Merge tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
 "The most significant set of changes is the per netns RTNL. The new
  behavior is disabled by default, regression risk should be contained.

  Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
  default value from PTP_1588_CLOCK_KVM, as the first is intended to be
  a more reliable replacement for the latter.

  Core:

   - Started a very large, in-progress, effort to make the RTNL lock
     scope per network-namespace, thus reducing the lock contention
     significantly in the containerized use-case, comprising:
       - RCU-ified some relevant slices of the FIB control path
       - introduce basic per netns locking helpers
       - namespacified the IPv4 address hash table
       - remove rtnl_register{,_module}() in favour of
         rtnl_register_many()
       - refactor rtnl_{new,del,set}link() moving as much validation as
         possible out of RTNL lock
       - convert all phonet doit() and dumpit() handlers to RCU
       - convert IPv4 addresses manipulation to per-netns RTNL
       - convert virtual interface creation to per-netns RTNL
     the per-netns lock infrastructure is guarded by the
     CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim.

   - Introduce NAPI suspension, to efficiently switching between busy
     polling (NAPI processing suspended) and normal processing.

   - Migrate the IPv4 routing input, output and control path from direct
     ToS usage to DSCP macros. This is a work in progress to make ECN
     handling consistent and reliable.

   - Add drop reasons support to the IPv4 rotue input path, allowing
     better introspection in case of packets drop.

   - Make FIB seqnum lockless, dropping RTNL protection for read access.

   - Make inet{,v6} addresses hashing less predicable.

   - Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
     and timestamps

  Things we sprinkled into general kernel code:

   - Add small file operations for debugfs, to reduce the struct ops
     size.

   - Refactoring and optimization for the implementation of page_frag
     API, This is a preparatory work to consolidate the page_frag
     implementation.

  Netfilter:

   - Optimize set element transactions to reduce memory consumption

   - Extended netlink error reporting for attribute parser failure.

   - Make legacy xtables configs user selectable, giving users the
     option to configure iptables without enabling any other config.

   - Address a lot of false-positive RCU issues, pointed by recent CI
     improvements.

  BPF:

   - Put xsk sockets on a struct diet and add various cleanups. Overall,
     this helps to bump performance by 12% for some workloads.

   - Extend BPF selftests to increase coverage of XDP features in
     combination with BPF cpumap.

   - Optimize and homogenize bpf_csum_diff helper for all archs and also
     add a batch of new BPF selftests for it.

   - Extend netkit with an option to delegate skb->{mark,priority}
     scrubbing to its BPF program.

   - Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
     programs.

  Protocols:

   - Introduces 4-tuple hash for connected udp sockets, speeding-up
     significantly connected sockets lookup.

   - Add a fastpath for some TCP timers that usually expires after
     close, the socket lock contention.

   - Add inbound and outbound xfrm state caches to speed up state
     lookups.

   - Avoid sending MPTCP advertisements on stale subflows, reducing
     risks on loosing them.

   - Make neighbours table flushing more scalable, maintaining per
     device neigh lists.

  Driver API:

   - Introduce a unified interface to configure transmission H/W
     shaping, and expose it to user-space via generic-netlink.

   - Add support for per-NAPI config via netlink. This makes napi
     configuration persistent across queues removal and re-creation.
     Requires driver updates, currently supported drivers are:
     nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.

   - Add ethtool support for writing SFP / PHY firmware blocks.

   - Track RSS context allocation from ethtool core.

   - Implement support for mirroring to DSA CPU port, via TC mirror
     offload.

   - Consolidate FDB updates notification, to avoid duplicates on
     device-specific entries.

   - Expose DPLL clock quality level to the user-space.

   - Support master-slave PHY config via device tree.

  Tests and tooling:

   - forwarding: introduce deferred commands, to simplify the cleanup
     phase

  Drivers:

   - Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
     Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
     IRQs and queues to NAPI IDs, allowing busy polling and better
     introspection.

   - Ethernet high-speed NICs:
      - nVidia/Mellanox:
         - mlx5:
           - a large refactor to implement support for cross E-Switch
             scheduling
           - refactor H/W conter management to let it scale better
           - H/W GRO cleanups
      - Intel (100G, ice)::
         - add support for ethtool reset
         - implement support for per TX queue H/W shaping
      - AMD/Solarflare:
         - implement per device queue stats support
      - Broadcom (bnxt):
         - improve wildcard l4proto on IPv4/IPv6 ntuple rules
      - Marvell Octeon:
         - Add representor support for each Resource Virtualization Unit
           (RVU) device.
      - Hisilicon:
         - add support for the BMC Gigabit Ethernet
      - IBM (EMAC):
         - driver cleanup and modernization
      - Cisco (VIC):
         - raise the queues number limit to 256

   - Ethernet virtual:
      - Google vNIC:
         - implement page pool support
      - macsec:
         - inherit lower device's features and TSO limits when
           offloading
      - virtio_net:
         - enable premapped mode by default
         - support for XDP socket(AF_XDP) zerocopy TX
      - wireguard:
         - set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
           packets.

