Merge tag 'mac80211-next-for-davem-2019-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
New features for the wifi stack:
 * airtime fairness scheduling in mac80211, so we can share
 * more authentication offloads to userspace - this is for
   SAE which is part of WPA3 and is hard to do in firmware
 * documentation fixes
 * various mesh improvements
 * various other small improvements/cleanups

This also contains the NLA_POLICY_NESTED{,_ARRAY} change we
discussed, which affects everyone but there's no other user
yet.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

4 files changed, 268 insertions, 22 deletions

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index e0c41eb1c860..7f2739a90bdb 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -836,6 +836,17 @@ struct cfg80211_bitrate_mask {
 };
 
 /**
+ * enum cfg80211_ap_settings_flags - AP settings flags
+ *
+ * Used by cfg80211_ap_settings
+ *
+ * @AP_SETTINGS_EXTERNAL_AUTH_SUPPORT: AP supports external authentication
+ */
+enum cfg80211_ap_settings_flags {
+	AP_SETTINGS_EXTERNAL_AUTH_SUPPORT = BIT(0),
+};
+
+/**
  * struct cfg80211_ap_settings - AP configuration
  *
  * Used to configure an AP interface.
@@ -865,6 +876,7 @@ struct cfg80211_bitrate_mask {
  * @he_cap: HE capabilities (or %NULL if HE isn't enabled)
  * @ht_required: stations must support HT
  * @vht_required: stations must support VHT
+ * @flags: flags, as defined in enum cfg80211_ap_settings_flags
  */
 struct cfg80211_ap_settings {
 	struct cfg80211_chan_def chandef;
@@ -890,6 +902,7 @@ struct cfg80211_ap_settings {
 	const struct ieee80211_vht_cap *vht_cap;
 	const struct ieee80211_he_cap_elem *he_cap;
 	bool ht_required, vht_required;
+	u32 flags;
 };
 
 /**
@@ -1003,6 +1016,7 @@ enum station_parameters_apply_mask {
  * @support_p2p_ps: information if station supports P2P PS mechanism
  * @he_capa: HE capabilities of station
  * @he_capa_len: the length of the HE capabilities
+ * @airtime_weight: airtime scheduler weight for this station
  */
 struct station_parameters {
 	const u8 *supported_rates;
@@ -1032,6 +1046,7 @@ struct station_parameters {
 	int support_p2p_ps;
 	const struct ieee80211_he_cap_elem *he_capa;
 	u8 he_capa_len;
+	u16 airtime_weight;
 };
 
 /**
@@ -1300,6 +1315,8 @@ struct cfg80211_tid_stats {
  *	from this peer
  * @connected_to_gate: true if mesh STA has a path to mesh gate
  * @rx_duration: aggregate PPDU duration(usecs) for all the frames from a peer
+ * @tx_duration: aggregate PPDU duration(usecs) for all the frames to a peer
+ * @airtime_weight: current airtime scheduling weight
  * @pertid: per-TID statistics, see &struct cfg80211_tid_stats, using the last
  *	(IEEE80211_NUM_TIDS) index for MSDUs not encapsulated in QoS-MPDUs.
  *	Note that this doesn't use the @filled bit, but is used if non-NULL.
@@ -1350,8 +1367,9 @@ struct station_info {
 
 	u32 expected_throughput;
 
-	u64 rx_beacon;
+	u64 tx_duration;
 	u64 rx_duration;
+	u64 rx_beacon;
 	u8 rx_beacon_signal_avg;
 	u8 connected_to_gate;
 
@@ -1359,6 +1377,8 @@ struct station_info {
 	s8 ack_signal;
 	s8 avg_ack_signal;
 
