Merge tag 'linux-can-next-for-6.18-20250924' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2025-09-25

this is a pull request of 48 patches for net-next/main, which
supersedes tags/linux-can-next-for-6.18-20250923.

The 1st patch is by Xichao Zhao and converts ns_to_ktime() to
us_to_ktime() in the m_can driver.

Vincent Mailhol contributes 2 patches: Updating the MAINTAINERS and
mailmap files to Vincent's new email address and sorting the includes
in the CAN helper library alphabeticaly.

Stéphane Grosjean's patch modifies all peak CAN drivers and the
mailmap to reflect Stéphane's new email address.

4 patches by Biju Das update the CAN-FD handling in the rcar_canfd
driver.

Followed by 11 patches by Geert Uytterhoeven updating and improving
the rcar_can driver.

Stefan Mätje contributes 2 patches for the esd_usb driver updating the
error messages.

The next 3 patch series are all by Vincent Mailhol: 3 patches to
optimize the size of struct raw_sock and struct uniqframe. 4 patches
which rework the CAN MTU logic as preparation for CAN-XL interfaces.
And finally 20 patches that prepare and refactor the CAN netlink code
for the upcoming CAN-XL support.

* tag 'linux-can-next-for-6.18-20250924' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (48 commits)
  can: netlink: add userland error messages
  can: dev: add can_get_ctrlmode_str()
  can: calc_bittiming: make can_calc_tdco() FD agnostic
  can: netlink: make can_tdc_fill_info() FD agnostic
  can: netlink: add can_bitrate_const_fill_info()
  can: netlink: add can_bittiming_const_fill_info()
  can: netlink: add can_bittiming_fill_info()
  can: netlink: add can_data_bittiming_get_size()
  can: netlink: make can_tdc_get_size() FD agnostic
  can: netlink: add can_ctrlmode_changelink()
  can: netlink: add can_dtb_changelink()
  can: netlink: make can_tdc_changelink() FD agnostic
  can: netlink: remove useless check in can_tdc_changelink()
  can: netlink: refactor CAN_CTRLMODE_TDC_{AUTO,MANUAL} flag reset logic
  can: netlink: add can_validate_databittiming()
  can: netlink: add can_validate_tdc()
  can: netlink: refactor can_validate_bittiming()
  can: netlink: document which symbols are FD specific
  can: dev: make can_get_relative_tdco() FD agnostic and move it to bittiming.h
  can: dev: move struct data_bittiming_params to linux/can/bittiming.h
  ...
====================

Link: https://patch.msgid.link/20250925121332.848157-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

4 files changed, 60 insertions, 72 deletions

diff --git a/include/linux/can/bittiming.h b/include/linux/can/bittiming.h
index 5dfdbb63b1d5..d30816dd93c7 100644
--- a/include/linux/can/bittiming.h
+++ b/include/linux/can/bittiming.h
@@ -16,6 +16,10 @@
 
 #define CAN_CTRLMODE_FD_TDC_MASK				\
 	(CAN_CTRLMODE_TDC_AUTO | CAN_CTRLMODE_TDC_MANUAL)
+#define CAN_CTRLMODE_TDC_AUTO_MASK				\
+	(CAN_CTRLMODE_TDC_AUTO)
+#define CAN_CTRLMODE_TDC_MANUAL_MASK				\
+	(CAN_CTRLMODE_TDC_MANUAL)
 
 /*
  * struct can_tdc - CAN FD Transmission Delay Compensation parameters
@@ -114,13 +118,24 @@ struct can_tdc_const {
 	u32 tdcf_max;
 };
 
+struct data_bittiming_params {
+	const struct can_bittiming_const *data_bittiming_const;
+	struct can_bittiming data_bittiming;
+	const struct can_tdc_const *tdc_const;
+	struct can_tdc tdc;
+	const u32 *data_bitrate_const;
+	unsigned int data_bitrate_const_cnt;
+	int (*do_set_data_bittiming)(struct net_device *dev);
+	int (*do_get_auto_tdcv)(const struct net_device *dev, u32 *tdcv);
+};
+
 #ifdef CONFIG_CAN_CALC_BITTIMING
 int can_calc_bittiming(const struct net_device *dev, struct can_bittiming *bt,
 		       const struct can_bittiming_const *btc, struct netlink_ext_ack *extack);
 
 void can_calc_tdco(struct can_tdc *tdc, const struct can_tdc_const *tdc_const,
 		   const struct can_bittiming *dbt,
-		   u32 *ctrlmode, u32 ctrlmode_supported);
+		   u32 tdc_mask, u32 *ctrlmode, u32 ctrlmode_supported);
 #else /* !CONFIG_CAN_CALC_BITTIMING */
 static inline int
 can_calc_bittiming(const struct net_device *dev, struct can_bittiming *bt,
@@ -133,7 +148,7 @@ can_calc_bittiming(const struct net_device *dev, struct can_bittiming *bt,
 static inline void
 can_calc_tdco(struct can_tdc *tdc, const struct can_tdc_const *tdc_const,
 	      const struct can_bittiming *dbt,
-	      u32 *ctrlmode, u32 ctrlmode_supported)
+	      u32 tdc_mask, u32 *ctrlmode, u32 ctrlmode_supported)
 {
 }
 #endif /* CONFIG_CAN_CALC_BITTIMING */
@@ -150,6 +165,35 @@ int can_get_bittiming(const struct net_device *dev, struct can_bittiming *bt,
 		      struct netlink_ext_ack *extack);
 
