Merge branch 'mlxsw-line-card'

Ido Schimmel says:

====================
mlxsw: Introduce line card support for modular switch

Jiri says:

This patchset introduces support for modular switch systems and also
introduces mlxsw support for NVIDIA Mellanox SN4800 modular switch.
It contains 8 slots to accommodate line cards - replaceable PHY modules
which may contain gearboxes.
Currently supported line card:
16X 100GbE (QSFP28)
Other line cards that are going to be supported:
8X 200GbE (QSFP56)
4X 400GbE (QSFP-DD)
There may be other types of line cards added in the future.

To be consistent with the port split configuration (splitter cabels),
the line card entities are treated in the similar way. The nature of
a line card is not "a pluggable device", but "a pluggable PHY module".

A concept of "provisioning" is introduced. The user may "provision"
certain slot with a line card type. Driver then creates all instances
(devlink ports, netdevices, etc) related to this line card type. It does
not matter if the line card is plugged-in at the time. User is able to
configure netdevices, devlink ports, setup port splitters, etc. From the
perspective of the switch ASIC, all is present and can be configured.

The carrier of netdevices stays down if the line card is not plugged-in.
Once the line card is inserted and activated, the carrier of
the related netdevices is then reflecting the physical line state,
same as for an ordinary fixed port.

Once user does not want to use the line card related instances
anymore, he can "unprovision" the slot. Driver then removes the
instances.

Patches 1-4 are extending devlink driver API and UAPI in order to
register, show, dump, provision and activate the line card.
Patches 5-17 are implementing the introduced API in mlxsw.
The last patch adds a selftest for mlxsw line cards.

Example:
$ devlink port # No ports are listed
$ devlink lc
pci/0000:01:00.0:
  lc 1 state unprovisioned
    supported_types:
       16x100G
  lc 2 state unprovisioned
    supported_types:
       16x100G
  lc 3 state unprovisioned
    supported_types:
       16x100G
  lc 4 state unprovisioned
    supported_types:
       16x100G
  lc 5 state unprovisioned
    supported_types:
       16x100G
  lc 6 state unprovisioned
    supported_types:
       16x100G
  lc 7 state unprovisioned
    supported_types:
       16x100G
  lc 8 state unprovisioned
    supported_types:
       16x100G

Note that driver exposes list supported line card types. Currently
there is only one: "16x100G".

To provision the slot #8:

$ devlink lc set pci/0000:01:00.0 lc 8 type 16x100G
$ devlink lc show pci/0000:01:00.0 lc 8
pci/0000:01:00.0:
  lc 8 state active type 16x100G
    supported_types:
       16x100G
$ devlink port
pci/0000:01:00.0/0: type notset flavour cpu port 0 splittable false
pci/0000:01:00.0/53: type eth netdev enp1s0nl8p1 flavour physical lc 8 port 1 splittable true lanes 4
pci/0000:01:00.0/54: type eth netdev enp1s0nl8p2 flavour physical lc 8 port 2 splittable true lanes 4
pci/0000:01:00.0/55: type eth netdev enp1s0nl8p3 flavour physical lc 8 port 3 splittable true lanes 4
pci/0000:01:00.0/56: type eth netdev enp1s0nl8p4 flavour physical lc 8 port 4 splittable true lanes 4
pci/0000:01:00.0/57: type eth netdev enp1s0nl8p5 flavour physical lc 8 port 5 splittable true lanes 4
pci/0000:01:00.0/58: type eth netdev enp1s0nl8p6 flavour physical lc 8 port 6 splittable true lanes 4
pci/0000:01:00.0/59: type eth netdev enp1s0nl8p7 flavour physical lc 8 port 7 splittable true lanes 4
pci/0000:01:00.0/60: type eth netdev enp1s0nl8p8 flavour physical lc 8 port 8 splittable true lanes 4
pci/0000:01:00.0/61: type eth netdev enp1s0nl8p9 flavour physical lc 8 port 9 splittable true lanes 4
pci/0000:01:00.0/62: type eth netdev enp1s0nl8p10 flavour physical lc 8 port 10 splittable true lanes 4
pci/0000:01:00.0/63: type eth netdev enp1s0nl8p11 flavour physical lc 8 port 11 splittable true lanes 4
pci/0000:01:00.0/64: type eth netdev enp1s0nl8p12 flavour physical lc 8 port 12 splittable true lanes 4
pci/0000:01:00.0/125: type eth netdev enp1s0nl8p13 flavour physical lc 8 port 13 splittable true lanes 4
pci/0000:01:00.0/126: type eth netdev enp1s0nl8p14 flavour physical lc 8 port 14 splittable true lanes 4
pci/0000:01:00.0/127: type eth netdev enp1s0nl8p15 flavour physical lc 8 port 15 splittable true lanes 4
pci/0000:01:00.0/128: type eth netdev enp1s0nl8p16 flavour physical lc 8 port 16 splittable true lanes 4

