Merge tag 'iio-for-6.16a-take2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

IIO: New device support, features and cleanup for 6.16 - take 2

Note - last minute rebase was to drop a typo patch that I'd accidentally
picked up (in the microblaze arch Kconfig)
Take 2 is due to that rebase messing up some fixes tags that were
referring to patches after that point.

There is a known merge conflict due to changes in neighbouring lines.

Stephen's resolution in linux-next is:
https://lore.kernel.org/linux-next/20250506155728.65605bae@canb.auug.org.au/

Added 3 named IIO reviewers to MAINTAINERS. This is a reflection of those
who have been doing much of this work for some time. Lars-Peter is
removed from the entry having moved on to other topics.  Thanks
Nuno, David and Andy for stepping up and Lars-Peter for all your
hard work in the past!

Includes the usual mix of new device support, features and general
cleanup.

This time we also have some tree wide changes.

- Rip out the iio_device_claim_direct_scoped() as it proved hard to work
  with.  This series includes quite a few related cleanups such as use
  of guard or factoring code out to allow direct returns.
- Switch from iio_device_claim/release_direct_mode() to new
  iio_device_claim/release_direct() which is structured so that sparse
  can warn on failed releases. There were a few false positives but
  those were mostly in code that benefited from being cleaned up as part
  of this process.
- Introduce iio_push_to_buffers_with_ts() to replace the _timestamp()
  version over time. This version takes the size of the supplied buffer
  which the core checks is at least as big as expected by calculation
  from channel descriptions of those channels enabled. Use this in
  an initial set of drivers.
- Add macros for IIO_DECLARE_BUFFER_WITH_TS() and
  IIO_DECLARE_DMA_BUFFER_WITH_TS() to avoid lots of fiddly code to ensure
  correctly aligned buffers for timestamps being added onto the end of
  channel data.

New device support
------------------

adi,ad3530r
- New driver for AD3530, AD3530R, AD3531 and AD3531R DACs with
  programmable gain controls. R variants have internal references.
adi,ad7476
- Add support (dt compatible only) for the Rohm BU79100G ADC which is
  fully compatible with the ti,ads7866.
adi,ad7606
- Support ad7606c-16 and ad7606c-18 devices. Includes switch to dynamic
  channel information allocation.
adi,ad7380
- Add support for the AD7389-4
dfrobot,sen0322
- New driver for this oxygen sensor.
mediatek,mt2701-auxadc
- Add binding for MT6893 which is fully compatible with already supported
  MT8173.
meson-saradc
- Support the GXLX SoCs.  Mostly this is a workaround for some unrelated
  clock control bits found in the ADC register map.
nuvoton,nct7201
- New driver for NCT7201 and NCT7202 I2C ADCs.
rohm,bd79124
- New driver for this 12-bit, 8-channel SAR ADC.
- Switch to new set_rv etc gpio callbacks that were added in 6.15.
rohm,bd79703
- Add support for BD79700, BD79701 and BD79702 DACs that have subsets of
  functionality of the already supported bd79703.  Included making this
  driver suitable for support device variants.
st,stm32-lptimer
- Add support for stm32pm25 to this trigger.

Features
--------

Beyond IIO
- Property iterator for named children.
core
- Enable writes for 64 bit integers used for standard IIO ABI elements.
  Previously these could be read only.
- Helper library that should avoid code duplication for simpler ADC
  bindings that have a child node per channel.
- Enforce that IIO_DMA_MINALIGN is always at least 8 (almost always true
  and simplifies code on all significant architectures)
core/backend
- Add support to control source of data - useful when the HDL includes
  things like generated ramps for testing purposes. Enable this for
  adi-axi-dac
adi,ad3552-hs
- Add debugfs related callbacks to allow debug access to register contents.
adi,ad4000
- Support SPI offload with appropriate FPGA firmware along with improving
  documentation.
adi,ad7293
- Add support for external reference voltage.
adi,ad7606
- Support SPI offload.
adi,ad7768-1
- Support reset GPIO.
adi,admv8818
- Support filter frequencies beyond 2^32.
adi,adxl345
- Add single and double tap events.
hid-sensor-prox
- Support 16-bit report sizes as seen on some Intel platforms.
invensense,icm42600
- Enable use of named interrupts to avoid problems with some wiring choices.
  Get the interrupt by name, but fallback to previous assumption on the first
  being INT1 if no names are supplied.
microchip,mcp3911
- Add reset gpio support.
rohm,bh7150
- Add reset gpio support.
st,stm32
- Add support to control oversampling.
ti,adc128s052
- Add support for ROHM BD79104 which is early compatible with the TI
  parts already supported by this driver. Includes some general driver
  cleanup and a separate dt binding.
- Simplify reference voltage handling by assuming it is fixed after enabling
  the supply.
winsen,mhz19b
- New driver for this C02 sensor.

