acpi_count_levels() - Given a PPTT table, and a cpu node, count the caches + * acpi_count_levels() - Given a PPTT table, and a CPU node, count the caches * @table_hdr: Pointer to the head of the PPTT table * @cpu_node: processor node we wish to count caches for * @@ -235,7 +235,7 @@ static int acpi_pptt_leaf_node(struct acpi_table_header *table_hdr, /** * acpi_find_processor_node() - Given a PPTT table find the requested processor * @table_hdr: Pointer to the head of the PPTT table - * @acpi_cpu_id: cpu we are searching for + * @acpi_cpu_id: CPU we are searching for * * Find the subtable entry describing the provided processor. * This is done by iterating the PPTT table looking for processor nodes @@ -456,21 +456,21 @@ static struct acpi_pptt_processor *acpi_find_processor_package_id(struct acpi_ta static void acpi_pptt_warn_missing(void) { - pr_warn_once("No PPTT table found, cpu and cache topology may be inaccurate\n"); + pr_warn_once("No PPTT table found, CPU and cache topology may be inaccurate\n"); } /** * topology_get_acpi_cpu_tag() - Find a unique topology value for a feature * @table: Pointer to the head of the PPTT table - * @cpu: Kernel logical cpu number + * @cpu: Kernel logical CPU number * @level: A level that terminates the search * @flag: A flag which terminates the search * - * Get a unique value given a cpu, and a topology level, that can be + * Get a unique value given a CPU, and a topology level, that can be * matched to determine which cpus share common topological features * at that level. * - * Return: Unique value, or -ENOENT if unable to locate cpu + * Return: Unique value, or -ENOENT if unable to locate CPU */ static int topology_get_acpi_cpu_tag(struct acpi_table_header *table, unsigned int cpu, int level, int flag) @@ -510,7 +510,7 @@ static int find_acpi_cpu_topology_tag(unsigned int cpu, int level, int flag) return -ENOENT; } retval = topology_get_acpi_cpu_tag(table, cpu, level, flag); - pr_debug("Topology Setup ACPI cpu %d, level %d ret = %d\n", + pr_debug("Topology Setup ACPI CPU %d, level %d ret = %d\n", cpu, level, retval); acpi_put_table(table); @@ -519,9 +519,9 @@ static int find_acpi_cpu_topology_tag(unsigned int cpu, int level, int flag) /** * acpi_find_last_cache_level() - Determines the number of cache levels for a PE - * @cpu: Kernel logical cpu number + * @cpu: Kernel logical CPU number * - * Given a logical cpu number, returns the number of levels of cache represented + * Given a logical CPU number, returns the number of levels of cache represented * in the PPTT. Errors caused by lack of a PPTT table, or otherwise, return 0 * indicating we didn't find any cache levels. * @@ -534,7 +534,7 @@ int acpi_find_last_cache_level(unsigned int cpu) int number_of_levels = 0; acpi_status status; - pr_debug("Cache Setup find last level cpu=%d\n", cpu); + pr_debug("Cache Setup find last level CPU=%d\n", cpu); acpi_cpu_id = get_acpi_id_for_cpu(cpu); status = acpi_get_table(ACPI_SIG_PPTT, 0, &table); @@ -551,14 +551,14 @@ int acpi_find_last_cache_level(unsigned int cpu) /** * cache_setup_acpi() - Override CPU cache topology with data from the PPTT - * @cpu: Kernel logical cpu number + * @cpu: Kernel logical CPU number * * Updates the global cache info provided by cpu_get_cacheinfo() * when there are valid properties in the acpi_pptt_cache nodes. A * successful parse may not result in any updates if none of the - * cache levels have any valid flags set. Futher, a unique value is + * cache levels have any valid flags set. Further, a unique value is * associated with each known CPU cache entry. This unique value - * can be used to determine whether caches are shared between cpus. + * can be used to determine whether caches are shared between CPUs. * * Return: -ENOENT on failure to find table, or 0 on success */ @@ -567,7 +567,7 @@ int cache_setup_acpi(unsigned int cpu) struct acpi_table_header *table; acpi_status status; - pr_debug("Cache Setup ACPI cpu %d\n", cpu); + pr_debug("Cache Setup ACPI CPU %d\n", cpu); status = acpi_get_table(ACPI_SIG_PPTT, 0, &table); if (ACPI_FAILURE(status)) { @@ -582,8 +582,8 @@ int cache_setup_acpi(unsigned int cpu) } /** - * find_acpi_cpu_topology() - Determine a unique topology value for a given cpu - * @cpu: Kernel logical cpu number + * find_acpi_cpu_topology() - Determine a unique topology value for a given CPU + * @cpu: Kernel logical CPU number * @level: The topological level for which we would like a unique ID * * Determine a topology unique ID for each thread/core/cluster/mc_grouping @@ -596,7 +596,7 @@ int cache_setup_acpi(unsigned int cpu) * other levels beyond this use a generated value to uniquely identify * a topological feature. * - * Return: -ENOENT if the PPTT doesn't exist, or the cpu cannot be found. + * Return: -ENOENT if the PPTT doesn't exist, or the CPU cannot be found. * Otherwise returns a value which represents a unique topological