 /*
+ * can_get_relative_tdco() - TDCO relative to the sample point
+ *
+ * struct can_tdc::tdco represents the absolute offset from TDCV. Some
+ * controllers use instead an offset relative to the Sample Point (SP)
+ * such that:
+ *
+ * SSP = TDCV + absolute TDCO
+ *     = TDCV + SP + relative TDCO
+ *
+ * -+----------- one bit ----------+-- TX pin
+ *  |<--- Sample Point --->|
+ *
+ *                         --+----------- one bit ----------+-- RX pin
+ *  |<-------- TDCV -------->|
+ *                           |<------------------------>| absolute TDCO
+ *                           |<--- Sample Point --->|
+ *                           |                      |<->| relative TDCO
+ *  |<------------- Secondary Sample Point ------------>|
+ */
+static inline s32 can_get_relative_tdco(const struct data_bittiming_params *dbt_params)
+{
+	const struct can_bittiming *dbt = &dbt_params->data_bittiming;
+	s32 sample_point_in_tc = (CAN_SYNC_SEG + dbt->prop_seg +
+				  dbt->phase_seg1) * dbt->brp;
+
+	return (s32)dbt_params->tdc.tdco - sample_point_in_tc;
+}
+
+/*
  * can_bit_time() - Duration of one bit
  *
  * Please refer to ISO 11898-1:2015, section 11.3.1.1 "Bit time" for
diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h
index 9a92cbe5b2cb..a2229a61ccde 100644
--- a/include/linux/can/dev.h
+++ b/include/linux/can/dev.h
@@ -38,17 +38,6 @@ enum can_termination_gpio {
 	CAN_TERMINATION_GPIO_MAX,
 };
 
-struct data_bittiming_params {
-	const struct can_bittiming_const *data_bittiming_const;
-	struct can_bittiming data_bittiming;
-	const struct can_tdc_const *tdc_const;
-	struct can_tdc tdc;
-	const u32 *data_bitrate_const;
-	unsigned int data_bitrate_const_cnt;
-	int (*do_set_data_bittiming)(struct net_device *dev);
-	int (*do_get_auto_tdcv)(const struct net_device *dev, u32 *tdcv);
-};
-
 /*
  * CAN common private data
  */
@@ -96,56 +85,6 @@ static inline bool can_fd_tdc_is_enabled(const struct can_priv *priv)
 	return !!(priv->ctrlmode & CAN_CTRLMODE_FD_TDC_MASK);
 }
 
-/*
- * can_get_relative_tdco() - TDCO relative to the sample point
- *
- * struct can_tdc::tdco represents the absolute offset from TDCV. Some
- * controllers use instead an offset relative to the Sample Point (SP)
- * such that:
- *
- * SSP = TDCV + absolute TDCO
- *     = TDCV + SP + relative TDCO
- *
- * -+----------- one bit ----------+-- TX pin
- *  |<--- Sample Point --->|
- *
- *                         --+----------- one bit ----------+-- RX pin
- *  |<-------- TDCV -------->|
- *                           |<------------------------>| absolute TDCO
- *                           |<--- Sample Point --->|
- *                           |                      |<->| relative TDCO
- *  |<------------- Secondary Sample Point ------------>|
- */
-static inline s32 can_get_relative_tdco(const struct can_priv *priv)
-{
-	const struct can_bittiming *dbt = &priv->fd.data_bittiming;
-	s32 sample_point_in_tc = (CAN_SYNC_SEG + dbt->prop_seg +
-				  dbt->phase_seg1) * dbt->brp;
-
-	return (s32)priv->fd.tdc.tdco - sample_point_in_tc;
-}
-
-/* helper to define static CAN controller features at device creation time */
-static inline int __must_check can_set_static_ctrlmode(struct net_device *dev,
-						       u32 static_mode)
-{
-	struct can_priv *priv = netdev_priv(dev);
-
-	/* alloc_candev() succeeded => netdev_priv() is valid at this point */
-	if (priv->ctrlmode_supported & static_mode) {
-		netdev_warn(dev,
-			    "Controller features can not be supported and static at the same time\n");
-		return -EINVAL;
-	}
-	priv->ctrlmode = static_mode;
-
-	/* override MTU which was set by default in can_setup()? */
-	if (static_mode & CAN_CTRLMODE_FD)
-		dev->mtu = CANFD_MTU;
-
-	return 0;
-}
-
 static inline u32 can_get_static_ctrlmode(struct can_priv *priv)
 {
 	return priv->ctrlmode & ~priv->ctrlmode_supported;
@@ -187,7 +126,10 @@ struct can_priv *safe_candev_priv(struct net_device *dev);
 