To uprovision the slot #8:

$ devlink lc set pci/0000:01:00.0 lc 8 notype
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 280 insertions, 0 deletions

diff --git a/tools/testing/selftests/drivers/net/mlxsw/devlink_linecard.sh b/tools/testing/selftests/drivers/net/mlxsw/devlink_linecard.sh
new file mode 100755
index 000000000000..08a922d8b86a
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/devlink_linecard.sh
@@ -0,0 +1,280 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# In addition to the common variables, user might use:
+# LC_SLOT - If not set, all probed line cards are going to be tested,
+#	    with an exception of the "activation_16x100G_test".
+#	    It set, only the selected line card is going to be used
+#	    for tests, including "activation_16x100G_test".
+
+lib_dir=$(dirname $0)/../../../net/forwarding
+
+ALL_TESTS="
+	unprovision_test
+	provision_test
+	activation_16x100G_test
+"
+
+NUM_NETIFS=0
+
+source $lib_dir/lib.sh
+source $lib_dir/devlink_lib.sh
+
+until_lc_state_is()
+{
+	local state=$1; shift
+	local current=$("$@")
+
+	echo "$current"
+	[ "$current" == "$state" ]
+}
+
+until_lc_state_is_not()
+{
+	! until_lc_state_is "$@"
+}
+
+lc_state_get()
+{
+	local lc=$1
+
+	devlink lc show $DEVLINK_DEV lc $lc -j | jq -e -r ".[][][].state"
+}
+
+lc_wait_until_state_changes()
+{
+	local lc=$1
+	local state=$2
+	local timeout=$3 # ms
+
+	busywait "$timeout" until_lc_state_is_not "$state" lc_state_get "$lc"
+}
+
+lc_wait_until_state_becomes()
+{
+	local lc=$1
+	local state=$2
+	local timeout=$3 # ms
+
+	busywait "$timeout" until_lc_state_is "$state" lc_state_get "$lc"
+}
+
+until_lc_port_count_is()
+{
+	local port_count=$1; shift
+	local current=$("$@")
+
+	echo "$current"
+	[ $current == $port_count ]
+}
+
+lc_port_count_get()
+{
+	local lc=$1
+
+	devlink port -j | jq -e -r ".[][] | select(.lc==$lc) | .port" | wc -l
+}
+
+lc_wait_until_port_count_is()
+{
+	local lc=$1
+	local port_count=$2
+	local timeout=$3 # ms
+
+	busywait "$timeout" until_lc_port_count_is "$port_count" lc_port_count_get "$lc"
+}
+
+PROV_UNPROV_TIMEOUT=8000 # ms
+POST_PROV_ACT_TIMEOUT=2000 # ms
+PROV_PORTS_INSTANTIATION_TIMEOUT=15000 # ms
+
+unprovision_one()
+{
+	local lc=$1
+	local state
+
+	state=$(lc_state_get $lc)
+	check_err $? "Failed to get state of linecard $lc"
+	if [[ "$state" == "unprovisioned" ]]; then
+		return
+	fi
+
+	log_info "Unprovisioning linecard $lc"
+
+	devlink lc set $DEVLINK_DEV lc $lc notype
+	check_err $? "Failed to trigger linecard $lc unprovisioning"
+
+	state=$(lc_wait_until_state_changes $lc "unprovisioning" \
+		$PROV_UNPROV_TIMEOUT)
+	check_err $? "Failed to unprovision linecard $lc (timeout)"
+
+	[ "$state" == "unprovisioned" ]
+	check_err $? "Failed to unprovision linecard $lc (state=$state)"
+}
+
+provision_one()
+{
+	local lc=$1
+	local type=$2
+	local state
+
+	log_info "Provisioning linecard $lc"
+
+	devlink lc set $DEVLINK_DEV lc $lc type $type
+	check_err $? "Failed trigger linecard $lc provisioning"
+
+	state=$(lc_wait_until_state_changes $lc "provisioning" \
+		$PROV_UNPROV_TIMEOUT)
+	check_err $? "Failed to provision linecard $lc (timeout)"
+
+	[ "$state" == "provisioned" ] || [ "$state" == "active" ]
+	check_err $? "Failed to provision linecard $lc (state=$state)"
+