+	u16 airtime_weight;
+
 	u32 rx_mpdu_count;
 	u32 fcs_err_count;
 };
@@ -1422,6 +1442,8 @@ enum monitor_flags {
  * @MPATH_INFO_DISCOVERY_TIMEOUT: @discovery_timeout filled
  * @MPATH_INFO_DISCOVERY_RETRIES: @discovery_retries filled
  * @MPATH_INFO_FLAGS: @flags filled
+ * @MPATH_INFO_HOP_COUNT: @hop_count filled
+ * @MPATH_INFO_PATH_CHANGE: @path_change_count filled
  */
 enum mpath_info_flags {
 	MPATH_INFO_FRAME_QLEN		= BIT(0),
@@ -1431,6 +1453,8 @@ enum mpath_info_flags {
 	MPATH_INFO_DISCOVERY_TIMEOUT	= BIT(4),
 	MPATH_INFO_DISCOVERY_RETRIES	= BIT(5),
 	MPATH_INFO_FLAGS		= BIT(6),
+	MPATH_INFO_HOP_COUNT		= BIT(7),
+	MPATH_INFO_PATH_CHANGE		= BIT(8),
 };
 
 /**
@@ -1450,6 +1474,8 @@ enum mpath_info_flags {
  *	This number should increase every time the list of mesh paths
  *	changes, i.e. when a station is added or removed, so that
  *	userspace can tell whether it got a consistent snapshot.
+ * @hop_count: hops to destination
+ * @path_change_count: total number of path changes to destination
  */
 struct mpath_info {
 	u32 filled;
@@ -1460,6 +1486,8 @@ struct mpath_info {
 	u32 discovery_timeout;
 	u8 discovery_retries;
 	u8 flags;
+	u8 hop_count;
+	u32 path_change_count;
 
 	int generation;
 };
@@ -2391,6 +2419,8 @@ enum wiphy_params_flags {
 	WIPHY_PARAM_TXQ_QUANTUM		= 1 << 8,
 };
 
+#define IEEE80211_DEFAULT_AIRTIME_WEIGHT	256
+
 /**
  * struct cfg80211_pmksa - PMK Security Association
  *
@@ -2815,6 +2845,7 @@ struct cfg80211_pmk_conf {
  *	use %WLAN_STATUS_UNSPECIFIED_FAILURE if user space cannot give you
  *	the real status code for failures. Used only for the authentication
  *	response command interface (user space to driver).
+ * @pmkid: The identifier to refer a PMKSA.
  */
 struct cfg80211_external_auth_params {
 	enum nl80211_external_auth_action action;
@@ -2822,6 +2853,7 @@ struct cfg80211_external_auth_params {
 	struct cfg80211_ssid ssid;
 	unsigned int key_mgmt_suite;
 	u16 status;
+	const u8 *pmkid;
 };
 
 /**
@@ -4112,6 +4144,8 @@ struct cfg80211_pmsr_capabilities {
  * @signal_type: signal type reported in &struct cfg80211_bss.
  * @cipher_suites: supported cipher suites
  * @n_cipher_suites: number of supported cipher suites
+ * @akm_suites: supported AKM suites
+ * @n_akm_suites: number of supported AKM suites
  * @retry_short: Retry limit for short frames (dot11ShortRetryLimit)
  * @retry_long: Retry limit for long frames (dot11LongRetryLimit)
  * @frag_threshold: Fragmentation threshold (dot11FragmentationThreshold);
@@ -4310,6 +4344,9 @@ struct wiphy {
 	int n_cipher_suites;
 	const u32 *cipher_suites;
 
