diff options
| -rw-r--r-- | Documentation/devicetree/bindings/regulator/samsung,s2mpg11-regulator.yaml | 136 | ||||
| -rw-r--r-- | include/dt-bindings/regulator/samsung,s2mpg10-regulator.h | 14 |
2 files changed, 150 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/regulator/samsung,s2mpg11-regulator.yaml b/Documentation/devicetree/bindings/regulator/samsung,s2mpg11-regulator.yaml new file mode 100644 index 000000000000..119386325d1b --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/samsung,s2mpg11-regulator.yaml @@ -0,0 +1,136 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/samsung,s2mpg11-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S2MPG11 Power Management IC regulators + +maintainers: + - André Draszik <andre.draszik@linaro.org> + +description: | + This is part of the device tree bindings for the S2MG11 Power Management IC + (PMIC). + + The S2MPG11 PMIC provides 12 buck, 1 buck-boost, and 15 LDO regulators. + + See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for + additional information and example. + +properties: + buckboost: + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for the buck-boost regulator. + + properties: + regulator-ramp-delay: false + +patternProperties: + # 12 bucks + "^buck(([1-9]|10)s|[ad])$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for a single buck regulator. + + allOf: + - $ref: "#/$defs/s2mpg11-ext-control" + + properties: + regulator-ramp-delay: + enum: [6250, 12500, 25000] + default: 6250 + + # 11 standard LDOs + "^ldo([3-79]|1[01245])s$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for a single LDO regulator. + + properties: + regulator-ramp-delay: false + + # 2 LDOs with possible external control + "^ldo(8|13)s$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for single LDO regulator. + + allOf: + - $ref: "#/$defs/s2mpg11-ext-control" + + properties: + regulator-ramp-delay: false + + # 2 LDOs with ramp support and possible external control + "^ldo[12]s$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for a single LDO regulator. + + allOf: + - $ref: "#/$defs/s2mpg11-ext-control" + + properties: + regulator-ramp-delay: + enum: [6250, 12500] + default: 6250 + +$defs: + s2mpg11-ext-control: + properties: + samsung,ext-control: + description: | + These rails can be controlled via one of several possible external + (hardware) signals. If so, this property configures the signal the PMIC + should monitor. The following values generally corresponding to the + respective on-chip pin are valid: + - 0 # S2MPG11_EXTCTRL_PWREN - PWREN pin + - 1 # S2MPG11_EXTCTRL_PWREN_MIF - PWREN_MIF pin + - 2 # S2MPG11_EXTCTRL_AP_ACTIVE_N - ~AP_ACTIVE_N pin + - 3 # S2MPG11_EXTCTRL_G3D_EN - G3D_EN pin + - 4 # S2MPG11_EXTCTRL_G3D_EN2 - G3D_EN & ~AP_ACTIVE_N pins + - 5 # S2MPG11_EXTCTRL_AOC_VDD - AOC_VDD pin + - 6 # S2MPG11_EXTCTRL_AOC_RET - AOC_RET pin + - 7 # S2MPG11_EXTCTRL_UFS_EN - UFS_EN pin + - 8 # S2MPG11_EXTCTRL_LDO13S_EN - VLDO13S_EN pin + + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 8 + + enable-gpios: + description: + For rails where external control is done via a GPIO, this optional + property describes the GPIO line used. + + dependentRequired: + enable-gpios: [ "samsung,ext-control" ] + +allOf: + # Bucks 4, 6, 7 and 10 can not be controlled externally - above definition + # allows it and we deny it here. This approach reduces repetition. + - if: + anyOf: + - required: [buck4s] + - required: [buck6s] + - required: [buck7s] + - required: [buck10s] + then: + patternProperties: + "^buck([467]|10)s$": + properties: + samsung,ext-control: false + +additionalProperties: false diff --git a/include/dt-bindings/regulator/samsung,s2mpg10-regulator.h b/include/dt-bindings/regulator/samsung,s2mpg10-regulator.h index 4a6bf13442f5..d9c16bba4d85 100644 --- a/include/dt-bindings/regulator/samsung,s2mpg10-regulator.h +++ b/include/dt-bindings/regulator/samsung,s2mpg10-regulator.h @@ -20,6 +20,10 @@ * * ldo20m supports external control, but using a different set of control * signals. + * + * S2MPG11 regulators supporting these are: + * - buck1s .. buck3s buck5s buck8s buck9s bucka buckd + * - ldo1s ldo2s ldo8s ldo13s */ #define S2MPG10_EXTCTRL_PWREN 0 /* PWREN pin */ #define S2MPG10_EXTCTRL_PWREN_MIF 1 /* PWREN_MIF pin */ @@ -36,4 +40,14 @@ #define S2MPG10_EXTCTRL_LDO20M_EN2 11 /* VLDO20M_EN & LDO20M_SFR */ #define S2MPG10_EXTCTRL_LDO20M_EN 12 /* VLDO20M_EN pin */ +#define S2MPG11_EXTCTRL_PWREN 0 /* PWREN pin */ +#define S2MPG11_EXTCTRL_PWREN_MIF 1 /* PWREN_MIF pin */ +#define S2MPG11_EXTCTRL_AP_ACTIVE_N 2 /* ~AP_ACTIVE_N pin */ +#define S2MPG11_EXTCTRL_G3D_EN 3 /* G3D_EN pin */ +#define S2MPG11_EXTCTRL_G3D_EN2 4 /* G3D_EN & ~AP_ACTIVE_N pins */ +#define S2MPG11_EXTCTRL_AOC_VDD 5 /* AOC_VDD pin */ +#define S2MPG11_EXTCTRL_AOC_RET 6 /* AOC_RET pin */ +#define S2MPG11_EXTCTRL_UFS_EN 7 /* UFS_EN pin */ +#define S2MPG11_EXTCTRL_LDO13S_EN 8 /* VLDO13S_EN pin */ + #endif /* _DT_BINDINGS_REGULATOR_SAMSUNG_S2MPG10_H */ |