   - Ethernet NICs embedded and virtual:
      - Broadcom ASP:
         - enable software timestamping
      - Freescale:
         - add enetc4 PF driver
      - MediaTek: Airoha SoC:
         - implement BQL support
      - RealTek r8169:
         - enable TSO by default on r8168/r8125
         - implement extended ethtool stats
      - Renesas AVB:
         - enable TX checksum offload
      - Synopsys (stmmac):
         - support header splitting for vlan tagged packets
         - move common code for DWMAC4 and DWXGMAC into a separate FPE
           module.
         - add dwmac driver support for T-HEAD TH1520 SoC
      - Synopsys (xpcs):
         - driver refactor and cleanup
      - TI:
         - icssg_prueth: add VLAN offload support
      - Xilinx emaclite:
         - add clock support

   - Ethernet switches:
      - Microchip:
         - implement support for the lan969x Ethernet switch family
         - add LAN9646 switch support to KSZ DSA driver

   - Ethernet PHYs:
      - Marvel: 88q2x: enable auto negotiation
      - Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2

   - PTP:
      - Add support for the Amazon virtual clock device
      - Add PtP driver for s390 clocks

   - WiFi:
      - mac80211
         - EHT 1024 aggregation size for transmissions
         - new operation to indicate that a new interface is to be added
         - support radio separation of multi-band devices
         - move wireless extension spy implementation to libiw
      - Broadcom:
         - brcmfmac: optional LPO clock support
      - Microchip:
         - add support for Atmel WILC3000
      - Qualcomm (ath12k):
         - firmware coredump collection support
         - add debugfs support for a multitude of statistics
      - Qualcomm (ath5k):
         -  Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
      - Realtek:
         - rtw88: 8821au and 8812au USB adapters support
         - rtw89: add thermal protection
         - rtw89: fine tune BT-coexsitence to improve user experience
         - rtw89: firmware secure boot for WiFi 6 chip

   - Bluetooth
      - add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
        0x13d3:0x3623
      - add Realtek RTL8852BE support for id Foxconn 0xe123
      - add MediaTek MT7920 support for wireless module ids
      - btintel_pcie: add handshake between driver and firmware
      - btintel_pcie: add recovery mechanism
      - btnxpuart: add GPIO support to power save feature"

* tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1475 commits)
  mm: page_frag: fix a compile error when kernel is not compiled
  Documentation: tipc: fix formatting issue in tipc.rst
  selftests: nic_performance: Add selftest for performance of NIC driver
  selftests: nic_link_layer: Add selftest case for speed and duplex states
  selftests: nic_link_layer: Add link layer selftest for NIC driver
  bnxt_en: Add FW trace coredump segments to the coredump
  bnxt_en: Add a new ethtool -W dump flag
  bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr()
  bnxt_en: Add functions to copy host context memory
  bnxt_en: Do not free FW log context memory
  bnxt_en: Manage the FW trace context memory
  bnxt_en: Allocate backing store memory for FW trace logs
  bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem()
  bnxt_en: Refactor bnxt_free_ctx_mem()
  bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_type
  bnxt_en: Update firmware interface spec to 1.10.3.85
  selftests/bpf: Add some tests with sockmap SK_PASS
  bpf: fix recursive lock when verdict program return SK_PASS
  wireguard: device: support big tcp GSO
  wireguard: selftests: load nf_conntrack if not present
  ...

3 files changed, 559 insertions, 1 deletions

diff --git a/tools/include/uapi/asm-generic/socket.h b/tools/include/uapi/asm-generic/socket.h
index 54d9c8bf7c55..281df9139d2b 100644
--- a/tools/include/uapi/asm-generic/socket.h
+++ b/tools/include/uapi/asm-generic/socket.h
@@ -124,6 +124,8 @@
 #define SO_PASSPIDFD		76
 #define SO_PEERPIDFD		77
 
+#define SCM_TS_OPT_ID		78
+
 #if !defined(__KERNEL__)
 
 #if __BITS_PER_LONG == 64 || (defined(__x86_64__) && defined(__ILP32__))
diff --git a/tools/include/uapi/linux/if_link.h b/tools/include/uapi/linux/if_link.h
index f0d71b2a3f1e..8516c1ccd57a 100644
--- a/tools/include/uapi/linux/if_link.h
+++ b/tools/include/uapi/linux/if_link.h
@@ -377,6 +377,7 @@ enum {
 	IFLA_GSO_IPV4_MAX_SIZE,
 	IFLA_GRO_IPV4_MAX_SIZE,
 	IFLA_DPLL_PIN,
+	IFLA_MAX_PACING_OFFLOAD_HORIZON,
 	__IFLA_MAX
 };
 
