Merge branch 'mlx4-qcn'

Or Gerlitz says:

====================
Add QCN support to the DCB NL layer

This series from Shani Michaeli adds support for the IEEE QCN attribute
to the kernel DCB NL stack, and implementation in the mlx4 driver which
programs the firmware according to the admin directives.

changes from V0:

 - applied feedback from John and added his acked-by to patch #1
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

4 files changed, 84 insertions, 1 deletions

diff --git a/include/linux/mlx4/cmd.h b/include/linux/mlx4/cmd.h
index 7b6d4e9ff603..7299e9548906 100644
--- a/include/linux/mlx4/cmd.h
+++ b/include/linux/mlx4/cmd.h
@@ -163,6 +163,9 @@ enum {
 	MLX4_QP_FLOW_STEERING_ATTACH = 0x65,
 	MLX4_QP_FLOW_STEERING_DETACH = 0x66,
 	MLX4_FLOW_STEERING_IB_UC_QP_RANGE = 0x64,
+
+	/* Update and read QCN parameters */
+	MLX4_CMD_CONGESTION_CTRL_OPCODE = 0x68,
 };
 
 enum {
@@ -233,6 +236,16 @@ struct mlx4_config_dev_params {
 	u8	rx_csum_flags_port_2;
 };
 
+enum mlx4_en_congestion_control_algorithm {
+	MLX4_CTRL_ALGO_802_1_QAU_REACTION_POINT = 0,
+};
+
+enum mlx4_en_congestion_control_opmod {
+	MLX4_CONGESTION_CONTROL_GET_PARAMS,
+	MLX4_CONGESTION_CONTROL_GET_STATISTICS,
+	MLX4_CONGESTION_CONTROL_SET_PARAMS = 4,
+};
+
 struct mlx4_dev;
 
 struct mlx4_cmd_mailbox {
diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h
index e4ebff7e9d02..1cc54822b931 100644
--- a/include/linux/mlx4/device.h
+++ b/include/linux/mlx4/device.h
@@ -203,7 +203,8 @@ enum {
 	MLX4_DEV_CAP_FLAG2_80_VFS		= 1LL <<  18,
 	MLX4_DEV_CAP_FLAG2_FS_A0		= 1LL <<  19,
 	MLX4_DEV_CAP_FLAG2_RECOVERABLE_ERROR_EVENT = 1LL << 20,
-	MLX4_DEV_CAP_FLAG2_PORT_REMAP		= 1LL <<  21
+	MLX4_DEV_CAP_FLAG2_PORT_REMAP		= 1LL <<  21,
+	MLX4_DEV_CAP_FLAG2_QCN			= 1LL <<  22,
 };
 
 enum {
diff --git a/include/net/dcbnl.h b/include/net/dcbnl.h
index 597b88a94332..207d9ba1f92c 100644
--- a/include/net/dcbnl.h
+++ b/include/net/dcbnl.h
@@ -49,6 +49,9 @@ struct dcbnl_rtnl_ops {
 	int (*ieee_setets) (struct net_device *, struct ieee_ets *);
 	int (*ieee_getmaxrate) (struct net_device *, struct ieee_maxrate *);
 	int (*ieee_setmaxrate) (struct net_device *, struct ieee_maxrate *);
+	int (*ieee_getqcn) (struct net_device *, struct ieee_qcn *);
+	int (*ieee_setqcn) (struct net_device *, struct ieee_qcn *);
+	int (*ieee_getqcnstats) (struct net_device *, struct ieee_qcn_stats *);
 	int (*ieee_getpfc) (struct net_device *, struct ieee_pfc *);
 	int (*ieee_setpfc) (struct net_device *, struct ieee_pfc *);
 	int (*ieee_getapp) (struct net_device *, struct dcb_app *);
diff --git a/include/uapi/linux/dcbnl.h b/include/uapi/linux/dcbnl.h
index e711f20dc522..6497d7933d5b 100644
--- a/include/uapi/linux/dcbnl.h
+++ b/include/uapi/linux/dcbnl.h
@@ -78,6 +78,70 @@ struct ieee_maxrate {
 	__u64	tc_maxrate[IEEE_8021QAZ_MAX_TCS];
 };
 