feature. */ int find_acpi_cpu_topology(unsigned int cpu, int level) @@ -606,12 +606,12 @@ int find_acpi_cpu_topology(unsigned int cpu, int level) /** * find_acpi_cpu_cache_topology() - Determine a unique cache topology value - * @cpu: Kernel logical cpu number + * @cpu: Kernel logical CPU number * @level: The cache level for which we would like a unique ID * * Determine a unique ID for each unified cache in the system * - * Return: -ENOENT if the PPTT doesn't exist, or the cpu cannot be found. + * Return: -ENOENT if the PPTT doesn't exist, or the CPU cannot be found. * Otherwise returns a value which represents a unique topological feature. */ int find_acpi_cpu_cache_topology(unsigned int cpu, int level) @@ -643,17 +643,17 @@ int find_acpi_cpu_cache_topology(unsigned int cpu, int level) /** - * find_acpi_cpu_topology_package() - Determine a unique cpu package value - * @cpu: Kernel logical cpu number + * find_acpi_cpu_topology_package() - Determine a unique CPU package value + * @cpu: Kernel logical CPU number * - * Determine a topology unique package ID for the given cpu. + * Determine a topology unique package ID for the given CPU. * This ID can then be used to group peers, which will have matching ids. * * The search terminates when either a level is found with the PHYSICAL_PACKAGE * flag set or we reach a root node. * - * Return: -ENOENT if the PPTT doesn't exist, or the cpu cannot be found. - * Otherwise returns a value which represents the package for this cpu. + * Return: -ENOENT if the PPTT doesn't exist, or the CPU cannot be found. + * Otherwise returns a value which represents the package for this CPU. */ int find_acpi_cpu_topology_package(unsigned int cpu) { diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 446c959a8f08..b845dc3e0ba9 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -763,18 +763,16 @@ acpi_bus_get_ejd(acpi_handle handle, acpi_handle *ejd) } EXPORT_SYMBOL_GPL(acpi_bus_get_ejd); -static int acpi_bus_extract_wakeup_device_power_package(acpi_handle handle, - struct acpi_device_wakeup *wakeup) +static int acpi_bus_extract_wakeup_device_power_package(struct acpi_device *dev) { + acpi_handle handle = dev->handle; + struct acpi_device_wakeup *wakeup = &dev->wakeup; struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; union acpi_object *package = NULL; union acpi_object *element = NULL; acpi_status status; int err = -ENODATA; - if (!wakeup) - return -EINVAL; - INIT_LIST_HEAD(&wakeup->resources); /* _PRW */ @@ -848,9 +846,9 @@ static int acpi_bus_extract_wakeup_device_power_package(acpi_handle handle, static bool acpi_wakeup_gpe_init(struct acpi_device *device) { static const struct acpi_device_id button_device_ids[] = { - {"PNP0C0C", 0}, - {"PNP0C0D", 0}, - {"PNP0C0E", 0}, + {"PNP0C0C", 0}, /* Power button */ + {"PNP0C0D", 0}, /* Lid */ + {"PNP0C0E", 0}, /* Sleep button */ {"", 0}, }; struct acpi_device_wakeup *wakeup = &device->wakeup; @@ -883,8 +881,7 @@ static void acpi_bus_get_wakeup_device_flags(struct acpi_device *device) if (!acpi_has_method(device->handle, "_PRW")) return; - err = acpi_bus_extract_wakeup_device_power_package(device->handle, - &device->wakeup); + err = acpi_bus_extract_wakeup_device_power_package(device); if (err) { dev_err(&device->dev, "_PRW evaluation error: %d\n", err); return; @@ -895,7 +892,7 @@ static void acpi_bus_get_wakeup_device_flags(struct acpi_device *device) /* * Call _PSW/_DSW object to disable its ability to wake the sleeping * system for the ACPI device with the _PRW object. - * The _PSW object is depreciated in ACPI 3.0 and is replaced by _DSW. + * The _PSW object is deprecated in ACPI 3.0 and is replaced by _DSW. * So it is necessary to call _DSW object first. Only when it is not * present will the _PSW object used. */ @@ -2260,7 +2257,7 @@ int __init __acpi_probe_device_table(struct acpi_probe_entry *ap_head, int nr) mutex_lock(&acpi_probe_mutex); for (ape = ap_head; nr; ape++, nr--) { - if (ACPI_COMPARE_NAME(ACPI_SIG_MADT, ape->id)) { + if (ACPI_COMPARE_NAMESEG(ACPI_SIG_MADT, ape->id)) { acpi_probe_count = 0; acpi_table_parse_madt(ape->type, acpi_match_madt, 0); count += acpi_probe_count; diff --git a/drivers/acpi/spcr.c b/drivers/acpi/spcr.c index c336784d0bcb..b34d05e365b7 100644 --- a/drivers/acpi/spcr.c +++ b/drivers/acpi/spcr.c @@ -28,7 +28,7 @@ EXPORT_SYMBOL(qdf2400_e44_present); /* * Some Qualcomm Datacenter Technologies SoCs have a defective UART BUSY bit. - * Detect them by examining the OEM fields in the SPCR header, similiar to PCI + * Detect them by examining the OEM fields in the SPCR header, similar to PCI * quirk detection in pci_mcfg.c. */ static bool qdf2400_erratum_44_present(struct acpi_table_header *h) diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c index fa76f5e41b5c..75948a3f1a20 100644 --- a/drivers/acpi/sysfs.c +++ b/drivers/acpi/sysfs.c @@ -327,9 +327,9 @@ static struct kobject *hotplug_kobj; struct