mtd: spinand: Octal DTR support

Merge series from Miquel Raynal <miquel.raynal@bootlin.com>:

This series adds support for 8D-8D-8D in SPI NAND, which can already be
leveraged without any SPI changes as controllers already have this
support for some SPI NOR devices.

Among the few spi-mem patches, they are needed for building the SPI NAND
changes (especially the ODTR introduction at the end) and therefore an
immutable tag will be needed for merging in the MTD tree (unless all the
series goes through MTD directly ofc).

27 files changed, 139 insertions, 213 deletions

diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h
index b14d165632e7..402b97d12138 100644
--- a/include/acpi/acpi_drivers.h
+++ b/include/acpi/acpi_drivers.h
@@ -51,7 +51,7 @@
 
 int acpi_irq_penalty_init(void);
 int acpi_pci_link_allocate_irq(acpi_handle handle, int index, int *triggering,
-			       int *polarity, char **name);
+			       int *polarity, char **name, u32 *gsi);
 int acpi_pci_link_free_irq(acpi_handle handle);
 
 /* ACPI PCI Device Binding */
diff --git a/include/drm/drm_atomic_helper.h b/include/drm/drm_atomic_helper.h
index 53382fe93537..e154ee4f0696 100644
--- a/include/drm/drm_atomic_helper.h
+++ b/include/drm/drm_atomic_helper.h
@@ -60,6 +60,12 @@ int drm_atomic_helper_check_plane_state(struct drm_plane_state *plane_state,
 int drm_atomic_helper_check_planes(struct drm_device *dev,
 			       struct drm_atomic_state *state);
 int drm_atomic_helper_check_crtc_primary_plane(struct drm_crtc_state *crtc_state);
+void drm_atomic_helper_commit_encoder_bridge_disable(struct drm_device *dev,
+						     struct drm_atomic_state *state);
+void drm_atomic_helper_commit_crtc_disable(struct drm_device *dev,
+					   struct drm_atomic_state *state);
+void drm_atomic_helper_commit_encoder_bridge_post_disable(struct drm_device *dev,
+							  struct drm_atomic_state *state);
 int drm_atomic_helper_check(struct drm_device *dev,
 			    struct drm_atomic_state *state);
 void drm_atomic_helper_commit_tail(struct drm_atomic_state *state);
@@ -89,8 +95,24 @@ drm_atomic_helper_update_legacy_modeset_state(struct drm_device *dev,
 void
 drm_atomic_helper_calc_timestamping_constants(struct drm_atomic_state *state);
 
+void drm_atomic_helper_commit_crtc_set_mode(struct drm_device *dev,
+					    struct drm_atomic_state *state);
+
 void drm_atomic_helper_commit_modeset_disables(struct drm_device *dev,
 					       struct drm_atomic_state *state);
+
+void drm_atomic_helper_commit_writebacks(struct drm_device *dev,
+					 struct drm_atomic_state *state);
+
+void drm_atomic_helper_commit_encoder_bridge_pre_enable(struct drm_device *dev,
+							struct drm_atomic_state *state);
+
+void drm_atomic_helper_commit_crtc_enable(struct drm_device *dev,
+					  struct drm_atomic_state *state);
+
+void drm_atomic_helper_commit_encoder_bridge_enable(struct drm_device *dev,
+						    struct drm_atomic_state *state);
+
 void drm_atomic_helper_commit_modeset_enables(struct drm_device *dev,
 					  struct drm_atomic_state *old_state);
 
diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h
index 0ff7ab4aa868..dbafe136833f 100644
--- a/include/drm/drm_bridge.h
+++ b/include/drm/drm_bridge.h
@@ -176,33 +176,17 @@ struct drm_bridge_funcs {
 	/**
 	 * @disable:
 	 *
-	 * The @disable callback should disable the bridge.
+	 * This callback should disable the bridge. It is called right before
+	 * the preceding element in the display pipe is disabled. If the
+	 * preceding element is a bridge this means it's called before that
+	 * bridge's @disable vfunc. If the preceding element is a &drm_encoder
+	 * it's called right before the &drm_encoder_helper_funcs.disable,
+	 * &drm_encoder_helper_funcs.prepare or &drm_encoder_helper_funcs.dpms
+	 * hook.
 	 *
 	 * The bridge can assume that the display pipe (i.e. clocks and timing
 	 * signals) feeding it is still running when this callback is called.
 	 *
-	 *
-	 * If the preceding element is a &drm_bridge, then this is called before
-	 * that bridge is disabled via one of:
-	 *
-	 * - &drm_bridge_funcs.disable
-	 * - &drm_bridge_funcs.atomic_disable
-	 *
-	 * If the preceding element of the bridge is a display controller, then
-	 * this callback is called before the encoder is disabled via one of:
-	 *
-	 * - &drm_encoder_helper_funcs.atomic_disable
-	 * - &drm_encoder_helper_funcs.prepare
-	 * - &drm_encoder_helper_funcs.disable
-	 * - &drm_encoder_helper_funcs.dpms
-	 *
-	 * and the CRTC is disabled via one of:
-	 *
-	 * - &drm_crtc_helper_funcs.prepare
-	 * - &drm_crtc_helper_funcs.atomic_disable
-	 * - &drm_crtc_helper_funcs.disable
-	 * - &drm_crtc_helper_funcs.dpms.
-	 *
 	 * The @disable callback is optional.
 	 *
 	 * NOTE:
@@ -215,34 +199,17 @@ struct drm_bridge_funcs {
 	/**
 	 * @post_disable:
 	 *
-	 * The bridge must assume that the display pipe (i.e. clocks and timing
-	 * signals) feeding this bridge is no longer running when the
-	 * @post_disable is called.
+	 * This callback should disable the bridge. It is called right after the
+	 * preceding element in the display pipe is disabled. If the preceding
+	 * element is a bridge this means it's called after that bridge's
+	 * @post_disable function. If the preceding element is a &drm_encoder
+	 * it's called right after the encoder's
+	 * &drm_encoder_helper_funcs.disable, &drm_encoder_helper_funcs.prepare
+	 * or &drm_encoder_helper_funcs.dpms hook.
 	 *
-	 * This callback should perform all the actions required by the hardware
-	 * after it has stopped receiving signals from the preceding element.
-	 *
-	 * If the preceding element is a &drm_bridge, then this is called after
-	 * that bridge is post-disabled (unless marked otherwise by the
-	 * @pre_enable_prev_first flag) via one of:
-	 *
-	 * - &drm_bridge_funcs.post_disable
-	 * - &drm_bridge_funcs.atomic_post_disable
-	 *
-	 * If the preceding element of the bridge is a display controller, then
-	 * this callback is called after the encoder is disabled via one of:
-	 *
-	 * - &drm_encoder_helper_funcs.atomic_disable
-	 * - &drm_encoder_helper_funcs.prepare
-	 * - &drm_encoder_helper_funcs.disable
-	 * - &drm_encoder_helper_funcs.dpms
-	 *
-	 * and the CRTC is disabled via one of:
-	 *
-	 * - &drm_crtc_helper_funcs.prepare
-	 * - &drm_crtc_helper_funcs.atomic_disable
-	 * - &drm_crtc_helper_funcs.disable
-	 * - &drm_crtc_helper_funcs.dpms
+	 * The bridge must assume that the display pipe (i.e. clocks and timing
+	 * signals) feeding it is no longer running when this callback is
+	 * called.
 	 *
 	 * The @post_disable callback is optional.
 	 *
@@ -285,30 +252,18 @@ struct drm_bridge_funcs {
 	/**
 	 * @pre_enable:
 	 *
-	 * The display pipe (i.e. clocks and timing signals) feeding this bridge
-	 * will not yet be running when the @pre_enable is called.
-	 *
-	 * This callback should perform all the necessary actions to prepare the
-	 * bridge to accept signals from the preceding element.
-	 *
-	 * If the preceding element is a &drm_bridge, then this is called before
-	 * that bridge is pre-enabled (unless marked otherwise by
-	 * @pre_enable_prev_first flag) via one of:
-	 *
-	 * - &drm_bridge_funcs.pre_enable
-	 * - &drm_bridge_funcs.atomic_pre_enable
-	 *
-	 * If the preceding element of the bridge is a display controller, then
-	 * this callback is called before the CRTC is enabled via one of:
-	 *
-	 * - &drm_crtc_helper_funcs.atomic_enable
-	 * - &drm_crtc_helper_funcs.commit
-	 *
-	 * and the encoder is enabled via one of:
+	 * This callback should enable the bridge. It is called right before
+	 * the preceding element in the display pipe is enabled. If the
+	 * preceding element is a bridge this means it's called before that
+	 * bridge's @pre_enable function. If the preceding element is a
+	 * &drm_encoder it's called right before the encoder's
+	 * &drm_encoder_helper_funcs.enable, &drm_encoder_helper_funcs.commit or
+	 * &drm_encoder_helper_funcs.dpms hook.
 	 *
-	 * - &drm_encoder_helper_funcs.atomic_enable
-	 * - &drm_encoder_helper_funcs.enable
-	 * - &drm_encoder_helper_funcs.commit
+	 * The display pipe (i.e. clocks and timing signals) feeding this bridge
+	 * will not yet be running when this callback is called. The bridge must
+	 * not enable the display link feeding the next bridge in the chain (if
+	 * there is one) when this callback is called.
 	 *
 	 * The @pre_enable callback is optional.
 	 *
@@ -322,31 +277,19 @@ struct drm_bridge_funcs {
 	/**
 	 * @enable:
 	 *
-	 * The @enable callback should enable the bridge.
+	 * This callback should enable the bridge. It is called right after
+	 * the preceding element in the display pipe is enabled. If the
+	 * preceding element is a bridge this means it's called after that
+	 * bridge's @enable function. If the preceding element is a
+	 * &drm_encoder it's called right after the encoder's
+	 * &drm_encoder_helper_funcs.enable, &drm_encoder_helper_funcs.commit or
+	 * &drm_encoder_helper_funcs.dpms hook.
 	 *
 	 * The bridge can assume that the display pipe (i.e. clocks and timing
 	 * signals) feeding it is running when this callback is called. This
 	 * callback must enable the display link feeding the next bridge in the
 	 * chain if there is one.
 	 *
-	 * If the preceding element is a &drm_bridge, then this is called after
-	 * that bridge is enabled via one of:
-	 *
-	 * - &drm_bridge_funcs.enable
-	 * - &drm_bridge_funcs.atomic_enable
-	 *
-	 * If the preceding element of the bridge is a display controller, then
-	 * this callback is called after the CRTC is enabled via one of:
-	 *
-	 * - &drm_crtc_helper_funcs.atomic_enable
-	 * - &drm_crtc_helper_funcs.commit
-	 *
-	 * and the encoder is enabled via one of:
-	 *
-	 * - &drm_encoder_helper_funcs.atomic_enable
-	 * - &drm_encoder_helper_funcs.enable
-	 * - drm_encoder_helper_funcs.commit
-	 *
 	 * The @enable callback is optional.
 	 *
 	 * NOTE:
@@ -359,30 +302,17 @@ struct drm_bridge_funcs {
 	/**
 	 * @atomic_pre_enable:
 	 *
-	 * The display pipe (i.e. clocks and timing signals) feeding this bridge
