Merge tag 'arm-soc/for-4.13/devicetree-arm64' of http://github.com/Broadcom/stblinux into next/dt64

This pull request contains Broadcom ARM64-based SoCs Device Tree changes for
4.13. Please note the following from Eric:

I've based this summary on the bcm2835-dt-next tag, to clarify what's in this
patch series, but it does require being careful since it involves a cross-merge
between branches.

- Anup documents the Broadcom Stingray binding, common clocks, adds initial
  support for the Stingray DTSI and DTS files and adds support for the PL022,
  PL330 and SP805

- Sandeep adds the clock nodes to the Stingray Device Tree nodes

- Pramod adds support for the NAND, pinctrl, GPIO to the Stingray Device Tree nodes

- Oza adds I2C Device Tree nodes to the Stingray DTSes

- Srinath adds PWM and SDHCI Device Tree nodes for the Stingray SoC

- Ravijeta adds support for the USB Dual Role PHY on Northstar 2

- Gerd starts adding references to the sdhost and sdhci controllers, and then
  switches the sdcard to to use the SDHOST (faster than SDHCI)

- Stefan defines the BCM2837 thermal coefficients in order for the Raspberry Pi
  thermal driver to work correctly

* tag 'arm-soc/for-4.13/devicetree-arm64' of http://github.com/Broadcom/stblinux:
  arm64: dts: NS2: Add USB DRD PHY device tree node
  ARM64: dts: bcm2837: Define CPU thermal coefficients
  arm64: dts: Add PWM and SDHCI DT nodes for Stingray SOC
  arm64: dts: Add PL022, PL330 and SP805 DT nodes for Stingray
  arm64: dts: Add I2C DT nodes for Stingray SoC
  arm64: dts: Add GPIO DT nodes for Stingray SOC
  arm64: dts: Add pinctrl DT nodes for Stingray SOC
  arm64: dts: Add NAND DT nodes for Stingray SOC
  arm64: dts: Add clock DT nodes for Stingray SOC
  arm64: dts: Initial DTS files for Broadcom Stingray SOC
  dt-bindings: clk: Extend binding doc for Stingray SOC
  dt-bindings: bcm: Add Broadcom Stingray bindings document
  ARM: dts: bcm283x: switch from &sdhci to &sdhost
  arm64: dts: bcm2837: add &sdhci and &sdhost
  ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point
  ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v6)

