selftests: ocelot: tc_flower_chains: use conventional interface names

This is a robotic rename as follows:

eth0 -> swp1
eth1 -> swp2
eth2 -> h2
eth3 -> h1

This brings the selftest more in line with the other forwarding
selftests, where h1 is connected to swp1, and h2 to swp2.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 67 insertions, 67 deletions

diff --git a/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh b/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh
index a27f24a6aa07..ecaeae7197b8 100755
--- a/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh
+++ b/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh
@@ -15,7 +15,7 @@ require_command tcpdump
 #   |       DUT ports         Generator ports     |
 #   | +--------+ +--------+ +--------+ +--------+ |
 #   | |        | |        | |        | |        | |
-#   | |  eth0  | |  eth1  | |  eth2  | |  eth3  | |
+#   | |  swp1  | |  swp2  | |   h2   | |    h1  | |
 #   | |        | |        | |        | |        | |
 #   +-+--------+-+--------+-+--------+-+--------+-+
 #          |         |           |          |
@@ -24,15 +24,15 @@ require_command tcpdump
 #          |                                |
 #          +--------------------------------+
 
-eth0=${NETIFS[p1]}
-eth1=${NETIFS[p2]}
-eth2=${NETIFS[p3]}
-eth3=${NETIFS[p4]}
+swp1=${NETIFS[p1]}
+swp2=${NETIFS[p2]}
+h2=${NETIFS[p3]}
+h1=${NETIFS[p4]}
 
-eth0_mac="de:ad:be:ef:00:00"
-eth1_mac="de:ad:be:ef:00:01"
-eth2_mac="de:ad:be:ef:00:02"
-eth3_mac="de:ad:be:ef:00:03"
+swp1_mac="de:ad:be:ef:00:00"
+swp2_mac="de:ad:be:ef:00:01"
+h2_mac="de:ad:be:ef:00:02"
+h1_mac="de:ad:be:ef:00:03"
 
 # Helpers to map a VCAP IS1 and VCAP IS2 lookup and policy to a chain number
 # used by the kernel driver. The numbers are:
@@ -156,39 +156,39 @@ create_tcam_skeleton()
 
 setup_prepare()
 {
-	ip link set $eth0 up
-	ip link set $eth1 up
-	ip link set $eth2 up
-	ip link set $eth3 up
+	ip link set $swp1 up
+	ip link set $swp2 up
+	ip link set $h2 up
+	ip link set $h1 up
 
-	create_tcam_skeleton $eth0
+	create_tcam_skeleton $swp1
 
 	ip link add br0 type bridge
-	ip link set $eth0 master br0
-	ip link set $eth1 master br0
+	ip link set $swp1 master br0
+	ip link set $swp2 master br0
 	ip link set br0 up
 
-	ip link add link $eth3 name $eth3.100 type vlan id 100
-	ip link set $eth3.100 up
+	ip link add link $h1 name $h1.100 type vlan id 100
+	ip link set $h1.100 up
 
-	ip link add link $eth3 name $eth3.200 type vlan id 200
-	ip link set $eth3.200 up
+	ip link add link $h1 name $h1.200 type vlan id 200
+	ip link set $h1.200 up
 
-	tc filter add dev $eth0 ingress chain $(IS1 1) pref 1 \
+	tc filter add dev $swp1 ingress chain $(IS1 1) pref 1 \
 		protocol 802.1Q flower skip_sw vlan_id 100 \
 		action vlan pop \
 		action goto chain $(IS1 2)
 
-	tc filter add dev $eth0 egress chain $(ES0) pref 1 \
-		flower skip_sw indev $eth1 \
+	tc filter add dev $swp1 egress chain $(ES0) pref 1 \
+		flower skip_sw indev $swp2 \
 		action vlan push protocol 802.1Q id 100
 
-	tc filter add dev $eth0 ingress chain $(IS1 0) pref 2 \
+	tc filter add dev $swp1 ingress chain $(IS1 0) pref 2 \
 		protocol ipv4 flower skip_sw src_ip 10.1.1.2 \
 		action skbedit priority 7 \
 		action goto chain $(IS1 1)
 