@@ -461,6 +462,286 @@ enum in6_addr_gen_mode {
 
 /* Bridge section */
 
+/**
+ * DOC: Bridge enum definition
+ *
+ * Please *note* that the timer values in the following section are expected
+ * in clock_t format, which is seconds multiplied by USER_HZ (generally
+ * defined as 100).
+ *
+ * @IFLA_BR_FORWARD_DELAY
+ *   The bridge forwarding delay is the time spent in LISTENING state
+ *   (before moving to LEARNING) and in LEARNING state (before moving
+ *   to FORWARDING). Only relevant if STP is enabled.
+ *
+ *   The valid values are between (2 * USER_HZ) and (30 * USER_HZ).
+ *   The default value is (15 * USER_HZ).
+ *
+ * @IFLA_BR_HELLO_TIME
+ *   The time between hello packets sent by the bridge, when it is a root
+ *   bridge or a designated bridge. Only relevant if STP is enabled.
+ *
+ *   The valid values are between (1 * USER_HZ) and (10 * USER_HZ).
+ *   The default value is (2 * USER_HZ).
+ *
+ * @IFLA_BR_MAX_AGE
+ *   The hello packet timeout is the time until another bridge in the
+ *   spanning tree is assumed to be dead, after reception of its last hello
+ *   message. Only relevant if STP is enabled.
+ *
+ *   The valid values are between (6 * USER_HZ) and (40 * USER_HZ).
+ *   The default value is (20 * USER_HZ).
+ *
+ * @IFLA_BR_AGEING_TIME
+ *   Configure the bridge's FDB entries aging time. It is the time a MAC
+ *   address will be kept in the FDB after a packet has been received from
+ *   that address. After this time has passed, entries are cleaned up.
+ *   Allow values outside the 802.1 standard specification for special cases:
+ *
+ *     * 0 - entry never ages (all permanent)
+ *     * 1 - entry disappears (no persistence)
+ *
+ *   The default value is (300 * USER_HZ).
+ *
+ * @IFLA_BR_STP_STATE
+ *   Turn spanning tree protocol on (*IFLA_BR_STP_STATE* > 0) or off
+ *   (*IFLA_BR_STP_STATE* == 0) for this bridge.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_PRIORITY
+ *   Set this bridge's spanning tree priority, used during STP root bridge
+ *   election.
+ *
+ *   The valid values are between 0 and 65535.
+ *
+ * @IFLA_BR_VLAN_FILTERING
+ *   Turn VLAN filtering on (*IFLA_BR_VLAN_FILTERING* > 0) or off
+ *   (*IFLA_BR_VLAN_FILTERING* == 0). When disabled, the bridge will not
+ *   consider the VLAN tag when handling packets.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_VLAN_PROTOCOL
+ *   Set the protocol used for VLAN filtering.
+ *
+ *   The valid values are 0x8100(802.1Q) or 0x88A8(802.1AD). The default value
+ *   is 0x8100(802.1Q).
+ *
+ * @IFLA_BR_GROUP_FWD_MASK
+ *   The group forwarding mask. This is the bitmask that is applied to
+ *   decide whether to forward incoming frames destined to link-local
+ *   addresses (of the form 01:80:C2:00:00:0X).
+ *
+ *   The default value is 0, which means the bridge does not forward any
+ *   link-local frames coming on this port.
+ *
+ * @IFLA_BR_ROOT_ID
+ *   The bridge root id, read only.
+ *
+ * @IFLA_BR_BRIDGE_ID
+ *   The bridge id, read only.
+ *
+ * @IFLA_BR_ROOT_PORT
+ *   The bridge root port, read only.
+ *
+ * @IFLA_BR_ROOT_PATH_COST
+ *   The bridge root path cost, read only.
+ *
+ * @IFLA_BR_TOPOLOGY_CHANGE
+ *   The bridge topology change, read only.
+ *
+ * @IFLA_BR_TOPOLOGY_CHANGE_DETECTED
+ *   The bridge topology change detected, read only.
+ *
+ * @IFLA_BR_HELLO_TIMER
+ *   The bridge hello timer, read only.
+ *
+ * @IFLA_BR_TCN_TIMER
+ *   The bridge tcn timer, read only.
+ *
+ * @IFLA_BR_TOPOLOGY_CHANGE_TIMER
+ *   The bridge topology change timer, read only.
+ *
+ * @IFLA_BR_GC_TIMER
+ *   The bridge gc timer, read only.
+ *
+ * @IFLA_BR_GROUP_ADDR
+ *   Set the MAC address of the multicast group this bridge uses for STP.
+ *   The address must be a link-local address in standard Ethernet MAC address
+ *   format. It is an address of the form 01:80:C2:00:00:0X, with X in [0, 4..f].
+ *
+ *   The default value is 0.
+ *
+ * @IFLA_BR_FDB_FLUSH
+ *   Flush bridge's fdb dynamic entries.
+ *
+ * @IFLA_BR_MCAST_ROUTER
+ *   Set bridge's multicast router if IGMP snooping is enabled.
+ *   The valid values are:
+ *
+ *     * 0 - disabled.
+ *     * 1 - automatic (queried).
+ *     * 2 - permanently enabled.
+ *
+ *   The default value is 1.
+ *
+ * @IFLA_BR_MCAST_SNOOPING
+ *   Turn multicast snooping on (*IFLA_BR_MCAST_SNOOPING* > 0) or off
+ *   (*IFLA_BR_MCAST_SNOOPING* == 0).
+ *
+ *   The default value is 1.
+ *
+ * @IFLA_BR_MCAST_QUERY_USE_IFADDR
+ *   If enabled use the bridge's own IP address as source address for IGMP
+ *   queries (*IFLA_BR_MCAST_QUERY_USE_IFADDR* > 0) or the default of 0.0.0.0
+ *   (*IFLA_BR_MCAST_QUERY_USE_IFADDR* == 0).
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_MCAST_QUERIER
+ *   Enable (*IFLA_BR_MULTICAST_QUERIER* > 0) or disable
+ *   (*IFLA_BR_MULTICAST_QUERIER* == 0) IGMP querier, ie sending of multicast
+ *   queries by the bridge.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_MCAST_HASH_ELASTICITY
