Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem

12 files changed, 177 insertions, 19 deletions

diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h
index ee332fab825b..1d002b58b60b 100644
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -27,7 +27,7 @@
 #define   BCMA_CC_FLASHT_NONE		0x00000000	/* No flash */
 #define   BCMA_CC_FLASHT_STSER		0x00000100	/* ST serial flash */
 #define   BCMA_CC_FLASHT_ATSER		0x00000200	/* Atmel serial flash */
-#define   BCMA_CC_FLASHT_NFLASH		0x00000200	/* NAND flash */
+#define   BCMA_CC_FLASHT_NAND		0x00000300	/* NAND flash */
 #define	  BCMA_CC_FLASHT_PARA		0x00000700	/* Parallel flash */
 #define  BCMA_CC_CAP_PLLT		0x00038000	/* PLL Type */
 #define   BCMA_PLLTYPE_NONE		0x00000000
diff --git a/include/linux/bcma/bcma_driver_mips.h b/include/linux/bcma/bcma_driver_mips.h
index 0d1ea297851a..fb61f3fb4ddb 100644
--- a/include/linux/bcma/bcma_driver_mips.h
+++ b/include/linux/bcma/bcma_driver_mips.h
@@ -42,13 +42,18 @@ struct bcma_drv_mips {
 #ifdef CONFIG_BCMA_DRIVER_MIPS
 extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
 extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore);
+
+extern unsigned int bcma_core_irq(struct bcma_device *core);
 #else
 static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { }
 static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { }
+
+static inline unsigned int bcma_core_irq(struct bcma_device *core)
+{
+	return 0;
+}
 #endif
 
 extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore);
 
-extern unsigned int bcma_core_irq(struct bcma_device *core);
-
 #endif /* LINUX_BCMA_DRIVER_MIPS_H_ */
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index ccf9ee1dca8c..11c8bc87fdcb 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -1898,7 +1898,10 @@ enum ieee80211_sa_query_action {
 /* AKM suite selectors */
 #define WLAN_AKM_SUITE_8021X		0x000FAC01
 #define WLAN_AKM_SUITE_PSK		0x000FAC02
-#define WLAN_AKM_SUITE_SAE			0x000FAC08
+#define WLAN_AKM_SUITE_8021X_SHA256	0x000FAC05
+#define WLAN_AKM_SUITE_PSK_SHA256	0x000FAC06
+#define WLAN_AKM_SUITE_TDLS		0x000FAC07
+#define WLAN_AKM_SUITE_SAE		0x000FAC08
 #define WLAN_AKM_SUITE_FT_OVER_SAE	0x000FAC09
 
 #define WLAN_MAX_KEY_LEN		32
diff --git a/include/linux/ssb/ssb_driver_mips.h b/include/linux/ssb/ssb_driver_mips.h
index 07a9c7a2e088..afe79d40a99e 100644
--- a/include/linux/ssb/ssb_driver_mips.h
+++ b/include/linux/ssb/ssb_driver_mips.h
@@ -45,6 +45,11 @@ void ssb_mipscore_init(struct ssb_mipscore *mcore)
 {
 }
 
+static inline unsigned int ssb_mips_irq(struct ssb_device *dev)
+{
+	return 0;
+}
+
 #endif /* CONFIG_SSB_DRIVER_MIPS */
 
 #endif /* LINUX_SSB_MIPSCORE_H_ */
diff --git a/include/net/bluetooth/a2mp.h b/include/net/bluetooth/a2mp.h
index 42f21766c538..487b54c1308f 100644
--- a/include/net/bluetooth/a2mp.h
+++ b/include/net/bluetooth/a2mp.h
@@ -23,6 +23,7 @@ enum amp_mgr_state {
 	READ_LOC_AMP_INFO,
 	READ_LOC_AMP_ASSOC,
 	READ_LOC_AMP_ASSOC_FINAL,
+	WRITE_REMOTE_AMP_ASSOC,
 };
 
 struct amp_mgr {
@@ -33,7 +34,7 @@ struct amp_mgr {
 	struct kref		kref;
 	__u8			ident;
 	__u8			handle;
-	enum amp_mgr_state	state;
+	unsigned long		state;
 	unsigned long		flags;
 
 	struct list_head	amp_ctrls;
@@ -144,5 +145,6 @@ void a2mp_discover_amp(struct l2cap_chan *chan);
 void a2mp_send_getinfo_rsp(struct hci_dev *hdev);
 void a2mp_send_getampassoc_rsp(struct hci_dev *hdev, u8 status);
 void a2mp_send_create_phy_link_req(struct hci_dev *hdev, u8 status);
+void a2mp_send_create_phy_link_rsp(struct hci_dev *hdev, u8 status);
 