+	int n_akm_suites;
+	const u32 *akm_suites;
+
 	u8 retry_short;
 	u8 retry_long;
 	u32 frag_threshold;
@@ -4573,6 +4610,17 @@ struct cfg80211_cqm_config;
  * @mesh_id_len: (private) Used by the internal configuration code
  * @mesh_id_up_len: (private) Used by the internal configuration code
  * @wext: (private) Used by the internal wireless extensions compat code
+ * @wext.ibss: (private) IBSS data part of wext handling
+ * @wext.connect: (private) connection handling data
+ * @wext.keys: (private) (WEP) key data
+ * @wext.ie: (private) extra elements for association
+ * @wext.ie_len: (private) length of extra elements
+ * @wext.bssid: (private) selected network BSSID
+ * @wext.ssid: (private) selected network SSID
+ * @wext.default_key: (private) selected default key index
+ * @wext.default_mgmt_key: (private) selected default management key index
+ * @wext.prev_bssid: (private) previous BSSID for reassociation
+ * @wext.prev_bssid_valid: (private) previous BSSID validity
  * @use_4addr: indicates 4addr mode is used on this interface, must be
  *	set by driver (if supported) on add_interface BEFORE registering the
  *	netdev and may otherwise be used by driver read-only, will be update
@@ -4672,7 +4720,8 @@ struct wireless_dev {
 		struct cfg80211_cached_keys *keys;
 		const u8 *ie;
 		size_t ie_len;
-		u8 bssid[ETH_ALEN], prev_bssid[ETH_ALEN];
+		u8 bssid[ETH_ALEN];
+		u8 prev_bssid[ETH_ALEN];
 		u8 ssid[IEEE80211_MAX_SSID_LEN];
 		s8 default_key, default_mgmt_key;
 		bool prev_bssid_valid;
@@ -5568,7 +5617,7 @@ void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid,
  * @dev: network device
  * @macaddr: the MAC address of the new candidate
  * @ie: information elements advertised by the peer candidate
- * @ie_len: lenght of the information elements buffer
+ * @ie_len: length of the information elements buffer
  * @gfp: allocation flags
  *
  * This function notifies cfg80211 that the mesh peer candidate has been
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 88219cc137c3..de866a7253c9 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -108,9 +108,15 @@
  * The driver is expected to initialize its private per-queue data for stations
  * and interfaces in the .add_interface and .sta_add ops.
  *
- * The driver can't access the queue directly. To dequeue a frame, it calls
- * ieee80211_tx_dequeue(). Whenever mac80211 adds a new frame to a queue, it
- * calls the .wake_tx_queue driver op.
+ * The driver can't access the queue directly. To dequeue a frame from a
+ * txq, it calls ieee80211_tx_dequeue(). Whenever mac80211 adds a new frame to a
+ * queue, it calls the .wake_tx_queue driver op.
+ *
+ * Drivers can optionally delegate responsibility for scheduling queues to
+ * mac80211, to take advantage of airtime fairness accounting. In this case, to
+ * obtain the next queue to pull frames from, the driver calls
+ * ieee80211_next_txq(). The driver is then expected to return the txq using
+ * ieee80211_return_txq().
  *
  * For AP powersave TIM handling, the driver only needs to indicate if it has
  * buffered packets in the driver specific data structures by calling
@@ -936,8 +942,32 @@ ieee80211_rate_get_vht_nss(const struct ieee80211_tx_rate *rate)
  * @band: the band to transmit on (use for checking for races)
  * @hw_queue: HW queue to put the frame on, skb_get_queue_mapping() gives the AC
  * @ack_frame_id: internal frame ID for TX status, used internally
- * @control: union for control data
- * @status: union for status data
+ * @control: union part for control data
+ * @control.rates: TX rates array to try
+ * @control.rts_cts_rate_idx: rate for RTS or CTS
+ * @control.use_rts: use RTS
+ * @control.use_cts_prot: use RTS/CTS
+ * @control.short_preamble: use short preamble (CCK only)
+ * @control.skip_table: skip externally configured rate table
+ * @control.jiffies: timestamp for expiry on powersave clients
+ * @control.vif: virtual interface (may be NULL)
+ * @control.hw_key: key to encrypt with (may be NULL)
+ * @control.flags: control flags, see &enum mac80211_tx_control_flags
+ * @control.enqueue_time: enqueue time (for iTXQs)
+ * @driver_rates: alias to @control.rates to reserve space
+ * @pad: padding
+ * @rate_driver_data: driver use area if driver needs @control.rates
+ * @status: union part for status data
+ * @status.rates: attempted rates
+ * @status.ack_signal: ACK signal
+ * @status.ampdu_ack_len: AMPDU ack length
+ * @status.ampdu_len: AMPDU length
+ * @status.antenna: (legacy, kept only for iwlegacy)
+ * @status.tx_time: airtime consumed for transmission
+ * @status.is_valid_ack_signal: ACK signal is valid
+ * @status.status_driver_data: driver use area
+ * @ack: union part for pure ACK data
+ * @ack.cookie: cookie for the ACK
  * @driver_data: array of driver_data pointers
  * @ampdu_ack_len: number of acked aggregated frames.
  * 	relevant only if IEEE80211_TX_STAT_AMPDU was set.
@@ -1157,6 +1187,7 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
  * @RX_FLAG_AMPDU_EOF_BIT_KNOWN: The EOF value is known
  * @RX_FLAG_RADIOTAP_HE: HE radiotap data is present
  *	(&struct ieee80211_radiotap_he, mac80211 will fill in
+ *	
  *	 - DATA3_DATA_MCS
  *	 - DATA3_DATA_DCM
  *	 - DATA3_CODING
@@ -1164,6 +1195,7 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
  *	 - DATA5_DATA_BW_RU_ALLOC
  *	 - DATA6_NSTS
  *	 - DATA3_STBC
+ *	
  *	from the RX info data, so leave those zeroed when building this data)
  * @RX_FLAG_RADIOTAP_HE_MU: HE MU radiotap data is present
  *	(&struct ieee80211_radiotap_he_mu)
@@ -1214,7 +1246,7 @@ enum mac80211_rx_flags {
  * @RX_ENC_FLAG_HT_GF: This frame was received in a HT-greenfield transmission,
  *	if the driver fills this value it should add
  *	%IEEE80211_RADIOTAP_MCS_HAVE_FMT
- *	to hw.radiotap_mcs_details to advertise that fact
+ *	to @hw.radiotap_mcs_details to advertise that fact.
  * @RX_ENC_FLAG_LDPC: LDPC was used
  * @RX_ENC_FLAG_STBC_MASK: STBC 2 bit bitmask. 1 - Nss=1, 2 - Nss=2, 3 - Nss=3
  * @RX_ENC_FLAG_BF: packet was beamformed
@@ -2184,6 +2216,9 @@ struct ieee80211_txq {
  *	MMPDUs on station interfaces. This of course requires the driver to use
  *	TXQs to start with.
  *
+ * @IEEE80211_HW_TX_STATUS_NO_AMPDU_LEN: Driver does not report accurate A-MPDU
+ *	length in tx status information
+ *
  * @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays
  */
 enum ieee80211_hw_flags {
@@ -2232,6 +2267,7 @@ enum ieee80211_hw_flags {
 	IEEE80211_HW_BUFF_MMPDU_TXQ,
 	IEEE80211_HW_SUPPORTS_VHT_EXT_NSS_BW,
 	IEEE80211_HW_STA_MMPDU_TXQ,
+	IEEE80211_HW_TX_STATUS_NO_AMPDU_LEN,
 