+ *   Set multicast database hash elasticity, It is the maximum chain length in
+ *   the multicast hash table. This attribute is *deprecated* and the value
+ *   is always 16.
+ *
+ * @IFLA_BR_MCAST_HASH_MAX
+ *   Set maximum size of the multicast hash table
+ *
+ *   The default value is 4096, the value must be a power of 2.
+ *
+ * @IFLA_BR_MCAST_LAST_MEMBER_CNT
+ *   The Last Member Query Count is the number of Group-Specific Queries
+ *   sent before the router assumes there are no local members. The Last
+ *   Member Query Count is also the number of Group-and-Source-Specific
+ *   Queries sent before the router assumes there are no listeners for a
+ *   particular source.
+ *
+ *   The default value is 2.
+ *
+ * @IFLA_BR_MCAST_STARTUP_QUERY_CNT
+ *   The Startup Query Count is the number of Queries sent out on startup,
+ *   separated by the Startup Query Interval.
+ *
+ *   The default value is 2.
+ *
+ * @IFLA_BR_MCAST_LAST_MEMBER_INTVL
+ *   The Last Member Query Interval is the Max Response Time inserted into
+ *   Group-Specific Queries sent in response to Leave Group messages, and
+ *   is also the amount of time between Group-Specific Query messages.
+ *
+ *   The default value is (1 * USER_HZ).
+ *
+ * @IFLA_BR_MCAST_MEMBERSHIP_INTVL
+ *   The interval after which the bridge will leave a group, if no membership
+ *   reports for this group are received.
+ *
+ *   The default value is (260 * USER_HZ).
+ *
+ * @IFLA_BR_MCAST_QUERIER_INTVL
+ *   The interval between queries sent by other routers. if no queries are
+ *   seen after this delay has passed, the bridge will start to send its own
+ *   queries (as if *IFLA_BR_MCAST_QUERIER_INTVL* was enabled).
+ *
+ *   The default value is (255 * USER_HZ).
+ *
+ * @IFLA_BR_MCAST_QUERY_INTVL
+ *   The Query Interval is the interval between General Queries sent by
+ *   the Querier.
+ *
+ *   The default value is (125 * USER_HZ). The minimum value is (1 * USER_HZ).
+ *
+ * @IFLA_BR_MCAST_QUERY_RESPONSE_INTVL
+ *   The Max Response Time used to calculate the Max Resp Code inserted
+ *   into the periodic General Queries.
+ *
+ *   The default value is (10 * USER_HZ).
+ *
+ * @IFLA_BR_MCAST_STARTUP_QUERY_INTVL
+ *   The interval between queries in the startup phase.
+ *
+ *   The default value is (125 * USER_HZ) / 4. The minimum value is (1 * USER_HZ).
+ *
+ * @IFLA_BR_NF_CALL_IPTABLES
+ *   Enable (*NF_CALL_IPTABLES* > 0) or disable (*NF_CALL_IPTABLES* == 0)
+ *   iptables hooks on the bridge.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_NF_CALL_IP6TABLES
+ *   Enable (*NF_CALL_IP6TABLES* > 0) or disable (*NF_CALL_IP6TABLES* == 0)
+ *   ip6tables hooks on the bridge.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_NF_CALL_ARPTABLES
+ *   Enable (*NF_CALL_ARPTABLES* > 0) or disable (*NF_CALL_ARPTABLES* == 0)
+ *   arptables hooks on the bridge.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_VLAN_DEFAULT_PVID
+ *   VLAN ID applied to untagged and priority-tagged incoming packets.
+ *
+ *   The default value is 1. Setting to the special value 0 makes all ports of
+ *   this bridge not have a PVID by default, which means that they will
+ *   not accept VLAN-untagged traffic.
+ *
+ * @IFLA_BR_PAD
+ *   Bridge attribute padding type for netlink message.
+ *
+ * @IFLA_BR_VLAN_STATS_ENABLED
+ *   Enable (*IFLA_BR_VLAN_STATS_ENABLED* == 1) or disable
+ *   (*IFLA_BR_VLAN_STATS_ENABLED* == 0) per-VLAN stats accounting.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_MCAST_STATS_ENABLED
+ *   Enable (*IFLA_BR_MCAST_STATS_ENABLED* > 0) or disable
+ *   (*IFLA_BR_MCAST_STATS_ENABLED* == 0) multicast (IGMP/MLD) stats
+ *   accounting.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_MCAST_IGMP_VERSION
+ *   Set the IGMP version.
+ *
+ *   The valid values are 2 and 3. The default value is 2.
+ *
+ * @IFLA_BR_MCAST_MLD_VERSION
+ *   Set the MLD version.
+ *
+ *   The valid values are 1 and 2. The default value is 1.
+ *
+ * @IFLA_BR_VLAN_STATS_PER_PORT
+ *   Enable (*IFLA_BR_VLAN_STATS_PER_PORT* == 1) or disable
+ *   (*IFLA_BR_VLAN_STATS_PER_PORT* == 0) per-VLAN per-port stats accounting.
+ *   Can be changed only when there are no port VLANs configured.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_MULTI_BOOLOPT
+ *   The multi_boolopt is used to control new boolean options to avoid adding
+ *   new netlink attributes. You can look at ``enum br_boolopt_id`` for those
+ *   options.
+ *
+ * @IFLA_BR_MCAST_QUERIER_STATE
+ *   Bridge mcast querier states, read only.
+ *
+ * @IFLA_BR_FDB_N_LEARNED
+ *   The number of dynamically learned FDB entries for the current bridge,
+ *   read only.
+ *
+ * @IFLA_BR_FDB_MAX_LEARNED
+ *   Set the number of max dynamically learned FDB entries for the current
+ *   bridge.
+ */
 enum {
 	IFLA_BR_UNSPEC,
 	IFLA_BR_FORWARD_DELAY,
@@ -510,6 +791,8 @@ enum {
 	IFLA_BR_VLAN_STATS_PER_PORT,
 	IFLA_BR_MULTI_BOOLOPT,
 	IFLA_BR_MCAST_QUERIER_STATE,
+	IFLA_BR_FDB_N_LEARNED,
+	IFLA_BR_FDB_MAX_LEARNED,
 	__IFLA_BR_MAX,
 };
 
