Merge branch 'mlxsw-Add-VxLAN-learning-support'

Ido Schimmel says:

====================
mlxsw: Add VxLAN learning support

This patchset adds VxLAN learning support in the mlxsw driver.

The first five patches from Petr add the required switchdev APIs which
allow device drivers to notify the VxLAN driver about learned / aged-out
FDB entries.

First in patch #1, an unnecessary argument is dropped from
__vxlan_fdb_delete().

In patches #2-#4, the VxLAN FDB handling code is extended to make
sending the switchdev events configurable; to mark user-added entries as
such; and to make sure HW-learned FDB entries do not take over
user-added ones.

Finally in patch #5, the necessary switchdev notifications are added and
handled by VxLAN, similarly to how this is handled in the bridge driver.

Patch #6 allows changing of the VxLAN's device ageing time since it is
useful for the selftest in the last patch.

Patch #7 adds support for querying bridge port flags of a given
netdevice, as a new entry should not be learned and notified to the
bridge driver in case learning is disabled on the bridge port.

Next patches gradually add learning support in mlxsw.

The last patch adds a new test case for VxLAN learning.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

2 files changed, 109 insertions, 1 deletions

diff --git a/tools/testing/selftests/drivers/net/mlxsw/vxlan.sh b/tools/testing/selftests/drivers/net/mlxsw/vxlan.sh
index 52e78adfe081..ffa79b738f2a 100755
--- a/tools/testing/selftests/drivers/net/mlxsw/vxlan.sh
+++ b/tools/testing/selftests/drivers/net/mlxsw/vxlan.sh
@@ -167,7 +167,7 @@ sanitization_single_dev_learning_enabled_test()
 	ip link add name vxlan0 up type vxlan id 10 learning noudpcsum \
 		ttl 20 tos inherit local 198.51.100.1 dstport 4789
 
-	sanitization_single_dev_test_fail
+	sanitization_single_dev_test_pass
 
 	ip link del dev vxlan0
 	ip link del dev br0
diff --git a/tools/testing/selftests/net/forwarding/vxlan_bridge_1d.sh b/tools/testing/selftests/net/forwarding/vxlan_bridge_1d.sh
index 5cc6ac74eb74..56cef3b1c194 100755
--- a/tools/testing/selftests/net/forwarding/vxlan_bridge_1d.sh
+++ b/tools/testing/selftests/net/forwarding/vxlan_bridge_1d.sh
@@ -76,6 +76,7 @@ export VXPORT
 	ping_ipv4
 	test_flood
 	test_unicast
+	test_learning
     "}
 
 NUM_NETIFS=6
@@ -663,6 +664,113 @@ test_ecn_decap()
 	test_ecn_decap_error
 }
 
+test_learning()
+{
+	local mac=de:ad:be:ef:13:37
+	local dst=192.0.2.100
+
+	# Enable learning on the VxLAN device and set ageing time to 10 seconds
+	ip link set dev br1 type bridge ageing_time 1000
+	ip link set dev vx1 type vxlan ageing 10
+	ip link set dev vx1 type vxlan learning
+	reapply_config
+
+	# Check that flooding works
+	RET=0
+
+	vxlan_flood_test $mac $dst 10 10 10
+
+	log_test "VXLAN: flood before learning"
+
+	# Send a packet with source mac set to $mac from host w2 and check that
+	# a corresponding entry is created in VxLAN device vx1
+	RET=0
+
+	in_ns ns1 $MZ w2 -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff -B $dst \
+		-t icmp -q
+	sleep 1
+
+	bridge fdb show brport vx1 | grep $mac | grep -q self
+	check_err $?
+	bridge fdb show brport vx1 | grep $mac | grep -q -v self
+	check_err $?
+
+	log_test "VXLAN: show learned FDB entry"
+
+	# Repeat first test and check that packets only reach host w2 in ns1
+	RET=0
+
+	vxlan_flood_test $mac $dst 0 10 0
+
+	log_test "VXLAN: learned FDB entry"
+
+	# Delete the learned FDB entry from the VxLAN and bridge devices and
+	# check that packets are flooded
+	RET=0
+
+	bridge fdb del dev vx1 $mac master self
+	sleep 1
+
+	vxlan_flood_test $mac $dst 10 10 10
+
+	log_test "VXLAN: deletion of learned FDB entry"
+
+	# Re-learn the first FDB entry and check that it is correctly aged-out
+	RET=0
+
+	in_ns ns1 $MZ w2 -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff -B $dst \
+		-t icmp -q
+	sleep 1
+
+	bridge fdb show brport vx1 | grep $mac | grep -q self
+	check_err $?
+	bridge fdb show brport vx1 | grep $mac | grep -q -v self
+	check_err $?
+
+	vxlan_flood_test $mac $dst 0 10 0
+
+	sleep 20
+
+	bridge fdb show brport vx1 | grep $mac | grep -q self
+	check_fail $?
+	bridge fdb show brport vx1 | grep $mac | grep -q -v self
+	check_fail $?
+
+	vxlan_flood_test $mac $dst 10 10 10
+
+	log_test "VXLAN: Ageing of learned FDB entry"
+
+	# Toggle learning on the bridge port and check that the bridge's FDB
+	# is populated only when it should
+	RET=0
+
+	ip link set dev vx1 type bridge_slave learning off
+
+	in_ns ns1 $MZ w2 -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff -B $dst \
+		-t icmp -q
+	sleep 1
+
+	bridge fdb show brport vx1 | grep $mac | grep -q -v self
+	check_fail $?
+
+	ip link set dev vx1 type bridge_slave learning on
+
+	in_ns ns1 $MZ w2 -c 1 -p 64 -a $mac -b ff:ff:ff:ff:ff:ff -B $dst \
+		-t icmp -q
+	sleep 1
+
+	bridge fdb show brport vx1 | grep $mac | grep -q -v self
+	check_err $?
+
+	log_test "VXLAN: learning toggling on bridge port"
+
+	# Restore previous settings
+	ip link set dev vx1 type vxlan nolearning
+	ip link set dev vx1 type vxlan ageing 300
+	ip link set dev br1 type bridge ageing_time 30000
+	reapply_config
+}
+
 test_all()
 {
 	echo "Running tests with UDP port $VXPORT"