Cleanup and minor fixes
-----------------------

dt-bindings
- Correct indentation and style for DTS examples.
- Use unevalutateProperties for SPI devices instead of additionalProperties
  to allow generic SPI properties from spi-peripheral-props.yaml
ABI Docs
- Add missing docs for sampling_frequency when it applies only to events.
Treewide
- Various minor tweaks, comment fixes and similar.
- Sort TI ADCs in Kconfig that had gotten out of order.
- Switch various drives that provide GPIO chip functionality to the new
  callbacks with return values.
- Standardize on { } formatting for all array sentinels.
- Make use of aligned_s64 in a few places to replace either wrong types
  or manually defined equivalents.
- Drop places where spi bits_per_word is set to 8 because that is the
  default anyway.

adi,ad_sigma_delta library
- Avoid a potential use of uninitialized data if reg_size has a value
  that is not supported (no drivers hit this but it is reasonable hardening)
adi,ad4030
- Add error checking for scan types and no longer store it in state.
- Rework code to reduce duplication.
- Move setting the mode from buffer preenable() to update_scan_mode(),
  better matching expected semantics of the two different callbacks.
- Improve data marshalling comments.
adi,ad4695
- Use u16 for buffer elements as oversampling is not yet supported except
  with SPI offload (which doesn't use this path).
adi,ad5592r
- Clean up destruction of mutexes.
- Use lock guards to simplify code (later patch fixes a missed unlock)
adi,ad5933
- Correct some incorrect settling times.
adi,ad7091
- Deduplicate handling of writable vs volatile registers as they are the
  inverse of each other for this device.
adi,ad7124
- Fix 3db Filter frequency.
- Remove ability to directly write the filter frequency (which was broken)
- Register naming improvements.
adi,ad7606
- Add a missing return value check.
- Fill in max sampling rates for all chips.
- Use devm_mutex_init()
- Fix up some kernel-doc formatting issues.
- Remove some camel case that snuck in.
- Drop setting address field in channels as easily established from other
  fields.
- Drop unnecessary parameter to ad76060_scale_setup_cb_t.
adi,ad7768-1
- Convert to regmap.
- Factor out buffer allocation.
- Tidy up headers.
adi,ad7944
- Stop setting bits_per_word in SPI xfers with no data.
adi,ad9832
- Add of_device_id table rather than just relying on fallbacks.
- Use FIELD_PREP() to set values of fields.
adi,admv1013
- Cleanup a pointless ternary.
adi,admv8818
- Fix up LPF Band 5 frequency which was slightly wrong.
- Fix an integer overflow.
- Fix range calculation
adi,adt7316
- Replace irqd_get_trigger_type(irq_get_irq_data()) with simpler
  irq_get_trigger_type()
adi,adxl345
- Use regmap cache instead of various state variables that were there to
  reduce bus accesses.
- Make regmap return value checking consistent across all call sites.
adi,axi-dac
- Add a check on number of channels (0 to 15 valid)
allwinner,sun20i
- Use new adc-helpers to replace local parsing code for channel nodes.
bosch,bmp290
- Move to local variables for sensor data marshalling removing the need
  for a messy definition that has to work for all supported parts.
  Follow up fix adds a missing initialization.
dynaimage,al3010 and dynaimage,al3320a
- Various minor cleanup to bring these drivers inline with reviewed feedback
  given on a new driver.
- Fix an error path in which power down is not called when it should be.
- Switch to regmap.
google,cros_ec
- Fix up a flexible array in middle of structure warning.
- Flush fifo when changing the timeout to avoid potential long wait
  for samples.
hid-sensor-rotation
- Remove an __aligned(16) marking that doesn't seem to be justified.
kionix,kxcjk-1013
- Deduplicate code for setting up interrupts.
microchip,mcp3911
- Fix handling of conversion results register which differs across supported
  devices.
idt,zopt2201
- Avoid duplicating register lists as all volatile registers are the
  inverse of writeable registers on this device.
renesas,rzg2l
- Use new adc-helpers to replace local parsing code for channel nodes.
ti,ads1298
- Fix a missing Kconfig dependency.