@@ -520,11 +803,252 @@ struct ifla_bridge_id {
 	__u8	addr[6]; /* ETH_ALEN */
 };
 
+/**
+ * DOC: Bridge mode enum definition
+ *
+ * @BRIDGE_MODE_HAIRPIN
+ *   Controls whether traffic may be sent back out of the port on which it
+ *   was received. This option is also called reflective relay mode, and is
+ *   used to support basic VEPA (Virtual Ethernet Port Aggregator)
+ *   capabilities. By default, this flag is turned off and the bridge will
+ *   not forward traffic back out of the receiving port.
+ */
 enum {
 	BRIDGE_MODE_UNSPEC,
 	BRIDGE_MODE_HAIRPIN,
 };
 
+/**
+ * DOC: Bridge port enum definition
+ *
+ * @IFLA_BRPORT_STATE
+ *   The operation state of the port. Here are the valid values.
+ *
+ *     * 0 - port is in STP *DISABLED* state. Make this port completely
+ *       inactive for STP. This is also called BPDU filter and could be used
+ *       to disable STP on an untrusted port, like a leaf virtual device.
+ *       The traffic forwarding is also stopped on this port.
+ *     * 1 - port is in STP *LISTENING* state. Only valid if STP is enabled
+ *       on the bridge. In this state the port listens for STP BPDUs and
+ *       drops all other traffic frames.
+ *     * 2 - port is in STP *LEARNING* state. Only valid if STP is enabled on
+ *       the bridge. In this state the port will accept traffic only for the
+ *       purpose of updating MAC address tables.
+ *     * 3 - port is in STP *FORWARDING* state. Port is fully active.
+ *     * 4 - port is in STP *BLOCKING* state. Only valid if STP is enabled on
+ *       the bridge. This state is used during the STP election process.
+ *       In this state, port will only process STP BPDUs.
+ *
+ * @IFLA_BRPORT_PRIORITY
+ *   The STP port priority. The valid values are between 0 and 255.
+ *
+ * @IFLA_BRPORT_COST
+ *   The STP path cost of the port. The valid values are between 1 and 65535.
+ *
+ * @IFLA_BRPORT_MODE
+ *   Set the bridge port mode. See *BRIDGE_MODE_HAIRPIN* for more details.
+ *
+ * @IFLA_BRPORT_GUARD
+ *   Controls whether STP BPDUs will be processed by the bridge port. By
+ *   default, the flag is turned off to allow BPDU processing. Turning this
+ *   flag on will disable the bridge port if a STP BPDU packet is received.
+ *
+ *   If the bridge has Spanning Tree enabled, hostile devices on the network
+ *   may send BPDU on a port and cause network failure. Setting *guard on*
+ *   will detect and stop this by disabling the port. The port will be
+ *   restarted if the link is brought down, or removed and reattached.
+ *
+ * @IFLA_BRPORT_PROTECT
+ *   Controls whether a given port is allowed to become a root port or not.
+ *   Only used when STP is enabled on the bridge. By default the flag is off.
+ *
+ *   This feature is also called root port guard. If BPDU is received from a
+ *   leaf (edge) port, it should not be elected as root port. This could
+ *   be used if using STP on a bridge and the downstream bridges are not fully
+ *   trusted; this prevents a hostile guest from rerouting traffic.
+ *
+ * @IFLA_BRPORT_FAST_LEAVE
+ *   This flag allows the bridge to immediately stop multicast traffic
+ *   forwarding on a port that receives an IGMP Leave message. It is only used
+ *   when IGMP snooping is enabled on the bridge. By default the flag is off.
+ *
+ * @IFLA_BRPORT_LEARNING
+ *   Controls whether a given port will learn *source* MAC addresses from
+ *   received traffic or not. Also controls whether dynamic FDB entries
+ *   (which can also be added by software) will be refreshed by incoming
+ *   traffic. By default this flag is on.
+ *
+ * @IFLA_BRPORT_UNICAST_FLOOD
+ *   Controls whether unicast traffic for which there is no FDB entry will
+ *   be flooded towards this port. By default this flag is on.
+ *
+ * @IFLA_BRPORT_PROXYARP
+ *   Enable proxy ARP on this port.
+ *
+ * @IFLA_BRPORT_LEARNING_SYNC
+ *   Controls whether a given port will sync MAC addresses learned on device
+ *   port to bridge FDB.
+ *
+ * @IFLA_BRPORT_PROXYARP_WIFI
+ *   Enable proxy ARP on this port which meets extended requirements by
+ *   IEEE 802.11 and Hotspot 2.0 specifications.
+ *
+ * @IFLA_BRPORT_ROOT_ID
+ *
+ * @IFLA_BRPORT_BRIDGE_ID
+ *
+ * @IFLA_BRPORT_DESIGNATED_PORT
+ *
+ * @IFLA_BRPORT_DESIGNATED_COST
+ *
+ * @IFLA_BRPORT_ID
+ *
+ * @IFLA_BRPORT_NO
+ *
+ * @IFLA_BRPORT_TOPOLOGY_CHANGE_ACK
+ *
+ * @IFLA_BRPORT_CONFIG_PENDING
+ *
+ * @IFLA_BRPORT_MESSAGE_AGE_TIMER
+ *
+ * @IFLA_BRPORT_FORWARD_DELAY_TIMER
+ *
+ * @IFLA_BRPORT_HOLD_TIMER
+ *
+ * @IFLA_BRPORT_FLUSH
+ *   Flush bridge ports' fdb dynamic entries.
+ *
+ * @IFLA_BRPORT_MULTICAST_ROUTER
+ *   Configure the port's multicast router presence. A port with
+ *   a multicast router will receive all multicast traffic.
+ *   The valid values are:
+ *
+ *     * 0 disable multicast routers on this port
+ *     * 1 let the system detect the presence of routers (default)
+ *     * 2 permanently enable multicast traffic forwarding on this port
+ *     * 3 enable multicast routers temporarily on this port, not depending
+ *         on incoming queries.
+ *
+ * @IFLA_BRPORT_PAD
+ *
+ * @IFLA_BRPORT_MCAST_FLOOD
+ *   Controls whether a given port will flood multicast traffic for which
+ *   there is no MDB entry. By default this flag is on.
+ *
+ * @IFLA_BRPORT_MCAST_TO_UCAST
+ *   Controls whether a given port will replicate packets using unicast
+ *   instead of multicast. By default this flag is off.