-	tc filter add dev $eth0 ingress chain $(IS2 0 0) pref 1 \
+	tc filter add dev $swp1 ingress chain $(IS2 0 0) pref 1 \
 		protocol ipv4 flower skip_sw ip_proto udp dst_port 5201 \
 		action police rate 50mbit burst 64k conform-exceed drop/pipe \
 		action goto chain $(IS2 1 0)
@@ -196,9 +196,9 @@ setup_prepare()
 
 cleanup()
 {
-	ip link del $eth3.200
-	ip link del $eth3.100
-	tc qdisc del dev $eth0 clsact
+	ip link del $h1.200
+	ip link del $h1.100
+	tc qdisc del dev $swp1 clsact
 	ip link del br0
 }
 
@@ -206,21 +206,21 @@ test_vlan_pop()
 {
 	RET=0
 
-	tcpdump_start $eth2
+	tcpdump_start $h2
 
 	# Work around Mausezahn VLAN builder bug
 	# (https://github.com/netsniff-ng/netsniff-ng/issues/225) by using
 	# an 8021q upper
-	$MZ $eth3.100 -q -c 1 -p 64 -a $eth3_mac -b $eth2_mac -t ip
+	$MZ $h1.100 -q -c 1 -p 64 -a $h1_mac -b $h2_mac -t ip
 
 	sleep 1
 
-	tcpdump_stop $eth2
+	tcpdump_stop $h2
 
-	tcpdump_show $eth2 | grep -q "$eth3_mac > $eth2_mac, ethertype IPv4"
+	tcpdump_show $h2 | grep -q "$h1_mac > $h2_mac, ethertype IPv4"
 	check_err "$?" "untagged reception"
 
-	tcpdump_cleanup $eth2
+	tcpdump_cleanup $h2
 
 	log_test "VLAN pop"
 }
@@ -229,18 +229,18 @@ test_vlan_push()
 {
 	RET=0
 
-	tcpdump_start $eth3.100
+	tcpdump_start $h1.100
 
-	$MZ $eth2 -q -c 1 -p 64 -a $eth2_mac -b $eth3_mac -t ip
+	$MZ $h2 -q -c 1 -p 64 -a $h2_mac -b $h1_mac -t ip
 
 	sleep 1
 
-	tcpdump_stop $eth3.100
+	tcpdump_stop $h1.100
 
-	tcpdump_show $eth3.100 | grep -q "$eth2_mac > $eth3_mac"
+	tcpdump_show $h1.100 | grep -q "$h2_mac > $h1_mac"
 	check_err "$?" "tagged reception"
 
-	tcpdump_cleanup $eth3.100
+	tcpdump_cleanup $h1.100
 
 	log_test "VLAN push"
 }
@@ -250,33 +250,33 @@ test_vlan_ingress_modify()
 	RET=0
 
 	ip link set br0 type bridge vlan_filtering 1
-	bridge vlan add dev $eth0 vid 200
-	bridge vlan add dev $eth0 vid 300
-	bridge vlan add dev $eth1 vid 300
+	bridge vlan add dev $swp1 vid 200
+	bridge vlan add dev $swp1 vid 300
+	bridge vlan add dev $swp2 vid 300
 
-	tc filter add dev $eth0 ingress chain $(IS1 2) pref 3 \
+	tc filter add dev $swp1 ingress chain $(IS1 2) pref 3 \
 		protocol 802.1Q flower skip_sw vlan_id 200 \
 		action vlan modify id 300 \
 		action goto chain $(IS2 0 0)
 
