summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/leds/leds-cr0014114.txt54
-rw-r--r--Documentation/devicetree/bindings/leds/leds-lm3601x.txt45
-rw-r--r--Documentation/devicetree/bindings/leds/leds-sc27xx-bltc.txt41
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt1
-rw-r--r--drivers/leds/Kconfig33
-rw-r--r--drivers/leds/Makefile3
-rw-r--r--drivers/leds/led-class.c10
-rw-r--r--drivers/leds/leds-cr0014114.c315
-rw-r--r--drivers/leds/leds-lm3601x.c487
-rw-r--r--drivers/leds/leds-sc27xx-bltc.c244
-rw-r--r--drivers/leds/leds-wm831x-status.c22
11 files changed, 1237 insertions, 18 deletions
diff --git a/Documentation/devicetree/bindings/leds/leds-cr0014114.txt b/Documentation/devicetree/bindings/leds/leds-cr0014114.txt
new file mode 100644
index 000000000000..4255b19ad25c
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-cr0014114.txt
@@ -0,0 +1,54 @@
+Crane Merchandising System - cr0014114 LED driver
+-------------------------------------------------
+
+This LED Board is widely used in vending machines produced
+by Crane Merchandising Systems.
+
+Required properties:
+- compatible: "crane,cr0014114"
+
+Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt
+apply. In particular, "reg" and "spi-max-frequency" properties must be given.
+
+LED sub-node properties:
+- label :
+ see Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger : (optional)
+ see Documentation/devicetree/bindings/leds/common.txt
+
+Example
+-------
+
+led-controller@0 {
+ compatible = "crane,cr0014114";
+ reg = <0>;
+ spi-max-frequency = <50000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "red:coin";
+ };
+ led@1 {
+ reg = <1>;
+ label = "green:coin";
+ };
+ led@2 {
+ reg = <2>;
+ label = "blue:coin";
+ };
+ led@3 {
+ reg = <3>;
+ label = "red:bill";
+ };
+ led@4 {
+ reg = <4>;
+ label = "green:bill";
+ };
+ led@5 {
+ reg = <5>;
+ label = "blue:bill";
+ };
+ ...
+};
diff --git a/Documentation/devicetree/bindings/leds/leds-lm3601x.txt b/Documentation/devicetree/bindings/leds/leds-lm3601x.txt
new file mode 100644
index 000000000000..a88b2c41e75b
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-lm3601x.txt
@@ -0,0 +1,45 @@
+* Texas Instruments - lm3601x Single-LED Flash Driver
+
+The LM3601X are ultra-small LED flash drivers that
+provide a high level of adjustability.
+
+Required properties:
+ - compatible : Can be one of the following
+ "ti,lm36010"
+ "ti,lm36011"
+ - reg : I2C slave address
+ - #address-cells : 1
+ - #size-cells : 0
+
+Required child properties:
+ - reg : 0 - Indicates a IR mode
+ 1 - Indicates a Torch (white LED) mode
+
+Required properties for flash LED child nodes:
+ See Documentation/devicetree/bindings/leds/common.txt
+ - flash-max-microamp : Range from 11mA - 1.5A
+ - flash-max-timeout-us : Range from 40ms - 1600ms
+ - led-max-microamp : Range from 2.4mA - 376mA
+
+Optional child properties:
+ - label : see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+led-controller@64 {
+ compatible = "ti,lm36010";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x64>;
+
+ led@0 {
+ reg = <1>;
+ label = "white:torch";
+ led-max-microamp = <376000>;
+ flash-max-microamp = <1500000>;
+ flash-max-timeout-us = <1600000>;
+ };
+}
+
+For more product information please see the links below:
+http://www.ti.com/product/LM36010
+http://www.ti.com/product/LM36011
diff --git a/Documentation/devicetree/bindings/leds/leds-sc27xx-bltc.txt b/Documentation/devicetree/bindings/leds/leds-sc27xx-bltc.txt
new file mode 100644
index 000000000000..dddf84f9c7ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-sc27xx-bltc.txt
@@ -0,0 +1,41 @@
+LEDs connected to Spreadtrum SC27XX PMIC breathing light controller
+
+The SC27xx breathing light controller supports to 3 outputs:
+red LED, green LED and blue LED. Each LED can work at normal
+PWM mode or breath light mode.
+
+Required properties:
+- compatible: Should be "sprd,sc2731-bltc".
+- #address-cells: Must be 1.
+- #size-cells: Must be 0.
+- reg: Specify the controller address.
+
+Required child properties:
+- reg: Port this LED is connected to.
+
+Optional child properties:
+- label: See Documentation/devicetree/bindings/leds/common.txt.
+
+Examples:
+
+led-controller@200 {
+ compatible = "sprd,sc2731-bltc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x200>;
+
+ led@0 {
+ label = "red";
+ reg = <0x0>;
+ };
+
+ led@1 {
+ label = "green";
+ reg = <0x1>;
+ };
+
+ led@2 {
+ label = "blue";
+ reg = <0x2>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index a38d8bfae19c..36003832c2a8 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -75,6 +75,7 @@ cnxt Conexant Systems, Inc.
compulab CompuLab Ltd.
cortina Cortina Systems, Inc.
cosmic Cosmic Circuits
+crane Crane Connectivity Solutions
creative Creative Technology Ltd
crystalfontz Crystalfontz America, Inc.
cubietech Cubietech, Ltd.
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 2c896c0e69e1..6e3a998f3370 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -104,6 +104,19 @@ config LEDS_CPCAP
This option enables support for LEDs offered by Motorola's
CPCAP PMIC.
+config LEDS_CR0014114
+ tristate "LED Support for Crane CR0014114"
+ depends on LEDS_CLASS
+ depends on SPI
+ depends on OF
+ help
+ This option enables support for CR0014114 LED Board which
+ is widely used in vending machines produced by
+ Crane Merchandising Systems.