 	/* keep last, obviously */
 	NUM_IEEE80211_HW_FLAGS
@@ -2323,12 +2359,14 @@ enum ieee80211_hw_flags {
  * @radiotap_he: HE radiotap validity flags
  *
  * @radiotap_timestamp: Information for the radiotap timestamp field; if the
- *	'units_pos' member is set to a non-negative value it must be set to
- *	a combination of a IEEE80211_RADIOTAP_TIMESTAMP_UNIT_* and a
- *	IEEE80211_RADIOTAP_TIMESTAMP_SPOS_* value, and then the timestamp
+ *	@units_pos member is set to a non-negative value then the timestamp
  *	field will be added and populated from the &struct ieee80211_rx_status
- *	device_timestamp. If the 'accuracy' member is non-negative, it's put
- *	into the accuracy radiotap field and the accuracy known flag is set.
+ *	device_timestamp.
+ * @radiotap_timestamp.units_pos: Must be set to a combination of a
+ *	IEEE80211_RADIOTAP_TIMESTAMP_UNIT_* and a
+ *	IEEE80211_RADIOTAP_TIMESTAMP_SPOS_* value.
+ * @radiotap_timestamp.accuracy: If non-negative, fills the accuracy in the
+ *	radiotap field and the accuracy known flag will be set.
  *
  * @netdev_features: netdev features to be set in each netdev created
  *	from this HW. Note that not all features are usable with mac80211,
@@ -2354,6 +2392,9 @@ enum ieee80211_hw_flags {
  * @tx_sk_pacing_shift: Pacing shift to set on TCP sockets when frames from
  *	them are encountered. The default should typically not be changed,
  *	unless the driver has good reasons for needing more buffers.
+ *
+ * @weight_multiplier: Driver specific airtime weight multiplier used while
+ *	refilling deficit of each TXQ.
  */
 struct ieee80211_hw {
 	struct ieee80211_conf conf;
@@ -2390,6 +2431,7 @@ struct ieee80211_hw {
 	const struct ieee80211_cipher_scheme *cipher_schemes;
 	u8 max_nan_de_entries;
 	u8 tx_sk_pacing_shift;
+	u8 weight_multiplier;
 };
 
