diff options
176 files changed, 2348 insertions, 750 deletions
diff --git a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt new file mode 100644 index 000000000000..9b23407233c0 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt @@ -0,0 +1,29 @@ +Mixel DSI PHY for i.MX8 + +The Mixel MIPI-DSI PHY IP block is e.g. found on i.MX8 platforms (along the +MIPI-DSI IP from Northwest Logic). It represents the physical layer for the +electrical signals for DSI. + +Required properties: +- compatible: Must be: + - "fsl,imx8mq-mipi-dphy" +- clocks: Must contain an entry for each entry in clock-names. +- clock-names: Must contain the following entries: + - "phy_ref": phandle and specifier referring to the DPHY ref clock +- reg: the register range of the PHY controller +- #phy-cells: number of cells in PHY, as defined in + Documentation/devicetree/bindings/phy/phy-bindings.txt + this must be <0> + +Optional properties: +- power-domains: phandle to power domain + +Example: + dphy: dphy@30a0030 { + compatible = "fsl,imx8mq-mipi-dphy"; + clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>; + clock-names = "phy_ref"; + reg = <0x30a00300 0x100>; + power-domains = <&pd_mipi0>; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt index 6ac98b3b5f57..c9f5c0caf8a9 100644 --- a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt @@ -7,6 +7,7 @@ Required properties: * "fsl,imx6sl-usbphy" for imx6sl * "fsl,vf610-usbphy" for Vybrid vf610 * "fsl,imx6sx-usbphy" for imx6sx + * "fsl,imx7ulp-usbphy" for imx7ulp "fsl,imx23-usbphy" is still a fallback for other strings - reg: Should contain registers location and length - interrupts: Should contain phy interrupt @@ -23,7 +24,7 @@ Optional properties: the 17.78mA TX reference current. Default: 100 Example: -usbphy1: usbphy@20c9000 { +usbphy1: usb-phy@20c9000 { compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; interrupts = <0 44 0x04>; diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt index daedb15f322e..9fb682e47c29 100644 --- a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt +++ b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt @@ -42,6 +42,18 @@ Required properties: - reset-names: Must include the following entries: - "padctl" +For Tegra124: +- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V. +- avdd-pll-erefe-supply: PLLE reference PLL power supply. Must supply 1.05 V. +- avdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V. +- hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 3.3 V. + +For Tegra210: +- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V. +- avdd-pll-uerefe-supply: PLLE reference PLL power supply. Must supply 1.05 V. +- dvdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V. +- hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 1.8 V. + For Tegra186: - avdd-pll-erefeut-supply: UPHY brick and reference clock as well as UTMI PHY power supply. Must supply 1.8 V. diff --git a/Documentation/devicetree/bindings/phy/phy-pxa-usb.txt b/Documentation/devicetree/bindings/phy/phy-pxa-usb.txt new file mode 100644 index 000000000000..93fc09c12954 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-pxa-usb.txt @@ -0,0 +1,18 @@ +Marvell PXA USB PHY +------------------- + +Required properties: +- compatible: one of: "marvell,mmp2-usb-phy", "marvell,pxa910-usb-phy", + "marvell,pxa168-usb-phy", +- #phy-cells: must be 0 + +Example: + usb-phy: usbphy@d4207000 { + compatible = "marvell,mmp2-usb-phy"; + reg = <0xd4207000 0x40>; + #phy-cells = <0>; + status = "okay"; + }; + +This document explains the device tree binding. For general +information about PHY subsystem refer to Documentation/phy.txt diff --git a/Documentation/devicetree/bindings/phy/qcom-pcie2-phy.txt b/Documentation/devicetree/bindings/phy/qcom-pcie2-phy.txt new file mode 100644 index 000000000000..30064253f290 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom-pcie2-phy.txt @@ -0,0 +1,42 @@ +Qualcomm PCIe2 PHY controller +============================= + +The Qualcomm PCIe2 PHY is a Synopsys based phy found in a number of Qualcomm +platforms. + +Required properties: + - compatible: compatible list, should be: + "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy" + + - reg: offset and length of the PHY register set. + - #phy-cells: must be 0. + + - clocks: a clock-specifier pair for the "pipe" clock + + - vdda-vp-supply: phandle to low voltage regulator + - vdda-vph-supply: phandle to high voltage regulator + + - resets: reset-specifier pairs for the "phy" and "pipe" resets + - reset-names: list of resets, should contain: + "phy" and "pipe" + + - clock-output-names: name of the outgoing clock signal from the PHY PLL + - #clock-cells: must be 0 + +Example: + phy@7786000 { + compatible = "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy"; + reg = <0x07786000 0xb8>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + resets = <&gcc GCC_PCIEPHY_0_PHY_BCR>, + <&gcc GCC_PCIE_0_PIPE_ARES>; + reset-names = "phy", "pipe"; + + vdda-vp-supply = <&vreg_l3_1p05>; + vdda-vph-supply = <&vreg_l5_1p8>; + + clock-output-names = "pcie_0_pipe_clk"; + #clock-cells = <0>; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt index d46188f450bf..503a8cfb3184 100644 --- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt +++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt @@ -1,10 +1,12 @@ * Renesas R-Car generation 3 USB 2.0 PHY This file provides information on what the device node for the R-Car generation -3, RZ/G1C and RZ/G2 USB 2.0 PHY contain. +3, RZ/G1C, RZ/G2 and RZ/A2 USB 2.0 PHY contain. Required properties: -- compatible: "renesas,usb2-phy-r8a77470" if the device is a part of an R8A77470 +- compatible: "renesas,usb2-phy-r7s9210" if the device is a part of an R7S9210 + SoC. + "renesas,usb2-phy-r8a77470" if the device is a part of an R8A77470 SoC. "renesas,usb2-phy-r8a774a1" if the device is a part of an R8A774A1 SoC. @@ -20,8 +22,8 @@ Required properties: R8A77990 SoC. "renesas,usb2-phy-r8a77995" if the device is a part of an R8A77995 SoC. - "renesas,rcar-gen3-usb2-phy" for a generic R-Car Gen3 or RZ/G2 - compatible device. + "renesas,rcar-gen3-usb2-phy" for a generic R-Car Gen3, RZ/G2 or + RZ/A2 compatible device. When compatible with the generic version, nodes must list the SoC-specific version corresponding to the platform first @@ -46,6 +48,9 @@ channel as USB OTG: regulator will be managed during the PHY power on/off sequence. - renesas,no-otg-pins: boolean, specify when a board does not provide proper otg pins. +- dr_mode: string, indicates the working mode for the PHY. Can be "host", + "peripheral", or "otg". Should be set if otg controller is not used. + Example (R-Car H3): diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt index 49eac0dc86b0..aafff3a6904d 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.txt +++ b/Documentation/devicetree/bindings/usb/dwc2.txt @@ -42,6 +42,8 @@ Refer to phy/phy-bindings.txt for generic phy consumer properties - g-rx-fifo-size: size of rx fifo size in gadget mode. - g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode. - g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode. +- snps,need-phy-for-wake: If present indicates that the phy needs to be left + on for remote wakeup during suspend. - snps,reset-phy-on-wake: If present indicates that we need to reset the PHY when we detect a wakeup. This is due to a hardware errata. @@ -58,4 +60,5 @@ Example: clock-names = "otg"; phys = <&usbphy>; phy-names = "usb2-phy"; + snps,need-phy-for-wake; }; diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index 8e5265e9f658..66780a47ad85 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -64,6 +64,8 @@ Optional properties: - snps,dis_u2_susphy_quirk: when set core will disable USB2 suspend phy. - snps,dis_enblslpm_quirk: when set clears the enblslpm in GUSB2PHYCFG, disabling the suspend signal to the PHY. + - snps,dis-u1-entry-quirk: set if link entering into U1 needs to be disabled. + - snps,dis-u2-entry-quirk: set if link entering into U2 needs to be disabled. - snps,dis_rxdet_inp3_quirk: when set core will disable receiver detection in PHY P3 power state. - snps,dis-u2-freeclk-exists-quirk: when set, clear the u2_freeclk_exists diff --git a/Documentation/devicetree/bindings/usb/renesas_usb3.txt b/Documentation/devicetree/bindings/usb/renesas,usb3.txt index 35039e720515..35039e720515 100644 --- a/Documentation/devicetree/bindings/usb/renesas_usb3.txt +++ b/Documentation/devicetree/bindings/usb/renesas,usb3.txt diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas,usbhs.txt index b8acc2a994a8..e39255ea6e4f 100644 --- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt +++ b/Documentation/devicetree/bindings/usb/renesas,usbhs.txt @@ -20,9 +20,11 @@ Required properties: - "renesas,usbhs-r8a77990" for r8a77990 (R-Car E3) compatible device - "renesas,usbhs-r8a77995" for r8a77995 (R-Car D3) compatible device - "renesas,usbhs-r7s72100" for r7s72100 (RZ/A1) compatible device + - "renesas,usbhs-r7s9210" for r7s9210 (RZ/A2) compatible device - "renesas,rcar-gen2-usbhs" for R-Car Gen2 or RZ/G1 compatible devices - "renesas,rcar-gen3-usbhs" for R-Car Gen3 or RZ/G2 compatible devices - "renesas,rza1-usbhs" for RZ/A1 compatible device + - "renesas,rza2-usbhs" for RZ/A2 compatible device When compatible with the generic version, nodes must list the SoC-specific version corresponding to the platform first followed diff --git a/Documentation/index.rst b/Documentation/index.rst index 781042b4579d..216dc0e1e6f2 100644 --- a/Documentation/index.rst +++ b/Documentation/index.rst @@ -101,6 +101,7 @@ needed). filesystems/index vm/index bpf/index + usb/index misc-devices/index Architecture-specific documentation diff --git a/Documentation/usb/acm.txt b/Documentation/usb/acm.rst index e8bda98e9b51..e8bda98e9b51 100644 --- a/Documentation/usb/acm.txt +++ b/Documentation/usb/acm.rst diff --git a/Documentation/usb/authorization.txt b/Documentation/usb/authorization.rst index 9e53909d04c2..9e53909d04c2 100644 --- a/Documentation/usb/authorization.txt +++ b/Documentation/usb/authorization.rst diff --git a/Documentation/usb/chipidea.txt b/Documentation/usb/chipidea.rst index 68473abe2823..68473abe2823 100644 --- a/Documentation/usb/chipidea.txt +++ b/Documentation/usb/chipidea.rst diff --git a/Documentation/usb/dwc3.txt b/Documentation/usb/dwc3.rst index f94a7ba16573..f94a7ba16573 100644 --- a/Documentation/usb/dwc3.txt +++ b/Documentation/usb/dwc3.rst diff --git a/Documentation/usb/ehci.txt b/Documentation/usb/ehci.rst index 31f650e7c1b4..31f650e7c1b4 100644 --- a/Documentation/usb/ehci.txt +++ b/Documentation/usb/ehci.rst diff --git a/Documentation/usb/functionfs.txt b/Documentation/usb/functionfs.rst index 7fdc6d840ac5..7fdc6d840ac5 100644 --- a/Documentation/usb/functionfs.txt +++ b/Documentation/usb/functionfs.rst diff --git a/Documentation/usb/gadget-testing.txt b/Documentation/usb/gadget-testing.rst index 7d7f2340af42..2eeb3e9299e4 100644 --- a/Documentation/usb/gadget-testing.txt +++ b/Documentation/usb/gadget-testing.rst @@ -254,7 +254,7 @@ Device: - connect the gadget to a host, preferably not the one used to control the gadget - run a program which writes to /dev/hidg<N>, e.g. - a userspace program found in Documentation/usb/gadget_hid.txt:: + a userspace program found in Documentation/usb/gadget_hid.rst:: $ ./hid_gadget_test /dev/hidg0 keyboard @@ -886,7 +886,7 @@ host:: # cat /dev/usb/lp0 More advanced testing can be done with the prn_example -described in Documentation/usb/gadget_printer.txt. +described in Documentation/usb/gadget_printer.rst. 20. UAC1 function (virtual ALSA card, using u_audio API) diff --git a/Documentation/usb/gadget_configfs.txt b/Documentation/usb/gadget_configfs.rst index 54fb08baae22..54fb08baae22 100644 --- a/Documentation/usb/gadget_configfs.txt +++ b/Documentation/usb/gadget_configfs.rst diff --git a/Documentation/usb/gadget_hid.txt b/Documentation/usb/gadget_hid.rst index 098d563040cc..098d563040cc 100644 --- a/Documentation/usb/gadget_hid.txt +++ b/Documentation/usb/gadget_hid.rst diff --git a/Documentation/usb/gadget_multi.txt b/Documentation/usb/gadget_multi.rst index 9806b55af301..9806b55af301 100644 --- a/Documentation/usb/gadget_multi.txt +++ b/Documentation/usb/gadget_multi.rst diff --git a/Documentation/usb/gadget_printer.txt b/Documentation/usb/gadget_printer.rst index 5e5516c69075..5e5516c69075 100644 --- a/Documentation/usb/gadget_printer.txt +++ b/Documentation/usb/gadget_printer.rst diff --git a/Documentation/usb/gadget_serial.txt b/Documentation/usb/gadget_serial.rst index dce8bc1fb1f2..dce8bc1fb1f2 100644 --- a/Documentation/usb/gadget_serial.txt +++ b/Documentation/usb/gadget_serial.rst diff --git a/Documentation/usb/index.rst b/Documentation/usb/index.rst new file mode 100644 index 000000000000..e55386a4abfb --- /dev/null +++ b/Documentation/usb/index.rst @@ -0,0 +1,39 @@ +=========== +USB support +=========== + +.. toctree:: + :maxdepth: 1 + + acm + authorization + chipidea + dwc3 + ehci + functionfs + gadget_configfs + gadget_hid + gadget_multi + gadget_printer + gadget_serial + gadget-testing + iuu_phoenix + mass-storage + misc_usbsevseg + mtouchusb + ohci + rio + usbip_protocol + usbmon + usb-serial + wusb-design-overview + + usb-help + text_files + +.. only:: subproject and html + + Indices + ======= + + * :ref:`genindex` diff --git a/Documentation/usb/iuu_phoenix.txt b/Documentation/usb/iuu_phoenix.rst index b76268728450..b76268728450 100644 --- a/Documentation/usb/iuu_phoenix.txt +++ b/Documentation/usb/iuu_phoenix.rst diff --git a/Documentation/usb/mass-storage.txt b/Documentation/usb/mass-storage.rst index d181b47c3cb6..d181b47c3cb6 100644 --- a/Documentation/usb/mass-storage.txt +++ b/Documentation/usb/mass-storage.rst diff --git a/Documentation/usb/misc_usbsevseg.txt b/Documentation/usb/misc_usbsevseg.rst index 6274aee083ed..6274aee083ed 100644 --- a/Documentation/usb/misc_usbsevseg.txt +++ b/Documentation/usb/misc_usbsevseg.rst diff --git a/Documentation/usb/mtouchusb.txt b/Documentation/usb/mtouchusb.rst index d1111b74bf75..d1111b74bf75 100644 --- a/Documentation/usb/mtouchusb.txt +++ b/Documentation/usb/mtouchusb.rst diff --git a/Documentation/usb/ohci.txt b/Documentation/usb/ohci.rst index bb3c49719e6b..bb3c49719e6b 100644 --- a/Documentation/usb/ohci.txt +++ b/Documentation/usb/ohci.rst diff --git a/Documentation/usb/rio.txt b/Documentation/usb/rio.rst index ea73475471db..ea73475471db 100644 --- a/Documentation/usb/rio.txt +++ b/Documentation/usb/rio.rst diff --git a/Documentation/usb/text_files.rst b/Documentation/usb/text_files.rst new file mode 100644 index 000000000000..6a8d3fcf64b6 --- /dev/null +++ b/Documentation/usb/text_files.rst @@ -0,0 +1,29 @@ +Linux CDC ACM inf +----------------- + +.. include:: linux-cdc-acm.inf + :literal: + +Linux inf +--------- + +.. include:: linux.inf + :literal: + +USB devfs drop permissions source +--------------------------------- + +.. literalinclude:: usbdevfs-drop-permissions.c + :language: c + +WUSB command line script to manipulate auth credentials +------------------------------------------------------- + +.. literalinclude:: wusb-cbaf + :language: shell + +Credits +------- + +.. include:: CREDITS + :literal: diff --git a/Documentation/usb/usb-help.txt b/Documentation/usb/usb-help.rst index dc23ecd4d802..dc23ecd4d802 100644 --- a/Documentation/usb/usb-help.txt +++ b/Documentation/usb/usb-help.rst diff --git a/Documentation/usb/usb-serial.txt b/Documentation/usb/usb-serial.rst index 8fa7dbd3da9a..8fa7dbd3da9a 100644 --- a/Documentation/usb/usb-serial.txt +++ b/Documentation/usb/usb-serial.rst diff --git a/Documentation/usb/usbip_protocol.txt b/Documentation/usb/usbip_protocol.rst index 988c832166cd..988c832166cd 100644 --- a/Documentation/usb/usbip_protocol.txt +++ b/Documentation/usb/usbip_protocol.rst diff --git a/Documentation/usb/usbmon.txt b/Documentation/usb/usbmon.rst index b0bd51080799..b0bd51080799 100644 --- a/Documentation/usb/usbmon.txt +++ b/Documentation/usb/usbmon.rst diff --git a/Documentation/usb/WUSB-Design-overview.txt b/Documentation/usb/wusb-design-overview.rst index dc5e21609bb5..dc5e21609bb5 100644 --- a/Documentation/usb/WUSB-Design-overview.txt +++ b/Documentation/usb/wusb-design-overview.rst diff --git a/MAINTAINERS b/MAINTAINERS index 30e91044fde8..769f19106367 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3792,7 +3792,7 @@ F: scripts/extract-cert.c CERTIFIED WIRELESS USB (WUSB) SUBSYSTEM: L: linux-usb@vger.kernel.org S: Orphan -F: Documentation/usb/WUSB-Design-overview.txt +F: Documentation/usb/wusb-design-overview.rst F: Documentation/usb/wusb-cbaf F: drivers/usb/host/hwa-hc.c F: drivers/usb/host/whci/ @@ -16422,7 +16422,7 @@ USB ACM DRIVER M: Oliver Neukum <oneukum@suse.com> L: linux-usb@vger.kernel.org S: Maintained -F: Documentation/usb/acm.txt +F: Documentation/usb/acm.rst F: drivers/usb/class/cdc-acm.* USB AR5523 WIRELESS DRIVER @@ -16475,7 +16475,7 @@ USB EHCI DRIVER M: Alan Stern <stern@rowland.harvard.edu> L: linux-usb@vger.kernel.org S: Maintained -F: Documentation/usb/ehci.txt +F: Documentation/usb/ehci.rst F: drivers/usb/host/ehci* USB GADGET/PERIPHERAL SUBSYSTEM @@ -16549,7 +16549,7 @@ USB OHCI DRIVER M: Alan Stern <stern@rowland.harvard.edu> L: linux-usb@vger.kernel.org S: Maintained -F: Documentation/usb/ohci.txt +F: Documentation/usb/ohci.rst F: drivers/usb/host/ohci* USB OTG FSM (Finite State Machine) @@ -16565,7 +16565,7 @@ M: Shuah Khan <shuah@kernel.org> M: Shuah Khan <skhan@linuxfoundation.org> L: linux-usb@vger.kernel.org S: Maintained -F: Documentation/usb/usbip_protocol.txt +F: Documentation/usb/usbip_protocol.rst F: drivers/usb/usbip/ F: tools/usb/usbip/ F: tools/testing/selftests/drivers/usb/usbip/ @@ -16613,7 +16613,7 @@ M: Johan Hovold <johan@kernel.org> L: linux-usb@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial.git S: Maintained -F: Documentation/usb/usb-serial.txt +F: Documentation/usb/usb-serial.rst F: drivers/usb/serial/ F: include/linux/usb/serial.h diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index 1252522392c7..1d8bfed7830c 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -424,6 +424,7 @@ &usb_host1 { status = "okay"; + snps,need-phy-for-wake; }; &usb_otg { @@ -432,6 +433,7 @@ assigned-clocks = <&cru SCLK_USBPHY480M_SRC>; assigned-clock-parents = <&usbphy0>; dr_mode = "host"; + snps,need-phy-for-wake; }; &vopb { diff --git a/crypto/ccm.c b/crypto/ccm.c index 8c24605c791e..380eb619f657 100644 --- a/crypto/ccm.c +++ b/crypto/ccm.c @@ -1009,3 +1009,4 @@ MODULE_DESCRIPTION("Counter with CBC MAC"); MODULE_ALIAS_CRYPTO("ccm_base"); MODULE_ALIAS_CRYPTO("rfc4309"); MODULE_ALIAS_CRYPTO("ccm"); +MODULE_ALIAS_CRYPTO("cbcmac"); diff --git a/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c b/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c index 6233a7979a93..ac322d643c7a 100644 --- a/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c +++ b/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c @@ -188,7 +188,7 @@ static const struct regmap_config phy_g12a_usb3_pcie_cr_regmap_conf = { .reg_read = phy_g12a_usb3_pcie_cr_bus_read, .reg_write = phy_g12a_usb3_pcie_cr_bus_write, .max_register = 0xffff, - .fast_io = true, + .disable_locking = true, }; static int phy_g12a_usb3_init(struct phy *phy) diff --git a/drivers/phy/broadcom/phy-brcm-usb.c b/drivers/phy/broadcom/phy-brcm-usb.c index 7a6a6dd3fced..f5c1f2983a1d 100644 --- a/drivers/phy/broadcom/phy-brcm-usb.c +++ b/drivers/phy/broadcom/phy-brcm-usb.c @@ -368,6 +368,13 @@ static int brcm_usb_phy_probe(struct platform_device *pdev) return PTR_ERR_OR_ZERO(phy_provider); } +static int brcm_usb_phy_remove(struct platform_device *pdev) +{ + sysfs_remove_group(&pdev->dev.kobj, &brcm_usb_phy_group); + + return 0; +} + #ifdef CONFIG_PM_SLEEP static int brcm_usb_phy_suspend(struct device *dev) { @@ -433,9 +440,9 @@ MODULE_DEVICE_TABLE(of, brcm_usb_dt_ids); static struct platform_driver brcm_usb_driver = { .probe = brcm_usb_phy_probe, + .remove = brcm_usb_phy_remove, .driver = { .name = "brcmstb-usb-phy", - .owner = THIS_MODULE, .pm = &brcm_usb_phy_pm_ops, .of_match_table = brcm_usb_dt_ids, }, diff --git a/drivers/phy/freescale/Kconfig b/drivers/phy/freescale/Kconfig index f435d6406943..320630ffe3cd 100644 --- a/drivers/phy/freescale/Kconfig +++ b/drivers/phy/freescale/Kconfig @@ -4,3 +4,13 @@ config PHY_FSL_IMX8MQ_USB depends on OF && HAS_IOMEM select GENERIC_PHY default ARCH_MXC && ARM64 + +config PHY_MIXEL_MIPI_DPHY + tristate "Mixel MIPI DSI PHY support" + depends on OF && HAS_IOMEM + select GENERIC_PHY + select GENERIC_PHY_MIPI_DPHY + select REGMAP_MMIO + help + Enable this to add support for the Mixel DSI PHY as found + on NXP's i.MX8 family of SOCs. diff --git a/drivers/phy/freescale/Makefile b/drivers/phy/freescale/Makefile index a459a44f6ecd..1d02e3869b45 100644 --- a/drivers/phy/freescale/Makefile +++ b/drivers/phy/freescale/Makefile @@ -1,2 +1,3 @@ # SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_PHY_FSL_IMX8MQ_USB) += phy-fsl-imx8mq-usb.o +obj-$(CONFIG_PHY_MIXEL_MIPI_DPHY) += phy-fsl-imx8-mipi-dphy.o diff --git a/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c b/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c new file mode 100644 index 000000000000..9f2c1da14f5a --- /dev/null +++ b/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c @@ -0,0 +1,497 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2017,2018 NXP + * Copyright 2019 Purism SPC + */ + +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +/* DPHY registers */ +#define DPHY_PD_DPHY 0x00 +#define DPHY_M_PRG_HS_PREPARE 0x04 +#define DPHY_MC_PRG_HS_PREPARE 0x08 +#define DPHY_M_PRG_HS_ZERO 0x0c +#define DPHY_MC_PRG_HS_ZERO 0x10 +#define DPHY_M_PRG_HS_TRAIL 0x14 +#define DPHY_MC_PRG_HS_TRAIL 0x18 +#define DPHY_PD_PLL 0x1c +#define DPHY_TST 0x20 +#define DPHY_CN 0x24 +#define DPHY_CM 0x28 +#define DPHY_CO 0x2c +#define DPHY_LOCK 0x30 +#define DPHY_LOCK_BYP 0x34 +#define DPHY_REG_BYPASS_PLL 0x4C + +#define MBPS(x) ((x) * 1000000) + +#define DATA_RATE_MAX_SPEED MBPS(1500) +#define DATA_RATE_MIN_SPEED MBPS(80) + +#define PLL_LOCK_SLEEP 10 +#define PLL_LOCK_TIMEOUT 1000 + +#define CN_BUF 0xcb7a89c0 +#define CO_BUF 0x63 +#define CM(x) ( \ + ((x) < 32) ? 0xe0 | ((x) - 16) : \ + ((x) < 64) ? 0xc0 | ((x) - 32) : \ + ((x) < 128) ? 0x80 | ((x) - 64) : \ + ((x) - 128)) +#define CN(x) (((x) == 1) ? 0x1f : (((CN_BUF) >> ((x) - 1)) & 0x1f)) +#define CO(x) ((CO_BUF) >> (8 - (x)) & 0x03) + +/* PHY power on is active low */ +#define PWR_ON 0 +#define PWR_OFF 1 + +enum mixel_dphy_devtype { + MIXEL_IMX8MQ, +}; + +struct mixel_dphy_devdata { + u8 reg_tx_rcal; + u8 reg_auto_pd_en; + u8 reg_rxlprp; + u8 reg_rxcdrp; + u8 reg_rxhs_settle; +}; + +static const struct mixel_dphy_devdata mixel_dphy_devdata[] = { + [MIXEL_IMX8MQ] = { + .reg_tx_rcal = 0x38, + .reg_auto_pd_en = 0x3c, + .reg_rxlprp = 0x40, + .reg_rxcdrp = 0x44, + .reg_rxhs_settle = 0x48, + }, +}; + +struct mixel_dphy_cfg { + /* DPHY PLL parameters */ + u32 cm; + u32 cn; + u32 co; + /* DPHY register values */ + u8 mc_prg_hs_prepare; + u8 m_prg_hs_prepare; + u8 mc_prg_hs_zero; + u8 m_prg_hs_zero; + u8 mc_prg_hs_trail; + u8 m_prg_hs_trail; + u8 rxhs_settle; +}; + +struct mixel_dphy_priv { + struct mixel_dphy_cfg cfg; + struct regmap *regmap; + struct clk *phy_ref_clk; + const struct mixel_dphy_devdata *devdata; +}; + +static const struct regmap_config mixel_dphy_regmap_config = { + .reg_bits = 8, + .val_bits = 32, + .reg_stride = 4, + .max_register = DPHY_REG_BYPASS_PLL, + .name = "mipi-dphy", +}; + +static int phy_write(struct phy *phy, u32 value, unsigned int reg) +{ + struct mixel_dphy_priv *priv = phy_get_drvdata(phy); + int ret; + + ret = regmap_write(priv->regmap, reg, value); + if (ret < 0) + dev_err(&phy->dev, "Failed to write DPHY reg %d: %d\n", reg, + ret); + return ret; +} + +/* + * Find a ratio close to the desired one using continued fraction + * approximation ending either at exact match or maximum allowed + * nominator, denominator. + */ +static void get_best_ratio(u32 *pnum, u32 *pdenom, u32 max_n, u32 max_d) +{ + u32 a = *pnum; + u32 b = *pdenom; + u32 c; + u32 n[] = {0, 1}; + u32 d[] = {1, 0}; + u32 whole; + unsigned int i = 1; + + while (b) { + i ^= 1; + whole = a / b; + n[i] += (n[i ^ 1] * whole); + d[i] += (d[i ^ 1] * whole); + if ((n[i] > max_n) || (d[i] > max_d)) { + i ^= 1; + break; + } + c = a - (b * whole); + a = b; + b = c; + } + *pnum = n[i]; + *pdenom = d[i]; +} + +static int mixel_dphy_config_from_opts(struct phy *phy, + struct phy_configure_opts_mipi_dphy *dphy_opts, + struct mixel_dphy_cfg *cfg) +{ + struct mixel_dphy_priv *priv = dev_get_drvdata(phy->dev.parent); + unsigned long ref_clk = clk_get_rate(priv->phy_ref_clk); + u32 lp_t, numerator, denominator; + unsigned long long tmp; + u32 n; + int i; + + if (dphy_opts->hs_clk_rate > DATA_RATE_MAX_SPEED || + dphy_opts->hs_clk_rate < DATA_RATE_MIN_SPEED) + return -EINVAL; + + numerator = dphy_opts->hs_clk_rate; + denominator = ref_clk; + get_best_ratio(&numerator, &denominator, 255, 256); + if (!numerator || !denominator) { + dev_err(&phy->dev, "Invalid %d/%d for %ld/%ld\n", + numerator, denominator, + dphy_opts->hs_clk_rate, ref_clk); + return -EINVAL; + } + + while ((numerator < 16) && (denominator <= 128)) { + numerator <<= 1; + denominator <<= 1; + } + /* + * CM ranges between 16 and 255 + * CN ranges between 1 and 32 + * CO is power of 2: 1, 2, 4, 8 + */ + i = __ffs(denominator); + if (i > 3) + i = 3; + cfg->cn = denominator >> i; + cfg->co = 1 << i; + cfg->cm = numerator; + + if (cfg->cm < 16 || cfg->cm > 255 || + cfg->cn < 1 || cfg->cn > 32 || + cfg->co < 1 || cfg->co > 8) { + dev_err(&phy->dev, "Invalid CM/CN/CO values: %u/%u/%u\n", + cfg->cm, cfg->cn, cfg->co); + dev_err(&phy->dev, "for hs_clk/ref_clk=%ld/%ld ~ %d/%d\n", + dphy_opts->hs_clk_rate, ref_clk, + numerator, denominator); + return -EINVAL; + } + + dev_dbg(&phy->dev, "hs_clk/ref_clk=%ld/%ld ~ %d/%d\n", + dphy_opts->hs_clk_rate, ref_clk, numerator, denominator); + + /* LP clock period */ + tmp = 1000000000000LL; + do_div(tmp, dphy_opts->lp_clk_rate); /* ps */ + if (tmp > ULONG_MAX) + return -EINVAL; + + lp_t = tmp; + dev_dbg(&phy->dev, "LP clock %lu, period: %u ps\n", + dphy_opts->lp_clk_rate, lp_t); + + /* hs_prepare: in lp clock periods */ + if (2 * dphy_opts->hs_prepare > 5 * lp_t) { + dev_err(&phy->dev, + "hs_prepare (%u) > 2.5 * lp clock period (%u)\n", + dphy_opts->hs_prepare, lp_t); + return -EINVAL; + } + /* 00: lp_t, 01: 1.5 * lp_t, 10: 2 * lp_t, 11: 2.5 * lp_t */ + if (dphy_opts->hs_prepare < lp_t) { + n = 0; + } else { + tmp = 2 * (dphy_opts->hs_prepare - lp_t); + do_div(tmp, lp_t); + n = tmp; + } + cfg->m_prg_hs_prepare = n; + + /* clk_prepare: in lp clock periods */ + if (2 * dphy_opts->clk_prepare > 3 * lp_t) { + dev_err(&phy->dev, + "clk_prepare (%u) > 1.5 * lp clock period (%u)\n", + dphy_opts->clk_prepare, lp_t); + return -EINVAL; + } + /* 00: lp_t, 01: 1.5 * lp_t */ + cfg->mc_prg_hs_prepare = dphy_opts->clk_prepare > lp_t ? 