-	 * will not yet be running when the @atomic_pre_enable is called.
-	 *
-	 * This callback should perform all the necessary actions to prepare the
-	 * bridge to accept signals from the preceding element.
-	 *
-	 * If the preceding element is a &drm_bridge, then this is called before
-	 * that bridge is pre-enabled (unless marked otherwise by
-	 * @pre_enable_prev_first flag) via one of:
-	 *
-	 * - &drm_bridge_funcs.pre_enable
-	 * - &drm_bridge_funcs.atomic_pre_enable
+	 * This callback should enable the bridge. It is called right before
+	 * the preceding element in the display pipe is enabled. If the
+	 * preceding element is a bridge this means it's called before that
+	 * bridge's @atomic_pre_enable or @pre_enable function. If the preceding
+	 * element is a &drm_encoder it's called right before the encoder's
+	 * &drm_encoder_helper_funcs.atomic_enable hook.
 	 *
-	 * If the preceding element of the bridge is a display controller, then
-	 * this callback is called before the CRTC is enabled via one of:
-	 *
-	 * - &drm_crtc_helper_funcs.atomic_enable
-	 * - &drm_crtc_helper_funcs.commit
-	 *
-	 * and the encoder is enabled via one of:
-	 *
-	 * - &drm_encoder_helper_funcs.atomic_enable
-	 * - &drm_encoder_helper_funcs.enable
-	 * - &drm_encoder_helper_funcs.commit
+	 * The display pipe (i.e. clocks and timing signals) feeding this bridge
+	 * will not yet be running when this callback is called. The bridge must
+	 * not enable the display link feeding the next bridge in the chain (if
+	 * there is one) when this callback is called.
 	 *
 	 * The @atomic_pre_enable callback is optional.
 	 */
@@ -392,31 +322,18 @@ struct drm_bridge_funcs {
 	/**
 	 * @atomic_enable:
 	 *
-	 * The @atomic_enable callback should enable the bridge.
+	 * This callback should enable the bridge. It is called right after
+	 * the preceding element in the display pipe is enabled. If the
+	 * preceding element is a bridge this means it's called after that
+	 * bridge's @atomic_enable or @enable function. If the preceding element
+	 * is a &drm_encoder it's called right after the encoder's
+	 * &drm_encoder_helper_funcs.atomic_enable hook.
 	 *
 	 * The bridge can assume that the display pipe (i.e. clocks and timing
 	 * signals) feeding it is running when this callback is called. This
 	 * callback must enable the display link feeding the next bridge in the
 	 * chain if there is one.
 	 *
-	 * If the preceding element is a &drm_bridge, then this is called after
-	 * that bridge is enabled via one of:
-	 *
-	 * - &drm_bridge_funcs.enable
-	 * - &drm_bridge_funcs.atomic_enable
-	 *
-	 * If the preceding element of the bridge is a display controller, then
-	 * this callback is called after the CRTC is enabled via one of:
-	 *
-	 * - &drm_crtc_helper_funcs.atomic_enable
-	 * - &drm_crtc_helper_funcs.commit
-	 *
-	 * and the encoder is enabled via one of:
-	 *
-	 * - &drm_encoder_helper_funcs.atomic_enable
-	 * - &drm_encoder_helper_funcs.enable
-	 * - drm_encoder_helper_funcs.commit
-	 *
 	 * The @atomic_enable callback is optional.
 	 */
 	void (*atomic_enable)(struct drm_bridge *bridge,
@@ -424,32 +341,16 @@ struct drm_bridge_funcs {
 	/**
 	 * @atomic_disable:
 	 *
-	 * The @atomic_disable callback should disable the bridge.
+	 * This callback should disable the bridge. It is called right before
+	 * the preceding element in the display pipe is disabled. If the
+	 * preceding element is a bridge this means it's called before that
+	 * bridge's @atomic_disable or @disable vfunc. If the preceding element
+	 * is a &drm_encoder it's called right before the
+	 * &drm_encoder_helper_funcs.atomic_disable hook.
 	 *
 	 * The bridge can assume that the display pipe (i.e. clocks and timing
 	 * signals) feeding it is still running when this callback is called.
 	 *
-	 * If the preceding element is a &drm_bridge, then this is called before
-	 * that bridge is disabled via one of:
-	 *
-	 * - &drm_bridge_funcs.disable
-	 * - &drm_bridge_funcs.atomic_disable
-	 *
-	 * If the preceding element of the bridge is a display controller, then
-	 * this callback is called before the encoder is disabled via one of:
-	 *
-	 * - &drm_encoder_helper_funcs.atomic_disable
-	 * - &drm_encoder_helper_funcs.prepare
-	 * - &drm_encoder_helper_funcs.disable
-	 * - &drm_encoder_helper_funcs.dpms
-	 *
-	 * and the CRTC is disabled via one of:
-	 *
-	 * - &drm_crtc_helper_funcs.prepare
-	 * - &drm_crtc_helper_funcs.atomic_disable
-	 * - &drm_crtc_helper_funcs.disable
-	 * - &drm_crtc_helper_funcs.dpms.
-	 *
 	 * The @atomic_disable callback is optional.
 	 */
 	void (*atomic_disable)(struct drm_bridge *bridge,
@@ -458,34 +359,16 @@ struct drm_bridge_funcs {
 	/**
 	 * @atomic_post_disable:
 	 *
-	 * The bridge must assume that the display pipe (i.e. clocks and timing
-	 * signals) feeding this bridge is no longer running when the
-	 * @atomic_post_disable is called.
-	 *
-	 * This callback should perform all the actions required by the hardware
-	 * after it has stopped receiving signals from the preceding element.
+	 * This callback should disable the bridge. It is called right after the
+	 * preceding element in the display pipe is disabled. If the preceding
+	 * element is a bridge this means it's called after that bridge's
+	 * @atomic_post_disable or @post_disable function. If the preceding
+	 * element is a &drm_encoder it's called right after the encoder's
+	 * &drm_encoder_helper_funcs.atomic_disable hook.
 	 *
-	 * If the preceding element is a &drm_bridge, then this is called after
-	 * that bridge is post-disabled (unless marked otherwise by the
-	 * @pre_enable_prev_first flag) via one of:
-	 *
-	 * - &drm_bridge_funcs.post_disable
-	 * - &drm_bridge_funcs.atomic_post_disable
-	 *
-	 * If the preceding element of the bridge is a display controller, then
-	 * this callback is called after the encoder is disabled via one of:
-	 *
-	 * - &drm_encoder_helper_funcs.atomic_disable
-	 * - &drm_encoder_helper_funcs.prepare
-	 * - &drm_encoder_helper_funcs.disable
-	 * - &drm_encoder_helper_funcs.dpms
-	 *
-	 * and the CRTC is disabled via one of:
-	 *
-	 * - &drm_crtc_helper_funcs.prepare
-	 * - &drm_crtc_helper_funcs.atomic_disable
-	 * - &drm_crtc_helper_funcs.disable
-	 * - &drm_crtc_helper_funcs.dpms
+	 * The bridge must assume that the display pipe (i.e. clocks and timing
+	 * signals) feeding it is no longer running when this callback is
+	 * called.
 	 *
 	 * The @atomic_post_disable callback is optional.
 	 */
diff --git a/include/linux/filelock.h b/include/linux/filelock.h
index 54b824c05299..2f5e5588ee07 100644
--- a/include/linux/filelock.h
+++ b/include/linux/filelock.h
@@ -49,6 +49,7 @@ struct lease_manager_operations {
 	int (*lm_change)(struct file_lease *, int, struct list_head *);
 	void (*lm_setup)(struct file_lease *, void **);
 	bool (*lm_breaker_owns_lease)(struct file_lease *);
+	int (*lm_open_conflict)(struct file *, int);
 };
 
