platform/x86: int3472: Add handshake pin support

New Intel Meteor Lake based laptops with IPU6 cameras have a new type 0x12
pin defined in the INT3472 sensor companion device which describes
the sensor's GPIOs.

This pin is primarily used on designs with a Lattice FPGA chip which is
capable of running the sensor independently of the main CPU for features
like presence detection. This pin needs to be driven high to make the FPGA
run the power-on sequence of the sensor. After driving the pin high,
the FPGA "firmware" needs 25ms to complete the power-on sequence.

Add support for this modelling the handshake pin as a GPIO driven "dvdd"
regulator with a 25 ms enable time. This model was chosen because:

1. Sensor chips don't have a handshake pin, so we need to abstract this
   in some way which does not require modification to the sensor drivers,
   sensor drivers using the bulk-regulator API to get avdd + vddio + dvdd
   is normal. So this will work to get the right value set to the handshake
   pin without requiring sensor driver modifications.

2. Sensors typically wait only a small time for the sensor to power-on
   after de-asserting reset. Not the 25ms the Lattice chip requires.
   Using the regulator framework's enable_time allows hiding the need for
   this delay from the sensor drivers.

Link: https://lore.kernel.org/platform-driver-x86/59f672c3-6d87-4ec7-9b7f-f44fe2cce934@redhat.com/
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2341731
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: David Heidelberg <david@ixit.cz>  # Dell Latitude 9440
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20250417111337.38142-9-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

0 files changed, 0 insertions, 0 deletions