 static inline bool _ieee80211_hw_check(struct ieee80211_hw *hw,
@@ -5402,6 +5444,34 @@ void ieee80211_sta_eosp(struct ieee80211_sta *pubsta);
 void ieee80211_send_eosp_nullfunc(struct ieee80211_sta *pubsta, int tid);
 
 /**
+ * ieee80211_sta_register_airtime - register airtime usage for a sta/tid
+ *
+ * Register airtime usage for a given sta on a given tid. The driver can call
+ * this function to notify mac80211 that a station used a certain amount of
+ * airtime. This information will be used by the TXQ scheduler to schedule
+ * stations in a way that ensures airtime fairness.
+ *
+ * The reported airtime should as a minimum include all time that is spent
+ * transmitting to the remote station, including overhead and padding, but not
+ * including time spent waiting for a TXOP. If the time is not reported by the
+ * hardware it can in some cases be calculated from the rate and known frame
+ * composition. When possible, the time should include any failed transmission
+ * attempts.
+ *
+ * The driver can either call this function synchronously for every packet or
+ * aggregate, or asynchronously as airtime usage information becomes available.
+ * TX and RX airtime can be reported together, or separately by setting one of
+ * them to 0.
+ *
+ * @pubsta: the station
+ * @tid: the TID to register airtime for
+ * @tx_airtime: airtime used during TX (in usec)
+ * @rx_airtime: airtime used during RX (in usec)
+ */
+void ieee80211_sta_register_airtime(struct ieee80211_sta *pubsta, u8 tid,
+				    u32 tx_airtime, u32 rx_airtime);
+
+/**
  * ieee80211_iter_keys - iterate keys programmed into the device
  * @hw: pointer obtained from ieee80211_alloc_hw()
  * @vif: virtual interface to iterate, may be %NULL for all
@@ -6103,7 +6173,8 @@ void ieee80211_unreserve_tid(struct ieee80211_sta *sta, u8 tid);
  * ieee80211_tx_dequeue - dequeue a packet from a software tx queue
  *
  * @hw: pointer as obtained from ieee80211_alloc_hw()
- * @txq: pointer obtained from station or virtual interface
+ * @txq: pointer obtained from station or virtual interface, or from
+ *	ieee80211_next_txq()
  *
  * Returns the skb if successful, %NULL if no frame was available.
  *
@@ -6119,6 +6190,94 @@ struct sk_buff *ieee80211_tx_dequeue(struct ieee80211_hw *hw,
 				     struct ieee80211_txq *txq);
 