+	provisioned_type=$(devlink lc show $DEVLINK_DEV lc $lc -j | jq -e -r ".[][][].type")
+	[ "$provisioned_type" == "$type" ]
+	check_err $? "Wrong provision type returned for linecard $lc (got \"$provisioned_type\", expected \"$type\")"
+
+	# Wait for possible activation to make sure the state
+	# won't change after return from this function.
+	state=$(lc_wait_until_state_becomes $lc "active" \
+		$POST_PROV_ACT_TIMEOUT)
+}
+
+unprovision_test()
+{
+	RET=0
+	local lc
+
+	lc=$LC_SLOT
+	unprovision_one $lc
+	log_test "Unprovision"
+}
+
+LC_16X100G_TYPE="16x100G"
+LC_16X100G_PORT_COUNT=16
+
+supported_types_check()
+{
+	local lc=$1
+	local supported_types_count
+	local type_index
+	local lc_16x100_found=false
+
+	supported_types_count=$(devlink lc show $DEVLINK_DEV lc $lc -j | \
+				jq -e -r ".[][][].supported_types | length")
+	[ $supported_types_count != 0 ]
+	check_err $? "No supported types found for linecard $lc"
+	for (( type_index=0; type_index<$supported_types_count; type_index++ ))
+	do
+		type=$(devlink lc show $DEVLINK_DEV lc $lc -j | \
+		       jq -e -r ".[][][].supported_types[$type_index]")
+		if [[ "$type" == "$LC_16X100G_TYPE" ]]; then
+			lc_16x100_found=true
+			break
+		fi
+	done
+	[ $lc_16x100_found = true ]
+	check_err $? "16X100G not found between supported types of linecard $lc"
+}
+
+ports_check()
+{
+	local lc=$1
+	local expected_port_count=$2
+	local port_count
+
+	port_count=$(lc_wait_until_port_count_is $lc $expected_port_count \
+		$PROV_PORTS_INSTANTIATION_TIMEOUT)
+	[ $port_count != 0 ]
+	check_err $? "No port associated with linecard $lc"
+	[ $port_count == $expected_port_count ]
+	check_err $? "Unexpected port count linecard $lc (got $port_count, expected $expected_port_count)"
+}
+
+provision_test()
+{
+	RET=0
+	local lc
+	local type
+	local state
+
+	lc=$LC_SLOT
+	supported_types_check $lc
+	state=$(lc_state_get $lc)
+	check_err $? "Failed to get state of linecard $lc"
+	if [[ "$state" != "unprovisioned" ]]; then
+		unprovision_one $lc
+	fi
+	provision_one $lc $LC_16X100G_TYPE
+	ports_check $lc $LC_16X100G_PORT_COUNT
+	log_test "Provision"
+}
+
+ACTIVATION_TIMEOUT=20000 # ms
+
+interface_check()
+{
+	ip link set $h1 up
+	ip link set $h2 up
+	ifaces_upped=true
+	setup_wait
+}
+
+activation_16x100G_test()
+{
+	RET=0
+	local lc
+	local type
+	local state
+
+	lc=$LC_SLOT
+	type=$LC_16X100G_TYPE
+
+	unprovision_one $lc
+	provision_one $lc $type
+	state=$(lc_wait_until_state_becomes $lc "active" \
+		$ACTIVATION_TIMEOUT)
+	check_err $? "Failed to get linecard $lc activated (timeout)"
+
+	interface_check
+
+	log_test "Activation 16x100G"
+}
+
+setup_prepare()
+{
+	local lc_num=$(devlink lc show -j | jq -e -r ".[][\"$DEVLINK_DEV\"] |length")
+	if [[ $? -ne 0 ]] || [[ $lc_num -eq 0 ]]; then
+		echo "SKIP: No linecard support found"
+		exit $ksft_skip
+	fi
+
+	if [ -z "$LC_SLOT" ]; then
+		echo "SKIP: \"LC_SLOT\" variable not provided"
+		exit $ksft_skip
+	fi
+
+	# Interfaces are not present during the script start,
+	# that's why we define NUM_NETIFS here so dummy
+	# implicit veth pairs are not created.
+	NUM_NETIFS=2
+	h1=${NETIFS[p1]}
+	h2=${NETIFS[p2]}
+	ifaces_upped=false
+}
+
+cleanup()
+{
+	if [ "$ifaces_upped" = true ] ; then
+		ip link set $h1 down
+		ip link set $h2 down
+	fi
+}
+
+trap cleanup EXIT
+
+setup_prepare
+
+tests_run
+
+exit $EXIT_STATUS