diff options
-rw-r--r-- | Documentation/devicetree/bindings/pci/mediatek,mt7623-pcie.txt | 130 | ||||
-rw-r--r-- | MAINTAINERS | 8 | ||||
-rw-r--r-- | drivers/pci/host/Kconfig | 11 | ||||
-rw-r--r-- | drivers/pci/host/Makefile | 1 | ||||
-rw-r--r-- | drivers/pci/host/pcie-mediatek.c | 554 |
5 files changed, 704 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pci/mediatek,mt7623-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek,mt7623-pcie.txt new file mode 100644 index 000000000000..fe80dda9bf73 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/mediatek,mt7623-pcie.txt @@ -0,0 +1,130 @@ +MediaTek Gen2 PCIe controller which is available on MT7623 series SoCs + +PCIe subsys supports single root complex (RC) with 3 Root Ports. Each root +ports supports a Gen2 1-lane Link and has PIPE interface to PHY. + +Required properties: +- compatible: Should contain "mediatek,mt7623-pcie". +- device_type: Must be "pci" +- reg: Base addresses and lengths of the PCIe controller. +- #address-cells: Address representation for root ports (must be 3) +- #size-cells: Size representation for root ports (must be 2) +- #interrupt-cells: Size representation for interrupts (must be 1) +- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties + Please refer to the standard PCI bus binding document for a more detailed + explanation. +- clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: Must include the following entries: + - free_ck :for reference clock of PCIe subsys + - sys_ck0 :for clock of Port0 + - sys_ck1 :for clock of Port1 + - sys_ck2 :for clock of Port2 +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following entries: + - pcie-rst0 :port0 reset + - pcie-rst1 :port1 reset + - pcie-rst2 :port2 reset +- phys: List of PHY specifiers (used by generic PHY framework). +- phy-names : Must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the + number of PHYs as specified in *phys* property. +- power-domains: A phandle and power domain specifier pair to the power domain + which is responsible for collapsing and restoring power to the peripheral. +- bus-range: Range of bus numbers associated with this controller. +- ranges: Ranges for the PCI memory and I/O regions. + +In addition, the device tree node must have sub-nodes describing each +PCIe port interface, having the following mandatory properties: + +Required properties: +- device_type: Must be "pci" +- reg: Only the first four bytes are used to refer to the correct bus number + and device number. +- #address-cells: Must be 3 +- #size-cells: Must be 2 +- #interrupt-cells: Must be 1 +- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties + Please refer to the standard PCI bus binding document for a more detailed + explanation. +- ranges: Sub-ranges distributed from the PCIe controller node. An empty + property is sufficient. +- num-lanes: Number of lanes to use for this port. + +Examples: + + hifsys: syscon@1a000000 { + compatible = "mediatek,mt7623-hifsys", + "mediatek,mt2701-hifsys", + "syscon"; + reg = <0 0x1a000000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pcie: pcie-controller@1a140000 { + compatible = "mediatek,mt7623-pcie"; + device_type = "pci"; + reg = <0 0x1a140000 0 0x1000>, /* PCIe shared registers */ + <0 0x1a142000 0 0x1000>, /* Port0 registers */ + <0 0x1a143000 0 0x1000>, /* Port1 registers */ + <0 0x1a144000 0 0x1000>; /* Port2 