diff options
| -rw-r--r-- | drivers/clocksource/Makefile | 1 | ||||
| -rw-r--r-- | drivers/clocksource/timer-ti-dm-systimer.c | 731 |
2 files changed, 732 insertions, 0 deletions
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 641ba5383ab5..bdda1a2e4097 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_CLKSRC_MMIO) += mmio.o obj-$(CONFIG_DAVINCI_TIMER) += timer-davinci.o obj-$(CONFIG_DIGICOLOR_TIMER) += timer-digicolor.o obj-$(CONFIG_OMAP_DM_TIMER) += timer-ti-dm.o +obj-$(CONFIG_OMAP_DM_TIMER) += timer-ti-dm-systimer.o obj-$(CONFIG_DW_APB_TIMER) += dw_apb_timer.o obj-$(CONFIG_DW_APB_TIMER_OF) += dw_apb_timer_of.o obj-$(CONFIG_FTTMR010_TIMER) += timer-fttmr010.o diff --git a/drivers/clocksource/timer-ti-dm-systimer.c b/drivers/clocksource/timer-ti-dm-systimer.c new file mode 100644 index 000000000000..1495618a5744 --- /dev/null +++ b/drivers/clocksource/timer-ti-dm-systimer.c @@ -0,0 +1,731 @@ +// SPDX-License-Identifier: GPL-2.0+ +#include <linux/clk.h> +#include <linux/clocksource.h> +#include <linux/clockchips.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/err.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/sched_clock.h> + +#include <linux/clk/clk-conf.h> + +#include <clocksource/timer-ti-dm.h> +#include <dt-bindings/bus/ti-sysc.h> + +/* For type1, set SYSC_OMAP2_CLOCKACTIVITY for fck off on idle, l4 clock on */ +#define DMTIMER_TYPE1_ENABLE ((1 << 9) | (SYSC_IDLE_SMART << 3) | \ + SYSC_OMAP2_ENAWAKEUP | SYSC_OMAP2_AUTOIDLE) + +#define DMTIMER_TYPE2_ENABLE (SYSC_IDLE_SMART_WKUP << 2) +#define DMTIMER_RESET_WAIT 100000 + +#define DMTIMER_INST_DONT_CARE ~0U + +static int counter_32k; +static u32 clocksource; +static u32 clockevent; + +/* + * Subset of the timer registers we use. Note that the register offsets + * depend on the timer revision detected. + */ +struct dmtimer_systimer { + void __iomem *base; + u8 sysc; + u8 irq_stat; + u8 irq_ena; + u8 pend; + u8 load; + u8 counter; + u8 ctrl; + u8 wakeup; + u8 ifctrl; + unsigned long rate; +}; + +struct dmtimer_clockevent { + struct clock_event_device dev; + struct dmtimer_systimer t; + u32 period; +}; + +struct dmtimer_clocksource { + struct clocksource dev; + struct dmtimer_systimer t; + unsigned int loadval; +}; + +/* Assumes v1 ip if bits [31:16] are zero */ +static bool dmtimer_systimer_revision1(struct dmtimer_systimer *t) +{ + u32 tidr = readl_relaxed(t->base); + + return !(tidr >> 16); +} + +static int __init dmtimer_systimer_type1_reset(struct dmtimer_systimer *t) +{ + void __iomem *syss = t->base + OMAP_TIMER_V1_SYS_STAT_OFFSET; + int ret; + u32 l; + + writel_relaxed(BIT(1) | BIT(2), t->base + t->ifctrl); + ret = readl_poll_timeout_atomic(syss, l, l & BIT(0), 100, + DMTIMER_RESET_WAIT); + + return ret; +} + +/* Note we must use io_base instead of func_base for type2 OCP regs */ +static int __init dmtimer_systimer_type2_reset(struct dmtimer_systimer *t) +{ + void __iomem *sysc = t->base + t->sysc; + u32 l; + + l = readl_relaxed(sysc); + l |= BIT(0); + writel_relaxed(l, sysc); + + return readl_poll_timeout_atomic(sysc, l, !