 /**
+ * ieee80211_next_txq - get next tx queue to pull packets from
+ *
+ * @hw: pointer as obtained from ieee80211_alloc_hw()
+ * @ac: AC number to return packets from.
+ *
+ * Should only be called between calls to ieee80211_txq_schedule_start()
+ * and ieee80211_txq_schedule_end().
+ * Returns the next txq if successful, %NULL if no queue is eligible. If a txq
+ * is returned, it should be returned with ieee80211_return_txq() after the
+ * driver has finished scheduling it.
+ */
+struct ieee80211_txq *ieee80211_next_txq(struct ieee80211_hw *hw, u8 ac);
+
+/**
+ * ieee80211_return_txq - return a TXQ previously acquired by ieee80211_next_txq()
+ *
+ * @hw: pointer as obtained from ieee80211_alloc_hw()
+ * @txq: pointer obtained from station or virtual interface
+ *
+ * Should only be called between calls to ieee80211_txq_schedule_start()
+ * and ieee80211_txq_schedule_end().
+ */
+void ieee80211_return_txq(struct ieee80211_hw *hw, struct ieee80211_txq *txq);
+
+/**
+ * ieee80211_txq_schedule_start - acquire locks for safe scheduling of an AC
+ *
+ * @hw: pointer as obtained from ieee80211_alloc_hw()
+ * @ac: AC number to acquire locks for
+ *
+ * Acquire locks needed to schedule TXQs from the given AC. Should be called
+ * before ieee80211_next_txq() or ieee80211_return_txq().
+ */
+void ieee80211_txq_schedule_start(struct ieee80211_hw *hw, u8 ac)
+	__acquires(txq_lock);
+
+/**
+ * ieee80211_txq_schedule_end - release locks for safe scheduling of an AC
+ *
+ * @hw: pointer as obtained from ieee80211_alloc_hw()
+ * @ac: AC number to acquire locks for
+ *
+ * Release locks previously acquired by ieee80211_txq_schedule_end().
+ */
+void ieee80211_txq_schedule_end(struct ieee80211_hw *hw, u8 ac)
+	__releases(txq_lock);
+
+/**
+ * ieee80211_schedule_txq - schedule a TXQ for transmission
+ *
+ * @hw: pointer as obtained from ieee80211_alloc_hw()
+ * @txq: pointer obtained from station or virtual interface
+ *
+ * Schedules a TXQ for transmission if it is not already scheduled. Takes a
+ * lock, which means it must *not* be called between
+ * ieee80211_txq_schedule_start() and ieee80211_txq_schedule_end()
+ */
+void ieee80211_schedule_txq(struct ieee80211_hw *hw, struct ieee80211_txq *txq)
+	__acquires(txq_lock) __releases(txq_lock);
+
+/**
+ * ieee80211_txq_may_transmit - check whether TXQ is allowed to transmit
+ *
+ * This function is used to check whether given txq is allowed to transmit by
+ * the airtime scheduler, and can be used by drivers to access the airtime
+ * fairness accounting without going using the scheduling order enfored by
+ * next_txq().
+ *
+ * Returns %true if the airtime scheduler thinks the TXQ should be allowed to
+ * transmit, and %false if it should be throttled. This function can also have
+ * the side effect of rotating the TXQ in the scheduler rotation, which will
+ * eventually bring the deficit to positive and allow the station to transmit
+ * again.
+ *
+ * The API ieee80211_txq_may_transmit() also ensures that TXQ list will be
+ * aligned aginst driver's own round-robin scheduler list. i.e it rotates
+ * the TXQ list till it makes the requested node becomes the first entry
+ * in TXQ list. Thus both the TXQ list and driver's list are in sync. If this
+ * function returns %true, the driver is expected to schedule packets
+ * for transmission, and then return the TXQ through ieee80211_return_txq().
+ *
+ * @hw: pointer as obtained from ieee80211_alloc_hw()
+ * @txq: pointer obtained from station or virtual interface
+ */
+bool ieee80211_txq_may_transmit(struct ieee80211_hw *hw,
+				struct ieee80211_txq *txq);
+
+/**
  * ieee80211_txq_get_depth - get pending frame/byte count of given txq
  *
  * The values are not guaranteed to be coherent with regard to each other, i.e.
diff --git a/include/net/netlink.h b/include/net/netlink.h
index 4c1e99303b5a..23f27b0b3cef 100644
--- a/include/net/netlink.h
+++ b/include/net/netlink.h
@@ -306,10 +306,14 @@ struct nla_policy {
 #define NLA_POLICY_ETH_ADDR		NLA_POLICY_EXACT_LEN(ETH_ALEN)
 #define NLA_POLICY_ETH_ADDR_COMPAT	NLA_POLICY_EXACT_LEN_WARN(ETH_ALEN)
 