acpi_table_attr { struct bin_attribute attr; - char name[ACPI_NAME_SIZE]; + char name[ACPI_NAMESEG_SIZE]; int instance; - char filename[ACPI_NAME_SIZE+ACPI_INST_SIZE]; + char filename[ACPI_NAMESEG_SIZE+ACPI_INST_SIZE]; struct list_head node; }; @@ -368,10 +368,10 @@ static int acpi_table_attr_init(struct kobject *tables_obj, char instance_str[ACPI_INST_SIZE]; sysfs_attr_init(&table_attr->attr.attr); - ACPI_MOVE_NAME(table_attr->name, table_header->signature); + ACPI_COPY_NAMESEG(table_attr->name, table_header->signature); list_for_each_entry(attr, &acpi_table_attr_list, node) { - if (ACPI_COMPARE_NAME(table_attr->name, attr->name)) + if (ACPI_COMPARE_NAMESEG(table_attr->name, attr->name)) if (table_attr->instance < attr->instance) table_attr->instance = attr->instance; } @@ -382,8 +382,8 @@ static int acpi_table_attr_init(struct kobject *tables_obj, return -ERANGE; } - ACPI_MOVE_NAME(table_attr->filename, table_header->signature); - table_attr->filename[ACPI_NAME_SIZE] = '\0'; + ACPI_COPY_NAMESEG(table_attr->filename, table_header->signature); + table_attr->filename[ACPI_NAMESEG_SIZE] = '\0'; if (table_attr->instance > 1 || (table_attr->instance == 1 && !acpi_get_table (table_header->signature, 2, &header))) { @@ -484,7 +484,7 @@ static int acpi_table_data_init(struct acpi_table_header *th) int i; for (i = 0; i < NUM_ACPI_DATA_OBJS; i++) { - if (ACPI_COMPARE_NAME(th->signature, acpi_data_objs[i].name)) { + if (ACPI_COMPARE_NAMESEG(th->signature, acpi_data_objs[i].name)) { data_attr = kzalloc(sizeof(*data_attr), GFP_KERNEL); if (!data_attr) return -ENOMEM; diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c index 8fccbe49612a..d7bf936b1646 100644 --- a/drivers/acpi/tables.c +++ b/drivers/acpi/tables.c @@ -240,8 +240,7 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header) * On success returns sum of all matching entries for all proc handlers. * Otherwise, -ENODEV or -EINVAL is returned. */ -static int __init -acpi_parse_entries_array(char *id, unsigned long table_size, +static int __init acpi_parse_entries_array(char *id, unsigned long table_size, struct acpi_table_header *table_header, struct acpi_subtable_proc *proc, int proc_num, unsigned int max_entries) @@ -314,8 +313,7 @@ acpi_parse_entries_array(char *id, unsigned long table_size, return errs ? -EINVAL : count; } -int __init -acpi_table_parse_entries_array(char *id, +int __init acpi_table_parse_entries_array(char *id, unsigned long table_size, struct acpi_subtable_proc *proc, int proc_num, unsigned int max_entries) @@ -346,8 +344,7 @@ acpi_table_parse_entries_array(char *id, return count; } -int __init -acpi_table_parse_entries(char *id, +int __init acpi_table_parse_entries(char *id, unsigned long table_size, int entry_id, acpi_tbl_entry_handler handler, @@ -362,8 +359,7 @@ acpi_table_parse_entries(char *id, max_entries); } -int __init -acpi_table_parse_madt(enum acpi_madt_type id, +int __init acpi_table_parse_madt(enum acpi_madt_type id, acpi_tbl_entry_handler handler, unsigned int max_entries) { return acpi_table_parse_entries(ACPI_SIG_MADT, @@ -670,8 +666,8 @@ static void __init acpi_table_initrd_scan(void) table_length = table->length; /* Skip RSDT/XSDT which should only be used for override */ - if (ACPI_COMPARE_NAME(table->signature, ACPI_SIG_RSDT) || - ACPI_COMPARE_NAME(table->signature, ACPI_SIG_XSDT)) { + if (ACPI_COMPARE_NAMESEG(table->signature, ACPI_SIG_RSDT) || + ACPI_COMPARE_NAMESEG(table->signature, ACPI_SIG_XSDT)) { acpi_os_unmap_memory(table, ACPI_HEADER_SIZE); goto next_table; } @@ -725,8 +721,7 @@ static void *amlcode __attribute__ ((weakref("AmlCode"))); static void *dsdt_amlcode __attribute__ ((weakref("dsdt_aml_code"))); #endif -acpi_status -acpi_os_table_override(struct acpi_table_header *existing_table, +acpi_status acpi_os_table_override(struct acpi_table_header *existing_table, struct acpi_table_header **new_table) { if (!existing_table || !new_table) @@ -788,7 +783,6 @@ static int __init acpi_parse_apic_instance(char *str) return 0; } - early_param("acpi_apic_instance", acpi_parse_apic_instance); static int __init acpi_force_table_verification_setup(char *s) @@ -797,7 +791,6 @@ static int __init acpi_force_table_verification_setup(char *s) return 0; } - early_param("acpi_force_table_verification", acpi_force_table_verification_setup); static int __init acpi_force_32bit_fadt_addr(char *s) @@ -807,5 +800,4 @@ static int __init acpi_force_32bit_fadt_addr(char *s) return 0; } - early_param("acpi_force_32bit_fadt_addr", acpi_force_32bit_fadt_addr); diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c index c4b06cc075f9..89363b245489 100644 --- a/drivers/acpi/utils.c +++ b/drivers/acpi/utils.c @@ -739,6 +739,7 @@ EXPORT_SYMBOL(acpi_dev_found); struct acpi_dev_match_info { const char *dev_name; + struct acpi_device *adev; struct acpi_device_id hid[2]; const char *uid; s64 hrv; @@ -759,6 +760,7 @@ static int