registers */ + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 0>; + interrupt-map = <0x0000 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>, + <0x0800 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>, + <0x1000 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_ETHIF_SEL>, + <&hifsys CLK_HIFSYS_PCIE0>, + <&hifsys CLK_HIFSYS_PCIE1>, + <&hifsys CLK_HIFSYS_PCIE2>; + clock-names = "free_ck", "sys_ck0", "sys_ck1", "sys_ck2"; + resets = <&hifsys MT2701_HIFSYS_PCIE0_RST>, + <&hifsys MT2701_HIFSYS_PCIE1_RST>, + <&hifsys MT2701_HIFSYS_PCIE2_RST>; + reset-names = "pcie-rst0", "pcie-rst1", "pcie-rst2"; + phys = <&pcie0_phy>, <&pcie1_phy>, <&pcie2_phy>; + phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>; + bus-range = <0x00 0xff>; + ranges = <0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000 /* I/O space */ + 0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>; /* memory space */ + + pcie@0,0 { + device_type = "pci"; + reg = <0x0000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>; + ranges; + num-lanes = <1>; + }; + + pcie@1,0 { + device_type = "pci"; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>; + ranges; + num-lanes = <1>; + }; + + pcie@2,0 { + device_type = "pci"; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>; + ranges; + num-lanes = <1>; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 3a9f9d3db437..ed26c0b2eeb5 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9965,6 +9965,14 @@ S: Supported F: Documentation/devicetree/bindings/pci/pci-thunder-* F: drivers/pci/host/pci-thunder-* +PCIE DRIVER FOR MEDIATEK +M: Ryder Lee <ryder.lee@mediatek.com> +L: linux-pci@vger.kernel.org +L: linux-mediatek@lists.infradead.org +S: Supported +F: Documentation/devicetree/bindings/pci/mediatek* +F: drivers/pci/host/*mediatek* + PCMCIA SUBSYSTEM P: Linux PCMCIA Team L: linux-pcmcia@lists.infradead.org diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig index 7f47cd5e10a5..0cd5b30dccb1 100644 --- a/drivers/pci/host/Kconfig +++ b/drivers/pci/host/Kconfig @@ -180,6 +180,17 @@ config PCIE_ROCKCHIP There is 1 internal PCIe port available to support GEN2 with 4 slots. +config PCIE_MEDIATEK + bool "MediaTek PCIe controller" + depends on ARM && (ARCH_MEDIATEK || COMPILE_TEST) + depends on OF + depends on PCI + select PCIEPORTBUS + help + Say Y here if you want to enable PCIe controller support on + MT7623 series SoCs. There is one single root complex with 3 root + ports available. Each port supports Gen2 lane x1. + config VMD depends on PCI_MSI && X86_64 && SRCU tristate "Intel Volume Management Device Driver" diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile index cab879578003..b10d104c85fd 100644 --- a/drivers/pci/host/Makefile +++ b/drivers/pci/host/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o obj-$(CONFIG_PCIE_ROCKCHIP) += pcie-rockchip.o +obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o obj-$(CONFIG_VMD) += vmd.o # The following drivers are for devices that use the generic ACPI diff --git a/drivers/pci/host/pcie-mediatek.c b/drivers/pci/host/pcie-mediatek.c new file mode 100644 index 000000000000..5a9d8589ea0b --- /dev/null +++ b/drivers/pci/host/pcie-mediatek.c @@ -0,0 +1,554 @@ +/* + * MediaTek PCIe host controller driver. + * + * Copyright (c) 2017 MediaTek Inc. + * Author: Ryder Lee <ryder.lee@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/of_address.h> +#include <linux/of_pci.h> +#include <linux/of_platform.h> +#include <linux/pci.