+
+ To compile this driver as a module, choose M here: the module
+ will be called leds-cr0014114.
+
config LEDS_LM3530
tristate "LCD Backlight driver for LM3530"
depends on LEDS_CLASS
@@ -145,6 +158,15 @@ config LEDS_LM3692X
This option enables support for the TI LM3692x family
of white LED string drivers used for backlighting.
+config LEDS_LM3601X
+ tristate "LED support for LM3601x Chips"
+ depends on LEDS_CLASS && I2C
+ depends on LEDS_CLASS_FLASH
+ select REGMAP_I2C
+ help
+ This option enables support for the TI LM3601x family
+ of flash, torch and indicator classes.
+
config LEDS_LOCOMO
tristate "LED Support for Locomo device"
depends on LEDS_CLASS
@@ -647,6 +669,17 @@ config LEDS_IS31FL32XX
LED controllers. They are I2C devices with multiple constant-current
channels, each with independent 256-level PWM control.
+config LEDS_SC27XX_BLTC
+ tristate "LED support for the SC27xx breathing light controller"
+ depends on LEDS_CLASS && MFD_SC27XX_PMIC
+ depends on OF
+ help
+ Say Y here to include support for the SC27xx breathing light controller
+ LEDs.
+
+ This driver can also be built as a module. If so the module will be
+ called leds-sc27xx-bltc.
+
comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)"
config LEDS_BLINKM
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 91eca81cae82..420b5d2cfa62 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -76,8 +76,11 @@ obj-$(CONFIG_LEDS_MLXREG) += leds-mlxreg.o
obj-$(CONFIG_LEDS_NIC78BX) += leds-nic78bx.o
obj-$(CONFIG_LEDS_MT6323) += leds-mt6323.o
obj-$(CONFIG_LEDS_LM3692X) += leds-lm3692x.o
+obj-$(CONFIG_LEDS_SC27XX_BLTC) += leds-sc27xx-bltc.o
+obj-$(CONFIG_LEDS_LM3601X) += leds-lm3601x.o
# LED SPI Drivers
+obj-$(CONFIG_LEDS_CR0014114) += leds-cr0014114.o
obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
# LED Userspace Drivers
diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index b0e2d55acbd6..3c7e3487b373 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -260,10 +260,14 @@ int of_led_classdev_register(struct device *parent, struct device_node *np,
if (ret < 0)
return ret;
+ mutex_init(&led_cdev->led_access);
+ mutex_lock(&led_cdev->led_access);
led_cdev->dev = device_create_with_groups(leds_class, parent, 0,
led_cdev, led_cdev->groups, "%s", name);
- if (IS_ERR(led_cdev->dev))
+ if (IS_ERR(led_cdev->dev)) {
+ mutex_unlock(&led_cdev->led_access);
return PTR_ERR(led_cdev->dev);
+ }
led_cdev->dev->of_node = np;
if (ret)
@@ -274,6 +278,7 @@ int of_led_classdev_register(struct device *parent, struct device_node *np,
ret = led_add_brightness_hw_changed(led_cdev);
if (ret) {
device_unregister(led_cdev->dev);
+ mutex_unlock(&led_cdev->led_access);
return ret;
}
}
@@ -285,7 +290,6 @@ int of_led_classdev_register(struct device *parent, struct device_node *np,
#ifdef CONFIG_LEDS_BRIGHTNESS_HW_CHANGED
led_cdev->brightness_hw_changed = -1;
#endif
- mutex_init(&led_cdev->led_access);
/* add to the list of leds */
down_write(&leds_list_lock);
list_add_tail(&led_cdev->node, &leds_list);
@@ -302,6 +306,8 @@ int of_led_classdev_register(struct device *parent, struct device_node *np,
led_trigger_set_default(led_cdev);
#endif
+ mutex_unlock(&led_cdev->led_access);
+
dev_dbg(parent, "Registered led device: %s\n",
led_cdev->name);
diff --git a/drivers/leds/leds-cr0014114.c b/drivers/leds/leds-cr0014114.c
new file mode 100644
index 000000000000..a4b1c1dcce7f
--- /dev/null
+++ b/drivers/leds/leds-cr0014114.c
@@ -0,0 +1,315 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Crane Merchandising Systems. All rights reserved.
+// Copyright (C) 2018 Oleh Kravchenko <oleg@kaa.org.ua>
+
+#include <linux/delay.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/spi/spi.h>
+#include <linux/workqueue.h>
+#include <uapi/linux/uleds.h>
+
+/*
+ * CR0014114 SPI protocol descrtiption:
+ * +----+-----------------------------------+----+
+ * | CMD| BRIGHTNESS |CRC |
+ * +----+-----------------------------------+----+
+ * | | LED0| LED1| LED2| LED3| LED4| LED5| |
+ * | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |
+ * | |R|G|B|R|G|B|R|G|B|R|G|B|R|G|B|R|G|B| |
+ * | 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ 1 |
+ * | |1|1|1|1|1|1|1|1|1|1|1|1|1|1|1|1|1|1| |
+ * | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |
+ * | | 18 | |
+ * +----+-----------------------------------+----+
+ * | 20 |
+ * +---------------------------------------------+
+ *
+ * PS: Boards can be connected to the chain:
+ * SPI -> board0 -> board1 -> board2 ..