+ *
+ *   This is done by copying the packet per host and changing the multicast
+ *   destination MAC to a unicast one accordingly.
+ *
+ *   *mcast_to_unicast* works on top of the multicast snooping feature of the
+ *   bridge. Which means unicast copies are only delivered to hosts which
+ *   are interested in unicast and signaled this via IGMP/MLD reports previously.
+ *
+ *   This feature is intended for interface types which have a more reliable
+ *   and/or efficient way to deliver unicast packets than broadcast ones
+ *   (e.g. WiFi).
+ *
+ *   However, it should only be enabled on interfaces where no IGMPv2/MLDv1
+ *   report suppression takes place. IGMP/MLD report suppression issue is
+ *   usually overcome by the network daemon (supplicant) enabling AP isolation
+ *   and by that separating all STAs.
+ *
+ *   Delivery of STA-to-STA IP multicast is made possible again by enabling
+ *   and utilizing the bridge hairpin mode, which considers the incoming port
+ *   as a potential outgoing port, too (see *BRIDGE_MODE_HAIRPIN* option).
+ *   Hairpin mode is performed after multicast snooping, therefore leading
+ *   to only deliver reports to STAs running a multicast router.
+ *
+ * @IFLA_BRPORT_VLAN_TUNNEL
+ *   Controls whether vlan to tunnel mapping is enabled on the port.
+ *   By default this flag is off.
+ *
+ * @IFLA_BRPORT_BCAST_FLOOD
+ *   Controls flooding of broadcast traffic on the given port. By default
+ *   this flag is on.
+ *
+ * @IFLA_BRPORT_GROUP_FWD_MASK
+ *   Set the group forward mask. This is a bitmask that is applied to
+ *   decide whether to forward incoming frames destined to link-local
+ *   addresses. The addresses of the form are 01:80:C2:00:00:0X (defaults
+ *   to 0, which means the bridge does not forward any link-local frames
+ *   coming on this port).
+ *
+ * @IFLA_BRPORT_NEIGH_SUPPRESS
+ *   Controls whether neighbor discovery (arp and nd) proxy and suppression
+ *   is enabled on the port. By default this flag is off.
+ *
+ * @IFLA_BRPORT_ISOLATED
+ *   Controls whether a given port will be isolated, which means it will be
+ *   able to communicate with non-isolated ports only. By default this
+ *   flag is off.
+ *
+ * @IFLA_BRPORT_BACKUP_PORT
+ *   Set a backup port. If the port loses carrier all traffic will be
+ *   redirected to the configured backup port. Set the value to 0 to disable
+ *   it.
+ *
+ * @IFLA_BRPORT_MRP_RING_OPEN
+ *
+ * @IFLA_BRPORT_MRP_IN_OPEN
+ *
+ * @IFLA_BRPORT_MCAST_EHT_HOSTS_LIMIT
+ *   The number of per-port EHT hosts limit. The default value is 512.
+ *   Setting to 0 is not allowed.
+ *
+ * @IFLA_BRPORT_MCAST_EHT_HOSTS_CNT
+ *   The current number of tracked hosts, read only.
+ *
+ * @IFLA_BRPORT_LOCKED
+ *   Controls whether a port will be locked, meaning that hosts behind the
+ *   port will not be able to communicate through the port unless an FDB
+ *   entry with the unit's MAC address is in the FDB. The common use case is
+ *   that hosts are allowed access through authentication with the IEEE 802.1X
+ *   protocol or based on whitelists. By default this flag is off.
+ *
+ *   Please note that secure 802.1X deployments should always use the
+ *   *BR_BOOLOPT_NO_LL_LEARN* flag, to not permit the bridge to populate its
+ *   FDB based on link-local (EAPOL) traffic received on the port.
+ *
+ * @IFLA_BRPORT_MAB
+ *   Controls whether a port will use MAC Authentication Bypass (MAB), a
+ *   technique through which select MAC addresses may be allowed on a locked
+ *   port, without using 802.1X authentication. Packets with an unknown source
+ *   MAC address generates a "locked" FDB entry on the incoming bridge port.
+ *   The common use case is for user space to react to these bridge FDB
+ *   notifications and optionally replace the locked FDB entry with a normal
+ *   one, allowing traffic to pass for whitelisted MAC addresses.
+ *
+ *   Setting this flag also requires *IFLA_BRPORT_LOCKED* and
+ *   *IFLA_BRPORT_LEARNING*. *IFLA_BRPORT_LOCKED* ensures that unauthorized
+ *   data packets are dropped, and *IFLA_BRPORT_LEARNING* allows the dynamic
+ *   FDB entries installed by user space (as replacements for the locked FDB
+ *   entries) to be refreshed and/or aged out.
+ *
+ * @IFLA_BRPORT_MCAST_N_GROUPS
+ *
+ * @IFLA_BRPORT_MCAST_MAX_GROUPS
+ *   Sets the maximum number of MDB entries that can be registered for a
+ *   given port. Attempts to register more MDB entries at the port than this
+ *   limit allows will be rejected, whether they are done through netlink
+ *   (e.g. the bridge tool), or IGMP or MLD membership reports. Setting a
+ *   limit of 0 disables the limit. The default value is 0.
+ *
+ * @IFLA_BRPORT_NEIGH_VLAN_SUPPRESS
+ *   Controls whether neighbor discovery (arp and nd) proxy and suppression is
+ *   enabled for a given port. By default this flag is off.
+ *
+ *   Note that this option only takes effect when *IFLA_BRPORT_NEIGH_SUPPRESS*
+ *   is enabled for a given port.
+ *
+ * @IFLA_BRPORT_BACKUP_NHID
+ *   The FDB nexthop object ID to attach to packets being redirected to a
+ *   backup port that has VLAN tunnel mapping enabled (via the
+ *   *IFLA_BRPORT_VLAN_TUNNEL* option). Setting a value of 0 (default) has
+ *   the effect of not attaching any ID.
+ */
 enum {
 	IFLA_BRPORT_UNSPEC,
 	IFLA_BRPORT_STATE,	/* Spanning tree state     */
@@ -769,6 +1293,19 @@ enum netkit_mode {
 	NETKIT_L3,
 };
 