-#define NLA_POLICY_NESTED(maxattr, policy) \
+#define _NLA_POLICY_NESTED(maxattr, policy) \
 	{ .type = NLA_NESTED, .validation_data = policy, .len = maxattr }
-#define NLA_POLICY_NESTED_ARRAY(maxattr, policy) \
+#define _NLA_POLICY_NESTED_ARRAY(maxattr, policy) \
 	{ .type = NLA_NESTED_ARRAY, .validation_data = policy, .len = maxattr }
+#define NLA_POLICY_NESTED(policy) \
+	_NLA_POLICY_NESTED(ARRAY_SIZE(policy) - 1, policy)
+#define NLA_POLICY_NESTED_ARRAY(policy) \
+	_NLA_POLICY_NESTED_ARRAY(ARRAY_SIZE(policy) - 1, policy)
 
 #define __NLA_ENSURE(condition) BUILD_BUG_ON_ZERO(!(condition))
 #define NLA_ENSURE_INT_TYPE(tp)				\
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 31ae5c7f10e3..dd4f86ee286e 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -1565,6 +1565,12 @@ enum nl80211_commands {
  *	(a u32 with flags from &enum nl80211_wpa_versions).
  * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to
  *	indicate which key management algorithm(s) to use (an array of u32).
+ *	This attribute is also sent in response to @NL80211_CMD_GET_WIPHY,
+ *	indicating the supported AKM suites, intended for specific drivers which
+ *	implement SME and have constraints on which AKMs are supported and also
+ *	the cases where an AKM support is offloaded to the driver/firmware.
+ *	If there is no such notification from the driver, user space should
+ *	assume the driver supports all the AKM suites.
  *
  * @NL80211_ATTR_REQ_IE: (Re)association request information elements as
  *	sent out by the card, for ROAM and successful CONNECT events.
@@ -2260,10 +2266,10 @@ enum nl80211_commands {
  *     &enum nl80211_external_auth_action value). This is used with the
  *     %NL80211_CMD_EXTERNAL_AUTH request event.
  * @NL80211_ATTR_EXTERNAL_AUTH_SUPPORT: Flag attribute indicating that the user
- *     space supports external authentication. This attribute shall be used
- *     only with %NL80211_CMD_CONNECT request. The driver may offload
- *     authentication processing to user space if this capability is indicated
- *     in NL80211_CMD_CONNECT requests from the user space.
+ *	space supports external authentication. This attribute shall be used
+ *	with %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP request. The driver
+ *	may offload authentication processing to user space if this capability
+ *	is indicated in the respective requests from the user space.
  *
  * @NL80211_ATTR_NSS: Station's New/updated  RX_NSS value notified using this
  *	u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED.
@@ -2299,6 +2305,9 @@ enum nl80211_commands {
  *	This is also used for capability advertisement in the wiphy information,
  *	with the appropriate sub-attributes.
  *
+ * @NL80211_ATTR_AIRTIME_WEIGHT: Station's weight when scheduled by the airtime
+ *	scheduler.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2748,6 +2757,8 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_PEER_MEASUREMENTS,
 
