diff options
| -rw-r--r-- | Documentation/hwmon/aht10.rst | 10 | ||||
| -rw-r--r-- | drivers/hwmon/Kconfig | 6 | ||||
| -rw-r--r-- | drivers/hwmon/aht10.c | 19 |
3 files changed, 28 insertions, 7 deletions
diff --git a/Documentation/hwmon/aht10.rst b/Documentation/hwmon/aht10.rst index 213644b4ecba..7903b6434326 100644 --- a/Documentation/hwmon/aht10.rst +++ b/Documentation/hwmon/aht10.rst @@ -20,6 +20,14 @@ Supported chips: English: http://www.aosong.com/userfiles/files/media/Data%20Sheet%20AHT20.pdf + * Aosong DHT20 + + Prefix: 'dht20' + + Addresses scanned: None + + Datasheet: https://www.digikey.co.nz/en/htmldatasheets/production/9184855/0/0/1/101020932 + Author: Johannes Cornelis Draaijer <jcdra1@gmail.com> @@ -33,7 +41,7 @@ The address of this i2c device may only be 0x38 Special Features ---------------- -AHT20 has additional CRC8 support which is sent as the last byte of the sensor +AHT20, DHT20 has additional CRC8 support which is sent as the last byte of the sensor values. Usage Notes diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index aa783be9b73d..adf957540050 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -245,12 +245,12 @@ config SENSORS_ADT7475 will be called adt7475. config SENSORS_AHT10 - tristate "Aosong AHT10, AHT20" + tristate "Aosong AHT10, AHT20, DHT20" depends on I2C select CRC8 help - If you say yes here, you get support for the Aosong AHT10 and AHT20 - temperature and humidity sensors + If you say yes here, you get support for the Aosong AHT10, AHT20 and + DHT20 temperature and humidity sensors This driver can also be built as a module. If so, the module will be called aht10. diff --git a/drivers/hwmon/aht10.c b/drivers/hwmon/aht10.c index 8b90b661c393..007befdba977 100644 --- a/drivers/hwmon/aht10.c +++ b/drivers/hwmon/aht10.c @@ -37,6 +37,8 @@ #define AHT10_CMD_MEAS 0b10101100 #define AHT10_CMD_RST 0b10111010 +#define DHT20_CMD_INIT 0x71 + /* * Flags in the answer byte/command */ @@ -48,11 +50,12 @@ #define AHT10_MAX_POLL_INTERVAL_LEN 30 -enum aht10_variant { aht10, aht20 }; +enum aht10_variant { aht10, aht20, dht20}; static const struct i2c_device_id aht10_id[] = { { "aht10", aht10 }, { "aht20", aht20 }, + { "dht20", dht20 }, { }, }; MODULE_DEVICE_TABLE(i2c, aht10_id); @@ -75,6 +78,7 @@ MODULE_DEVICE_TABLE(i2c, aht10_id); * AHT10/AHT20 * @crc8: crc8 support flag * @meas_size: measurements data size + * @init_cmd: Initialization command */ struct aht10_data { @@ -85,6 +89,7 @@ struct aht10_data { int humidity; bool crc8; unsigned int meas_size; + u8 init_cmd; }; /* @@ -94,13 +99,13 @@ struct aht10_data { */ static int aht10_init(struct aht10_data *data) { - const u8 cmd_init[] = {AHT10_CMD_INIT, AHT10_CAL_ENABLED | AHT10_MODE_CYC, + const u8 cmd_init[] = {data->init_cmd, AHT10_CAL_ENABLED | AHT10_MODE_CYC, 0x00}; int res; u8 status; struct i2c_client *client = data->client; - res = i2c_master_send(client, cmd_init, 3); + res = i2c_master_send(client, cmd_init, sizeof(cmd_init)); if (res < 0) return res; @@ -336,9 +341,17 @@ static int aht10_probe(struct i2c_client *client) data->meas_size = AHT20_MEAS_SIZE; data->crc8 = true; crc8_populate_msb(crc8_table, AHT20_CRC8_POLY); + data->init_cmd = AHT10_CMD_INIT; + break; + case dht20: + data->meas_size = AHT20_MEAS_SIZE; + data->crc8 = true; + crc8_populate_msb(crc8_table, AHT20_CRC8_POLY); + data->init_cmd = DHT20_CMD_INIT; break; default: data->meas_size = AHT10_MEAS_SIZE; + data->init_cmd = AHT10_CMD_INIT; break; } |