+ */
+
+/* CR0014114 SPI commands */
+#define CR_SET_BRIGHTNESS 0x80
+#define CR_INIT_REENUMERATE 0x81
+#define CR_NEXT_REENUMERATE 0x82
+
+/* CR0014114 default settings */
+#define CR_MAX_BRIGHTNESS GENMASK(6, 0)
+#define CR_FW_DELAY_MSEC 10
+#define CR_RECOUNT_DELAY (HZ * 3600)
+
+struct cr0014114_led {
+ char name[LED_MAX_NAME_SIZE];
+ struct cr0014114 *priv;
+ struct led_classdev ldev;
+ u8 brightness;
+};
+
+struct cr0014114 {
+ bool do_recount;
+ size_t count;
+ struct delayed_work work;
+ struct device *dev;
+ struct mutex lock;
+ struct spi_device *spi;
+ u8 *buf;
+ unsigned long delay;
+ struct cr0014114_led leds[];
+};
+
+static void cr0014114_calc_crc(u8 *buf, const size_t len)
+{
+ size_t i;
+ u8 crc;
+
+ for (i = 1, crc = 1; i < len - 1; i++)
+ crc += buf[i];
+ crc |= BIT(7);
+
+ /* special case when CRC matches the SPI commands */
+ if (crc == CR_SET_BRIGHTNESS ||
+ crc == CR_INIT_REENUMERATE ||
+ crc == CR_NEXT_REENUMERATE)
+ crc = 0xfe;
+
+ buf[len - 1] = crc;
+}
+
+static int cr0014114_recount(struct cr0014114 *priv)
+{
+ int ret;
+ size_t i;
+ u8 cmd;
+
+ dev_dbg(priv->dev, "LEDs recount is started\n");
+
+ cmd = CR_INIT_REENUMERATE;
+ ret = spi_write(priv->spi, &cmd, sizeof(cmd));
+ if (ret)
+ goto err;
+
+ cmd = CR_NEXT_REENUMERATE;
+ for (i = 0; i < priv->count; i++) {
+ msleep(CR_FW_DELAY_MSEC);
+
+ ret = spi_write(priv->spi, &cmd, sizeof(cmd));
+ if (ret)
+ goto err;
+ }
+
+err:
+ dev_dbg(priv->dev, "LEDs recount is finished\n");
+
+ if (ret)
+ dev_err(priv->dev, "with error %d", ret);
+
+ return ret;
+}
+
+static int cr0014114_sync(struct cr0014114 *priv)
+{
+ int ret;
+ size_t i;
+ unsigned long udelay, now = jiffies;
+
+ /* to avoid SPI mistiming with firmware we should wait some time */
+ if (time_after(priv->delay, now)) {
+ udelay = jiffies_to_usecs(priv->delay - now);
+ usleep_range(udelay, udelay + 1);
+ }
+
+ if (unlikely(priv->do_recount)) {
+ ret = cr0014114_recount(priv);
+ if (ret)
+ goto err;
+
+ priv->do_recount = false;
+ msleep(CR_FW_DELAY_MSEC);
+ }
+
+ priv->buf[0] = CR_SET_BRIGHTNESS;
+ for (i = 0; i < priv->count; i++)
+ priv->buf[i + 1] = priv->leds[i].brightness;
+ cr0014114_calc_crc(priv->buf, priv->count + 2);
+ ret = spi_write(priv->spi, priv->buf, priv->count + 2);
+
+err:
+ priv->delay = jiffies + msecs_to_jiffies(CR_FW_DELAY_MSEC);
+
+ return ret;
+}
+
+static void cr0014114_recount_work(struct work_struct *work)
+{
+ int ret;
+ struct cr0014114 *priv = container_of(work,
+ struct cr0014114,
+ work.work);
+
+ mutex_lock(&priv->lock);
+ priv->do_recount = true;
+ ret = cr0014114_sync(priv);
+ mutex_unlock(&priv->lock);
+
+ if (ret)
+ dev_warn(priv->dev, "sync of LEDs failed %d\n", ret);
+
+ schedule_delayed_work(&priv->work, CR_RECOUNT_DELAY);
+}
+
+static int cr0014114_set_sync(struct led_classdev *ldev,
+ enum led_brightness brightness)
+{
+ int ret;
+ struct cr0014114_led *led = container_of(ldev,
+ struct cr0014114_led,
+ ldev);
+
+ dev_dbg(led->priv->dev, "Set brightness of %s to %d\n",
+ led->name, brightness);
+
+ mutex_lock(&led->priv->lock);
+ led->brightness = (u8)brightness;
+ ret = cr0014114_sync(led->priv);
+ mutex_unlock(&led->priv->lock);
+
+ return ret;
+}
+
+static int cr0014114_probe_dt(struct cr0014114 *priv)
+{
+ size_t i = 0;
+ struct cr0014114_led *led;
+ struct fwnode_handle *child;
+ struct device_node *np;
+ int ret;
+ const char *str;
+
+ device_for_each_child_node(priv->dev, child) {
+ np = to_of_node(child);
+ led = &priv->leds[i];
+
+ ret = fwnode_property_read_string(child, "label", &str);
+ if (ret)
+ snprintf(led->name, sizeof(led->name),
+ "cr0014114::");
+ else
+ snprintf(led->name, sizeof(led->name),
+ "cr0014114:%s", str);
+
+ fwnode_property_read_string(child, "linux,default-trigger",
+ &led->ldev.default_trigger);
+
+ led->priv = priv;
+ led->ldev.name = led->name;
+ led->ldev.max_brightness = CR_MAX_BRIGHTNESS;
+ led->ldev.brightness_set_blocking = cr0014114_set_sync;
+
+ ret = devm_of_led_classdev_register(priv->dev, np,
+ &led->ldev);
+ if (ret) {
+ dev_err(priv->dev,
+ "failed to register LED device %s, err %d",
+ led->name, ret);
+ fwnode_handle_put(child);
+ return ret;
+ }
+
+ led->ldev.dev->of_node = np;
+
+ i++;
+ }
+
+ return 0;
+}
+
+static int cr0014114_probe(struct spi_device *spi)