-	tcpdump_start $eth2
+	tcpdump_start $h2
 
-	$MZ $eth3.200 -q -c 1 -p 64 -a $eth3_mac -b $eth2_mac -t ip
+	$MZ $h1.200 -q -c 1 -p 64 -a $h1_mac -b $h2_mac -t ip
 
 	sleep 1
 
-	tcpdump_stop $eth2
+	tcpdump_stop $h2
 
-	tcpdump_show $eth2 | grep -q "$eth3_mac > $eth2_mac, .* vlan 300"
+	tcpdump_show $h2 | grep -q "$h1_mac > $h2_mac, .* vlan 300"
 	check_err "$?" "tagged reception"
 
-	tcpdump_cleanup $eth2
+	tcpdump_cleanup $h2
 
-	tc filter del dev $eth0 ingress chain $(IS1 2) pref 3
+	tc filter del dev $swp1 ingress chain $(IS1 2) pref 3
 
-	bridge vlan del dev $eth0 vid 200
-	bridge vlan del dev $eth0 vid 300
-	bridge vlan del dev $eth1 vid 300
+	bridge vlan del dev $swp1 vid 200
+	bridge vlan del dev $swp1 vid 300
+	bridge vlan del dev $swp2 vid 300
 	ip link set br0 type bridge vlan_filtering 0
 
 	log_test "Ingress VLAN modification"
@@ -286,34 +286,34 @@ test_vlan_egress_modify()
 {
 	RET=0
 
-	tc qdisc add dev $eth1 clsact
+	tc qdisc add dev $swp2 clsact
 
 	ip link set br0 type bridge vlan_filtering 1
-	bridge vlan add dev $eth0 vid 200
-	bridge vlan add dev $eth1 vid 200
+	bridge vlan add dev $swp1 vid 200
+	bridge vlan add dev $swp2 vid 200
 
-	tc filter add dev $eth1 egress chain $(ES0) pref 3 \
+	tc filter add dev $swp2 egress chain $(ES0) pref 3 \
 		protocol 802.1Q flower skip_sw vlan_id 200 vlan_prio 0 \
 		action vlan modify id 300 priority 7
 
-	tcpdump_start $eth2
+	tcpdump_start $h2
 
-	$MZ $eth3.200 -q -c 1 -p 64 -a $eth3_mac -b $eth2_mac -t ip
+	$MZ $h1.200 -q -c 1 -p 64 -a $h1_mac -b $h2_mac -t ip
 
 	sleep 1
 
-	tcpdump_stop $eth2
+	tcpdump_stop $h2
 
-	tcpdump_show $eth2 | grep -q "$eth3_mac > $eth2_mac, .* vlan 300"
+	tcpdump_show $h2 | grep -q "$h1_mac > $h2_mac, .* vlan 300"
 	check_err "$?" "tagged reception"
 
-	tcpdump_cleanup $eth2
+	tcpdump_cleanup $h2
 
-	tc filter del dev $eth1 egress chain $(ES0) pref 3
-	tc qdisc del dev $eth1 clsact
+	tc filter del dev $swp2 egress chain $(ES0) pref 3
+	tc qdisc del dev $swp2 clsact
 
-	bridge vlan del dev $eth0 vid 200
-	bridge vlan del dev $eth1 vid 200
+	bridge vlan del dev $swp1 vid 200
+	bridge vlan del dev $swp2 vid 200
 	ip link set br0 type bridge vlan_filtering 0
 
 	log_test "Egress VLAN modification"
@@ -323,11 +323,11 @@ test_skbedit_priority()
 {
 	local num_pkts=100
 
-	before=$(ethtool_stats_get $eth0 'rx_green_prio_7')
+	before=$(ethtool_stats_get $swp1 'rx_green_prio_7')
 
-	$MZ $eth3 -q -c $num_pkts -p 64 -a $eth3_mac -b $eth2_mac -t ip -A 10.1.1.2
+	$MZ $h1 -q -c $num_pkts -p 64 -a $h1_mac -b $h2_mac -t ip -A 10.1.1.2
 
-	after=$(ethtool_stats_get $eth0 'rx_green_prio_7')
+	after=$(ethtool_stats_get $swp1 'rx_green_prio_7')
 
 	if [ $((after - before)) = $num_pkts ]; then
 		RET=0