 struct lock_manager {
diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h
index 770f0dc993cc..a3a8989e3268 100644
--- a/include/linux/ftrace.h
+++ b/include/linux/ftrace.h
@@ -1167,7 +1167,7 @@ static inline void ftrace_init(void) { }
  */
 struct ftrace_graph_ent {
 	unsigned long func; /* Current function */
-	unsigned long depth;
+	long depth; /* signed to check for less than zero */
 } __packed;
 
 /*
diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h
index 2cf1bf65b225..0de12f14d6a4 100644
--- a/include/linux/hrtimer.h
+++ b/include/linux/hrtimer.h
@@ -2,7 +2,7 @@
 /*
  *  hrtimers - High-resolution kernel timers
  *
- *   Copyright(C) 2005, Thomas Gleixner <tglx@linutronix.de>
+ *   Copyright(C) 2005, Linutronix GmbH, Thomas Gleixner <tglx@kernel.org>
  *   Copyright(C) 2005, Red Hat, Inc., Ingo Molnar
  *
  *  data type definitions, declarations, prototypes
diff --git a/include/linux/iomap.h b/include/linux/iomap.h
index 520e967cb501..6bb941707d12 100644
--- a/include/linux/iomap.h
+++ b/include/linux/iomap.h
@@ -88,6 +88,9 @@ struct vm_fault;
 /*
  * Flags set by the core iomap code during operations:
  *
+ * IOMAP_F_FOLIO_BATCH indicates that the folio batch mechanism is active
+ * for this operation, set by iomap_fill_dirty_folios().
+ *
  * IOMAP_F_SIZE_CHANGED indicates to the iomap_end method that the file size
  * has changed as the result of this write operation.
  *
@@ -95,6 +98,7 @@ struct vm_fault;
  * range it covers needs to be remapped by the high level before the operation
  * can proceed.
  */
+#define IOMAP_F_FOLIO_BATCH	(1U << 13)
 #define IOMAP_F_SIZE_CHANGED	(1U << 14)
 #define IOMAP_F_STALE		(1U << 15)
 