+{
+ struct cr0014114 *priv;
+ size_t count;
+ int ret;
+
+ count = device_get_child_node_count(&spi->dev);
+ if (!count) {
+ dev_err(&spi->dev, "LEDs are not defined in device tree!");
+ return -ENODEV;
+ }
+
+ priv = devm_kzalloc(&spi->dev,
+ sizeof(*priv) + sizeof(*priv->leds) * count,
+ GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->buf = devm_kzalloc(&spi->dev, count + 2, GFP_KERNEL);
+ if (!priv->buf)
+ return -ENOMEM;
+
+ mutex_init(&priv->lock);
+ INIT_DELAYED_WORK(&priv->work, cr0014114_recount_work);
+ priv->count = count;
+ priv->dev = &spi->dev;
+ priv->spi = spi;
+ priv->delay = jiffies -
+ msecs_to_jiffies(CR_FW_DELAY_MSEC);
+
+ priv->do_recount = true;
+ ret = cr0014114_sync(priv);
+ if (ret) {
+ dev_err(priv->dev, "first recount failed %d\n", ret);
+ return ret;
+ }
+
+ priv->do_recount = true;
+ ret = cr0014114_sync(priv);
+ if (ret) {
+ dev_err(priv->dev, "second recount failed %d\n", ret);
+ return ret;
+ }
+
+ ret = cr0014114_probe_dt(priv);
+ if (ret)
+ return ret;
+
+ /* setup recount work to workaround buggy firmware */
+ schedule_delayed_work(&priv->work, CR_RECOUNT_DELAY);
+
+ spi_set_drvdata(spi, priv);
+
+ return 0;
+}
+
+static int cr0014114_remove(struct spi_device *spi)
+{
+ struct cr0014114 *priv = spi_get_drvdata(spi);
+
+ cancel_delayed_work_sync(&priv->work);
+ mutex_destroy(&priv->lock);
+
+ return 0;
+}
+
+static const struct of_device_id cr0014114_dt_ids[] = {
+ { .compatible = "crane,cr0014114", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, cr0014114_dt_ids);
+
+static struct spi_driver cr0014114_driver = {
+ .probe = cr0014114_probe,
+ .remove = cr0014114_remove,
+ .driver = {
+ .name = KBUILD_MODNAME,
+ .of_match_table = cr0014114_dt_ids,
+ },
+};
+
+module_spi_driver(cr0014114_driver);
+
+MODULE_AUTHOR("Oleh Kravchenko <oleg@kaa.org.ua>");
+MODULE_DESCRIPTION("cr0014114 LED driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("spi:cr0014114");
diff --git a/drivers/leds/leds-lm3601x.c b/drivers/leds/leds-lm3601x.c
new file mode 100644
index 000000000000..081aa71e43a3
--- /dev/null
+++ b/drivers/leds/leds-lm3601x.c
@@ -0,0 +1,487 @@
+// SPDX-License-Identifier: GPL-2.0
+// Flash and torch driver for Texas Instruments LM3601X LED
+// Flash driver chip family
+// Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/led-class-flash.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <uapi/linux/uleds.h>
+
+#define LM3601X_LED_IR 0x0
+#define LM3601X_LED_TORCH 0x1
+
+/* Registers */
+#define LM3601X_ENABLE_REG 0x01
+#define LM3601X_CFG_REG 0x02
+#define LM3601X_LED_FLASH_REG 0x03
+#define LM3601X_LED_TORCH_REG 0x04
+#define LM3601X_FLAGS_REG 0x05
+#define LM3601X_DEV_ID_REG 0x06
+
+#define LM3601X_SW_RESET BIT(7)
+
+/* Enable Mode bits */
+#define LM3601X_MODE_STANDBY 0x00
+#define LM3601X_MODE_IR_DRV BIT(0)
+#define LM3601X_MODE_TORCH BIT(1)
+#define LM3601X_MODE_STROBE (BIT(0) | BIT(1))
+#define LM3601X_STRB_EN BIT(2)
+#define LM3601X_STRB_EDGE_TRIG BIT(3)
+#define LM3601X_IVFM_EN BIT(4)
+
+#define LM36010_BOOST_LIMIT_28 BIT(5)
+#define LM36010_BOOST_FREQ_4MHZ BIT(6)
+#define LM36010_BOOST_MODE_PASS BIT(7)
+
+/* Flag Mask */
+#define LM3601X_FLASH_TIME_OUT BIT(0)
+#define LM3601X_UVLO_FAULT BIT(1)
+#define LM3601X_THERM_SHUTDOWN BIT(2)
+#define LM3601X_THERM_CURR BIT(3)
+#define LM36010_CURR_LIMIT BIT(4)
+#define LM3601X_SHORT_FAULT BIT(5)
+#define LM3601X_IVFM_TRIP BIT(6)
+#define LM36010_OVP_FAULT BIT(7)
+
+#define LM3601X_MAX_TORCH_I_UA 376000
+#define LM3601X_MIN_TORCH_I_UA 2400
+#define LM3601X_TORCH_REG_DIV 2965
+
+#define LM3601X_MAX_STROBE_I_UA 1500000
+#define LM3601X_MIN_STROBE_I_UA 11000
+#define LM3601X_STROBE_REG_DIV 11800
+
+#define LM3601X_TIMEOUT_MASK 0x1e
+#define LM3601X_ENABLE_MASK (LM3601X_MODE_IR_DRV | LM3601X_MODE_TORCH)
+
+#define LM3601X_LOWER_STEP_US 40000
+#define LM3601X_UPPER_STEP_US 200000
+#define LM3601X_MIN_TIMEOUT_US 40000
+#define LM3601X_MAX_TIMEOUT_US 1600000
+#define LM3601X_TIMEOUT_XOVER_US 400000
+
+enum lm3601x_type {
+ CHIP_LM36010 = 0,
+ CHIP_LM36011,
+};
+
+/**
+ * struct lm3601x_led -
+ * @fled_cdev: flash LED class device pointer
+ * @client: Pointer to the I2C client
+ * @regmap: Devices register map
+ * @lock: Lock for reading/writing the device