Signed-off-by: Olof Johansson <olof@lixom.net>

2 files changed, 169 insertions, 0 deletions

diff --git a/include/dt-bindings/clock/bcm-sr.h b/include/dt-bindings/clock/bcm-sr.h
new file mode 100644
index 000000000000..cff6c6fe2947
--- /dev/null
+++ b/include/dt-bindings/clock/bcm-sr.h
@@ -0,0 +1,101 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2017 Broadcom. All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _CLOCK_BCM_SR_H
+#define _CLOCK_BCM_SR_H
+
+/* GENPLL 0 clock channel ID SCR HSLS FS PCIE */
+#define BCM_SR_GENPLL0			0
+#define BCM_SR_GENPLL0_SATA_CLK		1
+#define BCM_SR_GENPLL0_SCR_CLK		2
+#define BCM_SR_GENPLL0_250M_CLK		3
+#define BCM_SR_GENPLL0_PCIE_AXI_CLK	4
+#define BCM_SR_GENPLL0_PAXC_AXI_X2_CLK	5
+#define BCM_SR_GENPLL0_PAXC_AXI_CLK	6
+
+/* GENPLL 1 clock channel ID MHB PCIE NITRO */
+#define BCM_SR_GENPLL1			0
+#define BCM_SR_GENPLL1_PCIE_TL_CLK	1
+#define BCM_SR_GENPLL1_MHB_APB_CLK	2
+
+/* GENPLL 2 clock channel ID NITRO MHB*/
+#define BCM_SR_GENPLL2			0
+#define BCM_SR_GENPLL2_NIC_CLK		1
+#define BCM_SR_GENPLL2_250_NITRO_CLK	2
+#define BCM_SR_GENPLL2_125_NITRO_CLK	3
+#define BCM_SR_GENPLL2_CHIMP_CLK	4
+
+/* GENPLL 3 HSLS clock channel ID */
+#define BCM_SR_GENPLL3			0
+#define BCM_SR_GENPLL3_HSLS_CLK		1
+#define BCM_SR_GENPLL3_SDIO_CLK		2
+
+/* GENPLL 4 SCR clock channel ID */
+#define BCM_SR_GENPLL4			0
+#define BCM_SR_GENPLL4_CCN_CLK		1
+
+/* GENPLL 5 FS4 clock channel ID */
+#define BCM_SR_GENPLL5			0
+#define BCM_SR_GENPLL5_FS_CLK		1
+#define BCM_SR_GENPLL5_SPU_CLK		2
+
+/* GENPLL 6 NITRO clock channel ID */
+#define BCM_SR_GENPLL6			0
+#define BCM_SR_GENPLL6_48_USB_CLK	1
+
+/* LCPLL0  clock channel ID */
+#define BCM_SR_LCPLL0			0
+#define BCM_SR_LCPLL0_SATA_REF_CLK	1
+#define BCM_SR_LCPLL0_USB_REF_CLK	2
+#define BCM_SR_LCPLL0_SATA_REFPN_CLK	3
+
+/* LCPLL1  clock channel ID */
+#define BCM_SR_LCPLL1			0
+#define BCM_SR_LCPLL1_WAN_CLK		1
+
+/* LCPLL PCIE  clock channel ID */
+#define BCM_SR_LCPLL_PCIE		0
+#define BCM_SR_LCPLL_PCIE_PHY_REF_CLK	1
+
+/* GENPLL EMEM0 clock channel ID */
+#define BCM_SR_EMEMPLL0			0
+#define BCM_SR_EMEMPLL0_EMEM_CLK	1
+
+/* GENPLL EMEM0 clock channel ID */
+#define BCM_SR_EMEMPLL1			0
+#define BCM_SR_EMEMPLL1_EMEM_CLK	1
+
+/* GENPLL EMEM0 clock channel ID */
+#define BCM_SR_EMEMPLL2			0
+#define BCM_SR_EMEMPLL2_EMEM_CLK	1
+
+#endif /* _CLOCK_BCM_SR_H */
diff --git a/include/dt-bindings/pinctrl/brcm,pinctrl-stingray.h b/include/dt-bindings/pinctrl/brcm,pinctrl-stingray.h
new file mode 100644
index 000000000000..caa6c664b4f6
--- /dev/null
+++ b/include/dt-bindings/pinctrl/brcm,pinctrl-stingray.h
@@ -0,0 +1,68 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2017 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __DT_BINDINGS_PINCTRL_BRCM_STINGRAY_H__
+#define __DT_BINDINGS_PINCTRL_BRCM_STINGRAY_H__
+
+/* Alternate functions available in MUX controller */
+#define MODE_NITRO				0
+#define MODE_NAND				1
+#define MODE_PNOR				2
+#define MODE_GPIO				3
+
+/* Pad configuration attribute */
+#define PAD_SLEW_RATE_ENA			(1 << 0)
+#define PAD_SLEW_RATE_ENA_MASK			(1 << 0)
+
+#define PAD_DRIVE_STRENGTH_2_MA			(0 << 1)
+#define PAD_DRIVE_STRENGTH_4_MA			(1 << 1)
+#define PAD_DRIVE_STRENGTH_6_MA			(2 << 1)
+#define PAD_DRIVE_STRENGTH_8_MA			(3 << 1)
+#define PAD_DRIVE_STRENGTH_10_MA		(4 << 1)
+#define PAD_DRIVE_STRENGTH_12_MA		(5 << 1)
+#define PAD_DRIVE_STRENGTH_14_MA		(6 << 1)
+#define PAD_DRIVE_STRENGTH_16_MA		(7 << 1)
+#define PAD_DRIVE_STRENGTH_MASK			(7 << 1)
+
+#define PAD_PULL_UP_ENA				(1 << 4)
+#define PAD_PULL_UP_ENA_MASK			(1 << 4)
+
+#define PAD_PULL_DOWN_ENA			(1 << 5)
+#define PAD_PULL_DOWN_ENA_MASK			(1 << 5)
+
+#define PAD_INPUT_PATH_DIS			(1 << 6)
+#define PAD_INPUT_PATH_DIS_MASK			(1 << 6)
+
+#define PAD_HYSTERESIS_ENA			(1 << 7)
+#define PAD_HYSTERESIS_ENA_MASK			(1 << 7)
+
+#endif