Merge tag 'net-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
 "Current release - new code bugs:

   - eth: mlx5: HWS, don't destroy more bwc queue locks than allocated

  Previous releases - regressions:

   - ipv4: give an IPv4 dev to blackhole_netdev

   - udp: compute L4 checksum as usual when not segmenting the skb

   - tcp/dccp: don't use timer_pending() in reqsk_queue_unlink().

   - eth: mlx5e: don't call cleanup on profile rollback failure

   - eth: microchip: vcap api: fix memory leaks in
     vcap_api_encode_rule_test()

   - eth: enetc: disable Tx BD rings after they are empty

   - eth: macb: avoid 20s boot delay by skipping MDIO bus registration
     for fixed-link PHY

  Previous releases - always broken:

   - posix-clock: fix missing timespec64 check in pc_clock_settime()

   - genetlink: hold RCU in genlmsg_mcast()

   - mptcp: prevent MPC handshake on port-based signal endpoints

   - eth: vmxnet3: fix packet corruption in vmxnet3_xdp_xmit_frame

   - eth: stmmac: dwmac-tegra: fix link bring-up sequence

   - eth: bcmasp: fix potential memory leak in bcmasp_xmit()

  Misc:

   - add Andrew Lunn as a co-maintainer of all networking drivers"

* tag 'net-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
  net/mlx5e: Don't call cleanup on profile rollback failure
  net/mlx5: Unregister notifier on eswitch init failure
  net/mlx5: Fix command bitmask initialization
  net/mlx5: Check for invalid vector index on EQ creation
  net/mlx5: HWS, use lock classes for bwc locks
  net/mlx5: HWS, don't destroy more bwc queue locks than allocated
  net/mlx5: HWS, fixed double free in error flow of definer layout
  net/mlx5: HWS, removed wrong access to a number of rules variable
  mptcp: pm: fix UaF read in mptcp_pm_nl_rm_addr_or_subflow
  net: ethernet: mtk_eth_soc: fix memory corruption during fq dma init
  vmxnet3: Fix packet corruption in vmxnet3_xdp_xmit_frame
  net: dsa: vsc73xx: fix reception from VLAN-unaware bridges
  net: ravb: Only advertise Rx/Tx timestamps if hardware supports it
  net: microchip: vcap api: Fix memory leaks in vcap_api_encode_rule_test()
  net: phy: mdio-bcm-unimac: Add BCM6846 support
  dt-bindings: net: brcm,unimac-mdio: Add bcm6846-mdio
  udp: Compute L4 checksum as usual when not segmenting the skb
  genetlink: hold RCU in genlmsg_mcast()
  net: dsa: mv88e6xxx: Fix the max_vid definition for the MV88E6361
  tcp/dccp: Don't use timer_pending() in reqsk_queue_unlink().
  ...

3 files changed, 90 insertions, 31 deletions

diff --git a/tools/testing/selftests/net/lib/py/nsim.py b/tools/testing/selftests/net/lib/py/nsim.py
index f571a8b3139b..1a8cbe9acc48 100644
--- a/tools/testing/selftests/net/lib/py/nsim.py
+++ b/tools/testing/selftests/net/lib/py/nsim.py
@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 
+import errno
 import json
 import os
 import random
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index e8d0a01b4144..c07e2bd3a315 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -23,6 +23,7 @@ tmpfile=""
 cout=""
 err=""
 capout=""
+cappid=""
 ns1=""
 ns2=""
 iptables="iptables"
@@ -887,40 +888,62 @@ check_cestab()
 	fi
 }
 
-do_transfer()
+cond_start_capture()
 {
-	local listener_ns="$1"
-	local connector_ns="$2"
-	local cl_proto="$3"
-	local srv_proto="$4"
-	local connect_addr="$5"
-
-	local port=$((10000 + MPTCP_LIB_TEST_COUNTER - 1))
-	local cappid
-	local FAILING_LINKS=${FAILING_LINKS:-""}
-	local fastclose=${fastclose:-""}
-	local speed=${speed:-"fast"}
+	local ns="$1"
 
-	:> "$cout"
-	:> "$sout"
 	:> "$capout"
 
 	if $capture; then
-		local capuser
-		if [ -z $SUDO_USER ] ; then
+		local capuser capfile
+		if [ -z $SUDO_USER ]; then
 			capuser=""
 		else
 			capuser="-Z $SUDO_USER"
 		fi
 
-		capfile=$(printf "mp_join-%02u-%s.pcap" "$MPTCP_LIB_TEST_COUNTER" "${listener_ns}")
+		capfile=$(printf "mp_join-%02u-%s.pcap" "$MPTCP_LIB_TEST_COUNTER" "$ns")
 
 		echo "Capturing traffic for test $MPTCP_LIB_TEST_COUNTER into $capfile"
-		ip netns exec ${listener_ns} tcpdump -i any -s 65535 -B 32768 $capuser -w $capfile > "$capout" 2>&1 &
+		ip netns exec "$ns" tcpdump -i any -s 65535 -B 32768 $capuser -w "$capfile" > "$capout" 2>&1 &
 		cappid=$!
 