+ * @led_name: LED label for the Torch or IR LED
+ * @flash_timeout: the timeout for the flash
+ * @last_flag: last known flags register value
+ * @torch_current_max: maximum current for the torch
+ * @flash_current_max: maximum current for the flash
+ * @max_flash_timeout: maximum timeout for the flash
+ * @led_mode: The mode to enable either IR or Torch
+ */
+struct lm3601x_led {
+ struct led_classdev_flash fled_cdev;
+ struct i2c_client *client;
+ struct regmap *regmap;
+ struct mutex lock;
+
+ char led_name[LED_MAX_NAME_SIZE];
+
+ unsigned int flash_timeout;
+ unsigned int last_flag;
+
+ u32 torch_current_max;
+ u32 flash_current_max;
+ u32 max_flash_timeout;
+
+ u32 led_mode;
+};
+
+static const struct reg_default lm3601x_regmap_defs[] = {
+ { LM3601X_ENABLE_REG, 0x20 },
+ { LM3601X_CFG_REG, 0x15 },
+ { LM3601X_LED_FLASH_REG, 0x00 },
+ { LM3601X_LED_TORCH_REG, 0x00 },
+};
+
+static bool lm3601x_volatile_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case LM3601X_FLAGS_REG:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static const struct regmap_config lm3601x_regmap = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = LM3601X_DEV_ID_REG,
+ .reg_defaults = lm3601x_regmap_defs,
+ .num_reg_defaults = ARRAY_SIZE(lm3601x_regmap_defs),
+ .cache_type = REGCACHE_RBTREE,
+ .volatile_reg = lm3601x_volatile_reg,
+};
+
+static struct lm3601x_led *fled_cdev_to_led(struct led_classdev_flash *fled_cdev)
+{
+ return container_of(fled_cdev, struct lm3601x_led, fled_cdev);
+}
+
+static int lm3601x_read_faults(struct lm3601x_led *led)
+{
+ int flags_val;
+ int ret;
+
+ ret = regmap_read(led->regmap, LM3601X_FLAGS_REG, &flags_val);
+ if (ret < 0)
+ return -EIO;
+
+ led->last_flag = 0;
+
+ if (flags_val & LM36010_OVP_FAULT)
+ led->last_flag |= LED_FAULT_OVER_VOLTAGE;
+
+ if (flags_val & (LM3601X_THERM_SHUTDOWN | LM3601X_THERM_CURR))
+ led->last_flag |= LED_FAULT_OVER_TEMPERATURE;
+
+ if (flags_val & LM3601X_SHORT_FAULT)
+ led->last_flag |= LED_FAULT_SHORT_CIRCUIT;
+
+ if (flags_val & LM36010_CURR_LIMIT)
+ led->last_flag |= LED_FAULT_OVER_CURRENT;
+
+ if (flags_val & LM3601X_UVLO_FAULT)
+ led->last_flag |= LED_FAULT_UNDER_VOLTAGE;
+
+ if (flags_val & LM3601X_IVFM_TRIP)
+ led->last_flag |= LED_FAULT_INPUT_VOLTAGE;
+
+ if (flags_val & LM3601X_THERM_SHUTDOWN)
+ led->last_flag |= LED_FAULT_LED_OVER_TEMPERATURE;
+
+ return led->last_flag;
+}
+
+static int lm3601x_brightness_set(struct led_classdev *cdev,
+ enum led_brightness brightness)
+{
+ struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(cdev);
+ struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
+ int ret, led_mode_val;
+
+ mutex_lock(&led->lock);
+
+ ret = lm3601x_read_faults(led);
+ if (ret < 0)
+ goto out;
+
+ if (led->led_mode == LM3601X_LED_TORCH)
+ led_mode_val = LM3601X_MODE_TORCH;
+ else
+ led_mode_val = LM3601X_MODE_IR_DRV;
+
+ if (brightness == LED_OFF) {
+ ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
+ led_mode_val, LED_OFF);
+ goto out;
+ }
+
+ ret = regmap_write(led->regmap, LM3601X_LED_TORCH_REG, brightness);
+ if (ret < 0)
+ goto out;
+
+ ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
+ LM3601X_MODE_TORCH | LM3601X_MODE_IR_DRV,
+ led_mode_val);
+out:
+ mutex_unlock(&led->lock);
+ return ret;
+}
+
+static int lm3601x_strobe_set(struct led_classdev_flash *fled_cdev,
+ bool state)
+{
+ struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
+ int timeout_reg_val;
+ int current_timeout;
+ int ret;
+
+ mutex_lock(&led->lock);
+
+ ret = regmap_read(led->regmap, LM3601X_CFG_REG, &current_timeout);
+ if (ret < 0)
+ goto out;
+
+ if (led->flash_timeout >= LM3601X_TIMEOUT_XOVER_US)
+ timeout_reg_val = led->flash_timeout / LM3601X_UPPER_STEP_US + 0x07;
+ else
+ timeout_reg_val = led->flash_timeout / LM3601X_LOWER_STEP_US - 0x01;
+
+ if (led->flash_timeout != current_timeout)
+ ret = regmap_update_bits(led->regmap, LM3601X_CFG_REG,
+ LM3601X_TIMEOUT_MASK, timeout_reg_val);
+
+ if (state)
+ ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
+ LM3601X_MODE_TORCH | LM3601X_MODE_IR_DRV,
+ LM3601X_MODE_STROBE);
+ else
+ ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
+ LM3601X_MODE_STROBE, LED_OFF);
+
+ ret = lm3601x_read_faults(led);
+out:
+ mutex_unlock(&led->lock);
+ return ret;
+}
+