+/* NETKIT_SCRUB_NONE leaves clearing skb->{mark,priority} up to
+ * the BPF program if attached. This also means the latter can
+ * consume the two fields if they were populated earlier.
+ *
+ * NETKIT_SCRUB_DEFAULT zeroes skb->{mark,priority} fields before
+ * invoking the attached BPF program when the peer device resides
+ * in a different network namespace. This is the default behavior.
+ */
+enum netkit_scrub {
+	NETKIT_SCRUB_NONE,
+	NETKIT_SCRUB_DEFAULT,
+};
+
 enum {
 	IFLA_NETKIT_UNSPEC,
 	IFLA_NETKIT_PEER_INFO,
@@ -776,6 +1313,8 @@ enum {
 	IFLA_NETKIT_POLICY,
 	IFLA_NETKIT_PEER_POLICY,
 	IFLA_NETKIT_MODE,
+	IFLA_NETKIT_SCRUB,
+	IFLA_NETKIT_PEER_SCRUB,
 	__IFLA_NETKIT_MAX,
 };
 #define IFLA_NETKIT_MAX	(__IFLA_NETKIT_MAX - 1)
@@ -854,6 +1393,7 @@ enum {
 	IFLA_VXLAN_DF,
 	IFLA_VXLAN_VNIFILTER, /* only applicable with COLLECT_METADATA mode */
 	IFLA_VXLAN_LOCALBYPASS,
+	IFLA_VXLAN_LABEL_POLICY, /* IPv6 flow label policy; ifla_vxlan_label_policy */
 	__IFLA_VXLAN_MAX
 };
 #define IFLA_VXLAN_MAX	(__IFLA_VXLAN_MAX - 1)
@@ -871,6 +1411,13 @@ enum ifla_vxlan_df {
 	VXLAN_DF_MAX = __VXLAN_DF_END - 1,
 };
 