 #endif /* __A2MP_H */
diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
index 2554b3f5222a..9531beee09b5 100644
--- a/include/net/bluetooth/bluetooth.h
+++ b/include/net/bluetooth/bluetooth.h
@@ -166,6 +166,29 @@ typedef struct {
 #define BDADDR_LE_PUBLIC	0x01
 #define BDADDR_LE_RANDOM	0x02
 
+static inline bool bdaddr_type_is_valid(__u8 type)
+{
+	switch (type) {
+	case BDADDR_BREDR:
+	case BDADDR_LE_PUBLIC:
+	case BDADDR_LE_RANDOM:
+		return true;
+	}
+
+	return false;
+}
+
+static inline bool bdaddr_type_is_le(__u8 type)
+{
+	switch (type) {
+	case BDADDR_LE_PUBLIC:
+	case BDADDR_LE_RANDOM:
+		return true;
+	}
+
+	return false;
+}
+
 #define BDADDR_ANY   (&(bdaddr_t) {{0, 0, 0, 0, 0, 0} })
 #define BDADDR_LOCAL (&(bdaddr_t) {{0, 0, 0, 0xff, 0xff, 0xff} })
 
diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index 45eee08157bb..7f12c25f1fca 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -943,6 +943,12 @@ struct hci_rp_le_read_buffer_size {
 	__u8     le_max_pkt;
 } __packed;
 
+#define HCI_OP_LE_READ_LOCAL_FEATURES	0x2003
+struct hci_rp_le_read_local_features {
+	__u8     status;
+	__u8     features[8];
+} __packed;
+
 #define HCI_OP_LE_READ_ADV_TX_POWER	0x2007
 struct hci_rp_le_read_adv_tx_power {
 	__u8	status;
@@ -995,6 +1001,12 @@ struct hci_cp_le_create_conn {
 
 #define HCI_OP_LE_CREATE_CONN_CANCEL	0x200e
 
+#define HCI_OP_LE_READ_WHITE_LIST_SIZE	0x200f
+struct hci_rp_le_read_white_list_size {
+	__u8	status;
+	__u8	size;
+} __packed;
+
 #define HCI_OP_LE_CONN_UPDATE		0x2013
 struct hci_cp_le_conn_update {
 	__le16   handle;
@@ -1033,6 +1045,12 @@ struct hci_rp_le_ltk_neg_reply {
 	__le16	handle;
 } __packed;
 
+#define HCI_OP_LE_READ_SUPPORTED_STATES	0x201c
+struct hci_rp_le_read_supported_states {
+	__u8	status;
+	__u8	le_states[8];
+} __packed;
+
 /* ---- HCI Events ---- */
 #define HCI_EV_INQUIRY_COMPLETE		0x01
 
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 014a2eaa5389..90cf75afcb02 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -86,6 +86,7 @@ struct bdaddr_list {
 struct bt_uuid {
 	struct list_head list;
 	u8 uuid[16];
+	u8 size;
 	u8 svc_hint;
 };
 
@@ -152,6 +153,9 @@ struct hci_dev {
 	__u8		minor_class;
 	__u8		features[8];
 	__u8		host_features[8];
+	__u8		le_features[8];
+	__u8		le_white_list_size;
+	__u8		le_states[8];
 	__u8		commands[64];
 	__u8		hci_ver;
 	__u16		hci_rev;
@@ -216,6 +220,7 @@ struct hci_dev {
 	unsigned long	le_last_tx;
 
 	struct workqueue_struct	*workqueue;
+	struct workqueue_struct	*req_workqueue;
 
 	struct work_struct	power_on;
 	struct delayed_work	power_off;
diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h
index 7588ef44ebaf..cdd33021f831 100644
--- a/include/net/bluetooth/l2cap.h
+++ b/include/net/bluetooth/l2cap.h
@@ -496,7 +496,6 @@ struct l2cap_chan {
 	__u16		frames_sent;
 	__u16		unacked_frames;
 	__u8		retry_count;
-	__u16		srej_queue_next;
 	__u16		sdu_len;
 	struct sk_buff	*sdu;
 	struct sk_buff	*sdu_last_frag;
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 1b9830ebe6c6..f9df20028bbd 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -527,6 +527,26 @@ struct cfg80211_beacon_data {
 	size_t probe_resp_len;
 };
 