1 : 0; + + /* hs_zero: formula from NXP BSP */ + n = (144 * (dphy_opts->hs_clk_rate / 1000000) - 47500) / 10000; + cfg->m_prg_hs_zero = n < 1 ? 1 : n; + + /* clk_zero: formula from NXP BSP */ + n = (34 * (dphy_opts->hs_clk_rate / 1000000) - 2500) / 1000; + cfg->mc_prg_hs_zero = n < 1 ? 1 : n; + + /* clk_trail, hs_trail: formula from NXP BSP */ + n = (103 * (dphy_opts->hs_clk_rate / 1000000) + 10000) / 10000; + if (n > 15) + n = 15; + if (n < 1) + n = 1; + cfg->m_prg_hs_trail = n; + cfg->mc_prg_hs_trail = n; + + /* rxhs_settle: formula from NXP BSP */ + if (dphy_opts->hs_clk_rate < MBPS(80)) + cfg->rxhs_settle = 0x0d; + else if (dphy_opts->hs_clk_rate < MBPS(90)) + cfg->rxhs_settle = 0x0c; + else if (dphy_opts->hs_clk_rate < MBPS(125)) + cfg->rxhs_settle = 0x0b; + else if (dphy_opts->hs_clk_rate < MBPS(150)) + cfg->rxhs_settle = 0x0a; + else if (dphy_opts->hs_clk_rate < MBPS(225)) + cfg->rxhs_settle = 0x09; + else if (dphy_opts->hs_clk_rate < MBPS(500)) + cfg->rxhs_settle = 0x08; + else + cfg->rxhs_settle = 0x07; + + dev_dbg(&phy->dev, "phy_config: %u %u %u %u %u %u %u\n", + cfg->m_prg_hs_prepare, cfg->mc_prg_hs_prepare, + cfg->m_prg_hs_zero, cfg->mc_prg_hs_zero, + cfg->m_prg_hs_trail, cfg->mc_prg_hs_trail, + cfg->rxhs_settle); + + return 0; +} + +static void mixel_phy_set_hs_timings(struct phy *phy) +{ + struct mixel_dphy_priv *priv = phy_get_drvdata(phy); + + phy_write(phy, priv->cfg.m_prg_hs_prepare, DPHY_M_PRG_HS_PREPARE); + phy_write(phy, priv->cfg.mc_prg_hs_prepare, DPHY_MC_PRG_HS_PREPARE); + phy_write(phy, priv->cfg.m_prg_hs_zero, DPHY_M_PRG_HS_ZERO); + phy_write(phy, priv->cfg.mc_prg_hs_zero, DPHY_MC_PRG_HS_ZERO); + phy_write(phy, priv->cfg.m_prg_hs_trail, DPHY_M_PRG_HS_TRAIL); + phy_write(phy, priv->cfg.mc_prg_hs_trail, DPHY_MC_PRG_HS_TRAIL); + phy_write(phy, priv->cfg.rxhs_settle, priv->devdata->reg_rxhs_settle); +} + +static int mixel_dphy_set_pll_params(struct phy *phy) +{ + struct mixel_dphy_priv *priv = dev_get_drvdata(phy->dev.parent); + + if (priv->cfg.cm < 16 || priv->cfg.cm > 255 || + priv->cfg.cn < 1 || priv->cfg.cn > 32 || + priv->cfg.co < 1 || priv->cfg.co > 8) { + dev_err(&phy->dev, "Invalid CM/CN/CO values! (%u/%u/%u)\n", + priv->cfg.cm, priv->cfg.cn, priv->cfg.co); + return -EINVAL; + } + dev_dbg(&phy->dev, "Using CM:%u CN:%u CO:%u\n", + priv->cfg.cm, priv->cfg.cn, priv->cfg.co); + phy_write(phy, CM(priv->cfg.cm), DPHY_CM); + phy_write(phy, CN(priv->cfg.cn), DPHY_CN); + phy_write(phy, CO(priv->cfg.co), DPHY_CO); + return 0; +} + +static int mixel_dphy_configure(struct phy *phy, union phy_configure_opts *opts) +{ + struct mixel_dphy_priv *priv = phy_get_drvdata(phy); + struct mixel_dphy_cfg cfg = { 0 }; + int ret; + + ret = mixel_dphy_config_from_opts(phy, &opts->mipi_dphy, &cfg); + if (ret) + return ret; + + /* Update the configuration */ + memcpy(&priv->cfg, &cfg, sizeof(struct mixel_dphy_cfg)); + + phy_write(phy, 0x00, DPHY_LOCK_BYP); + phy_write(phy, 0x01, priv->devdata->reg_tx_rcal); + phy_write(phy, 0x00, priv->devdata->reg_auto_pd_en); + phy_write(phy, 0x02, priv->devdata->reg_rxlprp); + phy_write(phy, 0x02, priv->devdata->reg_rxcdrp); + phy_write(phy, 0x25, DPHY_TST); + + mixel_phy_set_hs_timings(phy); + ret = mixel_dphy_set_pll_params(phy); + if (ret < 0) + return ret; + + return 0; +} + +static int mixel_dphy_validate(struct phy *phy, enum phy_mode mode, int submode, + union phy_configure_opts *opts) +{ + struct mixel_dphy_cfg cfg = { 0 }; + + if (mode != PHY_MODE_MIPI_DPHY) + return -EINVAL; + + return mixel_dphy_config_from_opts(phy, &opts->mipi_dphy, &cfg); +} + +static int mixel_dphy_init(struct phy *phy) +{ + phy_write(phy, PWR_OFF, DPHY_PD_PLL); + phy_write(phy, PWR_OFF, DPHY_PD_DPHY); + + return 0; +} + +static int mixel_dphy_exit(struct phy *phy) +{ + phy_write(phy, 0, DPHY_CM); + phy_write(phy, 0, DPHY_CN); + phy_write(phy, 0, DPHY_CO); + + return 0; +} + +static int mixel_dphy_power_on(struct phy *phy) +{ + struct mixel_dphy_priv *priv = phy_get_drvdata(phy); + u32 locked; + int ret; + + ret = clk_prepare_enable(priv->phy_ref_clk); + if (ret < 0) + return ret; + + phy_write(phy, PWR_ON, DPHY_PD_PLL); + ret = regmap_read_poll_timeout(priv->regmap, DPHY_LOCK, locked, + locked, PLL_LOCK_SLEEP, + PLL_LOCK_TIMEOUT); + if (ret < 0) { + dev_err(&phy->dev, "Could not get DPHY lock (%d)!\n", ret); + goto clock_disable; + } + phy_write(phy, PWR_ON, DPHY_PD_DPHY); + + return 0; +clock_disable: + clk_disable_unprepare(priv->phy_ref_clk); + return ret; +} + +static int mixel_dphy_power_off(struct phy *phy) +{ + struct mixel_dphy_priv *priv = phy_get_drvdata(phy); + + phy_write(phy, PWR_OFF, DPHY_PD_PLL); + phy_write(phy, PWR_OFF, DPHY_PD_DPHY); + + clk_disable_unprepare(priv->phy_ref_clk); + + return 0; +} + +static const struct phy_ops mixel_dphy_phy_ops = { + .init = mixel_dphy_init, + .exit = mixel_dphy_exit, + .power_on = mixel_dphy_power_on, + .power_off = mixel_dphy_power_off, + .configure = mixel_dphy_configure, + .validate = mixel_dphy_validate, + .owner = THIS_MODULE, +}; + +static const struct of_device_id mixel_dphy_of_match[] = { + { .compatible = "fsl,imx8mq-mipi-dphy", + .data = &mixel_dphy_devdata[MIXEL_IMX8MQ] }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, mixel_dphy_of_match); + +static int mixel_dphy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct phy_provider *phy_provider; + struct mixel_dphy_priv *priv; + struct resource *res; + struct phy *phy; + void __iomem *base; + + if (!np) + return -ENODEV; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->devdata = of_device_get_match_data(&pdev->dev); + if (!priv->devdata) + return -EINVAL; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + priv->regmap = devm_regmap_init_mmio(&pdev->dev, base, + &mixel_dphy_regmap_config); + if (IS_ERR(priv->regmap)) { + dev_err(dev, "Couldn't create the DPHY regmap\n"); + return PTR_ERR(priv->regmap); + } + + priv->phy_ref_clk = devm_clk_get(&pdev->dev, "phy_ref"); + if (IS_ERR(priv->phy_ref_clk)) { + dev_err(dev, "No phy_ref clock found\n"); + return PTR_ERR(priv->phy_ref_clk); + } + dev_dbg(dev, "phy_ref clock rate: %lu\n", + clk_get_rate(priv->phy_ref_clk)); + + dev_set_drvdata(dev, priv); + + phy = devm_phy_create(dev, np, &mixel_dphy_phy_ops); + if (IS_ERR(phy)) { + dev_err(dev, "Failed to create phy %ld\n", PTR_ERR(phy)); + return PTR_ERR(phy); + } + phy_set_drvdata(phy, priv); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static struct platform_driver mixel_dphy_driver = { + .probe = mixel_dphy_probe, + .driver = { + .name = "mixel-mipi-dphy", + .of_match_table = mixel_dphy_of_match, + } +}; +module_platform_driver(mixel_dphy_driver); + +MODULE_AUTHOR("NXP Semiconductor"); +MODULE_DESCRIPTION("Mixel MIPI-DSI PHY driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig index eb49864a6bad..e46824da29f6 100644 --- a/drivers/phy/qualcomm/Kconfig +++ b/drivers/phy/qualcomm/Kconfig @@ -25,6 +25,14 @@ config PHY_QCOM_IPQ806X_SATA depends on OF select GENERIC_PHY +config PHY_QCOM_PCIE2 + tristate "Qualcomm PCIe Gen2 PHY Driver" + depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST) + select GENERIC_PHY + help + Enable this to support the Qualcomm PCIe PHY, used with the Synopsys + based PCIe controller. + config PHY_QCOM_QMP tristate "Qualcomm QMP PHY Driver" depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST) diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile index c56efd3af205..283251d6a5d9 100644 --- a/drivers/phy/qualcomm/Makefile +++ b/drivers/phy/qualcomm/Makefile @@ -2,6 +2,7 @@ obj-$(CONFIG_PHY_ATH79_USB) += phy-ath79-usb.o obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o +obj-$(CONFIG_PHY_QCOM_PCIE2) += phy-qcom-pcie2.o obj-$(CONFIG_PHY_QCOM_QMP) += phy-qcom-qmp.o obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o diff --git a/drivers/phy/qualcomm/phy-qcom-pcie2.c b/drivers/phy/qualcomm/phy-qcom-pcie2.c new file mode 100644 index 000000000000..9dba3594e6d9 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-pcie2.c @@ -0,0 +1,331 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2014-2017, The Linux Foundation. All rights reserved. + * Copyright (c) 2019, Linaro Ltd. + */ + +#include <linux/clk-provider.h> +#include <linux/clk.h> +#include <linux/iopoll.h> +#include <linux/module.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/reset.h> +#include <linux/slab.h> + +#include <dt-bindings/phy/phy.h> + +#define PCIE20_PARF_PHY_STTS 0x3c +#define PCIE2_PHY_RESET_CTRL 0x44 +#define PCIE20_PARF_PHY_REFCLK_CTRL2 0xa0 +#define PCIE20_PARF_PHY_REFCLK_CTRL3 0xa4 +#define PCIE20_PARF_PCS_SWING_CTRL1 0x88 +#define PCIE20_PARF_PCS_SWING_CTRL2 0x8c +#define PCIE20_PARF_PCS_DEEMPH1 0x74 +#define PCIE20_PARF_PCS_DEEMPH2 0x78 +#define PCIE20_PARF_PCS_DEEMPH3 0x7c +#define PCIE20_PARF_CONFIGBITS 0x84 +#define PCIE20_PARF_PHY_CTRL3 0x94 +#define PCIE20_PARF_PCS_CTRL 0x80 + +#define TX_AMP_VAL 120 +#define PHY_RX0_EQ_GEN1_VAL 0 +#define PHY_RX0_EQ_GEN2_VAL 4 +#define TX_DEEMPH_GEN1_VAL 24 +#define TX_DEEMPH_GEN2_3_5DB_VAL 26 +#define TX_DEEMPH_GEN2_6DB_VAL 36 +#define PHY_TX0_TERM_OFFST_VAL 0 + +struct qcom_phy { + struct device *dev; + void __iomem *base; + + struct regulator_bulk_data vregs[2]; + + struct reset_control *phy_reset; + struct reset_control *pipe_reset; + struct clk *pipe_clk; +}; + +static int qcom_pcie2_phy_init(struct phy *phy) +{ + struct qcom_phy *qphy = phy_get_drvdata(phy); + int ret; + + ret = reset_control_deassert(qphy->phy_reset); + if (ret) { + dev_err(qphy->dev, "cannot deassert pipe reset\n"); + return ret; + } + + ret = regulator_bulk_enable(ARRAY_SIZE(qphy->vregs), qphy->vregs); + if (ret) + reset_control_assert(qphy->phy_reset); + + return ret; +} + +static int qcom_pcie2_phy_power_on(struct phy *phy) +{ + struct qcom_phy *qphy = phy_get_drvdata(phy); + int ret; + u32 val; + + /* Program REF_CLK source */ + val = readl(qphy->base + PCIE20_PARF_PHY_REFCLK_CTRL2); + val &= ~BIT(1); + writel(val, qphy->base + PCIE20_PARF_PHY_REFCLK_CTRL2); + + usleep_range(1000, 2000); + + /* Don't use PAD for refclock */ + val = readl(qphy->base + PCIE20_PARF_PHY_REFCLK_CTRL2); + val &= ~BIT(0); + writel(val, qphy->base + PCIE20_PARF_PHY_REFCLK_CTRL2); + + /* Program SSP ENABLE */ + val = readl(qphy->base + PCIE20_PARF_PHY_REFCLK_CTRL3); + val |= BIT(0); + writel(val, qphy->base + PCIE20_PARF_PHY_REFCLK_CTRL3); + + usleep_range(1000, 2000); + + /* Assert Phy SW Reset */ + val = readl(qphy->base + PCIE2_PHY_RESET_CTRL); + val |= BIT(0); + writel(val, qphy->base + PCIE2_PHY_RESET_CTRL); + + /* Program Tx Amplitude */ + val = readl(qphy->base + PCIE20_PARF_PCS_SWING_CTRL1); + val &= ~0x7f; + val |= TX_AMP_VAL; + writel(val, qphy->base + PCIE20_PARF_PCS_SWING_CTRL1); + + val = readl(qphy->base + PCIE20_PARF_PCS_SWING_CTRL2); + val &= ~0x7f; + val |= TX_AMP_VAL; + writel(val, qphy->base + PCIE20_PARF_PCS_SWING_CTRL2); + + /* Program De-Emphasis */ + val = readl(qphy->base + PCIE20_PARF_PCS_DEEMPH1); + val &= ~0x3f; + val |= TX_DEEMPH_GEN2_6DB_VAL; + writel(val, qphy->base + PCIE20_PARF_PCS_DEEMPH1); + + val = readl(qphy->base + PCIE20_PARF_PCS_DEEMPH2); + val &= ~0x3f; + val |= TX_DEEMPH_GEN2_3_5DB_VAL; + writel(val, qphy->base + PCIE20_PARF_PCS_DEEMPH2); + + val = readl(qphy->base + PCIE20_PARF_PCS_DEEMPH3); + val &= ~0x3f; + val |= TX_DEEMPH_GEN1_VAL; + writel(val, qphy->base + PCIE20_PARF_PCS_DEEMPH3); + + /* Program Rx_Eq */ + val = readl(qphy->base + PCIE20_PARF_CONFIGBITS); + val &= ~0x7; + val |= PHY_RX0_EQ_GEN2_VAL; + writel(val, qphy->base + PCIE20_PARF_CONFIGBITS); + + /* Program Tx0_term_offset */ + val = readl(qphy->base + PCIE20_PARF_PHY_CTRL3); + val &= ~0x1f; + val |= PHY_TX0_TERM_OFFST_VAL; + writel(val, qphy->base + PCIE20_PARF_PHY_CTRL3); + + /* disable Tx2Rx Loopback */ + val = readl(qphy->base + PCIE20_PARF_PCS_CTRL); + val &= ~BIT(1); + writel(val, qphy->base + PCIE20_PARF_PCS_CTRL); + + /* De-assert Phy SW Reset */ + val = readl(qphy->base + PCIE2_PHY_RESET_CTRL); + val &= ~BIT(0); + writel(val, qphy->base + PCIE2_PHY_RESET_CTRL); + + usleep_range(1000, 2000); + + ret = reset_control_deassert(qphy->pipe_reset); + if (ret) { + dev_err(qphy->dev, "cannot deassert pipe reset\n"); + goto out; + } + + clk_set_rate(qphy->pipe_clk, 250000000); + + ret = clk_prepare_enable(qphy->pipe_clk); + if (ret) { + dev_err(qphy->dev, "failed to enable pipe clock\n"); + goto out; + } + + ret = readl_poll_timeout(qphy->base + PCIE20_PARF_PHY_STTS, val, + !(val & BIT(0)), 1000, 10); + if (ret) + dev_err(qphy->dev, "phy initialization failed\n"); + +out: + return ret; +} + +static int qcom_pcie2_phy_power_off(struct phy *phy) +{ + struct qcom_phy *qphy = phy_get_drvdata(phy); + u32 val; + + val = readl(qphy->base + PCIE2_PHY_RESET_CTRL); + val |= BIT(0); + writel(val, qphy->base + PCIE2_PHY_RESET_CTRL); + + clk_disable_unprepare(qphy->pipe_clk); + reset_control_assert(qphy->pipe_reset); + + return 0; +} + +static int qcom_pcie2_phy_exit(struct phy *phy) +{ + struct qcom_phy *qphy = phy_get_drvdata(phy); + + regulator_bulk_disable(ARRAY_SIZE(qphy->vregs), qphy->vregs); + reset_control_assert(qphy->phy_reset); + + return 0; +} + +static const struct phy_ops qcom_pcie2_ops = { + .init = qcom_pcie2_phy_init, + .power_on = qcom_pcie2_phy_power_on, + .power_off = qcom_pcie2_phy_power_off, + .exit = qcom_pcie2_phy_exit, + .owner = THIS_MODULE, +}; + +/* + * Register a fixed rate pipe clock. + * + * The <s>_pipe_clksrc generated by PHY goes to the GCC that gate + * controls it. The <s>_pipe_clk coming out of the GCC is requested + * by the PHY driver for its operations. + * We register the <s>_pipe_clksrc here. The gcc driver takes care + * of assigning this <s>_pipe_clksrc as parent to <s>_pipe_clk. + * Below picture shows this relationship. + * + * +---------------+ + * | PHY block |<<---------------------------------------+ + * | | | + * | +-------+ | +-----+ | + * I/P---^-->| PLL |---^--->pipe_clksrc--->| GCC |--->pipe_clk---+ + * clk | +-------+ | +-----+ + * +---------------+ + */ +static int phy_pipe_clksrc_register(struct qcom_phy *qphy) +{ + struct device_node *np = qphy->dev->of_node; + struct clk_fixed_rate *fixed; + struct clk_init_data init = { }; + int ret; + + ret = of_property_read_string(np, "clock-output-names", &init.name); + if (ret) { + dev_err(qphy->dev, "%s: No clock-output-names\n", np->name); + return ret; + } + + fixed = devm_kzalloc(qphy->dev, sizeof(*fixed), GFP_KERNEL); + if (!fixed) + return -ENOMEM; + + init.ops = &clk_fixed_rate_ops; + + /* controllers using QMP phys use 250MHz pipe clock interface */ + fixed->fixed_rate = 250000000; + fixed->hw.init = &init; + + return devm_clk_hw_register(qphy->dev, &fixed->hw); +} + +static int qcom_pcie2_phy_probe(struct platform_device *pdev) +{ + struct phy_provider *phy_provider; + struct qcom_phy *qphy; + struct resource *res; + struct device *dev = &pdev->dev; + struct phy *phy; + int ret; + + qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL); + if (!qphy) + return -ENOMEM; + + qphy->dev = dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + qphy->base = devm_ioremap_resource(dev, res); + if (IS_ERR(qphy->base)) + return PTR_ERR(qphy->base); + + ret = phy_pipe_clksrc_register(qphy); + if (ret) { + dev_err(dev, "failed to register pipe_clk\n"); + return ret; + } + + qphy->vregs[0].supply = "vdda-vp"; + qphy->vregs[1].supply = "vdda-vph"; + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(qphy->vregs), qphy->vregs); + if (ret < 0) + return ret; + + qphy->pipe_clk = devm_clk_get(dev, NULL); + if (IS_ERR(qphy->pipe_clk)) { + dev_err(dev, "failed to acquire pipe clock\n"); + return PTR_ERR(qphy->pipe_clk); + } + + qphy->phy_reset = devm_reset_control_get_exclusive(dev, "phy"); + if (IS_ERR(qphy->phy_reset)) { + dev_err(dev, "failed to acquire phy reset\n"); + return PTR_ERR(qphy->phy_reset); + } + + qphy->pipe_reset = devm_reset_control_get_exclusive(dev, "pipe"); + if (IS_ERR(qphy->pipe_reset)) { + dev_err(dev, "failed to acquire pipe reset\n"); + return PTR_ERR(qphy->pipe_reset); + } + + phy = devm_phy_create(dev, dev->of_node, &qcom_pcie2_ops); + if (IS_ERR(phy)) { + dev_err(dev, "failed to create phy\n"); + return PTR_ERR(phy); + } + + phy_set_drvdata(phy, qphy); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(phy_provider)) + dev_err(dev, "failed to register phy provider\n"); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id qcom_pcie2_phy_match_table[] = { + { .compatible = "qcom,pcie2-phy" }, + {} +}; +MODULE_DEVICE_TABLE(of, qcom_pcie2_phy_match_table); + +static struct platform_driver qcom_pcie2_phy_driver = { + .probe = qcom_pcie2_phy_probe, + .driver = { + .name = "phy-qcom-pcie2", + .of_match_table = qcom_pcie2_phy_match_table, + }, +}; + +module_platform_driver(qcom_pcie2_phy_driver); + +MODULE_DESCRIPTION("Qualcomm PCIe PHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c index cd91b4179b10..34ff6434da8f 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c @@ -1074,6 +1074,7 @@ static const struct qmp_phy_cfg msm8996_pciephy_cfg = { .start_ctrl = PCS_START | PLL_READY_GATE_EN, .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL, + .mask_pcs_ready = PHYSTATUS, .mask_com_pcs_ready = PCS_READY, .has_phy_com_ctrl = true, @@ -1253,7 +1254,7 @@ static const struct qmp_phy_cfg msm8998_pciephy_cfg = { .start_ctrl = SERDES_START | PCS_START, .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL, - .mask_com_pcs_ready = PCS_READY, + .mask_pcs_ready = PHYSTATUS, }; static const struct qmp_phy_cfg msm8998_usb3phy_cfg = { @@ -1547,7 +1548,7 @@ static int qcom_qmp_phy_enable(struct phy *phy) status = pcs + cfg->regs[QPHY_PCS_READY_STATUS]; mask = cfg->mask_pcs_ready; - ret = readl_poll_timeout(status, val, !(val & mask), 1, + ret = readl_poll_timeout(status, val, val & mask, 10, PHY_INIT_COMPLETE_TIMEOUT); if (ret) { dev_err(qmp->dev, "phy initialization timed-out\n"); diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c index 1cbf1d6f28ce..bf94a52d3087 100644 --- a/drivers/phy/qualcomm/phy-qcom-qusb2.c +++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c @@ -564,7 +564,7 @@ static int __maybe_unused qusb2_phy_runtime_resume(struct device *dev) } if (!qphy->has_se_clk_scheme) { - clk_prepare_enable(qphy->ref_clk); + ret = clk_prepare_enable(qphy->ref_clk); if (ret) { dev_err(dev, "failed to enable ref clk, %d\n", ret); goto disable_ahb_clk; diff --git a/drivers/phy/renesas/phy-rcar-gen2.c b/drivers/phy/renesas/phy-rcar-gen2.c index 8dc5710d9c98..2926e4937301 100644 --- a/drivers/phy/renesas/phy-rcar-gen2.c +++ b/drivers/phy/renesas/phy-rcar-gen2.c @@ -391,6 +391,7 @@ static int rcar_gen2_phy_probe(struct platform_device *pdev) error = of_property_read_u32(np, "reg", &channel_num); if (error || channel_num > 2) { dev_err(dev, "Invalid \"reg\" property\n"); + of_node_put(np); return error; } channel->select_mask = select_mask[channel_num]; @@ -406,6 +407,7 @@ static int rcar_gen2_phy_probe(struct platform_device *pdev) data->gen2_phy_ops); if (IS_ERR(phy->phy)) { dev_err(dev, "Failed to create PHY\n"); + of_node_put(np); return PTR_ERR(phy->phy); } phy_set_drvdata(phy->phy, phy); diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c index 1322185a00a2..8ffba67568ec 100644 --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c @@ -13,6 +13,7 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/module.h> +#include <linux/mutex.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_device.h> @@ -106,6 +107,7 @@ struct rcar_gen3_chan { struct rcar_gen3_phy rphys[NUM_OF_PHYS]; struct regulator *vbus; struct work_struct work; + struct mutex lock; /* protects rphys[...].powered */ enum usb_dr_mode dr_mode; bool extcon_host; bool is_otg_channel; @@ -437,15 +439,16 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p) struct rcar_gen3_chan *channel = rphy->ch; void __iomem *usb2_base = channel->base; u32 val; - int ret; + int ret = 0; + mutex_lock(&channel->lock); if (!rcar_gen3_are_all_rphys_power_off(channel)) - return 0; + goto out; if (channel->vbus) { ret = regulator_enable(channel->vbus); if (ret) - return ret; + goto out; } val = readl(usb2_base + USB2_USBCTR); @@ -454,7 +457,10 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p) val &= ~USB2_USBCTR_PLL_RST; writel(val, usb2_base + USB2_USBCTR); +out: + /* The powered flag should be set for any other phys anyway */ rphy->powered = true; + mutex_unlock(&channel->lock); return 0; } @@ -465,14 +471,18 @@ static int rcar_gen3_phy_usb2_power_off(struct phy *p) struct rcar_gen3_chan *channel = rphy->ch; int ret = 0; + mutex_lock(&channel->lock); rphy->powered = false; if (!rcar_gen3_are_all_rphys_power_off(channel)) - return 0; + goto out; if (channel->vbus) ret = regulator_disable(channel->vbus); +out: + mutex_unlock(&channel->lock); + return ret; } @@ -639,6 +649,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev) if (!phy_usb2_ops) return -EINVAL; + mutex_init(&channel->lock); for (i = 0; i < NUM_OF_PHYS; i++) { channel->rphys[i].phy = devm_phy_create(dev, NULL, phy_usb2_ops); diff --git a/drivers/phy/samsung/phy-samsung-usb2.c b/drivers/phy/samsung/phy-samsung-usb2.c index e51d45eeda60..6c82f4fbe8a2 100644 --- a/drivers/phy/samsung/phy-samsung-usb2.c +++ b/drivers/phy/samsung/phy-samsung-usb2.c @@ -156,9 +156,8 @@ static int samsung_usb2_phy_probe(struct platform_device *pdev) if (!cfg) return -EINVAL; - drv = devm_kzalloc(dev, sizeof(struct samsung_usb2_phy_driver) + - cfg->num_phys * sizeof(struct samsung_usb2_phy_instance), - GFP_KERNEL); + drv = devm_kzalloc(dev, struct_size(drv, instances, cfg->num_phys), + GFP_KERNEL); if (!drv) return -ENOMEM; diff --git a/drivers/phy/tegra/xusb-tegra124.c b/drivers/phy/tegra/xusb-tegra124.c index e8a2ba6eabd5..98d84920c676 100644 --- a/drivers/phy/tegra/xusb-tegra124.c +++ b/drivers/phy/tegra/xusb-tegra124.c @@ -1713,6 +1713,13 @@ static const struct tegra_xusb_padctl_ops tegra124_xusb_padctl_ops = { .hsic_set_idle = tegra124_hsic_set_idle, }; +static const char * const tegra124_xusb_padctl_supply_names[] = { + "avdd-pll-utmip", + "avdd-pll-erefe", + "avdd-pex-pll", + "hvdd-pex-pll-e", +}; + const struct tegra_xusb_padctl_soc tegra124_xusb_padctl_soc = { .num_pads = ARRAY_SIZE(tegra124_pads), .pads = tegra124_pads, @@ -1735,6 +1742,8 @@ const struct tegra_xusb_padctl_soc tegra124_xusb_padctl_soc = { }, }, .ops = &tegra124_xusb_padctl_ops, + .supply_names = tegra124_xusb_padctl_supply_names, + .num_supplies = ARRAY_SIZE(tegra124_xusb_padctl_supply_names), }; EXPORT_SYMBOL_GPL(tegra124_xusb_padctl_soc); diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c index 18cea8311d22..0c0df6897a3b 100644 --- a/drivers/phy/tegra/xusb-tegra210.c +++ b/drivers/phy/tegra/xusb-tegra210.c @@ -2009,6 +2009,13 @@ static const struct tegra_xusb_padctl_ops tegra210_xusb_padctl_ops = { .hsic_set_idle = tegra210_hsic_set_idle, }; +static const char * const tegra210_xusb_padctl_supply_names[] = { + "avdd-pll-utmip", + "avdd-pll-uerefe", + "dvdd-pex-pll", + "hvdd-pex-pll-e", +}; + const struct tegra_xusb_padctl_soc tegra210_xusb_padctl_soc = { .num_pads = ARRAY_SIZE(tegra210_pads), .pads = tegra210_pads, @@ -2027,6 +2034,8 @@ const struct tegra_xusb_padctl_soc tegra210_xusb_padctl_soc = { }, }, .ops = &tegra210_xusb_padctl_ops, + .supply_names = tegra210_xusb_padctl_supply_names, + .num_supplies = ARRAY_SIZE(tegra210_xusb_padctl_supply_names), }; EXPORT_SYMBOL_GPL(tegra210_xusb_padctl_soc); diff --git a/drivers/phy/ti/phy-am654-serdes.c b/drivers/phy/ti/phy-am654-serdes.c index d3769200cb9b..f8edd0840fa2 100644 --- a/drivers/phy/ti/phy-am654-serdes.c +++ b/drivers/phy/ti/phy-am654-serdes.c @@ -247,8 +247,8 @@ static void serdes_am654_release(struct phy *x) mux_control_deselect(phy->control); } -struct phy *serdes_am654_xlate(struct device *dev, struct of_phandle_args - *args) +static struct phy *serdes_am654_xlate(struct device *dev, + struct of_phandle_args *args) { struct serdes_am654 *am654_phy; struct phy *phy; diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c index 6b8ef01472e9..d5cf953b4337 100644 --- a/drivers/soc/qcom/qcom-geni-se.c +++ b/drivers/soc/qcom/qcom-geni-se.