* tag 'iio-for-6.16a-take2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (260 commits)
  dt-bindings: iio: adc: Add ROHM BD79100G
  iio: adc: add support for Nuvoton NCT7201
  dt-bindings: iio: adc: add NCT7201 ADCs
  iio: chemical: Add driver for SEN0322
  dt-bindings: trivial-devices: Document SEN0322
  iio: adc: ad7768-1: reorganize driver headers
  iio: bmp280: zero-init buffer
  iio: ssp_sensors: optimalize -> optimize
  HID: sensor-hub: Fix typo and improve documentation
  iio: admv1013: replace redundant ternary operator with just len
  iio: chemical: mhz19b: Fix error code in probe()
  iio: adc: at91-sama5d2: use IIO_DECLARE_BUFFER_WITH_TS
  iio: accel: sca3300: use IIO_DECLARE_BUFFER_WITH_TS
  iio: adc: ad7380: use IIO_DECLARE_DMA_BUFFER_WITH_TS
  iio: adc: ad4695: rename AD4695_MAX_VIN_CHANNELS
  iio: adc: ad4695: use IIO_DECLARE_DMA_BUFFER_WITH_TS
  iio: introduce IIO_DECLARE_BUFFER_WITH_TS macros
  iio: make IIO_DMA_MINALIGN minimum of 8 bytes
  iio: pressure: zpa2326_spi: remove bits_per_word = 8
  iio: pressure: ms5611_spi: remove bits_per_word = 8
  ...

8 files changed, 136 insertions, 16 deletions

diff --git a/include/dt-bindings/iio/adc/adi,ad7606.h b/include/dt-bindings/iio/adc/adi,ad7606.h
new file mode 100644
index 000000000000..f38a6d72b6dc
--- /dev/null
+++ b/include/dt-bindings/iio/adc/adi,ad7606.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+
+#ifndef _DT_BINDINGS_ADI_AD7606_H
+#define _DT_BINDINGS_ADI_AD7606_H
+
+#define AD7606_TRIGGER_EVENT_BUSY	0
+#define AD7606_TRIGGER_EVENT_FRSTDATA	1
+
+#endif /* _DT_BINDINGS_ADI_AD7606_H */
diff --git a/include/linux/hid-sensor-hub.h b/include/linux/hid-sensor-hub.h
index c27329e2a5ad..e71056553108 100644
--- a/include/linux/hid-sensor-hub.h
+++ b/include/linux/hid-sensor-hub.h
@@ -17,7 +17,7 @@
  * @attrib_id:		Attribute id for this attribute.
  * @report_id:		Report id in which this information resides.
  * @index:		Field index in the report.
- * @units:		Measurment unit for this attribute.
+ * @units:		Measurement unit for this attribute.
  * @unit_expo:		Exponent used in the data.
  * @size:		Size in bytes for data size.
  * @logical_minimum:	Logical minimum value for this attribute.
@@ -39,8 +39,8 @@ struct hid_sensor_hub_attribute_info {
  * struct sensor_hub_pending - Synchronous read pending information
  * @status:		Pending status true/false.
  * @ready:		Completion synchronization data.
- * @usage_id:		Usage id for physical device, E.g. Gyro usage id.
- * @attr_usage_id:	Usage Id of a field, E.g. X-AXIS for a gyro.
+ * @usage_id:		Usage id for physical device, e.g. gyro usage id.
+ * @attr_usage_id:	Usage Id of a field, e.g. X-axis for a gyro.
  * @raw_size:		Response size for a read request.
  * @raw_data:		Place holder for received response.
  */
@@ -104,10 +104,10 @@ struct hid_sensor_hub_callbacks {
 int sensor_hub_device_open(struct hid_sensor_hub_device *hsdev);
 
 /**
-* sensor_hub_device_clode() - Close hub device
+* sensor_hub_device_close() - Close hub device
 * @hsdev:	Hub device instance.
 *
-* Used to clode hid device for sensor hub.
+* Used to close hid device for sensor hub.
 */
 void sensor_hub_device_close(struct hid_sensor_hub_device *hsdev);
 
@@ -128,12 +128,13 @@ int sensor_hub_register_callback(struct hid_sensor_hub_device *hsdev,
 			struct hid_sensor_hub_callbacks *usage_callback);
 
