Merge tag 'asoc-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v6.9

This has been quite a small release, there's a lot of driver specific
cleanups and minor enhancements but hardly anything on the core and only
one new driver.  Highlights include:

 - SoundWire support for AMD ACP 6.3 systems.
 - Support for reporting version information for AVS firmware.
 - Support DSPless mode for Intel Soundwire systems.
 - Support for configuring CS35L56 amplifiers using EFI calibration
   data.
 - Log which component is being operated on as part of power management
   trace events.
 - Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x

3 files changed, 11 insertions, 8 deletions

diff --git a/include/uapi/linux/iio/types.h b/include/uapi/linux/iio/types.h
index 5060963707b1..f2e0b2d50e6b 100644
--- a/include/uapi/linux/iio/types.h
+++ b/include/uapi/linux/iio/types.h
@@ -91,8 +91,6 @@ enum iio_modifier {
 	IIO_MOD_CO2,
 	IIO_MOD_VOC,
 	IIO_MOD_LIGHT_UV,
-	IIO_MOD_LIGHT_UVA,
-	IIO_MOD_LIGHT_UVB,
 	IIO_MOD_LIGHT_DUV,
 	IIO_MOD_PM1,
 	IIO_MOD_PM2P5,
@@ -107,6 +105,8 @@ enum iio_modifier {
 	IIO_MOD_PITCH,
 	IIO_MOD_YAW,
 	IIO_MOD_ROLL,
+	IIO_MOD_LIGHT_UVA,
+	IIO_MOD_LIGHT_UVB,
 };
 
 enum iio_event_type {
diff --git a/include/uapi/linux/netfilter/nf_tables.h b/include/uapi/linux/netfilter/nf_tables.h
index ca30232b7bc8..117c6a9b845b 100644
--- a/include/uapi/linux/netfilter/nf_tables.h
+++ b/include/uapi/linux/netfilter/nf_tables.h
@@ -285,9 +285,11 @@ enum nft_rule_attributes {
 /**
  * enum nft_rule_compat_flags - nf_tables rule compat flags
  *
+ * @NFT_RULE_COMPAT_F_UNUSED: unused
  * @NFT_RULE_COMPAT_F_INV: invert the check result
  */
 enum nft_rule_compat_flags {
+	NFT_RULE_COMPAT_F_UNUSED = (1 << 0),
 	NFT_RULE_COMPAT_F_INV	= (1 << 1),
 	NFT_RULE_COMPAT_F_MASK	= NFT_RULE_COMPAT_F_INV,
 };
diff --git a/include/uapi/linux/serial.h b/include/uapi/linux/serial.h
index 9086367db043..de9b4733607e 100644
--- a/include/uapi/linux/serial.h
+++ b/include/uapi/linux/serial.h
@@ -145,12 +145,13 @@ struct serial_rs485 {
 #define SER_RS485_ENABLED		_BITUL(0)
 #define SER_RS485_RTS_ON_SEND		_BITUL(1)
 #define SER_RS485_RTS_AFTER_SEND	_BITUL(2)
-#define SER_RS485_RX_DURING_TX		_BITUL(3)
-#define SER_RS485_TERMINATE_BUS		_BITUL(4)
-#define SER_RS485_ADDRB			_BITUL(5)
-#define SER_RS485_ADDR_RECV		_BITUL(6)
-#define SER_RS485_ADDR_DEST		_BITUL(7)
-#define SER_RS485_MODE_RS422		_BITUL(8)
+/* Placeholder for bit 3: SER_RS485_RTS_BEFORE_SEND, which isn't used anymore */
+#define SER_RS485_RX_DURING_TX		_BITUL(4)
+#define SER_RS485_TERMINATE_BUS		_BITUL(5)
+#define SER_RS485_ADDRB			_BITUL(6)
+#define SER_RS485_ADDR_RECV		_BITUL(7)
+#define SER_RS485_ADDR_DEST		_BITUL(8)
+#define SER_RS485_MODE_RS422		_BITUL(9)
 
 	__u32	delay_rts_before_send;
 	__u32	delay_rts_after_send;