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 // Copyright (c) 2017-2018, The Linux Foundation. All rights reserved. +#include <linux/acpi.h> #include <linux/clk.h> #include <linux/slab.h> #include <linux/dma-mapping.h> @@ -450,6 +451,9 @@ int geni_se_resources_off(struct geni_se *se) { int ret; + if (has_acpi_companion(se->dev)) + return 0; + ret = pinctrl_pm_select_sleep_state(se->dev); if (ret) return ret; @@ -487,6 +491,9 @@ int geni_se_resources_on(struct geni_se *se) { int ret; + if (has_acpi_companion(se->dev)) + return 0; + ret = geni_se_clks_on(se); if (ret) return ret; @@ -724,12 +731,14 @@ static int geni_se_probe(struct platform_device *pdev) if (IS_ERR(wrapper->base)) return PTR_ERR(wrapper->base); - wrapper->ahb_clks[0].id = "m-ahb"; - wrapper->ahb_clks[1].id = "s-ahb"; - ret = devm_clk_bulk_get(dev, NUM_AHB_CLKS, wrapper->ahb_clks); - if (ret) { - dev_err(dev, "Err getting AHB clks %d\n", ret); - return ret; + if (!has_acpi_companion(&pdev->dev)) { + wrapper->ahb_clks[0].id = "m-ahb"; + wrapper->ahb_clks[1].id = "s-ahb"; + ret = devm_clk_bulk_get(dev, NUM_AHB_CLKS, wrapper->ahb_clks); + if (ret) { + dev_err(dev, "Err getting AHB clks %d\n", ret); + return ret; + } } dev_set_drvdata(dev, wrapper); diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index e4b27413f528..94573fb68304 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -74,7 +74,7 @@ config USB After choosing your HCD, then select drivers for the USB peripherals you'll be using. You may want to check out the information provided in <file:Documentation/usb/> and especially the links given in - <file:Documentation/usb/usb-help.txt>. + <file:Documentation/usb/usb-help.rst>. To compile this driver as a module, choose M here: the module will be called usbcore. diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 7d1b8c82b208..ecc2de1ffaae 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -5,6 +5,7 @@ # Object files in subdirectories +obj-$(CONFIG_USB_COMMON) += common/ obj-$(CONFIG_USB) += core/ obj-$(CONFIG_USB_SUPPORT) += phy/ @@ -60,8 +61,6 @@ obj-$(CONFIG_USB_CHIPIDEA) += chipidea/ obj-$(CONFIG_USB_RENESAS_USBHS) += renesas_usbhs/ obj-$(CONFIG_USB_GADGET) += gadget/ -obj-$(CONFIG_USB_COMMON) += common/ - obj-$(CONFIG_USBIP_CORE) += usbip/ obj-$(CONFIG_TYPEC) += typec/ diff --git a/drivers/usb/atm/Kconfig b/drivers/usb/atm/Kconfig index 989aaa3b080d..3d958a1a1a71 100644 --- a/drivers/usb/atm/Kconfig +++ b/drivers/usb/atm/Kconfig @@ -7,7 +7,6 @@ menuconfig USB_ATM tristate "USB DSL modem support" depends on ATM select CRC32 - default n help Say Y here if you want to connect a USB Digital Subscriber Line (DSL) modem to your computer's USB port. You will then need to choose your diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c index 2754b4ce7136..8faa51b1a520 100644 --- a/drivers/usb/atm/ueagle-atm.c +++ b/drivers/usb/atm/ueagle-atm.c @@ -1,55 +1,11 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) -/*- +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause) +/* * Copyright (c) 2003, 2004 * Damien Bergamini <damien.bergamini@free.fr>. All rights reserved. * * Copyright (c) 2005-2007 Matthieu Castet <castet.matthieu@free.fr> * Copyright (c) 2005-2007 Stanislaw Gruszka <stf_xl@wp.pl> * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the - * BSD license below: - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice unmodified, this list of conditions, and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * GPL license : - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * * HISTORY : some part of the code was base on ueagle 1.3 BSD driver, * Damien Bergamini agree to put his code under a DUAL GPL/BSD license. * diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c index ceec8d5985d4..b5abfe89190c 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.c +++ b/drivers/usb/chipidea/ci_hdrc_imx.c @@ -13,6 +13,7 @@ #include <linux/usb/of.h> #include <linux/clk.h> #include <linux/pinctrl/consumer.h> +#include <linux/pm_qos.h> #include "ci.h" #include "ci_hdrc_imx.h" @@ -63,6 +64,11 @@ static const struct ci_hdrc_imx_platform_flag imx7d_usb_data = { .flags = CI_HDRC_SUPPORTS_RUNTIME_PM, }; +static const struct ci_hdrc_imx_platform_flag imx7ulp_usb_data = { + .flags = CI_HDRC_SUPPORTS_RUNTIME_PM | + CI_HDRC_PMQOS, +}; + static const struct of_device_id ci_hdrc_imx_dt_ids[] = { { .compatible = "fsl,imx23-usb", .data = &imx23_usb_data}, { .compatible = "fsl,imx28-usb", .data = &imx28_usb_data}, @@ -72,6 +78,7 @@ static const struct of_device_id ci_hdrc_imx_dt_ids[] = { { .compatible = "fsl,imx6sx-usb", .data = &imx6sx_usb_data}, { .compatible = "fsl,imx6ul-usb", .data = &imx6ul_usb_data}, { .compatible = "fsl,imx7d-usb", .data = &imx7d_usb_data}, + { .compatible = "fsl,imx7ulp-usb", .data = &imx7ulp_usb_data}, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, ci_hdrc_imx_dt_ids); @@ -93,6 +100,8 @@ struct ci_hdrc_imx_data { struct clk *clk_ahb; struct clk *clk_per; /* --------------------------------- */ + struct pm_qos_request pm_qos_req; + const struct ci_hdrc_imx_platform_flag *plat_data; }; /* Common functions shared by usbmisc drivers */ @@ -309,6 +318,8 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) if (!data) return -ENOMEM; + data->plat_data = imx_platform_flag; + pdata.flags |= imx_platform_flag->flags; platform_set_drvdata(pdev, data); data->usbmisc_data = usbmisc_get_init_data(dev); if (IS_ERR(data->usbmisc_data)) @@ -369,6 +380,11 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) } } } + + if (pdata.flags & CI_HDRC_PMQOS) + pm_qos_add_request(&data->pm_qos_req, + PM_QOS_CPU_DMA_LATENCY, 0); + ret = imx_get_clks(dev); if (ret) goto disable_hsic_regulator; @@ -382,8 +398,9 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) ret = PTR_ERR(data->phy); /* Return -EINVAL if no usbphy is available */ if (ret == -ENODEV) - ret = -EINVAL; - goto err_clk; + data->phy = NULL; + else + goto err_clk; } pdata.usb_phy = data->phy; @@ -396,7 +413,6 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) usb_phy_init(pdata.usb_phy); } - pdata.flags |= imx_platform_flag->flags; if (pdata.flags & CI_HDRC_SUPPORTS_RUNTIME_PM) data->supports_runtime_pm = true; @@ -439,6 +455,8 @@ err_clk: disable_hsic_regulator: if (data->hsic_pad_regulator) ret = regulator_disable(data->hsic_pad_regulator); + if (pdata.flags & CI_HDRC_PMQOS) + pm_qos_remove_request(&data->pm_qos_req); return ret; } @@ -455,6 +473,8 @@ static int ci_hdrc_imx_remove(struct platform_device *pdev) if (data->override_phy_control) usb_phy_shutdown(data->phy); imx_disable_unprepare_clks(&pdev->dev); + if (data->plat_data->flags & CI_HDRC_PMQOS) + pm_qos_remove_request(&data->pm_qos_req); if (data->hsic_pad_regulator) regulator_disable(data->hsic_pad_regulator); @@ -480,6 +500,9 @@ static int __maybe_unused imx_controller_suspend(struct device *dev) } imx_disable_unprepare_clks(dev); + if (data->plat_data->flags & CI_HDRC_PMQOS) + pm_qos_remove_request(&data->pm_qos_req); + data->in_lpm = true; return 0; @@ -497,6 +520,10 @@ static int __maybe_unused imx_controller_resume(struct device *dev) return 0; } + if (data->plat_data->flags & CI_HDRC_PMQOS) + pm_qos_add_request(&data->pm_qos_req, + PM_QOS_CPU_DMA_LATENCY, 0); + ret = imx_prepare_enable_clks(dev); if (ret) return ret; diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c b/drivers/usb/chipidea/ci_hdrc_msm.c index b8b3caad889c..bb4645a8ca46 100644 --- a/drivers/usb/chipidea/ci_hdrc_msm.c +++ b/drivers/usb/chipidea/ci_hdrc_msm.c @@ -175,7 +175,6 @@ static int ci_hdrc_msm_probe(struct platform_device *pdev) struct platform_device *plat_ci; struct clk *clk; struct reset_control *reset; - struct resource *res; int ret; struct device_node *ulpi_node, *phy_node; @@ -209,8 +208,7 @@ static int ci_hdrc_msm_probe(struct platform_device *pdev) if (IS_ERR(clk)) return PTR_ERR(clk); - res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - ci->base = devm_ioremap_resource(&pdev->dev, res); + ci->base = devm_platform_ioremap_resource(pdev, 1); if (IS_ERR(ci->base)) return PTR_ERR(ci->base); diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 27749ace2d93..26062d610c20 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -523,8 +523,9 @@ int hw_device_reset(struct ci_hdrc *ci) hw_write(ci, OP_USBMODE, USBMODE_SLOM, USBMODE_SLOM); if (hw_read(ci, OP_USBMODE, USBMODE_CM) != USBMODE_CM_DC) { - pr_err("cannot enter in %s device mode", ci_role(ci)->name); - pr_err("lpm = %i", ci->hw_bank.lpm); + dev_err(ci->dev, "cannot enter in %s device mode\n", + ci_role(ci)->name); + dev_err(ci->dev, "lpm = %i\n", ci->hw_bank.lpm); return -ENODEV; } diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c index d8b67e150b12..078c1fdce493 100644 --- a/drivers/usb/chipidea/usbmisc_imx.c +++ b/drivers/usb/chipidea/usbmisc_imx.c @@ -763,13 +763,16 @@ static const struct of_device_id usbmisc_imx_dt_ids[] = { .compatible = "fsl,imx7d-usbmisc", .data = &imx7d_usbmisc_ops, }, + { + .compatible = "fsl,imx7ulp-usbmisc", + .data = &imx7d_usbmisc_ops, + }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, usbmisc_imx_dt_ids); static int usbmisc_imx_probe(struct platform_device *pdev) { - struct resource *res; struct imx_usbmisc *data; const struct of_device_id *of_id; @@ -783,8 +786,7 @@ static int usbmisc_imx_probe(struct platform_device *pdev) spin_lock_init(&data->lock); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - data->base = devm_ioremap_resource(&pdev->dev, res); + data->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(data->base)) return PTR_ERR(data->base); diff --git a/drivers/usb/class/Kconfig b/drivers/usb/class/Kconfig index 52f3a531a82f..f8a798900093 100644 --- a/drivers/usb/class/Kconfig +++ b/drivers/usb/class/Kconfig @@ -10,7 +10,7 @@ config USB_ACM ---help--- This driver supports USB modems and ISDN adapters which support the Communication Device Class Abstract Control Model interface. - Please read <file:Documentation/usb/acm.txt> for details. + Please read <file:Documentation/usb/acm.rst> for details. If your modem only reports "Cls=ff(vend.)" in the descriptors in /sys/kernel/debug/usb/devices, then your modem will not work with this diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 9e9caff905d5..a7824a51f86d 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -949,7 +949,7 @@ struct usb_driver *usb_cdc_wdm_register(struct usb_interface *intf, int bufsize, int (*manage_power)(struct usb_interface *, int)) { - int rv = -EINVAL; + int rv; rv = wdm_create(intf, ep, bufsize, manage_power); if (rv < 0) diff --git a/drivers/usb/common/common.c b/drivers/usb/common/common.c index 18f5dcf58b0d..1433260d99b4 100644 --- a/drivers/usb/common/common.c +++ b/drivers/usb/common/common.c @@ -15,6 +15,8 @@ #include <linux/usb/of.h> #include <linux/usb/otg.h> #include <linux/of_platform.h> +#include <linux/debugfs.h> +#include "common.h" static const char *const ep_type_names[] = { [USB_ENDPOINT_XFER_CONTROL] = "ctrl", @@ -291,4 +293,23 @@ struct device *usb_of_get_companion_dev(struct device *dev) EXPORT_SYMBOL_GPL(usb_of_get_companion_dev); #endif +struct dentry *usb_debug_root; +EXPORT_SYMBOL_GPL(usb_debug_root); + +static int __init usb_common_init(void) +{ + usb_debug_root = debugfs_create_dir("usb", NULL); + ledtrig_usb_init(); + return 0; +} + +static void __exit usb_common_exit(void) +{ + ledtrig_usb_exit(); + debugfs_remove_recursive(usb_debug_root); +} + +subsys_initcall(usb_common_init); +module_exit(usb_common_exit); + MODULE_LICENSE("GPL"); diff --git a/drivers/usb/common/common.h b/drivers/usb/common/common.h new file mode 100644 index 000000000000..424a91316a4b --- /dev/null +++ b/drivers/usb/common/common.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef __LINUX_USB_COMMON_H +#define __LINUX_USB_COMMON_H + +#if defined(CONFIG_USB_LED_TRIG) +void ledtrig_usb_init(void); +void ledtrig_usb_exit(void); +#else +static inline void ledtrig_usb_init(void) { } +static inline void ledtrig_usb_exit(void) { } +#endif + +#endif /* __LINUX_USB_COMMON_H */ diff --git a/drivers/usb/common/led.c b/drivers/usb/common/led.c index 7bd81166b77d..0865dd44a80a 100644 --- a/drivers/usb/common/led.c +++ b/drivers/usb/common/led.c @@ -10,6 +10,7 @@ #include <linux/init.h> #include <linux/leds.h> #include <linux/usb.h> +#include "common.h" #define BLINK_DELAY 30 @@ -36,18 +37,14 @@ void usb_led_activity(enum usb_led_event ev) EXPORT_SYMBOL_GPL(usb_led_activity); -static int __init ledtrig_usb_init(void) +void __init ledtrig_usb_init(void) { led_trigger_register_simple("usb-gadget", &ledtrig_usb_gadget); led_trigger_register_simple("usb-host", &ledtrig_usb_host); - return 0; } -static void __exit ledtrig_usb_exit(void) +void __exit ledtrig_usb_exit(void) { led_trigger_unregister_simple(ledtrig_usb_gadget); led_trigger_unregister_simple(ledtrig_usb_host); } - -module_init(ledtrig_usb_init); -module_exit(ledtrig_usb_exit); diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index bdb6bd0b63a6..ecaacc8ed311 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -45,7 +45,6 @@ config USB_DYNAMIC_MINORS config USB_OTG bool "OTG support" depends on PM - default n help The most notable feature of USB OTG is support for a "Dual-Role" device, which can act as either a device diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index a02448105527..e2f316ac8b01 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -48,9 +48,6 @@ #define USB_DEVICE_MAX (USB_MAXBUS * 128) #define USB_SG_SIZE 16384 /* split-size for large txs */ -/* Mutual exclusion for removal, open, and release */ -DEFINE_MUTEX(usbfs_mutex); - struct usb_dev_state { struct list_head list; /* state list */ struct usb_device *dev; @@ -977,15 +974,9 @@ static int usbdev_open(struct inode *inode, struct file *file) ret = -ENODEV; - /* Protect against simultaneous removal or release */ - mutex_lock(&usbfs_mutex); - /* usbdev device-node */ if (imajor(inode) == USB_DEVICE_MAJOR) dev = usbdev_lookup_by_devt(inode->i_rdev); - - mutex_unlock(&usbfs_mutex); - if (!dev) goto out_free_ps; @@ -1306,6 +1297,39 @@ static int proc_connectinfo(struct usb_dev_state *ps, void __user *arg) return 0; } +static int proc_conninfo_ex(struct usb_dev_state *ps, + void __user *arg, size_t size) +{ + struct usbdevfs_conninfo_ex ci; + struct usb_device *udev = ps->dev; + + if (size < sizeof(ci.size)) + return -EINVAL; + + memset(&ci, 0, sizeof(ci)); + ci.size = sizeof(ci); + ci.busnum = udev->bus->busnum; + ci.devnum = udev->devnum; + ci.speed = udev->speed; + + while (udev && udev->portnum != 0) { + if (++ci.num_ports <= ARRAY_SIZE(ci.ports)) + ci.ports[ARRAY_SIZE(ci.ports) - ci.num_ports] = + udev->portnum; + udev = udev->parent; + } + + if (ci.num_ports < ARRAY_SIZE(ci.ports)) + memmove(&ci.ports[0], + &ci.ports[ARRAY_SIZE(ci.ports) - ci.num_ports], + ci.num_ports); + + if (copy_to_user(arg, &ci, min(sizeof(ci), size))) + return -EFAULT; + + return 0; +} + static int proc_resetdevice(struct usb_dev_state *ps) { struct usb_host_config *actconfig = ps->dev->actconfig; @@ -1484,15 +1508,15 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb ret = -EFAULT; goto error; } - if (uurb->buffer_length < (le16_to_cpup(&dr->wLength) + 8)) { + if (uurb->buffer_length < (le16_to_cpu(dr->wLength) + 8)) { ret = -EINVAL; goto error; } ret = check_ctrlrecip(ps, dr->bRequestType, dr->bRequest, - le16_to_cpup(&dr->wIndex)); + le16_to_cpu(dr->wIndex)); if (ret) goto error; - uurb->buffer_length = le16_to_cpup(&dr->wLength); + uurb->buffer_length = le16_to_cpu(dr->wLength); uurb->buffer += 8; if ((dr->bRequestType & USB_DIR_IN) && uurb->buffer_length) { is_in = 1; @@ -1507,9 +1531,9 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb "bRequest=%02x wValue=%04x " "wIndex=%04x wLength=%04x\n", dr->bRequestType, dr->bRequest, - __le16_to_cpup(&dr->wValue), - __le16_to_cpup(&dr->wIndex), - __le16_to_cpup(&dr->wLength)); + __le16_to_cpu(dr->wValue), + __le16_to_cpu(dr->wIndex), + __le16_to_cpu(dr->wLength)); u = sizeof(struct usb_ctrlrequest); break; @@ -2137,6 +2161,9 @@ static int proc_ioctl(struct usb_dev_state *ps, struct usbdevfs_ioctl *ctl) if (ps->privileges_dropped) return -EACCES; + if (!connected(ps)) + return -ENODEV; + /* alloc buffer */ size = _IOC_SIZE(ctl->ioctl_code); if (size > 0) { @@ -2153,11 +2180,6 @@ static int proc_ioctl(struct usb_dev_state *ps, struct usbdevfs_ioctl *ctl) } } - if (!connected(ps)) { - kfree(buf); - return -ENODEV; - } - if (ps->dev->state != USB_STATE_CONFIGURED) retval = -EHOSTUNREACH; else if (!(intf = usb_ifnum_to_if(ps->dev, ctl->ifno))) @@ -2259,7 +2281,7 @@ static int proc_get_capabilities(struct usb_dev_state *ps, void __user *arg) caps = USBDEVFS_CAP_ZERO_PACKET | USBDEVFS_CAP_NO_PACKET_SIZE_LIM | USBDEVFS_CAP_REAP_AFTER_DISCONNECT | USBDEVFS_CAP_MMAP | - USBDEVFS_CAP_DROP_PRIVILEGES; + USBDEVFS_CAP_DROP_PRIVILEGES | USBDEVFS_CAP_CONNINFO_EX; if (!ps->dev->bus->no_stop_on_short) caps |= USBDEVFS_CAP_BULK_CONTINUATION; if (ps->dev->bus->sg_tablesize) @@ -2558,6 +2580,13 @@ static long usbdev_do_ioctl(struct file *file, unsigned int cmd, break; } + /* Handle variable-length commands */ + switch (cmd & ~IOCSIZE_MASK) { + case USBDEVFS_CONNINFO_EX(0): + ret = proc_conninfo_ex(ps, p, _IOC_SIZE(cmd)); + break; + } + done: usb_unlock_device(dev); if (ret >= 0) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 2f94568ba385..236313f41f4a 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -873,7 +873,7 @@ int usb_hub_clear_tt_buffer(struct urb *urb) /* info that CLEAR_TT_BUFFER needs */ clear->tt = tt->multi ? udev->ttport : 1; clear->devinfo = usb_pipeendpoint (pipe); - clear->devinfo |= udev->devnum << 4; + clear->devinfo |= ((u16)udev->devaddr) << 4; clear->devinfo |= usb_pipecontrol(pipe) ? (USB_ENDPOINT_XFER_CONTROL << 11) : (USB_ENDPOINT_XFER_BULK << 11); @@ -2125,6 +2125,8 @@ static void update_devnum(struct usb_device *udev, int devnum) /* The address for a WUSB device is managed by wusbcore. */ if (!udev->wusb) udev->devnum = devnum; + if (!udev->devaddr) + udev->devaddr = (u8)devnum; } static void hub_free_dev(struct usb_device *udev) @@ -2719,7 +2721,7 @@ static bool use_new_scheme(struct usb_device *udev, int retry, } /* Is a USB 3.0 port in the Inactive or Compliance Mode state? - * Port worm reset is required to recover + * Port warm reset is required to recover */ static bool hub_port_warm_reset_required(struct usb_hub *hub, int port1, u16 portstatus) @@ -3617,6 +3619,7 @@ static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port, struct usb_device *hdev; struct usb_device *udev; int connect_change = 0; + u16 link_state; int ret; hdev = hub->hdev; @@ -3626,9 +3629,11 @@ static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port, return 0; usb_clear_port_feature(hdev, port, USB_PORT_FEAT_C_SUSPEND); } else { + link_state = portstatus & USB_PORT_STAT_LINK_STATE; if (!udev || udev->state != USB_STATE_SUSPENDED || - (portstatus & USB_PORT_STAT_LINK_STATE) != - USB_SS_PORT_LS_U0) + (link_state != USB_SS_PORT_LS_U0 && + link_state != USB_SS_PORT_LS_U1 && + link_state != USB_SS_PORT_LS_U2)) return 0; } @@ -3999,6 +4004,9 @@ static int usb_set_lpm_timeout(struct usb_device *udev, * control transfers to set the hub timeout or enable device-initiated U1/U2 * will be successful. * + * If the control transfer to enable device-initiated U1/U2 entry fails, then + * hub-initiated U1/U2 will be disabled. + * * If we cannot set the parent hub U1/U2 timeout, we attempt to let the xHCI * driver know about it. If that call fails, it should be harmless, and just * take up more slightly more bus bandwidth for unnecessary U1/U2 exit latency. @@ -4053,23 +4061,24 @@ static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev, * host know that this link state won't be enabled. */ hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state); - } else { - /* Only a configured device will accept the Set Feature - * U1/U2_ENABLE - */ - if (udev->actconfig) - usb_set_device_initiated_lpm(udev, state, true); + return; + } - /* As soon as usb_set_lpm_timeout(timeout) returns 0, the - * hub-initiated LPM is enabled. Thus, LPM is enabled no - * matter the result of usb_set_device_initiated_lpm(). - * The only difference is whether device is able to initiate - * LPM. - */ + /* Only a configured device will accept the Set Feature + * U1/U2_ENABLE + */ + if (udev->actconfig && + usb_set_device_initiated_lpm(udev, state, true) == 0) { if (state == USB3_LPM_U1) udev->usb3_lpm_u1_enabled = 1; else if (state == USB3_LPM_U2) udev->usb3_lpm_u2_enabled = 1; + } else { + /* Don't request U1/U2 entry if the device + * cannot transition to U1/U2. + */ + usb_set_lpm_timeout(udev, state, 0); + hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state); } } @@ -4139,7 +4148,7 @@ int usb_disable_lpm(struct usb_device *udev) if (!udev || !udev->parent || udev->speed < USB_SPEED_SUPER || !udev->lpm_capable || - udev->state < USB_STATE_DEFAULT) + udev->state < USB_STATE_CONFIGURED) return 0; hcd = bus_to_hcd(udev->bus); @@ -4198,7 +4207,7 @@ void usb_enable_lpm(struct usb_device *udev) if (!udev || !udev->parent || udev->speed < USB_SPEED_SUPER || !udev->lpm_capable || - udev->state < USB_STATE_DEFAULT) + udev->state < USB_STATE_CONFIGURED) return; udev->lpm_disable_count--; diff --git a/drivers/usb/core/notify.c b/drivers/usb/core/notify.c index ab474b11523e..e6143663778f 100644 --- a/drivers/usb/core/notify.c +++ b/drivers/usb/core/notify.c @@ -53,11 +53,8 @@ void usb_notify_add_device(struct usb_device *udev) void usb_notify_remove_device(struct usb_device *udev) { - /* Protect against simultaneous usbfs open */ - mutex_lock(&usbfs_mutex); blocking_notifier_call_chain(&usb_notifier_list, USB_DEVICE_REMOVE, udev); - mutex_unlock(&usbfs_mutex); } void usb_notify_add_bus(struct usb_bus *ubus) diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 7fcb9f782931..5a0df527a8ca 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -1185,19 +1185,17 @@ static struct notifier_block usb_bus_nb = { .notifier_call = usb_bus_notify, }; -struct dentry *usb_debug_root; -EXPORT_SYMBOL_GPL(usb_debug_root); +static struct dentry *usb_devices_root; static void usb_debugfs_init(void) { - usb_debug_root = debugfs_create_dir("usb", NULL); - debugfs_create_file("devices", 0444, usb_debug_root, NULL, - &usbfs_devices_fops); + usb_devices_root = debugfs_create_file("devices", 0444, usb_debug_root, + NULL, &usbfs_devices_fops); } static void usb_debugfs_cleanup(void) { - debugfs_remove_recursive(usb_debug_root); + debugfs_remove(usb_devices_root); } /* diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index d95a5358f73d..bd8d01f85a13 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -169,7 +169,6 @@ extern const struct attribute_group *usb_device_groups[]; extern const struct attribute_group *usb_interface_groups[]; /* usbfs stuff */ -extern struct mutex usbfs_mutex; extern struct usb_driver usbfs_driver; extern const struct file_operations usbfs_devices_fops; extern const struct file_operations usbdev_file_operations; diff --git a/drivers/usb/dwc2/Kconfig b/drivers/usb/dwc2/Kconfig index 68d095ae2865..16e1aa304edc 100644 --- a/drivers/usb/dwc2/Kconfig +++ b/drivers/usb/dwc2/Kconfig @@ -58,7 +58,6 @@ config USB_DWC2_PCI tristate "DWC2 PCI" depends on USB_PCI depends on USB_GADGET || !USB_GADGET - default n select NOP_USB_XCEIV help The Designware USB2.0 PCI interface module for controllers diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c index 8b499d643461..8e41d70fd298 100644 --- a/drivers/usb/dwc2/core.c +++ b/drivers/usb/dwc2/core.c @@ -531,7 +531,7 @@ int dwc2_core_reset(struct dwc2_hsotg *hsotg, bool skip_wait) } /* Wait for AHB master IDLE state */ - if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL, GRSTCTL_AHBIDLE, 50)) { + if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL, GRSTCTL_AHBIDLE, 10000)) { dev_warn(hsotg->dev, "%s: HANG! AHB Idle timeout GRSTCTL GRSTCTL_AHBIDLE\n", __func__); return -EBUSY; diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index 152ac41dfb2d..d08d070a0fb6 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -861,6 +861,9 @@ struct dwc2_hregs_backup { * @hibernated: True if core is hibernated * @reset_phy_on_wake: Quirk saying that we should assert PHY reset on a * remote wakeup. + * @phy_off_for_suspend: Status of whether we turned the PHY off at suspend. + * @need_phy_for_wake: Quirk saying that we should keep the PHY on at + * suspend if we need USB to wake us up. * @frame_number: Frame number read from the core. For both device * and host modes. The value ranges are from 0 * to HFNUM_MAX_FRNUM. @@ -1049,6 +1052,8 @@ struct dwc2_hsotg { unsigned int ll_hw_enabled:1; unsigned int hibernated:1; unsigned int reset_phy_on_wake:1; + unsigned int need_phy_for_wake:1; + unsigned int phy_off_for_suspend:1; u16 frame_number; struct phy *phy; @@ -1438,6 +1443,7 @@ int dwc2_restore_host_registers(struct dwc2_hsotg *hsotg); int dwc2_host_enter_hibernation(struct dwc2_hsotg *hsotg); int dwc2_host_exit_hibernation(struct dwc2_hsotg *hsotg, int rem_wakeup, int reset); +bool dwc2_host_can_poweroff_phy(struct dwc2_hsotg *dwc2); static inline void dwc2_host_schedule_phy_reset(struct dwc2_hsotg *hsotg) { schedule_work(&hsotg->phy_reset_work); } #else @@ -1463,6 +1469,8 @@ static inline int dwc2_host_enter_hibernation(struct dwc2_hsotg *hsotg) static inline int dwc2_host_exit_hibernation(struct dwc2_hsotg *hsotg, int rem_wakeup, int reset) { return 0; } +static inline bool dwc2_host_can_poweroff_phy(struct dwc2_hsotg *dwc2) +{ return false; } static inline void dwc2_host_schedule_phy_reset(struct dwc2_hsotg *hsotg) {} #endif diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index 2192a2873c7c..ee144ff8af5b 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -4685,7 +4685,6 @@ fail2: spin_unlock_irqrestore(&hsotg->lock, flags); urb->hcpriv = NULL; kfree(qtd); - qtd = NULL; fail1: if (qh_allocated) { struct dwc2_qtd *qtd2, *qtd2_tmp; @@ -5587,3 +5586,22 @@ int dwc2_host_exit_hibernation(struct dwc2_hsotg *hsotg, int rem_wakeup, dev_dbg(hsotg->dev, "Host hibernation restore complete\n"); return ret; } + +bool dwc2_host_can_poweroff_phy(struct dwc2_hsotg *dwc2) +{ + struct usb_device *root_hub = dwc2_hsotg_to_hcd(dwc2)->self.root_hub; + + /* If the controller isn't allowed to wakeup then we can power off. */ + if (!device_may_wakeup(dwc2->dev)) + return true; + + /* + * We don't want to power off the PHY if something under the + * root hub has wakeup enabled. + */ + if (usb_wakeup_enabled_descendants(root_hub)) + return false; + + /* No reason to keep the PHY powered, so allow poweroff */ + return true; +} diff --git a/drivers/usb/dwc2/hcd.h b/drivers/usb/dwc2/hcd.h index ce6445a06588..8ca6d12a6f57 100644 --- a/drivers/usb/dwc2/hcd.h +++ b/drivers/usb/dwc2/hcd.h @@ -582,7 +582,6 @@ static inline void dwc2_hcd_qtd_unlink_and_free(struct dwc2_hsotg *hsotg, { list_del(&qtd->qtd_list_entry); kfree(qtd); - qtd = NULL; } /* Descriptor DMA support functions */ diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c index 5949262ff669..55f841a54015 100644 --- a/drivers/usb/dwc2/params.c +++ b/drivers/usb/dwc2/params.c @@ -76,6 +76,7 @@ static void dwc2_set_s3c6400_params(struct dwc2_hsotg *hsotg) struct dwc2_core_params *p = &hsotg->params; p->power_down = 0; + p->phy_utmi_width = 8; } static void dwc2_set_rk_params(struct dwc2_hsotg *hsotg) diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c index e98d7812da2d..80fd3c6dcd1c 100644 --- a/drivers/usb/dwc2/platform.c +++ b/drivers/usb/dwc2/platform.c @@ -438,6 +438,10 @@ static int dwc2_driver_probe(struct platform_device *dev) if (retval) goto error; + hsotg->need_phy_for_wake = + of_property_read_bool(dev->dev.of_node, + "snps,need-phy-for-wake"); + /* * Reset before dwc2_get_hwparams() then it could get power-on real * reset value form registers. @@ -469,6 +473,14 @@ static int dwc2_driver_probe(struct platform_device *dev) hsotg->gadget_enabled = 1; } + /* + * If we need PHY for wakeup we must be wakeup capable. + * When we have a device that can wake without the PHY we + * can adjust this condition. + */ + if (hsotg->need_phy_for_wake) + device_set_wakeup_capable(&dev->dev, true); + hsotg->reset_phy_on_wake = of_property_read_bool(dev->dev.of_node, "snps,reset-phy-on-wake"); @@ -507,13 +519,17 @@ error: static int __maybe_unused dwc2_suspend(struct device *dev) { struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev); + bool is_device_mode = dwc2_is_device_mode(dwc2); int ret = 0; - if (dwc2_is_device_mode(dwc2)) + if (is_device_mode) dwc2_hsotg_suspend(dwc2); - if (dwc2->ll_hw_enabled) + if (dwc2->ll_hw_enabled && + (is_device_mode || dwc2_host_can_poweroff_phy(dwc2))) { ret = __dwc2_lowlevel_hw_disable(dwc2); + dwc2->phy_off_for_suspend = true; + } return ret; } @@ -523,11 +539,12 @@ static int __maybe_unused dwc2_resume(struct device *dev) struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev); int ret = 0; - if (dwc2->ll_hw_enabled) { + if (dwc2->phy_off_for_suspend && dwc2->ll_hw_enabled) { ret = __dwc2_lowlevel_hw_enable(dwc2); if (ret) return ret; } + dwc2->phy_off_for_suspend = false; if (dwc2_is_device_mode(dwc2)) ret = dwc2_hsotg_resume(dwc2); diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig index 4a62045cc812..89abc6078703 100644 --- a/drivers/usb/dwc3/Kconfig +++ b/drivers/usb/dwc3/Kconfig @@ -128,7 +128,7 @@ config USB_DWC3_QCOM tristate "Qualcomm Platform" depends on ARCH_QCOM || COMPILE_TEST depends on EXTCON || !EXTCON - depends on OF + depends on (OF || ACPI) default USB_DWC3 help Some Qualcomm SoCs use DesignWare Core IP for USB2/3 diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 4aff1d8dbc4f..c9bb93a2c81e 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -1282,6 +1282,10 @@ static void dwc3_get_properties(struct dwc3 *dwc) "snps,dis_u2_susphy_quirk"); dwc->dis_enblslpm_quirk = device_property_read_bool(dev, "snps,dis_enblslpm_quirk"); + dwc->dis_u1_entry_quirk = device_property_read_bool(dev, + "snps,dis-u1-entry-quirk"); + dwc->dis_u2_entry_quirk = device_property_read_bool(dev, + "snps,dis-u2-entry-quirk"); dwc->dis_rxdet_inp3_quirk = device_property_read_bool(dev, "snps,dis_rxdet_inp3_quirk"); dwc->dis_u2_freeclk_exists_quirk = device_property_read_bool(dev, @@ -1423,11 +1427,6 @@ static int dwc3_probe(struct platform_device *pdev) dwc->regs = regs; dwc->regs_size = resource_size(&dwc_res); - if (!dwc3_core_is_valid(dwc)) { - dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n"); - return -ENODEV; - } - dwc3_get_properties(dwc); dwc->reset = devm_reset_control_get_optional_shared(dev, NULL); @@ -1460,6 +1459,12 @@ static int dwc3_probe(struct platform_device *pdev) if (ret) goto unprepare_clks; + if (!dwc3_core_is_valid(dwc)) { + dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n"); + ret = -ENODEV; + goto disable_clks; + } + platform_set_drvdata(pdev, dwc); dwc3_cache_hwparams(dwc); @@ -1525,6 +1530,7 @@ err1: pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); +disable_clks: clk_bulk_disable(dwc->num_clks, dwc->clks); unprepare_clks: clk_bulk_unprepare(dwc->num_clks, dwc->clks); diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index f19cbeb01087..3dd783b889cb 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -649,7 +649,6 @@ struct dwc3_event_buffer { * @cancelled_list: list of cancelled requests for this endpoint * @pending_list: list of pending requests for this endpoint * @started_list: list of started requests on this endpoint - * @lock: spinlock for endpoint request queue traversal * @regs: pointer to first endpoint register * @trb_pool: array of transaction buffers * @trb_pool_dma: dma address of @trb_pool @@ -677,7 +676,6 @@ struct dwc3_ep { struct list_head pending_list; struct list_head started_list; - spinlock_t lock; void __iomem *regs; struct dwc3_trb *trb_pool; @@ -1014,6 +1012,8 @@ struct dwc3_scratchpad_array { * @dis_u2_susphy_quirk: set if we disable usb2 suspend phy * @dis_enblslpm_quirk: set if we clear enblslpm in GUSB2PHYCFG, * disabling the suspend signal to the PHY. + * @dis_u1_entry_quirk: set if link entering into U1 state needs to be disabled. + * @dis_u2_entry_quirk: set if link entering into U2 state needs to be disabled. * @dis_rxdet_inp3_quirk: set if we disable Rx.Detect in P3 * @dis_u2_freeclk_exists_quirk : set if we clear u2_freeclk_exists * in GUSB2PHYCFG, specify that USB2 PHY doesn't @@ -1205,6 +1205,8 @@ struct dwc3 { unsigned dis_u3_susphy_quirk:1; unsigned dis_u2_susphy_quirk:1; unsigned dis_enblslpm_quirk:1; + unsigned dis_u1_entry_quirk:1; + unsigned dis_u2_entry_quirk:1; unsigned dis_rxdet_inp3_quirk:1; unsigned dis_u2_freeclk_exists_quirk:1; unsigned dis_del_phy_power_chg_quirk:1; diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c index 2aec31a2eacb..bca7e92a10e9 100644 --- a/drivers/usb/dwc3/dwc3-meson-g12a.c +++ b/drivers/usb/dwc3/dwc3-meson-g12a.c @@ -11,9 +11,7 @@ * - Control registers for each USB2 Ports * - Control registers for the USB PHY layer * - SuperSpeed PHY can be enabled only if port is used - * - * TOFIX: - * - Add dynamic OTG switching with ID change interrupt + * - Dynamic OTG switching with ID change interrupt */ #include <linux/module.h> @@ -348,6 +346,22 @@ static enum usb_role dwc3_meson_g12a_role_get(struct device *dev) USB_ROLE_HOST : USB_ROLE_DEVICE; } +static irqreturn_t dwc3_meson_g12a_irq_thread(int irq, void *data) +{ + struct dwc3_meson_g12a *priv = data; + enum phy_mode otg_id; + + otg_id = dwc3_meson_g12a_get_id(priv); + if (otg_id != priv->otg_phy_mode) { + if (dwc3_meson_g12a_otg_mode_set(priv, otg_id)) + dev_warn(priv->dev, "Failed to switch OTG mode\n"); + } + + regmap_update_bits(priv->regmap, USB_R5, USB_R5_ID_DIG_IRQ, 0); + + return IRQ_HANDLED; +} + static struct device *dwc3_meson_g12_find_child(struct device *dev, const char *compatible) { @@ -374,7 +388,7 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev) void __iomem *base; struct resource *res; enum phy_mode otg_id; - int ret, i; + int ret, i, irq; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) @@ -436,6 +450,19 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev) /* Get dr_mode */ priv->otg_mode = usb_get_dr_mode(dev); + if (priv->otg_mode == USB_DR_MODE_OTG) { + /* Ack irq before registering */ + regmap_update_bits(priv->regmap, USB_R5, + USB_R5_ID_DIG_IRQ, 0); + + irq = platform_get_irq(pdev, 0); + ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, + dwc3_meson_g12a_irq_thread, + IRQF_ONESHOT, pdev->name, priv); + if (ret) + return ret; + } + dwc3_meson_g12a_usb_init(priv); /* Init PHYs */ @@ -460,7 +487,6 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev) /* Setup OTG mode corresponding to the ID pin */ if (priv->otg_mode == USB_DR_MODE_OTG) { - /* TOFIX Handle ID mode toggling via IRQ */ otg_id = dwc3_meson_g12a_get_id(priv); if (otg_id != priv->otg_phy_mode) { if (dwc3_meson_g12a_otg_mode_set(priv, otg_id)) diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 8cced3609e24..5e8e18222f92 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -34,6 +34,8 @@ #define PCI_DEVICE_ID_INTEL_CNPLP 0x9dee #define PCI_DEVICE_ID_INTEL_CNPH 0xa36e #define PCI_DEVICE_ID_INTEL_ICLLP 0x34ee +#define PCI_DEVICE_ID_INTEL_EHLLP 0x4b7e +#define PCI_DEVICE_ID_INTEL_TGPLP 0xa0ee #define PCI_INTEL_BXT_DSM_GUID "732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511" #define PCI_INTEL_BXT_FUNC_PMU_PWR 4 @@ -339,6 +341,12 @@ static const struct pci_device_id dwc3_pci_id_table[] = { { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICLLP), (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_EHLLP), + (kernel_ulong_t) &dwc3_pci_intel_properties, }, + + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TGPLP), + (kernel_ulong_t) &dwc3_pci_intel_properties, }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_NL_USB), (kernel_ulong_t) &dwc3_pci_amd_properties, }, { } /* Terminating Entry */ diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c index 184df4daa590..261af9e38ddd 100644 --- a/drivers/usb/dwc3/dwc3-qcom.c +++ b/drivers/usb/dwc3/dwc3-qcom.c @@ -4,6 +4,7 @@ * Inspired by dwc3-of-simple.c */ +#include <linux/acpi.h> #include <linux/io.h> #include <linux/of.h> #include <linux/clk.h> @@ -38,6 +39,20 @@ #define PWR_EVNT_LPM_IN_L2_MASK BIT(4) #define PWR_EVNT_LPM_OUT_L2_MASK BIT(5) +#define SDM845_QSCRATCH_BASE_OFFSET 0xf8800 +#define SDM845_QSCRATCH_SIZE 0x400 +#define SDM845_DWC3_CORE_SIZE 0xcd00 + +struct dwc3_acpi_pdata { + u32 qscratch_base_offset; + u32 qscratch_base_size; + u32 dwc3_core_base_size; + int hs_phy_irq_index; + int dp_hs_phy_irq_index; + int dm_hs_phy_irq_index; + int ss_phy_irq_index; +}; + struct dwc3_qcom { struct device *dev; void __iomem *qscratch_base; @@ -56,6 +71,8 @@ struct dwc3_qcom { struct notifier_block vbus_nb; struct notifier_block host_nb; + const struct dwc3_acpi_pdata *acpi_pdata; + enum usb_dr_mode mode; bool is_suspended; bool pm_suspended; @@ -300,12 +317,27 @@ static void dwc3_qcom_select_utmi_clk(struct dwc3_qcom *qcom) PIPE_UTMI_CLK_DIS); } +static int dwc3_qcom_get_irq(struct platform_device *pdev, + const char *name, int num) +{ + struct device_node *np = pdev->dev.of_node; + int ret; + + if (np) + ret = platform_get_irq_byname(pdev, name); + else + ret = platform_get_irq(pdev, num); + + return ret; +} + static int dwc3_qcom_setup_irq(struct platform_device *pdev) { struct dwc3_qcom *qcom = platform_get_drvdata(pdev); + const struct dwc3_acpi_pdata *pdata = qcom->acpi_pdata; int irq, ret; - - irq = platform_get_irq_byname(pdev, "hs_phy_irq"); + irq = dwc3_qcom_get_irq(pdev, "hs_phy_irq", + pdata ? pdata->hs_phy_irq_index : -1); if (irq > 0) { /* Keep wakeup interrupts disabled until suspend */ irq_set_status_flags(irq, IRQ_NOAUTOEN); @@ -320,7 +352,8 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev) qcom->hs_phy_irq = irq; } - irq = platform_get_irq_byname(pdev, "dp_hs_phy_irq"); + irq = dwc3_qcom_get_irq(pdev, "dp_hs_phy_irq", + pdata ? pdata->dp_hs_phy_irq_index : -1); if (irq > 0) { irq_set_status_flags(irq, IRQ_NOAUTOEN); ret = devm_request_threaded_irq(qcom->dev, irq, NULL, @@ -334,7 +367,8 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev) qcom->dp_hs_phy_irq = irq; } - irq = platform_get_irq_byname(pdev, "dm_hs_phy_irq"); + irq = dwc3_qcom_get_irq(pdev, "dm_hs_phy_irq", + pdata ? pdata->dm_hs_phy_irq_index : -1); if (irq > 0) { irq_set_status_flags(irq, IRQ_NOAUTOEN); ret = devm_request_threaded_irq(qcom->dev, irq, NULL, @@ -348,7 +382,8 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev) qcom->dm_hs_phy_irq = irq; } - irq = platform_get_irq_byname(pdev, "ss_phy_irq"); + irq = dwc3_qcom_get_irq(pdev, "ss_phy_irq", + pdata ? pdata->ss_phy_irq_index : -1); if (irq > 0) { irq_set_status_flags(irq, IRQ_NOAUTOEN); ret = devm_request_threaded_irq(qcom->dev, irq, NULL, @@ -371,11 +406,14 @@ static int dwc3_qcom_clk_init(struct dwc3_qcom *qcom, int count) struct device_node *np = dev->of_node; int i; - qcom->num_clocks = count; - - if (!count) + if (!np || !count) return 0; + if (count < 0) + return count; + + qcom->num_clocks = count; + qcom->clks = devm_kcalloc(dev, qcom->num_clocks, sizeof(struct clk *), GFP_KERNEL); if (!qcom->clks) @@ -409,12 +447,115 @@ static int dwc3_qcom_clk_init(struct dwc3_qcom *qcom, int count) return 0; } -static int dwc3_qcom_probe(struct platform_device *pdev) +static const struct property_entry dwc3_qcom_acpi_properties[] = { + PROPERTY_ENTRY_STRING("dr_mode", "host"), + {} +}; + +static int dwc3_qcom_acpi_register_core(struct platform_device *pdev) +{ + struct dwc3_qcom *qcom = platform_get_drvdata(pdev); + struct device *dev = &pdev->dev; + struct resource *res, *child_res = NULL; + int irq; + int ret; + + qcom->dwc3 = platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO); + if (!qcom->dwc3) + return -ENOMEM; + + qcom->dwc3->dev.parent = dev; + qcom->dwc3->dev.type = dev->type; + qcom->dwc3->dev.dma_mask = dev->dma_mask; + qcom->dwc3->dev.dma_parms = dev->dma_parms; + qcom->dwc3->dev.coherent_dma_mask = dev->coherent_dma_mask; + + child_res = kcalloc(2, sizeof(*child_res), GFP_KERNEL); + if (!child_res) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "failed to get memory resource\n"); + ret = -ENODEV; + goto out; + } + + child_res[0].flags = res->flags; + child_res[0].start = res->start; + child_res[0].end = child_res[0].start + + qcom->acpi_pdata->dwc3_core_base_size; + + irq = platform_get_irq(pdev, 0); + child_res[1].flags = IORESOURCE_IRQ; + child_res[1].start = child_res[1].end = irq; + + ret = platform_device_add_resources(qcom->dwc3, child_res, 2); + if (ret) { + dev_err(&pdev->dev, "failed to add resources\n"); + goto out; + } + + ret = platform_device_add_properties(qcom->dwc3, + dwc3_qcom_acpi_properties); + if (ret < 0) { + dev_err(&pdev->dev, "failed to add properties\n"); + goto out; + } + + ret = platform_device_add(qcom->dwc3); + if (ret) + dev_err(&pdev->dev, "failed to add device\n"); + +out: + kfree(child_res); + return ret; +} + +static int dwc3_qcom_of_register_core(struct platform_device *pdev) { + struct dwc3_qcom *qcom = platform_get_drvdata(pdev); struct device_node *np = pdev->dev.of_node, *dwc3_np; struct device *dev = &pdev->dev; + int ret; + + dwc3_np = of_get_child_by_name(np, "dwc3"); + if (!dwc3_np) { + dev_err(dev, "failed to find dwc3 core child\n"); + return -ENODEV; + } + + ret = of_platform_populate(np, NULL, NULL, dev); + if (ret) { + dev_err(dev, "failed to register dwc3 core - %d\n", ret); + return ret; + } + + qcom->dwc3 = of_find_device_by_node(dwc3_np); + if (!qcom->dwc3) { + dev_err(dev, "failed to get dwc3 platform device\n"); + return -ENODEV; + } + + return 0; +} + +static const struct dwc3_acpi_pdata sdm845_acpi_pdata = { + .qscratch_base_offset = SDM845_QSCRATCH_BASE_OFFSET, + .qscratch_base_size = SDM845_QSCRATCH_SIZE, + .dwc3_core_base_size = SDM845_DWC3_CORE_SIZE, + .hs_phy_irq_index = 1, + .dp_hs_phy_irq_index = 4, + .dm_hs_phy_irq_index = 3, + .ss_phy_irq_index = 2 +}; + +static int dwc3_qcom_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct device *dev = &pdev->dev; struct dwc3_qcom *qcom; - struct resource *res; + struct resource *res, *parent_res = NULL; int ret, i; bool ignore_pipe_clk; @@ -425,6 +566,14 @@ static int dwc3_qcom_probe(struct platform_device *pdev) platform_set_drvdata(pdev, qcom); qcom->dev = &pdev->dev; + if (has_acpi_companion(dev)) { + qcom->acpi_pdata = acpi_device_get_match_data(dev); + if (!qcom->acpi_pdata) { + dev_err(&pdev->dev, "no supporting ACPI device data\n"); + return -EINVAL; + } + } + qcom->resets = devm_reset_control_array_get_optional_exclusive(dev); if (IS_ERR(qcom->resets)) { ret = PTR_ERR(qcom->resets); @@ -446,15 +595,28 @@ static int dwc3_qcom_probe(struct platform_device *pdev) goto reset_assert; } - ret = dwc3_qcom_clk_init(qcom, of_count_phandle_with_args(np, - "clocks", "#clock-cells")); + ret = dwc3_qcom_clk_init(qcom, of_clk_get_parent_count(np)); if (ret) { dev_err(dev, "failed to get clocks\n"); goto reset_assert; } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - qcom->qscratch_base = devm_ioremap_resource(dev, res); + + if (np) { + parent_res = res; + } else { + parent_res = kmemdup(res, sizeof(struct resource), GFP_KERNEL); + if (!parent_res) + return -ENOMEM; + + parent_res->start = res->start + + qcom->acpi_pdata->qscratch_base_offset; + parent_res->end = parent_res->start + + qcom->acpi_pdata->qscratch_base_size; + } + + qcom->qscratch_base = devm_ioremap_resource(dev, parent_res); if (IS_ERR(qcom->qscratch_base)) { dev_err(dev, "failed to map qscratch, err=%d\n", ret); ret = PTR_ERR(qcom->qscratch_base); @@ -462,13 +624,8 @@ static int dwc3_qcom_probe(struct platform_device *pdev) } ret = dwc3_qcom_setup_irq(pdev); - if (ret) - goto clk_disable; - - dwc3_np = of_get_child_by_name(np, "dwc3"); - if (!dwc3_np) { - dev_err(dev, "failed to find dwc3 core child\n"); - ret = -ENODEV; + if (ret) { + dev_err(dev, "failed to setup IRQs, err=%d\n", ret); goto clk_disable; } @@ -481,16 +638,13 @@ static int dwc3_qcom_probe(struct platform_device *pdev) if (ignore_pipe_clk) dwc3_qcom_select_utmi_clk(qcom); - ret = of_platform_populate(np, NULL, NULL, dev); - if (ret) { - dev_err(dev, "failed to register dwc3 core - %d\n", ret); - goto clk_disable; - } + if (np) + ret = dwc3_qcom_of_register_core(pdev); + else + ret = dwc3_qcom_acpi_register_core(pdev); - qcom->dwc3 = of_find_device_by_node(dwc3_np); - if (!qcom->dwc3) { - dev_err(&pdev->dev, "failed to get dwc3 platform device\n"); - ret = -ENODEV; + if (ret) { + dev_err(dev, "failed to register DWC3 Core, err=%d\n", ret); goto depopulate; } @@ -514,7 +668,10 @@ static int dwc3_qcom_probe(struct platform_device *pdev) return 0; depopulate: - of_platform_depopulate(&pdev->dev); + if (np) + of_platform_depopulate(&pdev->dev); + else + platform_device_put(pdev); clk_disable: for (i = qcom->num_clocks - 1; i >= 0; i--) { clk_disable_unprepare(qcom->clks[i]); @@ -601,6 +758,12 @@ static const struct of_device_id dwc3_qcom_of_match[] = { }; MODULE_DEVICE_TABLE(of, dwc3_qcom_of_match); +static const struct acpi_device_id dwc3_qcom_acpi_match[] = { + { "QCOM2430", (unsigned long)&sdm845_acpi_pdata }, + { }, +}; +MODULE_DEVICE_TABLE(acpi, dwc3_qcom_acpi_match); + static struct platform_driver dwc3_qcom_driver = { .probe = dwc3_qcom_probe, .remove = dwc3_qcom_remove, @@ -608,6 +771,7 @@ static struct platform_driver dwc3_qcom_driver = { .name = "dwc3-qcom", .pm = &dwc3_qcom_dev_pm_ops, .of_match_table = dwc3_qcom_of_match, + .acpi_match_table = ACPI_PTR(dwc3_qcom_acpi_match), }, }; diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 8efde178eef4..3996b9c4ff8d 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -379,6 +379,8 @@ static int dwc3_ep0_handle_u1(struct dwc3 *dwc, enum usb_device_state state, if ((dwc->speed != DWC3_DSTS_SUPERSPEED) && (dwc->speed != DWC3_DSTS_SUPERSPEED_PLUS)) return -EINVAL; + if (set && dwc->dis_u1_entry_quirk) + return -EINVAL; reg = dwc3_readl(dwc->regs, DWC3_DCTL); if (set) @@ -401,6 +403,8 @@ static int dwc3_ep0_handle_u2(struct dwc3 *dwc, enum usb_device_state state, if ((dwc->speed != DWC3_DSTS_SUPERSPEED) && (dwc->speed != DWC3_DSTS_SUPERSPEED_PLUS)) return -EINVAL; + if (set && dwc->dis_u2_entry_quirk) + return -EINVAL; reg = dwc3_readl(dwc->regs, DWC3_DCTL); if (set) @@ -626,7 +630,10 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) * nothing is pending from application. */ reg = dwc3_readl(dwc->regs, DWC3_DCTL); - reg |= (DWC3_DCTL_ACCEPTU1ENA | DWC3_DCTL_ACCEPTU2ENA); + if (!dwc->dis_u1_entry_quirk) + reg |= DWC3_DCTL_ACCEPTU1ENA; + if (!dwc->dis_u2_entry_quirk) + reg |= DWC3_DCTL_ACCEPTU2ENA; dwc3_writel(dwc->regs, DWC3_DCTL, reg); } break; diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index d67655384eb2..173f5329d3d9 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2073,6 +2073,25 @@ out: return 0; } +static void dwc3_gadget_config_params(struct usb_gadget *g, + struct usb_dcd_config_params *params) +{ + struct dwc3 *dwc = gadget_to_dwc(g); + + /* U1 Device exit Latency */ + if (dwc->dis_u1_entry_quirk) + params->bU1devExitLat = 0; + else + params->bU1devExitLat = DWC3_DEFAULT_U1_DEV_EXIT_LAT; + + /* U2 Device exit Latency */ + if (dwc->dis_u2_entry_quirk) + params->bU2DevExitLat = 0; + else + params->bU2DevExitLat = + cpu_to_le16(DWC3_DEFAULT_U2_DEV_EXIT_LAT); +} + static void dwc3_gadget_set_speed(struct usb_gadget *g, enum usb_device_speed speed) { @@ -2142,6 +2161,7 @@ static const struct usb_gadget_ops dwc3_gadget_ops = { .udc_start = dwc3_gadget_start, .udc_stop = dwc3_gadget_stop, .udc_set_speed = dwc3_gadget_set_speed, + .get_config_params = dwc3_gadget_config_params, }; /* -------------------------------------------------------------------------- */ @@ -2251,8 +2271,6 @@ static int dwc3_gadget_init_endpoint(struct dwc3 *dwc, u8 epnum) dep->endpoint.comp_desc = NULL; } - spin_lock_init(&dep->lock); - if (num == 0) ret = dwc3_gadget_init_control_endpoint(dep); else if (direction) diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h index 3ed738e86ea7..5faf4d1249e0 100644 --- a/drivers/usb/dwc3/gadget.h +++ b/drivers/usb/dwc3/gadget.h @@ -48,6 +48,12 @@ struct dwc3; /* DEPXFERCFG parameter 0 */ #define DWC3_DEPXFERCFG_NUM_XFER_RES(n) ((n) & 0xffff) +/* U1 Device exit Latency */ +#define DWC3_DEFAULT_U1_DEV_EXIT_LAT 0x0A /* Less then 10 microsec */ + +/* U2 Device exit Latency */ +#define DWC3_DEFAULT_U2_DEV_EXIT_LAT 0x1FF /* Less then 511 microsec */ + /* -------------------------------------------------------------------------- */ #define to_dwc3_request(r) (container_of(r, struct dwc3_request, request)) diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index ec189d7855a0..02ff850278b1 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -228,7 +228,7 @@ config USB_CONFIGFS specified simply by creating appropriate directories in configfs. Associating functions with configurations is done by creating appropriate symbolic links. - For more information see Documentation/usb/gadget_configfs.txt. + For more information see Documentation/usb/gadget_configfs.rst. config USB_CONFIGFS_SERIAL bool "Generic serial bulk in/out" @@ -441,7 +441,7 @@ config USB_CONFIGFS_F_HID The HID function driver provides generic emulation of USB Human Interface Devices (HID). - For more information, see Documentation/usb/gadget_hid.txt. + For more information, see Documentation/usb/gadget_hid.rst. config USB_CONFIGFS_F_UVC bool "USB Webcam function" @@ -466,7 +466,7 @@ config USB_CONFIGFS_F_PRINTER receive or send printer data. It can use ioctl calls to the device file to get or set printer status. - For more information, see Documentation/usb/gadget_printer.txt + For more information, see Documentation/usb/gadget_printer.rst which includes sample code for accessing the device file. config USB_CONFIGFS_F_TCM diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index b8a15840b4ff..9118b42c70b6 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -653,7 +653,7 @@ static int bos_desc(struct usb_composite_dev *cdev) /* Get Controller configuration */ if (cdev->gadget->ops->get_config_params) { - cdev->gadget->ops->get_config_params( + cdev->gadget->ops->get_config_params(cdev->gadget, &dcd_config_params); } else { dcd_config_params.bU1devExitLat = diff --git a/drivers/usb/gadget/function/f_eem.c b/drivers/usb/gadget/function/f_eem.c index c13befa31110..b81a91d504bd 100644 --- a/drivers/usb/gadget/function/f_eem.c +++ b/drivers/usb/gadget/function/f_eem.c @@ -166,7 +166,6 @@ static struct usb_gadget_strings *eem_strings[] = { static int eem_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl) { struct usb_composite_dev *cdev = f->config->cdev; - int value = -EOPNOTSUPP; u16 w_index = le16_to_cpu(ctrl->wIndex); u16 w_value = le16_to_cpu(ctrl->wValue); u16 w_length = le16_to_cpu(ctrl->wLength); @@ -176,7 +175,7 @@ static int eem_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl) w_value, w_index, w_length); /* device either stalls (value < 0) or reports success */ - return value; + return -EOPNOTSUPP; } diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index 47be961f1bf3..213ff03c8a9f 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -997,7 +997,6 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data) * earlier */ gadget = epfile->ffs->gadget; - io_data->use_sg = gadget->sg_supported && data_len > PAGE_SIZE; spin_lock_irq(&epfile->ffs->eps_lock); /* In the meantime, endpoint got disabled or