diff options
| -rw-r--r-- | drivers/iio/adc/hx711.c | 39 |
1 files changed, 39 insertions, 0 deletions
diff --git a/drivers/iio/adc/hx711.c b/drivers/iio/adc/hx711.c index 9430b54121e0..36b59d8957fb 100644 --- a/drivers/iio/adc/hx711.c +++ b/drivers/iio/adc/hx711.c @@ -97,6 +97,14 @@ struct hx711_data { * 2x32-bit channel + 64-bit timestamp */ u32 buffer[4]; + /* + * delay after a rising edge on SCK until the data is ready DOUT + * this is dependent on the hx711 where the datasheet tells a + * maximum value of 100 ns + * but also on potential parasitic capacities on the wiring + */ + u32 data_ready_delay_ns; + u32 clock_frequency; }; static int hx711_cycle(struct hx711_data *hx711_data) @@ -110,6 +118,14 @@ static int hx711_cycle(struct hx711_data *hx711_data) */ preempt_disable(); gpiod_set_value(hx711_data->gpiod_pd_sck, 1); + + /* + * wait until DOUT is ready + * it turned out that parasitic capacities are extending the time + * until DOUT has reached it's value + */ + ndelay(hx711_data->data_ready_delay_ns); + val = gpiod_get_value(hx711_data->gpiod_dout); /* * here we are not waiting for 0.2 us as suggested by the datasheet, @@ -120,6 +136,12 @@ static int hx711_cycle(struct hx711_data *hx711_data) gpiod_set_value(hx711_data->gpiod_pd_sck, 0); preempt_enable(); + /* + * make it a square wave for addressing cases with capacitance on + * PC_SCK + */ + ndelay(hx711_data->data_ready_delay_ns); + return val; } @@ -458,6 +480,7 @@ static const struct iio_chan_spec hx711_chan_spec[] = { static int hx711_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; struct hx711_data *hx711_data; struct iio_dev *indio_dev; int ret; @@ -530,6 +553,22 @@ static int hx711_probe(struct platform_device *pdev) hx711_data->gain_set = 128; hx711_data->gain_chan_a = 128; + hx711_data->clock_frequency = 400000; + ret = of_property_read_u32(np, "clock-frequency", + &hx711_data->clock_frequency); + + /* + * datasheet says the high level of PD_SCK has a maximum duration + * of 50 microseconds + */ + if (hx711_data->clock_frequency < 20000) { + dev_warn(dev, "clock-frequency too low - assuming 400 kHz\n"); + hx711_data->clock_frequency = 400000; + } + + hx711_data->data_ready_delay_ns = + 1000000000 / hx711_data->clock_frequency; + platform_set_drvdata(pdev, indio_dev); indio_dev->name = "hx711"; |