@@ -352,8 +356,8 @@ bool iomap_dirty_folio(struct address_space *mapping, struct folio *folio);
 int iomap_file_unshare(struct inode *inode, loff_t pos, loff_t len,
 		const struct iomap_ops *ops,
 		const struct iomap_write_ops *write_ops);
-loff_t iomap_fill_dirty_folios(struct iomap_iter *iter, loff_t offset,
-		loff_t length);
+unsigned int iomap_fill_dirty_folios(struct iomap_iter *iter, loff_t *start,
+		loff_t end, unsigned int *iomap_flags);
 int iomap_zero_range(struct inode *inode, loff_t pos, loff_t len,
 		bool *did_zero, const struct iomap_ops *ops,
 		const struct iomap_write_ops *write_ops, void *private);
diff --git a/include/linux/ktime.h b/include/linux/ktime.h
index 383ed9985802..f247e564602f 100644
--- a/include/linux/ktime.h
+++ b/include/linux/ktime.h
@@ -3,7 +3,7 @@
  *
  *  ktime_t - nanosecond-resolution time format.
  *
- *   Copyright(C) 2005, Thomas Gleixner <tglx@linutronix.de>
+ *   Copyright(C) 2005, Linutronix GmbH, Thomas Gleixner <tglx@kernel.org>
  *   Copyright(C) 2005, Red Hat, Inc., Ingo Molnar
  *
  *  data type definitions, declarations, prototypes and macros.
diff --git a/include/linux/mtd/jedec.h b/include/linux/mtd/jedec.h
index 56047a4e54c9..255972f3d88d 100644
--- a/include/linux/mtd/jedec.h
+++ b/include/linux/mtd/jedec.h
@@ -2,7 +2,7 @@
 /*
  * Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org>
  *			 Steven J. Hill <sjhill@realitydiluted.com>
- *			 Thomas Gleixner <tglx@linutronix.de>
+ *			 Thomas Gleixner <tglx@kernel.org>
  *
  * Contains all JEDEC related definitions
  */
diff --git a/include/linux/mtd/nand-ecc-sw-hamming.h b/include/linux/mtd/nand-ecc-sw-hamming.h
index c6c71894c575..2aa2f8ef68d2 100644
--- a/include/linux/mtd/nand-ecc-sw-hamming.h
+++ b/include/linux/mtd/nand-ecc-sw-hamming.h
@@ -2,7 +2,7 @@
 /*
  *  Copyright (C) 2000-2010 Steven J. Hill <sjhill@realitydiluted.com>
  *			    David Woodhouse <dwmw2@infradead.org>
- *			    Thomas Gleixner <tglx@linutronix.de>
+ *			    Thomas Gleixner <tglx@kernel.org>
  *
  * This file is the header for the NAND Hamming ECC implementation.
  */
diff --git a/include/linux/mtd/ndfc.h b/include/linux/mtd/ndfc.h
index 98f075b86931..622891191e9c 100644
--- a/include/linux/mtd/ndfc.h
+++ b/include/linux/mtd/ndfc.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
- *  Copyright (c) 2006 Thomas Gleixner <tglx@linutronix.de>
+ *  Copyright (c) 2006 Linutronix GmbH, Thomas Gleixner <tglx@kernel.org>
  *
  *  Info:
  *   Contains defines, datastructures for ndfc nand controller
diff --git a/include/linux/mtd/onfi.h b/include/linux/mtd/onfi.h
index 55ab2e4d62f9..09a5cbd8f232 100644
--- a/include/linux/mtd/onfi.h
+++ b/include/linux/mtd/onfi.h
@@ -2,7 +2,7 @@
 /*
  * Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org>
  *			 Steven J. Hill <sjhill@realitydiluted.com>
- *			 Thomas Gleixner <tglx@linutronix.de>
+ *			 Thomas Gleixner <tglx@kernel.org>
  *
  * Contains all ONFI related definitions
  */
diff --git a/include/linux/mtd/platnand.h b/include/linux/mtd/platnand.h
index bc11eb6b593b..2df6fba699f2 100644
--- a/include/linux/mtd/platnand.h
+++ b/include/linux/mtd/platnand.h
@@ -2,7 +2,7 @@
 /*
  *  Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org>
  *			  Steven J. Hill <sjhill@realitydiluted.com>
- *			  Thomas Gleixner <tglx@linutronix.de>
+ *			  Thomas Gleixner <tglx@kernel.org>
  *
  * Contains all platform NAND related definitions.
  */
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index d30bdc3fcfd7..5c70e7bd3ed5 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -2,7 +2,7 @@
 /*
  *  Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org>
  *                        Steven J. Hill <sjhill@realitydiluted.com>
- *		          Thomas Gleixner <tglx@linutronix.de>
+ *		          Thomas Gleixner <tglx@kernel.org>
  *
  * Info:
  *	Contains standard defines and IDs for NAND flash devices
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 5870a9e514a5..d99b0fbc1942 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -5323,7 +5323,8 @@ netdev_features_t netdev_increment_features(netdev_features_t all,
 static inline netdev_features_t netdev_add_tso_features(netdev_features_t features,
 							netdev_features_t mask)
 {
-	return netdev_increment_features(features, NETIF_F_ALL_TSO, mask);
+	return netdev_increment_features(features, NETIF_F_ALL_TSO |
+					 NETIF_F_ALL_FOR_ALL, mask);
 }
 
