diff options
| -rw-r--r-- | arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts | 148 |
1 files changed, 129 insertions, 19 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts index 16078ff60ef0..7e46537a22a0 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts @@ -93,6 +93,17 @@ status = "disabled"; }; + reg_pcie0: regulator-pcie { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi>; + regulator-name = "WIFI_BT_RST#"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_usdhc2_vmmc: regulator-usdhc2-vmmc { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -190,7 +201,7 @@ &eqos { /* First ethernet */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_eqos>; - phy-handle = <&phy_eqos>; + phy-handle = <&phy_eqos_bcm>; phy-mode = "rgmii-id"; status = "okay"; @@ -200,7 +211,7 @@ #size-cells = <0>; /* Atheros AR8031 PHY */ - phy_eqos: ethernet-phy@0 { + phy_eqos_ath: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; /* @@ -213,6 +224,7 @@ reset-deassert-us = <10000>; qca,keep-pll-enabled; vddio-supply = <&vddio_eqos>; + status = "disabled"; vddio_eqos: vddio-regulator { regulator-name = "VDDIO_EQOS"; @@ -224,13 +236,27 @@ regulator-name = "VDDH_EQOS"; }; }; + + /* Broadcom BCM54213PE PHY */ + phy_eqos_bcm: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + /* + * Dedicated ENET_INT# and ENET_WOL# signals are + * unused, the PHY does not provide cable detect + * interrupt. + */ + reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + }; }; }; &fec { /* Second ethernet */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; - phy-handle = <&phy_fec>; + phy-handle = <&phy_fec_bcm>; phy-mode = "rgmii-id"; fsl,magic-packet; status = "okay"; @@ -240,7 +266,7 @@ #size-cells = <0>; /* Atheros AR8031 PHY */ - phy_fec: ethernet-phy@0 { + phy_fec_ath: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; /* @@ -253,6 +279,7 @@ reset-deassert-us = <10000>; qca,keep-pll-enabled; vddio-supply = <&vddio_fec>; + status = "disabled"; vddio_fec: vddio-regulator { regulator-name = "VDDIO_FEC"; @@ -264,6 +291,20 @@ regulator-name = "VDDH_FEC"; }; }; + + /* Broadcom BCM54213PE PHY */ + phy_fec_bcm: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + /* + * Dedicated ENET_INT# and ENET_WOL# signals are + * unused, the PHY does not provide cable detect + * interrupt. + */ + reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + }; }; }; @@ -378,13 +419,26 @@ self-powered; }; - eeprom: eeprom@50 { + tpm: tpm@2e { + compatible = "st,st33tphf2ei2c", "tcg,tpm-tis-i2c"; + reg = <0x2e>; + }; + + eeprom900: eeprom@50 { /* board rev.900 */ compatible = "atmel,24c32"; reg = <0x50>; pagesize = <32>; + status = "disabled"; + }; + + eeprom902: eeprom@51 { /* board rev.902 */ + compatible = "atmel,24c32"; + reg = <0x51>; + pagesize = <32>; }; rtc: rtc@68 { + #clock-cells = <1>; compatible = "st,m41t62"; reg = <0x68>; pinctrl-names = "default"; @@ -408,6 +462,46 @@ scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; + + gpiolvds: io-expander@20 { + compatible = "nxp,pca9554"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "BL_ENABLE_V", "SEL_BL_12V", + "SEL_PANEL_5V", "SEL_PANEL_12V", + "SEL_BL_PWM", "SEL_BL_EN", + "REVERSE_SCAN_PANEL", "GND_REV903"; + }; + + gpiowifi: io-expander@21 { + compatible = "nxp,pca9554"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "BL_LVDS_ENABLE_3V3", "BL_LVDS_PWM_3V3", + "M2_BT_WAKE_3V3#", "M2_W_DISABLE2_3V3#", + "TFT_PANEL_ENABLE_3V3", "TPM_RESET_3V3#", + "CSI2_PD_3V3", "CSI2_RESET_3V3#"; + + /* BL_LVDS_PWM_3V3 is patch-wired to BL_PWM_3V3 on rev.903 */ + pwm-input-hog { + gpio-hog; + gpios = <1 0>; + input; + line-name = "BL_LVDS_PWM_3V3_HOG"; + }; + }; + + eepromlvds: eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + pagesize = <32>; + /* Optional EEPROM, disabled by default. */ + status = "disabled"; + }; }; &i2c3 { @@ -521,6 +615,7 @@ pinctrl-0 = <&pinctrl_pcie0>; fsl,max-link-speed = <3>; reset-gpio = <&gpio1 5 GPIO_ACTIVE_LOW>; + vpcie-supply = <®_pcie0>; status = "okay"; }; @@ -598,7 +693,17 @@ &uart4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart4>; - status = "disabled"; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "infineon,cyw55572-bt"; + brcm,requires-autobaud-mode; + clocks = <&rtc 0>; + clock-names = "txco"; + max-speed = <921600>; + shutdown-gpios = <&gpiowifi 3 GPIO_ACTIVE_HIGH>; + }; }; &usb3_phy0 { @@ -686,8 +791,6 @@ MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91 /* ENET_RST# */ MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 0x6 - /* ENET_INT# */ - MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x40000090 >; }; @@ -709,8 +812,6 @@ MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f /* ENET2_RST# */ MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09 0x6 - /* ENET2_INT# */ - MX8MP_IOMUXC_SD1_DATA0__GPIO2_IO02 0x40000090 >; }; @@ -754,10 +855,6 @@ /* PG_V_IN_VAR# */ MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01 0x40000000 - /* CSI2_PD_1V8 */ - MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08 0x0 - /* CSI2_RESET_1V8# */ - MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09 0x0 /* DIS_USB_DN1 */ MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x0 @@ -771,8 +868,14 @@ /* GRAPHICS_PRSNT_1V8# */ MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x40000000 + /* TOUCH_RESET_3V3# */ + MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00 0x2 + /* TOUCH_INT# */ + MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x40000140 /* CLK_CCM_CLKO1_3V3 */ MX8MP_IOMUXC_GPIO1_IO14__CCM_CLKO1 0x10 + /* ENET_INT# (rev.900,901) or M2_WDIS_BTIRQ_3V3# (rev.903) */ + MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x40000092 >; }; @@ -875,12 +978,10 @@ fsl,pins = < /* M2_PCIE_RST# */ MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05 0x2 - /* M2_W_DISABLE1_1V8# */ + /* M2_PCIE_WAKE_1V8# */ MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23 0x2 - /* M2_W_DISABLE2_1V8# */ - MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24 0x2 - /* CLK_M2_32K768 */ - MX8MP_IOMUXC_GPIO1_IO00__CCM_EXT_CLK1 0x14 + /* M2_UART_WAKE_1V8# */ + MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24 0x40000002 /* M2_PCIE_WAKE# */ MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x40000140 /* M2_PCIE_CLKREQ# */ @@ -974,6 +1075,8 @@ fsl,pins = < MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x49 MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x49 + MX8MP_IOMUXC_NAND_DATA02__UART4_DCE_CTS 0x149 + MX8MP_IOMUXC_NAND_DATA03__UART4_DCE_RTS 0x149 >; }; @@ -1100,4 +1203,11 @@ MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08 0x26 >; }; + + pinctrl_wifi: wifi-grp { + fsl,pins = < + /* WIFI_BT_RST_3V3# */ + MX8MP_IOMUXC_SD1_DATA0__GPIO2_IO02 0x40000090 + >; + }; }; |