+struct mac_address {
+	u8 addr[ETH_ALEN];
+};
+
+/**
+ * struct cfg80211_acl_data - Access control list data
+ *
+ * @acl_policy: ACL policy to be applied on the station's
+	entry specified by mac_addr
+ * @n_acl_entries: Number of MAC address entries passed
+ * @mac_addrs: List of MAC addresses of stations to be used for ACL
+ */
+struct cfg80211_acl_data {
+	enum nl80211_acl_policy acl_policy;
+	int n_acl_entries;
+
+	/* Keep it last */
+	struct mac_address mac_addrs[];
+};
+
 /**
  * struct cfg80211_ap_settings - AP configuration
  *
@@ -546,6 +566,8 @@ struct cfg80211_beacon_data {
  * @inactivity_timeout: time in seconds to determine station's inactivity.
  * @p2p_ctwindow: P2P CT Window
  * @p2p_opp_ps: P2P opportunistic PS
+ * @acl: ACL configuration used by the drivers which has support for
+ *	MAC address based access control
  */
 struct cfg80211_ap_settings {
 	struct cfg80211_chan_def chandef;
@@ -562,6 +584,7 @@ struct cfg80211_ap_settings {
 	int inactivity_timeout;
 	u8 p2p_ctwindow;
 	bool p2p_opp_ps;
+	const struct cfg80211_acl_data *acl;
 };
 
 /**
@@ -1796,6 +1819,13 @@ struct cfg80211_gtk_rekey_data {
  *
  * @start_p2p_device: Start the given P2P device.
  * @stop_p2p_device: Stop the given P2P device.
+ *
+ * @set_mac_acl: Sets MAC address control list in AP and P2P GO mode.
+ *	Parameters include ACL policy, an array of MAC address of stations
+ *	and the number of MAC addresses. If there is already a list in driver
+ *	this new list replaces the existing one. Driver has to clear its ACL
+ *	when number of MAC addresses entries is passed as 0. Drivers which
+ *	advertise the support for MAC based ACL have to implement this callback.
  */
 struct cfg80211_ops {
 	int	(*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
@@ -2016,6 +2046,9 @@ struct cfg80211_ops {
 				    struct wireless_dev *wdev);
 	void	(*stop_p2p_device)(struct wiphy *wiphy,
 				   struct wireless_dev *wdev);
+
+	int	(*set_mac_acl)(struct wiphy *wiphy, struct net_device *dev,
+			       const struct cfg80211_acl_data *params);
 };
 
 /*
@@ -2181,10 +2214,6 @@ struct ieee80211_iface_combination {
 	u8 radar_detect_widths;
 };
 
-struct mac_address {
-	u8 addr[ETH_ALEN];
-};
-
 struct ieee80211_txrx_stypes {
 	u16 tx, rx;
 };
@@ -2325,6 +2354,9 @@ struct wiphy_wowlan_support {
  * @ap_sme_capa: AP SME capabilities, flags from &enum nl80211_ap_sme_features.
  * @ht_capa_mod_mask:  Specify what ht_cap values can be over-ridden.
  *	If null, then none can be over-ridden.
+ *
+ * @max_acl_mac_addrs: Maximum number of MAC addresses that the device
+ *	supports for ACL.
  */
 struct wiphy {
 	/* assign these fields before you register the wiphy */
@@ -2346,6 +2378,8 @@ struct wiphy {
 	/* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */
 	u16 interface_modes;
 