 int __netdev_update_features(struct net_device *dev);
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index 9870d768db4c..9ded2e582c60 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -1,7 +1,7 @@
 /*
  * Performance events:
  *
- *    Copyright (C) 2008-2009, Thomas Gleixner <tglx@linutronix.de>
+ *    Copyright (C) 2008-2009, Linutronix GmbH, Thomas Gleixner <tglx@kernel.org>
  *    Copyright (C) 2008-2011, Red Hat, Inc., Ingo Molnar
  *    Copyright (C) 2008-2011, Red Hat, Inc., Peter Zijlstra
  *
diff --git a/include/linux/plist.h b/include/linux/plist.h
index 8c1c8adf7fe9..16cf4355b5c1 100644
--- a/include/linux/plist.h
+++ b/include/linux/plist.h
@@ -8,7 +8,7 @@
  * 2001-2005 (c) MontaVista Software, Inc.
  * Daniel Walker <dwalker@mvista.com>
  *
- * (C) 2005 Thomas Gleixner <tglx@linutronix.de>
+ * (C) 2005 Linutronix GmbH, Thomas Gleixner <tglx@kernel.org>
  *
  * Simplifications of the original code by
  * Oleg Nesterov <oleg@tv-sign.ru>
diff --git a/include/linux/rslib.h b/include/linux/rslib.h
index a04dacbdc8ae..a2848f6907e3 100644
--- a/include/linux/rslib.h
+++ b/include/linux/rslib.h
@@ -2,7 +2,7 @@
 /*
  * Generic Reed Solomon encoder / decoder library
  *
- * Copyright (C) 2004 Thomas Gleixner (tglx@linutronix.de)
+ * Copyright (C) 2004 Thomas Gleixner (tglx@kernel.org)
  *
  * RS code lifted from reed solomon library written by Phil Karn
  * Copyright 2002 Phil Karn, KA9Q
diff --git a/include/linux/soc/airoha/airoha_offload.h b/include/linux/soc/airoha/airoha_offload.h
index 4d23cbb7d407..ab64ecdf39a0 100644
--- a/include/linux/soc/airoha/airoha_offload.h
+++ b/include/linux/soc/airoha/airoha_offload.h
@@ -71,12 +71,12 @@ static inline void airoha_ppe_dev_check_skb(struct airoha_ppe_dev *dev,
 #define NPU_RX1_DESC_NUM	512
 