+static int lm3601x_flash_brightness_set(struct led_classdev_flash *fled_cdev,
+ u32 brightness)
+{
+ struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
+ u8 brightness_val;
+ int ret;
+
+ mutex_lock(&led->lock);
+ ret = lm3601x_read_faults(led);
+ if (ret < 0)
+ goto out;
+
+ if (brightness == LED_OFF) {
+ ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
+ LM3601X_MODE_STROBE, LED_OFF);
+ goto out;
+ }
+
+ brightness_val = brightness / LM3601X_STROBE_REG_DIV;
+
+ ret = regmap_write(led->regmap, LM3601X_LED_FLASH_REG, brightness_val);
+out:
+ mutex_unlock(&led->lock);
+ return ret;
+}
+
+static int lm3601x_flash_timeout_set(struct led_classdev_flash *fled_cdev,
+ u32 timeout)
+{
+ struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
+
+ mutex_lock(&led->lock);
+
+ led->flash_timeout = timeout;
+
+ mutex_unlock(&led->lock);
+
+ return 0;
+}
+
+static int lm3601x_strobe_get(struct led_classdev_flash *fled_cdev, bool *state)
+{
+ struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
+ int strobe_state;
+ int ret;
+
+ mutex_lock(&led->lock);
+
+ ret = regmap_read(led->regmap, LM3601X_ENABLE_REG, &strobe_state);
+ if (ret < 0)
+ goto out;
+
+ *state = strobe_state & LM3601X_MODE_STROBE;
+
+out:
+ mutex_unlock(&led->lock);
+ return ret;
+}
+
+static int lm3601x_flash_fault_get(struct led_classdev_flash *fled_cdev,
+ u32 *fault)
+{
+ struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
+
+ lm3601x_read_faults(led);
+
+ *fault = led->last_flag;
+
+ return 0;
+}
+
+static const struct led_flash_ops flash_ops = {
+ .flash_brightness_set = lm3601x_flash_brightness_set,
+ .strobe_set = lm3601x_strobe_set,
+ .strobe_get = lm3601x_strobe_get,
+ .timeout_set = lm3601x_flash_timeout_set,
+ .fault_get = lm3601x_flash_fault_get,
+};
+
+static int lm3601x_register_leds(struct lm3601x_led *led)
+{
+ struct led_classdev *led_cdev;
+ struct led_flash_setting *setting;
+
+ led->fled_cdev.ops = &flash_ops;
+
+ setting = &led->fled_cdev.timeout;
+ setting->min = LM3601X_MIN_TIMEOUT_US;
+ setting->max = led->max_flash_timeout;
+ setting->step = LM3601X_LOWER_STEP_US;
+ setting->val = led->max_flash_timeout;
+
+ setting = &led->fled_cdev.brightness;
+ setting->min = LM3601X_MIN_STROBE_I_UA;
+ setting->max = led->flash_current_max;
+ setting->step = LM3601X_TORCH_REG_DIV;
+ setting->val = led->flash_current_max;
+
+ led_cdev = &led->fled_cdev.led_cdev;
+ led_cdev->name = led->led_name;
+ led_cdev->brightness_set_blocking = lm3601x_brightness_set;
+ led_cdev->max_brightness = DIV_ROUND_UP(led->torch_current_max,
+ LM3601X_TORCH_REG_DIV);
+ led_cdev->flags |= LED_DEV_CAP_FLASH;
+
+ return led_classdev_flash_register(&led->client->dev, &led->fled_cdev);
+}
+
+static int lm3601x_parse_node(struct lm3601x_led *led)
+{
+ struct fwnode_handle *child = NULL;
+ int ret = -ENODEV;
+ const char *name;
+
+ child = device_get_next_child_node(&led->client->dev, child);
+ if (!child) {
+ dev_err(&led->client->dev, "No LED Child node\n");
+ return ret;
+ }
+
+ ret = fwnode_property_read_u32(child, "reg", &led->led_mode);
+ if (ret) {
+ dev_err(&led->client->dev, "reg DT property missing\n");
+ goto out_err;
+ }
+
+ if (led->led_mode > LM3601X_LED_TORCH ||
+ led->led_mode < LM3601X_LED_IR) {
+ dev_warn(&led->client->dev, "Invalid led mode requested\n");
+ ret = -EINVAL;
+ goto out_err;
+ }
+
+ ret = fwnode_property_read_string(child, "label", &name);
+ if (ret) {
+ if (led->led_mode == LM3601X_LED_TORCH)
+ name = "torch";
+ else
+ name = "infrared";
+ }
+
+ snprintf(led->led_name, sizeof(led->led_name),
+ "%s:%s", led->client->name, name);
+
+ ret = fwnode_property_read_u32(child, "led-max-microamp",
+ &led->torch_current_max);
+ if (ret) {
+ dev_warn(&led->client->dev,
+ "led-max-microamp DT property missing\n");
+ goto out_err;
+ }
+
+ ret = fwnode_property_read_u32(child, "flash-max-microamp",
+ &led->flash_current_max);
+ if (ret) {
+ dev_warn(&led->client->dev,
+ "flash-max-microamp DT property missing\n");
+ goto out_err;
+ }
+
+ ret = fwnode_property_read_u32(child, "flash-max-timeout-us",
+ &led->max_flash_timeout);
+ if (ret) {
+ dev_warn(&led->client->dev,
+ "flash-max-timeout-us DT property missing\n");
+ goto out_err;
+ }
+
+out_err:
+ fwnode_handle_put(child);
+ return ret;
+}
+