acpi_dev_match_cb(struct device *dev, void *data) return 0; match->dev_name = acpi_dev_name(adev); + match->adev = adev; if (match->hrv == -1) return 1; @@ -806,18 +808,20 @@ bool acpi_dev_present(const char *hid, const char *uid, s64 hrv) EXPORT_SYMBOL(acpi_dev_present); /** - * acpi_dev_get_first_match_name - Return name of first match of ACPI device + * acpi_dev_get_first_match_dev - Return the first match of ACPI device * @hid: Hardware ID of the device. * @uid: Unique ID of the device, pass NULL to not check _UID * @hrv: Hardware Revision of the device, pass -1 to not check _HRV * - * Return device name if a matching device was present + * Return the first match of ACPI device if a matching device was present * at the moment of invocation, or NULL otherwise. * + * The caller is responsible to call put_device() on the returned device. + * * See additional information in acpi_dev_present() as well. */ -const char * -acpi_dev_get_first_match_name(const char *hid, const char *uid, s64 hrv) +struct acpi_device * +acpi_dev_get_first_match_dev(const char *hid, const char *uid, s64 hrv) { struct acpi_dev_match_info match = {}; struct device *dev; @@ -827,9 +831,9 @@ acpi_dev_get_first_match_name(const char *hid, const char *uid, s64 hrv) match.hrv = hrv; dev = bus_find_device(&acpi_bus_type, NULL, &match, acpi_dev_match_cb); - return dev ? match.dev_name : NULL; + return dev ? match.adev : NULL; } -EXPORT_SYMBOL(acpi_dev_get_first_match_name); +EXPORT_SYMBOL(acpi_dev_get_first_match_dev); /* * acpi_backlight= handling, this is done here rather then in video_detect.c diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c index 43587ac680e4..31014c7d3793 100644 --- a/drivers/acpi/video_detect.c +++ b/drivers/acpi/video_detect.c @@ -112,7 +112,7 @@ static int video_detect_force_none(const struct dmi_system_id *d) static const struct dmi_system_id video_detect_dmi_table[] = { /* On Samsung X360, the BIOS will set a flag (VDRV) if generic * ACPI backlight device is used. This flag will definitively break - * the backlight interface (even the vendor interface) untill next + * the backlight interface (even the vendor interface) until next * reboot. It's why we should prevent video.ko from being used here * and we can't rely on a later call to acpi_video_unregister(). */ @@ -141,6 +141,14 @@ static const struct dmi_system_id video_detect_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "UL30A"), }, }, + { + .callback = video_detect_force_vendor, + .ident = "Sony VPCEH3U1E", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "VPCEH3U1E"), + }, + }, /* * These models have a working acpi_video backlight control, and using diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c index a983708b77a6..50f9402fb325 100644 --- a/drivers/extcon/extcon-axp288.c +++ b/drivers/extcon/extcon-axp288.c @@ -333,7 +333,7 @@ static int axp288_extcon_probe(struct platform_device *pdev) struct axp288_extcon_info *info; struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); struct device *dev = &pdev->dev; - const char *name; + struct acpi_device *adev; int ret, i, pirq; info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); @@ -357,9 +357,10 @@ static int axp288_extcon_probe(struct platform_device *pdev) if (ret) return ret; - name = acpi_dev_get_first_match_name("INT3496", NULL, -1); - if (name) { - info->id_extcon = extcon_get_extcon_dev(name); + adev = acpi_dev_get_first_match_dev("INT3496", NULL, -1); + if (adev) { + info->id_extcon = extcon_get_extcon_dev(acpi_dev_name(adev)); + put_device(&adev->dev); if (!info->id_extcon) return -EPROBE_DEFER; diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c index c51462f5aa1e..a5dc0629f225 100644 --- a/drivers/firmware/iscsi_ibft.c +++ b/drivers/firmware/iscsi_ibft.c @@ -425,7 +425,7 @@ static ssize_t ibft_attr_show_acpitbl(void *data, int type, char *buf) switch (type) { case ISCSI_BOOT_ACPITBL_SIGNATURE: - str += sprintf_string(str, ACPI_NAME_SIZE, + str += sprintf_string(str, ACPI_NAMESEG_SIZE, entry->header->header.signature); break; case ISCSI_BOOT_ACPITBL_OEM_ID: diff --git a/drivers/gpio/gpio-merrifield.c b/drivers/gpio/gpio-merrifield.c index 7c659fdaa6d5..3302125e5265 100644 --- a/drivers/gpio/gpio-merrifield.c +++ b/drivers/gpio/gpio-merrifield.c @@ -377,10 +377,20 @@ static void mrfld_irq_init_hw(struct mrfld_gpio *priv) } } -static const char *mrfld_gpio_get_pinctrl_dev_name(void) +static const char *mrfld_gpio_get_pinctrl_dev_name(struct mrfld_gpio *priv) { - const char *dev_name = acpi_dev_get_first_match_name("INTC1002", NULL, -1); - return dev_name ? dev_name : "pinctrl-merrifield"; + struct acpi_device *adev; + const char *name; + + adev = acpi_dev_get_first_match_dev("INTC1002", NULL, -1); + if (adev) { + name = devm_kstrdup(priv->dev, acpi_dev_name(adev), GFP_KERNEL); + acpi_dev_put(adev); + } else { + name = "pinctrl-merrifield"; + } + + return name; } static int