 /**
-* sensor_hub_remove_callback() - Remove client callbacks
+* sensor_hub_remove_callback() - Remove client callback
 * @hsdev:	Hub device instance.
-* @usage_id:	Usage id of the client (E.g. 0x200076 for Gyro).
+* @usage_id:	Usage id of the client (e.g. 0x200076 for gyro).
 *
-* If there is a callback registred, this call will remove that
-* callbacks, so that it will stop data and event notifications.
+* Removes a previously registered callback for the given usage_id
+* and hsdev. Once removed, the client will no longer receive data or
+* event notifications.
 */
 int sensor_hub_remove_callback(struct hid_sensor_hub_device *hsdev,
 			u32 usage_id);
diff --git a/include/linux/iio/adc-helpers.h b/include/linux/iio/adc-helpers.h
new file mode 100644
index 000000000000..56b092a2a4c4
--- /dev/null
+++ b/include/linux/iio/adc-helpers.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+/*
+ * The industrial I/O ADC firmware property parsing helpers
+ *
+ * Copyright (c) 2025 Matti Vaittinen <mazziesaccount@gmail.com>
+ */
+
+#ifndef _INDUSTRIAL_IO_ADC_HELPERS_H_
+#define _INDUSTRIAL_IO_ADC_HELPERS_H_
+
+#include <linux/property.h>
+
+struct device;
+struct iio_chan_spec;
+
+static inline int iio_adc_device_num_channels(struct device *dev)
+{
+	return device_get_named_child_node_count(dev, "channel");
+}
+
+int devm_iio_adc_device_alloc_chaninfo_se(struct device *dev,
+					  const struct iio_chan_spec *template,
+					  int max_chan_id,
+					  struct iio_chan_spec **cs);
+
+#endif /* _INDUSTRIAL_IO_ADC_HELPERS_H_ */
diff --git a/include/linux/iio/backend.h b/include/linux/iio/backend.h
index e45b7dfbec35..e59d909cb659 100644
--- a/include/linux/iio/backend.h
+++ b/include/linux/iio/backend.h
@@ -84,6 +84,7 @@ enum iio_backend_interface_type {
  * @chan_disable: Disable one channel.
  * @data_format_set: Configure the data format for a specific channel.
  * @data_source_set: Configure the data source for a specific channel.
+ * @data_source_get: Data source getter for a specific channel.
  * @set_sample_rate: Configure the sampling rate for a specific channel.
  * @test_pattern_set: Configure a test pattern.
  * @chan_status: Get the channel status.
@@ -115,6 +116,8 @@ struct iio_backend_ops {
 			       const struct iio_backend_data_fmt *data);
 	int (*data_source_set)(struct iio_backend *back, unsigned int chan,
 			       enum iio_backend_data_source data);
+	int (*data_source_get)(struct iio_backend *back, unsigned int chan,
+			       enum iio_backend_data_source *data);
 	int (*set_sample_rate)(struct iio_backend *back, unsigned int chan,
 			       u64 sample_rate_hz);
 	int (*test_pattern_set)(struct iio_backend *back,
@@ -176,6 +179,8 @@ int iio_backend_data_format_set(struct iio_backend *back, unsigned int chan,
 				const struct iio_backend_data_fmt *data);
 int iio_backend_data_source_set(struct iio_backend *back, unsigned int chan,
 				enum iio_backend_data_source data);
+int iio_backend_data_source_get(struct iio_backend *back, unsigned int chan,
+				enum iio_backend_data_source *data);
 int iio_backend_set_sampling_freq(struct iio_backend *back, unsigned int chan,
 				  u64 sample_rate_hz);
 int iio_backend_test_pattern_set(struct iio_backend *back,
diff --git a/include/linux/iio/buffer.h b/include/linux/iio/buffer.h
index 3b8d618bb3df..5c84ec4a9810 100644
--- a/include/linux/iio/buffer.h
+++ b/include/linux/iio/buffer.h
@@ -45,6 +45,18 @@ static inline int iio_push_to_buffers_with_timestamp(struct iio_dev *indio_dev,
 	return iio_push_to_buffers(indio_dev, data);
 }
 