changed. */ @@ -1012,6 +1011,8 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data) */ if (io_data->read) data_len = usb_ep_align_maybe(gadget, ep->ep, data_len); + + io_data->use_sg = gadget->sg_supported && data_len > PAGE_SIZE; spin_unlock_irq(&epfile->ffs->eps_lock); data = ffs_alloc_buffer(io_data, data_len); @@ -1182,11 +1183,12 @@ static ssize_t ffs_epfile_write_iter(struct kiocb *kiocb, struct iov_iter *from) ENTER(); if (!is_sync_kiocb(kiocb)) { - p = kmalloc(sizeof(io_data), GFP_KERNEL); + p = kzalloc(sizeof(io_data), GFP_KERNEL); if (unlikely(!p)) return -ENOMEM; p->aio = true; } else { + memset(p, 0, sizeof(*p)); p->aio = false; } @@ -1218,11 +1220,12 @@ static ssize_t ffs_epfile_read_iter(struct kiocb *kiocb, struct iov_iter *to) ENTER(); if (!is_sync_kiocb(kiocb)) { - p = kmalloc(sizeof(io_data), GFP_KERNEL); + p = kzalloc(sizeof(io_data), GFP_KERNEL); if (unlikely(!p)) return -ENOMEM; p->aio = true; } else { + memset(p, 0, sizeof(*p)); p->aio = false; } diff --git a/drivers/usb/gadget/function/f_mass_storage.c b/drivers/usb/gadget/function/f_mass_storage.c index 043f97ad8f22..29cc5693e05c 100644 --- a/drivers/usb/gadget/function/f_mass_storage.c +++ b/drivers/usb/gadget/function/f_mass_storage.c @@ -47,7 +47,7 @@ * * For more information about MSF and in particular its module * parameters and sysfs interface read the - * <Documentation/usb/mass-storage.txt> file. + * <Documentation/usb/mass-storage.rst> file. */ /* diff --git a/drivers/usb/gadget/function/u_audio.c b/drivers/usb/gadget/function/u_audio.c index fb5ed97572e5..56906d15fb55 100644 --- a/drivers/usb/gadget/function/u_audio.c +++ b/drivers/usb/gadget/function/u_audio.c @@ -40,7 +40,7 @@ struct uac_rtd_params { void *rbuf; - unsigned max_psize; /* MaxPacketSize of endpoint */ + unsigned int max_psize; /* MaxPacketSize of endpoint */ struct uac_req *ureq; spinlock_t lock; @@ -78,7 +78,7 @@ static const struct snd_pcm_hardware uac_pcm_hardware = { static void u_audio_iso_complete(struct usb_ep *ep, struct usb_request *req) { - unsigned pending; + unsigned int pending; unsigned long flags, flags2; unsigned int hw_ptr; int status = req->status; diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c index 737bd77a575d..fbe96ef1ac7a 100644 --- a/drivers/usb/gadget/function/u_ether.c +++ b/drivers/usb/gadget/function/u_ether.c @@ -186,11 +186,12 @@ rx_submit(struct eth_dev *dev, struct usb_request *req, gfp_t gfp_flags) out = dev->port_usb->out_ep; else out = NULL; - spin_unlock_irqrestore(&dev->lock, flags); if (!out) + { + spin_unlock_irqrestore(&dev->lock, flags); return -ENOTCONN; - + } /* Padding up to RX_EXTRA handles minor disagreements with host. * Normally we use the USB "terminate on short read" convention; @@ -214,6 +215,7 @@ rx_submit(struct eth_dev *dev, struct usb_request *req, gfp_t gfp_flags) if (dev->port_usb->is_fixed) size = max_t(size_t, size, dev->port_usb->fixed_out_len); + spin_unlock_irqrestore(&dev->lock, flags); skb = __netdev_alloc_skb(dev->net, size + NET_IP_ALIGN, gfp_flags); if (skb == NULL) { @@ -1004,9 +1006,9 @@ int gether_get_ifname(struct net_device *net, char *name, int len) int ret; rtnl_lock(); - ret = snprintf(name, len, "%s\n", netdev_name(net)); + ret = scnprintf(name, len, "%s\n", netdev_name(net)); rtnl_unlock(); - return ret < len ? ret : len; + return ret; } EXPORT_SYMBOL_GPL(gether_get_ifname); diff --git a/drivers/usb/gadget/legacy/Kconfig b/drivers/usb/gadget/legacy/Kconfig index d7c9e4fca895..69ff7f8c86f5 100644 --- a/drivers/usb/gadget/legacy/Kconfig +++ b/drivers/usb/gadget/legacy/Kconfig @@ -153,7 +153,6 @@ config USB_ETH_EEM depends on USB_ETH select USB_LIBCOMPOSITE select USB_F_EEM - default n help CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM and therefore can be supported by more hardware. Technically ECM and @@ -288,7 +287,7 @@ config USB_G_SERIAL Say "y" to link the driver statically, or "m" to build a dynamically linked module called "g_serial". - For more information, see Documentation/usb/gadget_serial.txt + For more information, see Documentation/usb/gadget_serial.rst which includes instructions and a "driver info file" needed to make MS-Windows work with CDC ACM. @@ -322,7 +321,7 @@ config USB_G_PRINTER Say "y" to link the driver statically, or "m" to build a dynamically linked module called "g_printer". - For more information, see Documentation/usb/gadget_printer.txt + For more information, see Documentation/usb/gadget_printer.rst which includes sample code for accessing the device file. if TTY @@ -419,7 +418,6 @@ config USB_G_MULTI_RNDIS config USB_G_MULTI_CDC bool "CDC Ethernet + CDC Serial + Storage configuration" depends on USB_G_MULTI - default n select USB_F_ECM help This option enables a configuration with CDC Ethernet (ECM), CDC @@ -438,7 +436,7 @@ config USB_G_HID The HID gadget driver provides generic emulation of USB Human Interface Devices (HID). - For more information, see Documentation/usb/gadget_hid.txt which + For more information, see Documentation/usb/gadget_hid.rst which includes sample code for accessing the device files. Say "y" to link the driver statically, or "m" to build a diff --git a/drivers/usb/gadget/udc/at91_udc.c b/drivers/usb/gadget/udc/at91_udc.c index 03959dc86cfd..194ffb1ed462 100644 --- a/drivers/usb/gadget/udc/at91_udc.c +++ b/drivers/usb/gadget/udc/at91_udc.c @@ -799,7 +799,6 @@ static int at91_wakeup(struct usb_gadget *gadget) { struct at91_udc *udc = to_udc(gadget); u32 glbstate; - int status = -EINVAL; unsigned long flags; DBG("%s\n", __func__ ); @@ -818,7 +817,7 @@ static int at91_wakeup(struct usb_gadget *gadget) done: spin_unlock_irqrestore(&udc->lock, flags); - return status; + return 0; } /* reinit == restore initial software state */ diff --git a/drivers/usb/gadget/udc/fotg210-udc.c b/drivers/usb/gadget/udc/fotg210-udc.c index cec49294bac6..21f3e6c4e4d6 100644 --- a/drivers/usb/gadget/udc/fotg210-udc.c +++ b/drivers/usb/gadget/udc/fotg210-udc.c @@ -481,7 +481,6 @@ static int fotg210_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedge) struct fotg210_ep *ep; struct fotg210_udc *fotg210; unsigned long flags; - int ret = 0; ep = container_of(_ep, struct fotg210_ep, ep); @@ -504,7 +503,7 @@ static int fotg210_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedge) } spin_unlock_irqrestore(&ep->fotg210->lock, flags); - return ret; + return 0; } static int fotg210_ep_set_halt(struct usb_ep *_ep, int value) diff --git a/drivers/usb/gadget/udc/net2272.c b/drivers/usb/gadget/udc/net2272.c index 564aeee1a1fe..247de0faaeb7 100644 --- a/drivers/usb/gadget/udc/net2272.c +++ b/drivers/usb/gadget/udc/net2272.c @@ -1178,11 +1178,6 @@ registers_show(struct device *_dev, struct device_attribute *attr, char *buf) size = PAGE_SIZE; spin_lock_irqsave(&dev->lock, flags); - if (dev->driver) - s = dev->driver->driver.name; - else - s = "(none)"; - /* Main Control Registers */ t = scnprintf(next, size, "%s version %s," "chiprev %02x, locctl %02x\n" diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c index fcf13ef33b31..f36f0730afab 100644 --- a/drivers/usb/gadget/udc/omap_udc.c +++ b/drivers/usb/gadget/udc/omap_udc.c @@ -2103,7 +2103,6 @@ done: static int omap_udc_stop(struct usb_gadget *g) { unsigned long flags; - int status = -ENODEV; if (udc->dc_clk != NULL) omap_udc_enable_clock(1); @@ -2125,7 +2124,7 @@ static int omap_udc_stop(struct usb_gadget *g) if (udc->dc_clk != NULL) omap_udc_enable_clock(0); - return status; + return 0; } /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c index 7dc248546fd4..87062d22134d 100644 --- a/drivers/usb/gadget/udc/renesas_usb3.c +++ b/drivers/usb/gadget/udc/renesas_usb3.c @@ -351,6 +351,8 @@ struct renesas_usb3 { int disabled_count; struct usb_request *ep0_req; + + enum usb_role connection_state; u16 test_mode; u8 ep0_buf[USB3_EP0_BUF_SIZE]; bool softconnect; @@ -359,6 +361,7 @@ struct renesas_usb3 { bool extcon_usb; /* check vbus and set EXTCON_USB */ bool forced_b_device; bool start_to_connect; + bool role_sw_by_connector; }; #define gadget_to_renesas_usb3(_gadget) \ @@ -699,8 +702,11 @@ static void usb3_mode_config(struct renesas_usb3 *usb3, bool host, bool a_dev) unsigned long flags; spin_lock_irqsave(&usb3->lock, flags); - usb3_set_mode_by_role_sw(usb3, host); - usb3_vbus_out(usb3, a_dev); + if (!usb3->role_sw_by_connector || + usb3->connection_state != USB_ROLE_NONE) { + usb3_set_mode_by_role_sw(usb3, host); + usb3_vbus_out(usb3, a_dev); + } /* for A-Peripheral or forced B-device mode */ if ((!host && a_dev) || usb3->start_to_connect) usb3_connect(usb3); @@ -716,7 +722,8 @@ static void usb3_check_id(struct renesas_usb3 *usb3) { usb3->extcon_host = usb3_is_a_device(usb3); - if (usb3->extcon_host && !usb3->forced_b_device) + if ((!usb3->role_sw_by_connector && usb3->extcon_host && + !usb3->forced_b_device) || usb3->connection_state == USB_ROLE_HOST) usb3_mode_config(usb3, true, true); else usb3_mode_config(usb3, false, false); @@ -1161,7 +1168,7 @@ static void usb3_set_status_stage(struct renesas_usb3_ep *usb3_ep, static void usb3_p0_xfer(struct renesas_usb3_ep *usb3_ep, struct renesas_usb3_request *usb3_req) { - int ret = -EAGAIN; + int ret; if (usb3_ep->dir_in) ret = usb3_write_pipe(usb3_ep, usb3_req, USB3_P0_WRITE); @@ -2343,14 +2350,65 @@ static enum usb_role renesas_usb3_role_switch_get(struct device *dev) return cur_role; } -static int renesas_usb3_role_switch_set(struct device *dev, - enum usb_role role) +static void handle_ext_role_switch_states(struct device *dev, + enum usb_role role) +{ + struct renesas_usb3 *usb3 = dev_get_drvdata(dev); + struct device *host = usb3->host_dev; + enum usb_role cur_role = renesas_usb3_role_switch_get(dev); + + switch (role) { + case USB_ROLE_NONE: + usb3->connection_state = USB_ROLE_NONE; + if (usb3->driver) + usb3_disconnect(usb3); + usb3_vbus_out(usb3, false); + break; + case USB_ROLE_DEVICE: + if (usb3->connection_state == USB_ROLE_NONE) { + usb3->connection_state = USB_ROLE_DEVICE; + usb3_set_mode(usb3, false); + if (usb3->driver) + usb3_connect(usb3); + } else if (cur_role == USB_ROLE_HOST) { + device_release_driver(host); + usb3_set_mode(usb3, false); + if (usb3->driver) + usb3_connect(usb3); + } + usb3_vbus_out(usb3, false); + break; + case USB_ROLE_HOST: + if (usb3->connection_state == USB_ROLE_NONE) { + if (usb3->driver) + usb3_disconnect(usb3); + + usb3->connection_state = USB_ROLE_HOST; + usb3_set_mode(usb3, true); + usb3_vbus_out(usb3, true); + if (device_attach(host) < 0) + dev_err(dev, "device_attach(host) failed\n"); + } else if (cur_role == USB_ROLE_DEVICE) { + usb3_disconnect(usb3); + /* Must set the mode before device_attach of the host */ + usb3_set_mode(usb3, true); + /* This device_attach() might sleep */ + if (device_attach(host) < 0) + dev_err(dev, "device_attach(host) failed\n"); + } + break; + default: + break; + } +} + +static void handle_role_switch_states(struct device *dev, + enum usb_role role) { struct renesas_usb3 *usb3 = dev_get_drvdata(dev); struct device *host = usb3->host_dev; enum usb_role cur_role = renesas_usb3_role_switch_get(dev); - pm_runtime_get_sync(dev); if (cur_role == USB_ROLE_HOST && role == USB_ROLE_DEVICE) { device_release_driver(host); usb3_set_mode(usb3, false); @@ -2361,6 +2419,20 @@ static int renesas_usb3_role_switch_set(struct device *dev, if (device_attach(host) < 0) dev_err(dev, "device_attach(host) failed\n"); } +} + +static int renesas_usb3_role_switch_set(struct device *dev, + enum usb_role role) +{ + struct renesas_usb3 *usb3 = dev_get_drvdata(dev); + + pm_runtime_get_sync(dev); + + if (usb3->role_sw_by_connector) + handle_ext_role_switch_states(dev, role); + else + handle_role_switch_states(dev, role); + pm_runtime_put(dev); return 0; @@ -2650,7 +2722,7 @@ static const unsigned int renesas_usb3_cable[] = { EXTCON_NONE, }; -static const struct usb_role_switch_desc renesas_usb3_role_switch_desc = { +static struct usb_role_switch_desc renesas_usb3_role_switch_desc = { .set = renesas_usb3_role_switch_set, .get = renesas_usb3_role_switch_get, .allow_userspace_control = true, @@ -2741,6 +2813,11 @@ static int renesas_usb3_probe(struct platform_device *pdev) if (ret < 0) goto err_dev_create; + if (device_property_read_bool(&pdev->dev, "usb-role-switch")) { + usb3->role_sw_by_connector = true; + renesas_usb3_role_switch_desc.fwnode = dev_fwnode(&pdev->dev); + } + INIT_WORK(&usb3->role_work, renesas_usb3_role_work); usb3->role_sw = usb_role_switch_register(&pdev->dev, &renesas_usb3_role_switch_desc); diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index d809671c5fea..40b5de597112 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -114,7 +114,7 @@ config USB_EHCI_HCD Controller Driver or UHCI (for Via motherboards) Host Controller Driver too. - You may want to read <file:Documentation/usb/ehci.txt>. + You may want to read <file:Documentation/usb/ehci.rst>. To compile this driver as a module, choose M here: the module will be called ehci-hcd. @@ -161,7 +161,6 @@ config USB_EHCI_PCI config USB_EHCI_HCD_PMC_MSP tristate "EHCI support for on-chip PMC MSP71xx USB controller" depends on MSP_HAS_USB - default n select USB_EHCI_BIG_ENDIAN_DESC select USB_EHCI_BIG_ENDIAN_MMIO ---help--- @@ -308,7 +307,6 @@ config USB_CNS3XXX_EHCI config USB_EHCI_HCD_PLATFORM tristate "Generic EHCI driver for a platform device" - default n ---help--- Adds an EHCI host driver for a generic platform device, which provides a memory space and an irq. @@ -318,7 +316,6 @@ config USB_EHCI_HCD_PLATFORM config USB_OCTEON_EHCI bool "Octeon on-chip EHCI support (DEPRECATED)" depends on CAVIUM_OCTEON_SOC - default n select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN select USB_EHCI_HCD_PLATFORM help @@ -526,7 +523,6 @@ config USB_OHCI_HCD_SSB depends on (SSB = y || SSB = USB_OHCI_HCD) select USB_HCD_SSB select USB_OHCI_HCD_PLATFORM - default n ---help--- This option is deprecated now and the driver was removed, use USB_HCD_SSB and USB_OHCI_HCD_PLATFORM instead. @@ -569,7 +565,6 @@ config USB_CNS3XXX_OHCI config USB_OHCI_HCD_PLATFORM tristate "Generic OHCI driver for a platform device" - default n ---help--- Adds an OHCI host driver for a generic platform device, which provides a memory space and an irq. diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c index 8e3bab1e0c1f..3a29a1a8519c 100644 --- a/drivers/usb/host/ehci-exynos.c +++ b/drivers/usb/host/ehci-exynos.c @@ -39,6 +39,7 @@ static struct hc_driver __read_mostly exynos_ehci_hc_driver; struct exynos_ehci_hcd { struct clk *clk; + struct device_node *of_node; struct phy *phy[PHY_NUMBER]; }; @@ -203,6 +204,13 @@ static int exynos_ehci_probe(struct platform_device *pdev) ehci = hcd_to_ehci(hcd); ehci->caps = hcd->regs; + /* + * Workaround: reset of_node pointer to avoid conflict between Exynos + * EHCI port subnodes and generic USB device bindings + */ + exynos_ehci->of_node = pdev->dev.of_node; + pdev->dev.of_node = NULL; + /* DMA burst Enable */ writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs)); @@ -219,6 +227,7 @@ static int exynos_ehci_probe(struct platform_device *pdev) fail_add_hcd: exynos_ehci_phy_disable(&pdev->dev); + pdev->dev.of_node = exynos_ehci->of_node; fail_io: clk_disable_unprepare(exynos_ehci->clk); fail_clk: @@ -231,6 +240,8 @@ static int exynos_ehci_remove(struct platform_device *pdev) struct usb_hcd *hcd = platform_get_drvdata(pdev); struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd); + pdev->dev.of_node = exynos_ehci->of_node; + usb_remove_hcd(hcd); exynos_ehci_phy_disable(&pdev->dev); diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index e3d0c1c25160..9e9c232e896f 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -122,6 +122,12 @@ static int fsl_ehci_drv_probe(struct platform_device *pdev) tmp |= 0x4; iowrite32be(tmp, hcd->regs + FSL_SOC_USB_CTRL); } + + /* Set USB_EN bit to select ULPI phy for USB controller version 2.5 */ + if (pdata->controller_ver == FSL_USB_VER_2_5 && + pdata->phy_mode == FSL_USB2_PHY_ULPI) + iowrite32be(USB_CTRL_USB_EN, hcd->regs + FSL_SOC_USB_CTRL); + /* * Enable UTMI phy and program PTS field in UTMI mode before asserting * controller reset for USB Controller version 2.5 @@ -177,6 +183,17 @@ static int fsl_ehci_drv_probe(struct platform_device *pdev) return retval; } +static bool usb_phy_clk_valid(struct usb_hcd *hcd) +{ + void __iomem *non_ehci = hcd->regs; + bool ret = true; + + if (!(ioread32be(non_ehci + FSL_SOC_USB_CTRL) & PHY_CLK_VALID)) + ret = false; + + return ret; +} + static int ehci_fsl_setup_phy(struct usb_hcd *hcd, enum fsl_usb2_phy_modes phy_mode, unsigned int port_offset) @@ -219,7 +236,26 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd, portsc |= PORT_PTS_PTW; /* fall through */ case FSL_USB2_PHY_UTMI: + /* Presence of this node "has_fsl_erratum_a006918" + * in device-tree is used to stop USB controller + * initialization in Linux + */ + if (pdata->has_fsl_erratum_a006918) { + dev_warn(dev, "USB PHY clock invalid\n"); + return -EINVAL; + } + /* fall through */ case FSL_USB2_PHY_UTMI_DUAL: + /* PHY_CLK_VALID bit is de-featured from all controller + * versions below 2.4 and is to be checked only for + * internal UTMI phy + */ + if (pdata->controller_ver > FSL_USB_VER_2_4 && + pdata->have_sysif_regs && !usb_phy_clk_valid(hcd)) { + dev_err(dev, "USB PHY clock invalid\n"); + return -EINVAL; + } + if (pdata->have_sysif_regs && pdata->controller_ver) { /* controller version 1.6 or above */ tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL); @@ -243,17 +279,11 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd, break; } - /* - * check PHY_CLK_VALID to determine phy clock presence before writing - * to portsc - */ - if (pdata->check_phy_clk_valid) { - if (!(ioread32be(non_ehci + FSL_SOC_USB_CTRL) & - PHY_CLK_VALID)) { - dev_warn(hcd->self.controller, - "USB PHY clock invalid\n"); - return -EINVAL; - } + if (pdata->have_sysif_regs && + pdata->controller_ver > FSL_USB_VER_1_6 && + !usb_phy_clk_valid(hcd)) { + dev_warn(hcd->self.controller, "USB PHY clock invalid\n"); + return -EINVAL; } ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]); diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h index cbc422032e50..9d18c6e6ab27 100644 --- a/drivers/usb/host/ehci-fsl.h +++ b/drivers/usb/host/ehci-fsl.h @@ -50,4 +50,7 @@ #define UTMI_PHY_EN (1<<9) #define ULPI_PHY_CLK_SEL (1<<10) #define PHY_CLK_VALID (1<<17) + +/* Retry count for checking UTMI PHY CLK validity */ +#define UTMI_PHY_CLK_VALID_CHK_RETRY 5 #endif /* _EHCI_FSL_H */ diff --git a/drivers/usb/host/ehci-st.c b/drivers/usb/host/ehci-st.c index dc42981047c9..ccb4e611001d 100644 --- a/drivers/usb/host/ehci-st.c +++ b/drivers/usb/host/ehci-st.c @@ -152,7 +152,6 @@ static int st_ehci_platform_probe(struct platform_device *dev) struct resource *res_mem; struct usb_ehci_pdata *pdata = &ehci_platform_defaults; struct st_ehci_platform_priv *priv; - struct ehci_hcd *ehci; int err, irq, clk = 0; if (usb_disabled()) @@ -177,7 +176,6 @@ static int st_ehci_platform_probe(struct platform_device *dev) platform_set_drvdata(dev, hcd); dev->dev.platform_data = pdata; priv = hcd_to_ehci_priv(hcd); - ehci = hcd_to_ehci(hcd); priv->phy = devm_phy_get(&dev->dev, "usb"); if (IS_ERR(priv->phy)) { diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c index 0da68df259c8..e835a22b12af 100644 --- a/drivers/usb/host/fotg210-hcd.c +++ b/drivers/usb/host/fotg210-hcd.c @@ -10,6 +10,7 @@ * Most of code borrowed from the Linux-3.7 EHCI driver */ #include <linux/module.h> +#include <linux/of.h> #include <linux/device.h> #include <linux/dmapool.h> #include <linux/kernel.h> @@ -5669,9 +5670,18 @@ static int fotg210_hcd_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_OF +static const struct of_device_id fotg210_of_match[] = { + { .compatible = "faraday,fotg210" }, + {}, +}; +MODULE_DEVICE_TABLE(of, fotg210_of_match); +#endif + static struct platform_driver fotg210_hcd_driver = { .driver = { .name = "fotg210-hcd", + .of_match_table = of_match_ptr(fotg210_of_match), }, .probe = fotg210_hcd_probe, .remove = fotg210_hcd_remove, diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c index 4f8b8a08c914..ae8f60f6e6a5 100644 --- a/drivers/usb/host/fsl-mph-dr-of.c +++ b/drivers/usb/host/fsl-mph-dr-of.c @@ -224,12 +224,10 @@ static int fsl_usb2_mph_dr_of_probe(struct platform_device *ofdev) of_property_read_bool(np, "fsl,usb-erratum-a005275"); pdata->has_fsl_erratum_a005697 = of_property_read_bool(np, "fsl,usb_erratum-a005697"); - - if (of_get_property(np, "fsl,usb_erratum_14", NULL)) - pdata->has_fsl_erratum_14 = 1; - else - pdata->has_fsl_erratum_14 = 0; - + pdata->has_fsl_erratum_a006918 = + of_property_read_bool(np, "fsl,usb_erratum-a006918"); + pdata->has_fsl_erratum_14 = + of_property_read_bool(np, "fsl,usb_erratum-14"); /* * Determine whether phy_clk_valid needs to be checked diff --git a/drivers/usb/host/isp1362.h b/drivers/usb/host/isp1362.h index 650240846ee2..4c49688a069d 100644 --- a/drivers/usb/host/isp1362.h +++ b/drivers/usb/host/isp1362.h @@ -11,7 +11,7 @@ #define USE_32BIT 0 -/* These options are mutually eclusive */ +/* These options are mutually exclusive */ #define USE_PLATFORM_DELAY 0 #define USE_NDELAY 0 diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c index c0c4dcca6f3c..905c6317e0c3 100644 --- a/drivers/usb/host/ohci-exynos.c +++ b/drivers/usb/host/ohci-exynos.c @@ -30,6 +30,7 @@ static struct hc_driver __read_mostly exynos_ohci_hc_driver; struct exynos_ohci_hcd { struct clk *clk; + struct device_node *of_node; struct phy *phy[PHY_NUMBER]; }; @@ -170,6 +171,13 @@ static int exynos_ohci_probe(struct platform_device *pdev) goto fail_io; } + /* + * Workaround: reset of_node pointer to avoid conflict between Exynos + * OHCI port subnodes and generic USB device bindings + */ + exynos_ohci->of_node = pdev->dev.of_node; + pdev->dev.of_node = NULL; + err = usb_add_hcd(hcd, irq, IRQF_SHARED); if (err) { dev_err(&pdev->dev, "Failed to add USB HCD\n"); @@ -180,6 +188,7 @@ static int exynos_ohci_probe(struct platform_device *pdev) fail_add_hcd: exynos_ohci_phy_disable(&pdev->dev); + pdev->dev.of_node = exynos_ohci->of_node; fail_io: clk_disable_unprepare(exynos_ohci->clk); fail_clk: @@ -192,6 +201,8 @@ static int exynos_ohci_remove(struct platform_device *pdev) struct usb_hcd *hcd = platform_get_drvdata(pdev); struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd); + pdev->dev.of_node = exynos_ohci->of_node; + usb_remove_hcd(hcd); exynos_ohci_phy_disable(&pdev->dev); diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index fbcd34911025..a033f7d855e0 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -274,7 +274,7 @@ static const struct ohci_driver_overrides pci_overrides __initconst = { .reset = ohci_pci_reset, }; -static const struct pci_device_id pci_ids [] = { { +static const struct pci_device_id pci_ids[] = { { /* handle any USB OHCI controller */ PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_OHCI, ~0), .driver_data = (unsigned long) &ohci_pci_hc_driver, diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c index 4511e27e9da8..d961097c90f0 100644 --- a/drivers/usb/host/ohci-s3c2410.c +++ b/drivers/usb/host/ohci-s3c2410.c @@ -293,7 +293,6 @@ static int ohci_s3c2410_hub_control( static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc) { struct s3c2410_hcd_port *port; - struct usb_hcd *hcd; unsigned long flags; int portno; @@ -301,7 +300,6 @@ static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc) return; port = &info->port[0]; - hcd = info->hcd; local_irq_save(flags); diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c index 69fa04697793..5cc05449281c 100644 --- a/drivers/usb/host/ohci-spear.c +++ b/drivers/usb/host/ohci-spear.c @@ -35,7 +35,6 @@ static struct hc_driver __read_mostly ohci_spear_hc_driver; static int spear_ohci_hcd_drv_probe(struct platform_device *pdev) { const struct hc_driver *driver = &ohci_spear_hc_driver; - struct ohci_hcd *ohci; struct usb_hcd *hcd = NULL; struct clk *usbh_clk; struct spear_ohci *sohci_p; @@ -85,8 +84,6 @@ static int spear_ohci_hcd_drv_probe(struct platform_device *pdev) clk_prepare_enable(sohci_p->clk); - ohci = hcd_to_ohci(hcd); - retval = usb_add_hcd(hcd, platform_get_irq(pdev, 0), 0); if (retval == 0) { device_wakeup_enable(hcd->self.controller); diff --git a/drivers/usb/host/ohci-st.c b/drivers/usb/host/ohci-st.c index 992807c9850a..638a92bd2cdc 100644 --- a/drivers/usb/host/ohci-st.c +++ b/drivers/usb/host/ohci-st.c @@ -132,7 +132,6 @@ static int st_ohci_platform_probe(struct platform_device *dev) struct resource *res_mem; struct usb_ohci_pdata *pdata = &ohci_platform_defaults; struct st_ohci_platform_priv *priv; - struct ohci_hcd *ohci; int err, irq, clk = 0; if (usb_disabled()) @@ -158,7 +157,6 @@ static int st_ohci_platform_probe(struct platform_device *dev) platform_set_drvdata(dev, hcd); dev->dev.platform_data = pdata; priv = hcd_to_ohci_priv(hcd); - ohci = hcd_to_ohci(hcd); priv->phy = devm_phy_get(&dev->dev, "usb"); if (IS_ERR(priv->phy)) { diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c index 4a5c9b599c57..400c40bc43a6 100644 --- a/drivers/usb/host/u132-hcd.c +++ b/drivers/usb/host/u132-hcd.c @@ -2554,10 +2554,9 @@ static int u132_get_frame(struct usb_hcd *hcd) dev_err(&u132->platform_dev->dev, "device is being removed\n"); return -ESHUTDOWN; } else { - int frame = 0; dev_err(&u132->platform_dev->dev, "TODO: u132_get_frame\n"); mdelay(100); - return frame; + return 0; } } diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 121782e22c01..9741cdeea9d7 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -399,7 +399,7 @@ void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, * stream once the endpoint is on the HW schedule. */ if ((ep_state & EP_STOP_CMD_PENDING) || (ep_state & SET_DEQ_PENDING) || - (ep_state & EP_HALTED)) + (ep_state & EP_HALTED) || (ep_state & EP_CLEARING_TT)) return; writel(DB_VALUE(ep_index, stream_id), db_addr); /* The CPU has better things to do at this point than wait for a @@ -433,6 +433,13 @@ static void ring_doorbell_for_active_rings(struct xhci_hcd *xhci, } } +void xhci_ring_doorbell_for_active_rings(struct xhci_hcd *xhci, + unsigned int slot_id, + unsigned int ep_index) +{ + ring_doorbell_for_active_rings(xhci, slot_id, ep_index); +} + /* Get the right ring for the given slot_id, ep_index and stream_id. * If the endpoint supports streams, boundary check the URB's stream ID. * If the endpoint doesn't support streams, return the singular endpoint ring. @@ -1799,6 +1806,23 @@ struct xhci_segment *trb_in_td(struct xhci_hcd *xhci, return NULL; } +static void xhci_clear_hub_tt_buffer(struct xhci_hcd *xhci, struct xhci_td *td, + struct xhci_virt_ep *ep) +{ + /* + * As part of low/full-speed endpoint-halt processing + * we must clear the TT buffer (USB 2.0 specification 11.17.5). + */ + if (td->urb->dev->tt && !usb_pipeint(td->urb->pipe) && + (td->urb->dev->tt->hub != xhci_to_hcd(xhci)->self.root_hub) && + !