+enum dcbnl_cndd_states {
+	DCB_CNDD_RESET = 0,
+	DCB_CNDD_EDGE,
+	DCB_CNDD_INTERIOR,
+	DCB_CNDD_INTERIOR_READY,
+};
+
+/* This structure contains the IEEE 802.1Qau QCN managed object.
+ *
+ *@rpg_enable: enable QCN RP
+ *@rppp_max_rps: maximum number of RPs allowed for this CNPV on this port
+ *@rpg_time_reset: time between rate increases if no CNMs received.
+ *		   given in u-seconds
+ *@rpg_byte_reset: transmitted data between rate increases if no CNMs received.
+ *		   given in Bytes
+ *@rpg_threshold: The number of times rpByteStage or rpTimeStage can count
+ *		   before RP rate control state machine advances states
+ *@rpg_max_rate: the maxinun rate, in Mbits per second,
+ *		 at which an RP can transmit
+ *@rpg_ai_rate: The rate, in Mbits per second,
+ *		used to increase rpTargetRate in the RPR_ACTIVE_INCREASE
+ *@rpg_hai_rate: The rate, in Mbits per second,
+ *		 used to increase rpTargetRate in the RPR_HYPER_INCREASE state
+ *@rpg_gd: Upon CNM receive, flow rate is limited to (Fb/Gd)*CurrentRate.
+ *	   rpgGd is given as log2(Gd), where Gd may only be powers of 2
+ *@rpg_min_dec_fac: The minimum factor by which the current transmit rate
+ *		    can be changed by reception of a CNM.
+ *		    value is given as percentage (1-100)
+ *@rpg_min_rate: The minimum value, in bits per second, for rate to limit
+ *@cndd_state_machine: The state of the congestion notification domain
+ *		       defense state machine, as defined by IEEE 802.3Qau
+ *		       section 32.1.1. In the interior ready state,
+ *		       the QCN capable hardware may add CN-TAG TLV to the
+ *		       outgoing traffic, to specifically identify outgoing
+ *		       flows.
+ */
+
+struct ieee_qcn {
+	__u8 rpg_enable[IEEE_8021QAZ_MAX_TCS];
+	__u32 rppp_max_rps[IEEE_8021QAZ_MAX_TCS];
+	__u32 rpg_time_reset[IEEE_8021QAZ_MAX_TCS];
+	__u32 rpg_byte_reset[IEEE_8021QAZ_MAX_TCS];
+	__u32 rpg_threshold[IEEE_8021QAZ_MAX_TCS];
+	__u32 rpg_max_rate[IEEE_8021QAZ_MAX_TCS];
+	__u32 rpg_ai_rate[IEEE_8021QAZ_MAX_TCS];
+	__u32 rpg_hai_rate[IEEE_8021QAZ_MAX_TCS];
+	__u32 rpg_gd[IEEE_8021QAZ_MAX_TCS];
+	__u32 rpg_min_dec_fac[IEEE_8021QAZ_MAX_TCS];
+	__u32 rpg_min_rate[IEEE_8021QAZ_MAX_TCS];
+	__u32 cndd_state_machine[IEEE_8021QAZ_MAX_TCS];
+};
+
+/* This structure contains the IEEE 802.1Qau QCN statistics.
+ *
+ *@rppp_rp_centiseconds: the number of RP-centiseconds accumulated
+ *			 by RPs at this priority level on this Port
+ *@rppp_created_rps: number of active RPs(flows) that react to CNMs
+ */
+
+struct ieee_qcn_stats {
+	__u64 rppp_rp_centiseconds[IEEE_8021QAZ_MAX_TCS];
+	__u32 rppp_created_rps[IEEE_8021QAZ_MAX_TCS];
+};
+
 /* This structure contains the IEEE 802.1Qaz PFC managed object
  *
  * @pfc_cap: Indicates the number of traffic classes on the local device
@@ -334,6 +398,8 @@ enum ieee_attrs {
 	DCB_ATTR_IEEE_PEER_PFC,
 	DCB_ATTR_IEEE_PEER_APP,
 	DCB_ATTR_IEEE_MAXRATE,
+	DCB_ATTR_IEEE_QCN,
+	DCB_ATTR_IEEE_QCN_STATS,
 	__DCB_ATTR_IEEE_MAX
 };
 #define DCB_ATTR_IEEE_MAX (__DCB_ATTR_IEEE_MAX - 1)