+	NL80211_ATTR_AIRTIME_WEIGHT,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -3125,6 +3136,9 @@ enum nl80211_sta_bss_param {
  *	might not be fully accurate.
  * @NL80211_STA_INFO_CONNECTED_TO_GATE: set to true if STA has a path to a
  *	mesh gate (u8, 0 or 1)
+ * @NL80211_STA_INFO_TX_DURATION: aggregate PPDU duration for all frames
+ *	sent to the station (u64, usec)
+ * @NL80211_STA_INFO_AIRTIME_WEIGHT: current airtime weight for station (u16)
  * @__NL80211_STA_INFO_AFTER_LAST: internal
  * @NL80211_STA_INFO_MAX: highest possible station info attribute
  */
@@ -3168,6 +3182,8 @@ enum nl80211_sta_info {
 	NL80211_STA_INFO_RX_MPDUS,
 	NL80211_STA_INFO_FCS_ERROR_COUNT,
 	NL80211_STA_INFO_CONNECTED_TO_GATE,
+	NL80211_STA_INFO_TX_DURATION,
+	NL80211_STA_INFO_AIRTIME_WEIGHT,
 
 	/* keep last */
 	__NL80211_STA_INFO_AFTER_LAST,
@@ -3277,8 +3293,10 @@ enum nl80211_mpath_flags {
  * 	&enum nl80211_mpath_flags;
  * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec
  * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries
+ * @NL80211_MPATH_INFO_HOP_COUNT: hop count to destination
+ * @NL80211_MPATH_INFO_PATH_CHANGE: total number of path changes to destination
  * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number
- *	currently defind
+ *	currently defined
  * @__NL80211_MPATH_INFO_AFTER_LAST: internal use
  */
 enum nl80211_mpath_info {
@@ -3290,6 +3308,8 @@ enum nl80211_mpath_info {
 	NL80211_MPATH_INFO_FLAGS,
 	NL80211_MPATH_INFO_DISCOVERY_TIMEOUT,
 	NL80211_MPATH_INFO_DISCOVERY_RETRIES,
+	NL80211_MPATH_INFO_HOP_COUNT,
+	NL80211_MPATH_INFO_PATH_CHANGE,
 
 	/* keep last */
 	__NL80211_MPATH_INFO_AFTER_LAST,
@@ -5316,6 +5336,13 @@ enum nl80211_feature_flags {
  *      if this flag is not set. Ignoring this can leak clear text packets and/or
  *      freeze the connection.
  *
+ * @NL80211_EXT_FEATURE_AIRTIME_FAIRNESS: Driver supports getting airtime
+ *	fairness for transmitted packets and has enabled airtime fairness
+ *	scheduling.
+ *
+ * @NL80211_EXT_FEATURE_AP_PMKSA_CACHING: Driver/device supports PMKSA caching
+ *	(set/del PMKSA operations) in AP mode.
+ *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
  */
@@ -5355,6 +5382,8 @@ enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT,
 	NL80211_EXT_FEATURE_CAN_REPLACE_PTK0,
 	NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER,
+	NL80211_EXT_FEATURE_AIRTIME_FAIRNESS,
+	NL80211_EXT_FEATURE_AP_PMKSA_CACHING,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
@@ -5606,9 +5635,14 @@ enum nl80211_crit_proto_id {
  * Used by cfg80211_rx_mgmt()
  *
  * @NL80211_RXMGMT_FLAG_ANSWERED: frame was answered by device/driver.
+ * @NL80211_RXMGMT_FLAG_EXTERNAL_AUTH: Host driver intends to offload
+ *	the authentication. Exclusively defined for host drivers that
+ *	advertises the SME functionality but would like the userspace
+ *	to handle certain authentication algorithms (e.g. SAE).
  */
 enum nl80211_rxmgmt_flags {
 	NL80211_RXMGMT_FLAG_ANSWERED = 1 << 0,
+	NL80211_RXMGMT_FLAG_EXTERNAL_AUTH = 1 << 1,
 };
 
 /*