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/reset.h> + +/* PCIe shared registers */ +#define PCIE_SYS_CFG 0x00 +#define PCIE_INT_ENABLE 0x0c +#define PCIE_CFG_ADDR 0x20 +#define PCIE_CFG_DATA 0x24 + +/* PCIe per port registers */ +#define PCIE_BAR0_SETUP 0x10 +#define PCIE_CLASS 0x34 +#define PCIE_LINK_STATUS 0x50 + +#define PCIE_PORT_INT_EN(x) BIT(20 + (x)) +#define PCIE_PORT_PERST(x) BIT(1 + (x)) +#define PCIE_PORT_LINKUP BIT(0) +#define PCIE_BAR_MAP_MAX GENMASK(31, 16) + +#define PCIE_BAR_ENABLE BIT(0) +#define PCIE_REVISION_ID BIT(0) +#define PCIE_CLASS_CODE (0x60400 << 8) +#define PCIE_CONF_REG(regn) (((regn) & GENMASK(7, 2)) | \ + ((((regn) >> 8) & GENMASK(3, 0)) << 24)) +#define PCIE_CONF_FUN(fun) (((fun) << 8) & GENMASK(10, 8)) +#define PCIE_CONF_DEV(dev) (((dev) << 11) & GENMASK(15, 11)) +#define PCIE_CONF_BUS(bus) (((bus) << 16) & GENMASK(23, 16)) +#define PCIE_CONF_ADDR(regn, fun, dev, bus) \ + (PCIE_CONF_REG(regn) | PCIE_CONF_FUN(fun) | \ + PCIE_CONF_DEV(dev) | PCIE_CONF_BUS(bus)) + +/* MediaTek specific configuration registers */ +#define PCIE_FTS_NUM 0x70c +#define PCIE_FTS_NUM_MASK GENMASK(15, 8) +#define PCIE_FTS_NUM_L0(x) ((x) & 0xff << 8) + +#define PCIE_FC_CREDIT 0x73c +#define PCIE_FC_CREDIT_MASK (GENMASK(31, 31) | GENMASK(28, 16)) +#define PCIE_FC_CREDIT_VAL(x) ((x) << 16) + +/** + * struct mtk_pcie_port - PCIe port information + * @base: IO mapped register base + * @list: port list + * @pcie: pointer to PCIe host info + * @reset: pointer to port reset control + * @sys_ck: pointer to bus clock + * @phy: pointer to phy control block + * @lane: lane count + * @index: port index + */ +struct mtk_pcie_port { + void __iomem *base; + struct list_head list; + struct mtk_pcie *pcie; + struct reset_control *reset; + struct clk *sys_ck; + struct phy *phy; + u32 lane; + u32 index; +}; + +/** + * struct mtk_pcie - PCIe host information + * @dev: pointer to PCIe device + * @base: IO mapped register base + * @free_ck: free-run reference clock + * @io: IO resource + * @pio: PIO resource + * @mem: non-prefetchable memory resource + * @busn: bus range + * @offset: IO / Memory offset + * @ports: pointer to PCIe port information + */ +struct mtk_pcie { + struct device *dev; + void __iomem *base; + struct clk *free_ck; + + struct resource io; + struct resource pio; + struct resource mem; + struct resource busn; + struct { + resource_size_t mem; + resource_size_t io; + } offset; + struct list_head ports; +}; + +static inline bool mtk_pcie_link_up(struct mtk_pcie_port *port) +{ + return !!(readl(port->base + PCIE_LINK_STATUS) & PCIE_PORT_LINKUP); +} + +static void mtk_pcie_subsys_powerdown(struct mtk_pcie *pcie) +{ + struct device *dev = pcie->dev; + + clk_disable_unprepare(pcie->free_ck); + + if (dev->pm_domain) { + pm_runtime_put_sync(dev); + pm_runtime_disable(dev); + } +} + +static void mtk_pcie_port_free(struct mtk_pcie_port *port) +{ + struct mtk_pcie *pcie = port->pcie; + struct device *dev = pcie->dev; + + devm_iounmap(dev, port->base); + list_del(&port->list); + devm_kfree(dev, port); +} + +static void mtk_pcie_put_resources(struct mtk_pcie *pcie) +{ + struct mtk_pcie_port *port, *tmp; + + list_for_each_entry_safe(port, tmp, &pcie->ports, list) { + phy_power_off(port->phy); + clk_disable_unprepare(port->sys_ck); + mtk_pcie_port_free(port); + } + + mtk_pcie_subsys_powerdown(pcie); +} + +static void __iomem *mtk_pcie_map_bus(struct pci_bus *bus, + unsigned int devfn, int where) +{ + struct pci_host_bridge *host = pci_find_host_bridge(bus); + struct mtk_pcie *pcie = pci_host_bridge_priv(host); + + writel(PCIE_CONF_ADDR(where, PCI_FUNC(devfn), PCI_SLOT(devfn), + bus->number), pcie->base + PCIE_CFG_ADDR); + + return pcie->base + PCIE_CFG_DATA + (where & 3); +} + +static struct pci_ops mtk_pcie_ops = { + .map_bus = mtk_pcie_map_bus, + .read = pci_generic_config_read, + .write = pci_generic_config_write, +}; + +static void mtk_pcie_configure_rc(struct mtk_pcie_port *port) +{ + struct mtk_pcie *pcie = port->pcie; + u32 func = PCI_FUNC(port->index << 3); + u32 slot = PCI_SLOT(port->index << 3); + u32 val; + + /* enable interrupt */ + val = readl(pcie->base + PCIE_INT_ENABLE); + val |= PCIE_PORT_INT_EN(port->index); + writel(val, pcie->base + PCIE_INT_ENABLE); + + /* map to all DDR region. We need to set it before cfg operation. */ + writel(PCIE_BAR_MAP_MAX | PCIE_BAR_ENABLE, + port->base + PCIE_BAR0_SETUP); + + /* configure class code and revision ID */ + writel(PCIE_CLASS_CODE | PCIE_REVISION_ID, port->base + PCIE_CLASS); + + /* configure FC credit */ + writel(PCIE_CONF_ADDR(PCIE_FC_CREDIT, func, slot, 0), + pcie->base + PCIE_CFG_ADDR); + val = readl(pcie->base + PCIE_CFG_DATA); + val &= ~PCIE_FC_CREDIT_MASK; + val |= PCIE_FC_CREDIT_VAL(0x806c); + writel(PCIE_CONF_ADDR(PCIE_FC_CREDIT, func, slot, 0), + pcie->base + PCIE_CFG_ADDR); + writel(val, pcie->base + PCIE_CFG_DATA); + + /* configure RC FTS number to 250 when it leaves L0s */ + writel(PCIE_CONF_ADDR(PCIE_FTS_NUM, func, slot, 0), + pcie->base + PCIE_CFG_ADDR); + val = readl(pcie->base + PCIE_CFG_DATA); + val &= ~PCIE_FTS_NUM_MASK; + val |= PCIE_FTS_NUM_L0(0x50); + writel(PCIE_CONF_ADDR(PCIE_FTS_NUM, func, slot, 0), + pcie->base + PCIE_CFG_ADDR); + writel(val, pcie->base + PCIE_CFG_DATA); +} + +static void mtk_pcie_assert_ports(struct mtk_pcie_port *port) +{ + struct mtk_pcie *pcie = port->pcie; + u32 val; + + /* assert port PERST_N */ + val = readl(pcie->base + PCIE_SYS_CFG); + val |= PCIE_PORT_PERST(port->index); + writel(val, pcie->base + PCIE_SYS_CFG); + + /* de-assert port PERST_N */ + val = readl(pcie->base + PCIE_SYS_CFG); + val &= ~PCIE_PORT_PERST(port->index); + writel(val, pcie->base + PCIE_SYS_CFG); + + /* PCIe v2.0 need at least 100ms delay to train from Gen1 to Gen2 */ + msleep(100); +} + +static void mtk_pcie_enable_ports(struct mtk_pcie_port *port) +{ + struct device *dev = port->pcie->dev; + int err; + + err = clk_prepare_enable(port->sys_ck); + if (err) { + dev_err(dev, "failed to enable port%d clock\n", port->index); + goto err_sys_clk; + } + + reset_control_assert(port->reset); + reset_control_deassert(port->reset); + + err = phy_power_on(port->phy); + if (err) { + dev_err(dev, "failed to power on port%d phy\n", port->index); + goto err_phy_on; + } + + mtk_pcie_assert_ports(port); + + /* if link up, then setup root port configuration space */ + if (mtk_pcie_link_up(port)) { + mtk_pcie_configure_rc(port); + return; + } + + dev_info(dev, "Port%d link down\n", port->index); + + phy_power_off(port->phy); +err_phy_on: + clk_disable_unprepare(port->sys_ck); +err_sys_clk: + mtk_pcie_port_free(port); +} + +static int