 /* CTRL */
-#define NPU_RX_DMA_DESC_LAST_MASK	BIT(29)
-#define NPU_RX_DMA_DESC_LEN_MASK	GENMASK(28, 15)
-#define NPU_RX_DMA_DESC_CUR_LEN_MASK	GENMASK(14, 1)
+#define NPU_RX_DMA_DESC_LAST_MASK	BIT(27)
+#define NPU_RX_DMA_DESC_LEN_MASK	GENMASK(26, 14)
+#define NPU_RX_DMA_DESC_CUR_LEN_MASK	GENMASK(13, 1)
 #define NPU_RX_DMA_DESC_DONE_MASK	BIT(0)
 /* INFO */
-#define NPU_RX_DMA_PKT_COUNT_MASK	GENMASK(31, 28)
+#define NPU_RX_DMA_PKT_COUNT_MASK	GENMASK(31, 29)
 #define NPU_RX_DMA_PKT_ID_MASK		GENMASK(28, 26)
 #define NPU_RX_DMA_SRC_PORT_MASK	GENMASK(25, 21)
 #define NPU_RX_DMA_CRSN_MASK		GENMASK(20, 16)
diff --git a/include/linux/spi/spi-mem.h b/include/linux/spi/spi-mem.h
index 82390712794c..e4db0924898c 100644
--- a/include/linux/spi/spi-mem.h
+++ b/include/linux/spi/spi-mem.h
@@ -20,10 +20,10 @@
 		.opcode = __opcode,				\
 	}
 
-#define SPI_MEM_DTR_OP_CMD(__opcode, __buswidth)		\
+#define SPI_MEM_DTR_OP_RPT_CMD(__opcode, __buswidth)		\
 	{							\
-		.nbytes = 1,					\
-		.opcode = __opcode,				\
+		.nbytes = 2,					\
+		.opcode = __opcode | __opcode << 8,		\
 		.buswidth = __buswidth,				\
 		.dtr = true,					\
 	}
@@ -43,6 +43,14 @@
 		.dtr = true,					\
 	}
 
+#define SPI_MEM_DTR_OP_RPT_ADDR(__val, __buswidth)		\
+	{							\
+		.nbytes = 2,					\
+		.val = __val | __val << 8,			\
+		.buswidth = __buswidth,				\
+		.dtr = true,					\
+	}
+
 #define SPI_MEM_OP_NO_ADDR	{ }
 
 #define SPI_MEM_OP_DUMMY(__nbytes, __buswidth)			\
diff --git a/include/linux/trace_recursion.h b/include/linux/trace_recursion.h
index ae04054a1be3..e6ca052b2a85 100644
--- a/include/linux/trace_recursion.h
+++ b/include/linux/trace_recursion.h
@@ -34,6 +34,13 @@ enum {
 	TRACE_INTERNAL_SIRQ_BIT,
 	TRACE_INTERNAL_TRANSITION_BIT,
 
+	/* Internal event use recursion bits */
+	TRACE_INTERNAL_EVENT_BIT,
+	TRACE_INTERNAL_EVENT_NMI_BIT,
+	TRACE_INTERNAL_EVENT_IRQ_BIT,
+	TRACE_INTERNAL_EVENT_SIRQ_BIT,
+	TRACE_INTERNAL_EVENT_TRANSITION_BIT,
+
 	TRACE_BRANCH_BIT,
 /*
  * Abuse of the trace_recursion.
@@ -58,6 +65,8 @@ enum {
 
 #define TRACE_LIST_START	TRACE_INTERNAL_BIT
 
+#define TRACE_EVENT_START	TRACE_INTERNAL_EVENT_BIT
+
 #define TRACE_CONTEXT_MASK	((1 << (TRACE_LIST_START + TRACE_CONTEXT_BITS)) - 1)
 
