Merge tag 'qcom-drivers-for-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers

Qualcomm driver updates for v7.1

Add ECS LIVA QC710, Glymur CRD, Mahua CRD, Purwa IoT EVK, and Asus
Vivobook to the QSEECOM allow-list, to enable UEFI variable access
through uefisecapp.

Register the Gunyah watchdog device if the SCM driver finds itself
running under Gunyah. Clean up some locking using guards.

Handle possible cases where AOSS cooling state is given a non-boolean
state.

Replace LLCC per-slice activation bitmap with reference counting. Also
add SDM670 support.

Improve probe deferral handling in the OCMEM driver.

Add Milos, QCS615, Eliza, Glymur, and Mahua support to the pd-mapper.

Add support for SoCCP-based pmic-glink, as found in Glymur and
Kaanapali.

Add common QMI service ids to the main qmi headerfile, to avoid
spreading these constants in various drivers.

Add support for version 2 of SMP2P and implement the irqchip state
reading support.

Add CQ7790, SA8650P, SM7450, SM7450P, and IPQ5210 SoC and the PM7550BA
PMIC identifiers to the socinfo driver.

Add Eliza and Mahua support to the UBWC driver, introduce helpers for
drivers to read out min_acc length and other programmable values, and
disable bank swizzling for Glymur.

Simplify the logic related to allocation of NV download request in the
WCNSS control driver.

* tag 'qcom-drivers-for-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (51 commits)
  soc: qcom: ubwc: add helpers to get programmable values
  soc: qcom: ubwc: add helper to get min_acc length
  firmware: qcom: scm: Register gunyah watchdog device
  soc: qcom: socinfo: Add SoC ID for SA8650P
  dt-bindings: arm: qcom,ids: Add SoC ID for SA8650P
  firmware: qcom: scm: Allow QSEECOM on Mahua CRD
  soc: qcom: wcnss: simplify allocation of req
  soc: qcom: pd-mapper: Add support for Eliza
  soc: qcom: aoss: compare against normalized cooling state
  soc: qcom: llcc: fix v1 SB syndrome register offset
  dt-bindings: firmware: qcom,scm: Document ipq9650 SCM
  soc: qcom: ubwc: Add support for Mahua
  soc: qcom: pd-mapper: Add support for Glymur and Mahua
  soc: qcom: ubwc: Add configuration Eliza SoC
  soc: qcom: ubwc: Remove redundant x1e80100_data
  dt-bindings: firmware: qcom,scm: document Eliza SCM Firmware Interface
  soc: qcom: ocmem: return -EPROBE_DEFER is ocmem is not available
  soc: qcom: ocmem: register reasons for probe deferrals
  soc: qcom: ocmem: make the core clock optional
  soc: qcom: ubwc: disable bank swizzling for Glymur platform
  ...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

4 files changed, 51 insertions, 4 deletions

diff --git a/include/dt-bindings/arm/qcom,ids.h b/include/dt-bindings/arm/qcom,ids.h
index 8776844e0eeb..336f7bb7188a 100644
--- a/include/dt-bindings/arm/qcom,ids.h
+++ b/include/dt-bindings/arm/qcom,ids.h
@@ -245,6 +245,7 @@
 #define QCOM_ID_IPQ5000			503
 #define QCOM_ID_IPQ0509			504
 #define QCOM_ID_IPQ0518			505
+#define QCOM_ID_SM7450			506
 #define QCOM_ID_SM6375			507
 #define QCOM_ID_IPQ9514			510
 #define QCOM_ID_IPQ9550			511
@@ -260,10 +261,12 @@
 #define QCOM_ID_SM8475			530
 #define QCOM_ID_SM8475P			531
 #define QCOM_ID_SA8255P			532
+#define QCOM_ID_SA8650P			533
 #define QCOM_ID_SA8775P			534
 #define QCOM_ID_QRU1000			539
 #define QCOM_ID_SM8475_2		540
 #define QCOM_ID_QDU1000			545
+#define QCOM_ID_SM7450P			547
 #define QCOM_ID_X1E80100		555
 #define QCOM_ID_SM8650			557
 #define QCOM_ID_SM4450			568
@@ -294,6 +297,13 @@
 #define QCOM_ID_QCS8275			675
 #define QCOM_ID_QCS9075			676
 #define QCOM_ID_QCS615			680
+#define QCOM_ID_CQ7790M			731
+#define QCOM_ID_CQ7790S			732
+#define QCOM_ID_IPQ5200			765
+#define QCOM_ID_IPQ5210			766
+#define QCOM_ID_QCF2200			767
+#define QCOM_ID_QCF3200			768
+#define QCOM_ID_QCF3210			769
 
