Merge branch 'drm-intel-next' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

drm-intel-next-2014-01-10:
- final bits for runtime D3 on Haswell from Paul (now enabled fully)
- parse the backlight modulation freq information in the VBT from Jani
  (but not yet used)
- more watermark improvements from Ville for ilk-ivb and bdw
- bugfixes for fastboot from Jesse
- watermark fix for i830M (but not yet everything)
- vlv vga hotplug w/a (Imre)
- piles of other small improvements, cleanups and fixes all over

Note that the pull request includes a backmerge of the last drm-fixes
pulled into Linus' tree - things where getting a bit too messy. So the
shortlog also contains a bunch of patches from Linus tree. Please yell if
you want me to frob it for you a bit.

* 'drm-intel-next' of git://people.freedesktop.org/~danvet/drm-intel: (609 commits)
  drm/i915/bdw: make sure south port interrupts are enabled properly v2
  drm/i915: Include more information in disabled hotplug interrupt warning
  drm/i915: Only complain about a rogue hotplug IRQ after disabling
  drm/i915: Only WARN about a stuck hotplug irq ONCE
  drm/i915: s/hotplugt_status_gen4/hotplug_status_g4x/

4 files changed, 22 insertions, 5 deletions

diff --git a/sound/soc/codecs/wm5110.c b/sound/soc/codecs/wm5110.c
index 99b359e19d35..0ab2dc296474 100644
--- a/sound/soc/codecs/wm5110.c
+++ b/sound/soc/codecs/wm5110.c
@@ -1012,7 +1012,7 @@ static const struct snd_soc_dapm_route wm5110_dapm_routes[] = {
 	{ "AEC Loopback", "HPOUT3L", "OUT3L" },
 	{ "AEC Loopback", "HPOUT3R", "OUT3R" },
 	{ "HPOUT3L", NULL, "OUT3L" },
-	{ "HPOUT3R", NULL, "OUT3L" },
+	{ "HPOUT3R", NULL, "OUT3R" },
 
 	{ "AEC Loopback", "SPKOUTL", "OUT4L" },
 	{ "SPKOUTLN", NULL, "OUT4L" },
diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c
index 3938fb1c203e..53bbfac6a83a 100644
--- a/sound/soc/codecs/wm8904.c
+++ b/sound/soc/codecs/wm8904.c
@@ -1444,7 +1444,7 @@ static int wm8904_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 
 	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
 	case SND_SOC_DAIFMT_DSP_B:
-		aif1 |= WM8904_AIF_LRCLK_INV;
+		aif1 |= 0x3 | WM8904_AIF_LRCLK_INV;
 	case SND_SOC_DAIFMT_DSP_A:
 		aif1 |= 0x3;
 		break;
diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index 543c5c2631b6..0f17ed3e29f4 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -2439,7 +2439,20 @@ static void wm8962_configure_bclk(struct snd_soc_codec *codec)
 	snd_soc_update_bits(codec, WM8962_CLOCKING_4,
 			    WM8962_SYSCLK_RATE_MASK, clocking4);
 
+	/* DSPCLK_DIV can be only generated correctly after enabling SYSCLK.
+	 * So we here provisionally enable it and then disable it afterward
+	 * if current bias_level hasn't reached SND_SOC_BIAS_ON.
+	 */
+	if (codec->dapm.bias_level != SND_SOC_BIAS_ON)
+		snd_soc_update_bits(codec, WM8962_CLOCKING2,
+				WM8962_SYSCLK_ENA_MASK, WM8962_SYSCLK_ENA);
+
 	dspclk = snd_soc_read(codec, WM8962_CLOCKING1);
+
+	if (codec->dapm.bias_level != SND_SOC_BIAS_ON)
+		snd_soc_update_bits(codec, WM8962_CLOCKING2,
+				WM8962_SYSCLK_ENA_MASK, 0);
+
 	if (dspclk < 0) {
 		dev_err(codec->dev, "Failed to read DSPCLK: %d\n", dspclk);
 		return;
diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c
index 46ec0e9744d4..4fbcab63e61f 100644
--- a/sound/soc/codecs/wm_adsp.c
+++ b/sound/soc/codecs/wm_adsp.c
@@ -1474,13 +1474,17 @@ static int wm_adsp2_ena(struct wm_adsp *dsp)
 		return ret;
 
 	/* Wait for the RAM to start, should be near instantaneous */
-	count = 0;
-	do {
+	for (count = 0; count < 10; ++count) {
 		ret = regmap_read(dsp->regmap, dsp->base + ADSP2_STATUS1,
 				  &val);
 		if (ret != 0)
 			return ret;
-	} while (!(val & ADSP2_RAM_RDY) && ++count < 10);
+
+		if (val & ADSP2_RAM_RDY)
+			break;
+
+		msleep(1);
+	}
 
 	if (!(val & ADSP2_RAM_RDY)) {
 		adsp_err(dsp, "Failed to start DSP RAM\n");