+static inline int iio_push_to_buffers_with_ts(struct iio_dev *indio_dev,
+					      void *data, size_t data_total_len,
+					      s64 timestamp)
+{
+	if (unlikely(data_total_len < indio_dev->scan_bytes)) {
+		dev_err(&indio_dev->dev, "Undersized storage pushed to buffer\n");
+		return -ENOSPC;
+	}
+
+	return iio_push_to_buffers_with_timestamp(indio_dev, data, timestamp);
+}
+
 int iio_push_to_buffers_with_ts_unaligned(struct iio_dev *indio_dev,
 					  const void *data, size_t data_sz,
 					  int64_t timestamp);
diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h
index 07a0e8132e88..d11668f14a3e 100644
--- a/include/linux/iio/iio.h
+++ b/include/linux/iio/iio.h
@@ -7,9 +7,11 @@
 #ifndef _INDUSTRIAL_IO_H_
 #define _INDUSTRIAL_IO_H_
 
+#include <linux/align.h>
 #include <linux/device.h>
 #include <linux/cdev.h>
 #include <linux/compiler_types.h>
+#include <linux/minmax.h>
 #include <linux/slab.h>
 #include <linux/iio/types.h>
 /* IIO TODO LIST */
@@ -659,8 +661,8 @@ void iio_device_unregister(struct iio_dev *indio_dev);
 int __devm_iio_device_register(struct device *dev, struct iio_dev *indio_dev,
 			       struct module *this_mod);
 int iio_push_event(struct iio_dev *indio_dev, u64 ev_code, s64 timestamp);
-int iio_device_claim_direct_mode(struct iio_dev *indio_dev);
-void iio_device_release_direct_mode(struct iio_dev *indio_dev);
+bool __iio_device_claim_direct(struct iio_dev *indio_dev);
+void __iio_device_release_direct(struct iio_dev *indio_dev);
 
 /*
  * Helper functions that allow claim and release of direct mode
@@ -671,9 +673,7 @@ void iio_device_release_direct_mode(struct iio_dev *indio_dev);
  */
 static inline bool iio_device_claim_direct(struct iio_dev *indio_dev)
 {
-	int ret = iio_device_claim_direct_mode(indio_dev);
-
-	if (ret)
+	if (!__iio_device_claim_direct(indio_dev))
 		return false;
 
 	__acquire(iio_dev);
@@ -683,7 +683,7 @@ static inline bool iio_device_claim_direct(struct iio_dev *indio_dev)
 
 static inline void iio_device_release_direct(struct iio_dev *indio_dev)
 {
-	iio_device_release_direct_mode(indio_dev);
+	__iio_device_release_direct(indio_dev);
 	__release(indio_dev);
 }
 
@@ -777,8 +777,45 @@ static inline void *iio_device_get_drvdata(const struct iio_dev *indio_dev)
  * to in turn include IIO_DMA_MINALIGN'd elements such as buffers which
  * must not share  cachelines with the rest of the structure, thus making
  * them safe for use with non-coherent DMA.
+ *
+ * A number of drivers also use this on buffers that include a 64-bit timestamp
+ * that is used with iio_push_to_buffer_with_ts(). Therefore, in the case where
+ * DMA alignment is not sufficient for proper timestamp alignment, we align to
+ * 8 bytes instead.
+ */
+#define IIO_DMA_MINALIGN MAX(ARCH_DMA_MINALIGN, sizeof(s64))
+
+#define __IIO_DECLARE_BUFFER_WITH_TS(type, name, count) \
+	type name[ALIGN((count), sizeof(s64) / sizeof(type)) + sizeof(s64) / sizeof(type)]
+
+/**
+ * IIO_DECLARE_BUFFER_WITH_TS() - Declare a buffer with timestamp
+ * @type: element type of the buffer
+ * @name: identifier name of the buffer
+ * @count: number of elements in the buffer
+ *
+ * Declares a buffer that is safe to use with iio_push_to_buffer_with_ts(). In
+ * addition to allocating enough space for @count elements of @type, it also
+ * allocates space for a s64 timestamp at the end of the buffer and ensures
+ * proper alignment of the timestamp.
+ */
+#define IIO_DECLARE_BUFFER_WITH_TS(type, name, count) \
+	__IIO_DECLARE_BUFFER_WITH_TS(type, name, count) __aligned(sizeof(s64))
+
+/**
+ * IIO_DECLARE_DMA_BUFFER_WITH_TS() - Declare a DMA-aligned buffer with timestamp
+ * @type: element type of the buffer
+ * @name: identifier name of the buffer
+ * @count: number of elements in the buffer
+ *
+ * Same as IIO_DECLARE_BUFFER_WITH_TS(), but is uses __aligned(IIO_DMA_MINALIGN)
+ * to ensure that the buffer doesn't share cachelines with anything that comes
+ * before it in a struct. This should not be used for stack-allocated buffers
+ * as stack memory cannot generally be used for DMA.
  */
-#define IIO_DMA_MINALIGN ARCH_DMA_MINALIGN
+#define IIO_DECLARE_DMA_BUFFER_WITH_TS(type, name, count) \
+	__IIO_DECLARE_BUFFER_WITH_TS(type, name, count) __aligned(IIO_DMA_MINALIGN)
+
 struct iio_dev *iio_device_alloc(struct device *parent, int sizeof_priv);
 