+enum ifla_vxlan_label_policy {
+	VXLAN_LABEL_FIXED = 0,
+	VXLAN_LABEL_INHERIT = 1,
+	__VXLAN_LABEL_END,
+	VXLAN_LABEL_MAX = __VXLAN_LABEL_END - 1,
+};
+
 /* GENEVE section */
 enum {
 	IFLA_GENEVE_UNSPEC,
@@ -935,6 +1482,8 @@ enum {
 	IFLA_GTP_ROLE,
 	IFLA_GTP_CREATE_SOCKETS,
 	IFLA_GTP_RESTART_COUNT,
+	IFLA_GTP_LOCAL,
+	IFLA_GTP_LOCAL6,
 	__IFLA_GTP_MAX,
 };
 #define IFLA_GTP_MAX (__IFLA_GTP_MAX - 1)
@@ -1240,6 +1789,7 @@ enum {
 	IFLA_HSR_PROTOCOL,		/* Indicate different protocol than
 					 * HSR. For example PRP.
 					 */
+	IFLA_HSR_INTERLINK,		/* HSR interlink network device */
 	__IFLA_HSR_MAX,
 };
 
@@ -1417,7 +1967,9 @@ enum {
 
 enum {
 	IFLA_DSA_UNSPEC,
-	IFLA_DSA_MASTER,
+	IFLA_DSA_CONDUIT,
+	/* Deprecated, use IFLA_DSA_CONDUIT instead */
+	IFLA_DSA_MASTER = IFLA_DSA_CONDUIT,
 	__IFLA_DSA_MAX,
 };
 
diff --git a/tools/include/uapi/linux/netdev.h b/tools/include/uapi/linux/netdev.h
index 7c308f04e7a0..e4be227d3ad6 100644
--- a/tools/include/uapi/linux/netdev.h
+++ b/tools/include/uapi/linux/netdev.h
@@ -122,6 +122,9 @@ enum {
 	NETDEV_A_NAPI_ID,
 	NETDEV_A_NAPI_IRQ,
 	NETDEV_A_NAPI_PID,
+	NETDEV_A_NAPI_DEFER_HARD_IRQS,
+	NETDEV_A_NAPI_GRO_FLUSH_TIMEOUT,
+	NETDEV_A_NAPI_IRQ_SUSPEND_TIMEOUT,
 
 	__NETDEV_A_NAPI_MAX,
 	NETDEV_A_NAPI_MAX = (__NETDEV_A_NAPI_MAX - 1)
@@ -199,6 +202,7 @@ enum {
 	NETDEV_CMD_NAPI_GET,
 	NETDEV_CMD_QSTATS_GET,
 	NETDEV_CMD_BIND_RX,
+	NETDEV_CMD_NAPI_SET,
 
 	__NETDEV_CMD_MAX,
 	NETDEV_CMD_MAX = (__NETDEV_CMD_MAX - 1)