(l & BIT(0)), 100, + DMTIMER_RESET_WAIT); +} + +static int __init dmtimer_systimer_reset(struct dmtimer_systimer *t) +{ + int ret; + + if (dmtimer_systimer_revision1(t)) + ret = dmtimer_systimer_type1_reset(t); + else + ret = dmtimer_systimer_type2_reset(t); + if (ret < 0) { + pr_err("%s failed with %i\n", __func__, ret); + + return ret; + } + + return 0; +} + +static const struct of_device_id counter_match_table[] = { + { .compatible = "ti,omap-counter32k" }, + { /* Sentinel */ }, +}; + +/* + * Check if the SoC als has a usable working 32 KiHz counter. The 32 KiHz + * counter is handled by timer-ti-32k, but we need to detect it as it + * affects the preferred dmtimer system timer configuration. There is + * typically no use for a dmtimer clocksource if the 32 KiHz counter is + * present, except on am437x as described below. + */ +static void __init dmtimer_systimer_check_counter32k(void) +{ + struct device_node *np; + + if (counter_32k) + return; + + np = of_find_matching_node(NULL, counter_match_table); + if (!np) { + counter_32k = -ENODEV; + + return; + } + + if (of_device_is_available(np)) + counter_32k = 1; + else + counter_32k = -ENODEV; + + of_node_put(np); +} + +static const struct of_device_id dmtimer_match_table[] = { + { .compatible = "ti,omap2420-timer", }, + { .compatible = "ti,omap3430-timer", }, + { .compatible = "ti,omap4430-timer", }, + { .compatible = "ti,omap5430-timer", }, + { .compatible = "ti,am335x-timer", }, + { .compatible = "ti,am335x-timer-1ms", }, + { .compatible = "ti,dm814-timer", }, + { .compatible = "ti,dm816-timer", }, + { /* Sentinel */ }, +}; + +/* + * Checks that system timers are configured to not reset and idle during + * the generic timer-ti-dm device driver probe. And that the system timer + * source clocks are properly configured. Also, let's not hog any DSP and + * PWM capable timers unnecessarily as system timers. + */ +static bool __init dmtimer_is_preferred(struct device_node *np) +{ + if (!of_device_is_available(np)) + return false; + + if (!of_property_read_bool(np->parent, + "ti,no-reset-on-init")) + return false; + + if (!of_property_read_bool(np->parent, "ti,no-idle")) + return false; + + /* Secure gptimer12 is always clocked with a fixed source */ + if (!of_property_read_bool(np, "ti,timer-secure")) { + if (!of_property_read_bool(np, "assigned-clocks")) + return false; + + if (!of_property_read_bool(np, "assigned-clock-parents")) + return false; + } + + if (of_property_read_bool(np, "ti,timer-dsp")) + return false; + + if (of_property_read_bool(np, "ti,timer-pwm")) + return false; + + return true; +} + +/* + * Finds the first available usable always-on timer, and assigns it to either + * clockevent or clocksource depending if the counter_32k is available on the + * SoC or not. + * + * Some omap3 boards with unreliable oscillator must not use the counter_32k + * or dmtimer1 with 32 KiHz source. Additionally, the boards with unreliable + * oscillator should really set counter_32k as disabled, and delete dmtimer1 + * ti,always-on property, but let's not count on it. For these quirky cases, + * we prefer using the always-on secure dmtimer12 with the internal 32 KiHz + * clock as the clocksource, and any available dmtimer as clockevent. + * + * For am437x, we are using am335x style dmtimer clocksource. It is unclear + * if this quirk handling is really needed, but let's change it separately + * based on testing as it might cause side effects. + */ +static void __init dmtimer_systimer_assign_alwon(void) +{ + struct device_node *np; + u32 pa = 0; + bool quirk_unreliable_oscillator = false; + + /* Quirk unreliable 32 KiHz oscillator with incomplete dts */ + if (of_machine_is_compatible("ti,omap3-beagle") || + of_machine_is_compatible("timll,omap3-devkit8000")) { + quirk_unreliable_oscillator = true; + counter_32k = -ENODEV; + } + + /* Quirk am437x using am335x style dmtimer clocksource */ + if (of_machine_is_compatible("ti,am43")) + counter_32k = -ENODEV; + + for_each_matching_node(np, dmtimer_match_table) { + if (!dmtimer_is_preferred(np)) + continue; + + if (of_property_read_bool(np, "ti,timer-alwon")) { + const __be32 *addr; + + addr = of_get_address(np, 0, NULL, NULL); + pa = of_translate_address(np, addr); + if (pa) { + /* Quirky omap3 boards must use dmtimer12 */ + if (quirk_unreliable_oscillator && + pa == 0x48318000) + continue; + + of_node_put(np); + break; + } + } + } + + /* Usually no need for dmtimer clocksource if we have counter32 */ + if (counter_32k >= 0) { + clockevent = pa; + clocksource = 0; + } else { + clocksource = pa; + clockevent = DMTIMER_INST_DONT_CARE; + } +} + +/* Finds the first usable dmtimer, used for the don't care case */ +static u32 __init dmtimer_systimer_find_first_available(void) +{ + struct device_node *np; + const __be32 *addr; + u32 pa = 0; + + for_each_matching_node(np, dmtimer_match_table) { + if (!dmtimer_is_preferred(np)) + continue; + + addr = of_get_address(np, 0, NULL, NULL); + pa = of_translate_address(np, addr); + if (pa) { + if (pa == clocksource || pa == clockevent) { + pa = 0; + continue; + } + + of_node_put(np); + break; + } + } + + return pa; +} + +/* Selects the best clocksource and clockevent to use */ +static void __init dmtimer_systimer_select_best(void) +{ + dmtimer_systimer_check_counter32k(); + dmtimer_systimer_assign_alwon(); + + if (clockevent == DMTIMER_INST_DONT_CARE) + clockevent = dmtimer_systimer_find_first_available(); + + pr_debug("%s: counter_32k: %i clocksource: %08x clockevent: %08x\n", + __func__, counter_32k, clocksource, clockevent); +} + +/* Interface clocks are only available on some SoCs variants */ +static int __init dmtimer_systimer_init_clock(struct device_node *np, + const char *name, + unsigned long *rate) +{ + struct clk *clock; + unsigned long r; + int error; + + clock = of_clk_get_by_name(np, name); + if ((PTR_ERR(clock) == -EINVAL) && !strncmp(name, "ick", 3)) + return 0; + else if (IS_ERR(clock)) + return PTR_ERR(clock); + + error = clk_prepare_enable(clock); + if (error) + return error; + + r = clk_get_rate(clock); + if (!r) + return -ENODEV; + + *rate = r; + + return 0; +} + +static void dmtimer_systimer_enable(struct dmtimer_systimer *t) +{ + u32 val; + + if (dmtimer_systimer_revision1(t)) + val = DMTIMER_TYPE1_ENABLE; + else + val = DMTIMER_TYPE2_ENABLE; + + writel_relaxed(val, t->base + t->sysc); +} + +static void dmtimer_systimer_disable(struct dmtimer_systimer *t) +{ + writel_relaxed(0, t->base + t->sysc); +} + +static int __init dmtimer_systimer_setup(struct device_node *np, + struct dmtimer_systimer *t) +{ + unsigned long rate; + u8 regbase; + int error; + + if (!of_device_is_compatible(np->parent, "ti,sysc")) + return -EINVAL; + + t->base = of_iomap(np, 0); + if (!t->base) + return -ENXIO; + + /* + * Enable optional assigned-clock-parents configured at the timer + * node level. For regular device drivers, this is done automatically + * by bus related code such as platform_drv_probe(). + */ + error = of_clk_set_defaults(np, false); + if (error < 0) + pr_err("%s: clock source init failed: %i\n", __func__, error); + + /* For ti-sysc, we have timer clocks at the parent module level */ + error = dmtimer_systimer_init_clock(np->parent, "fck", &rate); + if (error) + goto err_unmap; + + t->rate = rate; + + error = dmtimer_systimer_init_clock(np->parent, "ick", &rate); + if (error) + goto err_unmap; + + if (dmtimer_systimer_revision1(t)) { + t->irq_stat = OMAP_TIMER_V1_STAT_OFFSET; + t->irq_ena = OMAP_TIMER_V1_INT_EN_OFFSET; + t->pend = _OMAP_TIMER_WRITE_PEND_OFFSET; + regbase = 0; + } else { + t->irq_stat = OMAP_TIMER_V2_IRQSTATUS; + t->irq_ena = OMAP_TIMER_V2_IRQENABLE_SET; + regbase = OMAP_TIMER_V2_FUNC_OFFSET; + t->pend = regbase + _OMAP_TIMER_WRITE_PEND_OFFSET; + } + + t->sysc = OMAP_TIMER_OCP_CFG_OFFSET; + t->load = regbase + _OMAP_TIMER_LOAD_OFFSET; + t->counter = regbase + _OMAP_TIMER_COUNTER_OFFSET; + t->ctrl = regbase + _OMAP_TIMER_CTRL_OFFSET; + t->wakeup = regbase + _OMAP_TIMER_WAKEUP_EN_OFFSET; + t->ifctrl = regbase + _OMAP_TIMER_IF_CTRL_OFFSET; + + dmtimer_systimer_enable(t); + dmtimer_systimer_reset(t); + pr_debug("dmtimer rev %08x sysc %08x\n", readl_relaxed(t->base), + readl_relaxed(t->base + t->sysc)); + + return 0; + +err_unmap: + iounmap(t->base); + + return error; +} + +/* Clockevent */ +static struct dmtimer_clockevent * +to_dmtimer_clockevent(struct clock_event_device *clockevent) +{ + return container_of(clockevent, struct dmtimer_clockevent, dev); +} + +static irqreturn_t dmtimer_clockevent_interrupt(int irq, void *data) +{ + struct dmtimer_clockevent *clkevt = data; + struct dmtimer_systimer *t = &clkevt->t; + + writel_relaxed(OMAP_TIMER_INT_OVERFLOW, t->base + t->irq_stat); + clkevt->dev.event_handler(&clkevt->dev); + + return IRQ_HANDLED; +} + +static int dmtimer_set_next_event(unsigned long cycles, + struct clock_event_device *evt) +{ + struct dmtimer_clockevent *clkevt = to_dmtimer_clockevent(evt); + struct dmtimer_systimer *t = &clkevt->t; + void __iomem *pend = t->base + t->pend; + + writel_relaxed(0xffffffff - cycles, t->base + t->counter); + while (readl_relaxed(pend) & WP_TCRR) + cpu_relax(); + + writel_relaxed(OMAP_TIMER_CTRL_ST, t->base + t->ctrl); + while (readl_relaxed(pend) & WP_TCLR) + cpu_relax(); + + return 0; +} + +static int dmtimer_clockevent_shutdown(struct clock_event_device *evt) +{ + struct dmtimer_clockevent *clkevt = to_dmtimer_clockevent(evt); + struct dmtimer_systimer *t = &clkevt->t; + void __iomem *ctrl = t->base + t->ctrl; + u32 l; + + l = readl_relaxed(ctrl); + if (l & OMAP_TIMER_CTRL_ST) { + l &= ~BIT(0); + writel_relaxed(l, ctrl); + /* Flush posted write */ + l = readl_relaxed(ctrl); + /* Wait for functional clock period x 3.5 */ + udelay(3500000 / t->rate + 1); + } + writel_relaxed(OMAP_TIMER_INT_OVERFLOW, t->base + t->irq_stat); + + return 0; +} + +static int dmtimer_set_periodic(struct clock_event_device *evt) +{ + struct dmtimer_clockevent *clkevt = to_dmtimer_clockevent(evt); + struct dmtimer_systimer *t = &clkevt->t; + void __iomem *pend = t->base + t->pend; + + dmtimer_clockevent_shutdown(evt); + + /* Looks like we need to first set the load value separately */ + writel_relaxed(clkevt->period, t->base + t->load); + while (readl_relaxed(pend) & WP_TLDR) + cpu_relax(); + + writel_relaxed(clkevt->period, t->base + t->counter); + while (readl_relaxed(pend) & WP_TCRR) + cpu_relax(); + + writel_relaxed(OMAP_TIMER_CTRL_AR | OMAP_TIMER_CTRL_ST, + t->base + t->ctrl); + while (readl_relaxed(pend) & WP_TCLR) + cpu_relax(); + + return 0; +} + +static void omap_clockevent_idle(struct clock_event_device *evt) +{ + struct dmtimer_clockevent *clkevt = to_dmtimer_clockevent(evt); + struct dmtimer_systimer *t = &clkevt->t; + + dmtimer_systimer_disable(t); +} + +static void omap_clockevent_unidle(struct clock_event_device *evt) +{ + struct dmtimer_clockevent *clkevt = to_dmtimer_clockevent(evt); + struct dmtimer_systimer *t = &clkevt->t; + + dmtimer_systimer_enable(t); + writel_relaxed(OMAP_TIMER_INT_OVERFLOW, t->base + t->irq_ena); + writel_relaxed(OMAP_TIMER_INT_OVERFLOW, t->base + t->wakeup); +} + +static int __init dmtimer_clockevent_init(struct device_node *np) +{ + struct dmtimer_clockevent *clkevt; + struct clock_event_device *dev; + struct dmtimer_systimer *t; + int error; + u32 pa; + + clkevt = kzalloc(sizeof(*clkevt), GFP_KERNEL); + if (!clkevt) + return -ENOMEM; + + t = &clkevt->t; + dev = &clkevt->dev; + + /* + * We mostly use cpuidle_coupled with ARM local timers for runtime, + * so there's probably no use for CLOCK_EVT_FEAT_DYNIRQ here. + */ + dev->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; + dev->rating = 300; + dev->set_next_event = dmtimer_set_next_event; + dev->set_state_shutdown = dmtimer_clockevent_shutdown; + dev->set_state_periodic = dmtimer_set_periodic; + dev->set_state_oneshot = dmtimer_clockevent_shutdown; + dev->tick_resume = dmtimer_clockevent_shutdown; + dev->cpumask = cpu_possible_mask; + + dev->irq = irq_of_parse_and_map(np, 0); + if (!dev->irq) { + error = -ENXIO; + goto err_out_free; + } + + error = dmtimer_systimer_setup(np, &clkevt->t); + if (error) + goto err_out_free; + + clkevt->period = 0xffffffff - DIV_ROUND_CLOSEST(t->rate, HZ); + + /* + * For clock-event timers we never read the timer counter and + * so we are not impacted by errata i103 and i767. Therefore, + * we can safely ignore this errata for clock-event timers. + */ + writel_relaxed(OMAP_TIMER_CTRL_POSTED, t->base + t->ifctrl); + + error = request_irq(dev->irq, dmtimer_clockevent_interrupt, + IRQF_TIMER, "clockevent", clkevt); + if (error) + goto err_out_unmap; + + writel_relaxed(OMAP_TIMER_INT_OVERFLOW, t->base + t->irq_ena); + writel_relaxed(OMAP_TIMER_INT_OVERFLOW, t->base + t->wakeup); + + pa = of_translate_address(np, of_get_address(np, 0, NULL, NULL)); + pr_info("TI gptimer clockevent: %s%lu Hz at %pOF\n", + of_find_property(np, "ti,timer-alwon", NULL) ? + "always-on " : "", t->rate, np->parent); + + clockevents_config_and_register(dev, t->rate, + 3, /* Timer internal resynch latency */ + 0xffffffff); + + if (of_device_is_compatible(np, "ti,am33xx") || + of_device_is_compatible(np, "ti,am43")) { + dev->suspend = omap_clockevent_idle; + dev->resume = omap_clockevent_unidle; + } + + return 0; + +err_out_unmap: + iounmap(t->base); + +err_out_free: + kfree(clkevt); + + return error; +} + +/* Clocksource */ +static struct dmtimer_clocksource * +to_dmtimer_clocksource(struct clocksource *cs) +{ + return container_of(cs, struct dmtimer_clocksource, dev); +} + +static u64 dmtimer_clocksource_read_cycles(struct clocksource *cs) +{ + struct dmtimer_clocksource *clksrc = to_dmtimer_clocksource(cs); + struct dmtimer_systimer *t = &clksrc->t; + + return (u64)readl_relaxed(t->base + t->counter); +} + +static void __iomem *dmtimer_sched_clock_counter; + +static u64 notrace dmtimer_read_sched_clock(void) +{ + return readl_relaxed(dmtimer_sched_clock_counter); +} + +static void dmtimer_clocksource_suspend(struct clocksource *cs) +{ + struct