 int open_candev(struct net_device *dev);
 void close_candev(struct net_device *dev);
+void can_set_default_mtu(struct net_device *dev);
 int can_change_mtu(struct net_device *dev, int new_mtu);
+int __must_check can_set_static_ctrlmode(struct net_device *dev,
+					 u32 static_mode);
 int can_eth_ioctl_hwts(struct net_device *netdev, struct ifreq *ifr, int cmd);
 int can_ethtool_op_get_ts_info_hwts(struct net_device *dev,
 				    struct kernel_ethtool_ts_info *info);
@@ -199,6 +141,8 @@ int can_restart_now(struct net_device *dev);
 void can_bus_off(struct net_device *dev);
 
 const char *can_get_state_str(const enum can_state state);
+const char *can_get_ctrlmode_str(u32 ctrlmode);
+
 void can_state_get_by_berr_counter(const struct net_device *dev,
 				   const struct can_berr_counter *bec,
 				   enum can_state *tx_state,
diff --git a/include/linux/can/dev/peak_canfd.h b/include/linux/can/dev/peak_canfd.h
index f38772fd0c07..d3788a3d0942 100644
--- a/include/linux/can/dev/peak_canfd.h
+++ b/include/linux/can/dev/peak_canfd.h
@@ -2,8 +2,8 @@
 /*
  * CAN driver for PEAK System micro-CAN based adapters
  *
- * Copyright (C) 2003-2011 PEAK System-Technik GmbH
- * Copyright (C) 2011-2013 Stephane Grosjean <s.grosjean@peak-system.com>
+ * Copyright (C) 2003-2025 PEAK System-Technik GmbH
+ * Author: Stéphane Grosjean <stephane.grosjean@hms-networks.com>
  */
 #ifndef PUCAN_H
 #define PUCAN_H
diff --git a/include/uapi/linux/can/netlink.h b/include/uapi/linux/can/netlink.h
index 02ec32d69474..ef62f56eaaef 100644
--- a/include/uapi/linux/can/netlink.h
+++ b/include/uapi/linux/can/netlink.h
@@ -101,8 +101,8 @@ struct can_ctrlmode {
 #define CAN_CTRLMODE_PRESUME_ACK	0x40	/* Ignore missing CAN ACKs */
 #define CAN_CTRLMODE_FD_NON_ISO		0x80	/* CAN FD in non-ISO mode */
 #define CAN_CTRLMODE_CC_LEN8_DLC	0x100	/* Classic CAN DLC option */
-#define CAN_CTRLMODE_TDC_AUTO		0x200	/* CAN transiver automatically calculates TDCV */
-#define CAN_CTRLMODE_TDC_MANUAL		0x400	/* TDCV is manually set up by user */
+#define CAN_CTRLMODE_TDC_AUTO		0x200	/* FD transceiver automatically calculates TDCV */
+#define CAN_CTRLMODE_TDC_MANUAL		0x400	/* FD TDCV is manually set up by user */
 
 /*
  * CAN device statistics
@@ -129,14 +129,14 @@ enum {
 	IFLA_CAN_RESTART_MS,
 	IFLA_CAN_RESTART,
 	IFLA_CAN_BERR_COUNTER,
-	IFLA_CAN_DATA_BITTIMING,
-	IFLA_CAN_DATA_BITTIMING_CONST,
+	IFLA_CAN_DATA_BITTIMING, /* FD */
+	IFLA_CAN_DATA_BITTIMING_CONST, /* FD */
 	IFLA_CAN_TERMINATION,
 	IFLA_CAN_TERMINATION_CONST,
 	IFLA_CAN_BITRATE_CONST,
-	IFLA_CAN_DATA_BITRATE_CONST,
+	IFLA_CAN_DATA_BITRATE_CONST, /* FD */
 	IFLA_CAN_BITRATE_MAX,
-	IFLA_CAN_TDC,
+	IFLA_CAN_TDC, /* FD */
 	IFLA_CAN_CTRLMODE_EXT,
 
 	/* add new constants above here */
@@ -145,7 +145,7 @@ enum {
 };
 
 /*
- * CAN FD Transmitter Delay Compensation (TDC)
+ * CAN FD/XL Transmitter Delay Compensation (TDC)
  *
  * Please refer to struct can_tdc_const and can_tdc in
  * include/linux/can/bittiming.h for further details.