+	u16 max_acl_mac_addrs;
+
 	u32 flags, features;
 
 	u32 ap_sme_capa;
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 3037f49e51c8..5c98d654fc75 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -297,11 +297,9 @@ enum ieee80211_rssi_event {
  *	may filter ARP queries targeted for other addresses than listed here.
  *	The driver must allow ARP queries targeted for all address listed here
  *	to pass through. An empty list implies no ARP queries need to pass.
- * @arp_addr_cnt: Number of addresses currently on the list.
- * @arp_filter_enabled: Enable ARP filtering - if enabled, the hardware may
- *	filter ARP queries based on the @arp_addr_list, if disabled, the
- *	hardware must not perform any ARP filtering. Note, that the filter will
- *	be enabled also in promiscuous mode.
+ * @arp_addr_cnt: Number of addresses currently on the list. Note that this
+ *	may be larger than %IEEE80211_BSS_ARP_ADDR_LIST_LEN (the arp_addr_list
+ *	array size), it's up to the driver what to do in that case.
  * @qos: This is a QoS-enabled BSS.
  * @idle: This interface is idle. There's also a global idle flag in the
  *	hardware config which may be more appropriate depending on what
@@ -338,8 +336,7 @@ struct ieee80211_bss_conf {
 	u32 cqm_rssi_hyst;
 	struct cfg80211_chan_def chandef;
 	__be32 arp_addr_list[IEEE80211_BSS_ARP_ADDR_LIST_LEN];
-	u8 arp_addr_cnt;
-	bool arp_filter_enabled;
+	int arp_addr_cnt;
 	bool qos;
 	bool idle;
 	bool ps;
@@ -1630,6 +1627,10 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb);
  * rekeying), it will not include a valid phase 1 key. The valid phase 1 key is
  * provided by update_tkip_key only. The trigger that makes mac80211 call this
  * handler is software decryption with wrap around of iv16.
+ *
+ * The set_default_unicast_key() call updates the default WEP key index
+ * configured to the hardware for WEP encryption type. This is required
+ * for devices that support offload of data packets (e.g. ARP responses).
  */
 
 /**
@@ -2208,6 +2209,10 @@ enum ieee80211_rate_control_changed {
  *	After rekeying was done it should (for example during resume) notify
  *	userspace of the new replay counter using ieee80211_gtk_rekey_notify().
  *
+ * @set_default_unicast_key: Set the default (unicast) key index, useful for
+ *	WEP when the device sends data packets autonomously, e.g. for ARP
+ *	offloading. The index can be 0-3, or -1 for unsetting it.
+ *
  * @hw_scan: Ask the hardware to service the scan request, no need to start
  *	the scan state machine in stack. The scan must honour the channel
  *	configuration done by the regulatory agent in the wiphy's
@@ -2492,6 +2497,9 @@ enum ieee80211_rate_control_changed {
  *	driver's resume function returned 1, as this is just like an "inline"
  *	hardware restart. This callback may sleep.
  *
+ * @ipv6_addr_change: IPv6 address assignment on the given interface changed.
+ *	Currently, this is only called for managed or P2P client interfaces.
+ *	This callback is optional; it must not sleep.
  */
 struct ieee80211_ops {
 	void (*tx)(struct ieee80211_hw *hw,
@@ -2539,6 +2547,8 @@ struct ieee80211_ops {
 	void (*set_rekey_data)(struct ieee80211_hw *hw,
 			       struct ieee80211_vif *vif,
 			       struct cfg80211_gtk_rekey_data *data);
+	void (*set_default_unicast_key)(struct ieee80211_hw *hw,
+					struct ieee80211_vif *vif, int idx);
 	int (*hw_scan)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 		       struct cfg80211_scan_request *req);
 	void (*cancel_hw_scan)(struct ieee80211_hw *hw,
@@ -2623,6 +2633,7 @@ struct ieee80211_ops {
 	int (*set_bitrate_mask)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 				const struct cfg80211_bitrate_mask *mask);
 	void (*rssi_callback)(struct ieee80211_hw *hw,
+			      struct ieee80211_vif *vif,
 			      enum ieee80211_rssi_event rssi_event);
 
 	void (*allow_buffered_frames)(struct ieee80211_hw *hw,
@@ -2665,6 +2676,12 @@ struct ieee80211_ops {
 				     struct ieee80211_chanctx_conf *ctx);
 
 	void (*restart_complete)(struct ieee80211_hw *hw);
+
+#if IS_ENABLED(CONFIG_IPV6)
+	void (*ipv6_addr_change)(struct ieee80211_hw *hw,
+				 struct ieee80211_vif *vif,
+				 struct inet6_dev *idev);
+#endif
 };
 