mrfld_gpio_probe(struct pci_dev *pdev, const struct pci_device_id *id) @@ -441,7 +451,7 @@ static int mrfld_gpio_probe(struct pci_dev *pdev, const struct pci_device_id *id return retval; } - pinctrl_dev_name = mrfld_gpio_get_pinctrl_dev_name(); + pinctrl_dev_name = mrfld_gpio_get_pinctrl_dev_name(priv); for (i = 0; i < ARRAY_SIZE(mrfld_gpio_ranges); i++) { range = &mrfld_gpio_ranges[i]; retval = gpiochip_add_pin_range(&priv->chip, diff --git a/drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c b/drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c index 45e7e5cbdffb..7c71ffb733a1 100644 --- a/drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c +++ b/drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c @@ -230,7 +230,7 @@ static void get_single_name(acpi_handle handle, char *name) if (ACPI_FAILURE(acpi_get_name(handle, ACPI_SINGLE_NAME, &buffer))) pr_warn("Failed to get device name from acpi handle\n"); else { - memcpy(name, buffer.pointer, ACPI_NAME_SIZE); + memcpy(name, buffer.pointer, ACPI_NAMESEG_SIZE); kfree(buffer.pointer); } } diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 0300374101cd..2a462cf4eaa9 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -91,8 +91,8 @@ acpi_evaluate_dsm_typed(acpi_handle handle, const guid_t *guid, u64 rev, bool acpi_dev_found(const char *hid); bool acpi_dev_present(const char *hid, const char *uid, s64 hrv); -const char * -acpi_dev_get_first_match_name(const char *hid, const char *uid, s64 hrv); +struct acpi_device * +acpi_dev_get_first_match_dev(const char *hid, const char *uid, s64 hrv); #ifdef CONFIG_ACPI @@ -687,6 +687,10 @@ static inline bool acpi_device_can_poweroff(struct acpi_device *adev) adev->power.states[ACPI_STATE_D3_HOT].flags.explicit_set); } +static inline void acpi_dev_put(struct acpi_device *adev) +{ + put_device(&adev->dev); +} #else /* CONFIG_ACPI */ static inline int register_acpi_bus_type(void *bus) { return 0; } diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index 24dbb4e742a6..3b1b1d0e4c33 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -12,7 +12,7 @@ /* Current ACPICA subsystem version in YYYYMMDD format */ -#define ACPI_CA_VERSION 0x20190215 +#define ACPI_CA_VERSION 0x20190405 #include <acpi/acconfig.h> #include <acpi/actypes.h> diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h index 65cc9cbf1141..d568128025df 100644 --- a/include/acpi/actbl.h +++ b/include/acpi/actbl.h @@ -66,14 +66,14 @@ ******************************************************************************/ struct acpi_table_header { - char signature[ACPI_NAME_SIZE]; /* ASCII table signature */ + char signature[ACPI_NAMESEG_SIZE]; /* ASCII table signature */ u32 length; /* Length of table in bytes, including this header */ u8 revision; /* ACPI Specification minor version number */ u8 checksum; /* To make sum of entire table == 0 */ char oem_id[ACPI_OEM_ID_SIZE]; /* ASCII OEM identification */ char oem_table_id[ACPI_OEM_TABLE_ID_SIZE]; /* ASCII OEM table identification */ u32 oem_revision; /* OEM revision number */ - char asl_compiler_id[ACPI_NAME_SIZE]; /* ASCII ASL compiler vendor ID */ + char asl_compiler_id[ACPI_NAMESEG_SIZE]; /* ASCII ASL compiler vendor ID */ u32 asl_compiler_revision; /* ASL compiler version */ }; diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h index f73382e82c26..ad6892a24015 100644 --- a/include/acpi/actypes.h +++ b/include/acpi/actypes.h @@ -375,7 +375,7 @@ typedef u64 acpi_physical_address; /* Names within the namespace are 4 bytes long */ -#define ACPI_NAME_SIZE 4 +#define ACPI_NAMESEG_SIZE 4 /* Fixed by ACPI spec */ #define ACPI_PATH_SEGMENT_LENGTH 5 /* 4 chars for name + 1 char for separator */ #define ACPI_PATH_SEPARATOR '.' @@ -515,11 +515,11 @@ typedef u64 acpi_integer; /* Optimizations for 4-character (32-bit) acpi_name manipulation */ #ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED -#define ACPI_COMPARE_NAME(a,b) (*ACPI_CAST_PTR (u32, (a)) == *ACPI_CAST_PTR (u32, (b))) -#define ACPI_MOVE_NAME(dest,src) (*ACPI_CAST_PTR (u32, (dest)) = *ACPI_CAST_PTR (u32, (src))) +#define ACPI_COMPARE_NAMESEG(a,b) (*ACPI_CAST_PTR (u32, (a)) == *ACPI_CAST_PTR (u32, (b))) +#define ACPI_COPY_NAMESEG(dest,src) (*ACPI_CAST_PTR (u32, (dest)) = *ACPI_CAST_PTR (u32, (src))) #else -#define ACPI_COMPARE_NAME(a,b) (!strncmp (ACPI_CAST_PTR (char, (a)), ACPI_CAST_PTR (char, (b)), ACPI_NAME_SIZE)) -#define ACPI_MOVE_NAME(dest,src) (strncpy (ACPI_CAST_PTR (char, (dest)), ACPI_CAST_PTR (char, (src)), ACPI_NAME_SIZE)) +#define ACPI_COMPARE_NAMESEG(a,b) (!strncmp (ACPI_CAST_PTR (char, (a)), ACPI_CAST_PTR (char, (b)), ACPI_NAMESEG_SIZE)) +#define ACPI_COPY_NAMESEG(dest,src) (strncpy (ACPI_CAST_PTR (char, (dest)), ACPI_CAST_PTR (char, (src)), ACPI_NAMESEG_SIZE)) #endif /* Support for the special RSDP signature (8 characters) */ @@ -529,7 +529,7 @@ typedef u64 acpi_integer; /* Support for OEMx signature (x can be any character) */ #define ACPI_IS_OEM_SIG(a) (!strncmp (ACPI_CAST_PTR (char, (a)), ACPI_OEM_NAME, 3) &&\ - strnlen (a, ACPI_NAME_SIZE) == ACPI_NAME_SIZE) + strnlen (a, ACPI_NAMESEG_SIZE) == ACPI_NAMESEG_SIZE) /* * Algorithm to obtain access bit width. diff --git a/include/linux/acpi.h b/include/linux/acpi.h index d5dcebd7aad3..ca55ae00f8c9 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -669,12 +669,14 @@ static inline bool acpi_dev_present(const char *hid, const char *uid, s64 hrv) return false; } -static inline const char * -acpi_dev_get_first_match_name(const char *hid, const char *uid, s64 hrv) +static inline struct acpi_device * +acpi_dev_get_first_match_dev(const char *hid, const char *uid, s64 hrv) { return NULL; } +static inline void acpi_dev_put(struct acpi_device *adev) {} + static inline bool is_acpi_node(struct fwnode_handle *fwnode) { return false; diff --git a/sound/soc/intel/boards/bytcht_da7213.c b/sound/soc/intel/boards/bytcht_da7213.c index b8e884803777..4decba338156 100644 --- a/sound/soc/intel/boards/bytcht_da7213.c +++ b/sound/soc/intel/boards/bytcht_da7213.c @@ -226,7 +226,7 @@ static int bytcht_da7213_probe(struct platform_device *pdev) struct snd_soc_card *card; struct snd_soc_acpi_mach *mach; const char *platform_name; - const char *i2c_name = NULL; + struct acpi_device *adev; int dai_index = 0; int ret_val = 0; int i; @@ -244,10 +244,11 @@ static int bytcht_da7213_probe(struct platform_device *pdev) } /* fixup codec name based on HID */ - i2c_name = acpi_dev_get_first_match_name(mach->id, NULL, -1); - if (i2c_name) { + adev = acpi_dev_get_first_match_dev(mach->id, NULL, -1); + if (adev) { snprintf(codec_name, sizeof(codec_name), - "%s%s", "i2c-", i2c_name); + "i2c-%s", acpi_dev_name(adev)); + put_device(&adev->dev); dailink[dai_index].codec_name = codec_name; } diff --git a/sound/soc/intel/boards/bytcht_es8316.c b/sound/soc/intel/boards/bytcht_es8316.c index d2a7e6ba11ae..6937c00cf63d 100644 --- a/sound/soc/intel/boards/bytcht_es8316.c +++ b/sound/soc/intel/boards/bytcht_es8316.c @@ -442,7 +442,7 @@ static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct snd_soc_acpi_mach *mach; const char *platform_name; - const char *i2c_name = NULL; + struct acpi_device *adev; struct device *codec_dev; int dai_index = 0; int i; @@ -463,10 +463,11 @@ static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev) } /* fixup codec name based on HID */ - i2c_name = acpi_dev_get_first_match_name(mach->id, NULL, -1); - if (i2c_name) { + adev = acpi_dev_get_first_match_dev(mach->id, NULL, -1); + if (adev) { snprintf(codec_name, sizeof(codec_name), - "%s%s", "i2c-", i2c_name); + "i2c-%s", acpi_dev_name(adev)); + put_device(&adev->dev); byt_cht_es8316_dais[dai_index].codec_name = codec_name; } diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 940eb27158da..f9175cf6747e 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -1154,7 +1154,7 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) struct byt_rt5640_private *priv; struct snd_soc_acpi_mach *mach; const char *platform_name; - const char *i2c_name = NULL; + struct acpi_device *adev; int ret_val = 0; int dai_index = 0; int i; @@ -1178,11 +1178,11 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) } /* fixup codec name based on HID */ - i2c_name = acpi_dev_get_first_match_name(mach->id, NULL, -1); - if (i2c_name) { + adev = acpi_dev_get_first_match_dev(mach->id, NULL, -1); + if (adev) { snprintf(byt_rt5640_codec_name, sizeof(byt_rt5640_codec_name), - "%s%s", "i2c-", i2c_name); - + "i2c-%s", acpi_dev_name(adev)); + put_device(&adev->dev); byt_rt5640_dais[dai_index].codec_name = byt_rt5640_codec_name; } diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c index b0a4d297176e..b744add01d12 100644 --- a/sound/soc/intel/boards/bytcr_rt5651.c +++ b/sound/soc/intel/boards/bytcr_rt5651.c @@ -867,8 +867,8 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev) struct byt_rt5651_private *priv; struct snd_soc_acpi_mach *mach; const char *platform_name; + struct acpi_device *adev; struct device *codec_dev; - const char *i2c_name = NULL; const char *hp_swapped; bool is_bytcr = false; int ret_val = 0; @@ -894,14 +894,16 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev) } /* fixup codec name based on HID */ - i2c_name = acpi_dev_get_first_match_name(mach->id, NULL, -1); - if (!i2c_name) { + adev = acpi_dev_get_first_match_dev(mach->id, NULL, -1); + if (adev) { + snprintf(byt_rt5651_codec_name, sizeof(byt_rt5651_codec_name), + "i2c-%s", acpi_dev_name(adev)); + put_device(&adev->dev); + byt_rt5651_dais[dai_index].codec_name = byt_rt5651_codec_name; + } else { dev_err(&pdev->dev, "Error cannot find '%s' dev\n", mach->id); return -ENODEV; } - snprintf(byt_rt5651_codec_name, sizeof(byt_rt5651_codec_name), - "%s%s", "i2c-", i2c_name); - byt_rt5651_dais[dai_index].codec_name = byt_rt5651_codec_name; codec_dev = bus_find_device_by_name(&i2c_bus_type, NULL, byt_rt5651_codec_name); diff --git a/sound/soc/intel/boards/cht_bsw_rt5645.c b/sound/soc/intel/boards/cht_bsw_rt5645.c index cbc2d458483f..32dbeaf1ab94 100644 --- a/sound/soc/intel/boards/cht_bsw_rt5645.c +++ b/sound/soc/intel/boards/cht_bsw_rt5645.c @@ -532,7 +532,7 @@ static int snd_cht_mc_probe(struct platform_device *pdev) struct snd_soc_acpi_mach *mach; const char *platform_name; struct cht_mc_private *drv; - const char *i2c_name = NULL; + struct acpi_device *adev; bool found = false; bool is_bytcr = false; int dai_index = 0; @@ -573,10 +573,11 @@ static int snd_cht_mc_probe(struct platform_device *pdev) } /* fixup codec name based on HID */ - i2c_name = acpi_dev_get_first_match_name(mach->id, NULL, -1); - if (i2c_name) { + adev = acpi_dev_get_first_match_dev(mach->id, NULL, -1); + if (adev) { snprintf(cht_rt5645_codec_name, sizeof(cht_rt5645_codec_name), - "%s%s", "i2c-", i2c_name); + "i2c-%s", acpi_dev_name(adev)); + put_device(&adev->dev); cht_dailink[dai_index].codec_name = cht_rt5645_codec_name; } diff --git a/sound/soc/intel/boards/cht_bsw_rt5672.c b/sound/soc/intel/boards/cht_bsw_rt5672.c index 3d5a2b3a06f0..0f7770822388 100644 --- a/sound/soc/intel/boards/cht_bsw_rt5672.c +++ b/sound/soc/intel/boards/cht_bsw_rt5672.c @@ -401,7 +401,7 @@ static int snd_cht_mc_probe(struct platform_device *pdev) struct cht_mc_private *drv; struct snd_soc_acpi_mach *mach = pdev->dev.platform_data; const char *platform_name; - const char *i2c_name; + struct acpi_device *adev; int i; drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_KERNEL); @@ -411,10 +411,11 @@ static int snd_cht_mc_probe(struct platform_device *pdev) strcpy(drv->codec_name, RT5672_I2C_DEFAULT); /* fixup codec name based on HID */ - i2c_name = acpi_dev_get_first_match_name(mach->id, NULL, -1); - if (i2c_name) { + adev = acpi_dev_get_first_match_dev(mach->id, NULL, -1); + if (adev) { snprintf(drv->codec_name, sizeof(drv->codec_name), - "i2c-%s", i2c_name); + "i2c-%s", acpi_dev_name(adev)); + put_device(&adev->dev); for (i = 0; i < ARRAY_SIZE(cht_dailink); i++) { if (!strcmp(cht_dailink[i].codec_name, RT5672_I2C_DEFAULT)) { diff --git a/tools/power/acpi/os_specific/service_layers/oslinuxtbl.c b/tools/power/acpi/os_specific/service_layers/oslinuxtbl.c index 2a1fd9182f94..d1f3d44e315e 100644 --- a/tools/power/acpi/os_specific/service_layers/oslinuxtbl.c +++ b/tools/power/acpi/os_specific/service_layers/oslinuxtbl.c @@ -19,7 +19,7 @@ ACPI_MODULE_NAME("oslinuxtbl") typedef struct osl_table_info { struct osl_table_info *next; u32 instance; - char signature[ACPI_NAME_SIZE]; + char signature[ACPI_NAMESEG_SIZE]; } osl_table_info; @@ -286,14 +286,14 @@ static acpi_status osl_add_table_to_list(char *signature, u32 instance) return (AE_NO_MEMORY); } - ACPI_MOVE_NAME(new_info->signature, signature); + ACPI_COPY_NAMESEG(new_info->signature, signature); if (!gbl_table_list_head) { gbl_table_list_head = new_info; } else { next = gbl_table_list_head; while (1) { - if (ACPI_COMPARE_NAME(next->signature, signature)) { + if (ACPI_COMPARE_NAMESEG(next->signature, signature)) { if (next->instance == instance) { found = TRUE; } @@ -782,11 +782,11 @@ osl_get_bios_table(char *signature, /* Handle special tables whose addresses are not in RSDT/XSDT */ - if (ACPI_COMPARE_NAME(signature, ACPI_RSDP_NAME) || - ACPI_COMPARE_NAME(signature, ACPI_SIG_RSDT) || - ACPI_COMPARE_NAME(signature, ACPI_SIG_XSDT) || - ACPI_COMPARE_NAME(signature, ACPI_SIG_DSDT) || - ACPI_COMPARE_NAME(signature, ACPI_SIG_FACS)) { + if (ACPI_COMPARE_NAMESEG(signature, ACPI_RSDP_NAME) || + ACPI_COMPARE_NAMESEG(signature, ACPI_SIG_RSDT) || + ACPI_COMPARE_NAMESEG(signature, ACPI_SIG_XSDT) || + ACPI_COMPARE_NAMESEG(signature, ACPI_SIG_DSDT) || + ACPI_COMPARE_NAMESEG(signature, ACPI_SIG_FACS)) { find_next_instance: @@ -797,7 +797,7 @@ find_next_instance: * careful about the FADT length and validate table addresses. * Note: The 64-bit addresses have priority. */ - if (ACPI_COMPARE_NAME(signature, ACPI_SIG_DSDT)) { + if (ACPI_COMPARE_NAMESEG(signature, ACPI_SIG_DSDT)) { if (current_instance < 2) { if ((gbl_fadt->header.length >= MIN_FADT_FOR_XDSDT) && gbl_fadt->Xdsdt @@ -815,7 +815,7 @@ find_next_instance: dsdt; } } - } else if (ACPI_COMPARE_NAME(signature, ACPI_SIG_FACS)) { + } else if (ACPI_COMPARE_NAMESEG(signature, ACPI_SIG_FACS)) { if (current_instance < 2) { if ((gbl_fadt->header.length >= MIN_FADT_FOR_XFACS) && gbl_fadt->Xfacs @@ -833,7 +833,7 @@ find_next_instance: facs; } } - } else if (ACPI_COMPARE_NAME(signature, ACPI_SIG_XSDT)) { + } else if (ACPI_COMPARE_NAMESEG(signature, ACPI_SIG_XSDT)) { if (!gbl_revision) { return (AE_BAD_SIGNATURE); } @@ -842,7 +842,7 @@ find_next_instance: (acpi_physical_address)gbl_rsdp. xsdt_physical_address; } - } else if (ACPI_COMPARE_NAME(signature, ACPI_SIG_RSDT)) { + } else if (ACPI_COMPARE_NAMESEG(signature, ACPI_SIG_RSDT)) { if (current_instance == 0) { table_address = (acpi_physical_address)gbl_rsdp. @@ -931,7 +931,7 @@ find_next_instance: /* Does this table match the requested signature? */ - if (!ACPI_COMPARE_NAME + if (!ACPI_COMPARE_NAMESEG (mapped_table->signature, signature)) { osl_unmap_table(mapped_table); mapped_table = NULL; @@ -995,7 +995,7 @@ static acpi_status osl_list_customized_tables(char *directory) { void *table_dir; u32 instance; - char temp_name[ACPI_NAME_SIZE]; + char temp_name[ACPI_NAMESEG_SIZE]; char *filename; acpi_status status = AE_OK; @@ -1086,8 +1086,8 @@ osl_map_table(acpi_size address, return (AE_BAD_SIGNATURE); } } else - if (!ACPI_COMPARE_NAME(signature, mapped_table->signature)) - { + if (!ACPI_COMPARE_NAMESEG + (signature, mapped_table->signature)) { acpi_os_unmap_memory(mapped_table, sizeof(struct acpi_table_header)); return (AE_BAD_SIGNATURE); @@ -1158,15 +1158,15 @@ osl_table_name_from_file(char *filename, char *signature, u32 *instance) /* Ignore meaningless files */ - if (strlen(filename) < ACPI_NAME_SIZE) { + if (strlen(filename) < ACPI_NAMESEG_SIZE) { return (AE_BAD_SIGNATURE); } /* Extract instance number */ - if (isdigit((int)filename[ACPI_NAME_SIZE])) { - sscanf(&filename[ACPI_NAME_SIZE], "%u", instance); - } else if (strlen(filename) != ACPI_NAME_SIZE) { + if (isdigit((int)filename[ACPI_NAMESEG_SIZE])) { + sscanf(&filename[ACPI_NAMESEG_SIZE], "%u", instance); + } else if (strlen(filename) != ACPI_NAMESEG_SIZE) { return (AE_BAD_SIGNATURE); } else { *instance = 0; @@ -1174,7 +1174,7 @@ osl_table_name_from_file(char *filename, char *signature, u32 *instance) /* Extract signature */ - ACPI_MOVE_NAME(signature, filename); + ACPI_COPY_NAMESEG(signature, filename); return (AE_OK); } @@ -1236,7 +1236,7 @@ osl_read_table_from_file(char *filename, status = AE_BAD_SIGNATURE; goto exit; } - } else if (!ACPI_COMPARE_NAME(signature, header.signature)) { + } else if (!ACPI_COMPARE_NAMESEG(signature, header.signature)) { fprintf(stderr, "Incorrect signature: Expecting %4.4s, found %4.4s\n", signature, header.signature); @@ -1311,7 +1311,7 @@ osl_get_customized_table(char *pathname, { void *table_dir; u32 current_instance = 0; - char temp_name[ACPI_NAME_SIZE]; + char temp_name[ACPI_NAMESEG_SIZE]; char table_filename[PATH_MAX]; char *filename; acpi_status status; @@ -1329,7 +1329,7 @@ osl_get_customized_table(char *pathname, /* Ignore meaningless files */ - if (!ACPI_COMPARE_NAME(filename, signature)) { + if (!ACPI_COMPARE_NAMESEG(filename, signature)) { continue; } diff --git a/tools/power/acpi/tools/acpidump/apdump.c b/tools/power/acpi/tools/acpidump/apdump.c index e256c2ac5ddc..820baeb5092b 100644 --- a/tools/power/acpi/tools/acpidump/apdump.c +++ b/tools/power/acpi/tools/acpidump/apdump.c @@ -289,14 +289,14 @@ int ap_dump_table_by_address(char *ascii_address) int ap_dump_table_by_name(char *signature) { - char local_signature[ACPI_NAME_SIZE + 1]; + char local_signature[ACPI_NAMESEG_SIZE + 1]; u32 instance; struct acpi_table_header *table; acpi_physical_address address; acpi_status status; int table_status; - if (strlen(signature) != ACPI_NAME_SIZE) { + if (strlen(signature) != ACPI_NAMESEG_SIZE) { fprintf(stderr, "Invalid table signature [%s]: must be exactly 4 characters\n", signature); @@ -310,9 +310,9 @@ int ap_dump_table_by_name(char *signature) /* To be friendly, handle tables whose signatures do not match the name */ - if (ACPI_COMPARE_NAME(local_signature, "FADT")) { + if (ACPI_COMPARE_NAMESEG(local_signature, "FADT")) { strcpy(local_signature, ACPI_SIG_FADT); - } else if (ACPI_COMPARE_NAME(local_signature, "MADT")) { + } else if (ACPI_COMPARE_NAMESEG(local_signature, "MADT")) { strcpy(local_signature, ACPI_SIG_MADT); } diff --git a/tools/power/acpi/tools/acpidump/apfiles.c b/tools/power/acpi/tools/acpidump/apfiles.c index 49972bc78bc5..a42cfcaa3293 100644 --- a/tools/power/acpi/tools/acpidump/apfiles.c +++ b/tools/power/acpi/tools/acpidump/apfiles.c @@ -97,7 +97,7 @@ int ap_open_output_file(char *pathname) int ap_write_to_binary_file(struct acpi_table_header *table, u32 instance) { - char filename[ACPI_NAME_SIZE + 16]; + char filename[ACPI_NAMESEG_SIZE + 16]; char instance_str[16]; ACPI_FILE file; acpi_size actual; @@ -110,16 +110,16 @@ int ap_write_to_binary_file(struct acpi_table_header *table, u32 instance) /* Construct lower-case filename from the table local signature */ if (ACPI_VALIDATE_RSDP_SIG(table->signature)) { - ACPI_MOVE_NAME(filename, ACPI_RSDP_NAME); + ACPI_COPY_NAMESEG(filename, ACPI_RSDP_NAME); } else { - ACPI_MOVE_NAME(filename, table->signature); + ACPI_COPY_NAMESEG(filename, table->signature); } filename[0] = (char)tolower((int)filename[0]); filename[1] = (char)tolower((int)filename[1]); filename[2] = (char)tolower((int)filename[2]); filename[3] = (char)tolower((int)filename[3]); - filename[ACPI_NAME_SIZE] = 0; + filename[ACPI_NAMESEG_SIZE] = 0; /* Handle multiple SSDts - create different filenames for each */ |