 /* The information at the returned address is guaranteed to be cacheline aligned */
diff --git a/include/linux/iio/timer/stm32-lptim-trigger.h b/include/linux/iio/timer/stm32-lptim-trigger.h
index a34dcf6a6001..ce3cf0addb2e 100644
--- a/include/linux/iio/timer/stm32-lptim-trigger.h
+++ b/include/linux/iio/timer/stm32-lptim-trigger.h
@@ -14,6 +14,15 @@
 #define LPTIM1_OUT	"lptim1_out"
 #define LPTIM2_OUT	"lptim2_out"
 #define LPTIM3_OUT	"lptim3_out"
+#define LPTIM4_OUT	"lptim4_out"
+#define LPTIM5_OUT	"lptim5_out"
+
+#define LPTIM1_CH1	"lptim1_ch1"
+#define LPTIM1_CH2	"lptim1_ch2"
+#define LPTIM2_CH1	"lptim2_ch1"
+#define LPTIM2_CH2	"lptim2_ch2"
+#define LPTIM3_CH1	"lptim3_ch1"
+#define LPTIM4_CH1	"lptim4_ch1"
 
 #if IS_REACHABLE(CONFIG_IIO_STM32_LPTIMER_TRIGGER)
 bool is_stm32_lptim_trigger(struct iio_trigger *trig);
diff --git a/include/linux/property.h b/include/linux/property.h
index e214ecd241eb..3e83babac0b0 100644
--- a/include/linux/property.h
+++ b/include/linux/property.h
@@ -167,6 +167,10 @@ struct fwnode_handle *fwnode_get_next_available_child_node(
 	for (child = fwnode_get_next_child_node(fwnode, NULL); child;	\
 	     child = fwnode_get_next_child_node(fwnode, child))
 
+#define fwnode_for_each_named_child_node(fwnode, child, name)		\
+	fwnode_for_each_child_node(fwnode, child)			\
+		if (!fwnode_name_eq(child, name)) { } else
+
 #define fwnode_for_each_available_child_node(fwnode, child)		       \
 	for (child = fwnode_get_next_available_child_node(fwnode, NULL); child;\
 	     child = fwnode_get_next_available_child_node(fwnode, child))
@@ -178,11 +182,19 @@ struct fwnode_handle *device_get_next_child_node(const struct device *dev,
 	for (child = device_get_next_child_node(dev, NULL); child;	\
 	     child = device_get_next_child_node(dev, child))
 
+#define device_for_each_named_child_node(dev, child, name)		\
+	device_for_each_child_node(dev, child)				\
+		if (!fwnode_name_eq(child, name)) { } else
+
 #define device_for_each_child_node_scoped(dev, child)			\
 	for (struct fwnode_handle *child __free(fwnode_handle) =	\
 		device_get_next_child_node(dev, NULL);			\
 	     child; child = device_get_next_child_node(dev, child))
 
+#define device_for_each_named_child_node_scoped(dev, child, name)	\
+	device_for_each_child_node_scoped(dev, child)			\
+		if (!fwnode_name_eq(child, name)) { } else
+
 struct fwnode_handle *fwnode_get_named_child_node(const struct fwnode_handle *fwnode,
 						  const char *childname);
 struct fwnode_handle *device_get_named_child_node(const struct device *dev,
@@ -210,6 +222,14 @@ int fwnode_irq_get_byname(const struct fwnode_handle *fwnode, const char *name);
 
 unsigned int device_get_child_node_count(const struct device *dev);
 
+unsigned int fwnode_get_named_child_node_count(const struct fwnode_handle *fwnode,
+					       const char *name);
+static inline unsigned int device_get_named_child_node_count(const struct device *dev,
+							     const char *name)
+{
+	return fwnode_get_named_child_node_count(dev_fwnode(dev), name);
+}
+
 static inline int device_property_read_u8(const struct device *dev,
 					  const char *propname, u8 *val)
 {