 /*
diff --git a/include/linux/uio_driver.h b/include/linux/uio_driver.h
index 18238dc8bfd3..334641e20fb1 100644
--- a/include/linux/uio_driver.h
+++ b/include/linux/uio_driver.h
@@ -3,7 +3,7 @@
  * include/linux/uio_driver.h
  *
  * Copyright(C) 2005, Benedikt Spranger <b.spranger@linutronix.de>
- * Copyright(C) 2005, Thomas Gleixner <tglx@linutronix.de>
+ * Copyright(C) 2005, Linutronix GmbH, Thomas Gleixner <tglx@kernel.org>
  * Copyright(C) 2006, Hans J. Koch <hjk@hansjkoch.de>
  * Copyright(C) 2006, Greg Kroah-Hartman <greg@kroah.com>
  *
diff --git a/include/trace/events/btrfs.h b/include/trace/events/btrfs.h
index 7e418f065b94..125bdc166bfe 100644
--- a/include/trace/events/btrfs.h
+++ b/include/trace/events/btrfs.h
@@ -224,7 +224,8 @@ DECLARE_EVENT_CLASS(btrfs__inode,
 		__entry->generation = BTRFS_I(inode)->generation;
 		__entry->last_trans = BTRFS_I(inode)->last_trans;
 		__entry->logged_trans = BTRFS_I(inode)->logged_trans;
-		__entry->root_objectid = btrfs_root_id(BTRFS_I(inode)->root);
+		__entry->root_objectid = BTRFS_I(inode)->root ?
+					 btrfs_root_id(BTRFS_I(inode)->root) : 0;
 	),
 
 	TP_printk_btrfs("root=%llu(%s) gen=%llu ino=%llu blocks=%llu "
diff --git a/include/trace/misc/nfs.h b/include/trace/misc/nfs.h
index c82233e950ac..a394b4d38e18 100644
--- a/include/trace/misc/nfs.h
+++ b/include/trace/misc/nfs.h
@@ -16,7 +16,6 @@ TRACE_DEFINE_ENUM(NFSERR_PERM);
 TRACE_DEFINE_ENUM(NFSERR_NOENT);
 TRACE_DEFINE_ENUM(NFSERR_IO);
 TRACE_DEFINE_ENUM(NFSERR_NXIO);
-TRACE_DEFINE_ENUM(NFSERR_EAGAIN);
 TRACE_DEFINE_ENUM(NFSERR_ACCES);
 TRACE_DEFINE_ENUM(NFSERR_EXIST);
 TRACE_DEFINE_ENUM(NFSERR_XDEV);
@@ -52,7 +51,6 @@ TRACE_DEFINE_ENUM(NFSERR_JUKEBOX);
 		{ NFSERR_NXIO,			"NXIO" }, \
 		{ ECHILD,			"CHILD" }, \
 		{ ETIMEDOUT,			"TIMEDOUT" }, \
-		{ NFSERR_EAGAIN,		"AGAIN" }, \
 		{ NFSERR_ACCES,			"ACCES" }, \
 		{ NFSERR_EXIST,			"EXIST" }, \
 		{ NFSERR_XDEV,			"XDEV" }, \
diff --git a/include/uapi/linux/nfs.h b/include/uapi/linux/nfs.h
index f356f2ba3814..71c7196d3281 100644
--- a/include/uapi/linux/nfs.h
+++ b/include/uapi/linux/nfs.h
@@ -49,7 +49,6 @@
 	NFSERR_NOENT = 2,		/* v2 v3 v4 */
 	NFSERR_IO = 5,			/* v2 v3 v4 */
 	NFSERR_NXIO = 6,		/* v2 v3 v4 */
-	NFSERR_EAGAIN = 11,		/* v2 v3 */
 	NFSERR_ACCES = 13,		/* v2 v3 v4 */
 	NFSERR_EXIST = 17,		/* v2 v3 v4 */
 	NFSERR_XDEV = 18,		/*    v3 v4 */
diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h
index c44a8fb3e418..72f03153dd32 100644
--- a/include/uapi/linux/perf_event.h
+++ b/include/uapi/linux/perf_event.h
@@ -2,7 +2,7 @@
 /*
  * Performance events:
  *
- *    Copyright (C) 2008-2009, Thomas Gleixner <tglx@linutronix.de>
+ *    Copyright (C) 2008-2009, Linutronix GmbH, Thomas Gleixner <tglx@kernel.org>
  *    Copyright (C) 2008-2011, Red Hat, Inc., Ingo Molnar
  *    Copyright (C) 2008-2011, Red Hat, Inc., Peter Zijlstra
  *
diff --git a/include/uapi/linux/xattr.h b/include/uapi/linux/xattr.h
index c7c85bb504ba..2e5aef48fa7e 100644
--- a/include/uapi/linux/xattr.h
+++ b/include/uapi/linux/xattr.h
@@ -23,7 +23,7 @@
 #define XATTR_REPLACE	0x2	/* set value, fail if attr does not exist */
 
 struct xattr_args {
-	__aligned_u64 __user value;
+	__aligned_u64 value;
 	__u32 size;
 	__u32 flags;
 };