+static int lm3601x_probe(struct i2c_client *client)
+{
+ struct lm3601x_led *led;
+ int ret;
+
+ led = devm_kzalloc(&client->dev, sizeof(*led), GFP_KERNEL);
+ if (!led)
+ return -ENOMEM;
+
+ led->client = client;
+ i2c_set_clientdata(client, led);
+
+ ret = lm3601x_parse_node(led);
+ if (ret)
+ return -ENODEV;
+
+ led->regmap = devm_regmap_init_i2c(client, &lm3601x_regmap);
+ if (IS_ERR(led->regmap)) {
+ ret = PTR_ERR(led->regmap);
+ dev_err(&client->dev,
+ "Failed to allocate register map: %d\n", ret);
+ return ret;
+ }
+
+ mutex_init(&led->lock);
+
+ return lm3601x_register_leds(led);
+}
+
+static int lm3601x_remove(struct i2c_client *client)
+{
+ struct lm3601x_led *led = i2c_get_clientdata(client);
+
+ led_classdev_flash_unregister(&led->fled_cdev);
+ mutex_destroy(&led->lock);
+
+ return regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
+ LM3601X_ENABLE_MASK,
+ LM3601X_MODE_STANDBY);
+}
+
+static const struct i2c_device_id lm3601x_id[] = {
+ { "LM36010", CHIP_LM36010 },
+ { "LM36011", CHIP_LM36011 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, lm3601x_id);
+
+static const struct of_device_id of_lm3601x_leds_match[] = {
+ { .compatible = "ti,lm36010", },
+ { .compatible = "ti,lm36011", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, of_lm3601x_leds_match);
+
+static struct i2c_driver lm3601x_i2c_driver = {
+ .driver = {
+ .name = "lm3601x",
+ .of_match_table = of_lm3601x_leds_match,
+ },
+ .probe_new = lm3601x_probe,
+ .remove = lm3601x_remove,
+ .id_table = lm3601x_id,
+};
+module_i2c_driver(lm3601x_i2c_driver);
+
+MODULE_DESCRIPTION("Texas Instruments Flash Lighting driver for LM3601X");
+MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/leds-sc27xx-bltc.c b/drivers/leds/leds-sc27xx-bltc.c
new file mode 100644
index 000000000000..9d9b7aab843f
--- /dev/null
+++ b/drivers/leds/leds-sc27xx-bltc.c
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2018 Spreadtrum Communications Inc.
+
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <uapi/linux/uleds.h>
+
+/* PMIC global control register definition */
+#define SC27XX_MODULE_EN0 0xc08
+#define SC27XX_CLK_EN0 0xc18
+#define SC27XX_RGB_CTRL 0xebc
+
+#define SC27XX_BLTC_EN BIT(9)
+#define SC27XX_RTC_EN BIT(7)
+#define SC27XX_RGB_PD BIT(0)
+
+/* Breathing light controller register definition */
+#define SC27XX_LEDS_CTRL 0x00
+#define SC27XX_LEDS_PRESCALE 0x04
+#define SC27XX_LEDS_DUTY 0x08
+#define SC27XX_LEDS_CURVE0 0x0c
+#define SC27XX_LEDS_CURVE1 0x10
+
+#define SC27XX_CTRL_SHIFT 4
+#define SC27XX_LED_RUN BIT(0)
+#define SC27XX_LED_TYPE BIT(1)
+
+#define SC27XX_DUTY_SHIFT 8
+#define SC27XX_DUTY_MASK GENMASK(15, 0)
+#define SC27XX_MOD_MASK GENMASK(7, 0)
+
+#define SC27XX_LEDS_OFFSET 0x10
+#define SC27XX_LEDS_MAX 3
+
+struct sc27xx_led {
+ char name[LED_MAX_NAME_SIZE];
+ struct led_classdev ldev;
+ struct sc27xx_led_priv *priv;
+ u8 line;
+ bool active;
+};
+
+struct sc27xx_led_priv {
+ struct sc27xx_led leds[SC27XX_LEDS_MAX];
+ struct regmap *regmap;
+ struct mutex lock;
+ u32 base;
+};
+
+#define to_sc27xx_led(ldev) \
+ container_of(ldev, struct sc27xx_led, ldev)
+
+static int sc27xx_led_init(struct regmap *regmap)
+{
+ int err;
+
+ err = regmap_update_bits(regmap, SC27XX_MODULE_EN0, SC27XX_BLTC_EN,
+ SC27XX_BLTC_EN);
+ if (err)
+ return err;
+
+ err = regmap_update_bits(regmap, SC27XX_CLK_EN0, SC27XX_RTC_EN,
+ SC27XX_RTC_EN);
+ if (err)
+ return err;
+
+ return regmap_update_bits(regmap, SC27XX_RGB_CTRL, SC27XX_RGB_PD, 0);
+}
+
+static u32 sc27xx_led_get_offset(struct sc27xx_led *leds)
+{
+ return leds->priv->base + SC27XX_LEDS_OFFSET * leds->line;
+}
+
+static int sc27xx_led_enable(struct sc27xx_led *leds, enum led_brightness value)
+{
+ u32 base = sc27xx_led_get_offset(leds);
+ u32 ctrl_base = leds->priv->base + SC27XX_LEDS_CTRL;
+ u8 ctrl_shift = SC27XX_CTRL_SHIFT * leds->line;
+ struct regmap *regmap = leds->priv->regmap;
+ int err;
+
+ err = regmap_update_bits(regmap, base + SC27XX_LEDS_DUTY,
+ SC27XX_DUTY_MASK,
+ (value << SC27XX_DUTY_SHIFT) |
+ SC27XX_MOD_MASK);
+ if (err)
+ return err;
+
+ return regmap_update_bits(regmap, ctrl_base,
+ (SC27XX_LED_RUN | SC27XX_LED_TYPE) << ctrl_shift,
+ (SC27XX_LED_RUN | SC27XX_LED_TYPE) << ctrl_shift);
+}
+
+static int sc27xx_led_disable(struct sc27xx_led *leds)