 /**
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index e6eeb4ba5dc5..5b7dbc1ea966 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -170,7 +170,8 @@
  *	%NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE,
  *	%NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS,
  *	%NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY,
- *	%NL80211_ATTR_AUTH_TYPE and %NL80211_ATTR_INACTIVITY_TIMEOUT.
+ *	%NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT,
+ *	%NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS.
  *	The channel to use can be set on the interface or be given using the
  *	%NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width.
  * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP
@@ -586,6 +587,16 @@
  * @NL80211_CMD_SET_MCAST_RATE: Change the rate used to send multicast frames
  *	for IBSS or MESH vif.
  *
+ * @NL80211_CMD_SET_MAC_ACL: sets ACL for MAC address based access control.
+ *	This is to be used with the drivers advertising the support of MAC
+ *	address based access control. List of MAC addresses is passed in
+ *	%NL80211_ATTR_MAC_ADDRS and ACL policy is passed in
+ *	%NL80211_ATTR_ACL_POLICY. Driver will enable ACL with this list, if it
+ *	is not already done. The new list will replace any existing list. Driver
+ *	will clear its ACL when the list of MAC addresses passed is empty. This
+ *	command is used in AP/P2P GO mode. Driver has to make sure to clear its
+ *	ACL list during %NL80211_CMD_STOP_AP.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -736,6 +747,8 @@ enum nl80211_commands {
 
 	NL80211_CMD_SET_MCAST_RATE,
 
+	NL80211_CMD_SET_MAC_ACL,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -1313,6 +1326,16 @@ enum nl80211_commands {
  * @NL80211_ATTR_LOCAL_MESH_POWER_MODE: local mesh STA link-specific power mode
  *	defined in &enum nl80211_mesh_power_mode.
  *
+ * @NL80211_ATTR_ACL_POLICY: ACL policy, see &enum nl80211_acl_policy,
+ *	carried in a u32 attribute
+ *
+ * @NL80211_ATTR_MAC_ADDRS: Array of nested MAC addresses, used for
+ *	MAC ACL.
+ *
+ * @NL80211_ATTR_MAC_ACL_MAX: u32 attribute to advertise the maximum
+ *	number of MAC addresses that a device can support for MAC
+ *	ACL.
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -1585,6 +1608,12 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_LOCAL_MESH_POWER_MODE,
 
+	NL80211_ATTR_ACL_POLICY,
+
+	NL80211_ATTR_MAC_ADDRS,
+
+	NL80211_ATTR_MAC_ACL_MAX,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -3248,7 +3277,7 @@ enum nl80211_probe_resp_offload_support_attr {
  * enum nl80211_connect_failed_reason - connection request failed reasons
  * @NL80211_CONN_FAIL_MAX_CLIENTS: Maximum number of clients that can be
  *	handled by the AP is reached.
- * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Client's MAC is in the AP's blocklist.
+ * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Connection request is rejected due to ACL.
  */
 enum nl80211_connect_failed_reason {
 	NL80211_CONN_FAIL_MAX_CLIENTS,
@@ -3276,4 +3305,22 @@ enum nl80211_scan_flags {
 	NL80211_SCAN_FLAG_AP				= 1<<2,
 };
 
+/**
+ * enum nl80211_acl_policy - access control policy
+ *
+ * Access control policy is applied on a MAC list set by
+ * %NL80211_CMD_START_AP and %NL80211_CMD_SET_MAC_ACL, to
+ * be used with %NL80211_ATTR_ACL_POLICY.
+ *
+ * @NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED: Deny stations which are
+ *	listed in ACL, i.e. allow all the stations which are not listed
+ *	in ACL to authenticate.
+ * @NL80211_ACL_POLICY_DENY_UNLESS_LISTED: Allow the stations which are listed
+ *	in ACL, i.e. deny all the stations which are not listed in ACL.
+ */
+enum nl80211_acl_policy {
+	NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED,
+	NL80211_ACL_POLICY_DENY_UNLESS_LISTED,
+};
+
 #endif /* __LINUX_NL80211_H */