(ep->ep_state & EP_CLEARING_TT)) { + ep->ep_state |= EP_CLEARING_TT; + td->urb->ep->hcpriv = td->urb->dev; + if (usb_hub_clear_tt_buffer(td->urb)) + ep->ep_state &= ~EP_CLEARING_TT; + } +} + static void xhci_cleanup_halted_endpoint(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index, unsigned int stream_id, struct xhci_td *td, @@ -1825,6 +1849,7 @@ static void xhci_cleanup_halted_endpoint(struct xhci_hcd *xhci, if (reset_type == EP_HARD_RESET) { ep->ep_state |= EP_HARD_CLEAR_TOGGLE; xhci_cleanup_stalled_ring(xhci, ep_index, stream_id, td); + xhci_clear_hub_tt_buffer(xhci, td, ep); } xhci_ring_cmd_db(xhci); } diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c index 294158113d62..dafc65911fc0 100644 --- a/drivers/usb/host/xhci-tegra.c +++ b/drivers/usb/host/xhci-tegra.c @@ -354,29 +354,6 @@ enum tegra_xusb_mbox_cmd { MBOX_CMD_NAK }; -static const char * const mbox_cmd_name[] = { - [ 1] = "MSG_ENABLE", - [ 2] = "INC_FALCON_CLOCK", - [ 3] = "DEC_FALCON_CLOCK", - [ 4] = "INC_SSPI_CLOCK", - [ 5] = "DEC_SSPI_CLOCK", - [ 6] = "SET_BW", - [ 7] = "SET_SS_PWR_GATING", - [ 8] = "SET_SS_PWR_UNGATING", - [ 9] = "SAVE_DFE_CTLE_CTX", - [ 10] = "AIRPLANE_MODE_ENABLED", - [ 11] = "AIRPLANE_MODE_DISABLED", - [ 12] = "START_HSIC_IDLE", - [ 13] = "STOP_HSIC_IDLE", - [ 14] = "DBC_WAKE_STACK", - [ 15] = "HSIC_PRETEND_CONNECT", - [ 16] = "RESET_SSPI", - [ 17] = "DISABLE_SS_LFPS_DETECTION", - [ 18] = "ENABLE_SS_LFPS_DETECTION", - [128] = "ACK", - [129] = "NAK", -}; - struct tegra_xusb_mbox_msg { u32 cmd; u32 data; diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 3f79f35d0b19..248cd7a8b163 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -4130,6 +4130,8 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, /* Zero the input context control for later use */ ctrl_ctx->add_flags = 0; ctrl_ctx->drop_flags = 0; + slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx); + udev->devaddr = (u8)(le32_to_cpu(slot_ctx->dev_state) & DEV_ADDR_MASK); xhci_dbg_trace(xhci, trace_xhci_dbg_address, "Internal device address = %d", @@ -5176,6 +5178,26 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) } EXPORT_SYMBOL_GPL(xhci_gen_setup); +static void xhci_clear_tt_buffer_complete(struct usb_hcd *hcd, + struct usb_host_endpoint *ep) +{ + struct xhci_hcd *xhci; + struct usb_device *udev; + unsigned int slot_id; + unsigned int ep_index; + unsigned long flags; + + xhci = hcd_to_xhci(hcd); + udev = (struct usb_device *)ep->hcpriv; + slot_id = udev->slot_id; + ep_index = xhci_get_endpoint_index(&ep->desc); + + spin_lock_irqsave(&xhci->lock, flags); + xhci->devs[slot_id]->eps[ep_index].ep_state &= ~EP_CLEARING_TT; + xhci_ring_doorbell_for_active_rings(xhci, slot_id, ep_index); + spin_unlock_irqrestore(&xhci->lock, flags); +} + static const struct hc_driver xhci_hc_driver = { .description = "xhci-hcd", .product_desc = "xHCI Host Controller", @@ -5237,6 +5259,7 @@ static const struct hc_driver xhci_hc_driver = { .enable_usb3_lpm_timeout = xhci_enable_usb3_lpm_timeout, .disable_usb3_lpm_timeout = xhci_disable_usb3_lpm_timeout, .find_raw_port_number = xhci_find_raw_port_number, + .clear_tt_buffer_complete = xhci_clear_tt_buffer_complete, }; void xhci_init_driver(struct hc_driver *drv, diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 92e764c54154..7a264962a1a9 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -936,6 +936,8 @@ struct xhci_virt_ep { #define EP_GETTING_NO_STREAMS (1 << 5) #define EP_HARD_CLEAR_TOGGLE (1 << 6) #define EP_SOFT_CLEAR_TOGGLE (1 << 7) +/* usb_hub_clear_tt_buffer is in progress */ +#define EP_CLEARING_TT (1 << 8) /* ---- Related to URB cancellation ---- */ struct list_head cancelled_td_list; /* Watchdog timer for stop endpoint command to cancel URBs */ @@ -2111,6 +2113,9 @@ void xhci_handle_command_timeout(struct work_struct *work); void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index, unsigned int stream_id); +void xhci_ring_doorbell_for_active_rings(struct xhci_hcd *xhci, + unsigned int slot_id, + unsigned int ep_index); void xhci_cleanup_command_queue(struct xhci_hcd *xhci); void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring); unsigned int count_trbs(u64 addr, u64 len); diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index 4a88e1ca25c0..bdae62b2ffe0 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -51,7 +51,7 @@ config USB_RIO500 tristate "USB Diamond Rio500 support" help Say Y here if you want to connect a USB Rio500 mp3 player to your - computer's USB port. Please read <file:Documentation/usb/rio.txt> + computer's USB port. Please read <file:Documentation/usb/rio.rst> for more information. To compile this driver as a module, choose M here: the diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c index 9465fb95d70a..344d523b0502 100644 --- a/drivers/usb/misc/adutux.c +++ b/drivers/usb/misc/adutux.c @@ -343,7 +343,6 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count, struct adu_device *dev; size_t bytes_read = 0; size_t bytes_to_read = count; - int i; int retval = 0; int timeout = 0; int should_submit = 0; @@ -371,23 +370,22 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count, timeout = COMMAND_TIMEOUT; dev_dbg(&dev->udev->dev, "%s : about to start looping\n", __func__); while (bytes_to_read) { - int data_in_secondary = dev->secondary_tail - dev->secondary_head; + size_t data_in_secondary = dev->secondary_tail - dev->secondary_head; dev_dbg(&dev->udev->dev, - "%s : while, data_in_secondary=%d, status=%d\n", + "%s : while, data_in_secondary=%zu, status=%d\n", __func__, data_in_secondary, dev->interrupt_in_urb->status); if (data_in_secondary) { /* drain secondary buffer */ - int amount = bytes_to_read < data_in_secondary ? bytes_to_read : data_in_secondary; - i = copy_to_user(buffer, dev->read_buffer_secondary+dev->secondary_head, amount); - if (i) { + size_t amount = min(bytes_to_read, data_in_secondary); + if (copy_to_user(buffer, dev->read_buffer_secondary+dev->secondary_head, amount)) { retval = -EFAULT; goto exit; } - dev->secondary_head += (amount - i); - bytes_read += (amount - i); - bytes_to_read -= (amount - i); + dev->secondary_head += amount; + bytes_read += amount; + bytes_to_read -= amount; } else { /* we check the primary buffer */ spin_lock_irqsave (&dev->buflock, flags); diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c index 257efacf3551..cdee3af33ad7 100644 --- a/drivers/usb/misc/ftdi-elan.c +++ b/drivers/usb/misc/ftdi-elan.c @@ -2023,13 +2023,6 @@ static int ftdi_elan_synchronize(struct usb_ftdi *ftdi) goto read; } else goto reset; - } else if (s1 == 0x31 && s2 == 0x60) { - if (read_stop-- > 0) { - goto read; - } else { - dev_err(&ftdi->udev->dev, "retry limit reached\n"); - continue; - } } else { if (read_stop-- > 0) { goto read; diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index ea06f1fed6fa..2ab9600d0898 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -1747,10 +1747,10 @@ static int sisusb_setup_screen(struct sisusb_usb_data *sisusb, return ret; } -static int sisusb_set_default_mode(struct sisusb_usb_data *sisusb, +static void sisusb_set_default_mode(struct sisusb_usb_data *sisusb, int touchengines) { - int ret = 0, i, j, modex, bpp, du; + int i, j, modex, bpp, du; u8 sr31, cr63, tmp8; static const char attrdata[] = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, @@ -1873,8 +1873,6 @@ static int sisusb_set_default_mode(struct sisusb_usb_data *sisusb, } SETIREG(SISCR, 0x34, 0x44); /* we just set std mode #44 */ - - return ret; } static int sisusb_init_gfxcore(struct sisusb_usb_data *sisusb) @@ -2019,7 +2017,7 @@ static int sisusb_init_gfxcore(struct sisusb_usb_data *sisusb) ret |= SETIREG(SISCR, 0x83, 0x00); - ret |= sisusb_set_default_mode(sisusb, 0); + sisusb_set_default_mode(sisusb, 0); ret |= SETIREGAND(SISSR, 0x21, 0xdf); ret |= SETIREGOR(SISSR, 0x01, 0x20); @@ -2246,7 +2244,7 @@ static int sisusb_init_gfxdevice(struct sisusb_usb_data *sisusb, int initscreen) if (sisusb_init_gfxcore(sisusb) == 0) { sisusb->gfxinit = 1; sisusb_get_ramconfig(sisusb); - ret |= sisusb_set_default_mode(sisusb, 1); + sisusb_set_default_mode(sisusb, 1); ret |= sisusb_setup_screen(sisusb, 1, initscreen); } } diff --git a/drivers/usb/mon/Kconfig b/drivers/usb/mon/Kconfig index 48f1b2dadb24..ffc7cd422874 100644 --- a/drivers/usb/mon/Kconfig +++ b/drivers/usb/mon/Kconfig @@ -8,6 +8,6 @@ config USB_MON help If you select this option, a component which captures the USB traffic between peripheral-specific drivers and HC drivers will be built. - For more information, see <file:Documentation/usb/usbmon.txt>. + For more information, see <file:Documentation/usb/usbmon.rst>. If unsure, say Y, if allowed, otherwise M. diff --git a/drivers/usb/mtu3/mtu3_debugfs.c b/drivers/usb/mtu3/mtu3_debugfs.c index b7c86ccd50b4..62c57ddc554e 100644 --- a/drivers/usb/mtu3/mtu3_debugfs.c +++ b/drivers/usb/mtu3/mtu3_debugfs.c @@ -528,7 +528,8 @@ void ssusb_dr_debugfs_init(struct ssusb_mtk *ssusb) void ssusb_debugfs_create_root(struct ssusb_mtk *ssusb) { - ssusb->dbgfs_root = debugfs_create_dir(dev_name(ssusb->dev), NULL); + ssusb->dbgfs_root = + debugfs_create_dir(dev_name(ssusb->dev), usb_debug_root); } void ssusb_debugfs_remove_root(struct ssusb_mtk *ssusb) diff --git a/drivers/usb/phy/phy-mv-usb.c b/drivers/usb/phy/phy-mv-usb.c index cfd9add10bf4..cf7ecdc9a9d4 100644 --- a/drivers/usb/phy/phy-mv-usb.c +++ b/drivers/usb/phy/phy-mv-usb.c @@ -401,7 +401,6 @@ static void mv_otg_update_state(struct mv_otg *mvotg) static void mv_otg_work(struct work_struct *work) { struct mv_otg *mvotg; - struct usb_phy *phy; struct usb_otg *otg; int old_state; @@ -409,7 +408,6 @@ static void mv_otg_work(struct work_struct *work) run: /* work queue is single thread, or we need spin_lock to protect */ - phy = &mvotg->phy; otg = mvotg->phy.otg; old_state = otg->state; diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c index 6fa16ab31e2e..70b8c8248caf 100644 --- a/drivers/usb/phy/phy-mxs-usb.c +++ b/drivers/usb/phy/phy-mxs-usb.c @@ -17,9 +17,11 @@ #include <linux/of_device.h> #include <linux/regmap.h> #include <linux/mfd/syscon.h> +#include <linux/iopoll.h> #define DRIVER_NAME "mxs_phy" +/* Register Macro */ #define HW_USBPHY_PWD 0x00 #define HW_USBPHY_TX 0x10 #define HW_USBPHY_CTRL 0x30 @@ -37,6 +39,11 @@ #define GM_USBPHY_TX_TXCAL45DN(x) (((x) & 0xf) << 8) #define GM_USBPHY_TX_D_CAL(x) (((x) & 0xf) << 0) +/* imx7ulp */ +#define HW_USBPHY_PLL_SIC 0xa0 +#define HW_USBPHY_PLL_SIC_SET 0xa4 +#define HW_USBPHY_PLL_SIC_CLR 0xa8 + #define BM_USBPHY_CTRL_SFTRST BIT(31) #define BM_USBPHY_CTRL_CLKGATE BIT(30) #define BM_USBPHY_CTRL_OTG_ID_VALUE BIT(27) @@ -55,6 +62,12 @@ #define BM_USBPHY_IP_FIX (BIT(17) | BIT(18)) #define BM_USBPHY_DEBUG_CLKGATE BIT(30) +/* imx7ulp */ +#define BM_USBPHY_PLL_LOCK BIT(31) +#define BM_USBPHY_PLL_REG_ENABLE BIT(21) +#define BM_USBPHY_PLL_BYPASS BIT(16) +#define BM_USBPHY_PLL_POWER BIT(12) +#define BM_USBPHY_PLL_EN_USB_CLKS BIT(6) /* Anatop Registers */ #define ANADIG_ANA_MISC0 0x150 @@ -168,6 +181,9 @@ static const struct mxs_phy_data imx6ul_phy_data = { .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS, }; +static const struct mxs_phy_data imx7ulp_phy_data = { +}; + static const struct of_device_id mxs_phy_dt_ids[] = { { .compatible = "fsl,imx6sx-usbphy", .data = &imx6sx_phy_data, }, { .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, }, @@ -175,6 +191,7 @@ static const struct of_device_id mxs_phy_dt_ids[] = { { .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, }, { .compatible = "fsl,vf610-usbphy", .data = &vf610_phy_data, }, { .compatible = "fsl,imx6ul-usbphy", .data = &imx6ul_phy_data, }, + { .compatible = "fsl,imx7ulp-usbphy", .data = &imx7ulp_phy_data, }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids); @@ -199,6 +216,11 @@ static inline bool is_imx6sl_phy(struct mxs_phy *mxs_phy) return mxs_phy->data == &imx6sl_phy_data; } +static inline bool is_imx7ulp_phy(struct mxs_phy *mxs_phy) +{ + return mxs_phy->data == &imx7ulp_phy_data; +} + /* * PHY needs some 32K cycles to switch from 32K clock to * bus (such as AHB/AXI, etc) clock. @@ -222,14 +244,49 @@ static void mxs_phy_tx_init(struct mxs_phy *mxs_phy) } } +static int mxs_phy_pll_enable(void __iomem *base, bool enable) +{ + int ret = 0; + + if (enable) { + u32 value; + + writel(BM_USBPHY_PLL_REG_ENABLE, base + HW_USBPHY_PLL_SIC_SET); + writel(BM_USBPHY_PLL_BYPASS, base + HW_USBPHY_PLL_SIC_CLR); + writel(BM_USBPHY_PLL_POWER, base + HW_USBPHY_PLL_SIC_SET); + ret = readl_poll_timeout(base + HW_USBPHY_PLL_SIC, + value, (value & BM_USBPHY_PLL_LOCK) != 0, + 100, 10000); + if (ret) + return ret; + + writel(BM_USBPHY_PLL_EN_USB_CLKS, base + + HW_USBPHY_PLL_SIC_SET); + } else { + writel(BM_USBPHY_PLL_EN_USB_CLKS, base + + HW_USBPHY_PLL_SIC_CLR); + writel(BM_USBPHY_PLL_POWER, base + HW_USBPHY_PLL_SIC_CLR); + writel(BM_USBPHY_PLL_BYPASS, base + HW_USBPHY_PLL_SIC_SET); + writel(BM_USBPHY_PLL_REG_ENABLE, base + HW_USBPHY_PLL_SIC_CLR); + } + + return ret; +} + static int mxs_phy_hw_init(struct mxs_phy *mxs_phy) { int ret; void __iomem *base = mxs_phy->phy.io_priv; + if (is_imx7ulp_phy(mxs_phy)) { + ret = mxs_phy_pll_enable(base, true); + if (ret) + return ret; + } + ret = stmp_reset_block(base + HW_USBPHY_CTRL); if (ret) - return ret; + goto disable_pll; /* Power up the PHY */ writel(0, base + HW_USBPHY_PWD); @@ -267,6 +324,11 @@ static int mxs_phy_hw_init(struct mxs_phy *mxs_phy) mxs_phy_tx_init(mxs_phy); return 0; + +disable_pll: + if (is_imx7ulp_phy(mxs_phy)) + mxs_phy_pll_enable(base, false); + return ret; } /* Return true if the vbus is there */ @@ -388,6 +450,9 @@ static void mxs_phy_shutdown(struct usb_phy *phy) writel(BM_USBPHY_CTRL_CLKGATE, phy->io_priv + HW_USBPHY_CTRL_SET); + if (is_imx7ulp_phy(mxs_phy)) + mxs_phy_pll_enable(phy->io_priv, false); + clk_disable_unprepare(mxs_phy->clk); } diff --git a/drivers/usb/renesas_usbhs/Kconfig b/drivers/usb/renesas_usbhs/Kconfig index 7fdbff23ae8b..d6b3fef3e55b 100644 --- a/drivers/usb/renesas_usbhs/Kconfig +++ b/drivers/usb/renesas_usbhs/Kconfig @@ -8,7 +8,6 @@ config USB_RENESAS_USBHS depends on USB_GADGET depends on ARCH_RENESAS || SUPERH || COMPILE_TEST depends on EXTCON || !EXTCON # if EXTCON=m, USBHS cannot be built-in - default n help Renesas USBHS is a discrete USB host and peripheral controller chip that supports both full and high speed USB 2.0 data transfers. diff --git a/drivers/usb/renesas_usbhs/Makefile b/drivers/usb/renesas_usbhs/Makefile index 5c5b51bb48ef..a1fed56b0957 100644 --- a/drivers/usb/renesas_usbhs/Makefile +++ b/drivers/usb/renesas_usbhs/Makefile @@ -5,7 +5,7 @@ obj-$(CONFIG_USB_RENESAS_USBHS) += renesas_usbhs.o -renesas_usbhs-y := common.o mod.o pipe.o fifo.o rcar2.o rcar3.o rza.o +renesas_usbhs-y := common.o mod.o pipe.o fifo.o rcar2.o rcar3.o rza.o rza2.o ifneq ($(CONFIG_USB_RENESAS_USBHS_HCD),) renesas_usbhs-y += mod_host.o diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c index 249fbee97f3f..4c3de777ef6c 100644 --- a/drivers/usb/renesas_usbhs/common.c +++ b/drivers/usb/renesas_usbhs/common.c @@ -3,6 +3,7 @@ * Renesas USB driver * * Copyright (C) 2011 Renesas Solutions Corp. + * Copyright (C) 2019 Renesas Electronics Corporation * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> */ #include <linux/clk.h> @@ -43,15 +44,6 @@ * | .... | +-----------+ */ - -#define USBHSF_RUNTIME_PWCTRL (1 << 0) - -/* status */ -#define usbhsc_flags_init(p) do {(p)->flags = 0; } while (0) -#define usbhsc_flags_set(p, b) ((p)->flags |= (b)) -#define usbhsc_flags_clr(p, b) ((p)->flags &= ~(b)) -#define usbhsc_flags_has(p, b) ((p)->flags & (b)) - /* * platform call back * @@ -61,8 +53,8 @@ */ #define usbhs_platform_call(priv, func, args...)\ (!(priv) ? -ENODEV : \ - !((priv)->pfunc.func) ? 0 : \ - (priv)->pfunc.func(args)) + !((priv)->pfunc->func) ? 0 : \ + (priv)->pfunc->func(args)) /* * common functions @@ -92,6 +84,11 @@ struct usbhs_priv *usbhs_pdev_to_priv(struct platform_device *pdev) return dev_get_drvdata(&pdev->dev); } +int usbhs_get_id_as_gadget(struct platform_device *pdev) +{ + return USBHS_GADGET; +} + /* * syscfg functions */ @@ -104,10 +101,6 @@ void usbhs_sys_host_ctrl(struct usbhs_priv *priv, int enable) { u16 mask = DCFM | DRPD | DPRPU | HSE | USBE; u16 val = DCFM | DRPD | HSE | USBE; - int has_otg = usbhs_get_dparam(priv, has_otg); - - if (has_otg) - usbhs_bset(priv, DVSTCTR, (EXTLP | PWEN), (EXTLP | PWEN)); /* * if enable @@ -123,6 +116,12 @@ void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable) u16 mask = DCFM | DRPD | DPRPU | HSE | USBE; u16 val = HSE | USBE; + /* CNEN bit is required for function operation */ + if (usbhs_get_dparam(priv, has_cnen)) { + mask |= CNEN; + val |= CNEN; + } + /* * if enable * @@ -294,11 +293,7 @@ static void usbhsc_set_buswait(struct usbhs_priv *priv) static bool usbhsc_is_multi_clks(struct usbhs_priv *priv) { - if (priv->dparam.type == USBHS_TYPE_RCAR_GEN3 || - priv->dparam.type == USBHS_TYPE_RCAR_GEN3_WITH_PLL) - return true; - - return false; + return priv->dparam.multi_clks; } static int usbhsc_clk_get(struct device *dev, struct usbhs_priv *priv) @@ -307,7 +302,7 @@ static int usbhsc_clk_get(struct device *dev, struct usbhs_priv *priv) return 0; /* The first clock should exist */ - priv->clks[0] = of_clk_get(dev->of_node, 0); + priv->clks[0] = of_clk_get(dev_of_node(dev), 0); if (IS_ERR(priv->clks[0])) return PTR_ERR(priv->clks[0]); @@ -315,7 +310,7 @@ static int usbhsc_clk_get(struct device *dev, struct usbhs_priv *priv) * To backward compatibility with old DT, this driver checks the return * value if it's -ENOENT or not. */ - priv->clks[1] = of_clk_get(dev->of_node, 1); + priv->clks[1] = of_clk_get(dev_of_node(dev), 1); if (PTR_ERR(priv->clks[1]) == -ENOENT) priv->clks[1] = NULL; else if (IS_ERR(priv->clks[1])) @@ -454,7 +449,7 @@ static void usbhsc_hotplug(struct usbhs_priv *priv) /* * get vbus status from platform */ - enable = usbhs_platform_call(priv, get_vbus, pdev); + enable = usbhs_mod_info_call(priv, get_vbus, pdev); /* * get id from platform @@ -479,7 +474,7 @@ static void usbhsc_hotplug(struct usbhs_priv *priv) dev_dbg(&pdev->dev, "%s enable\n", __func__); /* power on */ - if (usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) + if (usbhs_get_dparam(priv, runtime_pwctrl)) usbhsc_power_ctrl(priv, enable); /* bus init */ @@ -499,7 +494,7 @@ static void usbhsc_hotplug(struct usbhs_priv *priv) usbhsc_bus_init(priv); /* power off */ - if (usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) + if (usbhs_get_dparam(priv, runtime_pwctrl)) usbhsc_power_ctrl(priv, enable); usbhs_mod_change(priv, -1); @@ -520,7 +515,7 @@ static void usbhsc_notify_hotplug(struct work_struct *work) usbhsc_hotplug(priv); } -static int usbhsc_drvcllbck_notify_hotplug(struct platform_device *pdev) +int usbhsc_schedule_notify_hotplug(struct platform_device *pdev) { struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); int delay = usbhs_get_dparam(priv, detection_delay); @@ -541,115 +536,86 @@ static int usbhsc_drvcllbck_notify_hotplug(struct platform_device *pdev) static const struct of_device_id usbhs_of_match[] = { { .compatible = "renesas,usbhs-r8a774c0", - .data = (void *)USBHS_TYPE_RCAR_GEN3_WITH_PLL, + .data = &usbhs_rcar_gen3_with_pll_plat_info, }, { .compatible = "renesas,usbhs-r8a7790", - .data = (void *)USBHS_TYPE_RCAR_GEN2, + .data = &usbhs_rcar_gen2_plat_info, }, { .compatible = "renesas,usbhs-r8a7791", - .data = (void *)USBHS_TYPE_RCAR_GEN2, + .data = &usbhs_rcar_gen2_plat_info, }, { .compatible = "renesas,usbhs-r8a7794", - .data = (void *)USBHS_TYPE_RCAR_GEN2, + .data = &usbhs_rcar_gen2_plat_info, }, { .compatible = "renesas,usbhs-r8a7795", - .data = (void *)USBHS_TYPE_RCAR_GEN3, + .data = &usbhs_rcar_gen3_plat_info, }, { .compatible = "renesas,usbhs-r8a7796", - .data = (void *)USBHS_TYPE_RCAR_GEN3, + .data = &usbhs_rcar_gen3_plat_info, }, { .compatible = "renesas,usbhs-r8a77990", - .data = (void *)USBHS_TYPE_RCAR_GEN3_WITH_PLL, + .data = &usbhs_rcar_gen3_with_pll_plat_info, }, { .compatible = "renesas,usbhs-r8a77995", - .data = (void *)USBHS_TYPE_RCAR_GEN3_WITH_PLL, + .data = &usbhs_rcar_gen3_with_pll_plat_info, }, { .compatible = "renesas,rcar-gen2-usbhs", - .data = (void *)USBHS_TYPE_RCAR_GEN2, + .data = &usbhs_rcar_gen2_plat_info, }, { .compatible = "renesas,rcar-gen3-usbhs", - .data = (void *)USBHS_TYPE_RCAR_GEN3, + .data = &usbhs_rcar_gen3_plat_info, }, { .compatible = "renesas,rza1-usbhs", - .data = (void *)USBHS_TYPE_RZA1, + .data = &usbhs_rza1_plat_info, + }, + { + .compatible = "renesas,rza2-usbhs", + .data = &usbhs_rza2_plat_info, }, { }, }; MODULE_DEVICE_TABLE(of, usbhs_of_match); -static struct renesas_usbhs_platform_info *usbhs_parse_dt(struct device *dev) -{ - struct renesas_usbhs_platform_info *info; - struct renesas_usbhs_driver_param *dparam; - u32 tmp; - int gpio; - - info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL); - if (!info) - return NULL; - - dparam = &info->driver_param; - dparam->type = (uintptr_t)of_device_get_match_data(dev); - if (!of_property_read_u32(dev->of_node, "renesas,buswait", &tmp)) - dparam->buswait_bwait = tmp; - gpio = of_get_named_gpio_flags(dev->of_node, "renesas,enable-gpio", 0, - NULL); - if (gpio > 0) - dparam->enable_gpio = gpio; - - if (dparam->type == USBHS_TYPE_RCAR_GEN2 || - dparam->type == USBHS_TYPE_RCAR_GEN3 || - dparam->type == USBHS_TYPE_RCAR_GEN3_WITH_PLL) { - dparam->has_usb_dmac = 1; - dparam->pipe_configs = usbhsc_new_pipe; - dparam->pipe_size = ARRAY_SIZE(usbhsc_new_pipe); - } - - if (dparam->type == USBHS_TYPE_RZA1) { - dparam->pipe_configs = usbhsc_new_pipe; - dparam->pipe_size = ARRAY_SIZE(usbhsc_new_pipe); - } - - return info; -} - static int usbhs_probe(struct platform_device *pdev) { - struct renesas_usbhs_platform_info *info = renesas_usbhs_get_info(pdev); - struct renesas_usbhs_driver_callback *dfunc; + const struct renesas_usbhs_platform_info *info; struct usbhs_priv *priv; struct resource *res, *irq_res; - int ret; + struct device *dev = &pdev->dev; + int ret, gpio; + u32 tmp; /* check device node */ - if (pdev->dev.of_node) - info = pdev->dev.platform_data = usbhs_parse_dt(&pdev->dev); + if (dev_of_node(dev)) + info = of_device_get_match_data(dev); + else + info = renesas_usbhs_get_info(pdev); /* check platform information */ if (!info) { - dev_err(&pdev->dev, "no platform information\n"); + dev_err(dev, "no platform information\n"); return -EINVAL; } /* platform data */ irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (!irq_res) { - dev_err(&pdev->dev, "Not enough Renesas USB platform resources.\n"); + dev_err(dev, "Not enough Renesas USB platform resources.\n"); return -ENODEV; } /* usb private data */ - priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; @@ -658,13 +624,13 @@ static int usbhs_probe(struct platform_device *pdev) if (IS_ERR(priv->base)) return PTR_ERR(priv->base); - if (of_property_read_bool(pdev->dev.of_node, "extcon")) { - priv->edev = extcon_get_edev_by_phandle(&pdev->dev, 0); + if (of_property_read_bool(dev_of_node(dev), "extcon")) { + priv->edev = extcon_get_edev_by_phandle(dev, 0); if (IS_ERR(priv->edev)) return PTR_ERR(priv->edev); } - priv->rsts = devm_reset_control_array_get_optional_shared(&pdev->dev); + priv->rsts = devm_reset_control_array_get_optional_shared(dev); if (IS_ERR(priv->rsts)) return PTR_ERR(priv->rsts); @@ -672,50 +638,35 @@ static int usbhs_probe(struct platform_device *pdev) * care platform info */ - memcpy(&priv->dparam, - &info->driver_param, - sizeof(struct renesas_usbhs_driver_param)); + priv->dparam = info->driver_param; - switch (priv->dparam.type) { - case USBHS_TYPE_RCAR_GEN2: - priv->pfunc = usbhs_rcar2_ops; - break; - case USBHS_TYPE_RCAR_GEN3: - priv->pfunc = usbhs_rcar3_ops; - break; - case USBHS_TYPE_RCAR_GEN3_WITH_PLL: - priv->pfunc = usbhs_rcar3_with_pll_ops; - break; - case USBHS_TYPE_RZA1: - priv->pfunc = usbhs_rza1_ops; - break; - default: - if (!info->platform_callback.get_id) { - dev_err(&pdev->dev, "no platform callbacks"); - return -EINVAL; - } - memcpy(&priv->pfunc, - &info->platform_callback, - sizeof(struct renesas_usbhs_platform_callback)); - break; + if (!info->platform_callback.get_id) { + dev_err(dev, "no platform callbacks\n"); + return -EINVAL; } - - /* set driver callback functions for platform */ - dfunc = &info->driver_callback; - dfunc->notify_hotplug = usbhsc_drvcllbck_notify_hotplug; + priv->pfunc = &info->platform_callback; /* set default param if platform doesn't have */ - if (!priv->dparam.pipe_configs) { + if (usbhs_get_dparam(priv, has_new_pipe_configs)) { + priv->dparam.pipe_configs = usbhsc_new_pipe; + priv->dparam.pipe_size = ARRAY_SIZE(usbhsc_new_pipe); + } else if (!priv->dparam.pipe_configs) { priv->dparam.pipe_configs = usbhsc_default_pipe; priv->dparam.pipe_size = ARRAY_SIZE(usbhsc_default_pipe); } if (!priv->dparam.pio_dma_border) priv->dparam.pio_dma_border = 64; /* 64byte */ + if (!of_property_read_u32(dev_of_node(dev), "renesas,buswait", &tmp)) + priv->dparam.buswait_bwait = tmp; + gpio = of_get_named_gpio_flags(dev_of_node(dev), "renesas,enable-gpio", + 0, NULL); + if (gpio > 0) + priv->dparam.enable_gpio = gpio; /* FIXME */ /* runtime power control ? */ - if (priv->pfunc.get_vbus) - usbhsc_flags_set(priv, USBHSF_RUNTIME_PWCTRL); + if (priv->pfunc->get_vbus) + usbhs_get_dparam(priv, runtime_pwctrl) = 1; /* * priv settings @@ -747,7 +698,7 @@ static int usbhs_probe(struct platform_device *pdev) if (ret) goto probe_fail_rst; - ret = usbhsc_clk_get(&pdev->dev, priv); + ret = usbhsc_clk_get(dev, priv); if (ret) goto probe_fail_clks; @@ -763,8 +714,7 @@ static int usbhs_probe(struct platform_device *pdev) ret = !gpio_get_value(priv->dparam.enable_gpio); gpio_free(priv->dparam.enable_gpio); if (ret) { - dev_warn(&pdev->dev, - "USB function not selected (GPIO %d)\n", + dev_warn(dev, "USB function not selected (GPIO %d)\n", priv->dparam.enable_gpio); ret = -ENOTSUPP; goto probe_end_mod_exit; @@ -780,7 +730,7 @@ static int usbhs_probe(struct platform_device *pdev) */ ret = usbhs_platform_call(priv, hardware_init, pdev); if (ret < 0) { - dev_err(&pdev->dev, "platform init failed.