+{
+ struct regmap *regmap = leds->priv->regmap;
+ u32 ctrl_base = leds->priv->base + SC27XX_LEDS_CTRL;
+ u8 ctrl_shift = SC27XX_CTRL_SHIFT * leds->line;
+
+ return regmap_update_bits(regmap, ctrl_base,
+ (SC27XX_LED_RUN | SC27XX_LED_TYPE) << ctrl_shift, 0);
+}
+
+static int sc27xx_led_set(struct led_classdev *ldev, enum led_brightness value)
+{
+ struct sc27xx_led *leds = to_sc27xx_led(ldev);
+ int err;
+
+ mutex_lock(&leds->priv->lock);
+
+ if (value == LED_OFF)
+ err = sc27xx_led_disable(leds);
+ else
+ err = sc27xx_led_enable(leds, value);
+
+ mutex_unlock(&leds->priv->lock);
+
+ return err;
+}
+
+static int sc27xx_led_register(struct device *dev, struct sc27xx_led_priv *priv)
+{
+ int i, err;
+
+ err = sc27xx_led_init(priv->regmap);
+ if (err)
+ return err;
+
+ for (i = 0; i < SC27XX_LEDS_MAX; i++) {
+ struct sc27xx_led *led = &priv->leds[i];
+
+ if (!led->active)
+ continue;
+
+ led->line = i;
+ led->priv = priv;
+ led->ldev.name = led->name;
+ led->ldev.brightness_set_blocking = sc27xx_led_set;
+
+ err = devm_led_classdev_register(dev, &led->ldev);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
+static int sc27xx_led_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node, *child;
+ struct sc27xx_led_priv *priv;
+ const char *str;
+ u32 base, count, reg;
+ int err;
+
+ count = of_get_child_count(np);
+ if (!count || count > SC27XX_LEDS_MAX)
+ return -EINVAL;
+
+ err = of_property_read_u32(np, "reg", &base);
+ if (err) {
+ dev_err(dev, "fail to get reg of property\n");
+ return err;
+ }
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, priv);
+ mutex_init(&priv->lock);
+ priv->base = base;
+ priv->regmap = dev_get_regmap(dev->parent, NULL);
+ if (!priv->regmap) {
+ err = -ENODEV;
+ dev_err(dev, "failed to get regmap: %d\n", err);
+ return err;
+ }
+
+ for_each_child_of_node(np, child) {
+ err = of_property_read_u32(child, "reg", &reg);
+ if (err) {
+ of_node_put(child);
+ mutex_destroy(&priv->lock);
+ return err;
+ }
+
+ if (reg >= SC27XX_LEDS_MAX || priv->leds[reg].active) {
+ of_node_put(child);
+ mutex_destroy(&priv->lock);
+ return -EINVAL;
+ }
+
+ priv->leds[reg].active = true;
+
+ err = of_property_read_string(child, "label", &str);
+ if (err)
+ snprintf(priv->leds[reg].name, LED_MAX_NAME_SIZE,
+ "sc27xx::");
+ else
+ snprintf(priv->leds[reg].name, LED_MAX_NAME_SIZE,
+ "sc27xx:%s", str);
+ }
+
+ err = sc27xx_led_register(dev, priv);
+ if (err)
+ mutex_destroy(&priv->lock);
+
+ return err;
+}
+
+static int sc27xx_led_remove(struct platform_device *pdev)
+{
+ struct sc27xx_led_priv *priv = platform_get_drvdata(pdev);
+
+ mutex_destroy(&priv->lock);
+ return 0;
+}
+
+static const struct of_device_id sc27xx_led_of_match[] = {
+ { .compatible = "sprd,sc2731-bltc", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sc27xx_led_of_match);
+
+static struct platform_driver sc27xx_led_driver = {
+ .driver = {
+ .name = "sprd-bltc",
+ .of_match_table = sc27xx_led_of_match,
+ },
+ .probe = sc27xx_led_probe,
+ .remove = sc27xx_led_remove,
+};
+
+module_platform_driver(sc27xx_led_driver);
+
+MODULE_DESCRIPTION("Spreadtrum SC27xx breathing light controller driver");
+MODULE_AUTHOR("Xiaotong Lu <xiaotong.lu@spreadtrum.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/leds-wm831x-status.c b/drivers/leds/leds-wm831x-status.c
index be93b20e792a..c5798b92e4d3 100644
--- a/drivers/leds/leds-wm831x-status.c
+++ b/drivers/leds/leds-wm831x-status.c
@@ -188,24 +188,14 @@ static ssize_t wm831x_status_src_store(struct device *dev,
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
struct wm831x_status *led = to_wm831x_status(led_cdev);
- char name[20];
int i;
- size_t len;
- name[sizeof(name) - 1] = '\0';
- strncpy(name, buf, sizeof(name) - 1);
- len = strlen(name);
-
- if (len && name[len - 1] == '\n')
- name[len - 1] = '\0';
-
- for (i = 0; i < ARRAY_SIZE(led_src_texts); i++) {
- if (!strcmp(name, led_src_texts[i])) {
- mutex_lock(&led->mutex);
- led->src = i;
- mutex_unlock(&led->mutex);
- wm831x_status_set(led);
- }
+ i = sysfs_match_string(led_src_texts, buf);
+ if (i >= 0) {
+ mutex_lock(&led->mutex);
+ led->src = i;
+ mutex_unlock(&led->mutex);
+ wm831x_status_set(led);
}
return size;
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-26 13:41:11 +0300