mtk_pcie_parse_ports(struct mtk_pcie *pcie, + struct device_node *node, + int index) +{ + struct mtk_pcie_port *port; + struct resource *regs; + struct device *dev = pcie->dev; + struct platform_device *pdev = to_platform_device(dev); + char name[10]; + int err; + + port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL); + if (!port) + return -ENOMEM; + + err = of_property_read_u32(node, "num-lanes", &port->lane); + if (err) { + dev_err(dev, "missing num-lanes property\n"); + return err; + } + + regs = platform_get_resource(pdev, IORESOURCE_MEM, index + 1); + port->base = devm_ioremap_resource(dev, regs); + if (IS_ERR(port->base)) { + dev_err(dev, "failed to map port%d base\n", index); + return PTR_ERR(port->base); + } + + snprintf(name, sizeof(name), "sys_ck%d", index); + port->sys_ck = devm_clk_get(dev, name); + if (IS_ERR(port->sys_ck)) { + dev_err(dev, "failed to get port%d clock\n", index); + return PTR_ERR(port->sys_ck); + } + + snprintf(name, sizeof(name), "pcie-rst%d", index); + port->reset = devm_reset_control_get_optional(dev, name); + if (PTR_ERR(port->reset) == -EPROBE_DEFER) + return PTR_ERR(port->reset); + + /* some platforms may use default PHY setting */ + snprintf(name, sizeof(name), "pcie-phy%d", index); + port->phy = devm_phy_optional_get(dev, name); + if (IS_ERR(port->phy)) + return PTR_ERR(port->phy); + + port->index = index; + port->pcie = pcie; + + INIT_LIST_HEAD(&port->list); + list_add_tail(&port->list, &pcie->ports); + + return 0; +} + +static int mtk_pcie_subsys_powerup(struct mtk_pcie *pcie) +{ + struct device *dev = pcie->dev; + struct platform_device *pdev = to_platform_device(dev); + struct resource *regs; + int err; + + /* get shared registers */ + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + pcie->base = devm_ioremap_resource(dev, regs); + if (IS_ERR(pcie->base)) { + dev_err(dev, "failed to map shared register\n"); + return PTR_ERR(pcie->base); + } + + pcie->free_ck = devm_clk_get(dev, "free_ck"); + if (IS_ERR(pcie->free_ck)) { + if (PTR_ERR(pcie->free_ck) == -EPROBE_DEFER) + return -EPROBE_DEFER; + + pcie->free_ck = NULL; + } + + if (dev->pm_domain) { + pm_runtime_enable(dev); + pm_runtime_get_sync(dev); + } + + /* enable top level clock */ + err = clk_prepare_enable(pcie->free_ck); + if (err) { + dev_err(dev, "failed to enable free_ck\n"); + goto err_free_ck; + } + + return 0; + +err_free_ck: + if (dev->pm_domain) { + pm_runtime_put_sync(dev); + pm_runtime_disable(dev); + } + + return err; +} + +static int mtk_pcie_setup(struct mtk_pcie *pcie) +{ + struct device *dev = pcie->dev; + struct device_node *node = dev->of_node, *child; + struct of_pci_range_parser parser; + struct of_pci_range range; + struct resource res; + struct mtk_pcie_port *port, *tmp; + int err; + + if (of_pci_range_parser_init(&parser, node)) { + dev_err(dev, "missing \"ranges\" property\n"); + return -EINVAL; + } + + for_each_of_pci_range(&parser, &range) { + err = of_pci_range_to_resource(&range, node, &res); + if (err < 0) + return err; + + switch (res.flags & IORESOURCE_TYPE_BITS) { + case IORESOURCE_IO: + pcie->offset.io = res.start - range.pci_addr; + + memcpy(&pcie->pio, &res, sizeof(res)); + pcie->pio.name = node->full_name; + + pcie->io.start = range.cpu_addr; + pcie->io.end = range.cpu_addr + range.size - 1; + pcie->io.flags = IORESOURCE_MEM; + pcie->io.name = "I/O"; + + memcpy(&res, &pcie->io, sizeof(res)); + break; + + case IORESOURCE_MEM: + pcie->offset.mem = res.start - range.pci_addr; + + memcpy(&pcie->mem, &res, sizeof(res)); + pcie->mem.name = "non-prefetchable"; + break; + } + } + + err = of_pci_parse_bus_range(node, &pcie->busn); + if (err < 0) { + dev_err(dev, "failed to parse bus ranges property: %d\n", err); + pcie->busn.name = node->name; + pcie->busn.start = 0; + pcie->busn.end = 0xff; + pcie->busn.flags = IORESOURCE_BUS; + } + + for_each_available_child_of_node(node, child) { + int index; + + err = of_pci_get_devfn(child); + if (err < 0) { + dev_err(dev, "failed to parse devfn: %d\n", err); + return err; + } + + index = PCI_SLOT(err); + + err = mtk_pcie_parse_ports(pcie, child, index); + if (err) + return err; + } + + err = mtk_pcie_subsys_powerup(pcie); + if (err) + return err; + + /* enable each port, and then check link status */ + list_for_each_entry_safe(port, tmp, &pcie->ports, list) + mtk_pcie_enable_ports(port); + + /* power down PCIe subsys if slots are all empty (link down) */ + if (list_empty(&pcie->ports)) + mtk_pcie_subsys_powerdown(pcie); + + return 0; +} + +static int mtk_pcie_request_resources(struct mtk_pcie *pcie) +{ + struct pci_host_bridge *host = pci_host_bridge_from_priv(pcie); + struct list_head *windows = &host->windows; + struct device *dev = pcie->dev; + int err; + + pci_add_resource_offset(windows, &pcie->pio, pcie->offset.io); + pci_add_resource_offset(windows, &pcie->mem, pcie->offset.mem); + pci_add_resource(windows, &pcie->busn); + + err = devm_request_pci_bus_resources(dev, windows); + if (err < 0) + return err; + + pci_remap_iospace(&pcie->pio, pcie->io.start); + + return 0; +} + +static int mtk_pcie_register_host(struct pci_host_bridge *host) +{ + struct mtk_pcie *pcie = pci_host_bridge_priv(host); + struct pci_bus *child; + int err; + + host->busnr = pcie->busn.start; + host->dev.parent = pcie->dev; + host->ops = &mtk_pcie_ops; + host->map_irq = of_irq_parse_and_map_pci; + host->swizzle_irq = pci_common_swizzle; + + err = pci_scan_root_bus_bridge(host); + if (err < 0) + return err; + + pci_bus_size_bridges(host->bus); + pci_bus_assign_resources(host->bus); + + list_for_each_entry(child, &host->bus->children, node) + pcie_bus_configure_settings(child); + + pci_bus_add_devices(host->bus); + + return 0; +} + +static int mtk_pcie_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct mtk_pcie *pcie; + struct pci_host_bridge *host; + int err; + + host = devm_pci_alloc_host_bridge(dev, sizeof(*pcie)); + if (!host) + return -ENOMEM; + + pcie = pci_host_bridge_priv(host); + + pcie->dev = dev; + platform_set_drvdata(pdev, pcie); + INIT_LIST_HEAD(&pcie->ports); + + err = mtk_pcie_setup(pcie); + if (err) + return err; + + err = mtk_pcie_request_resources(pcie); + if (err) + goto put_resources; + + err = mtk_pcie_register_host(host); + if (err) + goto put_resources; + + return 0; + +put_resources: + if (!list_empty(&pcie->ports)) + mtk_pcie_put_resources(pcie); + + return err; +} + +static const struct of_device_id mtk_pcie_ids[] = { + { .compatible = "mediatek,mt7623-pcie"}, + { .compatible = "mediatek,mt2701-pcie"}, + {}, +}; + +static struct platform_driver mtk_pcie_driver = { + .probe = mtk_pcie_probe, + .driver = { + .name = "mtk-pcie", + .of_match_table = mtk_pcie_ids, + .suppress_bind_attrs = true, + }, +}; +builtin_platform_driver(mtk_pcie_driver); |