\n"); + dev_err(dev, "platform init failed.\n"); goto probe_end_mod_exit; } @@ -788,18 +738,20 @@ static int usbhs_probe(struct platform_device *pdev) usbhs_platform_call(priv, phy_reset, pdev); /* power control */ - pm_runtime_enable(&pdev->dev); - if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) { + pm_runtime_enable(dev); + if (!usbhs_get_dparam(priv, runtime_pwctrl)) { usbhsc_power_ctrl(priv, 1); usbhs_mod_autonomy_mode(priv); + } else { + usbhs_mod_non_autonomy_mode(priv); } /* * manual call notify_hotplug for cold plug */ - usbhsc_drvcllbck_notify_hotplug(pdev); + usbhsc_schedule_notify_hotplug(pdev); - dev_info(&pdev->dev, "probed\n"); + dev_info(dev, "probed\n"); return ret; @@ -814,7 +766,7 @@ probe_end_fifo_exit: probe_end_pipe_exit: usbhs_pipe_remove(priv); - dev_info(&pdev->dev, "probe failed (%d)\n", ret); + dev_info(dev, "probe failed (%d)\n", ret); return ret; } @@ -822,15 +774,11 @@ probe_end_pipe_exit: static int usbhs_remove(struct platform_device *pdev) { struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); - struct renesas_usbhs_platform_info *info = renesas_usbhs_get_info(pdev); - struct renesas_usbhs_driver_callback *dfunc = &info->driver_callback; dev_dbg(&pdev->dev, "usb remove\n"); - dfunc->notify_hotplug = NULL; - /* power off */ - if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) + if (!usbhs_get_dparam(priv, runtime_pwctrl)) usbhsc_power_ctrl(priv, 0); pm_runtime_disable(&pdev->dev); @@ -855,7 +803,7 @@ static __maybe_unused int usbhsc_suspend(struct device *dev) usbhs_mod_change(priv, -1); } - if (mod || !usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) + if (mod || !usbhs_get_dparam(priv, runtime_pwctrl)) usbhsc_power_ctrl(priv, 0); return 0; @@ -866,14 +814,14 @@ static __maybe_unused int usbhsc_resume(struct device *dev) struct usbhs_priv *priv = dev_get_drvdata(dev); struct platform_device *pdev = usbhs_priv_to_pdev(priv); - if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) { + if (!usbhs_get_dparam(priv, runtime_pwctrl)) { usbhsc_power_ctrl(priv, 1); usbhs_mod_autonomy_mode(priv); } usbhs_platform_call(priv, phy_reset, pdev); - usbhsc_drvcllbck_notify_hotplug(pdev); + usbhsc_schedule_notify_hotplug(pdev); return 0; } diff --git a/drivers/usb/renesas_usbhs/common.h b/drivers/usb/renesas_usbhs/common.h index 3777af848a35..d1a0a35ecfff 100644 --- a/drivers/usb/renesas_usbhs/common.h +++ b/drivers/usb/renesas_usbhs/common.h @@ -3,6 +3,7 @@ * Renesas USB driver * * Copyright (C) 2011 Renesas Solutions Corp. + * Copyright (C) 2019 Renesas Electronics Corporation * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> */ #ifndef RENESAS_USB_DRIVER_H @@ -104,6 +105,7 @@ struct usbhs_priv; /* SYSCFG */ #define SCKE (1 << 10) /* USB Module Clock Enable */ +#define CNEN (1 << 8) /* Single-ended receiver operation Enable */ #define HSE (1 << 7) /* High-Speed Operation Enable */ #define DCFM (1 << 6) /* Controller Function Select */ #define DRPD (1 << 5) /* D+ Line/D- Line Resistance Control */ @@ -250,7 +252,7 @@ struct usbhs_priv { unsigned int irq; unsigned long irqflags; - struct renesas_usbhs_platform_callback pfunc; + const struct renesas_usbhs_platform_callback *pfunc; struct renesas_usbhs_driver_param dparam; struct delayed_work notify_hotplug_work; @@ -260,8 +262,6 @@ struct usbhs_priv { spinlock_t lock; - u32 flags; - /* * module control */ @@ -292,6 +292,8 @@ void usbhs_bset(struct usbhs_priv *priv, u32 reg, u16 mask, u16 data); #define usbhs_lock(p, f) spin_lock_irqsave(usbhs_priv_to_lock(p), f) #define usbhs_unlock(p, f) spin_unlock_irqrestore(usbhs_priv_to_lock(p), f) +int usbhs_get_id_as_gadget(struct platform_device *pdev); + /* * sysconfig */ @@ -313,6 +315,7 @@ void usbhs_bus_send_sof_enable(struct usbhs_priv *priv); void usbhs_bus_send_reset(struct usbhs_priv *priv); int usbhs_bus_get_speed(struct usbhs_priv *priv); int usbhs_vbus_ctrl(struct usbhs_priv *priv, int enable); +int usbhsc_schedule_notify_hotplug(struct platform_device *pdev); /* * frame diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c index 39fa2fc1b8b7..2a01ceb71641 100644 --- a/drivers/usb/renesas_usbhs/fifo.c +++ b/drivers/usb/renesas_usbhs/fifo.c @@ -3,6 +3,7 @@ * Renesas USB driver * * Copyright (C) 2011 Renesas Solutions Corp. + * Copyright (C) 2019 Renesas Electronics Corporation * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> */ #include <linux/delay.h> @@ -12,7 +13,6 @@ #include "pipe.h" #define usbhsf_get_cfifo(p) (&((p)->fifo_info.cfifo)) -#define usbhsf_is_cfifo(p, f) (usbhsf_get_cfifo(p) == f) #define usbhsf_fifo_is_busy(f) ((f)->pipe) /* see usbhs_pipe_select_fifo */ @@ -325,10 +325,7 @@ static int usbhsf_fifo_select(struct usbhs_pipe *pipe, } /* "base" will be used below */ - if (usbhs_get_dparam(priv, has_sudmac) && !usbhsf_is_cfifo(priv, fifo)) - usbhs_write(priv, fifo->sel, base); - else - usbhs_write(priv, fifo->sel, base | MBW_32); + usbhs_write(priv, fifo->sel, base | MBW_32); /* check ISEL and CURPIPE value */ while (timeout--) { @@ -543,8 +540,13 @@ static int usbhsf_pio_try_push(struct usbhs_pkt *pkt, int *is_done) } /* the rest operation */ - for (i = 0; i < len; i++) - iowrite8(buf[i], addr + (0x03 - (i & 0x03))); + if (usbhs_get_dparam(priv, cfifo_byte_addr)) { + for (i = 0; i < len; i++) + iowrite8(buf[i], addr + (i & 0x03)); + } else { + for (i = 0; i < len; i++) + iowrite8(buf[i], addr + (0x03 - (i & 0x03))); + } /* * variable update @@ -802,9 +804,8 @@ static int __usbhsf_dma_map_ctrl(struct usbhs_pkt *pkt, int map) } static void usbhsf_dma_complete(void *arg); -static void xfer_work(struct work_struct *work) +static void usbhsf_dma_xfer_preparing(struct usbhs_pkt *pkt) { - struct usbhs_pkt *pkt = container_of(work, struct usbhs_pkt, work); struct usbhs_pipe *pipe = pkt->pipe; struct usbhs_fifo *fifo; struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); @@ -812,12 +813,10 @@ static void xfer_work(struct work_struct *work) struct dma_chan *chan; struct device *dev = usbhs_priv_to_dev(priv); enum dma_transfer_direction dir; - unsigned long flags; - usbhs_lock(priv, flags); fifo = usbhs_pipe_to_fifo(pipe); if (!fifo) - goto xfer_work_end; + return; chan = usbhsf_dma_chan_get(fifo, pkt); dir = usbhs_pipe_is_dir_in(pipe) ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV; @@ -826,7 +825,7 @@ static void xfer_work(struct work_struct *work) pkt->trans, dir, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) - goto xfer_work_end; + return; desc->callback = usbhsf_dma_complete; desc->callback_param = pipe; @@ -834,7 +833,7 @@ static void xfer_work(struct work_struct *work) pkt->cookie = dmaengine_submit(desc); if (pkt->cookie < 0) { dev_err(dev, "Failed to submit dma descriptor\n"); - goto xfer_work_end; + return; } dev_dbg(dev, " %s %d (%d/ %d)\n", @@ -845,8 +844,17 @@ static void xfer_work(struct work_struct *work) dma_async_issue_pending(chan); usbhsf_dma_start(pipe, fifo); usbhs_pipe_enable(pipe); +} -xfer_work_end: +static void xfer_work(struct work_struct *work) +{ + struct usbhs_pkt *pkt = container_of(work, struct usbhs_pkt, work); + struct usbhs_pipe *pipe = pkt->pipe; + struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); + unsigned long flags; + + usbhs_lock(priv, flags); + usbhsf_dma_xfer_preparing(pkt); usbhs_unlock(priv, flags); } @@ -899,8 +907,13 @@ static int usbhsf_dma_prepare_push(struct usbhs_pkt *pkt, int *is_done) pkt->trans = len; usbhsf_tx_irq_ctrl(pipe, 0); - INIT_WORK(&pkt->work, xfer_work); - schedule_work(&pkt->work); + /* FIXME: Workaound for usb dmac that driver can be used in atomic */ + if (usbhs_get_dparam(priv, has_usb_dmac)) { + usbhsf_dma_xfer_preparing(pkt); + } else { + INIT_WORK(&pkt->work, xfer_work); + schedule_work(&pkt->work); + } return 0; @@ -1006,8 +1019,7 @@ static int usbhsf_dma_prepare_pop_with_usb_dmac(struct usbhs_pkt *pkt, pkt->trans = pkt->length; - INIT_WORK(&pkt->work, xfer_work); - schedule_work(&pkt->work); + usbhsf_dma_xfer_preparing(pkt); return 0; @@ -1276,7 +1288,7 @@ static void usbhsf_dma_init(struct usbhs_priv *priv, struct usbhs_fifo *fifo, { struct device *dev = usbhs_priv_to_dev(priv); - if (dev->of_node) + if (dev_of_node(dev)) usbhsf_dma_init_dt(dev, fifo, channel); else usbhsf_dma_init_pdev(fifo); diff --git a/drivers/usb/renesas_usbhs/mod.c b/drivers/usb/renesas_usbhs/mod.c index 7475c4f64724..10fc65596014 100644 --- a/drivers/usb/renesas_usbhs/mod.c +++ b/drivers/usb/renesas_usbhs/mod.c @@ -3,6 +3,7 @@ * Renesas USB driver * * Copyright (C) 2011 Renesas Solutions Corp. + * Copyright (C) 2019 Renesas Electronics Corporation * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> */ #include <linux/interrupt.h> @@ -10,15 +11,6 @@ #include "common.h" #include "mod.h" -#define usbhs_priv_to_modinfo(priv) (&priv->mod_info) -#define usbhs_mod_info_call(priv, func, param...) \ -({ \ - struct usbhs_mod_info *info; \ - info = usbhs_priv_to_modinfo(priv); \ - !info->func ? 0 : \ - info->func(param); \ -}) - /* * autonomy * @@ -41,7 +33,7 @@ static int usbhsm_autonomy_irq_vbus(struct usbhs_priv *priv, { struct platform_device *pdev = usbhs_priv_to_pdev(priv); - renesas_usbhs_call_notify_hotplug(pdev); + usbhsc_schedule_notify_hotplug(pdev); return 0; } @@ -50,12 +42,19 @@ void usbhs_mod_autonomy_mode(struct usbhs_priv *priv) { struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv); - info->irq_vbus = usbhsm_autonomy_irq_vbus; - priv->pfunc.get_vbus = usbhsm_autonomy_get_vbus; + info->irq_vbus = usbhsm_autonomy_irq_vbus; + info->get_vbus = usbhsm_autonomy_get_vbus; usbhs_irq_callback_update(priv, NULL); } +void usbhs_mod_non_autonomy_mode(struct usbhs_priv *priv) +{ + struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv); + + info->get_vbus = priv->pfunc->get_vbus; +} + /* * host / gadget functions * diff --git a/drivers/usb/renesas_usbhs/mod.h b/drivers/usb/renesas_usbhs/mod.h index a4a61d6b82a1..65dc19ca528e 100644 --- a/drivers/usb/renesas_usbhs/mod.h +++ b/drivers/usb/renesas_usbhs/mod.h @@ -3,6 +3,7 @@ * Renesas USB driver * * Copyright (C) 2011 Renesas Solutions Corp. + * Copyright (C) 2019 Renesas Electronics Corporation * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> */ #ifndef RENESAS_USB_MOD_H @@ -84,15 +85,20 @@ struct usbhs_mod_info { /* * INTSTS0 :: VBINT * - * This function will be used as autonomy mode - * when platform cannot call notify_hotplug. + * This function will be used as autonomy mode (runtime_pwctrl == 0) + * when the platform doesn't have own get_vbus function. * - * This callback cannot be member of "struct usbhs_mod" - * because it will be used even though - * host/gadget has not been selected. + * This callback cannot be member of "struct usbhs_mod" because it + * will be used even though host/gadget has not been selected. */ int (*irq_vbus)(struct usbhs_priv *priv, struct usbhs_irq_state *irq_state); + + /* + * This function will be used on any gadget mode. To simplify the code, + * this member is in here. + */ + int (*get_vbus)(struct platform_device *pdev); }; /* @@ -107,6 +113,7 @@ int usbhs_mod_probe(struct usbhs_priv *priv); void usbhs_mod_remove(struct usbhs_priv *priv); void usbhs_mod_autonomy_mode(struct usbhs_priv *priv); +void usbhs_mod_non_autonomy_mode(struct usbhs_priv *priv); /* * status functions @@ -129,6 +136,15 @@ void usbhs_irq_callback_update(struct usbhs_priv *priv, struct usbhs_mod *mod); mod->func(param); \ }) +#define usbhs_priv_to_modinfo(priv) (&priv->mod_info) +#define usbhs_mod_info_call(priv, func, param...) \ +({ \ + struct usbhs_mod_info *info; \ + info = usbhs_priv_to_modinfo(priv); \ + !info->func ? 0 : \ + info->func(param); \ +}) + /* * host / gadget control */ diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index 59cac40aafcc..4d571a5205e2 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -3,6 +3,7 @@ * Renesas USB driver * * Copyright (C) 2011 Renesas Solutions Corp. + * Copyright (C) 2019 Renesas Electronics Corporation * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> */ #include <linux/delay.h> @@ -914,8 +915,8 @@ static void usbhs_mod_phy_mode(struct usbhs_priv *priv) { struct usbhs_mod_info *info = &priv->mod_info; - info->irq_vbus = NULL; - priv->pfunc.get_vbus = usbhsm_phy_get_vbus; + info->irq_vbus = NULL; + info->get_vbus = usbhsm_phy_get_vbus; usbhs_irq_callback_update(priv, NULL); } @@ -1023,7 +1024,7 @@ static int usbhsg_vbus_session(struct usb_gadget *gadget, int is_active) gpriv->vbus_active = !!is_active; - renesas_usbhs_call_notify_hotplug(pdev); + usbhsc_schedule_notify_hotplug(pdev); return 0; } diff --git a/drivers/usb/renesas_usbhs/rcar2.c b/drivers/usb/renesas_usbhs/rcar2.c index 0027092b1118..440d213e1749 100644 --- a/drivers/usb/renesas_usbhs/rcar2.c +++ b/drivers/usb/renesas_usbhs/rcar2.c @@ -3,6 +3,7 @@ * Renesas USB driver R-Car Gen. 2 initialization and power control * * Copyright (C) 2014 Ulrich Hecht + * Copyright (C) 2019 Renesas Electronics Corporation */ #include <linux/gpio.h> @@ -62,14 +63,15 @@ static int usbhs_rcar2_power_ctrl(struct platform_device *pdev, return retval; } -static int usbhs_rcar2_get_id(struct platform_device *pdev) -{ - return USBHS_GADGET; -} - -const struct renesas_usbhs_platform_callback usbhs_rcar2_ops = { - .hardware_init = usbhs_rcar2_hardware_init, - .hardware_exit = usbhs_rcar2_hardware_exit, - .power_ctrl = usbhs_rcar2_power_ctrl, - .get_id = usbhs_rcar2_get_id, +const struct renesas_usbhs_platform_info usbhs_rcar_gen2_plat_info = { + .platform_callback = { + .hardware_init = usbhs_rcar2_hardware_init, + .hardware_exit = usbhs_rcar2_hardware_exit, + .power_ctrl = usbhs_rcar2_power_ctrl, + .get_id = usbhs_get_id_as_gadget, + }, + .driver_param = { + .has_usb_dmac = 1, + .has_new_pipe_configs = 1, + }, }; diff --git a/drivers/usb/renesas_usbhs/rcar2.h b/drivers/usb/renesas_usbhs/rcar2.h index 45e3526cedeb..7d88732c5bff 100644 --- a/drivers/usb/renesas_usbhs/rcar2.h +++ b/drivers/usb/renesas_usbhs/rcar2.h @@ -1,5 +1,4 @@ // SPDX-License-Identifier: GPL-2.0 #include "common.h" -extern const struct renesas_usbhs_platform_callback - usbhs_rcar2_ops; +extern const struct renesas_usbhs_platform_info usbhs_rcar_gen2_plat_info; diff --git a/drivers/usb/renesas_usbhs/rcar3.c b/drivers/usb/renesas_usbhs/rcar3.c index 5e730e9b40ef..c181b2a0b9d3 100644 --- a/drivers/usb/renesas_usbhs/rcar3.c +++ b/drivers/usb/renesas_usbhs/rcar3.c @@ -2,7 +2,7 @@ /* * Renesas USB driver R-Car Gen. 3 initialization and power control * - * Copyright (C) 2016 Renesas Electronics Corporation + * Copyright (C) 2016-2019 Renesas Electronics Corporation */ #include <linux/delay.h> @@ -95,17 +95,26 @@ static int usbhs_rcar3_power_and_pll_ctrl(struct platform_device *pdev, return 0; } -static int usbhs_rcar3_get_id(struct platform_device *pdev) -{ - return USBHS_GADGET; -} - -const struct renesas_usbhs_platform_callback usbhs_rcar3_ops = { - .power_ctrl = usbhs_rcar3_power_ctrl, - .get_id = usbhs_rcar3_get_id, +const struct renesas_usbhs_platform_info usbhs_rcar_gen3_plat_info = { + .platform_callback = { + .power_ctrl = usbhs_rcar3_power_ctrl, + .get_id = usbhs_get_id_as_gadget, + }, + .driver_param = { + .has_usb_dmac = 1, + .multi_clks = 1, + .has_new_pipe_configs = 1, + }, }; -const struct renesas_usbhs_platform_callback usbhs_rcar3_with_pll_ops = { - .power_ctrl = usbhs_rcar3_power_and_pll_ctrl, - .get_id = usbhs_rcar3_get_id, +const struct renesas_usbhs_platform_info usbhs_rcar_gen3_with_pll_plat_info = { + .platform_callback = { + .power_ctrl = usbhs_rcar3_power_and_pll_ctrl, + .get_id = usbhs_get_id_as_gadget, + }, + .driver_param = { + .has_usb_dmac = 1, + .multi_clks = 1, + .has_new_pipe_configs = 1, + }, }; diff --git a/drivers/usb/renesas_usbhs/rcar3.h b/drivers/usb/renesas_usbhs/rcar3.h index 49e535a31771..c7c5ec1e3af2 100644 --- a/drivers/usb/renesas_usbhs/rcar3.h +++ b/drivers/usb/renesas_usbhs/rcar3.h @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include "common.h" -extern const struct renesas_usbhs_platform_callback usbhs_rcar3_ops; -extern const struct renesas_usbhs_platform_callback usbhs_rcar3_with_pll_ops; +extern const struct renesas_usbhs_platform_info usbhs_rcar_gen3_plat_info; +extern const struct renesas_usbhs_platform_info + usbhs_rcar_gen3_with_pll_plat_info; diff --git a/drivers/usb/renesas_usbhs/rza.c b/drivers/usb/renesas_usbhs/rza.c index 8c739bd24acd..24de64edb674 100644 --- a/drivers/usb/renesas_usbhs/rza.c +++ b/drivers/usb/renesas_usbhs/rza.c @@ -3,7 +3,7 @@ * Renesas USB driver RZ/A initialization and power control * * Copyright (C) 2018 Chris Brandt - * Copyright (C) 2018 Renesas Electronics Corporation + * Copyright (C) 2018-2019 Renesas Electronics Corporation */ #include <linux/delay.h> @@ -41,12 +41,12 @@ static int usbhs_rza1_hardware_init(struct platform_device *pdev) return 0; } -static int usbhs_rza_get_id(struct platform_device *pdev) -{ - return USBHS_GADGET; -} - -const struct renesas_usbhs_platform_callback usbhs_rza1_ops = { - .hardware_init = usbhs_rza1_hardware_init, - .get_id = usbhs_rza_get_id, +const struct renesas_usbhs_platform_info usbhs_rza1_plat_info = { + .platform_callback = { + .hardware_init = usbhs_rza1_hardware_init, + .get_id = usbhs_get_id_as_gadget, + }, + .driver_param = { + .has_new_pipe_configs = 1, + }, }; diff --git a/drivers/usb/renesas_usbhs/rza.h b/drivers/usb/renesas_usbhs/rza.h index ca917ca54f6d..1ca42a6fd480 100644 --- a/drivers/usb/renesas_usbhs/rza.h +++ b/drivers/usb/renesas_usbhs/rza.h @@ -1,4 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 #include "common.h" -extern const struct renesas_usbhs_platform_callback usbhs_rza1_ops; +extern const struct renesas_usbhs_platform_info usbhs_rza1_plat_info; +extern const struct renesas_usbhs_platform_info usbhs_rza2_plat_info; diff --git a/drivers/usb/renesas_usbhs/rza2.c b/drivers/usb/renesas_usbhs/rza2.c new file mode 100644 index 000000000000..021749594389 --- /dev/null +++ b/drivers/usb/renesas_usbhs/rza2.c @@ -0,0 +1,74 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Renesas USB driver RZ/A2 initialization and power control + * + * Copyright (C) 2019 Chris Brandt + * Copyright (C) 2019 Renesas Electronics Corporation + */ + +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/of_device.h> +#include <linux/phy/phy.h> +#include "common.h" +#include "rza.h" + +static int usbhs_rza2_hardware_init(struct platform_device *pdev) +{ + struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); + struct phy *phy = phy_get(&pdev->dev, "usb"); + + if (IS_ERR(phy)) + return PTR_ERR(phy); + + priv->phy = phy; + return 0; +} + +static int usbhs_rza2_hardware_exit(struct platform_device *pdev) +{ + struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); + + phy_put(priv->phy); + priv->phy = NULL; + + return 0; +} + +static int usbhs_rza2_power_ctrl(struct platform_device *pdev, + void __iomem *base, int enable) +{ + struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); + int retval = 0; + + if (!priv->phy) + return -ENODEV; + + if (enable) { + retval = phy_init(priv->phy); + usbhs_bset(priv, SUSPMODE, SUSPM, SUSPM); + udelay(100); /* Wait for PLL to become stable */ + if (!retval) + retval = phy_power_on(priv->phy); + } else { + usbhs_bset(priv, SUSPMODE, SUSPM, 0); + phy_power_off(priv->phy); + phy_exit(priv->phy); + } + + return retval; +} + +const struct renesas_usbhs_platform_info usbhs_rza2_plat_info = { + .platform_callback = { + .hardware_init = usbhs_rza2_hardware_init, + .hardware_exit = usbhs_rza2_hardware_exit, + .power_ctrl = usbhs_rza2_power_ctrl, + .get_id = usbhs_get_id_as_gadget, + }, + .driver_param = { + .has_cnen = 1, + .cfifo_byte_addr = 1, + .has_new_pipe_configs = 1, + }, +}; diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 7d031911d04e..67279c6bce33 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -11,7 +11,7 @@ menuconfig USB_SERIAL ports, or acts like a serial device, and you want to connect it to your USB bus. - Please read <file:Documentation/usb/usb-serial.txt> for more + Please read <file:Documentation/usb/usb-serial.rst> for more information on the specifics of the different devices that are supported, and on how to use them. @@ -47,7 +47,7 @@ config USB_SERIAL_GENERIC bool "USB Generic Serial Driver" help Say Y here if you want to use the generic USB serial driver. Please - read <file:Documentation/usb/usb-serial.txt> for more information on + read <file:Documentation/usb/usb-serial.rst> for more information on using this driver. It is recommended that the "USB Serial converter support" be compiled as a module for this driver to be used properly. @@ -163,7 +163,7 @@ config USB_SERIAL_EMPEG help Say Y here if you want to connect to your Empeg empeg-car Mark I/II mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...