 /*
  * The board type and revision information, used by Qualcomm bootloaders and
diff --git a/include/linux/soc/qcom/llcc-qcom.h b/include/linux/soc/qcom/llcc-qcom.h
index 8243ab3a12a8..227125d84318 100644
--- a/include/linux/soc/qcom/llcc-qcom.h
+++ b/include/linux/soc/qcom/llcc-qcom.h
@@ -91,10 +91,12 @@
  * struct llcc_slice_desc - Cache slice descriptor
  * @slice_id: llcc slice id
  * @slice_size: Size allocated for the llcc slice
+ * @refcount: Atomic counter to track activate/deactivate calls
  */
 struct llcc_slice_desc {
 	u32 slice_id;
 	size_t slice_size;
+	refcount_t refcount;
 };
 
 /**
@@ -152,11 +154,10 @@ struct llcc_edac_reg_offset {
  * @edac_reg_offset: Offset of the LLCC EDAC registers
  * @lock: mutex associated with each slice
  * @cfg_size: size of the config data table
- * @max_slices: max slices as read from device tree
  * @num_banks: Number of llcc banks
- * @bitmap: Bit map to track the active slice ids
  * @ecc_irq: interrupt for llcc cache error detection and reporting
  * @ecc_irq_configured: 'True' if firmware has already configured the irq propagation
+ * @desc: Array pointer of pre-allocated LLCC slice descriptors
  * @version: Indicates the LLCC version
  */
 struct llcc_drv_data {
@@ -167,12 +168,11 @@ struct llcc_drv_data {
 	const struct llcc_edac_reg_offset *edac_reg_offset;
 	struct mutex lock;
 	u32 cfg_size;
-	u32 max_slices;
 	u32 num_banks;
-	unsigned long *bitmap;
 	int ecc_irq;
 	bool ecc_irq_configured;
 	u32 version;
+	struct llcc_slice_desc *desc;
 };
 
 #if IS_ENABLED(CONFIG_QCOM_LLCC)
diff --git a/include/linux/soc/qcom/qmi.h b/include/linux/soc/qcom/qmi.h
index 291cdc7ef49c..b9dcb437a0be 100644
--- a/include/linux/soc/qcom/qmi.h
+++ b/include/linux/soc/qcom/qmi.h
@@ -92,6 +92,18 @@ struct qmi_elem_info {
 #define QMI_ERR_INCOMPATIBLE_STATE_V01		90
 #define QMI_ERR_NOT_SUPPORTED_V01		94
 
+/*
+ * Enumerate the IDs of the QMI services
+ */
+#define QMI_SERVICE_ID_TEST		0x0f	/*   15 */
+#define QMI_SERVICE_ID_SSCTL		0x2b	/*   43 */
+#define QMI_SERVICE_ID_IPA		0x31	/*   49 */
+#define QMI_SERVICE_ID_SERVREG_LOC	0x40	/*   64 */
+#define QMI_SERVICE_ID_SERVREG_NOTIF	0x42	/*   66 */
+#define QMI_SERVICE_ID_WLFW		0x45	/*   69 */
+#define QMI_SERVICE_ID_SLIMBUS		0x301	/*  769 */
+#define QMI_SERVICE_ID_USB_AUDIO_STREAM 0x41d	/* 1053 */
+
 /**
  * struct qmi_response_type_v01 - common response header (decoded)
  * @result:	result of the transaction
diff --git a/include/linux/soc/qcom/ubwc.h b/include/linux/soc/qcom/ubwc.h
index f052e241736c..f5d0e2341261 100644
--- a/include/linux/soc/qcom/ubwc.h
+++ b/include/linux/soc/qcom/ubwc.h
@@ -74,4 +74,29 @@ static inline bool qcom_ubwc_get_ubwc_mode(const struct qcom_ubwc_cfg_data *cfg)
 	return ret;
 }
 
+/*
+ * This is the best guess, based on the MDSS driver, which worked so far.
+ */
+static inline bool qcom_ubwc_min_acc_length_64b(const struct qcom_ubwc_cfg_data *cfg)
+{
+	return cfg->ubwc_enc_version == UBWC_1_0 &&
+		(cfg->ubwc_dec_version == UBWC_2_0 ||
+		 cfg->ubwc_dec_version == UBWC_3_0);
+}
+
+static inline bool qcom_ubwc_macrotile_mode(const struct qcom_ubwc_cfg_data *cfg)
+{
+	return cfg->macrotile_mode;
+}
+
+static inline bool qcom_ubwc_bank_spread(const struct qcom_ubwc_cfg_data *cfg)
+{
+	return cfg->ubwc_bank_spread;
+}
+
+static inline u32 qcom_ubwc_swizzle(const struct qcom_ubwc_cfg_data *cfg)
+{
+	return cfg->ubwc_swizzle;
+}
+
 #endif /* __QCOM_UBWC_H__ */