 		sleep 1
 	fi
+}
+
+cond_stop_capture()
+{
+	if $capture; then
+		sleep 1
+		kill $cappid
+		cat "$capout"
+	fi
+}
+
+get_port()
+{
+	echo "$((10000 + MPTCP_LIB_TEST_COUNTER - 1))"
+}
+
+do_transfer()
+{
+	local listener_ns="$1"
+	local connector_ns="$2"
+	local cl_proto="$3"
+	local srv_proto="$4"
+	local connect_addr="$5"
+	local port
+
+	local FAILING_LINKS=${FAILING_LINKS:-""}
+	local fastclose=${fastclose:-""}
+	local speed=${speed:-"fast"}
+	port=$(get_port)
+
+	:> "$cout"
+	:> "$sout"
+
+	cond_start_capture ${listener_ns}
 
 	NSTAT_HISTORY=/tmp/${listener_ns}.nstat ip netns exec ${listener_ns} \
 		nstat -n
@@ -1007,10 +1030,7 @@ do_transfer()
 	wait $spid
 	local rets=$?
 
-	if $capture; then
-	    sleep 1
-	    kill $cappid
-	fi
+	cond_stop_capture
 
 	NSTAT_HISTORY=/tmp/${listener_ns}.nstat ip netns exec ${listener_ns} \
 		nstat | grep Tcp > /tmp/${listener_ns}.out
@@ -1026,7 +1046,6 @@ do_transfer()
 		ip netns exec ${connector_ns} ss -Menita 1>&2 -o "dport = :$port"
 		cat /tmp/${connector_ns}.out
 
-		cat "$capout"
 		return 1
 	fi
 
@@ -1043,13 +1062,7 @@ do_transfer()
 	fi
 	rets=$?
 
-	if [ $retc -eq 0 ] && [ $rets -eq 0 ];then
-		cat "$capout"
-		return 0
-	fi
-
-	cat "$capout"
-	return 1
+	[ $retc -eq 0 ] && [ $rets -eq 0 ]
 }
 
 make_file()
@@ -2873,6 +2886,32 @@ verify_listener_events()
 	fail_test
 }
 
+chk_mpc_endp_attempt()
+{
+	local retl=$1
+	local attempts=$2
+
+	print_check "Connect"
+
+	if [ ${retl} = 124 ]; then
+		fail_test "timeout on connect"
+	elif [ ${retl} = 0 ]; then
+		fail_test "unexpected successful connect"
+	else
+		print_ok
+
+		print_check "Attempts"
+		count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPCapableEndpAttempt")
+		if [ -z "$count" ]; then
+			print_skip
+		elif [ "$count" != "$attempts" ]; then
+			fail_test "got ${count} MPC attempt[s] on port-based endpoint, expected ${attempts}"
+		else
+			print_ok
+		fi
+	fi
+}
+
 add_addr_ports_tests()
 {
 	# signal address with port
@@ -2963,6 +3002,22 @@ add_addr_ports_tests()
 		chk_join_nr 2 2 2
 		chk_add_nr 2 2 2
 	fi
+
+	if reset "port-based signal endpoint must not accept mpc"; then
+		local port retl count
+		port=$(get_port)
+
+		cond_start_capture ${ns1}
+		pm_nl_add_endpoint ${ns1} 10.0.2.1 flags signal port ${port}
+		mptcp_lib_wait_local_port_listen ${ns1} ${port}
+
+		timeout 1 ip netns exec ${ns2} \
+			./mptcp_connect -t ${timeout_poll} -p $port -s MPTCP 10.0.2.1 >/dev/null 2>&1
+		retl=$?
+		cond_stop_capture
+
+		chk_mpc_endp_attempt ${retl} 1
+	fi
 }
 
 syncookies_tests()
diff --git a/tools/testing/selftests/net/rds/test.py b/tools/testing/selftests/net/rds/test.py
index e6bb109bcead..4a7178d11193 100755
--- a/tools/testing/selftests/net/rds/test.py
+++ b/tools/testing/selftests/net/rds/test.py
@@ -14,8 +14,11 @@ import sys
 import atexit
 from pwd import getpwuid
 from os import stat
-from lib.py import ip
 
+# Allow utils module to be imported from different directory
+this_dir = os.path.dirname(os.path.realpath(__file__))
+sys.path.append(os.path.join(this_dir, "../"))
+from lib.py.utils import ip
 
 libc = ctypes.cdll.LoadLibrary('libc.so.6')
 setns = libc.setns