} - device node. See <file:Documentation/usb/usb-serial.txt> for more + device node. See <file:Documentation/usb/usb-serial.rst> for more tidbits of information. To compile this driver as a module, choose M here: the @@ -199,7 +199,7 @@ config USB_SERIAL_IPAQ Say Y here if you want to connect to your Compaq iPAQ, HP Jornada or any other PDA running Windows CE 3.0 or PocketPC 2002 using a USB cradle/cable. For information on using the driver, - read <file:Documentation/usb/usb-serial.txt>. + read <file:Documentation/usb/usb-serial.rst>. To compile this driver as a module, choose M here: the module will be called ipaq. @@ -334,7 +334,7 @@ config USB_SERIAL_KLSI adapter sold by Palm Inc. for use with their Palm III and Palm V series PDAs. - Please read <file:Documentation/usb/usb-serial.txt> for more + Please read <file:Documentation/usb/usb-serial.rst> for more information. To compile this driver as a module, choose M here: the diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index c1235d5b9fba..9bb123ab9bc9 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -10,7 +10,7 @@ * and associated source files. Please see the usb/serial files for * individual credits and copyrights. * - * See Documentation/usb/usb-serial.txt for more information on using this + * See Documentation/usb/usb-serial.rst for more information on using this * driver * * TODO: diff --git a/drivers/usb/serial/belkin_sa.h b/drivers/usb/serial/belkin_sa.h index 51bc06287603..a13a98d284f2 100644 --- a/drivers/usb/serial/belkin_sa.h +++ b/drivers/usb/serial/belkin_sa.h @@ -9,7 +9,7 @@ * and associated source files. Please see the usb/serial files for * individual credits and copyrights. * - * See Documentation/usb/usb-serial.txt for more information on using this + * See Documentation/usb/usb-serial.rst for more information on using this * driver * * 12-Mar-2001 gkh diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 72d3ae1ebc64..216edd5826ca 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -7,7 +7,7 @@ * Copyright (C) 2003,2004 * Neil Whelchel (koyama@firstlight.net) * - * See Documentation/usb/usb-serial.txt for more information on using this + * See Documentation/usb/usb-serial.rst for more information on using this * driver * * See http://geocities.com/i0xox0i for information on this driver and the diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index d680bec62547..405e835e93dd 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -8,7 +8,7 @@ * Copyright (C) 1999 - 2001 * Greg Kroah-Hartman (greg@kroah.com) * - * See Documentation/usb/usb-serial.txt for more information on using this + * See Documentation/usb/usb-serial.rst for more information on using this * driver */ diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 1d8461ae2c34..4b3a049561f3 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -10,7 +10,7 @@ * Copyright (C) 2002 * Kuba Ober (kuba@mareimbrium.org) * - * See Documentation/usb/usb-serial.txt for more information on using this + * See Documentation/usb/usb-serial.rst for more information on using this * driver * * See http://ftdi-usb-sio.sourceforge.net for up to date testing info @@ -1029,6 +1029,7 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(AIRBUS_DS_VID, AIRBUS_DS_P8GR) }, /* EZPrototypes devices */ { USB_DEVICE(EZPROTOTYPES_VID, HJELMSLUND_USB485_ISO_PID) }, + { USB_DEVICE_INTERFACE_NUMBER(UNJO_VID, UNJO_ISODEBUG_V1_PID, 1) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 5755f0df0025..f12d806220b4 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -1543,3 +1543,9 @@ #define CHETCO_SEASMART_DISPLAY_PID 0xA5AD /* SeaSmart NMEA2000 Display */ #define CHETCO_SEASMART_LITE_PID 0xA5AE /* SeaSmart Lite USB Adapter */ #define CHETCO_SEASMART_ANALOG_PID 0xA5AF /* SeaSmart Analog Adapter */ + +/* + * Unjo AB + */ +#define UNJO_VID 0x22B7 +#define UNJO_ISODEBUG_V1_PID 0x150D diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index 7643716b5299..302eb9530859 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -16,7 +16,7 @@ * was written by Roman Weissgaerber <weissg@vienna.at>, Dag Brattli * <dag@brattli.net>, and Jean Tourrilhes <jt@hpl.hp.com> * - * See Documentation/usb/usb-serial.txt for more information on using this + * See Documentation/usb/usb-serial.rst for more information on using this * driver */ diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 38d43c4b7ce5..bf988f77d400 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -6,7 +6,7 @@ * Copyright (C) 1999, 2000 Brian Warner <warner@lothar.com> * Copyright (C) 2000 Al Borchers <borchers@steinerpoint.com> * - * See Documentation/usb/usb-serial.txt for more information on using this + * See Documentation/usb/usb-serial.rst for more information on using this * driver */ diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index e51c9464ea42..5b6e982a9376 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -4,7 +4,7 @@ * * Copyright (C) 2013,2017 Johan Hovold <johan@kernel.org> * - * See Documentation/usb/usb-serial.txt for more information on using this + * See Documentation/usb/usb-serial.rst for more information on using this * driver * * Please report both successes and troubles to the author at omninet@kroah.com diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index a0aaf0635359..c1582fbd1150 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1343,6 +1343,7 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0414, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0417, 0xff, 0xff, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(ZTE_VENDOR_ID, 0x0601, 0xff) }, /* GosunCn ZTE WeLink ME3630 (RNDIS mode) */ { USB_DEVICE_INTERFACE_CLASS(ZTE_VENDOR_ID, 0x0602, 0xff) }, /* GosunCn ZTE WeLink ME3630 (MBIM mode) */ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff), .driver_info = RSVD(4) }, diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index 38ae0fc826cc..8151dd7a45e8 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -22,7 +22,7 @@ * So, THIS CODE CAN DESTROY OTi-6858 AND ANY OTHER DEVICES, THAT ARE * CONNECTED TO IT! * - * See Documentation/usb/usb-serial.txt for more information on using this + * See Documentation/usb/usb-serial.rst for more information on using this * driver * * TODO: diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index d7abde14b3cf..9d27b76c5c6e 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -7,7 +7,7 @@ * * Original driver for 2.2.x by anonymous * - * See Documentation/usb/usb-serial.txt for more information on using this + * See Documentation/usb/usb-serial.rst for more information on using this * driver */ diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 676c296103a2..a3179fea38c8 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -10,7 +10,7 @@ * This driver was originally based on the ACM driver by Armin Fuerst (which was * based on a driver by Brad Keryan) * - * See Documentation/usb/usb-serial.txt for more information on using this + * See Documentation/usb/usb-serial.rst for more information on using this * driver */ diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 8ddbecc25d89..4412834db21c 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -6,7 +6,7 @@ * Copyright (C) 1999 - 2004 * Greg Kroah-Hartman (greg@kroah.com) * - * See Documentation/usb/usb-serial.txt for more information on using this + * See Documentation/usb/usb-serial.rst for more information on using this * driver * */ diff --git a/drivers/usb/serial/visor.h b/drivers/usb/serial/visor.h index fe290243f1ce..4bd69d047036 100644 --- a/drivers/usb/serial/visor.h +++ b/drivers/usb/serial/visor.h @@ -5,7 +5,7 @@ * Copyright (C) 1999 - 2003 * Greg Kroah-Hartman (greg@kroah.com) * - * See Documentation/usb/usb-serial.txt for more information on using this + * See Documentation/usb/usb-serial.rst for more information on using this * driver. * */ diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index aefd84f88b59..79314d8c94a4 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -8,7 +8,7 @@ * Copyright (C) 1999 - 2001 * Greg Kroah-Hartman (greg@kroah.com) * - * See Documentation/usb/usb-serial.txt for more information on using this + * See Documentation/usb/usb-serial.rst for more information on using this * driver */ diff --git a/drivers/usb/serial/whiteheat.h b/drivers/usb/serial/whiteheat.h index 72c1b0cf4063..00398149cd8d 100644 --- a/drivers/usb/serial/whiteheat.h +++ b/drivers/usb/serial/whiteheat.h @@ -8,7 +8,7 @@ * Copyright (C) 1999, 2000 * Greg Kroah-Hartman (greg@kroah.com) * - * See Documentation/usb/usb-serial.txt for more information on using this + * See Documentation/usb/usb-serial.rst for more information on using this * driver * */ diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index 59190d88fa9f..30790240aec6 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -195,8 +195,11 @@ static int slave_configure(struct scsi_device *sdev) */ sdev->skip_ms_page_8 = 1; - /* Some devices don't handle VPD pages correctly */ - sdev->skip_vpd_pages = 1; + /* + * Some devices don't handle VPD pages correctly, so skip vpd + * pages if not forced by SCSI layer. + */ + sdev->skip_vpd_pages = !sdev->try_vpd_pages; /* Do not attempt to use REPORT SUPPORTED OPERATION CODES */ sdev->no_report_opcodes = 1; diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c index 7302f7501ec9..c524088246ee 100644 --- a/drivers/usb/typec/tcpm/fusb302.c +++ b/drivers/usb/typec/tcpm/fusb302.c @@ -1697,13 +1697,12 @@ static int fusb302_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct fusb302_chip *chip; - struct i2c_adapter *adapter; + struct i2c_adapter *adapter = client->adapter; struct device *dev = &client->dev; const char *name; int ret = 0; u32 v; - adapter = to_i2c_adapter(client->dev.parent); if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) { dev_err(&client->dev, "I2C/SMBus block functionality not supported!\n"); diff --git a/drivers/usb/typec/tps6598x.c b/drivers/usb/typec/tps6598x.c index c674abe3cf99..a38d1409f15b 100644 --- a/drivers/usb/typec/tps6598x.c +++ b/drivers/usb/typec/tps6598x.c @@ -41,7 +41,7 @@ #define TPS_STATUS_VCONN(s) (!!((s) & BIT(7))) /* TPS_REG_SYSTEM_CONF bits */ -#define TPS_SYSCONF_PORTINFO(c) ((c) & 3) +#define TPS_SYSCONF_PORTINFO(c) ((c) & 7) enum { TPS_PORTINFO_SINK, @@ -127,7 +127,7 @@ tps6598x_block_read(struct tps6598x *tps, u8 reg, void *val, size_t len) } static int tps6598x_block_write(struct tps6598x *tps, u8 reg, - void *val, size_t len) + const void *val, size_t len) { u8 data[TPS_MAX_LEN + 1]; @@ -173,7 +173,7 @@ static inline int tps6598x_write64(struct tps6598x *tps, u8 reg, u64 val) static inline int tps6598x_write_4cc(struct tps6598x *tps, u8 reg, const char *val) { - return tps6598x_block_write(tps, reg, &val, sizeof(u32)); + return tps6598x_block_write(tps, reg, val, 4); } static int tps6598x_read_partner_identity(struct tps6598x *tps) diff --git a/drivers/usb/usbip/stub_main.c b/drivers/usb/usbip/stub_main.c index bf8a5feb0ee9..2e4bfccd4bfc 100644 --- a/drivers/usb/usbip/stub_main.c +++ b/drivers/usb/usbip/stub_main.c @@ -201,7 +201,7 @@ static DRIVER_ATTR_RW(match_busid); static int do_rebind(char *busid, struct bus_id_priv *busid_priv) { - int ret; + int ret = 0; /* device_attach() callers should hold parent lock for USB */ if (busid_priv->udev->dev.parent) @@ -209,11 +209,9 @@ static int do_rebind(char *busid, struct bus_id_priv *busid_priv) ret = device_attach(&busid_priv->udev->dev); if (busid_priv->udev->dev.parent) device_unlock(busid_priv->udev->dev.parent); - if (ret < 0) { + if (ret < 0) dev_err(&busid_priv->udev->dev, "rebind failed\n"); - return ret; - } - return 0; + return ret; } static void stub_device_rebind(void) diff --git a/drivers/usb/usbip/vhci_tx.c b/drivers/usb/usbip/vhci_tx.c index 9aed15a358b7..2fa26d0578d7 100644 --- a/drivers/usb/usbip/vhci_tx.c +++ b/drivers/usb/usbip/vhci_tx.c @@ -144,16 +144,14 @@ static int vhci_send_cmd_unlink(struct vhci_device *vdev) struct vhci_unlink *unlink = NULL; struct msghdr msg; - struct kvec iov[3]; + struct kvec iov; size_t txsize; - size_t total_size = 0; while ((unlink = dequeue_from_unlink_tx(vdev)) != NULL) { int ret; struct usbip_header pdu_header; - txsize = 0; memset(&pdu_header, 0, sizeof(pdu_header)); memset(&msg, 0, sizeof(msg)); memset(&iov, 0, sizeof(iov)); @@ -169,11 +167,11 @@ static int vhci_send_cmd_unlink(struct vhci_device *vdev) usbip_header_correct_endian(&pdu_header, 1); - iov[0].iov_base = &pdu_header; - iov[0].iov_len = sizeof(pdu_header); - txsize += sizeof(pdu_header); + iov.iov_base = &pdu_header; + iov.iov_len = sizeof(pdu_header); + txsize = sizeof(pdu_header); - ret = kernel_sendmsg(vdev->ud.tcp_socket, &msg, iov, 1, txsize); + ret = kernel_sendmsg(vdev->ud.tcp_socket, &msg, &iov, 1, txsize); if (ret != txsize) { pr_err("sendmsg failed!, ret=%d for %zd\n", ret, txsize); diff --git a/drivers/usb/wusbcore/Kconfig b/drivers/usb/wusbcore/Kconfig index 12e89189ca7d..abc0f361021f 100644 --- a/drivers/usb/wusbcore/Kconfig +++ b/drivers/usb/wusbcore/Kconfig @@ -5,11 +5,9 @@ config USB_WUSB tristate "Enable Wireless USB extensions" depends on UWB - select CRYPTO - select CRYPTO_BLKCIPHER - select CRYPTO_CBC - select CRYPTO_MANAGER - select CRYPTO_AES + select CRYPTO + select CRYPTO_AES + select CRYPTO_CCM help Enable the host-side support for Wireless USB. diff --git a/drivers/usb/wusbcore/crypto.c b/drivers/usb/wusbcore/crypto.c index edb7263bff40..9ee66483ee54 100644 --- a/drivers/usb/wusbcore/crypto.c +++ b/drivers/usb/wusbcore/crypto.c @@ -31,6 +31,9 @@ * funneled through AES are...16 bytes in size! */ +#include <crypto/aes.h> +#include <crypto/algapi.h> +#include <crypto/hash.h> #include <crypto/skcipher.h> #include <linux/crypto.h> #include <linux/module.h> @@ -109,16 +112,6 @@ struct aes_ccm_a { __be16 counter; /* Value of x */ } __attribute__((packed)); -static void bytewise_xor(void *_bo, const void *_bi1, const void *_bi2, - size_t size) -{ - u8 *bo = _bo; - const u8 *bi1 = _bi1, *bi2 = _bi2; - size_t itr; - for (itr = 0; itr < size; itr++) - bo[itr] = bi1[itr] ^ bi2[itr]; -} - /* Scratch space for MAC calculations. */ struct wusb_mac_scratch { struct aes_ccm_b0 b0; @@ -150,8 +143,7 @@ struct wusb_mac_scratch { * @a: ASCII string, 14 bytes long (I guess zero padded if needed; * we use exactly 14 bytes). * - * @b: data stream to be processed; cannot be a global or const local - * (will confuse the scatterlists) + * @b: data stream to be processed * * @blen: size of b... * @@ -160,16 +152,10 @@ struct wusb_mac_scratch { * @key. We bytewise xor B0 with B1 (1) and AES-crypt that. Then we * take the payload and divide it in blocks (16 bytes), xor them with * the previous crypto result (16 bytes) and crypt it, repeat the next - * block with the output of the previous one, rinse wash (I guess this - * is what AES CBC mode means...but I truly have no idea). So we use - * the CBC(AES) blkcipher, that does precisely that. The IV (Initial + * block with the output of the previous one, rinse wash. So we use + * the CBC-MAC(AES) shash, that does precisely that. The IV (Initial * Vector) is 16 bytes and is set to zero, so * - * See rfc3610. Linux crypto has a CBC implementation, but the - * documentation is scarce, to say the least, and the example code is - * so intricated that is difficult to understand how things work. Most - * of this is guess work -- bite me. - * * (1) Created as 6.5 says, again, using as l(a) 'Blen + 14', and * using the 14 bytes of @a to fill up * b1.{mac_header,e0,security_reserved,padding}. @@ -189,44 +175,24 @@ struct wusb_mac_scratch { * NOTE: blen is not aligned to a block size, we'll pad zeros, that's * what sg[4] is for. Maybe there is a smarter way to do this. */ -static int wusb_ccm_mac(struct crypto_sync_skcipher *tfm_cbc, - struct crypto_cipher *tfm_aes, +static int wusb_ccm_mac(struct crypto_shash *tfm_cbcmac, struct wusb_mac_scratch *scratch, void *mic, const struct aes_ccm_nonce *n, const struct aes_ccm_label *a, const void *b, size_t blen) { - int result = 0; - SYNC_SKCIPHER_REQUEST_ON_STACK(req, tfm_cbc); - struct scatterlist sg[4], sg_dst; - void *dst_buf; - size_t dst_size; - u8 *iv; - size_t zero_padding; + SHASH_DESC_ON_STACK(desc, tfm_cbcmac); + u8 iv[AES_BLOCK_SIZE]; /* * These checks should be compile time optimized out * ensure @a fills b1's mac_header and following fields */ - WARN_ON(sizeof(*a) != sizeof(scratch->b1) - sizeof(scratch->b1.la)); - WARN_ON(sizeof(scratch->b0) != sizeof(struct aes_ccm_block)); - WARN_ON(sizeof(scratch->b1) != sizeof(struct aes_ccm_block)); - WARN_ON(sizeof(scratch->ax) != sizeof(struct aes_ccm_block)); - - result = -ENOMEM; - zero_padding = blen % sizeof(struct aes_ccm_block); - if (zero_padding) - zero_padding = sizeof(struct aes_ccm_block) - zero_padding; - dst_size = blen + sizeof(scratch->b0) + sizeof(scratch->b1) + - zero_padding; - dst_buf = kzalloc(dst_size, GFP_KERNEL); - if (!dst_buf) - goto error_dst_buf; - - iv = kzalloc(crypto_sync_skcipher_ivsize(tfm_cbc), GFP_KERNEL); - if (!iv) - goto error_iv; + BUILD_BUG_ON(sizeof(*a) != sizeof(scratch->b1) - sizeof(scratch->b1.la)); + BUILD_BUG_ON(sizeof(scratch->b0) != sizeof(struct aes_ccm_block)); + BUILD_BUG_ON(sizeof(scratch->b1) != sizeof(struct aes_ccm_block)); + BUILD_BUG_ON(sizeof(scratch->ax) != sizeof(struct aes_ccm_block)); /* Setup B0 */ scratch->b0.flags = 0x59; /* Format B0 */ @@ -243,46 +209,28 @@ static int wusb_ccm_mac(struct crypto_sync_skcipher *tfm_cbc, scratch->b1.la = cpu_to_be16(blen + 14); memcpy(&scratch->b1.mac_header, a, sizeof(*a)); - sg_init_table(sg, ARRAY_SIZE(sg)); - sg_set_buf(&sg[0], &scratch->b0, sizeof(scratch->b0)); - sg_set_buf(&sg[1], &scratch->b1, sizeof(scratch->b1)); - sg_set_buf(&sg[2], b, blen); - /* 0 if well behaved :) */ - sg_set_page(&sg[3], ZERO_PAGE(0), zero_padding, 0); - sg_init_one(&sg_dst, dst_buf, dst_size); - - skcipher_request_set_sync_tfm(req, tfm_cbc); - skcipher_request_set_callback(req, 0, NULL, NULL); - skcipher_request_set_crypt(req, sg, &sg_dst, dst_size, iv); - result = crypto_skcipher_encrypt(req); - skcipher_request_zero(req); - if (result < 0) { - printk(KERN_ERR "E: can't compute CBC-MAC tag (MIC): %d\n", - result); - goto error_cbc_crypt; - } + desc->tfm = tfm_cbcmac; + crypto_shash_init(desc); + crypto_shash_update(desc, (u8 *)&scratch->b0, sizeof(scratch->b0) + + sizeof(scratch->b1)); + crypto_shash_finup(desc, b, blen, iv); /* Now we crypt the MIC Tag (*iv) with Ax -- values per WUSB1.0[6.5] * The procedure is to AES crypt the A0 block and XOR the MIC * Tag against it; we only do the first 8 bytes and place it * directly in the destination buffer. - * - * POS Crypto API: size is assumed to be AES's block size. - * Thanks for documenting it -- tip taken from airo.c */ scratch->ax.flags = 0x01; /* as per WUSB 1.0 spec */ scratch->ax.ccm_nonce = *n; scratch->ax.counter = 0; - crypto_cipher_encrypt_one(tfm_aes, (void *)&scratch->ax, - (void *)&scratch->ax); - bytewise_xor(mic, &scratch->ax, iv, 8); - result = 8; -error_cbc_crypt: - kfree(iv); -error_iv: - kfree(dst_buf); -error_dst_buf: - return result; + + /* reuse the CBC-MAC transform to perform the single block encryption */ + crypto_shash_digest(desc, (u8 *)&scratch->ax, sizeof(scratch->ax), + (u8 *)&scratch->ax); + + crypto_xor_cpy(mic, (u8 *)&scratch->ax, iv, 8); + + return 8; } /* @@ -298,45 +246,28 @@ ssize_t wusb_prf(void *out, size_t out_size, { ssize_t result, bytes = 0, bitr; struct aes_ccm_nonce n = *_n; - struct crypto_sync_skcipher *tfm_cbc; - struct crypto_cipher *tfm_aes; - struct wusb_mac_scratch *scratch; + struct crypto_shash *tfm_cbcmac; + struct wusb_mac_scratch scratch; u64 sfn = 0; __le64 sfn_le; - tfm_cbc = crypto_alloc_sync_skcipher("cbc(aes)", 0, 0); - if (IS_ERR(tfm_cbc)) { - result = PTR_ERR(tfm_cbc); - printk(KERN_ERR "E: can't load CBC(AES): %d\n", (int)result); - goto error_alloc_cbc; - } - result = crypto_sync_skcipher_setkey(tfm_cbc, key, 16); - if (result < 0) { - printk(KERN_ERR "E: can't set CBC key: %d\n", (int)result); - goto error_setkey_cbc; + tfm_cbcmac = crypto_alloc_shash("cbcmac(aes)", 0, 0); + if (IS_ERR(tfm_cbcmac)) { + result = PTR_ERR(tfm_cbcmac); + printk(KERN_ERR "E: can't load CBCMAC-AES: %d\n", (int)result); + goto error_alloc_cbcmac; } - tfm_aes = crypto_alloc_cipher("aes", 0, 0); - if (IS_ERR(tfm_aes)) { - result = PTR_ERR(tfm_aes); - printk(KERN_ERR "E: can't load AES: %d\n", (int)result); - goto error_alloc_aes; - } - result = crypto_cipher_setkey(tfm_aes, key, 16); + result = crypto_shash_setkey(tfm_cbcmac, key, AES_BLOCK_SIZE); if (result < 0) { - printk(KERN_ERR "E: can't set AES key: %d\n", (int)result); - goto error_setkey_aes; - } - scratch = kmalloc(sizeof(*scratch), GFP_KERNEL); - if (!scratch) { - result = -ENOMEM; - goto error_alloc_scratch; + printk(KERN_ERR "E: can't set CBCMAC-AES key: %d\n", (int)result); + goto error_setkey_cbcmac; } for (bitr = 0; bitr < (len + 63) / 64; bitr++) { sfn_le = cpu_to_le64(sfn++); memcpy(&n.sfn, &sfn_le, sizeof(n.sfn)); /* n.sfn++... */ - result = wusb_ccm_mac(tfm_cbc, tfm_aes, scratch, out + bytes, + result = wusb_ccm_mac(tfm_cbcmac, &scratch, out + bytes, &n, a, b, blen); if (result < 0) goto error_ccm_mac; @@ -344,15 +275,10 @@ ssize_t wusb_prf(void *out, size_t out_size, } result = bytes; - kfree(scratch); -error_alloc_scratch: error_ccm_mac: -error_setkey_aes: - crypto_free_cipher(tfm_aes); -error_alloc_aes: -error_setkey_cbc: - crypto_free_sync_skcipher(tfm_cbc); -error_alloc_cbc: +error_setkey_cbcmac: + crypto_free_shash(tfm_cbcmac); +error_alloc_cbcmac: return result; } @@ -377,12 +303,8 @@ static int wusb_oob_mic_verify(void) { int result; u8 mic[8]; - /* WUSB1.0[A.2] test vectors - * - * Need to keep it in the local stack as GCC 4.1.3something - * messes up and generates noise. - */ - struct usb_handshake stv_hsmic_hs = { + /* WUSB1.0[A.2] test vectors */ + static const struct usb_handshake stv_hsmic_hs = { .bMessageNumber = 2, .bStatus = 00, .tTKID = { 0x76, 0x98, 0x01 }, @@ -457,11 +379,8 @@ static int wusb_key_derive_verify(void) { int result = 0; struct wusb_keydvt_out keydvt_out; - /* These come from WUSB1.0[A.1] + 2006/12 errata - * NOTE: can't make this const or global -- somehow it seems - * the scatterlists for crypto get confused and we get - * bad data. There is no doc on this... */ - struct wusb_keydvt_in stv_keydvt_in_a1 = { + /* These come from WUSB1.0[A.1] + 2006/12 errata */ + static const struct wusb_keydvt_in stv_keydvt_in_a1 = { .hnonce = { 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h index cb2b46f57af3..5d231ce8709b 100644 --- a/include/linux/fsl_devices.h +++ b/include/linux/fsl_devices.h @@ -98,6 +98,7 @@ struct fsl_usb2_platform_data { unsigned has_fsl_erratum_14:1; unsigned has_fsl_erratum_a005275:1; unsigned has_fsl_erratum_a005697:1; + unsigned has_fsl_erratum_a006918:1; unsigned check_phy_clk_valid:1; /* register save area for suspend/resume */ diff --git a/include/linux/usb.h b/include/linux/usb.h index ae82d9d1112b..83d35d993e8c 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -578,6 +578,7 @@ struct usb3_lpm_parameters { * @bus_mA: Current available from the bus * @portnum: parent port number (origin 1) * @level: number of USB hub ancestors + * @devaddr: device address, XHCI: assigned by HW, others: same as devnum * @can_submit: URBs may be submitted * @persist_enabled: USB_PERSIST enabled for this device * @have_langid: whether string_langid is valid @@ -661,6 +662,7 @@ struct usb_device { unsigned short bus_mA; u8 portnum; u8 level; + u8 devaddr; unsigned can_submit:1; unsigned persist_enabled:1; diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h index 911e05af671e..edd89b7c8f18 100644 --- a/include/linux/usb/chipidea.h +++ b/include/linux/usb/chipidea.h @@ -61,6 +61,7 @@ struct ci_hdrc_platform_data { #define CI_HDRC_OVERRIDE_PHY_CONTROL BIT(12) /* Glue layer manages phy */ #define CI_HDRC_REQUIRES_ALIGNED_DMA BIT(13) #define CI_HDRC_IMX_IS_HSIC BIT(14) +#define CI_HDRC_PMQOS BIT(15) enum usb_dr_mode dr_mode; #define CI_HDRC_CONTROLLER_RESET_EVENT 0 #define CI_HDRC_CONTROLLER_STOPPED_EVENT 1 diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 7595056b96c1..fb19141151d8 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -310,7 +310,8 @@ struct usb_gadget_ops { int (*pullup) (struct usb_gadget *, int is_on); int (*ioctl)(struct usb_gadget *, unsigned code, unsigned long param); - void (*get_config_params)(struct usb_dcd_config_params *); + void (*get_config_params)(struct usb_gadget *, + struct usb_dcd_config_params *); int (*udc_start)(struct usb_gadget *, struct usb_gadget_driver *); int (*udc_stop)(struct usb_gadget *); diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h index 53924f8e840c..6914475bbc86 100644 --- a/include/linux/usb/renesas_usbhs.h +++ b/include/linux/usb/renesas_usbhs.h @@ -3,6 +3,7 @@ * Renesas USB * * Copyright (C) 2011 Renesas Solutions Corp. + * Copyright (C) 2019 Renesas Electronics Corporation * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> * * This program is distributed in the hope that it will be useful, @@ -33,17 +34,6 @@ enum { }; /* - * callback functions table for driver - * - * These functions are called from platform for driver. - * Callback function's pointer will be set before - * renesas_usbhs_platform_callback :: hardware_init was called - */ -struct renesas_usbhs_driver_callback { - int (*notify_hotplug)(struct platform_device *pdev); -}; - -/* * callback functions for platform * * These functions are called from driver for platform @@ -180,23 +170,20 @@ struct renesas_usbhs_driver_param { */ int pio_dma_border; /* default is 64byte */ - uintptr_t type; u32 enable_gpio; /* * option: */ - u32 has_otg:1; /* for controlling PWEN/EXTLP */ - u32 has_sudmac:1; /* for SUDMAC */ u32 has_usb_dmac:1; /* for USB-DMAC */ + u32 runtime_pwctrl:1; + u32 has_cnen:1; + u32 cfifo_byte_addr:1; /* CFIFO is byte addressable */ #define USBHS_USB_DMAC_XFER_SIZE 32 /* hardcode the xfer size */ + u32 multi_clks:1; + u32 has_new_pipe_configs:1; }; -#define USBHS_TYPE_RCAR_GEN2 1 -#define USBHS_TYPE_RCAR_GEN3 2 -#define USBHS_TYPE_RCAR_GEN3_WITH_PLL 3 -#define USBHS_TYPE_RZA1 4 - /* * option: * @@ -212,12 +199,6 @@ struct renesas_usbhs_platform_info { struct renesas_usbhs_platform_callback platform_callback; /* - * driver set these callback functions pointer. - * platform can use it on callback functions - */ - struct renesas_usbhs_driver_callback driver_callback; - - /* * option: * * driver use these param for some register @@ -230,12 +211,4 @@ struct renesas_usbhs_platform_info { */ #define renesas_usbhs_get_info(pdev)\ ((struct renesas_usbhs_platform_info *)(pdev)->dev.platform_data) - -#define renesas_usbhs_call_notify_hotplug(pdev) \ - ({ \ - struct renesas_usbhs_driver_callback *dc; \ - dc = &(renesas_usbhs_get_info(pdev)->driver_callback); \ - if (dc && dc->notify_hotplug) \ - dc->notify_hotplug(pdev); \ - }) #endif /* RENESAS_USB_H */ diff --git a/include/uapi/linux/usbdevice_fs.h b/include/uapi/linux/usbdevice_fs.h index 964e87217be4..78efe870c2b7 100644 --- a/include/uapi/linux/usbdevice_fs.h +++ b/include/uapi/linux/usbdevice_fs.h @@ -76,6 +76,26 @@ struct usbdevfs_connectinfo { unsigned char slow; }; +struct usbdevfs_conninfo_ex { + __u32 size; /* Size of the structure from the kernel's */ + /* point of view. Can be used by userspace */ + /* to determine how much data can be */ + /* used/trusted. */ + __u32 busnum; /* USB bus number, as enumerated by the */ + /* kernel, the device is connected to. */ + __u32 devnum; /* Device address on the bus. */ + __u32 speed; /* USB_SPEED_* constants from ch9.h */ + __u8 num_ports; /* Number of ports the device is connected */ + /* to on the way to the root hub. It may */ + /* be bigger than size of 'ports' array so */ + /* userspace can detect overflows. */ + __u8 ports[7]; /* List of ports on the way from the root */ + /* hub to the device. Current limit in */ + /* USB specification is 7 tiers (root hub, */ + /* 5 intermediate hubs, device), which */ + /* gives at most 6 port entries. */ +}; + #define USBDEVFS_URB_SHORT_NOT_OK 0x01 #define USBDEVFS_URB_ISO_ASAP 0x02 #define USBDEVFS_URB_BULK_CONTINUATION 0x04 @@ -137,6 +157,7 @@ struct usbdevfs_hub_portinfo { #define USBDEVFS_CAP_REAP_AFTER_DISCONNECT 0x10 #define USBDEVFS_CAP_MMAP 0x20 #define USBDEVFS_CAP_DROP_PRIVILEGES 0x40 +#define USBDEVFS_CAP_CONNINFO_EX 0x80 /* USBDEVFS_DISCONNECT_CLAIM flags & struct */ @@ -197,5 +218,10 @@ struct usbdevfs_streams { #define USBDEVFS_FREE_STREAMS _IOR('U', 29, struct usbdevfs_streams) #define USBDEVFS_DROP_PRIVILEGES _IOW('U', 30, __u32) #define USBDEVFS_GET_SPEED _IO('U', 31) +/* + * Returns struct usbdevfs_conninfo_ex; length is variable to allow + * extending size of the data returned. + */ +#define USBDEVFS_CONNINFO_EX(len) _IOC(_IOC_READ, 'U', 32, len) #endif /* _UAPI_LINUX_USBDEVICE_FS_H */ |