dmtimer_clocksource *clksrc = to_dmtimer_clocksource(cs); + struct dmtimer_systimer *t = &clksrc->t; + + clksrc->loadval = readl_relaxed(t->base + t->counter); + dmtimer_systimer_disable(t); +} + +static void dmtimer_clocksource_resume(struct clocksource *cs) +{ + struct dmtimer_clocksource *clksrc = to_dmtimer_clocksource(cs); + struct dmtimer_systimer *t = &clksrc->t; + + dmtimer_systimer_enable(t); + writel_relaxed(clksrc->loadval, t->base + t->counter); + writel_relaxed(OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, + t->base + t->ctrl); +} + +static int __init dmtimer_clocksource_init(struct device_node *np) +{ + struct dmtimer_clocksource *clksrc; + struct dmtimer_systimer *t; + struct clocksource *dev; + int error; + u32 pa; + + clksrc = kzalloc(sizeof(*clksrc), GFP_KERNEL); + if (!clksrc) + return -ENOMEM; + + dev = &clksrc->dev; + t = &clksrc->t; + + error = dmtimer_systimer_setup(np, t); + if (error) + goto err_out_free; + + dev->name = "dmtimer"; + dev->rating = 300; + dev->read = dmtimer_clocksource_read_cycles; + dev->mask = CLOCKSOURCE_MASK(32); + dev->flags = CLOCK_SOURCE_IS_CONTINUOUS; + + if (of_device_is_compatible(np, "ti,am33xx") || + of_device_is_compatible(np, "ti,am43")) { + dev->suspend = dmtimer_clocksource_suspend; + dev->resume = dmtimer_clocksource_resume; + } + + writel_relaxed(0, t->base + t->counter); + writel_relaxed(OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, + t->base + t->ctrl); + + pa = of_translate_address(np, of_get_address(np, 0, NULL, NULL)); + pr_info("TI gptimer clocksource: %s%pOF\n", + of_find_property(np, "ti,timer-alwon", NULL) ? + "always-on " : "", np->parent); + + if (!dmtimer_sched_clock_counter) { + dmtimer_sched_clock_counter = t->base + t->counter; + sched_clock_register(dmtimer_read_sched_clock, 32, t->rate); + } + + if (clocksource_register_hz(dev, t->rate)) + pr_err("Could not register clocksource %pOF\n", np); + + return 0; + +err_out_free: + kfree(clksrc); + + return -ENODEV; +} + +/* + * To detect between a clocksource and clockevent, we assume the device tree + * has no interrupts configured for a clocksource timer. + */ +static int __init dmtimer_systimer_init(struct device_node *np) +{ + const __be32 *addr; + u32 pa; + + /* One time init for the preferred timer configuration */ + if (!clocksource && !clockevent) + dmtimer_systimer_select_best(); + + if (!clocksource && !clockevent) { + pr_err("%s: unable to detectt system timers, update dtb?\n", + __func__); + + return -EINVAL; + } + + addr = of_get_address(np, 0, NULL, NULL); + pa = of_translate_address(np, addr); + if (!pa) + return -EINVAL; + + if (counter_32k <= 0 && clocksource == pa) + return dmtimer_clocksource_init(np); + + if (clockevent == pa) + return dmtimer_clockevent_init(np); + + return 0; +} + +TIMER_OF_DECLARE(systimer_omap2, "ti,omap2420-timer", dmtimer_systimer_init); +TIMER_OF_DECLARE(systimer_omap3, "ti,omap3430-timer", dmtimer_systimer_init); +TIMER_OF_DECLARE(systimer_omap4, "ti,omap4430-timer", dmtimer_systimer_init); +TIMER_OF_DECLARE(systimer_omap5, "ti,omap5430-timer", dmtimer_systimer_init); +TIMER_OF_DECLARE(systimer_am33x, "ti,am335x-timer", dmtimer_systimer_init); +TIMER_OF_DECLARE(systimer_am3ms, "ti,am335x-timer-1ms", dmtimer_systimer_init); +TIMER_OF_DECLARE(systimer_dm814, "ti,dm814-timer", dmtimer_systimer_init); +TIMER_OF_DECLARE(systimer_dm816, "ti,dm816-timer", dmtimer_systimer_init); |